| Age | Commit message (Collapse) | Author | Files |
|---|
|
sstate_package creates hardlink from sysroot to SSTATE_BUILDDIR, and
sstate_create_package stores SSTATE_BUILDDIR into a archive file by
tar, these two task can be run simultaneously for different packages,
and make a hardlink for a file will lead to the change of the links
number of file, and if tar is reading this file, it will fail with exit
code 1, and report "file changed as we read it":
DEBUG: Executing shell function sstate_create_package
tar: x86_64-linux/usr/share/aclocal/xorg-macros.m4: file changed as we read it
4b3e353a5[sstate.bbclass: fix parallel building issue] tries to use the
tar parameter --ignore-failed-read to fix, but it does not work, and
tar parameter --warning=no-file-changed can close the warning, but can
not change the exit code. so close shell immediate exit, only fail
if tar returns not 1 and 0.
Exit codes of tar:
http://www.gnu.org/software/tar/manual/html_section/Synopsis.html
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With buildtools (which contains Python) installed on a build machine,
glib-2.0's gtester-report script was ending up with the full path to
the installed python binary in the shebang, which when rpm packaging
was used led to this being added as a per-file dependency by rpmdeps for
the libglib-2.0-utils package in which it ends up. This of course broke
do_rootfs when the package was included in the rootfs and had been
restored from sstate from another machine, as happened on the Yocto
Project autobuilder.
We were already trying to sed this script apparently only for the
shebang (since it appears that there are no other paths in the script)
so let's just sed the shebang properly; it also seems sensible to do
this for native as well instead of explicitly trying to exclude that
case.
Fixes [YOCTO #5205].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we split S and B for avahi in OE-Core commit
6112a07f4e9865f7ae0e5a953669c1adf789f9f0, files left over in the workdir
from a previous build seem to break re-execution of do_configure. Bump
PR to give a fresh workdir and avoid this problem.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The --enable-dependency-tracking option was added to workaround build
issues in libatomic. This fixes that build problem properly and removes
the flag since the dependency tracking code appears to be full of races
which are much deeper and harder to fix.
As per the automake manual, dependency tracking is only useful and worth
the build performance cost if you are doing more than one compile of the same
source code which in most cases we are not so this is a good thing anyway.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
| DEBUG: Executing python function sstate_task_postfunc| DEBUG: Staging files from /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/license-destdir to /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/deploy/licenses| NOTE: Using umask 002 (not 22) for sstate packaging| DEBUG: Preparing tree /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/license-destdir for packaging at /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/sstate-build-populate-lic/license-destdir| NOTE: Removing hardcoded paths from sstate package: 'find /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/sstate-build
-populate-lic/ \( -name "*.la" -o -name "*-config" -o -name "*_config" \) -type f | xargs grep -l -e '/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/sysroots/qemux86-64' | tee /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/sstate-build-populate-lic/fixmepath | xargs --no-run-if-empty sed -i -e 's:/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/sysroots/qemux86-64:FIXMESTAGINGDIRHOST:g''
| DEBUG: Executing shell function sstate_create_package
| gzip: /lib64/libz.so.1: version `ZLIB_1.2.5.1' not found (required by gzip)
| tar: Child returned status 1
| tar: Error is not recoverable: exiting now
| WARNING: /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/temp/run.sstate_create_package.20384:1 exit 2 from
| tar --ignore-failed-read -czf $TFILE license-destdir
| DEBUG: Python function sstate_task_postfunc finished
| ERROR: Function failed: sstate_create_package (log file is located at /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-minimal/1.0-r0/temp/log.do_populate_lic.20384)
NOTE: recipe core-image-minimal-1.0-r0: task do_populate_lic: Failed
Imagine:
pigz-native is used from sstate.
zlib-native is getting rebuilt.
pigz-native has some special handling to ensure its not used until the
system is ready. This is through a class and installing into a subdir of
PATH which only gets added in when we believe its available. We use
pigz-native in the image generation code and its in DEPENDS.
DEPENDS are guaranteed available for do_configure. do_populate_lic can
run before do_configure so the DEPENDS isn't met and I think this is our
corner case.I suspect ways of fixing this are to either:
a) force do_populate_lic after do_configure everywhere
b) statically link pigz-native
c) add in an explicit dependency to gzipnative.bbclass forcing
do_populate_lic after do_configure. If do_unpack handled a tar file in
an image, it would also be at risk of course.
Looking at each, a) is overkill and our dependency tree is nasty enough
already. b) sounds nice but is also risky since what happens if the gzip
binary is half copied when we run it. Our hardlink copying should deal
with that but I'm still nervous. This leaves us with c) so we could do:
do_unpack[depends] += "gzip-native:do_populate_sysroot"
The reproducer is:
bitbake pigz-native
bitbake zlib-native -c clean
bitbake core-image-minimal -c populate_lic --no-setscene -f
however your system needs to have an old version of zlib on it which
pigz-native can't run against. The line above fixes it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
btrfs-tools was failing occasionally due to version.h being missing. This
fixes the problems, thanks to several people on #yocto for helping out
why my lack of make knowledge of old fashioned suffix rules :)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The class now consolidate the handle of UBOOT_MACHINE and UBOOT_CONFIG
variables and handle possible mistakes done by user when using these
variables.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The U-Boot configuration has been consolidates into a single class to
avoid code duplication. This is now done by uboot-config class, so we
now use it.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The processing needs to happen per recipe and thus it ought to use
annonymous python function instead to be triggered at event.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
initscript sequence numbers are 00-99, so using 999 resulted in systemd warning
that it couldn't find "9oprofileui-server".
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
So that sysvinit images don't warn on every login only add it to common-session
if systemd is a DISTRO_FEATURE.
[ YOCTO #3805 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There's a standard way of announcing VNC services over mDNS that x11vnc
supports, so respect the feature and enable/disable it.
Also re-order the statements and drop the redundant PR.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The exported SDK only needs simulated root privileges for specific
tasks, such as the user-mode NFS server or rootfs extraction, and
oe-core does not support multilib builds in the generated SDK, so
it is neither necessary nor possible to build a 32-bit libpseudo.so
for a 64-bit SDK.
[YOCTO #5135]
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The following commit, 6ccd4d6, increased the RAM size for qemu machines
to 256MB due to some smart sanity tests failing on autobuilder because
more memory was needed.
Unfortunately this leads to various, potentially dangerous, issues like
the one observed during sudoku-savant project compilation:
collect: relinking
collect2: error: '_ZNK6sudoku5ClearINS_6SquareEEclERS1_' was assigned to
'board.rpo', but was not defined during recompilation, or vice versa
board.o:(.rodata+0x8): undefined reference to
`sudoku::Clear<sudoku::Square>::operator()(sudoku::Square&) const'
board.o:(.rodata+0x20): undefined reference to
`sudoku::Clear<sudoku::Sequence>::operator()(sudoku::Sequence&) const'
board.o:(.rodata+0x34): undefined reference to `typeinfo for
sudoku::Action<sudoku::Sequence>'
...AND THE LIST CONTINUES...
collect2: error: ld returned 1 exit status
make: *** [sudoku-savant] Error 1
After some tests, I found that the maximum amount of memory needed for
sudoku to compile properly is 146MB(!?!).
My attempts to create a simpler test case (using templates), in order to
replicate and isolate the issue failed. All the tests compiled just
fine.
So, my guess is that this problem is certainly memory related but the
cause might be hidden in any of the following: qemu versatile hw model,
in the kernel or, highly unlikely but not impossible, the toolchain
itself. The reason I don't really think the cause is in the toolchain is
the fact that the compilation completes just fine for 128MB on qemuarm but
also on other qemu machines (with 256MB of memory).
Since this issue might need lots of time to have a proper fix, I'll revert back
to using 128MB for qemuarm for the time being.
[YOCTO #5133]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This has now been superseded by testimage.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Update the sanity test for DISPLAY being set to handle the new testimage
class rather than the old imagetest-qemu class.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Setting TEST_IMAGE = "1" alone will now automatically run tests on the
image immediately after the image is built instead of having to add
INHERIT += "testimage" and run bitbake -c testimage <image> manually
(but that will still work). This restores functionality that was
present in the older imagetest-qemu class with IMAGETEST.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
[YOCTO #5212]
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove the test "Test against HP-UX 11.11 bug:
No converter from EUC-JP to UTF-8 is provided"
since we don't support HP-UX and if the euc-jp is not
installed on the host, libunistring will be built without
iconv support and will cause guild-native configure fail.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
pcimodules can not work due to no modules.pcimap file, and has been
replaced by "lspci -k", so we can remove it.
Update lib-build-fix.patch since remove pcimodules-pciutils.diff.
[YOCTO# 5210]
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- move everything in the same test. setUp/tearDown aren't quite
the right thing here, everything it's part of the same test. (and
it get's confusing when ssh fails)
ldd:
- change test name and add output to error message
vnc:
- remove unnecessary check as there is no point in doing
both ps and netstat. Also improve error output a bit.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It might be useful for debugging to have in the ssh log
the number of seconds a command has run.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
else we get :
arm-oe-linux-gnueabi-g++ -march=armv7-a -mthumb-interwork -mfloat-abi=softfp -mfpu=neon .../...
ibQtSystemInfoE.so.1 -o libQtSystemInfoE.so.1.2.0 .../... -lblkid -ludev -lX11 -lXrandr -lQtDBusE -lQtXmlE -lQtGuiE -lEGL -lQtNetworkE -lQtCoreE -lpthread
.../build/tmp-defaultsetup-eglibc-eglibc/sysroots/x86_64-linux/usr/libexec/armv7a-vfp-neon-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/4.8.1/ld: cannot find -lXrandr
make[2]: *** [../../lib/libQtSystemInfoE.so.1.2.0] Error 1
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The pkgdata stamps now need to be wiped away if the sysroot is destroyed.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The BASE_WORKDIR variable can be used instead of enforcing WORKDIR being
TMPDIR/work (and aborting the build if it isn't).
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To make it easier to move WORKDIR, define it using the new variable
BASE_WORKDIR, which is the root of the work directory.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* temporary work around for build issue on armv4t:
| cp/decl.o: In function `bad_specifiers':
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7171:(.text.unlikely+0x24): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7173:(.text.unlikely+0x32): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7176:(.text.unlikely+0x3e): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7180:(.text.unlikely+0x4c): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7182:(.text.unlikely+0x5a): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7185:(.text.unlikely+0x66): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7189:(.text.unlikely+0x74): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7191:(.text.unlikely+0x82): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7194:(.text.unlikely+0x8e): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7198:(.text.unlikely+0x9c): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7200:(.text.unlikely+0xaa): additional relocation overflows omitted from the output
| collect2: error: ld returned 1 exit status
| make[2]: *** [cc1plus] Error 1
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The variable ##COREBASE## has been deprecated, so use ##OEROOT## instead.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
perf's builtin-sched.c triggers extremly long build times on some
architectures due to gcc 4.7+ var-tracking functionality.
To fix this, we can cherry pick the 3.12 commit:
f36f83f94 [perf sched: Move struct perf_sched definition out of cmd_sched()]
With this change build times are reduced from 15 to 20 minutes for qemuarm to:
real 2m19.940s
user 1m35.438s
sys 0m11.165s
For kernel's that are not carrying this patch, the following can be added
to the perf recipe to also fix the issue:
+++ b/meta/recipes-kernel/perf/perf.bb
@@ -68,6 +68,7 @@ EXTRA_OEMAKE = \
CC="${CC}" \
AR="${AR}" \
perfexecdir=${libexecdir} \
+ EXTRA_CFLAGS="-fno-var-tracking" \
NO_GTK2=1 ${TUI_DEFINES} NO_DWARF=1 ${SCRIPTING_DEFINES} \
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating the 3.10 SRCREV to import the following MIPS configuration changes
4f689aa meta: remove ftrace/ftrace-disable feature
3058d81 mips: have the mips BSPs disable function tracing instead of ftrace
935f43f meta: add ftrace/ftrace-function-tracer-disable feature
0d72a03 mti-malta64: Default to support o32 and n32 userspace binaries
The first three changes improve the ftrace disabling fragments, to allow tracepoints
and ftrace to be enabled, while only disabling dynamic ftrace. This allows tools
that required tracepoints (like lttng) to be built against MIPS.
The mti-malta64 change adds n32 and o32 support to the default configuration to
support a broader range of userspace binaries.
[YOCTO #5215]
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bumping the meta branch SRCREV to import the following board support:
meta: add haswell-wc bsp for Intel Haswell Platform (Walnut Canyon CRB) scc and config files
Signed-off-by Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The LDFLAGS is required or some old kernels fails due missing
symbols and this is preferred than requiring patches to every old
supported kernel.
Fixes [YOCTO: #5221]
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the new QEMU_DONT_GRAB environment variable to disable grabs,
finally/hopefully solving the random hangs that the autobuilder has been hitting
for a while.
[ YOCTO #5131 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When the mouse pointer enters the qemu window it takes a pointer grab. This
doesn't sound too dangerous at first but it turns out that SDL will infinitely
busy-loop if it can't get the grab (e.g. if the screen is locked) and the
average autobuilder setup's X server will have locked the screen a few minutes
after boot.
The result is that on many autobuilders apparently random qemu instances (the
top-most one under the pointer) will hang during boot.
To resolve this add an option (via an environment variable) to never attempt a
grab. The default behaviour remains to grab so that everyone else doesn't see
any change.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The UBOOT_MACHINE variable needs to be set so the firmware utils can
know about some configuration settings which are board dependent. This
patch ensures the package is skipped in case UBOOT_MACHINE is unset
thus avoid its build in 'bitbake world' builds for incompatible
machines.
Fixes [YOCTO: #5223]
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The kernel build system does the right thing here and we should stop
overriding it. This code has been added based on a change from
'meta-metro' layer, revision 9d698004137c1a888d40d6a4808d94afa22387e7,
without any information about what problem it fixes so I am reverting
it.
Using the CFLAGS and LDFLAGS makes it impossible for kernel build
system to append to it, thus making the build fail in various ways as:
| CC /.../perf/1.0-r8/perf-1.0/perf.o
| In file included from builtin.h:4:0,
| from perf.c:9:
| util/util.h:74:24: fatal error: lk/debugfs.h: No such file or directory
| #include <lk/debugfs.h>
| ^
| compilation terminated.
The unset is done in do_compile and do_install otherwise it /rebuild/
perf as it detects the compiler options has change.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When building cmake for native, we don't use the system libraries and
thus cmake builds its own internal version of libarchive; this requires
zlib, bzip2, and e2fsprogs. We can add to DEPENDS for the two former
libraries and patch out the latter.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As there are two alternative mesa recipes (mesa and mesa-gl), there needs to be
a virtual provider that recipes that explicitly need Mesa (such as xserver-xorg)
can depend on.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch updates libtool.m4 (and its output) to resolve a problem
with variable 'lt_sysroot' not being properly updated if the option
'--with[-libtool]-sysroot' is not provided when running the 'configure'
script for a package.
According to the help text ouput from 'configure':
--with-libtool-sysroot=DIR Search for dependent libraries within DIR
(or the compiler's sysrooot if not specified).
Due to mixed up cases in a switch statement, when checking if the option
was specified or not, wrong actions were taken resulting in an incorrect
sysroot and failures to properly locate e.g. .la files when using the
populated SDK toolchain.
For current upstream status see:
http://lists.gnu.org/archive/html/bug-libtool/2013-09/msg00005.html
Signed-off-by: Hans Beckerus <hans.beckerus at gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is a "File name too long" error when len(TMPDIR) = 410, this is
because the function getLocalPath() converts the filepath into the
filename, so there would be the error when len(filename)
> NAME_MAX, truncate the filename to meet NAME_MAX will fix the problem.
[YOCTO #5201]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The latest upgrade changed u-boot-fw-utils to u-boot-fw-utils-cross, which
removed the on-target fw_printenv (and fw_setenv).
Re-create the updated version of the u-boot-fw-utils recipe.
U-Boot does try to strip the fw_printenv binary by default now. To avoid
this, without patching the Makefile, we add HOSTSTRIP=true to EXTRA_OEMAKE.
The new U-Boot do also require us to configure the build for a specific
machine, thus we change the package arch.§
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some machines have hardware-specific GL drivers that do EGL and GLES (many ARM
boards). Others have their own EGL/GLES drivers and provide a Mesa DRI driver
(EMGD). Previously adding Mesa, for software GL/GLX rendering in the first case
and hardware GLX in the second, involved bbappends and changing Mesa to be
machine-specific.
By adding a just-GL Mesa the machine definition can combine it with the hardware
drivers cleanly.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
