PPP: add default configuration file and fix hard-coded CFLAGS

1. Add three ppp configuration files, make "/etc/init.d/ppp start"
be able to work with little change. provider and pap are adopted from
Ubuntu. ppp_on_boot is adopted from http://www.wlug.org.nz.
2. Use build system CFLAGS when compiling

Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>

4 files changed, 99 insertions, 0 deletions

diff --git a/meta/recipes-connectivity/ppp/ppp-2.4.5/copts.patch b/meta/recipes-connectivity/ppp/ppp-2.4.5/copts.patch
new file mode 100644
index 0000000000..53ff06e03e
--- /dev/null
+++ b/meta/recipes-connectivity/ppp/ppp-2.4.5/copts.patch
@@ -0,0 +1,21 @@
+ppp: use build system CFLAGS when compiling
+
+Upstream-Status: Pending
+
+Override the hard-coded COPTS make variables with
+CFLAGS.  Add COPTS into one Makefile that did not
+use it.
+
+Signed-off-by: Joe Slater <jslater@windriver.com>
+
+--- a/pppd/plugins/radius/Makefile.linux
++++ b/pppd/plugins/radius/Makefile.linux
+@@ -12,7 +12,7 @@ VERSION = $(shell awk -F '"' '/VERSION/ 
+ INSTALL	= install
+ 
+ PLUGIN=radius.so radattr.so radrealms.so
+-CFLAGS=-I. -I../.. -I../../../include -O2 -fPIC -DRC_LOG_FACILITY=LOG_DAEMON
++CFLAGS=-I. -I../.. -I../../../include $(COPTS) -fPIC -DRC_LOG_FACILITY=LOG_DAEMON
+ 
+ # Uncomment the next line to include support for Microsoft's
+ # MS-CHAP authentication protocol.
diff --git a/meta/recipes-connectivity/ppp/ppp-2.4.5/pap b/meta/recipes-connectivity/ppp/ppp-2.4.5/pap
new file mode 100644
index 0000000000..093c32607a
--- /dev/null
+++ b/meta/recipes-connectivity/ppp/ppp-2.4.5/pap
@@ -0,0 +1,22 @@
+# You can use this script unmodified to connect to sites which allow
+# authentication via PAP, CHAP and similar protocols.
+# This script can be shared among different pppd peer configurations.
+# To use it, add something like this to your /etc/ppp/peers/ file:
+#
+# connect "/usr/sbin/chat -v -f /etc/chatscripts/pap -T PHONE-NUMBER"
+# user YOUR-USERNAME-IN-PAP-SECRETS
+# noauth
+
+# Uncomment the following line to see the connect speed.
+# It will be logged to stderr or to the file specified with the -r chat option.
+#REPORT		CONNECT
+
+ABORT		BUSY
+ABORT		VOICE
+ABORT		"NO CARRIER"
+ABORT		"NO DIALTONE"
+ABORT		"NO DIAL TONE"
+""		ATZ
+OK		ATDT\T
+CONNECT		""
+
diff --git a/meta/recipes-connectivity/ppp/ppp-2.4.5/ppp_on_boot b/meta/recipes-connectivity/ppp/ppp-2.4.5/ppp_on_boot
new file mode 100644
index 0000000000..9793761840
--- /dev/null
+++ b/meta/recipes-connectivity/ppp/ppp-2.4.5/ppp_on_boot
@@ -0,0 +1,21 @@
+###!/bin/sh
+#
+#   Rename this file to ppp_on_boot and pppd will be fired up as
+#   soon as the system comes up, connecting to `provider'.
+#
+#   If you also make this file executable, and replace the first line
+#   with just "#!/bin/sh", the commands below will be executed instead.
+#
+
+# The location of the ppp daemon itself (shouldn't need to be changed)
+PPPD=/usr/sbin/pppd
+
+# The default provider to connect to
+$PPPD call provider
+
+# Additional connections, which would just use settings from
+# /etc/ppp/options.<tty>
+#$PPPD ttyS0
+#$PPPD ttyS1
+#$PPPD ttyS2
+#$PPPD ttyS3
diff --git a/meta/recipes-connectivity/ppp/ppp-2.4.5/provider b/meta/recipes-connectivity/ppp/ppp-2.4.5/provider
new file mode 100644
index 0000000000..e74d71a8eb
--- /dev/null
+++ b/meta/recipes-connectivity/ppp/ppp-2.4.5/provider
@@ -0,0 +1,35 @@
+# example configuration for a dialup connection authenticated with PAP or CHAP
+#
+# This is the default configuration used by pon(1) and poff(1).
+# See the manual page pppd(8) for information on all the options.
+
+# MUST CHANGE: replace myusername@realm with the PPP login name given to
+# your by your provider.
+# There should be a matching entry with the password in /etc/ppp/pap-secrets
+# and/or /etc/ppp/chap-secrets.
+user "myusername@realm"
+
+# MUST CHANGE: replace ******** with the phone number of your provider.
+# The /etc/chatscripts/pap chat script may be modified to change the
+# modem initialization string.
+connect "/usr/sbin/chat -v -f /etc/chatscripts/pap -T ********"
+
+# Serial device to which the modem is connected.
+/dev/modem
+
+# Speed of the serial line.
+115200
+
+# Assumes that your IP address is allocated dynamically by the ISP.
+noipdefault
+# Try to get the name server addresses from the ISP.
+usepeerdns
+# Use this connection as the default route.
+defaultroute
+
+# Makes pppd "dial again" when the connection is lost.
+persist
+
+# Do not ask the remote to authenticate.
+noauth
+