openembedded-core.git/meta/recipes-extended/images, branch jethro

recipes-extended: remove duplicate recipe and .wks

2015-09-29T14:15:48+00:00

Removed wic-image-minimal.bb and wic-image-minimal.wks as they're
also present in meta-selftest/recipes-test/images/

Signed-off-by: Ed Bartosh 
Signed-off-by: Richard Purdie

wic-image-minimal: add wic image recipe and .wks

2015-09-11T22:38:03+00:00

Added example of recipe and .wks file to create partitioned image.

This image is using quite complex partitioning scheme.
It uses its own rootfs to populate two partitions in two different ways.
It also uses core-image-minimal rootfs to populate another partition.

This is how wic reports about artifacts used to create this image:
  ROOTFS_DIR: tmp/work/qemux86_64-poky-linux/wic-image-minimal/1.0-r0/rootfs
  ROOTFS_DIR["/core"]: tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs
  ROOTFS_DIR["/backup"]: tmp/work/qemux86_64-poky-linux/wic-image-minimal/1.0-r0/rootfs
  BOOTIMG_DIR: tmp/sysroots/qemux86-64/usr/share
  KERNEL_DIR: tmp/deploy/images/qemux86-64
  NATIVE_SYSROOT: tmp/sysroots/x86_64-linux

Signed-off-by: Ed Bartosh 

Signed-off-by: Ross Burton

core-image-lsb-sdk: use kernel-devsrc to ensure kernel module builds work

2015-07-20T09:39:02+00:00

With the move of the kernel source to the kernel-devsrc, we need this package to
ensure the kernel module sanity tests made on core-image-lsb-sdk continue to
pass. Therefore update the name of the package included in the image.

Signed-off-by: Ross Burton

core-image-kernel-dev: Define a correct subset of TEST_SUITES to run for this image

2015-07-07T22:57:12+00:00

Since this image can be built with both poky and poky-lsb, ensure the correct
tests are run in both cases, the auto detection does not quite work right in the
poky-lsb case since not all the Posix cmdline utilites are added. Add connman and
connman test for network sanity

Signed-off-by: Saul Wold 
Signed-off-by: Ross Burton

kernel-dev: install all modules by default

2015-02-08T08:00:04+00:00

When doing kernel development testing, we want all the modules that were
built to be installed on the target.

Signed-off-by: Bruce Ashfield

images: introduce core-image-kernel-dev

2014-12-20T11:24:03+00:00

When building a new kernel, or testing and update to the kernel there
are a set of packages that are sensitive to APIs, build system and
other changes associated with the kernel.

After building this recipe, we can be reasonably sure that a new kernel
package and coupled userspace have been built, installed and tested
via a single image.

Signed-off-by: Bruce Ashfield

core-image-testmaster.bb: add bzip2 to image

2014-06-13T11:51:52+00:00

YB: #6375

Some test image fstypes require bzip2 decompression.

Signed-off-by: Corneliu Stoicescu 
Signed-off-by: Richard Purdie

core-image-lsb: enforce pam as a needed distro feature

2014-04-01T10:56:31+00:00

core-image-lsb only gave a warning:
"WARNING: Building libpam but 'pam' isn't in DISTRO_FEATURES,
PAM won't work correctly"
when the proper DISTRO was not set for it.
default choice would be DISTRO = "poky-lsb",
but not necessarily, depending on each custom distro.

This fix will enforce the proper usage of pam
as a distro feature for core-image-lsb by giving
an error instead of just a warning.

Fixes [YOCTO #6073]

Signed-off-by: Cristian Iorga 
Signed-off-by: Richard Purdie

recipes-extended: add master image for testing purposes

2014-03-31T16:54:35+00:00

Add a custom recipe with custom initramfs and installers, that makes
it easy to deploy a master image for testing purposes.
We need a master image running on the target hardware, that should be a
known good build, with a set of utilities installed so that we use it
to deploy the images under test.

This core-image-testmaster recipe isn't a requirement per se, any image can
be used as long as the required conditions are met.
The test code assumes:
 - that the device has a second rootfs labeled as testrootfs
 - it has a properly configured bootloader entry (called test) for the second kernel and rootfs
 - the master image has a /etc/masterimage file so it can differentiate between master
and test images
 - the master image has tar, mount, bash (basically the normal linux utilities not the busybox
ones)

[YOCTO #5614]

Signed-off-by: Stefan Stanacar 
Signed-off-by: Richard Purdie

core-image-basic / packagegroup-core-basic: rename to *-full-cmdline

2014-03-07T14:44:25+00:00

This more accurately represents what this image and packagegroup are
intended to provide (a more complete command-line environment similar
to what you would find on a traditional Linux system), and avoids
confusion with the similarly named core-image-base and
packagegroup-base.

Fixes [YOCTO #2424].

Signed-off-by: Paul Eggleton 
Signed-off-by: Richard Purdie