openembedded-core.git/meta/recipes-core/ncurses, branch dora

ncurses-terminfo: Remove bashism from basic terminfo installation

2013-12-12T16:53:03+00:00

The vtX terminfo files aren't being copied on systems where bash isn't
the default shell (debian, etc.).  I removed the bash specific syntax
so the files are properly copied on these systems.

(From OE-Core master rev: edd7d53c6149b27d5636a458db91650c8c400612)

Signed-off-by: Seth Bollinger 
Signed-off-by: Saul Wold 
Signed-off-by: Richard Purdie 
Signed-off-by: Robert Yang

ncurses: add xterm-256color to terminfo-base

2013-07-12T17:12:13+00:00

This is to address the buildtools-tarball still having problems with certain
xterms

[YOCTO #4835]

Signed-off-by: Saul Wold

ncurses: Fix problems expanding ncurses-libtinfo when in IMAGE_INSTALL

2013-05-30T19:55:59+00:00

The ncurses package was generating the following error as a result
of not specifing the PACKAGES_DYNAMIC correctly.  This error only
appear when using the IMAGE_INSTALL list that has been expanded by
the hob or from the pkgdata.

ERROR: Nothing RPROVIDES 'ncurses-libtinfo'

The dynamic packages are named using "${PN}-lib%s".  So we check for
${PN}-lib*

Signed-off-by: Jason Wessel 
Signed-off-by: Mark Hatle 
Signed-off-by: Saul Wold 
Signed-off-by: Richard Purdie

ncurses: Fix case where ${B} != ${S}

2013-03-18T13:17:39+00:00

This change allows ${B} != ${S} builds to work as otherwise
gnu-configize is executed in the incorrect directory.

Signed-off-by: Richard Purdie

Help ncurses-native find terminfo on RHEL 6

2013-03-02T12:53:54+00:00

[ CQID: WIND00405305 ]

When using ncurses from sstate cache it is not able to find terminfo
for screen on RHEL 6.  While RHEL 6 has /lib/terminfo, it is not
complete, the complete terminfo database is in /usr/share/terminfo.  This
results failure of programs linked to ncurses, such as menuconfig.

Signed-off-by: Jeffrey C Honig 
Signed-off-by: Saul Wold

ncurses.inc: Fix display corruption and add fallback for sstate compiled paths

2013-02-11T14:45:21+00:00

CQID: WIND00402979

Display corruption was occurring on 64 bit hosts using menuconfig for
the kernel and busybox with the ncurses-native or ncurses-nativesdk
because the configure arguments were not sufficient vs the expected
use from the upstream source.

Also changed in this commit is to provide a fallback to the hard
compiled paths for the terminfo and termcap.  Eventually this needs to
be fixed another way if we want a truly portable SDK because any SDK
that is relocated or native binaries pulled out of the sstate can end
up referencing terminfo files that no longer are in the same location.
Because the host system has terminfo files that ncurses will happily
use we might as well have a fall back to buy some time for a better
fix, vs having thing just not work occasionally when using sstate.

Signed-off-by: Jason Wessel 
Signed-off-by: Richard Purdie

ncurses: update gnu-config files in do_configure()

2012-11-19T15:18:04+00:00

Signed-off-by: Marcin Juszkiewicz 
Signed-off-by: Richard Purdie

recipes-core: replace virtclass-native(sdk) with class-native(sdk)

2012-11-02T16:15:29+00:00

The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.

[YOCTO #3297]

Signed-off-by: Robert Yang 
Signed-off-by: Saul Wold

nativesdk-ncurses 5.9: files were installed but not shipped

2012-10-24T11:47:28+00:00

There is an warning:

$ bitbake nativesdk-ncurses

WARNING: QA Issue: nativesdk-ncurses: Files/directories were installed
but not shipped
  /opt/poky/1.3+snapshot/sysroots/i686-pokysdk-linux/usr/bin/clear.ncurses
  /opt/poky/1.3+snapshot/sysroots/i686-pokysdk-linux/usr/bin/reset.ncurses
NOTE: Tasks Summary: Attempted 533 tasks of which 521 didn't need to be
rerun and all succeeded.

And there is no clear or reset tool in the SDK.

This is caused by:
ALTERNATIVE_ncurses-tools = "clear reset"

It creates clear.ncurses and reset.ncurses which are used for avoiding
the conflicts with the target busybox, but SDK doesn't need them since
there is no nativesdk-busybox (then no conflicts), so:

ALTERNATIVE_ncurses-tools_class-target = "clear reset"

will fix the problem.

[YOCTO #3325]

Signed-off-by: Robert Yang 
Signed-off-by: Saul Wold

Cleanup: fix PN == BPN cases

2012-10-02T10:15:35+00:00

When building target packages, it used to be enought to check for PN == BPN, however
with the multilib configurations, this can lead to subtle errors.  Change instances
of PN == BPN, to ${CLASSOVERRIDE} == 'class-target'.

Signed-off-by: Mark Hatle 
Signed-off-by: Richard Purdie