Age | Commit message (Collapse) | Author | Files |
|
Pass GDK_PIXBUF_FATAL_LOADER to the sstate postinst and intercept so that any
problems are flagged as errors instead of being silently ignored.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
So that gdk-pixbuf-query-loader failures can be identified as such (and executed
later, or run on the target) add a magic environment variable return loader
failures from main().
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
libpam might miss ABI specific dependencies for pam-plugins-*, for RPM uses
generic names to check the packages depending on it and doesn't consider the
arch, which will lead to packaging issues in mulbilib build.
pam_plugin_hook is added because the plugin packages are dynamically
generated, so we need to manually process multilib names by add baselib to
RPROVIDES/RDEPENDS as ABI specific tag.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
I worked with Ming Liu on this particular issue. You may wonder why
this is necessary let me attempt to explain the underlying causes.
In deb/ipk on a multilib package, the package name has specific multilib
references in it. I.e. the alternative libraries start with something
like lib32-... This was done primarily because deb/ipk do not allow two
packages with the same name (but different architectures) to be
installed at the same time. So the name has to be unique.
In RPM however, the names of the packages and matches with the
architectures and if they are not the same we can do these multilib
installs. This matches the behavior of other RPM based distributions
and in many ways the tools people are used to working with RPM. For the
most part this works fine in multilib configurations because additional
per-file dependencies are added that capture the shared library
dependencies with ABI specific information. This unfortunately fails in
a few cases where plugins are dynamically loaded via dlopen -- such as
libpam.
One possible fix is simply to follow the deb/ipk package naming, but
this causes a design advantage of rpm. When a package has a dependency
on 'bash', we really don't care what bash is installed, only that -a-
bash is installed. In the deb/ipk case, the lib32- packages would end
up with a lib32-bash dependency and you could potentially end up with
two 'bash' packages being installed.
So the fix I recommended for the issue was to add the baselib path to
the internal dependencies. Since we know that the libpam installed in
'lib' needs the modules that were compiled to also work with the 'lib'
version of libpam. While the libpam in 'lib64' need the modules to work
with the 'lib64' version of the plugins.
Existing dependencies are preserved so there is no impact in the ipk/deb
case, the RPM case is resolved as the additional dependency information
is now present for the package manager to select the package we really
want.
If anyone else has a suggestion for an alternative fix, we're interested
-- but this is the best answer we could come up with. (If any of the
above should be added to the commit message, the YP bug, or
documentation, please let me know and I'll make sure it gets added.)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
[YOCTO #4532]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We only build wayland-native for the scanner, so disable the bits we
don't actually need. This avoid build issue on older distro such as
Centos 5.x:
| error: 'O_CLOEXEC' undeclared (first use in this function)
| error: sys/timerfd.h: No such file or directory
| error: 'CLOCK_MONOTONIC' undeclared (first use in this function)
| error: 'TFD_CLOEXEC' undeclared (first use in this function)
| error: 'SFD_CLOEXEC' undeclared (first use in this function)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
O_CLOEXEC is introduced from Linux 2.6.23, so old kernel doesn't have
it, we need check before use.
This patch is much more like a workaround, since it may need fcntl() use
FD_CLOEXEC to replace.
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a formatting fix, '=back' is required before
'=head1' on Ubuntu 12.04.
Signed-off-by: Baogen Shang <baogen.shang@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The machine can not work with memory over 256M, so add a checking
at startup. If the memory size exceed 256M, just stop emulation then
throw out warning about memory limitation.
Signed-off-by: Jiang Lu <lu.jiang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The qemu mips malta base board boot loader uses environment strings
with a max length of 256 bytes which is not long enough to accommodate
a long NFS path in addition to the normal kernel boot command line
arguments.
The solution is to expand the environment string length to 1024 bytes.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
core-image-lsb only gave a warning:
"WARNING: Building libpam but 'pam' isn't in DISTRO_FEATURES,
PAM won't work correctly"
when the proper DISTRO was not set for it.
default choice would be DISTRO = "poky-lsb",
but not necessarily, depending on each custom distro.
This fix will enforce the proper usage of pam
as a distro feature for core-image-lsb by giving
an error instead of just a warning.
Fixes [YOCTO #6073]
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I'm sick of seeing people adding to EXPORT_FUNCTIONS in these classes
when they clearly have no idea what it does.
Worse, these uses of it are all broken, the naming is incorrect and
they do nothing. Lets remove them and try and preserve any remaining
part of my sanity.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Seems wrong that qemux86 has this enabled and qemux86-64 doesn't.
Also this will allow people to use kvm with -cpu=host.
Right now, runqemu qemux86-64 kvm uses -cpu=kvm64 because without this
feature you can't use cpu=host on newer host kernels (>= 3.8).
This basically reverts poky e6149ec6c4c14d3a939022cdc29ac94dced836dd /
oe-core 64749308fadabb4aa7c39f360c6395827bc5eb3a
The reason of that commit (which is more than a year old) was that on
the AB running old kernels (2.6.37) we would see occasional shutdown failures.
(but if memory serves me right the fix might have been just a coincidence).
I've tested this change with by:
- run tests on runqemu qemux86-64 (without kvm) (300 seconds)
- run tests on runqemu qemux86-64 kvm (which uses by default cpu=kvm64) - (tests
took 20 seconds)
- run tests on runqemu qemux86-64 kvm with cpu=host - (tests took 18 seconds)
[ YOCTO #5956 ]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Integer underflow in the xTrapezoidValid macro in render/picture.h in X.Org
allows context-dependent attackers to cause a denial of service (crash) via
a negative bottom value.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2013-6424
Signed-off-by: Baogen Shang <baogen.shang@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This function disables the reverse DNS lookup on QEMU targets to reduce the
delay when using static IP address. By disabling DNS lookup we can save a great
deal of time during automated testing on the autobuilder (on the order of ~400
seconds per ssh tranaction). This is seen when using the testimage, there is a
delay getting logged-in from the server to target.
It's enabled for all qemu imgaes by default and can be overridden by setting
the SSH_DISABLE_DNS_LOOKUP variable.
[YOCTO #5954]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Duplicate parameters in the tune args are repeated in the
MULTILIB_OPTIONS variable. This leads to incorrect configurations
if the order of the parameters is bad.
(Eg. "mhard-float m32/mhard-float m64" leads to an incorrect config)
This patch finds the common parameters and removes the duplicates.
Signed-off-by: Alexandru-Cezar Sardan <alexandru.sardan@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
3.14 is now the reference for libc-headers. After building and booting 3.x based
BSPs against the 3.14 headers, we can safely remove the old version and patches
that are now part of the mainline kernel.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Introduce the 3.14 linux-libc-headers recipe, now that the 3.14 kernel is
available, and the default for the qemu reference BSPs.
The three patches which were required for the previous 3.10 libc-headers
are not required for 3.14 and can be ignored.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As of the 3.13 kernel bz2 compressed tarballs are not available. To support
older header tarballs, and newer ones that require the 'xz' compressed
bundles, we can break out a variable that allows versioned libc headers to
select the archive format that works.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The release kernel for Yocto 1.6 is the 3.14 kernel, so we introduce
the versioned recipes here.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit c581059df88d5801cc20ab24a096e4a67b737d49.
The same thing was already applied at a slightly different place in the file.
|
|
The purpose of this module is to deploy a test image on a EFI-enabled hardware
and run our runtime tests. A bit of background:
- testimage.bbclass uses the concept of TEST_TARGET which is a class name
that is responsible for target deploying. A layer can provide
it's own TEST_TARGET. Right now has OE-core has a QemuTarget and a SimpleRemoteTarget
(ssh into an already up and running machine and run tests), the default one being qemu.
- basically testimage does something like:
target.deploy()
try:
target.start()
runTests()
finally:
target.stop()
This module assumes a running EFI machine with gummiboot as bootloader and
core-image-testmaster installed (or similar). Also your hardware under test has
to be in a DHCP-enabled network that gives it the same IP for each reboot.
One time setup (master image):
- build core-image-testmaster with EFI_PROVIDER = "gummiboot"
- install the image on the target
Test image setup:
- build your test image, e.g core-image-sato as you usually do, but with these in local.conf:
IMAGE_FSTYPES += "tar.gz"
- Now run the tests:
INHERIT += "testimage"
TEST_TARGET = "GummibootTarget"
TEST_TARGET_IP = "192.168.2.3"
bitbake core-image-sato -c testimage
Other notes:
- TEST_POWERCONTROL_CMD (togheter with TEST_POWERCONTROL_EXTRA_ARGS) can be a command that runs on the host and does power cycling.
The test code passes one argument to that command: off, on or cycle (off then on). In my case I use something like
TEST_POWERCONTROL_CMD="powercontrol.exp test 10.11.12.1 nuc1" in local.conf.
Basically my expect script does: 'ssh test@10.11.12.1 "pyctl nuc1 <arg>" and runs a python script there that controls power for a label called nuc1'.
The reason why my expect script has to ssh into another machine is because of network topology, and that machine is the one actually connected
to the test rack and the power strip. That's why TEST_POWERCONTROL_CMD and _ARGS need to be customized for one's setup, the only requirement being
that it accepts: on/off/cycle as the last argument.
- if no command is defined it would use classic reboot. This is fine as long as the machine
actually reboots (as in the ssh test hasn't failed), but it's useful for "simple-setup-with-one-board-on-the-desk" scenario, where
some manual interaction is okay from time to time.
[YOCTO #5614]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a custom recipe with custom initramfs and installers, that makes
it easy to deploy a master image for testing purposes.
We need a master image running on the target hardware, that should be a
known good build, with a set of utilities installed so that we use it
to deploy the images under test.
This core-image-testmaster recipe isn't a requirement per se, any image can
be used as long as the required conditions are met.
The test code assumes:
- that the device has a second rootfs labeled as testrootfs
- it has a properly configured bootloader entry (called test) for the second kernel and rootfs
- the master image has a /etc/masterimage file so it can differentiate between master
and test images
- the master image has tar, mount, bash (basically the normal linux utilities not the busybox
ones)
[YOCTO #5614]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These are meant to be used by a master image, for a simple
initial setup.
The install scripts are similar to the default ones, but:
- custom partitioning, replaces the swap partiton with a second root filesystem
- adds labels to the partitions
- preconfigures a boot loader entry for the second rootfs
Part of [YOCTO #5614]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We do not DEPEND on libbsd, so we do not want to
build with it just because libutil.h is found by configure.
As noted in the patch, specifying --disable-libutil to
configure does not work, so we provide "cached" configure
variables.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you try to set SDKMACHINE in a distro configuration file, it won't
take effect because by the time that is parsed the line in bitbake.conf
which includes the appropriate conf file for SDKMACHINE has already been
parsed. Check that SDK_ARCH has changed from its default value and show
an error if it hasn't in order to catch this misconfiguration.
Fixes [YOCTO #5861].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When install command sets the created directory mode, pseudo will change
the mode of the directory to 0700 incorrectly. Backport patch to fix it.
Signed-off-by: yanjun.zhu <yanjun.zhu@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop --disable-ffmpegcomponents which is deprecated since libomxil-bellagio-0.9.1
Explicitly disable doc generation to prevent using doxygen from build machine.
Components are external and are available separately here:
http://sourceforge.net/projects/omxil/files/components/
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replaced DEPLOY_DIR_IMAGE with DEPLOY_DIR
[YOCTO #6051]
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a patch to update the missed sstate event with
info about the sstate files locations that were found.
It's needed as to display the found file in the toaster ui.
Also fixes a bug where a setscene task may have appeared in the
missed list even if it was found in a sstate mirror.
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
piglit and mesa-demos are not buildable in x11-less distros so we must
to add those only when opengl and x11 DISTRO_FEATURES are available.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The v3.10.24 merge created a merge conflict, which was not properly
resolved. Fixing the merge conflict and fixing the build of qemu arm.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There was a nasty sstate hash corruption issue occurring where the
fact the testimage bbclass was inherited meant that the checksum
changed due to testimage.bbclass being confused with image.bbclass.
This patch anchors the bbclass names to avoid this confusion.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The mke2fs and e2fsck commands are regular tools of e2fsprogs, so they
should be installed.
Signed-off-by: Yue Tao <Yue.Tao@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
| Note: adding Smart RPM DB channel
|
| Note: to be installed: run-postinsts@x86_64 kernel-modules@qemux86_64 packagegroup-core-boot@qemux86_64 lttng-ust@x86_64
| Loading cache...
| Updating cache... ######################################## [100%]
|
| Computing transaction...error: Can't install lttng-ust-2:2.3.0-r0.0@x86_64: no package provides /usr/bin/python
|
| Saving cache...
|
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_rootfs (log file is located at tmp/work/qemux86_64-wrs-linux/wrlinux-image-glibc-small/1.0-r1/temp/do_rootfs/log.do_rootfs.13619)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add --with-libnl autoconfig parameter and dependency
between libpcap and libnl1.
Disable libnl1 by default to avoid libpcap build error
when libnl1 is involved.
Signed-off-by: Hu Yadi <Yadi.hu@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add additional parameter 'SYSLINUX_KERNEL_ARGS' in order to allow
for specific kernel parameters to be set when using syslinux.
The extra kernel parameters are added to btype[1] and then written out
as part of the APPEND field.
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Prabhu Sundararaj <prabhu.sundararaj@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
remove_duplicated does
* instead of hard coding list of sstate enabled task use
the same function as remove_duplicated to find them in
sstate-cache directory
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* there are 2 issues
* all *gcc* recipes produce "duplicate" files and we cannot keep just the newest one:
OE qemux86@ ~/build/oe-core $ find sstate-cache/ | grep gcc.*populate_lic
sstate-cache/cd/sstate:gcc::4.8.2:r0::3:cd8d1a33b832662b624f5e4bd9f55154_populate_lic.tgz
sstate-cache/cd/sstate:gcc::4.8.2:r0::3:cd8d1a33b832662b624f5e4bd9f55154_populate_lic.tgz.siginfo
sstate-cache/d5/sstate:gcc::4.8.2:r0::3:d591af812395cc386e017fa2c8fa0722_populate_lic.tgz
sstate-cache/d5/sstate:gcc::4.8.2:r0::3:d591af812395cc386e017fa2c8fa0722_populate_lic.tgz.siginfo
sstate-cache/f7/sstate:gcc::4.8.2:r0::3:f74cfd4982fd7c349a5418f07297f955_populate_lic.tgz
sstate-cache/f7/sstate:gcc::4.8.2:r0::3:f74cfd4982fd7c349a5418f07297f955_populate_lic.tgz.siginfo
sstate-cache/74/sstate:gcc::4.8.2:r0::3:7489e4502cb446506b9829cda13c7630_populate_lic.tgz
sstate-cache/74/sstate:gcc::4.8.2:r0::3:7489e4502cb446506b9829cda13c7630_populate_lic.tgz.siginfo
OE qemux86@ ~/build/oe-core $ find tmp-eglibc/stamps/ | grep gcc.*populate_lic
tmp-eglibc/stamps/i586-oe-linux/gcc-cross-initial/4.8.2-r0.do_populate_lic_setscene.cd8d1a33b832662b624f5e4bd9f55154
tmp-eglibc/stamps/i586-oe-linux/libgcc/4.8.2-r0.do_populate_lic_setscene.f74cfd4982fd7c349a5418f07297f955
tmp-eglibc/stamps/i586-oe-linux/gcc-cross/4.8.2-r0.do_populate_lic_setscene.d591af812395cc386e017fa2c8fa0722
tmp-eglibc/stamps/i586-oe-linux/gcc-runtime/4.8.2-r0.do_populate_lic_setscene.7489e4502cb446506b9829cda13c7630
* the same for target and native versions of the same recipe:
OE qemux86@ ~/build/oe-core $ find tmp-eglibc/stamps/ | grep opkg-utils.*populate_lic
tmp-eglibc/stamps/x86_64-linux/opkg-utils-native/0.1.8+gitAUTOINC+c33b217016-r0.do_populate_lic_setscene.dd21a3c5444482ce90be4c9a33d806f1
tmp-eglibc/stamps/i586-oe-linux/opkg-utils/0.1.8+gitAUTOINC+c33b217016-r0.do_populate_lic_setscene.8571422f9e311dc41bb6b21e71a09bc0
OE qemux86@ ~/build/oe-core $ find sstate-cache/ | grep opkg-utils.*populate_lic
sstate-cache/dd/sstate:opkg-utils::0.1.8+gitAUTOINC+c33b217016:r0::3:dd21a3c5444482ce90be4c9a33d806f1_populate_lic.tgz.siginfo
sstate-cache/dd/sstate:opkg-utils::0.1.8+gitAUTOINC+c33b217016:r0::3:dd21a3c5444482ce90be4c9a33d806f1_populate_lic.tgz
sstate-cache/85/sstate:opkg-utils::0.1.8+gitAUTOINC+c33b217016:r0::3:8571422f9e311dc41bb6b21e71a09bc0_populate_lic.tgz.siginfo
sstate-cache/85/sstate:opkg-utils::0.1.8+gitAUTOINC+c33b217016:r0::3:8571422f9e311dc41bb6b21e71a09bc0_populate_lic.tgz
* similar problem for .siginfo file of do_patch:
OE qemux86@ ~/build/oe-core $ find sstate-cache/ | grep eglibc.*patch
sstate-cache/99/sstate:eglibc::2.19:r0::3:99b7e1d688e4c6c659b458c9c57611df_patch.tgz.siginfo
sstate-cache/11/sstate:eglibc::2.19:r0::3:11401ddd208a753fee17696b14dc1e52_patch.tgz.siginfo
OE qemux86@ ~/build/oe-core $ find tmp-eglibc/stamps/ | grep /eglibc.*patch
tmp-eglibc/stamps/i586-oe-linux/eglibc-initial/2.19-r0.do_patch.sigdata.99b7e1d688e4c6c659b458c9c57611df
tmp-eglibc/stamps/i586-oe-linux/eglibc/2.19-r0.do_patch.sigdata.11401ddd208a753fee17696b14dc1e52
* maybe these should have ideally identical signatures, but before it's fixed lets
just skip removing them
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* it's possible that corresponding .tgz files were already removed
(e.g. with -d option and older version of this script) and this
won't find orphaned .siginfo or .done files to remove
* add sort -u to count files found multiple times only once
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* there are .siginfo files in sstate-cache, but STAMPS_DIR calls them
.sigdata, make sure that such signatures are kept, because some tasks
like do_package, don't have _setscene or main task entry and are
removed:
stamps:
tmp-eglibc/stamps/i586-oe-linux/busybox/1.22.1-r0.do_package.sigdata.cd6f625471ef1b20a9379e90519db6f1
tmp-eglibc/stamps/i586-oe-linux/busybox/1.22.1-r0.do_package_write_ipk.f20fe66285219f23373fc64d5de1d412
tmp-eglibc/stamps/i586-oe-linux/busybox/1.22.1-r0.do_package_write_ipk.sigdata.f20fe66285219f23373fc64d5de1d412
tmp-eglibc/stamps/i586-oe-linux/busybox/1.22.1-r0.do_packagedata.sigdata.c55a3dbe90010c15aa3294753fbd402e
tmp-eglibc/stamps/i586-oe-linux/busybox/1.22.1-r0.do_packagedata_setscene.c55a3dbe90010c15aa3294753fbd402e.qemux86
sstate (we want to keep all in this case):
sstate-cache/c5/sstate:busybox:i586-oe-linux:1.22.1:r0:i586:3:c55a3dbe90010c15aa3294753fbd402e_packagedata.tgz
sstate-cache/c5/sstate:busybox:i586-oe-linux:1.22.1:r0:i586:3:c55a3dbe90010c15aa3294753fbd402e_packagedata.tgz.siginfo
sstate-cache/cd/sstate:busybox:i586-oe-linux:1.22.1:r0:i586:3:cd6f625471ef1b20a9379e90519db6f1_package.tgz
sstate-cache/cd/sstate:busybox:i586-oe-linux:1.22.1:r0:i586:3:cd6f625471ef1b20a9379e90519db6f1_package.tgz.siginfo
sstate-cache/f2/sstate:busybox:i586-oe-linux:1.22.1:r0:i586:3:f20fe66285219f23373fc64d5de1d412_package_write_ipk.tgz
sstate-cache/f2/sstate:busybox:i586-oe-linux:1.22.1:r0:i586:3:f20fe66285219f23373fc64d5de1d412_package_write_ipk.tgz.siginfo
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The wic command-line param --rootfs-dir gets generalized to support
multiple directories. Each '--rootfs-dir' could be connected using a
special string, that should be present in .wks. I.e:
wic create ... --rootfs-dir rootfs1=/some/rootfs/dir \
--rootfs-dir rootfs2=/some/other/rootfs/dir
part / --source rootfs --rootfs-dir="rootfs1" --ondisk sda --fstype=ext3 \
--label primary --align 1024
part /standby --source rootfs --rootfs-dir="rootfs2" \
--ondisk sda --fstype=ext3 --label secondary --align 1024
The user could use harded-code directory instead of connectors. Like this:
wic create ... hard-coded-path.wks -r /some/rootfs/dir
part / --source rootfs --ondisk sda --fstype=ext3 --label primary --align 1024
part /standby --source rootfs --rootfs-dir=/some/rootfs/dir \
--ondisk sda --fstype=ext3 --label secondary --align 1024
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When a .wks has more than one ROOTFS_DIR it's better to report
all ROOTFS_DIR that was used to create the image.
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The '--rootfs-dir' option is optional and only takes efect is a
partition is set up like this:
part /standby --source rootfs --rootfs-dir=<special rootfs> ...
So '--rootfs-dir' is used instead of bitbake ROOTFS_DIR variable or
'-r' param.
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When a partition from .wks file is set up like this:
part /standby --source rootfs --rootfs-dir=<special rootfs> ... --label \
--label secondary
This means that 'rootfs' must use '<special rootfs>' as rootfs and
the default partition filename in /var/tmp/wic/build/ will be create
using the '--label' as part of the name. E.g:
/var/tmp/wic/build/rootfs_secondary.ext3
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The do_prepare_partition() method from RootfsPlugin class need
to know what will be the rootfs_dir. This makes sense when .wks
file has a partition set up like this:
part /standby --source rootfs --rootfs-dir=<special rootfs> ...
then do_prepare_partition() will work with the correct rootfs.
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove the 'rootfs' case when internal call code is used and
replace to call the general-purpose plugin.
For now RootfsPluing class continues to invoke prepare_rootfs()
method from Wic_PartData. However RootfsPlugin could implement them.
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Implement RootfsPlugin class. The do_prepare_partition() method
is implemented using code in Wic_PartData class.
This class have 'rootfs' name, which is the name that should
be used in the --source parameters of the .wks partition commands.
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|