Subject: [PATCH 5/7] Kconfig and Makefile changes for vpfe capture driver From: m-karicheri2-l0cyMroinI0@public.gmane.org Date: Fri, 13 Mar 2009 17:23:32 -0400 To: davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org, davinci_opensource_ccb-uAqBSO/uNfhBDgjK7y7TUQ@public.gmane.org, psp_video-uAqBSO/uNfhBDgjK7y7TUQ@public.gmane.org Newsgroups: gmane.linux.davinci Adding updates to video Kconfig and Makefile and adding Makefile for building vpfe-capture files Signed-off-by: Murali Karicheri <m-karicheri2-l0cyMroinI0@public.gmane.org> --- drivers/media/video/Kconfig | 48 ++++++++++++++++++++++++---------- drivers/media/video/Makefile | 6 +--- drivers/media/video/davinci/Makefile | 8 +++++ 3 files changed, 43 insertions(+), 19 deletions(-) create mode 100644 drivers/media/video/davinci/Makefile diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 1dd98d8..ea3a526 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -485,25 +485,45 @@ config VIDEO_VIVI Say Y here if you want to test video apps or debug V4L devices. In doubt, say N. -config VIDEO_TVP5146 - tristate "TVP5146 video decoder" - depends on I2C && ARCH_DAVINCI +config VIDEO_VPFE_CAPTURE + tristate "VPFE Video Capture Driver" + depends on VIDEO_V4L2 && ARCH_DAVINCI + select VIDEOBUF_DMA_CONTIG help - Support for I2C bus based TVP5146 configuration. + Support for DMXXXX VPFE based frame grabber. This is the + common V4L2 module for following DMXXX SoCs from Texas + Instruments:- DM6446 & DM355. To compile this driver as a module, choose M here: the - module will be called tvp5146. + module will be called vpfe-capture. -config VIDEO_DAVINCI - tristate "Davinci Video Capture" - depends on VIDEO_DEV && VIDEO_TVP5146 && ARCH_DAVINCI - select VIDEOBUF_GEN - select VIDEOBUF_DMA_SG +config VIDEO_DAVINCI_CCDC + tristate "DM6446 CCDC HW module" + depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE + default y help - Support for Davinci based frame grabber through CCDC. - - To compile this driver as a module, choose M here: the - module will be called vpfe. + Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from slave decoders. + + To compile this driver as a module, choose M here: the + module will be called vpfe. + +config VIDEO_DM355_CCDC + tristate "DM355 CCDC HW module" + depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE + default y + help + Enables DM355 CCD hw module. DM355 CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from a slave decoders + + To compile this driver as a module, choose M here: the + module will be called vpfe. source "drivers/media/video/bt8xx/Kconfig" diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 863b5c8..f8b6c0c 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -10,8 +10,6 @@ stkwebcam-objs := stk-webcam.o stk-sensor.o omap2cam-objs := omap24xxcam.o omap24xxcam-dma.o -davinci-vpfe-objs := ccdc_davinci.o davinci_vpfe.o - videodev-objs := v4l2-dev.o v4l2-ioctl.o videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o v4l2-subdev.o @@ -29,6 +27,7 @@ endif obj-$(CONFIG_VIDEO_TUNER) += tuner.o +obj-$(CONFIG_ARCH_DAVINCI) += davinci/ obj-$(CONFIG_VIDEO_BT848) += bt8xx/ obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o @@ -135,9 +134,6 @@ obj-$(CONFIG_USB_S2255) += s2255drv.o obj-$(CONFIG_VIDEO_IVTV) += ivtv/ obj-$(CONFIG_VIDEO_CX18) += cx18/ -obj-$(CONFIG_VIDEO_DAVINCI) += davinci-vpfe.o -obj-$(CONFIG_VIDEO_TVP5146) += tvp5146.o - obj-$(CONFIG_VIDEO_VIVI) += vivi.o obj-$(CONFIG_VIDEO_CX23885) += cx23885/ diff --git a/drivers/media/video/davinci/Makefile b/drivers/media/video/davinci/Makefile new file mode 100644 index 0000000..77fe038 --- /dev/null +++ b/drivers/media/video/davinci/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the davinci video device drivers. +# + +# Capture: DaVinci and DM355 +obj-$(CONFIG_VIDEO_DAVINCI_CCDC) += ccdc_davinci.o +obj-$(CONFIG_VIDEO_DM355_CCDC) += ccdc_dm355.o +obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o -- 1.6.0.4