summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2010-11-10imagetest-qemu: Add test case for dmesg check in targetJiajun Xu14
Add a test case for error log check with command dmesg in target. The case introduces a new folder in target, "/opt/test", which holds test scripts running in target. Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
2010-11-10poky.conf: Change default locale to POSIXSaul Wold1
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
2010-11-10task-sdk-gmae: fix typo in SDK-EXTRAS and convert to ?= for assignmentSaul Wold2
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
2010-11-10python: Fix hardcoded python references which should refer to PN, removing ↵Richard Purdie1
duplicate providers warning Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-09busybox: import upstream patch for make 3.82Joshua Lock2
Signed-off-by: Joshua Lock <josh@linux.intel.com>
2010-11-09eglibc: fix build of eglibc-initial for make 3.82Joshua Lock2
Make 3.82, as shipped with Fedora 14, fixes some holes in the parser which in turn breaks behaviour of some Makefiles. Most notably eglibc's. Signed-off-by: Joshua Lock <josh@linux.intel.com>
2010-11-07package.bbclass: make sure 'sysroots' created before lockfileKevin Tian1
package sstate requires a lock under sysroots/, which however may not be created when sstate_setscene functions are executed and then causes failures. here we make sure 'sysroots' created before do_package_setscene is executed. Signed-off-by: Kevin Tian <kevin.tian@intel.com>
2010-11-07poky.conf: add PWD to BB_HASHBASE_WHITELISTKevin Tian1
Without doing this I can't reuse prebuilts generated from one directory in another build directory which is really not comfortable for developers. Due to difference on PWD variable, base hash becomes different for every sstate package. So here PWD is added to the hase base whitelist, which makes most prebuilts reusable now in a different build directory. However there still remains one issue about do_populate_sysroot sstate package. Absolute path is encoded in this task which then blocks reuse on them. Perhaps we need some redesign for do_populate_sysroot into two stages, with all absolute path related operations moved to the 2nd stage. This way then the 1st stage can be reused. Partially fix [BUGID #522] Signed-off-by Kevin Tian <kevin.tian@intel.com>
2010-11-07bitbake.runqueue.py: Fix no exec task handling to correct counter housekeepingRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-06meta/classes: Mark do_package_write and do_build as noexec tasksRichard Purdie2
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-06bitbake: Add support for 'noexec' tasksRichard Purdie2
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-06bitbake/siggen: Allow siggen code to control final stampfile formatRichard Purdie2
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-06.gitignore: Update after documentation layout changesRichard Purdie1
2010-11-04docmentation/poky-ref-manual: Remove unused Indexes titleRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-04Performed general edits to this chapter.Scott Rifenbark1
many english corrections performed. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04Poky Reference Manual: Completed editing pass of Chapter 3.Scott Rifenbark1
I completed the editing pass of this chapter by doing sections 3.3.3 on. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04Created a new folder to hold the BSP GuideScott Rifenbark6
I created a new sub folder to hold the BSP Guide by itself so there are three folders now for each of the Yocto manuals: BSP Guide, quick start and poky ref manual. The new folder for the BSP guide is 'bsp-guide'. It contains the bsp.xml file, its own Makefile, a bsp-guide.xml file, and its own 'Figures' directory. The 'bsp-guide.xml' file that was in the poky reference folder was deleted. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04General edits to the using poky and Extending Poky chapters.Scott Rifenbark2
I completed general edits to the second chapter of the poky reference manual. These edits went from section 2.4.5 through the end of the chapter. They consist of text rewrites for more active voice and follow general technical writing principles. I completed the same types of edits in the third chapter of the manual from the beginning through section 3.3.2. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04General text edits through section 2.4.4 "General Bitbak Problems"Scott Rifenbark1
Extensive language and consistency edits being applied to the manual. During the 0.9 push I did not have time to make a pass through the document. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04Changed a source command to have the correct source.Scott Rifenbark1
Changed "source poky-4.0/poky-init-build-env poky-4.0-build" to be "source poky-laverne-4.0/poky-init-build-env poky-4.0-build" Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04Changed the title and wording of the section about pre-built binaries.Scott Rifenbark1
There was a grammatical error in the title and redundancy in the first sentence of this section. Cleaned up the title and wording. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04Editing pass through the Introduction chapter.Scott Rifenbark1
I did a complete edit pass through this chapter. The manual has not been fully edited from its original state. One critical technical correction was corrected where the green-3.3 release was referenced. I changed this to laverne 4.0. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-04Figure changed for building an image and yoctolinux removedScott Rifenbark2
I changed the figure that goes along with building an image based on Kevin's input. Also, removed several URLs that had 'yoctolinux' in them along with a 'tar' command example with the same string. LF does not want these in there. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-11-03cross-canadian bbclass: replace hardcoded -pokysdk with SDK_VENDORKoen Kooi1
Signed-off-by: Koen Kooi <k-kooi@ti.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-03openssl: Use STAGING_BINDIR_NATIVE as the path to perl, not bindir which can ↵Richard Purdie1
point to incorrect places Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02sstate: Provide a temporary mechanism to stop collisions between toolchain ↵Richard Purdie1
components in builds from scratch using sstate Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02bitbake/siggen: Provide better warnings about empty tasksRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02external-python-tarball: Include SDKMACHINE in tarball nameRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02external-python-tarball: Add ability to generate an externally usable ↵Richard Purdie1
standalone python tarball Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02openssl/db/gdbm: Extend to provide BBCLASSEXTEND nativesdkRichard Purdie3
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02python: Remove hardcoded python references and replace with PN, allowing use ↵Richard Purdie2
of BBCLASSEXTEND=nativesdk Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02base/utils.bbclass: Sync up overlapping functionsRichard Purdie2
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02utils.bbclass: Add functions from OE.devRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02gnome.bbclass: Remove autotools_stage referenceRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02gnome.bbclass: Use BPN instead of PN and set SRC_URI name similar to OE.devRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02meta-emenlow: Rename packages to recipes in line with main repositoryRichard Purdie60
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02base-files: Allow a basic issue file to be extended by the code, following ↵Richard Purdie3
the method now used by OE Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-02base-files: Allow issue and hostname generation to be overriddenRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-01src_distribute: Set EXPORT_FUNCTIONS correctlyRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-11-01bitbake/siggen: Fix finalise call argumentsRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27Poky -> Yocto name changeRichard Purdie2
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27documentation: Update copyright to the Linux FoundationRichard Purdie2
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27documentation/yocto-qs: Fix references to a poky-qemu package and replace ↵Richard Purdie1
with the yocto toolchain tarball Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27Removed text from section 5.1.2.1.1.Scott Rifenbark1
Removed several blocks of text from section 5.1.2.1.1 "Installing and Setting up the Eclipse IDE". This text according to Jessica was no longer needed.
2010-10-27Corrected the package command for Debian-based hosts.Scott Rifenbark1
Corrected a typo listing the package libsdl1.2-dev as libsdll.2-dev. Also added the package mercurial. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Added package installation requirements.Scott Rifenbark1
Added commands to support package installation of RPM-based host systems to the example. Input based on feedback from Dirk. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Re-inserted Poky Image as part of the front matter.Scott Rifenbark1
I have inserted the Poky image in the front matter again because the book is a Poky Guide. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27documentation/poky-ref-manual: Fix image makefile to reference the imageRichard Purdie1
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-10-27Moved the Poky image file to the "Figures" folder.Scott Rifenbark1
The image file was in the same directory as the main reference manual files. So I moved the file into subdirectory "Figures" with other figures. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
2010-10-27Re-installed the Poky Handbook image at the top of the manualScott Rifenbark1
I could not get the Yocto Project logo to appear correctly in the book after the title. I also decided that since Poky is by no means going away that this book should have that image associated with it as it is the Poky Reference Manual. Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 13:19:05 +0000