/recipes/u-boot/u-boot-git/beagleboard/

• ../
• 0001-OMAP-mmc-add-support-for-second-and-third-mmc-chan.patch
• 0001-OMAP3-Beagle-enable-support-for-second-and-third-m.patch
• 0001-OMAP3-enable-i2c-bus-switching-for-Beagle-and-Overo.patch
• 0002-OMAP3-add-board-revision-detection-for-Overo.patch
• 0003-OMAP3-update-Beagle-revision-detection-to-recognize-.patch
• 0004-OMAP3-Set-VAUX2-to-1.8V-for-EHCI-PHY-on-Beagle-Rev-C.patch
• 0005-OMAP3-add-entry-for-rev-3.1.2-check-and-display-max-.patch
• 0006-OMAP3-add-mpurate-boot-arg-for-overo-and-beagle.patch
• 0007-OMAP3-detect-expansion-board-type-version-using-eepr.patch
• 0008-OMAP3-Overo-enable-config-eeprom-to-set-u-boot-env-v.patch
• 0009-OMAP3-Overo-enable-input-on-MMC1_CLK-and-MMC3_CLK-pi.patch
• 0010-OMAP3-Overo-set-CONFIG_SYS_I2C_SPEED-to-400Khz.patch
• 0011-OMAP3-trim-excessively-long-delays-in-i2c-driver.patch
• 0012-OMAP3-Overo-allow-expansion-boards-with-any-vendor-I.patch
• 0013-OMAP3-Overo-change-address-of-expansion-eeprom-to-0x.patch
• 0014-OMAP3-board.c-don-t-attempt-to-set-up-second-RAM-ban.patch
• 0015-OMAP3-mem.c-enhance-the-RAM-test.patch
• 0016-env_nand.c-fail-gracefully-if-no-nand-is-present.patch
• 0017-OMAP3-add-definitions-to-support-sysinfo-cpu-and-cpu.patch
• 0018-OMAP3-sys_info-update-cpu-detection-for-36XX-37XX.patch
• 0019-OMAP3-clocks-update-clock-setup-for-36XX-37XX.patch
• 0020-OMAP3-beagle-add-support-for-Beagle-xM.patch
• 0021-OMAP3-Beagle-Overo-remove-omapfb.debug-y-from-defaul.patch
• 0022-OMAP3-beagle-implement-expansionboard-detection-base.patch
• 0023-beagleboard-display-message-about-I2C-errors-being-e.patch
• 0024-beagleboard-fix-TCT-expansionboard-IDs.patch
• 0025-Add-DSS-driver-for-OMAP3.patch
• 0026-Enable-DSS-driver-for-Beagle.patch
• 0027-beagleboardXM-don-t-set-mpurate-on-xM-in-bootargs.patch
• 0028-OMAP3-fix-and-clean-up-L2-cache-enable-disable-funct.patch
• 0029-OMAP3-convert-setup_auxcr-to-pure-asm.patch
• 0030-OMAP3-apply-Cortex-A8-errata-workarounds-only-on-aff.patch
• 0031-OMAP3-beagle-add-more-expansionboards-based-on-http-.patch
• 0032-OMAP3-beagle-set-mpurate-to-600-for-revB-and-revC1-3.patch
• 0033-OMAP3-beagle-prettify-expansionboard-message-a-bit.patch
• 0034-OMAP3-beagle-add-pinmux-for-Tincantools-Trainer-expa.patch
• 0035-OMAP3-Beagle-set-mpurate-to-1000-for-xM.patch
• 0036-OMAP3-Beagle-decrease-bootdelay-to-3-use-VGA-for-def.patch
• 0037-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch
• 0038-Added-configurations-for-xM-Rev-A-board.patch
• 0038-BeagleBoard-Added-LED-driver.patch
• 0039-Add-led-command.patch
• 0039-OMAP3-beagle-setenv-beaglerev-for-AxBx-Cx-xMA-for-be.patch
• 0040-BeagleBoard-Check-for-ramdisk-on-boot.patch
• 0041-BeagleBoard-Enabled-LEDs.patch
• 0042-BeagleBoard-New-command-for-status-of-USER-button.patch
• 0043-BeagleBoard-Add-CONFIG_SYS_MEMTEST_SCRATCH.patch