openembedded-core.git/meta/recipes-devtools/dpkg, branch master Mirror of openembedded-core dpkg: Add PACKAGECONFIG for liblzma and enable it 2017-03-31T14:08:27+00:00 Richard Purdie richard.purdie@linuxfoundation.org 2017-03-31T13:39:16+00:00 97b2a20b55acf76ebaacff0054e0f3c2b4236847 liblzma is part of xz and we already build it but configure it out. This makes no sense. Enabling it means we gain multithreaded compression and it speeds dpkg-deb up massively. It also removes the fork overhead of separate xz processes. Turning the existing config into a PACKAGECONFIG and turning it on by default therefore makes best use of what we have available. The manual RDEPENDS are no longer needed since it uses liblzma which is picked up by the shlibs code magically. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> 
liblzma is part of xz and we already build it but configure it out. This makes
no sense. Enabling it means we gain multithreaded compression and it speeds
dpkg-deb up massively. It also removes the fork overhead of separate xz processes.

Turning the existing config into a PACKAGECONFIG and turning it on by default
therefore makes best use of what we have available.

The manual RDEPENDS are no longer needed since it uses liblzma which is picked
up by the shlibs code magically.

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
run-postinsts: simplify the logic of whether to install it to images 2017-03-13T09:43:21+00:00 Alexander Kanavin alexander.kanavin@linux.intel.com 2017-02-17T16:47:22+00:00 697804229a172125ce7d3bfc9b343812d6fe3240 The logic is scattered all over the place, but amounts to "install, unless the rootfs is read only". Let's express that directly. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> 
The logic is scattered all over the place, but amounts to
"install, unless the rootfs is read only". Let's express that directly.

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
dpkg: Upgrade to 1.18.10 2017-03-01T12:54:17+00:00 Aníbal Limón anibal.limon@linux.intel.com 2017-02-21T18:34:52+00:00 4c23b8ce417551f2ee252426158fea272b8a9dfd Add a patch to don't use --clamp-time when call tar because isn't supported in tar hosts versions. See 0007-dpkg-deb-build.c-Remove-usage-of-clamp-mtime-in-tar.patch patch for details. Rebased patch: - 0003-Our-pre-postinsts-expect-D-to-be-set-when-running-in.patch Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Edwin Plauchu <edwin.plauchu.camacho@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> 
Add a patch to don't use --clamp-time when call tar because
isn't supported in tar hosts versions. See
0007-dpkg-deb-build.c-Remove-usage-of-clamp-mtime-in-tar.patch
patch for details.

Rebased patch:

-  0003-Our-pre-postinsts-expect-D-to-be-set-when-running-in.patch

Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Edwin Plauchu <edwin.plauchu.camacho@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
meta: remove True option to getVar calls 2016-12-16T08:30:03+00:00 Joshua Lock joshua.g.lock@intel.com 2016-12-14T21:13:04+00:00 7c552996597faaee2fbee185b250c0ee30ea3b5f getVar() now defaults to expanding by default, thus remove the True option from getVar() calls with a regex search and replace. Search made with the following regex: getVar ?\(( ?[^,()]*), True\) Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> 
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.

Search made with the following regex: getVar ?\(( ?[^,()]*), True\)

Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
dpkg: Only set DEB_HOST_ARCH in target case 2016-09-28T09:15:55+00:00 Richard Purdie richard.purdie@linuxfoundation.org 2016-09-28T08:14:55+00:00 bbce0f0fed2e2e1a79ae28540915696c6383cd53 If we don't do this, the sstate checksums vary for dpkg-native depending on which MACHINE is set and this is clearly incorrect. It leads to dpkg-native rebuilding far too often. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> 
If we don't do this, the sstate checksums vary for dpkg-native depending
on which MACHINE is set and this is clearly incorrect. It leads
to dpkg-native rebuilding far too often.

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dpkg: Avoid automatic target architecture detection 2016-08-10T09:45:32+00:00 Alexandre Belloni alexandre.belloni@free-electrons.com 2016-08-08T09:56:09+00:00 b01a01ff47e09da4aaa2db992380ca0498f0e5ae dpkg is using a script (dpkg-architecture.pl) to detect the target architecture automatically. Unfortunately, it is using the cross compiler prefix to do the detection and for ARM, oe-core is using <vendor>-linux-gnueabi for toolchains with and without call-convention hard. The script then always detects 'armel' and never gets 'armhf' for call-convention hard. This solves: dpkg: error processing archive evtest_1.32+0+b8343ec112-r0_armhf.deb (--install): package architecture (armhf) does not match system (armel) Errors were encountered while processing: evtest_1.32+0+b8343ec112-r0_armhf.deb Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Ross Burton <ross.burton@intel.com> 
dpkg is using a script (dpkg-architecture.pl) to detect the target
architecture automatically.
Unfortunately, it is using the cross compiler prefix to do the detection
and for ARM, oe-core is using <vendor>-linux-gnueabi for toolchains with
and without call-convention hard. The script then always detects
'armel' and never gets 'armhf' for call-convention hard.

This solves:
dpkg: error processing archive evtest_1.32+0+b8343ec112-r0_armhf.deb (--install):
 package architecture (armhf) does not match system (armel)
 Errors were encountered while processing:
 evtest_1.32+0+b8343ec112-r0_armhf.deb

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
dpkg: put start-stop-daemon into a separate package 2016-08-04T14:05:48+00:00 Joe Slater jslater@windriver.com 2016-08-01T21:59:43+00:00 b1e439a046e0cd48709fb2ee33cafa9fe23284be This is useful for supplying start-stop-daemon to images that do not include busybox. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> 
This is useful for supplying start-stop-daemon to
images that do not include busybox.

Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
dpkg: use snapshot.debian.org for SRC_URI 2016-07-26T07:56:08+00:00 Ross Burton ross.burton@intel.com 2016-07-25T23:14:11+00:00 b32d430c3c7dccf3a8d06ab492d648893a05950f Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will only contain releases that are currently in Debian, so currently doesn't contain 1.18.7 as unstable has moved on to 1.18.9. So, move all of SRC_URI to the .bb so it can use snapshot.debian.org instead, and set UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream release checking continues to work. Signed-off-by: Ross Burton <ross.burton@intel.com> 
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will only
contain releases that are currently in Debian, so currently doesn't contain
1.18.7 as unstable has moved on to 1.18.9.

So, move all of SRC_URI to the .bb so it can use snapshot.debian.org instead,
and set UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream release checking
continues to work.

Signed-off-by: Ross Burton <ross.burton@intel.com>
dpkg: Upgrade to 1.18.7 2016-06-03T15:53:36+00:00 Aníbal Limón anibal.limon@linux.intel.com 2016-05-26T21:18:45+00:00 3812f58b3a438ae533c282170416cdd1681868e0 Rebased patches: 0003-Our-pre-postinsts-expect-D-to-be-set-when-running-in.patch add_armeb_triplet_entry.patchadd_armeb_triplet_entry.patch Patches removed already in upstream: [1] 0001-When-running-do_package_write_deb-we-have-trees-of-h.patch [2] fix-abs-redefine.patch Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> [1] https://anonscm.debian.org/cgit/dpkg/dpkg.git/commit/dpkg-deb/build.c?id=7a91341446851cd3594a8b752823b8c1f26d652a [2] https://anonscm.debian.org/cgit/dpkg/dpkg.git/commit/lib/dpkg/i18n.h?id=ecd4baa091619cbbdd70043129dd992573580371 Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> 
Rebased patches:

0003-Our-pre-postinsts-expect-D-to-be-set-when-running-in.patch
add_armeb_triplet_entry.patchadd_armeb_triplet_entry.patch

Patches removed already in upstream:

	[1] 0001-When-running-do_package_write_deb-we-have-trees-of-h.patch
	[2] fix-abs-redefine.patch

Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>

[1] https://anonscm.debian.org/cgit/dpkg/dpkg.git/commit/dpkg-deb/build.c?id=7a91341446851cd3594a8b752823b8c1f26d652a
[2] https://anonscm.debian.org/cgit/dpkg/dpkg.git/commit/lib/dpkg/i18n.h?id=ecd4baa091619cbbdd70043129dd992573580371
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dkpg: Use tar everywhere (not gtar) 2016-03-07T10:47:45+00:00 Richard Purdie richard.purdie@linuxfoundation.org 2016-03-07T00:13:48+00:00 d683913119082f718af64f2d402bac67b660fca6 All our systems usually have tar, if we want the native sstate to work universally, we need to prefer this. This avoids a system with gtar causing dpkg-native to use it and it not being present on some systems. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> 
All our systems usually have tar, if we want the native sstate to work
universally, we need to prefer this. This avoids a system with gtar
causing dpkg-native to use it and it not being present on some systems.

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>