diff options
Diffstat (limited to 'meta/conf')
| -rw-r--r-- | meta/conf/bblayers.conf.sample | 10 | ||||
| -rw-r--r-- | meta/conf/local.conf.sample | 151 | ||||
| -rw-r--r-- | meta/conf/site.conf.sample | 40 |
3 files changed, 201 insertions, 0 deletions
diff --git a/meta/conf/bblayers.conf.sample b/meta/conf/bblayers.conf.sample new file mode 100644 index 0000000000..d361f244d9 --- /dev/null +++ b/meta/conf/bblayers.conf.sample @@ -0,0 +1,10 @@ +# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +LCONF_VERSION = "2" + +BBFILES ?= "" +BBLAYERS = " \ + ##POKYBASE##/meta \ + ##POKYBASE##/meta-moblin \ + ##POKYBASE##/meta-emenlow \ + " diff --git a/meta/conf/local.conf.sample b/meta/conf/local.conf.sample new file mode 100644 index 0000000000..66acaa49a7 --- /dev/null +++ b/meta/conf/local.conf.sample @@ -0,0 +1,151 @@ +# CONF_VERSION is increased each time build/conf/ changes incompatibly +CONF_VERSION = "1" + +# Uncomment and change to cache the files Poky downloads in an alternative +# location, default it ${TOPDIR}/sources +#DL_DIR ?= "${TOPDIR}/sources" +# Uncomment and change to cache Poky's built staging output in an alternative +# location, default ${TOPDIR}/pstage +#PSTAGE_DIR ?= "${TOPDIR}/pstage" + +# Uncomment and set to allow bitbake to execute multiple tasks at once. +# For a quadcore, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would +# be appropriate. +# BB_NUMBER_THREADS = "4" +# Also, make can be passed flags so it run parallel threads e.g.: +# PARALLEL_MAKE = "-j 4" + +# The machine to target +MACHINE ?= "qemux86" + +# Other supported machines +#MACHINE ?= "qemuarm" +#MACHINE ?= "netbook" +#MACHINE ?= "c7x0" +#MACHINE ?= "akita" +#MACHINE ?= "spitz" +#MACHINE ?= "nokia770" +#MACHINE ?= "nokia800" +#MACHINE ?= "fic-gta01" +#MACHINE ?= "bootcdx86" +#MACHINE ?= "cm-x270" +#MACHINE ?= "em-x270" +#MACHINE ?= "htcuniversal" +#MACHINE ?= "mx31ads" +#MACHINE ?= "mx31litekit" +#MACHINE ?= "mx31phy" +#MACHINE ?= "zylonite" +#MACHINE ?= "igep0020" +#MACHINE ?= "igep0030" + +DISTRO ?= "poky" +# For bleeding edge / experimental / unstable package versions +# DISTRO ?= "poky-bleeding" + +BBMASK = "" + +# EXTRA_IMAGE_FEATURES allows extra packages to be added to the generated images +# (Some of these are automatically added to certain image types) +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "tools-profile" - add profiling tools (oprofile, exmap, lttng valgrind (x86 only)) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image for suitable of development +# e.g. ssh root access has a blank password +# There are other application targets too, see meta/classes/poky-image.bbclass +# and meta/packages/tasks/task-poky.bb for more details. + +EXTRA_IMAGE_FEATURES = "tools-debug tools-profile tools-testapps debug-tweaks" + +# The default IMAGE_FEATURES above are too large for the mx31phy and +# c700/c750 machines which have limited space. The code below limits +# the default features for those machines. +EXTRA_IMAGE_FEATURES_c7x0 = "tools-testapps debug-tweaks" +EXTRA_IMAGE_FEATURES_mx31phy = "debug-tweaks" +EXTRA_IMAGE_FEATURES_mx31ads = "tools-testapps debug-tweaks" + +# A list of packaging systems used in generated images +# The first package type listed will be used for rootfs generation +# include 'package_deb' for debs +# include 'package_ipk' for ipks +#PACKAGE_CLASSES ?= "package_deb package_ipk" +PACKAGE_CLASSES ?= "package_ipk" + +# A list of additional classes to use when building the system +# include 'image-prelink' in order to prelink the filesystem image +USER_CLASSES ?= "image-prelink" + +# POKYMODE controls the characteristics of the generated packages/images by +# telling poky which type of toolchain to use. +# +# Options include several different EABI combinations and a compatibility +# mode for the OABI mode poky previously used. +# +# The default is "eabi" +# Use "oabi" for machines with kernels < 2.6.18 on ARM for example. +# Use "external-MODE" to use the precompiled external toolchains where MODE +# is the type of external toolchain to use e.g. eabi. +# POKYMODE = "external-eabi" + +# Uncomment this to specify where BitBake should create its temporary files. +# Note that a full build of everything in OpenEmbedded will take GigaBytes of hard +# disk space, so make sure to free enough space. The default TMPDIR is +# <build directory>/tmp +#TMPDIR = "${POKYBASE}/build/tmp" + + +# Uncomment this if you are using the Openedhand provided qemu deb - see README +# ASSUME_PROVIDED += "qemu-native" + +# Comment this out if you don't have a 3.x gcc version available and wish +# poky to build one for you. The 3.x gcc is required to build qemu-native. +# ASSUME_PROVIDED += "gcc3-native" + +# Uncomment these two if you want BitBake to build images useful for debugging. +# DEBUG_BUILD = "1" +# INHIBIT_PACKAGE_STRIP = "1" + +# Uncomment these to build a package such that you can use gprof to profile it. +# NOTE: This will only work with 'linux' targets, not +# 'linux-uclibc', as uClibc doesn't provide the necessary +# object files. Also, don't build glibc itself with these +# flags, or it'll fail to build. +# +# PROFILE_OPTIMIZATION = "-pg" +# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}" +# LDFLAGS =+ "-pg" + +# Uncomment this if you want BitBake to emit debugging output +# BBDEBUG = "yes" +# Uncomment this if you want BitBake to emit the log if a build fails. +BBINCLUDELOGS = "yes" + +# Set this if you wish to make pkgconfig libraries from your system available +# for native builds. Combined with extra ASSUME_PROVIDEDs this can allow +# native builds of applications like oprofileui-native (unsupported feature). +#EXTRA_NATIVE_PKGCONFIG_PATH = ":/usr/lib/pkgconfig" +#ASSUME_PROVIDED += "gtk+-native libglade-native" + +ENABLE_BINARY_LOCALE_GENERATION = "1" + +# The architecture to build SDK items for, by setting this you can build SDK +# packages for architectures other than the host i.e. building i586 packages +# on an x86_64 host. +# Supported values are i586 and x86_64 +#SDKMACHINE ?= "i586" + +# Poky can try and fetch packaged-staging packages from a http, https or ftp +# mirror. Set this variable to the root of a pstage directory on a server. +#PSTAGE_MIRROR ?= "http://someserver.tld/share/pstage" + +# Set IMAGETEST to qemu if you want to build testcases and start +# testing in qemu after do_rootfs. +#IMAGETEST = "qemu" + +# By default testing will run the sanitytest suite. If you want to run other tests +# (e.g. bat), list them here +#TEST_SCEN = "sanitytest bat" diff --git a/meta/conf/site.conf.sample b/meta/conf/site.conf.sample new file mode 100644 index 0000000000..42042042f7 --- /dev/null +++ b/meta/conf/site.conf.sample @@ -0,0 +1,40 @@ +# +# local.conf covers user settings, site.conf covers site specific information +# such as proxy server addresses and optionally any shared download location +# +# SITE_CONF_VERSION is increased each time build/conf/site.conf +# changes incompatibly +SCONF_VERSION = "1" + +# Uncomment to cause CVS to use the proxy host specified +#CVS_PROXY_HOST = "proxy.example.com" +#CVS_PROXY_PORT = "81" + +# For svn, you need to create ~/.subversion/servers containing: +#[global] +#http-proxy-host = proxy.example.com +#http-proxy-port = 81 +# + +# Uncomment to cause git to use the proxy host specificed +# although this only works for http +#GIT_PROXY_HOST = "proxy.example.com" +#GIT_PROXY_PORT = "81" +#export GIT_PROXY_COMMAND = "${POKYBASE}/scripts/poky-git-proxy-command" + +# GIT_PROXY_IGNORE_* lines define hosts which do not require a proxy to access +#GIT_CORE_CONFIG = "Yes" +#GIT_PROXY_IGNORE_1 = "host.server.com" +#GIT_PROXY_IGNORE_2 = "another.server.com" + +# If SOCKS is available run the following command to comple a simple transport +# gcc scripts/poky-git-proxy-socks.c -o poky-git-proxy-socks +# and then share that binary somewhere in PATH, then use the following settings +#GIT_PROXY_HOST = "proxy.example.com" +#GIT_PROXY_PORT = "81" +#export GIT_PROXY_COMMAND = "${POKYBASE}/scripts/poky-git-proxy-socks-command" + + +# Uncomment this to use a shared download directory +#DL_DIR = "/some/shared/download/directory/" + |