summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2013-08-26lib/oeqa/runtime: rpm: add install and erase testsStefan Stanacar1
Copies to target rpm-doc file from deploy_dir and tries to install and then remove that package. rpm-doc was chosen because it's small, it only adds a few files to target, and it's almost always found in deploy_dir for images with package-management/rpm. Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26lib/oeqa/runtime: add vncserver for target testMihai Prica1
Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26lib/oeqa/runtime: add adjust date and time testMihai Prica1
Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26lib/oeqa/runtime: add new scp testAlexandru Palalau1
Copies a 5MB to target using scp, more of an network test than a scp one. Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26lib/oeqa/runtime: add new PAM support testAlexandru Palalau1
New test which verifies some usual commands functionality with PAM support Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26lib/oeqa/runtime: add new skeletoninit testAlexandru Palalau1
New test which verifies the usage of skeleton init script available with meta-skeleton layer Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26lib/oeqa/runtime: add new logrotate testAlexandru Palalau1
New logrotate test which verifies the log directory change in logrotate.conf. Needs an image with logrotate installed. Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26lib/oeqa/runtime: add a test for lddCornel Stoicescu1
This test checks that at least one path in RTLDLIST exists. Signed-off-by: Cornel Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26lib/oeqa/runtime: add test for perlCornel Stoicescu2
This test runs a perl script on the target and checks the output. Signed-off-by: Cornel Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26lib/oeqa/runtime: add basic test for x32 imagesAlexandru Georgescu1
Checks that an x86-64-x32 image has the right binaries. Signed-off-by: Alexandru Georgescu <alexandru.c.georgescu@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26connman-gnome: fix DHCP segfaultMihai Prica2
In networks that don't have a DHCP server configured, ipv4 address allocation fails and the ipv4 structure doesn't get populated. The patch checks this case also. [YOCTO #3945] Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu at intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26opkg: add missing initialization of conf->exclude_listJonathan Liu1
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26busybox: enable shared memory logging for systemdPaul Eggleton3
The default command-line options for launching busybox's syslogd are "-C" if using sysvinit; but because we use /etc/default/busybox-syslog when using systemd which the sysvinit initscript doesn't use, and no /etc/default/busybox-syslog is installed by default in OE-Core, the default arguments with systemd were no arguments at all with OE-Core alone. Effectively merge in the bbappend from meta-oe that adds a default file in order to set the default options to "-C" for systemd as well. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26ccache: update to upstream version 3.1.9Marko Lindqvist2
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26libpam: add PACKAGECONFIG data concerning auditJoe Slater1
We do not want libpam to build using audit just because it happens to be lying around, so we create PACKAGECONFIG[] data to give us explicit control. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26cronie: add PACKAGECONFIG dataJoe Slater1
We add PACKAGECONFIG[] data for audit and move the current pam related stuff into it's own entry. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26e2fsprogs: add populate-extfs.shRobert Yang2
This script is originally from Darren Hart, it will be used for creating the ext* filesystem from a given directory, which will replace the genext2fs in image_types.bbclass at the moment, we may use the mke2fs to replace this script again when it has the initial directory support. Changes of the script: * Rename it from mkdebugfs.sh to populate-extfs.sh * Add a simple usage * Add checking for the number of the parameters * Add the "regular empty file" and "fifo" file type * Set mode, uid and gid for the file * Save the command lines to a file and batch run them * Change the error message * Improve the performance * Add the support for hardlink [YOCTO #3848] Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26e2fsprogs: properly set up extent header in do_writeRobert Yang2
do_write doesn't fully set up the first extent header on a new inode, so if we write a 0-length file, and don't write any data to the new file, we end up creating something that looks corrupt to kernelspace: EXT4-fs error (device loop0): ext4_ext_check_inode:464: inode #12: comm ls: bad header/extent: invalid magic - magic 0, entries 0, max 0(0), depth 0(0) Do something similar to ext4_ext_tree_init() here, and fill out the first extent header upon creation to avoid this. [YOCTO #3848] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26e2fsprogs: only update the icache for ext2_inodeRobert Yang2
We only read the cache when: bufsize == sizeof(struct ext2_inode) then we should only update the cache in the same condition, otherwise there would be errors, for example: cache[0]: cached ino 14 when bufsize = 128 by ext2fs_write_inode_full() cache[1]: cached ino 14 when bufsize = 156 by ext2fs_read_inode_full() Then update the cache: cache[0]: cached ino 15 when bufsize = 156 by ext2fs_read_inode_full() Then the ino 14 would hit the cache[1] when bufsize = 128 (but it was cached by bufsize = 156), so there would be errors. [YOCTO #3848] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26e2fsprogs: let debugfs do sparse copyRobert Yang2
Let debugfs do sparse copy when src is a sparse file, just like "cp --sparse=auto" This patch has been reviewed by the linux-ext4 mailing list, but isn't merged atm. [YOCTO #3848] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26e2fsprogs: the max length of debugfs argument is too shortRobert Yang2
The max length of debugfs argument is 256 which is too short, the arguments are two paths, the PATH_MAX is 4096 according to /usr/include/linux/limits.h, so use BUFSIZ (which is 8192 on Linux systems), that's also what the ss library uses. This patch has been reviewed by the linux-ext4 mailing list, but isn't merged atm. [YOCTO #3848] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26oe.types: add 'path' typeChristopher Larson1
- path normalization ('normalize' flag, defaults to enabled) - existence verification for paths we know should exist ('mustexist' flag) - supports clean handling of relative paths ('relativeto' flag) Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26stat: fix the wrong return codeZhangle Yang2
After stat -h is executed, the return code is 1. This patch changes it to 0. Signed-off-by: Zhangle Yang <zhangle.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26gtk-engines: fix build with automake-1.13Marko Lindqvist2
Add patch substitute-tests.patch that works around automake TESTS limitation. See http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13771. Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26pulseaudio: Fix up configure options and use gtk+3Saul Wold1
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26alsa-lib: fix function definitions error for mipsKai Kang2
Functions atomic_add(s) and atomic_sub(s) are defined with 'extern __inline__' that may cause compile fails when cross compile for mips. The error message looks like: | pcm/.libs/libpcm.a(pcm_meter.o): In function `snd_pcm_meter_update_scope': | .../alsa-lib-1.0.27.2/src/pcm/pcm_meter.c:139: undefined reference to `atomic_sub' Replace the 'extern __inline__' with 'static __inline__' to fix this issue. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26connman: upgrade to 1.17Cristian Iorga1
connman 1.17 is mainly a bugfix release, as such, recommended to upgrade to. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26harfbuzz: upgrade to v0.9.19Mihai Prica2
Remove the disable_graphite.patch because the --without-graphite2 configure option can be used instead. Split package into harfbuzz and harfbuzz-icu. The ICU support is now built into a separate library that will be shipped in a different package. Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26gpgme: update to 1.4.3Paul Eggleton2
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26runqemu-ifup: when tunctl can't be found, say what package builds itRoss Burton1
If runqemu is used without actually building any qemu images (i.e. you downloaded the images) it's likely that qemu-helper-native hasn't been built. Instead of just saying what command can't be found, tell the user how to solve their problem. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26openssl: avoid NULL pointer dereference in three placesXufeng Zhang3
There are three potential NULL pointer dereference in EVP_DigestInit_ex(), dh_pub_encode() and dsa_pub_encode() functions. Fix them by adding proper null pointer check. [YOCTO #4600] [ CQID: WIND00373257 ] Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26openssh: add init.d/sshd status command for LSB complianceJackie Huang1
Signed-off-by: Li Wang <li.wang@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26at: add init.d/atd status command for LSB complianceJackie Huang1
Signed-off-by: Li Wang <li.wang@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26sysvinit: add init.d/bootlogd status command for LSB complianceJackie Huang1
Signed-off-by: Li Wang <li.wang@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26dbus: add init.d/dbus-1 status command for LSB complianceJackie Huang1
Signed-off-by: Li Wang <li.wang@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26nfs-utils: add init.d/nfsserver status command for LSB complianceJackie Huang1
Signed-off-by: Li Wang <li.wang@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26sysklogd: add init.d/syslog status command for LSB complianceJackie Huang1
Signed-off-by: Li Wang <li.wang@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26glib-2.0: Specify libiconv when building on uclibcKhem Raj1
We use GNU libiconv seprate package on uclibc specifying this makes the configure clear of not trying to detect glibc/iconv and then also finding libiconv in sysroot and confusing itself with errors like | gconvert.c:66:2: error: #error GNU libiconv not in use but included iconv.h is from libiconv | #error GNU libiconv not in use but included iconv.h is from libiconv | ^ Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26nativesdk-ca-certificates: prepopulate ca-certificates.crtChristopher Larson1
As postinsts aren't run for nativesdk packages when populating an SDK, we need to prepopulate up-front. Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26ca-certificates: add recipe (version 20130610)Christopher Larson5
We need this for certain nativesdk recipes, as we can't rely on the certificate path or bundle path being the same across distros, and it's useful in many cases on the target as well. This is based on the 20130119 recipe from meta-oe, with the following changes: - use the debian git repository to avoid vanishing sources - obey our target paths - default to a sysroot relative to the script location (make relocatable) - define SUMMARY - don't inherit autotools, this isn't an autotools package - add MPL-2.0 to LICENSE, as that's the license of the certdata - install the script man page - use a native rather than cross recipe, as it's not bound in any way to the target system - add nativesdk to bbclassextend, for use in SDKs Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26xserver-nodm-init: improvements from meta-oePaul Eggleton3
Bring in some changes from the meta-oe version of this script in order to bring them closer together. (Unfortunately it does not completely supersede the recipes in meta-oe - there is still some unification to be done between x11-common and xserver-common.) * Add systemd support (with extensions for ROOTLESS_X) * Remove sudo from RDEPENDS_${PN} since this hasn't been used by this for a long time * Rearrange recipe slightly to make the order logical A couple of additional improvements at the same time: * Use ROOT_HOME for root's home directory * Set short description in SUMMARY instead of DESCRIPTION Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26classes: Remove references to _remove in function names since this may ↵Richard Purdie6
become a bitbake keyword There is a good chance we might want to support a bitbake operator "_remove" which works in a similar way to _append and _prepend. As such, we can't use those keywords in function or variable names. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26linux-yocto: introduce v3.10Bruce Ashfield3
Introduce the 3.10 kernel. This is based on the 3.10.9 upstream kernel and replaces the 3.8 recipes, which will be removed once all reference boards have been updated. 3.10 also the latest LTSI and will be updated with that content when it becomes available. Other features of the 3.10 kernel include: - refreshed -rt support - refreshed yaffs2, aufs3 - cryptodev - bfs, edf, and OCF staged features - scrubbed and updated meta data for v3.10 - improved tools support for meta data updates and queue maintenance - patch carry forward from all previous linux-yocto kernels and configuration. This kernel has been built and boot tested on all qemu machines and architectures. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-26gst-plugins-good: fix 3.10 libc-headers build failureBruce Ashfield2
kernel commit 24b9f5017 [[media] V4L: Remove deprecated image centering controls] removed the definitions of V4L2_CID_HCENTER and V4L2_CID_VCENTER after three years of depreciation. The ioctl values are still free, and the case statement which processess them in v4l2 userspace falls through to the proper replacement. So in the short term, we can explicitly define them using the old absolute values, and everything will work. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-26linux-libc-headers: Reinstate ↵Richard Purdie2
scripts-Makefile.headersinst-install-headers-from-sc.patch The autobuilders and their long paths are still triggering errors during the headers installation. Reinstate the previous patch for this, after updating for 3.10. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-26linux-libc-headers: ptrace.h: remove ptrace_peeksiginfo_argsBruce Ashfield2
The addition of ptrace_peeksiginfo_args to the uapi in kernel commit 84c751bd [ptrace: add ability to retrieve signals without removing from a queue (v4)] means that existing applications using glibc versions that define ptrace_peeksiginfo_args in sys/ptrace.h will get duplicate structure definitions like: | In file included from /poky-master/build/tmp/work/i586-poky-linux/strace/4.8-r0/strace-4.8/process.c:66:0: | /poky-master/build/tmp/sysroots/qemux86/usr/include/linux/ptrace.h:58:8: error: redefinition of 'struct ptrace_peeksiginfo_args' | struct ptrace_peeksiginfo_args { | ^ | In file included from /poky-master/build/tmp/work/i586-poky-linux/strace/4.8-r0/strace-4.8/defs.h:159:0, | from /poky-master/build/tmp/work/i586-poky-linux/strace/4.8-r0/strace-4.8/process.c:37: | /poky-master/build/tmp/sysroots/qemux86/usr/include/sys/ptrace.h:191:8: note: originally defined here | struct ptrace_peeksiginfo_args | ^ | make[2]: *** [process.o] Error 1 Reverting to the previous status of not exporting this structure temporarily fixes applications, until they can be adjusted to not mix sys/ptrace.h and linux/ptrace.h includes. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-08-26linux-libc-headers: update to v3.10Bruce Ashfield3
Now that the 3.10 kernel has been released we can bump the libc-headers to that version and remove the 3.8 variant. Userspace compatibility is maintained through kernel versions, we also make the single 3.10 version the toolchain default. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-26guilt: update to latest git versionBruce Ashfield14
Uprev guilt to the latest guilt version from its upstream repository. As part of the uprev all of the previous changes required for the yocto kernel tools to use git to manipulate series files have been dropped. These changes were specific to circumventing parts of guilt's internal santiy checking to allow specific Yocto kernel manipluation of sub-series files. Since the kernel tools no longer need guilt, we can use an up to date and nearly pure upstream version of guilt. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-26kern-tools: usability, bug fixes and no guiltBruce Ashfield2
Updating the kern-tools SRCREV to pick up the following fixes: 60a894e kgit-s2q: add proper commit ID handling for mixed am/apply usage 3b08257 kgit-s2q: delete pruning of path support. c5868b4 kgit-s2q: Restore implicit exit status to "git apply" section 1bd00b9 kgit-scc: mask warnings from cleanup phase 5 bb75299 kgit-s2q: fix commit warp when running "git am --abort" ef9571b kgit-scc: cleanup git rebase-apply dir fdb7d21 kgit-scc: ensure treegen stops if a meta series fails 008987b config: add kconfig cleaning options 69ff569 kgit-s2q: strip blank lines and comments e7b4540 kgit-init: disable garbage collection on a new tree 417eaed kgit-s2q: delete old LTSI patch dir finding code 21f2200 kgit-scc: better error checking on resume ad5084c kern-tools: use .meta as meta data container 1deb5d8 kgit-meta: don't push patches without a series file eb431a1 kgit-s2q: aid patch reject resolution via helper scripts f859c40 kgit-s2q: only use patch annotations when explicitly asked 333ae18 kgit: speed patch application by batching patches bf6991d kgit: teach tools about non-default meta dirs bcfc712 kgit-s2q: usability improvements cb28803 kgit-s2q: fix patch prefix stripping. 37f40e1 kgit-s2q: warn/exit with error if patch not in series f4704d2 kgit-s2q: consistent rm usage e11819c kgit-s2q: standardize on use of git mailinfo 36a5eda kgit: remove guilt dependency c461a4f spp/scc: export mark commands to meta-series 5311162 updateme: ensure that generated features are only used once 4f7a263 kgit-checkpoint: clear .gitignore for meta branch 21ee6f2 updateme: enforce a matching machine b08749d kgit-scc: remove -meta files after consruction These are bug fixes, usability changes as well as the removal of the guilt dependency. During the uprev of the guilt package, the amount of circumvention of the typical guilt workflow and checks meant that using it as a series -> branch manager was no longer appropriate. As a result a new tools kgit-s2q (series 2 queue) was created based on git-quiltimport, git am, and the LTSI tree generation scripts. The result is better series to branch validation, faster application and a simpler management model. This tool is backwards compatible with any tree previously constructed with guilt. We are now "guilt free" Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-26Add memory resident bitbake scriptRichard Purdie1
This adds an init script which instead of the standard bitbake, launches a memory resident bitbake, defaulting to port 12345. It expects a port number to use as the first option. Right now this is experimental but I think its probably worth wrapping up in a form people can more easily experiment with it. There are some known issues: a) It throws some debug output due to the lack of a UI which we need to clean up b) It should probably be able to auto select a free port c) You get a nice backtrace if you specify a build directory but not a port number I'd also highlight there are security issues here if you don't trust users who can connect into localhost. We might need to look at named pipes or something similar for something limited to the current user. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 10:35:53 +0000