Update git3 kernel to have working alsa support for both c7x0 and cxx00 :)

git-svn-id: https://svn.o-hand.com/repos/poky@157 311d38ba-8fff-0310-9ca6-ca027cbcb966

4 files changed, 231 insertions, 37 deletions

diff --git a/openembedded/packages/linux/linux-openzaurus-2.6.14-git3/defconfig-c7x0 b/openembedded/packages/linux/linux-openzaurus-2.6.14-git3/defconfig-c7x0
index 3e6df05f20..15aaa98910 100644
--- a/openembedded/packages/linux/linux-openzaurus-2.6.14-git3/defconfig-c7x0
+++ b/openembedded/packages/linux/linux-openzaurus-2.6.14-git3/defconfig-c7x0
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 13 14:55:00 2005
+# Linux kernel version: 2.6.14-git3
+# Wed Nov  2 15:14:36 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -158,6 +158,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -165,7 +166,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2    debug"
 # CONFIG_XIP_KERNEL is not set
 
 #
@@ -175,7 +176,9 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_DEBUG=y
 CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
@@ -450,7 +453,6 @@ CONFIG_BT_HCIUSB=m
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_BCSP_TXCRC=y
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -578,6 +580,11 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -813,6 +820,7 @@ CONFIG_TOUCHSCREEN_CORGI=y
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
 
@@ -875,6 +883,7 @@ CONFIG_SA1100_RTC=y
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -909,6 +918,8 @@ CONFIG_I2C_PXA=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_MAX7310 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -1001,11 +1012,9 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_ELPP is not set
 # CONFIG_FB_PXA is not set
 CONFIG_FB_W100=y
 # CONFIG_FB_S1D13XXX is not set
@@ -1017,6 +1026,7 @@ CONFIG_FB_W100=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -1079,6 +1089,15 @@ CONFIG_SND_PXA2XX_PCM=m
 CONFIG_SND_PXA2XX_AC97=m
 
 #
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# PCMCIA devices
+#
+
+#
 # SoC audio support
 #
 CONFIG_SND_SOC=m
@@ -1092,12 +1111,18 @@ CONFIG_SND_PXA2xx_SOC_I2S=m
 # CONFIG_SND_PXA2xx_SOC_SSP is not set
 
 #
+# PXA2xx machine support
+#
+# CONFIG_SND_PXA2xx_SOC_MAINSTONE is not set
+CONFIG_SND_PXA2xx_SOC_CORGI=m
+
+#
 # Soc Codecs
 #
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_WM8753 is not set
 CONFIG_SND_SOC_WM8731=m
 # CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM9713_VOICE is not set
 
 #
 # Open Sound System
@@ -1164,15 +1189,15 @@ CONFIG_USB_SL811_CS=m
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
 
 #
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1293,6 +1318,7 @@ CONFIG_USB_SERIAL_KEYSPAN=m
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
@@ -1543,7 +1569,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_USER is not set
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
diff --git a/openembedded/packages/linux/linux-openzaurus-2.6.14-git3/defconfig-cxx00 b/openembedded/packages/linux/linux-openzaurus-2.6.14-git3/defconfig-cxx00
index bae7042808..9665ac548e 100644
--- a/openembedded/packages/linux/linux-openzaurus-2.6.14-git3/defconfig-cxx00
+++ b/openembedded/packages/linux/linux-openzaurus-2.6.14-git3/defconfig-cxx00
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Mon Oct 17 23:25:42 2005
+# Linux kernel version: 2.6.14-git3
+# Wed Nov  2 10:36:59 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -157,6 +157,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -164,7 +165,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/hda1 rootfstype=ext3 rw   debug"
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/hda1 rootfstype=ext3 rw   fbcon=rotate:1 debug"
 # CONFIG_XIP_KERNEL is not set
 
 #
@@ -439,7 +440,6 @@ CONFIG_BT_HCIUSB=m
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_BCSP_TXCRC=y
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -567,6 +567,11 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -802,6 +807,7 @@ CONFIG_TOUCHSCREEN_CORGI=y
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
 
@@ -864,6 +870,7 @@ CONFIG_SA1100_RTC=y
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -898,6 +905,7 @@ CONFIG_I2C_PXA=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 CONFIG_MAX7310=y
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -973,11 +981,9 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_ELPP is not set
 CONFIG_FB_PXA=y
 # CONFIG_FB_W100 is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
@@ -1076,12 +1082,18 @@ CONFIG_SND_PXA2xx_SOC_I2S=m
 # CONFIG_SND_PXA2xx_SOC_SSP is not set
 
 #
+# PXA2xx machine support
+#
+# CONFIG_SND_PXA2xx_SOC_MAINSTONE is not set
+CONFIG_SND_PXA2xx_SOC_CORGI=m
+
+#
 # Soc Codecs
 #
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_WM8753 is not set
 # CONFIG_SND_SOC_WM8731 is not set
 CONFIG_SND_SOC_WM8750=m
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM9713_VOICE is not set
 
 #
 # Open Sound System
@@ -1119,15 +1131,15 @@ CONFIG_USB_SL811_CS=m
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
 
 #
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1243,6 +1255,7 @@ CONFIG_USB_SERIAL_KEYSPAN=m
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
@@ -1498,7 +1511,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_USER is not set
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
diff --git a/openembedded/packages/linux/linux-openzaurus-2.6.14-git3/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch b/openembedded/packages/linux/linux-openzaurus-2.6.14-git3/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
new file mode 100644
index 0000000000..18bf4268fc
--- /dev/null
+++ b/openembedded/packages/linux/linux-openzaurus-2.6.14-git3/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
@@ -0,0 +1,155 @@
+
+From: Petr Vandrovec <vandrove@vc.cvut.cz>
+
+Patch below adds support for using different prescaler than 16 for 16c950
+chips.  This is needed for using Fujitsu-Siemens Connect2Air compact-flash
+card, which comes (apparently) with 806kHz clocks, and so you have to
+program prescaler for division by 7, and DLAB to 1, to get 115200Bd.  
+
+To get card properly running you also have to add lines below to
+/etc/pcmcia/serial.opts so kernel knows that base speed is not 115200 but
+50400 (50400 * 16 = 806400; 806400 / 7 = 115200).  As I've found no code
+specifying baud_rate in serial_cs, I assume that specifying it in
+serial.opts is right way to do this type of things.
+
+Patch also fixes problem that for UPF_MAGIC_MULTIPLIER maximum possible
+baud rate passed to uart code was uartclk / 16 while correct value for
+these devices (and for 16c950) is uartclk / 4.
+
+Patch also fixes problem that for UPF_MAGIC_MULTIPLIER devices with
+baud_rate 19200 or 9600 spd_cust did not work correctly.  Not that such
+devices exist, but we should not ignore spd_cust, user probably knows why
+he asked for spd_cust.
+
+serial.opts:
+
+case "$MANFID-$FUNCID-$PRODID_1-$PRODID_2-$PRODID_3-$PRODID_4" in
+'0279,950b-2-GPRS Modem---')
+    SERIAL_OPTS="baud_base 50400"
+    ;;
+esac
+
+Cc: David Woodhouse <dwmw2@infradead.org>
+Signed-off-by: Andrew Morton <akpm@osdl.org>
+---
+
+ drivers/serial/8250.c |   82 +++++++++++++++++++++++++++++++++++++++-----------
+ 1 files changed, 64 insertions(+), 18 deletions(-)
+
+diff -puN drivers/serial/8250.c~serial-add-support-for-non-standard-xtals-to-16c950-driver drivers/serial/8250.c
+--- devel/drivers/serial/8250.c~serial-add-support-for-non-standard-xtals-to-16c950-driver	2005-09-12 03:34:57.000000000 -0700
++++ devel-akpm/drivers/serial/8250.c	2005-09-12 03:34:57.000000000 -0700
+@@ -1653,24 +1653,58 @@ static void serial8250_shutdown(struct u
+ 		serial_unlink_irq_chain(up);
+ }
+ 
+-static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
++static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud,
++					   unsigned int *prescaler)
+ {
+-	unsigned int quot;
+-
+-	/*
+-	 * Handle magic divisors for baud rates above baud_base on
+-	 * SMSC SuperIO chips.
++        /*
++	 * Use special handling only if user did not supply its own divider.
++	 * spd_cust is defined in terms of baud_base, so always use default
++	 * prescaler when spd_cust is requested.
+ 	 */
+-	if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+-	    baud == (port->uartclk/4))
+-		quot = 0x8001;
+-	else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+-		 baud == (port->uartclk/8))
+-		quot = 0x8002;
+-	else
+-		quot = uart_get_divisor(port, baud);
+ 
+-	return quot;
++	*prescaler = 16;
++        if (baud != 38400 || (port->flags & UPF_SPD_MASK) != UPF_SPD_CUST) {
++		unsigned int quot = port->uartclk / baud;
++
++		/*
++		 * Handle magic divisors for baud rates above baud_base on
++		 * SMSC SuperIO chips.
++		 */
++		if (port->flags & UPF_MAGIC_MULTIPLIER) {
++			if (quot == 4) {
++				return 0x8001;
++			} else if (quot == 8) {
++				return 0x8002;
++			}
++		}
++		if (port->type == PORT_16C950) {
++			/*
++			 * This computes TCR value (4 to 16), not CPR value (which can
++			 * be between 1.000 and 31.875) - chip I have uses XTAL of
++			 * 806400Hz, and so a division by 7 is required to get 115200Bd.
++			 * I'm leaving CPR disabled for now, until someone will
++			 * hit even more exotic XTAL (it is needed to get 500kbps
++			 * or 1000kbps from 18.432MHz XTAL, but I have no device
++			 * which would benefit from doing that).
++			 *
++			 * If we can use divide by 16, use it.  Otherwise look for
++			 * better prescaler, from 15 to 4.  If quotient cannot
++			 * be divided by any integer value between 4 and 15, use 4.
++			 */
++			if (quot & 0x0F) {
++				unsigned int div;
++
++				for (div = 15; div > 4; div--) {
++					if (quot % div == 0) {
++						break;
++					}
++				}
++				*prescaler = div;
++				return quot / div;
++			}
++		}
++	}
++	return uart_get_divisor(port, baud);
+ }
+ 
+ static void
+@@ -1680,7 +1714,7 @@ serial8250_set_termios(struct uart_port 
+ 	struct uart_8250_port *up = (struct uart_8250_port *)port;
+ 	unsigned char cval, fcr = 0;
+ 	unsigned long flags;
+-	unsigned int baud, quot;
++	unsigned int baud, quot, prescaler;
+ 
+ 	switch (termios->c_cflag & CSIZE) {
+ 	case CS5:
+@@ -1712,8 +1746,13 @@ serial8250_set_termios(struct uart_port 
+ 	/*
+ 	 * Ask the core to calculate the divisor for us.
+ 	 */
+-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
+-	quot = serial8250_get_divisor(port, baud);
++
++	if (port->type == PORT_16C950 || (port->flags & UPF_MAGIC_MULTIPLIER)) {
++		baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4);
++	} else {
++		baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
++	}
++	quot = serial8250_get_divisor(port, baud, &prescaler);
+ 
+ 	/*
+ 	 * Oxford Semi 952 rev B workaround
+@@ -1817,6 +1856,13 @@ serial8250_set_termios(struct uart_port 
+ 	serial_outp(up, UART_DLM, quot >> 8);		/* MS of divisor */
+ 
+ 	/*
++	 * Program prescaler for 16C950 chips.
++	 */
++	if (up->port.type == PORT_16C950) {
++		serial_icr_write(up, UART_TCR, prescaler == 16 ? 0 : prescaler);
++	}
++
++	/*
+ 	 * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
+ 	 * is written without DLAB set, this mode will be disabled.
+ 	 */
+_
diff --git a/openembedded/packages/linux/linux-openzaurus_2.6.14-git3.bb b/openembedded/packages/linux/linux-openzaurus_2.6.14-git3.bb
index 0357e45c43..5a25c01213 100644
--- a/openembedded/packages/linux/linux-openzaurus_2.6.14-git3.bb
+++ b/openembedded/packages/linux/linux-openzaurus_2.6.14-git3.bb
@@ -1,6 +1,6 @@
 include linux-openzaurus.inc
 
-PR = "r4"
+PR = "r2"
 
 DEFAULT_PREFERENCE = "+1"
 
@@ -12,21 +12,15 @@ DEFAULT_PREFERENCE = "+1"
 # ftp://ftp.kernel.org/pub/linux/kernel/v2.6/testing/patch-2.6.14-rc4.bz2;patch=1 \
 # ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc2/2.6.14-rc2-mm1/2.6.14-rc2-mm1.bz2;patch=1 \	   
 
-#           ${RPSRC}/corgi_irda-r4.patch;patch=1 \
-#           ${RPSRC}/poodle_irda-r0.patch;patch=1 \
-#           ${RPSRC}/spitz_irda-r0.patch;patch=1 \
-#           ${RPSRC}/pxa_irda_susres-r0.patch;patch=1 \	   
-
-
-
 # Patches submitted upstream are towards top of this list 
 # Hacks should clearly named and at the bottom
 SRC_URI = "ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.14.tar.gz \
            http://www.kernel.org/pub/linux/kernel/v2.6/snapshots/patch-2.6.14-git3.bz2;patch=1 \
            ${RPSRC}/pxa_pmops_static-r1.patch;patch=1 \
-           ${RPSRC}/pxa_i2c_fixes-r2.patch;patch=1 \
+           ${RPSRC}/pxa_i2c_fixes-r3.patch;patch=1 \
            ${RPSRC}/pxa_ohci_platform-r2.patch;patch=1 \
            ${RPSRC}/pxa_ohci_suspend-r2.patch;patch=1 \
+           ${RPSRC}/revert_bootmem-r1.patch;patch=1 \
            ${RPSRC}/ide_not_removable-r0.patch;patch=1 \
            ${RPSRC}/sharpsl_pm-r10.patch;patch=1 \
            ${RPSRC}/corgi_pm-r4.patch;patch=1 \
@@ -40,9 +34,11 @@ SRC_URI = "ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.14.tar.gz \
            ${RPSRC}/input_power-r2.patch;patch=1 \
            ${RPSRC}/jffs2_longfilename-r0.patch;patch=1 \
            ${RPSRC}/sharpsl_bl_kick-r1.patch;patch=1 \
-           ${RPSRC}/corgi_snd-r11.patch;patch=1 \
+           ${RPSRC}/corgi_snd-r14.patch;patch=1 \
            ${RPSRC}/export_scoop-r0.patch;patch=1 \
            ${RPSRC}/pxa25x_cpufreq-r0.patch;patch=1 \
+           ${RPSRC}/alsa/alsa_soc-r0.patch;patch=1 \
+           ${RPSRC}/alsa/ssp_pxa_regs-r0.patch;patch=1 \
            ${RPSRC}/fbdev/fbdev-r0.patch;patch=1 \
            ${RPSRC}/fbdev/fbdev1-r0.patch;patch=1 \
            ${RPSRC}/fbdev/fbdev2-r0.patch;patch=1 \
@@ -68,13 +64,13 @@ SRC_URI = "ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.14.tar.gz \
            ${RPSRC}/pcmcia_dev_ids-r2.patch;patch=1 \
            ${RPSRC}/mmc_timeout-r0.patch;patch=1 \	   
            ${RPSRC}/pxa_cf_initorder_hack-r1.patch;patch=1 \
-           ${RPSRC}/alsa/alsa_soc-r3.patch;patch=1 \
-           ${RPSRC}/alsa/alsa_soc-r3_1.patch;patch=1 \
-           ${RPSRC}/wm8731-r6.patch;patch=1 \
+           ${RPSRC}/alsa/alsa_soc_0.5-r0.patch;patch=1 \
+           ${RPSRC}/alsa_snd_corgi-r0.patch;patch=1 \
            file://add-oz-release-string.patch;patch=1 \
            file://pxa-serial-hack.patch;patch=1 \
            ${RPSRC}/jl1/pxa-linking-bug.patch;patch=1 \
            file://dtl1_cs-add-socket-revE.patch;patch=1 \
+           file://serial-add-support-for-non-standard-xtals-to-16c950-driver.patch;patch=1 \
            file://connectplus-remove-ide-HACK.patch;patch=1 \
            file://defconfig-c7x0 \
            file://defconfig-ipaq-pxa270 \