Index: linux-2.6.24.3/drivers/leds/Kconfig =================================================================== --- linux-2.6.24.3.orig/drivers/leds/Kconfig 2008-02-29 13:56:08.000000000 +0100 +++ linux-2.6.24.3/drivers/leds/Kconfig 2008-02-29 13:56:11.000000000 +0100 @@ -130,6 +130,15 @@ This allows LEDs to be controlled by a programmable timer via sysfs. If unsure, say Y. +config LEDS_TRIGGER_CPU_ACTIVITY + tristate "LED CPU Activity Trigger" + depends on LEDS_TRIGGERS + help + This allows LEDs to be set to show cpu activity via sysfs. + The LED will blink when the cpu is active and stay steady + (on or off according to the trigger selected) when idle. + Platform support is needed for this to work. If unsure, say Y. + config LEDS_TRIGGER_IDE_DISK bool "LED IDE Disk Trigger" depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK Index: linux-2.6.24.3/drivers/leds/ledtrig-cpu.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.24.3/drivers/leds/ledtrig-cpu.c 2008-02-29 13:56:11.000000000 +0100 @@ -0,0 +1,502 @@ +/* + * LEDs CPU activity trigger + * + * Author: John Bowler + * + * Copyright (c) 2006 John Bowler + * + * Permission is hereby granted, free of charge, to any + * person obtaining a copy of this software and associated + * documentation files (the "Software"), to deal in the + * Software without restriction, including without + * limitation the rights to use, copy, modify, merge, + * publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the + * following conditions: + * + * The above copyright notice and this permission notice + * shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF + * ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED + * TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT + * SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include "leds.h" + +//#include +//#include + + +/* + * To simplify this the LED state is given for each case of + * CPU state - idle or active. The LED can be: + * + * off + * flash - slow for idle, fast (flicker) for active + * on + * + * This gives two useless states - off/off and on/on + */ +typedef enum cpu_trigger_led_state { + cpu_led_off, + cpu_led_flash, + cpu_led_on, + cpu_led_invalid +} cpu_trigger_led_state; + +static const char *const cpu_trigger_names[] = { + "off", + "flash", + "on", + "invalid" +}; + +/* Forward declaration - this is called back when an LED property + * is changed. + */ +static void leds_cpu_trigger_state_change(void); + +/* + * These constants define the actual mark/space of the flashing + * in jiffies. msecs_to_jiffies rounds up and is compile time + * evaluable for constant arguments. Writing the ?: stuff below + * this way ensures the compiler doesn't think it needs to + * compile in the math of msecs_to_jiffies. + * + * These values have been determined by experiment to work well + * for the ready/status LED on a LinkSys NSLU2 (light piped) and + * for the user LED on a Loft (Gateway Avila variant) board where + * the LED was directly visible. Light Output Varies Everywhere. + */ +#define LEDS_CPU_ACTIVE_MARK msecs_to_jiffies(40) +#define LEDS_CPU_IDLE_MARK msecs_to_jiffies(800) +#define LEDS_CPU_ACTIVE_SPACE msecs_to_jiffies(60) +#define LEDS_CPU_IDLE_SPACE msecs_to_jiffies(800) + + +/* + * Individual LEDs ------------------------------------------------------------ + */ +struct cpu_trigger_data { + cpu_trigger_led_state active; /* Behaviour when the CPU is active. */ + cpu_trigger_led_state idle; /* Behaviour when the CPU is idle. */ +}; + +/* + * LED state change - called when the state of a single LED might + * have changed. Returns true if the LED is blinking. The argument + * is the blink state - the brightness of the blinking LED. + */ +static int leds_cpu_trigger_led_state_change(struct led_classdev *led, + int is_active, enum led_brightness brightness) +{ + int is_blinking = 0; + + struct cpu_trigger_data *data = led->trigger_data; + + /* Find the new brightness for the LED, if the LED is + * set to flash then the brightness passed in is the + * required value. + */ + if (likely(data != 0)) + switch (is_active ? data->active : data->idle) { + case cpu_led_off: brightness = LED_OFF; break; + case cpu_led_flash: is_blinking = 1; break; + case cpu_led_on: brightness = LED_FULL; break; + } + else + brightness = is_active ? LED_FULL : LED_OFF; + + led_set_brightness(led, brightness); + + return is_blinking; +} + +/* + * sysfs properties, the property is output at an list of the + * values with the current setting enclosed in [] + */ +static ssize_t leds_cpu_trigger_show_prop(struct device *dev, + struct device_attribute *attr, char *buf, size_t where) +{ + struct led_classdev *led = dev_get_drvdata(dev); + cpu_trigger_led_state item = cpu_led_invalid, i; + char *next; + + if (likely(led->trigger_data != 0)) + item = *(const cpu_trigger_led_state*)( + led->trigger_data + where); + + for (i=0, next=buf; i= size) + return rc; + + /* look for a simple match against the trigger name, case + * sensitive. + */ + do { + const char *name = cpu_trigger_names[value]; + size_t len = strlen(name); + if (len <= size && memcmp(buf+rc, name, len) == 0) { + rc = len; + break; + } + if (++value >= cpu_led_invalid) + return -EINVAL; + } while (1); + + led = dev_get_drvdata(dev); + if (likely(led->trigger_data != 0)) + *(cpu_trigger_led_state*)( + led->trigger_data + where) = value; + + return rc; +} + +static ssize_t leds_cpu_trigger_store_active(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + ssize_t rc = leds_cpu_trigger_store_prop(dev, attr, buf, size, + offsetof(struct cpu_trigger_data, active)); + /* + * At least one CPU must be active (otherwise who is doing this?) + * Call down into the global state below to cause an update + * to happen now. + */ + leds_cpu_trigger_state_change(); + return rc; +} + +static ssize_t leds_cpu_trigger_store_idle(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + return leds_cpu_trigger_store_prop(dev, attr, buf, size, + offsetof(struct cpu_trigger_data, idle)); +} + +static DEVICE_ATTR(active, 0644, leds_cpu_trigger_show_active, + leds_cpu_trigger_store_active); + +static DEVICE_ATTR(idle, 0644, leds_cpu_trigger_show_idle, + leds_cpu_trigger_store_idle); + +/* + * Activate and deactivate are called on individual LEDs when the + * LED trigger property is changed. + */ +static void leds_cpu_trigger_activate(struct led_classdev *led) +{ + /* + * The initial setting of the trigger is simple CPU activity + * with the LED off for idle and on for active. Consequently + * there is no need to mess with the global state initially, + * we know the CPU is active at this moment! + */ + int rc; + struct cpu_trigger_data *data = kmalloc(sizeof *data, GFP_KERNEL); + if (unlikely(data == 0)) + return; + + data->active = cpu_led_on; + data->idle = cpu_led_off; + led->trigger_data = data; + + rc = device_create_file(led->dev, &dev_attr_active); + if (rc) + goto err_out; + rc = device_create_file(led->dev, &dev_attr_idle); + if (rc) + goto err_out_active; + + led_set_brightness(led, LED_FULL); + return; + +err_out_active: + device_remove_file(led->dev, &dev_attr_active); +err_out: + led->trigger_data = NULL; + kfree(data); +} + +static void leds_cpu_trigger_deactivate(struct led_classdev *led) +{ + struct cpu_trigger_data *data = led->trigger_data; + if (likely(data != 0)) { + led_set_brightness(led, LED_OFF); + + device_remove_file(led->dev, &dev_attr_idle); + device_remove_file(led->dev, &dev_attr_active); + + led->trigger_data = 0; + kfree(data); + } +} + + +/* + * Global state -------------------------------------------------------------- + * + * This is global because the CPU state is global and we only need one timer to + * do this stuff. + */ +typedef struct leds_cpu_trigger_data { + struct led_trigger trigger; /* the lock in here protects everything */ + struct timer_list timer; + unsigned long last_active_time; /* record of last jiffies */ + unsigned long last_idle_time; /* record of last jiffies */ + int count_active; /* number of active CPUs */ +} leds_cpu_trigger_data; + +/* + * Mark state - uses the current time (jiffies) to work out + * whether this is a mark or space. + */ +static int leds_cpu_trigger_mark(struct leds_cpu_trigger_data *data, + unsigned long now) { + if (data->count_active > 0) { + unsigned long elapsed = now - data->last_active_time; + elapsed %= LEDS_CPU_ACTIVE_SPACE + LEDS_CPU_ACTIVE_MARK; + data->last_active_time = now - elapsed; + return elapsed > LEDS_CPU_ACTIVE_SPACE; + } else { + unsigned long elapsed = now - data->last_idle_time; + elapsed %= LEDS_CPU_IDLE_SPACE + LEDS_CPU_IDLE_MARK; + data->last_idle_time = now - elapsed; + return elapsed > LEDS_CPU_IDLE_SPACE; + } +} + + +/* + * State change - given information about the nature of the + * (possible) state change call up to each LED to adjust its + * state. Returns true if any LED is blinking. The lock + * must be held (a read lock is adequate). + */ +static int leds_cpu_trigger_scan_leds(struct leds_cpu_trigger_data *data, + unsigned long now) +{ + int blinking = 0; + const int active = data->count_active > 0; + const enum led_brightness brightness = + leds_cpu_trigger_mark(data, now) ? LED_FULL : LED_OFF; + struct list_head *entry; + + list_for_each(entry, &data->trigger.led_cdevs) { + struct led_classdev *led = + list_entry(entry, struct led_classdev, trig_list); + + blinking |= leds_cpu_trigger_led_state_change(led, + active, brightness); + } + + return blinking; +} + +/* + * Set the timer correctly according to the current state, the lock + * must be held for write. + */ +static void leds_cpu_trigger_set_timer(struct leds_cpu_trigger_data *state, + unsigned long now) +{ + unsigned long next; + if (state->count_active > 0) { + next = state->last_active_time; + if (now - next > LEDS_CPU_ACTIVE_SPACE) + next += LEDS_CPU_ACTIVE_MARK; + next += LEDS_CPU_ACTIVE_SPACE; + } else { + next = state->last_idle_time; + if (now - next > LEDS_CPU_IDLE_SPACE) + next += LEDS_CPU_IDLE_MARK; + next += LEDS_CPU_IDLE_SPACE; + } + mod_timer(&state->timer, next); +} + +/* + * The timer callback if the LED is currently flashing, the callback + * calls the state change function and, if that returns true, meaning + * that at least one LED is still blinking, the timer is restarted + * with the correct timeout. + */ +static void leds_cpu_trigger_timer_callback(unsigned long data) +{ + struct leds_cpu_trigger_data *state = + (struct leds_cpu_trigger_data *)data; + + write_lock(&state->trigger.leddev_list_lock); + { + unsigned long now = jiffies; + + /* If at least one LED is set to flash; set the timer + * again (this won't reset the timer set within the + * idle loop). + */ + if (leds_cpu_trigger_scan_leds(state, now)) + leds_cpu_trigger_set_timer(state, now); + } + write_unlock(&state->trigger.leddev_list_lock); +} + + +/* + * There is one global control structure, one timer and one set + * of state for active CPUs shared across all the LEDs. Individual + * LEDs say how this state to be handled. It is currently *not* + * possible to show per-cpu activity on individual LEDs, the code + * maintains a count of active CPUs and the state is only 'idle' + * if all CPUs are idle. + */ +static struct leds_cpu_trigger_data leds_cpu_trigger = { + .trigger = { + .name = "cpu", + .activate = leds_cpu_trigger_activate, + .deactivate = leds_cpu_trigger_deactivate, + } , + .timer = TIMER_INITIALIZER(leds_cpu_trigger_timer_callback, 0, + (unsigned long)&leds_cpu_trigger), + .last_active_time = 0, + .last_idle_time = 0, + .count_active = 0, +}; + +/* + * State change - callback from an individual LED on a property change which + * might require a redisplay. + */ +static void leds_cpu_trigger_state_change() { + write_lock(&leds_cpu_trigger.trigger.leddev_list_lock); + { + unsigned long now = jiffies; + + if (leds_cpu_trigger_scan_leds(&leds_cpu_trigger, now) && + !timer_pending(&leds_cpu_trigger.timer)) + leds_cpu_trigger_set_timer(&leds_cpu_trigger, now); + } + write_unlock(&leds_cpu_trigger.trigger.leddev_list_lock); +} + +/* + * Called from every CPU at the start and end of the idle loop. + * The active count is initially 0, even though CPUs are running, + * so the code below must check for the resultant underflow. + * + * If the idle behaviour is 'flash' then when the timer times out + * it will take the CPU out of idle, set the active state (which + * may also be flash), drop back into idle and reset the timer to + * the idle timeout... + */ +static void leds_cpu_trigger_idle(int is_idle) +{ + write_lock(&leds_cpu_trigger.trigger.leddev_list_lock); + if ((is_idle && leds_cpu_trigger.count_active > 0 && + --leds_cpu_trigger.count_active == 0) || + (!is_idle && leds_cpu_trigger.count_active < num_online_cpus() && + ++leds_cpu_trigger.count_active == 1)) { + unsigned long now = jiffies; + + /* State change - the system just became idle or active, + * call the del_timer first in an attempt to minimise + * getting a timer interrupt which will take us unnecessarily + * out of idle (this doesn't matter). + */ + del_timer(&leds_cpu_trigger.timer); + if (leds_cpu_trigger_scan_leds(&leds_cpu_trigger, now)) + leds_cpu_trigger_set_timer(&leds_cpu_trigger, now); + } + write_unlock(&leds_cpu_trigger.trigger.leddev_list_lock); +} + +/* + * Module init and exit - register the trigger, then store + * the idle callback in the arch-specific global. For this + * module to link (into the kernel) or load (into a running + * kernel) the architecture must define the leds_idle global. + */ +static int __init leds_cpu_trigger_init(void) +{ + int rc = led_trigger_register(&leds_cpu_trigger.trigger); + leds_idle = leds_cpu_trigger_idle; + return rc; +} +module_init(leds_cpu_trigger_init); + +static void __exit leds_cpu_trigger_exit(void) +{ + leds_idle = 0; + del_timer_sync(&leds_cpu_trigger.timer); + led_trigger_unregister(&leds_cpu_trigger.trigger); +} +module_exit(leds_cpu_trigger_exit); + +MODULE_AUTHOR("John Bowler "); +MODULE_DESCRIPTION("CPU activity LED trigger"); +MODULE_LICENSE("Dual MIT/GPL"); Index: linux-2.6.24.3/drivers/leds/Makefile =================================================================== --- linux-2.6.24.3.orig/drivers/leds/Makefile 2008-02-29 13:56:08.000000000 +0100 +++ linux-2.6.24.3/drivers/leds/Makefile 2008-02-29 13:56:11.000000000 +0100 @@ -24,3 +24,4 @@ obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o +obj-$(CONFIG_LEDS_TRIGGER_CPU_ACTIVITY) += ledtrig-cpu.o Index: linux-2.6.24.3/include/linux/leds.h =================================================================== --- linux-2.6.24.3.orig/include/linux/leds.h 2008-02-29 13:56:08.000000000 +0100 +++ linux-2.6.24.3/include/linux/leds.h 2008-02-29 13:56:11.000000000 +0100 @@ -124,4 +124,13 @@ }; +/* + * CPU activity indication. + */ +/* Idle callback - call with is_idle==1 at the start of the idle loop + * and with is_idle==0 at the end. This symbol must be defined by + * the arch core to be able to use LEDS_TRIGGER_CPU_ACTIVITY + */ +extern void (*leds_idle)(int is_idle); + #endif /* __LINUX_LEDS_H_INCLUDED */