From 416c7ba6ec7041dc4d61340adf73c9467ff8073a Mon Sep 17 00:00:00 2001
From: Koen Kooi <koen@beagleboard.org>
Date: Wed, 23 Sep 2009 09:35:15 +0200
Subject: [PATCH] ARM: OMAP: Fix beagleboard EHCI setup
The EHCI configuration in the beagleboard board file was copy/pasted
from the sdp one and hence wrong. The beagleboard only used one port
and lacks a charge pump.
Tested on revision C1D and C3 boards
Signed-off-by: Koen Kooi <koen@beagleboard.org>
---
arch/arm/mach-omap2/board-omap3beagle.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 496b4a0..aa403e6 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -406,10 +406,10 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
- .chargepump = true,
+ .chargepump = false,
.phy_reset = true,
- .reset_gpio_port[0] = 57,
- .reset_gpio_port[1] = 61,
+ .reset_gpio_port[0] = -EINVAL,
+ .reset_gpio_port[1] = 147,
.reset_gpio_port[2] = -EINVAL
};
--
1.6.2.4