From caa6d93d406fa836c8af84268f0ed7391434f1ee Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Sun, 14 Feb 2010 12:52:02 +0100 Subject: [PATCH 26/43] board-overo: add PM code and sync with http://www.sakoman.com/cgi-bin/gitweb.cgi?p=linux-omap-2.6.git;a=shortlog;h=refs/heads/omap3-2.6.32 --- arch/arm/mach-omap2/board-overo.c | 274 ++++++++++++++++++++++++++++++++----- 1 files changed, 242 insertions(+), 32 deletions(-) diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 9c76588..2595f81 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -40,16 +41,24 @@ #include #include +#include #include #include #include #include +#include #include - -#include "mux.h" +#include +#include + #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" +#include "mux.h" + +#include "pm.h" +#include "omap3-opp.h" + #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 #define OVERO_GPIO_PENDOWN 114 @@ -95,18 +104,6 @@ static struct ads7846_platform_data ads7846_config = { .keep_vref_on = 1, }; -static struct spi_board_info overo_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), - .platform_data = &ads7846_config, - } -}; - static void __init overo_ads7846_init(void) { if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) && @@ -116,9 +113,6 @@ static void __init overo_ads7846_init(void) printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n"); return; } - - spi_register_board_info(overo_spi_board_info, - ARRAY_SIZE(overo_spi_board_info)); } #else @@ -234,6 +228,169 @@ static inline void __init overo_init_smsc911x(void) static inline void __init overo_init_smsc911x(void) { return; } #endif +/* DSS */ +static int lcd_enabled; +static int dvi_enabled; + +#define OVERO_GPIO_LCD_EN 144 +#define OVERO_GPIO_LCD_BL 145 + +static void __init overo_display_init(void) +{ + if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) && + (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0)) + gpio_export(OVERO_GPIO_LCD_EN, 0); + else + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_LCD_EN\n"); + + if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) && + (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0)) + gpio_export(OVERO_GPIO_LCD_BL, 0); + else + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_LCD_BL\n"); +} + +static int overo_panel_enable_dvi(struct omap_dss_device *dssdev) +{ + if (lcd_enabled) { + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); + return -EINVAL; + } + dvi_enabled = 1; + + return 0; +} + +static void overo_panel_disable_dvi(struct omap_dss_device *dssdev) +{ + dvi_enabled = 0; +} + +static struct omap_dss_device overo_dvi_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .driver_name = "generic_panel", + .phy.dpi.data_lines = 24, + .platform_enable = overo_panel_enable_dvi, + .platform_disable = overo_panel_disable_dvi, +}; + +static int overo_panel_enable_tv(struct omap_dss_device *dssdev) +{ +#define ENABLE_VDAC_DEDICATED 0x03 +#define ENABLE_VDAC_DEV_GRP 0x20 + + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + ENABLE_VDAC_DEDICATED, + TWL4030_VDAC_DEDICATED); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); + + return 0; +} + +static void overo_panel_disable_tv(struct omap_dss_device *dssdev) +{ + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, + TWL4030_VDAC_DEDICATED); + twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, + TWL4030_VDAC_DEV_GRP); +} + +static struct omap_dss_device overo_tv_device = { + .name = "tv", + .driver_name = "venc", + .type = OMAP_DISPLAY_TYPE_VENC, + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, + .platform_enable = overo_panel_enable_tv, + .platform_disable = overo_panel_disable_tv, +}; + +static int overo_panel_enable_lcd(struct omap_dss_device *dssdev) +{ + if (dvi_enabled) { + printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); + return -EINVAL; + } + + gpio_set_value(OVERO_GPIO_LCD_EN, 1); + gpio_set_value(OVERO_GPIO_LCD_BL, 1); + lcd_enabled = 1; + return 0; +} + +static void overo_panel_disable_lcd(struct omap_dss_device *dssdev) +{ + gpio_set_value(OVERO_GPIO_LCD_EN, 0); + gpio_set_value(OVERO_GPIO_LCD_BL, 0); + lcd_enabled = 0; +} + +#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ + defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) +static struct omap_dss_device overo_lcd35_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "lcd35", + .driver_name = "lgphilips_lb035q02_panel", + .phy.dpi.data_lines = 24, + .panel.recommended_bpp = 16, + .platform_enable = overo_panel_enable_lcd, + .platform_disable = overo_panel_disable_lcd, +}; +#endif + +#if defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) || \ + defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C_MODULE) +static struct omap_dss_device overo_lcd43_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "lcd43", + .driver_name = "samsung_lte_panel", + .phy.dpi.data_lines = 24, + .panel.recommended_bpp = 16, + .platform_enable = overo_panel_enable_lcd, + .platform_disable = overo_panel_disable_lcd, +}; +#endif + +static struct omap_dss_device *overo_dss_devices[] = { + &overo_dvi_device, + &overo_tv_device, +#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ + defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) + &overo_lcd35_device, +#endif +#if defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) || \ + defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C_MODULE) + &overo_lcd43_device, +#endif +}; + +static struct omap_dss_board_info overo_dss_data = { + .num_devices = ARRAY_SIZE(overo_dss_devices), + .devices = overo_dss_devices, + .default_device = &overo_dvi_device, +}; + +static struct platform_device overo_dss_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &overo_dss_data, + }, +}; + +static struct regulator_consumer_supply overo_vdda_dac_supply = { + .supply = "vdda_dac", + .dev = &overo_dss_device.dev, +}; + +static struct regulator_consumer_supply overo_vdds_dsi_supply = { + .supply = "vdds_dsi", + .dev = &overo_dss_device.dev, +}; + static struct mtd_partition overo_nand_partitions[] = { { .name = "xloader", @@ -379,6 +536,37 @@ static struct regulator_init_data overo_vmmc1 = { .consumer_supplies = &overo_vmmc1_supply, }; +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data overo_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &overo_vdda_dac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data overo_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &overo_vdds_dsi_supply, +}; + +/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */ + static struct twl4030_codec_audio_data overo_audio_data = { .audio_mclk = 26000000, }; @@ -402,6 +590,8 @@ static struct twl4030_platform_data overo_twldata = { .usb = &overo_usb_data, .codec = &overo_codec_data, .vmmc1 = &overo_vmmc1, + .vdac = &overo_vdac, + .vpll2 = &overo_vpll2, }; static struct i2c_board_info __initdata overo_i2c_boardinfo[] = { @@ -422,31 +612,50 @@ static int __init overo_i2c_init(void) return 0; } -static struct platform_device overo_lcd_device = { - .name = "overo_lcd", - .id = -1, -}; - -static struct omap_lcd_config overo_lcd_config __initdata = { - .ctrl_name = "internal", +static struct spi_board_info overo_spi_board_info[] __initdata = { +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + { + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), + .platform_data = &ads7846_config, + }, +#endif +#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ + defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) + { + .modalias = "lgphilips_lb035q02_panel-spi", + .bus_num = 1, + .chip_select = 1, + .max_speed_hz = 500000, + .mode = SPI_MODE_3, + }, +#endif }; -static struct omap_board_config_kernel overo_config[] __initdata = { - { OMAP_TAG_LCD, &overo_lcd_config }, -}; +static int __init overo_spi_init(void) +{ + overo_ads7846_init(); + spi_register_board_info(overo_spi_board_info, + ARRAY_SIZE(overo_spi_board_info)); + return 0; +} static void __init overo_init_irq(void) { - omap_board_config = overo_config; - omap_board_config_size = ARRAY_SIZE(overo_config); omap2_init_common_hw(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params, NULL, NULL, NULL); + NULL, omap35x_mpu_rate_table, + omap35x_dsp_rate_table, omap35x_l3_rate_table); omap_init_irq(); omap_gpio_init(); } static struct platform_device *overo_devices[] __initdata = { - &overo_lcd_device, + &overo_dss_device, }; static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { @@ -477,8 +686,9 @@ static void __init overo_init(void) overo_flash_init(); usb_musb_init(); usb_ehci_init(&ehci_pdata); - overo_ads7846_init(); + overo_spi_init(); overo_init_smsc911x(); + overo_display_init(); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); -- 1.6.6.1