summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2016-12-14classes/base: fix license file checksumming when source not under TMPDIRPaul Eggleton1
With the changes to the code for extracting source for a recipe, we are properly executing the tasks for a recipe, which means their stamps (and therefore signatures) are important. When running devtool extract on the lsof recipe I noticed that do_fetch and do_unpack were executing a second time when we called for do_patch, and this turned out to be because LIC_FILES_CHKSUM in that recipe contains an entry which is an absolute path (has ${S} at the start). Normally this wouldn't be an issue since S is under TMPDIR and thus the existing code would ignore it, however devtool's extraction code extracts to a temporary directory which is not under TMPDIR; the result was the path to this file was not being ignored and the second time around when the license file had been extracted it was incorporated into the signature. We don't want this, so explicitly exclude S as well as B and WORKDIR for good measure. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-14devtool / recipetool: use tinfoil parsing APIPaul Eggleton7
Use Tinfoil.parse_recipe_file() and Tinfoil.parse_recipe() instead of the recipeutils equivalents, and replace any local duplicate implementations. This not only tidies up the code but also allows these calls to work in memres mode. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-14oe-selftest: use tinfoil.parse_recipe()Paul Eggleton1
Use tinfoil.parse_recipe() in order to allow oe-selftest to be used in memres mode. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-14oe-selftest: make tinfoil quiet when using to start QEMUPaul Eggleton1
We don't need to see the parsing/cache loading message in the oe-selftest output, so use the newly added quiet option to disable it. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-14lib/oe/recipeutils: use cooker function instead of bb.providersPaul Eggleton1
We now have a function in cooker itself that can do this lookup; additionally, the rewritten tinfoil's cooker adapter has its own implementation that can work remotely, so if we use it then this function can work in that scenario as well. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-14devtool: package: don't try to initialise tinfoil twicePaul Eggleton1
setup_tinfoil() already calls prepare(), we don't need to call it again ourselves and doing so with tinfoil2 results in "ERROR: Only one copy of bitbake should be run against a build directory". Calling prepare() twice should probably still be allowed, so that ought to be fixed separately, but in the mean time this code is still wrong so fix it here. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-14classes/image: suppress log_check mechanism for warnings/errors logged ↵Paul Eggleton2
through BitBake If you printed a warning through bb.warn() / bbwarn or an error through bb.error() / bberror, this was also being picked up by our log_check mechanism that was designed to pick up warnings and errors printed by other programs used during do_rootfs. This meant you saw not only the warning or error itself, you saw it a second time through log_check, which is a bit ugly. Use the just-added BB_TASK_LOGGER to access the logger and add a handler that we can use to find out if any warning or error we find in the logs is one we should ignore as it has already been printed. Fixes [YOCTO #8223]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-14lib/oe/rootfs: fix log_check warnings being printed twice with RPM packagingPaul Eggleton1
We were calling _log_check() in the RPM-specific rootfs class as well as in the base class; this is unnecessary and resulted in any errors/warnings generated during the actual package installation time triggering two warnings instead of one. Drop the call from RpmRootfs._create() to fix this. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-14oe-pkgdata-util: Make read-value handle override variablesOla x Nilsson2
Some variables in pkgdata files have a package-name override. When the bare variable can not be found, try with the override-variant. PKGSIZE is one such variable, and already had special code to handle this. Test included. Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13libpcap: Disable exposed bits of WinPCAP remote capture supportFabio Berton2
Disable bits of remote capture support inherited from the WinPCAP merge which cause applications to fails to build if they define HAVE_REMOTE. Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13xf86-input-libinput: Upgrade 0.22 -> 0.23Jussi Kukkonen1
Bug fixes + libinput now supports tablets (but wacom driver is used instead if it is installed). Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13xf86-video-vmware: Upgrade 13.1.0 -> 13.2.1Jussi Kukkonen2
Bug fixes, ABI 23 support. Rebase the add-option-for-vmwgfx patch. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13xf86-video-omap: Upgrade 0.4.4 -> 0.4.5Jussi Kukkonen1
Support ABI 23. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13xf86-input-synaptics: Remove git recipeJussi Kukkonen1
Last source revision is from 8 years ago. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13xf86-input-synaptics: Upgrade 1.8.3 -> 1.9.0Jussi Kukkonen1
Bug fixes, new hw support, support for XINPUT ABI 23. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13xf86-input-mouse: Remove git recipeJussi Kukkonen1
Last used revision is from 8 years ago. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13xf86-input-mouse: Upgrade 1.9.1 -> 1.9.2Jussi Kukkonen1
Tiny update with ABI 23/24 support. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13xf86-input-keyboard: Remove git recipeJussi Kukkonen1
Last used revision was from 8 years ago. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13xf86-input-keyboard: Upgrade 1.8.1 -> 1.9.0Jussi Kukkonen1
Small update with ABI 23 support. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13xf86-input-evdev: Upgrade 2.10.3 -> 2.10.4Jussi Kukkonen1
Tiny update to XINPUT ABI 24. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13xserver-xorg: Upgrade 1.18.4 -> 1.19.0Jussi Kukkonen4
* xserver depends on xfont2 now. * xwayland support requires wayland-scanner: Add patch to find wayland-scanner and protocol files while cross-compiling. * patch MONOTONIC_CLOCK check so it works when cross-compiling (otherwise we always end with no monotonic clock and xwayland compile fails) * Add vardepsexclude for MACHINE to ensure consistent hashes (RB) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13libxfont2: Add recipeJussi Kukkonen1
This is the same old libxfont but with a new API. xserver-xorg 1.19 depends on libxfont2. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13gcr: add missing dependencies for vapiJackie Huang2
According to the vapi_DEPS definition: gcr-3.vapi depends on gck-1.vapi, gcr-ui-3.vapi depends on gck-1.vapi and gcr-3.vapi But these dependencies are missing for the make targets, so it will fail when build in parallel: error: Package `gck-1' not found in specified Vala API directories or GObject-Introspection GIR directories error: Package `gcr-3' not found in specified Vala API directories or GObject-Introspection GIR directories Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13libtiff: Update to 4.0.7Armin Kuster20
Major changes: The libtiff tools bmp2tiff, gif2tiff, ras2tiff, sgi2tiff, sgisv, and ycbcr are completely removed from the distribution, used for demos. CVEs fixed: CVE-2016-9297 CVE-2016-9448 CVE-2016-9273 CVE-2014-8127 CVE-2016-3658 CVE-2016-5875 CVE-2016-5652 CVE-2016-3632 plus more that are not identified in the changelog. removed patches integrated into update. more info: http://libtiff.maptools.org/v4.0.7.html Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13parselogs.py: Don't clog QA with Joule errorsCalifornia Sullivan1
The Joule is very new hardware and there is ongoing kernel and firmware work to fix these issues, which will be available in future kernel and firmware releases. In the meantime, don't clog QA reports. [YOCTO #10611] Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13kernel-yocto: explicitly trap subcommand errorsBruce Ashfield1
To trap errors and halt processing, do_kernel_metadata was recently switched to exit on any non zero return code. While the concept is sound, there are subcommands that have legitimate non-zero return codes. Instead of removing set +e, we'll explicitly check the return code of the commands that can error, and throw a bbfatal to alert the user. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13linux-yocto/4.8: update to -rt7Bruce Ashfield3
Updating to the latest 4.8-rt Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13glibc: Enable backtrace from abort on ARMYuanjie Huang1
ARM stack frames for abort and raise were limited to the the actual abort and raise call, such as: Obtained 4 stack frames. ./test-app(print_trace+0x1c) [0x10a08] ./test-app() [0x10b3c] /lib/libc.so.6(__default_sa_restorer+0) [0x4adae1e0] /lib/libc.so.6(gsignal+0xa0) [0x4adacf74] This is not terribly useful when trying to figure out what function may have called called the abort, especially when using pthreads. After the change the trace would now look like: Obtained 8 stack frames. ./test-app(print_trace+0x1c) [0x10a08] ./test-app() [0x10b3c] /lib/libc.so.6(__default_sa_restorer+0) [0x4befe1e0] /lib/libc.so.6(gsignal+0xa0) [0x4befcf74] /lib/libc.so.6(abort+0x134) [0x4befe358] ./test-app(dummy_function+0x50) [0x10adc] ./test-app(main+0xd4) [0x10c24] /lib/libc.so.6(__libc_start_main+0x114) [0x4bee7a58] Signed-off-by: Yuanjie Huang <yuanjie.huang@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13oe-buildenv-internal: show usage outputEd Bartosh1
Show usage text if script is not sourced. Tested in bash, zsh and dash. [YOCTO #10751] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13systemd: Backport cgroup fix from 233 to 232Jason Wessel2
There is a critical regression in the default behavior with systemd 232 which prevents lxc, docker, and opencontainers from working properly out of the box. The change was already committed to the systemd 233 code stream. The failure looks like what is shown below. % lxc-start -n container -F lxc-start: cgfsng.c: parse_hierarchies: 825 Failed to find current cgroup for controller 'name=systemd' lxc-start: cgfsng.c: all_controllers_found: 431 no systemd controller mountpoint found lxc-start: start.c: lxc_spawn: 1082 failed initializing cgroup support lxc-start: start.c: __lxc_start: 1332 failed to spawn 'container' lxc-start: lxc_start.c: main: 344 The container failed to start. lxc-start: lxc_start.c: main: 348 Additional information can be obtained by setting the --logfile and --logpriority options. Commit 843d5baf6aad6c53fc00ea8d95d83209a4f92de1 from the systemd git has been backported and can be dropped in a future uprev. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13oe-find-native-sysroot: create usage outputEd Bartosh1
Created usage output for oe-find-native-sysroot script. [YOCTO #10751] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13oe-git-proxy: create usage outputEd Bartosh1
Created usage output for oe-git-proxy script. [YOCTO #10751] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13oepydevshell-internal.py: standardize usage outputEd Bartosh1
Made usage output of oepydevshell-internal.py to look similar to the output of other oe scripts. [YOCTO #10751] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13oe-setup-builddir: create usage outputEd Bartosh1
Created usage output for oe-setup-builddir script. [YOCTO #10751] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13oe-setup-rpmrepo: standardize usage outputEd Bartosh1
Made usage output of oe-setup-rpmrepo to look similar to the output of other oe scripts. [YOCTO #10751] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13gstreamer-vaapi-1.0: check for "opengl" featureIsmo Puustinen1
If "opengl" distro feature is not set, libva recipe is skipped. Since missing libva breaks gstreamer-vaapi-1.0 build, the same check has to be done in gstreamer-vaapi-1.0 recipe too. Signed-off-by: Ismo Puustinen <ismo.puustinen@intel.com> Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13puzzles: Upgrade and fix with clangKhem Raj3
Delete upstreamed patches Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13gstreamer1.0-vaapi: Import from meta-intelKhem Raj3
Update to 1.10.1 at the same time Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13gstreamer1.0-rtsp-server: Add libcheck to depsKhem Raj1
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13gstreamer1.0-plugins-bad: Define and use WAYLAND_PROTOCOLS_SYSROOT_DIR for ↵Khem Raj3
output of pkg-config When configure pokes for wayland-protocols isntallations it ended up using the ones from host, which is because it did not account for sysroot prefix Remove MACHINE from variable reference tracking to avoid unnessary rebuilds for different machine with same arch Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13systemd-boot: Use PV in recipe nameKhem Raj1
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13gstreamer1.0: Upgrade to 1.10.1Khem Raj19
Remove backported patches and upstreamed ones Drop --disable-trace its no more in 1.10.x Add packageconfig option for kms, keep it disabled by default in bad plugins recipe Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13rm_work: add do_write_qemuboot_conf to task listRoss Burton1
We need to add do_write_qemuboot_conf to the list of tasks to be wiped as otherwise the second time an image is built it will fail. [ YOCTO #10758 ] Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13buildstats.py: skip collecting unavailable /proc dataPatrick Ohly1
Some virtualized environments like Linux-VServer do not have the entries under /proc that the new system usage sampling expected, leading to an exception when trying to open the files. Now the presence of these files is checked once before enabling the corresponding data collection. When a file is missing, the corresponding log file is not written either and pybootchart will not draw the chart that normally displays the data. Errors while reading or writing of data samples is intentionally still a fatal error, because that points towards a bigger problem that should not be ignored. Reported-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13libva: check for "opengl" featureIsmo Puustinen1
In case "opengl" is missing from DISTRO_FEATURES, libva fails to satisfy its dependencies. The dependency check is done by BitBake when meta-world-pkgdata gathers information about all available packages during image builds, even if libva isn't included in the build. This patch makes libva recipe be skipped if the "opengl" DISTRO_FEATURE isn't found. Signed-off-by: Ismo Puustinen <ismo.puustinen@intel.com> Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13Use weak assignment for SERIAL_CONSOLES in qemu configuration filesChen Qi7
Use weak assignment for SERIAL_CONSOLES in qemu configuration files so that the value could serve as a default value and could be easily overridden in configuration files like local.conf. When using the default value for SERIAL_CONSOLES in qemux86-64,we would have annoying messages on console complaining about respawning getty on ttyS1. Although the value is set by purpose, at least we need to provide an easy way to override it. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13archiver: don't change directory when generating tarballRoss Burton1
There's no need to chdir() as tarfile.add() can be told what name to use in the archive. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13oe-trim-schemas: create usage outputEd Bartosh1
Created usage output for oe-trim-schemas script. [YOCTO #10751] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13oe-run-native: standardize usage outputEd Bartosh1
Made usage output of oe-run-native to look similar to the output of other oe scripts. [YOCTO #10751] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-13recipetool: Load plugins in a well defined orderOla x Nilsson1
To allow recipetool plugins in one layer to shadow another in a well defined way, first search BBPATH/lib/recipetool directories and then scripts/lib/recipetool and load only the first found. The previous search and load loop would load all found plugins with the ones found later replacing any found before. Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 06:15:30 +0000