From ba59a0812ba0e223bd0af8f4dea6c971b6289696 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Thu, 2 Apr 2009 12:07:08 -0700 Subject: [PATCH] musb: use dma mode 1 for TX if transfer size equals maxpacket (v2) Currently, with Inventra DMA, we use Mode 0 if transfer size is less than or equal to the endpoint's maxpacket size. This requires that we explicitly set TXPKTRDY for that transfer. However the musb_g_tx code will not set TXPKTRDY twice if the last transfer is exactly equal to maxpacket, even if request->zero is set. Using Mode 1 will solve this; a better fix might be in musb_g_tx(). Without this change, musb will not correctly send out a ZLP if the last transfer is the maxpacket size and request->zero is set. Signed-off-by: Anand Gadiyar Signed-off-by: David Brownell --- drivers/usb/musb/musb_gadget.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index bc197b2..e8f920c 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -310,7 +310,7 @@ static void txstate(struct musb *musb, struct musb_request *req) /* setup DMA, then program endpoint CSR */ request_size = min(request->length, musb_ep->dma->max_len); - if (request_size <= musb_ep->packet_sz) + if (request_size < musb_ep->packet_sz) musb_ep->dma->desired_mode = 0; else musb_ep->dma->desired_mode = 1; -- 1.6.0.4