diff options
| -rw-r--r-- | handbook/usingpoky.xml | 86 |
1 files changed, 0 insertions, 86 deletions
diff --git a/handbook/usingpoky.xml b/handbook/usingpoky.xml index 50816c9273..ad6bda2545 100644 --- a/handbook/usingpoky.xml +++ b/handbook/usingpoky.xml @@ -159,92 +159,6 @@ $ bitbake qemu-native board/machine documentation for information about how to install these images. </para> - <section id='usingpoky-install-usbnetworking'> - <title>USB Networking</title> - - <para> - Devices commonly have USB connectivity. To connect to the usbnet interface, on - the host machine run: - </para> - <para> - <programlisting> -modprobe usbnet -ifconfig usb0 192.168.0.200 -route add 192.168.0.202 usb0 -</programlisting> - </para> - </section> - - <section id='usingpoky-install-qemu-networking'> - <title>QEMU/USB networking with IP masquerading</title> - - <para> - On Ubuntu, Debian or similar distributions you can have the network automatically - configured. You can also enable masquerading between the QEMU system and the rest - of your network. To do this you need to edit <filename>/etc/network/interfaces</filename> to include: - </para> - - <para><programlisting> -allow-hotplug tap0 -iface tap0 inet static - address 192.168.7.200 - netmask 255.255.255.0 - network 192.168.7.0 - post-up iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.7.0/24 - post-up echo 1 > /proc/sys/net/ipv4/ip_forward - post-up iptables -P FORWARD ACCEPT -</programlisting> - </para> - - <para> - This ensures the tap0 interface will be up everytime you run QEMU - and it will have network/internet access. - </para> - - <para> - Under emulation there are two steps to configure for internet access - via tap0. The first step is to configure routing: - </para> - - <para><programlisting> -route add default gw 192.168.7.200 tap0 -</programlisting> - </para> - - <para> - The second is to configure name resolution which is configured in the - <filename>/etc/resolv.conf</filename> file. The simplest solution is - to copy its content from the host machine. - </para> - - <para> - USB connections to devices can be set up and automated in a similar way. - First add the following to - <filename>/etc/network/interfaces</filename>: - </para> - - <para><programlisting> -allow-hotplug usb0 -iface usb0 inet static - address 192.168.0.200 - netmask 255.255.255.0 - network 192.168.0.0 - post-up iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24 - post-up echo 1 > /proc/sys/net/ipv4/ip_forward - post-up iptables -P FORWARD ACCEPT -</programlisting> - </para> - - <para> - and then to configure routing on the device you would use: - </para> - - <para><programlisting> -route add default gw 192.168.0.202 usb0 -</programlisting> - </para> - - </section> </section> <section id='usingpoky-debugging'> |