Remove packaged-staging.bbclass

Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

2 files changed, 0 insertions, 474 deletions

diff --git a/meta/classes/base.bbclass b/meta/classes/base.bbclass
index 3805dd3506..2fff8b4438 100644
--- a/meta/classes/base.bbclass
+++ b/meta/classes/base.bbclass
@@ -70,24 +70,6 @@ oe_runmake() {
 }
 
 
-def package_stagefile(file, d):
-
-    if bb.data.getVar('PSTAGING_ACTIVE', d, True) == "1":
-        destfile = file.replace(bb.data.getVar("TMPDIR", d, 1), bb.data.getVar("PSTAGE_TMPDIR_STAGE", d, 1))
-        bb.mkdirhier(os.path.dirname(destfile))
-        #print "%s to %s" % (file, destfile)
-        bb.copyfile(file, destfile)
-
-package_stagefile_shell() {
-	if [ "$PSTAGING_ACTIVE" = "1" ]; then
-		srcfile=$1
-		destfile=`echo $srcfile | sed s#${TMPDIR}#${PSTAGE_TMPDIR_STAGE}#`
-		destdir=`dirname $destfile`
-		mkdir -p $destdir
-		cp -dp $srcfile $destfile
-	fi
-}
-
 def base_dep_prepend(d):
 	#
 	# Ideally this will check a flag so we will operate properly in
diff --git a/meta/classes/packaged-staging.bbclass b/meta/classes/packaged-staging.bbclass
index 1ea5718699..139597f9cb 100644
--- a/meta/classes/packaged-staging.bbclass
+++ b/meta/classes/packaged-staging.bbclass
@@ -1,458 +1,2 @@
-#
-# Populate builds using prebuilt packages where possible to speed up builds
-# and allow staging to be reconstructed.
-#
-# To use it add that line to conf/local.conf:
-#
-# INHERIT += "packaged-staging"
-#
 
 
-#
-# bitbake.conf set PSTAGING_ACTIVE = "0", this class sets to "1" if we're active
-#
-PSTAGE_PKGVERSION = "${PV}-${PR}"
-PSTAGE_PKGARCH    = "${TARGET_ARCH}"
-PSTAGE_EXTRAPATH  ?= ""
-PSTAGE_PKGPATH    = "${DISTRO}/${OELAYOUT_ABI}${PSTAGE_EXTRAPATH}"
-PSTAGE_PKGPN      = "${@bb.data.expand('staging-${PN}-${MULTIMACH_ARCH}${TARGET_VENDOR}-${TARGET_OS}', d).replace('_', '-')}"
-PSTAGE_PKGNAME    = "${PSTAGE_PKGPN}_${PSTAGE_PKGVERSION}_${PSTAGE_PKGARCH}.ipk"
-PSTAGE_PKG        = "${PSTAGE_DIR}/${PSTAGE_PKGPATH}/${PSTAGE_PKGNAME}"
-PSTAGE_WORKDIR   = "${TMPDIR}/pstage"
-PSTAGE_SCAN_CMD ?= "find ${PSTAGE_TMPDIR_STAGE} \( -name "*.la" -o -name "*-config" \) -type f"
-
-PSTAGE_NATIVEDEPENDS = "\
-    shasum-native \
-    "
-
-BB_STAMP_WHITELIST = "${PSTAGE_NATIVEDEPENDS}"
-
-python () {
-    if bb.data.inherits_class('native', d):
-        bb.data.setVar('PSTAGE_PKGARCH', bb.data.getVar('BUILD_ARCH', d), d)
-    elif bb.data.inherits_class('cross', d) or bb.data.inherits_class('crosssdk', d):
-        bb.data.setVar('PSTAGE_PKGARCH', bb.data.expand("${BUILD_ARCH}_${TARGET_ARCH}", d), d)
-    elif bb.data.inherits_class('nativesdk', d):
-        bb.data.setVar('PSTAGE_PKGARCH', bb.data.expand("${SDK_ARCH}", d), d)
-    elif bb.data.inherits_class('cross-canadian', d):
-        bb.data.setVar('PSTAGE_PKGARCH', bb.data.expand("${SDK_ARCH}_${TARGET_ARCH}", d), d)
-
-    pstage_allowed = True
-
-    # These classes encode staging paths into their scripts data so can only be
-    # reused if we manipulate the paths
-    if bb.data.inherits_class('native', d) or bb.data.inherits_class('cross', d) or bb.data.inherits_class('sdk', d) or bb.data.inherits_class('crosssdk', d):
-        scan_cmd = "grep -Irl ${STAGING_DIR} ${PSTAGE_TMPDIR_STAGE}"
-        bb.data.setVar('PSTAGE_SCAN_CMD', scan_cmd, d)
-
-    # PSTAGE_NATIVEDEPENDS lists the packages we need before we can use packaged 
-    # staging. There will always be some packages we depend on.
-    if bb.data.inherits_class('native', d):
-        pn = bb.data.getVar('PN', d, True)
-        nativedeps = bb.data.getVar('PSTAGE_NATIVEDEPENDS', d, True).split()
-        if pn in nativedeps:
-            pstage_allowed = False
-
-    # Images aren't of interest to us
-    if bb.data.inherits_class('image', d):
-        pstage_allowed = False
-
-    if bb.data.getVar('PSTAGING_DISABLED', d, True) == "1":
-        pstage_allowed = False
-
-    # Add task dependencies if we're active, otherwise mark packaged staging
-    # as inactive.
-    if pstage_allowed:
-        policy = bb.data.getVar("BB_STAMP_POLICY", d, True)
-        if policy == "whitelist" or policy == "full":
-           deps = bb.data.getVarFlag('do_setscene', 'recrdeptask', d) or ""
-           deps += " do_setscene"
-           bb.data.setVarFlag('do_setscene', 'recrdeptask', deps, d)
-
-        bb.data.setVar("PSTAGING_ACTIVE", "1", d)
-    else:
-        bb.data.setVar("PSTAGING_ACTIVE", "0", d)
-}
-
-PSTAGE_MACHCONFIG   = "${PSTAGE_WORKDIR}/${TARGET_ARCH}-opkg.conf"
-
-PSTAGE_PKGMANAGER = "stage-manager-ipkg"
-
-PSTAGE_BUILD_CMD        = "stage-manager-ipkg-build -o 0 -g 0"
-PSTAGE_INSTALL_CMD      = "${PSTAGE_PKGMANAGER} -f ${PSTAGE_MACHCONFIG} -force-depends -o ${TMPDIR} install"
-PSTAGE_UPDATE_CMD       = "${PSTAGE_PKGMANAGER} -f ${PSTAGE_MACHCONFIG} -o ${TMPDIR} update"
-PSTAGE_REMOVE_CMD       = "${PSTAGE_PKGMANAGER} -f ${PSTAGE_MACHCONFIG} -force-depends -o ${TMPDIR} remove"
-PSTAGE_LIST_CMD         = "${PSTAGE_PKGMANAGER} -f ${PSTAGE_MACHCONFIG} -o ${TMPDIR} list_installed"
-
-PSTAGE_TMPDIR_STAGE     = "${WORKDIR}/staging-pkg"
-
-def pstage_manualclean(srcname, destvarname, d):
-	src = os.path.join(bb.data.getVar('PSTAGE_TMPDIR_STAGE', d, True), srcname)
-	dest = bb.data.getVar(destvarname, d, True)
-
-	for walkroot, dirs, files in os.walk(src):
-		for file in files:
-			# Avoid breaking the held lock
-			if (file == "staging.lock"):
-				continue
-			filepath = os.path.join(walkroot, file).replace(src, dest)
-			os.system("rm %s 2> /dev/null" % filepath)
-
-def pstage_set_pkgmanager(d):
-    path = bb.data.getVar("PATH", d, 1)
-    pkgmanager = bb.which(path, 'opkg-cl')
-    if pkgmanager == "":
-        pkgmanager = bb.which(path, 'ipkg-cl')
-    if pkgmanager != "":
-        bb.data.setVar("PSTAGE_PKGMANAGER", pkgmanager, d)
-
-
-def pstage_cleanpackage(pkgname, d):
-	path = bb.data.getVar("PATH", d, 1)
-	pstage_set_pkgmanager(d)
-	list_cmd = bb.data.getVar("PSTAGE_LIST_CMD", d, True)
-
-	bb.note("Checking if staging package installed")
-	lf = bb.utils.lockfile(bb.data.expand("${SYSROOT_LOCK}", d))
-	ret = os.system("PATH=\"%s\" %s | grep %s" % (path, list_cmd, pkgname))
-	if ret == 0:
-		bb.note("Yes. Uninstalling package from staging...")
-		removecmd = bb.data.getVar("PSTAGE_REMOVE_CMD", d, 1)
-		ret = os.system("PATH=\"%s\" %s %s" % (path, removecmd, pkgname))
-		if ret != 0:
-			bb.note("Failure removing staging package")
-	else:
-		bb.note("No. Manually removing any installed files")
-		pstage_manualclean("sysroots", "STAGING_DIR", d)
-		pstage_manualclean("deploy", "DEPLOY_DIR", d)
-
-	bb.utils.unlockfile(lf)
-
-python do_clean_prepend() {
-	"""
-	Clear the build and temp directories
-	"""
-
-	removepkg = bb.data.expand("${PSTAGE_PKGPN}", d)
-	pstage_cleanpackage(removepkg, d)
-
-	stagepkg = bb.data.expand("${PSTAGE_PKG}", d)
-	bb.note("Removing staging package %s" % stagepkg)
-        # Add a wildcard to the end of stagepkg to also get its md5
-        # if it's a fetched package
-	os.system('rm -rf ' + stagepkg + '*')
-}
-
-staging_helper () {
-	# Assemble appropriate opkg.conf for the target arch
-	conffile=${PSTAGE_MACHCONFIG}
-	mkdir -p ${PSTAGE_WORKDIR}/pstaging_lists
-	if [ ! -e $conffile ]; then
-		ipkgarchs="${TARGET_ARCH} ${BUILD_ARCH} ${BUILD_ARCH}_${TARGET_ARCH}"
-		priority=1
-		for arch in $ipkgarchs; do
-			echo "arch $arch $priority" >> $conffile
-			priority=$(expr $priority + 5)
-		done
-		echo "dest root /" >> $conffile
-	fi
-	if [ ! -e ${TMPDIR}${libdir_native}/opkg/info/ ]; then
-		mkdir -p ${TMPDIR}${libdir_native}/opkg/info/
-	fi
- 	if [ ! -e ${TMPDIR}${libdir_native}/ipkg/ ]; then
-		ln -sf opkg/ ${TMPDIR}${libdir_native}/ipkg || true
-	fi
-}
-
-def staging_fetch(stagepkg, d):
-    import bb.fetch
-
-    # only try and fetch if the user has configured a mirror
-    if bb.data.getVar('PSTAGE_MIRROR', d) != "":
-        # Copy the data object and override DL_DIR and SRC_URI
-        pd = d.createCopy()
-        dldir = bb.data.expand("${PSTAGE_DIR}/${PSTAGE_PKGPATH}", pd)
-        mirror = bb.data.expand("${PSTAGE_MIRROR}/${PSTAGE_PKGPATH}/", pd)
-        srcuri = mirror + os.path.basename(stagepkg)
-        bb.data.setVar('DL_DIR', dldir, pd)
-        bb.data.setVar('SRC_URI', srcuri, pd)
-
-        # Try a fetch from the pstage mirror, if it fails just return and
-        # we will build the package
-        try:
-            bb.fetch.init([srcuri], pd)
-            bb.fetch.go(pd, [srcuri])
-        except:
-            return
-
-PSTAGE_TASKS_COVERED = "fetch unpack munge patch configure qa_configure rig_locales compile sizecheck install deploy package populate_sysroot package_write_deb package_write_ipk package_write package_stage qa_staging"
-
-SCENEFUNCS += "packagestage_scenefunc"
-
-python packagestage_scenefunc () {
-    if bb.data.getVar("PSTAGING_ACTIVE", d, 1) == "0":
-        return
-
-    bb.build.exec_func("staging_helper", d)
-
-    removepkg = bb.data.expand("${PSTAGE_PKGPN}", d)
-
-    pstage_cleanpackage(removepkg, d)
-
-    stagepkg = bb.data.expand("${PSTAGE_PKG}", d)
-    if not os.path.exists(stagepkg):
-        staging_fetch(stagepkg, d)
-
-    if os.path.exists(stagepkg):
-        path = bb.data.getVar("PATH", d, 1)
-        pstage_set_pkgmanager(d)
-        file = bb.data.getVar("FILE", d, True)
-        bb.debug(2, "Packaged staging active for %s\n" % file)
-
-        #
-        # Install the staging package somewhere temporarily so we can extract the stamp files
-        #
-        bb.mkdirhier(bb.data.expand("${WORKDIR}/tstage/${libdir_native}/opkg/info/ ", d))
-        cmd = bb.data.expand("${PSTAGE_PKGMANAGER} -f ${PSTAGE_MACHCONFIG} -force-depends -o ${WORKDIR}/tstage install", d)
-        ret = os.system("PATH=\"%s\" %s %s" % (path, cmd, stagepkg))
-        if ret != 0:
-            bb.fatal("Couldn't install the staging package to a temp directory")
-
-        #
-        # Copy the stamp files into the main stamps directoy
-        #
-        cmd = bb.data.expand("cp -dpR ${WORKDIR}/tstage/stamps/* ${TMPDIR}/stamps/", d)
-        ret = os.system(cmd)
-        if ret != 0:
-            bb.fatal("Couldn't copy the staging package stamp files")
-
-        #
-        # Iterate over the stamps seeing if they're valid. If we find any that
-        # are invalid or the task wasn't in the taskgraph, assume caution and 
-        # do a rebuild.
-        #
-        # FIXME - some tasks are safe to ignore in the task graph. e.g. package_write_*
-        stageok = True
-        taskscovered = bb.data.getVar("PSTAGE_TASKS_COVERED", d, True).split()
-        stamp = bb.data.getVar("STAMP", d, True)
-        for task in taskscovered:
-            task = 'do_' + task
-            stampfn = "%s.%s" % (stamp, task)
-            bb.debug(1, "Checking %s" % (stampfn))
-            if os.path.exists(stampfn):
-                stageok = bb.runqueue.check_stamp_fn(file, task, d)
-                bb.debug(1, "Result %s" % (stageok))
-                if not stageok:
-                    break
-
-        # Remove the stamps and files we added above
-        # FIXME - we should really only remove the stamps we added
-        os.system('rm -f ' + stamp + '.*')
-        os.system(bb.data.expand("rm -rf ${WORKDIR}/tstage", d))
-
-        if stageok:
-            bb.note("Staging package found, using it for %s." % file)
-            installcmd = bb.data.getVar("PSTAGE_INSTALL_CMD", d, 1)
-            lf = bb.utils.lockfile(bb.data.expand("${SYSROOT_LOCK}", d))
-            ret = os.system("PATH=\"%s\" %s %s" % (path, installcmd, stagepkg))
-            bb.utils.unlockfile(lf)
-            if ret != 0:
-                bb.note("Failure installing prestage package")
-
-            bb.build.exec_func("staging_package_libtoolhack", d)
-
-            bb.build.make_stamp("do_stage_package_populated", d)
-        else:
-            bb.note("Staging package found but invalid for %s" % file)
-
-}
-packagestage_scenefunc[cleandirs] = "${PSTAGE_TMPDIR_STAGE}"
-packagestage_scenefunc[dirs] = "${STAGING_DIR}"
-
-addhandler packagedstage_stampfixing_eventhandler
-python packagedstage_stampfixing_eventhandler() {
-    if bb.event.getName(e) == "StampUpdate":
-        taskscovered = bb.data.getVar("PSTAGE_TASKS_COVERED", e.data, 1).split()
-        for (fn, task) in e.targets:
-            # strip off 'do_'
-            task = task[3:]
-            if task in taskscovered:
-                stamp = "%s.do_stage_package_populated" % e.stampPrefix[fn]
-                if os.path.exists(stamp):
-                    # We're targetting a task which was skipped with packaged staging
-                    # so we need to remove the autogenerated stamps.
-                    for task in taskscovered:
-                        dir = "%s.do_%s" % (e.stampPrefix[fn], task)
-                        os.system('rm -f ' + dir)
-                    os.system('rm -f ' + stamp)
-
-    return NotHandled
-}
-
-packagedstaging_fastpath () {
-	if [ "$PSTAGING_ACTIVE" = "1" ]; then
-		mkdir -p ${PSTAGE_TMPDIR_STAGE}/sysroots/
-		cp -fpPR ${SYSROOT_DESTDIR}/${STAGING_DIR}/* ${PSTAGE_TMPDIR_STAGE}/sysroots/ || /bin/true
-	fi
-}
-
-do_populate_sysroot[dirs] =+ "${PSTAGE_DIR}"
-
-staging_packager () {
-
-	mkdir -p ${PSTAGE_TMPDIR_STAGE}/CONTROL
-	mkdir -p ${PSTAGE_DIR}/${PSTAGE_PKGPATH}
-
-	echo "Package: ${PSTAGE_PKGPN}"         >  ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
-	echo "Version: ${PSTAGE_PKGVERSION}"    >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
-	echo "Description: ${DESCRIPTION}"      >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
-	echo "Section: ${SECTION}"              >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
-	echo "Priority: Optional"               >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
-	echo "Maintainer: ${MAINTAINER}"        >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
-	echo "Architecture: ${PSTAGE_PKGARCH}"  >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
-	
-	# Protect against empty SRC_URI
-	srcuri="${SRC_URI}"
-	if [ "$srcuri" == "" ]; then		
-		srcuri="OpenEmbedded"
-	fi
-	echo "Source: ${SRC_URI}"               >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
-
-	# Deal with libtool not supporting sysroots
-	# Need to remove hardcoded paths and fix these when we install the
-	# staging packages.
-	# Could someone please add sysroot support to libtool!
-        for i in `${PSTAGE_SCAN_CMD}` ; do \
-                sed -i -e s:${STAGING_DIR}:FIXMESTAGINGDIR:g $i
-                echo $i | sed -e 's:${PSTAGE_TMPDIR_STAGE}/::' >> ${PSTAGE_TMPDIR_STAGE}/sysroots/fixmepath
-        done
-        
-	${PSTAGE_BUILD_CMD} ${PSTAGE_TMPDIR_STAGE} ${PSTAGE_DIR}/${PSTAGE_PKGPATH}
-}
-
-staging_package_installer () {
-	#${PSTAGE_INSTALL_CMD} ${PSTAGE_PKG}
-
-	STATUSFILE=${TMPDIR}${libdir_native}/opkg/status
-	echo "Package: ${PSTAGE_PKGPN}"        >> $STATUSFILE
-	echo "Version: ${PSTAGE_PKGVERSION}"   >> $STATUSFILE
-	echo "Status: install user installed"  >> $STATUSFILE
-	echo "Architecture: ${PSTAGE_PKGARCH}" >> $STATUSFILE
-	echo "" >> $STATUSFILE
-
-	CTRLFILE=${TMPDIR}${libdir_native}/opkg/info/${PSTAGE_PKGPN}.control
-	echo "Package: ${PSTAGE_PKGPN}"        > $CTRLFILE
-	echo "Version: ${PSTAGE_PKGVERSION}"   >> $CTRLFILE
-	echo "Architecture: ${PSTAGE_PKGARCH}" >> $CTRLFILE
-
-	cd ${PSTAGE_TMPDIR_STAGE}
-	find -type f | grep -v ./CONTROL | sed -e 's/^\.//' > ${TMPDIR}${libdir_native}/opkg/info/${PSTAGE_PKGPN}.list
-}
-
-python staging_package_libtoolhack () {
-	# Deal with libtool not supporting sysroots and add our new
-	# staging location
-        tmpdir = bb.data.getVar('TMPDIR', d, True)
-        staging = bb.data.getVar('STAGING_DIR', d, True)
-        fixmefn =  staging + "/fixmepath"
-        try:
-            fixmefd = open(fixmefn,"r")
-            fixmefiles = fixmefd.readlines()
-            fixmefd.close()
-            os.system('rm -f ' + fixmefn)
-            for file in fixmefiles:
-                os.system("sed -i -e s:FIXMESTAGINGDIR:%s:g %s" % (staging, tmpdir + '/' + file))
-        except IOError:
-            pass
-}
-
-python do_package_stage () {
-    if bb.data.getVar("PSTAGING_ACTIVE", d, 1) != "1":
-        return
-
-    #
-    # Handle deploy/ packages
-    #
-    bb.build.exec_func("read_subpackage_metadata", d)
-    stagepath = bb.data.getVar("PSTAGE_TMPDIR_STAGE", d, 1)
-    tmpdir = bb.data.getVar("TMPDIR", d, True)
-    packages = (bb.data.getVar('PACKAGES', d, 1) or "").split()
-    if len(packages) > 0:
-        if bb.data.inherits_class('package_ipk', d):
-            ipkpath = bb.data.getVar('DEPLOY_DIR_IPK', d, True).replace(tmpdir, stagepath)
-        if bb.data.inherits_class('package_deb', d):
-            debpath = bb.data.getVar('DEPLOY_DIR_DEB', d, True).replace(tmpdir, stagepath)
-        if bb.data.inherits_class('package_rpm', d):
-            rpmpath = bb.data.getVar('DEPLOY_DIR_RPM', d, True).replace(tmpdir, stagepath)
-
-        for pkg in packages:
-            pkgname = bb.data.getVar('PKG_%s' % pkg, d, 1)
-            if not pkgname:
-                pkgname = pkg
-            arch = bb.data.getVar('PACKAGE_ARCH_%s' % pkg, d, 1)
-            if not arch:
-                arch = bb.data.getVar('PACKAGE_ARCH', d, 1)
-            pr = bb.data.getVar('PR_%s' % pkg, d, 1)
-            if not pr:
-                pr = bb.data.getVar('PR', d, 1)
-            if not packaged(pkg, d):
-                continue
-            if bb.data.inherits_class('package_ipk', d):
-                srcname = bb.data.expand(pkgname + "_${PV}-" + pr + "_" + arch + ".ipk", d)
-                srcfile = bb.data.expand("${DEPLOY_DIR_IPK}/" + arch + "/" + srcname, d)
-                if os.path.exists(srcfile):
-                    destpath = ipkpath + "/" + arch + "/"
-                    bb.mkdirhier(destpath)
-                    bb.copyfile(srcfile, destpath + srcname)
-
-            if bb.data.inherits_class('package_deb', d):
-                if arch == 'all':
-                    srcname = bb.data.expand(pkgname + "_${PV}-" + pr + "_all.deb", d)
-                else:
-                    srcname = bb.data.expand(pkgname + "_${PV}-" + pr + "_${DPKG_ARCH}.deb", d)
-                srcfile = bb.data.expand("${DEPLOY_DIR_DEB}/" + arch + "/" + srcname, d)
-                if os.path.exists(srcfile):
-                    destpath = debpath + "/" + arch + "/" 
-                    bb.mkdirhier(destpath)
-                    bb.copyfile(srcfile, destpath + srcname)
-
-            if bb.data.inherits_class('package_rpm', d):
-		version = bb.data.getVar('PV', d, 1)
-		version = version.replace('-', '+')
-		bb.data.setVar('RPMPV', version, d)
-                srcname = bb.data.expand(pkgname + "-${RPMPV}-" + pr + ".${TARGET_ARCH}.rpm", d)
-                srcfile = bb.data.expand("${DEPLOY_DIR_RPM}/" + arch + "/" + srcname, d)
-                if os.path.exists(srcfile):
-                    destpath = rpmpath + "/" + arch + "/" 
-                    bb.mkdirhier(destpath)
-                    bb.copyfile(srcfile, destpath + srcname)
-
-
-    #
-    # Handle stamps/ files
-    #
-    stampfn = bb.data.getVar("STAMP", d, True)
-    destdir = os.path.dirname(stampfn.replace(tmpdir, stagepath))
-    bb.mkdirhier(destdir)
-    # We need to include the package_stage stamp in the staging package so create one
-    bb.build.make_stamp("do_package_stage", d)
-    os.system("cp -dpR %s.do_* %s/" % (stampfn, destdir))
-
-    pstage_set_pkgmanager(d)
-    bb.build.exec_func("staging_helper", d)
-    bb.build.exec_func("staging_packager", d)
-    lf = bb.utils.lockfile(bb.data.expand("${SYSROOT_LOCK}", d))
-    bb.build.exec_func("staging_package_installer", d)
-    bb.utils.unlockfile(lf)
-}
-
-#
-# Note an assumption here is that do_deploy runs before do_package_write/do_populate_sysroot
-#
-addtask package_stage after do_package_write do_populate_sysroot before do_build
-
-do_package_stage_all () {
-	:
-}
-do_package_stage_all[recrdeptask] = "do_package_stage"
-addtask package_stage_all after do_package_stage before do_build