summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2016-05-17linux-yocto/4.4: broxton enablement and refactoringBruce Ashfield3
Merging the following commits to refactor and add broxton support: 0d73a3bf6129 bsp/intel-corei7-64: Add intel-telemetry feature cee29e6234c7 features: add intel-telemetry feature 3a700d737b65 bsp/intel-common: Add broxton to supported SoCs in intel-core* BSPs f584a0c22a39 features: add broxton soc feature 7c2c2bd1a6aa baytrail;valleyisland: Use designware-usb3 feature instead of config 7216db4cc7a6 features/usb: Add usb-designware2 and 3 features ade182658359 cfg/sound.cfg: Add USB audio support 18ee21d9fba8 features/i915: Add CONFIG_KMS_FB_HELPER=y b3fa745962c2 features/soc/skylake: Refactor and comment config fragment (From OE-Core rev: f6d09d460d8ef4b6468abf5b7813c5eba92adab3) Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-05-17linux-yocto/4.4: skylake configurationBruce Ashfield3
Integrating the following patches for skylake features and config: 82c2ea9f6bf intel-common: enable support for skylake in intel common bsp 269b6a7a98e2 intel-common-drivers: enable OSS Support 71a19d3e6dc6 intel-pinctrl: enable pinctrl driver for skylake 281f7db8c839 features: soc: enable configurations for skylake. (From OE-Core rev: ab94ad02c35effad6fd3a1472737d1c73f53f7b3) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-05-17linux-yocto/4.4: BXT mmc fixes + PUNIT, tubropower, and telemetry backportBruce Ashfield3
Integrating the following mainline (or mainline destined) patches to support Intel Broxton: 076cc85486fd mmc: sdhci-acpi: Set MMC_CAP_AGGRESSIVE_PM for Broxton controllers 5d9c3aba78a1 mmc: sdhci-pci: Remove redundant runtime PM calls aa0cd9a58d54 mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off() f47597d00af0 mmc: sdhci: 64-bit DMA actually has 4-byte alignment a052a0703aed mmc: sdhci: Fix DMA descriptor with zero data length f9200dd4bfec mmc: sdio: Fix invalid vdd in voltage switch power cycle 7bbf49488269 mmc: sdhci: Do not BUG on invalid vdd 39fde8b630a6 tools/power turbostat: decode BXT TSC frequency via CPUID 2b4b633da512 tools/power turbostat: initial BXT support ee708ab5b74e intel_telemetry_debugfs: Fix unused warnings in telemetry debugfs 3053465d066b intel_telemetry_pltdrv: Change verbosity control bits 4c7732ec34bf platform:x86: Add Intel Telemetry Debugfs interfaces 401915397ddc platform:x86: Add Intel telemetry platform driver eaaee25ac936 platform/x86: Add Intel Telemetry Core Driver 44c969c62726 platform:x86 decouple telemetry driver from the optional IPC resources a6a2ecaf9980 platform:x86: Add Intel telemetry platform device e1f16b86eab0 intel_pmc_ipc: Avoid pending IPC1 command during legacy suspend ae91be46eb0d intel_pmc_ipc: Fix GCR register base address and length 3e15c1b19c81 intel_pmc_ipc: update acpi resource structure for Punit 5ec614cfd985 intel_punit_ipc: add NULL check for input parameters 4c3f01b178db platform:x86: add Intel P-Unit mailbox IPC driver 4826dbaac15f usb: dwc3: pci: add ID for one more Intel Broxton platform (From OE-Core rev: 802758b2ade24040d16ce4b692a07f97bef39331) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-05-17linux-yocto/4.1: make ltsi content availableBruce Ashfield3
In the better late than never category, this commit integrates the ltsi content into linux-yocto 4.1. We we already matching LTSI on the kernel version front with a small gap in patches. With this commit, we have a "ltsi" branch that is pure ltsi on the mailine kernel, and then that commit is merged into standard/base (to make it available to all BSPs). (From OE-Core rev: 7071ab47ce566398b398ac3d24eb3620a0353897) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-05-17linux-yocto/4.1: update to v4.1.22Bruce Ashfield3
Integrating the korg -stable releases. (From OE-Core rev: 417b1ef4d180b7434e69e5e8dff20298788f4007) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-05-17kernel-yocto: allow branch auditing to be suspendedBruce Ashfield2
When working on the yocto-bsp and kernel-lab update for yocto 1.2 we found it was impossible for a end-user BSP to isolate patches on a branch, since with the following commit: [kernel-yocto: enforce SRC_URI specified branch] Any new branch would be switched to whatever was specified on the SRC_URI and undoing the work that the yocto-bsp tool did to support board specific patches. To fix this, we'll keep the enforcing of branch consistency enabled by default, but introduce a variable "KMETA_AUDIT" that when not set will skip the check. There's no impact for existing users, and it is only something that other plumbing commands and tools will need to use (or care about). [YOCTO: #9120] (From OE-Core rev: 1d4c120edeb6e45665eafd6962a10ebb89d758eb) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-05-17kern-tools: handle directories with, or without, trailing /Bruce Ashfield1
Robert P. J. Day reported that configuration fragments and kernel features were not being found when organized in a particular manner: linux - $BOARD - mm.patch - mm.scc - ssd_sil.cfg - ssd_sil.patch - ssd_sil.scc - uio.cfg .. etc There was a bug in the tools that did not handle the mix of subdirs properly and ended up leaving a trailing / on the elements *not* in the $BOARD subdir. As a result, the configuration fragments were not properly found when searching the include paths, and a configuration failure was triggered (due to missing files). This change tweaks the tools to always check a path with and without a trailing / when processing config fragments so they can be later found when processing the configuration of the kernel. Reported-by: "Robert P. J. Day" <rpjday@crashcourse.ca> (From OE-Core rev: 92ba77bea59a33b0ddbd5db36e2a1b42e8fd7190) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-05-17linux-yocto/4.4: sched/cgroup: Fix/cleanup cgroup teardown/initBruce Ashfield3
backporting a mainline commit to address splats that have been seen on the 4.4 kernel: (From OE-Core rev: 52550828662cc430fe4c5273d44c4b818aa21150) Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-05-17linux-yocto/uvesafb: print error message when task timeout occursBruce Ashfield6
Integrating the following commit to have a more informative error message: uvesafb: print error message when task timeout occurs The driver waits for response from user space for a pending task until a timeout (UVESAFB_TIMEOUT) occurs. But the existing error message in later steps is a little obscure. This patch throws out an error message when timeout happens. Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com> (From OE-Core rev: 1c6ba3c57eae77adb9ae5c0a60e3a9174ef398b6) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-05-17gcc: Security fix CVE-2016-4490Armin Kuster2
Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-05-17gcc: Security fix CVE-2016-2226Armin Kuster2
Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-05-17gcc: Security fix CVE-2016-4489Armin Kuster2
Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-05-17gcc: Security fix CVE-2016-4488Armin Kuster2
Signed-off-by: Armin Kuster <akuster@mvista.com>
2016-05-17gcc: obey ldflags in the link of libgccChristopher Larson4
Explicitly obey it, the way it should, rather than only relying on --with-linker-hash-style. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
2016-04-29qemu: Security fix CVE-2016-2858Armin Kuster5
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-29qemu: Security fix CVE-2016-2857Armin Kuster2
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-29busybox: musl mips64 ip fixArmin Kuster2
Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-29busybox: Security fix CVE-2016-2147Armin Kuster3
busybox <= 1.24.2 Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-29busybox: Security Fix CVE-2016-2148Armin Kuster2
busybox <= 1.24.2 Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-29openssh: Security Fix CVE-2016-3115Armin Kuster2
opehssh <= 7.2 Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-29tiff: Security fixes CVE-2015-8665 and CVE-2015-8683Armin Kuster2
same fix for both CVE's tiff <= 4.0.6 Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-29rpm: explicitly disable tomcryptAndreas Oberritter1
Configure autodetects libtomcrypt, but then it adds libtommath to $LIBS and fails to link subsequent tests if it's unavailable. | checking for pcre.h... yes | checking for pcre_compile in -lpcre... no | checking whether to build with PCRE library... no | ++ executing failure action | configure: error: unable to find usable PCRE library Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-29recipetool.newappend: fix syntax error for 'not path_ok' errorChristopher Larson1
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-29matchbox-panel-2: Depend on dbus-glib-nativeJussi Kukkonen1
This is required for dbus-binding-tool. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-29connman-gnome: Depend on dbus-glib-nativeJussi Kukkonen1
This is required for dbus-binding-tool. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-29gobject-introspection: Depend on native flex and bisonJussi Kukkonen1
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-29gobject-introspection: fix floating dep on python-makoChristopher Larson1
This was resulting in non-deterministic builds where g-ir-doc-tool may or may not exist depending on whether python-mako was built previously. Add a PACKAGECONFIG so the dependency is explicit. Signed-off-by: Sujith H <sujith.h@gmail.com> Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Sujith Haridasan <Sujith_Haridasan@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-29sdk.py: preserve packaging data when SDKIMAGE_FEATURES has "package-management"Denys Dmytriyenko1
This is not enabled by default, as there are still limitations and possible issues with opkg (and rpm?) packaging data containing broken symlinks for local indexes: http://cgit.openembedded.org/openembedded-core/commit/?id=c8e0ec2da9ad4ce1c103966906a85f68c15400dd There are other use cases for the packaging data to be available in SDK, since it provides comprehensive info about SDK's contents and in the case of opkg and dpkg is all text-based and can be easily parsed by simple scripts. Introduce new "package-management" flag for SDKIMAGE_FEATURES list (similar to the one already used for IMAGE_FEATURES) that controls presence of the packaging data in resulting SDK, while unifying this behavior across the board for supported pkg managers - rpm, opkg, dpkg. Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-29lib/oe/rootfs: Fix DEBUGFS generation when using opkgRichard Purdie1
When enabling extra DEBUGFS image generation with opkg, errors are seen like: ERROR: core-image-minimal-1.0-r0 do_rootfs: Cannot get the installed packages list. Command '/media/build1/poky/build/tmp/sysroots/x86_64-linux/usr/bin/opkg -f /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/opkg.conf -o /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs --force_postinstall --prefer-arch-to-version status' returned 0 and stderr: Collected errors: * file_md5sum_alloc: Failed to open file /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/etc/syslog-startup.conf.busybox: No such file or directory. * file_md5sum_alloc: Failed to open file /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/etc/fstab: No such file or directory. basically for all CONFFILES in the image. This is due to the file rearranging the rootfs generation code does. If we preserve the /etc directory, the avoids the problem. We need to tell copyfile to preserve symlinks since some are present in /etc. [YOCTO #9490] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-29boost: improve configureRoss Burton1
Instead of adding a custom task (do_boostconfig) simply use the existing do_configure. Ensure that there are no relative paths in do_configure. Instead of editing the user-config.jam sample file in the source tree (which is entirely comments) and extending it on every build, create a new user-config.jam in ${WORKDIR}. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-29boost: delete the build directory before rebuildingRoss Burton1
If there is an existing build directory when do enter do_compile() then delete it, as it contains the previous build. If the rebuild was caused because dependencies have changed we want to ensure that a rebuild actually happens. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-22license.bbclass: make sure that image manifest dir existsMarkus Lehtonen1
Previously, write_deploy_manifest() was relying on write_package_manifest() to create the subdirectory for the manifest file. However, do_rootfs may be an empty function so that write_package_manifest() will not be called and the manifest subdirectory will not be created, causing a build failure. This patch fixes that by creating the directory hierarchy inside write_deploy_manifest(). [YOCTO #9446] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-22busybox: update flock behavior to match upstreamMaxin B. John2
In "util-linux" implementation of flock, -c 'PROG ARGS' means run "sh -c 'PROG ARGS'". At present, busybox implementation doesn't follow it. That causes errors like the one listed below: smart install /media/cronie-1.5.0-r0.core2_64.rpm Updating cache... <snip> Output from cronie-1.5.0-r0@core2_64: Running groupadd commands... NOTE: cronie: Performing groupadd with [ --system crontab] ERROR: cronie: groupadd command did not succeed. error: %pre(cronie-1.5.0-r0.core2_64) scriptlet failed, exit status 1 error: install: %pre scriptlet failed (2), skipping cronie-1.5.0-r0.core2_64 This is because we use flock command in preinstall scripts in packages which create new groups/users. [YOCTO #9496] Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-22valgrind: turn off the file level dependencyTudor Florea1
Attempting to install ptest for valgrind fails with this error: error: Can't install valgrind-ptest-3.11.0-r0.1@ppce500mc: no package provides /this/is/a/bogus/interpreter/name This is because one of the tests contains a bogus interpreter path on purpose It is not enough to skip the QA warning about the missing dependency but the dependency have to be completely removed. Since this package contains oly tests it is safe to disable per file dependencies and rely on the ones per package. Signed-off-by: Tudor Florea <tudor.florea@enea.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-22tzdata: update to 2016dArmin Kuster1
Changes affecting future time stamps America/Caracas switches from -0430 to -04 on 2016-05-01 at 02:30. (Thanks to Alexander Krivenyshev for the heads-up.) Asia/Magadan switches from +10 to +11 on 2016-04-24 at 02:00. (Thanks to Alexander Krivenyshev and Matt Johnson.) New zone Asia/Tomsk, split off from Asia/Novosibirsk. It covers Tomsk Oblast, Russia, which switches from +06 to +07 on 2016-05-29 at 02:00. (Thanks to Stepan Golosunov.) Changes affecting past time stamps New zone Europe/Kirov, split off from Europe/Volgograd. It covers Kirov Oblast, Russia, which switched from +04/+05 to +03/+04 on 1989-03-26 at 02:00, roughly a year after Europe/Volgograd made the same change. (Thanks to Stepan Golosunov.) Russia and nearby locations had daylight-saving transitions on 1992-03-29 at 02:00 and 1992-09-27 at 03:00, instead of on 1992-03-28 at 23:00 and 1992-09-26 at 23:00. (Thanks to Stepan Golosunov.) Many corrections to historical time in Kazakhstan from 1991 through 2005. (Thanks to Stepan Golosunov.) Replace Kazakhstan's invented time zone abbreviations with numeric abbreviations. Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-22tzcode: update to 2016dArmin Kuster1
they keep the versions in-sync. changes are all in data. Changes affecting future time stamps America/Caracas switches from -0430 to -04 on 2016-05-01 at 02:30. (Thanks to Alexander Krivenyshev for the heads-up.) Asia/Magadan switches from +10 to +11 on 2016-04-24 at 02:00. (Thanks to Alexander Krivenyshev and Matt Johnson.) New zone Asia/Tomsk, split off from Asia/Novosibirsk. It covers Tomsk Oblast, Russia, which switches from +06 to +07 on 2016-05-29 at 02:00. (Thanks to Stepan Golosunov.) Changes affecting past time stamps New zone Europe/Kirov, split off from Europe/Volgograd. It covers Kirov Oblast, Russia, which switched from +04/+05 to +03/+04 on 1989-03-26 at 02:00, roughly a year after Europe/Volgograd made the same change. (Thanks to Stepan Golosunov.) Russia and nearby locations had daylight-saving transitions on 1992-03-29 at 02:00 and 1992-09-27 at 03:00, instead of on 1992-03-28 at 23:00 and 1992-09-26 at 23:00. (Thanks to Stepan Golosunov.) Many corrections to historical time in Kazakhstan from 1991 through 2005. (Thanks to Stepan Golosunov.) Replace Kazakhstan's invented time zone abbreviations with numeric abbreviations. Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-22meta: add missing intltool-native dependencyRoss Burton5
Recipes that use intltool need to depend on intltool-native. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-22pulseaudio: Add intltool-native dependencyJussi Kukkonen1
Fixes configure failure "intltoolize: command not found". Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-19build-appliance-image: Update to krogoth head revision2016-4Richard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-19syslinux.bbclass: Remove APPEND from variable dependencyOtavio Salvador1
The value of APPEND is already being tracked and does impact on the generated configuration file. This reverts the OE-Core:3c2d7ae5 commit as it is not need anymore. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-19image.bbclass: The wrong name is being used for the debug filesystemMark Hatle1
[YOCTO #9487] The debug filesystem file name is ending in "debug_tar", it should be simply "tar". Strip the "debug_" piece as necessary. To avoid deleting the tar ball, when we've asked for just the tarball we need to check 't' and not 'realt'. The two hunks were suggested by RP. I've implemented and verify they work with the settings: PACKAGE_CLASSES = "package_rpm" IMAGE_GEN_DEBUGFS = '1' IMAGE_FSTYPES_DEBUGFS = "tar.bz2" IMAGE_FSTYPES_DEBUGFS = "tar.gz" and IMAGE_FSTYPES_DEBUGFS = "tar" Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-19image_types: Ensure rootfs dependencies cover DEBUGFSRichard Purdie1
If you configure a bz2 debugfs, pbzip2-native currently isn't built. This patch makes sure the dependencies are added. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-19syslinux.bbclass: The AUTO_SYSLINUXMENU value needs to be booleanOtavio Salvador1
The python code expects AUTO_SYSLINUXMENU to be a boolean value, otherwise the logic fails. This fixes the code comparing the value to "1" which is the value expected by the shell script code, counterpart. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-19perf: pass DESTDIR in EXTRA_OEMAKERoss Burton1
Instead of passing DESTDIR just in the make install invocation, pass it in EXTRA_OEMAKE. This appears to stop perf from rebuilding at instal time for me, which appears to be the trigger for the random build failure. [ YOCTO #9182 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-19buildtools-tarball: set INHIBIT_DEFAULT_DEPSRobert Yang1
The recipe doesn't need any default deps. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-19xf86-video-omapfb: remove EXTRA_OECONF_armv7aRobert Yang1
Fixe when build with armv7a: gcc -c ../../git/src/sw-exa.c -fPIC -DPIC -o .libs/sw-exa.o {standard input}: Assembler messages: {standard input}:179: Error: selected processor does not support `vld1.u8 {d0},[r1]!' in ARM mode {standard input}:182: Error: selected processor does not support `vld1.u8 {d1},[r4]!' in ARM mode {standard input}:183: Error: selected processor does not support `vld1.u8 {q1},[r0]!' in ARM mode {standard input}:184: Error: selected processor does not support `vzip.u8 d0,d1' in ARM mode {standard input}:185: Error: selected processor does not support `vld1.u8 {q2},[ip]!' in ARM mode {standard input}:186: Error: selected processor does not support `vst2.u8 {q0,q1},[fp]!' in ARM mode {standard input}:187: Error: selected FPU does not support instruction -- `vmov.u8 q1,q2' {standard input}:188: Error: selected processor does not support `vst2.u8 {q0,q1},[lr]!' in ARM mode {standard input}:239: Error: selected processor does not support `vld1.u8 {d0},[r1]!' in ARM mode {standard input}:242: Error: selected processor does not support `vld1.u8 {d1},[r4]!' in ARM mode {standard input}:243: Error: selected processor does not support `vld1.u8 {q1},[r0]!' in ARM mode {standard input}:244: Error: selected processor does not support `vzip.u8 d0,d1' in ARM mode {standard input}:245: Error: selected processor does not support `vld1.u8 {q2},[ip]!' in ARM mode {standard input}:246: Error: selected processor does not support `vst2.u8 {q0,q1},[fp]!' in ARM mode {standard input}:247: Error: selected FPU does not support instruction -- `vmov.u8 q1,q2' {standard input}:248: Error: selected processor does not support `vst2.u8 {q0,q1},[lr]!' in ARM mode make[2]: *** [image-format-conversions.lo] Error 1 make[2]: *** Waiting for unfinished jobs.... ../../git/src/omapfb-crtc.c: In function 'OMAPFBCrtcResize': ../../git/src/omapfb-crtc.c:34:12: warning: unused variable 'ofb' [-Wunused-variable] OMAPFBPtr ofb = OMAPFB(pScrn); ^ ../../git/src/omapfb-xv.c:66:43: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] { XvSettable | XvGettable, 0, 0xffff, "XV_COLORKEY" }, Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-19base.bbclass: Introduce PACKAGECONFIG_CONFARGS variableMartin Jansa2
* add separate variable for configuration options generated from PACKAGECONFIG setting, this helps other bbclasses and recipes to take advantage of PACKAGECONFIG mechanism, without including other options from EXTRA_OECONF * e.g. meta-qt5 recipes are abusing EXTRA_OECONF to get options from PACKAGECONFIG: EXTRA_QMAKEVARS_PRE += but with conf/distro/include/no-static-libs.inc it means getting --disable-static as invalid option inside EXTRA_QMAKEVARS_PRE as reported by Alexandre Belloni who tried to use poky with meta-qt5. * once we migrate all bbclasses and recipes to PACKAGECONFIG_CONFARGS we should also restrict EXTRA_OECONF append only to autotools.bbclass like I did for cmake.bbclass Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-19git: update to 2.7.4Alexander Kanavin2
This should also fix recent CVEs: https://ma.ttias.be/remote-code-execution-git-versions-client-server-2-7-1-cve-2016-2324-cve-2016-2315/ Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-19license.bbclass: do write_deploy_manifest in image postprocessingMarkus Lehtonen1
Call write_deploy_manifest() in image postprocessing phase, instead of rootfs postprocessing. The reason being that not necessarily all do_deploy tasks are dependencies of the do_rootfs and we might miss something. [YOCTO #9446] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-04-19devtool: sdk-update: fix handling of UNINATIVE_CHECKSUM changesPaul Eggleton1
If UNINATIVE_CHECKSUM changes over an SDK update, bitbake within the extensible SDK will be broken because it will see that the matching uninative tarball doesn't exist and if there is a default value of UNINATIVE_URL it will attempt to download the file and will then fail because the checksums don't match up; alternatively if no UNINATIVE_URL is set then it'll also fail with an error about misconfiguration. To fix this, add some logic to devtool sdk-update to download the matching uninative tarball(s) for the checksum(s) in the newly fetched SDK configuration. Fixes [YOCTO #9301]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-20 16:18:27 +0000