summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2012-09-20librsvg: make the libcroco dependency a PACKAGECONFIG optionRoss Burton1
Default to enabling it as we were build-depending on it already. If a user needs the disk space and the limitations imposed by not using libcroco are acceptable they can override this. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-20mkefidisk.sh: Add script to do an EFI install on the hostDarren Hart1
Sometimes it is convenient to prepare a bootable image from the host rather than using a live-image to install to a disk on the target. This script takes a live image as input, partitions a device, and performs the installation just as the installer would if run on the target. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-20rpm 5.4.9: DEPENDS on bison-nativeRobert Yang1
The rpm should depend on bison-native, otherwise errors when "bitbake rpm-native" in a fresh build: | make[4]: Entering directory `/path/to/rpm-native-5.4.9-r46/rpm-5.4.9/syck/lib' | bison -d -t -v -p syck -o gram.c gram.y | make[4]: bison: Command not found Basically, both the rpm-native and rpm should depend on bison-native, but don't need depend on bison, but it seems that it isn't necessary to add another depend line: DEPENDS_virtclass-native = "libpcre-native ... bison-native" So just add it to the DEPENDS. [YOCTO #3123] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-20gtk+: enable gtk+-nativeLaurentiu Palcu1
This is needed in order to run postinst scriplets at do_rootfs time rather than first boot time. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-20Replace "echo -e" with "printf" to have the same behavior in dash or bashAndrei Gherzan11
oe-core removed the prerequisite to have sh as bash. POSIX doesn't define any options and furthermore allows 'echo -e' to be the default behavior. This means that in dash 'echo -e' will actually print '-e' and interpret backslashes by default. We use instead 'printf' builtin command with or without '\n' to simulate 'echo -e' or 'echo -n'. 'printf' needs format while 'echo' can be used without any arguments. So 'echo >' was replaced by 'printf "" >'. 'echo' without '-n' flag adds a new line by default so to keep the same behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is used. [YOCTO #3138] Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-20byacc: update config.{sub, guess} before running configureMarcin Juszkiewicz2
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-20xcursor-transparent-theme: switch SRC_URI as matchbox-project is deadMarcin Juszkiewicz1
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-20bitbake.conf/gcc: Add clean masks for stamp filesRichard Purdie2
This takes advantage of new bitbake functionality to clean up stale stamp files when creating new stamp files. [YOCTO #2961] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-19image_types: fix squashfs-lzma image creationSaul Wold1
This removes the dependency on a seperate binary which we don't seem to have. So, use mksquashfs's -comp lzma to replace that functionality [YOCTO #3126] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-19rootfs_rpm: Add Multilib prefix to installed_packages listSaul Wold1
RPM does not name it's packages with the Multilib prefix, but the rootfs_rpm class keeps track of the Multilib prefixs in a list. Use that list to re-attach the prefix for use with the license bbclass, buildhistory bbclass will also use this and make it more accurate between multilib and non-multilib. Use the embedded "Platform" information to ensure we get all the correct matching. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-18eglibc: Do not use fsqrt in libm when building for fsl ppc with fpuKhem Raj2
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18eglibc: Fix fcntl.h for powerpcKhem Raj2
This fix is needed for systemd to work on powerpc Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18nfs-utils: add x32 patch to fix nfsctl issueSaul Wold2
nfsservctl syscall does not exist for x32, so return an error. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18xserver-xorg: Modify RREPLACES for RCONFLICTSSaul Wold2
fix bad runtime dependency that was causing -exa to be a suitable candidate for xserver-xorg, thus resulting in no X server in some situations Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18util-linux: Fix bloken swapoff symlinkAndrei Gherzan2
There were 2 issues with this symlink. 1. Is was installed in base_bindidir but packaged in bindir. Fixed to be packaged in base_bindir 2. The symlink swapoff was created to point to swapon. The problem is that swapoff is an alternative so it would end up pointing to swapoff.util-linux which was an inexistent file. The fix is to create a symlink swapoff.util-linux to swapon.util-linux. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18grub: disable lzma, device-mapper, zfs and nvpairConstantin Musca3
check-if-liblzma-is-disabled.patch: added - add support for the --enable_liblzma option [YOCTO #2750] Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18libtelepathy: PR bump to rebuild after libffi5 -> libffi6Martin Jansa1
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18recipes: few more PR bumps to rebuild after libffi5 -> libffi6Martin Jansa8
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18recipes: bump PR to rebuild after libffi5 -> libffi6Martin Jansa32
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14local.conf.sample: change valgrind support architecture commentJack Mitchell1
The comment for debug-tools states valgrind will only be installed for x86 targets. This is not true as valgrind now supports x86*, PPC* and ARMv7a; delete the comment as the architecture support is now so varied. Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-14patch.bbclass: increase securityConstantin Musca1
- Use mkdtemp for generating temp dir names - Use bb.utils.remove for removing temp dirs - Add comment for explaining the "patch" workaround [YOCTO #3070] Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-14linux-yocto/3.4: make uprobes select perf eventsBruce Ashfield2
uprobes depends on functionality provided by perf events. After uprobes was enabled in the standard kernel the mpc8315 board showed link errors due to missing perf event functions. This problem isn't isolated to the board or powerpc arch, but all other boards have PERF_EVENTS enabled. To fix this, we make UPROBE_EVENT select PERF_EVENTS, and any new boards will be protected from the same failure. We also update the configuration fragments since CONFIG_UPROBES depends on CONFIG_PERF_EVENTS being set, so PERF_EVENTS needs to be added whenever uprobes are enabled. [YOCTO #3111] Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14bitbake.conf: Assign SRCPV so that it will be tracked correcting in the ↵Richard Purdie1
sstate checksum Currently, SRCPV is just listed as having a value of ${@bb.fetch2.get_srcrev(d)} which isn't helpful. This can mean that if PV changes, two recipes can have the same sstate checksum despite having different PV values since the PV value itself isn't tracked anywhere. Adding this line means that the real PV value is expanded and recorded in the sstate checksum, meaning the sstate packages no longer overlap. This is critical in ensuring consistent builds for revipes using SRCPV. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-14opkg: Fix package dependency issue for preinstsRichard Purdie2
When processing dependencies, we need to look for both the SW_INSTALL and SW_UNKNOWN states. If we don't do this, dependencies can be missed and preinst scripts can run before dependencies are all installed. This leads to package installation errors for packages like dbus-1 and associated user permission errors. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14taglib: Update to v1.8Andrei Gherzan3
Patches not needed anymore - they switched to cmake. LGPL license was replaced with the actual LGPL 2.1 file. License section in audioproperties.h file was modified as it includes the new address of Free Software Foundation. libtag static library is not built by default anymore and if cmake is instructed to build static library than shared library is deactivated. So actually this is a switch now. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14binutils-2.22: Backport PR fixes from 2.22 branchKhem Raj15
These are fixes mainly cherrypicks for mips/ppc/x86 mainly fixing PRs in ld and gold Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14linux-yocto: virtio and KVM guest configurationBruce Ashfield2
Updating the meta branch SRCREV to pick up virtio and kvm guest configuration fragments. 79947f1 meta: add paravirtualized KVM guest config fragment 3ed86ed meta: add MMIO support in virtio config fragment Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14kernel-yocto: fix kernel configuration audit for custom yocto kernelsBruce Ashfield2
It was reported that the kernel configuration checks for custom yocto kernels had the following output: NOTE: validating kernel configuration grep: /meta-series: No such file or directory grep: /meta-series: No such file or directory WARNING: Can't find any BSP hardware or required configuration fragments. WARNING: Looked at //cfg///hdw_frags.txt and //cfg///required_frags.txt in directory: //cfg// NOTE: Tasks Summary: Attempted 375 tasks of which 367 didn't need to be rerun and all succeeded. which is not inspire confidence in the output of the process. Completely inhibiting the check is one option to remove the messages, but that removes the ability see output, which can help move users to a better or more fully configured linux-yocto based kernel. To fix this, we have to ensure that the path to the meta-series is always valid, and that the tools can deal with not all files existing in the audit directory. Since custom yocto kernels do not set KMETA (they don't have a meta branch), we ensure that a default of 'meta' is passed to the audit ('meta' is always valid), and that kconf_check itself can deal with an incomplete set of input audit files. The net result is output like this (using a defconfig with invalid options for the kernel being built): NOTE: validating kernel configuration This BSP sets 19 invalid/obsolete kernel options. These config options are not offered anywhere within this kernel. The full list can be found in your kernel src dir at: meta/cfg/standard/qemux86/invalid.cfg There were 1 instances of config fragment errors. The full list can be found in your kernel src dir at: meta/cfg/standard/qemux86/fragment_errors.txt The full list can be found in your kernel src dir at: meta/cfg/standard/qemux86/missing_required.cfg Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14pseudo_1.4.1.bb: update to pseudo 1.4.1, fixing 32-bit host problemsPeter Seebach3
There were a number of cases where pseudo used plain old stat() to get dev/inode data for files; on 32-bit hosts, this could fail if the files were over 2GB, causing pseudo to prevent removing of large files. This is fixed in 1.4.1. Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14scripts/combo-layer: ensure we validate branch/revision on initPaul Eggleton1
If both branch and last_revision are specified for a component when combo-layer init is run, ensure that the specified revision is actually on the specified branch and error out if not. Also ensure that the error message mentions the component. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14scripts/combo-layer: use last_revision if specified in initPaul Eggleton1
If last_revision is specified for a component when running combo-layer init, then use that revision instead of the latest revision on the branch. Also, remove unnecessary git checkout during init since we specify the revision to all calls to git when dealing with the component repositories. Fixes [YOCTO #3040]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14libffi upgrade to 3.0.11Andrei Dinu2
Changes : - Added ax_append_flags.m4 and ax_check_compile_flag.m4 to the m4 directory. The files were missing and aclocal.m4 was generated without those two macros. - Added a new license md5 checksum to the recipe because the old LICENSE file differs from the new one here : OLD : libffi - Copyright (c) 1996-2011 NEW : libffi - Copyright (c) 1996-2012 Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14gst-fluendo-mpegdemux: add LICENSE_FLAGSPaul Eggleton1
This likely requires some form of license to use in a commercial product. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14libx11: update patch to a backport from upstream gitRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14librsvg: remove spurious popt dependencyRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14librsvg: --disable-gnome-vfs doesn't exist anymore, removeRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14git: define NO_PYTHON=1 to stop git requiring python as a dependancyJack Mitchell1
Git requires python by default as an included script to link git to perforce is written in Python. Define NO_PYTHON to stop the script being included and thus remove the dependancy on Python. Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14image_types.bbclass: Round up ROOTFS_SIZE after base_size checkAndrei Gherzan1
If we round up ROOTFS_SIZE to IMAGE_ROOTFS_ALIGNMENT before checking if base_size is greater then IMAGE_ROOTFS_SIZE, we can end up adding an unaligned value to IMAGE_ROOTFS_SIZE. Obviously, if IMAGE_ROOTFS_EXTRA_SPACE was overwritten with an unaligned value. So let's add the round up code after the base_size calculus and it's comparison. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14kernelshark: add missing ${D}Saul Wold1
This was noticed by the following warnings of files that should have been removed! WARNING: QA Issue: kernelshark: Files/directories were installed but not shipped /usr/share /usr/share/trace-cmd /usr/share/trace-cmd/plugins /usr/share/trace-cmd/plugins/plugin_blk.so /usr/share/trace-cmd/plugins/plugin_sched_switch.so /usr/share/trace-cmd/plugins/plugin_kmem.so /usr/share/trace-cmd/plugins/plugin_kvm.so /usr/share/trace-cmd/plugins/plugin_function.so /usr/share/trace-cmd/plugins/plugin_jbd2.so /usr/share/trace-cmd/plugins/plugin_hrtimer.so /usr/share/trace-cmd/plugins/plugin_mac80211.so /usr/share/trace-cmd/plugins/.debug /usr/share/trace-cmd/plugins/.debug/plugin_blk.so /usr/share/trace-cmd/plugins/.debug/plugin_sched_switch.so /usr/share/trace-cmd/plugins/.debug/plugin_kmem.so /usr/share/trace-cmd/plugins/.debug/plugin_kvm.so /usr/share/trace-cmd/plugins/.debug/plugin_function.so /usr/share/trace-cmd/plugins/.debug/plugin_jbd2.so /usr/share/trace-cmd/plugins/.debug/plugin_hrtimer.so /usr/share/trace-cmd/plugins/.debug/plugin_mac80211.so Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14oprofileui: Add Icons to oprofileui-viewer packageSaul Wold1
Fixes the following warning: WARNING: QA Issue: oprofileui: Files/directories were installed but not shipped /usr/share/icons /usr/share/icons/hicolor /usr/share/icons/hicolor/16x16 /usr/share/icons/hicolor/32x32 /usr/share/icons/hicolor/48x48 /usr/share/icons/hicolor/24x24 /usr/share/icons/hicolor/scalable /usr/share/icons/hicolor/22x22 /usr/share/icons/hicolor/16x16/apps /usr/share/icons/hicolor/16x16/apps/oprofile-viewer.png /usr/share/icons/hicolor/32x32/apps /usr/share/icons/hicolor/32x32/apps/oprofile-viewer.png /usr/share/icons/hicolor/48x48/apps /usr/share/icons/hicolor/48x48/apps/oprofile-viewer.png /usr/share/icons/hicolor/24x24/apps /usr/share/icons/hicolor/24x24/apps/oprofile-viewer.png /usr/share/icons/hicolor/scalable/apps /usr/share/icons/hicolor/scalable/apps/oprofile-viewer.svg /usr/share/icons/hicolor/22x22/apps /usr/share/icons/hicolor/22x22/apps/oprofile-viewer.png Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14valgrind_3.7.0.bb: fix missing leading space on _appendMatthew McClintock1
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14patch.bbclass: Use one TMPDIR per patching processConstantin Musca1
We must use one TMPDIR per process (/tmp/${PID}) so that the patching processes don't generate the same temp file name (the "patch" program uses the TMPDIR environment variable for deciding where to create the temp files). [YOCTO #3070] Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14runqemu: Explicitly specify MACHINE when calling bitbakeKhem Raj1
When using runqemu with distros outside oe-core then MACHINE may not be there in local.conf so use the one thats available in environment of runqemu which is actually the correct one. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14uclibc: Revert systemd regressing patch from upsteam uclibc and uprev SRCREVKhem Raj2
This patch is causing systemd based systemd to not boot Revert of patch has been tested on tip of master hence the new SRCREV New SRCREV brings in one another regression fix as described here http://lists.uclibc.org/pipermail/uclibc/2012-August/046993.html Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-13connman: remove trailing whitespaceRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-12rt: Add hwlatdetect to rt imagesDarren Hart2
This adds the newly separated hwlatdetect package to the rt images. While this pulls in a python dependency, it is worth have hwlatdetect installed by default on these images as they are intended to assist in the evaluation of platforms for use in real-time environments. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-12rt-tests: Add hwlatdetect packageDarren Hart5
Split out rt-tests into rt-tests and hwlatdetect packages as the latter requires python and we want to be able to install the core rt-tests on minimal systems without python. This also addresses QA warnings about the hwlatdetect files not being packaged. Add an RRECOMMENDS on the hwlat kernel module package for the new hwlatdetect package as the python test requires the kernel module to function properly (but we probably don't want to kill a build if the exact kernel module package is not available). Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-12rt-tests: Update to 0.84, use the kernel.org git repositoryDarren Hart2
The maintainer of rt-tests has recreated the git repository on kernel.org and has stated that kernel.org is now the official source for rt-tests. Update to 0.84. Remove the user cflags and ldflags patch as it is included in the 0.84 release. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-12quota 4.00: add DEPENDS gettext-nativeJackie Huang1
do_install needs command 'msgfmt', it would fail if the command doesn't exist on the host, add DEPENDS gettext-native to fix this. [YOCTO #2811] Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-12gst-plugins-good: fix compile error with recent linux-libc-headersAndreas Müller2
With linux-libc-headers-3.5.0 (for tests) the error message was: | gstv4l2bufferpool.c: In function 'gst_v4l2_buffer_new': | gstv4l2bufferpool.c:184:3: error: 'struct v4l2_buffer' has no member named 'input' Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 02:53:13 +0000