summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2013-08-13rpm: Enable compatibility with older RPM packages that have invalid platformsMark Hatle2
Some LSB packages appear to have the platform set to '%{_target_platform}' which is not a valid platform field. This causes a failure of the type: warning: package lsb-test-core-4.1.15-1.x86_64 is intended for a %{_target_platform} platform When we detect an invalid platform, fall back and try to construct a new platform name that may be valid based on the arch and os contents of the package. (This should only ever be needed by invalid or older RPM packages.) Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13rpm: Change references from RPM_VENDOR_POKY to RPM_VENDOR_OEMark Hatle6
Change the #define references to match RPM_VENDOR_OE. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13linux-dtb.inc: Replace /boot/ with /${KERNEL_IMAGEDEST}/Mike Looijmans1
Devicetree files were installed hard-coded in /boot. When KERNEL_IMAGEDEST is anything else but "boot", the postinstall script and the file locations no longer match and the postinstall will fail. Replace "boot" with "${KERNEL_IMAGEDEST}" to fix this problem, and to allow the devicetree files to be installed in another location. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13grub_0.97: Fix to correctly ship files under /usr/libChen Qi1
The grub_fix_for_automake-1.12.patch replaced pkglib with pkgdata to make grub_0.97 build with automake-1.12. However, it forgot to set up the pkgdatadir, thus causing grub_0.97 not shipping files under /usr/lib. This in turn resulted in an unworkable grub. This patch fixes this problem by setting up the pkgdatadir correctly. [YOCTO #4997] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13lib/oeqa/runtime: add new systemd testsAlexandru Palalau1
New systemd runtime tests for enable/disable service, start/stop service and list services. Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13lib/oeqa/runtime: rework syslog testStefan Stanacar1
Add separate tests for restarting syslog and using logger, and skip the configuration test for systemd images which always fail because syslog's systemd service doesn't read a config by default (see YB#4860). Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13oeqa/utils/qemurunner: get ip old fashioned way and use tcp serial consoleStefan Stanacar2
The way we read data from the serial console was unreliable and blocking (AutoBuilder seems to hit that often), so change the serial console type from unix socket to tcp and reverse the connection - don't let qemu act as server (wait for a connection). So now the serial console is used to save the boot log and make sure that we reached the login prompt. Until a better way is found this should solve some of the AutoBuilder failures (one being YB#4904). Also we need to use the same method as the old qemuimagetest to get the ip (from the qemu process arguments), because that it's more reliable. The first version used here was to log into the target and use the output of "ip addr show eth0" but then systemd decides that it should rename interfaces, so that was changed to get the ip of the interface that has the default gw, but if there is no default gw we'll get the loopback ip and we end up trying to ssh into the host machine (some recent AutoBuilder runs showed that). Changed in V2: - use -ww for ps, as output might get truncated Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13classes/testimage: create a link for qemu boot logStefan Stanacar1
The full name for the log is confusing when there are multiple files. Also move the ssh log path stuff where it's needed. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13mesa: fix and enable out-of-tree buildsRoss Burton5
One patch (submitted upstream) for when Gallium is enabled, and another (inappropriate for upstream) to fix out-of-tree builds with 0003-EGL-Mutate-NativeDisplayType-depending-on-config. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13gst-ffmpeg: set SUMMARY instead of DESCRIPTIONPaul Eggleton1
We only have a short description, so set SUMMARY and DESCRIPTION will be defaulted from it. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13gst-ffmpeg: enable using yasm during buildPaul Eggleton1
A recipe is now available for this, and it should enhance performance on x86/x86-64. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13gst-ffmpeg: merge in bbappend from meta-oePaul Eggleton1
* Enable external libav for better optimisations/additional bugfixes (internal ffmpeg copy is quite old), default enabled but can be disabled using PACKAGECONFIG * Add a PACKAGECONFIG for orc, disabled by default in line with other gstreamer recipes * Bump PR to r7 so the bbappend can be dropped without PR going backwards Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13libav: add from meta-oe, update and tweakPaul Eggleton4
Changes from the meta-oe recipe: * Update stable recipe to 0.8.8 * Update git recipe to the tag for 9.8 (for now) * Switch over to a tarball for the release version recipe * Add LICENSE_FLAGS = "commercial" * Set SUMMARY instead of DESCRIPTION * Add yasm-native to DEPENDS since there is now a recipe for it * Remove libvpx from DEPENDS and add a PACKAGECONFIG option for it, disabled by default since it wasn't actually being enabled * Add a PACKAGECONFIG option for x11 to enable/disable x11grab, and add the proper DEPENDS if so (still defaults to enabled) * Add a number of other PACKAGECONFIG options, replacing some old comments as well as offering the ability to disable x264. * Hide text relocation warning when building for i586 (PIC can't be enabled for 32-bit x86). * Drop PR Notes for the git recipe: * This hasn't been able to be built recently in meta-oe since there was a circular dependency between libav and libpostproc. libpostproc is part of libav 0.8.x but was split out in 9+ and is not needed at all anymore by libav itself, so this dependency was removed. * Additionally the recipe was filtering out the option to enable libpostproc but this option wasn't being added by the inc file and thus the filter wasn't doing anything, so I dropped this as well. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13x264: add from meta-oe, update and tweakPaul Eggleton2
This is required by the default configuration of libav being brought over from meta-oe. Changes from the meta-oe recipe: * Update to the latest revision from the stable branch (upstream does not seem to provide stable releases.) * Add LICENSE_FLAGS = "commercial" * Enable PIC to fix text relocation warnings and disable warning for i586 (since PIC can't be used there) * Make SUMMARY value slightly shorter * Indent SRC_URI consistently with other recipes in OE-Core Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-13yasm: add from meta-oe and tweakPaul Eggleton1
This is needed for x264. Enabling it for libav also improves performance on x86 and x86-64. Two minor changes from the meta-oe recipe: * Set SUMMARY instead of DESCRIPTION * Drop setting of S - it was setting it to the same as the default Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09checkroot.sh: respect the value of ENABLE_ROOTFS_FSCKChen Qi1
Previously, fsck is always disabled because the value of rootcheck in the checkroot.sh script is always set to 'no'. We should respect the value of ENABLE_ROOTFS_FSCK in /etc/default/rcS to allow for filesystem check. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09build-appliance-image: upgrade to ac60aa8cf707eec58e2cb51e7c406250d0b43ef1 ↵Cristian Iorga1
commit. Fixes [YOCTO #4977]. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09mkfontscale: upgrade to 1.1.1Cristiana Voicu1
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09ed: upgrade to 1.9Cristiana Voicu1
LIC_FILES_CHKSUM changed because some lines were in addition in main.c file. Those lines are related to exit status. Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09systemtap: fix build failure on host system with dyninst installedVictor Kamensky1
On host system where dyninst installed (i.e Fedora 18 with SystemTap) builds fails with the error from do_qa_configure "This autoconf log indicates errors, it looked at host include and/or library paths while determining system capabilities." Problematic config.log indicates inclusion of /usr/include/dyninst/dyntypes.h Fix for now - disable dyninst in oe builds Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09busybox: remove syslog-startup.conf if sysvinit not in DISTRO_FEATURESChen Qi1
sysvinit and systemd have different ideas about configuration files (or environment files in systemd), so basically we can't use the same one in both cases. To avoid confusion, this patch removes syslog-startup.conf if 'sysvinit' is not in DISTRO_FEATURES. [YOCTO #4837] [YOCTO #4860] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09qemu: pass CFLAGS via ./configure instead of a patchRiku Voipio2
OE carries a patch to pass CFLAGS to qemu. However, we can avoid patching by passing CFLAGS with qemu's --extra-cflags option. Tested that building qemu-native still works without zlib-dev on host, and that qemu builds. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09separatebuilddir: add commentsRoss Burton1
Add a comment explaining the libproxy failure, and note that wpa-supplicant doesn't support B!=S. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09tzdata: upgrade to 2013dCristiana Voicu2
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> [sgw: Fix up tzdata to 2013d] Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09gst-fluendo-mpegdemux: upgrade to v0.10.72Cristian Iorga1
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09net-tools: upgrade to v1.60-25Cristian Iorga3
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09sudo: quote BUILD_CCKai Kang1
BUILD_CC is assigned to CC when do compile. If BUILD_CC has multi-items such as "ccache gcc", compilation fails with: make: *** No rule to make target `gcc'. Stop. Double quote BUILD_CC to avoid this error. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09bash: reference acl*.m4 from ${S}Bian Naimeng1
bash: reference acl*.m4 from ${S}. The build directory had been moved to ${WORKDIR}/build, so we should reference acl*.m4 from ${S}. Otherwise, the following configure error will be caught. | cat: aclocal.m4: No such file or directory | ERROR: Function failed: do_configure (log file is located at ...) Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09buildhistory: use bb.utils.mkdirhier instead of os.makedirsMartin Jansa1
* Multiple do_fetch[prefunc] can happen at the same time and if not os.path.exists(pkghistdir): os.makedirs(pkghistdir) isn't safe * Use bb.utils.mkdirhier which doesn't raise error when directory exists Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-09buildhistory: use package_qa_handle_error for version-going-backwardsMartin Jansa2
* this way it's easier for distro to select if such issue should be error, warning or ignored and also it gets recorded in qa.log Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-07subversion: Add patch to use neon 0.30Saul Wold2
The neon update is not recognized but subversion, so we need to patch the configure.ac to know about 0.30, otherwise we don't have http/https support in subversion. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-05man-pages: upgrade to 3.53Saul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05util-linux: upgrade to 2.23.2Saul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05mc: upgrade to 4.8.10Saul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05list-packageconfig-flags.py: add a script to list all PACKAGECONFIG flagsHongxu Jia1
- This script will list available pkgs which have PACKAGECONFIG flags. - If option '-f' is used, it will list available PACKAGECONFIG flags and all affected pkgs. - If option '-a' is used, it will list all pkgs and PACKAGECONFIG information - If option '-p' is used, it means list the pkgs with preferred version EXAMPLE: list-packageconfig-flags.py PACKAGE NAME PACKAGECONFIG FLAGS ============================================================== alsa-tools-1.0.26.1 defaultval gtk+ avahi-ui-0.6.31 defaultval python bluez4-4.101 alsa defaultval pie list-packageconfig-flags.py -f PACKAGECONFIG FLAG PACKAGE NAMES ==================================== 3g connman-1.16 avahi cups-1.6.3 pulseaudio-4.0 beecrypt rpm-5.4.9 rpm-native-5.4.9 list-packageconfig-flags.py -a ================================================== gtk+-2.24.18 /home/jiahongxu/yocto/poky/meta/recipes-gnome/gtk+/gtk+_2.24.18.bb PACKAGECONFIG x11 PACKAGECONFIG[x11] --with-x=yes --with-gdktarget=x11,--with-x=no,${X11DEPENDS} xf86-video-intel-2.21.9 /home/jiahongxu/yocto/poky/meta/recipes-graphics/xorg-driver/xf86-video-intel_2.21.9.bb PACKAGECONFIG None PACKAGECONFIG[xvmc] --enable-xvmc,--disable-xvmc,libxvmc PACKAGECONFIG[sna] --enable-sna,--disable-sna [YOCTO #4368] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05base.bbclass: Fix PACKAGECONFIG usage commentOtavio Salvador1
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05kernel.bbclass: fix typoJavier Viguera1
Signed-off-by: Javier Viguera <javier.viguera@digi.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05curl: upgrade to 7.31.0Cristiana Voicu1
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05liburcu: upgrade to 0.7.7Cristiana Voicu1
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05qt4: add upstream QTBUG-32534 patch for QHttpMultiPart upload corruptionJonathan Liu2
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05telepathy-glib: upgrade to v0.20.4Cristian Iorga2
pkgconfig.patch removed; already integrated in upstream. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05gstreamer1.0-plugins-ugly: upgrade to v1.0.9Cristian Iorga2
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05neon: upgrade to v0.30.0Cristian Iorga2
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05libpng: package new tools into a libpng-tools packageSaul Wold1
These tools are useful for fixing older or corrupted PNG files. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05texinfo: Fix path to perl for scriptsSaul Wold1
The 2 scripts texti2any and pod2tex referenced the /bin/perl directly, they shoule be using ${USRBINPATH}/env perl. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05oeqa/utils/qemurunner: fix wrong var in messageStefan Stanacar1
If nothing matches we should print the text not the match, else we get a nice traceback. Changed in V2: - commit message Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05btrfs-tools: upgrade to upstream revision.Yevhen Kyriukha3
Two patches were removed because changes that they provide are already exist. Signed-off-by: Yevhen Kyriukha <kirgene@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05mesa: update to 9.1.6Jonathan Liu3
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05packagegroup-core-boot: correct runtime dependencies for non-sysvinit systemSaul Wold1
hwclock, ifup-down and modutils are all sysvinit scripts that are available in systemd also. [YOCTO #4969] Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-05grub-efi-native: add flex patch to efi-native version alsoSaul Wold2
Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-02 17:06:59 +0000