diff options
Diffstat (limited to 'meta')
| -rw-r--r-- | meta/packages/linux/linux-rp-2.6.19+2.6.20-rc4/vesafb-tng-1.0-rc2-2.6.20-rc2.patch (renamed from meta/packages/linux/linux-rp-2.6.19+2.6.20-rc4/vesafb-tng-1.0-rc2-git-20060629.patch) | 364 | ||||
| -rw-r--r-- | meta/packages/linux/linux-rp_2.6.19+2.6.20-rc4.bb | 1 |
2 files changed, 209 insertions, 156 deletions
diff --git a/meta/packages/linux/linux-rp-2.6.19+2.6.20-rc4/vesafb-tng-1.0-rc2-git-20060629.patch b/meta/packages/linux/linux-rp-2.6.19+2.6.20-rc4/vesafb-tng-1.0-rc2-2.6.20-rc2.patch index 188ce6094e..b1b0fc3549 100644 --- a/meta/packages/linux/linux-rp-2.6.19+2.6.20-rc4/vesafb-tng-1.0-rc2-git-20060629.patch +++ b/meta/packages/linux/linux-rp-2.6.19+2.6.20-rc4/vesafb-tng-1.0-rc2-2.6.20-rc2.patch @@ -1,22 +1,7 @@ -# Patch generated against a6047eef1c465c38aacfbdab193161b3f0cd144 ---- -# Documentation/fb/vesafb.txt | 250 ++++-- -# arch/i386/boot/video.S | 12 -# drivers/video/Kconfig | 56 + -# drivers/video/Makefile | 6 -# drivers/video/fbmem.c | 1 -# drivers/video/modedb.c | 1 -# drivers/video/vesafb-thread.c | 727 +++++++++++++++++++ -# drivers/video/vesafb-tng.c | 1598 ++++++++++++++++++++++++++++++++++++++++++ -# include/linux/sched.h | 2 -# include/video/vesa.h | 150 +++ -# kernel/fork.c | 35 -# mm/memory.c | 1 -# mm/mmap.c | 1 -# 13 files changed, 2748 insertions(+), 92 deletions(-) -# ---- linux-2.6.17.orig/Documentation/fb/vesafb.txt -+++ linux-2.6.17/Documentation/fb/vesafb.txt +diff --git a/Documentation/fb/vesafb.txt b/Documentation/fb/vesafb.txt +index ee277dd..93d6e6e 100644 +--- a/Documentation/fb/vesafb.txt ++++ b/Documentation/fb/vesafb.txt @@ -2,16 +2,18 @@ What is vesafb? =============== @@ -94,7 +79,7 @@ Linux_kernel_mode_number = VESA_mode_number + 0x200 -@@ -56,15 +67,15 @@ So the table for the Kernel mode numbers +@@ -56,15 +67,15 @@ So the table for the Kernel mode numbers are: | 640x480 800x600 1024x768 1280x1024 ----+------------------------------------- @@ -118,7 +103,7 @@ If this does not work, this might be because your BIOS does not support linear framebuffers or because it does not support this mode at all. -@@ -72,11 +83,12 @@ Even if your board does, it might be the +@@ -72,11 +83,12 @@ Even if your board does, it might be the BIOS which does not. VESA BIOS Extensions v2.0 are required, 1.2 is NOT sufficient. You will get a "bad mode number" message if something goes wrong. @@ -132,7 +117,7 @@ X11 === -@@ -84,98 +96,164 @@ XF68_FBDev should work just fine, but it +@@ -84,98 +96,164 @@ XF68_FBDev should work just fine, but it is non-accelerated. Running another (accelerated) X-Server like XF86_SVGA might or might not work. It depends on X-Server and graphics board. @@ -152,13 +137,13 @@ +With VBE 3.0 compatible BIOSes and vesafb-tng it is possible to change +the refresh rate either at boot time (by specifying the @<rr> part of +the mode name) or later, using the fbset utility. ++ ++If you want to use the default BIOS refresh rate while switching modes ++on a running system, set pixclock to 0. - * configure and load the DOS-Tools for your the graphics board (if - available) and boot linux with loadlin. - * use a native driver (matroxfb/atyfb) instead if vesafb. If none -+If you want to use the default BIOS refresh rate while switching modes -+on a running system, set pixclock to 0. -+ +With VBE 2.0 there is no way to change the mode timings after booting +Linux. If you are not happy with the 60 Hz refresh rate, you have +the following options: @@ -189,25 +174,15 @@ -to pan the display. It is turned off by default because it -seems not to work with some BIOS versions, but there are options -to turn it on. -+The VESA BIOS provides protected mode interface for changing some parameters. -+vesafb can use it for palette changes and to pan the display. It is turned -+off by default because it seems not to work with some BIOS versions, but -+there are options to turn it on. - +- -You can pass options to vesafb using "video=vesafb:option" on -the kernel command line. Multiple options should be separated -by comma, like this: "video=vesafb:ypan,invers" -+You can pass options to vesafb using "video=vesafb:option" on the kernel -+command line. Multiple options should be separated by a comma, like this: -+"video=vesafb:ypan,1024x768-32@85" - +- -Accepted options: -+Note that vesafb-tng still uses the "video=vesafb:option" format of the -+kernel command line video parameter. "video=vesafb-tng:xxx" is incorrect. - +- -invers no comment... -+Accepted options (both vesafb and vesafb-tng): - +- -ypan enable display panning using the VESA protected mode - interface. The visible screen is just a window of the - video memory, console scrolling is done by changing the @@ -219,6 +194,43 @@ - kontra: * scrolling only parts of the screen causes some - ugly flicker effects (boot logo flickers for - example). +- +-ywrap Same as ypan, but assumes your gfx board can wrap-around +- the video memory (i.e. starts reading from top if it +- reaches the end of video memory). Faster than ypan. +- +-redraw scroll by redrawing the affected part of the screen, this +- is the safe (and slow) default. +- +- +-vgapal Use the standard vga registers for palette changes. +- This is the default. +-pmipal Use the protected mode interface for palette changes. +- +-mtrr:n setup memory type range registers for the vesafb framebuffer +- where n: +- 0 - disabled (equivalent to nomtrr) (default) +- 1 - uncachable +- 2 - write-back +- 3 - write-combining +- 4 - write-through +- +- If you see the following in dmesg, choose the type that matches the +- old one. In this example, use "mtrr:2". ++The VESA BIOS provides protected mode interface for changing some parameters. ++vesafb can use it for palette changes and to pan the display. It is turned ++off by default because it seems not to work with some BIOS versions, but ++there are options to turn it on. ++ ++You can pass options to vesafb using "video=vesafb:option" on the kernel ++command line. Multiple options should be separated by a comma, like this: ++"video=vesafb:ypan,1024x768-32@85" ++ ++Note that vesafb-tng still uses the "video=vesafb:option" format of the ++kernel command line video parameter. "video=vesafb-tng:xxx" is incorrect. ++ ++Accepted options (both vesafb and vesafb-tng): ++ +ypan Enable display panning using the VESA protected mode interface + The visible screen is just a window of the video memory, + console scrolling is done by changing the start of the window. @@ -229,34 +241,19 @@ + con: * scrolling only parts of the screen causes some + ugly flicker effects (boot logo flickers for + example). - --ywrap Same as ypan, but assumes your gfx board can wrap-around -- the video memory (i.e. starts reading from top if it -- reaches the end of video memory). Faster than ypan. ++ +ywrap Same as ypan, but assumes your gfx board can wrap-around the video + memory (i.e. starts reading from top if it reaches the end of + video memory). Faster than ypan. - --redraw scroll by redrawing the affected part of the screen, this -- is the safe (and slow) default. ++ +redraw Scroll by redrawing the affected part of the screen, this is the + safe (and slow) default. - ++ +vgapal Use the standard VGA registers for palette changes. - --vgapal Use the standard vga registers for palette changes. -- This is the default. --pmipal Use the protected mode interface for palette changes. ++ +pmipal Use the protected mode interface for palette changes. + This is the default is the protected mode interface is available. - --mtrr:n setup memory type range registers for the vesafb framebuffer -- where n: -- 0 - disabled (equivalent to nomtrr) (default) -- 1 - uncachable -- 2 - write-back -- 3 - write-combining -- 4 - write-through ++ +mtrr:n Setup memory type range registers for the vesafb framebuffer + where n: + 0 - disabled (equivalent to nomtrr) (default) @@ -264,9 +261,7 @@ + 2 - write-back + 3 - write-combining + 4 - write-through - -- If you see the following in dmesg, choose the type that matches the -- old one. In this example, use "mtrr:2". ++ + If you see the following in dmesg, choose the type that matches + the old one. In this example, use "mtrr:2". ... @@ -291,8 +286,7 @@ -Have fun! +Options accepted only by vesafb-tng: - -- Gerd ++ +<mode> The mode you want to set, in the standard modedb format. Refer to + modedb.txt for a detailed description. If you specify a mode that is + not supported by your board's BIOS, vesafb-tng will attempt to set a @@ -337,7 +331,8 @@ +maxhf:n Maximum horizontal frequency (in kHz). +maxvf:n Maximum vertical frequency (in Hz). +maxclk:n Maximum pixel clock (in MHz). -+ + +- Gerd +Have fun! -- @@ -352,9 +347,11 @@ +Extended documentation for vm86, VBE 3.0 and vesafb-tng by +Michal Januszewski <spock@gentoo.org> + ---- linux-2.6.17.orig/arch/i386/boot/video.S -+++ linux-2.6.17/arch/i386/boot/video.S -@@ -165,10 +165,12 @@ basret: ret +diff --git a/arch/i386/boot/video.S b/arch/i386/boot/video.S +index 2c5b5cc..2c2d4b5 100644 +--- a/arch/i386/boot/video.S ++++ b/arch/i386/boot/video.S +@@ -163,10 +163,12 @@ basret: ret # parameters in the default 80x25 mode -- these are set directly, # because some very obscure BIOSes supply insane values. mode_params: @@ -367,7 +364,7 @@ movb $0x03, %ah # Read cursor position xorb %bh, %bh int $0x10 -@@ -201,6 +203,7 @@ mopar2: movb %al, %fs:(PARAM_VIDEO_LINES +@@ -199,6 +201,7 @@ mopar2: movb %al, %fs:(PARAM_VIDEO_LINES) ret #ifdef CONFIG_VIDEO_SELECT @@ -375,7 +372,7 @@ # Fetching of VESA frame buffer parameters mopar_gr: leaw modelist+1024, %di -@@ -283,6 +286,7 @@ dac_done: +@@ -281,6 +284,7 @@ dac_done: movw %es, %fs:(PARAM_VESAPM_SEG) movw %di, %fs:(PARAM_VESAPM_OFF) no_pm: ret @@ -383,7 +380,7 @@ # The video mode menu mode_menu: -@@ -497,10 +501,12 @@ mode_set: +@@ -495,10 +499,12 @@ mode_set: cmpb $VIDEO_FIRST_V7>>8, %ah jz setv7 @@ -398,7 +395,7 @@ orb %ah, %ah jz setmenu -@@ -572,6 +578,7 @@ setr1: lodsw +@@ -570,6 +576,7 @@ setr1: lodsw movw -4(%si), %ax # Fetch mode ID jmp _m_s @@ -406,7 +403,7 @@ check_vesa: leaw modelist+1024, %di subb $VIDEO_FIRST_VESA>>8, %bh -@@ -605,6 +612,7 @@ check_vesa: +@@ -603,6 +610,7 @@ check_vesa: ret _setbad: jmp setbad # Ugly... @@ -414,9 +411,24 @@ # Recalculate vertical display end registers -- this fixes various # inconsistencies of extended modes on many adapters. Called when ---- linux-2.6.17.orig/drivers/video/Kconfig -+++ linux-2.6.17/drivers/video/Kconfig -@@ -472,8 +472,22 @@ config FB_TGA +diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c +index 1393523..8a05f95 100644 +--- a/drivers/char/sysrq.c ++++ b/drivers/char/sysrq.c +@@ -240,7 +240,7 @@ static void send_sig_all(int sig) + struct task_struct *p; + + for_each_process(p) { +- if (p->mm && !is_init(p)) ++ if (p->mm && !is_init(p) && !(p->flags & PF_BORROWED_MM)) + /* Not swapper, init nor kernel thread */ + force_sig(sig, p); + } +diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig +index 4e83f01..ae122fd 100644 +--- a/drivers/video/Kconfig ++++ b/drivers/video/Kconfig +@@ -547,8 +547,22 @@ config FB_TGA cards. Say Y if you have one of those. config FB_VESA @@ -441,7 +453,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT -@@ -481,7 +495,43 @@ config FB_VESA +@@ -557,7 +571,43 @@ config FB_VESA This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. You will get a boot time penguin logo at no additional cost. Please @@ -459,14 +471,14 @@ + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help -+ This is the frame buffer device driver for generic VESA 2.0 -+ compliant graphic cards. It is capable of taking advantage of -+ VBE 3.0 features. With this driver you will be able to adjust -+ the refresh rate (VBE 3.0 compliant boards only) and change -+ the graphic mode on-the-fly. -+ -+ You will also get a boot time penguin logo at no additional cost. Please -+ read <file:Documentation/fb/vesafb.txt>. ++ This is an enhanced generic frame buffer device driver for ++ VBE 2.0 compliant graphic cards. It can take advantage of VBE 3.0 ++ features (refresh rate adjustment) when these are available. ++ The driver also makes it possible to change the video mode ++ on the fly and to switch back to text mode when it's unloaded. ++ ++ If the driver is compiled as a module, the module will be called ++ vesafb-tng. + +endchoice + @@ -484,12 +496,14 @@ + depends on FB_VESA + default y - config VIDEO_SELECT - bool ---- linux-2.6.17.orig/drivers/video/Makefile -+++ linux-2.6.17/drivers/video/Makefile -@@ -97,7 +97,11 @@ obj-$(CONFIG_FB_IMX) += imx - obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o + config FB_IMAC + bool "Intel-based Macintosh Framebuffer Support" +diff --git a/drivers/video/Makefile b/drivers/video/Makefile +index 309a26d..e57b0e7 100644 +--- a/drivers/video/Makefile ++++ b/drivers/video/Makefile +@@ -102,7 +102,11 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx4008/ + obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o # Platform or fallback drivers go here -obj-$(CONFIG_FB_VESA) += vesafb.o @@ -498,12 +512,14 @@ +else + obj-$(CONFIG_FB_VESA) += vesafb-thread.o vesafb-tng.o +endif + obj-$(CONFIG_FB_IMAC) += imacfb.o obj-$(CONFIG_FB_VGA16) += vga16fb.o vgastate.o obj-$(CONFIG_FB_OF) += offb.o - ---- linux-2.6.17.orig/drivers/video/fbmem.c -+++ linux-2.6.17/drivers/video/fbmem.c -@@ -1438,6 +1438,7 @@ fbmem_init(void) +diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c +index 3cfea31..bfb39cc 100644 +--- a/drivers/video/fbmem.c ++++ b/drivers/video/fbmem.c +@@ -1408,6 +1408,7 @@ fbmem_init(void) printk(KERN_WARNING "Unable to create fb class; errno = %ld\n", PTR_ERR(fb_class)); fb_class = NULL; } @@ -511,9 +527,11 @@ return 0; } ---- linux-2.6.17.orig/drivers/video/modedb.c -+++ linux-2.6.17/drivers/video/modedb.c -@@ -671,6 +671,7 @@ void fb_var_to_videomode(struct fb_video +diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c +index 5df41f6..f838a53 100644 +--- a/drivers/video/modedb.c ++++ b/drivers/video/modedb.c +@@ -674,6 +674,7 @@ void fb_var_to_videomode(struct fb_videomode *mode, { u32 pixclock, hfreq, htotal, vtotal; @@ -521,9 +539,17 @@ mode->name = NULL; mode->xres = var->xres; mode->yres = var->yres; +@@ -1025,3 +1026,4 @@ EXPORT_SYMBOL(fb_find_best_mode); + EXPORT_SYMBOL(fb_find_nearest_mode); + EXPORT_SYMBOL(fb_videomode_to_modelist); + EXPORT_SYMBOL(fb_find_mode); ++EXPORT_SYMBOL(fb_destroy_modelist); +diff --git a/drivers/video/vesafb-thread.c b/drivers/video/vesafb-thread.c +new file mode 100644 +index 0000000..543e202 --- /dev/null -+++ linux-2.6.17/drivers/video/vesafb-thread.c -@@ -0,0 +1,727 @@ ++++ b/drivers/video/vesafb-thread.c +@@ -0,0 +1,751 @@ +/* + * Framebuffer driver for VBE 2.0+ compliant graphic boards. + * Kernel thread and vm86 routines. @@ -532,8 +558,6 @@ + * + */ + -+#include <linux/config.h> -+#include <linux/slab.h> +#include <linux/workqueue.h> +#include <linux/completion.h> +#include <linux/module.h> @@ -542,6 +566,7 @@ +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/signal.h> ++#include <linux/freezer.h> +#include <linux/suspend.h> +#include <linux/unistd.h> +#include <video/vesa.h> @@ -554,9 +579,7 @@ +#include <asm/mmu_context.h> +#include "edid.h" + -+#ifdef MODULE -+int errno; -+#endif ++static int errno; + +static DECLARE_COMPLETION(vesafb_th_completion); +static DECLARE_MUTEX(vesafb_task_list_sem); @@ -566,9 +589,6 @@ +static struct vm86_struct vm86; +static int vesafb_pid = 0; + -+_syscall3(int,ioperm,unsigned long, a, unsigned long, b, unsigned long, c); -+_syscall1(int,vm86old,struct vm86_struct __user*, v86); -+ +#define DEFAULT_VM86_FLAGS (IF_MASK | IOPL_MASK) +#define VM86_PUSHW(x) \ +do { \ @@ -601,6 +621,36 @@ + +#define FLAG_D (1 << 10) + ++/* Syscalls used by the vesafb thread */ ++static int vm86old(struct vm86_struct __user* v86) ++{ ++ long res; ++ __asm__ volatile ("push %%ebx; movl %2, %%ebx ; int $0x80 ; pop %%ebx" ++ : "=a" (res) ++ : "0" (__NR_vm86old), "ri" ((long)(v86)) : "memory"); ++ ++ if ((unsigned long)(res) >= (unsigned long)(-MAX_ERRNO)) { ++ errno = -res; ++ res = -1; ++ } ++ return (int)res; ++} ++ ++static int ioperm(unsigned long a, unsigned long b, unsigned long c) ++{ ++ long res; ++ __asm__ volatile ("push %%ebx; movl %2, %%ebx ; int $0x80 ; pop %%ebx" ++ : "=a" (res) ++ : "0" (__NR_ioperm), "ri" ((long)(a)), "c" ((long)(b)), ++ "d" ((long)(c)) : "memory"); ++ ++ if ((unsigned long)(res) >= (unsigned long)(-MAX_ERRNO)) { ++ errno = -res; ++ res = -1; ++ } ++ return (int)res; ++} ++ +/* Segment prefix opcodes */ +enum { + P_CS = 0x2e, @@ -962,7 +1012,7 @@ + struct mm_struct *mm = current->mm; + int ret = 0; + -+ vma = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL); ++ vma = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + if (!vma) + return -ENOMEM; + memset(vma, 0, sizeof(*vma)); @@ -1251,9 +1301,12 @@ +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michal Januszewski"); + +diff --git a/drivers/video/vesafb-tng.c b/drivers/video/vesafb-tng.c +new file mode 100644 +index 0000000..b4d4394 --- /dev/null -+++ linux-2.6.17/drivers/video/vesafb-tng.c -@@ -0,0 +1,1598 @@ ++++ b/drivers/video/vesafb-tng.c +@@ -0,0 +1,1586 @@ +/* + * Framebuffer driver for VBE 2.0+ compliant graphic boards + * @@ -2027,16 +2080,10 @@ + int clen = 0, i; + + for (i = 0; i < vbe_modes_cnt; i++) { -+ clen += sprintf(buf + clen, "%dx%d-%d\n", vbe_modes[i].x_res, -+ vbe_modes[i].y_res, vbe_modes[i].depth); -+ } -+ *start = buf + offset; -+ -+ if (clen > offset) { -+ clen -= offset; -+ } else { -+ clen = 0; ++ clen += min(snprintf(buf + clen, len - clen, "%dx%d-%d\n", vbe_modes[i].x_res, ++ vbe_modes[i].y_res, vbe_modes[i].depth), len - clen); + } ++ *eof = 1; + return clen; +} + @@ -2045,25 +2092,19 @@ +{ + int clen = 0; + -+ clen += sprintf(buf + clen, "Version: %d.%d\n", ++ clen += min(snprintf(buf + clen, len, "Version: %d.%d\n", + ((vbe_ib.vbe_version & 0xff00) >> 8), -+ vbe_ib.vbe_version & 0xff); -+ clen += sprintf(buf + clen, "Vendor: %s\n", -+ (char*)vbe_ib.oem_vendor_name_ptr); -+ clen += sprintf(buf + clen, "Product: %s\n", -+ (char*)vbe_ib.oem_product_name_ptr); -+ clen += sprintf(buf + clen, "OEM rev: %s\n", -+ (char*)vbe_ib.oem_product_rev_ptr); -+ clen += sprintf(buf + clen, "OEM string: %s\n", -+ (char*)vbe_ib.oem_string_ptr); -+ -+ *start = buf + offset; -+ -+ if (clen > offset) { -+ clen -= offset; -+ } else { -+ clen = 0; -+ } ++ vbe_ib.vbe_version & 0xff), len); ++ clen += min(snprintf(buf + clen, len - clen, "Vendor: %s\n", ++ (char*)vbe_ib.oem_vendor_name_ptr), len - clen); ++ clen += min(snprintf(buf + clen, len - clen, "Product: %s\n", ++ (char*)vbe_ib.oem_product_name_ptr), len - clen); ++ clen += min(snprintf(buf + clen, len - clen, "OEM rev: %s\n", ++ (char*)vbe_ib.oem_product_rev_ptr), len - clen); ++ clen += min(snprintf(buf + clen, len - clen, "OEM string: %s\n", ++ (char*)vbe_ib.oem_string_ptr), len - clen); ++ ++ *eof = 1; + return clen; +} + @@ -2817,8 +2858,8 @@ +MODULE_PARM_DESC(vgapal,"bool: set palette using VGA registers"); +module_param_named(pmipal, pmi_setpal, bool, 0); +MODULE_PARM_DESC(pmipal,"bool: set palette using PMI calls"); -+module_param_named(nomtrr, mtrr, invbool, 0); -+MODULE_PARM_DESC(nomtrr,"bool: disable use of MTRR registers"); ++module_param(mtrr, uint, 0); ++MODULE_PARM_DESC(mtrr,"Memory Type Range Registers setting. Use 0 to disable."); +module_param(blank, bool, 1); +MODULE_PARM_DESC(blank,"bool: enable hardware blanking"); +module_param(nocrtc, bool, 0); @@ -2852,9 +2893,11 @@ +MODULE_AUTHOR("Michal Januszewski"); +MODULE_DESCRIPTION("Framebuffer driver for VBE2.0+ compliant graphics boards"); + ---- linux-2.6.17.orig/include/linux/sched.h -+++ linux-2.6.17/include/linux/sched.h -@@ -1159,6 +1159,8 @@ extern void mmput(struct mm_struct *); +diff --git a/include/linux/sched.h b/include/linux/sched.h +index 4463735..7283e48 100644 +--- a/include/linux/sched.h ++++ b/include/linux/sched.h +@@ -1390,6 +1390,8 @@ extern void mmput(struct mm_struct *); extern struct mm_struct *get_task_mm(struct task_struct *task); /* Remove the current tasks stale references to the old mm_struct */ extern void mm_release(struct task_struct *, struct mm_struct *); @@ -2863,8 +2906,11 @@ extern int copy_thread(int, unsigned long, unsigned long, unsigned long, struct task_struct *, struct pt_regs *); extern void flush_thread(void); +diff --git a/include/video/vesa.h b/include/video/vesa.h +new file mode 100644 +index 0000000..bb5abcf --- /dev/null -+++ linux-2.6.17/include/video/vesa.h ++++ b/include/video/vesa.h @@ -0,0 +1,150 @@ +#if 0 +#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , \ @@ -3016,17 +3062,19 @@ + struct vesafb_crtc_ib crtc; +}; + ---- linux-2.6.17.orig/kernel/fork.c -+++ linux-2.6.17/kernel/fork.c -@@ -97,6 +97,7 @@ kmem_cache_t *fs_cachep; +diff --git a/kernel/fork.c b/kernel/fork.c +index fc723e5..dc8f93b 100644 +--- a/kernel/fork.c ++++ b/kernel/fork.c +@@ -100,6 +100,7 @@ struct kmem_cache *fs_cachep; /* SLAB cache for vm_area_struct structures */ - kmem_cache_t *vm_area_cachep; + struct kmem_cache *vm_area_cachep; +EXPORT_SYMBOL_GPL(vm_area_cachep); /* SLAB cache for mm_struct structures (tsk->mm) */ - static kmem_cache_t *mm_cachep; -@@ -383,6 +384,40 @@ void mmput(struct mm_struct *mm) + static struct kmem_cache *mm_cachep; +@@ -399,6 +400,40 @@ void mmput(struct mm_struct *mm) EXPORT_SYMBOL_GPL(mmput); /** @@ -3067,9 +3115,11 @@ * get_task_mm - acquire a reference to the task's mm * * Returns %NULL if the task has no mm. Checks PF_BORROWED_MM (meaning ---- linux-2.6.17.orig/mm/memory.c -+++ linux-2.6.17/mm/memory.c -@@ -1162,6 +1162,7 @@ int zeromap_page_range(struct vm_area_st +diff --git a/mm/memory.c b/mm/memory.c +index 563792f..a9519ea 100644 +--- a/mm/memory.c ++++ b/mm/memory.c +@@ -1193,6 +1193,7 @@ int zeromap_page_range(struct vm_area_struct *vma, } while (pgd++, addr = next, addr != end); return err; } @@ -3077,9 +3127,11 @@ pte_t * fastcall get_locked_pte(struct mm_struct *mm, unsigned long addr, spinlock_t **ptl) { ---- linux-2.6.17.orig/mm/mmap.c -+++ linux-2.6.17/mm/mmap.c -@@ -1996,6 +1996,7 @@ int insert_vm_struct(struct mm_struct * +diff --git a/mm/mmap.c b/mm/mmap.c +index 9717337..6fa5b1c 100644 +--- a/mm/mmap.c ++++ b/mm/mmap.c +@@ -2024,6 +2024,7 @@ int insert_vm_struct(struct mm_struct * mm, struct vm_area_struct * vma) vma_link(mm, vma, prev, rb_link, rb_parent); return 0; } diff --git a/meta/packages/linux/linux-rp_2.6.19+2.6.20-rc4.bb b/meta/packages/linux/linux-rp_2.6.19+2.6.20-rc4.bb index ef1d0bd2ac..d15141fa53 100644 --- a/meta/packages/linux/linux-rp_2.6.19+2.6.20-rc4.bb +++ b/meta/packages/linux/linux-rp_2.6.19+2.6.20-rc4.bb @@ -44,6 +44,7 @@ SRC_URI = "http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.20-rc4. file://pxa-serial-hack.patch;patch=1;status=hack \ file://connectplus-remove-ide-HACK.patch;patch=1;status=hack \ file://squashfs3.0-2.6.15.patch;patch=1;status=external \ + file://vesafb-tng-1.0-rc2-2.6.20-rc2.patch;patch=1;status=external \ file://defconfig-c7x0 \ file://defconfig-hx2000 \ file://defconfig-collie \ |