Index: linux-2.6.29/arch/powerpc/platforms/83xx/mpc831x_rdb.c
===================================================================
--- linux-2.6.29.orig/arch/powerpc/platforms/83xx/mpc831x_rdb.c	2009-03-24 00:12:14.000000000 +0100
+++ linux-2.6.29/arch/powerpc/platforms/83xx/mpc831x_rdb.c	2009-04-01 17:37:53.000000000 +0200
@@ -15,17 +15,87 @@
 
 #include <linux/pci.h>
 #include <linux/of_platform.h>
+#include <linux/spi/spi.h>
 
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+#include <linux/interrupt.h>
 
 #include "mpc83xx.h"
 
 /*
  * Setup the architecture
  */
+struct gpio {
+	__be32 gpdir;
+	__be32 gpodr;
+	__be32 gpdat;
+	__be32 gpier;
+	__be32 gpimr;
+	__be32 gpicr;
+} __attribute__ ((packed));
+static struct gpio *gpio_regs;
+
+static void mpc83xx_spi_activate_cs(u8 cs, u8 polarity)
+{
+	//printk(KERN_INFO "%s %d %d\n", __func__, cs, polarity);
+	if (polarity)
+		setbits32(&gpio_regs->gpdat, 1 << (31 - 14));
+	else
+		clrbits32(&gpio_regs->gpdat, 1 << (31 - 14));
+}
+
+static void mpc83xx_spi_deactivate_cs(u8 cs, u8 polarity)
+{
+//printk(KERN_INFO "%s %d %d\n", __func__, cs, polarity);
+	if (polarity)
+		clrbits32(&gpio_regs->gpdat, 1 << (31 - 14));
+	else
+		setbits32(&gpio_regs->gpdat, 1 << (31 - 14));
+
+}
+
+//static struct mmc_spi_platform_data mpc8313_mmc_pdata = {
+//	.ocr_mask = MMC_VDD_33_34,
+//};
+
+static struct spi_board_info mpc8313_spi_boardinfo = {
+	.bus_num = 0x7000,
+	.chip_select = 0,
+	.max_speed_hz = 50000000,
+	.modalias = "spidev",
+//	.platform_data = &mpc8313_mmc_pdata,
+};
+
+static int __init mpc8313_spi_init(void)
+{
+	__be32 __iomem *psicrl;
+
+	/* System I/O Configuration Register Low */
+	psicrl = ioremap(get_immrbase() + MPC83XX_SICRL_OFFS, 0x4);
+	gpio_regs = ioremap(get_immrbase() + 0xc00, 0x20);
+	if (!psicrl || !gpio_regs)
+		return -ENOMEM;
+
+	clrbits32(psicrl, 0x03F00000);
+	setbits32(psicrl, 0x30000000);
+	iounmap(psicrl);
+
+	/* set GPIO13 as output */
+	setbits32(&gpio_regs->gpdir, 1 << (31 - 14));
+	clrbits32(&gpio_regs->gpodr, 1 << (31 - 14));
+	setbits32(&gpio_regs->gpdat, 1 << (31 - 14));
+
+	return fsl_spi_init(&mpc8313_spi_boardinfo, 1,
+			mpc83xx_spi_activate_cs,
+			mpc83xx_spi_deactivate_cs);
+}
+
+device_initcall(mpc8313_spi_init);
+
 static void __init mpc831x_rdb_setup_arch(void)
 {
 #ifdef CONFIG_PCI
@@ -40,6 +110,8 @@
 		mpc83xx_add_bridge(np);
 #endif
 	mpc831x_usb_cfg();
+
+	mpc8313_spi_init();
 }
 
 static void __init mpc831x_rdb_init_IRQ(void)
Index: linux-2.6.29/drivers/spi/spi_mpc83xx.c
===================================================================
--- linux-2.6.29.orig/drivers/spi/spi_mpc83xx.c	2009-03-24 00:12:14.000000000 +0100
+++ linux-2.6.29/drivers/spi/spi_mpc83xx.c	2009-04-01 17:37:53.000000000 +0200
@@ -280,7 +280,9 @@
 	if (pm)
 		pm--;
 
-	cs->hw_mode |= SPMODE_PM(pm);
+	cs->hw_mode = 0x0F700000;
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode,cs->hw_mode);
+
 	regval =  mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
 	if (cs->hw_mode != regval) {
 		unsigned long flags;
@@ -448,7 +450,7 @@
 	cs->hw_mode = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
 	/* mask out bits we are going to set */
 	cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH
-			 | SPMODE_REV | SPMODE_LOOP);
+			 | SPMODE_REV );
 
 	if (spi->mode & SPI_CPHA)
 		cs->hw_mode |= SPMODE_CP_BEGIN_EDGECLK;
@@ -456,8 +458,10 @@
 		cs->hw_mode |= SPMODE_CI_INACTIVEHIGH;
 	if (!(spi->mode & SPI_LSB_FIRST))
 		cs->hw_mode |= SPMODE_REV;
-	if (spi->mode & SPI_LOOP)
-		cs->hw_mode |= SPMODE_LOOP;
+
+	cs->hw_mode = 0x0F700000;
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode,cs->hw_mode);
+	cs->hw_mode = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
 
 	retval = mpc83xx_spi_setup_transfer(spi, NULL);
 	if (retval < 0) {
@@ -637,7 +641,7 @@
 	INIT_LIST_HEAD(&mpc83xx_spi->queue);
 
 	mpc83xx_spi->workqueue = create_singlethread_workqueue(
-		master->dev.parent->bus_id);
+			dev->dev.bus_id);
 	if (mpc83xx_spi->workqueue == NULL) {
 		ret = -EBUSY;
 		goto free_irq;