diff options
| -rw-r--r-- | build/conf/bblayers.conf.sample | 4 | ||||
| -rw-r--r-- | build/conf/local.conf.sample | 20 | ||||
| -rw-r--r-- | build/conf/site.conf.sample | 4 | ||||
| -rw-r--r-- | handbook/extendpoky.xml | 12 | ||||
| -rw-r--r-- | meta/classes/imagetest-qemu.bbclass | 1 | ||||
| -rw-r--r-- | meta/classes/sanity.bbclass | 6 | ||||
| -rw-r--r-- | meta/conf/layer.conf | 5 | ||||
| -rw-r--r-- | meta/packages/qemu/qemu-helper-nativesdk_1.0.bb | 12 | ||||
| -rwxr-xr-x | poky-init-build-env | 4 | ||||
| -rwxr-xr-x | scripts/poky-env-internal | 49 | ||||
| -rwxr-xr-x | scripts/pstage-scanner | 19 | ||||
| -rwxr-xr-x | scripts/qemuimage-tests/sanity/boot | 3 | ||||
| -rwxr-xr-x | scripts/qemuimage-tests/sanity/ssh | 2 | ||||
| -rwxr-xr-x | scripts/runqemu | 50 |
14 files changed, 106 insertions, 85 deletions
diff --git a/build/conf/bblayers.conf.sample b/build/conf/bblayers.conf.sample index dff44e49c4..04b7768ffa 100644 --- a/build/conf/bblayers.conf.sample +++ b/build/conf/bblayers.conf.sample @@ -4,6 +4,6 @@ LCONF_VERSION = "1" BBFILES ?= "" BBLAYERS = " \ - ${OEROOT}/meta \ - ${OEROOT}/meta-moblin \ + ##POKYBASE##/meta \ + ##POKYBASE##/meta-moblin \ " diff --git a/build/conf/local.conf.sample b/build/conf/local.conf.sample index 32bd409ecc..78c3bd144e 100644 --- a/build/conf/local.conf.sample +++ b/build/conf/local.conf.sample @@ -42,24 +42,6 @@ DISTRO ?= "poky" # For bleeding edge / experimental / unstable package versions # DISTRO ?= "poky-bleeding" -# Poky has various extra metadata collections (openmoko, extras). -# To enable these, uncomment all (or some of) the following lines: -# BBFILES = "\ -# ${OEROOT}/meta/packages/*/*.bb \ -# ${OEROOT}/meta-extras/packages/*/*.bb \ -# ${OEROOT}/meta-openmoko/packages/*/*.bb \ -# ${OEROOT}/meta-moblin/packages/*/*.bb \ -# " -# BBFILE_COLLECTIONS = "normal extras openmoko moblin" -# BBFILE_PATTERN_normal = "^${OEROOT}/meta/" -# BBFILE_PATTERN_extras = "^${OEROOT}/meta-extras/" -# BBFILE_PATTERN_openmoko = "^${OEROOT}/meta-openmoko/" -# BBFILE_PATTERN_moblin = "^${OEROOT}/meta-moblin/" -# BBFILE_PRIORITY_normal = "5" -# BBFILE_PRIORITY_extras = "5" -# BBFILE_PRIORITY_openmoko = "5" -# BBFILE_PRIORITY_moblin = "5" - BBMASK = "" # EXTRA_IMAGE_FEATURES allows extra packages to be added to the generated images @@ -109,7 +91,7 @@ PACKAGE_CLASSES ?= "package_ipk" # Note that a full build of everything in OpenEmbedded will take GigaBytes of hard # disk space, so make sure to free enough space. The default TMPDIR is # <build directory>/tmp -TMPDIR = "${OEROOT}/build/tmp" +#TMPDIR = "${POKYBASE}/build/tmp" # Uncomment this if you are using the Openedhand provided qemu deb - see README diff --git a/build/conf/site.conf.sample b/build/conf/site.conf.sample index 060dca087c..42042042f7 100644 --- a/build/conf/site.conf.sample +++ b/build/conf/site.conf.sample @@ -20,7 +20,7 @@ SCONF_VERSION = "1" # although this only works for http #GIT_PROXY_HOST = "proxy.example.com" #GIT_PROXY_PORT = "81" -#export GIT_PROXY_COMMAND = "${OEROOT}/scripts/poky-git-proxy-command" +#export GIT_PROXY_COMMAND = "${POKYBASE}/scripts/poky-git-proxy-command" # GIT_PROXY_IGNORE_* lines define hosts which do not require a proxy to access #GIT_CORE_CONFIG = "Yes" @@ -32,7 +32,7 @@ SCONF_VERSION = "1" # and then share that binary somewhere in PATH, then use the following settings #GIT_PROXY_HOST = "proxy.example.com" #GIT_PROXY_PORT = "81" -#export GIT_PROXY_COMMAND = "${OEROOT}/scripts/poky-git-proxy-socks-command" +#export GIT_PROXY_COMMAND = "${POKYBASE}/scripts/poky-git-proxy-socks-command" # Uncomment this to use a shared download directory diff --git a/handbook/extendpoky.xml b/handbook/extendpoky.xml index d03284d0e3..18edb1ac95 100644 --- a/handbook/extendpoky.xml +++ b/handbook/extendpoky.xml @@ -535,7 +535,7 @@ bitbake poky-image-sato supported and non-invasive fashion. </para> - <para> + <para> The Poky tree includes two additional layers which demonstrate this functionality, meta-moblin and meta-extras. The meta-extras repostory is not enabled by default but enabling @@ -547,12 +547,12 @@ bitbake poky-image-sato BBFILES ?= "" BBLAYERS = " \ - ${OEROOT}/meta \ - ${OEROOT}/meta-moblin \ - ${OEROOT}/meta-extras \ + /path/to/poky/meta \ + /path/to/poky/meta-moblin \ + /path/to/poky/meta-extras \ " </literallayout> - </para> + </para> <para> Bitbake parses the conf/layer.conf of each of the layers in BBLAYERS @@ -609,7 +609,7 @@ require conf/distro/include/poky-extras-src-revisions.inc git repository of the format meta-prvt-XXXX and have this repository cloned alongside the other meta directories in the Poky tree. This way you can keep your Poky tree and it's configuration entirely - inside OEROOT. + inside POKYBASE. </para> </section> diff --git a/meta/classes/imagetest-qemu.bbclass b/meta/classes/imagetest-qemu.bbclass index 742b759208..feab868476 100644 --- a/meta/classes/imagetest-qemu.bbclass +++ b/meta/classes/imagetest-qemu.bbclass @@ -47,6 +47,7 @@ python do_qemuimagetest() { os.environ["QEMUARCH"] = machine os.environ["QEMUTARGET"] = pname os.environ["DISPLAY"] = bb.data.getVar("DISPLAY", d, True) + os.environ["POKYBASE"] = bb.data.getVar("POKYBASE", d, True) """run Test Case""" bb.note("Run %s test in scenario %s" % (case, scen)) diff --git a/meta/classes/sanity.bbclass b/meta/classes/sanity.bbclass index 94e96f8524..31b8dd2b07 100644 --- a/meta/classes/sanity.bbclass +++ b/meta/classes/sanity.bbclass @@ -194,11 +194,11 @@ def check_sanity(e): f.write(current_abi) f.close() - oeroot = data.getVar('OEROOT', e.data) + oeroot = data.getVar('POKYBASE', e.data) if oeroot.find ('+') != -1: - messages = messages + "Error, you have an invalid character (+) in your OEROOT directory path. Please more Poky to a directory which doesn't include a +." + messages = messages + "Error, you have an invalid character (+) in your POKYBASE directory path. Please more Poky to a directory which doesn't include a +." elif oeroot.find (' ') != -1: - messages = messages + "Error, you have a space in your OEROOT directory path. Please move Poky to a directory which doesn't include a space." + messages = messages + "Error, you have a space in your POKYBASE directory path. Please move Poky to a directory which doesn't include a space." if messages != "": raise_sanity_error(messages) diff --git a/meta/conf/layer.conf b/meta/conf/layer.conf index d0d74884ec..30068d6aec 100644 --- a/meta/conf/layer.conf +++ b/meta/conf/layer.conf @@ -12,9 +12,12 @@ BBFILE_PRIORITY_normal = "5" # Add scripts to PATH PATH := "${PATH}:${LAYERDIR}/scripts" +# Set a variable to get to the top of the metadata location +POKYBASE := ${@os.path.normpath("${LAYERDIR}/../")} + # Set path to qemu image tests included in this layer -QEMUIMAGETESTS := "${OEROOT}/scripts/qemuimage-tests" +QEMUIMAGETESTS := "${POKYBASE}/scripts/qemuimage-tests" require conf/distro/include/poky-default-revisions.inc diff --git a/meta/packages/qemu/qemu-helper-nativesdk_1.0.bb b/meta/packages/qemu/qemu-helper-nativesdk_1.0.bb index 5d8e45f123..a4294ef5cf 100644 --- a/meta/packages/qemu/qemu-helper-nativesdk_1.0.bb +++ b/meta/packages/qemu/qemu-helper-nativesdk_1.0.bb @@ -5,11 +5,11 @@ PR = "r7" FILESPATH = "${FILE_DIRNAME}/qemu-helper" -SRC_URI = "file://${OEROOT}/scripts/poky-qemu \ - file://${OEROOT}/scripts/poky-qemu-internal \ - file://${OEROOT}/scripts/poky-addptable2image \ - file://${OEROOT}/scripts/poky-qemu-ifup \ - file://${OEROOT}/scripts/poky-qemu-ifdown \ +SRC_URI = "file://${POKYBASE}/scripts/poky-qemu \ + file://${POKYBASE}/scripts/poky-qemu-internal \ + file://${POKYBASE}/scripts/poky-addptable2image \ + file://${POKYBASE}/scripts/poky-qemu-ifup \ + file://${POKYBASE}/scripts/poky-qemu-ifdown \ file://raw2flash.c" S = "${WORKDIR}" @@ -23,7 +23,7 @@ do_compile() { do_install() { install -d ${D}${bindir} - install -m 0755 ${WORKDIR}${OEROOT}/scripts/poky-* ${D}${bindir}/ + install -m 0755 ${WORKDIR}${POKYBASE}/scripts/poky-* ${D}${bindir}/ install raw2flash.spitz ${D}${bindir}/ install flash2raw.spitz ${D}${bindir}/ ln -fs raw2flash.spitz ${D}${bindir}/raw2flash.akita diff --git a/poky-init-build-env b/poky-init-build-env index 94bf3f0f7f..0f5e684a52 100755 --- a/poky-init-build-env +++ b/poky-init-build-env @@ -21,7 +21,9 @@ if test x"$0" = x"./poky-init-build-env"; then echo "Error: Run via '. ./poky-init-build-env'" +elif test x"$BASH_SOURCE" = x; then + echo "Error: you are not running a Bash shell, please use Bash or add support for your shell to the init scripts" else - . ./scripts/poky-env-internal + . `dirname $BASH_SOURCE`/scripts/poky-env-internal fi diff --git a/scripts/poky-env-internal b/scripts/poky-env-internal index 54b6ee8964..862ce7aec2 100755 --- a/scripts/poky-env-internal +++ b/scripts/poky-env-internal @@ -19,19 +19,30 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -# Change this to the location of this file. -# Also update the locations at the top of conf/local.conf +# scripts/ is a sub-directory of OEROOT, we use readlink to get the full path +SCRIPTPATH=`readlink -f "$BASH_SOURCE"` +OEROOT="`dirname $SCRIPTPATH`/../" -OEROOT=`pwd` if [ "x$BDIR" = "x" ]; then - if [ "x$1" = "x" ]; then - BDIR="build" - else - BDIR="$1" - fi + if [ "x$1" = "x" ]; then + BDIR="build" + else + BDIR=`readlink -f "$1"` + fi +fi +if [[ "$BDIR" = /* ]] ; then + BUILDDIR="$BDIR" +else + BUILDDIR="`pwd`/$BDIR" fi -BUILDDIR="$OEROOT/$BDIR/" unset BDIR + +mkdir -p $BUILDDIR/conf +if ! (test -w "$BUILDDIR"); then + echo >&2 "Error: Cannot write to $BUILDDIR, perhaps try sourcing with a writable path? i.e. . poky-init-build-env ~/my-build" + return +fi + BITBAKEDIR="$OEROOT/bitbake$BBEXTRA/" PKGDIR="$OEROOT/meta/" BBPATH="$BITBAKEDIR $PKGDIR" @@ -51,9 +62,8 @@ do continue fi if [ -e $OEROOT/$repo/poky-extra-environment ]; then - . $OEROOT/$repo/poky-extra-environment + . $OEROOT/$repo/poky-extra-environment fi - BBPATH=" $BBPATH $OEROOT/$repo" done BBPATH="$BBPATH $HOME/.oe $HOME/.poky $BUILDDIR" @@ -78,12 +88,13 @@ BUILD_SYS="$BUILD_ARCH-$BUILD_OS" PATH="$BITBAKEDIR/bin/:$OEROOT/scripts:$PATH" -cd "$BUILDDIR" - # Remove any symlinks from paths BITBAKEDIR=`readlink -f "$BITBAKEDIR"` PKGDIR=`readlink -f "$PKGDIR"` BUILDDIR=`readlink -f "$BUILDDIR"` +OEROOT=`readlink -f "$OEROOT"` + +cd "$BUILDDIR" if ! (test -d "$BITBAKEDIR" && test -d "$PKGDIR" && test -d "$BUILDDIR"); then echo >&2 "Error: Not all directories exist! Did you run this script in poky directory?" @@ -91,7 +102,7 @@ if ! (test -d "$BITBAKEDIR" && test -d "$PKGDIR" && test -d "$BUILDDIR"); then fi if [ "x" = "x$POKYLOCALCONF" ]; then - POKYLOCALCONF="$BUILDDIR/conf/local.conf.sample" + POKYLOCALCONF="$OEROOT/build/conf/local.conf.sample" fi if ! (test -r "$BUILDDIR/conf/local.conf"); then echo "You had no conf/local.conf file. Poky has created this configuration file for you" @@ -105,17 +116,19 @@ if ! (test -r "$BUILDDIR/conf/local.conf"); then fi if [ "x" = "x$POKYLAYERCONF" ]; then - POKYLAYERCONF="$BUILDDIR/conf/bblayers.conf.sample" + POKYLAYERCONF="$OEROOT/build/conf/bblayers.conf.sample" fi if ! (test -r "$BUILDDIR/conf/bblayers.conf"); then - cp -f $POKYLAYERCONF $BUILDDIR/conf/bblayers.conf + # Put the abosolute path to the layers in bblayers.conf so we can run + # bitbake without the init script after the first run + sed "s|##POKYBASE##|$OEROOT|g" $POKYLAYERCONF > $BUILDDIR/conf/bblayers.conf fi # Prevent disturbing a new GIT clone in same console unset POKYLOCALCONF unset POKYLAYERCONF -export BBPATH OEROOT BUILD_SYS BUILDDIR +export BBPATH BUILD_SYS BUILDDIR # Kill off the TERMINFO variable, as glibc will grab its contents in its 'make # install' if set @@ -141,4 +154,4 @@ echo "Common targets are poky-image-minimal, poky-image-sato, meta-toolchain or echo echo "You can also run generated qemu images with a command like 'runqemu qemux86'" -export BB_ENV_EXTRAWHITE="MACHINE DISTRO POKYMODE POKYLIBC OEROOT http_proxy ftp_proxy SSH_AGENT_PID SSH_AUTH_SOCK BB_SRCREV_POLICY SDKMACHINE BB_NUMBER_THREADS" +export BB_ENV_EXTRAWHITE="MACHINE DISTRO POKYMODE POKYLIBC http_proxy ftp_proxy SSH_AGENT_PID SSH_AUTH_SOCK BB_SRCREV_POLICY SDKMACHINE BB_NUMBER_THREADS" diff --git a/scripts/pstage-scanner b/scripts/pstage-scanner index 9234912581..4a27aa5d26 100755 --- a/scripts/pstage-scanner +++ b/scripts/pstage-scanner @@ -1,7 +1,7 @@ #!/usr/bin/env python ## -## This script will scan all of the packages in ${OEROOT}/pstage (or argv[1]) +## This script will scan all of the packages in PSTAGE_DIR (or argv[1]) ## in search of packages which install files outside of their native sysroot ## @@ -16,15 +16,24 @@ def main(): """Generate a list of pstage packages and scan them for badness""" package_list = [] - ## First we walk the pstage directory, let's assume we're running from - ## a sibling of pstage (i.e. scripts) if no path defined try: path = sysv.arg[1] except: - path = os.path.join(os.environ.get("OEROOT"), "pstage") + # Assume pstage is a child of tmp, Poky's default + tmpdir = None + sub.Popen(["bitbake", "-e"], stdout=sub.PIPE,stderr=sub.PIPE) + err, out = p.communicate() + if (!out): + print("bitbake not in your environment, try pstage-scanner /some/path/to/pstage") + exit + for line in out: + if line.find("PSTAGE_DIR=") != -1: + tmpdir = line.partition("=")[2].strip("\"") + break if len(path) < 1 or not os.path.exists(path): - path = os.path.join(os.environ.get("OEROOT"), "pstage") + print ("No path defined and bitbake not in your environment, try pstage-scanner /some/path/to/pstage") + exit global logf try: diff --git a/scripts/qemuimage-tests/sanity/boot b/scripts/qemuimage-tests/sanity/boot index b4c0094f25..57b204b170 100755 --- a/scripts/qemuimage-tests/sanity/boot +++ b/scripts/qemuimage-tests/sanity/boot @@ -9,8 +9,7 @@ # This file is licensed under the GNU General Public License, # Version 2. # - -. $OEROOT/scripts/qemuimage-testlib +. $POKYBASE/scripts/qemuimage-testlib TIMEOUT=120 QEMU_IPADDR="192.168.7.2" diff --git a/scripts/qemuimage-tests/sanity/ssh b/scripts/qemuimage-tests/sanity/ssh index 7dd895951c..3c7638cc2e 100755 --- a/scripts/qemuimage-tests/sanity/ssh +++ b/scripts/qemuimage-tests/sanity/ssh @@ -9,7 +9,7 @@ # Version 2. # -. $OEROOT/scripts/qemuimage-testlib +. $POKYBASE/scripts/qemuimage-testlib TIMEOUT=360 QEMU_IPADDR="192.168.7.2" diff --git a/scripts/runqemu b/scripts/runqemu index c7c51ec77a..bb26f8b633 100755 --- a/scripts/runqemu +++ b/scripts/runqemu @@ -19,11 +19,23 @@ if [ "x$BUILDDIR" = "x" ]; then - echo "You need to source poky-init-build-env before running this script" - exit 1 + # BUILDDIR unset, try and get TMPDIR from bitbake + type -P bitbake &>/dev/null || { + echo "You either need bitbake in your PATH or to source poky-init-build-env before running this script" >&2; exit 1; } + + # we have bitbake in PATH, get TMPDIR from the environment + TMPDIR=`bitbake -e | grep TMPDIR=\" | cut -d '=' -f2 | cut -d '"' -f2` +else + TMPDIR=$BUILDDIR/tmp +fi + +if ! (test -d "$TMPDIR"); then + echo >&2 "Error: no $TMPDIR directory, please re-run the script from the Poky build directory." + return fi -INTERNAL_SCRIPT=`which poky-qemu-internal` +SCRIPTSDIR=`dirname "$0"` +INTERNAL_SCRIPT=SCRIPTSDIR/poky-qemu-internal` if [ "x$1" = "x" ]; then echo @@ -67,9 +79,9 @@ fi if [ "$MACHINE" = "qemuarm" -o "$MACHINE" = "spitz" -o "$MACHINE" = "borzoi" -o "$MACHINE" = "akita" -o "$MACHINE" = "nokia800" ]; then if [ "x$ZIMAGE" = "x" ]; then - ZIMAGE=$BUILDDIR/tmp/deploy/images/zImage-$MACHINE.bin + ZIMAGE=$TMPDIR/deploy/images/zImage-$MACHINE.bin fi - CROSSPATH=$BUILDDIR/sysroots/$BUILD_SYS/arm-poky-linux-gnueabi/bin + CROSSPATH=$TMPDIR/sysroots/$BUILD_SYS/arm-poky-linux-gnueabi/bin fi function findimage { @@ -96,7 +108,7 @@ function findimage { if [ "$MACHINE" = "qemuarm" ]; then if [ "$TYPE" = "ext3" ]; then if [ "x$HDIMAGE" = "x" ]; then - T=$BUILDDIR/tmp/deploy/images + T=$TMPDIR/deploy/images findimage $T qemuarm ext3 "poky-image-sdk poky-image-sato poky-image-minimal" fi fi @@ -104,34 +116,34 @@ fi if [ "$MACHINE" = "qemumips" ]; then if [ "x$ZIMAGE" = "x" ]; then - ZIMAGE=$BUILDDIR/tmp/deploy/images/vmlinux-$MACHINE.bin + ZIMAGE=$TMPDIR/tmp/deploy/images/vmlinux-$MACHINE.bin fi if [ "$TYPE" = "ext3" ]; then if [ "x$HDIMAGE" = "x" ]; then - T=$BUILDDIR/tmp/deploy/images + T=$TMPDIR/tmp/deploy/images findimage $T $MACHINE ext3 "poky-image-sdk poky-image-sato poky-image-minimal" fi fi - CROSSPATH=$BUILDDIR/tmp/sysroots/$BUILD_SYS/usr + CROSSPATH=$TMPDIR/tmp/sysroots/$BUILD_SYS/usr fi if [ "$MACHINE" = "qemuppc" ]; then if [ "x$ZIMAGE" = "x" ]; then - ZIMAGE=$BUILDDIR/tmp/deploy/images/zImage-$MACHINE.bin + ZIMAGE=$TMPDIR/tmp/deploy/images/zImage-$MACHINE.bin fi if [ "$TYPE" = "ext3" ]; then if [ "x$HDIMAGE" = "x" ]; then - T=$BUILDDIR/tmp/deploy/images + T=$TMPDIR/tmp/deploy/images findimage $T $MACHINE ext3 "poky-image-sdk poky-image-sato poky-image-minimal" fi fi - CROSSPATH=$BUILDDIR/tmp/sysroots/$BUILD_SYS/usr + CROSSPATH=$TMPDIR/tmp/sysroots/$BUILD_SYS/usr fi if [ "$MACHINE" = "spitz" ]; then if [ "$TYPE" = "ext3" ]; then if [ "x$HDIMAGE" = "x" ]; then - HDIMAGE=$BUILDDIR/tmp/deploy/images/poky-image-sato-spitz.ext3 + HDIMAGE=$TMPDIR/tmp/deploy/images/poky-image-sato-spitz.ext3 fi fi fi @@ -139,7 +151,7 @@ fi if [ "$MACHINE" = "akita" ]; then if [ "$TYPE" = "jffs2" ]; then if [ "x$HDIMAGE" = "x" ]; then - HDIMAGE=$BUILDDIR/tmp/deploy/images/poky-image-sato-akita.jffs2 + HDIMAGE=$TMPDIR/tmp/deploy/images/poky-image-sato-akita.jffs2 fi fi fi @@ -147,7 +159,7 @@ fi if [ "$MACHINE" = "nokia800" ]; then if [ "$TYPE" = "jffs2" ]; then if [ "x$HDIMAGE" = "x" ]; then - HDIMAGE=$BUILDDIR/tmp/deploy/images/poky-image-sato-nokia800.jffs2 + HDIMAGE=$TMPDIR/tmp/deploy/images/poky-image-sato-nokia800.jffs2 fi fi fi @@ -155,15 +167,15 @@ fi if [ "$MACHINE" = "qemux86" ]; then if [ "x$ZIMAGE" = "x" ]; then - ZIMAGE=$BUILDDIR/tmp/deploy/images/bzImage-$MACHINE.bin + ZIMAGE=$TMPDIR/tmp/deploy/images/bzImage-$MACHINE.bin fi if [ "$TYPE" = "ext3" ]; then if [ "x$HDIMAGE" = "x" ]; then - T=$BUILDDIR/tmp/deploy/images + T=$TMPDIR/tmp/deploy/images findimage $T qemux86 ext3 "moblin-image-sdk moblin-image-netbook poky-image-sdk poky-image-sato poky-image-minimal" fi fi - CROSSPATH=$BUILDDIR/tmp/sysroots/$BUILD_SYS/usr + CROSSPATH=$TMPDIR/tmp/sysroots/$BUILD_SYS/usr fi if [ "$MACHINE" = "qemuarm" -o "$MACHINE" = "spitz" -o "$MACHINE" = "borzoi" -o "$MACHINE" = "akita" -o "$MACHINE" = "nokia800" ]; then @@ -182,6 +194,6 @@ if [ ! -e $CROSSPATH/$TARGET_SYS/bin/gcc ]; then ln -s $CROSSPATH/bin/$TARGET_SYS-gcc $CROSSPATH/$TARGET_SYS/bin/gcc fi -CROSSPATH=$BUILDDIR/tmp/sysroots/$BUILD_SYS/usr/bin:$CROSSPATH:$BUILDDIR/tmp/cross/bin +CROSSPATH=$TMPDIR/tmp/sysroots/$BUILD_SYS/usr/bin:$CROSSPATH:$TMPDIR/tmp/cross/bin . $INTERNAL_SCRIPT |