From 2be74286ea90595a7ab3fc36fc3ce2d9a2696a35 Mon Sep 17 00:00:00 2001 From: Steve Sakoman Date: Sun, 24 Jan 2010 09:33:56 -0800 Subject: [PATCH 25/30] ARM: OMAP2: mmc-twl4030: move clock input selection prior to vcc test otherwise it is not executed on systems that use non-twl regulators --- arch/arm/mach-omap2/mmc-twl4030.c | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 0c3c72d..dbdafb9 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -302,6 +302,14 @@ static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int v if (c == NULL) return -ENODEV; + if (mmc->slots[0].internal_clock) { + u32 reg; + + reg = omap_ctrl_readl(control_devconf1_offset); + reg |= OMAP2_MMCSDIO2ADPCLKISEL; + omap_ctrl_writel(reg, control_devconf1_offset); + } + /* If we don't see a Vcc regulator, assume it's a fixed * voltage always-on regulator. */ @@ -322,14 +330,6 @@ static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int v * chips/cards need an interface voltage rail too. */ if (power_on) { - /* only MMC2 supports a CLKIN */ - if (mmc->slots[0].internal_clock) { - u32 reg; - - reg = omap_ctrl_readl(control_devconf1_offset); - reg |= OMAP2_MMCSDIO2ADPCLKISEL; - omap_ctrl_writel(reg, control_devconf1_offset); - } ret = mmc_regulator_set_ocr(c->vcc, vdd); /* enable interface voltage rail, if needed */ if (ret == 0 && c->vcc_aux) { -- 1.6.6.1