summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2012-09-21SDK: relocate symlinks tooLaurentiu Palcu2
The directory usr/libexec/ in the SDK sysroot contains the default symlinks to the toolchain binaries and these, too, need to point to the correct toolchain path. [YOCTO #3090] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-21SDK: remove references to Poky distro from tarball installerLaurentiu Palcu1
The installer should be generic. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-21adt-installer: ensure directory exists before copying/removingLaurentiu Palcu1
If the installation is done in a directory which already contains a valid installation, opkg will not install anything and the moving the contents of /install/dir/opt/poky/1.2 (for example) to /install/dir will throw some errors. However, the install directory will not be affected. This patch will ensure that the /install/dir/opt/poky/1.2 exists. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-21SDK: fix installation into symlinked directoriesLaurentiu Palcu3
The SDK installation scripts should not canonicalize symlinked directories because the entire relocation would be done to the directory to which the symlink points. Instead, if the installation is a symlink, use that path to relocate the binaries. For example, if we have the following symlink: /opt/sdk -> ~/my/test/sdk the binaries will be relocated to /opt/sdk not ~/my/test/sdk as it is done now. [YOCTO #3102] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-21adt-installer: fix package installation issueLaurentiu Palcu1
When the cross canadian toolchains are installed, for different architectures, they might contain common files. This leads to installation failures since the opkg, by default, does not overwrite files. This issue happens, for example, for binutils packages (that contain the same locale files) or gdb (which installs some syscalls xml files). The locale files could be removed from the binutils cross-canadian package but we cannot do the same for the syscalls GDB files which are used by GDB to display user friendly names for the syscall numbers. Hence, the best solution is to force opkg to overwrite these files. [YOCTO #3109] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-21intltool: include intltool.m4 and add missing rdependsConstantin Musca2
- include /usr/share/aclocal/intltool.m4 into the intltool package (the files from intltool-dev must be included into the main package, as intltool is a development tool) - add missing rdepends: gettext-dev, libxml-parser-perl [YOCTO #2597] Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-21opkg svn: respect to the arch priorityRobert Yang2
This is for fixing the problem: 1) bitbake core-image-sato-sdk with MACHINE=qemux86 2) bitbake core-image-sato with with MACHINE=crownbay The qemux86's PACKAGE_ARCH is i586, the crownbay's is core2, but several i586 packages will be installed into crownbay's rootfs though there are core2 packages. For example, there are: xserver-xorg*_1.11.2-r7_i586.ipk xserver-xorg*_1.9.3-r1_core2.ipk The crownbay.conf says: PREFERRED_VERSION_xserver-xorg ?= "1.9.3" What the crownbay's image needs is xserver-xorg*_1.9.3-r1_core2.ipk, but the xserver-xorg*_1.11.2-r7_i586.ipk will be installed, this is incorrect. This is caused by opkg's selecting mechanism: when more than one candidate is found, it will use the higher version one and ignore the arch priority. we have several conf files which set the PREFERRED_VERSION_pkg = "..." , but there is no such a mechanism which can let us tell the opkg to install the preferred version. When the preferred version is higher, this is OK, but if the preferred version is lower, there would be problems: 1) Most of the packages are core2 in the image, but several of them are i586, though we have built the core2 ones, this seems strange. 2) What's worse is that the image may not work since the preferred version pkg is not installed. We have set the arch priority clearly in the opkg.conf, I think that respect to the arch priority is reasonable during the image generation. Add the "--select-higher-version" option to let the user have another choice, the default is no. [YOCTO #2575] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-21gdb: Upgrade 7.4 -> 7.5Khem Raj8
This is a simple upgrade. Dropping the unneeded patches and adding --disable-werror to configure since thats is what one of the patch was doing which was dropped. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-21opkg-nogpg: drop SRCREVMartin Jansa1
* use SRCREV from opkg_svn.bb, because with 596 patches we have won't apply Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-21opkg: add patch to fix SIGSEGV when printing status fileMartin Jansa2
* it was triggered by c02364f36e228835ea5d7fd4e1d347fd451f8544 when new package had 2 entries in Provides and old version just 1 Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-21opkg: replace local patches with git patches submitted upstreamMartin Jansa8
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-20opkg 0.1.8: remove it since it doesn't workRobert Yang3
Remove opkg_0.1.8.bb and the related files since it doesn't work: - It doesn't support the "--force_postinstall" option which is used by package_ipk.bbclass. - It still doesn't work after remove the "--force_postinstall" option, it can't install the packages in complementary_pkgs.txt. [YOCTO #3136] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-20qemux86-64: Support for KVM, paravirt and virtio addedCristian Iorga2
KVM, paravirtualization and virtio drivers are now activated in runqemu using the kvm option flag for qemux86-64. Host CPU features are also exported to guest OS (Yocto Linux). Usage example: runqemu qemux86-64 core-image-x11 kvm Implements [YOCTO #2550]. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-20qemux86: Support for KVM, paravirt and virtio addedCristian Iorga3
KVM, paravirtualization and virtio drivers are now activated in runqemu using the kvm option flag for qemux86. Host CPU features are also exported to guest OS (Yocto Linux). Usage example: runqemu qemux86 core-image-x11 kvm Implements [YOCTO #2550]. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-20runqemu: show bitbake errors to userScott Garman1
In certain edge cases, bitbake may fail to run and cause setup_tmpdir() within runqemu to fail, and not give the user a helpful error message. Catch this case and show the user the output of bitbake -e. This fixes [YOCTO #3112] Signed-off-by: Scott Garman <scott.a.garman@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-20librsvg: make the libcroco dependency a PACKAGECONFIG optionRoss Burton1
Default to enabling it as we were build-depending on it already. If a user needs the disk space and the limitations imposed by not using libcroco are acceptable they can override this. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-20mkefidisk.sh: Add script to do an EFI install on the hostDarren Hart1
Sometimes it is convenient to prepare a bootable image from the host rather than using a live-image to install to a disk on the target. This script takes a live image as input, partitions a device, and performs the installation just as the installer would if run on the target. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-20rpm 5.4.9: DEPENDS on bison-nativeRobert Yang1
The rpm should depend on bison-native, otherwise errors when "bitbake rpm-native" in a fresh build: | make[4]: Entering directory `/path/to/rpm-native-5.4.9-r46/rpm-5.4.9/syck/lib' | bison -d -t -v -p syck -o gram.c gram.y | make[4]: bison: Command not found Basically, both the rpm-native and rpm should depend on bison-native, but don't need depend on bison, but it seems that it isn't necessary to add another depend line: DEPENDS_virtclass-native = "libpcre-native ... bison-native" So just add it to the DEPENDS. [YOCTO #3123] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-20gtk+: enable gtk+-nativeLaurentiu Palcu1
This is needed in order to run postinst scriplets at do_rootfs time rather than first boot time. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-20Replace "echo -e" with "printf" to have the same behavior in dash or bashAndrei Gherzan11
oe-core removed the prerequisite to have sh as bash. POSIX doesn't define any options and furthermore allows 'echo -e' to be the default behavior. This means that in dash 'echo -e' will actually print '-e' and interpret backslashes by default. We use instead 'printf' builtin command with or without '\n' to simulate 'echo -e' or 'echo -n'. 'printf' needs format while 'echo' can be used without any arguments. So 'echo >' was replaced by 'printf "" >'. 'echo' without '-n' flag adds a new line by default so to keep the same behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is used. [YOCTO #3138] Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-20byacc: update config.{sub, guess} before running configureMarcin Juszkiewicz2
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-20xcursor-transparent-theme: switch SRC_URI as matchbox-project is deadMarcin Juszkiewicz1
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-20bitbake.conf/gcc: Add clean masks for stamp filesRichard Purdie2
This takes advantage of new bitbake functionality to clean up stale stamp files when creating new stamp files. [YOCTO #2961] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-19image_types: fix squashfs-lzma image creationSaul Wold1
This removes the dependency on a seperate binary which we don't seem to have. So, use mksquashfs's -comp lzma to replace that functionality [YOCTO #3126] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-19rootfs_rpm: Add Multilib prefix to installed_packages listSaul Wold1
RPM does not name it's packages with the Multilib prefix, but the rootfs_rpm class keeps track of the Multilib prefixs in a list. Use that list to re-attach the prefix for use with the license bbclass, buildhistory bbclass will also use this and make it more accurate between multilib and non-multilib. Use the embedded "Platform" information to ensure we get all the correct matching. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-18eglibc: Do not use fsqrt in libm when building for fsl ppc with fpuKhem Raj2
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18eglibc: Fix fcntl.h for powerpcKhem Raj2
This fix is needed for systemd to work on powerpc Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18nfs-utils: add x32 patch to fix nfsctl issueSaul Wold2
nfsservctl syscall does not exist for x32, so return an error. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18xserver-xorg: Modify RREPLACES for RCONFLICTSSaul Wold2
fix bad runtime dependency that was causing -exa to be a suitable candidate for xserver-xorg, thus resulting in no X server in some situations Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18util-linux: Fix bloken swapoff symlinkAndrei Gherzan2
There were 2 issues with this symlink. 1. Is was installed in base_bindidir but packaged in bindir. Fixed to be packaged in base_bindir 2. The symlink swapoff was created to point to swapon. The problem is that swapoff is an alternative so it would end up pointing to swapoff.util-linux which was an inexistent file. The fix is to create a symlink swapoff.util-linux to swapon.util-linux. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18grub: disable lzma, device-mapper, zfs and nvpairConstantin Musca3
check-if-liblzma-is-disabled.patch: added - add support for the --enable_liblzma option [YOCTO #2750] Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18libtelepathy: PR bump to rebuild after libffi5 -> libffi6Martin Jansa1
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18recipes: few more PR bumps to rebuild after libffi5 -> libffi6Martin Jansa8
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-18recipes: bump PR to rebuild after libffi5 -> libffi6Martin Jansa32
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14local.conf.sample: change valgrind support architecture commentJack Mitchell1
The comment for debug-tools states valgrind will only be installed for x86 targets. This is not true as valgrind now supports x86*, PPC* and ARMv7a; delete the comment as the architecture support is now so varied. Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-14patch.bbclass: increase securityConstantin Musca1
- Use mkdtemp for generating temp dir names - Use bb.utils.remove for removing temp dirs - Add comment for explaining the "patch" workaround [YOCTO #3070] Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-14linux-yocto/3.4: make uprobes select perf eventsBruce Ashfield2
uprobes depends on functionality provided by perf events. After uprobes was enabled in the standard kernel the mpc8315 board showed link errors due to missing perf event functions. This problem isn't isolated to the board or powerpc arch, but all other boards have PERF_EVENTS enabled. To fix this, we make UPROBE_EVENT select PERF_EVENTS, and any new boards will be protected from the same failure. We also update the configuration fragments since CONFIG_UPROBES depends on CONFIG_PERF_EVENTS being set, so PERF_EVENTS needs to be added whenever uprobes are enabled. [YOCTO #3111] Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14bitbake.conf: Assign SRCPV so that it will be tracked correcting in the ↵Richard Purdie1
sstate checksum Currently, SRCPV is just listed as having a value of ${@bb.fetch2.get_srcrev(d)} which isn't helpful. This can mean that if PV changes, two recipes can have the same sstate checksum despite having different PV values since the PV value itself isn't tracked anywhere. Adding this line means that the real PV value is expanded and recorded in the sstate checksum, meaning the sstate packages no longer overlap. This is critical in ensuring consistent builds for revipes using SRCPV. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-14opkg: Fix package dependency issue for preinstsRichard Purdie2
When processing dependencies, we need to look for both the SW_INSTALL and SW_UNKNOWN states. If we don't do this, dependencies can be missed and preinst scripts can run before dependencies are all installed. This leads to package installation errors for packages like dbus-1 and associated user permission errors. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14taglib: Update to v1.8Andrei Gherzan3
Patches not needed anymore - they switched to cmake. LGPL license was replaced with the actual LGPL 2.1 file. License section in audioproperties.h file was modified as it includes the new address of Free Software Foundation. libtag static library is not built by default anymore and if cmake is instructed to build static library than shared library is deactivated. So actually this is a switch now. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14binutils-2.22: Backport PR fixes from 2.22 branchKhem Raj15
These are fixes mainly cherrypicks for mips/ppc/x86 mainly fixing PRs in ld and gold Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14linux-yocto: virtio and KVM guest configurationBruce Ashfield2
Updating the meta branch SRCREV to pick up virtio and kvm guest configuration fragments. 79947f1 meta: add paravirtualized KVM guest config fragment 3ed86ed meta: add MMIO support in virtio config fragment Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14kernel-yocto: fix kernel configuration audit for custom yocto kernelsBruce Ashfield2
It was reported that the kernel configuration checks for custom yocto kernels had the following output: NOTE: validating kernel configuration grep: /meta-series: No such file or directory grep: /meta-series: No such file or directory WARNING: Can't find any BSP hardware or required configuration fragments. WARNING: Looked at //cfg///hdw_frags.txt and //cfg///required_frags.txt in directory: //cfg// NOTE: Tasks Summary: Attempted 375 tasks of which 367 didn't need to be rerun and all succeeded. which is not inspire confidence in the output of the process. Completely inhibiting the check is one option to remove the messages, but that removes the ability see output, which can help move users to a better or more fully configured linux-yocto based kernel. To fix this, we have to ensure that the path to the meta-series is always valid, and that the tools can deal with not all files existing in the audit directory. Since custom yocto kernels do not set KMETA (they don't have a meta branch), we ensure that a default of 'meta' is passed to the audit ('meta' is always valid), and that kconf_check itself can deal with an incomplete set of input audit files. The net result is output like this (using a defconfig with invalid options for the kernel being built): NOTE: validating kernel configuration This BSP sets 19 invalid/obsolete kernel options. These config options are not offered anywhere within this kernel. The full list can be found in your kernel src dir at: meta/cfg/standard/qemux86/invalid.cfg There were 1 instances of config fragment errors. The full list can be found in your kernel src dir at: meta/cfg/standard/qemux86/fragment_errors.txt The full list can be found in your kernel src dir at: meta/cfg/standard/qemux86/missing_required.cfg Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14pseudo_1.4.1.bb: update to pseudo 1.4.1, fixing 32-bit host problemsPeter Seebach3
There were a number of cases where pseudo used plain old stat() to get dev/inode data for files; on 32-bit hosts, this could fail if the files were over 2GB, causing pseudo to prevent removing of large files. This is fixed in 1.4.1. Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14scripts/combo-layer: ensure we validate branch/revision on initPaul Eggleton1
If both branch and last_revision are specified for a component when combo-layer init is run, ensure that the specified revision is actually on the specified branch and error out if not. Also ensure that the error message mentions the component. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14scripts/combo-layer: use last_revision if specified in initPaul Eggleton1
If last_revision is specified for a component when running combo-layer init, then use that revision instead of the latest revision on the branch. Also, remove unnecessary git checkout during init since we specify the revision to all calls to git when dealing with the component repositories. Fixes [YOCTO #3040]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14libffi upgrade to 3.0.11Andrei Dinu2
Changes : - Added ax_append_flags.m4 and ax_check_compile_flag.m4 to the m4 directory. The files were missing and aclocal.m4 was generated without those two macros. - Added a new license md5 checksum to the recipe because the old LICENSE file differs from the new one here : OLD : libffi - Copyright (c) 1996-2011 NEW : libffi - Copyright (c) 1996-2012 Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14gst-fluendo-mpegdemux: add LICENSE_FLAGSPaul Eggleton1
This likely requires some form of license to use in a commercial product. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14libx11: update patch to a backport from upstream gitRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14librsvg: remove spurious popt dependencyRoss Burton1
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 00:07:45 +0000