diff options
| -rw-r--r-- | README.hardware | 22 |
1 files changed, 22 insertions, 0 deletions
diff --git a/README.hardware b/README.hardware index 025c6783fe..b2ce14661e 100644 --- a/README.hardware +++ b/README.hardware @@ -392,3 +392,25 @@ To boot the flashed kernel perform the following steps. (-e means 'elf', -d 'decompress') 2) Execute the kernel using the exec command as above. + +--- Automating the boot process --- + +After writing the kernel to flash and testing the load and exec commands +manually, you can automate the boot process with a boot script. + +1) RedBoot> fconfig + (Answer the questions not specified here as they pertain to your environment) +2) Run script at boot: true + Boot script: + .. fis load -d -e kernel + .. exec + Enter script, terminate with empty line + >> fis load -d -e kernel + >> exec -c "console=ttyS0,115200 root=/dev/sda1 rw rootdelay=2 board=UBNT-RSPRO" + >> +3) Answer the remaining questions and write the changes to flash: + Update RedBoot non-volatile configuration - continue (y/n)? y + ... Erase from 0xbfff0000-0xc0000000: . + ... Program from 0x87ff0000-0x88000000 at 0xbfff0000: . +4) Power cycle the board. + |