bluez: Move from meta-extras to meta since required by syncml/openobex

git-svn-id: https://svn.o-hand.com/repos/poky/trunk@1612 311d38ba-8fff-0310-9ca6-ca027cbcb966

3 files changed, 603 insertions, 0 deletions

diff --git a/meta/packages/bluez/bluez-utils/02dtl1_cs.sh b/meta/packages/bluez/bluez-utils/02dtl1_cs.sh
new file mode 100644
index 0000000000..fd81508010
--- /dev/null
+++ b/meta/packages/bluez/bluez-utils/02dtl1_cs.sh
@@ -0,0 +1,57 @@
+#!/bin/sh
+
+case "$1" in
+	suspend)
+		if [ "`/bin/hciconfig`" != "" ]; then
+			#If hciconfig outputs anything then there's probably a Bluetooth
+			# CF card in the slot so shut it down.
+			hcitool dc `hcitool con | grep ACL | sed 's/^.*\([0-9A-F]\{2\}\(:[0-9A-F]\{2\}\)\{5\}\).*$/\1/'`
+			hciconfig hci0 down
+			killall hciattach > /dev/null 2>&1 
+		fi 
+		;;
+
+	resume)
+		#check for kernel version
+		if [ "`uname -r | grep 2.4.`" != "" ]; then
+			k="o"
+		elif [ "`uname -r | grep 2.6.`" != "" ]; then
+			k="ko"
+		else
+			exit 0
+		fi
+
+		if test -e /sbin/cardctl; then
+			CARDCTL=/sbin/cardctl
+		elif test -e /sbin/pccardctl; then
+			CARDCTL=/sbin/pccardctl
+		else
+			exit 0
+		fi
+
+		if [ "`lsmod | grep hci_uart`" != "" ]; then
+			#If the hci_usb module is still loaded then there's a serial based
+			# Bluetooth CF card in the slot, which only needs a resume to get it going
+			# again. 
+			rfcomm bind all
+			$CARDCTL resume
+			hciconfig hci0 up
+		else
+			# only works for nokia dtl1 cards
+			for f in /lib/modules/`uname -r`/kernel/drivers/bluetooth/dtl1_cs.$k
+			do
+				#Enumerate all the self-contained Bluetooth CF card drivers
+				f=`echo $f | sed 's/\.'$k'$//'`
+				f=`basename $f`
+				if [ "`lsmod | grep $f`" != "" ]; then
+					#If one of these drivers is still loaded, then there is probably
+					#a non-serial based Bluetooth CF card in the slot that needs
+					#ejecting and reinserting to get it going again
+					rfcomm bind all
+					$CARDCTL eject
+					$CARDCTL insert
+					hciconfig hci0 up
+				fi
+			done
+		fi
+esac
diff --git a/meta/packages/bluez/bluez-utils/hciattach-ti-bts.patch b/meta/packages/bluez/bluez-utils/hciattach-ti-bts.patch
new file mode 100644
index 0000000000..217c32619d
--- /dev/null
+++ b/meta/packages/bluez/bluez-utils/hciattach-ti-bts.patch
@@ -0,0 +1,489 @@
+--- bluez-utils-3.1/tools/hciattach.c.orig	2006-07-23 14:02:14.000000000 +0200
++++ bluez-utils-3.1/tools/hciattach.c	2006-07-23 14:06:29.000000000 +0200
+@@ -58,6 +58,8 @@
+ #define HCI_UART_3WIRE	2
+ #define HCI_UART_H4DS	3
+ 
++#include "ti_bts.h"
++
+ struct uart_t {
+ 	char *type;
+ 	int  m_id;
+@@ -67,6 +69,7 @@
+ 	int  speed;
+ 	int  flags;
+ 	int  (*init) (int fd, struct uart_t *u, struct termios *ti);
++	char *bts;	/* bluetooth script */
+ };
+ 
+ #define FLOW_CTL	0x0001
+@@ -256,6 +259,114 @@
+ 	return 0;
+ }
+ 
++static int brf6150(int fd, struct uart_t *u, struct termios *ti)
++{
++	bts_t *bfp;
++	int i;
++	unsigned long vers;
++	unsigned char actionbuf[256];
++	unsigned char resp[128];		/* Response */
++	unsigned long count;
++	unsigned short atype;
++
++	if (u->bts == NULL)	/* no script, ignore */
++		return 0;
++
++	bfp = bts_load_script( u->bts, &vers );
++	if (bfp == NULL)
++		return -1;
++
++	fprintf( stderr, "Loading BTS script version %lu\n", vers );
++
++	while ((count = bts_next_action( bfp, actionbuf,
++			sizeof actionbuf - 1, &atype )) != 0) {
++		if (atype == ACTION_REMARKS) {
++			if (actionbuf[0] != 0)
++				fprintf( stderr, "%s\n", actionbuf );
++		}
++		else if (atype == ACTION_SEND_COMMAND) {
++#if 0
++			fprintf( stderr, "ACTION_SEND_COMMAND: ", (int)atype );
++			for (i=0; i<count; i++) {
++				fprintf( stderr, "0x%02x ", actionbuf[i] );
++			}
++			fprintf( stderr, "\n" );
++#endif
++			int n;
++			n = write(fd, actionbuf, count);
++			if (n < 0 || n < count) {
++				perror("Failed to write TI action command");
++				return -1;
++			}
++		}
++		else if (atype == ACTION_WAIT_EVENT) {
++			action_wait_t *wait = (action_wait_t *)actionbuf;
++#if 0
++			fprintf( stderr, "ACTION_WAIT_EVENT: %u msec, %u size, data = ", wait->msec, wait->size );
++			for (i=0; i<wait->size; i++) {
++				fprintf( stderr, "0x%02x ", wait->data[i] );
++			}
++			fprintf( stderr, "\n" );
++#endif
++			usleep(wait->msec);	/* seems they give usec, not msec */
++			/* Read reply. */
++			if ((count = read_hci_event(fd, resp, sizeof resp)) < 0) {
++				perror("Failed to read TI command response");
++				return -1;
++			}
++			if (count < wait->size) {
++				fprintf( stderr, "TI command response is short.");
++			}
++			for (i=0; i<wait->size; i++) {
++				if (i == 3) continue;	/* ignore */
++				if (resp[i] != wait->data[i]) {
++					fprintf( stderr, "TI command response does not match expected result.\n" );
++				}
++			}
++		}
++		else if (atype == ACTION_SERIAL_PORT_PARAMETERS) {
++			action_serial_t *sercmd = (action_serial_t *)actionbuf;
++
++			/* Set actual baudrate */
++			fprintf( stderr,
++				"BTS changing baud rate to %u, flow control to %u\n",
++				sercmd->baud, sercmd->flow_control );
++
++			tcflush(fd, TCIOFLUSH);
++
++			if (sercmd->flow_control)
++				ti->c_cflag |= CRTSCTS;
++			else
++				ti->c_cflag &= ~CRTSCTS;
++			if (tcsetattr(fd, TCSANOW, ti) < 0) {
++				perror("Can't set port settings");
++				return -1;
++			}
++
++			u->speed = sercmd->baud;
++
++			tcflush(fd, TCIOFLUSH);
++			if (set_speed(fd, ti, sercmd->baud) < 0) {
++				perror("Can't set baud rate");
++				return -1;
++			}
++		}
++		else if (atype == ACTION_DELAY) {
++			action_delay_t *delay = (action_delay_t *)actionbuf;
++			usleep(delay->msec);	/* seems they give usec, not msec */
++		}
++		else {
++			fprintf( stderr, "BTS action type = %d: ", (int)atype );
++			for (i=0; i<count; i++) {
++				fprintf( stderr, "0x%02x ", actionbuf[i] );
++			}
++			fprintf( stderr, "\n" );
++		}
++	}
++	bts_unload_script( bfp );
++	return 0;
++}
++
+ static int texas(int fd, struct uart_t *u, struct termios *ti)
+ {
+ 	struct timespec tm = {0, 50000};
+@@ -296,15 +407,26 @@
+ 	} while (resp[4] != cmd[1] && resp[5] != cmd[2]);
+ 
+ 	/* Verify manufacturer */
+-	if ((resp[11] & 0xFF) != 0x0d)
++	if (resp[11] != 0x0d)
+ 		fprintf(stderr,"WARNING : module's manufacturer is not Texas Instrument\n");
+ 
+ 	/* Print LMP version */
+-	fprintf(stderr, "Texas module LMP version : 0x%02x\n", resp[10] & 0xFF);
++	fprintf(stderr, "TI module LMP version : 0x%02x\n", resp[10]);
+ 
+ 	/* Print LMP subversion */
+-	fprintf(stderr, "Texas module LMP sub-version : 0x%02x%02x\n", resp[14] & 0xFF, resp[13] & 0xFF);
++	fprintf(stderr, "TI module LMP sub-version : 0x%02x%02x\n", resp[14], resp[13]);
++	if ((resp[14] >> 2) == 3) {
++		int err;
++		nanosleep(&tm, NULL);
+ 
++		/* BRF6150 */
++		if ((err=brf6150( fd, u, ti )) != 0) {
++			fprintf( stderr, "TI script failed (err=%d)\n",
++				err );
++			return -1;
++		}
++	}
++	
+ 	nanosleep(&tm, NULL);
+ 	return 0;
+ }
+@@ -1103,7 +1225,7 @@
+ {
+ 	printf("hciattach - HCI UART driver initialization utility\n");
+ 	printf("Usage:\n");
+-	printf("\thciattach [-n] [-p] [-b] [-t timeout] [-s initial_speed] <tty> <type | id> [speed] [flow|noflow]\n");
++	printf("\thciattach [-n] [-p] [-b] [-t timeout] [-s initial_speed] [-S bts-script] <tty> <type | id> [speed] [flow|noflow]\n");
+ 	printf("\thciattach -l\n");
+ }
+ 
+@@ -1118,11 +1240,12 @@
+ 	struct sigaction sa;
+ 	struct pollfd p;
+ 	char dev[PATH_MAX];
++	char *bts = NULL;
+ 
+ 	detach = 1;
+ 	printpid = 0;
+ 
+-	while ((opt=getopt(argc, argv, "bnpt:s:l")) != EOF) {
++	while ((opt=getopt(argc, argv, "bnpt:s:S:l")) != EOF) {
+ 		switch(opt) {
+ 		case 'b':
+ 			send_break = 1;
+@@ -1144,6 +1267,10 @@
+ 			init_speed = atoi(optarg);
+ 			break;
+ 
++		case 'S':
++			bts = optarg;
++			break;
++
+ 		case 'l':
+ 			for (i = 0; uart[i].type; i++) {
+ 				printf("%-10s0x%04x,0x%04x\n", uart[i].type,
+@@ -1215,6 +1342,8 @@
+ 	if (init_speed)
+ 		u->init_speed = init_speed;
+ 
++	u->bts = bts;
++
+ 	memset(&sa, 0, sizeof(sa));
+ 	sa.sa_flags   = SA_NOCLDSTOP;
+ 	sa.sa_handler = sig_alarm;
+--- bluez-utils-3.1/tools/Makefile.am.orig	2006-07-23 14:06:59.000000000 +0200
++++ bluez-utils-3.1/tools/Makefile.am	2006-07-23 14:07:18.000000000 +0200
+@@ -37,7 +37,7 @@
+ 
+ noinst_PROGRAMS = hcisecfilter ppporc
+ 
+-hciattach_SOURCES = hciattach.c hciattach_st.c
++hciattach_SOURCES = hciattach.c hciattach_st.c ti_bts.h ti_bts.c
+ 
+ hciconfig_SOURCES = hciconfig.c csr.h csr.c
+ hciconfig_LDADD = @BLUEZ_LIBS@ $(top_builddir)/common/libhelper.a
+--- bluez-utils-3.1/tools/ti_bts.h.orig	2006-07-23 14:07:26.000000000 +0200
++++ bluez-utils-3.1/tools/ti_bts.h	2006-07-23 14:07:46.000000000 +0200
+@@ -0,0 +1,116 @@
++/*
++ * Copyright (c) 2005 Texas Instruments, Inc.
++ *    Ported by SDG Systems, LLC
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
++ *  OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ *  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
++ *  IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
++ *  CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 
++ *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
++ *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
++ *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ *  ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, 
++ *  COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS 
++ *  SOFTWARE IS DISCLAIMED.
++ *
++ */
++
++#ifndef BT_SCRIPT_H
++#define BT_SCRIPT_H
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/*
++ * Define the interface of Bluetooth Script
++ */
++
++typedef void bts_t;
++
++
++#define ACTION_SEND_COMMAND             1   /* Send out raw data (as is) */
++#define ACTION_WAIT_EVENT               2   /* Wait for data */
++#define ACTION_SERIAL_PORT_PARAMETERS   3   
++#define ACTION_DELAY                    4   
++#define ACTION_RUN_SCRIPT               5   
++#define ACTION_REMARKS                  6
++
++/*
++ * Structure for ACTION_SEND_COMMAND
++ */
++typedef struct tagCActionCommand
++{
++    unsigned char data[1]; /* Data to send */
++} action_command_t;
++
++/*
++ * Structure for ACTION_WAIT_EVENT
++ */
++typedef struct tagCActionWaitEvent
++{
++    unsigned long msec; /* in milliseconds */
++    unsigned long size;
++    unsigned char data[1]; /* Data to wait for */
++} action_wait_t;
++
++
++/*
++ * Structure for ACTION_SERIAL_PORT_PARAMETERS
++ */
++typedef struct tagCActionSerialPortParameters
++{
++    unsigned long baud;
++    unsigned long flow_control;
++} action_serial_t;
++
++/* Flow Control Type */
++#define FCT_NONE        0
++#define FCT_HARDWARE    1
++
++#define DONT_CHANGE     0xFFFFFFFF  /* For both baud rate and flow control */
++
++
++/*
++ * Structure for ACTION_DELAY
++ */
++typedef struct tagCActionDelay
++{
++    unsigned long msec; /* in milliseconds */
++} action_delay_t;
++
++/*
++ * Structure for ACTION_RUN_SCRIPT
++ */
++typedef struct tagCActionRunScript
++{
++    char filename[1];
++} action_run_t;
++
++/*
++ * Structure for ACTION_REMARKS
++ */
++typedef struct tagCActionRemarks
++{
++    char m_szRemarks[1];
++} action_remarks_t;
++
++
++const char *cis_create_filename(const unsigned char* cmdparms);
++bts_t * bts_load_script(const char* fname, unsigned long* version);
++unsigned long bts_next_action(const bts_t* bts_fp, unsigned char* action_buf,
++	unsigned long nMaxSize, unsigned short* ptype);
++void bts_unload_script(bts_t* bts_fp);
++
++#ifdef __cplusplus
++};
++#endif
++
++#endif /* BT_SCRIPT_H */
++
+--- bluez-utils-3.1/tools/ti_bts.c.orig	2006-07-23 14:07:28.000000000 +0200
++++ bluez-utils-3.1/tools/ti_bts.c	2006-07-23 14:07:46.000000000 +0200
+@@ -0,0 +1,149 @@
++/*
++ * Copyright (c) 2005 Texas Instruments, Inc.
++ *    Ported by SDG Systems, LLC
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation;
++ *
++ *  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
++ *  OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ *  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
++ *  IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
++ *  CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 
++ *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
++ *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
++ *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ *  ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, 
++ *  COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS 
++ *  SOFTWARE IS DISCLAIMED.
++ *
++ */
++
++
++#include <stdio.h>
++#include <stdlib.h>
++#include "ti_bts.h"
++
++#ifndef MAKEWORD
++#define MAKEWORD(a, b)      ((unsigned short)(((unsigned char)(a)) | ((unsigned short)((unsigned char)(b))) << 8))
++#endif
++
++#define TI_MANUFACTURER_ID  13
++
++/*
++ * Common Init Script specific
++ */
++const char *
++cis_create_filename(const unsigned char* cmdparms)
++{
++    static char bts_file[50];
++
++    /* Check for TI's id */
++    unsigned short manfid = MAKEWORD(cmdparms[8], cmdparms[9]);
++
++    if (TI_MANUFACTURER_ID == manfid) {
++        unsigned short version = MAKEWORD(cmdparms[10], cmdparms[11]);
++        
++        unsigned short chip =  (version & 0x7C00) >> 10;
++        unsigned short min_ver = (version & 0x007F);
++        unsigned short maj_ver = (version & 0x0380) >> 7;
++
++        if (0 != (version & 0x8000)) {
++            maj_ver |= 0x0008;
++        }
++        
++        sprintf( bts_file, "TIInit_%d.%d.%d.bts", 
++            (int)chip, (int)maj_ver, (int)min_ver);
++
++        return &bts_file[0];
++    }
++    return NULL;
++}
++
++typedef struct tagCHeader 
++{
++    unsigned long magic;
++    unsigned long version;
++    unsigned char future[24];
++} cheader_t;
++
++
++/* The value 0x42535442 stands for (in ASCII) BTSB */
++/* which is Bluetooth Script Binary */
++#define FILE_HEADER_MAGIC   0x42535442
++
++
++bts_t *
++bts_load_script(const char* fname, unsigned long* version)
++{
++    bts_t* bts = NULL;
++    FILE* fp = fopen(fname, "rb");
++
++    if (NULL != fp) {
++        /* Read header */
++        cheader_t header;
++
++        /* Read header */
++        if (1 == fread(&header, sizeof(header), 1, fp)) {
++            /* Check magic number for correctness */
++            if (header.magic == FILE_HEADER_MAGIC) {
++                /* If user wants the version number */
++                if (NULL != version) {
++                    *version = header.version;
++                }
++                bts = (bts_t*)fp;
++            }
++        }
++        /* If failed reading the file, close it */
++        if (NULL == bts) {
++            fclose(fp);
++        }
++    }
++    return bts;
++}
++
++unsigned long
++bts_next_action(const bts_t* bts_fp, unsigned char* action_buf,
++    unsigned long nMaxSize, unsigned short* ptype)
++{
++    unsigned long bytes = 0;
++    FILE* fp = (FILE*)bts_fp;
++    unsigned char action_hdr[4];
++
++    if (bts_fp == NULL)
++        return 0;
++
++    /* Each Action has the following: */
++    /* UINT16 type of this action */
++    /* UINT16 size of rest */
++    /* BYTE[] action buffer (for HCI, includes the type byte e.g. 1 for hci command) */
++
++    if (1 == fread(&action_hdr[0], sizeof(action_hdr), 1, fp)) {
++        unsigned short type = *(unsigned short*)&action_hdr[0];
++        unsigned short size = *(unsigned short*)&action_hdr[2];
++
++        if (size <= nMaxSize) {
++            int nread = fread(action_buf, sizeof(action_buf[0]), size, fp);
++
++            if (nread == size) {
++                *ptype = type;
++                bytes = (unsigned long)size;
++            }
++        }
++    }
++
++    return bytes;
++}
++
++void
++bts_unload_script(bts_t* bts_fp)
++{
++    FILE* fp = (FILE*)bts_fp;
++
++    if (NULL != fp) {
++        fclose(fp);
++    }
++}
++
diff --git a/meta/packages/bluez/bluez-utils/hcid.conf b/meta/packages/bluez/bluez-utils/hcid.conf
new file mode 100644
index 0000000000..bb935aa23d
--- /dev/null
+++ b/meta/packages/bluez/bluez-utils/hcid.conf
@@ -0,0 +1,57 @@
+#
+# HCI daemon configuration file.
+#
+
+# HCId options
+options {
+	# Automatically initialize new devices
+	autoinit yes;
+
+	# Security Manager mode
+	#   none - Security manager disabled
+	#   auto - Use local PIN for incoming connections
+	#   user - Always ask user for a PIN
+	#
+	security auto;
+
+	# Pairing mode
+	#   none  - Pairing disabled
+	#   multi - Allow pairing with already paired devices
+	#   once  - Pair once and deny successive attempts
+	pairing multi;
+
+	# Default PIN code for incoming connections
+	passkey "BlueZ";
+}
+
+# Default settings for HCI devices
+device {
+	# Local device name
+	#   %d - device id
+	#   %h - host name
+	name "BlueZ (%d)";
+
+	# Local device class
+	class 0x120112;
+
+	# Default packet type
+	#pkt_type DH1,DM1,HV1;
+
+	# Inquiry and Page scan
+	iscan enable; pscan enable;
+
+	# Default link mode
+	#   none   - no specific policy 
+	#   accept - always accept incoming connections
+	#   master - become master on incoming connections,
+	#            deny role switch on outgoing connections
+	lm accept;
+
+	# Default link policy
+	#   none    - no specific policy
+	#   rswitch - allow role switch
+	#   hold    - allow hold mode
+	#   sniff   - allow sniff mode
+	#   park    - allow park mode
+	lp rswitch,hold,sniff,park;
+}