diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/alpha/include/asm/barrier.h linux-2.6.30-rc4-git/arch/alpha/include/asm/barrier.h --- linux-2.6.30-rc4/arch/alpha/include/asm/barrier.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/alpha/include/asm/barrier.h 2009-05-13 09:46:19.000000000 +0200 @@ -16,11 +16,13 @@ __asm__ __volatile__("wmb": : :"memory") __asm__ __volatile__("mb": : :"memory") #ifdef CONFIG_SMP +#define __ASM_SMP_MB "\tmb\n" #define smp_mb() mb() #define smp_rmb() rmb() #define smp_wmb() wmb() #define smp_read_barrier_depends() read_barrier_depends() #else +#define __ASM_SMP_MB #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/alpha/include/asm/futex.h linux-2.6.30-rc4-git/arch/alpha/include/asm/futex.h --- linux-2.6.30-rc4/arch/alpha/include/asm/futex.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/alpha/include/asm/futex.h 2009-05-13 09:46:19.000000000 +0200 @@ -1,6 +1,116 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H +#ifndef _ASM_ALPHA_FUTEX_H +#define _ASM_ALPHA_FUTEX_H -#include +#ifdef __KERNEL__ -#endif +#include +#include +#include +#include + +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ + __asm__ __volatile__( \ + __ASM_SMP_MB \ + "1: ldl_l %0,0(%2)\n" \ + insn \ + "2: stl_c %1,0(%2)\n" \ + " beq %1,4f\n" \ + " mov $31,%1\n" \ + "3: .subsection 2\n" \ + "4: br 1b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .long 1b-.\n" \ + " lda $31,3b-1b(%1)\n" \ + " .long 2b-.\n" \ + " lda $31,3b-2b(%1)\n" \ + " .previous\n" \ + : "=&r" (oldval), "=&r"(ret) \ + : "r" (uaddr), "r"(oparg) \ + : "memory") + +static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + __futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ADD: + __futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_XOR: + __futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + int prev, cmp; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + __asm__ __volatile__ ( + __ASM_SMP_MB + "1: ldl_l %0,0(%2)\n" + " cmpeq %0,%3,%1\n" + " beq %1,3f\n" + " mov %4,%1\n" + "2: stl_c %1,0(%2)\n" + " beq %1,4f\n" + "3: .subsection 2\n" + "4: br 1b\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + " .long 1b-.\n" + " lda $31,3b-1b(%0)\n" + " .long 2b-.\n" + " lda $31,3b-2b(%0)\n" + " .previous\n" + : "=&r"(prev), "=&r"(cmp) + : "r"(uaddr), "r"((long)oldval), "r"(newval) + : "memory"); + + return prev; +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_ALPHA_FUTEX_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/alpha/include/asm/uaccess.h linux-2.6.30-rc4-git/arch/alpha/include/asm/uaccess.h --- linux-2.6.30-rc4/arch/alpha/include/asm/uaccess.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/alpha/include/asm/uaccess.h 2009-05-13 09:46:19.000000000 +0200 @@ -507,5 +507,7 @@ struct exception_table_entry (pc) + (_fixup)->fixup.bits.nextinsn; \ }) +#define ARCH_HAS_SORT_EXTABLE +#define ARCH_HAS_SEARCH_EXTABLE #endif /* __ALPHA_UACCESS_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/alpha/kernel/binfmt_loader.c linux-2.6.30-rc4-git/arch/alpha/kernel/binfmt_loader.c --- linux-2.6.30-rc4/arch/alpha/kernel/binfmt_loader.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/alpha/kernel/binfmt_loader.c 2009-05-13 09:46:19.000000000 +0200 @@ -46,6 +46,6 @@ static struct linux_binfmt loader_format static int __init init_loader_binfmt(void) { - return register_binfmt(&loader_format); + return insert_binfmt(&loader_format); } arch_initcall(init_loader_binfmt); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/alpha/kernel/err_ev6.c linux-2.6.30-rc4-git/arch/alpha/kernel/err_ev6.c --- linux-2.6.30-rc4/arch/alpha/kernel/err_ev6.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/alpha/kernel/err_ev6.c 2009-05-13 09:46:19.000000000 +0200 @@ -229,7 +229,7 @@ ev6_process_logout_frame(struct el_commo } void -ev6_machine_check(u64 vector, u64 la_ptr) +ev6_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/alpha/kernel/err_ev7.c linux-2.6.30-rc4-git/arch/alpha/kernel/err_ev7.c --- linux-2.6.30-rc4/arch/alpha/kernel/err_ev7.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/alpha/kernel/err_ev7.c 2009-05-13 09:46:19.000000000 +0200 @@ -117,7 +117,7 @@ ev7_collect_logout_frame_subpackets(stru } void -ev7_machine_check(u64 vector, u64 la_ptr) +ev7_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr; char *saved_err_prefix = err_print_prefix; @@ -246,7 +246,7 @@ ev7_process_pal_subpacket(struct el_subp switch(header->type) { case EL_TYPE__PAL__LOGOUT_FRAME: - printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n", + printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n", err_print_prefix, packet->by_type.logout.whami, packet->by_type.logout.rbox_whami); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/alpha/kernel/err_impl.h linux-2.6.30-rc4-git/arch/alpha/kernel/err_impl.h --- linux-2.6.30-rc4/arch/alpha/kernel/err_impl.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/alpha/kernel/err_impl.h 2009-05-13 09:46:19.000000000 +0200 @@ -60,26 +60,26 @@ extern struct ev7_lf_subpackets * ev7_collect_logout_frame_subpackets(struct el_subpacket *, struct ev7_lf_subpackets *); extern void ev7_register_error_handlers(void); -extern void ev7_machine_check(u64, u64); +extern void ev7_machine_check(unsigned long, unsigned long); /* * err_ev6.c */ extern void ev6_register_error_handlers(void); extern int ev6_process_logout_frame(struct el_common *, int); -extern void ev6_machine_check(u64, u64); +extern void ev6_machine_check(unsigned long, unsigned long); /* * err_marvel.c */ -extern void marvel_machine_check(u64, u64); +extern void marvel_machine_check(unsigned long, unsigned long); extern void marvel_register_error_handlers(void); /* * err_titan.c */ extern int titan_process_logout_frame(struct el_common *, int); -extern void titan_machine_check(u64, u64); +extern void titan_machine_check(unsigned long, unsigned long); extern void titan_register_error_handlers(void); extern int privateer_process_logout_frame(struct el_common *, int); -extern void privateer_machine_check(u64, u64); +extern void privateer_machine_check(unsigned long, unsigned long); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/alpha/kernel/err_marvel.c linux-2.6.30-rc4-git/arch/alpha/kernel/err_marvel.c --- linux-2.6.30-rc4/arch/alpha/kernel/err_marvel.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/alpha/kernel/err_marvel.c 2009-05-13 09:46:19.000000000 +0200 @@ -1042,7 +1042,7 @@ marvel_process_logout_frame(struct ev7_l } void -marvel_machine_check(u64 vector, u64 la_ptr) +marvel_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr; int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/alpha/kernel/err_titan.c linux-2.6.30-rc4-git/arch/alpha/kernel/err_titan.c --- linux-2.6.30-rc4/arch/alpha/kernel/err_titan.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/alpha/kernel/err_titan.c 2009-05-13 09:46:19.000000000 +0200 @@ -380,7 +380,7 @@ titan_process_logout_frame(struct el_com } void -titan_machine_check(u64 vector, u64 la_ptr) +titan_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; struct el_TITAN_sysdata_mcheck *tmchk = @@ -702,7 +702,7 @@ privateer_process_logout_frame(struct el } void -privateer_machine_check(u64 vector, u64 la_ptr) +privateer_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; struct el_TITAN_sysdata_mcheck *tmchk = diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/alpha/kernel/Makefile linux-2.6.30-rc4-git/arch/alpha/kernel/Makefile --- linux-2.6.30-rc4/arch/alpha/kernel/Makefile 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/alpha/kernel/Makefile 2009-05-13 09:46:19.000000000 +0200 @@ -8,7 +8,7 @@ EXTRA_CFLAGS := -Werror -Wno-sign-compar obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \ irq_alpha.o signal.o setup.o ptrace.o time.o \ - alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o + alpha_ksyms.o systbls.o err_common.o io.o obj-$(CONFIG_VGA_HOSE) += console.o obj-$(CONFIG_SMP) += smp.o @@ -43,6 +43,10 @@ else # Misc support obj-$(CONFIG_ALPHA_SRM) += srmcons.o +ifdef CONFIG_BINFMT_AOUT +obj-y += binfmt_loader.o +endif + # Core logic support obj-$(CONFIG_ALPHA_APECS) += core_apecs.o obj-$(CONFIG_ALPHA_CIA) += core_cia.o diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/alpha/kernel/proto.h linux-2.6.30-rc4-git/arch/alpha/kernel/proto.h --- linux-2.6.30-rc4/arch/alpha/kernel/proto.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/alpha/kernel/proto.h 2009-05-13 09:46:19.000000000 +0200 @@ -36,7 +36,6 @@ extern void cia_pci_tbi(struct pci_contr extern struct pci_ops irongate_pci_ops; extern int irongate_pci_clr_err(void); extern void irongate_init_arch(void); -extern void irongate_machine_check(u64, u64); #define irongate_pci_tbi ((void *)0) /* core_lca.c */ @@ -49,7 +48,7 @@ extern void lca_pci_tbi(struct pci_contr extern struct pci_ops marvel_pci_ops; extern void marvel_init_arch(void); extern void marvel_kill_arch(int); -extern void marvel_machine_check(u64, u64); +extern void marvel_machine_check(unsigned long, unsigned long); extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern int marvel_pa_to_nid(unsigned long); extern int marvel_cpuid_to_nid(int); @@ -86,7 +85,7 @@ extern void t2_pci_tbi(struct pci_contro extern struct pci_ops titan_pci_ops; extern void titan_init_arch(void); extern void titan_kill_arch(int); -extern void titan_machine_check(u64, u64); +extern void titan_machine_check(unsigned long, unsigned long); extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct _alpha_agp_info *titan_agp_info(void); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/alpha/mm/extable.c linux-2.6.30-rc4-git/arch/alpha/mm/extable.c --- linux-2.6.30-rc4/arch/alpha/mm/extable.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/alpha/mm/extable.c 2009-05-13 09:46:19.000000000 +0200 @@ -3,11 +3,49 @@ */ #include +#include #include +static inline unsigned long ex_to_addr(const struct exception_table_entry *x) +{ + return (unsigned long)&x->insn + x->insn; +} + +static void swap_ex(void *a, void *b, int size) +{ + struct exception_table_entry *ex_a = a, *ex_b = b; + unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b); + unsigned int t = ex_a->fixup.unit; + + ex_a->fixup.unit = ex_b->fixup.unit; + ex_b->fixup.unit = t; + ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn); + ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn); +} + +/* + * The exception table needs to be sorted so that the binary + * search that we use to find entries in it works properly. + * This is used both for the kernel exception table and for + * the exception tables of modules that get loaded. + */ +static int cmp_ex(const void *a, const void *b) +{ + const struct exception_table_entry *x = a, *y = b; + + /* avoid overflow */ + if (ex_to_addr(x) > ex_to_addr(y)) + return 1; + if (ex_to_addr(x) < ex_to_addr(y)) + return -1; + return 0; +} + void sort_extable(struct exception_table_entry *start, struct exception_table_entry *finish) { + sort(start, finish - start, sizeof(struct exception_table_entry), + cmp_ex, swap_ex); } const struct exception_table_entry * @@ -20,7 +58,7 @@ search_extable(const struct exception_ta unsigned long mid_value; mid = (last - first) / 2 + first; - mid_value = (unsigned long)&mid->insn + mid->insn; + mid_value = ex_to_addr(mid); if (mid_value == value) return mid; else if (mid_value < value) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/configs/davinci_all_defconfig linux-2.6.30-rc4-git/arch/arm/configs/davinci_all_defconfig --- linux-2.6.30-rc4/arch/arm/configs/davinci_all_defconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/configs/davinci_all_defconfig 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,1784 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 15 08:16:53 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +CONFIG_ARCH_DAVINCI=y +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# TI DaVinci Implementations +# + +# +# DaVinci Core Type +# +CONFIG_ARCH_DAVINCI_DM644x=y + +# +# DaVinci Board Type +# +CONFIG_MACH_DAVINCI_EVM=y +CONFIG_DAVINCI_MUX=y +CONFIG_DAVINCI_MUX_DEBUG=y +CONFIG_DAVINCI_MUX_WARNINGS=y +CONFIG_DAVINCI_RESET_CLOCKS=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_LEDS=y +# CONFIG_LEDS_CPU is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=m +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_DAVINCI=m +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=m + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_TIMINGS=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=m +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y +CONFIG_BLK_DEV_PALMCHIP_BK3710=m +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_LXT_PHY=y +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +CONFIG_LSI_ET1011C_PHY=y +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_XTKBD=m +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_VT_CONSOLE is not set +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_DAVINCI=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +CONFIG_GPIO_PCF857X=m + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_DAVINCI_WATCHDOG=m + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_RADIO_ADAPTERS is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +CONFIG_SND_SOC=m +# CONFIG_SND_DAVINCI_SOC is not set +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=m +# CONFIG_HID_KYE is not set +CONFIG_HID_GYRATION=m +# CONFIG_HID_KENSINGTON is not set +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=m +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_SOC=y + +# +# DaVinci 35x and 644x USB support +# +# CONFIG_USB_MUSB_HOST is not set +CONFIG_USB_MUSB_PERIPHERAL=y +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_MUSB_PIO_ONLY=y +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/configs/mx21_defconfig linux-2.6.30-rc4-git/arch/arm/configs/mx21_defconfig --- linux-2.6.30-rc4/arch/arm/configs/mx21_defconfig 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/configs/mx21_defconfig 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,1170 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc1 +# Tue Apr 14 16:58:09 2009 +# +CONFIG_ARM=y +CONFIG_HAVE_PWM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Freescale MXC Implementations +# +# CONFIG_ARCH_MX1 is not set +CONFIG_ARCH_MX2=y +# CONFIG_ARCH_MX3 is not set +CONFIG_MACH_MX21=y +# CONFIG_MACH_MX27 is not set + +# +# MX2 platforms: +# +CONFIG_MACH_MX21ADS=y +# CONFIG_MXC_IRQ_PRIOR is not set +CONFIG_MXC_PWM=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=3 +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_MXC=y +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_CS89x0=y +CONFIG_CS89x0_NONISA_IRQ=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +# CONFIG_CONSOLE_TRANSLATIONS is not set +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_IMX=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +# CONFIG_VFAT_FS is not set +CONFIG_FAT_DEFAULT_CODEPAGE=437 +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/configs/mx31moboard_defconfig linux-2.6.30-rc4-git/arch/arm/configs/mx31moboard_defconfig --- linux-2.6.30-rc4/arch/arm/configs/mx31moboard_defconfig 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/configs/mx31moboard_defconfig 1970-01-01 01:00:00.000000000 +0100 @@ -1,790 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc5 -# Fri Oct 24 11:41:22 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_LOKI is not set -# CONFIG_ARCH_MV78XX0 is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -# CONFIG_ARCH_MX2 is not set -CONFIG_ARCH_MX3=y - -# -# MX3 Options -# -# CONFIG_MACH_MX31ADS is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_MX31LITE is not set -CONFIG_MACH_MX31MOBOARD=y -# CONFIG_MXC_IRQ_PRIOR is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -# CONFIG_GPIO_SYSFS is not set - -# -# I2C GPIO expanders: -# - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set - -# -# Voltage and Current regulators -# -# CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -CONFIG_FRAME_POINTER=y -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/configs/mx3_defconfig linux-2.6.30-rc4-git/arch/arm/configs/mx3_defconfig --- linux-2.6.30-rc4/arch/arm/configs/mx3_defconfig 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/configs/mx3_defconfig 2009-05-13 09:46:19.000000000 +0200 @@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y # CONFIG_CPU_32=y CONFIG_CPU_V6=y -CONFIG_CPU_32v6K=y +# CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y CONFIG_CPU_PABRT_NOIFAR=y diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/configs/viper_defconfig linux-2.6.30-rc4-git/arch/arm/configs/viper_defconfig --- linux-2.6.30-rc4/arch/arm/configs/viper_defconfig 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/configs/viper_defconfig 2009-05-13 09:46:19.000000000 +0200 @@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_PXA=y # # Floating point emulation diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/Kconfig linux-2.6.30-rc4-git/arch/arm/Kconfig --- linux-2.6.30-rc4/arch/arm/Kconfig 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/Kconfig 2009-05-13 09:46:19.000000000 +0200 @@ -308,15 +308,6 @@ config ARCH_H720X help This enables support for systems based on the Hynix HMS720x -config ARCH_IMX - bool "IMX" - select CPU_ARM920T - select GENERIC_GPIO - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - help - Support for Motorola's i.MX family of processors (MX1, MXL). - config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU @@ -454,6 +445,7 @@ config ARCH_MXC select ARCH_MTD_XIP select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK help Support for Freescale MXC/iMX-based family of processors @@ -486,8 +478,6 @@ config ARCH_PXA select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT @@ -585,6 +575,8 @@ config ARCH_DAVINCI select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select ZONE_DMA + select HAVE_IDE + select COMMON_CLKDEV help Support for TI's DaVinci platform. @@ -681,8 +673,6 @@ endif source "arch/arm/mach-lh7a40x/Kconfig" -source "arch/arm/mach-imx/Kconfig" - source "arch/arm/mach-h720x/Kconfig" source "arch/arm/mach-versatile/Kconfig" @@ -740,6 +730,56 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config ARM_ERRATA_411920 + bool "ARM errata: Invalidation of the Instruction Cache operation can fail" + depends on CPU_V6 && !SMP + help + Invalidation of the Instruction Cache operation can + fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. + It does not affect the MPCore. This option enables the ARM Ltd. + recommended workaround. + +config ARM_ERRATA_430973 + bool "ARM errata: Stale prediction on replaced interworking branch" + depends on CPU_V7 + help + This option enables the workaround for the 430973 Cortex-A8 + (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb + interworking branch is replaced with another code sequence at the + same virtual address, whether due to self-modifying code or virtual + to physical address re-mapping, Cortex-A8 does not recover from the + stale interworking branch prediction. This results in Cortex-A8 + executing the new code sequence in the incorrect ARM or Thumb state. + The workaround enables the BTB/BTAC operations by setting ACTLR.IBE + and also flushes the branch target cache at every context switch. + Note that setting specific bits in the ACTLR register may not be + available in non-secure mode. + +config ARM_ERRATA_458693 + bool "ARM errata: Processor deadlock when a false hazard is created" + depends on CPU_V7 + help + This option enables the workaround for the 458693 Cortex-A8 (r2p0) + erratum. For very specific sequences of memory operations, it is + possible for a hazard condition intended for a cache line to instead + be incorrectly associated with a different cache line. This false + hazard might then cause a processor deadlock. The workaround enables + the L1 caching of the NEON accesses and disables the PLD instruction + in the ACTLR register. Note that setting specific bits in the ACTLR + register may not be available in non-secure mode. + +config ARM_ERRATA_460075 + bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" + depends on CPU_V7 + help + This option enables the workaround for the 460075 Cortex-A8 (r2p0) + erratum. Any asynchronous access to the L2 cache may encounter a + situation in which recent store transactions to the L2 cache are lost + and overwritten with stale memory contents from external memory. The + workaround disables the write-allocate mode for the L2 cache via the + ACTLR register. Note that setting specific bits in the ACTLR register + may not be available in non-secure mode. + endmenu source "arch/arm/common/Kconfig" @@ -971,7 +1011,7 @@ source "mm/Kconfig" config LEDS bool "Timer and CPU usage LEDs" depends on ARCH_CDB89712 || ARCH_EBSA110 || \ - ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ + ARCH_EBSA285 || ARCH_INTEGRATOR || \ ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ @@ -1137,7 +1177,7 @@ endmenu menu "CPU Power Management" -if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA) +if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA) source "drivers/cpufreq/Kconfig" @@ -1162,15 +1202,6 @@ config CPU_FREQ_INTEGRATOR If in doubt, say Y. -config CPU_FREQ_IMX - tristate "CPUfreq driver for i.MX CPUs" - depends on ARCH_IMX && CPU_FREQ - default n - help - This enables the CPUfreq driver for i.MX CPUs. - - If in doubt, say N. - config CPU_FREQ_PXA bool depends on CPU_FREQ && ARCH_PXA && PXA25x diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/board-dm644x-evm.c linux-2.6.30-rc4-git/arch/arm/mach-davinci/board-dm644x-evm.c --- linux-2.6.30-rc4/arch/arm/mach-davinci/board-dm644x-evm.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/board-dm644x-evm.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,696 @@ +/* + * TI DaVinci EVM board support + * + * Author: Kevin Hilman, MontaVista Software, Inc. + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define DM644X_EVM_PHY_MASK (0x2) +#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ + +#define DAVINCI_CFC_ATA_BASE 0x01C66000 + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000 + +#define LXT971_PHY_ID (0x001378e2) +#define LXT971_PHY_MASK (0xfffffff0) + +static struct mtd_partition davinci_evm_norflash_partitions[] = { + /* bootloader (UBL, U-Boot, etc) in first 5 sectors */ + { + .name = "bootloader", + .offset = 0, + .size = 5 * SZ_64K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next 1 sectors */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_64K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct physmap_flash_data davinci_evm_norflash_data = { + .width = 2, + .parts = davinci_evm_norflash_partitions, + .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions), +}; + +/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF + * limits addresses to 16M, so using addresses past 16M will wrap */ +static struct resource davinci_evm_norflash_resource = { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device davinci_evm_norflash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &davinci_evm_norflash_data, + }, + .num_resources = 1, + .resource = &davinci_evm_norflash_resource, +}; + +/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks). + * It may used instead of the (default) NOR chip to boot, using TI's + * tools to install the secondary boot loader (UBL) and U-Boot. + */ +struct mtd_partition davinci_evm_nandflash_partition[] = { + /* Bootloader layout depends on whose u-boot is installed, but we + * can hide all the details. + * - block 0 for u-boot environment ... in mainline u-boot + * - block 1 for UBL (plus up to four backup copies in blocks 2..5) + * - blocks 6...? for u-boot + * - blocks 16..23 for u-boot environment ... in TI's u-boot + */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_256K + SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* Kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, + /* File system (older GIT kernels started this on the 5MB mark) */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* A few blocks at end hold a flash BBT ... created by TI's CCS + * using flashwriter_nand.out, but ignored by TI's versions of + * Linux and u-boot. We boot faster by using them. + */ +}; + +static struct davinci_nand_pdata davinci_evm_nandflash_data = { + .parts = davinci_evm_nandflash_partition, + .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), + .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_evm_nandflash_resource[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_evm_nandflash_device = { + .name = "davinci_nand", + .id = 0, + .dev = { + .platform_data = &davinci_evm_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource), + .resource = davinci_evm_nandflash_resource, +}; + +static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device davinci_fb_device = { + .name = "davincifb", + .id = -1, + .dev = { + .dma_mask = &davinci_fb_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = 0, +}; + +static struct platform_device rtc_dev = { + .name = "rtc_davinci_evm", + .id = -1, +}; + +static struct resource ide_resources[] = { + { + .start = DAVINCI_CFC_ATA_BASE, + .end = DAVINCI_CFC_ATA_BASE + 0x7ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_IDE, + .end = IRQ_IDE, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ide_dma_mask = DMA_32BIT_MASK; + +static struct platform_device ide_dev = { + .name = "palm_bk3710", + .id = -1, + .resource = ide_resources, + .num_resources = ARRAY_SIZE(ide_resources), + .dev = { + .dma_mask = &ide_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, +}; + +/*----------------------------------------------------------------------*/ + +/* + * I2C GPIO expanders + */ + +#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8)) + + +/* U2 -- LEDs */ + +static struct gpio_led evm_leds[] = { + { .name = "DS8", .active_low = 1, + .default_trigger = "heartbeat", }, + { .name = "DS7", .active_low = 1, }, + { .name = "DS6", .active_low = 1, }, + { .name = "DS5", .active_low = 1, }, + { .name = "DS4", .active_low = 1, }, + { .name = "DS3", .active_low = 1, }, + { .name = "DS2", .active_low = 1, + .default_trigger = "mmc0", }, + { .name = "DS1", .active_low = 1, + .default_trigger = "ide-disk", }, +}; + +static const struct gpio_led_platform_data evm_led_data = { + .num_leds = ARRAY_SIZE(evm_leds), + .leds = evm_leds, +}; + +static struct platform_device *evm_led_dev; + +static int +evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + struct gpio_led *leds = evm_leds; + int status; + + while (ngpio--) { + leds->gpio = gpio++; + leds++; + } + + /* what an extremely annoying way to be forced to handle + * device unregistration ... + */ + evm_led_dev = platform_device_alloc("leds-gpio", 0); + platform_device_add_data(evm_led_dev, + &evm_led_data, sizeof evm_led_data); + + evm_led_dev->dev.parent = &client->dev; + status = platform_device_add(evm_led_dev); + if (status < 0) { + platform_device_put(evm_led_dev); + evm_led_dev = NULL; + } + return status; +} + +static int +evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + if (evm_led_dev) { + platform_device_unregister(evm_led_dev); + evm_led_dev = NULL; + } + return 0; +} + +static struct pcf857x_platform_data pcf_data_u2 = { + .gpio_base = PCF_Uxx_BASE(0), + .setup = evm_led_setup, + .teardown = evm_led_teardown, +}; + + +/* U18 - A/V clock generator and user switch */ + +static int sw_gpio; + +static ssize_t +sw_show(struct device *d, struct device_attribute *a, char *buf) +{ + char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n"; + + strcpy(buf, s); + return strlen(s); +} + +static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL); + +static int +evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + int status; + + /* export dip switch option */ + sw_gpio = gpio + 7; + status = gpio_request(sw_gpio, "user_sw"); + if (status == 0) + status = gpio_direction_input(sw_gpio); + if (status == 0) + status = device_create_file(&client->dev, &dev_attr_user_sw); + else + gpio_free(sw_gpio); + if (status != 0) + sw_gpio = -EINVAL; + + /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */ + gpio_request(gpio + 3, "pll_fs2"); + gpio_direction_output(gpio + 3, 0); + + gpio_request(gpio + 2, "pll_fs1"); + gpio_direction_output(gpio + 2, 0); + + gpio_request(gpio + 1, "pll_sr"); + gpio_direction_output(gpio + 1, 0); + + return 0; +} + +static int +evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + gpio_free(gpio + 1); + gpio_free(gpio + 2); + gpio_free(gpio + 3); + + if (sw_gpio > 0) { + device_remove_file(&client->dev, &dev_attr_user_sw); + gpio_free(sw_gpio); + } + return 0; +} + +static struct pcf857x_platform_data pcf_data_u18 = { + .gpio_base = PCF_Uxx_BASE(1), + .n_latch = (1 << 3) | (1 << 2) | (1 << 1), + .setup = evm_u18_setup, + .teardown = evm_u18_teardown, +}; + + +/* U35 - various I/O signals used to manage USB, CF, ATA, etc */ + +static int +evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + /* p0 = nDRV_VBUS (initial: don't supply it) */ + gpio_request(gpio + 0, "nDRV_VBUS"); + gpio_direction_output(gpio + 0, 1); + + /* p1 = VDDIMX_EN */ + gpio_request(gpio + 1, "VDDIMX_EN"); + gpio_direction_output(gpio + 1, 1); + + /* p2 = VLYNQ_EN */ + gpio_request(gpio + 2, "VLYNQ_EN"); + gpio_direction_output(gpio + 2, 1); + + /* p3 = n3V3_CF_RESET (initial: stay in reset) */ + gpio_request(gpio + 3, "nCF_RESET"); + gpio_direction_output(gpio + 3, 0); + + /* (p4 unused) */ + + /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */ + gpio_request(gpio + 5, "WLAN_RESET"); + gpio_direction_output(gpio + 5, 1); + + /* p6 = nATA_SEL (initial: select) */ + gpio_request(gpio + 6, "nATA_SEL"); + gpio_direction_output(gpio + 6, 0); + + /* p7 = nCF_SEL (initial: deselect) */ + gpio_request(gpio + 7, "nCF_SEL"); + gpio_direction_output(gpio + 7, 1); + + /* irlml6401 switches over 1A, in under 8 msec; + * now it can be managed by nDRV_VBUS ... + */ + setup_usb(500, 8); + + return 0; +} + +static int +evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + gpio_free(gpio + 7); + gpio_free(gpio + 6); + gpio_free(gpio + 5); + gpio_free(gpio + 3); + gpio_free(gpio + 2); + gpio_free(gpio + 1); + gpio_free(gpio + 0); + return 0; +} + +static struct pcf857x_platform_data pcf_data_u35 = { + .gpio_base = PCF_Uxx_BASE(2), + .setup = evm_u35_setup, + .teardown = evm_u35_teardown, +}; + +/*----------------------------------------------------------------------*/ + +/* Most of this EEPROM is unused, but U-Boot uses some data: + * - 0x7f00, 6 bytes Ethernet Address + * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) + * - ... newer boards may have more + */ +static struct memory_accessor *at24_mem_acc; + +static void at24_setup(struct memory_accessor *mem_acc, void *context) +{ + DECLARE_MAC_BUF(mac_str); + char mac_addr[6]; + + at24_mem_acc = mem_acc; + + /* Read MAC addr from EEPROM */ + if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) { + printk(KERN_INFO "Read MAC addr from EEPROM: %s\n", + print_mac(mac_str, mac_addr)); + } +} + +static struct at24_platform_data eeprom_info = { + .byte_len = (256*1024) / 8, + .page_size = 64, + .flags = AT24_FLAG_ADDR16, + .setup = at24_setup, +}; + +int dm6446evm_eeprom_read(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->read(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm6446evm_eeprom_read); + +int dm6446evm_eeprom_write(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->write(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm6446evm_eeprom_write); + +/* + * MSP430 supports RTC, card detection, input from IR remote, and + * a bit more. It triggers interrupts on GPIO(7) from pressing + * buttons on the IR remote, and for card detect switches. + */ +static struct i2c_client *dm6446evm_msp; + +static int dm6446evm_msp_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + dm6446evm_msp = client; + return 0; +} + +static int dm6446evm_msp_remove(struct i2c_client *client) +{ + dm6446evm_msp = NULL; + return 0; +} + +static const struct i2c_device_id dm6446evm_msp_ids[] = { + { "dm6446evm_msp", 0, }, + { /* end of list */ }, +}; + +static struct i2c_driver dm6446evm_msp_driver = { + .driver.name = "dm6446evm_msp", + .id_table = dm6446evm_msp_ids, + .probe = dm6446evm_msp_probe, + .remove = dm6446evm_msp_remove, +}; + +static int dm6444evm_msp430_get_pins(void) +{ + static const char txbuf[2] = { 2, 4, }; + char buf[4]; + struct i2c_msg msg[2] = { + { + .addr = dm6446evm_msp->addr, + .flags = 0, + .len = 2, + .buf = (void __force *)txbuf, + }, + { + .addr = dm6446evm_msp->addr, + .flags = I2C_M_RD, + .len = 4, + .buf = buf, + }, + }; + int status; + + if (!dm6446evm_msp) + return -ENXIO; + + /* Command 4 == get input state, returns port 2 and port3 data + * S Addr W [A] len=2 [A] cmd=4 [A] + * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P + */ + status = i2c_transfer(dm6446evm_msp->adapter, msg, 2); + if (status < 0) + return status; + + dev_dbg(&dm6446evm_msp->dev, + "PINS: %02x %02x %02x %02x\n", + buf[0], buf[1], buf[2], buf[3]); + + return (buf[3] << 8) | buf[2]; +} + +static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("dm6446evm_msp", 0x23), + }, + { + I2C_BOARD_INFO("pcf8574", 0x38), + .platform_data = &pcf_data_u2, + }, + { + I2C_BOARD_INFO("pcf8574", 0x39), + .platform_data = &pcf_data_u18, + }, + { + I2C_BOARD_INFO("pcf8574", 0x3a), + .platform_data = &pcf_data_u35, + }, + { + I2C_BOARD_INFO("24c256", 0x50), + .platform_data = &eeprom_info, + }, + /* ALSO: + * - tvl320aic33 audio codec (0x1b) + * - tvp5146 video decoder (0x5d) + */ +}; + +/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz), + * which requires 100 usec of idle bus after i2c writes sent to it. + */ +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 20 /* kHz */, + .bus_delay = 100 /* usec */, +}; + +static void __init evm_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + i2c_add_driver(&dm6446evm_msp_driver); + i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); +} + +static struct platform_device *davinci_evm_devices[] __initdata = { + &davinci_fb_device, + &rtc_dev, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init +davinci_evm_map_io(void) +{ + davinci_map_common_io(); + dm644x_init(); +} + +static int davinci_phy_fixup(struct phy_device *phydev) +{ + unsigned int control; + /* CRITICAL: Fix for increasing PHY signal drive strength for + * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY + * signal strength was low causing TX to fail randomly. The + * fix is to Set bit 11 (Increased MII drive strength) of PHY + * register 26 (Digital Config register) on this phy. */ + control = phy_read(phydev, 26); + phy_write(phydev, 26, (control | 0x800)); + return 0; +} + +#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ + defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#define HAS_ATA 1 +#else +#define HAS_ATA 0 +#endif + +#if defined(CONFIG_MTD_PHYSMAP) || \ + defined(CONFIG_MTD_PHYSMAP_MODULE) +#define HAS_NOR 1 +#else +#define HAS_NOR 0 +#endif + +#if defined(CONFIG_MTD_NAND_DAVINCI) || \ + defined(CONFIG_MTD_NAND_DAVINCI_MODULE) +#define HAS_NAND 1 +#else +#define HAS_NAND 0 +#endif + +static __init void davinci_evm_init(void) +{ + struct clk *aemif_clk; + + aemif_clk = clk_get(NULL, "aemif"); + clk_enable(aemif_clk); + + if (HAS_ATA) { + if (HAS_NAND || HAS_NOR) + pr_warning("WARNING: both IDE and Flash are " + "enabled, but they share AEMIF pins.\n" + "\tDisable IDE for NAND/NOR support.\n"); + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN); + davinci_cfg_reg(DM644X_HDIREN); + platform_device_register(&ide_dev); + } else if (HAS_NAND || HAS_NOR) { + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN_DISABLE); + + /* only one device will be jumpered and detected */ + if (HAS_NAND) { + platform_device_register(&davinci_evm_nandflash_device); + evm_leds[7].default_trigger = "nand-disk"; + if (HAS_NOR) + pr_warning("WARNING: both NAND and NOR flash " + "are enabled; disable one of them.\n"); + } else if (HAS_NOR) + platform_device_register(&davinci_evm_norflash_device); + } + + platform_add_devices(davinci_evm_devices, + ARRAY_SIZE(davinci_evm_devices)); + evm_init_i2c(); + + davinci_serial_init(&uart_config); + + /* Register the fixup for PHY on DaVinci */ + phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, + davinci_phy_fixup); + +} + +static __init void davinci_evm_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") + /* Maintainer: MontaVista Software */ + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (DAVINCI_DDR_BASE + 0x100), + .map_io = davinci_evm_map_io, + .init_irq = davinci_evm_irq_init, + .timer = &davinci_timer, + .init_machine = davinci_evm_init, +MACHINE_END diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/board-evm.c linux-2.6.30-rc4-git/arch/arm/mach-davinci/board-evm.c --- linux-2.6.30-rc4/arch/arm/mach-davinci/board-evm.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/board-evm.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,440 +0,0 @@ -/* - * TI DaVinci EVM board support - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include -#include -#include - -/* other misc. init functions */ -void __init davinci_psc_init(void); -void __init davinci_irq_init(void); -void __init davinci_map_common_io(void); -void __init davinci_init_common_hw(void); - -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - -static struct mtd_partition davinci_evm_norflash_partitions[] = { - /* bootloader (U-Boot, etc) in first 4 sectors */ - { - .name = "bootloader", - .offset = 0, - .size = 4 * SZ_64K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next 1 sectors */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_64K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data davinci_evm_norflash_data = { - .width = 2, - .parts = davinci_evm_norflash_partitions, - .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions), -}; - -/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF - * limits addresses to 16M, so using addresses past 16M will wrap */ -static struct resource davinci_evm_norflash_resource = { - .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, - .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device davinci_evm_norflash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &davinci_evm_norflash_data, - }, - .num_resources = 1, - .resource = &davinci_evm_norflash_resource, -}; - -#endif - -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) - -static struct resource ide_resources[] = { - { - .start = DAVINCI_CFC_ATA_BASE, - .end = DAVINCI_CFC_ATA_BASE + 0x7ff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_IDE, - .end = IRQ_IDE, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ide_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ide_dev = { - .name = "palm_bk3710", - .id = -1, - .resource = ide_resources, - .num_resources = ARRAY_SIZE(ide_resources), - .dev = { - .dma_mask = &ide_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -#endif - -/*----------------------------------------------------------------------*/ - -/* - * I2C GPIO expanders - */ - -#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8)) - - -/* U2 -- LEDs */ - -static struct gpio_led evm_leds[] = { - { .name = "DS8", .active_low = 1, - .default_trigger = "heartbeat", }, - { .name = "DS7", .active_low = 1, }, - { .name = "DS6", .active_low = 1, }, - { .name = "DS5", .active_low = 1, }, - { .name = "DS4", .active_low = 1, }, - { .name = "DS3", .active_low = 1, }, - { .name = "DS2", .active_low = 1, - .default_trigger = "mmc0", }, - { .name = "DS1", .active_low = 1, - .default_trigger = "ide-disk", }, -}; - -static const struct gpio_led_platform_data evm_led_data = { - .num_leds = ARRAY_SIZE(evm_leds), - .leds = evm_leds, -}; - -static struct platform_device *evm_led_dev; - -static int -evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - struct gpio_led *leds = evm_leds; - int status; - - while (ngpio--) { - leds->gpio = gpio++; - leds++; - } - - /* what an extremely annoying way to be forced to handle - * device unregistration ... - */ - evm_led_dev = platform_device_alloc("leds-gpio", 0); - platform_device_add_data(evm_led_dev, - &evm_led_data, sizeof evm_led_data); - - evm_led_dev->dev.parent = &client->dev; - status = platform_device_add(evm_led_dev); - if (status < 0) { - platform_device_put(evm_led_dev); - evm_led_dev = NULL; - } - return status; -} - -static int -evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - if (evm_led_dev) { - platform_device_unregister(evm_led_dev); - evm_led_dev = NULL; - } - return 0; -} - -static struct pcf857x_platform_data pcf_data_u2 = { - .gpio_base = PCF_Uxx_BASE(0), - .setup = evm_led_setup, - .teardown = evm_led_teardown, -}; - - -/* U18 - A/V clock generator and user switch */ - -static int sw_gpio; - -static ssize_t -sw_show(struct device *d, struct device_attribute *a, char *buf) -{ - char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n"; - - strcpy(buf, s); - return strlen(s); -} - -static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL); - -static int -evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - int status; - - /* export dip switch option */ - sw_gpio = gpio + 7; - status = gpio_request(sw_gpio, "user_sw"); - if (status == 0) - status = gpio_direction_input(sw_gpio); - if (status == 0) - status = device_create_file(&client->dev, &dev_attr_user_sw); - else - gpio_free(sw_gpio); - if (status != 0) - sw_gpio = -EINVAL; - - /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */ - gpio_request(gpio + 3, "pll_fs2"); - gpio_direction_output(gpio + 3, 0); - - gpio_request(gpio + 2, "pll_fs1"); - gpio_direction_output(gpio + 2, 0); - - gpio_request(gpio + 1, "pll_sr"); - gpio_direction_output(gpio + 1, 0); - - return 0; -} - -static int -evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - gpio_free(gpio + 1); - gpio_free(gpio + 2); - gpio_free(gpio + 3); - - if (sw_gpio > 0) { - device_remove_file(&client->dev, &dev_attr_user_sw); - gpio_free(sw_gpio); - } - return 0; -} - -static struct pcf857x_platform_data pcf_data_u18 = { - .gpio_base = PCF_Uxx_BASE(1), - .n_latch = (1 << 3) | (1 << 2) | (1 << 1), - .setup = evm_u18_setup, - .teardown = evm_u18_teardown, -}; - - -/* U35 - various I/O signals used to manage USB, CF, ATA, etc */ - -static int -evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - /* p0 = nDRV_VBUS (initial: don't supply it) */ - gpio_request(gpio + 0, "nDRV_VBUS"); - gpio_direction_output(gpio + 0, 1); - - /* p1 = VDDIMX_EN */ - gpio_request(gpio + 1, "VDDIMX_EN"); - gpio_direction_output(gpio + 1, 1); - - /* p2 = VLYNQ_EN */ - gpio_request(gpio + 2, "VLYNQ_EN"); - gpio_direction_output(gpio + 2, 1); - - /* p3 = n3V3_CF_RESET (initial: stay in reset) */ - gpio_request(gpio + 3, "nCF_RESET"); - gpio_direction_output(gpio + 3, 0); - - /* (p4 unused) */ - - /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */ - gpio_request(gpio + 5, "WLAN_RESET"); - gpio_direction_output(gpio + 5, 1); - - /* p6 = nATA_SEL (initial: select) */ - gpio_request(gpio + 6, "nATA_SEL"); - gpio_direction_output(gpio + 6, 0); - - /* p7 = nCF_SEL (initial: deselect) */ - gpio_request(gpio + 7, "nCF_SEL"); - gpio_direction_output(gpio + 7, 1); - - /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ - setup_usb(500, 8); - - return 0; -} - -static int -evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - gpio_free(gpio + 7); - gpio_free(gpio + 6); - gpio_free(gpio + 5); - gpio_free(gpio + 3); - gpio_free(gpio + 2); - gpio_free(gpio + 1); - gpio_free(gpio + 0); - return 0; -} - -static struct pcf857x_platform_data pcf_data_u35 = { - .gpio_base = PCF_Uxx_BASE(2), - .setup = evm_u35_setup, - .teardown = evm_u35_teardown, -}; - -/*----------------------------------------------------------------------*/ - -/* Most of this EEPROM is unused, but U-Boot uses some data: - * - 0x7f00, 6 bytes Ethernet Address - * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) - * - ... newer boards may have more - */ -static struct at24_platform_data eeprom_info = { - .byte_len = (256*1024) / 8, - .page_size = 64, - .flags = AT24_FLAG_ADDR16, -}; - -static struct i2c_board_info __initdata i2c_info[] = { - { - I2C_BOARD_INFO("pcf8574", 0x38), - .platform_data = &pcf_data_u2, - }, - { - I2C_BOARD_INFO("pcf8574", 0x39), - .platform_data = &pcf_data_u18, - }, - { - I2C_BOARD_INFO("pcf8574", 0x3a), - .platform_data = &pcf_data_u35, - }, - { - I2C_BOARD_INFO("24c256", 0x50), - .platform_data = &eeprom_info, - }, - /* ALSO: - * - tvl320aic33 audio codec (0x1b) - * - msp430 microcontroller (0x23) - * - tvp5146 video decoder (0x5d) - */ -}; - -/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz), - * which requires 100 usec of idle bus after i2c writes sent to it. - */ -static struct davinci_i2c_platform_data i2c_pdata = { - .bus_freq = 20 /* kHz */, - .bus_delay = 100 /* usec */, -}; - -static void __init evm_init_i2c(void) -{ - davinci_init_i2c(&i2c_pdata); - i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); -} - -static struct platform_device *davinci_evm_devices[] __initdata = { -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - &davinci_evm_norflash_device, -#endif -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) - &ide_dev, -#endif -}; - -static void __init -davinci_evm_map_io(void) -{ - davinci_map_common_io(); -} - -static __init void davinci_evm_init(void) -{ - davinci_psc_init(); - -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, " - "but share pins.\n\t Disable IDE for NOR support.\n"); -#endif -#endif - - platform_add_devices(davinci_evm_devices, - ARRAY_SIZE(davinci_evm_devices)); - evm_init_i2c(); -} - -static __init void davinci_evm_irq_init(void) -{ - davinci_init_common_hw(); - davinci_irq_init(); -} - -MACHINE_START(DAVINCI_EVM, "DaVinci EVM") - /* Maintainer: MontaVista Software */ - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, - .boot_params = (DAVINCI_DDR_BASE + 0x100), - .map_io = davinci_evm_map_io, - .init_irq = davinci_evm_irq_init, - .timer = &davinci_timer, - .init_machine = davinci_evm_init, -MACHINE_END diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/clock.c linux-2.6.30-rc4-git/arch/arm/mach-davinci/clock.c --- linux-2.6.30-rc4/arch/arm/mach-davinci/clock.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/clock.c 2009-05-13 09:46:19.000000000 +0200 @@ -1,7 +1,8 @@ /* - * TI DaVinci clock config file + * Clock and PLL control for DaVinci devices * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -21,98 +23,50 @@ #include #include +#include #include "clock.h" -/* PLL/Reset register offsets */ -#define PLLM 0x110 - static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clockfw_lock); -static unsigned int commonrate; -static unsigned int armrate; -static unsigned int fixedrate = 27000000; /* 27 MHZ */ - -extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable); - -/* - * Returns a clock. Note that we first try to use device id on the bus - * and clock name. If this fails, we try to use clock name only. - */ -struct clk *clk_get(struct device *dev, const char *id) +static unsigned psc_domain(struct clk *clk) { - struct clk *p, *clk = ERR_PTR(-ENOENT); - int idno; - - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; - else - idno = to_platform_device(dev)->id; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(p, &clocks, node) { - if (p->id == idno && - strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - goto found; - } - } - - list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - break; - } - } - -found: - mutex_unlock(&clocks_mutex); - - return clk; + return (clk->flags & PSC_DSP) + ? DAVINCI_GPSC_DSPDOMAIN + : DAVINCI_GPSC_ARMDOMAIN; } -EXPORT_SYMBOL(clk_get); -void clk_put(struct clk *clk) +static void __clk_enable(struct clk *clk) { - if (clk && !IS_ERR(clk)) - module_put(clk->owner); -} -EXPORT_SYMBOL(clk_put); - -static int __clk_enable(struct clk *clk) -{ - if (clk->flags & ALWAYS_ENABLED) - return 0; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1); - return 0; + if (clk->parent) + __clk_enable(clk->parent); + if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) + davinci_psc_config(psc_domain(clk), clk->lpsc, 1); } static void __clk_disable(struct clk *clk) { - if (clk->usecount) + if (WARN_ON(clk->usecount == 0)) return; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0); + if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) + davinci_psc_config(psc_domain(clk), clk->lpsc, 0); + if (clk->parent) + __clk_disable(clk->parent); } int clk_enable(struct clk *clk) { unsigned long flags; - int ret = 0; if (clk == NULL || IS_ERR(clk)) return -EINVAL; - if (clk->usecount++ == 0) { - spin_lock_irqsave(&clockfw_lock, flags); - ret = __clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); - return ret; + return 0; } EXPORT_SYMBOL(clk_enable); @@ -123,11 +77,9 @@ void clk_disable(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return; - if (clk->usecount > 0 && !(--clk->usecount)) { - spin_lock_irqsave(&clockfw_lock, flags); - __clk_disable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_disable); @@ -136,7 +88,7 @@ unsigned long clk_get_rate(struct clk *c if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_get_rate); @@ -145,7 +97,7 @@ long clk_round_rate(struct clk *clk, uns if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_round_rate); @@ -164,10 +116,23 @@ int clk_register(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; + if (WARN(clk->parent && !clk->parent->rate, + "CLK: %s parent %s has no rate!\n", + clk->name, clk->parent->name)) + return -EINVAL; + mutex_lock(&clocks_mutex); - list_add(&clk->node, &clocks); + list_add_tail(&clk->node, &clocks); mutex_unlock(&clocks_mutex); + /* If rate is already set, use it */ + if (clk->rate) + return 0; + + /* Otherwise, default to parent rate */ + if (clk->parent) + clk->rate = clk->parent->rate; + return 0; } EXPORT_SYMBOL(clk_register); @@ -183,84 +148,150 @@ void clk_unregister(struct clk *clk) } EXPORT_SYMBOL(clk_unregister); -static struct clk davinci_clks[] = { - { - .name = "ARMCLK", - .rate = &armrate, - .lpsc = -1, - .flags = ALWAYS_ENABLED, - }, - { - .name = "UART", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_UART0, - }, - { - .name = "EMACCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, - }, - { - .name = "I2CCLK", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_I2C, - }, - { - .name = "IDECLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_ATA, - }, - { - .name = "McBSPCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_McBSP, - }, - { - .name = "MMCSDCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_MMC_SD, - }, - { - .name = "SPICLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_SPI, - }, - { - .name = "gpio", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_GPIO, - }, - { - .name = "usb", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_USB, - }, - { - .name = "AEMIFCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_AEMIF, - .usecount = 1, +#ifdef CONFIG_DAVINCI_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + + spin_lock_irq(&clockfw_lock); + list_for_each_entry(ck, &clocks, node) { + if (ck->usecount > 0) + continue; + if (!(ck->flags & CLK_PSC)) + continue; + + /* ignore if in Disabled or SwRstDisable states */ + if (!davinci_psc_is_clk_active(ck->lpsc)) + continue; + + pr_info("Clocks: disable unused %s\n", ck->name); + davinci_psc_config(psc_domain(ck), ck->lpsc, 0); } -}; + spin_unlock_irq(&clockfw_lock); + + return 0; +} +late_initcall(clk_disable_unused); +#endif -int __init davinci_clk_init(void) +static void clk_sysclk_recalc(struct clk *clk) { - struct clk *clkp; - int count = 0; - u32 pll_mult; - - pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM); - commonrate = ((pll_mult + 1) * 27000000) / 6; - armrate = ((pll_mult + 1) * 27000000) / 2; - - for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks); - count++, clkp++) { - clk_register(clkp); - - /* Turn on clocks that have been enabled in the - * table above */ - if (clkp->usecount) - clk_enable(clkp); + u32 v, plldiv; + struct pll_data *pll; + + /* If this is the PLL base clock, no more calculations needed */ + if (clk->pll_data) + return; + + if (WARN_ON(!clk->parent)) + return; + + clk->rate = clk->parent->rate; + + /* Otherwise, the parent must be a PLL */ + if (WARN_ON(!clk->parent->pll_data)) + return; + + pll = clk->parent->pll_data; + + /* If pre-PLL, source clock is before the multiplier and divider(s) */ + if (clk->flags & PRE_PLL) + clk->rate = pll->input_rate; + + if (!clk->div_reg) + return; + + v = __raw_readl(pll->base + clk->div_reg); + if (v & PLLDIV_EN) { + plldiv = (v & PLLDIV_RATIO_MASK) + 1; + if (plldiv) + clk->rate /= plldiv; + } +} + +static void __init clk_pll_init(struct clk *clk) +{ + u32 ctrl, mult = 1, prediv = 1, postdiv = 1; + u8 bypass; + struct pll_data *pll = clk->pll_data; + + pll->base = IO_ADDRESS(pll->phys_base); + ctrl = __raw_readl(pll->base + PLLCTL); + clk->rate = pll->input_rate = clk->parent->rate; + + if (ctrl & PLLCTL_PLLEN) { + bypass = 0; + mult = __raw_readl(pll->base + PLLM); + mult = (mult & PLLM_PLLM_MASK) + 1; + } else + bypass = 1; + + if (pll->flags & PLL_HAS_PREDIV) { + prediv = __raw_readl(pll->base + PREDIV); + if (prediv & PLLDIV_EN) + prediv = (prediv & PLLDIV_RATIO_MASK) + 1; + else + prediv = 1; + } + + /* pre-divider is fixed, but (some?) chips won't report that */ + if (cpu_is_davinci_dm355() && pll->num == 1) + prediv = 8; + + if (pll->flags & PLL_HAS_POSTDIV) { + postdiv = __raw_readl(pll->base + POSTDIV); + if (postdiv & PLLDIV_EN) + postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1; + else + postdiv = 1; + } + + if (!bypass) { + clk->rate /= prediv; + clk->rate *= mult; + clk->rate /= postdiv; + } + + pr_debug("PLL%d: input = %lu MHz [ ", + pll->num, clk->parent->rate / 1000000); + if (bypass) + pr_debug("bypass "); + if (prediv > 1) + pr_debug("/ %d ", prediv); + if (mult > 1) + pr_debug("* %d ", mult); + if (postdiv > 1) + pr_debug("/ %d ", postdiv); + pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000); +} + +int __init davinci_clk_init(struct davinci_clk *clocks) + { + struct davinci_clk *c; + struct clk *clk; + + for (c = clocks; c->lk.clk; c++) { + clk = c->lk.clk; + + if (clk->pll_data) + clk_pll_init(clk); + + /* Calculate rates for PLL-derived clocks */ + else if (clk->flags & CLK_PLL) + clk_sysclk_recalc(clk); + + if (clk->lpsc) + clk->flags |= CLK_PSC; + + clkdev_add(&c->lk); + clk_register(clk); + + /* Turn on clocks that Linux doesn't otherwise manage */ + if (clk->flags & ALWAYS_ENABLED) + clk_enable(clk); } return 0; @@ -285,12 +316,52 @@ static void davinci_ck_stop(struct seq_f { } +#define CLKNAME_MAX 10 /* longest clock name */ +#define NEST_DELTA 2 +#define NEST_MAX 4 + +static void +dump_clock(struct seq_file *s, unsigned nest, struct clk *parent) +{ + char *state; + char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX]; + struct clk *clk; + unsigned i; + + if (parent->flags & CLK_PLL) + state = "pll"; + else if (parent->flags & CLK_PSC) + state = "psc"; + else + state = ""; + + /* name */ + memset(buf, ' ', sizeof(buf) - 1); + buf[sizeof(buf) - 1] = 0; + i = strlen(parent->name); + memcpy(buf + nest, parent->name, + min(i, (unsigned)(sizeof(buf) - 1 - nest))); + + seq_printf(s, "%s users=%2d %-3s %9ld Hz\n", + buf, parent->usecount, state, clk_get_rate(parent)); + /* REVISIT show device associations too */ + + /* cost is now small, but not linear... */ + list_for_each_entry(clk, &clocks, node) { + if (clk->parent == parent) + dump_clock(s, nest + NEST_DELTA, clk); + } +} + static int davinci_ck_show(struct seq_file *m, void *v) { - struct clk *cp; - - list_for_each_entry(cp, &clocks, node) - seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount); + /* Show clock tree; we know the main oscillator is first. + * We trust nonzero usecounts equate to PSC enables... + */ + mutex_lock(&clocks_mutex); + if (!list_empty(&clocks)) + dump_clock(m, 0, list_first_entry(&clocks, struct clk, node)); + mutex_unlock(&clocks_mutex); return 0; } @@ -321,4 +392,4 @@ static int __init davinci_ck_proc_init(v } __initcall(davinci_ck_proc_init); -#endif /* CONFIG_DEBUG_PROC_FS */ +#endif /* CONFIG_DEBUG_PROC_FS */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/clock.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/clock.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/clock.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/clock.h 2009-05-13 09:46:19.000000000 +0200 @@ -1,7 +1,8 @@ /* * TI DaVinci clock definitions * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,23 +12,85 @@ #ifndef __ARCH_ARM_DAVINCI_CLOCK_H #define __ARCH_ARM_DAVINCI_CLOCK_H +#include +#include + +#define DAVINCI_PLL1_BASE 0x01c40800 +#define DAVINCI_PLL2_BASE 0x01c40c00 +#define MAX_PLL 2 + +/* PLL/Reset register offsets */ +#define PLLCTL 0x100 +#define PLLCTL_PLLEN BIT(0) +#define PLLCTL_CLKMODE BIT(8) + +#define PLLM 0x110 +#define PLLM_PLLM_MASK 0xff + +#define PREDIV 0x114 +#define PLLDIV1 0x118 +#define PLLDIV2 0x11c +#define PLLDIV3 0x120 +#define POSTDIV 0x128 +#define BPDIV 0x12c +#define PLLCMD 0x138 +#define PLLSTAT 0x13c +#define PLLALNCTL 0x140 +#define PLLDCHANGE 0x144 +#define PLLCKEN 0x148 +#define PLLCKSTAT 0x14c +#define PLLSYSTAT 0x150 +#define PLLDIV4 0x160 +#define PLLDIV5 0x164 +#define PLLDIV6 0x168 +#define PLLDIV7 0x16c +#define PLLDIV8 0x170 +#define PLLDIV9 0x174 +#define PLLDIV_EN BIT(15) +#define PLLDIV_RATIO_MASK 0x1f + +struct pll_data { + u32 phys_base; + void __iomem *base; + u32 num; + u32 flags; + u32 input_rate; +}; +#define PLL_HAS_PREDIV 0x01 +#define PLL_HAS_POSTDIV 0x02 + struct clk { struct list_head node; struct module *owner; const char *name; - unsigned int *rate; - int id; - __s8 usecount; - __u8 flags; - __u8 lpsc; + unsigned long rate; + u8 usecount; + u8 flags; + u8 lpsc; + struct clk *parent; + struct pll_data *pll_data; + u32 div_reg; }; /* Clock flags */ -#define RATE_CKCTL 1 -#define RATE_FIXED 2 -#define RATE_PROPAGATES 4 -#define VIRTUAL_CLOCK 8 -#define ALWAYS_ENABLED 16 -#define ENABLE_REG_32BIT 32 +#define ALWAYS_ENABLED BIT(1) +#define CLK_PSC BIT(2) +#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */ +#define CLK_PLL BIT(4) /* PLL-derived clock */ +#define PRE_PLL BIT(5) /* source is before PLL mult/div */ + +struct davinci_clk { + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck) \ + { \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } +int davinci_clk_init(struct davinci_clk *clocks); #endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/devices.c linux-2.6.30-rc4-git/arch/arm/mach-davinci/devices.c --- linux-2.6.30-rc4/arch/arm/mach-davinci/devices.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/devices.c 2009-05-13 09:46:19.000000000 +0200 @@ -21,6 +21,10 @@ #include #include #include +#include +#include + +#define DAVINCI_I2C_BASE 0x01C21000 static struct resource i2c_resources[] = { { @@ -43,6 +47,9 @@ static struct platform_device davinci_i2 void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata) { + if (cpu_is_davinci_dm644x()) + davinci_cfg_reg(DM644X_I2C); + davinci_i2c_device.dev.platform_data = pdata; (void) platform_device_register(&davinci_i2c_device); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/dm644x.c linux-2.6.30-rc4-git/arch/arm/mach-davinci/dm644x.c --- linux-2.6.30-rc4/arch/arm/mach-davinci/dm644x.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/dm644x.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,461 @@ +/* + * TI DaVinci DM644x chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "clock.h" +#include "mux.h" + +/* + * Device specific clocks + */ +#define DM644X_REF_FREQ 27000000 + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + .rate = DM644X_REF_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .pll_data = &pll1_data, + .flags = CLK_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk5 = { + .name = "pll1_sysclk5", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk pll2_clk = { + .name = "pll2", + .parent = &ref_clk, + .pll_data = &pll2_data, + .flags = CLK_PLL, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll2_sysclk2 = { + .name = "pll2_sysclk2", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll2_sysclkbp = { + .name = "pll2_sysclkbp", + .parent = &pll2_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk dsp_clk = { + .name = "dsp", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_GEM, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk arm_clk = { + .name = "arm", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk vicp_clk = { + .name = "vicp", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_IMCOP, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk vpss_master_clk = { + .name = "vpss_master", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSMSTR, + .flags = CLK_PSC, +}; + +static struct clk vpss_slave_clk = { + .name = "vpss_slave", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSSLV, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART2, +}; + +static struct clk emac_clk = { + .name = "emac", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, +}; + +static struct clk i2c_clk = { + .name = "i2c", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_I2C, +}; + +static struct clk ide_clk = { + .name = "ide", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_ATA, +}; + +static struct clk asp_clk = { + .name = "asp0", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_McBSP, +}; + +static struct clk mmcsd_clk = { + .name = "mmcsd", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_MMC_SD, +}; + +static struct clk spi_clk = { + .name = "spi", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_SPI, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_GPIO, +}; + +static struct clk usb_clk = { + .name = "usb", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_USB, +}; + +static struct clk vlynq_clk = { + .name = "vlynq", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_VLYNQ, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_AEMIF, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM0, +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM1, +}; + +static struct clk pwm2_clk = { + .name = "pwm2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM2, +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER2, + .usecount = 1, /* REVISIT: why cant' this be disabled? */ +}; + +struct davinci_clk dm644x_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "pll2_sysclk2", &pll2_sysclk2), + CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), + CLK(NULL, "dsp", &dsp_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "vicp", &vicp_clk), + CLK(NULL, "vpss_master", &vpss_master_clk), + CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("davinci_emac.1", NULL, &emac_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK("palm_bk3710", NULL, &ide_clk), + CLK("soc-audio.0", NULL, &asp_clk), + CLK("davinci_mmc.0", NULL, &mmcsd_clk), + CLK(NULL, "spi", &spi_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "usb", &usb_clk), + CLK(NULL, "vlynq", &vlynq_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "pwm2", &pwm2_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, NULL, NULL), +}; + +#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) + +static struct resource dm644x_emac_resources[] = { + { + .start = DM644X_EMAC_BASE, + .end = DM644X_EMAC_BASE + 0x47ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_EMACINT, + .end = IRQ_EMACINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm644x_emac_device = { + .name = "davinci_emac", + .id = 1, + .num_resources = ARRAY_SIZE(dm644x_emac_resources), + .resource = dm644x_emac_resources, +}; + +#endif + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm644x_pins[] = { +MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true) +MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true) +MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true) + +MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true) + +MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true) + +MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false) + +MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false) + +MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false) + +MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true) +MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true) + +MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false) + +MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false) + +MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false) + +MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false) +MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false) +MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false) + +MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true) + +MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true) + +MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true) +MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false) +MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false) +MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true) + +MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true) + +MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true) +MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false) +}; + + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm644x_no_event[] = { + 0, 1, 12, 13, 14, + 15, 25, 30, 31, 45, + 46, 47, 55, 56, 57, + 58, 59, 60, 61, 62, + 63, + -1 +}; + +static struct edma_soc_info dm644x_edma_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .noevent = dma_chan_dm644x_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using TC*_ERR */ +}; + +static struct platform_device dm644x_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm644x_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ +void __init dm644x_init(void) +{ + davinci_clk_init(dm644x_clks); + davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins)); +} + +static int __init dm644x_init_devices(void) +{ + if (!cpu_is_davinci_dm644x()) + return 0; + + platform_device_register(&dm644x_edma_device); + return 0; +} +postcore_initcall(dm644x_init_devices); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/dma.c linux-2.6.30-rc4-git/arch/arm/mach-davinci/dma.c --- linux-2.6.30-rc4/arch/arm/mach-davinci/dma.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/dma.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,1135 @@ +/* + * EDMA3 support for DaVinci + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + + +/* Offsets matching "struct edmacc_param" */ +#define PARM_OPT 0x00 +#define PARM_SRC 0x04 +#define PARM_A_B_CNT 0x08 +#define PARM_DST 0x0c +#define PARM_SRC_DST_BIDX 0x10 +#define PARM_LINK_BCNTRLD 0x14 +#define PARM_SRC_DST_CIDX 0x18 +#define PARM_CCNT 0x1c + +#define PARM_SIZE 0x20 + +/* Offsets for EDMA CC global channel registers and their shadows */ +#define SH_ER 0x00 /* 64 bits */ +#define SH_ECR 0x08 /* 64 bits */ +#define SH_ESR 0x10 /* 64 bits */ +#define SH_CER 0x18 /* 64 bits */ +#define SH_EER 0x20 /* 64 bits */ +#define SH_EECR 0x28 /* 64 bits */ +#define SH_EESR 0x30 /* 64 bits */ +#define SH_SER 0x38 /* 64 bits */ +#define SH_SECR 0x40 /* 64 bits */ +#define SH_IER 0x50 /* 64 bits */ +#define SH_IECR 0x58 /* 64 bits */ +#define SH_IESR 0x60 /* 64 bits */ +#define SH_IPR 0x68 /* 64 bits */ +#define SH_ICR 0x70 /* 64 bits */ +#define SH_IEVAL 0x78 +#define SH_QER 0x80 +#define SH_QEER 0x84 +#define SH_QEECR 0x88 +#define SH_QEESR 0x8c +#define SH_QSER 0x90 +#define SH_QSECR 0x94 +#define SH_SIZE 0x200 + +/* Offsets for EDMA CC global registers */ +#define EDMA_REV 0x0000 +#define EDMA_CCCFG 0x0004 +#define EDMA_QCHMAP 0x0200 /* 8 registers */ +#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */ +#define EDMA_QDMAQNUM 0x0260 +#define EDMA_QUETCMAP 0x0280 +#define EDMA_QUEPRI 0x0284 +#define EDMA_EMR 0x0300 /* 64 bits */ +#define EDMA_EMCR 0x0308 /* 64 bits */ +#define EDMA_QEMR 0x0310 +#define EDMA_QEMCR 0x0314 +#define EDMA_CCERR 0x0318 +#define EDMA_CCERRCLR 0x031c +#define EDMA_EEVAL 0x0320 +#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/ +#define EDMA_QRAE 0x0380 /* 4 registers */ +#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */ +#define EDMA_QSTAT 0x0600 /* 2 registers */ +#define EDMA_QWMTHRA 0x0620 +#define EDMA_QWMTHRB 0x0624 +#define EDMA_CCSTAT 0x0640 + +#define EDMA_M 0x1000 /* global channel registers */ +#define EDMA_ECR 0x1008 +#define EDMA_ECRH 0x100C +#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */ +#define EDMA_PARM 0x4000 /* 128 param entries */ + +#define DAVINCI_DMA_3PCC_BASE 0x01C00000 + +#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5)) + +#define EDMA_MAX_DMACH 64 +#define EDMA_MAX_PARAMENTRY 512 +#define EDMA_MAX_EVQUE 2 /* FIXME too small */ + + +/*****************************************************************************/ + +static void __iomem *edmacc_regs_base; + +static inline unsigned int edma_read(int offset) +{ + return (unsigned int)__raw_readl(edmacc_regs_base + offset); +} + +static inline void edma_write(int offset, int val) +{ + __raw_writel(val, edmacc_regs_base + offset); +} +static inline void edma_modify(int offset, unsigned and, unsigned or) +{ + unsigned val = edma_read(offset); + val &= and; + val |= or; + edma_write(offset, val); +} +static inline void edma_and(int offset, unsigned and) +{ + unsigned val = edma_read(offset); + val &= and; + edma_write(offset, val); +} +static inline void edma_or(int offset, unsigned or) +{ + unsigned val = edma_read(offset); + val |= or; + edma_write(offset, val); +} +static inline unsigned int edma_read_array(int offset, int i) +{ + return edma_read(offset + (i << 2)); +} +static inline void edma_write_array(int offset, int i, unsigned val) +{ + edma_write(offset + (i << 2), val); +} +static inline void edma_modify_array(int offset, int i, + unsigned and, unsigned or) +{ + edma_modify(offset + (i << 2), and, or); +} +static inline void edma_or_array(int offset, int i, unsigned or) +{ + edma_or(offset + (i << 2), or); +} +static inline void edma_or_array2(int offset, int i, int j, unsigned or) +{ + edma_or(offset + ((i*2 + j) << 2), or); +} +static inline void edma_write_array2(int offset, int i, int j, unsigned val) +{ + edma_write(offset + ((i*2 + j) << 2), val); +} +static inline unsigned int edma_shadow0_read(int offset) +{ + return edma_read(EDMA_SHADOW0 + offset); +} +static inline unsigned int edma_shadow0_read_array(int offset, int i) +{ + return edma_read(EDMA_SHADOW0 + offset + (i << 2)); +} +static inline void edma_shadow0_write(int offset, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset, val); +} +static inline void edma_shadow0_write_array(int offset, int i, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset + (i << 2), val); +} +static inline unsigned int edma_parm_read(int offset, int param_no) +{ + return edma_read(EDMA_PARM + offset + (param_no << 5)); +} +static inline void edma_parm_write(int offset, int param_no, unsigned val) +{ + edma_write(EDMA_PARM + offset + (param_no << 5), val); +} +static inline void edma_parm_modify(int offset, int param_no, + unsigned and, unsigned or) +{ + edma_modify(EDMA_PARM + offset + (param_no << 5), and, or); +} +static inline void edma_parm_and(int offset, int param_no, unsigned and) +{ + edma_and(EDMA_PARM + offset + (param_no << 5), and); +} +static inline void edma_parm_or(int offset, int param_no, unsigned or) +{ + edma_or(EDMA_PARM + offset + (param_no << 5), or); +} + +/*****************************************************************************/ + +/* actual number of DMA channels and slots on this silicon */ +static unsigned num_channels; +static unsigned num_slots; + +static struct dma_interrupt_data { + void (*callback)(unsigned channel, unsigned short ch_status, + void *data); + void *data; +} intr_data[EDMA_MAX_DMACH]; + +/* The edma_inuse bit for each PaRAM slot is clear unless the + * channel is in use ... by ARM or DSP, for QDMA, or whatever. + */ +static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY); + +/* The edma_noevent bit for each channel is clear unless + * it doesn't trigger DMA events on this platform. It uses a + * bit of SOC-specific initialization code. + */ +static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH); + +/* dummy param set used to (re)initialize parameter RAM slots */ +static const struct edmacc_param dummy_paramset = { + .link_bcntrld = 0xffff, + .ccnt = 1, +}; + +static const int __initconst +queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = { +/* {event queue no, TC no} */ + {0, 0}, + {1, 1}, + {-1, -1} +}; + +static const int __initconst +queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = { + /* {event queue no, Priority} */ + {0, 3}, + {1, 7}, + {-1, -1} +}; + +/*****************************************************************************/ + +static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no) +{ + int bit = (ch_no & 0x7) * 4; + + /* default to low priority queue */ + if (queue_no == EVENTQ_DEFAULT) + queue_no = EVENTQ_1; + + queue_no &= 7; + edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3), + ~(0x7 << bit), queue_no << bit); +} + +static void __init map_queue_tc(int queue_no, int tc_no) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit)); +} + +static void __init assign_priority_to_queue(int queue_no, int priority) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit)); +} + +static inline void +setup_dma_interrupt(unsigned lch, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data) +{ + if (!callback) { + edma_shadow0_write_array(SH_IECR, lch >> 5, + (1 << (lch & 0x1f))); + } + + intr_data[lch].callback = callback; + intr_data[lch].data = data; + + if (callback) { + edma_shadow0_write_array(SH_ICR, lch >> 5, + (1 << (lch & 0x1f))); + edma_shadow0_write_array(SH_IESR, lch >> 5, + (1 << (lch & 0x1f))); + } +} + +/****************************************************************************** + * + * DMA interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_irq_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_irq_handler\n"); + + if ((edma_shadow0_read_array(SH_IPR, 0) == 0) + && (edma_shadow0_read_array(SH_IPR, 1) == 0)) + return IRQ_NONE; + + while (1) { + int j; + if (edma_shadow0_read_array(SH_IPR, 0)) + j = 0; + else if (edma_shadow0_read_array(SH_IPR, 1)) + j = 1; + else + break; + dev_dbg(data, "IPR%d %08x\n", j, + edma_shadow0_read_array(SH_IPR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_shadow0_write_array(SH_ICR, j, (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, DMA_COMPLETE, + intr_data[k].data); + } + } + } + cnt++; + if (cnt > 10) + break; + } + edma_shadow0_write(SH_IEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * DMA error interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_ccerr_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_ccerr_handler\n"); + + if ((edma_read_array(EDMA_EMR, 0) == 0) && + (edma_read_array(EDMA_EMR, 1) == 0) && + (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0)) + return IRQ_NONE; + + while (1) { + int j = -1; + if (edma_read_array(EDMA_EMR, 0)) + j = 0; + else if (edma_read_array(EDMA_EMR, 1)) + j = 1; + if (j >= 0) { + dev_dbg(data, "EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_read_array(EDMA_EMR, j) & (1 << i)) { + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, 1 << i); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, + (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, + DMA_CC_ERROR, + intr_data + [k].data); + } + } + } + } else if (edma_read(EDMA_QEMR)) { + dev_dbg(data, "QEMR %02x\n", + edma_read(EDMA_QEMR)); + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_QEMR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_QEMCR, 1 << i); + edma_shadow0_write(SH_QSECR, (1 << i)); + + /* NOTE: not reported!! */ + } + } + } else if (edma_read(EDMA_CCERR)) { + dev_dbg(data, "CCERR %08x\n", + edma_read(EDMA_CCERR)); + /* FIXME: CCERR.BIT(16) ignored! much better + * to just write CCERRCLR with CCERR value... + */ + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_CCERR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_CCERRCLR, 1 << i); + + /* NOTE: not reported!! */ + } + } + } + if ((edma_read_array(EDMA_EMR, 0) == 0) + && (edma_read_array(EDMA_EMR, 1) == 0) + && (edma_read(EDMA_QEMR) == 0) + && (edma_read(EDMA_CCERR) == 0)) { + break; + } + cnt++; + if (cnt > 10) + break; + } + edma_write(EDMA_EEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * Transfer controller error interrupt handlers + * + *****************************************************************************/ + +#define tc_errs_handled false /* disabled as long as they're NOPs */ + +static irqreturn_t dma_tc0err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc0err_handler\n"); + return IRQ_HANDLED; +} + +static irqreturn_t dma_tc1err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc1err_handler\n"); + return IRQ_HANDLED; +} + +/*-----------------------------------------------------------------------*/ + +/* Resource alloc/free: dma channels, parameter RAM slots */ + +/** + * edma_alloc_channel - allocate DMA channel and paired parameter RAM + * @channel: specific channel to allocate; negative for "any unmapped channel" + * @callback: optional; to be issued on DMA completion or errors + * @data: passed to callback + * @eventq_no: an EVENTQ_* constant, used to choose which Transfer + * Controller (TC) executes requests using this channel. Use + * EVENTQ_DEFAULT unless you really need a high priority queue. + * + * This allocates a DMA channel and its associated parameter RAM slot. + * The parameter RAM is initialized to hold a dummy transfer. + * + * Normal use is to pass a specific channel number as @channel, to make + * use of hardware events mapped to that channel. When the channel will + * be used only for software triggering or event chaining, channels not + * mapped to hardware events (or mapped to unused events) are preferable. + * + * DMA transfers start from a channel using edma_start(), or by + * chaining. When the transfer described in that channel's parameter RAM + * slot completes, that slot's data may be reloaded through a link. + * + * DMA errors are only reported to the @callback associated with the + * channel driving that transfer, but transfer completion callbacks can + * be sent to another channel under control of the TCC field in + * the option word of the transfer's parameter RAM set. Drivers must not + * use DMA transfer completion callbacks for channels they did not allocate. + * (The same applies to TCC codes used in transfer chaining.) + * + * Returns the number of the channel, else negative errno. + */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, + enum dma_event_q eventq_no) +{ + if (channel < 0) { + channel = 0; + for (;;) { + channel = find_next_bit(edma_noevent, + num_channels, channel); + if (channel == num_channels) + return -ENOMEM; + if (!test_and_set_bit(channel, edma_inuse)) + break; + channel++; + } + } else if (channel >= num_channels) { + return -EINVAL; + } else if (test_and_set_bit(channel, edma_inuse)) { + return -EBUSY; + } + + /* ensure access through shadow region 0 */ + edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f)); + + /* ensure no events are pending */ + edma_stop(channel); + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + + if (callback) + setup_dma_interrupt(channel, callback, data); + + map_dmach_queue(channel, eventq_no); + + return channel; +} +EXPORT_SYMBOL(edma_alloc_channel); + + +/** + * edma_free_channel - deallocate DMA channel + * @channel: dma channel returned from edma_alloc_channel() + * + * This deallocates the DMA channel and associated parameter RAM slot + * allocated by edma_alloc_channel(). + * + * Callers are responsible for ensuring the channel is inactive, and + * will not be reactivated by linking, chaining, or software calls to + * edma_start(). + */ +void edma_free_channel(unsigned channel) +{ + if (channel >= num_channels) + return; + + setup_dma_interrupt(channel, NULL, NULL); + /* REVISIT should probably take out of shadow region 0 */ + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + clear_bit(channel, edma_inuse); +} +EXPORT_SYMBOL(edma_free_channel); + +/** + * edma_alloc_slot - allocate DMA parameter RAM + * @slot: specific slot to allocate; negative for "any unused slot" + * + * This allocates a parameter RAM slot, initializing it to hold a + * dummy transfer. Slots allocated using this routine have not been + * mapped to a hardware DMA channel, and will normally be used by + * linking to them from a slot associated with a DMA channel. + * + * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific + * slots may be allocated on behalf of DSP firmware. + * + * Returns the number of the slot, else negative errno. + */ +int edma_alloc_slot(int slot) +{ + if (slot < 0) { + slot = num_channels; + for (;;) { + slot = find_next_zero_bit(edma_inuse, + num_slots, slot); + if (slot == num_slots) + return -ENOMEM; + if (!test_and_set_bit(slot, edma_inuse)) + break; + } + } else if (slot < num_channels || slot >= num_slots) { + return -EINVAL; + } else if (test_and_set_bit(slot, edma_inuse)) { + return -EBUSY; + } + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + + return slot; +} +EXPORT_SYMBOL(edma_alloc_slot); + +/** + * edma_free_slot - deallocate DMA parameter RAM + * @slot: parameter RAM slot returned from edma_alloc_slot() + * + * This deallocates the parameter RAM slot allocated by edma_alloc_slot(). + * Callers are responsible for ensuring the slot is inactive, and will + * not be activated. + */ +void edma_free_slot(unsigned slot) +{ + if (slot < num_channels || slot >= num_slots) + return; + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + clear_bit(slot, edma_inuse); +} +EXPORT_SYMBOL(edma_free_slot); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (i) -- read/write partial slots */ + +/** + * edma_set_src - set initial DMA source address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @src_port: physical address of source (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the source address is modified during the DMA transfer + * according to edma_set_src_index(). + */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set SAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8)); + } else { + /* clear SAM */ + i &= ~SAM; + } + edma_parm_write(PARM_OPT, slot, i); + + /* set the source port address + in source register of param structure */ + edma_parm_write(PARM_SRC, slot, src_port); + } +} +EXPORT_SYMBOL(edma_set_src); + +/** + * edma_set_dest - set initial DMA destination address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @dest_port: physical address of destination (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the destination address is modified during the DMA transfer + * according to edma_set_dest_index(). + */ +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set DAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8)); + } else { + /* clear DAM */ + i &= ~DAM; + } + edma_parm_write(PARM_OPT, slot, i); + /* set the destination port address + in dest register of param structure */ + edma_parm_write(PARM_DST, slot, dest_port); + } +} +EXPORT_SYMBOL(edma_set_dest); + +/** + * edma_get_position - returns the current transfer points + * @slot: parameter RAM slot being examined + * @src: pointer to source port position + * @dst: pointer to destination port position + * + * Returns current source and destination addresses for a particular + * parameter RAM slot. Its channel should not be active when this is called. + */ +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst) +{ + struct edmacc_param temp; + + edma_read_slot(slot, &temp); + if (src != NULL) + *src = temp.src; + if (dst != NULL) + *dst = temp.dst; +} +EXPORT_SYMBOL(edma_get_position); + +/** + * edma_set_src_index - configure DMA source address indexing + * @slot: parameter RAM slot being configured + * @src_bidx: byte offset between source arrays in a frame + * @src_cidx: byte offset between source frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0xffff0000, src_bidx); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0xffff0000, src_cidx); + } +} +EXPORT_SYMBOL(edma_set_src_index); + +/** + * edma_set_dest_index - configure DMA destination address indexing + * @slot: parameter RAM slot being configured + * @dest_bidx: byte offset between destination arrays in a frame + * @dest_cidx: byte offset between destination frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0x0000ffff, dest_bidx << 16); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0x0000ffff, dest_cidx << 16); + } +} +EXPORT_SYMBOL(edma_set_dest_index); + +/** + * edma_set_transfer_params - configure DMA transfer parameters + * @slot: parameter RAM slot being configured + * @acnt: how many bytes per array (at least one) + * @bcnt: how many arrays per frame (at least one) + * @ccnt: how many frames per block (at least one) + * @bcnt_rld: used only for A-Synchronized transfers; this specifies + * the value to reload into bcnt when it decrements to zero + * @sync_mode: ASYNC or ABSYNC + * + * See the EDMA3 documentation to understand how to configure and link + * transfers using the fields in PaRAM slots. If you are not doing it + * all at once with edma_write_slot(), you will use this routine + * plus two calls each for source and destination, setting the initial + * address and saying how to index that address. + * + * An example of an A-Synchronized transfer is a serial link using a + * single word shift register. In that case, @acnt would be equal to + * that word size; the serial controller issues a DMA synchronization + * event to transfer each word, and memory access by the DMA transfer + * controller will be word-at-a-time. + * + * An example of an AB-Synchronized transfer is a device using a FIFO. + * In that case, @acnt equals the FIFO width and @bcnt equals its depth. + * The controller with the FIFO issues DMA synchronization events when + * the FIFO threshold is reached, and the DMA transfer controller will + * transfer one frame to (or from) the FIFO. It will probably use + * efficient burst modes to access memory. + */ +void edma_set_transfer_params(unsigned slot, + u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_LINK_BCNTRLD, slot, + 0x0000ffff, bcnt_rld << 16); + if (sync_mode == ASYNC) + edma_parm_and(PARM_OPT, slot, ~SYNCDIM); + else + edma_parm_or(PARM_OPT, slot, SYNCDIM); + /* Set the acount, bcount, ccount registers */ + edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt); + edma_parm_write(PARM_CCNT, slot, ccnt); + } +} +EXPORT_SYMBOL(edma_set_transfer_params); + +/** + * edma_link - link one parameter RAM slot to another + * @from: parameter RAM slot originating the link + * @to: parameter RAM slot which is the link target + * + * The originating slot should not be part of any active DMA transfer. + */ +void edma_link(unsigned from, unsigned to) +{ + if (from >= num_slots) + return; + if (to >= num_slots) + return; + edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to)); +} +EXPORT_SYMBOL(edma_link); + +/** + * edma_unlink - cut link from one parameter RAM slot + * @from: parameter RAM slot originating the link + * + * The originating slot should not be part of any active DMA transfer. + * Its link is set to 0xffff. + */ +void edma_unlink(unsigned from) +{ + if (from >= num_slots) + return; + edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff); +} +EXPORT_SYMBOL(edma_unlink); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (ii) -- read/write whole parameter sets */ + +/** + * edma_write_slot - write parameter RAM data for slot + * @slot: number of parameter RAM slot being modified + * @param: data to be written into parameter RAM slot + * + * Use this to assign all parameters of a transfer at once. This + * allows more efficient setup of transfers than issuing multiple + * calls to set up those parameters in small pieces, and provides + * complete control over all transfer options. + */ +void edma_write_slot(unsigned slot, const struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE); +} +EXPORT_SYMBOL(edma_write_slot); + +/** + * edma_read_slot - read parameter RAM data from slot + * @slot: number of parameter RAM slot being copied + * @param: where to store copy of parameter RAM data + * + * Use this to read data from a parameter RAM slot, perhaps to + * save them as a template for later reuse. + */ +void edma_read_slot(unsigned slot, struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE); +} +EXPORT_SYMBOL(edma_read_slot); + +/*-----------------------------------------------------------------------*/ + +/* Various EDMA channel control operations */ + +/** + * edma_pause - pause dma on a channel + * @channel: on which edma_start() has been called + * + * This temporarily disables EDMA hardware events on the specified channel, + * preventing them from triggering new transfers on its behalf + */ +void edma_pause(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_pause); + +/** + * edma_resume - resumes dma on a paused channel + * @channel: on which edma_pause() has been called + * + * This re-enables EDMA hardware events on the specified channel. + */ +void edma_resume(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EESR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_resume); + +/** + * edma_start - start dma on a channel + * @channel: channel being activated + * + * Channels with event associations will be triggered by their hardware + * events, and channels without such associations will be triggered by + * software. (At this writing there is no interface for using software + * triggers except with channels that don't support hardware triggers.) + * + * Returns zero on success, else negative errno. + */ +int edma_start(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + /* EDMA channels without event association */ + if (test_bit(channel, edma_noevent)) { + pr_debug("EDMA: ESR%d %08x\n", j, + edma_shadow0_read_array(SH_ESR, j)); + edma_shadow0_write_array(SH_ESR, j, mask); + return 0; + } + + /* EDMA channel with event association */ + pr_debug("EDMA: ER%d %08x\n", j, + edma_shadow0_read_array(SH_ER, j)); + /* Clear any pending error */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_shadow0_write_array(SH_EESR, j, mask); + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + return 0; + } + + return -EINVAL; +} +EXPORT_SYMBOL(edma_start); + +/** + * edma_stop - stops dma on the channel passed + * @channel: channel being deactivated + * + * When @lch is a channel, any active transfer is paused and + * all pending hardware events are cleared. The current transfer + * may not be resumed, and the channel's Parameter RAM should be + * reinitialized before being reused. + */ +void edma_stop(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, j, mask); + edma_shadow0_write_array(SH_ECR, j, mask); + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write_array(EDMA_EMCR, j, mask); + + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + + /* REVISIT: consider guarding against inappropriate event + * chaining by overwriting with dummy_paramset. + */ + } +} +EXPORT_SYMBOL(edma_stop); + +/****************************************************************************** + * + * It cleans ParamEntry qand bring back EDMA to initial state if media has + * been removed before EDMA has finished.It is usedful for removable media. + * Arguments: + * ch_no - channel no + * + * Return: zero on success, or corresponding error no on failure + * + * FIXME this should not be needed ... edma_stop() should suffice. + * + *****************************************************************************/ + +void edma_clean_channel(unsigned channel) +{ + if (channel < num_channels) { + int j = (channel >> 5); + unsigned int mask = 1 << (channel & 0x1f); + + pr_debug("EDMA: EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + edma_shadow0_write_array(SH_ECR, j, mask); + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3); + } +} +EXPORT_SYMBOL(edma_clean_channel); + +/* + * edma_clear_event - clear an outstanding event on the DMA channel + * Arguments: + * channel - channel number + */ +void edma_clear_event(unsigned channel) +{ + if (channel >= num_channels) + return; + if (channel < 32) + edma_write(EDMA_ECR, 1 << channel); + else + edma_write(EDMA_ECRH, 1 << (channel - 32)); +} +EXPORT_SYMBOL(edma_clear_event); + +/*-----------------------------------------------------------------------*/ + +static int __init edma_probe(struct platform_device *pdev) +{ + struct edma_soc_info *info = pdev->dev.platform_data; + int i; + int status; + const s8 *noevent; + int irq = 0, err_irq = 0; + struct resource *r; + resource_size_t len; + + if (!info) + return -ENODEV; + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc"); + if (!r) + return -ENODEV; + + len = r->end - r->start + 1; + + r = request_mem_region(r->start, len, r->name); + if (!r) + return -EBUSY; + + edmacc_regs_base = ioremap(r->start, len); + if (!edmacc_regs_base) { + status = -EBUSY; + goto fail1; + } + + num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH); + num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY); + + dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base); + + for (i = 0; i < num_slots; i++) + memcpy_toio(edmacc_regs_base + PARM_OFFSET(i), + &dummy_paramset, PARM_SIZE); + + noevent = info->noevent; + if (noevent) { + while (*noevent != -1) + set_bit(*noevent++, edma_noevent); + } + + irq = platform_get_irq(pdev, 0); + status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + irq, status); + goto fail; + } + + err_irq = platform_get_irq(pdev, 1); + status = request_irq(err_irq, dma_ccerr_handler, 0, + "edma_error", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + err_irq, status); + goto fail; + } + + if (tc_errs_handled) { + status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0, + "edma_tc0", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + IRQ_TCERRINT0, status); + return status; + } + status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0, + "edma_tc1", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d --> %d\n", + IRQ_TCERRINT, status); + return status; + } + } + + /* Everything lives on transfer controller 1 until otherwise specified. + * This way, long transfers on the low priority queue + * started by the codec engine will not cause audio defects. + */ + for (i = 0; i < num_channels; i++) + map_dmach_queue(i, EVENTQ_1); + + /* Event queue to TC mapping */ + for (i = 0; queue_tc_mapping[i][0] != -1; i++) + map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]); + + /* Event queue priority mapping */ + for (i = 0; queue_priority_mapping[i][0] != -1; i++) + assign_priority_to_queue(queue_priority_mapping[i][0], + queue_priority_mapping[i][1]); + + for (i = 0; i < info->n_region; i++) { + edma_write_array2(EDMA_DRAE, i, 0, 0x0); + edma_write_array2(EDMA_DRAE, i, 1, 0x0); + edma_write_array(EDMA_QRAE, i, 0x0); + } + + return 0; + +fail: + if (err_irq) + free_irq(err_irq, NULL); + if (irq) + free_irq(irq, NULL); + iounmap(edmacc_regs_base); +fail1: + release_mem_region(r->start, len); + return status; +} + + +static struct platform_driver edma_driver = { + .driver.name = "edma", +}; + +static int __init edma_init(void) +{ + return platform_driver_probe(&edma_driver, edma_probe); +} +arch_initcall(edma_init); + diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/gpio.c linux-2.6.30-rc4-git/arch/arm/mach-davinci/gpio.c --- linux-2.6.30-rc4/arch/arm/mach-davinci/gpio.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/gpio.c 2009-05-13 09:46:19.000000000 +0200 @@ -20,6 +20,7 @@ #include #include +#include #include #include #include @@ -36,9 +37,10 @@ struct davinci_gpio { static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; +static unsigned __initdata ngpio; /* create a non-inlined version */ -static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio) +static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio) { return __gpio_to_controller(gpio); } @@ -114,9 +116,30 @@ static int __init davinci_gpio_setup(voi { int i, base; - for (i = 0, base = 0; - i < ARRAY_SIZE(chips); - i++, base += 32) { + /* The gpio banks conceptually expose a segmented bitmap, + * and "ngpio" is one more than the largest zero-based + * bit index that's valid. + */ + if (cpu_is_davinci_dm355()) { /* or dm335() */ + ngpio = 104; + } else if (cpu_is_davinci_dm644x()) { /* or dm337() */ + ngpio = 71; + } else if (cpu_is_davinci_dm646x()) { + /* NOTE: each bank has several "reserved" bits, + * unusable as GPIOs. Only 33 of the GPIO numbers + * are usable, and we're not rejecting the others. + */ + ngpio = 43; + } else { + /* if cpu_is_davinci_dm643x() ngpio = 111 */ + pr_err("GPIO setup: how many GPIOs?\n"); + return -EINVAL; + } + + if (WARN_ON(DAVINCI_N_GPIO < ngpio)) + ngpio = DAVINCI_N_GPIO; + + for (i = 0, base = 0; base < ngpio; i++, base += 32) { chips[i].chip.label = "DaVinci"; chips[i].chip.direction_input = davinci_direction_in; @@ -125,7 +148,7 @@ static int __init davinci_gpio_setup(voi chips[i].chip.set = davinci_gpio_set; chips[i].chip.base = base; - chips[i].chip.ngpio = DAVINCI_N_GPIO - base; + chips[i].chip.ngpio = ngpio - base; if (chips[i].chip.ngpio > 32) chips[i].chip.ngpio = 32; @@ -143,11 +166,11 @@ pure_initcall(davinci_gpio_setup); * We expect irqs will normally be set up as input pins, but they can also be * used as output pins ... which is convenient for testing. * - * NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition - * to their GPIOBNK0 irq (but with a bit less overhead). But we don't have - * a good way to hook those up ... + * NOTE: The first few GPIOs also have direct INTC hookups in addition + * to their GPIOBNK0 irq, with a bit less overhead but less flexibility + * on triggering (e.g. no edge options). We don't try to use those. * - * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also + * All those INTC hookups (direct, plus several IRQ banks) can also * serve as EDMA event triggers. */ @@ -235,29 +258,42 @@ gpio_irq_handler(unsigned irq, struct ir } /* - * NOTE: for suspend/resume, probably best to make a sysdev (and class) - * with its suspend/resume calls hooking into the results of the set_wake() + * NOTE: for suspend/resume, probably best to make a platform_device with + * suspend_late/resume_resume calls hooking into results of the set_wake() * calls ... so if no gpios are wakeup events the clock can be disabled, * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0 - * can be set appropriately for GPIOV33 pins. + * (dm6446) can be set appropriately for GPIOV33 pins. */ static int __init davinci_gpio_irq_setup(void) { unsigned gpio, irq, bank; + unsigned bank_irq; struct clk *clk; + u32 binten = 0; + + if (cpu_is_davinci_dm355()) { /* or dm335() */ + bank_irq = IRQ_DM355_GPIOBNK0; + } else if (cpu_is_davinci_dm644x()) { + bank_irq = IRQ_GPIOBNK0; + } else if (cpu_is_davinci_dm646x()) { + bank_irq = IRQ_DM646X_GPIOBNK0; + } else { + printk(KERN_ERR "Don't know first GPIO bank IRQ.\n"); + return -EINVAL; + } clk = clk_get(NULL, "gpio"); if (IS_ERR(clk)) { printk(KERN_ERR "Error %ld getting gpio clock?\n", PTR_ERR(clk)); - return 0; + return PTR_ERR(clk); } - clk_enable(clk); - for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0; - gpio < DAVINCI_N_GPIO; bank++) { + for (gpio = 0, irq = gpio_to_irq(0), bank = 0; + gpio < ngpio; + bank++, bank_irq++) { struct gpio_controller *__iomem g = gpio2controller(gpio); unsigned i; @@ -265,28 +301,28 @@ static int __init davinci_gpio_irq_setup __raw_writel(~0, &g->clr_rising); /* set up all irqs in this bank */ - set_irq_chained_handler(bank, gpio_irq_handler); - set_irq_chip_data(bank, g); - set_irq_data(bank, (void *)irq); + set_irq_chained_handler(bank_irq, gpio_irq_handler); + set_irq_chip_data(bank_irq, g); + set_irq_data(bank_irq, (void *)irq); - for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO; - i++, irq++, gpio++) { + for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { set_irq_chip(irq, &gpio_irqchip); set_irq_chip_data(irq, g); set_irq_handler(irq, handle_simple_irq); set_irq_flags(irq, IRQF_VALID); } + + binten |= BIT(bank); } /* BINTEN -- per-bank interrupt enable. genirq would also let these * bits be set/cleared dynamically. */ - __raw_writel(0x1f, (void *__iomem) + __raw_writel(binten, (void *__iomem) IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08)); printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0)); return 0; } - arch_initcall(davinci_gpio_irq_setup); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/id.c linux-2.6.30-rc4-git/arch/arm/mach-davinci/id.c --- linux-2.6.30-rc4/arch/arm/mach-davinci/id.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/id.c 2009-05-13 09:46:19.000000000 +0200 @@ -15,7 +15,9 @@ #include #include -#define JTAG_ID_BASE 0x01c40028 +#define JTAG_ID_BASE IO_ADDRESS(0x01c40028) + +static unsigned int davinci_revision; struct davinci_id { u8 variant; /* JTAG ID bits 31:28 */ @@ -33,6 +35,20 @@ static struct davinci_id davinci_ids[] _ .manufacturer = 0x017, .type = 0x64460000, }, + { + /* DM646X */ + .part_no = 0xb770, + .variant = 0x0, + .manufacturer = 0x017, + .type = 0x64670000, + }, + { + /* DM355 */ + .part_no = 0xb73b, + .variant = 0x0, + .manufacturer = 0x00f, + .type = 0x03550000, + }, }; /* @@ -42,7 +58,7 @@ static u16 __init davinci_get_part_no(vo { u32 dev_id, part_no; - dev_id = davinci_readl(JTAG_ID_BASE); + dev_id = __raw_readl(JTAG_ID_BASE); part_no = ((dev_id >> 12) & 0xffff); @@ -56,13 +72,19 @@ static u8 __init davinci_get_variant(voi { u32 variant; - variant = davinci_readl(JTAG_ID_BASE); + variant = __raw_readl(JTAG_ID_BASE); variant = (variant >> 28) & 0xf; return variant; } +unsigned int davinci_rev(void) +{ + return davinci_revision >> 16; +} +EXPORT_SYMBOL(davinci_rev); + void __init davinci_check_revision(void) { int i; @@ -75,7 +97,7 @@ void __init davinci_check_revision(void) /* First check only the major version in a safe way */ for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { if (part_no == (davinci_ids[i].part_no)) { - system_rev = davinci_ids[i].type; + davinci_revision = davinci_ids[i].type; break; } } @@ -84,10 +106,11 @@ void __init davinci_check_revision(void) for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { if (part_no == davinci_ids[i].part_no && variant == davinci_ids[i].variant) { - system_rev = davinci_ids[i].type; + davinci_revision = davinci_ids[i].type; break; } } - printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant); + printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n", + davinci_rev(), variant); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/board-dm6446evm.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/board-dm6446evm.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/board-dm6446evm.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/board-dm6446evm.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,20 @@ +/* + * DaVinci DM6446 EVM board specific headers + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or ifndef. + */ + +#ifndef _MACH_DAVINCI_DM6446EVM_H +#define _MACH_DAVINCI_DM6446EVM_H + +#include + +int dm6446evm_eeprom_read(char *buf, off_t off, size_t count); +int dm6446evm_eeprom_write(char *buf, off_t off, size_t count); + +#endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/clkdev.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/clkdev.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/clkdev.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/clkdev.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,13 @@ +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +static inline int __clk_get(struct clk *clk) +{ + return 1; +} + +static inline void __clk_put(struct clk *clk) +{ +} + +#endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/clock.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/clock.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/clock.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/clock.h 2009-05-13 09:46:19.000000000 +0200 @@ -17,6 +17,5 @@ struct clk; extern int clk_register(struct clk *clk); extern void clk_unregister(struct clk *clk); -extern int davinci_clk_init(void); #endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/common.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/common.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/common.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/common.h 2009-05-13 09:46:19.000000000 +0200 @@ -16,6 +16,12 @@ struct sys_timer; extern struct sys_timer davinci_timer; +extern void davinci_irq_init(void); +extern void davinci_map_common_io(void); + +/* parameters describe VBUS sourcing for host mode */ +extern void setup_usb(unsigned mA, unsigned potpgt_msec); + /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/cputype.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/cputype.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/cputype.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/cputype.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,49 @@ +/* + * DaVinci CPU type detection + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * Defines the cpu_is_*() macros for runtime detection of DaVinci + * device type. In addtion, if support for a given device is not + * compiled in to the kernel, the macros return 0 so that + * resulting code can be optimized out. + * + * 2009 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef _ASM_ARCH_CPU_H +#define _ASM_ARCH_CPU_H + +extern unsigned int davinci_rev(void); + +#define IS_DAVINCI_CPU(type, id) \ +static inline int is_davinci_dm ##type(void) \ +{ \ + return (davinci_rev() == (id)) ? 1 : 0; \ +} + +IS_DAVINCI_CPU(644x, 0x6446) +IS_DAVINCI_CPU(646x, 0x6467) +IS_DAVINCI_CPU(355, 0x355) + +#ifdef CONFIG_ARCH_DAVINCI_DM644x +#define cpu_is_davinci_dm644x() is_davinci_dm644x() +#else +#define cpu_is_davinci_dm644x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM646x +#define cpu_is_davinci_dm646x() is_davinci_dm646x() +#else +#define cpu_is_davinci_dm646x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM355 +#define cpu_is_davinci_dm355() is_davinci_dm355() +#else +#define cpu_is_davinci_dm355() 0 +#endif + +#endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/dm644x.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/dm644x.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/dm644x.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/dm644x.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,37 @@ +/* + * This file contains the processor specific definitions + * of the TI DM644x. + * + * Copyright (C) 2008 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __ASM_ARCH_DM644X_H +#define __ASM_ARCH_DM644X_H + +#include +#include + +#define DM644X_EMAC_BASE (0x01C80000) +#define DM644X_EMAC_CNTRL_OFFSET (0x0000) +#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000) +#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000) +#define DM644X_EMAC_MDIO_OFFSET (0x4000) +#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) + +void __init dm644x_init(void); + +#endif /* __ASM_ARCH_DM644X_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/edma.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/edma.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/edma.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/edma.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,228 @@ +/* + * TI DAVINCI dma definitions + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * This EDMA3 programming framework exposes two basic kinds of resource: + * + * Channel Triggers transfers, usually from a hardware event but + * also manually or by "chaining" from DMA completions. + * Each channel is coupled to a Parameter RAM (PaRAM) slot. + * + * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM + * "set"), source and destination addresses, a link to a + * next PaRAM slot (if any), options for the transfer, and + * instructions for updating those addresses. There are + * more than twice as many slots as event channels. + * + * Each PaRAM set describes a sequence of transfers, either for one large + * buffer or for several discontiguous smaller buffers. An EDMA transfer + * is driven only from a channel, which performs the transfers specified + * in its PaRAM slot until there are no more transfers. When that last + * transfer completes, the "link" field may be used to reload the channel's + * PaRAM slot with a new transfer descriptor. + * + * The EDMA Channel Controller (CC) maps requests from channels into physical + * Transfer Controller (TC) requests when the channel triggers (by hardware + * or software events, or by chaining). The two physical DMA channels provided + * by the TCs are thus shared by many logical channels. + * + * DaVinci hardware also has a "QDMA" mechanism which is not currently + * supported through this interface. (DSP firmware uses it though.) + */ + +#ifndef EDMA_H_ +#define EDMA_H_ + +/* PaRAM slots are laid out like this */ +struct edmacc_param { + unsigned int opt; + unsigned int src; + unsigned int a_b_cnt; + unsigned int dst; + unsigned int src_dst_bidx; + unsigned int link_bcntrld; + unsigned int src_dst_cidx; + unsigned int ccnt; +}; + +#define CCINT0_INTERRUPT 16 +#define CCERRINT_INTERRUPT 17 +#define TCERRINT0_INTERRUPT 18 +#define TCERRINT1_INTERRUPT 19 + +/* fields in edmacc_param.opt */ +#define SAM BIT(0) +#define DAM BIT(1) +#define SYNCDIM BIT(2) +#define STATIC BIT(3) +#define EDMA_FWID (0x07 << 8) +#define TCCMODE BIT(11) +#define EDMA_TCC(t) ((t) << 12) +#define TCINTEN BIT(20) +#define ITCINTEN BIT(21) +#define TCCHEN BIT(22) +#define ITCCHEN BIT(23) + +#define TRWORD (0x7<<2) +#define PAENTRY (0x1ff<<5) + +/* Drivers should avoid using these symbolic names for dm644x + * channels, and use platform_device IORESOURCE_DMA resources + * instead. (Other DaVinci chips have different peripherals + * and thus have different DMA channel mappings.) + */ +#define DAVINCI_DMA_MCBSP_TX 2 +#define DAVINCI_DMA_MCBSP_RX 3 +#define DAVINCI_DMA_VPSS_HIST 4 +#define DAVINCI_DMA_VPSS_H3A 5 +#define DAVINCI_DMA_VPSS_PRVU 6 +#define DAVINCI_DMA_VPSS_RSZ 7 +#define DAVINCI_DMA_IMCOP_IMXINT 8 +#define DAVINCI_DMA_IMCOP_VLCDINT 9 +#define DAVINCI_DMA_IMCO_PASQINT 10 +#define DAVINCI_DMA_IMCOP_DSQINT 11 +#define DAVINCI_DMA_SPI_SPIX 16 +#define DAVINCI_DMA_SPI_SPIR 17 +#define DAVINCI_DMA_UART0_URXEVT0 18 +#define DAVINCI_DMA_UART0_UTXEVT0 19 +#define DAVINCI_DMA_UART1_URXEVT1 20 +#define DAVINCI_DMA_UART1_UTXEVT1 21 +#define DAVINCI_DMA_UART2_URXEVT2 22 +#define DAVINCI_DMA_UART2_UTXEVT2 23 +#define DAVINCI_DMA_MEMSTK_MSEVT 24 +#define DAVINCI_DMA_MMCRXEVT 26 +#define DAVINCI_DMA_MMCTXEVT 27 +#define DAVINCI_DMA_I2C_ICREVT 28 +#define DAVINCI_DMA_I2C_ICXEVT 29 +#define DAVINCI_DMA_GPIO_GPINT0 32 +#define DAVINCI_DMA_GPIO_GPINT1 33 +#define DAVINCI_DMA_GPIO_GPINT2 34 +#define DAVINCI_DMA_GPIO_GPINT3 35 +#define DAVINCI_DMA_GPIO_GPINT4 36 +#define DAVINCI_DMA_GPIO_GPINT5 37 +#define DAVINCI_DMA_GPIO_GPINT6 38 +#define DAVINCI_DMA_GPIO_GPINT7 39 +#define DAVINCI_DMA_GPIO_GPBNKINT0 40 +#define DAVINCI_DMA_GPIO_GPBNKINT1 41 +#define DAVINCI_DMA_GPIO_GPBNKINT2 42 +#define DAVINCI_DMA_GPIO_GPBNKINT3 43 +#define DAVINCI_DMA_GPIO_GPBNKINT4 44 +#define DAVINCI_DMA_TIMER0_TINT0 48 +#define DAVINCI_DMA_TIMER1_TINT1 49 +#define DAVINCI_DMA_TIMER2_TINT2 50 +#define DAVINCI_DMA_TIMER3_TINT3 51 +#define DAVINCI_DMA_PWM0 52 +#define DAVINCI_DMA_PWM1 53 +#define DAVINCI_DMA_PWM2 54 + +/*ch_status paramater of callback function possible values*/ +#define DMA_COMPLETE 1 +#define DMA_CC_ERROR 2 +#define DMA_TC1_ERROR 3 +#define DMA_TC2_ERROR 4 + +enum address_mode { + INCR = 0, + FIFO = 1 +}; + +enum fifo_width { + W8BIT = 0, + W16BIT = 1, + W32BIT = 2, + W64BIT = 3, + W128BIT = 4, + W256BIT = 5 +}; + +enum dma_event_q { + EVENTQ_0 = 0, + EVENTQ_1 = 1, + EVENTQ_DEFAULT = -1 +}; + +enum sync_dimension { + ASYNC = 0, + ABSYNC = 1 +}; + +#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ +#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ + +/* alloc/free DMA channels and their dedicated parameter RAM slots */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, enum dma_event_q); +void edma_free_channel(unsigned channel); + +/* alloc/free parameter RAM slots */ +int edma_alloc_slot(int slot); +void edma_free_slot(unsigned slot); + +/* calls that operate on part of a parameter RAM slot */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width); +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width); +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst); +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); +void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode); +void edma_link(unsigned from, unsigned to); +void edma_unlink(unsigned from); + +/* calls that operate on an entire parameter RAM slot */ +void edma_write_slot(unsigned slot, const struct edmacc_param *params); +void edma_read_slot(unsigned slot, struct edmacc_param *params); + +/* channel control operations */ +int edma_start(unsigned channel); +void edma_stop(unsigned channel); +void edma_clean_channel(unsigned channel); +void edma_clear_event(unsigned channel); +void edma_pause(unsigned channel); +void edma_resume(unsigned channel); + +/* UNRELATED TO DMA */ +int davinci_alloc_iram(unsigned size); +void davinci_free_iram(unsigned addr, unsigned size); + +/* platform_data for EDMA driver */ +struct edma_soc_info { + + /* how many dma resources of each type */ + unsigned n_channel; + unsigned n_region; + unsigned n_slot; + unsigned n_tc; + + /* list of channels with no even trigger; terminated by "-1" */ + const s8 *noevent; +}; + +#endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/gpio.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/gpio.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/gpio.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/gpio.h 2009-05-13 09:46:19.000000000 +0200 @@ -15,9 +15,11 @@ #include #include -#include + #include +#define DAVINCI_GPIO_BASE 0x01C67000 + /* * basic gpio routines * @@ -26,23 +28,18 @@ * go through boot loaders. * * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are + * need to pay attention to PINMUX registers to be sure those pins are * used as gpios, not with other peripherals. * * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code should write GPIO(N) or: - * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53) - * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70) - * - * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc - * for now, that's != GPIO(N) + * and maybe for later updates, code may write GPIO(N). These may be + * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip + * may not support all the GPIOs in that range. * * GPIOs can also be on external chips, numbered after the ones built-in * to the DaVinci chip. For now, they won't be usable as IRQ sources. */ -#define GPIO(X) (X) /* 0 <= X <= 70 */ -#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */ -#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */ +#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ struct gpio_controller { u32 dir; @@ -71,12 +68,14 @@ __gpio_to_controller(unsigned gpio) { void *__iomem ptr; - if (gpio < 32) + if (gpio < 32 * 1) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10); - else if (gpio < 64) + else if (gpio < 32 * 2) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38); - else if (gpio < DAVINCI_N_GPIO) + else if (gpio < 32 * 3) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60); + else if (gpio < 32 * 4) + ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88); else ptr = NULL; return ptr; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/hardware.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/hardware.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/hardware.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/hardware.h 2009-05-13 09:46:19.000000000 +0200 @@ -1,9 +1,9 @@ /* - * Common hardware definitions + * Hardware definitions common to all DaVinci family processors * - * Author: Kevin Hilman, MontaVista Software, Inc. + * Author: Kevin Hilman, Deep Root Systems, LLC * - * 2007 (c) MontaVista Software, Inc. This file is licensed under + * 2007 (c) Deep Root Systems, LLC. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. @@ -12,41 +12,16 @@ #define __ASM_ARCH_HARDWARE_H /* - * Base register addresses + * Before you add anything to ths file: + * + * This header is for defines common to ALL DaVinci family chips. + * Anything that is chip specific should go in .h, + * and the chip/board init code should then explicitly include + * .h */ -#define DAVINCI_DMA_3PCC_BASE (0x01C00000) -#define DAVINCI_DMA_3PTC0_BASE (0x01C10000) -#define DAVINCI_DMA_3PTC1_BASE (0x01C10400) -#define DAVINCI_I2C_BASE (0x01C21000) -#define DAVINCI_PWM0_BASE (0x01C22000) -#define DAVINCI_PWM1_BASE (0x01C22400) -#define DAVINCI_PWM2_BASE (0x01C22800) -#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000) -#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800) -#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00) -#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000) -#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000) -#define DAVINCI_IEEE1394_BASE (0x01C60000) -#define DAVINCI_USB_OTG_BASE (0x01C64000) -#define DAVINCI_CFC_ATA_BASE (0x01C66000) -#define DAVINCI_SPI_BASE (0x01C66800) -#define DAVINCI_GPIO_BASE (0x01C67000) -#define DAVINCI_UHPI_BASE (0x01C67800) -#define DAVINCI_VPSS_REGS_BASE (0x01C70000) -#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000) -#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000) -#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000) -#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000) -#define DAVINCI_IMCOP_BASE (0x01CC0000) -#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000) -#define DAVINCI_VLYNQ_BASE (0x01E01000) -#define DAVINCI_MCBSP_BASE (0x01E02000) -#define DAVINCI_MMC_SD_BASE (0x01E10000) -#define DAVINCI_MS_BASE (0x01E20000) -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000) -#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000) +#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 + +/* System control register offsets */ +#define DM64XX_VDD3P3V_PWDN 0x48 #endif /* __ASM_ARCH_HARDWARE_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/io.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/io.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/io.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/io.h 2009-05-13 09:46:19.000000000 +0200 @@ -40,22 +40,12 @@ #else #define IOMEM(x) ((void __force __iomem *)(x)) -/* - * Functions to access the DaVinci IO region - * - * NOTE: - Use davinci_read/write[bwl] for physical register addresses - * - Use __raw_read/write[bwl]() for virtual register addresses - * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses - * - DO NOT use hardcoded virtual addresses to allow changing the - * IO address space again if needed - */ -#define davinci_readb(a) __raw_readb(IO_ADDRESS(a)) -#define davinci_readw(a) __raw_readw(IO_ADDRESS(a)) -#define davinci_readl(a) __raw_readl(IO_ADDRESS(a)) +#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t) +#define __arch_iounmap(v) davinci_iounmap(v) -#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a)) -#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a)) -#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a)) +void __iomem *davinci_ioremap(unsigned long phys, size_t size, + unsigned int type); +void davinci_iounmap(volatile void __iomem *addr); #endif /* __ASSEMBLER__ */ #endif /* __ASM_ARCH_IO_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/irqs.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/irqs.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/irqs.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/irqs.h 2009-05-13 09:46:19.000000000 +0200 @@ -96,10 +96,111 @@ #define IRQ_EMUINT 63 #define DAVINCI_N_AINTC_IRQ 64 -#define DAVINCI_N_GPIO 71 +#define DAVINCI_N_GPIO 104 #define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO) #define ARCH_TIMER_IRQ IRQ_TINT1_TINT34 +/* DaVinci DM6467-specific Interrupts */ +#define IRQ_DM646X_VP_VERTINT0 0 +#define IRQ_DM646X_VP_VERTINT1 1 +#define IRQ_DM646X_VP_VERTINT2 2 +#define IRQ_DM646X_VP_VERTINT3 3 +#define IRQ_DM646X_VP_ERRINT 4 +#define IRQ_DM646X_RESERVED_1 5 +#define IRQ_DM646X_RESERVED_2 6 +#define IRQ_DM646X_WDINT 7 +#define IRQ_DM646X_CRGENINT0 8 +#define IRQ_DM646X_CRGENINT1 9 +#define IRQ_DM646X_TSIFINT0 10 +#define IRQ_DM646X_TSIFINT1 11 +#define IRQ_DM646X_VDCEINT 12 +#define IRQ_DM646X_USBINT 13 +#define IRQ_DM646X_USBDMAINT 14 +#define IRQ_DM646X_PCIINT 15 +#define IRQ_DM646X_TCERRINT2 20 +#define IRQ_DM646X_TCERRINT3 21 +#define IRQ_DM646X_IDE 22 +#define IRQ_DM646X_HPIINT 23 +#define IRQ_DM646X_EMACRXTHINT 24 +#define IRQ_DM646X_EMACRXINT 25 +#define IRQ_DM646X_EMACTXINT 26 +#define IRQ_DM646X_EMACMISCINT 27 +#define IRQ_DM646X_MCASP0TXINT 28 +#define IRQ_DM646X_MCASP0RXINT 29 +#define IRQ_DM646X_RESERVED_3 31 +#define IRQ_DM646X_MCASP1TXINT 32 +#define IRQ_DM646X_VLQINT 38 +#define IRQ_DM646X_UARTINT2 42 +#define IRQ_DM646X_SPINT0 43 +#define IRQ_DM646X_SPINT1 44 +#define IRQ_DM646X_DSP2ARMINT 45 +#define IRQ_DM646X_RESERVED_4 46 +#define IRQ_DM646X_PSCINT 47 +#define IRQ_DM646X_GPIO0 48 +#define IRQ_DM646X_GPIO1 49 +#define IRQ_DM646X_GPIO2 50 +#define IRQ_DM646X_GPIO3 51 +#define IRQ_DM646X_GPIO4 52 +#define IRQ_DM646X_GPIO5 53 +#define IRQ_DM646X_GPIO6 54 +#define IRQ_DM646X_GPIO7 55 +#define IRQ_DM646X_GPIOBNK0 56 +#define IRQ_DM646X_GPIOBNK1 57 +#define IRQ_DM646X_GPIOBNK2 58 +#define IRQ_DM646X_DDRINT 59 +#define IRQ_DM646X_AEMIFINT 60 + +/* DaVinci DM355-specific Interrupts */ +#define IRQ_DM355_CCDC_VDINT0 0 +#define IRQ_DM355_CCDC_VDINT1 1 +#define IRQ_DM355_CCDC_VDINT2 2 +#define IRQ_DM355_IPIPE_HST 3 +#define IRQ_DM355_H3AINT 4 +#define IRQ_DM355_IPIPE_SDR 5 +#define IRQ_DM355_IPIPEIFINT 6 +#define IRQ_DM355_OSDINT 7 +#define IRQ_DM355_VENCINT 8 +#define IRQ_DM355_IMCOPINT 11 +#define IRQ_DM355_RTOINT 13 +#define IRQ_DM355_TINT4 13 +#define IRQ_DM355_TINT2_TINT12 13 +#define IRQ_DM355_UARTINT2 14 +#define IRQ_DM355_TINT5 14 +#define IRQ_DM355_TINT2_TINT34 14 +#define IRQ_DM355_TINT6 15 +#define IRQ_DM355_TINT3_TINT12 15 +#define IRQ_DM355_SPINT1_0 17 +#define IRQ_DM355_SPINT1_1 18 +#define IRQ_DM355_SPINT2_0 19 +#define IRQ_DM355_SPINT2_1 21 +#define IRQ_DM355_TINT7 22 +#define IRQ_DM355_TINT3_TINT34 22 +#define IRQ_DM355_SDIOINT0 23 +#define IRQ_DM355_MMCINT0 26 +#define IRQ_DM355_MSINT 26 +#define IRQ_DM355_MMCINT1 27 +#define IRQ_DM355_PWMINT3 28 +#define IRQ_DM355_SDIOINT1 31 +#define IRQ_DM355_SPINT0_0 42 +#define IRQ_DM355_SPINT0_1 43 +#define IRQ_DM355_GPIO0 44 +#define IRQ_DM355_GPIO1 45 +#define IRQ_DM355_GPIO2 46 +#define IRQ_DM355_GPIO3 47 +#define IRQ_DM355_GPIO4 48 +#define IRQ_DM355_GPIO5 49 +#define IRQ_DM355_GPIO6 50 +#define IRQ_DM355_GPIO7 51 +#define IRQ_DM355_GPIO8 52 +#define IRQ_DM355_GPIO9 53 +#define IRQ_DM355_GPIOBNK0 54 +#define IRQ_DM355_GPIOBNK1 55 +#define IRQ_DM355_GPIOBNK2 56 +#define IRQ_DM355_GPIOBNK3 57 +#define IRQ_DM355_GPIOBNK4 58 +#define IRQ_DM355_GPIOBNK5 59 +#define IRQ_DM355_GPIOBNK6 60 + #endif /* __ASM_ARCH_IRQS_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/mux.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/mux.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/mux.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/mux.h 2009-05-13 09:46:19.000000000 +0200 @@ -1,55 +1,183 @@ /* - * DaVinci pin multiplexing defines + * Table of the DAVINCI register configurations for the PINMUX combinations * * Author: Vladimir Barinov, MontaVista Software, Inc. * + * Based on linux/include/asm-arm/arch-omap/mux.h: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H -#define DAVINCI_MUX_AEAW0 0 -#define DAVINCI_MUX_AEAW1 1 -#define DAVINCI_MUX_AEAW2 2 -#define DAVINCI_MUX_AEAW3 3 -#define DAVINCI_MUX_AEAW4 4 -#define DAVINCI_MUX_AECS4 10 -#define DAVINCI_MUX_AECS5 11 -#define DAVINCI_MUX_VLYNQWD0 12 -#define DAVINCI_MUX_VLYNQWD1 13 -#define DAVINCI_MUX_VLSCREN 14 -#define DAVINCI_MUX_VLYNQEN 15 -#define DAVINCI_MUX_HDIREN 16 -#define DAVINCI_MUX_ATAEN 17 -#define DAVINCI_MUX_RGB666 22 -#define DAVINCI_MUX_RGB888 23 -#define DAVINCI_MUX_LOEEN 24 -#define DAVINCI_MUX_LFLDEN 25 -#define DAVINCI_MUX_CWEN 26 -#define DAVINCI_MUX_CFLDEN 27 -#define DAVINCI_MUX_HPIEN 29 -#define DAVINCI_MUX_1394EN 30 -#define DAVINCI_MUX_EMACEN 31 - -#define DAVINCI_MUX_LEVEL2 32 -#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0) -#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1) -#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2) -#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3) -#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4) -#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5) -#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6) -#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7) -#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8) -#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9) -#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10) -#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16) -#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17) -#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18) +#ifndef __INC_MACH_MUX_H +#define __INC_MACH_MUX_H + +/* System module registers */ +#define PINMUX0 0x00 +#define PINMUX1 0x04 +/* dm355 only */ +#define PINMUX2 0x08 +#define PINMUX3 0x0c +#define PINMUX4 0x10 +#define INTMUX 0x18 +#define EVTMUX 0x1c + +struct mux_config { + const char *name; + const char *mux_reg_name; + const unsigned char mux_reg; + const unsigned char mask_offset; + const unsigned char mask; + const unsigned char mode; + bool debug; +}; + +enum davinci_dm644x_index { + /* ATA and HDDIR functions */ + DM644X_HDIREN, + DM644X_ATAEN, + DM644X_ATAEN_DISABLE, + + /* HPI functions */ + DM644X_HPIEN_DISABLE, + + /* AEAW functions */ + DM644X_AEAW, + + /* Memory Stick */ + DM644X_MSTK, + + /* I2C */ + DM644X_I2C, + + /* ASP function */ + DM644X_MCBSP, + + /* UART1 */ + DM644X_UART1, + + /* UART2 */ + DM644X_UART2, + + /* PWM0 */ + DM644X_PWM0, + + /* PWM1 */ + DM644X_PWM1, + + /* PWM2 */ + DM644X_PWM2, + + /* VLYNQ function */ + DM644X_VLYNQEN, + DM644X_VLSCREN, + DM644X_VLYNQWD, + + /* EMAC and MDIO function */ + DM644X_EMACEN, + + /* GPIO3V[0:16] pins */ + DM644X_GPIO3V, + + /* GPIO pins */ + DM644X_GPIO0, + DM644X_GPIO3, + DM644X_GPIO43_44, + DM644X_GPIO46_47, + + /* VPBE */ + DM644X_RGB666, + + /* LCD */ + DM644X_LOEEN, + DM644X_LFLDEN, +}; + +enum davinci_dm646x_index { + /* ATA function */ + DM646X_ATAEN, + + /* AUDIO Clock */ + DM646X_AUDCK1, + DM646X_AUDCK0, + + /* CRGEN Control */ + DM646X_CRGMUX, + + /* VPIF Control */ + DM646X_STSOMUX_DISABLE, + DM646X_STSIMUX_DISABLE, + DM646X_PTSOMUX_DISABLE, + DM646X_PTSIMUX_DISABLE, + + /* TSIF Control */ + DM646X_STSOMUX, + DM646X_STSIMUX, + DM646X_PTSOMUX_PARALLEL, + DM646X_PTSIMUX_PARALLEL, + DM646X_PTSOMUX_SERIAL, + DM646X_PTSIMUX_SERIAL, +}; + +enum davinci_dm355_index { + /* MMC/SD 0 */ + DM355_MMCSD0, + + /* MMC/SD 1 */ + DM355_SD1_CLK, + DM355_SD1_CMD, + DM355_SD1_DATA3, + DM355_SD1_DATA2, + DM355_SD1_DATA1, + DM355_SD1_DATA0, + + /* I2C */ + DM355_I2C_SDA, + DM355_I2C_SCL, + + /* ASP0 function */ + DM355_MCBSP0_BDX, + DM355_MCBSP0_X, + DM355_MCBSP0_BFSX, + DM355_MCBSP0_BDR, + DM355_MCBSP0_R, + DM355_MCBSP0_BFSR, + + /* SPI0 */ + DM355_SPI0_SDI, + DM355_SPI0_SDENA0, + DM355_SPI0_SDENA1, + + /* IRQ muxing */ + DM355_INT_EDMA_CC, + DM355_INT_EDMA_TC0_ERR, + DM355_INT_EDMA_TC1_ERR, + + /* EDMA event muxing */ + DM355_EVT8_ASP1_TX, + DM355_EVT9_ASP1_RX, + DM355_EVT26_MMC0_RX, +}; -extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable); +#ifdef CONFIG_DAVINCI_MUX +/* setup pin muxing */ +extern void davinci_mux_init(void); +extern int davinci_mux_register(const struct mux_config *pins, + unsigned long size); +extern int davinci_cfg_reg(unsigned long reg_cfg); +#else +/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */ +static inline void davinci_mux_init(void) {} +static inline int davinci_mux_register(const struct mux_config *pins, + unsigned long size) { return 0; } +static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; } +#endif -#endif /* __ASM_ARCH_MUX_H */ +#endif /* __INC_MACH_MUX_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/psc.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/psc.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/psc.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/psc.h 2009-05-13 09:46:19.000000000 +0200 @@ -38,8 +38,6 @@ #define DAVINCI_LPSC_TPTC1 4 #define DAVINCI_LPSC_EMAC 5 #define DAVINCI_LPSC_EMAC_WRAPPER 6 -#define DAVINCI_LPSC_MDIO 7 -#define DAVINCI_LPSC_IEEE1394 8 #define DAVINCI_LPSC_USB 9 #define DAVINCI_LPSC_ATA 10 #define DAVINCI_LPSC_VLYNQ 11 @@ -47,7 +45,6 @@ #define DAVINCI_LPSC_DDR_EMIF 13 #define DAVINCI_LPSC_AEMIF 14 #define DAVINCI_LPSC_MMC_SD 15 -#define DAVINCI_LPSC_MEMSTICK 16 #define DAVINCI_LPSC_McBSP 17 #define DAVINCI_LPSC_I2C 18 #define DAVINCI_LPSC_UART0 19 @@ -73,4 +70,54 @@ #define DAVINCI_LPSC_GEM 39 #define DAVINCI_LPSC_IMCOP 40 +#define DM355_LPSC_TIMER3 5 +#define DM355_LPSC_SPI1 6 +#define DM355_LPSC_MMC_SD1 7 +#define DM355_LPSC_McBSP1 8 +#define DM355_LPSC_PWM3 10 +#define DM355_LPSC_SPI2 11 +#define DM355_LPSC_RTO 12 +#define DM355_LPSC_VPSS_DAC 41 + +/* + * LPSC Assignments + */ +#define DM646X_LPSC_ARM 0 +#define DM646X_LPSC_C64X_CPU 1 +#define DM646X_LPSC_HDVICP0 2 +#define DM646X_LPSC_HDVICP1 3 +#define DM646X_LPSC_TPCC 4 +#define DM646X_LPSC_TPTC0 5 +#define DM646X_LPSC_TPTC1 6 +#define DM646X_LPSC_TPTC2 7 +#define DM646X_LPSC_TPTC3 8 +#define DM646X_LPSC_PCI 13 +#define DM646X_LPSC_EMAC 14 +#define DM646X_LPSC_VDCE 15 +#define DM646X_LPSC_VPSSMSTR 16 +#define DM646X_LPSC_VPSSSLV 17 +#define DM646X_LPSC_TSIF0 18 +#define DM646X_LPSC_TSIF1 19 +#define DM646X_LPSC_DDR_EMIF 20 +#define DM646X_LPSC_AEMIF 21 +#define DM646X_LPSC_McASP0 22 +#define DM646X_LPSC_McASP1 23 +#define DM646X_LPSC_CRGEN0 24 +#define DM646X_LPSC_CRGEN1 25 +#define DM646X_LPSC_UART0 26 +#define DM646X_LPSC_UART1 27 +#define DM646X_LPSC_UART2 28 +#define DM646X_LPSC_PWM0 29 +#define DM646X_LPSC_PWM1 30 +#define DM646X_LPSC_I2C 31 +#define DM646X_LPSC_SPI 32 +#define DM646X_LPSC_GPIO 33 +#define DM646X_LPSC_TIMER0 34 +#define DM646X_LPSC_TIMER1 35 +#define DM646X_LPSC_ARM_INTC 45 + +extern int davinci_psc_is_clk_active(unsigned int id); +extern void davinci_psc_config(unsigned int domain, unsigned int id, + char enable); + #endif /* __ASM_ARCH_PSC_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/serial.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/serial.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/include/mach/serial.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/include/mach/serial.h 2009-05-13 09:46:19.000000000 +0200 @@ -13,8 +13,23 @@ #include -#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) -#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) -#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) +#define DAVINCI_MAX_NR_UARTS 3 +#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) +#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) +#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) + +#define DM355_UART2_BASE (IO_PHYS + 0x206000) + +/* DaVinci UART register offsets */ +#define UART_DAVINCI_PWREMU 0x0c +#define UART_DM646X_SCR 0x10 +#define UART_DM646X_SCR_TX_WATERMARK 0x08 + +struct davinci_uart_config { + /* Bit field of UARTs present; bit 0 --> UART1 */ + unsigned int enabled_uarts; +}; + +extern void davinci_serial_init(struct davinci_uart_config *); #endif /* __ASM_ARCH_SERIAL_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/io.c linux-2.6.30-rc4-git/arch/arm/mach-davinci/io.c --- linux-2.6.30-rc4/arch/arm/mach-davinci/io.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/io.c 2009-05-13 09:46:19.000000000 +0200 @@ -51,7 +51,26 @@ void __init davinci_map_common_io(void) davinci_check_revision(); } -void __init davinci_init_common_hw(void) +#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) +#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst))) + +/* + * Intercept ioremap() requests for addresses in our fixed mapping regions. + */ +void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type) +{ + if (BETWEEN(p, IO_PHYS, IO_SIZE)) + return XLATE(p, IO_PHYS, IO_VIRT); + + return __arm_ioremap(p, size, type); +} +EXPORT_SYMBOL(davinci_ioremap); + +void davinci_iounmap(volatile void __iomem *addr) { - davinci_clk_init(); + unsigned long virt = (unsigned long)addr; + + if (virt >= VMALLOC_START && virt < VMALLOC_END) + __iounmap(addr); } +EXPORT_SYMBOL(davinci_iounmap); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/irq.c linux-2.6.30-rc4-git/arch/arm/mach-davinci/irq.c --- linux-2.6.30-rc4/arch/arm/mach-davinci/irq.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/irq.c 2009-05-13 09:46:19.000000000 +0200 @@ -25,6 +25,7 @@ #include #include +#include #include #define IRQ_BIT(irq) ((irq) & 0x1f) @@ -40,14 +41,18 @@ #define IRQ_INTPRI0_REG_OFFSET 0x0030 #define IRQ_INTPRI7_REG_OFFSET 0x004C +const u8 *davinci_def_priorities; + +#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE) + static inline unsigned int davinci_irq_readl(int offset) { - return davinci_readl(DAVINCI_ARM_INTC_BASE + offset); + return __raw_readl(INTC_BASE + offset); } static inline void davinci_irq_writel(unsigned long value, int offset) { - davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset); + __raw_writel(value, INTC_BASE + offset); } /* Disable interrupt */ @@ -108,9 +113,8 @@ static struct irq_chip davinci_irq_chip_ .unmask = davinci_unmask_irq, }; - /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ -static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { +static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { [IRQ_VDINT0] = 2, [IRQ_VDINT1] = 6, [IRQ_VDINT2] = 6, @@ -177,11 +181,149 @@ static const u8 default_priorities[DAVIN [IRQ_EMUINT] = 7, }; +static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM646X_VP_VERTINT0] = 7, + [IRQ_DM646X_VP_VERTINT1] = 7, + [IRQ_DM646X_VP_VERTINT2] = 7, + [IRQ_DM646X_VP_VERTINT3] = 7, + [IRQ_DM646X_VP_ERRINT] = 7, + [IRQ_DM646X_RESERVED_1] = 7, + [IRQ_DM646X_RESERVED_2] = 7, + [IRQ_DM646X_WDINT] = 7, + [IRQ_DM646X_CRGENINT0] = 7, + [IRQ_DM646X_CRGENINT1] = 7, + [IRQ_DM646X_TSIFINT0] = 7, + [IRQ_DM646X_TSIFINT1] = 7, + [IRQ_DM646X_VDCEINT] = 7, + [IRQ_DM646X_USBINT] = 7, + [IRQ_DM646X_USBDMAINT] = 7, + [IRQ_DM646X_PCIINT] = 7, + [IRQ_CCINT0] = 7, /* dma */ + [IRQ_CCERRINT] = 7, /* dma */ + [IRQ_TCERRINT0] = 7, /* dma */ + [IRQ_TCERRINT] = 7, /* dma */ + [IRQ_DM646X_TCERRINT2] = 7, + [IRQ_DM646X_TCERRINT3] = 7, + [IRQ_DM646X_IDE] = 7, + [IRQ_DM646X_HPIINT] = 7, + [IRQ_DM646X_EMACRXTHINT] = 7, + [IRQ_DM646X_EMACRXINT] = 7, + [IRQ_DM646X_EMACTXINT] = 7, + [IRQ_DM646X_EMACMISCINT] = 7, + [IRQ_DM646X_MCASP0TXINT] = 7, + [IRQ_DM646X_MCASP0RXINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM646X_RESERVED_3] = 7, + [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ + [IRQ_TINT0_TINT34] = 7, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_DM646X_VLQINT] = 7, + [IRQ_I2C] = 7, + [IRQ_UARTINT0] = 7, + [IRQ_UARTINT1] = 7, + [IRQ_DM646X_UARTINT2] = 7, + [IRQ_DM646X_SPINT0] = 7, + [IRQ_DM646X_SPINT1] = 7, + [IRQ_DM646X_DSP2ARMINT] = 7, + [IRQ_DM646X_RESERVED_4] = 7, + [IRQ_DM646X_PSCINT] = 7, + [IRQ_DM646X_GPIO0] = 7, + [IRQ_DM646X_GPIO1] = 7, + [IRQ_DM646X_GPIO2] = 7, + [IRQ_DM646X_GPIO3] = 7, + [IRQ_DM646X_GPIO4] = 7, + [IRQ_DM646X_GPIO5] = 7, + [IRQ_DM646X_GPIO6] = 7, + [IRQ_DM646X_GPIO7] = 7, + [IRQ_DM646X_GPIOBNK0] = 7, + [IRQ_DM646X_GPIOBNK1] = 7, + [IRQ_DM646X_GPIOBNK2] = 7, + [IRQ_DM646X_DDRINT] = 7, + [IRQ_DM646X_AEMIFINT] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + +static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM355_CCDC_VDINT0] = 2, + [IRQ_DM355_CCDC_VDINT1] = 6, + [IRQ_DM355_CCDC_VDINT2] = 6, + [IRQ_DM355_IPIPE_HST] = 6, + [IRQ_DM355_H3AINT] = 6, + [IRQ_DM355_IPIPE_SDR] = 6, + [IRQ_DM355_IPIPEIFINT] = 6, + [IRQ_DM355_OSDINT] = 7, + [IRQ_DM355_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_USBINT] = 4, + [IRQ_DM355_RTOINT] = 4, + [IRQ_DM355_UARTINT2] = 7, + [IRQ_DM355_TINT6] = 7, + [IRQ_CCINT0] = 5, /* dma */ + [IRQ_CCERRINT] = 5, /* dma */ + [IRQ_TCERRINT0] = 5, /* dma */ + [IRQ_TCERRINT] = 5, /* dma */ + [IRQ_DM355_SPINT2_1] = 7, + [IRQ_DM355_TINT7] = 4, + [IRQ_DM355_SDIOINT0] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_DM355_MMCINT1] = 7, + [IRQ_DM355_PWMINT3] = 7, + [IRQ_DDRINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM355_SDIOINT1] = 4, + [IRQ_TINT0_TINT12] = 2, /* clockevent */ + [IRQ_TINT0_TINT34] = 2, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_PWMINT2] = 7, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_DM355_SPINT0_0] = 3, + [IRQ_DM355_SPINT0_1] = 3, + [IRQ_DM355_GPIO0] = 3, + [IRQ_DM355_GPIO1] = 7, + [IRQ_DM355_GPIO2] = 4, + [IRQ_DM355_GPIO3] = 4, + [IRQ_DM355_GPIO4] = 7, + [IRQ_DM355_GPIO5] = 7, + [IRQ_DM355_GPIO6] = 7, + [IRQ_DM355_GPIO7] = 7, + [IRQ_DM355_GPIO8] = 7, + [IRQ_DM355_GPIO9] = 7, + [IRQ_DM355_GPIOBNK0] = 7, + [IRQ_DM355_GPIOBNK1] = 7, + [IRQ_DM355_GPIOBNK2] = 7, + [IRQ_DM355_GPIOBNK3] = 7, + [IRQ_DM355_GPIOBNK4] = 7, + [IRQ_DM355_GPIOBNK5] = 7, + [IRQ_DM355_GPIOBNK6] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + /* ARM Interrupt Controller Initialization */ void __init davinci_irq_init(void) { unsigned i; - const u8 *priority = default_priorities; + + if (cpu_is_davinci_dm644x()) + davinci_def_priorities = dm644x_default_priorities; + else if (cpu_is_davinci_dm646x()) + davinci_def_priorities = dm646x_default_priorities; + else if (cpu_is_davinci_dm355()) + davinci_def_priorities = dm355_default_priorities; /* Clear all interrupt requests */ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); @@ -209,8 +351,8 @@ void __init davinci_irq_init(void) unsigned j; u32 pri; - for (j = 0, pri = 0; j < 32; j += 4, priority++) - pri |= (*priority & 0x07) << j; + for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++) + pri |= (*davinci_def_priorities & 0x07) << j; davinci_irq_writel(pri, i); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/Kconfig linux-2.6.30-rc4-git/arch/arm/mach-davinci/Kconfig --- linux-2.6.30-rc4/arch/arm/mach-davinci/Kconfig 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/Kconfig 2009-05-13 09:46:19.000000000 +0200 @@ -4,19 +4,56 @@ menu "TI DaVinci Implementations" comment "DaVinci Core Type" -config ARCH_DAVINCI644x - default y +config ARCH_DAVINCI_DM644x bool "DaVinci 644x based system" comment "DaVinci Board Type" config MACH_DAVINCI_EVM - bool "TI DaVinci EVM" + bool "TI DM644x EVM" default y - depends on ARCH_DAVINCI644x + depends on ARCH_DAVINCI_DM644x help Configure this option to specify the whether the board used - for development is a DaVinci EVM + for development is a DM644x EVM + + +config DAVINCI_MUX + bool "DAVINCI multiplexing support" + depends on ARCH_DAVINCI + default y + help + Pin multiplexing support for DAVINCI boards. If your bootloader + sets the multiplexing correctly, say N. Otherwise, or if unsure, + say Y. + +config DAVINCI_MUX_DEBUG + bool "Multiplexing debug output" + depends on DAVINCI_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. + +config DAVINCI_MUX_WARNINGS + bool "Warn about pins the bootloader didn't set up" + depends on DAVINCI_MUX + help + Choose Y here to warn whenever driver initialization logic needs + to change the pin multiplexing setup. When there are no warnings + printed, it's safe to deselect DAVINCI_MUX for your product. + +config DAVINCI_RESET_CLOCKS + bool "Reset unused clocks during boot" + depends on ARCH_DAVINCI + help + Say Y if you want to reset unused clocks during boot. + This option saves power, but assumes all drivers are + using the clock framework. Broken drivers that do not + yet use clock framework may not work with this option. + If you are booting from another operating system, you + probably do not want this option enabled until your + device drivers work properly. endmenu diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/Makefile linux-2.6.30-rc4-git/arch/arm/mach-davinci/Makefile --- linux-2.6.30-rc4/arch/arm/mach-davinci/Makefile 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/Makefile 2009-05-13 09:46:19.000000000 +0200 @@ -5,7 +5,12 @@ # Common objects obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ - gpio.o mux.o devices.o usb.o + gpio.o devices.o dma.o usb.o + +obj-$(CONFIG_DAVINCI_MUX) += mux.o + +# Chip specific +obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o # Board specific -obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o +obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/mux.c linux-2.6.30-rc4-git/arch/arm/mach-davinci/mux.c --- linux-2.6.30-rc4/arch/arm/mach-davinci/mux.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/mux.c 2009-05-13 09:46:19.000000000 +0200 @@ -1,41 +1,103 @@ /* - * DaVinci pin multiplexing configurations + * Utility to set the DAVINCI MUX register from a table in mux.h * * Author: Vladimir Barinov, MontaVista Software, Inc. * + * Based on linux/arch/arm/plat-omap/mux.c: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ #include +#include #include #include - #include -/* System control register offsets */ -#define PINMUX0 0x00 -#define PINMUX1 0x04 +static const struct mux_config *mux_table; +static unsigned long pin_table_sz; -static DEFINE_SPINLOCK(mux_lock); +int __init davinci_mux_register(const struct mux_config *pins, + unsigned long size) +{ + mux_table = pins; + pin_table_sz = size; -void davinci_mux_peripheral(unsigned int mux, unsigned int enable) + return 0; +} + +/* + * Sets the DAVINCI MUX register based on the table + */ +int __init_or_module davinci_cfg_reg(const unsigned long index) { - u32 pinmux, muxreg = PINMUX0; + static DEFINE_SPINLOCK(mux_spin_lock); + void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); + unsigned long flags; + const struct mux_config *cfg; + unsigned int reg_orig = 0, reg = 0; + unsigned int mask, warn = 0; + + if (!mux_table) + BUG(); + + if (index >= pin_table_sz) { + printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", + index, pin_table_sz); + dump_stack(); + return -ENODEV; + } + + cfg = &mux_table[index]; + + if (cfg->name == NULL) { + printk(KERN_ERR "No entry for the specified index\n"); + return -ENODEV; + } + + /* Update the mux register in question */ + if (cfg->mask) { + unsigned tmp1, tmp2; + + spin_lock_irqsave(&mux_spin_lock, flags); + reg_orig = __raw_readl(base + cfg->mux_reg); + + mask = (cfg->mask << cfg->mask_offset); + tmp1 = reg_orig & mask; + reg = reg_orig & ~mask; + + tmp2 = (cfg->mode << cfg->mask_offset); + reg |= tmp2; + + if (tmp1 != tmp2) + warn = 1; + + __raw_writel(reg, base + cfg->mux_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); + } + + if (warn) { +#ifdef CONFIG_DAVINCI_MUX_WARNINGS + printk(KERN_WARNING "MUX: initialized %s\n", cfg->name); +#endif + } - if (mux >= DAVINCI_MUX_LEVEL2) { - muxreg = PINMUX1; - mux -= DAVINCI_MUX_LEVEL2; +#ifdef CONFIG_DAVINCI_MUX_DEBUG + if (cfg->debug || warn) { + printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name); + printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n", + cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg); } +#endif - spin_lock(&mux_lock); - pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg); - if (enable) - pinmux |= (1 << mux); - else - pinmux &= ~(1 << mux); - davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg); - spin_unlock(&mux_lock); + return 0; } +EXPORT_SYMBOL(davinci_cfg_reg); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/mux.h linux-2.6.30-rc4-git/arch/arm/mach-davinci/mux.h --- linux-2.6.30-rc4/arch/arm/mach-davinci/mux.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/mux.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,51 @@ +/* + * Pin-multiplex helper macros for TI DaVinci family devices + * + * Author: Vladimir Barinov, MontaVista Software, Inc. + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright (C) 2008 Texas Instruments. + */ +#ifndef _MACH_DAVINCI_MUX_H_ +#define _MACH_DAVINCI_MUX_H_ + +#include + +#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "PINMUX"#muxreg, \ + .mux_reg = PINMUX##muxreg, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "INTMUX", \ + .mux_reg = INTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "EVTMUX", \ + .mux_reg = EVTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#endif /* _MACH_DAVINCI_MUX_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/psc.c linux-2.6.30-rc4-git/arch/arm/mach-davinci/psc.c --- linux-2.6.30-rc4/arch/arm/mach-davinci/psc.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/psc.c 2009-05-13 09:46:19.000000000 +0200 @@ -23,10 +23,13 @@ #include #include +#include #include #include #include +#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 + /* PSC register offsets */ #define EPCPR 0x070 #define PTCMD 0x120 @@ -36,102 +39,61 @@ #define MDSTAT 0x800 #define MDCTL 0xA00 -/* System control register offsets */ -#define VDD3P3V_PWDN 0x48 +#define MDSTAT_STATE_MASK 0x1f -static void davinci_psc_mux(unsigned int id) +/* Return nonzero iff the domain's clock is active */ +int __init davinci_psc_is_clk_active(unsigned int id) { - switch (id) { - case DAVINCI_LPSC_ATA: - davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1); - davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1); - break; - case DAVINCI_LPSC_MMC_SD: - /* VDD power manupulations are done in U-Boot for CPMAC - * so applies to MMC as well - */ - /*Set up the pull regiter for MMC */ - davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN); - davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0); - break; - case DAVINCI_LPSC_I2C: - davinci_mux_peripheral(DAVINCI_MUX_I2C, 1); - break; - case DAVINCI_LPSC_McBSP: - davinci_mux_peripheral(DAVINCI_MUX_ASP, 1); - break; - default: - break; - } + void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + + /* if clocked, state can be "Enable" or "SyncReset" */ + return mdstat & BIT(12); } /* Enable or disable a PSC domain */ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) { - u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask; + u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; + void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */ + + mdctl = __raw_readl(psc_base + MDCTL + 4 * id); + mdctl &= ~MDSTAT_STATE_MASK; + mdctl |= next_state; + __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); - if (enable) - mdctl |= 0x00000003; /* Enable Module */ - else - mdctl &= 0xFFFFFFF2; /* Disable Module */ - davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); - - pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT); + pdstat = __raw_readl(psc_base + PDSTAT); if ((pdstat & 0x00000001) == 0) { - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x1; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - EPCPR); + epcpr = __raw_readl(psc_base + EPCPR); } while ((((epcpr >> domain) & 1) == 0)); - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x100; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } else { ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - PTSTAT); + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } - if (enable) - mdstat_mask = 0x3; - else - mdstat_mask = 0x2; - do { - mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - MDSTAT + 4 * id); - } while (!((mdstat & 0x0000001F) == mdstat_mask)); - - if (enable) - davinci_psc_mux(id); -} - -void __init davinci_psc_init(void) -{ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1); - - /* Turn on WatchDog timer LPSC. Needed for RESET to work */ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1); + mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + } while (!((mdstat & MDSTAT_STATE_MASK) == next_state)); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/serial.c linux-2.6.30-rc4-git/arch/arm/mach-davinci/serial.c --- linux-2.6.30-rc4/arch/arm/mach-davinci/serial.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/serial.c 2009-05-13 09:46:19.000000000 +0200 @@ -32,32 +32,47 @@ #include #include #include +#include +#include "clock.h" -#define UART_DAVINCI_PWREMU 0x0c - -static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up, - int offset) +static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, + int offset) { offset <<= up->regshift; - return (unsigned int)__raw_readb(up->membase + offset); + return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset); } -static inline void davinci_serial_outp(struct plat_serial8250_port *p, - int offset, int value) +static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, + int value) { offset <<= p->regshift; - __raw_writeb(value, p->membase + offset); + __raw_writel(value, IO_ADDRESS(p->mapbase) + offset); } static struct plat_serial8250_port serial_platform_data[] = { { - .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE), - .mapbase = (unsigned long)DAVINCI_UART0_BASE, + .mapbase = DAVINCI_UART0_BASE, .irq = IRQ_UARTINT0, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART2_BASE, + .irq = IRQ_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = 27000000, }, { .flags = 0 @@ -74,22 +89,68 @@ static struct platform_device serial_dev static void __init davinci_serial_reset(struct plat_serial8250_port *p) { - /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ unsigned int pwremu = 0; - davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */ + serial_write_reg(p, UART_IER, 0); /* disable all interrupts */ - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); mdelay(10); pwremu |= (0x3 << 13); pwremu |= 0x1; - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); + + if (cpu_is_davinci_dm646x()) + serial_write_reg(p, UART_DM646X_SCR, + UART_DM646X_SCR_TX_WATERMARK); +} + +void __init davinci_serial_init(struct davinci_uart_config *info) +{ + int i; + char name[16]; + struct clk *uart_clk; + struct device *dev = &serial_device.dev; + + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) { + struct plat_serial8250_port *p = serial_platform_data + i; + + if (!(info->enabled_uarts & (1 << i))) { + p->flags = 0; + continue; + } + + if (cpu_is_davinci_dm646x()) + p->iotype = UPIO_MEM32; + + if (cpu_is_davinci_dm355()) { + if (i == 2) { + p->mapbase = (unsigned long)DM355_UART2_BASE; + p->irq = IRQ_DM355_UARTINT2; + } + } + + sprintf(name, "uart%d", i); + uart_clk = clk_get(dev, name); + if (IS_ERR(uart_clk)) + printk(KERN_ERR "%s:%d: failed to get UART%d clock\n", + __func__, __LINE__, i); + else { + clk_enable(uart_clk); + p->uartclk = clk_get_rate(uart_clk); + davinci_serial_reset(p); + } + } } static int __init davinci_init(void) { - davinci_serial_reset(&serial_platform_data[0]); return platform_device_register(&serial_device); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/time.c linux-2.6.30-rc4-git/arch/arm/mach-davinci/time.c --- linux-2.6.30-rc4/arch/arm/mach-davinci/time.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/time.c 2009-05-13 09:46:19.000000000 +0200 @@ -16,6 +16,9 @@ #include #include #include +#include +#include +#include #include #include @@ -24,8 +27,11 @@ #include #include #include +#include +#include "clock.h" static struct clock_event_device clockevent_davinci; +static unsigned int davinci_clock_tick_rate; #define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) #define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) @@ -99,9 +105,9 @@ struct timer_s { unsigned int id; unsigned long period; unsigned long opts; - unsigned long reg_base; - unsigned long tim_reg; - unsigned long prd_reg; + void __iomem *base; + unsigned long tim_off; + unsigned long prd_off; unsigned long enamode_shift; struct irqaction irqaction; }; @@ -114,15 +120,15 @@ static struct timer_s timers[]; static int timer32_config(struct timer_s *t) { - u32 tcr = davinci_readl(t->reg_base + TCR); + u32 tcr = __raw_readl(t->base + TCR); /* disable timer */ tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift); - davinci_writel(tcr, t->reg_base + TCR); + __raw_writel(tcr, t->base + TCR); /* reset counter to zero, set new period */ - davinci_writel(0, t->tim_reg); - davinci_writel(t->period, t->prd_reg); + __raw_writel(0, t->base + t->tim_off); + __raw_writel(t->period, t->base + t->prd_off); /* Set enable mode */ if (t->opts & TIMER_OPTS_ONESHOT) { @@ -131,13 +137,13 @@ static int timer32_config(struct timer_s tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift; } - davinci_writel(tcr, t->reg_base + TCR); + __raw_writel(tcr, t->base + TCR); return 0; } static inline u32 timer32_read(struct timer_s *t) { - return davinci_readl(t->tim_reg); + return __raw_readl(t->base + t->tim_off); } static irqreturn_t timer_interrupt(int irq, void *dev_id) @@ -176,51 +182,54 @@ static struct timer_s timers[] = { static void __init timer_init(void) { - u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; + u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; int i; /* Global init of each 64-bit timer as a whole */ for(i=0; i<2; i++) { - u32 tgcr, base = bases[i]; + u32 tgcr; + void __iomem *base = IO_ADDRESS(phys_bases[i]); /* Disabled, Internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset both timers, no pre-scaler for timer34 */ tgcr = 0; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Set both timers to unchained 32-bit */ tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Unreset timers */ tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Init both counters to zero */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); } /* Init of each timer as a 32-bit timer */ for (i=0; i< ARRAY_SIZE(timers); i++) { struct timer_s *t = &timers[i]; + u32 phys_base; if (t->name) { t->id = i; - t->reg_base = (IS_TIMER1(t->id) ? + phys_base = (IS_TIMER1(t->id) ? DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE); + t->base = IO_ADDRESS(phys_base); if (IS_TIMER_BOT(t->id)) { t->enamode_shift = 6; - t->tim_reg = t->reg_base + TIM12; - t->prd_reg = t->reg_base + PRD12; + t->tim_off = TIM12; + t->prd_off = PRD12; } else { t->enamode_shift = 22; - t->tim_reg = t->reg_base + TIM34; - t->prd_reg = t->reg_base + PRD34; + t->tim_off = TIM34; + t->prd_off = PRD34; } /* Register interrupt */ @@ -274,7 +283,7 @@ static void davinci_set_mode(enum clock_ switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - t->period = CLOCK_TICK_RATE / (HZ); + t->period = davinci_clock_tick_rate / (HZ); t->opts = TIMER_OPTS_PERIODIC; timer32_config(t); break; @@ -301,21 +310,29 @@ static struct clock_event_device clockev static void __init davinci_timer_init(void) { + struct clk *timer_clk; + static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; /* init timer hw */ timer_init(); + timer_clk = clk_get(NULL, "timer0"); + BUG_ON(IS_ERR(timer_clk)); + clk_enable(timer_clk); + + davinci_clock_tick_rate = clk_get_rate(timer_clk); + /* setup clocksource */ clocksource_davinci.mult = - clocksource_khz2mult(CLOCK_TICK_RATE/1000, + clocksource_khz2mult(davinci_clock_tick_rate/1000, clocksource_davinci.shift); if (clocksource_register(&clocksource_davinci)) printk(err, clocksource_davinci.name); /* setup clockevent */ - clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, + clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC, clockevent_davinci.shift); clockevent_davinci.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_davinci); @@ -333,42 +350,52 @@ struct sys_timer davinci_timer = { /* reset board using watchdog timer */ void davinci_watchdog_reset(void) { - u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE; + u32 tgcr, wdtcr; + void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE); + struct device dev; + struct clk *wd_clk; + char *name = "watchdog"; + + dev_set_name(&dev, name); + wd_clk = clk_get(&dev, NULL); + if (WARN_ON(IS_ERR(wd_clk))) + return; + clk_enable(wd_clk); /* disable, internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset timer, set mode to 64-bit watchdog, and unreset */ tgcr = 0; - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT; tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); /* clear counter and period regs */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); - davinci_writel(0, base + PRD12); - davinci_writel(0, base + PRD34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); + __raw_writel(0, base + PRD12); + __raw_writel(0, base + PRD34); /* enable */ - wdtcr = davinci_readl(base + WDTCR); + wdtcr = __raw_readl(base + WDTCR); wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in pre-active state */ wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in active state */ wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* write an invalid value to the WDKEY field to trigger * a watchdog reset */ wdtcr = 0x00004000; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-davinci/usb.c linux-2.6.30-rc4-git/arch/arm/mach-davinci/usb.c --- linux-2.6.30-rc4/arch/arm/mach-davinci/usb.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-davinci/usb.c 2009-05-13 09:46:19.000000000 +0200 @@ -14,6 +14,8 @@ #include #include +#define DAVINCI_USB_OTG_BASE 0x01C64000 + #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct musb_hdrc_eps_bits musb_eps[] = { { "ep1_tx", 8, }, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/clock.c linux-2.6.30-rc4-git/arch/arm/mach-imx/clock.c --- linux-2.6.30-rc4/arch/arm/mach-imx/clock.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/clock.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,210 +0,0 @@ -/* - * Copyright (C) 2008 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -#include - -/* - * Very simple approach: We can't disable clocks, so we do - * not need refcounting - */ - -struct clk { - struct list_head node; - const char *name; - unsigned long (*get_rate)(void); -}; - -/* - * get the system pll clock in Hz - * - * mfi + mfn / (mfd +1) - * f = 2 * f_ref * -------------------- - * pd + 1 - */ -static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref) -{ - unsigned long long ll; - unsigned long quot; - - u32 mfi = (pll >> 10) & 0xf; - u32 mfn = pll & 0x3ff; - u32 mfd = (pll >> 16) & 0x3ff; - u32 pd = (pll >> 26) & 0xf; - - mfi = mfi <= 5 ? 5 : mfi; - - ll = 2 * (unsigned long long)f_ref * - ((mfi << 16) + (mfn << 16) / (mfd + 1)); - quot = (pd + 1) * (1 << 16); - ll += quot / 2; - do_div(ll, quot); - return (unsigned long)ll; -} - -static unsigned long imx_get_system_clk(void) -{ - u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512); - - return imx_decode_pll(SPCTL0, f_ref); -} - -static unsigned long imx_get_mcu_clk(void) -{ - return imx_decode_pll(MPCTL0, CLK32 * 512); -} - -/* - * get peripheral clock 1 ( UART[12], Timer[12], PWM ) - */ -static unsigned long imx_get_perclk1(void) -{ - return imx_get_system_clk() / (((PCDR) & 0xf)+1); -} - -/* - * get peripheral clock 2 ( LCD, SD, SPI[12] ) - */ -static unsigned long imx_get_perclk2(void) -{ - return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1); -} - -/* - * get peripheral clock 3 ( SSI ) - */ -static unsigned long imx_get_perclk3(void) -{ - return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1); -} - -/* - * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA ) - */ -static unsigned long imx_get_hclk(void) -{ - return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1); -} - -static struct clk clk_system_clk = { - .name = "system_clk", - .get_rate = imx_get_system_clk, -}; - -static struct clk clk_hclk = { - .name = "hclk", - .get_rate = imx_get_hclk, -}; - -static struct clk clk_mcu_clk = { - .name = "mcu_clk", - .get_rate = imx_get_mcu_clk, -}; - -static struct clk clk_perclk1 = { - .name = "perclk1", - .get_rate = imx_get_perclk1, -}; - -static struct clk clk_uart_clk = { - .name = "uart_clk", - .get_rate = imx_get_perclk1, -}; - -static struct clk clk_perclk2 = { - .name = "perclk2", - .get_rate = imx_get_perclk2, -}; - -static struct clk clk_perclk3 = { - .name = "perclk3", - .get_rate = imx_get_perclk3, -}; - -static struct clk *clks[] = { - &clk_perclk1, - &clk_perclk2, - &clk_perclk3, - &clk_system_clk, - &clk_hclk, - &clk_mcu_clk, - &clk_uart_clk, -}; - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); - -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *p, *clk = ERR_PTR(-ENOENT); - - mutex_lock(&clocks_mutex); - list_for_each_entry(p, &clocks, node) { - if (!strcmp(p->name, id)) { - clk = p; - goto found; - } - } - -found: - mutex_unlock(&clocks_mutex); - - return clk; -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->get_rate(); -} -EXPORT_SYMBOL(clk_get_rate); - -int imx_clocks_init(void) -{ - int i; - - mutex_lock(&clocks_mutex); - for (i = 0; i < ARRAY_SIZE(clks); i++) - list_add(&clks[i]->node, &clocks); - mutex_unlock(&clocks_mutex); - - return 0; -} - diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/cpufreq.c linux-2.6.30-rc4-git/arch/arm/mach-imx/cpufreq.c --- linux-2.6.30-rc4/arch/arm/mach-imx/cpufreq.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/cpufreq.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,315 +0,0 @@ -/* - * cpu.c: clock scaling for the iMX - * - * Copyright (C) 2000 2001, The Delft University of Technology - * Copyright (c) 2004 Sascha Hauer - * Copyright (C) 2006 Inky Lung - * Copyright (C) 2006 Pavel Pisa, PiKRON - * - * Based on SA1100 version written by: - * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version - * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl): - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -/*#define DEBUG*/ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "generic.h" - -#ifndef __val2mfld -#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask)) -#endif -#ifndef __mfld2val -#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1))) -#endif - -#define CR_920T_CLOCK_MODE 0xC0000000 -#define CR_920T_FASTBUS_MODE 0x00000000 -#define CR_920T_ASYNC_MODE 0xC0000000 - -static u32 mpctl0_at_boot; -static u32 bclk_div_at_boot; - -static struct clk *system_clk, *mcu_clk; - -static void imx_set_async_mode(void) -{ - adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE); -} - -static void imx_set_fastbus_mode(void) -{ - adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE); -} - -static void imx_set_mpctl0(u32 mpctl0) -{ - unsigned long flags; - - if (mpctl0 == 0) { - local_irq_save(flags); - CSCR &= ~CSCR_MPEN; - local_irq_restore(flags); - return; - } - - local_irq_save(flags); - MPCTL0 = mpctl0; - CSCR |= CSCR_MPEN; - local_irq_restore(flags); -} - -/** - * imx_compute_mpctl - compute new PLL parameters - * @new_mpctl: pointer to location assigned by new PLL control register value - * @cur_mpctl: current PLL control register parameters - * @f_ref: reference source frequency Hz - * @freq: required frequency in Hz - * @relation: is one of %CPUFREQ_RELATION_L (supremum) - * and %CPUFREQ_RELATION_H (infimum) - */ -long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, u32 f_ref, unsigned long freq, int relation) -{ - u32 mfi; - u32 mfn; - u32 mfd; - u32 pd; - unsigned long long ll; - long l; - long quot; - - /* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */ - /* PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */ - - if (cur_mpctl) { - mfd = ((cur_mpctl >> 16) & 0x3ff) + 1; - pd = ((cur_mpctl >> 26) & 0xf) + 1; - } else { - pd=2; mfd=313; - } - - /* pd=2; mfd=313; mfi=8; mfn=183; */ - /* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */ - - quot = (f_ref + (1 << 9)) >> 10; - l = (freq * pd + quot) / (2 * quot); - mfi = l >> 10; - mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10; - - mfd -= 1; - pd -= 1; - - *new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16) - | ((pd & 0xf) << 26); - - ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) ); - quot = (pd+1) * (1<<16); - ll += quot / 2; - do_div(ll, quot); - freq = ll; - - pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n", - pd, mfd, mfi, mfn, freq); - - return freq; -} - - -static int imx_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - - return 0; -} - -static unsigned int imx_get_speed(unsigned int cpu) -{ - unsigned int freq; - unsigned int cr; - unsigned int cscr; - unsigned int bclk_div; - - if (cpu) - return 0; - - cscr = CSCR; - bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1; - cr = get_cr(); - - if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) { - freq = clk_get_rate(system_clk); - freq = (freq + bclk_div/2) / bclk_div; - } else { - freq = clk_get_rate(mcu_clk); - if (cscr & CSCR_MPU_PRESC) - freq /= 2; - } - - freq = (freq + 500) / 1000; - - return freq; -} - -static int imx_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_freqs freqs; - u32 mpctl0 = 0; - u32 cscr; - unsigned long flags; - long freq; - long sysclk; - unsigned int bclk_div = bclk_div_at_boot; - - /* - * Some governors do not respects CPU and policy lower limits - * which leads to bad things (division by zero etc), ensure - * that such things do not happen. - */ - if(target_freq < policy->cpuinfo.min_freq) - target_freq = policy->cpuinfo.min_freq; - - if(target_freq < policy->min) - target_freq = policy->min; - - freq = target_freq * 1000; - - pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n", - freq, mpctl0_at_boot); - - sysclk = clk_get_rate(system_clk); - - if (freq > sysclk / bclk_div_at_boot + 1000000) { - freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation); - if (freq < 0) { - printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq); - return -EINVAL; - } - } else { - if(freq + 1000 < sysclk) { - if (relation == CPUFREQ_RELATION_L) - bclk_div = (sysclk - 1000) / freq; - else - bclk_div = (sysclk + freq + 1000) / freq; - - if(bclk_div > 16) - bclk_div = 16; - if(bclk_div < bclk_div_at_boot) - bclk_div = bclk_div_at_boot; - } - freq = (sysclk + bclk_div / 2) / bclk_div; - } - - freqs.old = imx_get_speed(0); - freqs.new = (freq + 500) / 1000; - freqs.cpu = 0; - freqs.flags = 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - local_irq_save(flags); - - imx_set_fastbus_mode(); - - imx_set_mpctl0(mpctl0); - - cscr = CSCR; - cscr &= ~CSCR_BCLK_DIV; - cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1); - CSCR = cscr; - - if(mpctl0) { - CSCR |= CSCR_MPLL_RESTART; - - /* Wait until MPLL is stabilized */ - while( CSCR & CSCR_MPLL_RESTART ); - - imx_set_async_mode(); - } - - local_irq_restore(flags); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n", - freq, mpctl0? "MPLL": "SPLL"); - - return 0; -} - -static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy) -{ - printk(KERN_INFO "i.MX cpu freq change driver v1.0\n"); - - if (policy->cpu != 0) - return -EINVAL; - - policy->cur = policy->min = policy->max = imx_get_speed(0); - policy->cpuinfo.min_freq = 8000; - policy->cpuinfo.max_freq = 200000; - /* Manual states, that PLL stabilizes in two CLK32 periods */ - policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32; - return 0; -} - -static struct cpufreq_driver imx_driver = { - .flags = CPUFREQ_STICKY, - .verify = imx_verify_speed, - .target = imx_set_target, - .get = imx_get_speed, - .init = imx_cpufreq_driver_init, - .name = "imx", -}; - -static int __init imx_cpufreq_init(void) -{ - bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1; - mpctl0_at_boot = 0; - - system_clk = clk_get(NULL, "system_clk"); - if (IS_ERR(system_clk)) - return PTR_ERR(system_clk); - - mcu_clk = clk_get(NULL, "mcu_clk"); - if (IS_ERR(mcu_clk)) { - clk_put(system_clk); - return PTR_ERR(mcu_clk); - } - - if((CSCR & CSCR_MPEN) && - ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE)) - mpctl0_at_boot = MPCTL0; - - return cpufreq_register_driver(&imx_driver); -} - -arch_initcall(imx_cpufreq_init); - diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/dma.c linux-2.6.30-rc4-git/arch/arm/mach-imx/dma.c --- linux-2.6.30-rc4/arch/arm/mach-imx/dma.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/dma.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,597 +0,0 @@ -/* - * linux/arch/arm/mach-imx/dma.c - * - * imx DMA registration and IRQ dispatching - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * 2004-03-03 Sascha Hauer - * initial version heavily inspired by - * linux/arch/arm/mach-pxa/dma.c - * - * 2005-04-17 Pavel Pisa - * Changed to support scatter gather DMA - * by taking Russell's code from RiscPC - * - * 2006-05-31 Pavel Pisa - * Corrected error handling code. - * - */ - -#undef DEBUG - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; - -/* - * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation - * @dma_ch: i.MX DMA channel number - * @lastcount: number of bytes transferred during last transfer - * - * Functions prepares DMA controller for next sg data chunk transfer. - * The @lastcount argument informs function about number of bytes transferred - * during last block. Zero value can be used for @lastcount to setup DMA - * for the first chunk. - */ -static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned int nextcount; - unsigned int nextaddr; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, dma_ch); - return 0; - } - - imxdma->resbytes -= lastcount; - - if (!imxdma->sg) { - pr_debug("imxdma%d: no sg data\n", dma_ch); - return 0; - } - - imxdma->sgbc += lastcount; - if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) { - if ((imxdma->sgcount <= 1) || !imxdma->resbytes) { - pr_debug("imxdma%d: sg transfer limit reached\n", - dma_ch); - imxdma->sgcount=0; - imxdma->sg = NULL; - return 0; - } else { - imxdma->sgcount--; - imxdma->sg++; - imxdma->sgbc = 0; - } - } - nextcount = imxdma->sg->length - imxdma->sgbc; - nextaddr = imxdma->sg->dma_address + imxdma->sgbc; - - if(imxdma->resbytes < nextcount) - nextcount = imxdma->resbytes; - - if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ) - DAR(dma_ch) = nextaddr; - else - SAR(dma_ch) = nextaddr; - - CNTR(dma_ch) = nextcount; - pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n", - dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch)); - - return nextcount; -} - -/* - * imx_dma_setup_sg_base - scatter-gather DMA emulation - * @dma_ch: i.MX DMA channel number - * @sg: pointer to the scatter-gather list/vector - * @sgcount: scatter-gather list hungs count - * - * Functions sets up i.MX DMA state for emulated scatter-gather transfer - * and sets up channel registers to be ready for the first chunk - */ -static int -imx_dma_setup_sg_base(imx_dmach_t dma_ch, - struct scatterlist *sg, unsigned int sgcount) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - imxdma->sg = sg; - imxdma->sgcount = sgcount; - imxdma->sgbc = 0; - return imx_dma_sg_next(dma_ch, 0); -} - -/** - * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer - * @dma_ch: i.MX DMA channel number - * @dma_address: the DMA/physical memory address of the linear data block - * to transfer - * @dma_length: length of the data block in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * The function setups DMA channel source and destination addresses for transfer - * specified by provided parameters. The scatter-gather emulation is disabled, - * because linear data block - * form the physical address range is transferred. - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - imxdma->sg = NULL; - imxdma->sgcount = 0; - imxdma->dma_mode = dmamode; - imxdma->resbytes = dma_length; - - if (!dma_address) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n", - dma_ch); - return -EINVAL; - } - - if (!dma_length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n", - dma_ch); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n", - dma_ch, (unsigned int)dma_address, dma_length, - dev_addr); - SAR(dma_ch) = dev_addr; - DAR(dma_ch) = (unsigned int)dma_address; - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n", - dma_ch, (unsigned int)dma_address, dma_length, - dev_addr); - SAR(dma_ch) = (unsigned int)dma_address; - DAR(dma_ch) = dev_addr; - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n", - dma_ch); - return -EINVAL; - } - - CNTR(dma_ch) = dma_length; - - return 0; -} - -/** - * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer - * @dma_ch: i.MX DMA channel number - * @sg: pointer to the scatter-gather list/vector - * @sgcount: scatter-gather list hungs count - * @dma_length: total length of the transfer request in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * The function sets up DMA channel state and registers to be ready for transfer - * specified by provided parameters. The scatter-gather emulation is set up - * according to the parameters. - * - * The full preparation of the transfer requires setup of more register - * by the caller before imx_dma_enable() can be called. - * - * %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes - * - * %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx - * - * %CCR(dma_ch) has to specify transfer parameters, the next settings is typical - * for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified - * - * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x - * - * The typical setup for %DMA_MODE_WRITE is specified by next options combination - * - * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x - * - * Be careful here and do not mistakenly mix source and target device - * port sizes constants, they are really different: - * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32, - * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32 - * - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_sg(imx_dmach_t dma_ch, - struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length, - unsigned int dev_addr, unsigned int dmamode) -{ - int res; - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - imxdma->sg = NULL; - imxdma->sgcount = 0; - imxdma->dma_mode = dmamode; - imxdma->resbytes = dma_length; - - if (!sg || !sgcount) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n", - dma_ch); - return -EINVAL; - } - - if (!sg->length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n", - dma_ch); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n", - dma_ch, sg, sgcount, dma_length, dev_addr); - SAR(dma_ch) = dev_addr; - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n", - dma_ch, sg, sgcount, dma_length, dev_addr); - DAR(dma_ch) = dev_addr; - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n", - dma_ch); - return -EINVAL; - } - - res = imx_dma_setup_sg_base(dma_ch, sg, sgcount); - if (res <= 0) { - printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch); - return -EINVAL; - } - - return 0; -} - -/** - * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers - * @dma_ch: i.MX DMA channel number - * @irq_handler: the pointer to the function called if the transfer - * ends successfully - * @err_handler: the pointer to the function called if the premature - * end caused by error occurs - * @data: user specified value to be passed to the handlers - */ -int -imx_dma_setup_handlers(imx_dmach_t dma_ch, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), - void *data) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned long flags; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, dma_ch); - return -ENODEV; - } - - local_irq_save(flags); - DISR = (1 << dma_ch); - imxdma->irq_handler = irq_handler; - imxdma->err_handler = err_handler; - imxdma->data = data; - local_irq_restore(flags); - return 0; -} - -/** - * imx_dma_enable - function to start i.MX DMA channel operation - * @dma_ch: i.MX DMA channel number - * - * The channel has to be allocated by driver through imx_dma_request() - * or imx_dma_request_by_prio() function. - * The transfer parameters has to be set to the channel registers through - * call of the imx_dma_setup_single() or imx_dma_setup_sg() function - * and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to - * be set prior this function call by the channel user. - */ -void imx_dma_enable(imx_dmach_t dma_ch) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_enable\n", dma_ch); - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, dma_ch); - return; - } - - local_irq_save(flags); - DISR = (1 << dma_ch); - DIMR &= ~(1 << dma_ch); - CCR(dma_ch) |= CCR_CEN; - local_irq_restore(flags); -} - -/** - * imx_dma_disable - stop, finish i.MX DMA channel operatin - * @dma_ch: i.MX DMA channel number - */ -void imx_dma_disable(imx_dmach_t dma_ch) -{ - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_disable\n", dma_ch); - - local_irq_save(flags); - DIMR |= (1 << dma_ch); - CCR(dma_ch) &= ~CCR_CEN; - DISR = (1 << dma_ch); - local_irq_restore(flags); -} - -/** - * imx_dma_request - request/allocate specified channel number - * @dma_ch: i.MX DMA channel number - * @name: the driver/caller own non-%NULL identification - */ -int imx_dma_request(imx_dmach_t dma_ch, const char *name) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned long flags; - - /* basic sanity checks */ - if (!name) - return -EINVAL; - - if (dma_ch >= IMX_DMA_CHANNELS) { - printk(KERN_CRIT "%s: called for non-existed channel %d\n", - __func__, dma_ch); - return -EINVAL; - } - - local_irq_save(flags); - if (imxdma->name) { - local_irq_restore(flags); - return -ENODEV; - } - - imxdma->name = name; - imxdma->irq_handler = NULL; - imxdma->err_handler = NULL; - imxdma->data = NULL; - imxdma->sg = NULL; - local_irq_restore(flags); - return 0; -} - -/** - * imx_dma_free - release previously acquired channel - * @dma_ch: i.MX DMA channel number - */ -void imx_dma_free(imx_dmach_t dma_ch) -{ - unsigned long flags; - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - if (!imxdma->name) { - printk(KERN_CRIT - "%s: trying to free channel %d which is already freed\n", - __func__, dma_ch); - return; - } - - local_irq_save(flags); - /* Disable interrupts */ - DIMR |= (1 << dma_ch); - CCR(dma_ch) &= ~CCR_CEN; - imxdma->name = NULL; - local_irq_restore(flags); -} - -/** - * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority - * @name: the driver/caller own non-%NULL identification - * @prio: one of the hardware distinguished priority level: - * %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW - * - * This function tries to find free channel in the specified priority group - * if the priority cannot be achieved it tries to look for free channel - * in the higher and then even lower priority groups. - * - * Return value: If there is no free channel to allocate, -%ENODEV is returned. - * On successful allocation channel is returned. - */ -imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio) -{ - int i; - int best; - - switch (prio) { - case (DMA_PRIO_HIGH): - best = 8; - break; - case (DMA_PRIO_MEDIUM): - best = 4; - break; - case (DMA_PRIO_LOW): - default: - best = 0; - break; - } - - for (i = best; i < IMX_DMA_CHANNELS; i++) { - if (!imx_dma_request(i, name)) { - return i; - } - } - - for (i = best - 1; i >= 0; i--) { - if (!imx_dma_request(i, name)) { - return i; - } - } - - printk(KERN_ERR "%s: no free DMA channel found\n", __func__); - - return -ENODEV; -} - -static irqreturn_t dma_err_handler(int irq, void *dev_id) -{ - int i, disr = DISR; - struct imx_dma_channel *channel; - unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR; - int errcode; - - DISR = disr & err_mask; - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if(!(err_mask & (1 << i))) - continue; - channel = &imx_dma_channels[i]; - errcode = 0; - - if (DBTOSR & (1 << i)) { - DBTOSR = (1 << i); - errcode |= IMX_DMA_ERR_BURST; - } - if (DRTOSR & (1 << i)) { - DRTOSR = (1 << i); - errcode |= IMX_DMA_ERR_REQUEST; - } - if (DSESR & (1 << i)) { - DSESR = (1 << i); - errcode |= IMX_DMA_ERR_TRANSFER; - } - if (DBOSR & (1 << i)) { - DBOSR = (1 << i); - errcode |= IMX_DMA_ERR_BUFFER; - } - - /* - * The cleaning of @sg field would be questionable - * there, because its value can help to compute - * remaining/transferred bytes count in the handler - */ - /*imx_dma_channels[i].sg = NULL;*/ - - if (channel->name && channel->err_handler) { - channel->err_handler(i, channel->data, errcode); - continue; - } - - imx_dma_channels[i].sg = NULL; - - printk(KERN_WARNING - "DMA timeout on channel %d (%s) -%s%s%s%s\n", - i, channel->name, - errcode&IMX_DMA_ERR_BURST? " burst":"", - errcode&IMX_DMA_ERR_REQUEST? " request":"", - errcode&IMX_DMA_ERR_TRANSFER? " transfer":"", - errcode&IMX_DMA_ERR_BUFFER? " buffer":""); - } - return IRQ_HANDLED; -} - -static irqreturn_t dma_irq_handler(int irq, void *dev_id) -{ - int i, disr = DISR; - - pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n", - disr); - - DISR = disr; - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if (disr & (1 << i)) { - struct imx_dma_channel *channel = &imx_dma_channels[i]; - if (channel->name) { - if (imx_dma_sg_next(i, CNTR(i))) { - CCR(i) &= ~CCR_CEN; - mb(); - CCR(i) |= CCR_CEN; - } else { - if (channel->irq_handler) - channel->irq_handler(i, - channel->data); - } - } else { - /* - * IRQ for an unregistered DMA channel: - * let's clear the interrupts and disable it. - */ - printk(KERN_WARNING - "spurious IRQ for DMA channel %d\n", i); - } - } - } - return IRQ_HANDLED; -} - -static int __init imx_dma_init(void) -{ - int ret; - int i; - - /* reset DMA module */ - DCR = DCR_DRST; - - ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n"); - return ret; - } - - ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register ERRIRQ for DMA\n"); - free_irq(DMA_INT, NULL); - } - - /* enable DMA module */ - DCR = DCR_DEN; - - /* clear all interrupts */ - DISR = (1 << IMX_DMA_CHANNELS) - 1; - - /* enable interrupts */ - DIMR = (1 << IMX_DMA_CHANNELS) - 1; - - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - imx_dma_channels[i].sg = NULL; - imx_dma_channels[i].dma_num = i; - } - - return ret; -} - -arch_initcall(imx_dma_init); - -EXPORT_SYMBOL(imx_dma_setup_single); -EXPORT_SYMBOL(imx_dma_setup_sg); -EXPORT_SYMBOL(imx_dma_setup_handlers); -EXPORT_SYMBOL(imx_dma_enable); -EXPORT_SYMBOL(imx_dma_disable); -EXPORT_SYMBOL(imx_dma_request); -EXPORT_SYMBOL(imx_dma_free); -EXPORT_SYMBOL(imx_dma_request_by_prio); -EXPORT_SYMBOL(imx_dma_channels); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/generic.c linux-2.6.30-rc4-git/arch/arm/mach-imx/generic.c --- linux-2.6.30-rc4/arch/arm/mach-imx/generic.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/generic.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,271 +0,0 @@ -/* - * arch/arm/mach-imx/generic.c - * - * author: Sascha Hauer - * Created: april 20th, 2004 - * Copyright: Synertronixx GmbH - * - * Common code for i.MX machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG]; - -void imx_gpio_mode(int gpio_mode) -{ - unsigned int pin = gpio_mode & GPIO_PIN_MASK; - unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; - unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; - unsigned int tmp; - - /* Pullup enable */ - if(gpio_mode & GPIO_PUEN) - PUEN(port) |= (1<> GPIO_AOUT_SHIFT) & 3) << (pin * 2); - ICONFB1(port) &= ~( 3<<(pin*2)); - ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); - } else { - tmp = OCR2(port); - tmp &= ~( 3<<((pin-16)*2)); - tmp |= (ocr << ((pin-16)*2)); - OCR2(port) = tmp; - - ICONFA2(port) &= ~( 3<<((pin-16)*2)); - ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2); - ICONFB2(port) &= ~( 3<<((pin-16)*2)); - ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2); - } -} - -EXPORT_SYMBOL(imx_gpio_mode); - -int imx_gpio_request(unsigned gpio, const char *label) -{ - if(gpio >= (GPIO_PORT_MAX + 1) * 32) { - printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n", - gpio, label ? label : "?"); - return -EINVAL; - } - - if(test_and_set_bit(gpio, imx_gpio_alloc_map)) { - printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n", - gpio, label ? label : "?"); - return -EBUSY; - } - - return 0; -} - -EXPORT_SYMBOL(imx_gpio_request); - -void imx_gpio_free(unsigned gpio) -{ - if(gpio >= (GPIO_PORT_MAX + 1) * 32) - return; - - clear_bit(gpio, imx_gpio_alloc_map); -} - -EXPORT_SYMBOL(imx_gpio_free); - -int imx_gpio_direction_input(unsigned gpio) -{ - imx_gpio_mode(gpio | GPIO_IN | GPIO_GIUS | GPIO_DR); - return 0; -} - -EXPORT_SYMBOL(imx_gpio_direction_input); - -int imx_gpio_direction_output(unsigned gpio, int value) -{ - imx_gpio_set_value(gpio, value); - imx_gpio_mode(gpio | GPIO_OUT | GPIO_GIUS | GPIO_DR); - return 0; -} - -EXPORT_SYMBOL(imx_gpio_direction_output); - -int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - int alloc_mode, const char *label) -{ - const int *p = pin_list; - int i; - unsigned gpio; - unsigned mode; - - for (i = 0; i < count; i++) { - gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK); - - if (gpio >= (GPIO_PORT_MAX + 1) * 32) - goto setup_error; - - if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE) - imx_gpio_free(gpio); - else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC)) - if (imx_gpio_request(gpio, label)) - if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC)) - goto setup_error; - - if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY | - IMX_GPIO_ALLOC_MODE_RELEASE))) - imx_gpio_mode(gpio | mode); - - p++; - } - return 0; - -setup_error: - if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC | - IMX_GPIO_ALLOC_MODE_TRY_ALLOC)) - return -EINVAL; - - while (p != pin_list) { - p--; - gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - imx_gpio_free(gpio); - } - - return -EINVAL; -} - -EXPORT_SYMBOL(imx_gpio_setup_multiple_pins); - -void __imx_gpio_set_value(unsigned gpio, int value) -{ - imx_gpio_set_value_inline(gpio, value); -} - -EXPORT_SYMBOL(__imx_gpio_set_value); - -int imx_gpio_to_irq(unsigned gpio) -{ - return IRQ_GPIOA(0) + gpio; -} - -EXPORT_SYMBOL(imx_gpio_to_irq); - -int imx_irq_to_gpio(unsigned irq) -{ - if (irq < IRQ_GPIOA(0)) - return -EINVAL; - return irq - IRQ_GPIOA(0); -} - -EXPORT_SYMBOL(imx_irq_to_gpio); - -static struct resource imx_mmc_resources[] = { - [0] = { - .start = 0x00214000, - .end = 0x002140FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (SDHC_INT), - .end = (SDHC_INT), - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 imxmmmc_dmamask = 0xffffffffUL; - -static struct platform_device imx_mmc_device = { - .name = "imx-mmc", - .id = 0, - .dev = { - .dma_mask = &imxmmmc_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(imx_mmc_resources), - .resource = imx_mmc_resources, -}; - -void __init imx_set_mmc_info(struct imxmmc_platform_data *info) -{ - imx_mmc_device.dev.platform_data = info; -} - -static struct platform_device *devices[] __initdata = { - &imx_mmc_device, -}; - -static struct map_desc imx_io_desc[] __initdata = { - { - .virtual = IMX_IO_BASE, - .pfn = __phys_to_pfn(IMX_IO_PHYS), - .length = IMX_IO_SIZE, - .type = MT_DEVICE - } -}; - -void __init -imx_map_io(void) -{ - iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); -} - -static int __init imx_init(void) -{ - return platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -subsys_initcall(imx_init); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/generic.h linux-2.6.30-rc4-git/arch/arm/mach-imx/generic.h --- linux-2.6.30-rc4/arch/arm/mach-imx/generic.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/generic.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,16 +0,0 @@ -/* - * linux/arch/arm/mach-imx/generic.h - * - * Author: Sascha Hauer - * Copyright: Synertronixx GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -extern void __init imx_map_io(void); -extern void __init imx_init_irq(void); - -struct sys_timer; -extern struct sys_timer imx_timer; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/debug-macro.S linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/debug-macro.S --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/debug-macro.S 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/debug-macro.S 1970-01-01 01:00:00.000000000 +0100 @@ -1,34 +0,0 @@ -/* arch/arm/mach-imx/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x00000000 @ physical - movne \rx, #0xe0000000 @ virtual - orreq \rx, \rx, #0x00200000 @ physical - orr \rx, \rx, #0x00006000 @ UART1 offset - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x40] @ TXDATA - .endm - - .macro waituart,rd,rx - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x98] @ SR2 - tst \rd, #1 << 3 @ TXDC - beq 1002b @ wait until transmit done - .endm diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/dma.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/dma.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/dma.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/dma.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,56 +0,0 @@ -/* - * linux/include/asm-arm/imxads/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -typedef enum { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -} imx_dma_prio; - -#define DMA_REQ_UART3_T 2 -#define DMA_REQ_UART3_R 3 -#define DMA_REQ_SSI2_T 4 -#define DMA_REQ_SSI2_R 5 -#define DMA_REQ_CSI_STAT 6 -#define DMA_REQ_CSI_R 7 -#define DMA_REQ_MSHC 8 -#define DMA_REQ_DSPA_DCT_DOUT 9 -#define DMA_REQ_DSPA_DCT_DIN 10 -#define DMA_REQ_DSPA_MAC 11 -#define DMA_REQ_EXT 12 -#define DMA_REQ_SDHC 13 -#define DMA_REQ_SPI1_R 14 -#define DMA_REQ_SPI1_T 15 -#define DMA_REQ_SSI_T 16 -#define DMA_REQ_SSI_R 17 -#define DMA_REQ_ASP_DAC 18 -#define DMA_REQ_ASP_ADC 19 -#define DMA_REQ_USP_EP(x) (20+(x)) -#define DMA_REQ_SPI2_R 26 -#define DMA_REQ_SPI2_T 27 -#define DMA_REQ_UART2_T 28 -#define DMA_REQ_UART2_R 29 -#define DMA_REQ_UART1_T 30 -#define DMA_REQ_UART1_R 31 - -#endif /* _ASM_ARCH_DMA_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/entry-macro.S linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/entry-macro.S --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/entry-macro.S 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/entry-macro.S 1970-01-01 01:00:00.000000000 +0100 @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for iMX-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - -#define AITC_NIVECSR 0x40 - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =IO_ADDRESS(IMX_AITC_BASE) - @ Load offset & priority of the highest priority - @ interrupt pending. - ldr \irqstat, [\base, #AITC_NIVECSR] - @ Shift off the priority leaving the offset or - @ "interrupt number", use arithmetic shift to - @ transform illegal source (0xffff) as -1 - mov \irqnr, \irqstat, asr #16 - adds \tmp, \irqnr, #1 - .endm diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/gpio.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/gpio.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/gpio.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/gpio.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,106 +0,0 @@ -#ifndef _IMX_GPIO_H - -#include -#include -#include - -#define IMX_GPIO_ALLOC_MODE_NORMAL 0 -#define IMX_GPIO_ALLOC_MODE_NO_ALLOC 1 -#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC 2 -#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY 4 -#define IMX_GPIO_ALLOC_MODE_RELEASE 8 - -extern int imx_gpio_request(unsigned gpio, const char *label); - -extern void imx_gpio_free(unsigned gpio); - -extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - int alloc_mode, const char *label); - -extern int imx_gpio_direction_input(unsigned gpio); - -extern int imx_gpio_direction_output(unsigned gpio, int value); - -extern void __imx_gpio_set_value(unsigned gpio, int value); - -static inline int imx_gpio_get_value(unsigned gpio) -{ - return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK)); -} - -static inline void imx_gpio_set_value_inline(unsigned gpio, int value) -{ - unsigned long flags; - - raw_local_irq_save(flags); - if(value) - DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK)); - else - DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK)); - raw_local_irq_restore(flags); -} - -static inline void imx_gpio_set_value(unsigned gpio, int value) -{ - if(__builtin_constant_p(gpio)) - imx_gpio_set_value_inline(gpio, value); - else - __imx_gpio_set_value(gpio, value); -} - -extern int imx_gpio_to_irq(unsigned gpio); - -extern int imx_irq_to_gpio(unsigned irq); - -/*-------------------------------------------------------------------------*/ - -/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions - * to allow future extension of GPIO logic. - */ - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return imx_gpio_request(gpio, label); -} - -static inline void gpio_free(unsigned gpio) -{ - might_sleep(); - - imx_gpio_free(gpio); -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return imx_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return imx_gpio_direction_output(gpio, value); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return imx_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - imx_gpio_set_value(gpio, value); -} - -#include /* cansleep wrappers */ - -static inline int gpio_to_irq(unsigned gpio) -{ - return imx_gpio_to_irq(gpio); -} - -static inline int irq_to_gpio(unsigned irq) -{ - return imx_irq_to_gpio(irq); -} - - -#endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/hardware.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/hardware.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/hardware.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/hardware.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,91 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/hardware.h - * - * Copyright (C) 1999 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include "imx-regs.h" - -#ifndef __ASSEMBLY__ -# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x))) - -# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) -#endif - -/* - * Memory map - */ - -#define IMX_IO_PHYS 0x00200000 -#define IMX_IO_SIZE 0x00100000 -#define IMX_IO_BASE 0xe0000000 - -#define IMX_CS0_PHYS 0x10000000 -#define IMX_CS0_SIZE 0x02000000 -#define IMX_CS0_VIRT 0xe8000000 - -#define IMX_CS1_PHYS 0x12000000 -#define IMX_CS1_SIZE 0x01000000 -#define IMX_CS1_VIRT 0xea000000 - -#define IMX_CS2_PHYS 0x13000000 -#define IMX_CS2_SIZE 0x01000000 -#define IMX_CS2_VIRT 0xeb000000 - -#define IMX_CS3_PHYS 0x14000000 -#define IMX_CS3_SIZE 0x01000000 -#define IMX_CS3_VIRT 0xec000000 - -#define IMX_CS4_PHYS 0x15000000 -#define IMX_CS4_SIZE 0x01000000 -#define IMX_CS4_VIRT 0xed000000 - -#define IMX_CS5_PHYS 0x16000000 -#define IMX_CS5_SIZE 0x01000000 -#define IMX_CS5_VIRT 0xee000000 - -#define IMX_FB_VIRT 0xF1000000 -#define IMX_FB_SIZE (256*1024) - -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((x) | IMX_IO_BASE) - -#ifndef __ASSEMBLY__ -/* - * Handy routine to set GPIO functions - */ -extern void imx_gpio_mode( int gpio_mode ); - -#endif - -#define MAXIRQNUM 62 -#define MAXFIQNUM 62 -#define MAXSWINUM 62 - -/* - * Use SDRAM for memory - */ -#define MEM_SIZE 0x01000000 - -#ifdef CONFIG_ARCH_MX1ADS -#include "mx1ads.h" -#endif - -#endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/imx-dma.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/imx-dma.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/imx-dma.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/imx-dma.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,98 +0,0 @@ -/* - * linux/include/asm-arm/imxads/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include - -#ifndef __ASM_ARCH_IMX_DMA_H -#define __ASM_ARCH_IMX_DMA_H - -#define IMX_DMA_CHANNELS 11 - -/* - * struct imx_dma_channel - i.MX specific DMA extension - * @name: name specified by DMA client - * @irq_handler: client callback for end of transfer - * @err_handler: client callback for error condition - * @data: clients context data for callbacks - * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE - * @sg: pointer to the actual read/written chunk for scatter-gather emulation - * @sgbc: counter of processed bytes in the actual read/written chunk - * @resbytes: total residual number of bytes to transfer - * (it can be lower or same as sum of SG mapped chunk sizes) - * @sgcount: number of chunks to be read/written - * - * Structure is used for IMX DMA processing. It would be probably good - * @struct dma_struct in the future for external interfacing and use - * @struct imx_dma_channel only as extension to it. - */ - -struct imx_dma_channel { - const char *name; - void (*irq_handler) (int, void *); - void (*err_handler) (int, void *, int errcode); - void *data; - unsigned int dma_mode; - struct scatterlist *sg; - unsigned int sgbc; - unsigned int sgcount; - unsigned int resbytes; - int dma_num; -}; - -extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; - -#define IMX_DMA_ERR_BURST 1 -#define IMX_DMA_ERR_REQUEST 2 -#define IMX_DMA_ERR_TRANSFER 4 -#define IMX_DMA_ERR_BUFFER 8 - -/* The type to distinguish channel numbers parameter from ordinal int type */ -typedef int imx_dmach_t; - -#define DMA_MODE_READ 0 -#define DMA_MODE_WRITE 1 -#define DMA_MODE_MASK 1 - -int -imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode); - -int -imx_dma_setup_sg(imx_dmach_t dma_ch, - struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length, - unsigned int dev_addr, unsigned int dmamode); - -int -imx_dma_setup_handlers(imx_dmach_t dma_ch, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), void *data); - -void imx_dma_enable(imx_dmach_t dma_ch); - -void imx_dma_disable(imx_dmach_t dma_ch); - -int imx_dma_request(imx_dmach_t dma_ch, const char *name); - -void imx_dma_free(imx_dmach_t dma_ch); - -imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio); - - -#endif /* _ASM_ARCH_IMX_DMA_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/imx-regs.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/imx-regs.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/imx-regs.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/imx-regs.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,376 +0,0 @@ -#ifndef _IMX_REGS_H -#define _IMX_REGS_H -/* ------------------------------------------------------------------------ - * Motorola IMX system registers - * ------------------------------------------------------------------------ - * - */ - -/* - * Register BASEs, based on OFFSETs - * - */ -#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE) -#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE) -#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE) -#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE) -#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE) -#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE) -#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE) -#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE) -#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE) -#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE) -#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE) -#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE) -#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE) -#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE) -#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE) -#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE) -#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE) -#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE) -#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE) -#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE) -#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE) -#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE) -#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE) -#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE) -#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE) -#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE) -#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE) -#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE) - -/* PLL registers */ -#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */ -#define CSCR_SPLL_RESTART (1<<22) -#define CSCR_MPLL_RESTART (1<<21) -#define CSCR_SYSTEM_SEL (1<<16) -#define CSCR_BCLK_DIV (0xf<<10) -#define CSCR_MPU_PRESC (1<<15) -#define CSCR_SPEN (1<<1) -#define CSCR_MPEN (1<<0) - -#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */ -#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */ -#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */ -#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */ -#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */ - -/* - * GPIO Module and I/O Multiplexer - * x = 0..3 for reg_A, reg_B, reg_C, reg_D - */ -#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8) -#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8) -#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8) -#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8) -#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8) -#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8) -#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8) -#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8) -#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8) -#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8) -#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8) -#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8) -#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8) -#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8) -#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8) -#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8) -#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8) - -#define GPIO_PORT_MAX 3 - -#define GPIO_PIN_MASK 0x1f -#define GPIO_PORT_MASK (0x3 << 5) - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORTA (0<<5) -#define GPIO_PORTB (1<<5) -#define GPIO_PORTC (2<<5) -#define GPIO_PORTD (3<<5) - -#define GPIO_OUT (1<<7) -#define GPIO_IN (0<<7) -#define GPIO_PUEN (1<<8) - -#define GPIO_PF (0<<9) -#define GPIO_AF (1<<9) - -#define GPIO_OCR_SHIFT 10 -#define GPIO_OCR_MASK (3<<10) -#define GPIO_AIN (0<<10) -#define GPIO_BIN (1<<10) -#define GPIO_CIN (2<<10) -#define GPIO_DR (3<<10) - -#define GPIO_AOUT_SHIFT 12 -#define GPIO_AOUT_MASK (3<<12) -#define GPIO_AOUT (0<<12) -#define GPIO_AOUT_ISR (1<<12) -#define GPIO_AOUT_0 (2<<12) -#define GPIO_AOUT_1 (3<<12) - -#define GPIO_BOUT_SHIFT 14 -#define GPIO_BOUT_MASK (3<<14) -#define GPIO_BOUT (0<<14) -#define GPIO_BOUT_ISR (1<<14) -#define GPIO_BOUT_0 (2<<14) -#define GPIO_BOUT_1 (3<<14) - -#define GPIO_GIUS (1<<16) - -/* assignements for GPIO alternate/primary functions */ - -/* FIXME: This list is not completed. The correct directions are - * missing on some (many) pins - */ -#define PA0_AIN_SPI2_CLK ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 ) -#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 ) -#define PA1_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 ) -#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 ) -#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 ) -#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 ) -#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 ) -#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 ) -#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 ) -#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 ) -#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 ) -#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 ) -#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 ) -#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 ) -#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 ) -#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 ) -#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 ) -#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 ) -#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 ) -#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 ) -#define PA17_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 ) -#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 ) -#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 ) -#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 ) -#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 ) -#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 ) -#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 ) -#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 ) -#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 ) -#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 ) -#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 ) -#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 ) -#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 ) -#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 ) -#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 ) -#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 ) -#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 ) -#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 ) -#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 ) -#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 ) -#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 ) -#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 ) -#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 ) -#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 ) -#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 ) -#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 ) -#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 ) -#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 ) -#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 ) -#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 ) -#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 ) -#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 ) -#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 ) -#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 ) -#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 ) -#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 ) -#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 ) -#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 ) -#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 ) -#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 ) -#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 ) -#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 ) -#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 ) -#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 ) -#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 ) -#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 ) -#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 ) -#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 ) -#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 ) -#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 ) -#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 ) -#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 ) -#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 ) -#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 ) -#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 ) -#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 ) -#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 ) -#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 ) -#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 ) -#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 ) -#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 ) -#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 ) -#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 ) -#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 ) -#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 ) -#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 ) -#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 ) -#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 ) -#define PC24_BIN_UART3_RI ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 ) -#define PC25_BIN_UART3_DSR ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 ) -#define PC26_AOUT_UART3_DTR ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 ) -#define PC27_BIN_UART3_DCD ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 ) -#define PC28_BIN_UART3_CTS ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 ) -#define PC29_AOUT_UART3_RTS ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 ) -#define PC30_BIN_UART3_TX ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 ) -#define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31) -#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 ) -#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 ) -#define PD7_AF_UART2_DTR ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 ) -#define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 ) -#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 ) -#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 ) -#define PD8_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 ) -#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 ) -#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 ) -#define PD9_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 ) -#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 ) -#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 ) -#define PD10_AIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 ) -#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 ) -#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 ) -#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 ) -#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 ) -#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 ) -#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 ) -#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 ) -#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 ) -#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 ) -#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 ) -#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 ) -#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 ) -#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 ) -#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 ) -#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 ) -#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 ) -#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 ) -#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 ) -#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 ) -#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 ) -#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 ) -#define PD31_BIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 ) - -/* - * PWM controller - */ -#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */ -#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */ -#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */ -#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */ - -#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */ -#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */ -#define PWMC_SWR (0x01<<16) /* Software Reset */ -#define PWMC_CLKSRC (0x01<<15) /* Clock Source */ -#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */ -#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */ -#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */ -#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */ -#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */ -#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */ -#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */ - -#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */ -#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */ -#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */ - -/* - * DMA Controller - */ -#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */ -#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */ -#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */ -#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */ -#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */ -#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */ -#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */ -#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */ -#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */ -#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */ -#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */ -#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */ -#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */ -#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */ -#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */ -#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */ -#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */ -#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */ -#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */ -#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */ -#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */ -#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */ - -#define DCR_DRST (1<<1) -#define DCR_DEN (1<<0) -#define DBTOCR_EN (1<<15) -#define DBTOCR_CNT(x) ((x) & 0x7fff ) -#define CNTR_CNT(x) ((x) & 0xffffff ) -#define CCR_DMOD_LINEAR ( 0x0 << 12 ) -#define CCR_DMOD_2D ( 0x1 << 12 ) -#define CCR_DMOD_FIFO ( 0x2 << 12 ) -#define CCR_DMOD_EOBFIFO ( 0x3 << 12 ) -#define CCR_SMOD_LINEAR ( 0x0 << 10 ) -#define CCR_SMOD_2D ( 0x1 << 10 ) -#define CCR_SMOD_FIFO ( 0x2 << 10 ) -#define CCR_SMOD_EOBFIFO ( 0x3 << 10 ) -#define CCR_MDIR_DEC (1<<9) -#define CCR_MSEL_B (1<<8) -#define CCR_DSIZ_32 ( 0x0 << 6 ) -#define CCR_DSIZ_8 ( 0x1 << 6 ) -#define CCR_DSIZ_16 ( 0x2 << 6 ) -#define CCR_SSIZ_32 ( 0x0 << 4 ) -#define CCR_SSIZ_8 ( 0x1 << 4 ) -#define CCR_SSIZ_16 ( 0x2 << 4 ) -#define CCR_REN (1<<3) -#define CCR_RPT (1<<2) -#define CCR_FRC (1<<1) -#define CCR_CEN (1<<0) -#define RTOR_EN (1<<15) -#define RTOR_CLK (1<<14) -#define RTOR_PSC (1<<13) - -/* - * Interrupt controller - */ - -#define IMX_INTCNTL __REG(IMX_AITC_BASE+0x00) -#define INTCNTL_FIAD (1<<19) -#define INTCNTL_NIAD (1<<20) - -#define IMX_NIMASK __REG(IMX_AITC_BASE+0x04) -#define IMX_INTENNUM __REG(IMX_AITC_BASE+0x08) -#define IMX_INTDISNUM __REG(IMX_AITC_BASE+0x0c) -#define IMX_INTENABLEH __REG(IMX_AITC_BASE+0x10) -#define IMX_INTENABLEL __REG(IMX_AITC_BASE+0x14) - -/* - * General purpose timers - */ -#define IMX_TCTL(x) __REG( 0x00 + (x)) -#define TCTL_SWR (1<<15) -#define TCTL_FRR (1<<8) -#define TCTL_CAP_RIS (1<<6) -#define TCTL_CAP_FAL (2<<6) -#define TCTL_CAP_RIS_FAL (3<<6) -#define TCTL_OM (1<<5) -#define TCTL_IRQEN (1<<4) -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_16 (2<<1) -#define TCTL_CLK_TIN (3<<1) -#define TCTL_CLK_32 (4<<1) -#define TCTL_TEN (1<<0) - -#define IMX_TPRER(x) __REG( 0x04 + (x)) -#define IMX_TCMP(x) __REG( 0x08 + (x)) -#define IMX_TCR(x) __REG( 0x0C + (x)) -#define IMX_TCN(x) __REG( 0x10 + (x)) -#define IMX_TSTAT(x) __REG( 0x14 + (x)) -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -#endif // _IMX_REGS_H diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/imx-uart.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/imx-uart.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/imx-uart.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/imx-uart.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,12 +0,0 @@ -#ifndef ASMARM_ARCH_UART_H -#define ASMARM_ARCH_UART_H - -#define IMXUART_HAVE_RTSCTS (1<<0) - -struct imxuart_platform_data { - int (*init)(struct platform_device *pdev); - void (*exit)(struct platform_device *pdev); - unsigned int flags; -}; - -#endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/io.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/io.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/io.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/io.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-imxads/include/mach/io.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/irqs.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/irqs.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/irqs.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/irqs.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,121 +0,0 @@ -/* - * arch/arm/mach-imxads/include/mach/irqs.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ARM_IRQS_H__ -#define __ARM_IRQS_H__ - -/* Use the imx definitions */ -#include - -/* - * IMX Interrupt numbers - * - */ -#define INT_SOFTINT 0 -#define CSI_INT 6 -#define DSPA_MAC_INT 7 -#define DSPA_INT 8 -#define COMP_INT 9 -#define MSHC_XINT 10 -#define GPIO_INT_PORTA 11 -#define GPIO_INT_PORTB 12 -#define GPIO_INT_PORTC 13 -#define LCDC_INT 14 -#define SIM_INT 15 -#define SIM_DATA_INT 16 -#define RTC_INT 17 -#define RTC_SAMINT 18 -#define UART2_MINT_PFERR 19 -#define UART2_MINT_RTS 20 -#define UART2_MINT_DTR 21 -#define UART2_MINT_UARTC 22 -#define UART2_MINT_TX 23 -#define UART2_MINT_RX 24 -#define UART1_MINT_PFERR 25 -#define UART1_MINT_RTS 26 -#define UART1_MINT_DTR 27 -#define UART1_MINT_UARTC 28 -#define UART1_MINT_TX 29 -#define UART1_MINT_RX 30 -#define VOICE_DAC_INT 31 -#define VOICE_ADC_INT 32 -#define PEN_DATA_INT 33 -#define PWM_INT 34 -#define SDHC_INT 35 -#define I2C_INT 39 -#define CSPI_INT 41 -#define SSI_TX_INT 42 -#define SSI_TX_ERR_INT 43 -#define SSI_RX_INT 44 -#define SSI_RX_ERR_INT 45 -#define TOUCH_INT 46 -#define USBD_INT0 47 -#define USBD_INT1 48 -#define USBD_INT2 49 -#define USBD_INT3 50 -#define USBD_INT4 51 -#define USBD_INT5 52 -#define USBD_INT6 53 -#define BTSYS_INT 55 -#define BTTIM_INT 56 -#define BTWUI_INT 57 -#define TIM2_INT 58 -#define TIM1_INT 59 -#define DMA_ERR 60 -#define DMA_INT 61 -#define GPIO_INT_PORTD 62 - -#define IMX_IRQS (64) - -/* note: the IMX has four gpio ports (A-D), but only - * the following pins are connected to the outside - * world: - * - * PORT A: bits 0-31 - * PORT B: bits 8-31 - * PORT C: bits 3-17 - * PORT D: bits 6-31 - * - * We map these interrupts straight on. As a result we have - * several holes in the interrupt mapping. We do this for two - * reasons: - * - mapping the interrupts without holes would get - * far more complicated - * - Motorola could well decide to bring some processor - * with more pins connected - */ - -#define IRQ_GPIOA(x) (IMX_IRQS + x) -#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) -#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) -#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) - -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5) - -/* all normal IRQs can be FIQs */ -#define FIQ_START 0 -/* switch betwean IRQ and FIQ */ -extern int imx_set_irq_fiq(unsigned int irq, unsigned int type); - -#define NR_IRQS (IRQ_GPIOD(32) + 1) -#define IRQ_GPIO(x) -#endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/memory.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/memory.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/memory.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/memory.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/memory.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MMU_H -#define __ASM_ARCH_MMU_H - -#define PHYS_OFFSET UL(0x08000000) - -#endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/mmc.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/mmc.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/mmc.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/mmc.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,15 +0,0 @@ -#ifndef ASMARM_ARCH_MMC_H -#define ASMARM_ARCH_MMC_H - -#include - -struct device; - -struct imxmmc_platform_data { - int (*card_present)(struct device *); - int (*get_ro)(struct device *); -}; - -extern void imx_set_mmc_info(struct imxmmc_platform_data *info); - -#endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/mx1ads.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/mx1ads.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/mx1ads.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/mx1ads.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,36 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/mx1ads.h - * - * Copyright (C) 2004 Robert Schwebel, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_MX1ADS_H -#define __ASM_ARCH_MX1ADS_H - -/* ------------------------------------------------------------------------ */ -/* Memory Map for the M9328MX1ADS (MX1ADS) Board */ -/* ------------------------------------------------------------------------ */ - -#define MX1ADS_FLASH_PHYS 0x10000000 -#define MX1ADS_FLASH_SIZE (16*1024*1024) - -#define IMX_FB_PHYS (0x0C000000 - 0x40000) - -#define CLK32 32000 - -#endif /* __ASM_ARCH_MX1ADS_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/spi_imx.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/spi_imx.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/spi_imx.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/spi_imx.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,72 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/spi_imx.h - * - * Copyright (C) 2006 SWAPP - * Andrea Paterniani - * - * Initial version inspired by: - * linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef SPI_IMX_H_ -#define SPI_IMX_H_ - - -/*-------------------------------------------------------------------------*/ -/** - * struct spi_imx_master - device.platform_data for SPI controller devices. - * @num_chipselect: chipselects are used to distinguish individual - * SPI slaves, and are numbered from zero to num_chipselects - 1. - * each slave has a chipselect signal, but it's common that not - * every chipselect is connected to a slave. - * @enable_dma: if true enables DMA driven transfers. -*/ -struct spi_imx_master { - u8 num_chipselect; - u8 enable_dma:1; -}; -/*-------------------------------------------------------------------------*/ - - -/*-------------------------------------------------------------------------*/ -/** - * struct spi_imx_chip - spi_board_info.controller_data for SPI - * slave devices, copied to spi_device.controller_data. - * @enable_loopback : used for test purpouse to internally connect RX and TX - * sections. - * @enable_dma : enables dma transfer (provided that controller driver has - * dma enabled too). - * @ins_ss_pulse : enable /SS pulse insertion between SPI burst. - * @bclk_wait : number of bclk waits between each bits_per_word SPI burst. - * @cs_control : function pointer to board-specific function to assert/deassert - * I/O port to control HW generation of devices chip-select. -*/ -struct spi_imx_chip { - u8 enable_loopback:1; - u8 enable_dma:1; - u8 ins_ss_pulse:1; - u16 bclk_wait:15; - void (*cs_control)(u32 control); -}; - -/* Chip-select state */ -#define SPI_CS_ASSERT (1 << 0) -#define SPI_CS_DEASSERT (1 << 1) -/*-------------------------------------------------------------------------*/ - - -#endif /* SPI_IMX_H_*/ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/system.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/system.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/system.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/system.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,40 +0,0 @@ -/* - * arch/arm/mach-imxads/include/mach/system.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void -arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -static inline void -arch_reset(char mode, const char *cmd) -{ - cpu_reset(0); -} - -#endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/timex.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/timex.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/timex.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/timex.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/imx/timex.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE (16000000) - -#endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/uncompress.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/uncompress.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/uncompress.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/uncompress.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,71 +0,0 @@ -/* - * arch/arm/mach-imxads/include/mach/uncompress.h - * - * - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) - -#define UART1_BASE 0x206000 -#define UART2_BASE 0x207000 -#define USR2 0x98 -#define USR2_TXFE (1<<14) -#define TXR 0x40 -#define UCR1 0x80 -#define UCR1_UARTEN 1 - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ -static void putc(int c) -{ - unsigned long serial_port; - - do { - serial_port = UART1_BASE; - if ( UART(UCR1) & UCR1_UARTEN ) - break; - serial_port = UART2_BASE; - if ( UART(UCR1) & UCR1_UARTEN ) - break; - return; - } while(0); - - while (!(UART(USR2) & USR2_TXFE)) - barrier(); - - UART(TXR) = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#define arch_decomp_wdog() diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/vmalloc.h linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/vmalloc.h --- linux-2.6.30-rc4/arch/arm/mach-imx/include/mach/vmalloc.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/include/mach/vmalloc.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/vmalloc.h - * - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/irq.c linux-2.6.30-rc4-git/arch/arm/mach-imx/irq.c --- linux-2.6.30-rc4/arch/arm/mach-imx/irq.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/irq.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,311 +0,0 @@ -/* - * linux/arch/arm/mach-imx/irq.c - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * 03/03/2004 Sascha Hauer - * Copied from the motorola bsp package and added gpio demux - * interrupt handler - */ - -#include -#include -#include -#include - -#include -#include - -#include - -/* - * - * We simply use the ENABLE DISABLE registers inside of the IMX - * to turn on/off specific interrupts. - * - */ - -#define INTCNTL_OFF 0x00 -#define NIMASK_OFF 0x04 -#define INTENNUM_OFF 0x08 -#define INTDISNUM_OFF 0x0C -#define INTENABLEH_OFF 0x10 -#define INTENABLEL_OFF 0x14 -#define INTTYPEH_OFF 0x18 -#define INTTYPEL_OFF 0x1C -#define NIPRIORITY_OFF(x) (0x20+4*(7-(x))) -#define NIVECSR_OFF 0x40 -#define FIVECSR_OFF 0x44 -#define INTSRCH_OFF 0x48 -#define INTSRCL_OFF 0x4C -#define INTFRCH_OFF 0x50 -#define INTFRCL_OFF 0x54 -#define NIPNDH_OFF 0x58 -#define NIPNDL_OFF 0x5C -#define FIPNDH_OFF 0x60 -#define FIPNDL_OFF 0x64 - -#define VA_AITC_BASE IO_ADDRESS(IMX_AITC_BASE) -#define IMX_AITC_INTCNTL (VA_AITC_BASE + INTCNTL_OFF) -#define IMX_AITC_NIMASK (VA_AITC_BASE + NIMASK_OFF) -#define IMX_AITC_INTENNUM (VA_AITC_BASE + INTENNUM_OFF) -#define IMX_AITC_INTDISNUM (VA_AITC_BASE + INTDISNUM_OFF) -#define IMX_AITC_INTENABLEH (VA_AITC_BASE + INTENABLEH_OFF) -#define IMX_AITC_INTENABLEL (VA_AITC_BASE + INTENABLEL_OFF) -#define IMX_AITC_INTTYPEH (VA_AITC_BASE + INTTYPEH_OFF) -#define IMX_AITC_INTTYPEL (VA_AITC_BASE + INTTYPEL_OFF) -#define IMX_AITC_NIPRIORITY(x) (VA_AITC_BASE + NIPRIORITY_OFF(x)) -#define IMX_AITC_NIVECSR (VA_AITC_BASE + NIVECSR_OFF) -#define IMX_AITC_FIVECSR (VA_AITC_BASE + FIVECSR_OFF) -#define IMX_AITC_INTSRCH (VA_AITC_BASE + INTSRCH_OFF) -#define IMX_AITC_INTSRCL (VA_AITC_BASE + INTSRCL_OFF) -#define IMX_AITC_INTFRCH (VA_AITC_BASE + INTFRCH_OFF) -#define IMX_AITC_INTFRCL (VA_AITC_BASE + INTFRCL_OFF) -#define IMX_AITC_NIPNDH (VA_AITC_BASE + NIPNDH_OFF) -#define IMX_AITC_NIPNDL (VA_AITC_BASE + NIPNDL_OFF) -#define IMX_AITC_FIPNDH (VA_AITC_BASE + FIPNDH_OFF) -#define IMX_AITC_FIPNDL (VA_AITC_BASE + FIPNDL_OFF) - -#if 0 -#define DEBUG_IRQ(fmt...) printk(fmt) -#else -#define DEBUG_IRQ(fmt...) do { } while (0) -#endif - -static void -imx_mask_irq(unsigned int irq) -{ - __raw_writel(irq, IMX_AITC_INTDISNUM); -} - -static void -imx_unmask_irq(unsigned int irq) -{ - __raw_writel(irq, IMX_AITC_INTENNUM); -} - -#ifdef CONFIG_FIQ -int imx_set_irq_fiq(unsigned int irq, unsigned int type) -{ - unsigned int irqt; - - if (irq >= IMX_IRQS) - return -EINVAL; - - if (irq < IMX_IRQS / 2) { - irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL); - } else { - irq -= IMX_IRQS / 2; - irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH); - } - - return 0; -} -EXPORT_SYMBOL(imx_set_irq_fiq); -#endif /* CONFIG_FIQ */ - -static int -imx_gpio_irq_type(unsigned int _irq, unsigned int type) -{ - unsigned int irq_type = 0, irq, reg, bit; - - irq = _irq - IRQ_GPIOA(0); - reg = irq >> 5; - bit = 1 << (irq % 32); - - if (type == IRQ_TYPE_PROBE) { - /* Don't mess with enabled GPIOs using preconfigured edges or - GPIOs set to alternate function during probe */ - /* TODO: support probe */ -// if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) & -// GPIO_bit(gpio)) -// return 0; -// if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2))) -// return 0; -// type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - } - - GIUS(reg) |= bit; - DDIR(reg) &= ~(bit); - - DEBUG_IRQ("setting type of irq %d to ", _irq); - - if (type & IRQ_TYPE_EDGE_RISING) { - DEBUG_IRQ("rising edges\n"); - irq_type = 0x0; - } - if (type & IRQ_TYPE_EDGE_FALLING) { - DEBUG_IRQ("falling edges\n"); - irq_type = 0x1; - } - if (type & IRQ_TYPE_LEVEL_LOW) { - DEBUG_IRQ("low level\n"); - irq_type = 0x3; - } - if (type & IRQ_TYPE_LEVEL_HIGH) { - DEBUG_IRQ("high level\n"); - irq_type = 0x2; - } - - if (irq % 32 < 16) { - ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) | - (irq_type << ((irq % 16) * 2)); - } else { - ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) | - (irq_type << ((irq % 16) * 2)); - } - - return 0; - -} - -static void -imx_gpio_ack_irq(unsigned int irq) -{ - DEBUG_IRQ("%s: irq %d\n", __func__, irq); - ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32); -} - -static void -imx_gpio_mask_irq(unsigned int irq) -{ - DEBUG_IRQ("%s: irq %d\n", __func__, irq); - IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32)); -} - -static void -imx_gpio_unmask_irq(unsigned int irq) -{ - DEBUG_IRQ("%s: irq %d\n", __func__, irq); - IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32); -} - -static void -imx_gpio_handler(unsigned int mask, unsigned int irq, - struct irq_desc *desc) -{ - while (mask) { - if (mask & 1) { - DEBUG_IRQ("handling irq %d\n", irq); - generic_handle_irq(irq); - } - irq++; - mask >>= 1; - } -} - -static void -imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(0); - irq = IRQ_GPIOA(0); - imx_gpio_handler(mask, irq, desc); -} - -static void -imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(1); - irq = IRQ_GPIOB(0); - imx_gpio_handler(mask, irq, desc); -} - -static void -imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(2); - irq = IRQ_GPIOC(0); - imx_gpio_handler(mask, irq, desc); -} - -static void -imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(3); - irq = IRQ_GPIOD(0); - imx_gpio_handler(mask, irq, desc); -} - -static struct irq_chip imx_internal_chip = { - .name = "MPU", - .ack = imx_mask_irq, - .mask = imx_mask_irq, - .unmask = imx_unmask_irq, -}; - -static struct irq_chip imx_gpio_chip = { - .name = "GPIO", - .ack = imx_gpio_ack_irq, - .mask = imx_gpio_mask_irq, - .unmask = imx_gpio_unmask_irq, - .set_type = imx_gpio_irq_type, -}; - -void __init -imx_init_irq(void) -{ - unsigned int irq; - - DEBUG_IRQ("Initializing imx interrupts\n"); - - /* Disable all interrupts initially. */ - /* Do not rely on the bootloader. */ - __raw_writel(0, IMX_AITC_INTENABLEH); - __raw_writel(0, IMX_AITC_INTENABLEL); - - /* Mask all GPIO interrupts as well */ - IMR(0) = 0; - IMR(1) = 0; - IMR(2) = 0; - IMR(3) = 0; - - for (irq = 0; irq < IMX_IRQS; irq++) { - set_irq_chip(irq, &imx_internal_chip); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) { - set_irq_chip(irq, &imx_gpio_chip); - set_irq_handler(irq, handle_edge_irq); - set_irq_flags(irq, IRQF_VALID); - } - - set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler); - set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler); - set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler); - set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler); - - /* Release masking of interrupts according to priority */ - __raw_writel(-1, IMX_AITC_NIMASK); - -#ifdef CONFIG_FIQ - /* Initialize FIQ */ - init_FIQ(); -#endif -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/Kconfig linux-2.6.30-rc4-git/arch/arm/mach-imx/Kconfig --- linux-2.6.30-rc4/arch/arm/mach-imx/Kconfig 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/Kconfig 1970-01-01 01:00:00.000000000 +0100 @@ -1,11 +0,0 @@ -menu "IMX Implementations" - depends on ARCH_IMX - -config ARCH_MX1ADS - bool "mx1ads" - depends on ARCH_IMX - select ISA - help - Say Y here if you are using the Motorola MX1ADS board - -endmenu diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/leds.c linux-2.6.30-rc4-git/arch/arm/mach-imx/leds.c --- linux-2.6.30-rc4/arch/arm/mach-imx/leds.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/leds.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,31 +0,0 @@ -/* - * linux/arch/arm/mach-imx/leds.c - * - * Copyright (C) 2004 Sascha Hauer - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include - -#include -#include - -#include "leds.h" - -static int __init -leds_init(void) -{ - if (machine_is_mx1ads()) { - leds_event = mx1ads_leds_event; - } - - return 0; -} - -__initcall(leds_init); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/leds.h linux-2.6.30-rc4-git/arch/arm/mach-imx/leds.h --- linux-2.6.30-rc4/arch/arm/mach-imx/leds.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/leds.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-imx/leds.h - * - * Copyright (c) 2004 Sascha Hauer - * - * blinky lights for IMX-based systems - * - */ -extern void mx1ads_leds_event(led_event_t evt); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/leds-mx1ads.c linux-2.6.30-rc4-git/arch/arm/mach-imx/leds-mx1ads.c --- linux-2.6.30-rc4/arch/arm/mach-imx/leds-mx1ads.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/leds-mx1ads.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,53 +0,0 @@ -/* - * linux/arch/arm/mach-imx/leds-mx1ads.c - * - * Copyright (c) 2004 Sascha Hauer - * - * Original (leds-footbridge.c) by Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include "leds.h" - -/* - * The MX1ADS Board has only one usable LED, - * so select only the timer led or the - * cpu usage led - */ -void -mx1ads_leds_event(led_event_t ledevt) -{ - unsigned long flags; - - local_irq_save(flags); - - switch (ledevt) { -#ifdef CONFIG_LEDS_CPU - case led_idle_start: - DR(0) &= ~(1<<2); - break; - - case led_idle_end: - DR(0) |= 1<<2; - break; -#endif - -#ifdef CONFIG_LEDS_TIMER - case led_timer: - DR(0) ^= 1<<2; -#endif - default: - break; - } - local_irq_restore(flags); -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/Makefile linux-2.6.30-rc4-git/arch/arm/mach-imx/Makefile --- linux-2.6.30-rc4/arch/arm/mach-imx/Makefile 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/Makefile 1970-01-01 01:00:00.000000000 +0100 @@ -1,18 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y += irq.o time.o dma.o generic.o clock.o - -obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o - -# Specific board support -obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o - -# Support for blinky lights -led-y := leds.o - -obj-$(CONFIG_LEDS) += $(led-y) -led-$(CONFIG_ARCH_MX1ADS) += leds-mx1ads.o diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/Makefile.boot linux-2.6.30-rc4-git/arch/arm/mach-imx/Makefile.boot --- linux-2.6.30-rc4/arch/arm/mach-imx/Makefile.boot 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/Makefile.boot 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ - zreladdr-$(CONFIG_ARCH_MX1ADS) := 0x08008000 - diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/mx1ads.c linux-2.6.30-rc4-git/arch/arm/mach-imx/mx1ads.c --- linux-2.6.30-rc4/arch/arm/mach-imx/mx1ads.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/mx1ads.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,180 +0,0 @@ -/* - * arch/arm/mach-imx/mx1ads.c - * - * Initially based on: - * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c - * Copyright (c) 2004 Sascha Hauer - * - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include "generic.h" - -static struct resource cs89x0_resources[] = { - [0] = { - .start = IMX_CS4_PHYS + 0x300, - .end = IMX_CS4_PHYS + 0x300 + 16, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_GPIOC(17), - .end = IRQ_GPIOC(17), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cs89x0_device = { - .name = "cirrus-cs89x0", - .num_resources = ARRAY_SIZE(cs89x0_resources), - .resource = cs89x0_resources, -}; - -static struct imxuart_platform_data uart_pdata = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct resource imx_uart1_resources[] = { - [0] = { - .start = 0x00206000, - .end = 0x002060FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (UART1_MINT_RX), - .end = (UART1_MINT_RX), - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = (UART1_MINT_TX), - .end = (UART1_MINT_TX), - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = UART1_MINT_RTS, - .end = UART1_MINT_RTS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device imx_uart1_device = { - .name = "imx-uart", - .id = 0, - .num_resources = ARRAY_SIZE(imx_uart1_resources), - .resource = imx_uart1_resources, - .dev = { - .platform_data = &uart_pdata, - } -}; - -static struct resource imx_uart2_resources[] = { - [0] = { - .start = 0x00207000, - .end = 0x002070FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (UART2_MINT_RX), - .end = (UART2_MINT_RX), - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = (UART2_MINT_TX), - .end = (UART2_MINT_TX), - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = UART2_MINT_RTS, - .end = UART2_MINT_RTS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device imx_uart2_device = { - .name = "imx-uart", - .id = 1, - .num_resources = ARRAY_SIZE(imx_uart2_resources), - .resource = imx_uart2_resources, - .dev = { - .platform_data = &uart_pdata, - } -}; - -static struct platform_device *devices[] __initdata = { - &cs89x0_device, - &imx_uart1_device, - &imx_uart2_device, -}; - -#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE) -static int mx1ads_mmc_card_present(struct device *dev) -{ - /* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */ - return (SSR(1) & (1 << 20) ? 0 : 1); -} - -static struct imxmmc_platform_data mx1ads_mmc_info = { - .card_present = mx1ads_mmc_card_present, -}; -#endif - -static void __init -mx1ads_init(void) -{ -#ifdef CONFIG_LEDS - imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2); -#endif -#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE) - /* SD/MMC card detect */ - imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20); - imx_set_mmc_info(&mx1ads_mmc_info); -#endif - - imx_gpio_mode(PC9_PF_UART1_CTS); - imx_gpio_mode(PC10_PF_UART1_RTS); - imx_gpio_mode(PC11_PF_UART1_TXD); - imx_gpio_mode(PC12_PF_UART1_RXD); - - imx_gpio_mode(PB28_PF_UART2_CTS); - imx_gpio_mode(PB29_PF_UART2_RTS); - imx_gpio_mode(PB30_PF_UART2_TXD); - imx_gpio_mode(PB31_PF_UART2_RXD); - - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init -mx1ads_map_io(void) -{ - imx_map_io(); -} - -MACHINE_START(MX1ADS, "Motorola MX1ADS") - /* Maintainer: Sascha Hauer, Pengutronix */ - .phys_io = 0x00200000, - .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, - .boot_params = 0x08000100, - .map_io = mx1ads_map_io, - .init_irq = imx_init_irq, - .timer = &imx_timer, - .init_machine = mx1ads_init, -MACHINE_END diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-imx/time.c linux-2.6.30-rc4-git/arch/arm/mach-imx/time.c --- linux-2.6.30-rc4/arch/arm/mach-imx/time.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-imx/time.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,220 +0,0 @@ -/* - * linux/arch/arm/mach-imx/time.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* Use timer 1 as system timer */ -#define TIMER_BASE IMX_TIM1_BASE - -static struct clock_event_device clockevent_imx; -static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; - -/* - * IRQ handler for the timer - */ -static irqreturn_t -imx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &clockevent_imx; - uint32_t tstat; - irqreturn_t ret = IRQ_NONE; - - /* clear the interrupt */ - tstat = IMX_TSTAT(TIMER_BASE); - IMX_TSTAT(TIMER_BASE) = 0; - - if (tstat & TSTAT_COMP) { - evt->event_handler(evt); - ret = IRQ_HANDLED; - } - - return ret; -} - -static struct irqaction imx_timer_irq = { - .name = "i.MX Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = imx_timer_interrupt, -}; - -/* - * Set up timer hardware into expected mode and state. - */ -static void __init imx_timer_hardware_init(void) -{ - /* - * Initialise to a known state (all timers off, and timing reset) - */ - IMX_TCTL(TIMER_BASE) = 0; - IMX_TPRER(TIMER_BASE) = 0; - - IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN; -} - -cycle_t imx_get_cycles(struct clocksource *cs) -{ - return IMX_TCN(TIMER_BASE); -} - -static struct clocksource clocksource_imx = { - .name = "imx_timer1", - .rating = 200, - .read = imx_get_cycles, - .mask = 0xFFFFFFFF, - .shift = 20, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int __init imx_clocksource_init(unsigned long rate) -{ - clocksource_imx.mult = - clocksource_hz2mult(rate, clocksource_imx.shift); - clocksource_register(&clocksource_imx); - - return 0; -} - -static int imx_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long tcmp; - - tcmp = IMX_TCN(TIMER_BASE) + evt; - IMX_TCMP(TIMER_BASE) = tcmp; - - return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0; -} - -#ifdef DEBUG -static const char *clock_event_mode_label[]={ - [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", - [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", - [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", - [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" -}; -#endif /*DEBUG*/ - -static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) -{ - unsigned long flags; - - /* - * The timer interrupt generation is disabled at least - * for enough time to call imx_set_next_event() - */ - local_irq_save(flags); - /* Disable interrupt in GPT module */ - IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN; - if (mode != clockevent_mode) { - /* Set event time into far-far future */ - IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3; - /* Clear pending interrupt */ - IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP; - } - -#ifdef DEBUG - printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n", - clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]); -#endif /*DEBUG*/ - - /* Remember timer mode */ - clockevent_mode = mode; - local_irq_restore(flags); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n"); - break; - case CLOCK_EVT_MODE_ONESHOT: - /* - * Do not put overhead of interrupt enable/disable into - * imx_set_next_event(), the core has about 4 minutes - * to call imx_set_next_event() or shutdown clock after - * mode switching - */ - local_irq_save(flags); - IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN; - local_irq_restore(flags); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - /* Left event sources disabled, no more interrupts appears */ - break; - } -} - -static struct clock_event_device clockevent_imx = { - .name = "imx_timer1", - .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, - .set_mode = imx_set_mode, - .set_next_event = imx_set_next_event, - .rating = 200, -}; - -static int __init imx_clockevent_init(unsigned long rate) -{ - clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC, - clockevent_imx.shift); - clockevent_imx.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &clockevent_imx); - clockevent_imx.min_delta_ns = - clockevent_delta2ns(0xf, &clockevent_imx); - - clockevent_imx.cpumask = cpumask_of(0); - - clockevents_register_device(&clockevent_imx); - - return 0; -} - -extern int imx_clocks_init(void); - -static void __init imx_timer_init(void) -{ - struct clk *clk; - unsigned long rate; - - imx_clocks_init(); - - clk = clk_get(NULL, "perclk1"); - clk_enable(clk); - rate = clk_get_rate(clk); - - imx_timer_hardware_init(); - imx_clocksource_init(rate); - - imx_clockevent_init(rate); - - /* - * Make irqs happen for the system timer - */ - setup_irq(TIM1_INT, &imx_timer_irq); -} - -struct sys_timer imx_timer = { - .init = imx_timer_init, -}; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx1/generic.c linux-2.6.30-rc4-git/arch/arm/mach-mx1/generic.c --- linux-2.6.30-rc4/arch/arm/mach-mx1/generic.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx1/generic.c 2009-05-13 09:46:19.000000000 +0200 @@ -26,6 +26,7 @@ #include +#include #include static struct map_desc imx_io_desc[] __initdata = { @@ -37,7 +38,9 @@ static struct map_desc imx_io_desc[] __i } }; -void __init mxc_map_io(void) +void __init mx1_map_io(void) { + mxc_set_cpu_type(MXC_CPU_MX1); + iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx1/mx1ads.c linux-2.6.30-rc4-git/arch/arm/mach-mx1/mx1ads.c --- linux-2.6.30-rc4/arch/arm/mach-mx1/mx1ads.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx1/mx1ads.c 2009-05-13 09:46:19.000000000 +0200 @@ -12,77 +12,56 @@ * warranty of any kind, whether express or implied. */ -#include +#include +#include #include +#include #include #include -#include -#include #include #include #include -#include -#include #include -#include -#include +#include #include +#include #include +#include + #include "devices.h" -/* - * UARTs platform data - */ -static int mxc_uart1_pins[] = { +static int mx1ads_pins[] = { + /* UART1 */ PC9_PF_UART1_CTS, PC10_PF_UART1_RTS, PC11_PF_UART1_TXD, PC12_PF_UART1_RXD, -}; - -static int uart1_mxc_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); -} - -static int uart1_mxc_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins)); - return 0; -} - -static int mxc_uart2_pins[] = { + /* UART2 */ PB28_PF_UART2_CTS, PB29_PF_UART2_RTS, PB30_PF_UART2_TXD, PB31_PF_UART2_RXD, + /* I2C */ + PA15_PF_I2C_SDA, + PA16_PF_I2C_SCL, + /* SPI */ + PC13_PF_SPI1_SPI_RDY, + PC14_PF_SPI1_SCLK, + PC15_PF_SPI1_SS, + PC16_PF_SPI1_MISO, + PC17_PF_SPI1_MOSI, }; -static int uart2_mxc_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins), "UART2"); -} - -static int uart2_mxc_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins)); - return 0; -} +/* + * UARTs platform data + */ static struct imxuart_platform_data uart_pdata[] = { { - .init = uart1_mxc_init, - .exit = uart1_mxc_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart2_mxc_init, - .exit = uart2_mxc_exit, .flags = IMXUART_HAVE_RTSCTS, }, }; @@ -111,24 +90,6 @@ static struct platform_device flash_devi /* * I2C */ - -static int i2c_pins[] = { - PA15_PF_I2C_SDA, - PA16_PF_I2C_SCL, -}; - -static int i2c_init(struct device *dev) -{ - return mxc_gpio_setup_multiple_pins(i2c_pins, - ARRAY_SIZE(i2c_pins), "I2C"); -} - -static void i2c_exit(struct device *dev) -{ - mxc_gpio_release_multiple_pins(i2c_pins, - ARRAY_SIZE(i2c_pins)); -} - static struct pcf857x_platform_data pcf857x_data[] = { { .gpio_base = 4 * 32, @@ -139,8 +100,6 @@ static struct pcf857x_platform_data pcf8 static struct imxi2c_platform_data mx1ads_i2c_data = { .bitrate = 100000, - .init = i2c_init, - .exit = i2c_exit, }; static struct i2c_board_info mx1ads_i2c_devices[] = { @@ -160,6 +119,9 @@ static struct i2c_board_info mx1ads_i2c_ */ static void __init mx1ads_init(void) { + mxc_gpio_setup_multiple_pins(mx1ads_pins, + ARRAY_SIZE(mx1ads_pins), "mx1ads"); + /* UART */ mxc_register_device(&imx_uart1_device, &uart_pdata[0]); mxc_register_device(&imx_uart2_device, &uart_pdata[1]); @@ -188,7 +150,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS" .phys_io = IMX_IO_PHYS, .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx1_map_io, .init_irq = mxc_init_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, @@ -198,7 +160,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS" .phys_io = IMX_IO_PHYS, .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx1_map_io, .init_irq = mxc_init_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx1/scb9328.c linux-2.6.30-rc4-git/arch/arm/mach-mx1/scb9328.c --- linux-2.6.30-rc4/arch/arm/mach-mx1/scb9328.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx1/scb9328.c 2009-05-13 09:46:19.000000000 +0200 @@ -153,7 +153,7 @@ MACHINE_START(SCB9328, "Synertronixx scb .phys_io = 0x00200000, .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc, .boot_params = 0x08000100, - .map_io = mxc_map_io, + .map_io = mx1_map_io, .init_irq = mxc_init_irq, .timer = &scb9328_timer, .init_machine = scb9328_init, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx2/generic.c linux-2.6.30-rc4-git/arch/arm/mach-mx2/generic.c --- linux-2.6.30-rc4/arch/arm/mach-mx2/generic.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx2/generic.c 2009-05-13 09:46:19.000000000 +0200 @@ -69,7 +69,17 @@ static struct map_desc mxc_io_desc[] __i * system startup to create static physical to virtual * memory map for the IO modules. */ -void __init mxc_map_io(void) +void __init mx21_map_io(void) { + mxc_set_cpu_type(MXC_CPU_MX21); + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } + +void __init mx27_map_io(void) +{ + mxc_set_cpu_type(MXC_CPU_MX27); + + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} + diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx2/Kconfig linux-2.6.30-rc4-git/arch/arm/mach-mx2/Kconfig --- linux-2.6.30-rc4/arch/arm/mach-mx2/Kconfig 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx2/Kconfig 2009-05-13 09:46:19.000000000 +0200 @@ -18,6 +18,13 @@ endchoice comment "MX2 platforms:" +config MACH_MX21ADS + bool "MX21ADS platform" + depends on MACH_MX21 + help + Include support for MX21ADS platform. This includes specific + configurations for the board and its peripherals. + config MACH_MX27ADS bool "MX27ADS platform" depends on MACH_MX27 @@ -46,4 +53,10 @@ config MACH_PCM970_BASEBOARD endchoice +config MACH_MX27_3DS + bool "MX27PDK platform" + depends on MACH_MX27 + help + Include support for MX27PDK platform. This includes specific + configurations for the board and its peripherals. endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx2/Makefile linux-2.6.30-rc4-git/arch/arm/mach-mx2/Makefile --- linux-2.6.30-rc4/arch/arm/mach-mx2/Makefile 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx2/Makefile 2009-05-13 09:46:19.000000000 +0200 @@ -11,6 +11,8 @@ obj-$(CONFIG_MACH_MX21) += clock_imx21.o obj-$(CONFIG_MACH_MX27) += cpu_imx27.o obj-$(CONFIG_MACH_MX27) += clock_imx27.o +obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o obj-$(CONFIG_MACH_PCM038) += pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o +obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx2/mx21ads.c linux-2.6.30-rc4-git/arch/arm/mach-mx2/mx21ads.c --- linux-2.6.30-rc4/arch/arm/mach-mx2/mx21ads.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx2/mx21ads.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,286 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "devices.h" + +static unsigned int mx21ads_pins[] = { + + /* CS8900A */ + (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11), + + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + + /* UART3 (IrDA) - only TXD and RXD */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + + /* UART4 */ + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD, + + /* LCDC */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA24_PF_REV, /* Sharp panel dedicated signal */ + PA25_PF_CLS, /* Sharp panel dedicated signal */ + PA26_PF_PS, /* Sharp panel dedicated signal */ + PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */ + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + + /* MMC/SDHC */ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + + /* NFC */ + PF0_PF_NRFB, + PF1_PF_NFCE, + PF2_PF_NFWP, + PF3_PF_NFCLE, + PF4_PF_NFALE, + PF5_PF_NFRE, + PF6_PF_NFWE, + PF7_PF_NFIO0, + PF8_PF_NFIO1, + PF9_PF_NFIO2, + PF10_PF_NFIO3, + PF11_PF_NFIO4, + PF12_PF_NFIO5, + PF13_PF_NFIO6, + PF14_PF_NFIO7, +}; + +/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */ +static struct physmap_flash_data mx21ads_flash_data = { + .width = 4, +}; + +static struct resource mx21ads_flash_resource = { + .start = CS0_BASE_ADDR, + .end = CS0_BASE_ADDR + 0x02000000 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mx21ads_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &mx21ads_flash_data, + }, + .num_resources = 1, + .resource = &mx21ads_flash_resource, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct imxuart_platform_data uart_norts_pdata = { +}; + + +static int mx21ads_fb_init(struct platform_device *pdev) +{ + u16 tmp; + + tmp = __raw_readw(MX21ADS_IO_REG); + tmp |= MX21ADS_IO_LCDON; + __raw_writew(tmp, MX21ADS_IO_REG); + return 0; +} + +static void mx21ads_fb_exit(struct platform_device *pdev) +{ + u16 tmp; + + tmp = __raw_readw(MX21ADS_IO_REG); + tmp &= ~MX21ADS_IO_LCDON; + __raw_writew(tmp, MX21ADS_IO_REG); +} + +/* + * Connected is a portrait Sharp-QVGA display + * of type: LQ035Q7DB02 + */ +static struct imx_fb_platform_data mx21ads_fb_data = { + .pixclock = 188679, /* in ps */ + .xres = 240, + .yres = 320, + + .bpp = 16, + .hsync_len = 2, + .left_margin = 6, + .right_margin = 16, + + .vsync_len = 1, + .upper_margin = 8, + .lower_margin = 10, + .fixed_screen_cpu = 0, + + .pcr = 0xFB108BC7, + .pwmr = 0x00A901ff, + .lscr1 = 0x00120300, + .dmacr = 0x00020008, + + .init = mx21ads_fb_init, + .exit = mx21ads_fb_exit, +}; + +static int mx21ads_sdhc_get_ro(struct device *dev) +{ + return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0; +} + +static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = request_irq(IRQ_GPIOD(25), detect_irq, + IRQF_TRIGGER_FALLING, "mmc-detect", data); + if (ret) + goto out; + return 0; +out: + return ret; +} + +static void mx21ads_sdhc_exit(struct device *dev, void *data) +{ + free_irq(IRQ_GPIOD(25), data); +} + +static struct imxmmc_platform_data mx21ads_sdhc_pdata = { + .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */ + .get_ro = mx21ads_sdhc_get_ro, + .init = mx21ads_sdhc_init, + .exit = mx21ads_sdhc_exit, +}; + +static struct mxc_nand_platform_data mx21ads_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + +static struct map_desc mx21ads_io_desc[] __initdata = { + /* + * Memory-mapped I/O on MX21ADS Base board: + * - CS8900A Ethernet controller + * - ST16C2552CJ UART + * - CPU and Base board version + * - Base board I/O register + */ + { + .virtual = MX21ADS_MMIO_BASE_ADDR, + .pfn = __phys_to_pfn(CS1_BASE_ADDR), + .length = MX21ADS_MMIO_SIZE, + .type = MT_DEVICE, + }, +}; + +static void __init mx21ads_map_io(void) +{ + mx21_map_io(); + iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc)); +} + +static struct platform_device *platform_devices[] __initdata = { + &mx21ads_nor_mtd_device, +}; + +static void __init mx21ads_board_init(void) +{ + mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins), + "mx21ads"); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_uart_device2, &uart_norts_pdata); + mxc_register_device(&mxc_uart_device3, &uart_pdata); + mxc_register_device(&mxc_fb_device, &mx21ads_fb_data); + mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata); + mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mx21ads_timer_init(void) +{ + mx21_clocks_init(32768, 26000000); +} + +static struct sys_timer mx21ads_timer = { + .init = mx21ads_timer_init, +}; + +MACHINE_START(MX21ADS, "Freescale i.MX21ADS") + /* maintainer: Freescale Semiconductor, Inc. */ + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx21ads_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx21ads_board_init, + .timer = &mx21ads_timer, +MACHINE_END diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx2/mx27ads.c linux-2.6.30-rc4-git/arch/arm/mach-mx2/mx27ads.c --- linux-2.6.30-rc4/arch/arm/mach-mx2/mx27ads.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx2/mx27ads.c 2009-05-13 09:46:19.000000000 +0200 @@ -23,6 +23,8 @@ #include #include #include +#include +#include #include #include #include @@ -33,9 +35,117 @@ #include #include #include +#include +#include +#include +#include #include "devices.h" +static unsigned int mx27ads_pins[] = { + /* UART0 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* UART1 */ + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD, + /* UART2 */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE11_PF_UART3_RTS, + /* UART3 */ + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD, + /* UART4 */ + PB18_AF_UART5_TXD, + PB19_AF_UART5_RXD, + PB20_AF_UART5_CTS, + PB21_AF_UART5_RTS, + /* UART5 */ + PB10_AF_UART6_TXD, + PB12_AF_UART6_CTS, + PB11_AF_UART6_RXD, + PB13_AF_UART6_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* I2C2 */ + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* FB */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA24_PF_REV, + PA25_PF_CLS, + PA26_PF_PS, + PA27_PF_SPL_SPR, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + /* OWIRE */ + PE16_AF_OWIRE, + /* SDHC1*/ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + /* SDHC2*/ + PB4_PF_SD2_D0, + PB5_PF_SD2_D1, + PB6_PF_SD2_D2, + PB7_PF_SD2_D3, + PB8_PF_SD2_CMD, + PB9_PF_SD2_CLK, +}; + +static struct mxc_nand_platform_data mx27ads_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + /* ADS's NOR flash */ static struct physmap_flash_data mx27ads_flash_data = { .width = 2, @@ -58,189 +168,113 @@ static struct platform_device mx27ads_no .resource = &mx27ads_flash_resource, }; -static int mxc_uart0_pins[] = { - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS +static struct imxi2c_platform_data mx27ads_i2c_data = { + .bitrate = 100000, }; -static int uart_mxc_port0_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins), "UART0"); -} - -static int uart_mxc_port0_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins)); - return 0; -} - -static int mxc_uart1_pins[] = { - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD +static struct i2c_board_info mx27ads_i2c_devices[] = { }; -static int uart_mxc_port1_init(struct platform_device *pdev) +void lcd_power(int on) { - return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); + if (on) + __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG); + else + __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); } -static int uart_mxc_port1_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins)); - return 0; -} +static struct imx_fb_platform_data mx27ads_fb_data = { + .pixclock = 188679, + .xres = 240, + .yres = 320, -static int mxc_uart2_pins[] = { - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS -}; + .bpp = 16, + .hsync_len = 1, + .left_margin = 9, + .right_margin = 16, -static int uart_mxc_port2_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins), "UART2"); -} + .vsync_len = 1, + .upper_margin = 7, + .lower_margin = 9, + .fixed_screen_cpu = 0, -static int uart_mxc_port2_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins)); - return 0; -} + /* + * - HSYNC active high + * - VSYNC active high + * - clk notenabled while idle + * - clock inverted + * - data not inverted + * - data enable low active + * - enable sharp mode + */ + .pcr = 0xFB008BC0, + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, -static int mxc_uart3_pins[] = { - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD + .lcd_power = lcd_power, }; -static int uart_mxc_port3_init(struct platform_device *pdev) +static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) { - return mxc_gpio_setup_multiple_pins(mxc_uart3_pins, - ARRAY_SIZE(mxc_uart3_pins), "UART3"); + return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING, + "sdhc1-card-detect", data); } -static int uart_mxc_port3_exit(struct platform_device *pdev) +static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) { - mxc_gpio_release_multiple_pins(mxc_uart3_pins, - ARRAY_SIZE(mxc_uart3_pins)); - return 0; + return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING, + "sdhc2-card-detect", data); } -static int mxc_uart4_pins[] = { - PB18_AF_UART5_TXD, - PB19_AF_UART5_RXD, - PB20_AF_UART5_CTS, - PB21_AF_UART5_RTS -}; - -static int uart_mxc_port4_init(struct platform_device *pdev) +static void mx27ads_sdhc1_exit(struct device *dev, void *data) { - return mxc_gpio_setup_multiple_pins(mxc_uart4_pins, - ARRAY_SIZE(mxc_uart4_pins), "UART4"); + free_irq(IRQ_GPIOE(21), data); } -static int uart_mxc_port4_exit(struct platform_device *pdev) +static void mx27ads_sdhc2_exit(struct device *dev, void *data) { - mxc_gpio_release_multiple_pins(mxc_uart4_pins, - ARRAY_SIZE(mxc_uart4_pins)); - return 0; + free_irq(IRQ_GPIOB(7), data); } -static int mxc_uart5_pins[] = { - PB10_AF_UART6_TXD, - PB12_AF_UART6_CTS, - PB11_AF_UART6_RXD, - PB13_AF_UART6_RTS +static struct imxmmc_platform_data sdhc1_pdata = { + .init = mx27ads_sdhc1_init, + .exit = mx27ads_sdhc1_exit, }; -static int uart_mxc_port5_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart5_pins, - ARRAY_SIZE(mxc_uart5_pins), "UART5"); -} - -static int uart_mxc_port5_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart5_pins, - ARRAY_SIZE(mxc_uart5_pins)); - return 0; -} +static struct imxmmc_platform_data sdhc2_pdata = { + .init = mx27ads_sdhc2_init, + .exit = mx27ads_sdhc2_exit, +}; static struct platform_device *platform_devices[] __initdata = { &mx27ads_nor_mtd_device, &mxc_fec_device, + &mxc_w1_master_device, }; -static int mxc_fec_pins[] = { - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN -}; - -static void gpio_fec_active(void) -{ - mxc_gpio_setup_multiple_pins(mxc_fec_pins, - ARRAY_SIZE(mxc_fec_pins), "FEC"); -} - static struct imxuart_platform_data uart_pdata[] = { { - .init = uart_mxc_port0_init, - .exit = uart_mxc_port0_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port1_init, - .exit = uart_mxc_port1_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port2_init, - .exit = uart_mxc_port2_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port3_init, - .exit = uart_mxc_port3_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port4_init, - .exit = uart_mxc_port4_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port5_init, - .exit = uart_mxc_port5_exit, .flags = IMXUART_HAVE_RTSCTS, }, }; static void __init mx27ads_board_init(void) { - gpio_fec_active(); + mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins), + "mx27ads"); mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); @@ -248,6 +282,15 @@ static void __init mx27ads_board_init(vo mxc_register_device(&mxc_uart_device3, &uart_pdata[3]); mxc_register_device(&mxc_uart_device4, &uart_pdata[4]); mxc_register_device(&mxc_uart_device5, &uart_pdata[5]); + mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info); + + /* only the i2c master 1 is used on this CPU card */ + i2c_register_board_info(1, mx27ads_i2c_devices, + ARRAY_SIZE(mx27ads_i2c_devices)); + mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data); + mxc_register_device(&mxc_fb_device, &mx27ads_fb_data); + mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); + mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } @@ -277,7 +320,7 @@ static struct map_desc mx27ads_io_desc[] static void __init mx27ads_map_io(void) { - mxc_map_io(); + mx27_map_io(); iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc)); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx2/mx27pdk.c linux-2.6.30-rc4-git/arch/arm/mach-mx2/mx27pdk.c --- linux-2.6.30-rc4/arch/arm/mach-mx2/mx27pdk.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx2/mx27pdk.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,95 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "devices.h" + +static unsigned int mx27pdk_pins[] = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *platform_devices[] __initdata = { + &mxc_fec_device, +}; + +static void __init mx27pdk_init(void) +{ + mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), + "mx27pdk"); + mxc_register_device(&mxc_uart_device0, &uart_pdata); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mx27pdk_timer_init(void) +{ + mx27_clocks_init(26000000); +} + +static struct sys_timer mx27pdk_timer = { + .init = mx27pdk_timer_init, +}; + +MACHINE_START(MX27_3DS, "Freescale MX27PDK") + /* maintainer: Freescale Semiconductor, Inc. */ + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mxc_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx27pdk_init, + .timer = &mx27pdk_timer, +MACHINE_END diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx2/pcm038.c linux-2.6.30-rc4-git/arch/arm/mach-mx2/pcm038.c --- linux-2.6.30-rc4/arch/arm/mach-mx2/pcm038.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx2/pcm038.c 2009-05-13 09:46:19.000000000 +0200 @@ -17,28 +17,84 @@ * MA 02110-1301, USA. */ -#include -#include -#include -#include #include #include +#include +#include +#include +#include -#include #include +#include +#include + +#include #include #include -#include -#ifdef CONFIG_I2C_IMX #include -#endif -#include +#include #include -#include #include #include "devices.h" +static int pcm038_pins[] = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* UART2 */ + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD, + /* UART3 */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE11_PF_UART3_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* I2C2 */ + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* SPI1 */ + PD25_PF_CSPI1_RDY, + PD27_PF_CSPI1_SS1, + PD28_PF_CSPI1_SS0, + PD29_PF_CSPI1_SCLK, + PD30_PF_CSPI1_MISO, + PD31_PF_CSPI1_MOSI, + /* SSI1 */ + PC20_PF_SSI1_FS, + PC21_PF_SSI1_RXD, + PC22_PF_SSI1_TXD, + PC23_PF_SSI1_CLK, + /* SSI4 */ + PC16_PF_SSI4_FS, + PC17_PF_SSI4_RXD, + PC18_PF_SSI4_TXD, + PC19_PF_SSI4_CLK, +}; + /* * Phytec's PCM038 comes with 2MiB battery buffered SRAM, * 16 bit width @@ -88,107 +144,16 @@ static struct platform_device pcm038_nor .resource = &pcm038_flash_resource, }; -static int mxc_uart0_pins[] = { - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS -}; - -static int uart_mxc_port0_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins), "UART0"); -} - -static int uart_mxc_port0_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins)); - return 0; -} - -static int mxc_uart1_pins[] = { - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD -}; - -static int uart_mxc_port1_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); -} - -static int uart_mxc_port1_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins)); - return 0; -} - -static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS }; - -static int uart_mxc_port2_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins), "UART2"); -} - -static int uart_mxc_port2_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins)); - return 0; -} - static struct imxuart_platform_data uart_pdata[] = { { - .init = uart_mxc_port0_init, - .exit = uart_mxc_port0_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port1_init, - .exit = uart_mxc_port1_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port2_init, - .exit = uart_mxc_port2_exit, .flags = IMXUART_HAVE_RTSCTS, }, }; -static int mxc_fec_pins[] = { - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN -}; - -static void gpio_fec_active(void) -{ - mxc_gpio_setup_multiple_pins(mxc_fec_pins, - ARRAY_SIZE(mxc_fec_pins), "FEC"); -} - static struct mxc_nand_platform_data pcm038_nand_board_info = { .width = 1, .hw_ecc = 1, @@ -210,27 +175,8 @@ static void __init pcm038_init_sram(void __raw_writel(0x22220a00, CSCR_A(1)); } -#ifdef CONFIG_I2C_IMX -static int mxc_i2c1_pins[] = { - PC5_PF_I2C2_SDA, - PC6_PF_I2C2_SCL -}; - -static int pcm038_i2c_1_init(struct device *dev) -{ - return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins), - "I2C1"); -} - -static void pcm038_i2c_1_exit(struct device *dev) -{ - mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins)); -} - static struct imxi2c_platform_data pcm038_i2c_1_data = { .bitrate = 100000, - .init = pcm038_i2c_1_init, - .exit = pcm038_i2c_1_exit, }; static struct at24_platform_data board_eeprom = { @@ -253,11 +199,12 @@ static struct i2c_board_info pcm038_i2c_ .type = "lm75" } }; -#endif static void __init pcm038_init(void) { - gpio_fec_active(); + mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), + "PCM038"); + pcm038_init_sram(); mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); @@ -267,13 +214,11 @@ static void __init pcm038_init(void) mxc_gpio_mode(PE16_AF_OWIRE); mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info); -#ifdef CONFIG_I2C_IMX /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, pcm038_i2c_devices, ARRAY_SIZE(pcm038_i2c_devices)); mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data); -#endif platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); @@ -295,7 +240,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27") .phys_io = AIPI_BASE_ADDR, .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx27_map_io, .init_irq = mxc_init_irq, .init_machine = pcm038_init, .timer = &pcm038_timer, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx2/pcm970-baseboard.c linux-2.6.30-rc4-git/arch/arm/mach-mx2/pcm970-baseboard.c --- linux-2.6.30-rc4/arch/arm/mach-mx2/pcm970-baseboard.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx2/pcm970-baseboard.c 2009-05-13 09:46:19.000000000 +0200 @@ -16,71 +16,107 @@ * MA 02110-1301, USA. */ -#include #include #include +#include #include -#include #include -#include -#include #include +#include +#include +#include #include "devices.h" -static int pcm970_sdhc2_get_ro(struct device *dev) -{ - return gpio_get_value(GPIO_PORTC + 28); -} - -static int pcm970_sdhc2_pins[] = { +static int pcm970_pins[] = { + /* SDHC */ PB4_PF_SD2_D0, PB5_PF_SD2_D1, PB6_PF_SD2_D2, PB7_PF_SD2_D3, PB8_PF_SD2_CMD, PB9_PF_SD2_CLK, + GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */ + /* display */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA24_PF_REV, + PA25_PF_CLS, + PA26_PF_PS, + PA27_PF_SPL_SPR, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + /* + * it seems the data line misses a pullup, so we must enable + * the internal pullup as a local workaround + */ + PD17_PF_I2C_DATA | GPIO_PUEN, + PD18_PF_I2C_CLK, + /* Camera */ + PB10_PF_CSI_D0, + PB11_PF_CSI_D1, + PB12_PF_CSI_D2, + PB13_PF_CSI_D3, + PB14_PF_CSI_D4, + PB15_PF_CSI_MCLK, + PB16_PF_CSI_PIXCLK, + PB17_PF_CSI_D5, + PB18_PF_CSI_D6, + PB19_PF_CSI_D7, + PB20_PF_CSI_VSYNC, + PB21_PF_CSI_HSYNC, }; +static int pcm970_sdhc2_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_PORTC + 28); +} + static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data) { int ret; - ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins, - ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2"); - if(ret) - return ret; - - ret = request_irq(IRQ_GPIOC(29), detect_irq, 0, + ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); if (ret) - goto out_release_gpio; - - set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING); + return ret; ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro"); - if (ret) - goto out_release_gpio; + if (ret) { + free_irq(IRQ_GPIOC(29), data); + return ret; + } - mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN); gpio_direction_input(GPIO_PORTC + 28); return 0; - -out_release_gpio: - mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins, - ARRAY_SIZE(pcm970_sdhc2_pins)); - return ret; } static void pcm970_sdhc2_exit(struct device *dev, void *data) { free_irq(IRQ_GPIOC(29), data); gpio_free(GPIO_PORTC + 28); - mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins, - ARRAY_SIZE(pcm970_sdhc2_pins)); } static struct imxmmc_platform_data sdhc_pdata = { @@ -89,29 +125,6 @@ static struct imxmmc_platform_data sdhc_ .exit = pcm970_sdhc2_exit, }; -static int mxc_fb_pins[] = { - PA5_PF_LSCLK, PA6_PF_LD0, PA7_PF_LD1, PA8_PF_LD2, - PA9_PF_LD3, PA10_PF_LD4, PA11_PF_LD5, PA12_PF_LD6, - PA13_PF_LD7, PA14_PF_LD8, PA15_PF_LD9, PA16_PF_LD10, - PA17_PF_LD11, PA18_PF_LD12, PA19_PF_LD13, PA20_PF_LD14, - PA21_PF_LD15, PA22_PF_LD16, PA23_PF_LD17, PA24_PF_REV, - PA25_PF_CLS, PA26_PF_PS, PA27_PF_SPL_SPR, PA28_PF_HSYNC, - PA29_PF_VSYNC, PA30_PF_CONTRAST, PA31_PF_OE_ACD -}; - -static int pcm038_fb_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_fb_pins, - ARRAY_SIZE(mxc_fb_pins), "FB"); -} - -static int pcm038_fb_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins)); - - return 0; -} - /* * Connected is a portrait Sharp-QVGA display * of type: LQ035Q7DH06 @@ -144,9 +157,6 @@ static struct imx_fb_platform_data pcm03 .pwmr = 0x00A903FF, .lscr1 = 0x00120300, .dmacr = 0x00020010, - - .init = pcm038_fb_init, - .exit = pcm038_fb_exit, }; /* @@ -157,6 +167,9 @@ static struct imx_fb_platform_data pcm03 */ void __init pcm970_baseboard_init(void) { + mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins), + "PCM970"); + mxc_register_device(&mxc_fb_device, &pcm038_fb_data); mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/clock.c linux-2.6.30-rc4-git/arch/arm/mach-mx3/clock.c --- linux-2.6.30-rc4/arch/arm/mach-mx3/clock.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/clock.c 2009-05-13 09:46:19.000000000 +0200 @@ -566,8 +566,6 @@ int __init mx31_clocks_init(unsigned lon u32 reg; int i; - mxc_set_cpu_type(MXC_CPU_MX31); - ckih_rate = fref; for (i = 0; i < ARRAY_SIZE(lookups); i++) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/clock-imx35.c linux-2.6.30-rc4-git/arch/arm/mach-mx3/clock-imx35.c --- linux-2.6.30-rc4/arch/arm/mach-mx3/clock-imx35.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/clock-imx35.c 2009-05-13 09:46:19.000000000 +0200 @@ -147,34 +147,16 @@ static struct arm_ahb_div clk_consumer[] { .arm = 0, .ahb = 0, .sel = 0}, }; -static struct arm_ahb_div clk_automotive[] = { - { .arm = 1, .ahb = 3, .sel = 0}, - { .arm = 1, .ahb = 2, .sel = 1}, - { .arm = 2, .ahb = 1, .sel = 1}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 1, .ahb = 6, .sel = 0}, - { .arm = 1, .ahb = 4, .sel = 1}, - { .arm = 2, .ahb = 2, .sel = 1}, - { .arm = 0, .ahb = 0, .sel = 0}, -}; - static unsigned long get_rate_arm(void) { unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); struct arm_ahb_div *aad; unsigned long fref = get_rate_mpll(); - if (pdr0 & 1) { - /* consumer path */ - aad = &clk_consumer[(pdr0 >> 16) & 0xf]; - if (aad->sel) - fref = fref * 2 / 3; - } else { - /* auto path */ - aad = &clk_automotive[(pdr0 >> 9) & 0x7]; - if (aad->sel) - fref = fref * 3 / 4; - } + aad = &clk_consumer[(pdr0 >> 16) & 0xf]; + if (aad->sel) + fref = fref * 2 / 3; + return fref / aad->arm; } @@ -184,12 +166,7 @@ static unsigned long get_rate_ahb(struct struct arm_ahb_div *aad; unsigned long fref = get_rate_mpll(); - if (pdr0 & 1) - /* consumer path */ - aad = &clk_consumer[(pdr0 >> 16) & 0xf]; - else - /* auto path */ - aad = &clk_automotive[(pdr0 >> 9) & 0x7]; + aad = &clk_consumer[(pdr0 >> 16) & 0xf]; return fref / aad->ahb; } @@ -430,7 +407,8 @@ static struct clk_lookup lookups[] __ini _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk) _REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk) - _REGISTER_CLOCK(NULL, "ipu", ipu_clk) + _REGISTER_CLOCK("ipu-core", NULL, ipu_clk) + _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk) _REGISTER_CLOCK(NULL, "kpp", kpp_clk) _REGISTER_CLOCK(NULL, "mlb", mlb_clk) _REGISTER_CLOCK(NULL, "mshc", mshc_clk) @@ -462,8 +440,6 @@ int __init mx35_clocks_init() int i; unsigned int ll = 0; - mxc_set_cpu_type(MXC_CPU_MX35); - #ifdef CONFIG_DEBUG_LL_CONSOLE ll = (3 << 16); #endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/devices.c linux-2.6.30-rc4-git/arch/arm/mach-mx3/devices.c --- linux-2.6.30-rc4/arch/arm/mach-mx3/devices.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/devices.c 2009-05-13 09:46:19.000000000 +0200 @@ -17,13 +17,17 @@ * Boston, MA 02110-1301, USA. */ +#include #include #include #include #include +#include #include #include +#include #include +#include #include "devices.h" @@ -283,6 +287,21 @@ struct platform_device mxcsdhc_device1 = .num_resources = ARRAY_SIZE(mxcsdhc1_resources), .resource = mxcsdhc1_resources, }; + +static struct resource rnga_resources[] = { + { + .start = RNGA_BASE_ADDR, + .end = RNGA_BASE_ADDR + 0x28, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device mxc_rnga_device = { + .name = "mxc_rnga", + .id = -1, + .num_resources = 1, + .resource = rnga_resources, +}; #endif /* CONFIG_ARCH_MX31 */ /* i.MX31 Image Processing Unit */ @@ -329,10 +348,54 @@ struct platform_device mx3_fb = { .num_resources = ARRAY_SIZE(fb_resources), .resource = fb_resources, .dev = { - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, }; +static struct resource camera_resources[] = { + { + .start = IPU_CTRL_BASE_ADDR + 0x60, + .end = IPU_CTRL_BASE_ADDR + 0x87, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device mx3_camera = { + .name = "mx3-camera", + .id = 0, + .num_resources = ARRAY_SIZE(camera_resources), + .resource = camera_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource otg_resources[] = { + { + .start = OTG_BASE_ADDR, + .end = OTG_BASE_ADDR + 0x1ff, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_USB3, + .end = MXC_INT_USB3, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 otg_dmamask = DMA_BIT_MASK(32); + +/* OTG gadget device */ +struct platform_device mxc_otg_udc_device = { + .name = "fsl-usb2-udc", + .id = -1, + .dev = { + .dma_mask = &otg_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = otg_resources, + .num_resources = ARRAY_SIZE(otg_resources), +}; + #ifdef CONFIG_ARCH_MX35 static struct resource mxc_fec_resources[] = { { @@ -359,6 +422,7 @@ static int mx3_devices_init(void) if (cpu_is_mx31()) { mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR; mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff; + mxc_register_device(&mxc_rnga_device, NULL); } if (cpu_is_mx35()) { mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/devices.h linux-2.6.30-rc4-git/arch/arm/mach-mx3/devices.h --- linux-2.6.30-rc4/arch/arm/mach-mx3/devices.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/devices.h 2009-05-13 09:46:19.000000000 +0200 @@ -11,6 +11,8 @@ extern struct platform_device mxc_i2c_de extern struct platform_device mxc_i2c_device2; extern struct platform_device mx3_ipu; extern struct platform_device mx3_fb; +extern struct platform_device mx3_camera; extern struct platform_device mxc_fec_device; extern struct platform_device mxcsdhc_device0; extern struct platform_device mxcsdhc_device1; +extern struct platform_device mxc_otg_udc_device; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/iomux.c linux-2.6.30-rc4-git/arch/arm/mach-mx3/iomux.c --- linux-2.6.30-rc4/arch/arm/mach-mx3/iomux.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/iomux.c 2009-05-13 09:46:19.000000000 +0200 @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include @@ -94,15 +93,13 @@ void mxc_iomux_set_pad(enum iomux_pins p EXPORT_SYMBOL(mxc_iomux_set_pad); /* - * setups a single pin: + * allocs a single pin: * - reserves the pin so that it is not claimed by another driver * - setups the iomux according to the configuration - * - if the pin is configured as a GPIO, we claim it through kernel gpiolib */ -int mxc_iomux_setup_pin(const unsigned int pin, const char *label) +int mxc_iomux_alloc_pin(const unsigned int pin, const char *label) { unsigned pad = pin & IOMUX_PADNUM_MASK; - unsigned gpio; if (pad >= (PIN_MAX + 1)) { printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n", @@ -113,19 +110,13 @@ int mxc_iomux_setup_pin(const unsigned i if (test_and_set_bit(pad, mxc_pin_alloc_map)) { printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n", pad, label ? label : "?"); - return -EINVAL; + return -EBUSY; } mxc_iomux_mode(pin); - /* if we have a gpio, we can allocate it */ - gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT; - if (gpio < (GPIO_PORT_MAX + 1) * 32) - if (gpio_request(gpio, label)) - return -EINVAL; - return 0; } -EXPORT_SYMBOL(mxc_iomux_setup_pin); +EXPORT_SYMBOL(mxc_iomux_alloc_pin); int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, const char *label) @@ -135,7 +126,8 @@ int mxc_iomux_setup_multiple_pins(unsign int ret = -EINVAL; for (i = 0; i < count; i++) { - if (mxc_iomux_setup_pin(*p, label)) + ret = mxc_iomux_alloc_pin(*p, label); + if (ret) goto setup_error; p++; } @@ -150,14 +142,9 @@ EXPORT_SYMBOL(mxc_iomux_setup_multiple_p void mxc_iomux_release_pin(const unsigned int pin) { unsigned pad = pin & IOMUX_PADNUM_MASK; - unsigned gpio; if (pad < (PIN_MAX + 1)) clear_bit(pad, mxc_pin_alloc_map); - - gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT; - if (gpio < (GPIO_PORT_MAX + 1) * 32) - gpio_free(gpio); } EXPORT_SYMBOL(mxc_iomux_release_pin); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/Kconfig linux-2.6.30-rc4-git/arch/arm/mach-mx3/Kconfig --- linux-2.6.30-rc4/arch/arm/mach-mx3/Kconfig 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/Kconfig 2009-05-13 09:46:19.000000000 +0200 @@ -1,10 +1,12 @@ if ARCH_MX3 config ARCH_MX31 + select ARCH_HAS_RNGA bool config ARCH_MX35 bool + select ARCH_MXC_IOMUX_V3 comment "MX3 platforms:" @@ -66,4 +68,11 @@ config MACH_QONG Include support for Dave/DENX QongEVB-LITE platform. This includes specific configurations for the board and its peripherals. +config MACH_PCM043 + bool "Support Phytec pcm043 (i.MX35) platforms" + select ARCH_MX35 + help + Include support for Phytec pcm043 platform. This includes + specific configurations for the board and its peripherals. + endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/Makefile linux-2.6.30-rc4-git/arch/arm/mach-mx3/Makefile --- linux-2.6.30-rc4/arch/arm/mach-mx3/Makefile 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/Makefile 2009-05-13 09:46:19.000000000 +0200 @@ -14,3 +14,4 @@ obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \ mx31moboard-marxbot.o obj-$(CONFIG_MACH_QONG) += qong.o +obj-$(CONFIG_MACH_PCM043) += pcm043.o diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/mm.c linux-2.6.30-rc4-git/arch/arm/mach-mx3/mm.c --- linux-2.6.30-rc4/arch/arm/mach-mx3/mm.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/mm.c 2009-05-13 09:46:19.000000000 +0200 @@ -72,8 +72,17 @@ static struct map_desc mxc_io_desc[] __i * system startup to create static physical to virtual memory mappings * for the IO modules. */ -void __init mxc_map_io(void) +void __init mx31_map_io(void) { + mxc_set_cpu_type(MXC_CPU_MX31); + + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} + +void __init mx35_map_io(void) +{ + mxc_set_cpu_type(MXC_CPU_MX35); + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/mx31ads.c linux-2.6.30-rc4-git/arch/arm/mach-mx3/mx31ads.c --- linux-2.6.30-rc4/arch/arm/mach-mx3/mx31ads.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/mx31ads.c 2009-05-13 09:46:19.000000000 +0200 @@ -187,7 +187,7 @@ static void __init mx31ads_init_expio(vo /* * Configure INT line as GPIO input */ - mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); + mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); /* disable the interrupt and clear the status */ __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); @@ -511,7 +511,7 @@ static struct map_desc mx31ads_io_desc[] */ static void __init mx31ads_map_io(void) { - mxc_map_io(); + mx31_map_io(); iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc)); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/mx31lite.c linux-2.6.30-rc4-git/arch/arm/mach-mx3/mx31lite.c --- linux-2.6.30-rc4/arch/arm/mach-mx3/mx31lite.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/mx31lite.c 2009-05-13 09:46:19.000000000 +0200 @@ -22,6 +22,9 @@ #include #include #include +#include +#include +#include #include #include @@ -32,11 +35,58 @@ #include #include #include +#include +#include +#include +#include "devices.h" /* * This file contains the board-specific initialization routines. */ +static unsigned int mx31lite_pins[] = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* LAN9117 IRQ pin */ + IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT, +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .start = CS4_BASE_ADDR, + .end = CS4_BASE_ADDR + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IOMUX_TO_IRQ(MX31_PIN_SFS6), + .end = IOMUX_TO_IRQ(MX31_PIN_SFS6), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + /* * This structure defines the MX31 memory map. */ @@ -59,7 +109,7 @@ static struct map_desc mx31lite_io_desc[ */ void __init mx31lite_map_io(void) { - mxc_map_io(); + mx31_map_io(); iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc)); } @@ -68,6 +118,21 @@ void __init mx31lite_map_io(void) */ static void __init mxc_board_init(void) { + int ret; + + mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins), + "mx31lite"); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + + /* SMSC9117 IRQ pin */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); + if (ret) + pr_warning("could not get LAN irq gpio\n"); + else { + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6)); + platform_device_register(&smsc911x_device); + } } static void __init mx31lite_timer_init(void) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/mx31moboard.c linux-2.6.30-rc4-git/arch/arm/mach-mx3/mx31moboard.c --- linux-2.6.30-rc4/arch/arm/mach-mx3/mx31moboard.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/mx31moboard.c 2009-05-13 09:46:19.000000000 +0200 @@ -16,26 +16,47 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include +#include #include - -#include +#include +#include #include #include -#include +#include +#include -#include #include #include #include #include +#include #include +#include #include #include -#include +#include +#include #include "devices.h" +static unsigned int moboard_pins[] = { + /* UART0 */ + MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, + /* UART4 */ + MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5, + MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5, + /* I2C0 */ + MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL, + /* I2C1 */ + MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL, + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD, + MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27, +}; + static struct physmap_flash_data mx31moboard_flash_data = { .width = 2, }; @@ -60,17 +81,69 @@ static struct imxuart_platform_data uart .flags = IMXUART_HAVE_RTSCTS, }; -static struct platform_device *devices[] __initdata = { - &mx31moboard_flash, +static struct imxi2c_platform_data moboard_i2c0_pdata = { + .bitrate = 400000, }; -static int mxc_uart0_pins[] = { - MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, +static struct imxi2c_platform_data moboard_i2c1_pdata = { + .bitrate = 100000, }; -static int mxc_uart4_pins[] = { - MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5, - MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5, + +#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0) +#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1) + +static int moboard_sdhc1_get_ro(struct device *dev) +{ + return gpio_get_value(SDHC1_WP); +} + +static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC1_CD, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC1_CD); + + ret = gpio_request(SDHC1_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC1_WP); + + ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "sdhc1-card-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(SDHC1_WP); +err_gpio_free: + gpio_free(SDHC1_CD); + + return ret; +} + +static void moboard_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC1_CD), data); + gpio_free(SDHC1_WP); + gpio_free(SDHC1_CD); +} + +static struct imxmmc_platform_data sdhc1_pdata = { + .get_ro = moboard_sdhc1_get_ro, + .init = moboard_sdhc1_init, + .exit = moboard_sdhc1_exit, +}; + +static struct platform_device *devices[] __initdata = { + &mx31moboard_flash, }; static int mx31moboard_baseboard; @@ -81,14 +154,19 @@ core_param(mx31moboard_baseboard, mx31mo */ static void __init mxc_board_init(void) { + mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), + "moboard"); + platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0"); mxc_register_device(&mxc_uart_device0, &uart_pdata); - - mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4"); mxc_register_device(&mxc_uart_device4, &uart_pdata); + mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata); + mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata); + + mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata); + switch (mx31moboard_baseboard) { case MX31NOBOARD: break; @@ -99,7 +177,8 @@ static void __init mxc_board_init(void) mx31moboard_marxbot_init(); break; default: - printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard); + printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", + mx31moboard_baseboard); } } @@ -117,7 +196,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &mx31moboard_timer, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/mx31moboard-devboard.c linux-2.6.30-rc4-git/arch/arm/mach-mx3/mx31moboard-devboard.c --- linux-2.6.30-rc4/arch/arm/mach-mx3/mx31moboard-devboard.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/mx31moboard-devboard.c 2009-05-13 09:46:19.000000000 +0200 @@ -16,33 +16,142 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include +#include +#include #include - +#include #include +#include -#include #include #include #include +#include +#include #include "devices.h" +static unsigned int devboard_pins[] = { + /* UART1 */ + MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, + /* SDHC2 */ + MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, + MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, + MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, + MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, + /* USB OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, + MX31_PIN_USB_OC__GPIO1_30, +}; + static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static int mxc_uart1_pins[] = { - MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, +#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) +#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) + +static int devboard_sdhc2_get_ro(struct device *dev) +{ + return gpio_get_value(SDHC2_WP); +} + +static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC2_CD, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC2_CD); + + ret = gpio_request(SDHC2_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC2_WP); + + ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "sdhc2-card-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(SDHC2_WP); +err_gpio_free: + gpio_free(SDHC2_CD); + + return ret; +} + +static void devboard_sdhc2_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC2_CD), data); + gpio_free(SDHC2_WP); + gpio_free(SDHC2_CD); +} + +static struct imxmmc_platform_data sdhc2_pdata = { + .get_ro = devboard_sdhc2_get_ro, + .init = devboard_sdhc2_init, + .exit = devboard_sdhc2_exit, +}; + +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, }; +#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST) +#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) + +static void devboard_usbotg_init(void) +{ + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG); + + gpio_request(OTG_EN_B, "usb-udc-en"); + gpio_direction_output(OTG_EN_B, 0); +} + /* * system init for baseboard usage. Will be called by mx31moboard init. */ void __init mx31moboard_devboard_init(void) { printk(KERN_INFO "Initializing mx31devboard peripherals\n"); - mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1"); + + mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins), + "devboard"); + mxc_register_device(&mxc_uart_device1, &uart_pdata); + + mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); + + devboard_usbotg_init(); + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/mx31moboard-marxbot.c linux-2.6.30-rc4-git/arch/arm/mach-mx3/mx31moboard-marxbot.c --- linux-2.6.30-rc4/arch/arm/mach-mx3/mx31moboard-marxbot.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/mx31moboard-marxbot.c 2009-05-13 09:46:19.000000000 +0200 @@ -16,22 +16,144 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include +#include +#include #include - +#include #include +#include -#include #include +#include #include #include +#include #include "devices.h" +static unsigned int marxbot_pins[] = { + /* SDHC2 */ + MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, + MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, + MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, + MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, + /* CSI */ + MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5, + MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7, + MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9, + MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11, + MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13, + MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15, + MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK, + MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC, + MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1, + MX31_PIN_TXD2__GPIO1_28, + /* USB OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, + MX31_PIN_USB_OC__GPIO1_30, +}; + +#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) +#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) + +static int marxbot_sdhc2_get_ro(struct device *dev) +{ + return gpio_get_value(SDHC2_WP); +} + +static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC2_CD, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC2_CD); + + ret = gpio_request(SDHC2_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC2_WP); + + ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "sdhc2-card-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(SDHC2_WP); +err_gpio_free: + gpio_free(SDHC2_CD); + + return ret; +} + +static void marxbot_sdhc2_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC2_CD), data); + gpio_free(SDHC2_WP); + gpio_free(SDHC2_CD); +} + +static struct imxmmc_platform_data sdhc2_pdata = { + .get_ro = marxbot_sdhc2_get_ro, + .init = marxbot_sdhc2_init, + .exit = marxbot_sdhc2_exit, +}; + +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST) +#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) + +static void marxbot_usbotg_init(void) +{ + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG); + + gpio_request(OTG_EN_B, "usb-udc-en"); + gpio_direction_output(OTG_EN_B, 0); +} + /* * system init for baseboard usage. Will be called by mx31moboard init. */ void __init mx31moboard_marxbot_init(void) { printk(KERN_INFO "Initializing mx31marxbot peripherals\n"); + + mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins), + "marxbot"); + + mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); + + marxbot_usbotg_init(); + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/mx31pdk.c linux-2.6.30-rc4-git/arch/arm/mach-mx3/mx31pdk.c --- linux-2.6.30-rc4/arch/arm/mach-mx3/mx31pdk.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/mx31pdk.c 2009-05-13 09:46:19.000000000 +0200 @@ -84,7 +84,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31P .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &mx31pdk_timer, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/pcm037.c linux-2.6.30-rc4-git/arch/arm/mach-mx3/pcm037.c --- linux-2.6.30-rc4/arch/arm/mach-mx3/pcm037.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/pcm037.c 2009-05-13 09:46:19.000000000 +0200 @@ -28,6 +28,10 @@ #include #include #include +#include +#include +#include +#include #include #include @@ -37,7 +41,9 @@ #include #include #include +#include #include +#include #include #include #ifdef CONFIG_I2C_IMX @@ -46,6 +52,76 @@ #include "devices.h" +static unsigned int pcm037_pins[] = { + /* I2C */ + MX31_PIN_CSPI2_MOSI__SCL, + MX31_PIN_CSPI2_MISO__SDA, + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */ + IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */ + /* SPI1 */ + MX31_PIN_CSPI1_MOSI__MOSI, + MX31_PIN_CSPI1_MISO__MISO, + MX31_PIN_CSPI1_SCLK__SCLK, + MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI1_SS0__SS0, + MX31_PIN_CSPI1_SS1__SS1, + MX31_PIN_CSPI1_SS2__SS2, + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* UART2 */ + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + /* UART3 */ + MX31_PIN_CSPI3_MOSI__RXD3, + MX31_PIN_CSPI3_MISO__TXD3, + MX31_PIN_CSPI3_SCLK__RTS3, + MX31_PIN_CSPI3_SPI_RDY__CTS3, + /* LAN9217 irq pin */ + IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), + /* Onewire */ + MX31_PIN_BATT_LINE__OWIRE, + /* Framebuffer */ + MX31_PIN_LD0__LD0, + MX31_PIN_LD1__LD1, + MX31_PIN_LD2__LD2, + MX31_PIN_LD3__LD3, + MX31_PIN_LD4__LD4, + MX31_PIN_LD5__LD5, + MX31_PIN_LD6__LD6, + MX31_PIN_LD7__LD7, + MX31_PIN_LD8__LD8, + MX31_PIN_LD9__LD9, + MX31_PIN_LD10__LD10, + MX31_PIN_LD11__LD11, + MX31_PIN_LD12__LD12, + MX31_PIN_LD13__LD13, + MX31_PIN_LD14__LD14, + MX31_PIN_LD15__LD15, + MX31_PIN_LD16__LD16, + MX31_PIN_LD17__LD17, + MX31_PIN_VSYNC3__VSYNC3, + MX31_PIN_HSYNC__HSYNC, + MX31_PIN_FPSHIFT__FPSHIFT, + MX31_PIN_DRDY0__DRDY0, + MX31_PIN_D3_REV__D3_REV, + MX31_PIN_CONTRAST__CONTRAST, + MX31_PIN_D3_SPL__D3_SPL, + MX31_PIN_D3_CLS__D3_CLS, + MX31_PIN_LCS0__GPI03_23, +}; + static struct physmap_flash_data pcm037_flash_data = { .width = 2, }; @@ -56,6 +132,54 @@ static struct resource pcm037_flash_reso .flags = IORESOURCE_MEM, }; +static int usbotg_pins[] = { + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, + MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, + MX31_PIN_USBOTG_STP__USBOTG_STP, +}; + +/* USB OTG HS port */ +static int __init gpio_usbotg_hs_activate(void) +{ + int ret = mxc_iomux_setup_multiple_pins(usbotg_pins, + ARRAY_SIZE(usbotg_pins), "usbotg"); + + if (ret < 0) { + printk(KERN_ERR "Cannot set up OTG pins\n"); + return ret; + } + + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + + return 0; +} + +/* OTG config */ +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + static struct platform_device pcm037_flash = { .name = "physmap-flash", .id = 0, @@ -127,26 +251,8 @@ static struct mxc_nand_platform_data pcm }; #ifdef CONFIG_I2C_IMX -static int i2c_1_pins[] = { - MX31_PIN_CSPI2_MOSI__SCL, - MX31_PIN_CSPI2_MISO__SDA, -}; - -static int pcm037_i2c_1_init(struct device *dev) -{ - return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins), - "i2c-1"); -} - -static void pcm037_i2c_1_exit(struct device *dev) -{ - mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins)); -} - static struct imxi2c_platform_data pcm037_i2c_1_data = { .bitrate = 100000, - .init = pcm037_i2c_1_init, - .exit = pcm037_i2c_1_exit, }; static struct at24_platform_data board_eeprom = { @@ -166,48 +272,119 @@ static struct i2c_board_info pcm037_i2c_ }; #endif -static int sdhc1_pins[] = { - MX31_PIN_SD1_DATA3__SD1_DATA3, - MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA1__SD1_DATA1, - MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_CLK__SD1_CLK, - MX31_PIN_SD1_CMD__SD1_CMD, -}; +/* Not connected by default */ +#ifdef PCM970_SDHC_RW_SWITCH +static int pcm970_sdhc1_get_ro(struct device *dev) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6)); +} +#endif -static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data) +#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6) +#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6) + +static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) { - return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins), - "sdhc-1"); + int ret; + + ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC1_GPIO_DET); + +#ifdef PCM970_SDHC_RW_SWITCH + ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC1_GPIO_WP); +#endif + + ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "sdhc-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: +#ifdef PCM970_SDHC_RW_SWITCH + gpio_free(SDHC1_GPIO_WP); +err_gpio_free: +#endif + gpio_free(SDHC1_GPIO_DET); + + return ret; } static void pcm970_sdhc1_exit(struct device *dev, void *data) { - mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins)); + free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data); + gpio_free(SDHC1_GPIO_DET); + gpio_free(SDHC1_GPIO_WP); } -/* No card and rw detection at the moment */ static struct imxmmc_platform_data sdhc_pdata = { +#ifdef PCM970_SDHC_RW_SWITCH + .get_ro = pcm970_sdhc1_get_ro, +#endif .init = pcm970_sdhc1_init, .exit = pcm970_sdhc1_exit, }; static struct platform_device *devices[] __initdata = { &pcm037_flash, - &pcm037_eth, &pcm037_sram_device, }; -static int uart0_pins[] = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1 +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, }; -static int uart2_pins[] = { - MX31_PIN_CSPI3_MOSI__RXD3, - MX31_PIN_CSPI3_MISO__TXD3 +static const struct fb_videomode fb_modedb[] = { + { + /* 240x320 @ 60 Hz Sharp */ + .name = "Sharp-LQ035Q7DH06-QVGA", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | + FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 240x320 @ 60 Hz */ + .name = "TX090", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 38255, + .left_margin = 144, + .right_margin = 0, + .upper_margin = 7, + .lower_margin = 40, + .hsync_len = 96, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .dma_dev = &mx3_ipu.dev, + .name = "Sharp-LQ035Q7DH06-QVGA", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), }; /* @@ -215,21 +392,28 @@ static int uart2_pins[] = { */ static void __init mxc_board_init(void) { + int ret; + + mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), + "pcm037"); + platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0"); mxc_register_device(&mxc_uart_device0, &uart_pdata); - - mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2"); + mxc_register_device(&mxc_uart_device1, &uart_pdata); mxc_register_device(&mxc_uart_device2, &uart_pdata); - mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire"); mxc_register_device(&mxc_w1_master_device, NULL); /* LAN9217 IRQ pin */ - if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), - "pcm037-eth")) + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); + if (ret) + pr_warning("could not get LAN irq gpio\n"); + else { gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + platform_device_register(&pcm037_eth); + } + #ifdef CONFIG_I2C_IMX i2c_register_board_info(1, pcm037_i2c_devices, @@ -239,6 +423,10 @@ static void __init mxc_board_init(void) #endif mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + mxc_register_device(&mx3_fb, &mx3fb_pdata); + if (!gpio_usbotg_hs_activate()) + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } static void __init pcm037_timer_init(void) @@ -255,7 +443,7 @@ MACHINE_START(PCM037, "Phytec Phycore pc .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &pcm037_timer, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/pcm043.c linux-2.6.30-rc4-git/arch/arm/mach-mx3/pcm043.c --- linux-2.6.30-rc4/arch/arm/mach-mx3/pcm043.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/pcm043.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,252 @@ +/* + * Copyright (C) 2009 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE +#include +#endif +#include +#include +#include + +#include "devices.h" + +static const struct fb_videomode fb_modedb[] = { + { + /* 240x320 @ 60 Hz */ + .name = "Sharp-LQ035Q7", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 240x320 @ 60 Hz */ + .name = "TX090", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 38255, + .left_margin = 144, + .right_margin = 0, + .upper_margin = 7, + .lower_margin = 40, + .hsync_len = 96, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .dma_dev = &mx3_ipu.dev, + .name = "Sharp-LQ035Q7", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +static struct physmap_flash_data pcm043_flash_data = { + .width = 2, +}; + +static struct resource pcm043_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pcm043_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &pcm043_flash_data, + }, + .resource = &pcm043_flash_resource, + .num_resources = 1, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE +static struct imxi2c_platform_data pcm043_i2c_1_data = { + .bitrate = 50000, +}; + +static struct at24_platform_data board_eeprom = { + .byte_len = 4096, + .page_size = 32, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info pcm043_i2c_devices[] = { + { + I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ + .platform_data = &board_eeprom, + }, { + I2C_BOARD_INFO("rtc-pcf8563", 0x51), + .type = "pcf8563", + } +}; +#endif + +static struct platform_device *devices[] __initdata = { + &pcm043_flash, + &mxc_fec_device, +}; + +static struct pad_desc pcm043_pads[] = { + /* UART1 */ + MX35_PAD_CTS1__UART1_CTS, + MX35_PAD_RTS1__UART1_RTS, + MX35_PAD_TXD1__UART1_TXD_MUX, + MX35_PAD_RXD1__UART1_RXD_MUX, + /* UART2 */ + MX35_PAD_CTS2__UART2_CTS, + MX35_PAD_RTS2__UART2_RTS, + MX35_PAD_TXD2__UART2_TXD_MUX, + MX35_PAD_RXD2__UART2_RXD_MUX, + /* FEC */ + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + /* I2C1 */ + MX35_PAD_I2C1_CLK__I2C1_SCL, + MX35_PAD_I2C1_DAT__I2C1_SDA, + /* Display */ + MX35_PAD_LD0__IPU_DISPB_DAT_0, + MX35_PAD_LD1__IPU_DISPB_DAT_1, + MX35_PAD_LD2__IPU_DISPB_DAT_2, + MX35_PAD_LD3__IPU_DISPB_DAT_3, + MX35_PAD_LD4__IPU_DISPB_DAT_4, + MX35_PAD_LD5__IPU_DISPB_DAT_5, + MX35_PAD_LD6__IPU_DISPB_DAT_6, + MX35_PAD_LD7__IPU_DISPB_DAT_7, + MX35_PAD_LD8__IPU_DISPB_DAT_8, + MX35_PAD_LD9__IPU_DISPB_DAT_9, + MX35_PAD_LD10__IPU_DISPB_DAT_10, + MX35_PAD_LD11__IPU_DISPB_DAT_11, + MX35_PAD_LD12__IPU_DISPB_DAT_12, + MX35_PAD_LD13__IPU_DISPB_DAT_13, + MX35_PAD_LD14__IPU_DISPB_DAT_14, + MX35_PAD_LD15__IPU_DISPB_DAT_15, + MX35_PAD_LD16__IPU_DISPB_DAT_16, + MX35_PAD_LD17__IPU_DISPB_DAT_17, + MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, + MX35_PAD_CONTRAST__IPU_DISPB_CONTR, + MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, + MX35_PAD_D3_REV__IPU_DISPB_D3_REV, + MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, + MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL +}; + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + + mxc_register_device(&mxc_uart_device1, &uart_pdata); + +#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE + i2c_register_board_info(0, pcm043_i2c_devices, + ARRAY_SIZE(pcm043_i2c_devices)); + + mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data); +#endif + + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + mxc_register_device(&mx3_fb, &mx3fb_pdata); +} + +static void __init pcm043_timer_init(void) +{ + mx35_clocks_init(); +} + +struct sys_timer pcm043_timer = { + .init = pcm043_timer_init, +}; + +MACHINE_START(PCM043, "Phytec Phycore pcm043") + /* Maintainer: Pengutronix */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx35_map_io, + .init_irq = mxc_init_irq, + .init_machine = mxc_board_init, + .timer = &pcm043_timer, +MACHINE_END + diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-mx3/qong.c linux-2.6.30-rc4-git/arch/arm/mach-mx3/qong.c --- linux-2.6.30-rc4/arch/arm/mach-mx3/qong.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-mx3/qong.c 2009-05-13 09:46:19.000000000 +0200 @@ -279,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-L .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &qong_timer, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-omap1/board-h2-mmc.c linux-2.6.30-rc4-git/arch/arm/mach-omap1/board-h2-mmc.c --- linux-2.6.30-rc4/arch/arm/mach-omap1/board-h2-mmc.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-omap1/board-h2-mmc.c 2009-05-13 09:46:19.000000000 +0200 @@ -26,19 +26,13 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } static int mmc_late_init(struct device *dev) { - int ret; - - ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); + int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); if (ret < 0) return ret; @@ -47,7 +41,7 @@ static int mmc_late_init(struct device * return ret; } -static void mmc_shutdown(struct device *dev) +static void mmc_cleanup(struct device *dev) { gpio_free(H2_TPS_GPIO_MMC_PWR_EN); } @@ -60,7 +54,7 @@ static void mmc_shutdown(struct device * static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 1, .init = mmc_late_init, - .shutdown = mmc_shutdown, + .cleanup = mmc_cleanup, .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-omap1/board-h3.c linux-2.6.30-rc4-git/arch/arm/mach-omap1/board-h3.c --- linux-2.6.30-rc4/arch/arm/mach-omap1/board-h3.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-omap1/board-h3.c 2009-05-13 09:46:19.000000000 +0200 @@ -39,12 +39,10 @@ #include #include -#include #include #include #include #include -#include #include #include #include @@ -276,104 +274,6 @@ static struct platform_device h3_kp_devi .resource = h3_kp_resources, }; - -/* Select between the IrDA and aGPS module - */ -static int h3_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x26))) { - printk(KERN_ERR "Error reading from I/O EXPANDER \n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDA */ - if ((err = write_gpio_expa(expa | 0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x27)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x03; - - if (mode & IR_SIRMODE) { - expa |= 0x01; - } else { /* MIR/FIR */ - expa |= 0x03; - } - - if ((err = write_gpio_expa(expa, 0x27)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h3_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h3_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h3_transceiver_mode, - .select_irda = h3_select_irda, - .rx_channel = OMAP_DMA_UART3_RX, - .tx_channel = OMAP_DMA_UART3_TX, - .dest_start = UART3_THR, - .src_start = UART3_RHR, - .tx_trigger = 0, - .rx_trigger = 0, -}; - -static struct resource h3_irda_resources[] = { - [0] = { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 irda_dmamask = 0xffffffff; - -static struct platform_device h3_irda_device = { - .name = "omapirda", - .id = 0, - .dev = { - .platform_data = &h3_irda_data, - .dma_mask = &irda_dmamask, - }, - .num_resources = ARRAY_SIZE(h3_irda_resources), - .resource = h3_irda_resources, -}; - static struct platform_device h3_lcd_device = { .name = "lcd_h3", .id = -1, @@ -395,7 +295,6 @@ static struct platform_device *devices[] &nand_device, &smc91x_device, &intlat_device, - &h3_irda_device, &h3_kp_device, &h3_lcd_device, }; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-omap1/board-h3-mmc.c linux-2.6.30-rc4-git/arch/arm/mach-omap1/board-h3-mmc.c --- linux-2.6.30-rc4/arch/arm/mach-omap1/board-h3-mmc.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-omap1/board-h3-mmc.c 2009-05-13 09:46:19.000000000 +0200 @@ -26,11 +26,7 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-omap1/board-nokia770.c linux-2.6.30-rc4-git/arch/arm/mach-omap1/board-nokia770.c --- linux-2.6.30-rc4/arch/arm/mach-omap1/board-nokia770.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-omap1/board-nokia770.c 2009-05-13 09:46:19.000000000 +0200 @@ -181,11 +181,7 @@ static struct omap_usb_config nokia770_u static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1); - else - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0); - + gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on); return 0; } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-omap1/mcbsp.c linux-2.6.30-rc4-git/arch/arm/mach-omap1/mcbsp.c --- linux-2.6.30-rc4/arch/arm/mach-omap1/mcbsp.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-omap1/mcbsp.c 2009-05-13 09:46:19.000000000 +0200 @@ -40,8 +40,8 @@ static void omap1_mcbsp_request(unsigned */ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { if (dsp_use++ == 0) { - api_clk = clk_get(NULL, "api_clk"); - dsp_clk = clk_get(NULL, "dsp_clk"); + api_clk = clk_get(NULL, "api_ck"); + dsp_clk = clk_get(NULL, "dsp_ck"); if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) { clk_enable(api_clk); clk_enable(dsp_clk); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-omap2/board-h4.c linux-2.6.30-rc4-git/arch/arm/mach-omap2/board-h4.c --- linux-2.6.30-rc4/arch/arm/mach-omap2/board-h4.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-omap2/board-h4.c 2009-05-13 09:46:19.000000000 +0200 @@ -33,10 +33,8 @@ #include #include -#include #include #include -#include #include #include #include @@ -138,98 +136,6 @@ static struct platform_device h4_flash_d .resource = &h4_flash_resource, }; -/* Select between the IrDA and aGPS module - */ -static int h4_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x21))) { - printk(KERN_ERR "Error reading from I/O expander\n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDa */ - if ((err = write_gpio_expa(expa | 0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x20)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x01; - - if (!(mode & IR_SIRMODE)) { /* MIR/FIR */ - expa |= 0x01; - } - - if ((err = write_gpio_expa(expa, 0x20)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h4_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h4_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h4_transceiver_mode, - .select_irda = h4_select_irda, - .rx_channel = OMAP24XX_DMA_UART3_RX, - .tx_channel = OMAP24XX_DMA_UART3_TX, - .dest_start = OMAP_UART3_BASE, - .src_start = OMAP_UART3_BASE, - .tx_trigger = OMAP24XX_DMA_UART3_TX, - .rx_trigger = OMAP24XX_DMA_UART3_RX, -}; - -static struct resource h4_irda_resources[] = { - [0] = { - .start = INT_24XX_UART3_IRQ, - .end = INT_24XX_UART3_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device h4_irda_device = { - .name = "omapirda", - .id = -1, - .dev = { - .platform_data = &h4_irda_data, - }, - .num_resources = 1, - .resource = h4_irda_resources, -}; - static struct omap_kp_platform_data h4_kp_data = { .rows = 6, .cols = 7, @@ -255,7 +161,6 @@ static struct platform_device h4_lcd_dev static struct platform_device *h4_devices[] __initdata = { &h4_flash_device, - &h4_irda_device, &h4_kp_device, &h4_lcd_device, }; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-omap2/board-omap3beagle.c linux-2.6.30-rc4-git/arch/arm/mach-omap2/board-omap3beagle.c --- linux-2.6.30-rc4/arch/arm/mach-omap2/board-omap3beagle.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-omap2/board-omap3beagle.c 2009-05-13 09:46:19.000000000 +0200 @@ -42,6 +42,7 @@ #include #include #include +#include #include "mmc-twl4030.h" @@ -186,6 +187,9 @@ static void __init omap3_beagle_init_irq { omap2_init_common_hw(NULL); omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif omap_gpio_init(); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-omap2/board-rx51.c linux-2.6.30-rc4-git/arch/arm/mach-omap2/board-rx51.c --- linux-2.6.30-rc4/arch/arm/mach-omap2/board-rx51.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-omap2/board-rx51.c 2009-05-13 09:46:19.000000000 +0200 @@ -15,7 +15,6 @@ #include #include #include -#include #include #include diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-omap2/clock24xx.c linux-2.6.30-rc4-git/arch/arm/mach-omap2/clock24xx.c --- linux-2.6.30-rc4/arch/arm/mach-omap2/clock24xx.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-omap2/clock24xx.c 2009-05-13 09:46:19.000000000 +0200 @@ -60,12 +60,13 @@ struct omap_clk { }, \ } -#define CK_243X (1 << 0) -#define CK_242X (1 << 1) +#define CK_243X RATE_IN_243X +#define CK_242X RATE_IN_242X static struct omap_clk omap24xx_clks[] = { /* external root sources */ CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), + CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), @@ -711,7 +712,7 @@ int __init omap2_clk_init(void) { struct prcm_config *prcm; struct omap_clk *c; - u32 clkrate, cpu_mask; + u32 clkrate; if (cpu_is_omap242x()) cpu_mask = RATE_IN_242X; @@ -720,21 +721,15 @@ int __init omap2_clk_init(void) clk_init(&omap2_clk_functions); + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + clk_init_one(c->lk.clk); + osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); propagate_rate(&osc_ck); sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); propagate_rate(&sys_ck); for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - clk_init_one(c->lk.clk); - - cpu_mask = 0; - if (cpu_is_omap2420()) - cpu_mask |= CK_242X; - if (cpu_is_omap2430()) - cpu_mask |= CK_243X; - - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) if (c->cpu & cpu_mask) { clkdev_add(&c->lk); clk_register(c->lk.clk); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-omap2/clock24xx.h linux-2.6.30-rc4-git/arch/arm/mach-omap2/clock24xx.h --- linux-2.6.30-rc4/arch/arm/mach-omap2/clock24xx.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-omap2/clock24xx.h 2009-05-13 09:46:19.000000000 +0200 @@ -625,6 +625,14 @@ static struct clk func_32k_ck = { .clkdm_name = "wkup_clkdm", }; +static struct clk secure_32k_ck = { + .name = "secure_32k_ck", + .ops = &clkops_null, + .rate = 32768, + .flags = RATE_FIXED, + .clkdm_name = "wkup_clkdm", +}; + /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", @@ -1790,7 +1798,7 @@ static struct clk gpt12_ick = { static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_omap2_dflt_wait, - .parent = &func_32k_ck, + .parent = &secure_32k_ck, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-omap2/clock34xx.h linux-2.6.30-rc4-git/arch/arm/mach-omap2/clock34xx.h --- linux-2.6.30-rc4/arch/arm/mach-omap2/clock34xx.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-omap2/clock34xx.h 2009-05-13 09:46:19.000000000 +0200 @@ -2052,7 +2052,7 @@ static struct clk dss_ick = { static struct clk cam_mclk = { .name = "cam_mclk", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &dpll4_m5x2_ck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, @@ -2063,7 +2063,7 @@ static struct clk cam_mclk = { static struct clk cam_ick = { /* Handles both L3 and L4 clocks */ .name = "cam_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), @@ -2074,7 +2074,7 @@ static struct clk cam_ick = { static struct clk csi2_96m_fck = { .name = "csi2_96m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &core_96m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), @@ -2901,7 +2901,6 @@ static struct clk sr_l4_ick = { /* SECURE_32K_FCK clocks */ -/* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-omap2/devices.c linux-2.6.30-rc4-git/arch/arm/mach-omap2/devices.c --- linux-2.6.30-rc4/arch/arm/mach-omap2/devices.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-omap2/devices.c 2009-05-13 09:46:19.000000000 +0200 @@ -25,7 +25,6 @@ #include #include #include -#include #include #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) @@ -366,38 +365,6 @@ static void omap_init_mcspi(void) static inline void omap_init_mcspi(void) {} #endif -#ifdef CONFIG_SND_OMAP24XX_EAC - -#define OMAP2_EAC_BASE 0x48090000 - -static struct resource omap2_eac_resources[] = { - { - .start = OMAP2_EAC_BASE, - .end = OMAP2_EAC_BASE + 0x109, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap2_eac_device = { - .name = "omap24xx-eac", - .id = -1, - .num_resources = ARRAY_SIZE(omap2_eac_resources), - .resource = omap2_eac_resources, - .dev = { - .platform_data = NULL, - }, -}; - -void omap_init_eac(struct eac_platform_data *pdata) -{ - omap2_eac_device.dev.platform_data = pdata; - platform_device_register(&omap2_eac_device); -} - -#else -void omap_init_eac(struct eac_platform_data *pdata) {} -#endif - #ifdef CONFIG_OMAP_SHA1_MD5 static struct resource sha1_md5_resources[] = { { diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-omap2/irq.c linux-2.6.30-rc4-git/arch/arm/mach-omap2/irq.c --- linux-2.6.30-rc4/arch/arm/mach-omap2/irq.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-omap2/irq.c 2009-05-13 09:46:19.000000000 +0200 @@ -73,9 +73,9 @@ static int omap_check_spurious(unsigned u32 sir, spurious; sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR); - spurious = sir >> 6; + spurious = sir >> 7; - if (spurious > 1) { + if (spurious) { printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush " "posted write for irq %i\n", irq, sir, previous_irq); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-omap2/timer-gp.c linux-2.6.30-rc4-git/arch/arm/mach-omap2/timer-gp.c --- linux-2.6.30-rc4/arch/arm/mach-omap2/timer-gp.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-omap2/timer-gp.c 2009-05-13 09:46:19.000000000 +0200 @@ -3,6 +3,8 @@ * * OMAP2 GP timer support. * + * Copyright (C) 2009 Nokia Corporation + * * Update to use new clocksource/clockevent layers * Author: Kevin Hilman, MontaVista Software, Inc. * Copyright (C) 2007 MontaVista Software, Inc. @@ -36,8 +38,13 @@ #include #include +/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ +#define MAX_GPTIMER_ID 12 + static struct omap_dm_timer *gptimer; static struct clock_event_device clockevent_gpt; +static u8 __initdata gptimer_id = 1; +static u8 __initdata inited; static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { @@ -95,20 +102,53 @@ static struct clock_event_device clockev .set_mode = omap2_gp_timer_set_mode, }; +/** + * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents + * @id: GPTIMER to use (1..MAX_GPTIMER_ID) + * + * Define the GPTIMER that the system should use for the tick timer. + * Meant to be called from board-*.c files in the event that GPTIMER1, the + * default, is unsuitable. Returns -EINVAL on error or 0 on success. + */ +int __init omap2_gp_clockevent_set_gptimer(u8 id) +{ + if (id < 1 || id > MAX_GPTIMER_ID) + return -EINVAL; + + BUG_ON(inited); + + gptimer_id = id; + + return 0; +} + static void __init omap2_gp_clockevent_init(void) { u32 tick_rate; + int src; - gptimer = omap_dm_timer_request_specific(1); + inited = 1; + + gptimer = omap_dm_timer_request_specific(gptimer_id); BUG_ON(gptimer == NULL); #if defined(CONFIG_OMAP_32K_TIMER) - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ); + src = OMAP_TIMER_SRC_32_KHZ; #else - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK); + src = OMAP_TIMER_SRC_SYS_CLK; + WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the " + "secure 32KiHz clock source\n"); #endif + + if (gptimer_id != 12) + WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)), + "timer-gp: omap_dm_timer_set_source() failed\n"); + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); + pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n", + gptimer_id, tick_rate); + omap2_gp_timer_irq.dev_id = (void *)gptimer; setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq); omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW); @@ -125,6 +165,8 @@ static void __init omap2_gp_clockevent_i clockevents_register_device(&clockevent_gpt); } +/* Clocksource code */ + #ifdef CONFIG_OMAP_32K_TIMER /* * When 32k-timer is enabled, don't use GPTimer for clocksource diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-omap2/usb-tusb6010.c linux-2.6.30-rc4-git/arch/arm/mach-omap2/usb-tusb6010.c --- linux-2.6.30-rc4/arch/arm/mach-omap2/usb-tusb6010.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-omap2/usb-tusb6010.c 2009-05-13 09:46:19.000000000 +0200 @@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is unsigned sysclk_ps; int status; - if (!refclk_psec) + if (!refclk_psec || sysclk_ps == 0) return -ENODEV; sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-pxa/corgi.c linux-2.6.30-rc4-git/arch/arm/mach-pxa/corgi.c --- linux-2.6.30-rc4/arch/arm/mach-pxa/corgi.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-pxa/corgi.c 2009-05-13 09:46:19.000000000 +0200 @@ -427,12 +427,22 @@ static struct pxa2xx_spi_master corgi_sp .num_chipselect = 3, }; +static void corgi_wait_for_hsync(void) +{ + while (gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data corgi_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = CORGI_GPIO_TP_INT, + .wait_for_sync = corgi_wait_for_hsync, }; static void corgi_ads7846_cs(u32 command) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-pxa/littleton.c linux-2.6.30-rc4-git/arch/arm/mach-pxa/littleton.c --- linux-2.6.30-rc4/arch/arm/mach-pxa/littleton.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-pxa/littleton.c 2009-05-13 09:46:19.000000000 +0200 @@ -334,6 +334,11 @@ static struct led_info littleton_da9034_ }, }; +static struct da9034_touch_pdata littleton_da9034_touch = { + .x_inverted = 1, + .interval_ms = 20, +}; + static struct da903x_subdev_info littleton_da9034_subdevs[] = { { .name = "da903x-led", @@ -350,6 +355,10 @@ static struct da903x_subdev_info littlet }, { .name = "da903x-backlight", .id = DA9034_ID_WLED, + }, { + .name = "da9034-touch", + .id = DA9034_ID_TOUCH, + .platform_data = &littleton_da9034_touch, }, }; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-pxa/spitz.c linux-2.6.30-rc4-git/arch/arm/mach-pxa/spitz.c --- linux-2.6.30-rc4/arch/arm/mach-pxa/spitz.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-pxa/spitz.c 2009-05-13 09:46:19.000000000 +0200 @@ -299,12 +299,22 @@ static struct pxa2xx_spi_master spitz_sp .num_chipselect = 3, }; +static void spitz_wait_for_hsync(void) +{ + while (gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data spitz_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = SPITZ_GPIO_TP_INT, + .wait_for_sync = spitz_wait_for_hsync, }; static void spitz_ads7846_cs(u32 command) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-pxa/zylonite_pxa300.c linux-2.6.30-rc4-git/arch/arm/mach-pxa/zylonite_pxa300.c --- linux-2.6.30-rc4/arch/arm/mach-pxa/zylonite_pxa300.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-pxa/zylonite_pxa300.c 2009-05-13 09:46:19.000000000 +0200 @@ -72,6 +72,7 @@ static mfp_cfg_t common_mfp_cfg[] __init GPIO25_AC97_SDATA_IN_0, GPIO27_AC97_SDATA_OUT, GPIO28_AC97_SYNC, + GPIO17_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO91_SSP3_SCLK, @@ -126,6 +127,10 @@ static mfp_cfg_t common_mfp_cfg[] __init /* Standard I2C */ GPIO21_I2C_SCL, GPIO22_I2C_SDA, + + /* GPIO */ + GPIO18_GPIO, /* GPIO Expander #0 INT_N */ + GPIO19_GPIO, /* GPIO Expander #1 INT_N */ }; static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-pxa/zylonite_pxa320.c linux-2.6.30-rc4-git/arch/arm/mach-pxa/zylonite_pxa320.c --- linux-2.6.30-rc4/arch/arm/mach-pxa/zylonite_pxa320.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-pxa/zylonite_pxa320.c 2009-05-13 09:46:19.000000000 +0200 @@ -68,6 +68,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = GPIO38_AC97_SYNC, GPIO39_AC97_BITCLK, GPIO40_AC97_nACRESET, + GPIO36_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO89_SSP3_SCLK, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mach-sa1100/lart.c linux-2.6.30-rc4-git/arch/arm/mach-sa1100/lart.c --- linux-2.6.30-rc4/arch/arm/mach-sa1100/lart.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mach-sa1100/lart.c 2009-05-13 09:46:19.000000000 +0200 @@ -9,6 +9,7 @@ #include #include #include +#include #include #include diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/Makefile linux-2.6.30-rc4-git/arch/arm/Makefile --- linux-2.6.30-rc4/arch/arm/Makefile 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/Makefile 2009-05-13 09:46:19.000000000 +0200 @@ -135,7 +135,6 @@ endif plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x machine-$(CONFIG_ARCH_VERSATILE) := versatile - machine-$(CONFIG_ARCH_IMX) := imx machine-$(CONFIG_ARCH_H720X) := h720x machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 machine-$(CONFIG_ARCH_REALVIEW) := realview diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mm/cache-v6.S linux-2.6.30-rc4-git/arch/arm/mm/cache-v6.S --- linux-2.6.30-rc4/arch/arm/mm/cache-v6.S 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mm/cache-v6.S 2009-05-13 09:46:19.000000000 +0200 @@ -20,6 +20,31 @@ #define D_CACHE_LINE_SIZE 32 #define BTB_FLUSH_SIZE 8 +#ifdef CONFIG_ARM_ERRATA_411920 +/* + * Invalidate the entire I cache (this code is a workaround for the ARM1136 + * erratum 411920 - Invalidate Instruction Cache operation can fail. This + * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore. + * + * Registers: + * r0 - set to 0 + * r1 - corrupted + */ +ENTRY(v6_icache_inval_all) + mov r0, #0 + mrs r1, cpsr + cpsid ifa @ disable interrupts + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + msr cpsr_cx, r1 @ restore interrupts + .rept 11 @ ARM Ltd recommends at least + nop @ 11 NOPs + .endr + mov pc, lr +#endif + /* * v6_flush_cache_all() * @@ -31,8 +56,12 @@ ENTRY(v6_flush_kern_cache_all) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else + b v6_icache_inval_all +#endif +#else mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate #endif mov pc, lr @@ -103,8 +132,12 @@ ENTRY(v6_coherent_user_range) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c10, 4 @ drain write buffer +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else + b v6_icache_inval_all +#endif +#else mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB #endif mov pc, lr diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mm/flush.c linux-2.6.30-rc4-git/arch/arm/mm/flush.c --- linux-2.6.30-rc4/arch/arm/mm/flush.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mm/flush.c 2009-05-13 09:46:19.000000000 +0200 @@ -18,6 +18,10 @@ #include "mm.h" +#ifdef CONFIG_ARM_ERRATA_411920 +extern void v6_icache_inval_all(void); +#endif + #ifdef CONFIG_CPU_CACHE_VIPT #define ALIAS_FLUSH_START 0xffff4000 @@ -32,10 +36,15 @@ static void flush_pfn_alias(unsigned lon asm( "mcrr p15, 0, %1, %0, c14\n" " mcr p15, 0, %2, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %2, c7, c5, 0\n" +#endif : : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } void flush_cache_mm(struct mm_struct *mm) @@ -48,11 +57,16 @@ void flush_cache_mm(struct mm_struct *mm if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } @@ -67,11 +81,16 @@ void flush_cache_range(struct vm_area_st if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/mm/proc-v7.S linux-2.6.30-rc4-git/arch/arm/mm/proc-v7.S --- linux-2.6.30-rc4/arch/arm/mm/proc-v7.S 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/mm/proc-v7.S 2009-05-13 09:46:19.000000000 +0200 @@ -96,6 +96,9 @@ ENTRY(cpu_v7_switch_mm) mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id orr r0, r0, #TTB_FLAGS +#ifdef CONFIG_ARM_ERRATA_430973 + mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB +#endif mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID isb 1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -181,6 +184,22 @@ __v7_setup: stmia r12, {r0-r5, r7, r9, r11, lr} bl v7_flush_dcache_all ldmia r12, {r0-r5, r7, r9, r11, lr} +#ifdef CONFIG_ARM_ERRATA_430973 + mrc p15, 0, r10, c1, c0, 1 @ read aux control register + orr r10, r10, #(1 << 6) @ set IBE to 1 + mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_458693 + mrc p15, 0, r10, c1, c0, 1 @ read aux control register + orr r10, r10, #(1 << 5) @ set L1NEON to 1 + orr r10, r10, #(1 << 9) @ set PLDNOP to 1 + mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_460075 + mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register + orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit + mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register +#endif mov r10, #0 #ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/dma-mx1-mx2.c linux-2.6.30-rc4-git/arch/arm/plat-mxc/dma-mx1-mx2.c --- linux-2.6.30-rc4/arch/arm/plat-mxc/dma-mx1-mx2.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/dma-mx1-mx2.c 2009-05-13 09:46:19.000000000 +0200 @@ -693,12 +693,15 @@ int imx_dma_request(int channel, const c local_irq_restore(flags); return -EBUSY; } + memset(imxdma, 0, sizeof(imxdma)); + imxdma->name = name; + local_irq_restore(flags); /* request_irq() can block */ #ifdef CONFIG_ARCH_MX2 ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA", NULL); if (ret) { - local_irq_restore(flags); + imxdma->name = NULL; printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n", MXC_INT_DMACH0 + channel, channel); return ret; @@ -708,13 +711,6 @@ int imx_dma_request(int channel, const c imxdma->watchdog.data = channel; #endif - imxdma->name = name; - imxdma->irq_handler = NULL; - imxdma->err_handler = NULL; - imxdma->data = NULL; - imxdma->sg = NULL; - - local_irq_restore(flags); return ret; } EXPORT_SYMBOL(imx_dma_request); @@ -737,10 +733,7 @@ void imx_dma_free(int channel) local_irq_save(flags); /* Disable interrupts */ - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN, - DMA_BASE + DMA_CCR(channel)); + imx_dma_disable(channel); imxdma->name = NULL; #ifdef CONFIG_ARCH_MX2 diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/gpio.c linux-2.6.30-rc4-git/arch/arm/plat-mxc/gpio.c --- linux-2.6.30-rc4/arch/arm/plat-mxc/gpio.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/gpio.c 2009-05-13 09:46:19.000000000 +0200 @@ -64,6 +64,8 @@ static void gpio_unmask_irq(u32 irq) _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1); } +static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset); + static int gpio_set_irq_type(u32 irq, u32 type) { u32 gpio = irq_to_gpio(irq); @@ -72,6 +74,7 @@ static int gpio_set_irq_type(u32 irq, u3 int edge; void __iomem *reg = port->base; + port->both_edges &= ~(1 << (gpio & 31)); switch (type) { case IRQ_TYPE_EDGE_RISING: edge = GPIO_INT_RISE_EDGE; @@ -79,13 +82,24 @@ static int gpio_set_irq_type(u32 irq, u3 case IRQ_TYPE_EDGE_FALLING: edge = GPIO_INT_FALL_EDGE; break; + case IRQ_TYPE_EDGE_BOTH: + val = mxc_gpio_get(&port->chip, gpio & 31); + if (val) { + edge = GPIO_INT_LOW_LEV; + pr_debug("mxc: set GPIO %d to low trigger\n", gpio); + } else { + edge = GPIO_INT_HIGH_LEV; + pr_debug("mxc: set GPIO %d to high trigger\n", gpio); + } + port->both_edges |= 1 << (gpio & 31); + break; case IRQ_TYPE_LEVEL_LOW: edge = GPIO_INT_LOW_LEV; break; case IRQ_TYPE_LEVEL_HIGH: edge = GPIO_INT_HIGH_LEV; break; - default: /* this includes IRQ_TYPE_EDGE_BOTH */ + default: return -EINVAL; } @@ -98,6 +112,34 @@ static int gpio_set_irq_type(u32 irq, u3 return 0; } +static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) +{ + void __iomem *reg = port->base; + u32 bit, val; + int edge; + + reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ + bit = gpio & 0xf; + val = __raw_readl(reg); + edge = (val >> (bit << 1)) & 3; + val &= ~(0x3 << (bit << 1)); + switch (edge) { + case GPIO_INT_HIGH_LEV: + edge = GPIO_INT_LOW_LEV; + pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); + break; + case GPIO_INT_LOW_LEV: + edge = GPIO_INT_HIGH_LEV; + pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); + break; + default: + pr_err("mxc: invalid configuration for GPIO %d: %x\n", + gpio, edge); + return; + } + __raw_writel(val | (edge << (bit << 1)), reg); +} + /* handle n interrupts in one status register */ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) { @@ -105,11 +147,16 @@ static void mxc_gpio_irq_handler(struct gpio_irq_no = port->virtual_irq_start; for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) { + u32 gpio = irq_to_gpio(gpio_irq_no); if ((irq_stat & 1) == 0) continue; BUG_ON(!(irq_desc[gpio_irq_no].handle_irq)); + + if (port->both_edges & (1 << (gpio & 31))) + mxc_flip_edge(port, gpio); + irq_desc[gpio_irq_no].handle_irq(gpio_irq_no, &irq_desc[gpio_irq_no]); } @@ -124,7 +171,7 @@ static void mx3_gpio_irq_handler(u32 irq irq_stat = __raw_readl(port->base + GPIO_ISR) & __raw_readl(port->base + GPIO_IMR); - BUG_ON(!irq_stat); + mxc_gpio_irq_handler(port, irq_stat); } #endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-mx21ads.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-mx21ads.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-mx21ads.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-mx21ads.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,58 @@ +/* + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__ +#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__ + +/* + * MXC UART EVB board level configurations + */ +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR) + +/* + * Memory-mapped I/O on MX21ADS base board + */ +#define MX21ADS_MMIO_BASE_ADDR 0xF5000000 +#define MX21ADS_MMIO_SIZE SZ_16M + +#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ + (MX21ADS_MMIO_BASE_ADDR + (offset)) + +#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11) +#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000) +#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) +#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) +#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) + +/* MX21ADS_IO_REG bit definitions */ +#define MX21ADS_IO_SD_WP 0x0001 /* read */ +#define MX21ADS_IO_TP6 0x0001 /* write */ +#define MX21ADS_IO_SW_SEL 0x0002 /* read */ +#define MX21ADS_IO_TP7 0x0002 /* write */ +#define MX21ADS_IO_RESET_E_UART 0x0004 +#define MX21ADS_IO_RESET_BASE 0x0008 +#define MX21ADS_IO_CSI_CTL2 0x0010 +#define MX21ADS_IO_CSI_CTL1 0x0020 +#define MX21ADS_IO_CSI_CTL0 0x0040 +#define MX21ADS_IO_UART1_EN 0x0080 +#define MX21ADS_IO_UART4_EN 0x0100 +#define MX21ADS_IO_LCDON 0x0200 +#define MX21ADS_IO_IRDA_EN 0x0400 +#define MX21ADS_IO_IRDA_FIR_SEL 0x0800 +#define MX21ADS_IO_IRDA_MD0_B 0x1000 +#define MX21ADS_IO_IRDA_MD1 0x2000 +#define MX21ADS_IO_LED4_ON 0x4000 +#define MX21ADS_IO_LED3_ON 0x8000 + +#endif /* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-mx27ads.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-mx27ads.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-mx27ads.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-mx27ads.h 2009-05-13 09:46:19.000000000 +0200 @@ -47,7 +47,7 @@ /* * Base address of PBC controller, CS4 */ -#define PBC_BASE_ADDRESS 0xEB000000 +#define PBC_BASE_ADDRESS 0xf4300000 #define PBC_REG_ADDR(offset) (void __force __iomem *) \ (PBC_BASE_ADDRESS + (offset)) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-mx27pdk.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-mx27pdk.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-mx27pdk.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-mx27pdk.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,19 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__ +#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__ + +/* mandatory for CONFIG_DEBUG_LL */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + +#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-mx31ads.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-mx31ads.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-mx31ads.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-mx31ads.h 2009-05-13 09:46:19.000000000 +0200 @@ -114,7 +114,7 @@ #define MXC_MAX_EXP_IO_LINES 16 -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-mx31lite.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-mx31lite.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-mx31lite.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-mx31lite.h 2009-05-13 09:46:19.000000000 +0200 @@ -11,28 +11,8 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__ #define __ASM_ARCH_MXC_BOARD_MX31LITE_H__ -#define MXC_MAX_EXP_IO_LINES 16 - - -/* - * Memory Size parameters - */ - -/* - * Size of SDRAM memory - */ -#define SDRAM_MEM_SIZE SZ_128M -/* - * Size of MBX buffer memory - */ -#define MXC_MBX_MEM_SIZE SZ_16M -/* - * Size of memory available to kernel - */ -#define MEM_SIZE (SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE) - #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ +#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-mx31moboard.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-mx31moboard.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-mx31moboard.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-mx31moboard.h 2009-05-13 09:46:19.000000000 +0200 @@ -19,7 +19,7 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ #define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-mx31pdk.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-mx31pdk.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-mx31pdk.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-mx31pdk.h 2009-05-13 09:46:19.000000000 +0200 @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__ #define __ASM_ARCH_MXC_BOARD_MX31PDK_H__ -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-pcm037.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-pcm037.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-pcm037.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-pcm037.h 2009-05-13 09:46:19.000000000 +0200 @@ -19,7 +19,7 @@ #ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__ #define __ASM_ARCH_MXC_BOARD_PCM037_H__ -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-pcm038.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-pcm038.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-pcm038.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-pcm038.h 2009-05-13 09:46:19.000000000 +0200 @@ -19,7 +19,7 @@ #ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__ #define __ASM_ARCH_MXC_BOARD_PCM038_H__ -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-pcm043.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-pcm043.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-pcm043.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-pcm043.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2008 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__ +#define __ASM_ARCH_MXC_BOARD_PCM043_H__ + +/* mandatory for CONFIG_LL_DEBUG */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + +#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-qong.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-qong.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-qong.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/board-qong.h 2009-05-13 09:46:19.000000000 +0200 @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_MXC_BOARD_QONG_H__ #define __ASM_ARCH_MXC_BOARD_QONG_H__ -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/common.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/common.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/common.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/common.h 2009-05-13 09:46:19.000000000 +0200 @@ -14,7 +14,11 @@ struct platform_device; struct clk; -extern void mxc_map_io(void); +extern void mx1_map_io(void); +extern void mx21_map_io(void); +extern void mx27_map_io(void); +extern void mx31_map_io(void); +extern void mx35_map_io(void); extern void mxc_init_irq(void); extern void mxc_timer_init(struct clk *timer_clk); extern int mx1_clocks_init(unsigned long fref); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/debug-macro.S linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/debug-macro.S --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/debug-macro.S 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/debug-macro.S 2009-05-13 09:46:19.000000000 +0200 @@ -25,6 +25,9 @@ #ifdef CONFIG_MACH_MX27ADS #include #endif +#ifdef CONFIG_MACH_MX21ADS +#include +#endif #ifdef CONFIG_MACH_PCM038 #include #endif @@ -34,6 +37,12 @@ #ifdef CONFIG_MACH_QONG #include #endif +#ifdef CONFIG_MACH_PCM043 +#include +#endif +#ifdef CONFIG_MACH_MX27_3DS +#include +#endif .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/gpio.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/gpio.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/gpio.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/gpio.h 2009-05-13 09:46:19.000000000 +0200 @@ -35,6 +35,7 @@ struct mxc_gpio_port { int irq; int virtual_irq_start; struct gpio_chip chip; + u32 both_edges; }; int mxc_gpio_init(struct mxc_gpio_port*, int); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/imxfb.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/imxfb.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/imxfb.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/imxfb.h 2009-05-13 09:46:19.000000000 +0200 @@ -76,8 +76,8 @@ struct imx_fb_platform_data { u_char * fixed_screen_cpu; dma_addr_t fixed_screen_dma; - int (*init)(struct platform_device*); - int (*exit)(struct platform_device*); + int (*init)(struct platform_device *); + void (*exit)(struct platform_device *); void (*lcd_power)(int); void (*backlight_power)(int); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/imx-uart.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/imx-uart.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/imx-uart.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/imx-uart.h 2009-05-13 09:46:19.000000000 +0200 @@ -23,7 +23,7 @@ struct imxuart_platform_data { int (*init)(struct platform_device *pdev); - int (*exit)(struct platform_device *pdev); + void (*exit)(struct platform_device *pdev); unsigned int flags; }; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/iomux-mx35.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/iomux-mx35.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/iomux-mx35.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/iomux-mx35.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,1267 @@ +/* + * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option, NO_PAD_CTRL) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IOMUX_MX35_H__ +#define __MACH_IOMUX_MX35_H__ + +#include + +/* + * The naming convention for the pad modes is MX35_PAD___ + * If or refers to a GPIO, it is named + * GPIO__ see also iomux-v3.h + */ + +/* PAD MUX ALT INPSE PATH */ +#define MX35_PAD_CAPTURE__GPT_CAPIN1 IOMUX_PAD(0x328, 0x004, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__GPT_CMPOUT2 IOMUX_PAD(0x328, 0x004, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__CSPI2_SS1 IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__EPIT1_EPITO IOMUX_PAD(0x328, 0x004, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__CCM_CLK32K IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__GPIO1_4 IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL) + +#define MX35_PAD_COMPARE__GPT_CMPOUT1 IOMUX_PAD(0x32c, 0x008, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__GPT_CAPIN2 IOMUX_PAD(0x32c, 0x008, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__GPT_CMPOUT3 IOMUX_PAD(0x32c, 0x008, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__EPIT2_EPITO IOMUX_PAD(0x32c, 0x008, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__GPIO1_5 IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__SDMA_EXTDMA_2 IOMUX_PAD(0x32c, 0x008, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_WDOG_RST__WDOG_WDOG_B IOMUX_PAD(0x330, 0x00c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE IOMUX_PAD(0x330, 0x00c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_WDOG_RST__GPIO1_6 IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_0__OWIRE_LINE IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 IOMUX_PAD(0x334, 0x010, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__PWM_PWMO IOMUX_PAD(0x338, 0x014, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__CSPI1_SS2 IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT IOMUX_PAD(0x338, 0x014, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 IOMUX_PAD(0x338, 0x014, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO2_0__GPIO2_0 IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK IOMUX_PAD(0x33c, 0x018, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO3_0__GPIO3_0 IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK IOMUX_PAD(0x340, 0x01c, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B IOMUX_PAD(0x344, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_POR_B__CCM_POR_B IOMUX_PAD(0x348, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CLKO__CCM_CLKO IOMUX_PAD(0x34c, 0x020, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CLKO__GPIO1_8 IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL) + +#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 IOMUX_PAD(0x350, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 IOMUX_PAD(0x354, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 IOMUX_PAD(0x358, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 IOMUX_PAD(0x35c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 IOMUX_PAD(0x360, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_VSTBY__CCM_VSTBY IOMUX_PAD(0x364, 0x024, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_VSTBY__GPIO1_7 IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL) + +#define MX35_PAD_A0__EMI_EIM_DA_L_0 IOMUX_PAD(0x368, 0x028, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A1__EMI_EIM_DA_L_1 IOMUX_PAD(0x36c, 0x02c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A2__EMI_EIM_DA_L_2 IOMUX_PAD(0x370, 0x030, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A3__EMI_EIM_DA_L_3 IOMUX_PAD(0x374, 0x034, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A4__EMI_EIM_DA_L_4 IOMUX_PAD(0x378, 0x038, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A5__EMI_EIM_DA_L_5 IOMUX_PAD(0x37c, 0x03c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A6__EMI_EIM_DA_L_6 IOMUX_PAD(0x380, 0x040, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A7__EMI_EIM_DA_L_7 IOMUX_PAD(0x384, 0x044, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A8__EMI_EIM_DA_H_8 IOMUX_PAD(0x388, 0x048, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A9__EMI_EIM_DA_H_9 IOMUX_PAD(0x38c, 0x04c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A10__EMI_EIM_DA_H_10 IOMUX_PAD(0x390, 0x050, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_MA10__EMI_MA10 IOMUX_PAD(0x394, 0x054, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A11__EMI_EIM_DA_H_11 IOMUX_PAD(0x398, 0x058, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A12__EMI_EIM_DA_H_12 IOMUX_PAD(0x39c, 0x05c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A13__EMI_EIM_DA_H_13 IOMUX_PAD(0x3a0, 0x060, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A14__EMI_EIM_DA_H2_14 IOMUX_PAD(0x3a4, 0x064, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A15__EMI_EIM_DA_H2_15 IOMUX_PAD(0x3a8, 0x068, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A16__EMI_EIM_A_16 IOMUX_PAD(0x3ac, 0x06c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A17__EMI_EIM_A_17 IOMUX_PAD(0x3b0, 0x070, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A18__EMI_EIM_A_18 IOMUX_PAD(0x3b4, 0x074, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A19__EMI_EIM_A_19 IOMUX_PAD(0x3b8, 0x078, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A20__EMI_EIM_A_20 IOMUX_PAD(0x3bc, 0x07c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A21__EMI_EIM_A_21 IOMUX_PAD(0x3c0, 0x080, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A22__EMI_EIM_A_22 IOMUX_PAD(0x3c4, 0x084, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A23__EMI_EIM_A_23 IOMUX_PAD(0x3c8, 0x088, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A24__EMI_EIM_A_24 IOMUX_PAD(0x3cc, 0x08c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A25__EMI_EIM_A_25 IOMUX_PAD(0x3d0, 0x090, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDBA1__EMI_EIM_SDBA1 IOMUX_PAD(0x3d4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDBA0__EMI_EIM_SDBA0 IOMUX_PAD(0x3d8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD0__EMI_DRAM_D_0 IOMUX_PAD(0x3dc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1__EMI_DRAM_D_1 IOMUX_PAD(0x3e0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD2__EMI_DRAM_D_2 IOMUX_PAD(0x3e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD3__EMI_DRAM_D_3 IOMUX_PAD(0x3e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD4__EMI_DRAM_D_4 IOMUX_PAD(0x3ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD5__EMI_DRAM_D_5 IOMUX_PAD(0x3f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD6__EMI_DRAM_D_6 IOMUX_PAD(0x3f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD7__EMI_DRAM_D_7 IOMUX_PAD(0x3f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD8__EMI_DRAM_D_8 IOMUX_PAD(0x3fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD9__EMI_DRAM_D_9 IOMUX_PAD(0x400, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD10__EMI_DRAM_D_10 IOMUX_PAD(0x404, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD11__EMI_DRAM_D_11 IOMUX_PAD(0x408, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD12__EMI_DRAM_D_12 IOMUX_PAD(0x40c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD13__EMI_DRAM_D_13 IOMUX_PAD(0x410, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD14__EMI_DRAM_D_14 IOMUX_PAD(0x414, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD15__EMI_DRAM_D_15 IOMUX_PAD(0x418, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD16__EMI_DRAM_D_16 IOMUX_PAD(0x41c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD17__EMI_DRAM_D_17 IOMUX_PAD(0x420, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD18__EMI_DRAM_D_18 IOMUX_PAD(0x424, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD19__EMI_DRAM_D_19 IOMUX_PAD(0x428, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD20__EMI_DRAM_D_20 IOMUX_PAD(0x42c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD21__EMI_DRAM_D_21 IOMUX_PAD(0x430, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD22__EMI_DRAM_D_22 IOMUX_PAD(0x434, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD23__EMI_DRAM_D_23 IOMUX_PAD(0x438, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD24__EMI_DRAM_D_24 IOMUX_PAD(0x43c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD25__EMI_DRAM_D_25 IOMUX_PAD(0x440, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD26__EMI_DRAM_D_26 IOMUX_PAD(0x444, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD27__EMI_DRAM_D_27 IOMUX_PAD(0x448, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD28__EMI_DRAM_D_28 IOMUX_PAD(0x44c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD29__EMI_DRAM_D_29 IOMUX_PAD(0x450, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD30__EMI_DRAM_D_30 IOMUX_PAD(0x454, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD31__EMI_DRAM_D_31 IOMUX_PAD(0x458, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM0__EMI_DRAM_DQM_0 IOMUX_PAD(0x45c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM1__EMI_DRAM_DQM_1 IOMUX_PAD(0x460, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM2__EMI_DRAM_DQM_2 IOMUX_PAD(0x464, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM3__EMI_DRAM_DQM_3 IOMUX_PAD(0x468, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_EB0__EMI_EIM_EB0_B IOMUX_PAD(0x46c, 0x094, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_EB1__EMI_EIM_EB1_B IOMUX_PAD(0x470, 0x098, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_OE__EMI_EIM_OE IOMUX_PAD(0x474, 0x09c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS0__EMI_EIM_CS0 IOMUX_PAD(0x478, 0x0a0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS1__EMI_EIM_CS1 IOMUX_PAD(0x47c, 0x0a4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS1__EMI_NANDF_CE3 IOMUX_PAD(0x47c, 0x0a4, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS2__EMI_EIM_CS2 IOMUX_PAD(0x480, 0x0a8, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS3__EMI_EIM_CS3 IOMUX_PAD(0x484, 0x0ac, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS4__EMI_EIM_CS4 IOMUX_PAD(0x488, 0x0b0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS4__EMI_DTACK_B IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL) +#define MX35_PAD_CS4__EMI_NANDF_CE1 IOMUX_PAD(0x488, 0x0b0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS4__GPIO1_20 IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS5__EMI_EIM_CS5 IOMUX_PAD(0x48c, 0x0b4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS5__CSPI2_SS2 IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL) +#define MX35_PAD_CS5__CSPI1_SS2 IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL) +#define MX35_PAD_CS5__EMI_NANDF_CE2 IOMUX_PAD(0x48c, 0x0b4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS5__GPIO1_21 IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL) + +#define MX35_PAD_NF_CE0__EMI_NANDF_CE0 IOMUX_PAD(0x490, 0x0b8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NF_CE0__GPIO1_22 IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL) + +#define MX35_PAD_ECB__EMI_EIM_ECB IOMUX_PAD(0x494, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LBA__EMI_EIM_LBA IOMUX_PAD(0x498, 0x0bc, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_BCLK__EMI_EIM_BCLK IOMUX_PAD(0x49c, 0x0c0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RW__EMI_EIM_RW IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RAS__EMI_DRAM_RAS IOMUX_PAD(0x4a4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CAS__EMI_DRAM_CAS IOMUX_PAD(0x4a8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDWE__EMI_DRAM_SDWE IOMUX_PAD(0x4ac, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 IOMUX_PAD(0x4b0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 IOMUX_PAD(0x4b4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK IOMUX_PAD(0x4b8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 IOMUX_PAD(0x4bc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 IOMUX_PAD(0x4c0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 IOMUX_PAD(0x4c4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 IOMUX_PAD(0x4c8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__GPIO2_18 IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__GPIO2_19 IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFALE__EMI_NANDF_ALE IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__USB_TOP_USBH2_STP IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__IPU_DISPB_CS0 IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__GPIO2_20 IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFCLE__EMI_NANDF_CLE IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__GPIO2_21 IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__IPU_DISPB_WR IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__GPIO2_22 IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFRB__EMI_NANDF_RB IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRB__IPU_DISPB_RD IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRB__GPIO2_23 IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D15__EMI_EIM_D_15 IOMUX_PAD(0x4e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D14__EMI_EIM_D_14 IOMUX_PAD(0x4e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D13__EMI_EIM_D_13 IOMUX_PAD(0x4ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D12__EMI_EIM_D_12 IOMUX_PAD(0x4f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D11__EMI_EIM_D_11 IOMUX_PAD(0x4f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D10__EMI_EIM_D_10 IOMUX_PAD(0x4f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D9__EMI_EIM_D_9 IOMUX_PAD(0x4fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D8__EMI_EIM_D_8 IOMUX_PAD(0x500, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D7__EMI_EIM_D_7 IOMUX_PAD(0x504, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D6__EMI_EIM_D_6 IOMUX_PAD(0x508, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D5__EMI_EIM_D_5 IOMUX_PAD(0x50c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D4__EMI_EIM_D_4 IOMUX_PAD(0x510, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3__EMI_EIM_D_3 IOMUX_PAD(0x514, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D2__EMI_EIM_D_2 IOMUX_PAD(0x518, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D1__EMI_EIM_D_1 IOMUX_PAD(0x51c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D0__EMI_EIM_D_0 IOMUX_PAD(0x520, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D8__IPU_CSI_D_8 IOMUX_PAD(0x524, 0x0e0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D8__KPP_COL_0 IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D8__GPIO1_20 IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL) +#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 IOMUX_PAD(0x524, 0x0e0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D9__IPU_CSI_D_9 IOMUX_PAD(0x528, 0x0e4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D9__KPP_COL_1 IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D9__GPIO1_21 IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL) +#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 IOMUX_PAD(0x528, 0x0e4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D10__IPU_CSI_D_10 IOMUX_PAD(0x52c, 0x0e8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D10__KPP_COL_2 IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D10__GPIO1_22 IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL) +#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 IOMUX_PAD(0x52c, 0x0e8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D11__IPU_CSI_D_11 IOMUX_PAD(0x530, 0x0ec, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D11__KPP_COL_3 IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D11__GPIO1_23 IOMUX_PAD(0x530, 0x0ec, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D12__IPU_CSI_D_12 IOMUX_PAD(0x534, 0x0f0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D12__KPP_ROW_0 IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D12__GPIO1_24 IOMUX_PAD(0x534, 0x0f0, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D13__IPU_CSI_D_13 IOMUX_PAD(0x538, 0x0f4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D13__KPP_ROW_1 IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D13__GPIO1_25 IOMUX_PAD(0x538, 0x0f4, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D14__IPU_CSI_D_14 IOMUX_PAD(0x53c, 0x0f8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D14__KPP_ROW_2 IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D14__GPIO1_26 IOMUX_PAD(0x53c, 0x0f8, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D15__IPU_CSI_D_15 IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D15__KPP_ROW_3 IOMUX_PAD(0x540, 0x0fc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D15__GPIO1_27 IOMUX_PAD(0x540, 0x0fc, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK IOMUX_PAD(0x544, 0x100, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_MCLK__GPIO1_28 IOMUX_PAD(0x544, 0x100, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC IOMUX_PAD(0x548, 0x104, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_VSYNC__GPIO1_29 IOMUX_PAD(0x548, 0x104, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC IOMUX_PAD(0x54c, 0x108, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_HSYNC__GPIO1_30 IOMUX_PAD(0x54c, 0x108, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK IOMUX_PAD(0x550, 0x10c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_PIXCLK__GPIO1_31 IOMUX_PAD(0x550, 0x10c, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C1_CLK__I2C1_SCL IOMUX_PAD(0x554, 0x110, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C1_CLK__GPIO2_24 IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK IOMUX_PAD(0x554, 0x110, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C1_DAT__I2C1_SDA IOMUX_PAD(0x558, 0x114, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C1_DAT__GPIO2_25 IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C2_CLK__I2C2_SCL IOMUX_PAD(0x55c, 0x118, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__CAN1_TXCAN IOMUX_PAD(0x55c, 0x118, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR IOMUX_PAD(0x55c, 0x118, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__GPIO2_26 IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x55c, 0x118, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C2_DAT__I2C2_SDA IOMUX_PAD(0x560, 0x11c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__CAN1_RXCAN IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__GPIO2_27 IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x560, 0x11c, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD IOMUX_PAD(0x564, 0x120, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD4__GPIO2_28 IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 IOMUX_PAD(0x564, 0x120, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD IOMUX_PAD(0x568, 0x124, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD4__GPIO2_29 IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 IOMUX_PAD(0x568, 0x124, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC IOMUX_PAD(0x56c, 0x128, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK4__GPIO2_30 IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 IOMUX_PAD(0x56c, 0x128, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS IOMUX_PAD(0x570, 0x12c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS4__GPIO2_31 IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 IOMUX_PAD(0x570, 0x12c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD IOMUX_PAD(0x574, 0x130, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x574, 0x130, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD5__CSPI2_MOSI IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD5__GPIO1_0 IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL) +#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 IOMUX_PAD(0x574, 0x130, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD IOMUX_PAD(0x578, 0x134, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__CSPI2_MISO IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__GPIO1_1 IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 IOMUX_PAD(0x578, 0x134, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC IOMUX_PAD(0x57c, 0x138, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__CSPI2_SCLK IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__GPIO1_2 IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 IOMUX_PAD(0x57c, 0x138, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS IOMUX_PAD(0x580, 0x13c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS5__CSPI2_RDY IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS5__GPIO1_3 IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 IOMUX_PAD(0x580, 0x13c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCKR__ESAI_SCKR IOMUX_PAD(0x584, 0x140, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCKR__GPIO1_4 IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL) +#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 IOMUX_PAD(0x584, 0x140, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FSR__ESAI_FSR IOMUX_PAD(0x588, 0x144, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FSR__GPIO1_5 IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL) +#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 IOMUX_PAD(0x588, 0x144, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_HCKR__ESAI_HCKR IOMUX_PAD(0x58c, 0x148, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS IOMUX_PAD(0x58c, 0x148, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__CSPI2_SS0 IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__IPU_FLASH_STROBE IOMUX_PAD(0x58c, 0x148, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__GPIO1_6 IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL) +#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 IOMUX_PAD(0x58c, 0x148, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCKT__ESAI_SCKT IOMUX_PAD(0x590, 0x14c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCKT__GPIO1_7 IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL) +#define MX35_PAD_SCKT__IPU_CSI_D_0 IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL) +#define MX35_PAD_SCKT__KPP_ROW_2 IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL) + +#define MX35_PAD_FST__ESAI_FST IOMUX_PAD(0x594, 0x150, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FST__GPIO1_8 IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL) +#define MX35_PAD_FST__IPU_CSI_D_1 IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL) +#define MX35_PAD_FST__KPP_ROW_3 IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL) + +#define MX35_PAD_HCKT__ESAI_HCKT IOMUX_PAD(0x598, 0x154, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__GPIO1_9 IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__IPU_CSI_D_2 IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__KPP_COL_3 IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0 IOMUX_PAD(0x59c, 0x158, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC IOMUX_PAD(0x59c, 0x158, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__CSPI2_SS2 IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__CAN2_TXCAN IOMUX_PAD(0x59c, 0x158, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__UART2_DTR IOMUX_PAD(0x59c, 0x158, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__GPIO1_10 IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 IOMUX_PAD(0x59c, 0x158, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1 IOMUX_PAD(0x5a0, 0x15c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS IOMUX_PAD(0x5a0, 0x15c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__CSPI2_SS3 IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__CAN2_RXCAN IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__UART2_DSR IOMUX_PAD(0x5a0, 0x15c, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__GPIO1_11 IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__IPU_CSI_D_3 IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__KPP_ROW_0 IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2 IOMUX_PAD(0x5a4, 0x160, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__I2C3_SCL IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1 IOMUX_PAD(0x5a4, 0x160, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__GPIO1_12 IOMUX_PAD(0x5a4, 0x160, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__IPU_CSI_D_4 IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__KPP_ROW_1 IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3 IOMUX_PAD(0x5a8, 0x164, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__I2C3_SDA IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2 IOMUX_PAD(0x5a8, 0x164, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__GPIO1_13 IOMUX_PAD(0x5a8, 0x164, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__IPU_CSI_D_5 IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__KPP_COL_0 IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX1__ESAI_TX1 IOMUX_PAD(0x5ac, 0x168, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__CCM_PMIC_RDY IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL) +#define MX35_PAD_TX1__CSPI1_SS2 IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL) +#define MX35_PAD_TX1__EMI_NANDF_CE3 IOMUX_PAD(0x5ac, 0x168, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__UART2_RI IOMUX_PAD(0x5ac, 0x168, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__GPIO1_14 IOMUX_PAD(0x5ac, 0x168, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__IPU_CSI_D_6 IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__KPP_COL_1 IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX0__ESAI_TX0 IOMUX_PAD(0x5b0, 0x16c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL) +#define MX35_PAD_TX0__CSPI1_SS3 IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__EMI_DTACK_B IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL) +#define MX35_PAD_TX0__UART2_DCD IOMUX_PAD(0x5b0, 0x16c, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__GPIO1_15 IOMUX_PAD(0x5b0, 0x16c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__IPU_CSI_D_7 IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__KPP_COL_2 IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x5b4, 0x170, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MOSI__GPIO1_16 IOMUX_PAD(0x5b4, 0x170, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 IOMUX_PAD(0x5b4, 0x170, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x5b8, 0x174, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MISO__GPIO1_17 IOMUX_PAD(0x5b8, 0x174, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 IOMUX_PAD(0x5b8, 0x174, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x5bc, 0x178, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__OWIRE_LINE IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__CSPI2_SS3 IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__GPIO1_18 IOMUX_PAD(0x5bc, 0x178, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 IOMUX_PAD(0x5bc, 0x178, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x5c0, 0x17c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__PWM_PWMO IOMUX_PAD(0x5c0, 0x17c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__CCM_CLK32K IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__GPIO1_19 IOMUX_PAD(0x5c0, 0x17c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 IOMUX_PAD(0x5c0, 0x17c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 IOMUX_PAD(0x5c0, 0x17c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x5c4, 0x180, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SCLK__GPIO3_4 IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 IOMUX_PAD(0x5c4, 0x180, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 IOMUX_PAD(0x5c4, 0x180, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY IOMUX_PAD(0x5c8, 0x184, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 IOMUX_PAD(0x5c8, 0x184, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 IOMUX_PAD(0x5c8, 0x184, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RXD1__UART1_RXD_MUX IOMUX_PAD(0x5cc, 0x188, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD1__CSPI2_MOSI IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL) +#define MX35_PAD_RXD1__KPP_COL_4 IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD1__GPIO3_6 IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 IOMUX_PAD(0x5cc, 0x188, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TXD1__UART1_TXD_MUX IOMUX_PAD(0x5d0, 0x18c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD1__CSPI2_MISO IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL) +#define MX35_PAD_TXD1__KPP_COL_5 IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD1__GPIO3_7 IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 IOMUX_PAD(0x5d0, 0x18c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RTS1__UART1_RTS IOMUX_PAD(0x5d4, 0x190, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__CSPI2_SCLK IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS1__I2C3_SCL IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS1__IPU_CSI_D_0 IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS1__KPP_COL_6 IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__GPIO3_8 IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__EMI_NANDF_CE1 IOMUX_PAD(0x5d4, 0x190, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 IOMUX_PAD(0x5d4, 0x190, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CTS1__UART1_CTS IOMUX_PAD(0x5d8, 0x194, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__CSPI2_RDY IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS1__I2C3_SDA IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS1__IPU_CSI_D_1 IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS1__KPP_COL_7 IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__GPIO3_9 IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__EMI_NANDF_CE2 IOMUX_PAD(0x5d8, 0x194, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 IOMUX_PAD(0x5d8, 0x194, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RXD2__UART2_RXD_MUX IOMUX_PAD(0x5dc, 0x198, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD2__KPP_ROW_4 IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD2__GPIO3_10 IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL) + +#define MX35_PAD_TXD2__UART2_TXD_MUX IOMUX_PAD(0x5e0, 0x19c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL) +#define MX35_PAD_TXD2__KPP_ROW_5 IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD2__GPIO3_11 IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RTS2__UART2_RTS IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1 IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS2__CAN2_RXCAN IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS2__IPU_CSI_D_2 IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS2__KPP_ROW_6 IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__GPIO3_12 IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__UART3_RXD_MUX IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CTS2__UART2_CTS IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__CAN2_TXCAN IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__IPU_CSI_D_3 IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS2__KPP_ROW_7 IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__GPIO3_13 IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__UART3_TXD_MUX IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RTCK__ARM11P_TOP_RTCK IOMUX_PAD(0x5ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TCK__SJC_TCK IOMUX_PAD(0x5f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TMS__SJC_TMS IOMUX_PAD(0x5f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TDI__SJC_TDI IOMUX_PAD(0x5f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TDO__SJC_TDO IOMUX_PAD(0x5fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TRSTB__SJC_TRSTB IOMUX_PAD(0x600, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DE_B__SJC_DE_B IOMUX_PAD(0x604, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SJC_MOD__SJC_MOD IOMUX_PAD(0x608, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR IOMUX_PAD(0x60c, 0x1a8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR IOMUX_PAD(0x60c, 0x1a8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_PWR__GPIO3_14 IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL) + +#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC IOMUX_PAD(0x610, 0x1ac, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_OC__GPIO3_15 IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD0__IPU_DISPB_DAT_0 IOMUX_PAD(0x614, 0x1b0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD0__GPIO2_0 IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL) +#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 IOMUX_PAD(0x614, 0x1b0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD1__IPU_DISPB_DAT_1 IOMUX_PAD(0x618, 0x1b4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD1__GPIO2_1 IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL) +#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 IOMUX_PAD(0x618, 0x1b4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD2__IPU_DISPB_DAT_2 IOMUX_PAD(0x61c, 0x1b8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD2__GPIO2_2 IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 IOMUX_PAD(0x61c, 0x1b8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD3__IPU_DISPB_DAT_3 IOMUX_PAD(0x620, 0x1bc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD3__GPIO2_3 IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL) +#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 IOMUX_PAD(0x620, 0x1bc, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD4__IPU_DISPB_DAT_4 IOMUX_PAD(0x624, 0x1c0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD4__GPIO2_4 IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 IOMUX_PAD(0x624, 0x1c0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD5__IPU_DISPB_DAT_5 IOMUX_PAD(0x628, 0x1c4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD5__GPIO2_5 IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL) +#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 IOMUX_PAD(0x628, 0x1c4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD6__IPU_DISPB_DAT_6 IOMUX_PAD(0x62c, 0x1c8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD6__GPIO2_6 IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL) +#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 IOMUX_PAD(0x62c, 0x1c8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD7__IPU_DISPB_DAT_7 IOMUX_PAD(0x630, 0x1cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD7__GPIO2_7 IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL) +#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 IOMUX_PAD(0x630, 0x1cc, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD8__IPU_DISPB_DAT_8 IOMUX_PAD(0x634, 0x1d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD8__GPIO2_8 IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4 0, NO_PAD_CTRL) +#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD10__GPIO2_10 IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 IOMUX_PAD(0x63c, 0x1d8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD11__IPU_DISPB_DAT_11 IOMUX_PAD(0x640, 0x1dc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD11__GPIO2_11 IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL) +#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 IOMUX_PAD(0x640, 0x1dc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4 IOMUX_PAD(0x640, 0x1dc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD12__IPU_DISPB_DAT_12 IOMUX_PAD(0x644, 0x1e0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD12__GPIO2_12 IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL) +#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 IOMUX_PAD(0x644, 0x1e0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5 IOMUX_PAD(0x644, 0x1e0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD13__IPU_DISPB_DAT_13 IOMUX_PAD(0x648, 0x1e4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD13__GPIO2_13 IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL) +#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 IOMUX_PAD(0x648, 0x1e4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6 IOMUX_PAD(0x648, 0x1e4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD14__IPU_DISPB_DAT_14 IOMUX_PAD(0x64c, 0x1e8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD14__GPIO2_14 IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x64c, 0x1e8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7 IOMUX_PAD(0x64c, 0x1e8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD15__IPU_DISPB_DAT_15 IOMUX_PAD(0x650, 0x1ec, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD15__GPIO2_15 IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL) +#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x650, 0x1ec, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8 IOMUX_PAD(0x650, 0x1ec, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD16__IPU_DISPB_DAT_16 IOMUX_PAD(0x654, 0x1f0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__GPIO2_16 IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x654, 0x1f0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9 IOMUX_PAD(0x654, 0x1f0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD17__IPU_DISPB_DAT_17 IOMUX_PAD(0x658, 0x1f4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__IPU_DISPB_CS2 IOMUX_PAD(0x658, 0x1f4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__GPIO2_17 IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x658, 0x1f4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10 IOMUX_PAD(0x658, 0x1f4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD18__IPU_DISPB_DAT_18 IOMUX_PAD(0x65c, 0x1f8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL) +#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL) +#define MX35_PAD_LD18__ESDHC3_CMD IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__GPIO3_24 IOMUX_PAD(0x65c, 0x1f8, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x65c, 0x1f8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11 IOMUX_PAD(0x65c, 0x1f8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD19__IPU_DISPB_DAT_19 IOMUX_PAD(0x660, 0x1fc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__IPU_DISPB_BCLK IOMUX_PAD(0x660, 0x1fc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__IPU_DISPB_CS1 IOMUX_PAD(0x660, 0x1fc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__ESDHC3_CLK IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__GPIO3_25 IOMUX_PAD(0x660, 0x1fc, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x660, 0x1fc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12 IOMUX_PAD(0x660, 0x1fc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD20__IPU_DISPB_DAT_20 IOMUX_PAD(0x664, 0x200, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__IPU_DISPB_CS0 IOMUX_PAD(0x664, 0x200, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__IPU_DISPB_SD_CLK IOMUX_PAD(0x664, 0x200, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__ESDHC3_DAT0 IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__GPIO3_26 IOMUX_PAD(0x664, 0x200, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 IOMUX_PAD(0x664, 0x200, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13 IOMUX_PAD(0x664, 0x200, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD21__IPU_DISPB_DAT_21 IOMUX_PAD(0x668, 0x204, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__IPU_DISPB_PAR_RS IOMUX_PAD(0x668, 0x204, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__IPU_DISPB_SER_RS IOMUX_PAD(0x668, 0x204, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__ESDHC3_DAT1 IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__USB_TOP_USBOTG_STP IOMUX_PAD(0x668, 0x204, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__GPIO3_27 IOMUX_PAD(0x668, 0x204, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x668, 0x204, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14 IOMUX_PAD(0x668, 0x204, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD22__IPU_DISPB_DAT_22 IOMUX_PAD(0x66c, 0x208, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__IPU_DISPB_WR IOMUX_PAD(0x66c, 0x208, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__IPU_DISPB_SD_D_I IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__ESDHC3_DAT2 IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__GPIO3_28 IOMUX_PAD(0x66c, 0x208, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x66c, 0x208, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__ARM11P_TOP_TRCTL IOMUX_PAD(0x66c, 0x208, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD23__IPU_DISPB_DAT_23 IOMUX_PAD(0x670, 0x20c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__IPU_DISPB_RD IOMUX_PAD(0x670, 0x20c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL) +#define MX35_PAD_LD23__ESDHC3_DAT3 IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__GPIO3_29 IOMUX_PAD(0x670, 0x20c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x670, 0x20c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__ARM11P_TOP_TRCLK IOMUX_PAD(0x670, 0x20c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC IOMUX_PAD(0x674, 0x210, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__GPIO3_30 IOMUX_PAD(0x674, 0x210, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x674, 0x210, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 IOMUX_PAD(0x674, 0x210, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK IOMUX_PAD(0x678, 0x214, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK IOMUX_PAD(0x678, 0x214, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__GPIO3_31 IOMUX_PAD(0x678, 0x214, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 IOMUX_PAD(0x678, 0x214, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 IOMUX_PAD(0x678, 0x214, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY IOMUX_PAD(0x67c, 0x218, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O IOMUX_PAD(0x67c, 0x218, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__GPIO1_0 IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 IOMUX_PAD(0x67c, 0x218, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 IOMUX_PAD(0x67c, 0x218, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR IOMUX_PAD(0x680, 0x21c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CONTRAST__GPIO1_1 IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL) +#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 IOMUX_PAD(0x680, 0x21c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 IOMUX_PAD(0x680, 0x21c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC IOMUX_PAD(0x684, 0x220, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 IOMUX_PAD(0x684, 0x220, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__GPIO1_2 IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD IOMUX_PAD(0x684, 0x220, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 IOMUX_PAD(0x684, 0x220, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV IOMUX_PAD(0x688, 0x224, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS IOMUX_PAD(0x688, 0x224, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__GPIO1_3 IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x688, 0x224, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 IOMUX_PAD(0x688, 0x224, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS IOMUX_PAD(0x68c, 0x228, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__IPU_DISPB_CS2 IOMUX_PAD(0x68c, 0x228, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__GPIO1_4 IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x68c, 0x228, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 IOMUX_PAD(0x68c, 0x228, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL IOMUX_PAD(0x690, 0x22c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__GPIO1_5 IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x690, 0x22c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 IOMUX_PAD(0x690, 0x22c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x694, 0x230, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__MSHC_SCLK IOMUX_PAD(0x694, 0x230, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__GPIO1_6 IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL IOMUX_PAD(0x694, 0x230, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x698, 0x234, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__MSHC_BS IOMUX_PAD(0x698, 0x234, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK IOMUX_PAD(0x698, 0x234, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__GPIO1_7 IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK IOMUX_PAD(0x698, 0x234, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x69c, 0x238, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__MSHC_DATA_0 IOMUX_PAD(0x69c, 0x238, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 IOMUX_PAD(0x69c, 0x238, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__GPIO1_8 IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 IOMUX_PAD(0x69c, 0x238, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x6a0, 0x23c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__MSHC_DATA_1 IOMUX_PAD(0x6a0, 0x23c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS IOMUX_PAD(0x6a0, 0x23c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__GPIO1_9 IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 IOMUX_PAD(0x6a0, 0x23c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x6a4, 0x240, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__MSHC_DATA_2 IOMUX_PAD(0x6a4, 0x240, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR IOMUX_PAD(0x6a4, 0x240, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__GPIO1_10 IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 IOMUX_PAD(0x6a4, 0x240, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x6a8, 0x244, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__MSHC_DATA_3 IOMUX_PAD(0x6a8, 0x244, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD IOMUX_PAD(0x6a8, 0x244, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__GPIO1_11 IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 IOMUX_PAD(0x6a8, 0x244, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x6ac, 0x248, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__I2C3_SCL IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__ESDHC1_DAT4 IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__IPU_CSI_D_2 IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__GPIO2_0 IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x6ac, 0x248, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL) + +#define MX35_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x6b0, 0x24c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__I2C3_SDA IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__ESDHC1_DAT5 IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__IPU_CSI_D_3 IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__GPIO2_1 IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2 IOMUX_PAD(0x6b0, 0x24c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x6b4, 0x250, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6 IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4 IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__GPIO2_2 IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x6b8, 0x254, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX IOMUX_PAD(0x6b8, 0x254, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7 IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5 IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__GPIO2_3 IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x6bc, 0x258, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__UART3_RTS IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__CAN1_RXCAN IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6 IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__GPIO2_4 IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x6c0, 0x25c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__UART3_CTS IOMUX_PAD(0x6c0, 0x25c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__CAN1_TXCAN IOMUX_PAD(0x6c0, 0x25c, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7 IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__GPIO2_5 IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL) + +#define MX35_PAD_ATA_CS0__ATA_CS0 IOMUX_PAD(0x6c4, 0x260, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__CSPI1_SS3 IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1 IOMUX_PAD(0x6c4, 0x260, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__GPIO2_6 IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__IPU_DIAGB_0 IOMUX_PAD(0x6c4, 0x260, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 IOMUX_PAD(0x6c4, 0x260, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_CS1__ATA_CS1 IOMUX_PAD(0x6c8, 0x264, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2 IOMUX_PAD(0x6c8, 0x264, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__CSPI2_SS0 IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__GPIO2_7 IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__IPU_DIAGB_1 IOMUX_PAD(0x6c8, 0x264, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 IOMUX_PAD(0x6c8, 0x264, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DIOR__ATA_DIOR IOMUX_PAD(0x6cc, 0x268, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0 IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 IOMUX_PAD(0x6cc, 0x268, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__CSPI2_SS1 IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__GPIO2_8 IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2 IOMUX_PAD(0x6cc, 0x268, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 IOMUX_PAD(0x6cc, 0x268, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DIOW__ATA_DIOW IOMUX_PAD(0x6d0, 0x26c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1 IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP IOMUX_PAD(0x6d0, 0x26c, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 IOMUX_PAD(0x6d0, 0x26c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__CSPI2_MOSI IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__GPIO2_9 IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3 IOMUX_PAD(0x6d0, 0x26c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 IOMUX_PAD(0x6d0, 0x26c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DMACK__ATA_DMACK IOMUX_PAD(0x6d4, 0x270, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2 IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__CSPI2_MISO IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__GPIO2_10 IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4 IOMUX_PAD(0x6d4, 0x270, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 IOMUX_PAD(0x6d4, 0x270, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_RESET_B__ATA_RESET_B IOMUX_PAD(0x6d8, 0x274, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O IOMUX_PAD(0x6d8, 0x274, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__CSPI2_RDY IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__GPIO2_11 IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 IOMUX_PAD(0x6d8, 0x274, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 IOMUX_PAD(0x6d8, 0x274, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_IORDY__ATA_IORDY IOMUX_PAD(0x6dc, 0x278, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4 IOMUX_PAD(0x6dc, 0x278, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4 IOMUX_PAD(0x6dc, 0x278, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__GPIO2_12 IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6 IOMUX_PAD(0x6dc, 0x278, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 IOMUX_PAD(0x6dc, 0x278, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA0__ATA_DATA_0 IOMUX_PAD(0x6e0, 0x27c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5 IOMUX_PAD(0x6e0, 0x27c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5 IOMUX_PAD(0x6e0, 0x27c, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__GPIO2_13 IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7 IOMUX_PAD(0x6e0, 0x27c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 IOMUX_PAD(0x6e0, 0x27c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA1__ATA_DATA_1 IOMUX_PAD(0x6e4, 0x280, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6 IOMUX_PAD(0x6e4, 0x280, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK IOMUX_PAD(0x6e4, 0x280, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6 IOMUX_PAD(0x6e4, 0x280, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__GPIO2_14 IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8 IOMUX_PAD(0x6e4, 0x280, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 IOMUX_PAD(0x6e4, 0x280, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA2__ATA_DATA_2 IOMUX_PAD(0x6e8, 0x284, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7 IOMUX_PAD(0x6e8, 0x284, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS IOMUX_PAD(0x6e8, 0x284, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7 IOMUX_PAD(0x6e8, 0x284, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__GPIO2_15 IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9 IOMUX_PAD(0x6e8, 0x284, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 IOMUX_PAD(0x6e8, 0x284, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA3__ATA_DATA_3 IOMUX_PAD(0x6e8, 0x288, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__ESDHC3_CLK IOMUX_PAD(0x6e8, 0x288, 1, 0x814, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x6e8, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__CSPI2_SCLK IOMUX_PAD(0x6e8, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__GPIO2_16 IOMUX_PAD(0x6e8, 0x288, 5, 0x884, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 IOMUX_PAD(0x6e8, 0x288, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 IOMUX_PAD(0x6e8, 0x288, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA4__ATA_DATA_4 IOMUX_PAD(0x6f0, 0x28c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__ESDHC3_CMD IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__GPIO2_17 IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11 IOMUX_PAD(0x6f0, 0x28c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 IOMUX_PAD(0x6f0, 0x28c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA5__ATA_DATA_5 IOMUX_PAD(0x6f4, 0x290, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__GPIO2_18 IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12 IOMUX_PAD(0x6f4, 0x290, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 IOMUX_PAD(0x6f4, 0x290, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA6__ATA_DATA_6 IOMUX_PAD(0x6f8, 0x294, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__CAN1_TXCAN IOMUX_PAD(0x6f8, 0x294, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__UART1_DTR IOMUX_PAD(0x6f8, 0x294, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__GPIO2_19 IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13 IOMUX_PAD(0x6f8, 0x294, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA7__ATA_DATA_7 IOMUX_PAD(0x6fc, 0x298, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__CAN1_RXCAN IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__UART1_DSR IOMUX_PAD(0x6fc, 0x298, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__GPIO2_20 IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14 IOMUX_PAD(0x6fc, 0x298, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA8__ATA_DATA_8 IOMUX_PAD(0x700, 0x29c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__UART3_RTS IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__UART1_RI IOMUX_PAD(0x700, 0x29c, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__GPIO2_21 IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15 IOMUX_PAD(0x700, 0x29c, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA9__ATA_DATA_9 IOMUX_PAD(0x704, 0x2a0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__UART3_CTS IOMUX_PAD(0x704, 0x2a0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__UART1_DCD IOMUX_PAD(0x704, 0x2a0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__GPIO2_22 IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16 IOMUX_PAD(0x704, 0x2a0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA10__ATA_DATA_10 IOMUX_PAD(0x708, 0x2a4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__GPIO2_23 IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17 IOMUX_PAD(0x708, 0x2a4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA11__ATA_DATA_11 IOMUX_PAD(0x70c, 0x2a8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX IOMUX_PAD(0x70c, 0x2a8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__GPIO2_24 IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18 IOMUX_PAD(0x70c, 0x2a8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA12__ATA_DATA_12 IOMUX_PAD(0x710, 0x2ac, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA12__I2C3_SCL IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA12__GPIO2_25 IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19 IOMUX_PAD(0x710, 0x2ac, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA13__ATA_DATA_13 IOMUX_PAD(0x714, 0x2b0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA13__I2C3_SDA IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA13__GPIO2_26 IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20 IOMUX_PAD(0x714, 0x2b0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA14__ATA_DATA_14 IOMUX_PAD(0x718, 0x2b4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0 IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__KPP_ROW_0 IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__GPIO2_27 IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21 IOMUX_PAD(0x718, 0x2b4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA15__ATA_DATA_15 IOMUX_PAD(0x71c, 0x2b8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1 IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__KPP_ROW_1 IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__GPIO2_28 IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22 IOMUX_PAD(0x71c, 0x2b8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_INTRQ__ATA_INTRQ IOMUX_PAD(0x720, 0x2bc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__KPP_ROW_2 IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__GPIO2_29 IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 IOMUX_PAD(0x720, 0x2bc, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN IOMUX_PAD(0x724, 0x2c0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__GPIO2_30 IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 IOMUX_PAD(0x724, 0x2c0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DMARQ__ATA_DMARQ IOMUX_PAD(0x728, 0x2c4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__KPP_COL_0 IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__GPIO2_31 IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 IOMUX_PAD(0x728, 0x2c4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 IOMUX_PAD(0x728, 0x2c4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DA0__ATA_DA_0 IOMUX_PAD(0x72c, 0x2c8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__IPU_CSI_D_5 IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__KPP_COL_1 IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__GPIO3_0 IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__IPU_DIAGB_26 IOMUX_PAD(0x72c, 0x2c8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 IOMUX_PAD(0x72c, 0x2c8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DA1__ATA_DA_1 IOMUX_PAD(0x730, 0x2cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__IPU_CSI_D_6 IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__KPP_COL_2 IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__GPIO3_1 IOMUX_PAD(0x730, 0x2cc, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__IPU_DIAGB_27 IOMUX_PAD(0x730, 0x2cc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 IOMUX_PAD(0x730, 0x2cc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DA2__ATA_DA_2 IOMUX_PAD(0x734, 0x2d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__IPU_CSI_D_7 IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__KPP_COL_3 IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__GPIO3_2 IOMUX_PAD(0x734, 0x2d0, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__IPU_DIAGB_28 IOMUX_PAD(0x734, 0x2d0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 IOMUX_PAD(0x734, 0x2d0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_MLB_CLK__MLB_MLBCLK IOMUX_PAD(0x738, 0x2d4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_MLB_CLK__GPIO3_3 IOMUX_PAD(0x738, 0x2d4, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_MLB_DAT__MLB_MLBDAT IOMUX_PAD(0x73c, 0x2d8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_MLB_DAT__GPIO3_4 IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL) + +#define MX35_PAD_MLB_SIG__MLB_MLBSIG IOMUX_PAD(0x740, 0x2dc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_MLB_SIG__GPIO3_5 IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x744, 0x2e0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__GPIO3_6 IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 IOMUX_PAD(0x744, 0x2e0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK IOMUX_PAD(0x748, 0x2e4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX IOMUX_PAD(0x748, 0x2e4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP IOMUX_PAD(0x748, 0x2e4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__GPIO3_7 IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 IOMUX_PAD(0x748, 0x2e4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x74c, 0x2e8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__UART3_RTS IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__GPIO3_8 IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK IOMUX_PAD(0x74c, 0x2e8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 IOMUX_PAD(0x74c, 0x2e8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_COL__FEC_COL IOMUX_PAD(0x750, 0x2ec, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__ESDHC1_DAT7 IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__UART3_CTS IOMUX_PAD(0x750, 0x2ec, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__CSPI2_RDY IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__GPIO3_9 IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS IOMUX_PAD(0x750, 0x2ec, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 IOMUX_PAD(0x750, 0x2ec, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0 IOMUX_PAD(0x754, 0x2f0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__PWM_PWMO IOMUX_PAD(0x754, 0x2f0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__UART3_DTR IOMUX_PAD(0x754, 0x2f0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__CSPI2_SS0 IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__GPIO3_10 IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 IOMUX_PAD(0x754, 0x2f0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 IOMUX_PAD(0x754, 0x2f0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0 IOMUX_PAD(0x758, 0x2f4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x758, 0x2f4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__UART3_DSR IOMUX_PAD(0x758, 0x2f4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__CSPI2_SS1 IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__GPIO3_11 IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 IOMUX_PAD(0x758, 0x2f4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 IOMUX_PAD(0x758, 0x2f4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x75c, 0x2f8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__UART3_RI IOMUX_PAD(0x75c, 0x2f8, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__GPIO3_12 IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS IOMUX_PAD(0x75c, 0x2f8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 IOMUX_PAD(0x75c, 0x2f8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x760, 0x2fc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__CAN2_TXCAN IOMUX_PAD(0x760, 0x2fc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__UART3_DCD IOMUX_PAD(0x760, 0x2fc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__GPIO3_13 IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__IPU_DISPB_WR IOMUX_PAD(0x760, 0x2fc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 IOMUX_PAD(0x760, 0x2fc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x764, 0x300, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__CAN2_RXCAN IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__GPIO3_14 IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD IOMUX_PAD(0x764, 0x300, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 IOMUX_PAD(0x764, 0x300, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR IOMUX_PAD(0x768, 0x304, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__GPIO3_15 IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 IOMUX_PAD(0x768, 0x304, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR IOMUX_PAD(0x76c, 0x308, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__KPP_COL_4 IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__GPIO3_16 IOMUX_PAD(0x76c, 0x308, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL) + +#define MX35_PAD_FEC_CRS__FEC_CRS IOMUX_PAD(0x770, 0x30c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__IPU_CSI_D_1 IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR IOMUX_PAD(0x770, 0x30c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__KPP_COL_5 IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__GPIO3_17 IOMUX_PAD(0x770, 0x30c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE IOMUX_PAD(0x770, 0x30c, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1 IOMUX_PAD(0x774, 0x310, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC IOMUX_PAD(0x774, 0x310, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__KPP_COL_6 IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__GPIO3_18 IOMUX_PAD(0x774, 0x310, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 IOMUX_PAD(0x774, 0x310, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1 IOMUX_PAD(0x778, 0x314, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__KPP_COL_7 IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__GPIO3_19 IOMUX_PAD(0x778, 0x314, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 IOMUX_PAD(0x778, 0x314, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2 IOMUX_PAD(0x77c, 0x318, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__KPP_ROW_4 IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__GPIO3_20 IOMUX_PAD(0x77c, 0x318, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2 IOMUX_PAD(0x780, 0x31c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__KPP_ROW_5 IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__GPIO3_21 IOMUX_PAD(0x780, 0x31c, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3 IOMUX_PAD(0x784, 0x320, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__KPP_ROW_6 IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__GPIO3_22 IOMUX_PAD(0x784, 0x320, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3 IOMUX_PAD(0x788, 0x324, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__KPP_ROW_7 IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__GPIO3_23 IOMUX_PAD(0x788, 0x324, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK IOMUX_PAD(0x78c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TEST_MODE__TCU_TEST_MODE IOMUX_PAD(0x790, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + + +#endif /* __MACH_IOMUX_MX35_H__ */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/iomux-mx3.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/iomux-mx3.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/iomux-mx3.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/iomux-mx3.h 2009-05-13 09:46:19.000000000 +0200 @@ -114,7 +114,7 @@ enum iomux_gp_func { * - setups the iomux according to the configuration * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib */ -int mxc_iomux_setup_pin(const unsigned int pin, const char *label); +int mxc_iomux_alloc_pin(const unsigned int pin, const char *label); /* * setups mutliple pins * convenient way to call the above function with tables @@ -633,6 +633,40 @@ enum iomux_pins { #define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO) +#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO) +#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 * cspi1_ss1*/ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/iomux-v3.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/iomux-v3.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/iomux-v3.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/iomux-v3.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,121 @@ +/* + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IOMUX_V3_H__ +#define __MACH_IOMUX_V3_H__ + +/* + * build IOMUX_PAD structure + * + * This iomux scheme is based around pads, which are the physical balls + * on the processor. + * + * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls + * things like driving strength and pullup/pulldown. + * - Each pad can have but not necessarily does have an output routing register + * (IOMUXC_SW_MUX_CTL_PAD_x). + * - Each pad can have but not necessarily does have an input routing register + * (IOMUXC_x_SELECT_INPUT) + * + * The three register sets do not have a fixed offset to each other, + * hence we order this table by pad control registers (which all pads + * have) and put the optional i/o routing registers into additional + * fields. + * + * The naming convention for the pad modes is MX35_PAD___ + * If or refers to a GPIO, it is named + * GPIO__ + * + */ + +struct pad_desc { + unsigned mux_ctrl_ofs:12; /* IOMUXC_SW_MUX_CTL_PAD offset */ + unsigned mux_mode:8; + unsigned pad_ctrl_ofs:12; /* IOMUXC_SW_PAD_CTRL offset */ +#define NO_PAD_CTRL (1 << 16) + unsigned pad_ctrl:17; + unsigned select_input_ofs:12; /* IOMUXC_SELECT_INPUT offset */ + unsigned select_input:3; +}; + +#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \ + _select_input, _pad_ctrl) \ + { \ + .mux_ctrl_ofs = _mux_ctrl_ofs, \ + .mux_mode = _mux_mode, \ + .pad_ctrl_ofs = _pad_ctrl_ofs, \ + .pad_ctrl = _pad_ctrl, \ + .select_input_ofs = _select_input_ofs, \ + .select_input = _select_input, \ + } + +/* + * Use to set PAD control + */ +#define PAD_CTL_DRIVE_VOLTAGE_3_3_V 0 +#define PAD_CTL_DRIVE_VOLTAGE_1_8_V 1 + +#define PAD_CTL_NO_HYSTERESIS 0 +#define PAD_CTL_HYSTERESIS 1 + +#define PAD_CTL_PULL_DISABLED 0x0 +#define PAD_CTL_PULL_KEEPER 0xa +#define PAD_CTL_PULL_DOWN_100K 0xc +#define PAD_CTL_PULL_UP_47K 0xd +#define PAD_CTL_PULL_UP_100K 0xe +#define PAD_CTL_PULL_UP_22K 0xf + +#define PAD_CTL_OUTPUT_CMOS 0 +#define PAD_CTL_OUTPUT_OPEN_DRAIN 1 + +#define PAD_CTL_DRIVE_STRENGTH_NORM 0 +#define PAD_CTL_DRIVE_STRENGTH_HIGH 1 +#define PAD_CTL_DRIVE_STRENGTH_MAX 2 + +#define PAD_CTL_SLEW_RATE_SLOW 0 +#define PAD_CTL_SLEW_RATE_FAST 1 + +/* + * setups a single pad: + * - reserves the pad so that it is not claimed by another driver + * - setups the iomux according to the configuration + */ +int mxc_iomux_v3_setup_pad(struct pad_desc *pad); + +/* + * setups mutliple pads + * convenient way to call the above function with tables + */ +int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count); + +/* + * releases a single pad: + * - make it available for a future use by another driver + * - DOES NOT reconfigure the IOMUX in its reset state + */ +void mxc_iomux_v3_release_pad(struct pad_desc *pad); + +/* + * releases multiple pads + * convenvient way to call the above function with tables + */ +void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count); + +#endif /* __MACH_IOMUX_V3_H__*/ + diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/memory.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/memory.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/memory.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/memory.h 2009-05-13 09:46:19.000000000 +0200 @@ -32,4 +32,12 @@ #define CONSISTENT_DMA_SIZE SZ_4M #endif /* CONFIG_MX1_VIDEO */ +#if defined(CONFIG_MX3_VIDEO) +/* + * Increase size of DMA-consistent memory region. + * This is required for mx3 camera driver to capture at least two QXGA frames. + */ +#define CONSISTENT_DMA_SIZE SZ_8M +#endif /* CONFIG_MX3_VIDEO */ + #endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/mx1.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/mx1.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/mx1.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/mx1.h 2009-05-13 09:46:19.000000000 +0200 @@ -179,7 +179,7 @@ #define DMA_REQ_UART1_T 30 #define DMA_REQ_UART1_R 31 -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR IO_ADDRESS(UART1_BASE_ADDR) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/mxc_timer.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/mxc_timer.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/mxc_timer.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/mxc_timer.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,158 +0,0 @@ -/* - * mxc_timer.h - * - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef __PLAT_MXC_TIMER_H -#define __PLAT_MXC_TIMER_H - -#include -#include - -#ifdef CONFIG_ARCH_MX1 -#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR) -#define TIMER_INTERRUPT TIM1_INT - -#define TCTL_VAL TCTL_CLK_PCLK1 -#define TCTL_IRQEN (1<<4) -#define TCTL_FRR (1<<8) -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_4 (2<<1) -#define TCTL_CLK_TIN (3<<1) -#define TCTL_CLK_32 (4<<1) - -#define MXC_TCTL 0x00 -#define MXC_TPRER 0x04 -#define MXC_TCMP 0x08 -#define MXC_TCR 0x0c -#define MXC_TCN 0x10 -#define MXC_TSTAT 0x14 -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -static inline void gpt_irq_disable(void) -{ - unsigned int tmp; - - tmp = __raw_readl(TIMER_BASE + MXC_TCTL); - __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, - TIMER_BASE + MXC_TCTL); -} - -static void gpt_irq_acknowledge(void) -{ - __raw_writel(0, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX1 */ - -#ifdef CONFIG_ARCH_MX2 -#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) -#define TIMER_INTERRUPT MXC_INT_GPT1 - -#define MXC_TCTL 0x00 -#define TCTL_VAL TCTL_CLK_PCLK1 -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_4 (2<<1) -#define TCTL_IRQEN (1<<4) -#define TCTL_FRR (1<<8) -#define MXC_TPRER 0x04 -#define MXC_TCMP 0x08 -#define MXC_TCR 0x0c -#define MXC_TCN 0x10 -#define MXC_TSTAT 0x14 -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -static inline void gpt_irq_disable(void) -{ - unsigned int tmp; - - tmp = __raw_readl(TIMER_BASE + MXC_TCTL); - __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, - TIMER_BASE + MXC_TCTL); -} - -static void gpt_irq_acknowledge(void) -{ - __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX2 */ - -#ifdef CONFIG_ARCH_MX3 -#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) -#define TIMER_INTERRUPT MXC_INT_GPT - -#define MXC_TCTL 0x00 -#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN) -#define TCTL_CLK_IPG (1<<6) -#define TCTL_FRR (1<<9) -#define TCTL_WAITEN (1<<3) - -#define MXC_TPRER 0x04 -#define MXC_TSTAT 0x08 -#define TSTAT_OF1 (1<<0) -#define TSTAT_OF2 (1<<1) -#define TSTAT_OF3 (1<<2) -#define TSTAT_IF1 (1<<3) -#define TSTAT_IF2 (1<<4) -#define TSTAT_ROV (1<<5) -#define MXC_IR 0x0c -#define MXC_TCMP 0x10 -#define MXC_TCMP2 0x14 -#define MXC_TCMP3 0x18 -#define MXC_TCR 0x1c -#define MXC_TCN 0x24 - -static inline void gpt_irq_disable(void) -{ - __raw_writel(0, TIMER_BASE + MXC_IR); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(1<<0, TIMER_BASE + MXC_IR); -} - -static inline void gpt_irq_acknowledge(void) -{ - __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX3 */ - -#define TCTL_SWR (1<<15) -#define TCTL_CC (1<<10) -#define TCTL_OM (1<<9) -#define TCTL_CAP_RIS (1<<6) -#define TCTL_CAP_FAL (2<<6) -#define TCTL_CAP_RIS_FAL (3<<6) -#define TCTL_CAP_ENA (1<<5) -#define TCTL_TEN (1<<0) - -#endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/usb.h linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/usb.h --- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/usb.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/include/mach/usb.h 2009-05-13 09:46:19.000000000 +0200 @@ -17,7 +17,7 @@ struct imxusb_platform_data { int (*init)(struct device *); - int (*exit)(struct device *); + void (*exit)(struct device *); }; #endif /* __ASM_ARCH_MXC_USB */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/iomux-v3.c linux-2.6.30-rc4-git/arch/arm/plat-mxc/iomux-v3.c --- linux-2.6.30-rc4/arch/arm/plat-mxc/iomux-v3.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/iomux-v3.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,98 @@ +/* + * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR) + +static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG]; + +/* + * setups a single pin: + * - reserves the pin so that it is not claimed by another driver + * - setups the iomux according to the configuration + */ +int mxc_iomux_v3_setup_pad(struct pad_desc *pad) +{ + unsigned int pad_ofs = pad->pad_ctrl_ofs; + + if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map)) + return -EBUSY; + if (pad->mux_ctrl_ofs) + __raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs); + + if (pad->select_input_ofs) + __raw_writel(pad->select_input, + IOMUX_BASE + pad->select_input_ofs); + + if (!(pad->pad_ctrl & NO_PAD_CTRL)) + __raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs); + return 0; +} +EXPORT_SYMBOL(mxc_iomux_v3_setup_pad); + +int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count) +{ + struct pad_desc *p = pad_list; + int i; + int ret; + + for (i = 0; i < count; i++) { + ret = mxc_iomux_v3_setup_pad(p); + if (ret) + goto setup_error; + p++; + } + return 0; + +setup_error: + mxc_iomux_v3_release_multiple_pads(pad_list, i); + return ret; +} +EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads); + +void mxc_iomux_v3_release_pad(struct pad_desc *pad) +{ + unsigned int pad_ofs = pad->pad_ctrl_ofs; + + clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map); +} +EXPORT_SYMBOL(mxc_iomux_v3_release_pad); + +void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count) +{ + struct pad_desc *p = pad_list; + int i; + + for (i = 0; i < count; i++) { + mxc_iomux_v3_release_pad(p); + p++; + } +} +EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/irq.c linux-2.6.30-rc4-git/arch/arm/plat-mxc/irq.c --- linux-2.6.30-rc4/arch/arm/plat-mxc/irq.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/irq.c 2009-05-13 09:46:19.000000000 +0200 @@ -24,31 +24,27 @@ #include #include -#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR) -#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */ -#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */ -#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */ -#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */ -#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */ -#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */ -#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */ -#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */ -#define AVIC_NIPRIORITY(x) (AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */ -#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */ -#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */ -#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */ -#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */ -#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */ -#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */ -#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */ -#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */ -#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */ -#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */ - -#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20) -#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24) -#define IIM_PROD_REV_SH 3 -#define IIM_PROD_REV_LEN 5 +#define AVIC_INTCNTL 0x00 /* int control reg */ +#define AVIC_NIMASK 0x04 /* int mask reg */ +#define AVIC_INTENNUM 0x08 /* int enable number reg */ +#define AVIC_INTDISNUM 0x0C /* int disable number reg */ +#define AVIC_INTENABLEH 0x10 /* int enable reg high */ +#define AVIC_INTENABLEL 0x14 /* int enable reg low */ +#define AVIC_INTTYPEH 0x18 /* int type reg high */ +#define AVIC_INTTYPEL 0x1C /* int type reg low */ +#define AVIC_NIPRIORITY(x) (0x20 + 4 * (7 - (x))) /* int priority */ +#define AVIC_NIVECSR 0x40 /* norm int vector/status */ +#define AVIC_FIVECSR 0x44 /* fast int vector/status */ +#define AVIC_INTSRCH 0x48 /* int source reg high */ +#define AVIC_INTSRCL 0x4C /* int source reg low */ +#define AVIC_INTFRCH 0x50 /* int force reg high */ +#define AVIC_INTFRCL 0x54 /* int force reg low */ +#define AVIC_NIPNDH 0x58 /* norm int pending high */ +#define AVIC_NIPNDL 0x5C /* norm int pending low */ +#define AVIC_FIPNDH 0x60 /* fast int pending high */ +#define AVIC_FIPNDL 0x64 /* fast int pending low */ + +static void __iomem *avic_base; int imx_irq_set_priority(unsigned char irq, unsigned char prio) { @@ -59,11 +55,11 @@ int imx_irq_set_priority(unsigned char i if (irq >= MXC_INTERNAL_IRQS) return -EINVAL;; - temp = __raw_readl(AVIC_NIPRIORITY(irq / 8)); + temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8)); temp &= ~mask; temp |= prio & mask; - __raw_writel(temp, AVIC_NIPRIORITY(irq / 8)); + __raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8)); return 0; #else @@ -81,12 +77,12 @@ int mxc_set_irq_fiq(unsigned int irq, un return -EINVAL; if (irq < MXC_INTERNAL_IRQS / 2) { - irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL); + irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq); + __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL); } else { irq -= MXC_INTERNAL_IRQS / 2; - irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH); + irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq); + __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH); } return 0; @@ -97,13 +93,13 @@ EXPORT_SYMBOL(mxc_set_irq_fiq); /* Disable interrupt number "irq" in the AVIC */ static void mxc_mask_irq(unsigned int irq) { - __raw_writel(irq, AVIC_INTDISNUM); + __raw_writel(irq, avic_base + AVIC_INTDISNUM); } /* Enable interrupt number "irq" in the AVIC */ static void mxc_unmask_irq(unsigned int irq) { - __raw_writel(irq, AVIC_INTENNUM); + __raw_writel(irq, avic_base + AVIC_INTENNUM); } static struct irq_chip mxc_avic_chip = { @@ -121,19 +117,21 @@ void __init mxc_init_irq(void) { int i; + avic_base = IO_ADDRESS(AVIC_BASE_ADDR); + /* put the AVIC into the reset value with * all interrupts disabled */ - __raw_writel(0, AVIC_INTCNTL); - __raw_writel(0x1f, AVIC_NIMASK); + __raw_writel(0, avic_base + AVIC_INTCNTL); + __raw_writel(0x1f, avic_base + AVIC_NIMASK); /* disable all interrupts */ - __raw_writel(0, AVIC_INTENABLEH); - __raw_writel(0, AVIC_INTENABLEL); + __raw_writel(0, avic_base + AVIC_INTENABLEH); + __raw_writel(0, avic_base + AVIC_INTENABLEL); /* all IRQ no FIQ */ - __raw_writel(0, AVIC_INTTYPEH); - __raw_writel(0, AVIC_INTTYPEL); + __raw_writel(0, avic_base + AVIC_INTTYPEH); + __raw_writel(0, avic_base + AVIC_INTTYPEL); for (i = 0; i < MXC_INTERNAL_IRQS; i++) { set_irq_chip(i, &mxc_avic_chip); set_irq_handler(i, handle_level_irq); @@ -142,7 +140,7 @@ void __init mxc_init_irq(void) /* Set default priority value (0) for all IRQ's */ for (i = 0; i < 8; i++) - __raw_writel(0, AVIC_NIPRIORITY(i)); + __raw_writel(0, avic_base + AVIC_NIPRIORITY(i)); /* init architectures chained interrupt handler */ mxc_register_gpios(); @@ -154,3 +152,4 @@ void __init mxc_init_irq(void) printk(KERN_INFO "MXC IRQ initialized\n"); } + diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/Kconfig linux-2.6.30-rc4-git/arch/arm/plat-mxc/Kconfig --- linux-2.6.30-rc4/arch/arm/plat-mxc/Kconfig 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/Kconfig 2009-05-13 09:46:19.000000000 +0200 @@ -48,7 +48,14 @@ config MXC_IRQ_PRIOR config MXC_PWM tristate "Enable PWM driver" depends on ARCH_MXC + select HAVE_PWM help Enable support for the i.MX PWM controller(s). +config ARCH_HAS_RNGA + bool + depends on ARCH_MXC + +config ARCH_MXC_IOMUX_V3 + bool endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/Makefile linux-2.6.30-rc4-git/arch/arm/plat-mxc/Makefile --- linux-2.6.30-rc4/arch/arm/plat-mxc/Makefile 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/Makefile 2009-05-13 09:46:19.000000000 +0200 @@ -7,4 +7,5 @@ obj-y := irq.o clock.o gpio.o time.o dev obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o +obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_PWM) += pwm.o diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/pwm.c linux-2.6.30-rc4-git/arch/arm/plat-mxc/pwm.c --- linux-2.6.30-rc4/arch/arm/plat-mxc/pwm.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/pwm.c 2009-05-13 09:46:19.000000000 +0200 @@ -15,65 +15,26 @@ #include #include #include +#include + + +/* i.MX1 and i.MX21 share the same PWM function block: */ + +#define MX1_PWMC 0x00 /* PWM Control Register */ +#define MX1_PWMS 0x04 /* PWM Sample Register */ +#define MX1_PWMP 0x08 /* PWM Period Register */ + + +/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */ + +#define MX3_PWMCR 0x00 /* PWM Control Register */ +#define MX3_PWMSAR 0x0C /* PWM Sample Register */ +#define MX3_PWMPR 0x10 /* PWM Period Register */ +#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) +#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) +#define MX3_PWMCR_EN (1 << 0) -#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21 -#define PWM_VER_1 -#define PWMCR 0x00 /* PWM Control Register */ -#define PWMSR 0x04 /* PWM Sample Register */ -#define PWMPR 0x08 /* PWM Period Register */ -#define PWMCNR 0x0C /* PWM Counter Register */ - -#define PWMCR_HCTR (1 << 18) /* Halfword FIFO Data Swapping */ -#define PWMCR_BCTR (1 << 17) /* Byte FIFO Data Swapping */ -#define PWMCR_SWR (1 << 16) /* Software Reset */ -#define PWMCR_CLKSRC_PERCLK (0 << 15) /* PERCLK Clock Source */ -#define PWMCR_CLKSRC_CLK32 (1 << 15) /* 32KHz Clock Source */ -#define PWMCR_PRESCALER(x) (((x - 1) & 0x7F) << 8) /* PRESCALER */ -#define PWMCR_IRQ (1 << 7) /* Interrupt Request */ -#define PWMCR_IRQEN (1 << 6) /* Interrupt Request Enable */ -#define PWMCR_FIFOAV (1 << 5) /* FIFO Available */ -#define PWMCR_EN (1 << 4) /* Enables/Disables the PWM */ -#define PWMCR_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */ -#define PWMCR_DIV(x) (((x) & 0x03) << 0) /* Clock divider 2/4/8/16 */ - -#define MAX_DIV (128 * 16) -#endif - -#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31 -#define PWM_VER_2 - -#define PWMCR 0x00 /* PWM Control Register */ -#define PWMSR 0x04 /* PWM Status Register */ -#define PWMIR 0x08 /* PWM Interrupt Register */ -#define PWMSAR 0x0C /* PWM Sample Register */ -#define PWMPR 0x10 /* PWM Period Register */ -#define PWMCNR 0x14 /* PWM Counter Register */ - -#define PWMCR_EN (1 << 0) /* Enables/Disables the PWM */ -#define PWMCR_REPEAT(x) (((x) & 0x03) << 1) /* Sample Repeats */ -#define PWMCR_SWR (1 << 3) /* Software Reset */ -#define PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)/* PRESCALER */ -#define PWMCR_CLKSRC(x) (((x) & 0x3) << 16) -#define PWMCR_CLKSRC_OFF (0 << 16) -#define PWMCR_CLKSRC_IPG (1 << 16) -#define PWMCR_CLKSRC_IPG_HIGH (2 << 16) -#define PWMCR_CLKSRC_CLK32 (3 << 16) -#define PWMCR_POUTC -#define PWMCR_HCTR (1 << 20) /* Halfword FIFO Data Swapping */ -#define PWMCR_BCTR (1 << 21) /* Byte FIFO Data Swapping */ -#define PWMCR_DBGEN (1 << 22) /* Debug Mode */ -#define PWMCR_WAITEN (1 << 23) /* Wait Mode */ -#define PWMCR_DOZEN (1 << 24) /* Doze Mode */ -#define PWMCR_STOPEN (1 << 25) /* Stop Mode */ -#define PWMCR_FWM(x) (((x) & 0x3) << 26) /* FIFO Water Mark */ - -#define MAX_DIV 4096 -#endif - -#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */ -#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */ -#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */ struct pwm_device { struct list_head node; @@ -91,32 +52,52 @@ struct pwm_device { int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) { - unsigned long long c; - unsigned long period_cycles, duty_cycles, prescale; - if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) return -EINVAL; - c = clk_get_rate(pwm->clk); - c = c * period_ns; - do_div(c, 1000000000); - period_cycles = c; - - prescale = period_cycles / 0x10000 + 1; - - period_cycles /= prescale; - c = (unsigned long long)period_cycles * duty_ns; - do_div(c, period_ns); - duty_cycles = c; - -#ifdef PWM_VER_2 - writel(duty_cycles, pwm->mmio_base + PWMSAR); - writel(period_cycles, pwm->mmio_base + PWMPR); - writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN, - pwm->mmio_base + PWMCR); -#elif defined PWM_VER_1 -#error PWM not yet working on MX1 / MX21 -#endif + if (cpu_is_mx27() || cpu_is_mx3()) { + unsigned long long c; + unsigned long period_cycles, duty_cycles, prescale; + c = clk_get_rate(pwm->clk); + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + prescale = period_cycles / 0x10000 + 1; + + period_cycles /= prescale; + c = (unsigned long long)period_cycles * duty_ns; + do_div(c, period_ns); + duty_cycles = c; + + writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR); + writel(period_cycles, pwm->mmio_base + MX3_PWMPR); + writel(MX3_PWMCR_PRESCALER(prescale - 1) | + MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN, + pwm->mmio_base + MX3_PWMCR); + } else if (cpu_is_mx1() || cpu_is_mx21()) { + /* The PWM subsystem allows for exact frequencies. However, + * I cannot connect a scope on my device to the PWM line and + * thus cannot provide the program the PWM controller + * exactly. Instead, I'm relying on the fact that the + * Bootloader (u-boot or WinCE+haret) has programmed the PWM + * function group already. So I'll just modify the PWM sample + * register to follow the ratio of duty_ns vs. period_ns + * accordingly. + * + * This is good enought for programming the brightness of + * the LCD backlight. + * + * The real implementation would divide PERCLK[0] first by + * both the prescaler (/1 .. /128) and then by CLKSEL + * (/2 .. /16). + */ + u32 max = readl(pwm->mmio_base + MX1_PWMP); + u32 p = max * duty_ns / period_ns; + writel(max - p, pwm->mmio_base + MX1_PWMS); + } else { + BUG(); + } return 0; } @@ -297,4 +278,3 @@ module_exit(mxc_pwm_exit); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Sascha Hauer "); - diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-mxc/time.c linux-2.6.30-rc4-git/arch/arm/plat-mxc/time.c --- linux-2.6.30-rc4/arch/arm/plat-mxc/time.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-mxc/time.c 2009-05-13 09:46:19.000000000 +0200 @@ -29,22 +29,85 @@ #include #include #include -#include + +/* defines common for all i.MX */ +#define MXC_TCTL 0x00 +#define MXC_TCTL_TEN (1 << 0) +#define MXC_TPRER 0x04 + +/* MX1, MX21, MX27 */ +#define MX1_2_TCTL_CLK_PCLK1 (1 << 1) +#define MX1_2_TCTL_IRQEN (1 << 4) +#define MX1_2_TCTL_FRR (1 << 8) +#define MX1_2_TCMP 0x08 +#define MX1_2_TCN 0x10 +#define MX1_2_TSTAT 0x14 + +/* MX21, MX27 */ +#define MX2_TSTAT_CAPT (1 << 1) +#define MX2_TSTAT_COMP (1 << 0) + +/* MX31, MX35 */ +#define MX3_TCTL_WAITEN (1 << 3) +#define MX3_TCTL_CLK_IPG (1 << 6) +#define MX3_TCTL_FRR (1 << 9) +#define MX3_IR 0x0c +#define MX3_TSTAT 0x08 +#define MX3_TSTAT_OF1 (1 << 0) +#define MX3_TCN 0x24 +#define MX3_TCMP 0x10 static struct clock_event_device clockevent_mxc; static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; -/* clock source */ +static void __iomem *timer_base; -static cycle_t mxc_get_cycles(struct clocksource *cs) +static inline void gpt_irq_disable(void) { - return __raw_readl(TIMER_BASE + MXC_TCN); + unsigned int tmp; + + if (cpu_is_mx3()) + __raw_writel(0, timer_base + MX3_IR); + else { + tmp = __raw_readl(timer_base + MXC_TCTL); + __raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL); + } +} + +static inline void gpt_irq_enable(void) +{ + if (cpu_is_mx3()) + __raw_writel(1<<0, timer_base + MX3_IR); + else { + __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN, + timer_base + MXC_TCTL); + } +} + +static void gpt_irq_acknowledge(void) +{ + if (cpu_is_mx1()) + __raw_writel(0, timer_base + MX1_2_TSTAT); + if (cpu_is_mx2()) + __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT); + if (cpu_is_mx3()) + __raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT); +} + +static cycle_t mx1_2_get_cycles(struct clocksource *cs) +{ + return __raw_readl(timer_base + MX1_2_TCN); +} + +static cycle_t mx3_get_cycles(struct clocksource *cs) +{ + return __raw_readl(timer_base + MX3_TCN); } static struct clocksource clocksource_mxc = { .name = "mxc_timer1", .rating = 200, - .read = mxc_get_cycles, + .read = mx1_2_get_cycles, .mask = CLOCKSOURCE_MASK(32), .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, @@ -54,6 +117,9 @@ static int __init mxc_clocksource_init(s { unsigned int c = clk_get_rate(timer_clk); + if (cpu_is_mx3()) + clocksource_mxc.read = mx3_get_cycles; + clocksource_mxc.mult = clocksource_hz2mult(c, clocksource_mxc.shift); clocksource_register(&clocksource_mxc); @@ -63,15 +129,29 @@ static int __init mxc_clocksource_init(s /* clock event */ -static int mxc_set_next_event(unsigned long evt, +static int mx1_2_set_next_event(unsigned long evt, struct clock_event_device *unused) { unsigned long tcmp; - tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt; - __raw_writel(tcmp, TIMER_BASE + MXC_TCMP); + tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt; - return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ? + __raw_writel(tcmp, timer_base + MX1_2_TCMP); + + return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ? + -ETIME : 0; +} + +static int mx3_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long tcmp; + + tcmp = __raw_readl(timer_base + MX3_TCN) + evt; + + __raw_writel(tcmp, timer_base + MX3_TCMP); + + return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ? -ETIME : 0; } @@ -100,8 +180,13 @@ static void mxc_set_mode(enum clock_even if (mode != clockevent_mode) { /* Set event time into far-far future */ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3, - TIMER_BASE + MXC_TCMP); + if (cpu_is_mx3()) + __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3, + timer_base + MX3_TCMP); + else + __raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3, + timer_base + MX1_2_TCMP); + /* Clear pending interrupt */ gpt_irq_acknowledge(); } @@ -148,7 +233,10 @@ static irqreturn_t mxc_timer_interrupt(i struct clock_event_device *evt = &clockevent_mxc; uint32_t tstat; - tstat = __raw_readl(TIMER_BASE + MXC_TSTAT); + if (cpu_is_mx3()) + tstat = __raw_readl(timer_base + MX3_TSTAT); + else + tstat = __raw_readl(timer_base + MX1_2_TSTAT); gpt_irq_acknowledge(); @@ -168,7 +256,7 @@ static struct clock_event_device clockev .features = CLOCK_EVT_FEAT_ONESHOT, .shift = 32, .set_mode = mxc_set_mode, - .set_next_event = mxc_set_next_event, + .set_next_event = mx1_2_set_next_event, .rating = 200, }; @@ -176,6 +264,9 @@ static int __init mxc_clockevent_init(st { unsigned int c = clk_get_rate(timer_clk); + if (cpu_is_mx3()) + clockevent_mxc.set_next_event = mx3_set_next_event; + clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC, clockevent_mxc.shift); clockevent_mxc.max_delta_ns = @@ -192,23 +283,47 @@ static int __init mxc_clockevent_init(st void __init mxc_timer_init(struct clk *timer_clk) { + uint32_t tctl_val; + int irq; + clk_enable(timer_clk); + if (cpu_is_mx1()) { +#ifdef CONFIG_ARCH_MX1 + timer_base = IO_ADDRESS(TIM1_BASE_ADDR); + irq = TIM1_INT; +#endif + } else if (cpu_is_mx2()) { +#ifdef CONFIG_ARCH_MX2 + timer_base = IO_ADDRESS(GPT1_BASE_ADDR); + irq = MXC_INT_GPT1; +#endif + } else if (cpu_is_mx3()) { +#ifdef CONFIG_ARCH_MX3 + timer_base = IO_ADDRESS(GPT1_BASE_ADDR); + irq = MXC_INT_GPT; +#endif + } else + BUG(); + /* * Initialise to a known state (all timers off, and timing reset) */ - __raw_writel(0, TIMER_BASE + MXC_TCTL); - __raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */ - __raw_writel(TCTL_FRR | /* free running */ - TCTL_VAL | /* set clocksource and arch specific bits */ - TCTL_TEN, /* start the timer */ - TIMER_BASE + MXC_TCTL); + __raw_writel(0, timer_base + MXC_TCTL); + __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ + + if (cpu_is_mx3()) + tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN; + else + tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; + + __raw_writel(tctl_val, timer_base + MXC_TCTL); /* init and register the timer to the framework */ mxc_clocksource_init(timer_clk); mxc_clockevent_init(timer_clk); /* Make irqs happen */ - setup_irq(TIMER_INTERRUPT, &mxc_timer_irq); + setup_irq(irq, &mxc_timer_irq); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-omap/clock.c linux-2.6.30-rc4-git/arch/arm/plat-omap/clock.c --- linux-2.6.30-rc4/arch/arm/plat-omap/clock.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-omap/clock.c 2009-05-13 09:46:19.000000000 +0200 @@ -239,6 +239,13 @@ void recalculate_root_clocks(void) } } +/** + * clk_init_one - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ void clk_init_one(struct clk *clk) { INIT_LIST_HEAD(&clk->children); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-omap/dma.c linux-2.6.30-rc4-git/arch/arm/plat-omap/dma.c --- linux-2.6.30-rc4/arch/arm/plat-omap/dma.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-omap/dma.c 2009-05-13 09:46:19.000000000 +0200 @@ -760,19 +760,12 @@ void omap_free_dma(int lch) { unsigned long flags; - spin_lock_irqsave(&dma_chan_lock, flags); if (dma_chan[lch].dev_id == -1) { pr_err("omap_dma: trying to free unallocated DMA channel %d\n", lch); - spin_unlock_irqrestore(&dma_chan_lock, flags); return; } - dma_chan[lch].dev_id = -1; - dma_chan[lch].next_lch = -1; - dma_chan[lch].callback = NULL; - spin_unlock_irqrestore(&dma_chan_lock, flags); - if (cpu_class_is_omap1()) { /* Disable all DMA interrupts for the channel. */ dma_write(0, CICR(lch)); @@ -798,6 +791,12 @@ void omap_free_dma(int lch) dma_write(0, CCR(lch)); omap_clear_dma(lch); } + + spin_lock_irqsave(&dma_chan_lock, flags); + dma_chan[lch].dev_id = -1; + dma_chan[lch].next_lch = -1; + dma_chan[lch].callback = NULL; + spin_unlock_irqrestore(&dma_chan_lock, flags); } EXPORT_SYMBOL(omap_free_dma); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-omap/dmtimer.c linux-2.6.30-rc4-git/arch/arm/plat-omap/dmtimer.c --- linux-2.6.30-rc4/arch/arm/plat-omap/dmtimer.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-omap/dmtimer.c 2009-05-13 09:46:19.000000000 +0200 @@ -238,7 +238,7 @@ static struct omap_dm_timer omap3_dm_tim { .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 }, { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 }, { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 }, - { .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 }, + { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ }, }; static const char *omap3_dm_source_names[] __initdata = { @@ -321,11 +321,9 @@ static void omap_dm_timer_reset(struct o l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ /* - * Enable wake-up only for GPT1 on OMAP2 CPUs. - * FIXME: All timers should have wake-up enabled and clear - * PRCM status. + * Enable wake-up on OMAP2 CPUs. */ - if (cpu_class_is_omap2() && (timer == &dm_timers[0])) + if (cpu_class_is_omap2()) l |= 1 << 2; omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l); @@ -511,7 +509,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop); #ifdef CONFIG_ARCH_OMAP1 -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { int n = (timer - dm_timers) << 1; u32 l; @@ -519,23 +517,31 @@ void omap_dm_timer_set_source(struct oma l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); l |= source << n; omap_writel(l, MOD_CONF_CTRL_1); + + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); #else -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { + int ret = -EINVAL; + if (source < 0 || source >= 3) - return; + return -EINVAL; clk_disable(timer->fclk); - clk_set_parent(timer->fclk, dm_source_clocks[source]); + ret = clk_set_parent(timer->fclk, dm_source_clocks[source]); clk_enable(timer->fclk); - /* When the functional clock disappears, too quick writes seem to - * cause an abort. */ + /* + * When the functional clock disappears, too quick writes seem + * to cause an abort. XXX Is this still necessary? + */ __delay(150000); + + return ret; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-omap/gpio.c linux-2.6.30-rc4-git/arch/arm/plat-omap/gpio.c --- linux-2.6.30-rc4/arch/arm/plat-omap/gpio.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-omap/gpio.c 2009-05-13 09:46:19.000000000 +0200 @@ -758,8 +758,12 @@ static void _clear_gpio_irqbank(struct g /* Workaround for clearing DSP GPIO interrupts to allow retention */ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; if (cpu_is_omap24xx() || cpu_is_omap34xx()) - __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2); + __raw_writel(gpio_mask, reg); + + /* Flush posted write for the irq status to avoid spurious interrupts */ + __raw_readl(reg); #endif } @@ -921,13 +925,10 @@ static int _set_gpio_wakeup(struct gpio_ case METHOD_MPUIO: case METHOD_GPIO_1610: spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif @@ -940,13 +941,10 @@ static int _set_gpio_wakeup(struct gpio_ return -EINVAL; } spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-omap/include/mach/dmtimer.h linux-2.6.30-rc4-git/arch/arm/plat-omap/include/mach/dmtimer.h --- linux-2.6.30-rc4/arch/arm/plat-omap/include/mach/dmtimer.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-omap/include/mach/dmtimer.h 2009-05-13 09:46:19.000000000 +0200 @@ -64,7 +64,7 @@ void omap_dm_timer_trigger(struct omap_d void omap_dm_timer_start(struct omap_dm_timer *timer); void omap_dm_timer_stop(struct omap_dm_timer *timer); -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-omap/include/mach/eac.h linux-2.6.30-rc4-git/arch/arm/plat-omap/include/mach/eac.h --- linux-2.6.30-rc4/arch/arm/plat-omap/include/mach/eac.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-omap/include/mach/eac.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,100 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach2/eac.h - * - * Defines for Enhanced Audio Controller - * - * Contact: Jarkko Nikula - * - * Copyright (C) 2006 Nokia Corporation - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H -#define __ASM_ARM_ARCH_OMAP2_EAC_H - -#include -#include -#include - -#include - -/* master codec clock source */ -#define EAC_MCLK_EXT_MASK 0x100 -enum eac_mclk_src { - EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */ - EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK, - EAC_MCLK_EXT_12288000, - EAC_MCLK_EXT_2x11289600, - EAC_MCLK_EXT_2x12288000, -}; - -/* codec port interface mode */ -enum eac_codec_mode { - EAC_CODEC_PCM, - EAC_CODEC_AC97, - EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */ - EAC_CODEC_I2S_SLAVE, -}; - -/* configuration structure for I2S mode */ -struct eac_i2s_conf { - /* if enabled, then first data slot (left channel) is signaled as - * positive level of frame sync EAC.AC_FS */ - unsigned polarity_changed_mode:1; - /* if enabled, then serial data starts one clock cycle after the - * of EAC.AC_FS for first audio slot */ - unsigned sync_delay_enable:1; -}; - -/* configuration structure for EAC codec port */ -struct eac_codec { - enum eac_mclk_src mclk_src; - - enum eac_codec_mode codec_mode; - union { - struct eac_i2s_conf i2s; - } codec_conf; - - int default_rate; /* audio sampling rate */ - - int (* set_power)(void *private_data, int dac, int adc); - int (* register_controls)(void *private_data, - struct snd_card *card); - const char *short_name; - - void *private_data; -}; - -/* structure for passing platform dependent data to the EAC driver */ -struct eac_platform_data { - int (* init)(struct device *eac_dev); - void (* cleanup)(struct device *eac_dev); - /* these callbacks are used to configure & control external MCLK - * source. NULL if not used */ - int (* enable_ext_clocks)(struct device *eac_dev); - void (* disable_ext_clocks)(struct device *eac_dev); -}; - -extern void omap_init_eac(struct eac_platform_data *pdata); - -extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec); -extern void eac_unregister_codec(struct device *eac_dev); - -extern int eac_set_mode(struct device *eac_dev, int play, int rec); - -#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-omap/include/mach/gpioexpander.h linux-2.6.30-rc4-git/arch/arm/plat-omap/include/mach/gpioexpander.h --- linux-2.6.30-rc4/arch/arm/plat-omap/include/mach/gpioexpander.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-omap/include/mach/gpioexpander.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,35 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpioexpander.h - * - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This package is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H -#define __ASM_ARCH_OMAP_GPIOEXPANDER_H - -/* Function Prototypes for GPIO Expander functions */ - -#ifdef CONFIG_GPIOEXPANDER_OMAP -int read_gpio_expa(u8 *, int); -int write_gpio_expa(u8 , int); -#else -static inline int read_gpio_expa(u8 *val, int addr) -{ - return 0; -} -static inline int write_gpio_expa(u8 val, int addr) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-omap/include/mach/irda.h linux-2.6.30-rc4-git/arch/arm/plat-omap/include/mach/irda.h --- linux-2.6.30-rc4/arch/arm/plat-omap/include/mach/irda.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-omap/include/mach/irda.h 2009-05-13 09:46:19.000000000 +0200 @@ -21,10 +21,6 @@ struct omap_irda_config { int transceiver_cap; int (*transceiver_mode)(struct device *dev, int mode); int (*select_irda)(struct device *dev, int state); - /* Very specific to the needs of some platforms (h3,h4) - * having calls which can sleep in irda_set_speed. - */ - struct delayed_work gpio_expa; int rx_channel; int tx_channel; unsigned long dest_start; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-omap/include/mach/mmc.h linux-2.6.30-rc4-git/arch/arm/plat-omap/include/mach/mmc.h --- linux-2.6.30-rc4/arch/arm/plat-omap/include/mach/mmc.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-omap/include/mach/mmc.h 2009-05-13 09:46:19.000000000 +0200 @@ -79,7 +79,6 @@ struct omap_mmc_platform_data { /* use the internal clock */ unsigned internal_clock:1; - s16 power_pin; int switch_pin; /* gpio (card detect) */ int gpio_wp; /* gpio (write protect) */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-omap/include/mach/timer-gp.h linux-2.6.30-rc4-git/arch/arm/plat-omap/include/mach/timer-gp.h --- linux-2.6.30-rc4/arch/arm/plat-omap/include/mach/timer-gp.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/arch/arm/plat-omap/include/mach/timer-gp.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,17 @@ +/* + * OMAP2/3 GPTIMER support.headers + * + * Copyright (C) 2009 Nokia Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H + +int __init omap2_gp_clockevent_set_gptimer(u8 id); + +#endif + diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/arm/plat-pxa/gpio.c linux-2.6.30-rc4-git/arch/arm/plat-pxa/gpio.c --- linux-2.6.30-rc4/arch/arm/plat-pxa/gpio.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/arm/plat-pxa/gpio.c 2009-05-13 09:46:19.000000000 +0200 @@ -121,6 +121,8 @@ static int __init pxa_init_gpio_chip(int return -ENOMEM; } + memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip)); + for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { struct gpio_chip *c = &chips[i].chip; @@ -143,6 +145,21 @@ static int __init pxa_init_gpio_chip(int return 0; } +/* Update only those GRERx and GFERx edge detection register bits if those + * bits are set in c->irq_mask + */ +static inline void update_edge_detect(struct pxa_gpio_chip *c) +{ + uint32_t grer, gfer; + + grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask; + gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask; + grer |= c->irq_edge_rise & c->irq_mask; + gfer |= c->irq_edge_fall & c->irq_mask; + __raw_writel(grer, c->regbase + GRER_OFFSET); + __raw_writel(gfer, c->regbase + GFER_OFFSET); +} + static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) { struct pxa_gpio_chip *c; @@ -181,8 +198,7 @@ static int pxa_gpio_irq_type(unsigned in else c->irq_edge_fall &= ~mask; - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio, ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), @@ -244,8 +260,7 @@ static void pxa_unmask_muxed_gpio(unsign struct pxa_gpio_chip *c = gpio_to_chip(gpio); c->irq_mask |= GPIO_bit(gpio); - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); } static struct irq_chip pxa_muxed_gpio_chip = { diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/avr32/Makefile linux-2.6.30-rc4-git/arch/avr32/Makefile --- linux-2.6.30-rc4/arch/avr32/Makefile 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/avr32/Makefile 2009-05-13 09:46:19.000000000 +0200 @@ -43,8 +43,6 @@ core-y += arch/avr32/mm/ drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/ libs-y += arch/avr32/lib/ -CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch - BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec .PHONY: $(BOOT_TARGETS) install diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/m32r/boot/compressed/Makefile linux-2.6.30-rc4-git/arch/m32r/boot/compressed/Makefile --- linux-2.6.30-rc4/arch/m32r/boot/compressed/Makefile 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/m32r/boot/compressed/Makefile 2009-05-13 09:46:19.000000000 +0200 @@ -6,7 +6,6 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \ piggy.o vmlinux.lds -EXTRA_AFLAGS := -traditional OBJECTS = $(obj)/head.o $(obj)/misc.o diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/m32r/include/asm/assembler.h linux-2.6.30-rc4-git/arch/m32r/include/asm/assembler.h --- linux-2.6.30-rc4/arch/m32r/include/asm/assembler.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/m32r/include/asm/assembler.h 2009-05-13 09:46:19.000000000 +0200 @@ -9,14 +9,15 @@ * This file contains M32R architecture specific macro definitions. */ +#include + +#undef __STR -#ifndef __STR #ifdef __ASSEMBLY__ #define __STR(x) x #else -#define __STR(x) #x +#define __STR(x) __stringify(x) #endif -#endif /* __STR */ #ifdef CONFIG_SMP #define M32R_LOCK __STR(lock) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/m32r/kernel/Makefile linux-2.6.30-rc4-git/arch/m32r/kernel/Makefile --- linux-2.6.30-rc4/arch/m32r/kernel/Makefile 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/m32r/kernel/Makefile 2009-05-13 09:46:19.000000000 +0200 @@ -9,5 +9,3 @@ obj-y := process.o entry.o traps.o align obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_MODULES) += module.o - -EXTRA_AFLAGS := -traditional diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/microblaze/include/asm/of_platform.h linux-2.6.30-rc4-git/arch/microblaze/include/asm/of_platform.h --- linux-2.6.30-rc4/arch/microblaze/include/asm/of_platform.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/microblaze/include/asm/of_platform.h 2009-05-13 09:46:19.000000000 +0200 @@ -36,16 +36,6 @@ static const struct of_device_id of_defa {}, }; -/* Platform drivers register/unregister */ -static inline int of_register_platform_driver(struct of_platform_driver *drv) -{ - return of_register_driver(drv, &of_platform_bus_type); -} -static inline void of_unregister_platform_driver(struct of_platform_driver *drv) -{ - of_unregister_driver(drv); -} - /* Platform devices and busses creation */ extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/checks.c linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/checks.c --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/checks.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/checks.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,587 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2007. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -#ifdef TRACE_CHECKS -#define TRACE(c, ...) \ - do { \ - fprintf(stderr, "=== %s: ", (c)->name); \ - fprintf(stderr, __VA_ARGS__); \ - fprintf(stderr, "\n"); \ - } while (0) -#else -#define TRACE(c, fmt, ...) do { } while (0) -#endif - -enum checklevel { - IGNORE = 0, - WARN = 1, - ERROR = 2, -}; - -enum checkstatus { - UNCHECKED = 0, - PREREQ, - PASSED, - FAILED, -}; - -struct check; - -typedef void (*tree_check_fn)(struct check *c, struct node *dt); -typedef void (*node_check_fn)(struct check *c, struct node *dt, struct node *node); -typedef void (*prop_check_fn)(struct check *c, struct node *dt, - struct node *node, struct property *prop); - -struct check { - const char *name; - tree_check_fn tree_fn; - node_check_fn node_fn; - prop_check_fn prop_fn; - void *data; - enum checklevel level; - enum checkstatus status; - int inprogress; - int num_prereqs; - struct check **prereq; -}; - -#define CHECK(nm, tfn, nfn, pfn, d, lvl, ...) \ - static struct check *nm##_prereqs[] = { __VA_ARGS__ }; \ - static struct check nm = { \ - .name = #nm, \ - .tree_fn = (tfn), \ - .node_fn = (nfn), \ - .prop_fn = (pfn), \ - .data = (d), \ - .level = (lvl), \ - .status = UNCHECKED, \ - .num_prereqs = ARRAY_SIZE(nm##_prereqs), \ - .prereq = nm##_prereqs, \ - }; - -#define TREE_CHECK(nm, d, lvl, ...) \ - CHECK(nm, check_##nm, NULL, NULL, d, lvl, __VA_ARGS__) -#define NODE_CHECK(nm, d, lvl, ...) \ - CHECK(nm, NULL, check_##nm, NULL, d, lvl, __VA_ARGS__) -#define PROP_CHECK(nm, d, lvl, ...) \ - CHECK(nm, NULL, NULL, check_##nm, d, lvl, __VA_ARGS__) -#define BATCH_CHECK(nm, lvl, ...) \ - CHECK(nm, NULL, NULL, NULL, NULL, lvl, __VA_ARGS__) - -#ifdef __GNUC__ -static inline void check_msg(struct check *c, const char *fmt, ...) __attribute__((format (printf, 2, 3))); -#endif -static inline void check_msg(struct check *c, const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - - if ((c->level < WARN) || (c->level <= quiet)) - return; /* Suppress message */ - - fprintf(stderr, "%s (%s): ", - (c->level == ERROR) ? "ERROR" : "Warning", c->name); - vfprintf(stderr, fmt, ap); - fprintf(stderr, "\n"); -} - -#define FAIL(c, ...) \ - do { \ - TRACE((c), "\t\tFAILED at %s:%d", __FILE__, __LINE__); \ - (c)->status = FAILED; \ - check_msg((c), __VA_ARGS__); \ - } while (0) - -static void check_nodes_props(struct check *c, struct node *dt, struct node *node) -{ - struct node *child; - struct property *prop; - - TRACE(c, "%s", node->fullpath); - if (c->node_fn) - c->node_fn(c, dt, node); - - if (c->prop_fn) - for_each_property(node, prop) { - TRACE(c, "%s\t'%s'", node->fullpath, prop->name); - c->prop_fn(c, dt, node, prop); - } - - for_each_child(node, child) - check_nodes_props(c, dt, child); -} - -static int run_check(struct check *c, struct node *dt) -{ - int error = 0; - int i; - - assert(!c->inprogress); - - if (c->status != UNCHECKED) - goto out; - - c->inprogress = 1; - - for (i = 0; i < c->num_prereqs; i++) { - struct check *prq = c->prereq[i]; - error |= run_check(prq, dt); - if (prq->status != PASSED) { - c->status = PREREQ; - check_msg(c, "Failed prerequisite '%s'", - c->prereq[i]->name); - } - } - - if (c->status != UNCHECKED) - goto out; - - if (c->node_fn || c->prop_fn) - check_nodes_props(c, dt, dt); - - if (c->tree_fn) - c->tree_fn(c, dt); - if (c->status == UNCHECKED) - c->status = PASSED; - - TRACE(c, "\tCompleted, status %d", c->status); - -out: - c->inprogress = 0; - if ((c->status != PASSED) && (c->level == ERROR)) - error = 1; - return error; -} - -/* - * Utility check functions - */ - -static void check_is_string(struct check *c, struct node *root, - struct node *node) -{ - struct property *prop; - char *propname = c->data; - - prop = get_property(node, propname); - if (!prop) - return; /* Not present, assumed ok */ - - if (!data_is_one_string(prop->val)) - FAIL(c, "\"%s\" property in %s is not a string", - propname, node->fullpath); -} -#define CHECK_IS_STRING(nm, propname, lvl) \ - CHECK(nm, NULL, check_is_string, NULL, (propname), (lvl)) - -static void check_is_cell(struct check *c, struct node *root, - struct node *node) -{ - struct property *prop; - char *propname = c->data; - - prop = get_property(node, propname); - if (!prop) - return; /* Not present, assumed ok */ - - if (prop->val.len != sizeof(cell_t)) - FAIL(c, "\"%s\" property in %s is not a single cell", - propname, node->fullpath); -} -#define CHECK_IS_CELL(nm, propname, lvl) \ - CHECK(nm, NULL, check_is_cell, NULL, (propname), (lvl)) - -/* - * Structural check functions - */ - -static void check_duplicate_node_names(struct check *c, struct node *dt, - struct node *node) -{ - struct node *child, *child2; - - for_each_child(node, child) - for (child2 = child->next_sibling; - child2; - child2 = child2->next_sibling) - if (streq(child->name, child2->name)) - FAIL(c, "Duplicate node name %s", - child->fullpath); -} -NODE_CHECK(duplicate_node_names, NULL, ERROR); - -static void check_duplicate_property_names(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop, *prop2; - - for_each_property(node, prop) - for (prop2 = prop->next; prop2; prop2 = prop2->next) - if (streq(prop->name, prop2->name)) - FAIL(c, "Duplicate property name %s in %s", - prop->name, node->fullpath); -} -NODE_CHECK(duplicate_property_names, NULL, ERROR); - -#define LOWERCASE "abcdefghijklmnopqrstuvwxyz" -#define UPPERCASE "ABCDEFGHIJKLMNOPQRSTUVWXYZ" -#define DIGITS "0123456789" -#define PROPNODECHARS LOWERCASE UPPERCASE DIGITS ",._+*#?-" - -static void check_node_name_chars(struct check *c, struct node *dt, - struct node *node) -{ - int n = strspn(node->name, c->data); - - if (n < strlen(node->name)) - FAIL(c, "Bad character '%c' in node %s", - node->name[n], node->fullpath); -} -NODE_CHECK(node_name_chars, PROPNODECHARS "@", ERROR); - -static void check_node_name_format(struct check *c, struct node *dt, - struct node *node) -{ - if (strchr(get_unitname(node), '@')) - FAIL(c, "Node %s has multiple '@' characters in name", - node->fullpath); -} -NODE_CHECK(node_name_format, NULL, ERROR, &node_name_chars); - -static void check_property_name_chars(struct check *c, struct node *dt, - struct node *node, struct property *prop) -{ - int n = strspn(prop->name, c->data); - - if (n < strlen(prop->name)) - FAIL(c, "Bad character '%c' in property name \"%s\", node %s", - prop->name[n], prop->name, node->fullpath); -} -PROP_CHECK(property_name_chars, PROPNODECHARS, ERROR); - -static void check_explicit_phandles(struct check *c, struct node *root, - struct node *node) -{ - struct property *prop; - struct node *other; - cell_t phandle; - - prop = get_property(node, "linux,phandle"); - if (! prop) - return; /* No phandle, that's fine */ - - if (prop->val.len != sizeof(cell_t)) { - FAIL(c, "%s has bad length (%d) linux,phandle property", - node->fullpath, prop->val.len); - return; - } - - phandle = propval_cell(prop); - if ((phandle == 0) || (phandle == -1)) { - FAIL(c, "%s has invalid linux,phandle value 0x%x", - node->fullpath, phandle); - return; - } - - other = get_node_by_phandle(root, phandle); - if (other) { - FAIL(c, "%s has duplicated phandle 0x%x (seen before at %s)", - node->fullpath, phandle, other->fullpath); - return; - } - - node->phandle = phandle; -} -NODE_CHECK(explicit_phandles, NULL, ERROR); - -static void check_name_properties(struct check *c, struct node *root, - struct node *node) -{ - struct property **pp, *prop = NULL; - - for (pp = &node->proplist; *pp; pp = &((*pp)->next)) - if (streq((*pp)->name, "name")) { - prop = *pp; - break; - } - - if (!prop) - return; /* No name property, that's fine */ - - if ((prop->val.len != node->basenamelen+1) - || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) { - FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead" - " of base node name)", node->fullpath, prop->val.val); - } else { - /* The name property is correct, and therefore redundant. - * Delete it */ - *pp = prop->next; - free(prop->name); - data_free(prop->val); - free(prop); - } -} -CHECK_IS_STRING(name_is_string, "name", ERROR); -NODE_CHECK(name_properties, NULL, ERROR, &name_is_string); - -/* - * Reference fixup functions - */ - -static void fixup_phandle_references(struct check *c, struct node *dt, - struct node *node, struct property *prop) -{ - struct marker *m = prop->val.markers; - struct node *refnode; - cell_t phandle; - - for_each_marker_of_type(m, REF_PHANDLE) { - assert(m->offset + sizeof(cell_t) <= prop->val.len); - - refnode = get_node_by_ref(dt, m->ref); - if (! refnode) { - FAIL(c, "Reference to non-existent node or label \"%s\"\n", - m->ref); - continue; - } - - phandle = get_node_phandle(dt, refnode); - *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle); - } -} -CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR, - &duplicate_node_names, &explicit_phandles); - -static void fixup_path_references(struct check *c, struct node *dt, - struct node *node, struct property *prop) -{ - struct marker *m = prop->val.markers; - struct node *refnode; - char *path; - - for_each_marker_of_type(m, REF_PATH) { - assert(m->offset <= prop->val.len); - - refnode = get_node_by_ref(dt, m->ref); - if (!refnode) { - FAIL(c, "Reference to non-existent node or label \"%s\"\n", - m->ref); - continue; - } - - path = refnode->fullpath; - prop->val = data_insert_at_marker(prop->val, m, path, - strlen(path) + 1); - } -} -CHECK(path_references, NULL, NULL, fixup_path_references, NULL, ERROR, - &duplicate_node_names); - -/* - * Semantic checks - */ -CHECK_IS_CELL(address_cells_is_cell, "#address-cells", WARN); -CHECK_IS_CELL(size_cells_is_cell, "#size-cells", WARN); -CHECK_IS_CELL(interrupt_cells_is_cell, "#interrupt-cells", WARN); - -CHECK_IS_STRING(device_type_is_string, "device_type", WARN); -CHECK_IS_STRING(model_is_string, "model", WARN); -CHECK_IS_STRING(status_is_string, "status", WARN); - -static void fixup_addr_size_cells(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop; - - node->addr_cells = -1; - node->size_cells = -1; - - prop = get_property(node, "#address-cells"); - if (prop) - node->addr_cells = propval_cell(prop); - - prop = get_property(node, "#size-cells"); - if (prop) - node->size_cells = propval_cell(prop); -} -CHECK(addr_size_cells, NULL, fixup_addr_size_cells, NULL, NULL, WARN, - &address_cells_is_cell, &size_cells_is_cell); - -#define node_addr_cells(n) \ - (((n)->addr_cells == -1) ? 2 : (n)->addr_cells) -#define node_size_cells(n) \ - (((n)->size_cells == -1) ? 1 : (n)->size_cells) - -static void check_reg_format(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop; - int addr_cells, size_cells, entrylen; - - prop = get_property(node, "reg"); - if (!prop) - return; /* No "reg", that's fine */ - - if (!node->parent) { - FAIL(c, "Root node has a \"reg\" property"); - return; - } - - if (prop->val.len == 0) - FAIL(c, "\"reg\" property in %s is empty", node->fullpath); - - addr_cells = node_addr_cells(node->parent); - size_cells = node_size_cells(node->parent); - entrylen = (addr_cells + size_cells) * sizeof(cell_t); - - if ((prop->val.len % entrylen) != 0) - FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) " - "(#address-cells == %d, #size-cells == %d)", - node->fullpath, prop->val.len, addr_cells, size_cells); -} -NODE_CHECK(reg_format, NULL, WARN, &addr_size_cells); - -static void check_ranges_format(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop; - int c_addr_cells, p_addr_cells, c_size_cells, p_size_cells, entrylen; - - prop = get_property(node, "ranges"); - if (!prop) - return; - - if (!node->parent) { - FAIL(c, "Root node has a \"ranges\" property"); - return; - } - - p_addr_cells = node_addr_cells(node->parent); - p_size_cells = node_size_cells(node->parent); - c_addr_cells = node_addr_cells(node); - c_size_cells = node_size_cells(node); - entrylen = (p_addr_cells + c_addr_cells + c_size_cells) * sizeof(cell_t); - - if (prop->val.len == 0) { - if (p_addr_cells != c_addr_cells) - FAIL(c, "%s has empty \"ranges\" property but its " - "#address-cells (%d) differs from %s (%d)", - node->fullpath, c_addr_cells, node->parent->fullpath, - p_addr_cells); - if (p_size_cells != c_size_cells) - FAIL(c, "%s has empty \"ranges\" property but its " - "#size-cells (%d) differs from %s (%d)", - node->fullpath, c_size_cells, node->parent->fullpath, - p_size_cells); - } else if ((prop->val.len % entrylen) != 0) { - FAIL(c, "\"ranges\" property in %s has invalid length (%d bytes) " - "(parent #address-cells == %d, child #address-cells == %d, " - "#size-cells == %d)", node->fullpath, prop->val.len, - p_addr_cells, c_addr_cells, c_size_cells); - } -} -NODE_CHECK(ranges_format, NULL, WARN, &addr_size_cells); - -/* - * Style checks - */ -static void check_avoid_default_addr_size(struct check *c, struct node *dt, - struct node *node) -{ - struct property *reg, *ranges; - - if (!node->parent) - return; /* Ignore root node */ - - reg = get_property(node, "reg"); - ranges = get_property(node, "ranges"); - - if (!reg && !ranges) - return; - - if ((node->parent->addr_cells == -1)) - FAIL(c, "Relying on default #address-cells value for %s", - node->fullpath); - - if ((node->parent->size_cells == -1)) - FAIL(c, "Relying on default #size-cells value for %s", - node->fullpath); -} -NODE_CHECK(avoid_default_addr_size, NULL, WARN, &addr_size_cells); - -static void check_obsolete_chosen_interrupt_controller(struct check *c, - struct node *dt) -{ - struct node *chosen; - struct property *prop; - - chosen = get_node_by_path(dt, "/chosen"); - if (!chosen) - return; - - prop = get_property(chosen, "interrupt-controller"); - if (prop) - FAIL(c, "/chosen has obsolete \"interrupt-controller\" " - "property"); -} -TREE_CHECK(obsolete_chosen_interrupt_controller, NULL, WARN); - -static struct check *check_table[] = { - &duplicate_node_names, &duplicate_property_names, - &node_name_chars, &node_name_format, &property_name_chars, - &name_is_string, &name_properties, - &explicit_phandles, - &phandle_references, &path_references, - - &address_cells_is_cell, &size_cells_is_cell, &interrupt_cells_is_cell, - &device_type_is_string, &model_is_string, &status_is_string, - - &addr_size_cells, ®_format, &ranges_format, - - &avoid_default_addr_size, - &obsolete_chosen_interrupt_controller, -}; - -void process_checks(int force, struct boot_info *bi) -{ - struct node *dt = bi->dt; - int i; - int error = 0; - - for (i = 0; i < ARRAY_SIZE(check_table); i++) { - struct check *c = check_table[i]; - - if (c->level != IGNORE) - error = error || run_check(c, dt); - } - - if (error) { - if (!force) { - fprintf(stderr, "ERROR: Input tree has errors, aborting " - "(use -f to force output)\n"); - exit(2); - } else if (quiet < 3) { - fprintf(stderr, "Warning: Input tree has errors, " - "output forced\n"); - } - } -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/data.c linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/data.c --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/data.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/data.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,321 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -void data_free(struct data d) -{ - struct marker *m, *nm; - - m = d.markers; - while (m) { - nm = m->next; - free(m->ref); - free(m); - m = nm; - } - - if (d.val) - free(d.val); -} - -struct data data_grow_for(struct data d, int xlen) -{ - struct data nd; - int newsize; - - if (xlen == 0) - return d; - - nd = d; - - newsize = xlen; - - while ((d.len + xlen) > newsize) - newsize *= 2; - - nd.val = xrealloc(d.val, newsize); - - return nd; -} - -struct data data_copy_mem(const char *mem, int len) -{ - struct data d; - - d = data_grow_for(empty_data, len); - - d.len = len; - memcpy(d.val, mem, len); - - return d; -} - -static char get_oct_char(const char *s, int *i) -{ - char x[4]; - char *endx; - long val; - - x[3] = '\0'; - strncpy(x, s + *i, 3); - - val = strtol(x, &endx, 8); - - assert(endx > x); - - (*i) += endx - x; - return val; -} - -static char get_hex_char(const char *s, int *i) -{ - char x[3]; - char *endx; - long val; - - x[2] = '\0'; - strncpy(x, s + *i, 2); - - val = strtol(x, &endx, 16); - if (!(endx > x)) - die("\\x used with no following hex digits\n"); - - (*i) += endx - x; - return val; -} - -struct data data_copy_escape_string(const char *s, int len) -{ - int i = 0; - struct data d; - char *q; - - d = data_grow_for(empty_data, strlen(s)+1); - - q = d.val; - while (i < len) { - char c = s[i++]; - - if (c != '\\') { - q[d.len++] = c; - continue; - } - - c = s[i++]; - assert(c); - switch (c) { - case 'a': - q[d.len++] = '\a'; - break; - case 'b': - q[d.len++] = '\b'; - break; - case 't': - q[d.len++] = '\t'; - break; - case 'n': - q[d.len++] = '\n'; - break; - case 'v': - q[d.len++] = '\v'; - break; - case 'f': - q[d.len++] = '\f'; - break; - case 'r': - q[d.len++] = '\r'; - break; - case '0': - case '1': - case '2': - case '3': - case '4': - case '5': - case '6': - case '7': - i--; /* need to re-read the first digit as - * part of the octal value */ - q[d.len++] = get_oct_char(s, &i); - break; - case 'x': - q[d.len++] = get_hex_char(s, &i); - break; - default: - q[d.len++] = c; - } - } - - q[d.len++] = '\0'; - return d; -} - -struct data data_copy_file(FILE *f, size_t maxlen) -{ - struct data d = empty_data; - - while (!feof(f) && (d.len < maxlen)) { - size_t chunksize, ret; - - if (maxlen == -1) - chunksize = 4096; - else - chunksize = maxlen - d.len; - - d = data_grow_for(d, chunksize); - ret = fread(d.val + d.len, 1, chunksize, f); - - if (ferror(f)) - die("Error reading file into data: %s", strerror(errno)); - - if (d.len + ret < d.len) - die("Overflow reading file into data\n"); - - d.len += ret; - } - - return d; -} - -struct data data_append_data(struct data d, const void *p, int len) -{ - d = data_grow_for(d, len); - memcpy(d.val + d.len, p, len); - d.len += len; - return d; -} - -struct data data_insert_at_marker(struct data d, struct marker *m, - const void *p, int len) -{ - d = data_grow_for(d, len); - memmove(d.val + m->offset + len, d.val + m->offset, d.len - m->offset); - memcpy(d.val + m->offset, p, len); - d.len += len; - - /* Adjust all markers after the one we're inserting at */ - m = m->next; - for_each_marker(m) - m->offset += len; - return d; -} - -struct data data_append_markers(struct data d, struct marker *m) -{ - struct marker **mp = &d.markers; - - /* Find the end of the markerlist */ - while (*mp) - mp = &((*mp)->next); - *mp = m; - return d; -} - -struct data data_merge(struct data d1, struct data d2) -{ - struct data d; - struct marker *m2 = d2.markers; - - d = data_append_markers(data_append_data(d1, d2.val, d2.len), m2); - - /* Adjust for the length of d1 */ - for_each_marker(m2) - m2->offset += d1.len; - - d2.markers = NULL; /* So data_free() doesn't clobber them */ - data_free(d2); - - return d; -} - -struct data data_append_cell(struct data d, cell_t word) -{ - cell_t beword = cpu_to_fdt32(word); - - return data_append_data(d, &beword, sizeof(beword)); -} - -struct data data_append_re(struct data d, const struct fdt_reserve_entry *re) -{ - struct fdt_reserve_entry bere; - - bere.address = cpu_to_fdt64(re->address); - bere.size = cpu_to_fdt64(re->size); - - return data_append_data(d, &bere, sizeof(bere)); -} - -struct data data_append_addr(struct data d, uint64_t addr) -{ - uint64_t beaddr = cpu_to_fdt64(addr); - - return data_append_data(d, &beaddr, sizeof(beaddr)); -} - -struct data data_append_byte(struct data d, uint8_t byte) -{ - return data_append_data(d, &byte, 1); -} - -struct data data_append_zeroes(struct data d, int len) -{ - d = data_grow_for(d, len); - - memset(d.val + d.len, 0, len); - d.len += len; - return d; -} - -struct data data_append_align(struct data d, int align) -{ - int newlen = ALIGN(d.len, align); - return data_append_zeroes(d, newlen - d.len); -} - -struct data data_add_marker(struct data d, enum markertype type, char *ref) -{ - struct marker *m; - - m = xmalloc(sizeof(*m)); - m->offset = d.len; - m->type = type; - m->ref = ref; - m->next = NULL; - - return data_append_markers(d, m); -} - -int data_is_one_string(struct data d) -{ - int i; - int len = d.len; - - if (len == 0) - return 0; - - for (i = 0; i < len-1; i++) - if (d.val[i] == '\0') - return 0; - - if (d.val[len-1] != '\0') - return 0; - - return 1; -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/dtc.c linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/dtc.c --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/dtc.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/dtc.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,226 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -#include "version_gen.h" - -/* - * Command line options - */ -int quiet; /* Level of quietness */ -int reservenum; /* Number of memory reservation slots */ -int minsize; /* Minimum blob size */ -int padsize; /* Additional padding to blob */ - -char *join_path(const char *path, const char *name) -{ - int lenp = strlen(path); - int lenn = strlen(name); - int len; - int needslash = 1; - char *str; - - len = lenp + lenn + 2; - if ((lenp > 0) && (path[lenp-1] == '/')) { - needslash = 0; - len--; - } - - str = xmalloc(len); - memcpy(str, path, lenp); - if (needslash) { - str[lenp] = '/'; - lenp++; - } - memcpy(str+lenp, name, lenn+1); - return str; -} - -static void fill_fullpaths(struct node *tree, const char *prefix) -{ - struct node *child; - const char *unit; - - tree->fullpath = join_path(prefix, tree->name); - - unit = strchr(tree->name, '@'); - if (unit) - tree->basenamelen = unit - tree->name; - else - tree->basenamelen = strlen(tree->name); - - for_each_child(tree, child) - fill_fullpaths(child, tree->fullpath); -} - -static void __attribute__ ((noreturn)) usage(void) -{ - fprintf(stderr, "Usage:\n"); - fprintf(stderr, "\tdtc [options] \n"); - fprintf(stderr, "\nOptions:\n"); - fprintf(stderr, "\t-h\n"); - fprintf(stderr, "\t\tThis help text\n"); - fprintf(stderr, "\t-q\n"); - fprintf(stderr, "\t\tQuiet: -q suppress warnings, -qq errors, -qqq all\n"); - fprintf(stderr, "\t-I \n"); - fprintf(stderr, "\t\tInput formats are:\n"); - fprintf(stderr, "\t\t\tdts - device tree source text\n"); - fprintf(stderr, "\t\t\tdtb - device tree blob\n"); - fprintf(stderr, "\t\t\tfs - /proc/device-tree style directory\n"); - fprintf(stderr, "\t-o \n"); - fprintf(stderr, "\t-O \n"); - fprintf(stderr, "\t\tOutput formats are:\n"); - fprintf(stderr, "\t\t\tdts - device tree source text\n"); - fprintf(stderr, "\t\t\tdtb - device tree blob\n"); - fprintf(stderr, "\t\t\tasm - assembler source\n"); - fprintf(stderr, "\t-V \n"); - fprintf(stderr, "\t\tBlob version to produce, defaults to %d (relevant for dtb\n\t\tand asm output only)\n", DEFAULT_FDT_VERSION); - fprintf(stderr, "\t-R \n"); - fprintf(stderr, "\t\tMake space for reserve map entries (relevant for \n\t\tdtb and asm output only)\n"); - fprintf(stderr, "\t-S \n"); - fprintf(stderr, "\t\tMake the blob at least long (extra space)\n"); - fprintf(stderr, "\t-p \n"); - fprintf(stderr, "\t\tAdd padding to the blob of long (extra space)\n"); - fprintf(stderr, "\t-b \n"); - fprintf(stderr, "\t\tSet the physical boot cpu\n"); - fprintf(stderr, "\t-f\n"); - fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n"); - fprintf(stderr, "\t-v\n"); - fprintf(stderr, "\t\tPrint DTC version and exit\n"); - exit(3); -} - -int main(int argc, char *argv[]) -{ - struct boot_info *bi; - const char *inform = "dts"; - const char *outform = "dts"; - const char *outname = "-"; - int force = 0, check = 0; - const char *arg; - int opt; - FILE *outf = NULL; - int outversion = DEFAULT_FDT_VERSION; - long long cmdline_boot_cpuid = -1; - - quiet = 0; - reservenum = 0; - minsize = 0; - padsize = 0; - - while ((opt = getopt(argc, argv, "hI:O:o:V:R:S:p:fcqb:v")) != EOF) { - switch (opt) { - case 'I': - inform = optarg; - break; - case 'O': - outform = optarg; - break; - case 'o': - outname = optarg; - break; - case 'V': - outversion = strtol(optarg, NULL, 0); - break; - case 'R': - reservenum = strtol(optarg, NULL, 0); - break; - case 'S': - minsize = strtol(optarg, NULL, 0); - break; - case 'p': - padsize = strtol(optarg, NULL, 0); - break; - case 'f': - force = 1; - break; - case 'c': - check = 1; - break; - case 'q': - quiet++; - break; - case 'b': - cmdline_boot_cpuid = strtoll(optarg, NULL, 0); - break; - case 'v': - printf("Version: %s\n", DTC_VERSION); - exit(0); - case 'h': - default: - usage(); - } - } - - if (argc > (optind+1)) - usage(); - else if (argc < (optind+1)) - arg = "-"; - else - arg = argv[optind]; - - /* minsize and padsize are mutually exclusive */ - if (minsize && padsize) - die("Can't set both -p and -S\n"); - - fprintf(stderr, "DTC: %s->%s on file \"%s\"\n", - inform, outform, arg); - - if (streq(inform, "dts")) - bi = dt_from_source(arg); - else if (streq(inform, "fs")) - bi = dt_from_fs(arg); - else if(streq(inform, "dtb")) - bi = dt_from_blob(arg); - else - die("Unknown input format \"%s\"\n", inform); - - if (cmdline_boot_cpuid != -1) - bi->boot_cpuid_phys = cmdline_boot_cpuid; - - fill_fullpaths(bi->dt, ""); - process_checks(force, bi); - - - if (streq(outname, "-")) { - outf = stdout; - } else { - outf = fopen(outname, "w"); - if (! outf) - die("Couldn't open output file %s: %s\n", - outname, strerror(errno)); - } - - if (streq(outform, "dts")) { - dt_to_source(outf, bi); - } else if (streq(outform, "dtb")) { - dt_to_blob(outf, bi, outversion); - } else if (streq(outform, "asm")) { - dt_to_asm(outf, bi, outversion); - } else if (streq(outform, "null")) { - /* do nothing */ - } else { - die("Unknown output format \"%s\"\n", outform); - } - - exit(0); -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/dtc.h linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/dtc.h --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/dtc.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/dtc.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,246 +0,0 @@ -#ifndef _DTC_H -#define _DTC_H - -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DEFAULT_FDT_VERSION 17 -/* - * Command line options - */ -extern int quiet; /* Level of quietness */ -extern int reservenum; /* Number of memory reservation slots */ -extern int minsize; /* Minimum blob size */ -extern int padsize; /* Additional padding to blob */ - -static inline void __attribute__((noreturn)) die(char * str, ...) -{ - va_list ap; - - va_start(ap, str); - fprintf(stderr, "FATAL ERROR: "); - vfprintf(stderr, str, ap); - exit(1); -} - -static inline void *xmalloc(size_t len) -{ - void *new = malloc(len); - - if (! new) - die("malloc() failed\n"); - - return new; -} - -static inline void *xrealloc(void *p, size_t len) -{ - void *new = realloc(p, len); - - if (! new) - die("realloc() failed (len=%d)\n", len); - - return new; -} - -typedef uint32_t cell_t; - - -#define streq(a, b) (strcmp((a), (b)) == 0) -#define strneq(a, b, n) (strncmp((a), (b), (n)) == 0) - -#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) -#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) - -/* Data blobs */ -enum markertype { - REF_PHANDLE, - REF_PATH, - LABEL, -}; - -struct marker { - enum markertype type; - int offset; - char *ref; - struct marker *next; -}; - -struct data { - int len; - char *val; - struct marker *markers; -}; - - -#define empty_data ((struct data){ /* all .members = 0 or NULL */ }) - -#define for_each_marker(m) \ - for (; (m); (m) = (m)->next) -#define for_each_marker_of_type(m, t) \ - for_each_marker(m) \ - if ((m)->type == (t)) - -void data_free(struct data d); - -struct data data_grow_for(struct data d, int xlen); - -struct data data_copy_mem(const char *mem, int len); -struct data data_copy_escape_string(const char *s, int len); -struct data data_copy_file(FILE *f, size_t len); - -struct data data_append_data(struct data d, const void *p, int len); -struct data data_insert_at_marker(struct data d, struct marker *m, - const void *p, int len); -struct data data_merge(struct data d1, struct data d2); -struct data data_append_cell(struct data d, cell_t word); -struct data data_append_re(struct data d, const struct fdt_reserve_entry *re); -struct data data_append_addr(struct data d, uint64_t addr); -struct data data_append_byte(struct data d, uint8_t byte); -struct data data_append_zeroes(struct data d, int len); -struct data data_append_align(struct data d, int align); - -struct data data_add_marker(struct data d, enum markertype type, char *ref); - -int data_is_one_string(struct data d); - -/* DT constraints */ - -#define MAX_PROPNAME_LEN 31 -#define MAX_NODENAME_LEN 31 - -/* Live trees */ -struct property { - char *name; - struct data val; - - struct property *next; - - char *label; -}; - -struct node { - char *name; - struct property *proplist; - struct node *children; - - struct node *parent; - struct node *next_sibling; - - char *fullpath; - int basenamelen; - - cell_t phandle; - int addr_cells, size_cells; - - char *label; -}; - -#define for_each_property(n, p) \ - for ((p) = (n)->proplist; (p); (p) = (p)->next) - -#define for_each_child(n, c) \ - for ((c) = (n)->children; (c); (c) = (c)->next_sibling) - -struct property *build_property(char *name, struct data val, char *label); -struct property *chain_property(struct property *first, struct property *list); -struct property *reverse_properties(struct property *first); - -struct node *build_node(struct property *proplist, struct node *children); -struct node *name_node(struct node *node, char *name, char *label); -struct node *chain_node(struct node *first, struct node *list); - -void add_property(struct node *node, struct property *prop); -void add_child(struct node *parent, struct node *child); - -const char *get_unitname(struct node *node); -struct property *get_property(struct node *node, const char *propname); -cell_t propval_cell(struct property *prop); -struct node *get_subnode(struct node *node, const char *nodename); -struct node *get_node_by_path(struct node *tree, const char *path); -struct node *get_node_by_label(struct node *tree, const char *label); -struct node *get_node_by_phandle(struct node *tree, cell_t phandle); -struct node *get_node_by_ref(struct node *tree, const char *ref); -cell_t get_node_phandle(struct node *root, struct node *node); - -/* Boot info (tree plus memreserve information */ - -struct reserve_info { - struct fdt_reserve_entry re; - - struct reserve_info *next; - - char *label; -}; - -struct reserve_info *build_reserve_entry(uint64_t start, uint64_t len, char *label); -struct reserve_info *chain_reserve_entry(struct reserve_info *first, - struct reserve_info *list); -struct reserve_info *add_reserve_entry(struct reserve_info *list, - struct reserve_info *new); - - -struct boot_info { - struct reserve_info *reservelist; - struct node *dt; /* the device tree */ - uint32_t boot_cpuid_phys; -}; - -struct boot_info *build_boot_info(struct reserve_info *reservelist, - struct node *tree, uint32_t boot_cpuid_phys); - -/* Checks */ - -void process_checks(int force, struct boot_info *bi); - -/* Flattened trees */ - -void dt_to_blob(FILE *f, struct boot_info *bi, int version); -void dt_to_asm(FILE *f, struct boot_info *bi, int version); - -struct boot_info *dt_from_blob(const char *fname); - -/* Tree source */ - -void dt_to_source(FILE *f, struct boot_info *bi); -struct boot_info *dt_from_source(const char *f); - -/* FS trees */ - -struct boot_info *dt_from_fs(const char *dirname); - -/* misc */ - -char *join_path(const char *path, const char *name); - -#endif /* _DTC_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/dtc-lexer.l linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/dtc-lexer.l --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/dtc-lexer.l 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/dtc-lexer.l 1970-01-01 01:00:00.000000000 +0100 @@ -1,320 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -%option noyywrap nounput yylineno - -%x INCLUDE -%x BYTESTRING -%x PROPNODENAME -%s V1 - -PROPNODECHAR [a-zA-Z0-9,._+*#?@-] -PATHCHAR ({PROPNODECHAR}|[/]) -LABEL [a-zA-Z_][a-zA-Z0-9_]* -STRING \"([^\\"]|\\.)*\" -WS [[:space:]] -COMMENT "/*"([^*]|\*+[^*/])*\*+"/" -LINECOMMENT "//".*\n - -%{ -#include "dtc.h" -#include "srcpos.h" -#include "dtc-parser.tab.h" - - -/*#define LEXDEBUG 1*/ - -#ifdef LEXDEBUG -#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) -#else -#define DPRINT(fmt, ...) do { } while (0) -#endif - -static int dts_version; /* = 0 */ - -#define BEGIN_DEFAULT() if (dts_version == 0) { \ - DPRINT("\n"); \ - BEGIN(INITIAL); \ - } else { \ - DPRINT("\n"); \ - BEGIN(V1); \ - } - -static void push_input_file(const char *filename); -static int pop_input_file(void); -%} - -%% -<*>"/include/"{WS}*{STRING} { - char *name = strchr(yytext, '\"') + 1; - yytext[yyleng-1] = '\0'; - push_input_file(name); - } - -<*><> { - if (!pop_input_file()) { - yyterminate(); - } - } - -<*>{STRING} { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("String: %s\n", yytext); - yylval.data = data_copy_escape_string(yytext+1, - yyleng-2); - yylloc.first_line = yylineno; - return DT_STRING; - } - -<*>"/dts-v1/" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /dts-v1/\n"); - dts_version = 1; - BEGIN_DEFAULT(); - return DT_V1; - } - -<*>"/memreserve/" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /memreserve/\n"); - BEGIN_DEFAULT(); - return DT_MEMRESERVE; - } - -<*>{LABEL}: { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Label: %s\n", yytext); - yylval.labelref = strdup(yytext); - yylval.labelref[yyleng-1] = '\0'; - return DT_LABEL; - } - -[bodh]# { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - if (*yytext == 'b') - yylval.cbase = 2; - else if (*yytext == 'o') - yylval.cbase = 8; - else if (*yytext == 'd') - yylval.cbase = 10; - else - yylval.cbase = 16; - DPRINT("Base: %d\n", yylval.cbase); - return DT_BASE; - } - -[0-9a-fA-F]+ { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LEGACYLITERAL; - } - -[0-9]+|0[xX][0-9a-fA-F]+ { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LITERAL; - } - -\&{LABEL} { /* label reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - -"&{/"{PATHCHAR}+\} { /* new-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yytext[yyleng-1] = '\0'; - DPRINT("Ref: %s\n", yytext+2); - yylval.labelref = strdup(yytext+2); - return DT_REF; - } - -"&/"{PATHCHAR}+ { /* old-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - -[0-9a-fA-F]{2} { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.byte = strtol(yytext, NULL, 16); - DPRINT("Byte: %02x\n", (int)yylval.byte); - return DT_BYTE; - } - -"]" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("/BYTESTRING\n"); - BEGIN_DEFAULT(); - return ']'; - } - -{PROPNODECHAR}+ { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("PropNodeName: %s\n", yytext); - yylval.propnodename = strdup(yytext); - BEGIN_DEFAULT(); - return DT_PROPNODENAME; - } - -"/incbin/" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Binary Include\n"); - return DT_INCBIN; - } - -<*>{WS}+ /* eat whitespace */ -<*>{COMMENT}+ /* eat C-style comments */ -<*>{LINECOMMENT}+ /* eat C++-style comments */ - -<*>. { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Char: %c (\\x%02x)\n", yytext[0], - (unsigned)yytext[0]); - if (yytext[0] == '[') { - DPRINT("\n"); - BEGIN(BYTESTRING); - } - if ((yytext[0] == '{') - || (yytext[0] == ';')) { - DPRINT("\n"); - BEGIN(PROPNODENAME); - } - return yytext[0]; - } - -%% - - -/* - * Stack of nested include file contexts. - */ - -struct incl_file { - struct dtc_file *file; - YY_BUFFER_STATE yy_prev_buf; - int yy_prev_lineno; - struct incl_file *prev; -}; - -static struct incl_file *incl_file_stack; - - -/* - * Detect infinite include recursion. - */ -#define MAX_INCLUDE_DEPTH (100) - -static int incl_depth = 0; - - -static void push_input_file(const char *filename) -{ - struct incl_file *incl_file; - struct dtc_file *newfile; - struct search_path search, *searchptr = NULL; - - assert(filename); - - if (incl_depth++ >= MAX_INCLUDE_DEPTH) - die("Includes nested too deeply"); - - if (srcpos_file) { - search.dir = srcpos_file->dir; - search.next = NULL; - search.prev = NULL; - searchptr = &search; - } - - newfile = dtc_open_file(filename, searchptr); - - incl_file = xmalloc(sizeof(struct incl_file)); - - /* - * Save current context. - */ - incl_file->yy_prev_buf = YY_CURRENT_BUFFER; - incl_file->yy_prev_lineno = yylineno; - incl_file->file = srcpos_file; - incl_file->prev = incl_file_stack; - - incl_file_stack = incl_file; - - /* - * Establish new context. - */ - srcpos_file = newfile; - yylineno = 1; - yyin = newfile->file; - yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE)); -} - - -static int pop_input_file(void) -{ - struct incl_file *incl_file; - - if (incl_file_stack == 0) - return 0; - - dtc_close_file(srcpos_file); - - /* - * Pop. - */ - --incl_depth; - incl_file = incl_file_stack; - incl_file_stack = incl_file->prev; - - /* - * Recover old context. - */ - yy_delete_buffer(YY_CURRENT_BUFFER); - yy_switch_to_buffer(incl_file->yy_prev_buf); - yylineno = incl_file->yy_prev_lineno; - srcpos_file = incl_file->file; - yyin = incl_file->file ? incl_file->file->file : NULL; - - /* - * Free old state. - */ - free(incl_file); - - return 1; -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped 1970-01-01 01:00:00.000000000 +0100 @@ -1,2187 +0,0 @@ -#line 2 "dtc-lexer.lex.c" - -#line 4 "dtc-lexer.lex.c" - -#define YY_INT_ALIGNED short int - -/* A lexical scanner generated by flex */ - -#define FLEX_SCANNER -#define YY_FLEX_MAJOR_VERSION 2 -#define YY_FLEX_MINOR_VERSION 5 -#define YY_FLEX_SUBMINOR_VERSION 34 -#if YY_FLEX_SUBMINOR_VERSION > 0 -#define FLEX_BETA -#endif - -/* First, we deal with platform-specific or compiler-specific issues. */ - -/* begin standard C headers. */ -#include -#include -#include -#include - -/* end standard C headers. */ - -/* flex integer type definitions */ - -#ifndef FLEXINT_H -#define FLEXINT_H - -/* C99 systems have . Non-C99 systems may or may not. */ - -#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L - -/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, - * if you want the limit (max/min) macros for int types. - */ -#ifndef __STDC_LIMIT_MACROS -#define __STDC_LIMIT_MACROS 1 -#endif - -#include -typedef int8_t flex_int8_t; -typedef uint8_t flex_uint8_t; -typedef int16_t flex_int16_t; -typedef uint16_t flex_uint16_t; -typedef int32_t flex_int32_t; -typedef uint32_t flex_uint32_t; -#else -typedef signed char flex_int8_t; -typedef short int flex_int16_t; -typedef int flex_int32_t; -typedef unsigned char flex_uint8_t; -typedef unsigned short int flex_uint16_t; -typedef unsigned int flex_uint32_t; -#endif /* ! C99 */ - -/* Limits of integral types. */ -#ifndef INT8_MIN -#define INT8_MIN (-128) -#endif -#ifndef INT16_MIN -#define INT16_MIN (-32767-1) -#endif -#ifndef INT32_MIN -#define INT32_MIN (-2147483647-1) -#endif -#ifndef INT8_MAX -#define INT8_MAX (127) -#endif -#ifndef INT16_MAX -#define INT16_MAX (32767) -#endif -#ifndef INT32_MAX -#define INT32_MAX (2147483647) -#endif -#ifndef UINT8_MAX -#define UINT8_MAX (255U) -#endif -#ifndef UINT16_MAX -#define UINT16_MAX (65535U) -#endif -#ifndef UINT32_MAX -#define UINT32_MAX (4294967295U) -#endif - -#endif /* ! FLEXINT_H */ - -#ifdef __cplusplus - -/* The "const" storage-class-modifier is valid. */ -#define YY_USE_CONST - -#else /* ! __cplusplus */ - -/* C99 requires __STDC__ to be defined as 1. */ -#if defined (__STDC__) - -#define YY_USE_CONST - -#endif /* defined (__STDC__) */ -#endif /* ! __cplusplus */ - -#ifdef YY_USE_CONST -#define yyconst const -#else -#define yyconst -#endif - -/* Returned upon end-of-file. */ -#define YY_NULL 0 - -/* Promotes a possibly negative, possibly signed char to an unsigned - * integer for use as an array index. If the signed char is negative, - * we want to instead treat it as an 8-bit unsigned char, hence the - * double cast. - */ -#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) - -/* Enter a start condition. This macro really ought to take a parameter, - * but we do it the disgusting crufty way forced on us by the ()-less - * definition of BEGIN. - */ -#define BEGIN (yy_start) = 1 + 2 * - -/* Translate the current start state into a value that can be later handed - * to BEGIN to return to the state. The YYSTATE alias is for lex - * compatibility. - */ -#define YY_START (((yy_start) - 1) / 2) -#define YYSTATE YY_START - -/* Action number for EOF rule of a given start state. */ -#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) - -/* Special action meaning "start processing a new file". */ -#define YY_NEW_FILE yyrestart(yyin ) - -#define YY_END_OF_BUFFER_CHAR 0 - -/* Size of default input buffer. */ -#ifndef YY_BUF_SIZE -#define YY_BUF_SIZE 16384 -#endif - -/* The state buf must be large enough to hold one state per character in the main buffer. - */ -#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) - -#ifndef YY_TYPEDEF_YY_BUFFER_STATE -#define YY_TYPEDEF_YY_BUFFER_STATE -typedef struct yy_buffer_state *YY_BUFFER_STATE; -#endif - -extern int yyleng; - -extern FILE *yyin, *yyout; - -#define EOB_ACT_CONTINUE_SCAN 0 -#define EOB_ACT_END_OF_FILE 1 -#define EOB_ACT_LAST_MATCH 2 - - /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires - * access to the local variable yy_act. Since yyless() is a macro, it would break - * existing scanners that call yyless() from OUTSIDE yylex. - * One obvious solution it to make yy_act a global. I tried that, and saw - * a 5% performance hit in a non-yylineno scanner, because yy_act is - * normally declared as a register variable-- so it is not worth it. - */ - #define YY_LESS_LINENO(n) \ - do { \ - int yyl;\ - for ( yyl = n; yyl < yyleng; ++yyl )\ - if ( yytext[yyl] == '\n' )\ - --yylineno;\ - }while(0) - -/* Return all but the first "n" matched characters back to the input stream. */ -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up yytext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - *yy_cp = (yy_hold_char); \ - YY_RESTORE_YY_MORE_OFFSET \ - (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ - YY_DO_BEFORE_ACTION; /* set up yytext again */ \ - } \ - while ( 0 ) - -#define unput(c) yyunput( c, (yytext_ptr) ) - -/* The following is because we cannot portably get our hands on size_t - * (without autoconf's help, which isn't available because we want - * flex-generated scanners to compile on their own). - * Given that the standard has decreed that size_t exists since 1989, - * I guess we can afford to depend on it. Manoj. - */ - -#ifndef YY_TYPEDEF_YY_SIZE_T -#define YY_TYPEDEF_YY_SIZE_T -typedef size_t yy_size_t; -#endif - -#ifndef YY_STRUCT_YY_BUFFER_STATE -#define YY_STRUCT_YY_BUFFER_STATE -struct yy_buffer_state - { - FILE *yy_input_file; - - char *yy_ch_buf; /* input buffer */ - char *yy_buf_pos; /* current position in input buffer */ - - /* Size of input buffer in bytes, not including room for EOB - * characters. - */ - yy_size_t yy_buf_size; - - /* Number of characters read into yy_ch_buf, not including EOB - * characters. - */ - int yy_n_chars; - - /* Whether we "own" the buffer - i.e., we know we created it, - * and can realloc() it to grow it, and should free() it to - * delete it. - */ - int yy_is_our_buffer; - - /* Whether this is an "interactive" input source; if so, and - * if we're using stdio for input, then we want to use getc() - * instead of fread(), to make sure we stop fetching input after - * each newline. - */ - int yy_is_interactive; - - /* Whether we're considered to be at the beginning of a line. - * If so, '^' rules will be active on the next match, otherwise - * not. - */ - int yy_at_bol; - - int yy_bs_lineno; /**< The line count. */ - int yy_bs_column; /**< The column count. */ - - /* Whether to try to fill the input buffer when we reach the - * end of it. - */ - int yy_fill_buffer; - - int yy_buffer_status; - -#define YY_BUFFER_NEW 0 -#define YY_BUFFER_NORMAL 1 - /* When an EOF's been seen but there's still some text to process - * then we mark the buffer as YY_EOF_PENDING, to indicate that we - * shouldn't try reading from the input source any more. We might - * still have a bunch of tokens to match, though, because of - * possible backing-up. - * - * When we actually see the EOF, we change the status to "new" - * (via yyrestart()), so that the user can continue scanning by - * just pointing yyin at a new input file. - */ -#define YY_BUFFER_EOF_PENDING 2 - - }; -#endif /* !YY_STRUCT_YY_BUFFER_STATE */ - -/* Stack of input buffers. */ -static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ -static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ -static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ - -/* We provide macros for accessing buffer states in case in the - * future we want to put the buffer states in a more general - * "scanner state". - * - * Returns the top of the stack, or NULL. - */ -#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ - ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ - : NULL) - -/* Same as previous macro, but useful when we know that the buffer stack is not - * NULL or when we need an lvalue. For internal use only. - */ -#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] - -/* yy_hold_char holds the character lost when yytext is formed. */ -static char yy_hold_char; -static int yy_n_chars; /* number of characters read into yy_ch_buf */ -int yyleng; - -/* Points to current character in buffer. */ -static char *yy_c_buf_p = (char *) 0; -static int yy_init = 0; /* whether we need to initialize */ -static int yy_start = 0; /* start state number */ - -/* Flag which is used to allow yywrap()'s to do buffer switches - * instead of setting up a fresh yyin. A bit of a hack ... - */ -static int yy_did_buffer_switch_on_eof; - -void yyrestart (FILE *input_file ); -void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); -YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); -void yy_delete_buffer (YY_BUFFER_STATE b ); -void yy_flush_buffer (YY_BUFFER_STATE b ); -void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); -void yypop_buffer_state (void ); - -static void yyensure_buffer_stack (void ); -static void yy_load_buffer_state (void ); -static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); - -#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) - -YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); -YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); -YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); - -void *yyalloc (yy_size_t ); -void *yyrealloc (void *,yy_size_t ); -void yyfree (void * ); - -#define yy_new_buffer yy_create_buffer - -#define yy_set_interactive(is_interactive) \ - { \ - if ( ! YY_CURRENT_BUFFER ){ \ - yyensure_buffer_stack (); \ - YY_CURRENT_BUFFER_LVALUE = \ - yy_create_buffer(yyin,YY_BUF_SIZE ); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ - } - -#define yy_set_bol(at_bol) \ - { \ - if ( ! YY_CURRENT_BUFFER ){\ - yyensure_buffer_stack (); \ - YY_CURRENT_BUFFER_LVALUE = \ - yy_create_buffer(yyin,YY_BUF_SIZE ); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ - } - -#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) - -/* Begin user sect3 */ - -#define yywrap(n) 1 -#define YY_SKIP_YYWRAP - -typedef unsigned char YY_CHAR; - -FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; - -typedef int yy_state_type; - -extern int yylineno; - -int yylineno = 1; - -extern char *yytext; -#define yytext_ptr yytext - -static yy_state_type yy_get_previous_state (void ); -static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); -static int yy_get_next_buffer (void ); -static void yy_fatal_error (yyconst char msg[] ); - -/* Done after the current pattern has been matched and before the - * corresponding action - sets up yytext. - */ -#define YY_DO_BEFORE_ACTION \ - (yytext_ptr) = yy_bp; \ - yyleng = (size_t) (yy_cp - yy_bp); \ - (yy_hold_char) = *yy_cp; \ - *yy_cp = '\0'; \ - (yy_c_buf_p) = yy_cp; - -#define YY_NUM_RULES 20 -#define YY_END_OF_BUFFER 21 -/* This struct is not used in this scanner, - but its presence is necessary. */ -struct yy_trans_info - { - flex_int32_t yy_verify; - flex_int32_t yy_nxt; - }; -static yyconst flex_int16_t yy_accept[104] = - { 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 21, 19, 16, 16, 19, 19, 19, 7, 7, 19, - 7, 19, 19, 19, 19, 13, 14, 14, 19, 8, - 8, 16, 0, 2, 0, 0, 9, 0, 0, 0, - 0, 0, 0, 7, 7, 5, 0, 6, 0, 12, - 12, 14, 14, 8, 0, 11, 9, 0, 0, 0, - 0, 18, 0, 0, 0, 0, 8, 0, 17, 0, - 0, 0, 0, 0, 10, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 3, 15, - 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, - - 0, 4, 0 - } ; - -static yyconst flex_int32_t yy_ec[256] = - { 0, - 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, - 2, 2, 2, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 2, 1, 4, 5, 1, 1, 6, 1, 1, - 1, 7, 8, 8, 9, 8, 10, 11, 12, 13, - 13, 13, 13, 13, 13, 13, 13, 14, 1, 1, - 1, 1, 8, 8, 15, 15, 15, 15, 15, 15, - 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, - 16, 16, 16, 16, 16, 16, 16, 17, 16, 16, - 1, 18, 19, 1, 16, 1, 15, 20, 21, 22, - - 23, 15, 16, 24, 25, 16, 16, 26, 27, 28, - 24, 16, 16, 29, 30, 31, 32, 33, 16, 17, - 16, 16, 34, 1, 35, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1 - } ; - -static yyconst flex_int32_t yy_meta[36] = - { 0, - 1, 1, 1, 1, 2, 1, 2, 2, 2, 3, - 4, 4, 4, 5, 6, 7, 7, 1, 1, 6, - 6, 6, 6, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 8, 1 - } ; - -static yyconst flex_int16_t yy_base[117] = - { 0, - 0, 0, 30, 0, 44, 0, 67, 0, 97, 105, - 302, 303, 35, 44, 40, 94, 112, 0, 129, 152, - 296, 295, 159, 0, 176, 303, 0, 116, 95, 165, - 49, 46, 102, 303, 296, 0, 0, 288, 290, 293, - 264, 266, 270, 0, 0, 303, 0, 303, 264, 303, - 0, 0, 195, 101, 0, 0, 0, 0, 284, 125, - 277, 265, 225, 230, 216, 218, 0, 202, 224, 221, - 217, 107, 196, 188, 303, 206, 179, 186, 178, 185, - 183, 162, 161, 150, 169, 160, 145, 125, 303, 303, - 137, 109, 190, 103, 203, 167, 108, 197, 303, 123, - - 29, 303, 303, 215, 221, 226, 229, 234, 240, 246, - 250, 257, 265, 270, 275, 282 - } ; - -static yyconst flex_int16_t yy_def[117] = - { 0, - 103, 1, 1, 3, 3, 5, 103, 7, 3, 3, - 103, 103, 103, 103, 104, 105, 103, 106, 103, 19, - 19, 20, 103, 107, 20, 103, 108, 109, 105, 103, - 103, 103, 104, 103, 104, 110, 111, 103, 112, 113, - 103, 103, 103, 106, 19, 103, 20, 103, 103, 103, - 20, 108, 109, 103, 114, 110, 111, 115, 112, 112, - 113, 103, 103, 103, 103, 103, 114, 115, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 116, 103, 116, 103, 116, - - 103, 103, 0, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103 - } ; - -static yyconst flex_int16_t yy_nxt[339] = - { 0, - 12, 13, 14, 15, 12, 16, 12, 12, 12, 17, - 18, 18, 18, 12, 19, 20, 20, 12, 12, 21, - 19, 21, 19, 22, 20, 20, 20, 20, 20, 20, - 20, 20, 20, 12, 12, 12, 32, 32, 102, 23, - 12, 12, 12, 34, 20, 32, 32, 32, 32, 20, - 20, 20, 20, 20, 24, 24, 24, 35, 25, 54, - 54, 54, 26, 25, 25, 25, 25, 12, 13, 14, - 15, 27, 12, 27, 27, 27, 23, 27, 27, 27, - 12, 28, 28, 28, 12, 12, 28, 28, 28, 28, - 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, - - 12, 12, 29, 36, 103, 34, 17, 30, 31, 31, - 29, 54, 54, 54, 17, 30, 31, 31, 39, 35, - 52, 40, 52, 52, 52, 103, 78, 38, 38, 46, - 101, 60, 79, 41, 69, 97, 42, 94, 43, 45, - 45, 45, 46, 45, 47, 47, 93, 92, 45, 45, - 45, 45, 47, 47, 47, 47, 47, 47, 47, 47, - 47, 47, 47, 47, 47, 39, 47, 91, 40, 90, - 99, 47, 47, 47, 47, 54, 54, 54, 89, 88, - 41, 55, 87, 49, 100, 43, 51, 51, 51, 86, - 51, 95, 95, 96, 85, 51, 51, 51, 51, 52, - - 99, 52, 52, 52, 95, 95, 96, 84, 46, 83, - 82, 81, 39, 79, 100, 33, 33, 33, 33, 33, - 33, 33, 33, 37, 80, 77, 37, 37, 37, 44, - 40, 44, 50, 76, 50, 52, 75, 52, 74, 52, - 52, 53, 73, 53, 53, 53, 53, 56, 56, 56, - 72, 56, 56, 57, 71, 57, 57, 59, 59, 59, - 59, 59, 59, 59, 59, 61, 61, 61, 61, 61, - 61, 61, 61, 67, 70, 67, 68, 68, 68, 62, - 68, 68, 98, 98, 98, 98, 98, 98, 98, 98, - 60, 66, 65, 64, 63, 62, 60, 58, 103, 48, - - 48, 103, 11, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103 - } ; - -static yyconst flex_int16_t yy_chk[339] = - { 0, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 3, 13, 13, 101, 3, - 3, 3, 3, 15, 3, 14, 14, 32, 32, 3, - 3, 3, 3, 3, 5, 5, 5, 15, 5, 31, - 31, 31, 5, 5, 5, 5, 5, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - - 7, 7, 9, 16, 29, 33, 9, 9, 9, 9, - 10, 54, 54, 54, 10, 10, 10, 10, 17, 33, - 28, 17, 28, 28, 28, 100, 72, 16, 29, 28, - 97, 60, 72, 17, 60, 94, 17, 92, 17, 19, - 19, 19, 19, 19, 19, 19, 91, 88, 19, 19, - 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, - 19, 19, 20, 20, 20, 23, 20, 87, 23, 86, - 96, 20, 20, 20, 20, 30, 30, 30, 85, 84, - 23, 30, 83, 23, 96, 23, 25, 25, 25, 82, - 25, 93, 93, 93, 81, 25, 25, 25, 25, 53, - - 98, 53, 53, 53, 95, 95, 95, 80, 53, 79, - 78, 77, 76, 74, 98, 104, 104, 104, 104, 104, - 104, 104, 104, 105, 73, 71, 105, 105, 105, 106, - 70, 106, 107, 69, 107, 108, 68, 108, 66, 108, - 108, 109, 65, 109, 109, 109, 109, 110, 110, 110, - 64, 110, 110, 111, 63, 111, 111, 112, 112, 112, - 112, 112, 112, 112, 112, 113, 113, 113, 113, 113, - 113, 113, 113, 114, 62, 114, 115, 115, 115, 61, - 115, 115, 116, 116, 116, 116, 116, 116, 116, 116, - 59, 49, 43, 42, 41, 40, 39, 38, 35, 22, - - 21, 11, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103 - } ; - -/* Table of booleans, true if rule could match eol. */ -static yyconst flex_int32_t yy_rule_can_match_eol[21] = - { 0, -1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, - 0, }; - -static yy_state_type yy_last_accepting_state; -static char *yy_last_accepting_cpos; - -extern int yy_flex_debug; -int yy_flex_debug = 0; - -/* The intent behind this definition is that it'll catch - * any uses of REJECT which flex missed. - */ -#define REJECT reject_used_but_not_detected -#define yymore() yymore_used_but_not_detected -#define YY_MORE_ADJ 0 -#define YY_RESTORE_YY_MORE_OFFSET -char *yytext; -#line 1 "dtc-lexer.l" -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - - - - -#line 37 "dtc-lexer.l" -#include "dtc.h" -#include "srcpos.h" -#include "dtc-parser.tab.h" - - -/*#define LEXDEBUG 1*/ - -#ifdef LEXDEBUG -#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) -#else -#define DPRINT(fmt, ...) do { } while (0) -#endif - -static int dts_version; /* = 0 */ - -#define BEGIN_DEFAULT() if (dts_version == 0) { \ - DPRINT("\n"); \ - BEGIN(INITIAL); \ - } else { \ - DPRINT("\n"); \ - BEGIN(V1); \ - } - -static void push_input_file(const char *filename); -static int pop_input_file(void); -#line 638 "dtc-lexer.lex.c" - -#define INITIAL 0 -#define INCLUDE 1 -#define BYTESTRING 2 -#define PROPNODENAME 3 -#define V1 4 - -#ifndef YY_NO_UNISTD_H -/* Special case for "unistd.h", since it is non-ANSI. We include it way - * down here because we want the user's section 1 to have been scanned first. - * The user has a chance to override it with an option. - */ -#include -#endif - -#ifndef YY_EXTRA_TYPE -#define YY_EXTRA_TYPE void * -#endif - -static int yy_init_globals (void ); - -/* Macros after this point can all be overridden by user definitions in - * section 1. - */ - -#ifndef YY_SKIP_YYWRAP -#ifdef __cplusplus -extern "C" int yywrap (void ); -#else -extern int yywrap (void ); -#endif -#endif - -#ifndef yytext_ptr -static void yy_flex_strncpy (char *,yyconst char *,int ); -#endif - -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen (yyconst char * ); -#endif - -#ifndef YY_NO_INPUT - -#ifdef __cplusplus -static int yyinput (void ); -#else -static int input (void ); -#endif - -#endif - -/* Amount of stuff to slurp up with each read. */ -#ifndef YY_READ_BUF_SIZE -#define YY_READ_BUF_SIZE 8192 -#endif - -/* Copy whatever the last rule matched to the standard output. */ -#ifndef ECHO -/* This used to be an fputs(), but since the string might contain NUL's, - * we now use fwrite(). - */ -#define ECHO fwrite( yytext, yyleng, 1, yyout ) -#endif - -/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, - * is returned in "result". - */ -#ifndef YY_INPUT -#define YY_INPUT(buf,result,max_size) \ - if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ - { \ - int c = '*'; \ - int n; \ - for ( n = 0; n < max_size && \ - (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ - buf[n] = (char) c; \ - if ( c == '\n' ) \ - buf[n++] = (char) c; \ - if ( c == EOF && ferror( yyin ) ) \ - YY_FATAL_ERROR( "input in flex scanner failed" ); \ - result = n; \ - } \ - else \ - { \ - errno=0; \ - while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ - { \ - if( errno != EINTR) \ - { \ - YY_FATAL_ERROR( "input in flex scanner failed" ); \ - break; \ - } \ - errno=0; \ - clearerr(yyin); \ - } \ - }\ -\ - -#endif - -/* No semi-colon after return; correct usage is to write "yyterminate();" - - * we don't want an extra ';' after the "return" because that will cause - * some compilers to complain about unreachable statements. - */ -#ifndef yyterminate -#define yyterminate() return YY_NULL -#endif - -/* Number of entries by which start-condition stack grows. */ -#ifndef YY_START_STACK_INCR -#define YY_START_STACK_INCR 25 -#endif - -/* Report a fatal error. */ -#ifndef YY_FATAL_ERROR -#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) -#endif - -/* end tables serialization structures and prototypes */ - -/* Default declaration of generated scanner - a define so the user can - * easily add parameters. - */ -#ifndef YY_DECL -#define YY_DECL_IS_OURS 1 - -extern int yylex (void); - -#define YY_DECL int yylex (void) -#endif /* !YY_DECL */ - -/* Code executed at the beginning of each rule, after yytext and yyleng - * have been set up. - */ -#ifndef YY_USER_ACTION -#define YY_USER_ACTION -#endif - -/* Code executed at the end of each rule. */ -#ifndef YY_BREAK -#define YY_BREAK break; -#endif - -#define YY_RULE_SETUP \ - YY_USER_ACTION - -/** The main scanner function which does all the work. - */ -YY_DECL -{ - register yy_state_type yy_current_state; - register char *yy_cp, *yy_bp; - register int yy_act; - -#line 64 "dtc-lexer.l" - -#line 795 "dtc-lexer.lex.c" - - if ( !(yy_init) ) - { - (yy_init) = 1; - -#ifdef YY_USER_INIT - YY_USER_INIT; -#endif - - if ( ! (yy_start) ) - (yy_start) = 1; /* first start state */ - - if ( ! yyin ) - yyin = stdin; - - if ( ! yyout ) - yyout = stdout; - - if ( ! YY_CURRENT_BUFFER ) { - yyensure_buffer_stack (); - YY_CURRENT_BUFFER_LVALUE = - yy_create_buffer(yyin,YY_BUF_SIZE ); - } - - yy_load_buffer_state( ); - } - - while ( 1 ) /* loops until end-of-file is reached */ - { - yy_cp = (yy_c_buf_p); - - /* Support of yytext. */ - *yy_cp = (yy_hold_char); - - /* yy_bp points to the position in yy_ch_buf of the start of - * the current run. - */ - yy_bp = yy_cp; - - yy_current_state = (yy_start); -yy_match: - do - { - register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; - if ( yy_accept[yy_current_state] ) - { - (yy_last_accepting_state) = yy_current_state; - (yy_last_accepting_cpos) = yy_cp; - } - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 104 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - ++yy_cp; - } - while ( yy_base[yy_current_state] != 303 ); - -yy_find_action: - yy_act = yy_accept[yy_current_state]; - if ( yy_act == 0 ) - { /* have to back up */ - yy_cp = (yy_last_accepting_cpos); - yy_current_state = (yy_last_accepting_state); - yy_act = yy_accept[yy_current_state]; - } - - YY_DO_BEFORE_ACTION; - - if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] ) - { - int yyl; - for ( yyl = 0; yyl < yyleng; ++yyl ) - if ( yytext[yyl] == '\n' ) - - yylineno++; -; - } - -do_action: /* This label is used only to access EOF actions. */ - - switch ( yy_act ) - { /* beginning of action switch */ - case 0: /* must back up */ - /* undo the effects of YY_DO_BEFORE_ACTION */ - *yy_cp = (yy_hold_char); - yy_cp = (yy_last_accepting_cpos); - yy_current_state = (yy_last_accepting_state); - goto yy_find_action; - -case 1: -/* rule 1 can match eol */ -YY_RULE_SETUP -#line 65 "dtc-lexer.l" -{ - char *name = strchr(yytext, '\"') + 1; - yytext[yyleng-1] = '\0'; - push_input_file(name); - } - YY_BREAK -case YY_STATE_EOF(INITIAL): -case YY_STATE_EOF(INCLUDE): -case YY_STATE_EOF(BYTESTRING): -case YY_STATE_EOF(PROPNODENAME): -case YY_STATE_EOF(V1): -#line 71 "dtc-lexer.l" -{ - if (!pop_input_file()) { - yyterminate(); - } - } - YY_BREAK -case 2: -/* rule 2 can match eol */ -YY_RULE_SETUP -#line 77 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("String: %s\n", yytext); - yylval.data = data_copy_escape_string(yytext+1, - yyleng-2); - yylloc.first_line = yylineno; - return DT_STRING; - } - YY_BREAK -case 3: -YY_RULE_SETUP -#line 87 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /dts-v1/\n"); - dts_version = 1; - BEGIN_DEFAULT(); - return DT_V1; - } - YY_BREAK -case 4: -YY_RULE_SETUP -#line 96 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /memreserve/\n"); - BEGIN_DEFAULT(); - return DT_MEMRESERVE; - } - YY_BREAK -case 5: -YY_RULE_SETUP -#line 104 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Label: %s\n", yytext); - yylval.labelref = strdup(yytext); - yylval.labelref[yyleng-1] = '\0'; - return DT_LABEL; - } - YY_BREAK -case 6: -YY_RULE_SETUP -#line 113 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - if (*yytext == 'b') - yylval.cbase = 2; - else if (*yytext == 'o') - yylval.cbase = 8; - else if (*yytext == 'd') - yylval.cbase = 10; - else - yylval.cbase = 16; - DPRINT("Base: %d\n", yylval.cbase); - return DT_BASE; - } - YY_BREAK -case 7: -YY_RULE_SETUP -#line 128 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LEGACYLITERAL; - } - YY_BREAK -case 8: -YY_RULE_SETUP -#line 136 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LITERAL; - } - YY_BREAK -case 9: -YY_RULE_SETUP -#line 144 "dtc-lexer.l" -{ /* label reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - YY_BREAK -case 10: -YY_RULE_SETUP -#line 152 "dtc-lexer.l" -{ /* new-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yytext[yyleng-1] = '\0'; - DPRINT("Ref: %s\n", yytext+2); - yylval.labelref = strdup(yytext+2); - return DT_REF; - } - YY_BREAK -case 11: -YY_RULE_SETUP -#line 161 "dtc-lexer.l" -{ /* old-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - YY_BREAK -case 12: -YY_RULE_SETUP -#line 169 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.byte = strtol(yytext, NULL, 16); - DPRINT("Byte: %02x\n", (int)yylval.byte); - return DT_BYTE; - } - YY_BREAK -case 13: -YY_RULE_SETUP -#line 177 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("/BYTESTRING\n"); - BEGIN_DEFAULT(); - return ']'; - } - YY_BREAK -case 14: -YY_RULE_SETUP -#line 185 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("PropNodeName: %s\n", yytext); - yylval.propnodename = strdup(yytext); - BEGIN_DEFAULT(); - return DT_PROPNODENAME; - } - YY_BREAK -case 15: -YY_RULE_SETUP -#line 194 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Binary Include\n"); - return DT_INCBIN; - } - YY_BREAK -case 16: -/* rule 16 can match eol */ -YY_RULE_SETUP -#line 201 "dtc-lexer.l" -/* eat whitespace */ - YY_BREAK -case 17: -/* rule 17 can match eol */ -YY_RULE_SETUP -#line 202 "dtc-lexer.l" -/* eat C-style comments */ - YY_BREAK -case 18: -/* rule 18 can match eol */ -YY_RULE_SETUP -#line 203 "dtc-lexer.l" -/* eat C++-style comments */ - YY_BREAK -case 19: -YY_RULE_SETUP -#line 205 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Char: %c (\\x%02x)\n", yytext[0], - (unsigned)yytext[0]); - if (yytext[0] == '[') { - DPRINT("\n"); - BEGIN(BYTESTRING); - } - if ((yytext[0] == '{') - || (yytext[0] == ';')) { - DPRINT("\n"); - BEGIN(PROPNODENAME); - } - return yytext[0]; - } - YY_BREAK -case 20: -YY_RULE_SETUP -#line 222 "dtc-lexer.l" -ECHO; - YY_BREAK -#line 1120 "dtc-lexer.lex.c" - - case YY_END_OF_BUFFER: - { - /* Amount of text matched not including the EOB char. */ - int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; - - /* Undo the effects of YY_DO_BEFORE_ACTION. */ - *yy_cp = (yy_hold_char); - YY_RESTORE_YY_MORE_OFFSET - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) - { - /* We're scanning a new file or input source. It's - * possible that this happened because the user - * just pointed yyin at a new source and called - * yylex(). If so, then we have to assure - * consistency between YY_CURRENT_BUFFER and our - * globals. Here is the right place to do so, because - * this is the first action (other than possibly a - * back-up) that will match for the new input source. - */ - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; - YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; - } - - /* Note that here we test for yy_c_buf_p "<=" to the position - * of the first EOB in the buffer, since yy_c_buf_p will - * already have been incremented past the NUL character - * (since all states make transitions on EOB to the - * end-of-buffer state). Contrast this with the test - * in input(). - */ - if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) - { /* This was really a NUL. */ - yy_state_type yy_next_state; - - (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( ); - - /* Okay, we're now positioned to make the NUL - * transition. We couldn't have - * yy_get_previous_state() go ahead and do it - * for us because it doesn't know how to deal - * with the possibility of jamming (and we don't - * want to build jamming into it because then it - * will run more slowly). - */ - - yy_next_state = yy_try_NUL_trans( yy_current_state ); - - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - - if ( yy_next_state ) - { - /* Consume the NUL. */ - yy_cp = ++(yy_c_buf_p); - yy_current_state = yy_next_state; - goto yy_match; - } - - else - { - yy_cp = (yy_c_buf_p); - goto yy_find_action; - } - } - - else switch ( yy_get_next_buffer( ) ) - { - case EOB_ACT_END_OF_FILE: - { - (yy_did_buffer_switch_on_eof) = 0; - - if ( yywrap( ) ) - { - /* Note: because we've taken care in - * yy_get_next_buffer() to have set up - * yytext, we can now set up - * yy_c_buf_p so that if some total - * hoser (like flex itself) wants to - * call the scanner after we return the - * YY_NULL, it'll still work - another - * YY_NULL will get returned. - */ - (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; - - yy_act = YY_STATE_EOF(YY_START); - goto do_action; - } - - else - { - if ( ! (yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; - } - break; - } - - case EOB_ACT_CONTINUE_SCAN: - (yy_c_buf_p) = - (yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( ); - - yy_cp = (yy_c_buf_p); - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - goto yy_match; - - case EOB_ACT_LAST_MATCH: - (yy_c_buf_p) = - &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; - - yy_current_state = yy_get_previous_state( ); - - yy_cp = (yy_c_buf_p); - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - goto yy_find_action; - } - break; - } - - default: - YY_FATAL_ERROR( - "fatal flex scanner internal error--no action found" ); - } /* end of action switch */ - } /* end of scanning one token */ -} /* end of yylex */ - -/* yy_get_next_buffer - try to read in a new buffer - * - * Returns a code representing an action: - * EOB_ACT_LAST_MATCH - - * EOB_ACT_CONTINUE_SCAN - continue scanning from current position - * EOB_ACT_END_OF_FILE - end of file - */ -static int yy_get_next_buffer (void) -{ - register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; - register char *source = (yytext_ptr); - register int number_to_move, i; - int ret_val; - - if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) - YY_FATAL_ERROR( - "fatal flex scanner internal error--end of buffer missed" ); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) - { /* Don't try to fill the buffer, so this is an EOF. */ - if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) - { - /* We matched a single character, the EOB, so - * treat this as a final EOF. - */ - return EOB_ACT_END_OF_FILE; - } - - else - { - /* We matched some text prior to the EOB, first - * process it. - */ - return EOB_ACT_LAST_MATCH; - } - } - - /* Try to read more data. */ - - /* First move last chars to start of buffer. */ - number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; - - for ( i = 0; i < number_to_move; ++i ) - *(dest++) = *(source++); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) - /* don't do the read, it's not guaranteed to return an EOF, - * just force an EOF - */ - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; - - else - { - int num_to_read = - YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; - - while ( num_to_read <= 0 ) - { /* Not enough room in the buffer - grow it. */ - - /* just a shorter name for the current buffer */ - YY_BUFFER_STATE b = YY_CURRENT_BUFFER; - - int yy_c_buf_p_offset = - (int) ((yy_c_buf_p) - b->yy_ch_buf); - - if ( b->yy_is_our_buffer ) - { - int new_size = b->yy_buf_size * 2; - - if ( new_size <= 0 ) - b->yy_buf_size += b->yy_buf_size / 8; - else - b->yy_buf_size *= 2; - - b->yy_ch_buf = (char *) - /* Include room in for 2 EOB chars. */ - yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 ); - } - else - /* Can't grow it, we don't own it. */ - b->yy_ch_buf = 0; - - if ( ! b->yy_ch_buf ) - YY_FATAL_ERROR( - "fatal error - scanner input buffer overflow" ); - - (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset]; - - num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - - number_to_move - 1; - - } - - if ( num_to_read > YY_READ_BUF_SIZE ) - num_to_read = YY_READ_BUF_SIZE; - - /* Read in more data. */ - YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), - (yy_n_chars), (size_t) num_to_read ); - - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - if ( (yy_n_chars) == 0 ) - { - if ( number_to_move == YY_MORE_ADJ ) - { - ret_val = EOB_ACT_END_OF_FILE; - yyrestart(yyin ); - } - - else - { - ret_val = EOB_ACT_LAST_MATCH; - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = - YY_BUFFER_EOF_PENDING; - } - } - - else - ret_val = EOB_ACT_CONTINUE_SCAN; - - if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { - /* Extend the array by 50%, plus the number we really need. */ - yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); - if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); - } - - (yy_n_chars) += number_to_move; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; - - (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; - - return ret_val; -} - -/* yy_get_previous_state - get the state just before the EOB char was reached */ - - static yy_state_type yy_get_previous_state (void) -{ - register yy_state_type yy_current_state; - register char *yy_cp; - - yy_current_state = (yy_start); - - for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) - { - register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); - if ( yy_accept[yy_current_state] ) - { - (yy_last_accepting_state) = yy_current_state; - (yy_last_accepting_cpos) = yy_cp; - } - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 104 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - } - - return yy_current_state; -} - -/* yy_try_NUL_trans - try to make a transition on the NUL character - * - * synopsis - * next_state = yy_try_NUL_trans( current_state ); - */ - static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) -{ - register int yy_is_jam; - register char *yy_cp = (yy_c_buf_p); - - register YY_CHAR yy_c = 1; - if ( yy_accept[yy_current_state] ) - { - (yy_last_accepting_state) = yy_current_state; - (yy_last_accepting_cpos) = yy_cp; - } - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 104 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - yy_is_jam = (yy_current_state == 103); - - return yy_is_jam ? 0 : yy_current_state; -} - -#ifndef YY_NO_INPUT -#ifdef __cplusplus - static int yyinput (void) -#else - static int input (void) -#endif - -{ - int c; - - *(yy_c_buf_p) = (yy_hold_char); - - if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) - { - /* yy_c_buf_p now points to the character we want to return. - * If this occurs *before* the EOB characters, then it's a - * valid NUL; if not, then we've hit the end of the buffer. - */ - if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) - /* This was really a NUL. */ - *(yy_c_buf_p) = '\0'; - - else - { /* need more input */ - int offset = (yy_c_buf_p) - (yytext_ptr); - ++(yy_c_buf_p); - - switch ( yy_get_next_buffer( ) ) - { - case EOB_ACT_LAST_MATCH: - /* This happens because yy_g_n_b() - * sees that we've accumulated a - * token and flags that we need to - * try matching the token before - * proceeding. But for input(), - * there's no matching to consider. - * So convert the EOB_ACT_LAST_MATCH - * to EOB_ACT_END_OF_FILE. - */ - - /* Reset buffer status. */ - yyrestart(yyin ); - - /*FALLTHROUGH*/ - - case EOB_ACT_END_OF_FILE: - { - if ( yywrap( ) ) - return EOF; - - if ( ! (yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; -#ifdef __cplusplus - return yyinput(); -#else - return input(); -#endif - } - - case EOB_ACT_CONTINUE_SCAN: - (yy_c_buf_p) = (yytext_ptr) + offset; - break; - } - } - } - - c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ - *(yy_c_buf_p) = '\0'; /* preserve yytext */ - (yy_hold_char) = *++(yy_c_buf_p); - - if ( c == '\n' ) - - yylineno++; -; - - return c; -} -#endif /* ifndef YY_NO_INPUT */ - -/** Immediately switch to a different input stream. - * @param input_file A readable stream. - * - * @note This function does not reset the start condition to @c INITIAL . - */ - void yyrestart (FILE * input_file ) -{ - - if ( ! YY_CURRENT_BUFFER ){ - yyensure_buffer_stack (); - YY_CURRENT_BUFFER_LVALUE = - yy_create_buffer(yyin,YY_BUF_SIZE ); - } - - yy_init_buffer(YY_CURRENT_BUFFER,input_file ); - yy_load_buffer_state( ); -} - -/** Switch to a different input buffer. - * @param new_buffer The new input buffer. - * - */ - void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) -{ - - /* TODO. We should be able to replace this entire function body - * with - * yypop_buffer_state(); - * yypush_buffer_state(new_buffer); - */ - yyensure_buffer_stack (); - if ( YY_CURRENT_BUFFER == new_buffer ) - return; - - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *(yy_c_buf_p) = (yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - YY_CURRENT_BUFFER_LVALUE = new_buffer; - yy_load_buffer_state( ); - - /* We don't actually know whether we did this switch during - * EOF (yywrap()) processing, but the only time this flag - * is looked at is after yywrap() is called, so it's safe - * to go ahead and always set it. - */ - (yy_did_buffer_switch_on_eof) = 1; -} - -static void yy_load_buffer_state (void) -{ - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; - (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; - yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; - (yy_hold_char) = *(yy_c_buf_p); -} - -/** Allocate and initialize an input buffer state. - * @param file A readable stream. - * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. - * - * @return the allocated buffer state. - */ - YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) -{ - YY_BUFFER_STATE b; - - b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); - - b->yy_buf_size = size; - - /* yy_ch_buf has to be 2 characters longer than the size given because - * we need to put in 2 end-of-buffer characters. - */ - b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); - if ( ! b->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); - - b->yy_is_our_buffer = 1; - - yy_init_buffer(b,file ); - - return b; -} - -/** Destroy the buffer. - * @param b a buffer created with yy_create_buffer() - * - */ - void yy_delete_buffer (YY_BUFFER_STATE b ) -{ - - if ( ! b ) - return; - - if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ - YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; - - if ( b->yy_is_our_buffer ) - yyfree((void *) b->yy_ch_buf ); - - yyfree((void *) b ); -} - -#ifndef __cplusplus -extern int isatty (int ); -#endif /* __cplusplus */ - -/* Initializes or reinitializes a buffer. - * This function is sometimes called more than once on the same buffer, - * such as during a yyrestart() or at EOF. - */ - static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) - -{ - int oerrno = errno; - - yy_flush_buffer(b ); - - b->yy_input_file = file; - b->yy_fill_buffer = 1; - - /* If b is the current buffer, then yy_init_buffer was _probably_ - * called from yyrestart() or through yy_get_next_buffer. - * In that case, we don't want to reset the lineno or column. - */ - if (b != YY_CURRENT_BUFFER){ - b->yy_bs_lineno = 1; - b->yy_bs_column = 0; - } - - b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; - - errno = oerrno; -} - -/** Discard all buffered characters. On the next scan, YY_INPUT will be called. - * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. - * - */ - void yy_flush_buffer (YY_BUFFER_STATE b ) -{ - if ( ! b ) - return; - - b->yy_n_chars = 0; - - /* We always need two end-of-buffer characters. The first causes - * a transition to the end-of-buffer state. The second causes - * a jam in that state. - */ - b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; - b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; - - b->yy_buf_pos = &b->yy_ch_buf[0]; - - b->yy_at_bol = 1; - b->yy_buffer_status = YY_BUFFER_NEW; - - if ( b == YY_CURRENT_BUFFER ) - yy_load_buffer_state( ); -} - -/** Pushes the new state onto the stack. The new state becomes - * the current state. This function will allocate the stack - * if necessary. - * @param new_buffer The new state. - * - */ -void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) -{ - if (new_buffer == NULL) - return; - - yyensure_buffer_stack(); - - /* This block is copied from yy_switch_to_buffer. */ - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *(yy_c_buf_p) = (yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - /* Only push if top exists. Otherwise, replace top. */ - if (YY_CURRENT_BUFFER) - (yy_buffer_stack_top)++; - YY_CURRENT_BUFFER_LVALUE = new_buffer; - - /* copied from yy_switch_to_buffer. */ - yy_load_buffer_state( ); - (yy_did_buffer_switch_on_eof) = 1; -} - -/** Removes and deletes the top of the stack, if present. - * The next element becomes the new top. - * - */ -void yypop_buffer_state (void) -{ - if (!YY_CURRENT_BUFFER) - return; - - yy_delete_buffer(YY_CURRENT_BUFFER ); - YY_CURRENT_BUFFER_LVALUE = NULL; - if ((yy_buffer_stack_top) > 0) - --(yy_buffer_stack_top); - - if (YY_CURRENT_BUFFER) { - yy_load_buffer_state( ); - (yy_did_buffer_switch_on_eof) = 1; - } -} - -/* Allocates the stack if it does not exist. - * Guarantees space for at least one push. - */ -static void yyensure_buffer_stack (void) -{ - int num_to_alloc; - - if (!(yy_buffer_stack)) { - - /* First allocation is just for 2 elements, since we don't know if this - * scanner will even need a stack. We use 2 instead of 1 to avoid an - * immediate realloc on the next call. - */ - num_to_alloc = 1; - (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc - (num_to_alloc * sizeof(struct yy_buffer_state*) - ); - if ( ! (yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); - - memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); - - (yy_buffer_stack_max) = num_to_alloc; - (yy_buffer_stack_top) = 0; - return; - } - - if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ - - /* Increase the buffer to prepare for a possible push. */ - int grow_size = 8 /* arbitrary grow size */; - - num_to_alloc = (yy_buffer_stack_max) + grow_size; - (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc - ((yy_buffer_stack), - num_to_alloc * sizeof(struct yy_buffer_state*) - ); - if ( ! (yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); - - /* zero only the new slots.*/ - memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); - (yy_buffer_stack_max) = num_to_alloc; - } -} - -/** Setup the input buffer state to scan directly from a user-specified character buffer. - * @param base the character buffer - * @param size the size in bytes of the character buffer - * - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) -{ - YY_BUFFER_STATE b; - - if ( size < 2 || - base[size-2] != YY_END_OF_BUFFER_CHAR || - base[size-1] != YY_END_OF_BUFFER_CHAR ) - /* They forgot to leave room for the EOB's. */ - return 0; - - b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); - - b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ - b->yy_buf_pos = b->yy_ch_buf = base; - b->yy_is_our_buffer = 0; - b->yy_input_file = 0; - b->yy_n_chars = b->yy_buf_size; - b->yy_is_interactive = 0; - b->yy_at_bol = 1; - b->yy_fill_buffer = 0; - b->yy_buffer_status = YY_BUFFER_NEW; - - yy_switch_to_buffer(b ); - - return b; -} - -/** Setup the input buffer state to scan a string. The next call to yylex() will - * scan from a @e copy of @a str. - * @param yystr a NUL-terminated string to scan - * - * @return the newly allocated buffer state object. - * @note If you want to scan bytes that may contain NUL values, then use - * yy_scan_bytes() instead. - */ -YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) -{ - - return yy_scan_bytes(yystr,strlen(yystr) ); -} - -/** Setup the input buffer state to scan the given bytes. The next call to yylex() will - * scan from a @e copy of @a bytes. - * @param bytes the byte buffer to scan - * @param len the number of bytes in the buffer pointed to by @a bytes. - * - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) -{ - YY_BUFFER_STATE b; - char *buf; - yy_size_t n; - int i; - - /* Get memory for full buffer, including space for trailing EOB's. */ - n = _yybytes_len + 2; - buf = (char *) yyalloc(n ); - if ( ! buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); - - for ( i = 0; i < _yybytes_len; ++i ) - buf[i] = yybytes[i]; - - buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; - - b = yy_scan_buffer(buf,n ); - if ( ! b ) - YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); - - /* It's okay to grow etc. this buffer, and we should throw it - * away when we're done. - */ - b->yy_is_our_buffer = 1; - - return b; -} - -#ifndef YY_EXIT_FAILURE -#define YY_EXIT_FAILURE 2 -#endif - -static void yy_fatal_error (yyconst char* msg ) -{ - (void) fprintf( stderr, "%s\n", msg ); - exit( YY_EXIT_FAILURE ); -} - -/* Redefine yyless() so it works in section 3 code. */ - -#undef yyless -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up yytext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - yytext[yyleng] = (yy_hold_char); \ - (yy_c_buf_p) = yytext + yyless_macro_arg; \ - (yy_hold_char) = *(yy_c_buf_p); \ - *(yy_c_buf_p) = '\0'; \ - yyleng = yyless_macro_arg; \ - } \ - while ( 0 ) - -/* Accessor methods (get/set functions) to struct members. */ - -/** Get the current line number. - * - */ -int yyget_lineno (void) -{ - - return yylineno; -} - -/** Get the input stream. - * - */ -FILE *yyget_in (void) -{ - return yyin; -} - -/** Get the output stream. - * - */ -FILE *yyget_out (void) -{ - return yyout; -} - -/** Get the length of the current token. - * - */ -int yyget_leng (void) -{ - return yyleng; -} - -/** Get the current token. - * - */ - -char *yyget_text (void) -{ - return yytext; -} - -/** Set the current line number. - * @param line_number - * - */ -void yyset_lineno (int line_number ) -{ - - yylineno = line_number; -} - -/** Set the input stream. This does not discard the current - * input buffer. - * @param in_str A readable stream. - * - * @see yy_switch_to_buffer - */ -void yyset_in (FILE * in_str ) -{ - yyin = in_str ; -} - -void yyset_out (FILE * out_str ) -{ - yyout = out_str ; -} - -int yyget_debug (void) -{ - return yy_flex_debug; -} - -void yyset_debug (int bdebug ) -{ - yy_flex_debug = bdebug ; -} - -static int yy_init_globals (void) -{ - /* Initialization is the same as for the non-reentrant scanner. - * This function is called from yylex_destroy(), so don't allocate here. - */ - - /* We do not touch yylineno unless the option is enabled. */ - yylineno = 1; - - (yy_buffer_stack) = 0; - (yy_buffer_stack_top) = 0; - (yy_buffer_stack_max) = 0; - (yy_c_buf_p) = (char *) 0; - (yy_init) = 0; - (yy_start) = 0; - -/* Defined in main.c */ -#ifdef YY_STDINIT - yyin = stdin; - yyout = stdout; -#else - yyin = (FILE *) 0; - yyout = (FILE *) 0; -#endif - - /* For future reference: Set errno on error, since we are called by - * yylex_init() - */ - return 0; -} - -/* yylex_destroy is for both reentrant and non-reentrant scanners. */ -int yylex_destroy (void) -{ - - /* Pop the buffer stack, destroying each element. */ - while(YY_CURRENT_BUFFER){ - yy_delete_buffer(YY_CURRENT_BUFFER ); - YY_CURRENT_BUFFER_LVALUE = NULL; - yypop_buffer_state(); - } - - /* Destroy the stack itself. */ - yyfree((yy_buffer_stack) ); - (yy_buffer_stack) = NULL; - - /* Reset the globals. This is important in a non-reentrant scanner so the next time - * yylex() is called, initialization will occur. */ - yy_init_globals( ); - - return 0; -} - -/* - * Internal utility routines. - */ - -#ifndef yytext_ptr -static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) -{ - register int i; - for ( i = 0; i < n; ++i ) - s1[i] = s2[i]; -} -#endif - -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen (yyconst char * s ) -{ - register int n; - for ( n = 0; s[n]; ++n ) - ; - - return n; -} -#endif - -void *yyalloc (yy_size_t size ) -{ - return (void *) malloc( size ); -} - -void *yyrealloc (void * ptr, yy_size_t size ) -{ - /* The cast to (char *) in the following accommodates both - * implementations that use char* generic pointers, and those - * that use void* generic pointers. It works with the latter - * because both ANSI C and C++ allow castless assignment from - * any pointer type to void*, and deal with argument conversions - * as though doing an assignment. - */ - return (void *) realloc( (char *) ptr, size ); -} - -void yyfree (void * ptr ) -{ - free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ -} - -#define YYTABLES_NAME "yytables" - -#line 222 "dtc-lexer.l" - - - - -/* - * Stack of nested include file contexts. - */ - -struct incl_file { - struct dtc_file *file; - YY_BUFFER_STATE yy_prev_buf; - int yy_prev_lineno; - struct incl_file *prev; -}; - -static struct incl_file *incl_file_stack; - - -/* - * Detect infinite include recursion. - */ -#define MAX_INCLUDE_DEPTH (100) - -static int incl_depth = 0; - - -static void push_input_file(const char *filename) -{ - struct incl_file *incl_file; - struct dtc_file *newfile; - struct search_path search, *searchptr = NULL; - - assert(filename); - - if (incl_depth++ >= MAX_INCLUDE_DEPTH) - die("Includes nested too deeply"); - - if (srcpos_file) { - search.dir = srcpos_file->dir; - search.next = NULL; - search.prev = NULL; - searchptr = &search; - } - - newfile = dtc_open_file(filename, searchptr); - - incl_file = xmalloc(sizeof(struct incl_file)); - - /* - * Save current context. - */ - incl_file->yy_prev_buf = YY_CURRENT_BUFFER; - incl_file->yy_prev_lineno = yylineno; - incl_file->file = srcpos_file; - incl_file->prev = incl_file_stack; - - incl_file_stack = incl_file; - - /* - * Establish new context. - */ - srcpos_file = newfile; - yylineno = 1; - yyin = newfile->file; - yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); -} - - -static int pop_input_file(void) -{ - struct incl_file *incl_file; - - if (incl_file_stack == 0) - return 0; - - dtc_close_file(srcpos_file); - - /* - * Pop. - */ - --incl_depth; - incl_file = incl_file_stack; - incl_file_stack = incl_file->prev; - - /* - * Recover old context. - */ - yy_delete_buffer(YY_CURRENT_BUFFER); - yy_switch_to_buffer(incl_file->yy_prev_buf); - yylineno = incl_file->yy_prev_lineno; - srcpos_file = incl_file->file; - yyin = incl_file->file ? incl_file->file->file : NULL; - - /* - * Free old state. - */ - free(incl_file); - - return 1; -} - diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped 1970-01-01 01:00:00.000000000 +0100 @@ -1,2040 +0,0 @@ -/* A Bison parser, made by GNU Bison 2.3. */ - -/* Skeleton implementation for Bison's Yacc-like parsers in C - - Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 - Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, - Boston, MA 02110-1301, USA. */ - -/* As a special exception, you may create a larger work that contains - part or all of the Bison parser skeleton and distribute that work - under terms of your choice, so long as that work isn't itself a - parser generator using the skeleton or a modified version thereof - as a parser skeleton. Alternatively, if you modify or redistribute - the parser skeleton itself, you may (at your option) remove this - special exception, which will cause the skeleton and the resulting - Bison output files to be licensed under the GNU General Public - License without this special exception. - - This special exception was added by the Free Software Foundation in - version 2.2 of Bison. */ - -/* C LALR(1) parser skeleton written by Richard Stallman, by - simplifying the original so-called "semantic" parser. */ - -/* All symbols defined below should begin with yy or YY, to avoid - infringing on user name space. This should be done even for local - variables, as they might otherwise be expanded by user macros. - There are some unavoidable exceptions within include files to - define necessary library symbols; they are noted "INFRINGES ON - USER NAME SPACE" below. */ - -/* Identify Bison output. */ -#define YYBISON 1 - -/* Bison version. */ -#define YYBISON_VERSION "2.3" - -/* Skeleton name. */ -#define YYSKELETON_NAME "yacc.c" - -/* Pure parsers. */ -#define YYPURE 0 - -/* Using locations. */ -#define YYLSP_NEEDED 1 - - - -/* Tokens. */ -#ifndef YYTOKENTYPE -# define YYTOKENTYPE - /* Put the tokens into the symbol table, so that GDB and other debuggers - know about them. */ - enum yytokentype { - DT_V1 = 258, - DT_MEMRESERVE = 259, - DT_PROPNODENAME = 260, - DT_LITERAL = 261, - DT_LEGACYLITERAL = 262, - DT_BASE = 263, - DT_BYTE = 264, - DT_STRING = 265, - DT_LABEL = 266, - DT_REF = 267, - DT_INCBIN = 268 - }; -#endif -/* Tokens. */ -#define DT_V1 258 -#define DT_MEMRESERVE 259 -#define DT_PROPNODENAME 260 -#define DT_LITERAL 261 -#define DT_LEGACYLITERAL 262 -#define DT_BASE 263 -#define DT_BYTE 264 -#define DT_STRING 265 -#define DT_LABEL 266 -#define DT_REF 267 -#define DT_INCBIN 268 - - - - -/* Copy the first part of user declarations. */ -#line 23 "dtc-parser.y" - -#include - -#include "dtc.h" -#include "srcpos.h" - -extern int yylex(void); - -extern struct boot_info *the_boot_info; -extern int treesource_error; - -static unsigned long long eval_literal(const char *s, int base, int bits); - - -/* Enabling traces. */ -#ifndef YYDEBUG -# define YYDEBUG 0 -#endif - -/* Enabling verbose error messages. */ -#ifdef YYERROR_VERBOSE -# undef YYERROR_VERBOSE -# define YYERROR_VERBOSE 1 -#else -# define YYERROR_VERBOSE 0 -#endif - -/* Enabling the token table. */ -#ifndef YYTOKEN_TABLE -# define YYTOKEN_TABLE 0 -#endif - -#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED -typedef union YYSTYPE -#line 37 "dtc-parser.y" -{ - char *propnodename; - char *literal; - char *labelref; - unsigned int cbase; - uint8_t byte; - struct data data; - - uint64_t addr; - cell_t cell; - struct property *prop; - struct property *proplist; - struct node *node; - struct node *nodelist; - struct reserve_info *re; -} -/* Line 187 of yacc.c. */ -#line 153 "dtc-parser.tab.c" - YYSTYPE; -# define yystype YYSTYPE /* obsolescent; will be withdrawn */ -# define YYSTYPE_IS_DECLARED 1 -# define YYSTYPE_IS_TRIVIAL 1 -#endif - -#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED -typedef struct YYLTYPE -{ - int first_line; - int first_column; - int last_line; - int last_column; -} YYLTYPE; -# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ -# define YYLTYPE_IS_DECLARED 1 -# define YYLTYPE_IS_TRIVIAL 1 -#endif - - -/* Copy the second part of user declarations. */ - - -/* Line 216 of yacc.c. */ -#line 178 "dtc-parser.tab.c" - -#ifdef short -# undef short -#endif - -#ifdef YYTYPE_UINT8 -typedef YYTYPE_UINT8 yytype_uint8; -#else -typedef unsigned char yytype_uint8; -#endif - -#ifdef YYTYPE_INT8 -typedef YYTYPE_INT8 yytype_int8; -#elif (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -typedef signed char yytype_int8; -#else -typedef short int yytype_int8; -#endif - -#ifdef YYTYPE_UINT16 -typedef YYTYPE_UINT16 yytype_uint16; -#else -typedef unsigned short int yytype_uint16; -#endif - -#ifdef YYTYPE_INT16 -typedef YYTYPE_INT16 yytype_int16; -#else -typedef short int yytype_int16; -#endif - -#ifndef YYSIZE_T -# ifdef __SIZE_TYPE__ -# define YYSIZE_T __SIZE_TYPE__ -# elif defined size_t -# define YYSIZE_T size_t -# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -# include /* INFRINGES ON USER NAME SPACE */ -# define YYSIZE_T size_t -# else -# define YYSIZE_T unsigned int -# endif -#endif - -#define YYSIZE_MAXIMUM ((YYSIZE_T) -1) - -#ifndef YY_ -# if YYENABLE_NLS -# if ENABLE_NLS -# include /* INFRINGES ON USER NAME SPACE */ -# define YY_(msgid) dgettext ("bison-runtime", msgid) -# endif -# endif -# ifndef YY_ -# define YY_(msgid) msgid -# endif -#endif - -/* Suppress unused-variable warnings by "using" E. */ -#if ! defined lint || defined __GNUC__ -# define YYUSE(e) ((void) (e)) -#else -# define YYUSE(e) /* empty */ -#endif - -/* Identity function, used to suppress warnings about constant conditions. */ -#ifndef lint -# define YYID(n) (n) -#else -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static int -YYID (int i) -#else -static int -YYID (i) - int i; -#endif -{ - return i; -} -#endif - -#if ! defined yyoverflow || YYERROR_VERBOSE - -/* The parser invokes alloca or malloc; define the necessary symbols. */ - -# ifdef YYSTACK_USE_ALLOCA -# if YYSTACK_USE_ALLOCA -# ifdef __GNUC__ -# define YYSTACK_ALLOC __builtin_alloca -# elif defined __BUILTIN_VA_ARG_INCR -# include /* INFRINGES ON USER NAME SPACE */ -# elif defined _AIX -# define YYSTACK_ALLOC __alloca -# elif defined _MSC_VER -# include /* INFRINGES ON USER NAME SPACE */ -# define alloca _alloca -# else -# define YYSTACK_ALLOC alloca -# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -# include /* INFRINGES ON USER NAME SPACE */ -# ifndef _STDLIB_H -# define _STDLIB_H 1 -# endif -# endif -# endif -# endif -# endif - -# ifdef YYSTACK_ALLOC - /* Pacify GCC's `empty if-body' warning. */ -# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) -# ifndef YYSTACK_ALLOC_MAXIMUM - /* The OS might guarantee only one guard page at the bottom of the stack, - and a page size can be as small as 4096 bytes. So we cannot safely - invoke alloca (N) if N exceeds 4096. Use a slightly smaller number - to allow for a few compiler-allocated temporary stack slots. */ -# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */ -# endif -# else -# define YYSTACK_ALLOC YYMALLOC -# define YYSTACK_FREE YYFREE -# ifndef YYSTACK_ALLOC_MAXIMUM -# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM -# endif -# if (defined __cplusplus && ! defined _STDLIB_H \ - && ! ((defined YYMALLOC || defined malloc) \ - && (defined YYFREE || defined free))) -# include /* INFRINGES ON USER NAME SPACE */ -# ifndef _STDLIB_H -# define _STDLIB_H 1 -# endif -# endif -# ifndef YYMALLOC -# define YYMALLOC malloc -# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ -# endif -# endif -# ifndef YYFREE -# define YYFREE free -# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -void free (void *); /* INFRINGES ON USER NAME SPACE */ -# endif -# endif -# endif -#endif /* ! defined yyoverflow || YYERROR_VERBOSE */ - - -#if (! defined yyoverflow \ - && (! defined __cplusplus \ - || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \ - && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) - -/* A type that is properly aligned for any stack member. */ -union yyalloc -{ - yytype_int16 yyss; - YYSTYPE yyvs; - YYLTYPE yyls; -}; - -/* The size of the maximum gap between one aligned stack and the next. */ -# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) - -/* The size of an array large to enough to hold all stacks, each with - N elements. */ -# define YYSTACK_BYTES(N) \ - ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \ - + 2 * YYSTACK_GAP_MAXIMUM) - -/* Copy COUNT objects from FROM to TO. The source and destination do - not overlap. */ -# ifndef YYCOPY -# if defined __GNUC__ && 1 < __GNUC__ -# define YYCOPY(To, From, Count) \ - __builtin_memcpy (To, From, (Count) * sizeof (*(From))) -# else -# define YYCOPY(To, From, Count) \ - do \ - { \ - YYSIZE_T yyi; \ - for (yyi = 0; yyi < (Count); yyi++) \ - (To)[yyi] = (From)[yyi]; \ - } \ - while (YYID (0)) -# endif -# endif - -/* Relocate STACK from its old location to the new one. The - local variables YYSIZE and YYSTACKSIZE give the old and new number of - elements in the stack, and YYPTR gives the new location of the - stack. Advance YYPTR to a properly aligned location for the next - stack. */ -# define YYSTACK_RELOCATE(Stack) \ - do \ - { \ - YYSIZE_T yynewbytes; \ - YYCOPY (&yyptr->Stack, Stack, yysize); \ - Stack = &yyptr->Stack; \ - yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ - yyptr += yynewbytes / sizeof (*yyptr); \ - } \ - while (YYID (0)) - -#endif - -/* YYFINAL -- State number of the termination state. */ -#define YYFINAL 9 -/* YYLAST -- Last index in YYTABLE. */ -#define YYLAST 73 - -/* YYNTOKENS -- Number of terminals. */ -#define YYNTOKENS 27 -/* YYNNTS -- Number of nonterminals. */ -#define YYNNTS 20 -/* YYNRULES -- Number of rules. */ -#define YYNRULES 45 -/* YYNRULES -- Number of states. */ -#define YYNSTATES 76 - -/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ -#define YYUNDEFTOK 2 -#define YYMAXUTOK 268 - -#define YYTRANSLATE(YYX) \ - ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) - -/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ -static const yytype_uint8 yytranslate[] = -{ - 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 24, 26, 2, 2, 25, 15, 2, 16, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 14, - 20, 19, 21, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 22, 2, 23, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 17, 2, 18, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, - 5, 6, 7, 8, 9, 10, 11, 12, 13 -}; - -#if YYDEBUG -/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in - YYRHS. */ -static const yytype_uint8 yyprhs[] = -{ - 0, 0, 3, 8, 11, 12, 15, 21, 22, 25, - 27, 34, 36, 38, 41, 47, 48, 51, 57, 61, - 64, 69, 74, 77, 87, 93, 96, 97, 100, 103, - 104, 107, 110, 113, 114, 116, 118, 121, 122, 125, - 128, 129, 132, 135, 139, 140 -}; - -/* YYRHS -- A `-1'-separated list of the rules' RHS. */ -static const yytype_int8 yyrhs[] = -{ - 28, 0, -1, 3, 14, 29, 34, -1, 31, 34, - -1, -1, 30, 29, -1, 46, 4, 33, 33, 14, - -1, -1, 32, 31, -1, 30, -1, 46, 4, 33, - 15, 33, 14, -1, 6, -1, 7, -1, 16, 35, - -1, 17, 36, 44, 18, 14, -1, -1, 36, 37, - -1, 46, 5, 19, 38, 14, -1, 46, 5, 14, - -1, 39, 10, -1, 39, 20, 40, 21, -1, 39, - 22, 43, 23, -1, 39, 12, -1, 39, 13, 24, - 10, 25, 33, 25, 33, 26, -1, 39, 13, 24, - 10, 26, -1, 38, 11, -1, -1, 38, 25, -1, - 39, 11, -1, -1, 40, 42, -1, 40, 12, -1, - 40, 11, -1, -1, 8, -1, 6, -1, 41, 7, - -1, -1, 43, 9, -1, 43, 11, -1, -1, 45, - 44, -1, 45, 37, -1, 46, 5, 35, -1, -1, - 11, -1 -}; - -/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ -static const yytype_uint16 yyrline[] = -{ - 0, 89, 89, 93, 101, 104, 111, 119, 122, 129, - 133, 140, 144, 151, 158, 166, 169, 176, 180, 187, - 191, 195, 199, 203, 220, 231, 239, 242, 246, 254, - 257, 261, 266, 274, 277, 281, 285, 293, 296, 300, - 308, 311, 315, 323, 331, 334 -}; -#endif - -#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE -/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. - First, the terminals, then, starting at YYNTOKENS, nonterminals. */ -static const char *const yytname[] = -{ - "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE", - "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE", - "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'-'", - "'/'", "'{'", "'}'", "'='", "'<'", "'>'", "'['", "']'", "'('", "','", - "')'", "$accept", "sourcefile", "memreserves", "memreserve", - "v0_memreserves", "v0_memreserve", "addr", "devicetree", "nodedef", - "proplist", "propdef", "propdata", "propdataprefix", "celllist", - "cellbase", "cellval", "bytestring", "subnodes", "subnode", "label", 0 -}; -#endif - -# ifdef YYPRINT -/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to - token YYLEX-NUM. */ -static const yytype_uint16 yytoknum[] = -{ - 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, - 265, 266, 267, 268, 59, 45, 47, 123, 125, 61, - 60, 62, 91, 93, 40, 44, 41 -}; -# endif - -/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ -static const yytype_uint8 yyr1[] = -{ - 0, 27, 28, 28, 29, 29, 30, 31, 31, 32, - 32, 33, 33, 34, 35, 36, 36, 37, 37, 38, - 38, 38, 38, 38, 38, 38, 39, 39, 39, 40, - 40, 40, 40, 41, 41, 42, 42, 43, 43, 43, - 44, 44, 44, 45, 46, 46 -}; - -/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ -static const yytype_uint8 yyr2[] = -{ - 0, 2, 4, 2, 0, 2, 5, 0, 2, 1, - 6, 1, 1, 2, 5, 0, 2, 5, 3, 2, - 4, 4, 2, 9, 5, 2, 0, 2, 2, 0, - 2, 2, 2, 0, 1, 1, 2, 0, 2, 2, - 0, 2, 2, 3, 0, 1 -}; - -/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state - STATE-NUM when YYTABLE doesn't specify something else to do. Zero - means the default is an error. */ -static const yytype_uint8 yydefact[] = -{ - 7, 0, 45, 0, 9, 0, 7, 0, 4, 1, - 0, 3, 8, 0, 0, 4, 0, 15, 13, 11, - 12, 0, 2, 5, 0, 40, 0, 0, 0, 16, - 0, 40, 0, 0, 6, 0, 42, 41, 0, 10, - 14, 18, 26, 43, 0, 0, 25, 17, 27, 19, - 28, 22, 0, 29, 37, 0, 33, 0, 0, 35, - 34, 32, 31, 20, 0, 30, 38, 39, 21, 0, - 24, 36, 0, 0, 0, 23 -}; - -/* YYDEFGOTO[NTERM-NUM]. */ -static const yytype_int8 yydefgoto[] = -{ - -1, 3, 14, 4, 5, 6, 27, 11, 18, 25, - 29, 44, 45, 56, 64, 65, 57, 30, 31, 7 -}; - -/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing - STATE-NUM. */ -#define YYPACT_NINF -14 -static const yytype_int8 yypact[] = -{ - 30, -11, -14, 7, -14, -1, 27, 13, 27, -14, - 8, -14, -14, 40, -1, 27, 35, -14, -14, -14, - -14, 21, -14, -14, 40, 24, 40, 28, 40, -14, - 32, 24, 46, 38, -14, 39, -14, -14, 26, -14, - -14, -14, -14, -14, -9, 10, -14, -14, -14, -14, - -14, -14, 31, -14, -14, 44, -2, 3, 23, -14, - -14, -14, -14, -14, 50, -14, -14, -14, -14, 40, - -14, -14, 33, 40, 36, -14 -}; - -/* YYPGOTO[NTERM-NUM]. */ -static const yytype_int8 yypgoto[] = -{ - -14, -14, 48, 29, 53, -14, -13, 47, 34, -14, - 37, -14, -14, -14, -14, -14, -14, 42, -14, -7 -}; - -/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If - positive, shift that token. If negative, reduce the rule which - number is the opposite. If zero, do what YYDEFACT says. - If YYTABLE_NINF, syntax error. */ -#define YYTABLE_NINF -45 -static const yytype_int8 yytable[] = -{ - 21, 16, 46, 8, 59, 47, 60, 9, 16, 61, - 62, 28, 66, 33, 67, 10, 48, 13, 32, 63, - 49, 50, 51, 52, 32, 17, 68, 19, 20, -44, - 53, -44, 54, 1, -44, 2, 26, 15, 2, 24, - 41, 2, 34, 17, 15, 42, 19, 20, 69, 70, - 35, 38, 39, 40, 58, 55, 72, 71, 73, 12, - 74, 22, 75, 23, 0, 0, 0, 0, 36, 0, - 0, 0, 43, 37 -}; - -static const yytype_int8 yycheck[] = -{ - 13, 8, 11, 14, 6, 14, 8, 0, 15, 11, - 12, 24, 9, 26, 11, 16, 25, 4, 25, 21, - 10, 11, 12, 13, 31, 17, 23, 6, 7, 5, - 20, 4, 22, 3, 4, 11, 15, 8, 11, 4, - 14, 11, 14, 17, 15, 19, 6, 7, 25, 26, - 18, 5, 14, 14, 10, 24, 69, 7, 25, 6, - 73, 14, 26, 15, -1, -1, -1, -1, 31, -1, - -1, -1, 38, 31 -}; - -/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing - symbol of state STATE-NUM. */ -static const yytype_uint8 yystos[] = -{ - 0, 3, 11, 28, 30, 31, 32, 46, 14, 0, - 16, 34, 31, 4, 29, 30, 46, 17, 35, 6, - 7, 33, 34, 29, 4, 36, 15, 33, 33, 37, - 44, 45, 46, 33, 14, 18, 37, 44, 5, 14, - 14, 14, 19, 35, 38, 39, 11, 14, 25, 10, - 11, 12, 13, 20, 22, 24, 40, 43, 10, 6, - 8, 11, 12, 21, 41, 42, 9, 11, 23, 25, - 26, 7, 33, 25, 33, 26 -}; - -#define yyerrok (yyerrstatus = 0) -#define yyclearin (yychar = YYEMPTY) -#define YYEMPTY (-2) -#define YYEOF 0 - -#define YYACCEPT goto yyacceptlab -#define YYABORT goto yyabortlab -#define YYERROR goto yyerrorlab - - -/* Like YYERROR except do call yyerror. This remains here temporarily - to ease the transition to the new meaning of YYERROR, for GCC. - Once GCC version 2 has supplanted version 1, this can go. */ - -#define YYFAIL goto yyerrlab - -#define YYRECOVERING() (!!yyerrstatus) - -#define YYBACKUP(Token, Value) \ -do \ - if (yychar == YYEMPTY && yylen == 1) \ - { \ - yychar = (Token); \ - yylval = (Value); \ - yytoken = YYTRANSLATE (yychar); \ - YYPOPSTACK (1); \ - goto yybackup; \ - } \ - else \ - { \ - yyerror (YY_("syntax error: cannot back up")); \ - YYERROR; \ - } \ -while (YYID (0)) - - -#define YYTERROR 1 -#define YYERRCODE 256 - - -/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. - If N is 0, then set CURRENT to the empty location which ends - the previous symbol: RHS[0] (always defined). */ - -#define YYRHSLOC(Rhs, K) ((Rhs)[K]) -#ifndef YYLLOC_DEFAULT -# define YYLLOC_DEFAULT(Current, Rhs, N) \ - do \ - if (YYID (N)) \ - { \ - (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ - (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ - (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ - (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ - } \ - else \ - { \ - (Current).first_line = (Current).last_line = \ - YYRHSLOC (Rhs, 0).last_line; \ - (Current).first_column = (Current).last_column = \ - YYRHSLOC (Rhs, 0).last_column; \ - } \ - while (YYID (0)) -#endif - - -/* YY_LOCATION_PRINT -- Print the location on the stream. - This macro was not mandated originally: define only if we know - we won't break user code: when these are the locations we know. */ - -#ifndef YY_LOCATION_PRINT -# if YYLTYPE_IS_TRIVIAL -# define YY_LOCATION_PRINT(File, Loc) \ - fprintf (File, "%d.%d-%d.%d", \ - (Loc).first_line, (Loc).first_column, \ - (Loc).last_line, (Loc).last_column) -# else -# define YY_LOCATION_PRINT(File, Loc) ((void) 0) -# endif -#endif - - -/* YYLEX -- calling `yylex' with the right arguments. */ - -#ifdef YYLEX_PARAM -# define YYLEX yylex (YYLEX_PARAM) -#else -# define YYLEX yylex () -#endif - -/* Enable debugging if requested. */ -#if YYDEBUG - -# ifndef YYFPRINTF -# include /* INFRINGES ON USER NAME SPACE */ -# define YYFPRINTF fprintf -# endif - -# define YYDPRINTF(Args) \ -do { \ - if (yydebug) \ - YYFPRINTF Args; \ -} while (YYID (0)) - -# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ -do { \ - if (yydebug) \ - { \ - YYFPRINTF (stderr, "%s ", Title); \ - yy_symbol_print (stderr, \ - Type, Value, Location); \ - YYFPRINTF (stderr, "\n"); \ - } \ -} while (YYID (0)) - - -/*--------------------------------. -| Print this symbol on YYOUTPUT. | -`--------------------------------*/ - -/*ARGSUSED*/ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) -#else -static void -yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp) - FILE *yyoutput; - int yytype; - YYSTYPE const * const yyvaluep; - YYLTYPE const * const yylocationp; -#endif -{ - if (!yyvaluep) - return; - YYUSE (yylocationp); -# ifdef YYPRINT - if (yytype < YYNTOKENS) - YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); -# else - YYUSE (yyoutput); -# endif - switch (yytype) - { - default: - break; - } -} - - -/*--------------------------------. -| Print this symbol on YYOUTPUT. | -`--------------------------------*/ - -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) -#else -static void -yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp) - FILE *yyoutput; - int yytype; - YYSTYPE const * const yyvaluep; - YYLTYPE const * const yylocationp; -#endif -{ - if (yytype < YYNTOKENS) - YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); - else - YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); - - YY_LOCATION_PRINT (yyoutput, *yylocationp); - YYFPRINTF (yyoutput, ": "); - yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp); - YYFPRINTF (yyoutput, ")"); -} - -/*------------------------------------------------------------------. -| yy_stack_print -- Print the state stack from its BOTTOM up to its | -| TOP (included). | -`------------------------------------------------------------------*/ - -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) -#else -static void -yy_stack_print (bottom, top) - yytype_int16 *bottom; - yytype_int16 *top; -#endif -{ - YYFPRINTF (stderr, "Stack now"); - for (; bottom <= top; ++bottom) - YYFPRINTF (stderr, " %d", *bottom); - YYFPRINTF (stderr, "\n"); -} - -# define YY_STACK_PRINT(Bottom, Top) \ -do { \ - if (yydebug) \ - yy_stack_print ((Bottom), (Top)); \ -} while (YYID (0)) - - -/*------------------------------------------------. -| Report that the YYRULE is going to be reduced. | -`------------------------------------------------*/ - -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_reduce_print (YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule) -#else -static void -yy_reduce_print (yyvsp, yylsp, yyrule) - YYSTYPE *yyvsp; - YYLTYPE *yylsp; - int yyrule; -#endif -{ - int yynrhs = yyr2[yyrule]; - int yyi; - unsigned long int yylno = yyrline[yyrule]; - YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", - yyrule - 1, yylno); - /* The symbols being reduced. */ - for (yyi = 0; yyi < yynrhs; yyi++) - { - fprintf (stderr, " $%d = ", yyi + 1); - yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], - &(yyvsp[(yyi + 1) - (yynrhs)]) - , &(yylsp[(yyi + 1) - (yynrhs)]) ); - fprintf (stderr, "\n"); - } -} - -# define YY_REDUCE_PRINT(Rule) \ -do { \ - if (yydebug) \ - yy_reduce_print (yyvsp, yylsp, Rule); \ -} while (YYID (0)) - -/* Nonzero means print parse trace. It is left uninitialized so that - multiple parsers can coexist. */ -int yydebug; -#else /* !YYDEBUG */ -# define YYDPRINTF(Args) -# define YY_SYMBOL_PRINT(Title, Type, Value, Location) -# define YY_STACK_PRINT(Bottom, Top) -# define YY_REDUCE_PRINT(Rule) -#endif /* !YYDEBUG */ - - -/* YYINITDEPTH -- initial size of the parser's stacks. */ -#ifndef YYINITDEPTH -# define YYINITDEPTH 200 -#endif - -/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only - if the built-in stack extension method is used). - - Do not make this value too large; the results are undefined if - YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH) - evaluated with infinite-precision integer arithmetic. */ - -#ifndef YYMAXDEPTH -# define YYMAXDEPTH 10000 -#endif - - - -#if YYERROR_VERBOSE - -# ifndef yystrlen -# if defined __GLIBC__ && defined _STRING_H -# define yystrlen strlen -# else -/* Return the length of YYSTR. */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static YYSIZE_T -yystrlen (const char *yystr) -#else -static YYSIZE_T -yystrlen (yystr) - const char *yystr; -#endif -{ - YYSIZE_T yylen; - for (yylen = 0; yystr[yylen]; yylen++) - continue; - return yylen; -} -# endif -# endif - -# ifndef yystpcpy -# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE -# define yystpcpy stpcpy -# else -/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in - YYDEST. */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static char * -yystpcpy (char *yydest, const char *yysrc) -#else -static char * -yystpcpy (yydest, yysrc) - char *yydest; - const char *yysrc; -#endif -{ - char *yyd = yydest; - const char *yys = yysrc; - - while ((*yyd++ = *yys++) != '\0') - continue; - - return yyd - 1; -} -# endif -# endif - -# ifndef yytnamerr -/* Copy to YYRES the contents of YYSTR after stripping away unnecessary - quotes and backslashes, so that it's suitable for yyerror. The - heuristic is that double-quoting is unnecessary unless the string - contains an apostrophe, a comma, or backslash (other than - backslash-backslash). YYSTR is taken from yytname. If YYRES is - null, do not copy; instead, return the length of what the result - would have been. */ -static YYSIZE_T -yytnamerr (char *yyres, const char *yystr) -{ - if (*yystr == '"') - { - YYSIZE_T yyn = 0; - char const *yyp = yystr; - - for (;;) - switch (*++yyp) - { - case '\'': - case ',': - goto do_not_strip_quotes; - - case '\\': - if (*++yyp != '\\') - goto do_not_strip_quotes; - /* Fall through. */ - default: - if (yyres) - yyres[yyn] = *yyp; - yyn++; - break; - - case '"': - if (yyres) - yyres[yyn] = '\0'; - return yyn; - } - do_not_strip_quotes: ; - } - - if (! yyres) - return yystrlen (yystr); - - return yystpcpy (yyres, yystr) - yyres; -} -# endif - -/* Copy into YYRESULT an error message about the unexpected token - YYCHAR while in state YYSTATE. Return the number of bytes copied, - including the terminating null byte. If YYRESULT is null, do not - copy anything; just return the number of bytes that would be - copied. As a special case, return 0 if an ordinary "syntax error" - message will do. Return YYSIZE_MAXIMUM if overflow occurs during - size calculation. */ -static YYSIZE_T -yysyntax_error (char *yyresult, int yystate, int yychar) -{ - int yyn = yypact[yystate]; - - if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) - return 0; - else - { - int yytype = YYTRANSLATE (yychar); - YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); - YYSIZE_T yysize = yysize0; - YYSIZE_T yysize1; - int yysize_overflow = 0; - enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; - char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; - int yyx; - -# if 0 - /* This is so xgettext sees the translatable formats that are - constructed on the fly. */ - YY_("syntax error, unexpected %s"); - YY_("syntax error, unexpected %s, expecting %s"); - YY_("syntax error, unexpected %s, expecting %s or %s"); - YY_("syntax error, unexpected %s, expecting %s or %s or %s"); - YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); -# endif - char *yyfmt; - char const *yyf; - static char const yyunexpected[] = "syntax error, unexpected %s"; - static char const yyexpecting[] = ", expecting %s"; - static char const yyor[] = " or %s"; - char yyformat[sizeof yyunexpected - + sizeof yyexpecting - 1 - + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) - * (sizeof yyor - 1))]; - char const *yyprefix = yyexpecting; - - /* Start YYX at -YYN if negative to avoid negative indexes in - YYCHECK. */ - int yyxbegin = yyn < 0 ? -yyn : 0; - - /* Stay within bounds of both yycheck and yytname. */ - int yychecklim = YYLAST - yyn + 1; - int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; - int yycount = 1; - - yyarg[0] = yytname[yytype]; - yyfmt = yystpcpy (yyformat, yyunexpected); - - for (yyx = yyxbegin; yyx < yyxend; ++yyx) - if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) - { - if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) - { - yycount = 1; - yysize = yysize0; - yyformat[sizeof yyunexpected - 1] = '\0'; - break; - } - yyarg[yycount++] = yytname[yyx]; - yysize1 = yysize + yytnamerr (0, yytname[yyx]); - yysize_overflow |= (yysize1 < yysize); - yysize = yysize1; - yyfmt = yystpcpy (yyfmt, yyprefix); - yyprefix = yyor; - } - - yyf = YY_(yyformat); - yysize1 = yysize + yystrlen (yyf); - yysize_overflow |= (yysize1 < yysize); - yysize = yysize1; - - if (yysize_overflow) - return YYSIZE_MAXIMUM; - - if (yyresult) - { - /* Avoid sprintf, as that infringes on the user's name space. - Don't have undefined behavior even if the translation - produced a string with the wrong number of "%s"s. */ - char *yyp = yyresult; - int yyi = 0; - while ((*yyp = *yyf) != '\0') - { - if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) - { - yyp += yytnamerr (yyp, yyarg[yyi++]); - yyf += 2; - } - else - { - yyp++; - yyf++; - } - } - } - return yysize; - } -} -#endif /* YYERROR_VERBOSE */ - - -/*-----------------------------------------------. -| Release the memory associated to this symbol. | -`-----------------------------------------------*/ - -/*ARGSUSED*/ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp) -#else -static void -yydestruct (yymsg, yytype, yyvaluep, yylocationp) - const char *yymsg; - int yytype; - YYSTYPE *yyvaluep; - YYLTYPE *yylocationp; -#endif -{ - YYUSE (yyvaluep); - YYUSE (yylocationp); - - if (!yymsg) - yymsg = "Deleting"; - YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); - - switch (yytype) - { - - default: - break; - } -} - - -/* Prevent warnings from -Wmissing-prototypes. */ - -#ifdef YYPARSE_PARAM -#if defined __STDC__ || defined __cplusplus -int yyparse (void *YYPARSE_PARAM); -#else -int yyparse (); -#endif -#else /* ! YYPARSE_PARAM */ -#if defined __STDC__ || defined __cplusplus -int yyparse (void); -#else -int yyparse (); -#endif -#endif /* ! YYPARSE_PARAM */ - - - -/* The look-ahead symbol. */ -int yychar; - -/* The semantic value of the look-ahead symbol. */ -YYSTYPE yylval; - -/* Number of syntax errors so far. */ -int yynerrs; -/* Location data for the look-ahead symbol. */ -YYLTYPE yylloc; - - - -/*----------. -| yyparse. | -`----------*/ - -#ifdef YYPARSE_PARAM -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -int -yyparse (void *YYPARSE_PARAM) -#else -int -yyparse (YYPARSE_PARAM) - void *YYPARSE_PARAM; -#endif -#else /* ! YYPARSE_PARAM */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -int -yyparse (void) -#else -int -yyparse () - -#endif -#endif -{ - - int yystate; - int yyn; - int yyresult; - /* Number of tokens to shift before error messages enabled. */ - int yyerrstatus; - /* Look-ahead token as an internal (translated) token number. */ - int yytoken = 0; -#if YYERROR_VERBOSE - /* Buffer for error messages, and its allocated size. */ - char yymsgbuf[128]; - char *yymsg = yymsgbuf; - YYSIZE_T yymsg_alloc = sizeof yymsgbuf; -#endif - - /* Three stacks and their tools: - `yyss': related to states, - `yyvs': related to semantic values, - `yyls': related to locations. - - Refer to the stacks thru separate pointers, to allow yyoverflow - to reallocate them elsewhere. */ - - /* The state stack. */ - yytype_int16 yyssa[YYINITDEPTH]; - yytype_int16 *yyss = yyssa; - yytype_int16 *yyssp; - - /* The semantic value stack. */ - YYSTYPE yyvsa[YYINITDEPTH]; - YYSTYPE *yyvs = yyvsa; - YYSTYPE *yyvsp; - - /* The location stack. */ - YYLTYPE yylsa[YYINITDEPTH]; - YYLTYPE *yyls = yylsa; - YYLTYPE *yylsp; - /* The locations where the error started and ended. */ - YYLTYPE yyerror_range[2]; - -#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N), yylsp -= (N)) - - YYSIZE_T yystacksize = YYINITDEPTH; - - /* The variables used to return semantic value and location from the - action routines. */ - YYSTYPE yyval; - YYLTYPE yyloc; - - /* The number of symbols on the RHS of the reduced rule. - Keep to zero when no symbol should be popped. */ - int yylen = 0; - - YYDPRINTF ((stderr, "Starting parse\n")); - - yystate = 0; - yyerrstatus = 0; - yynerrs = 0; - yychar = YYEMPTY; /* Cause a token to be read. */ - - /* Initialize stack pointers. - Waste one element of value and location stack - so that they stay on the same level as the state stack. - The wasted elements are never initialized. */ - - yyssp = yyss; - yyvsp = yyvs; - yylsp = yyls; -#if YYLTYPE_IS_TRIVIAL - /* Initialize the default location before parsing starts. */ - yylloc.first_line = yylloc.last_line = 1; - yylloc.first_column = yylloc.last_column = 0; -#endif - - goto yysetstate; - -/*------------------------------------------------------------. -| yynewstate -- Push a new state, which is found in yystate. | -`------------------------------------------------------------*/ - yynewstate: - /* In all cases, when you get here, the value and location stacks - have just been pushed. So pushing a state here evens the stacks. */ - yyssp++; - - yysetstate: - *yyssp = yystate; - - if (yyss + yystacksize - 1 <= yyssp) - { - /* Get the current used size of the three stacks, in elements. */ - YYSIZE_T yysize = yyssp - yyss + 1; - -#ifdef yyoverflow - { - /* Give user a chance to reallocate the stack. Use copies of - these so that the &'s don't force the real ones into - memory. */ - YYSTYPE *yyvs1 = yyvs; - yytype_int16 *yyss1 = yyss; - YYLTYPE *yyls1 = yyls; - - /* Each stack pointer address is followed by the size of the - data in use in that stack, in bytes. This used to be a - conditional around just the two extra args, but that might - be undefined if yyoverflow is a macro. */ - yyoverflow (YY_("memory exhausted"), - &yyss1, yysize * sizeof (*yyssp), - &yyvs1, yysize * sizeof (*yyvsp), - &yyls1, yysize * sizeof (*yylsp), - &yystacksize); - yyls = yyls1; - yyss = yyss1; - yyvs = yyvs1; - } -#else /* no yyoverflow */ -# ifndef YYSTACK_RELOCATE - goto yyexhaustedlab; -# else - /* Extend the stack our own way. */ - if (YYMAXDEPTH <= yystacksize) - goto yyexhaustedlab; - yystacksize *= 2; - if (YYMAXDEPTH < yystacksize) - yystacksize = YYMAXDEPTH; - - { - yytype_int16 *yyss1 = yyss; - union yyalloc *yyptr = - (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); - if (! yyptr) - goto yyexhaustedlab; - YYSTACK_RELOCATE (yyss); - YYSTACK_RELOCATE (yyvs); - YYSTACK_RELOCATE (yyls); -# undef YYSTACK_RELOCATE - if (yyss1 != yyssa) - YYSTACK_FREE (yyss1); - } -# endif -#endif /* no yyoverflow */ - - yyssp = yyss + yysize - 1; - yyvsp = yyvs + yysize - 1; - yylsp = yyls + yysize - 1; - - YYDPRINTF ((stderr, "Stack size increased to %lu\n", - (unsigned long int) yystacksize)); - - if (yyss + yystacksize - 1 <= yyssp) - YYABORT; - } - - YYDPRINTF ((stderr, "Entering state %d\n", yystate)); - - goto yybackup; - -/*-----------. -| yybackup. | -`-----------*/ -yybackup: - - /* Do appropriate processing given the current state. Read a - look-ahead token if we need one and don't already have one. */ - - /* First try to decide what to do without reference to look-ahead token. */ - yyn = yypact[yystate]; - if (yyn == YYPACT_NINF) - goto yydefault; - - /* Not known => get a look-ahead token if don't already have one. */ - - /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ - if (yychar == YYEMPTY) - { - YYDPRINTF ((stderr, "Reading a token: ")); - yychar = YYLEX; - } - - if (yychar <= YYEOF) - { - yychar = yytoken = YYEOF; - YYDPRINTF ((stderr, "Now at end of input.\n")); - } - else - { - yytoken = YYTRANSLATE (yychar); - YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); - } - - /* If the proper action on seeing token YYTOKEN is to reduce or to - detect an error, take that action. */ - yyn += yytoken; - if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) - goto yydefault; - yyn = yytable[yyn]; - if (yyn <= 0) - { - if (yyn == 0 || yyn == YYTABLE_NINF) - goto yyerrlab; - yyn = -yyn; - goto yyreduce; - } - - if (yyn == YYFINAL) - YYACCEPT; - - /* Count tokens shifted since error; after three, turn off error - status. */ - if (yyerrstatus) - yyerrstatus--; - - /* Shift the look-ahead token. */ - YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); - - /* Discard the shifted token unless it is eof. */ - if (yychar != YYEOF) - yychar = YYEMPTY; - - yystate = yyn; - *++yyvsp = yylval; - *++yylsp = yylloc; - goto yynewstate; - - -/*-----------------------------------------------------------. -| yydefault -- do the default action for the current state. | -`-----------------------------------------------------------*/ -yydefault: - yyn = yydefact[yystate]; - if (yyn == 0) - goto yyerrlab; - goto yyreduce; - - -/*-----------------------------. -| yyreduce -- Do a reduction. | -`-----------------------------*/ -yyreduce: - /* yyn is the number of a rule to reduce with. */ - yylen = yyr2[yyn]; - - /* If YYLEN is nonzero, implement the default value of the action: - `$$ = $1'. - - Otherwise, the following line sets YYVAL to garbage. - This behavior is undocumented and Bison - users should not rely upon it. Assigning to YYVAL - unconditionally makes the parser a bit smaller, and it avoids a - GCC warning that YYVAL may be used uninitialized. */ - yyval = yyvsp[1-yylen]; - - /* Default location. */ - YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen); - YY_REDUCE_PRINT (yyn); - switch (yyn) - { - case 2: -#line 90 "dtc-parser.y" - { - the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), 0); - ;} - break; - - case 3: -#line 94 "dtc-parser.y" - { - the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node), 0); - ;} - break; - - case 4: -#line 101 "dtc-parser.y" - { - (yyval.re) = NULL; - ;} - break; - - case 5: -#line 105 "dtc-parser.y" - { - (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); - ;} - break; - - case 6: -#line 112 "dtc-parser.y" - { - (yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref)); - ;} - break; - - case 7: -#line 119 "dtc-parser.y" - { - (yyval.re) = NULL; - ;} - break; - - case 8: -#line 123 "dtc-parser.y" - { - (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); - ;} - break; - - case 9: -#line 130 "dtc-parser.y" - { - (yyval.re) = (yyvsp[(1) - (1)].re); - ;} - break; - - case 10: -#line 134 "dtc-parser.y" - { - (yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref)); - ;} - break; - - case 11: -#line 141 "dtc-parser.y" - { - (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64); - ;} - break; - - case 12: -#line 145 "dtc-parser.y" - { - (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64); - ;} - break; - - case 13: -#line 152 "dtc-parser.y" - { - (yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL); - ;} - break; - - case 14: -#line 159 "dtc-parser.y" - { - (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist)); - ;} - break; - - case 15: -#line 166 "dtc-parser.y" - { - (yyval.proplist) = NULL; - ;} - break; - - case 16: -#line 170 "dtc-parser.y" - { - (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist)); - ;} - break; - - case 17: -#line 177 "dtc-parser.y" - { - (yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref)); - ;} - break; - - case 18: -#line 181 "dtc-parser.y" - { - (yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref)); - ;} - break; - - case 19: -#line 188 "dtc-parser.y" - { - (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data)); - ;} - break; - - case 20: -#line 192 "dtc-parser.y" - { - (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); - ;} - break; - - case 21: -#line 196 "dtc-parser.y" - { - (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); - ;} - break; - - case 22: -#line 200 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 23: -#line 204 "dtc-parser.y" - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file((yyvsp[(4) - (9)].data).val, &path); - struct data d = empty_data; - - if ((yyvsp[(6) - (9)].addr) != 0) - if (fseek(file->file, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0) - yyerrorf("Couldn't seek to offset %llu in \"%s\": %s", - (unsigned long long)(yyvsp[(6) - (9)].addr), - (yyvsp[(4) - (9)].data).val, strerror(errno)); - - d = data_copy_file(file->file, (yyvsp[(8) - (9)].addr)); - - (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d); - dtc_close_file(file); - ;} - break; - - case 24: -#line 221 "dtc-parser.y" - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file((yyvsp[(4) - (5)].data).val, &path); - struct data d = empty_data; - - d = data_copy_file(file->file, -1); - - (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d); - dtc_close_file(file); - ;} - break; - - case 25: -#line 232 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 26: -#line 239 "dtc-parser.y" - { - (yyval.data) = empty_data; - ;} - break; - - case 27: -#line 243 "dtc-parser.y" - { - (yyval.data) = (yyvsp[(1) - (2)].data); - ;} - break; - - case 28: -#line 247 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 29: -#line 254 "dtc-parser.y" - { - (yyval.data) = empty_data; - ;} - break; - - case 30: -#line 258 "dtc-parser.y" - { - (yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell)); - ;} - break; - - case 31: -#line 262 "dtc-parser.y" - { - (yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE, - (yyvsp[(2) - (2)].labelref)), -1); - ;} - break; - - case 32: -#line 267 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 33: -#line 274 "dtc-parser.y" - { - (yyval.cbase) = 16; - ;} - break; - - case 35: -#line 282 "dtc-parser.y" - { - (yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32); - ;} - break; - - case 36: -#line 286 "dtc-parser.y" - { - (yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32); - ;} - break; - - case 37: -#line 293 "dtc-parser.y" - { - (yyval.data) = empty_data; - ;} - break; - - case 38: -#line 297 "dtc-parser.y" - { - (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte)); - ;} - break; - - case 39: -#line 301 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 40: -#line 308 "dtc-parser.y" - { - (yyval.nodelist) = NULL; - ;} - break; - - case 41: -#line 312 "dtc-parser.y" - { - (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist)); - ;} - break; - - case 42: -#line 316 "dtc-parser.y" - { - yyerror("syntax error: properties must precede subnodes"); - YYERROR; - ;} - break; - - case 43: -#line 324 "dtc-parser.y" - { - (yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref)); - ;} - break; - - case 44: -#line 331 "dtc-parser.y" - { - (yyval.labelref) = NULL; - ;} - break; - - case 45: -#line 335 "dtc-parser.y" - { - (yyval.labelref) = (yyvsp[(1) - (1)].labelref); - ;} - break; - - -/* Line 1267 of yacc.c. */ -#line 1780 "dtc-parser.tab.c" - default: break; - } - YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); - - YYPOPSTACK (yylen); - yylen = 0; - YY_STACK_PRINT (yyss, yyssp); - - *++yyvsp = yyval; - *++yylsp = yyloc; - - /* Now `shift' the result of the reduction. Determine what state - that goes to, based on the state we popped back to and the rule - number reduced by. */ - - yyn = yyr1[yyn]; - - yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; - if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) - yystate = yytable[yystate]; - else - yystate = yydefgoto[yyn - YYNTOKENS]; - - goto yynewstate; - - -/*------------------------------------. -| yyerrlab -- here on detecting error | -`------------------------------------*/ -yyerrlab: - /* If not already recovering from an error, report this error. */ - if (!yyerrstatus) - { - ++yynerrs; -#if ! YYERROR_VERBOSE - yyerror (YY_("syntax error")); -#else - { - YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); - if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) - { - YYSIZE_T yyalloc = 2 * yysize; - if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) - yyalloc = YYSTACK_ALLOC_MAXIMUM; - if (yymsg != yymsgbuf) - YYSTACK_FREE (yymsg); - yymsg = (char *) YYSTACK_ALLOC (yyalloc); - if (yymsg) - yymsg_alloc = yyalloc; - else - { - yymsg = yymsgbuf; - yymsg_alloc = sizeof yymsgbuf; - } - } - - if (0 < yysize && yysize <= yymsg_alloc) - { - (void) yysyntax_error (yymsg, yystate, yychar); - yyerror (yymsg); - } - else - { - yyerror (YY_("syntax error")); - if (yysize != 0) - goto yyexhaustedlab; - } - } -#endif - } - - yyerror_range[0] = yylloc; - - if (yyerrstatus == 3) - { - /* If just tried and failed to reuse look-ahead token after an - error, discard it. */ - - if (yychar <= YYEOF) - { - /* Return failure if at end of input. */ - if (yychar == YYEOF) - YYABORT; - } - else - { - yydestruct ("Error: discarding", - yytoken, &yylval, &yylloc); - yychar = YYEMPTY; - } - } - - /* Else will try to reuse look-ahead token after shifting the error - token. */ - goto yyerrlab1; - - -/*---------------------------------------------------. -| yyerrorlab -- error raised explicitly by YYERROR. | -`---------------------------------------------------*/ -yyerrorlab: - - /* Pacify compilers like GCC when the user code never invokes - YYERROR and the label yyerrorlab therefore never appears in user - code. */ - if (/*CONSTCOND*/ 0) - goto yyerrorlab; - - yyerror_range[0] = yylsp[1-yylen]; - /* Do not reclaim the symbols of the rule which action triggered - this YYERROR. */ - YYPOPSTACK (yylen); - yylen = 0; - YY_STACK_PRINT (yyss, yyssp); - yystate = *yyssp; - goto yyerrlab1; - - -/*-------------------------------------------------------------. -| yyerrlab1 -- common code for both syntax error and YYERROR. | -`-------------------------------------------------------------*/ -yyerrlab1: - yyerrstatus = 3; /* Each real token shifted decrements this. */ - - for (;;) - { - yyn = yypact[yystate]; - if (yyn != YYPACT_NINF) - { - yyn += YYTERROR; - if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) - { - yyn = yytable[yyn]; - if (0 < yyn) - break; - } - } - - /* Pop the current state because it cannot handle the error token. */ - if (yyssp == yyss) - YYABORT; - - yyerror_range[0] = *yylsp; - yydestruct ("Error: popping", - yystos[yystate], yyvsp, yylsp); - YYPOPSTACK (1); - yystate = *yyssp; - YY_STACK_PRINT (yyss, yyssp); - } - - if (yyn == YYFINAL) - YYACCEPT; - - *++yyvsp = yylval; - - yyerror_range[1] = yylloc; - /* Using YYLLOC is tempting, but would change the location of - the look-ahead. YYLOC is available though. */ - YYLLOC_DEFAULT (yyloc, (yyerror_range - 1), 2); - *++yylsp = yyloc; - - /* Shift the error token. */ - YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); - - yystate = yyn; - goto yynewstate; - - -/*-------------------------------------. -| yyacceptlab -- YYACCEPT comes here. | -`-------------------------------------*/ -yyacceptlab: - yyresult = 0; - goto yyreturn; - -/*-----------------------------------. -| yyabortlab -- YYABORT comes here. | -`-----------------------------------*/ -yyabortlab: - yyresult = 1; - goto yyreturn; - -#ifndef yyoverflow -/*-------------------------------------------------. -| yyexhaustedlab -- memory exhaustion comes here. | -`-------------------------------------------------*/ -yyexhaustedlab: - yyerror (YY_("memory exhausted")); - yyresult = 2; - /* Fall through. */ -#endif - -yyreturn: - if (yychar != YYEOF && yychar != YYEMPTY) - yydestruct ("Cleanup: discarding lookahead", - yytoken, &yylval, &yylloc); - /* Do not reclaim the symbols of the rule which action triggered - this YYABORT or YYACCEPT. */ - YYPOPSTACK (yylen); - YY_STACK_PRINT (yyss, yyssp); - while (yyssp != yyss) - { - yydestruct ("Cleanup: popping", - yystos[*yyssp], yyvsp, yylsp); - YYPOPSTACK (1); - } -#ifndef yyoverflow - if (yyss != yyssa) - YYSTACK_FREE (yyss); -#endif -#if YYERROR_VERBOSE - if (yymsg != yymsgbuf) - YYSTACK_FREE (yymsg); -#endif - /* Make sure YYID is used. */ - return YYID (yyresult); -} - - -#line 340 "dtc-parser.y" - - -void yyerrorf(char const *s, ...) -{ - const char *fname = srcpos_file ? srcpos_file->name : ""; - va_list va; - va_start(va, s); - - if (strcmp(fname, "-") == 0) - fname = "stdin"; - - fprintf(stderr, "%s:%d ", fname, yylloc.first_line); - vfprintf(stderr, s, va); - fprintf(stderr, "\n"); - - treesource_error = 1; - va_end(va); -} - -void yyerror (char const *s) -{ - yyerrorf("%s", s); -} - -static unsigned long long eval_literal(const char *s, int base, int bits) -{ - unsigned long long val; - char *e; - - errno = 0; - val = strtoull(s, &e, base); - if (*e) - yyerror("bad characters in literal"); - else if ((errno == ERANGE) - || ((bits < 64) && (val >= (1ULL << bits)))) - yyerror("literal out of range"); - else if (errno != 0) - yyerror("bad literal"); - return val; -} - diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped 1970-01-01 01:00:00.000000000 +0100 @@ -1,113 +0,0 @@ -/* A Bison parser, made by GNU Bison 2.3. */ - -/* Skeleton interface for Bison's Yacc-like parsers in C - - Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 - Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, - Boston, MA 02110-1301, USA. */ - -/* As a special exception, you may create a larger work that contains - part or all of the Bison parser skeleton and distribute that work - under terms of your choice, so long as that work isn't itself a - parser generator using the skeleton or a modified version thereof - as a parser skeleton. Alternatively, if you modify or redistribute - the parser skeleton itself, you may (at your option) remove this - special exception, which will cause the skeleton and the resulting - Bison output files to be licensed under the GNU General Public - License without this special exception. - - This special exception was added by the Free Software Foundation in - version 2.2 of Bison. */ - -/* Tokens. */ -#ifndef YYTOKENTYPE -# define YYTOKENTYPE - /* Put the tokens into the symbol table, so that GDB and other debuggers - know about them. */ - enum yytokentype { - DT_V1 = 258, - DT_MEMRESERVE = 259, - DT_PROPNODENAME = 260, - DT_LITERAL = 261, - DT_LEGACYLITERAL = 262, - DT_BASE = 263, - DT_BYTE = 264, - DT_STRING = 265, - DT_LABEL = 266, - DT_REF = 267, - DT_INCBIN = 268 - }; -#endif -/* Tokens. */ -#define DT_V1 258 -#define DT_MEMRESERVE 259 -#define DT_PROPNODENAME 260 -#define DT_LITERAL 261 -#define DT_LEGACYLITERAL 262 -#define DT_BASE 263 -#define DT_BYTE 264 -#define DT_STRING 265 -#define DT_LABEL 266 -#define DT_REF 267 -#define DT_INCBIN 268 - - - - -#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED -typedef union YYSTYPE -#line 37 "dtc-parser.y" -{ - char *propnodename; - char *literal; - char *labelref; - unsigned int cbase; - uint8_t byte; - struct data data; - - uint64_t addr; - cell_t cell; - struct property *prop; - struct property *proplist; - struct node *node; - struct node *nodelist; - struct reserve_info *re; -} -/* Line 1489 of yacc.c. */ -#line 92 "dtc-parser.tab.h" - YYSTYPE; -# define yystype YYSTYPE /* obsolescent; will be withdrawn */ -# define YYSTYPE_IS_DECLARED 1 -# define YYSTYPE_IS_TRIVIAL 1 -#endif - -extern YYSTYPE yylval; - -#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED -typedef struct YYLTYPE -{ - int first_line; - int first_column; - int last_line; - int last_column; -} YYLTYPE; -# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ -# define YYLTYPE_IS_DECLARED 1 -# define YYLTYPE_IS_TRIVIAL 1 -#endif - -extern YYLTYPE yylloc; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/dtc-parser.y linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/dtc-parser.y --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/dtc-parser.y 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/dtc-parser.y 1970-01-01 01:00:00.000000000 +0100 @@ -1,379 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -%locations - -%{ -#include - -#include "dtc.h" -#include "srcpos.h" - -extern int yylex(void); - -extern struct boot_info *the_boot_info; -extern int treesource_error; - -static unsigned long long eval_literal(const char *s, int base, int bits); -%} - -%union { - char *propnodename; - char *literal; - char *labelref; - unsigned int cbase; - uint8_t byte; - struct data data; - - uint64_t addr; - cell_t cell; - struct property *prop; - struct property *proplist; - struct node *node; - struct node *nodelist; - struct reserve_info *re; -} - -%token DT_V1 -%token DT_MEMRESERVE -%token DT_PROPNODENAME -%token DT_LITERAL -%token DT_LEGACYLITERAL -%token DT_BASE -%token DT_BYTE -%token DT_STRING -%token DT_LABEL -%token DT_REF -%token DT_INCBIN - -%type propdata -%type propdataprefix -%type memreserve -%type memreserves -%type v0_memreserve -%type v0_memreserves -%type addr -%type celllist -%type cellbase -%type cellval -%type bytestring -%type propdef -%type proplist - -%type devicetree -%type nodedef -%type subnode -%type subnodes -%type label - -%% - -sourcefile: - DT_V1 ';' memreserves devicetree - { - the_boot_info = build_boot_info($3, $4, 0); - } - | v0_memreserves devicetree - { - the_boot_info = build_boot_info($1, $2, 0); - } - ; - -memreserves: - /* empty */ - { - $$ = NULL; - } - | memreserve memreserves - { - $$ = chain_reserve_entry($1, $2); - } - ; - -memreserve: - label DT_MEMRESERVE addr addr ';' - { - $$ = build_reserve_entry($3, $4, $1); - } - ; - -v0_memreserves: - /* empty */ - { - $$ = NULL; - } - | v0_memreserve v0_memreserves - { - $$ = chain_reserve_entry($1, $2); - }; - ; - -v0_memreserve: - memreserve - { - $$ = $1; - } - | label DT_MEMRESERVE addr '-' addr ';' - { - $$ = build_reserve_entry($3, $5 - $3 + 1, $1); - } - ; - -addr: - DT_LITERAL - { - $$ = eval_literal($1, 0, 64); - } - | DT_LEGACYLITERAL - { - $$ = eval_literal($1, 16, 64); - } - ; - -devicetree: - '/' nodedef - { - $$ = name_node($2, "", NULL); - } - ; - -nodedef: - '{' proplist subnodes '}' ';' - { - $$ = build_node($2, $3); - } - ; - -proplist: - /* empty */ - { - $$ = NULL; - } - | proplist propdef - { - $$ = chain_property($2, $1); - } - ; - -propdef: - label DT_PROPNODENAME '=' propdata ';' - { - $$ = build_property($2, $4, $1); - } - | label DT_PROPNODENAME ';' - { - $$ = build_property($2, empty_data, $1); - } - ; - -propdata: - propdataprefix DT_STRING - { - $$ = data_merge($1, $2); - } - | propdataprefix '<' celllist '>' - { - $$ = data_merge($1, $3); - } - | propdataprefix '[' bytestring ']' - { - $$ = data_merge($1, $3); - } - | propdataprefix DT_REF - { - $$ = data_add_marker($1, REF_PATH, $2); - } - | propdataprefix DT_INCBIN '(' DT_STRING ',' addr ',' addr ')' - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file($4.val, &path); - struct data d = empty_data; - - if ($6 != 0) - if (fseek(file->file, $6, SEEK_SET) != 0) - yyerrorf("Couldn't seek to offset %llu in \"%s\": %s", - (unsigned long long)$6, - $4.val, strerror(errno)); - - d = data_copy_file(file->file, $8); - - $$ = data_merge($1, d); - dtc_close_file(file); - } - | propdataprefix DT_INCBIN '(' DT_STRING ')' - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file($4.val, &path); - struct data d = empty_data; - - d = data_copy_file(file->file, -1); - - $$ = data_merge($1, d); - dtc_close_file(file); - } - | propdata DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -propdataprefix: - /* empty */ - { - $$ = empty_data; - } - | propdata ',' - { - $$ = $1; - } - | propdataprefix DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -celllist: - /* empty */ - { - $$ = empty_data; - } - | celllist cellval - { - $$ = data_append_cell($1, $2); - } - | celllist DT_REF - { - $$ = data_append_cell(data_add_marker($1, REF_PHANDLE, - $2), -1); - } - | celllist DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -cellbase: - /* empty */ - { - $$ = 16; - } - | DT_BASE - ; - -cellval: - DT_LITERAL - { - $$ = eval_literal($1, 0, 32); - } - | cellbase DT_LEGACYLITERAL - { - $$ = eval_literal($2, $1, 32); - } - ; - -bytestring: - /* empty */ - { - $$ = empty_data; - } - | bytestring DT_BYTE - { - $$ = data_append_byte($1, $2); - } - | bytestring DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -subnodes: - /* empty */ - { - $$ = NULL; - } - | subnode subnodes - { - $$ = chain_node($1, $2); - } - | subnode propdef - { - yyerror("syntax error: properties must precede subnodes"); - YYERROR; - } - ; - -subnode: - label DT_PROPNODENAME nodedef - { - $$ = name_node($3, $2, $1); - } - ; - -label: - /* empty */ - { - $$ = NULL; - } - | DT_LABEL - { - $$ = $1; - } - ; - -%% - -void yyerrorf(char const *s, ...) -{ - const char *fname = srcpos_file ? srcpos_file->name : ""; - va_list va; - va_start(va, s); - - if (strcmp(fname, "-") == 0) - fname = "stdin"; - - fprintf(stderr, "%s:%d ", fname, yylloc.first_line); - vfprintf(stderr, s, va); - fprintf(stderr, "\n"); - - treesource_error = 1; - va_end(va); -} - -void yyerror (char const *s) -{ - yyerrorf("%s", s); -} - -static unsigned long long eval_literal(const char *s, int base, int bits) -{ - unsigned long long val; - char *e; - - errno = 0; - val = strtoull(s, &e, base); - if (*e) - yyerror("bad characters in literal"); - else if ((errno == ERANGE) - || ((bits < 64) && (val >= (1ULL << bits)))) - yyerror("literal out of range"); - else if (errno != 0) - yyerror("bad literal"); - return val; -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/flattree.c linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/flattree.c --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/flattree.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/flattree.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,906 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -#define FTF_FULLPATH 0x1 -#define FTF_VARALIGN 0x2 -#define FTF_NAMEPROPS 0x4 -#define FTF_BOOTCPUID 0x8 -#define FTF_STRTABSIZE 0x10 -#define FTF_STRUCTSIZE 0x20 -#define FTF_NOPS 0x40 - -static struct version_info { - int version; - int last_comp_version; - int hdr_size; - int flags; -} version_table[] = { - {1, 1, FDT_V1_SIZE, - FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS}, - {2, 1, FDT_V2_SIZE, - FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID}, - {3, 1, FDT_V3_SIZE, - FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID|FTF_STRTABSIZE}, - {16, 16, FDT_V3_SIZE, - FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_NOPS}, - {17, 16, FDT_V17_SIZE, - FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_STRUCTSIZE|FTF_NOPS}, -}; - -struct emitter { - void (*cell)(void *, cell_t); - void (*string)(void *, char *, int); - void (*align)(void *, int); - void (*data)(void *, struct data); - void (*beginnode)(void *, const char *); - void (*endnode)(void *, const char *); - void (*property)(void *, const char *); -}; - -static void bin_emit_cell(void *e, cell_t val) -{ - struct data *dtbuf = e; - - *dtbuf = data_append_cell(*dtbuf, val); -} - -static void bin_emit_string(void *e, char *str, int len) -{ - struct data *dtbuf = e; - - if (len == 0) - len = strlen(str); - - *dtbuf = data_append_data(*dtbuf, str, len); - *dtbuf = data_append_byte(*dtbuf, '\0'); -} - -static void bin_emit_align(void *e, int a) -{ - struct data *dtbuf = e; - - *dtbuf = data_append_align(*dtbuf, a); -} - -static void bin_emit_data(void *e, struct data d) -{ - struct data *dtbuf = e; - - *dtbuf = data_append_data(*dtbuf, d.val, d.len); -} - -static void bin_emit_beginnode(void *e, const char *label) -{ - bin_emit_cell(e, FDT_BEGIN_NODE); -} - -static void bin_emit_endnode(void *e, const char *label) -{ - bin_emit_cell(e, FDT_END_NODE); -} - -static void bin_emit_property(void *e, const char *label) -{ - bin_emit_cell(e, FDT_PROP); -} - -static struct emitter bin_emitter = { - .cell = bin_emit_cell, - .string = bin_emit_string, - .align = bin_emit_align, - .data = bin_emit_data, - .beginnode = bin_emit_beginnode, - .endnode = bin_emit_endnode, - .property = bin_emit_property, -}; - -static void emit_label(FILE *f, const char *prefix, const char *label) -{ - fprintf(f, "\t.globl\t%s_%s\n", prefix, label); - fprintf(f, "%s_%s:\n", prefix, label); - fprintf(f, "_%s_%s:\n", prefix, label); -} - -static void emit_offset_label(FILE *f, const char *label, int offset) -{ - fprintf(f, "\t.globl\t%s\n", label); - fprintf(f, "%s\t= . + %d\n", label, offset); -} - -static void asm_emit_cell(void *e, cell_t val) -{ - FILE *f = e; - - fprintf(f, "\t.long\t0x%x\n", val); -} - -static void asm_emit_string(void *e, char *str, int len) -{ - FILE *f = e; - char c = 0; - - if (len != 0) { - /* XXX: ewww */ - c = str[len]; - str[len] = '\0'; - } - - fprintf(f, "\t.string\t\"%s\"\n", str); - - if (len != 0) { - str[len] = c; - } -} - -static void asm_emit_align(void *e, int a) -{ - FILE *f = e; - - fprintf(f, "\t.balign\t%d\n", a); -} - -static void asm_emit_data(void *e, struct data d) -{ - FILE *f = e; - int off = 0; - struct marker *m = d.markers; - - for_each_marker_of_type(m, LABEL) - emit_offset_label(f, m->ref, m->offset); - - while ((d.len - off) >= sizeof(uint32_t)) { - fprintf(f, "\t.long\t0x%x\n", - fdt32_to_cpu(*((uint32_t *)(d.val+off)))); - off += sizeof(uint32_t); - } - - while ((d.len - off) >= 1) { - fprintf(f, "\t.byte\t0x%hhx\n", d.val[off]); - off += 1; - } - - assert(off == d.len); -} - -static void asm_emit_beginnode(void *e, const char *label) -{ - FILE *f = e; - - if (label) { - fprintf(f, "\t.globl\t%s\n", label); - fprintf(f, "%s:\n", label); - } - fprintf(f, "\t.long\tFDT_BEGIN_NODE\n"); -} - -static void asm_emit_endnode(void *e, const char *label) -{ - FILE *f = e; - - fprintf(f, "\t.long\tFDT_END_NODE\n"); - if (label) { - fprintf(f, "\t.globl\t%s_end\n", label); - fprintf(f, "%s_end:\n", label); - } -} - -static void asm_emit_property(void *e, const char *label) -{ - FILE *f = e; - - if (label) { - fprintf(f, "\t.globl\t%s\n", label); - fprintf(f, "%s:\n", label); - } - fprintf(f, "\t.long\tFDT_PROP\n"); -} - -static struct emitter asm_emitter = { - .cell = asm_emit_cell, - .string = asm_emit_string, - .align = asm_emit_align, - .data = asm_emit_data, - .beginnode = asm_emit_beginnode, - .endnode = asm_emit_endnode, - .property = asm_emit_property, -}; - -static int stringtable_insert(struct data *d, const char *str) -{ - int i; - - /* FIXME: do this more efficiently? */ - - for (i = 0; i < d->len; i++) { - if (streq(str, d->val + i)) - return i; - } - - *d = data_append_data(*d, str, strlen(str)+1); - return i; -} - -static void flatten_tree(struct node *tree, struct emitter *emit, - void *etarget, struct data *strbuf, - struct version_info *vi) -{ - struct property *prop; - struct node *child; - int seen_name_prop = 0; - - emit->beginnode(etarget, tree->label); - - if (vi->flags & FTF_FULLPATH) - emit->string(etarget, tree->fullpath, 0); - else - emit->string(etarget, tree->name, 0); - - emit->align(etarget, sizeof(cell_t)); - - for_each_property(tree, prop) { - int nameoff; - - if (streq(prop->name, "name")) - seen_name_prop = 1; - - nameoff = stringtable_insert(strbuf, prop->name); - - emit->property(etarget, prop->label); - emit->cell(etarget, prop->val.len); - emit->cell(etarget, nameoff); - - if ((vi->flags & FTF_VARALIGN) && (prop->val.len >= 8)) - emit->align(etarget, 8); - - emit->data(etarget, prop->val); - emit->align(etarget, sizeof(cell_t)); - } - - if ((vi->flags & FTF_NAMEPROPS) && !seen_name_prop) { - emit->property(etarget, NULL); - emit->cell(etarget, tree->basenamelen+1); - emit->cell(etarget, stringtable_insert(strbuf, "name")); - - if ((vi->flags & FTF_VARALIGN) && ((tree->basenamelen+1) >= 8)) - emit->align(etarget, 8); - - emit->string(etarget, tree->name, tree->basenamelen); - emit->align(etarget, sizeof(cell_t)); - } - - for_each_child(tree, child) { - flatten_tree(child, emit, etarget, strbuf, vi); - } - - emit->endnode(etarget, tree->label); -} - -static struct data flatten_reserve_list(struct reserve_info *reservelist, - struct version_info *vi) -{ - struct reserve_info *re; - struct data d = empty_data; - static struct fdt_reserve_entry null_re = {0,0}; - int j; - - for (re = reservelist; re; re = re->next) { - d = data_append_re(d, &re->re); - } - /* - * Add additional reserved slots if the user asked for them. - */ - for (j = 0; j < reservenum; j++) { - d = data_append_re(d, &null_re); - } - - return d; -} - -static void make_fdt_header(struct fdt_header *fdt, - struct version_info *vi, - int reservesize, int dtsize, int strsize, - int boot_cpuid_phys) -{ - int reserve_off; - - reservesize += sizeof(struct fdt_reserve_entry); - - memset(fdt, 0xff, sizeof(*fdt)); - - fdt->magic = cpu_to_fdt32(FDT_MAGIC); - fdt->version = cpu_to_fdt32(vi->version); - fdt->last_comp_version = cpu_to_fdt32(vi->last_comp_version); - - /* Reserve map should be doubleword aligned */ - reserve_off = ALIGN(vi->hdr_size, 8); - - fdt->off_mem_rsvmap = cpu_to_fdt32(reserve_off); - fdt->off_dt_struct = cpu_to_fdt32(reserve_off + reservesize); - fdt->off_dt_strings = cpu_to_fdt32(reserve_off + reservesize - + dtsize); - fdt->totalsize = cpu_to_fdt32(reserve_off + reservesize + dtsize + strsize); - - if (vi->flags & FTF_BOOTCPUID) - fdt->boot_cpuid_phys = cpu_to_fdt32(boot_cpuid_phys); - if (vi->flags & FTF_STRTABSIZE) - fdt->size_dt_strings = cpu_to_fdt32(strsize); - if (vi->flags & FTF_STRUCTSIZE) - fdt->size_dt_struct = cpu_to_fdt32(dtsize); -} - -void dt_to_blob(FILE *f, struct boot_info *bi, int version) -{ - struct version_info *vi = NULL; - int i; - struct data blob = empty_data; - struct data reservebuf = empty_data; - struct data dtbuf = empty_data; - struct data strbuf = empty_data; - struct fdt_header fdt; - int padlen = 0; - - for (i = 0; i < ARRAY_SIZE(version_table); i++) { - if (version_table[i].version == version) - vi = &version_table[i]; - } - if (!vi) - die("Unknown device tree blob version %d\n", version); - - flatten_tree(bi->dt, &bin_emitter, &dtbuf, &strbuf, vi); - bin_emit_cell(&dtbuf, FDT_END); - - reservebuf = flatten_reserve_list(bi->reservelist, vi); - - /* Make header */ - make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len, - bi->boot_cpuid_phys); - - /* - * If the user asked for more space than is used, adjust the totalsize. - */ - if (minsize > 0) { - padlen = minsize - fdt32_to_cpu(fdt.totalsize); - if ((padlen < 0) && (quiet < 1)) - fprintf(stderr, - "Warning: blob size %d >= minimum size %d\n", - fdt32_to_cpu(fdt.totalsize), minsize); - } - - if (padsize > 0) - padlen = padsize; - - if (padlen > 0) { - int tsize = fdt32_to_cpu(fdt.totalsize); - tsize += padlen; - fdt.totalsize = cpu_to_fdt32(tsize); - } - - /* - * Assemble the blob: start with the header, add with alignment - * the reserve buffer, add the reserve map terminating zeroes, - * the device tree itself, and finally the strings. - */ - blob = data_append_data(blob, &fdt, vi->hdr_size); - blob = data_append_align(blob, 8); - blob = data_merge(blob, reservebuf); - blob = data_append_zeroes(blob, sizeof(struct fdt_reserve_entry)); - blob = data_merge(blob, dtbuf); - blob = data_merge(blob, strbuf); - - /* - * If the user asked for more space than is used, pad out the blob. - */ - if (padlen > 0) - blob = data_append_zeroes(blob, padlen); - - fwrite(blob.val, blob.len, 1, f); - - if (ferror(f)) - die("Error writing device tree blob: %s\n", strerror(errno)); - - /* - * data_merge() frees the right-hand element so only the blob - * remains to be freed. - */ - data_free(blob); -} - -static void dump_stringtable_asm(FILE *f, struct data strbuf) -{ - const char *p; - int len; - - p = strbuf.val; - - while (p < (strbuf.val + strbuf.len)) { - len = strlen(p); - fprintf(f, "\t.string \"%s\"\n", p); - p += len+1; - } -} - -void dt_to_asm(FILE *f, struct boot_info *bi, int version) -{ - struct version_info *vi = NULL; - int i; - struct data strbuf = empty_data; - struct reserve_info *re; - const char *symprefix = "dt"; - - for (i = 0; i < ARRAY_SIZE(version_table); i++) { - if (version_table[i].version == version) - vi = &version_table[i]; - } - if (!vi) - die("Unknown device tree blob version %d\n", version); - - fprintf(f, "/* autogenerated by dtc, do not edit */\n\n"); - fprintf(f, "#define FDT_MAGIC 0x%x\n", FDT_MAGIC); - fprintf(f, "#define FDT_BEGIN_NODE 0x%x\n", FDT_BEGIN_NODE); - fprintf(f, "#define FDT_END_NODE 0x%x\n", FDT_END_NODE); - fprintf(f, "#define FDT_PROP 0x%x\n", FDT_PROP); - fprintf(f, "#define FDT_END 0x%x\n", FDT_END); - fprintf(f, "\n"); - - emit_label(f, symprefix, "blob_start"); - emit_label(f, symprefix, "header"); - fprintf(f, "\t.long\tFDT_MAGIC\t\t\t\t/* magic */\n"); - fprintf(f, "\t.long\t_%s_blob_abs_end - _%s_blob_start\t/* totalsize */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t_%s_struct_start - _%s_blob_start\t/* off_dt_struct */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t_%s_strings_start - _%s_blob_start\t/* off_dt_strings */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t_%s_reserve_map - _%s_blob_start\t/* off_dt_strings */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t%d\t\t\t\t\t/* version */\n", vi->version); - fprintf(f, "\t.long\t%d\t\t\t\t\t/* last_comp_version */\n", - vi->last_comp_version); - - if (vi->flags & FTF_BOOTCPUID) - fprintf(f, "\t.long\t%i\t\t\t\t\t/* boot_cpuid_phys */\n", - bi->boot_cpuid_phys); - - if (vi->flags & FTF_STRTABSIZE) - fprintf(f, "\t.long\t_%s_strings_end - _%s_strings_start\t/* size_dt_strings */\n", - symprefix, symprefix); - - if (vi->flags & FTF_STRUCTSIZE) - fprintf(f, "\t.long\t_%s_struct_end - _%s_struct_start\t/* size_dt_struct */\n", - symprefix, symprefix); - - /* - * Reserve map entries. - * Align the reserve map to a doubleword boundary. - * Each entry is an (address, size) pair of u64 values. - * Always supply a zero-sized temination entry. - */ - asm_emit_align(f, 8); - emit_label(f, symprefix, "reserve_map"); - - fprintf(f, "/* Memory reserve map from source file */\n"); - - /* - * Use .long on high and low halfs of u64s to avoid .quad - * as it appears .quad isn't available in some assemblers. - */ - for (re = bi->reservelist; re; re = re->next) { - if (re->label) { - fprintf(f, "\t.globl\t%s\n", re->label); - fprintf(f, "%s:\n", re->label); - } - fprintf(f, "\t.long\t0x%08x, 0x%08x\n", - (unsigned int)(re->re.address >> 32), - (unsigned int)(re->re.address & 0xffffffff)); - fprintf(f, "\t.long\t0x%08x, 0x%08x\n", - (unsigned int)(re->re.size >> 32), - (unsigned int)(re->re.size & 0xffffffff)); - } - for (i = 0; i < reservenum; i++) { - fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); - } - - fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); - - emit_label(f, symprefix, "struct_start"); - flatten_tree(bi->dt, &asm_emitter, f, &strbuf, vi); - fprintf(f, "\t.long\tFDT_END\n"); - emit_label(f, symprefix, "struct_end"); - - emit_label(f, symprefix, "strings_start"); - dump_stringtable_asm(f, strbuf); - emit_label(f, symprefix, "strings_end"); - - emit_label(f, symprefix, "blob_end"); - - /* - * If the user asked for more space than is used, pad it out. - */ - if (minsize > 0) { - fprintf(f, "\t.space\t%d - (_%s_blob_end - _%s_blob_start), 0\n", - minsize, symprefix, symprefix); - } - if (padsize > 0) { - fprintf(f, "\t.space\t%d, 0\n", padsize); - } - emit_label(f, symprefix, "blob_abs_end"); - - data_free(strbuf); -} - -struct inbuf { - char *base, *limit, *ptr; -}; - -static void inbuf_init(struct inbuf *inb, void *base, void *limit) -{ - inb->base = base; - inb->limit = limit; - inb->ptr = inb->base; -} - -static void flat_read_chunk(struct inbuf *inb, void *p, int len) -{ - if ((inb->ptr + len) > inb->limit) - die("Premature end of data parsing flat device tree\n"); - - memcpy(p, inb->ptr, len); - - inb->ptr += len; -} - -static uint32_t flat_read_word(struct inbuf *inb) -{ - uint32_t val; - - assert(((inb->ptr - inb->base) % sizeof(val)) == 0); - - flat_read_chunk(inb, &val, sizeof(val)); - - return fdt32_to_cpu(val); -} - -static void flat_realign(struct inbuf *inb, int align) -{ - int off = inb->ptr - inb->base; - - inb->ptr = inb->base + ALIGN(off, align); - if (inb->ptr > inb->limit) - die("Premature end of data parsing flat device tree\n"); -} - -static char *flat_read_string(struct inbuf *inb) -{ - int len = 0; - const char *p = inb->ptr; - char *str; - - do { - if (p >= inb->limit) - die("Premature end of data parsing flat device tree\n"); - len++; - } while ((*p++) != '\0'); - - str = strdup(inb->ptr); - - inb->ptr += len; - - flat_realign(inb, sizeof(uint32_t)); - - return str; -} - -static struct data flat_read_data(struct inbuf *inb, int len) -{ - struct data d = empty_data; - - if (len == 0) - return empty_data; - - d = data_grow_for(d, len); - d.len = len; - - flat_read_chunk(inb, d.val, len); - - flat_realign(inb, sizeof(uint32_t)); - - return d; -} - -static char *flat_read_stringtable(struct inbuf *inb, int offset) -{ - const char *p; - - p = inb->base + offset; - while (1) { - if (p >= inb->limit || p < inb->base) - die("String offset %d overruns string table\n", - offset); - - if (*p == '\0') - break; - - p++; - } - - return strdup(inb->base + offset); -} - -static struct property *flat_read_property(struct inbuf *dtbuf, - struct inbuf *strbuf, int flags) -{ - uint32_t proplen, stroff; - char *name; - struct data val; - - proplen = flat_read_word(dtbuf); - stroff = flat_read_word(dtbuf); - - name = flat_read_stringtable(strbuf, stroff); - - if ((flags & FTF_VARALIGN) && (proplen >= 8)) - flat_realign(dtbuf, 8); - - val = flat_read_data(dtbuf, proplen); - - return build_property(name, val, NULL); -} - - -static struct reserve_info *flat_read_mem_reserve(struct inbuf *inb) -{ - struct reserve_info *reservelist = NULL; - struct reserve_info *new; - const char *p; - struct fdt_reserve_entry re; - - /* - * Each entry is a pair of u64 (addr, size) values for 4 cell_t's. - * List terminates at an entry with size equal to zero. - * - * First pass, count entries. - */ - p = inb->ptr; - while (1) { - flat_read_chunk(inb, &re, sizeof(re)); - re.address = fdt64_to_cpu(re.address); - re.size = fdt64_to_cpu(re.size); - if (re.size == 0) - break; - - new = build_reserve_entry(re.address, re.size, NULL); - reservelist = add_reserve_entry(reservelist, new); - } - - return reservelist; -} - - -static char *nodename_from_path(const char *ppath, const char *cpath) -{ - int plen; - - plen = strlen(ppath); - - if (!strneq(ppath, cpath, plen)) - die("Path \"%s\" is not valid as a child of \"%s\"\n", - cpath, ppath); - - /* root node is a special case */ - if (!streq(ppath, "/")) - plen++; - - return strdup(cpath + plen); -} - -static struct node *unflatten_tree(struct inbuf *dtbuf, - struct inbuf *strbuf, - const char *parent_flatname, int flags) -{ - struct node *node; - char *flatname; - uint32_t val; - - node = build_node(NULL, NULL); - - flatname = flat_read_string(dtbuf); - - if (flags & FTF_FULLPATH) - node->name = nodename_from_path(parent_flatname, flatname); - else - node->name = flatname; - - do { - struct property *prop; - struct node *child; - - val = flat_read_word(dtbuf); - switch (val) { - case FDT_PROP: - if (node->children) - fprintf(stderr, "Warning: Flat tree input has " - "subnodes preceding a property.\n"); - prop = flat_read_property(dtbuf, strbuf, flags); - add_property(node, prop); - break; - - case FDT_BEGIN_NODE: - child = unflatten_tree(dtbuf,strbuf, flatname, flags); - add_child(node, child); - break; - - case FDT_END_NODE: - break; - - case FDT_END: - die("Premature FDT_END in device tree blob\n"); - break; - - case FDT_NOP: - if (!(flags & FTF_NOPS)) - fprintf(stderr, "Warning: NOP tag found in flat tree" - " version <16\n"); - - /* Ignore */ - break; - - default: - die("Invalid opcode word %08x in device tree blob\n", - val); - } - } while (val != FDT_END_NODE); - - return node; -} - - -struct boot_info *dt_from_blob(const char *fname) -{ - struct dtc_file *dtcf; - uint32_t magic, totalsize, version, size_dt, boot_cpuid_phys; - uint32_t off_dt, off_str, off_mem_rsvmap; - int rc; - char *blob; - struct fdt_header *fdt; - char *p; - struct inbuf dtbuf, strbuf; - struct inbuf memresvbuf; - int sizeleft; - struct reserve_info *reservelist; - struct node *tree; - uint32_t val; - int flags = 0; - - dtcf = dtc_open_file(fname, NULL); - - rc = fread(&magic, sizeof(magic), 1, dtcf->file); - if (ferror(dtcf->file)) - die("Error reading DT blob magic number: %s\n", - strerror(errno)); - if (rc < 1) { - if (feof(dtcf->file)) - die("EOF reading DT blob magic number\n"); - else - die("Mysterious short read reading magic number\n"); - } - - magic = fdt32_to_cpu(magic); - if (magic != FDT_MAGIC) - die("Blob has incorrect magic number\n"); - - rc = fread(&totalsize, sizeof(totalsize), 1, dtcf->file); - if (ferror(dtcf->file)) - die("Error reading DT blob size: %s\n", strerror(errno)); - if (rc < 1) { - if (feof(dtcf->file)) - die("EOF reading DT blob size\n"); - else - die("Mysterious short read reading blob size\n"); - } - - totalsize = fdt32_to_cpu(totalsize); - if (totalsize < FDT_V1_SIZE) - die("DT blob size (%d) is too small\n", totalsize); - - blob = xmalloc(totalsize); - - fdt = (struct fdt_header *)blob; - fdt->magic = cpu_to_fdt32(magic); - fdt->totalsize = cpu_to_fdt32(totalsize); - - sizeleft = totalsize - sizeof(magic) - sizeof(totalsize); - p = blob + sizeof(magic) + sizeof(totalsize); - - while (sizeleft) { - if (feof(dtcf->file)) - die("EOF before reading %d bytes of DT blob\n", - totalsize); - - rc = fread(p, 1, sizeleft, dtcf->file); - if (ferror(dtcf->file)) - die("Error reading DT blob: %s\n", - strerror(errno)); - - sizeleft -= rc; - p += rc; - } - - off_dt = fdt32_to_cpu(fdt->off_dt_struct); - off_str = fdt32_to_cpu(fdt->off_dt_strings); - off_mem_rsvmap = fdt32_to_cpu(fdt->off_mem_rsvmap); - version = fdt32_to_cpu(fdt->version); - boot_cpuid_phys = fdt32_to_cpu(fdt->boot_cpuid_phys); - - if (off_mem_rsvmap >= totalsize) - die("Mem Reserve structure offset exceeds total size\n"); - - if (off_dt >= totalsize) - die("DT structure offset exceeds total size\n"); - - if (off_str > totalsize) - die("String table offset exceeds total size\n"); - - if (version >= 3) { - uint32_t size_str = fdt32_to_cpu(fdt->size_dt_strings); - if (off_str+size_str > totalsize) - die("String table extends past total size\n"); - inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str); - } else { - inbuf_init(&strbuf, blob + off_str, blob + totalsize); - } - - if (version >= 17) { - size_dt = fdt32_to_cpu(fdt->size_dt_struct); - if (off_dt+size_dt > totalsize) - die("Structure block extends past total size\n"); - } - - if (version < 16) { - flags |= FTF_FULLPATH | FTF_NAMEPROPS | FTF_VARALIGN; - } else { - flags |= FTF_NOPS; - } - - inbuf_init(&memresvbuf, - blob + off_mem_rsvmap, blob + totalsize); - inbuf_init(&dtbuf, blob + off_dt, blob + totalsize); - - reservelist = flat_read_mem_reserve(&memresvbuf); - - val = flat_read_word(&dtbuf); - - if (val != FDT_BEGIN_NODE) - die("Device tree blob doesn't begin with FDT_BEGIN_NODE (begins with 0x%08x)\n", val); - - tree = unflatten_tree(&dtbuf, &strbuf, "", flags); - - val = flat_read_word(&dtbuf); - if (val != FDT_END) - die("Device tree blob doesn't end with FDT_END\n"); - - free(blob); - - dtc_close_file(dtcf); - - return build_boot_info(reservelist, tree, boot_cpuid_phys); -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/fstree.c linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/fstree.c --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/fstree.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/fstree.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,92 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -#include -#include - -static struct node *read_fstree(const char *dirname) -{ - DIR *d; - struct dirent *de; - struct stat st; - struct node *tree; - - d = opendir(dirname); - if (!d) - die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno)); - - tree = build_node(NULL, NULL); - - while ((de = readdir(d)) != NULL) { - char *tmpnam; - - if (streq(de->d_name, ".") - || streq(de->d_name, "..")) - continue; - - tmpnam = join_path(dirname, de->d_name); - - if (lstat(tmpnam, &st) < 0) - die("stat(%s): %s\n", tmpnam, strerror(errno)); - - if (S_ISREG(st.st_mode)) { - struct property *prop; - FILE *pfile; - - pfile = fopen(tmpnam, "r"); - if (! pfile) { - fprintf(stderr, - "WARNING: Cannot open %s: %s\n", - tmpnam, strerror(errno)); - } else { - prop = build_property(strdup(de->d_name), - data_copy_file(pfile, - st.st_size), - NULL); - add_property(tree, prop); - fclose(pfile); - } - } else if (S_ISDIR(st.st_mode)) { - struct node *newchild; - - newchild = read_fstree(tmpnam); - newchild = name_node(newchild, strdup(de->d_name), - NULL); - add_child(tree, newchild); - } - - free(tmpnam); - } - - return tree; -} - -struct boot_info *dt_from_fs(const char *dirname) -{ - struct node *tree; - - tree = read_fstree(dirname); - tree = name_node(tree, "", NULL); - - return build_boot_info(NULL, tree, 0); -} - diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/libfdt_env.h linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/libfdt_env.h --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/libfdt_env.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/libfdt_env.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,23 +0,0 @@ -#ifndef _LIBFDT_ENV_H -#define _LIBFDT_ENV_H - -#include -#include -#include - -#define _B(n) ((unsigned long long)((uint8_t *)&x)[n]) -static inline uint32_t fdt32_to_cpu(uint32_t x) -{ - return (_B(0) << 24) | (_B(1) << 16) | (_B(2) << 8) | _B(3); -} -#define cpu_to_fdt32(x) fdt32_to_cpu(x) - -static inline uint64_t fdt64_to_cpu(uint64_t x) -{ - return (_B(0) << 56) | (_B(1) << 48) | (_B(2) << 40) | (_B(3) << 32) - | (_B(4) << 24) | (_B(5) << 16) | (_B(6) << 8) | _B(7); -} -#define cpu_to_fdt64(x) fdt64_to_cpu(x) -#undef _B - -#endif /* _LIBFDT_ENV_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/livetree.c linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/livetree.c --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/livetree.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/livetree.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,308 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -/* - * Tree building functions - */ - -struct property *build_property(char *name, struct data val, char *label) -{ - struct property *new = xmalloc(sizeof(*new)); - - new->name = name; - new->val = val; - - new->next = NULL; - - new->label = label; - - return new; -} - -struct property *chain_property(struct property *first, struct property *list) -{ - assert(first->next == NULL); - - first->next = list; - return first; -} - -struct property *reverse_properties(struct property *first) -{ - struct property *p = first; - struct property *head = NULL; - struct property *next; - - while (p) { - next = p->next; - p->next = head; - head = p; - p = next; - } - return head; -} - -struct node *build_node(struct property *proplist, struct node *children) -{ - struct node *new = xmalloc(sizeof(*new)); - struct node *child; - - memset(new, 0, sizeof(*new)); - - new->proplist = reverse_properties(proplist); - new->children = children; - - for_each_child(new, child) { - child->parent = new; - } - - return new; -} - -struct node *name_node(struct node *node, char *name, char * label) -{ - assert(node->name == NULL); - - node->name = name; - - node->label = label; - - return node; -} - -struct node *chain_node(struct node *first, struct node *list) -{ - assert(first->next_sibling == NULL); - - first->next_sibling = list; - return first; -} - -void add_property(struct node *node, struct property *prop) -{ - struct property **p; - - prop->next = NULL; - - p = &node->proplist; - while (*p) - p = &((*p)->next); - - *p = prop; -} - -void add_child(struct node *parent, struct node *child) -{ - struct node **p; - - child->next_sibling = NULL; - child->parent = parent; - - p = &parent->children; - while (*p) - p = &((*p)->next_sibling); - - *p = child; -} - -struct reserve_info *build_reserve_entry(uint64_t address, uint64_t size, - char *label) -{ - struct reserve_info *new = xmalloc(sizeof(*new)); - - new->re.address = address; - new->re.size = size; - - new->next = NULL; - - new->label = label; - - return new; -} - -struct reserve_info *chain_reserve_entry(struct reserve_info *first, - struct reserve_info *list) -{ - assert(first->next == NULL); - - first->next = list; - return first; -} - -struct reserve_info *add_reserve_entry(struct reserve_info *list, - struct reserve_info *new) -{ - struct reserve_info *last; - - new->next = NULL; - - if (! list) - return new; - - for (last = list; last->next; last = last->next) - ; - - last->next = new; - - return list; -} - -struct boot_info *build_boot_info(struct reserve_info *reservelist, - struct node *tree, uint32_t boot_cpuid_phys) -{ - struct boot_info *bi; - - bi = xmalloc(sizeof(*bi)); - bi->reservelist = reservelist; - bi->dt = tree; - bi->boot_cpuid_phys = boot_cpuid_phys; - - return bi; -} - -/* - * Tree accessor functions - */ - -const char *get_unitname(struct node *node) -{ - if (node->name[node->basenamelen] == '\0') - return ""; - else - return node->name + node->basenamelen + 1; -} - -struct property *get_property(struct node *node, const char *propname) -{ - struct property *prop; - - for_each_property(node, prop) - if (streq(prop->name, propname)) - return prop; - - return NULL; -} - -cell_t propval_cell(struct property *prop) -{ - assert(prop->val.len == sizeof(cell_t)); - return fdt32_to_cpu(*((cell_t *)prop->val.val)); -} - -struct node *get_subnode(struct node *node, const char *nodename) -{ - struct node *child; - - for_each_child(node, child) - if (streq(child->name, nodename)) - return child; - - return NULL; -} - -struct node *get_node_by_path(struct node *tree, const char *path) -{ - const char *p; - struct node *child; - - if (!path || ! (*path)) - return tree; - - while (path[0] == '/') - path++; - - p = strchr(path, '/'); - - for_each_child(tree, child) { - if (p && strneq(path, child->name, p-path)) - return get_node_by_path(child, p+1); - else if (!p && streq(path, child->name)) - return child; - } - - return NULL; -} - -struct node *get_node_by_label(struct node *tree, const char *label) -{ - struct node *child, *node; - - assert(label && (strlen(label) > 0)); - - if (tree->label && streq(tree->label, label)) - return tree; - - for_each_child(tree, child) { - node = get_node_by_label(child, label); - if (node) - return node; - } - - return NULL; -} - -struct node *get_node_by_phandle(struct node *tree, cell_t phandle) -{ - struct node *child, *node; - - assert((phandle != 0) && (phandle != -1)); - - if (tree->phandle == phandle) - return tree; - - for_each_child(tree, child) { - node = get_node_by_phandle(child, phandle); - if (node) - return node; - } - - return NULL; -} - -struct node *get_node_by_ref(struct node *tree, const char *ref) -{ - if (ref[0] == '/') - return get_node_by_path(tree, ref); - else - return get_node_by_label(tree, ref); -} - -cell_t get_node_phandle(struct node *root, struct node *node) -{ - static cell_t phandle = 1; /* FIXME: ick, static local */ - - if ((node->phandle != 0) && (node->phandle != -1)) - return node->phandle; - - assert(! get_property(node, "linux,phandle")); - - while (get_node_by_phandle(root, phandle)) - phandle++; - - node->phandle = phandle; - add_property(node, - build_property("linux,phandle", - data_append_cell(empty_data, phandle), - NULL)); - - return node->phandle; -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/Makefile.dtc linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/Makefile.dtc --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/Makefile.dtc 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/Makefile.dtc 1970-01-01 01:00:00.000000000 +0100 @@ -1,9 +0,0 @@ -# Makefile.dtc -# -# This is not a complete Makefile of itself. Instead, it is designed to -# be easily embeddable into other systems of Makefiles. -# -DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \ - checks.c -DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c -DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/srcpos.c linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/srcpos.c --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/srcpos.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/srcpos.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,116 +0,0 @@ -/* - * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -/* - * Like yylineno, this is the current open file pos. - */ - -struct dtc_file *srcpos_file; - -static int dtc_open_one(struct dtc_file *file, - const char *search, - const char *fname) -{ - char *fullname; - - if (search) { - fullname = xmalloc(strlen(search) + strlen(fname) + 2); - - strcpy(fullname, search); - strcat(fullname, "/"); - strcat(fullname, fname); - } else { - fullname = strdup(fname); - } - - file->file = fopen(fullname, "r"); - if (!file->file) { - free(fullname); - return 0; - } - - file->name = fullname; - return 1; -} - - -struct dtc_file *dtc_open_file(const char *fname, - const struct search_path *search) -{ - static const struct search_path default_search = { NULL, NULL, NULL }; - - struct dtc_file *file; - const char *slash; - - file = xmalloc(sizeof(struct dtc_file)); - - slash = strrchr(fname, '/'); - if (slash) { - char *dir = xmalloc(slash - fname + 1); - - memcpy(dir, fname, slash - fname); - dir[slash - fname] = 0; - file->dir = dir; - } else { - file->dir = NULL; - } - - if (streq(fname, "-")) { - file->name = "stdin"; - file->file = stdin; - return file; - } - - if (fname[0] == '/') { - file->file = fopen(fname, "r"); - if (!file->file) - goto fail; - - file->name = strdup(fname); - return file; - } - - if (!search) - search = &default_search; - - while (search) { - if (dtc_open_one(file, search->dir, fname)) - return file; - - if (errno != ENOENT) - goto fail; - - search = search->next; - } - -fail: - die("Couldn't open \"%s\": %s\n", fname, strerror(errno)); -} - -void dtc_close_file(struct dtc_file *file) -{ - if (fclose(file->file)) - die("Error closing \"%s\": %s\n", file->name, strerror(errno)); - - free(file->dir); - free(file); -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/srcpos.h linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/srcpos.h --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/srcpos.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/srcpos.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,85 +0,0 @@ -/* - * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -/* - * Augment the standard YYLTYPE with a filenum index into an - * array of all opened filenames. - */ - -#include - -struct dtc_file { - char *dir; - const char *name; - FILE *file; -}; - -#if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED) -typedef struct YYLTYPE { - int first_line; - int first_column; - int last_line; - int last_column; - struct dtc_file *file; -} YYLTYPE; - -#define YYLTYPE_IS_DECLARED 1 -#define YYLTYPE_IS_TRIVIAL 1 -#endif - -/* Cater to old parser templates. */ -#ifndef YYID -#define YYID(n) (n) -#endif - -#define YYLLOC_DEFAULT(Current, Rhs, N) \ - do \ - if (YYID (N)) \ - { \ - (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ - (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ - (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ - (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ - (Current).file = YYRHSLOC (Rhs, N).file; \ - } \ - else \ - { \ - (Current).first_line = (Current).last_line = \ - YYRHSLOC (Rhs, 0).last_line; \ - (Current).first_column = (Current).last_column = \ - YYRHSLOC (Rhs, 0).last_column; \ - (Current).file = YYRHSLOC (Rhs, 0).file; \ - } \ - while (YYID (0)) - - - -extern void yyerror(char const *); -extern void yyerrorf(char const *, ...) __attribute__((format(printf, 1, 2))); - -extern struct dtc_file *srcpos_file; - -struct search_path { - const char *dir; /* NULL for current directory */ - struct search_path *prev, *next; -}; - -extern struct dtc_file *dtc_open_file(const char *fname, - const struct search_path *search); -extern void dtc_close_file(struct dtc_file *file); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/treesource.c linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/treesource.c --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/treesource.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/treesource.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,278 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -extern FILE *yyin; -extern int yyparse(void); - -struct boot_info *the_boot_info; -int treesource_error; - -struct boot_info *dt_from_source(const char *fname) -{ - the_boot_info = NULL; - treesource_error = 0; - - srcpos_file = dtc_open_file(fname, NULL); - yyin = srcpos_file->file; - - if (yyparse() != 0) - die("Unable to parse input tree\n"); - - if (treesource_error) - die("Syntax error parsing input tree\n"); - - return the_boot_info; -} - -static void write_prefix(FILE *f, int level) -{ - int i; - - for (i = 0; i < level; i++) - fputc('\t', f); -} - -int isstring(char c) -{ - return (isprint(c) - || (c == '\0') - || strchr("\a\b\t\n\v\f\r", c)); -} - -static void write_propval_string(FILE *f, struct data val) -{ - const char *str = val.val; - int i; - int newchunk = 1; - struct marker *m = val.markers; - - assert(str[val.len-1] == '\0'); - - for (i = 0; i < (val.len-1); i++) { - char c = str[i]; - - if (newchunk) { - while (m && (m->offset <= i)) { - if (m->type == LABEL) { - assert(m->offset == i); - fprintf(f, "%s: ", m->ref); - } - m = m->next; - } - fprintf(f, "\""); - newchunk = 0; - } - - switch (c) { - case '\a': - fprintf(f, "\\a"); - break; - case '\b': - fprintf(f, "\\b"); - break; - case '\t': - fprintf(f, "\\t"); - break; - case '\n': - fprintf(f, "\\n"); - break; - case '\v': - fprintf(f, "\\v"); - break; - case '\f': - fprintf(f, "\\f"); - break; - case '\r': - fprintf(f, "\\r"); - break; - case '\\': - fprintf(f, "\\\\"); - break; - case '\"': - fprintf(f, "\\\""); - break; - case '\0': - fprintf(f, "\", "); - newchunk = 1; - break; - default: - if (isprint(c)) - fprintf(f, "%c", c); - else - fprintf(f, "\\x%02hhx", c); - } - } - fprintf(f, "\""); - - /* Wrap up any labels at the end of the value */ - for_each_marker_of_type(m, LABEL) { - assert (m->offset == val.len); - fprintf(f, " %s:", m->ref); - } -} - -static void write_propval_cells(FILE *f, struct data val) -{ - void *propend = val.val + val.len; - cell_t *cp = (cell_t *)val.val; - struct marker *m = val.markers; - - fprintf(f, "<"); - for (;;) { - while (m && (m->offset <= ((char *)cp - val.val))) { - if (m->type == LABEL) { - assert(m->offset == ((char *)cp - val.val)); - fprintf(f, "%s: ", m->ref); - } - m = m->next; - } - - fprintf(f, "0x%x", fdt32_to_cpu(*cp++)); - if ((void *)cp >= propend) - break; - fprintf(f, " "); - } - - /* Wrap up any labels at the end of the value */ - for_each_marker_of_type(m, LABEL) { - assert (m->offset == val.len); - fprintf(f, " %s:", m->ref); - } - fprintf(f, ">"); -} - -static void write_propval_bytes(FILE *f, struct data val) -{ - void *propend = val.val + val.len; - const char *bp = val.val; - struct marker *m = val.markers; - - fprintf(f, "["); - for (;;) { - while (m && (m->offset == (bp-val.val))) { - if (m->type == LABEL) - fprintf(f, "%s: ", m->ref); - m = m->next; - } - - fprintf(f, "%02hhx", *bp++); - if ((const void *)bp >= propend) - break; - fprintf(f, " "); - } - - /* Wrap up any labels at the end of the value */ - for_each_marker_of_type(m, LABEL) { - assert (m->offset == val.len); - fprintf(f, " %s:", m->ref); - } - fprintf(f, "]"); -} - -static void write_propval(FILE *f, struct property *prop) -{ - int len = prop->val.len; - const char *p = prop->val.val; - struct marker *m = prop->val.markers; - int nnotstring = 0, nnul = 0; - int nnotstringlbl = 0, nnotcelllbl = 0; - int i; - - if (len == 0) { - fprintf(f, ";\n"); - return; - } - - for (i = 0; i < len; i++) { - if (! isstring(p[i])) - nnotstring++; - if (p[i] == '\0') - nnul++; - } - - for_each_marker_of_type(m, LABEL) { - if ((m->offset > 0) && (prop->val.val[m->offset - 1] != '\0')) - nnotstringlbl++; - if ((m->offset % sizeof(cell_t)) != 0) - nnotcelllbl++; - } - - fprintf(f, " = "); - if ((p[len-1] == '\0') && (nnotstring == 0) && (nnul < (len-nnul)) - && (nnotstringlbl == 0)) { - write_propval_string(f, prop->val); - } else if (((len % sizeof(cell_t)) == 0) && (nnotcelllbl == 0)) { - write_propval_cells(f, prop->val); - } else { - write_propval_bytes(f, prop->val); - } - - fprintf(f, ";\n"); -} - -static void write_tree_source_node(FILE *f, struct node *tree, int level) -{ - struct property *prop; - struct node *child; - - write_prefix(f, level); - if (tree->label) - fprintf(f, "%s: ", tree->label); - if (tree->name && (*tree->name)) - fprintf(f, "%s {\n", tree->name); - else - fprintf(f, "/ {\n"); - - for_each_property(tree, prop) { - write_prefix(f, level+1); - if (prop->label) - fprintf(f, "%s: ", prop->label); - fprintf(f, "%s", prop->name); - write_propval(f, prop); - } - for_each_child(tree, child) { - fprintf(f, "\n"); - write_tree_source_node(f, child, level+1); - } - write_prefix(f, level); - fprintf(f, "};\n"); -} - - -void dt_to_source(FILE *f, struct boot_info *bi) -{ - struct reserve_info *re; - - fprintf(f, "/dts-v1/;\n\n"); - - for (re = bi->reservelist; re; re = re->next) { - if (re->label) - fprintf(f, "%s: ", re->label); - fprintf(f, "/memreserve/\t0x%016llx 0x%016llx;\n", - (unsigned long long)re->re.address, - (unsigned long long)re->re.size); - } - - write_tree_source_node(f, bi->dt, 0); -} - diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/version_gen.h linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/version_gen.h --- linux-2.6.30-rc4/arch/powerpc/boot/dtc-src/version_gen.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/dtc-src/version_gen.h 1970-01-01 01:00:00.000000000 +0100 @@ -1 +0,0 @@ -#define DTC_VERSION "DTC 1.2.0" diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/libfdt/fdt.c linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/fdt.c --- linux-2.6.30-rc4/arch/powerpc/boot/libfdt/fdt.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/fdt.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,201 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -int fdt_check_header(const void *fdt) -{ - if (fdt_magic(fdt) == FDT_MAGIC) { - /* Complete tree */ - if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION) - return -FDT_ERR_BADVERSION; - if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION) - return -FDT_ERR_BADVERSION; - } else if (fdt_magic(fdt) == FDT_SW_MAGIC) { - /* Unfinished sequential-write blob */ - if (fdt_size_dt_struct(fdt) == 0) - return -FDT_ERR_BADSTATE; - } else { - return -FDT_ERR_BADMAGIC; - } - - return 0; -} - -const void *fdt_offset_ptr(const void *fdt, int offset, int len) -{ - const char *p; - - if (fdt_version(fdt) >= 0x11) - if (((offset + len) < offset) - || ((offset + len) > fdt_size_dt_struct(fdt))) - return NULL; - - p = _fdt_offset_ptr(fdt, offset); - - if (p + len < p) - return NULL; - return p; -} - -uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset) -{ - const uint32_t *tagp, *lenp; - uint32_t tag; - const char *p; - - if (offset % FDT_TAGSIZE) - return -1; - - tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE); - if (! tagp) - return FDT_END; /* premature end */ - tag = fdt32_to_cpu(*tagp); - offset += FDT_TAGSIZE; - - switch (tag) { - case FDT_BEGIN_NODE: - /* skip name */ - do { - p = fdt_offset_ptr(fdt, offset++, 1); - } while (p && (*p != '\0')); - if (! p) - return FDT_END; - break; - case FDT_PROP: - lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp)); - if (! lenp) - return FDT_END; - /* skip name offset, length and value */ - offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp); - break; - } - - if (nextoffset) - *nextoffset = FDT_TAGALIGN(offset); - - return tag; -} - -int _fdt_check_node_offset(const void *fdt, int offset) -{ - if ((offset < 0) || (offset % FDT_TAGSIZE) - || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE)) - return -FDT_ERR_BADOFFSET; - - return offset; -} - -int fdt_next_node(const void *fdt, int offset, int *depth) -{ - int nextoffset = 0; - uint32_t tag; - - if (offset >= 0) - if ((nextoffset = _fdt_check_node_offset(fdt, offset)) < 0) - return nextoffset; - - do { - offset = nextoffset; - tag = fdt_next_tag(fdt, offset, &nextoffset); - - switch (tag) { - case FDT_PROP: - case FDT_NOP: - break; - - case FDT_BEGIN_NODE: - if (depth) - (*depth)++; - break; - - case FDT_END_NODE: - if (depth) - (*depth)--; - break; - - case FDT_END: - return -FDT_ERR_NOTFOUND; - - default: - return -FDT_ERR_BADSTRUCTURE; - } - } while (tag != FDT_BEGIN_NODE); - - return offset; -} - -const char *_fdt_find_string(const char *strtab, int tabsize, const char *s) -{ - int len = strlen(s) + 1; - const char *last = strtab + tabsize - len; - const char *p; - - for (p = strtab; p <= last; p++) - if (memcmp(p, s, len) == 0) - return p; - return NULL; -} - -int fdt_move(const void *fdt, void *buf, int bufsize) -{ - FDT_CHECK_HEADER(fdt); - - if (fdt_totalsize(fdt) > bufsize) - return -FDT_ERR_NOSPACE; - - memmove(buf, fdt, fdt_totalsize(fdt)); - return 0; -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/libfdt/fdt.h linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/fdt.h --- linux-2.6.30-rc4/arch/powerpc/boot/libfdt/fdt.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/fdt.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,60 +0,0 @@ -#ifndef _FDT_H -#define _FDT_H - -#ifndef __ASSEMBLY__ - -struct fdt_header { - uint32_t magic; /* magic word FDT_MAGIC */ - uint32_t totalsize; /* total size of DT block */ - uint32_t off_dt_struct; /* offset to structure */ - uint32_t off_dt_strings; /* offset to strings */ - uint32_t off_mem_rsvmap; /* offset to memory reserve map */ - uint32_t version; /* format version */ - uint32_t last_comp_version; /* last compatible version */ - - /* version 2 fields below */ - uint32_t boot_cpuid_phys; /* Which physical CPU id we're - booting on */ - /* version 3 fields below */ - uint32_t size_dt_strings; /* size of the strings block */ - - /* version 17 fields below */ - uint32_t size_dt_struct; /* size of the structure block */ -}; - -struct fdt_reserve_entry { - uint64_t address; - uint64_t size; -}; - -struct fdt_node_header { - uint32_t tag; - char name[0]; -}; - -struct fdt_property { - uint32_t tag; - uint32_t len; - uint32_t nameoff; - char data[0]; -}; - -#endif /* !__ASSEMBLY */ - -#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */ -#define FDT_TAGSIZE sizeof(uint32_t) - -#define FDT_BEGIN_NODE 0x1 /* Start node: full name */ -#define FDT_END_NODE 0x2 /* End node */ -#define FDT_PROP 0x3 /* Property: name off, - size, content */ -#define FDT_NOP 0x4 /* nop */ -#define FDT_END 0x9 - -#define FDT_V1_SIZE (7*sizeof(uint32_t)) -#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(uint32_t)) -#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(uint32_t)) -#define FDT_V16_SIZE FDT_V3_SIZE -#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t)) - -#endif /* _FDT_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/libfdt/fdt_ro.c linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/fdt_ro.c --- linux-2.6.30-rc4/arch/powerpc/boot/libfdt/fdt_ro.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/fdt_ro.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,469 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -static int _fdt_nodename_eq(const void *fdt, int offset, - const char *s, int len) -{ - const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1); - - if (! p) - /* short match */ - return 0; - - if (memcmp(p, s, len) != 0) - return 0; - - if (p[len] == '\0') - return 1; - else if (!memchr(s, '@', len) && (p[len] == '@')) - return 1; - else - return 0; -} - -const char *fdt_string(const void *fdt, int stroffset) -{ - return (const char *)fdt + fdt_off_dt_strings(fdt) + stroffset; -} - -int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size) -{ - FDT_CHECK_HEADER(fdt); - *address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address); - *size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size); - return 0; -} - -int fdt_num_mem_rsv(const void *fdt) -{ - int i = 0; - - while (fdt64_to_cpu(_fdt_mem_rsv(fdt, i)->size) != 0) - i++; - return i; -} - -int fdt_subnode_offset_namelen(const void *fdt, int offset, - const char *name, int namelen) -{ - int depth; - - FDT_CHECK_HEADER(fdt); - - for (depth = 0, offset = fdt_next_node(fdt, offset, &depth); - (offset >= 0) && (depth > 0); - offset = fdt_next_node(fdt, offset, &depth)) { - if (depth < 0) - return -FDT_ERR_NOTFOUND; - else if ((depth == 1) - && _fdt_nodename_eq(fdt, offset, name, namelen)) - return offset; - } - - if (offset < 0) - return offset; /* error */ - else - return -FDT_ERR_NOTFOUND; -} - -int fdt_subnode_offset(const void *fdt, int parentoffset, - const char *name) -{ - return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name)); -} - -int fdt_path_offset(const void *fdt, const char *path) -{ - const char *end = path + strlen(path); - const char *p = path; - int offset = 0; - - FDT_CHECK_HEADER(fdt); - - if (*path != '/') - return -FDT_ERR_BADPATH; - - while (*p) { - const char *q; - - while (*p == '/') - p++; - if (! *p) - return offset; - q = strchr(p, '/'); - if (! q) - q = end; - - offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p); - if (offset < 0) - return offset; - - p = q; - } - - return offset; -} - -const char *fdt_get_name(const void *fdt, int nodeoffset, int *len) -{ - const struct fdt_node_header *nh = _fdt_offset_ptr(fdt, nodeoffset); - int err; - - if (((err = fdt_check_header(fdt)) != 0) - || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0)) - goto fail; - - if (len) - *len = strlen(nh->name); - - return nh->name; - - fail: - if (len) - *len = err; - return NULL; -} - -const struct fdt_property *fdt_get_property(const void *fdt, - int nodeoffset, - const char *name, int *lenp) -{ - uint32_t tag; - const struct fdt_property *prop; - int namestroff; - int offset, nextoffset; - int err; - - if (((err = fdt_check_header(fdt)) != 0) - || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0)) - goto fail; - - nextoffset = err; - do { - offset = nextoffset; - - tag = fdt_next_tag(fdt, offset, &nextoffset); - switch (tag) { - case FDT_END: - err = -FDT_ERR_TRUNCATED; - goto fail; - - case FDT_BEGIN_NODE: - case FDT_END_NODE: - case FDT_NOP: - break; - - case FDT_PROP: - err = -FDT_ERR_BADSTRUCTURE; - prop = fdt_offset_ptr(fdt, offset, sizeof(*prop)); - if (! prop) - goto fail; - namestroff = fdt32_to_cpu(prop->nameoff); - if (strcmp(fdt_string(fdt, namestroff), name) == 0) { - /* Found it! */ - int len = fdt32_to_cpu(prop->len); - prop = fdt_offset_ptr(fdt, offset, - sizeof(*prop)+len); - if (! prop) - goto fail; - - if (lenp) - *lenp = len; - - return prop; - } - break; - - default: - err = -FDT_ERR_BADSTRUCTURE; - goto fail; - } - } while ((tag != FDT_BEGIN_NODE) && (tag != FDT_END_NODE)); - - err = -FDT_ERR_NOTFOUND; - fail: - if (lenp) - *lenp = err; - return NULL; -} - -const void *fdt_getprop(const void *fdt, int nodeoffset, - const char *name, int *lenp) -{ - const struct fdt_property *prop; - - prop = fdt_get_property(fdt, nodeoffset, name, lenp); - if (! prop) - return NULL; - - return prop->data; -} - -uint32_t fdt_get_phandle(const void *fdt, int nodeoffset) -{ - const uint32_t *php; - int len; - - php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len); - if (!php || (len != sizeof(*php))) - return 0; - - return fdt32_to_cpu(*php); -} - -int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen) -{ - int pdepth = 0, p = 0; - int offset, depth, namelen; - const char *name; - - FDT_CHECK_HEADER(fdt); - - if (buflen < 2) - return -FDT_ERR_NOSPACE; - - for (offset = 0, depth = 0; - (offset >= 0) && (offset <= nodeoffset); - offset = fdt_next_node(fdt, offset, &depth)) { - if (pdepth < depth) - continue; /* overflowed buffer */ - - while (pdepth > depth) { - do { - p--; - } while (buf[p-1] != '/'); - pdepth--; - } - - name = fdt_get_name(fdt, offset, &namelen); - if (!name) - return namelen; - if ((p + namelen + 1) <= buflen) { - memcpy(buf + p, name, namelen); - p += namelen; - buf[p++] = '/'; - pdepth++; - } - - if (offset == nodeoffset) { - if (pdepth < (depth + 1)) - return -FDT_ERR_NOSPACE; - - if (p > 1) /* special case so that root path is "/", not "" */ - p--; - buf[p] = '\0'; - return p; - } - } - - if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) - return -FDT_ERR_BADOFFSET; - else if (offset == -FDT_ERR_BADOFFSET) - return -FDT_ERR_BADSTRUCTURE; - - return offset; /* error from fdt_next_node() */ -} - -int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, - int supernodedepth, int *nodedepth) -{ - int offset, depth; - int supernodeoffset = -FDT_ERR_INTERNAL; - - FDT_CHECK_HEADER(fdt); - - if (supernodedepth < 0) - return -FDT_ERR_NOTFOUND; - - for (offset = 0, depth = 0; - (offset >= 0) && (offset <= nodeoffset); - offset = fdt_next_node(fdt, offset, &depth)) { - if (depth == supernodedepth) - supernodeoffset = offset; - - if (offset == nodeoffset) { - if (nodedepth) - *nodedepth = depth; - - if (supernodedepth > depth) - return -FDT_ERR_NOTFOUND; - else - return supernodeoffset; - } - } - - if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) - return -FDT_ERR_BADOFFSET; - else if (offset == -FDT_ERR_BADOFFSET) - return -FDT_ERR_BADSTRUCTURE; - - return offset; /* error from fdt_next_node() */ -} - -int fdt_node_depth(const void *fdt, int nodeoffset) -{ - int nodedepth; - int err; - - err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth); - if (err) - return (err < 0) ? err : -FDT_ERR_INTERNAL; - return nodedepth; -} - -int fdt_parent_offset(const void *fdt, int nodeoffset) -{ - int nodedepth = fdt_node_depth(fdt, nodeoffset); - - if (nodedepth < 0) - return nodedepth; - return fdt_supernode_atdepth_offset(fdt, nodeoffset, - nodedepth - 1, NULL); -} - -int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, - const char *propname, - const void *propval, int proplen) -{ - int offset; - const void *val; - int len; - - FDT_CHECK_HEADER(fdt); - - /* FIXME: The algorithm here is pretty horrible: we scan each - * property of a node in fdt_getprop(), then if that didn't - * find what we want, we scan over them again making our way - * to the next node. Still it's the easiest to implement - * approach; performance can come later. */ - for (offset = fdt_next_node(fdt, startoffset, NULL); - offset >= 0; - offset = fdt_next_node(fdt, offset, NULL)) { - val = fdt_getprop(fdt, offset, propname, &len); - if (val && (len == proplen) - && (memcmp(val, propval, len) == 0)) - return offset; - } - - return offset; /* error from fdt_next_node() */ -} - -int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle) -{ - if ((phandle == 0) || (phandle == -1)) - return -FDT_ERR_BADPHANDLE; - phandle = cpu_to_fdt32(phandle); - return fdt_node_offset_by_prop_value(fdt, -1, "linux,phandle", - &phandle, sizeof(phandle)); -} - -int _stringlist_contains(const char *strlist, int listlen, const char *str) -{ - int len = strlen(str); - const char *p; - - while (listlen >= len) { - if (memcmp(str, strlist, len+1) == 0) - return 1; - p = memchr(strlist, '\0', listlen); - if (!p) - return 0; /* malformed strlist.. */ - listlen -= (p-strlist) + 1; - strlist = p + 1; - } - return 0; -} - -int fdt_node_check_compatible(const void *fdt, int nodeoffset, - const char *compatible) -{ - const void *prop; - int len; - - prop = fdt_getprop(fdt, nodeoffset, "compatible", &len); - if (!prop) - return len; - if (_stringlist_contains(prop, len, compatible)) - return 0; - else - return 1; -} - -int fdt_node_offset_by_compatible(const void *fdt, int startoffset, - const char *compatible) -{ - int offset, err; - - FDT_CHECK_HEADER(fdt); - - /* FIXME: The algorithm here is pretty horrible: we scan each - * property of a node in fdt_node_check_compatible(), then if - * that didn't find what we want, we scan over them again - * making our way to the next node. Still it's the easiest to - * implement approach; performance can come later. */ - for (offset = fdt_next_node(fdt, startoffset, NULL); - offset >= 0; - offset = fdt_next_node(fdt, offset, NULL)) { - err = fdt_node_check_compatible(fdt, offset, compatible); - if ((err < 0) && (err != -FDT_ERR_NOTFOUND)) - return err; - else if (err == 0) - return offset; - } - - return offset; /* error from fdt_next_node() */ -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/libfdt/fdt_rw.c linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/fdt_rw.c --- linux-2.6.30-rc4/arch/powerpc/boot/libfdt/fdt_rw.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/fdt_rw.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,463 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -static int _fdt_blocks_misordered(const void *fdt, - int mem_rsv_size, int struct_size) -{ - return (fdt_off_mem_rsvmap(fdt) < FDT_ALIGN(sizeof(struct fdt_header), 8)) - || (fdt_off_dt_struct(fdt) < - (fdt_off_mem_rsvmap(fdt) + mem_rsv_size)) - || (fdt_off_dt_strings(fdt) < - (fdt_off_dt_struct(fdt) + struct_size)) - || (fdt_totalsize(fdt) < - (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt))); -} - -static int _fdt_rw_check_header(void *fdt) -{ - FDT_CHECK_HEADER(fdt); - - if (fdt_version(fdt) < 17) - return -FDT_ERR_BADVERSION; - if (_fdt_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry), - fdt_size_dt_struct(fdt))) - return -FDT_ERR_BADLAYOUT; - if (fdt_version(fdt) > 17) - fdt_set_version(fdt, 17); - - return 0; -} - -#define FDT_RW_CHECK_HEADER(fdt) \ - { \ - int err; \ - if ((err = _fdt_rw_check_header(fdt)) != 0) \ - return err; \ - } - -static inline int _fdt_data_size(void *fdt) -{ - return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); -} - -static int _fdt_splice(void *fdt, void *splicepoint, int oldlen, int newlen) -{ - char *p = splicepoint; - char *end = (char *)fdt + _fdt_data_size(fdt); - - if (((p + oldlen) < p) || ((p + oldlen) > end)) - return -FDT_ERR_BADOFFSET; - if ((end - oldlen + newlen) > ((char *)fdt + fdt_totalsize(fdt))) - return -FDT_ERR_NOSPACE; - memmove(p + newlen, p + oldlen, end - p - oldlen); - return 0; -} - -static int _fdt_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p, - int oldn, int newn) -{ - int delta = (newn - oldn) * sizeof(*p); - int err; - err = _fdt_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p)); - if (err) - return err; - fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta); - fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); - return 0; -} - -static int _fdt_splice_struct(void *fdt, void *p, - int oldlen, int newlen) -{ - int delta = newlen - oldlen; - int err; - - if ((err = _fdt_splice(fdt, p, oldlen, newlen))) - return err; - - fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta); - fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); - return 0; -} - -static int _fdt_splice_string(void *fdt, int newlen) -{ - void *p = (char *)fdt - + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); - int err; - - if ((err = _fdt_splice(fdt, p, 0, newlen))) - return err; - - fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen); - return 0; -} - -static int _fdt_find_add_string(void *fdt, const char *s) -{ - char *strtab = (char *)fdt + fdt_off_dt_strings(fdt); - const char *p; - char *new; - int len = strlen(s) + 1; - int err; - - p = _fdt_find_string(strtab, fdt_size_dt_strings(fdt), s); - if (p) - /* found it */ - return (p - strtab); - - new = strtab + fdt_size_dt_strings(fdt); - err = _fdt_splice_string(fdt, len); - if (err) - return err; - - memcpy(new, s, len); - return (new - strtab); -} - -int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size) -{ - struct fdt_reserve_entry *re; - int err; - - FDT_RW_CHECK_HEADER(fdt); - - re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt)); - err = _fdt_splice_mem_rsv(fdt, re, 0, 1); - if (err) - return err; - - re->address = cpu_to_fdt64(address); - re->size = cpu_to_fdt64(size); - return 0; -} - -int fdt_del_mem_rsv(void *fdt, int n) -{ - struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n); - int err; - - FDT_RW_CHECK_HEADER(fdt); - - if (n >= fdt_num_mem_rsv(fdt)) - return -FDT_ERR_NOTFOUND; - - err = _fdt_splice_mem_rsv(fdt, re, 1, 0); - if (err) - return err; - return 0; -} - -static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name, - int len, struct fdt_property **prop) -{ - int oldlen; - int err; - - *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen); - if (! (*prop)) - return oldlen; - - if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen), - FDT_TAGALIGN(len)))) - return err; - - (*prop)->len = cpu_to_fdt32(len); - return 0; -} - -static int _fdt_add_property(void *fdt, int nodeoffset, const char *name, - int len, struct fdt_property **prop) -{ - int proplen; - int nextoffset; - int namestroff; - int err; - - if ((nextoffset = _fdt_check_node_offset(fdt, nodeoffset)) < 0) - return nextoffset; - - namestroff = _fdt_find_add_string(fdt, name); - if (namestroff < 0) - return namestroff; - - *prop = _fdt_offset_ptr_w(fdt, nextoffset); - proplen = sizeof(**prop) + FDT_TAGALIGN(len); - - err = _fdt_splice_struct(fdt, *prop, 0, proplen); - if (err) - return err; - - (*prop)->tag = cpu_to_fdt32(FDT_PROP); - (*prop)->nameoff = cpu_to_fdt32(namestroff); - (*prop)->len = cpu_to_fdt32(len); - return 0; -} - -int fdt_set_name(void *fdt, int nodeoffset, const char *name) -{ - char *namep; - int oldlen, newlen; - int err; - - FDT_RW_CHECK_HEADER(fdt); - - namep = (char *)(uintptr_t)fdt_get_name(fdt, nodeoffset, &oldlen); - if (!namep) - return oldlen; - - newlen = strlen(name); - - err = _fdt_splice_struct(fdt, namep, FDT_TAGALIGN(oldlen+1), - FDT_TAGALIGN(newlen+1)); - if (err) - return err; - - memcpy(namep, name, newlen+1); - return 0; -} - -int fdt_setprop(void *fdt, int nodeoffset, const char *name, - const void *val, int len) -{ - struct fdt_property *prop; - int err; - - FDT_RW_CHECK_HEADER(fdt); - - err = _fdt_resize_property(fdt, nodeoffset, name, len, &prop); - if (err == -FDT_ERR_NOTFOUND) - err = _fdt_add_property(fdt, nodeoffset, name, len, &prop); - if (err) - return err; - - memcpy(prop->data, val, len); - return 0; -} - -int fdt_delprop(void *fdt, int nodeoffset, const char *name) -{ - struct fdt_property *prop; - int len, proplen; - - FDT_RW_CHECK_HEADER(fdt); - - prop = fdt_get_property_w(fdt, nodeoffset, name, &len); - if (! prop) - return len; - - proplen = sizeof(*prop) + FDT_TAGALIGN(len); - return _fdt_splice_struct(fdt, prop, proplen, 0); -} - -int fdt_add_subnode_namelen(void *fdt, int parentoffset, - const char *name, int namelen) -{ - struct fdt_node_header *nh; - int offset, nextoffset; - int nodelen; - int err; - uint32_t tag; - uint32_t *endtag; - - FDT_RW_CHECK_HEADER(fdt); - - offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen); - if (offset >= 0) - return -FDT_ERR_EXISTS; - else if (offset != -FDT_ERR_NOTFOUND) - return offset; - - /* Try to place the new node after the parent's properties */ - fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */ - do { - offset = nextoffset; - tag = fdt_next_tag(fdt, offset, &nextoffset); - } while ((tag == FDT_PROP) || (tag == FDT_NOP)); - - nh = _fdt_offset_ptr_w(fdt, offset); - nodelen = sizeof(*nh) + FDT_TAGALIGN(namelen+1) + FDT_TAGSIZE; - - err = _fdt_splice_struct(fdt, nh, 0, nodelen); - if (err) - return err; - - nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); - memset(nh->name, 0, FDT_TAGALIGN(namelen+1)); - memcpy(nh->name, name, namelen); - endtag = (uint32_t *)((char *)nh + nodelen - FDT_TAGSIZE); - *endtag = cpu_to_fdt32(FDT_END_NODE); - - return offset; -} - -int fdt_add_subnode(void *fdt, int parentoffset, const char *name) -{ - return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name)); -} - -int fdt_del_node(void *fdt, int nodeoffset) -{ - int endoffset; - - FDT_RW_CHECK_HEADER(fdt); - - endoffset = _fdt_node_end_offset(fdt, nodeoffset); - if (endoffset < 0) - return endoffset; - - return _fdt_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset), - endoffset - nodeoffset, 0); -} - -static void _fdt_packblocks(const char *old, char *new, - int mem_rsv_size, int struct_size) -{ - int mem_rsv_off, struct_off, strings_off; - - mem_rsv_off = FDT_ALIGN(sizeof(struct fdt_header), 8); - struct_off = mem_rsv_off + mem_rsv_size; - strings_off = struct_off + struct_size; - - memmove(new + mem_rsv_off, old + fdt_off_mem_rsvmap(old), mem_rsv_size); - fdt_set_off_mem_rsvmap(new, mem_rsv_off); - - memmove(new + struct_off, old + fdt_off_dt_struct(old), struct_size); - fdt_set_off_dt_struct(new, struct_off); - fdt_set_size_dt_struct(new, struct_size); - - memmove(new + strings_off, old + fdt_off_dt_strings(old), - fdt_size_dt_strings(old)); - fdt_set_off_dt_strings(new, strings_off); - fdt_set_size_dt_strings(new, fdt_size_dt_strings(old)); -} - -int fdt_open_into(const void *fdt, void *buf, int bufsize) -{ - int err; - int mem_rsv_size, struct_size; - int newsize; - const char *fdtstart = fdt; - const char *fdtend = fdtstart + fdt_totalsize(fdt); - char *tmp; - - FDT_CHECK_HEADER(fdt); - - mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) - * sizeof(struct fdt_reserve_entry); - - if (fdt_version(fdt) >= 17) { - struct_size = fdt_size_dt_struct(fdt); - } else { - struct_size = 0; - while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END) - ; - } - - if (!_fdt_blocks_misordered(fdt, mem_rsv_size, struct_size)) { - /* no further work necessary */ - err = fdt_move(fdt, buf, bufsize); - if (err) - return err; - fdt_set_version(buf, 17); - fdt_set_size_dt_struct(buf, struct_size); - fdt_set_totalsize(buf, bufsize); - return 0; - } - - /* Need to reorder */ - newsize = FDT_ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size - + struct_size + fdt_size_dt_strings(fdt); - - if (bufsize < newsize) - return -FDT_ERR_NOSPACE; - - /* First attempt to build converted tree at beginning of buffer */ - tmp = buf; - /* But if that overlaps with the old tree... */ - if (((tmp + newsize) > fdtstart) && (tmp < fdtend)) { - /* Try right after the old tree instead */ - tmp = (char *)(uintptr_t)fdtend; - if ((tmp + newsize) > ((char *)buf + bufsize)) - return -FDT_ERR_NOSPACE; - } - - _fdt_packblocks(fdt, tmp, mem_rsv_size, struct_size); - memmove(buf, tmp, newsize); - - fdt_set_magic(buf, FDT_MAGIC); - fdt_set_totalsize(buf, bufsize); - fdt_set_version(buf, 17); - fdt_set_last_comp_version(buf, 16); - fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt)); - - return 0; -} - -int fdt_pack(void *fdt) -{ - int mem_rsv_size; - - FDT_RW_CHECK_HEADER(fdt); - - mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) - * sizeof(struct fdt_reserve_entry); - _fdt_packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt)); - fdt_set_totalsize(fdt, _fdt_data_size(fdt)); - - return 0; -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/libfdt/fdt_strerror.c linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/fdt_strerror.c --- linux-2.6.30-rc4/arch/powerpc/boot/libfdt/fdt_strerror.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/fdt_strerror.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,96 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -struct fdt_errtabent { - const char *str; -}; - -#define FDT_ERRTABENT(val) \ - [(val)] = { .str = #val, } - -static struct fdt_errtabent fdt_errtable[] = { - FDT_ERRTABENT(FDT_ERR_NOTFOUND), - FDT_ERRTABENT(FDT_ERR_EXISTS), - FDT_ERRTABENT(FDT_ERR_NOSPACE), - - FDT_ERRTABENT(FDT_ERR_BADOFFSET), - FDT_ERRTABENT(FDT_ERR_BADPATH), - FDT_ERRTABENT(FDT_ERR_BADSTATE), - - FDT_ERRTABENT(FDT_ERR_TRUNCATED), - FDT_ERRTABENT(FDT_ERR_BADMAGIC), - FDT_ERRTABENT(FDT_ERR_BADVERSION), - FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE), - FDT_ERRTABENT(FDT_ERR_BADLAYOUT), -}; -#define FDT_ERRTABSIZE (sizeof(fdt_errtable) / sizeof(fdt_errtable[0])) - -const char *fdt_strerror(int errval) -{ - if (errval > 0) - return ""; - else if (errval == 0) - return ""; - else if (errval > -FDT_ERRTABSIZE) { - const char *s = fdt_errtable[-errval].str; - - if (s) - return s; - } - - return ""; -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/libfdt/fdt_sw.c linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/fdt_sw.c --- linux-2.6.30-rc4/arch/powerpc/boot/libfdt/fdt_sw.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/fdt_sw.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,257 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -static int _fdt_sw_check_header(void *fdt) -{ - if (fdt_magic(fdt) != FDT_SW_MAGIC) - return -FDT_ERR_BADMAGIC; - /* FIXME: should check more details about the header state */ - return 0; -} - -#define FDT_SW_CHECK_HEADER(fdt) \ - { \ - int err; \ - if ((err = _fdt_sw_check_header(fdt)) != 0) \ - return err; \ - } - -static void *_fdt_grab_space(void *fdt, int len) -{ - int offset = fdt_size_dt_struct(fdt); - int spaceleft; - - spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt) - - fdt_size_dt_strings(fdt); - - if ((offset + len < offset) || (offset + len > spaceleft)) - return NULL; - - fdt_set_size_dt_struct(fdt, offset + len); - return fdt_offset_ptr_w(fdt, offset, len); -} - -int fdt_create(void *buf, int bufsize) -{ - void *fdt = buf; - - if (bufsize < sizeof(struct fdt_header)) - return -FDT_ERR_NOSPACE; - - memset(buf, 0, bufsize); - - fdt_set_magic(fdt, FDT_SW_MAGIC); - fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION); - fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION); - fdt_set_totalsize(fdt, bufsize); - - fdt_set_off_mem_rsvmap(fdt, FDT_ALIGN(sizeof(struct fdt_header), - sizeof(struct fdt_reserve_entry))); - fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt)); - fdt_set_off_dt_strings(fdt, bufsize); - - return 0; -} - -int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size) -{ - struct fdt_reserve_entry *re; - int offset; - - FDT_SW_CHECK_HEADER(fdt); - - if (fdt_size_dt_struct(fdt)) - return -FDT_ERR_BADSTATE; - - offset = fdt_off_dt_struct(fdt); - if ((offset + sizeof(*re)) > fdt_totalsize(fdt)) - return -FDT_ERR_NOSPACE; - - re = (struct fdt_reserve_entry *)((char *)fdt + offset); - re->address = cpu_to_fdt64(addr); - re->size = cpu_to_fdt64(size); - - fdt_set_off_dt_struct(fdt, offset + sizeof(*re)); - - return 0; -} - -int fdt_finish_reservemap(void *fdt) -{ - return fdt_add_reservemap_entry(fdt, 0, 0); -} - -int fdt_begin_node(void *fdt, const char *name) -{ - struct fdt_node_header *nh; - int namelen = strlen(name) + 1; - - FDT_SW_CHECK_HEADER(fdt); - - nh = _fdt_grab_space(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen)); - if (! nh) - return -FDT_ERR_NOSPACE; - - nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); - memcpy(nh->name, name, namelen); - return 0; -} - -int fdt_end_node(void *fdt) -{ - uint32_t *en; - - FDT_SW_CHECK_HEADER(fdt); - - en = _fdt_grab_space(fdt, FDT_TAGSIZE); - if (! en) - return -FDT_ERR_NOSPACE; - - *en = cpu_to_fdt32(FDT_END_NODE); - return 0; -} - -static int _fdt_find_add_string(void *fdt, const char *s) -{ - char *strtab = (char *)fdt + fdt_totalsize(fdt); - const char *p; - int strtabsize = fdt_size_dt_strings(fdt); - int len = strlen(s) + 1; - int struct_top, offset; - - p = _fdt_find_string(strtab - strtabsize, strtabsize, s); - if (p) - return p - strtab; - - /* Add it */ - offset = -strtabsize - len; - struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); - if (fdt_totalsize(fdt) + offset < struct_top) - return 0; /* no more room :( */ - - memcpy(strtab + offset, s, len); - fdt_set_size_dt_strings(fdt, strtabsize + len); - return offset; -} - -int fdt_property(void *fdt, const char *name, const void *val, int len) -{ - struct fdt_property *prop; - int nameoff; - - FDT_SW_CHECK_HEADER(fdt); - - nameoff = _fdt_find_add_string(fdt, name); - if (nameoff == 0) - return -FDT_ERR_NOSPACE; - - prop = _fdt_grab_space(fdt, sizeof(*prop) + FDT_TAGALIGN(len)); - if (! prop) - return -FDT_ERR_NOSPACE; - - prop->tag = cpu_to_fdt32(FDT_PROP); - prop->nameoff = cpu_to_fdt32(nameoff); - prop->len = cpu_to_fdt32(len); - memcpy(prop->data, val, len); - return 0; -} - -int fdt_finish(void *fdt) -{ - char *p = (char *)fdt; - uint32_t *end; - int oldstroffset, newstroffset; - uint32_t tag; - int offset, nextoffset; - - FDT_SW_CHECK_HEADER(fdt); - - /* Add terminator */ - end = _fdt_grab_space(fdt, sizeof(*end)); - if (! end) - return -FDT_ERR_NOSPACE; - *end = cpu_to_fdt32(FDT_END); - - /* Relocate the string table */ - oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt); - newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); - memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt)); - fdt_set_off_dt_strings(fdt, newstroffset); - - /* Walk the structure, correcting string offsets */ - offset = 0; - while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) { - if (tag == FDT_PROP) { - struct fdt_property *prop = - fdt_offset_ptr_w(fdt, offset, sizeof(*prop)); - int nameoff; - - if (! prop) - return -FDT_ERR_BADSTRUCTURE; - - nameoff = fdt32_to_cpu(prop->nameoff); - nameoff += fdt_size_dt_strings(fdt); - prop->nameoff = cpu_to_fdt32(nameoff); - } - offset = nextoffset; - } - - /* Finally, adjust the header */ - fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt)); - fdt_set_magic(fdt, FDT_MAGIC); - return 0; -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/libfdt/fdt_wip.c linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/fdt_wip.c --- linux-2.6.30-rc4/arch/powerpc/boot/libfdt/fdt_wip.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/fdt_wip.c 1970-01-01 01:00:00.000000000 +0100 @@ -1,145 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, - const void *val, int len) -{ - void *propval; - int proplen; - - propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen); - if (! propval) - return proplen; - - if (proplen != len) - return -FDT_ERR_NOSPACE; - - memcpy(propval, val, len); - return 0; -} - -static void _fdt_nop_region(void *start, int len) -{ - uint32_t *p; - - for (p = start; (char *)p < ((char *)start + len); p++) - *p = cpu_to_fdt32(FDT_NOP); -} - -int fdt_nop_property(void *fdt, int nodeoffset, const char *name) -{ - struct fdt_property *prop; - int len; - - prop = fdt_get_property_w(fdt, nodeoffset, name, &len); - if (! prop) - return len; - - _fdt_nop_region(prop, len + sizeof(*prop)); - - return 0; -} - -int _fdt_node_end_offset(void *fdt, int nodeoffset) -{ - int level = 0; - uint32_t tag; - int offset, nextoffset; - - tag = fdt_next_tag(fdt, nodeoffset, &nextoffset); - if (tag != FDT_BEGIN_NODE) - return -FDT_ERR_BADOFFSET; - do { - offset = nextoffset; - tag = fdt_next_tag(fdt, offset, &nextoffset); - - switch (tag) { - case FDT_END: - return offset; - - case FDT_BEGIN_NODE: - level++; - break; - - case FDT_END_NODE: - level--; - break; - - case FDT_PROP: - case FDT_NOP: - break; - - default: - return -FDT_ERR_BADSTRUCTURE; - } - } while (level >= 0); - - return nextoffset; -} - -int fdt_nop_node(void *fdt, int nodeoffset) -{ - int endoffset; - - endoffset = _fdt_node_end_offset(fdt, nodeoffset); - if (endoffset < 0) - return endoffset; - - _fdt_nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0), - endoffset - nodeoffset); - return 0; -} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/libfdt/libfdt.h linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/libfdt.h --- linux-2.6.30-rc4/arch/powerpc/boot/libfdt/libfdt.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/libfdt.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,1076 +0,0 @@ -#ifndef _LIBFDT_H -#define _LIBFDT_H -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include - -#define FDT_FIRST_SUPPORTED_VERSION 0x10 -#define FDT_LAST_SUPPORTED_VERSION 0x11 - -/* Error codes: informative error codes */ -#define FDT_ERR_NOTFOUND 1 - /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ -#define FDT_ERR_EXISTS 2 - /* FDT_ERR_EXISTS: Attemped to create a node or property which - * already exists */ -#define FDT_ERR_NOSPACE 3 - /* FDT_ERR_NOSPACE: Operation needed to expand the device - * tree, but its buffer did not have sufficient space to - * contain the expanded tree. Use fdt_open_into() to move the - * device tree to a buffer with more space. */ - -/* Error codes: codes for bad parameters */ -#define FDT_ERR_BADOFFSET 4 - /* FDT_ERR_BADOFFSET: Function was passed a structure block - * offset which is out-of-bounds, or which points to an - * unsuitable part of the structure for the operation. */ -#define FDT_ERR_BADPATH 5 - /* FDT_ERR_BADPATH: Function was passed a badly formatted path - * (e.g. missing a leading / for a function which requires an - * absolute path) */ -#define FDT_ERR_BADPHANDLE 6 - /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle - * value. phandle values of 0 and -1 are not permitted. */ -#define FDT_ERR_BADSTATE 7 - /* FDT_ERR_BADSTATE: Function was passed an incomplete device - * tree created by the sequential-write functions, which is - * not sufficiently complete for the requested operation. */ - -/* Error codes: codes for bad device tree blobs */ -#define FDT_ERR_TRUNCATED 8 - /* FDT_ERR_TRUNCATED: Structure block of the given device tree - * ends without an FDT_END tag. */ -#define FDT_ERR_BADMAGIC 9 - /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a - * device tree at all - it is missing the flattened device - * tree magic number. */ -#define FDT_ERR_BADVERSION 10 - /* FDT_ERR_BADVERSION: Given device tree has a version which - * can't be handled by the requested operation. For - * read-write functions, this may mean that fdt_open_into() is - * required to convert the tree to the expected version. */ -#define FDT_ERR_BADSTRUCTURE 11 - /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt - * structure block or other serious error (e.g. misnested - * nodes, or subnodes preceding properties). */ -#define FDT_ERR_BADLAYOUT 12 - /* FDT_ERR_BADLAYOUT: For read-write functions, the given - * device tree has it's sub-blocks in an order that the - * function can't handle (memory reserve map, then structure, - * then strings). Use fdt_open_into() to reorganize the tree - * into a form suitable for the read-write operations. */ - -/* "Can't happen" error indicating a bug in libfdt */ -#define FDT_ERR_INTERNAL 13 - /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. - * Should never be returned, if it is, it indicates a bug in - * libfdt itself. */ - -#define FDT_ERR_MAX 13 - -/**********************************************************************/ -/* Low-level functions (you probably don't need these) */ -/**********************************************************************/ - -const void *fdt_offset_ptr(const void *fdt, int offset, int checklen); -static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) -{ - return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen); -} - -uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); - -/**********************************************************************/ -/* Traversal functions */ -/**********************************************************************/ - -int fdt_next_node(const void *fdt, int offset, int *depth); - -/**********************************************************************/ -/* General functions */ -/**********************************************************************/ - -#define fdt_get_header(fdt, field) \ - (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field)) -#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) -#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) -#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) -#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) -#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) -#define fdt_version(fdt) (fdt_get_header(fdt, version)) -#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) -#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) -#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) -#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) - -#define __fdt_set_hdr(name) \ - static inline void fdt_set_##name(void *fdt, uint32_t val) \ - { \ - struct fdt_header *fdth = fdt; \ - fdth->name = cpu_to_fdt32(val); \ - } -__fdt_set_hdr(magic); -__fdt_set_hdr(totalsize); -__fdt_set_hdr(off_dt_struct); -__fdt_set_hdr(off_dt_strings); -__fdt_set_hdr(off_mem_rsvmap); -__fdt_set_hdr(version); -__fdt_set_hdr(last_comp_version); -__fdt_set_hdr(boot_cpuid_phys); -__fdt_set_hdr(size_dt_strings); -__fdt_set_hdr(size_dt_struct); -#undef __fdt_set_hdr - -/** - * fdt_check_header - sanity check a device tree or possible device tree - * @fdt: pointer to data which might be a flattened device tree - * - * fdt_check_header() checks that the given buffer contains what - * appears to be a flattened device tree with sane information in its - * header. - * - * returns: - * 0, if the buffer appears to contain a valid device tree - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings, as above - */ -int fdt_check_header(const void *fdt); - -/** - * fdt_move - move a device tree around in memory - * @fdt: pointer to the device tree to move - * @buf: pointer to memory where the device is to be moved - * @bufsize: size of the memory space at buf - * - * fdt_move() relocates, if possible, the device tree blob located at - * fdt to the buffer at buf of size bufsize. The buffer may overlap - * with the existing device tree blob at fdt. Therefore, - * fdt_move(fdt, fdt, fdt_totalsize(fdt)) - * should always succeed. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -int fdt_move(const void *fdt, void *buf, int bufsize); - -/**********************************************************************/ -/* Read-only functions */ -/**********************************************************************/ - -/** - * fdt_string - retrieve a string from the strings block of a device tree - * @fdt: pointer to the device tree blob - * @stroffset: offset of the string within the strings block (native endian) - * - * fdt_string() retrieves a pointer to a single string from the - * strings block of the device tree blob at fdt. - * - * returns: - * a pointer to the string, on success - * NULL, if stroffset is out of bounds - */ -const char *fdt_string(const void *fdt, int stroffset); - -/** - * fdt_num_mem_rsv - retrieve the number of memory reserve map entries - * @fdt: pointer to the device tree blob - * - * Returns the number of entries in the device tree blob's memory - * reservation map. This does not include the terminating 0,0 entry - * or any other (0,0) entries reserved for expansion. - * - * returns: - * the number of entries - */ -int fdt_num_mem_rsv(const void *fdt); - -/** - * fdt_get_mem_rsv - retrieve one memory reserve map entry - * @fdt: pointer to the device tree blob - * @address, @size: pointers to 64-bit variables - * - * On success, *address and *size will contain the address and size of - * the n-th reserve map entry from the device tree blob, in - * native-endian format. - * - * returns: - * 0, on success - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); - -/** - * fdt_subnode_offset_namelen - find a subnode based on substring - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * @namelen: number of characters of name to consider - * - * Identical to fdt_subnode_offset(), but only examine the first - * namelen characters of name for matching the subnode name. This is - * useful for finding subnodes based on a portion of a larger string, - * such as a full path. - */ -int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, - const char *name, int namelen); -/** - * fdt_subnode_offset - find a subnode of a given node - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * - * fdt_subnode_offset() finds a subnode of the node at structure block - * offset parentoffset with the given name. name may include a unit - * address, in which case fdt_subnode_offset() will find the subnode - * with that unit address, or the unit address may be omitted, in - * which case fdt_subnode_offset() will find an arbitrary subnode - * whose name excluding unit address matches the given name. - * - * returns: - * structure block offset of the requested subnode (>=0), on success - * -FDT_ERR_NOTFOUND, if the requested subnode does not exist - * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); - -/** - * fdt_path_offset - find a tree node by its full path - * @fdt: pointer to the device tree blob - * @path: full path of the node to locate - * - * fdt_path_offset() finds a node of a given path in the device tree. - * Each path component may omit the unit address portion, but the - * results of this are undefined if any such path component is - * ambiguous (that is if there are multiple nodes at the relevant - * level matching the given component, differentiated only by unit - * address). - * - * returns: - * structure block offset of the node with the requested path (>=0), on success - * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid - * -FDT_ERR_NOTFOUND, if the requested node does not exist - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_path_offset(const void *fdt, const char *path); - -/** - * fdt_get_name - retrieve the name of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of the starting node - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_get_name() retrieves the name (including unit address) of the - * device tree node at structure block offset nodeoffset. If lenp is - * non-NULL, the length of this name is also returned, in the integer - * pointed to by lenp. - * - * returns: - * pointer to the node's name, on success - * If lenp is non-NULL, *lenp contains the length of that name (>=0) - * NULL, on error - * if lenp is non-NULL *lenp contains an error code (<0): - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); - -/** - * fdt_get_property - find a given property in a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to find - * @name: name of the property to find - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_get_property() retrieves a pointer to the fdt_property - * structure within the device tree blob corresponding to the property - * named 'name' of the node at offset nodeoffset. If lenp is - * non-NULL, the length of the property value is also returned, in the - * integer pointed to by lenp. - * - * returns: - * pointer to the structure representing the property - * if lenp is non-NULL, *lenp contains the length of the property - * value (>=0) - * NULL, on error - * if lenp is non-NULL, *lenp contains an error code (<0): - * -FDT_ERR_NOTFOUND, node does not have named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, - const char *name, int *lenp); -static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, - const char *name, - int *lenp) -{ - return (struct fdt_property *)(uintptr_t) - fdt_get_property(fdt, nodeoffset, name, lenp); -} - -/** - * fdt_getprop - retrieve the value of a given property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to find - * @name: name of the property to find - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_getprop() retrieves a pointer to the value of the property - * named 'name' of the node at offset nodeoffset (this will be a - * pointer to within the device blob itself, not a copy of the value). - * If lenp is non-NULL, the length of the property value is also - * returned, in the integer pointed to by lenp. - * - * returns: - * pointer to the property's value - * if lenp is non-NULL, *lenp contains the length of the property - * value (>=0) - * NULL, on error - * if lenp is non-NULL, *lenp contains an error code (<0): - * -FDT_ERR_NOTFOUND, node does not have named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -const void *fdt_getprop(const void *fdt, int nodeoffset, - const char *name, int *lenp); -static inline void *fdt_getprop_w(void *fdt, int nodeoffset, - const char *name, int *lenp) -{ - return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp); -} - -/** - * fdt_get_phandle - retrieve the phandle of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of the node - * - * fdt_get_phandle() retrieves the phandle of the device tree node at - * structure block offset nodeoffset. - * - * returns: - * the phandle of the node at nodeoffset, on success (!= 0, != -1) - * 0, if the node has no phandle, or another error occurs - */ -uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); - -/** - * fdt_get_path - determine the full path of a node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose path to find - * @buf: character buffer to contain the returned path (will be overwritten) - * @buflen: size of the character buffer at buf - * - * fdt_get_path() computes the full path of the node at offset - * nodeoffset, and records that path in the buffer at buf. - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset. - * - * returns: - * 0, on success - * buf contains the absolute path of the node at - * nodeoffset, as a NUL-terminated string. - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) - * characters and will not fit in the given buffer. - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); - -/** - * fdt_supernode_atdepth_offset - find a specific ancestor of a node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose parent to find - * @supernodedepth: depth of the ancestor to find - * @nodedepth: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_supernode_atdepth_offset() finds an ancestor of the given node - * at a specific depth from the root (where the root itself has depth - * 0, its immediate subnodes depth 1 and so forth). So - * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); - * will always return 0, the offset of the root node. If the node at - * nodeoffset has depth D, then: - * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); - * will return nodeoffset itself. - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset. - * - * returns: - - * structure block offset of the node at node offset's ancestor - * of depth supernodedepth (>=0), on success - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag -* -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, - int supernodedepth, int *nodedepth); - -/** - * fdt_node_depth - find the depth of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose parent to find - * - * fdt_node_depth() finds the depth of a given node. The root node - * has depth 0, its immediate subnodes depth 1 and so forth. - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset. - * - * returns: - * depth of the node at nodeoffset (>=0), on success - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_depth(const void *fdt, int nodeoffset); - -/** - * fdt_parent_offset - find the parent of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose parent to find - * - * fdt_parent_offset() locates the parent node of a given node (that - * is, it finds the offset of the node which contains the node at - * nodeoffset as a subnode). - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset, *twice*. - * - * returns: - * structure block offset of the parent of the node at nodeoffset - * (>=0), on success - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_parent_offset(const void *fdt, int nodeoffset); - -/** - * fdt_node_offset_by_prop_value - find nodes with a given property value - * @fdt: pointer to the device tree blob - * @startoffset: only find nodes after this offset - * @propname: property name to check - * @propval: property value to search for - * @proplen: length of the value in propval - * - * fdt_node_offset_by_prop_value() returns the offset of the first - * node after startoffset, which has a property named propname whose - * value is of length proplen and has value equal to propval; or if - * startoffset is -1, the very first such node in the tree. - * - * To iterate through all nodes matching the criterion, the following - * idiom can be used: - * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, - * propval, proplen); - * while (offset != -FDT_ERR_NOTFOUND) { - * // other code here - * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, - * propval, proplen); - * } - * - * Note the -1 in the first call to the function, if 0 is used here - * instead, the function will never locate the root node, even if it - * matches the criterion. - * - * returns: - * structure block offset of the located node (>= 0, >startoffset), - * on success - * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the - * tree after startoffset - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, - const char *propname, - const void *propval, int proplen); - -/** - * fdt_node_offset_by_phandle - find the node with a given phandle - * @fdt: pointer to the device tree blob - * @phandle: phandle value - * - * fdt_node_offset_by_phandle() returns the offset of the node - * which has the given phandle value. If there is more than one node - * in the tree with the given phandle (an invalid tree), results are - * undefined. - * - * returns: - * structure block offset of the located node (>= 0), on success - * -FDT_ERR_NOTFOUND, no node with that phandle exists - * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); - -/** - * fdt_node_check_compatible: check a node's compatible property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of a tree node - * @compatible: string to match against - * - * - * fdt_node_check_compatible() returns 0 if the given node contains a - * 'compatible' property with the given string as one of its elements, - * it returns non-zero otherwise, or on error. - * - * returns: - * 0, if the node has a 'compatible' property listing the given string - * 1, if the node has a 'compatible' property, but it does not list - * the given string - * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property - * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_check_compatible(const void *fdt, int nodeoffset, - const char *compatible); - -/** - * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value - * @fdt: pointer to the device tree blob - * @startoffset: only find nodes after this offset - * @compatible: 'compatible' string to match against - * - * fdt_node_offset_by_compatible() returns the offset of the first - * node after startoffset, which has a 'compatible' property which - * lists the given compatible string; or if startoffset is -1, the - * very first such node in the tree. - * - * To iterate through all nodes matching the criterion, the following - * idiom can be used: - * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); - * while (offset != -FDT_ERR_NOTFOUND) { - * // other code here - * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); - * } - * - * Note the -1 in the first call to the function, if 0 is used here - * instead, the function will never locate the root node, even if it - * matches the criterion. - * - * returns: - * structure block offset of the located node (>= 0, >startoffset), - * on success - * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the - * tree after startoffset - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_offset_by_compatible(const void *fdt, int startoffset, - const char *compatible); - -/**********************************************************************/ -/* Write-in-place functions */ -/**********************************************************************/ - -/** - * fdt_setprop_inplace - change a property's value, but not its size - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: pointer to data to replace the property value with - * @len: length of the property value - * - * fdt_setprop_inplace() replaces the value of a given property with - * the data in val, of length len. This function cannot change the - * size of a property, and so will only work if len is equal to the - * current length of the property. - * - * This function will alter only the bytes in the blob which contain - * the given property value, and will not alter or move any other part - * of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, if len is not equal to the property's current length - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, - const void *val, int len); - -/** - * fdt_setprop_inplace_cell - change the value of a single-cell property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: cell (32-bit integer) value to replace the property with - * - * fdt_setprop_inplace_cell() replaces the value of a given property - * with the 32-bit integer cell value in val, converting val to - * big-endian if necessary. This function cannot change the size of a - * property, and so will only work if the property already exists and - * has length 4. - * - * This function will alter only the bytes in the blob which contain - * the given property value, and will not alter or move any other part - * of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, - const char *name, uint32_t val) -{ - val = cpu_to_fdt32(val); - return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val)); -} - -/** - * fdt_nop_property - replace a property with nop tags - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to nop - * @name: name of the property to nop - * - * fdt_nop_property() will replace a given property's representation - * in the blob with FDT_NOP tags, effectively removing it from the - * tree. - * - * This function will alter only the bytes in the blob which contain - * the property, and will not alter or move any other part of the - * tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_nop_property(void *fdt, int nodeoffset, const char *name); - -/** - * fdt_nop_node - replace a node (subtree) with nop tags - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node to nop - * - * fdt_nop_node() will replace a given node's representation in the - * blob, including all its subnodes, if any, with FDT_NOP tags, - * effectively removing it from the tree. - * - * This function will alter only the bytes in the blob which contain - * the node and its properties and subnodes, and will not alter or - * move any other part of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_nop_node(void *fdt, int nodeoffset); - -/**********************************************************************/ -/* Sequential write functions */ -/**********************************************************************/ - -int fdt_create(void *buf, int bufsize); -int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); -int fdt_finish_reservemap(void *fdt); -int fdt_begin_node(void *fdt, const char *name); -int fdt_property(void *fdt, const char *name, const void *val, int len); -static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) -{ - val = cpu_to_fdt32(val); - return fdt_property(fdt, name, &val, sizeof(val)); -} -#define fdt_property_string(fdt, name, str) \ - fdt_property(fdt, name, str, strlen(str)+1) -int fdt_end_node(void *fdt); -int fdt_finish(void *fdt); - -/**********************************************************************/ -/* Read-write functions */ -/**********************************************************************/ - -int fdt_open_into(const void *fdt, void *buf, int bufsize); -int fdt_pack(void *fdt); - -/** - * fdt_add_mem_rsv - add one memory reserve map entry - * @fdt: pointer to the device tree blob - * @address, @size: 64-bit values (native endian) - * - * Adds a reserve map entry to the given blob reserving a region at - * address address of length size. - * - * This function will insert data into the reserve map and will - * therefore change the indexes of some entries in the table. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new reservation entry - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); - -/** - * fdt_del_mem_rsv - remove a memory reserve map entry - * @fdt: pointer to the device tree blob - * @n: entry to remove - * - * fdt_del_mem_rsv() removes the n-th memory reserve map entry from - * the blob. - * - * This function will delete data from the reservation table and will - * therefore change the indexes of some entries in the table. - * - * returns: - * 0, on success - * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there - * are less than n+1 reserve map entries) - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_del_mem_rsv(void *fdt, int n); - -/** - * fdt_set_name - change the name of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of a node - * @name: name to give the node - * - * fdt_set_name() replaces the name (including unit address, if any) - * of the given node with the given string. NOTE: this function can't - * efficiently check if the new name is unique amongst the given - * node's siblings; results are undefined if this function is invoked - * with a name equal to one of the given node's siblings. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob - * to contain the new name - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -int fdt_set_name(void *fdt, int nodeoffset, const char *name); - -/** - * fdt_setprop - create or change a property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: pointer to data to set the property value to - * @len: length of the property value - * - * fdt_setprop() sets the value of the named property in the given - * node to the given value and length, creating the property if it - * does not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_setprop(void *fdt, int nodeoffset, const char *name, - const void *val, int len); - -/** - * fdt_setprop_cell - set a property to a single cell value - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: 32-bit integer value for the property (native endian) - * - * fdt_setprop_cell() sets the value of the named property in the - * given node to the given cell value (converting to big-endian if - * necessary), or creates a new property with that value if it does - * not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, - uint32_t val) -{ - val = cpu_to_fdt32(val); - return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val)); -} - -/** - * fdt_setprop_string - set a property to a string value - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @str: string value for the property - * - * fdt_setprop_string() sets the value of the named property in the - * given node to the given string value (using the length of the - * string to determine the new length of the property), or creates a - * new property with that value if it does not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -#define fdt_setprop_string(fdt, nodeoffset, name, str) \ - fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) - -/** - * fdt_delprop - delete a property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to nop - * @name: name of the property to nop - * - * fdt_del_property() will delete the given property. - * - * This function will delete data from the blob, and will therefore - * change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_delprop(void *fdt, int nodeoffset, const char *name); - -/** - * fdt_add_subnode_namelen - creates a new node based on substring - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * @namelen: number of characters of name to consider - * - * Identical to fdt_add_subnode(), but use only the first namelen - * characters of name as the name of the new node. This is useful for - * creating subnodes based on a portion of a larger string, such as a - * full path. - */ -int fdt_add_subnode_namelen(void *fdt, int parentoffset, - const char *name, int namelen); - -/** - * fdt_add_subnode - creates a new node - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * - * fdt_add_subnode() creates a new node as a subnode of the node at - * structure block offset parentoffset, with the given name (which - * should include the unit address, if any). - * - * This function will insert data into the blob, and will therefore - * change the offsets of some existing nodes. - - * returns: - * structure block offset of the created nodeequested subnode (>=0), on success - * -FDT_ERR_NOTFOUND, if the requested subnode does not exist - * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag - * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of - * the given name - * -FDT_ERR_NOSPACE, if there is insufficient free space in the - * blob to contain the new node - * -FDT_ERR_NOSPACE - * -FDT_ERR_BADLAYOUT - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_add_subnode(void *fdt, int parentoffset, const char *name); - -/** - * fdt_del_node - delete a node (subtree) - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node to nop - * - * fdt_del_node() will remove the given node, including all its - * subnodes if any, from the blob. - * - * This function will delete data from the blob, and will therefore - * change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_del_node(void *fdt, int nodeoffset); - -/**********************************************************************/ -/* Debugging / informational functions */ -/**********************************************************************/ - -const char *fdt_strerror(int errval); - -#endif /* _LIBFDT_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/libfdt/libfdt_internal.h linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/libfdt_internal.h --- linux-2.6.30-rc4/arch/powerpc/boot/libfdt/libfdt_internal.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/libfdt_internal.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,95 +0,0 @@ -#ifndef _LIBFDT_INTERNAL_H -#define _LIBFDT_INTERNAL_H -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include - -#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) -#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE)) - -#define FDT_CHECK_HEADER(fdt) \ - { \ - int err; \ - if ((err = fdt_check_header(fdt)) != 0) \ - return err; \ - } - -uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset); -int _fdt_check_node_offset(const void *fdt, int offset); -const char *_fdt_find_string(const char *strtab, int tabsize, const char *s); -int _fdt_node_end_offset(void *fdt, int nodeoffset); - -static inline const void *_fdt_offset_ptr(const void *fdt, int offset) -{ - return (const char *)fdt + fdt_off_dt_struct(fdt) + offset; -} - -static inline void *_fdt_offset_ptr_w(void *fdt, int offset) -{ - return (void *)(uintptr_t)_fdt_offset_ptr(fdt, offset); -} - -static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n) -{ - const struct fdt_reserve_entry *rsv_table = - (const struct fdt_reserve_entry *) - ((const char *)fdt + fdt_off_mem_rsvmap(fdt)); - - return rsv_table + n; -} -static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n) -{ - return (void *)(uintptr_t)_fdt_mem_rsv(fdt, n); -} - -#define FDT_SW_MAGIC (~FDT_MAGIC) - -#endif /* _LIBFDT_INTERNAL_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/libfdt/Makefile.libfdt linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/Makefile.libfdt --- linux-2.6.30-rc4/arch/powerpc/boot/libfdt/Makefile.libfdt 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/libfdt/Makefile.libfdt 1970-01-01 01:00:00.000000000 +0100 @@ -1,8 +0,0 @@ -# Makefile.libfdt -# -# This is not a complete Makefile of itself. Instead, it is designed to -# be easily embeddable into other systems of Makefiles. -# -LIBFDT_INCLUDES = fdt.h libfdt.h -LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c -LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/Makefile linux-2.6.30-rc4-git/arch/powerpc/boot/Makefile --- linux-2.6.30-rc4/arch/powerpc/boot/Makefile 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/Makefile 2009-05-13 09:46:19.000000000 +0200 @@ -33,7 +33,7 @@ ifeq ($(call cc-option-yn, -fstack-prote BOOTCFLAGS += -fno-stack-protector endif -BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt +BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) DTS_FLAGS ?= -p 1024 @@ -53,9 +53,14 @@ zliblinuxheader := zlib.h zconf.h zutil. $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \ $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) -src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +libfdtheader := fdt.h libfdt.h libfdt_internal.h + +$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \ + $(addprefix $(obj)/,$(libfdtheader)) + src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ - $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \ + $(libfdt) libfdt-wrapper.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \ 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \ @@ -96,6 +101,12 @@ $(addprefix $(obj)/,$(zlibheader)): $(ob $(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/% $(call cmd,copy_zliblinuxheader) +quiet_cmd_copy_libfdt = COPY $@ + cmd_copy_libfdt = cp $< $@ + +$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% + $(call cmd,copy_libfdt) + $(obj)/empty.c: @touch $@ @@ -103,6 +114,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds @cp $< $@ clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \ + $(libfdt) $(libfdtheader) \ empty.c zImage.coff.lds zImage.ps3.lds zImage.lds quiet_cmd_bootcc = BOOTCC $@ @@ -114,6 +126,8 @@ quiet_cmd_bootas = BOOTAS $@ quiet_cmd_bootar = BOOTAR $@ cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@ +$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE + $(call if_changed_dep,bootcc) $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE $(Q)mkdir -p $(dir $@) $(call if_changed_dep,bootcc) @@ -124,7 +138,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src- $(obj)/wrapper.a: $(obj-wlib) FORCE $(call if_changed,bootar) -hostprogs-y := addnote addRamDisk hack-coff mktree dtc +hostprogs-y := addnote addRamDisk hack-coff mktree targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ @@ -133,47 +147,10 @@ extra-y := $(obj)/wrapper.a $(obj-plat) dtstree := $(srctree)/$(src)/dts wrapper :=$(srctree)/$(src)/wrapper -wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \ +wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ $(wrapper) FORCE ############# -# Bits for building dtc -# DTC_GENPARSER := 1 # Uncomment to rebuild flex/bison output - -dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o -dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o -dtc-objs := $(addprefix dtc-src/, $(dtc-objs)) - -# prerequisites on generated files needs to be explicit -$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h -$(obj)/dtc-src/dtc-lexer.lex.o: $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h - -HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/ - -targets += dtc-src/dtc-parser.tab.c -targets += dtc-src/dtc-lexer.lex.c - -clean-files += dtc-src/dtc-parser.tab.h - -ifdef DTC_GENPARSER -BISON = bison -FLEX = flex - -quiet_cmd_bison = BISON $@ - cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped -quiet_cmd_flex = FLEX $@ - cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped - -$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE - $(call if_changed,bison) - -$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c - -$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE - $(call if_changed,flex) -endif - -############# # Bits for building various flavours of zImage ifneq ($(CROSS32_COMPILE),) @@ -347,8 +324,10 @@ $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb) # Rule to build device tree blobs -$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc - $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts +DTC = $(objtree)/scripts/dtc/dtc + +$(obj)/%.dtb: $(dtstree)/%.dts + $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts # If there isn't a platform selected then just strip the vmlinux. ifeq (,$(image-y)) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/boot/simpleboot.c linux-2.6.30-rc4-git/arch/powerpc/boot/simpleboot.c --- linux-2.6.30-rc4/arch/powerpc/boot/simpleboot.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/boot/simpleboot.c 2009-05-13 09:46:19.000000000 +0200 @@ -19,7 +19,7 @@ #include "types.h" #include "io.h" #include "stdio.h" -#include "libfdt/libfdt.h" +#include BSS_STACK(4*1024); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/include/asm/of_platform.h linux-2.6.30-rc4-git/arch/powerpc/include/asm/of_platform.h --- linux-2.6.30-rc4/arch/powerpc/include/asm/of_platform.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/include/asm/of_platform.h 2009-05-13 09:46:19.000000000 +0200 @@ -11,16 +11,6 @@ * */ -/* Platform drivers register/unregister */ -static inline int of_register_platform_driver(struct of_platform_driver *drv) -{ - return of_register_driver(drv, &of_platform_bus_type); -} -static inline void of_unregister_platform_driver(struct of_platform_driver *drv) -{ - of_unregister_driver(drv); -} - /* Platform devices and busses creation */ extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/powerpc/Kconfig linux-2.6.30-rc4-git/arch/powerpc/Kconfig --- linux-2.6.30-rc4/arch/powerpc/Kconfig 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/powerpc/Kconfig 2009-05-13 09:46:19.000000000 +0200 @@ -181,6 +181,10 @@ config SYS_SUPPORTS_APM_EMULATION default y if PMAC_APM_EMU bool +config DTC + bool + default y + config DEFAULT_UIMAGE bool help diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/x86/include/asm/mce.h linux-2.6.30-rc4-git/arch/x86/include/asm/mce.h --- linux-2.6.30-rc4/arch/x86/include/asm/mce.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/x86/include/asm/mce.h 2009-05-13 09:46:19.000000000 +0200 @@ -137,6 +137,7 @@ DECLARE_PER_CPU(mce_banks_t, mce_poll_ba enum mcp_flags { MCP_TIMESTAMP = (1 << 0), /* log time stamp */ MCP_UC = (1 << 1), /* log uncorrected errors */ + MCP_DONTLOG = (1 << 2), /* only clear, don't log */ }; extern void machine_check_poll(enum mcp_flags flags, mce_banks_t *b); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/arch/x86/kernel/cpu/mcheck/mce_64.c linux-2.6.30-rc4-git/arch/x86/kernel/cpu/mcheck/mce_64.c --- linux-2.6.30-rc4/arch/x86/kernel/cpu/mcheck/mce_64.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/arch/x86/kernel/cpu/mcheck/mce_64.c 2009-05-13 09:46:19.000000000 +0200 @@ -239,9 +239,10 @@ void machine_check_poll(enum mcp_flags f * Don't get the IP here because it's unlikely to * have anything to do with the actual error location. */ - - mce_log(&m); - add_taint(TAINT_MACHINE_CHECK); + if (!(flags & MCP_DONTLOG)) { + mce_log(&m); + add_taint(TAINT_MACHINE_CHECK); + } /* * Clear state for this bank. @@ -452,13 +453,14 @@ void mce_log_therm_throt_event(__u64 sta */ static int check_interval = 5 * 60; /* 5 minutes */ -static int next_interval; /* in jiffies */ +static DEFINE_PER_CPU(int, next_interval); /* in jiffies */ static void mcheck_timer(unsigned long); static DEFINE_PER_CPU(struct timer_list, mce_timer); static void mcheck_timer(unsigned long data) { struct timer_list *t = &per_cpu(mce_timer, data); + int *n; WARN_ON(smp_processor_id() != data); @@ -470,14 +472,14 @@ static void mcheck_timer(unsigned long d * Alert userspace if needed. If we logged an MCE, reduce the * polling interval, otherwise increase the polling interval. */ + n = &__get_cpu_var(next_interval); if (mce_notify_user()) { - next_interval = max(next_interval/2, HZ/100); + *n = max(*n/2, HZ/100); } else { - next_interval = min(next_interval * 2, - (int)round_jiffies_relative(check_interval*HZ)); + *n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ)); } - t->expires = jiffies + next_interval; + t->expires = jiffies + *n; add_timer(t); } @@ -584,7 +586,7 @@ static void mce_init(void *dummy) * Log the machine checks left over from the previous reset. */ bitmap_fill(all_banks, MAX_NR_BANKS); - machine_check_poll(MCP_UC, &all_banks); + machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks); set_in_cr4(X86_CR4_MCE); @@ -632,14 +634,13 @@ static void mce_cpu_features(struct cpui static void mce_init_timer(void) { struct timer_list *t = &__get_cpu_var(mce_timer); + int *n = &__get_cpu_var(next_interval); - /* data race harmless because everyone sets to the same value */ - if (!next_interval) - next_interval = check_interval * HZ; - if (!next_interval) + *n = check_interval * HZ; + if (!*n) return; setup_timer(t, mcheck_timer, smp_processor_id()); - t->expires = round_jiffies(jiffies + next_interval); + t->expires = round_jiffies(jiffies + *n); add_timer(t); } @@ -907,7 +908,6 @@ static void mce_cpu_restart(void *data) /* Reinit MCEs after user configuration changes */ static void mce_restart(void) { - next_interval = check_interval * HZ; on_each_cpu(mce_cpu_restart, NULL, 1); } @@ -1110,7 +1110,8 @@ static int __cpuinit mce_cpu_callback(st break; case CPU_DOWN_FAILED: case CPU_DOWN_FAILED_FROZEN: - t->expires = round_jiffies(jiffies + next_interval); + t->expires = round_jiffies(jiffies + + __get_cpu_var(next_interval)); add_timer_on(t, cpu); smp_call_function_single(cpu, mce_reenable_cpu, &action, 1); break; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/Documentation/DocBook/Makefile linux-2.6.30-rc4-git/Documentation/DocBook/Makefile --- linux-2.6.30-rc4/Documentation/DocBook/Makefile 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/Documentation/DocBook/Makefile 2009-05-13 09:46:19.000000000 +0200 @@ -143,7 +143,8 @@ quiet_cmd_db2pdf = PDF $@ $(call cmd,db2pdf) -main_idx = Documentation/DocBook/index.html +index = index.html +main_idx = Documentation/DocBook/$(index) build_main_index = rm -rf $(main_idx) && \ echo '

Linux Kernel HTML Documentation

' >> $(main_idx) && \ echo '

Kernel Version: $(KERNELVERSION)

' >> $(main_idx) && \ @@ -232,7 +233,7 @@ clean-files := $(DOCBOOKS) \ $(patsubst %.xml, %.pdf, $(DOCBOOKS)) \ $(patsubst %.xml, %.html, $(DOCBOOKS)) \ $(patsubst %.xml, %.9, $(DOCBOOKS)) \ - $(C-procfs-example) + $(C-procfs-example) $(index) clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/Documentation/filesystems/Locking linux-2.6.30-rc4-git/Documentation/filesystems/Locking --- linux-2.6.30-rc4/Documentation/filesystems/Locking 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/Documentation/filesystems/Locking 2009-05-13 09:46:19.000000000 +0200 @@ -512,16 +512,24 @@ locking rules: BKL mmap_sem PageLocked(page) open: no yes close: no yes -fault: no yes -page_mkwrite: no yes no +fault: no yes can return with page locked +page_mkwrite: no yes can return with page locked access: no yes - ->page_mkwrite() is called when a previously read-only page is -about to become writeable. The file system is responsible for -protecting against truncate races. Once appropriate action has been -taking to lock out truncate, the page range should be verified to be -within i_size. The page mapping should also be checked that it is not -NULL. + ->fault() is called when a previously not present pte is about +to be faulted in. The filesystem must find and return the page associated +with the passed in "pgoff" in the vm_fault structure. If it is possible that +the page may be truncated and/or invalidated, then the filesystem must lock +the page, then ensure it is not already truncated (the page lock will block +subsequent truncate), and then return with VM_FAULT_LOCKED, and the page +locked. The VM will unlock the page. + + ->page_mkwrite() is called when a previously read-only pte is +about to become writeable. The filesystem again must ensure that there are +no truncate/invalidate races, and then return with the page locked. If +the page has been truncated, the filesystem should not look up a new page +like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which +will cause the VM to retry the fault. ->access() is called when get_user_pages() fails in acces_process_vm(), typically used to debug a process through diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/Documentation/input/bcm5974.txt linux-2.6.30-rc4-git/Documentation/input/bcm5974.txt --- linux-2.6.30-rc4/Documentation/input/bcm5974.txt 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/Documentation/input/bcm5974.txt 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,65 @@ +BCM5974 Driver (bcm5974) +------------------------ + Copyright (C) 2008-2009 Henrik Rydberg + +The USB initialization and package decoding was made by Scott Shawcroft as +part of the touchd user-space driver project: + Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com) + +The BCM5974 driver is based on the appletouch driver: + Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) + Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net) + Copyright (C) 2005 Stelian Pop (stelian@popies.net) + Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de) + Copyright (C) 2005 Peter Osterlund (petero2@telia.com) + Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch) + Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch) + +This driver adds support for the multi-touch trackpad on the new Apple +Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on +those computers, and integrates well with the synaptics driver of the Xorg +system. + +Known to work on Macbook Air, Macbook Pro Penryn and the new unibody +Macbook 5 and Macbook Pro 5. + +Usage +----- + +The driver loads automatically for the supported usb device ids, and +becomes available both as an event device (/dev/input/event*) and as a +mouse via the mousedev driver (/dev/input/mice). + +USB Race +-------- + +The Apple multi-touch trackpads report both mouse and keyboard events via +different interfaces of the same usb device. This creates a race condition +with the HID driver, which, if not told otherwise, will find the standard +HID mouse and keyboard, and claim the whole device. To remedy, the usb +product id must be listed in the mouse_ignore list of the hid driver. + +Debug output +------------ + +To ease the development for new hardware version, verbose packet output can +be switched on with the debug kernel module parameter. The range [1-9] +yields different levels of verbosity. Example (as root): + +echo -n 9 > /sys/module/bcm5974/parameters/debug + +tail -f /var/log/debug + +echo -n 0 > /sys/module/bcm5974/parameters/debug + +Trivia +------ + +The driver was developed at the ubuntu forums in June 2008 [1], and now has +a more permanent home at bitmath.org [2]. + +Links +----- + +[1] http://ubuntuforums.org/showthread.php?t=840040 +[2] http://http://bitmath.org/code/ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/Documentation/input/multi-touch-protocol.txt linux-2.6.30-rc4-git/Documentation/input/multi-touch-protocol.txt --- linux-2.6.30-rc4/Documentation/input/multi-touch-protocol.txt 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/Documentation/input/multi-touch-protocol.txt 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,140 @@ +Multi-touch (MT) Protocol +------------------------- + Copyright (C) 2009 Henrik Rydberg + + +Introduction +------------ + +In order to utilize the full power of the new multi-touch devices, a way to +report detailed finger data to user space is needed. This document +describes the multi-touch (MT) protocol which allows kernel drivers to +report details for an arbitrary number of fingers. + + +Usage +----- + +Anonymous finger details are sent sequentially as separate packets of ABS +events. Only the ABS_MT events are recognized as part of a finger +packet. The end of a packet is marked by calling the input_mt_sync() +function, which generates a SYN_MT_REPORT event. The end of multi-touch +transfer is marked by calling the usual input_sync() function. + +A set of ABS_MT events with the desired properties is defined. The events +are divided into categories, to allow for partial implementation. The +minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and +ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the +device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size +of the approaching finger. Anisotropy and direction may be specified with +ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with +more granular information may specify general shapes as blobs, i.e., as a +sequence of rectangular shapes grouped together by an +ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify +whether the touching tool is a finger or a pen or something else. + + +Event Semantics +--------------- + +The word "contact" is used to describe a tool which is in direct contact +with the surface. A finger, a pen or a rubber all classify as contacts. + +ABS_MT_TOUCH_MAJOR + +The length of the major axis of the contact. The length should be given in +surface units. If the surface has an X times Y resolution, the largest +possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal. + +ABS_MT_TOUCH_MINOR + +The length, in surface units, of the minor axis of the contact. If the +contact is circular, this event can be omitted. + +ABS_MT_WIDTH_MAJOR + +The length, in surface units, of the major axis of the approaching +tool. This should be understood as the size of the tool itself. The +orientation of the contact and the approaching tool are assumed to be the +same. + +ABS_MT_WIDTH_MINOR + +The length, in surface units, of the minor axis of the approaching +tool. Omit if circular. + +The above four values can be used to derive additional information about +the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates +the notion of pressure. The fingers of the hand and the palm all have +different characteristic widths [1]. + +ABS_MT_ORIENTATION + +The orientation of the ellipse. The value should describe half a revolution +clockwise around the touch center. The scale of the value is arbitrary, but +zero should be returned for an ellipse aligned along the Y axis of the +surface. As an example, an index finger placed straight onto the axis could +return zero orientation, something negative when twisted to the left, and +something positive when twisted to the right. This value can be omitted if +the touching object is circular, or if the information is not available in +the kernel driver. + +ABS_MT_POSITION_X + +The surface X coordinate of the center of the touching ellipse. + +ABS_MT_POSITION_Y + +The surface Y coordinate of the center of the touching ellipse. + +ABS_MT_TOOL_TYPE + +The type of approaching tool. A lot of kernel drivers cannot distinguish +between different tool types, such as a finger or a pen. In such cases, the +event should be omitted. The protocol currently supports MT_TOOL_FINGER and +MT_TOOL_PEN [2]. + +ABS_MT_BLOB_ID + +The BLOB_ID groups several packets together into one arbitrarily shaped +contact. This is a low-level anonymous grouping, and should not be confused +with the high-level contactID, explained below. Most kernel drivers will +not have this capability, and can safely omit the event. + + +Finger Tracking +--------------- + +The kernel driver should generate an arbitrary enumeration of the set of +anonymous contacts currently on the surface. The order in which the packets +appear in the event stream is not important. + +The process of finger tracking, i.e., to assign a unique contactID to each +initiated contact on the surface, is left to user space; preferably the +multi-touch X driver [3]. In that driver, the contactID stays the same and +unique until the contact vanishes (when the finger leaves the surface). The +problem of assigning a set of anonymous fingers to a set of identified +fingers is a euclidian bipartite matching problem at each event update, and +relies on a sufficiently rapid update rate. + +Notes +----- + +In order to stay compatible with existing applications, the data +reported in a finger packet must not be recognized as single-touch +events. In addition, all finger data must bypass input filtering, +since subsequent events of the same type refer to different fingers. + +The first kernel driver to utilize the MT protocol is the bcm5974 driver, +where examples can be found. + +[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the +difference between the contact position and the approaching tool position +could be used to derive tilt. +[2] The list can of course be extended. +[3] The multi-touch X driver is currently in the prototyping stage. At the +time of writing (April 2009), the MT protocol is not yet merged, and the +prototype implements finger matching, basic mouse support and two-finger +scrolling. The project aims at improving the quality of current multi-touch +functionality available in the synaptics X driver, and in addition +implement more advanced gestures. diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/Documentation/kernel-doc-nano-HOWTO.txt linux-2.6.30-rc4-git/Documentation/kernel-doc-nano-HOWTO.txt --- linux-2.6.30-rc4/Documentation/kernel-doc-nano-HOWTO.txt 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/Documentation/kernel-doc-nano-HOWTO.txt 2009-05-13 09:46:19.000000000 +0200 @@ -269,7 +269,10 @@ Use the argument mechanism to document m Inside a struct description, you can use the "private:" and "public:" comment tags. Structure fields that are inside a "private:" area -are not listed in the generated output documentation. +are not listed in the generated output documentation. The "private:" +and "public:" tags must begin immediately following a "/*" comment +marker. They may optionally include comments between the ":" and the +ending "*/" marker. Example: @@ -283,7 +286,7 @@ Example: struct my_struct { int a; int b; -/* private: */ +/* private: internal use only */ int c; }; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/Documentation/sysctl/vm.txt linux-2.6.30-rc4-git/Documentation/sysctl/vm.txt --- linux-2.6.30-rc4/Documentation/sysctl/vm.txt 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/Documentation/sysctl/vm.txt 2009-05-13 09:46:19.000000000 +0200 @@ -90,6 +90,10 @@ will itself start writeback. If dirty_bytes is written, dirty_ratio becomes a function of its value (dirty_bytes / the amount of dirtyable system memory). +Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any +value lower than this limit will be ignored and the old configuration will be +retained. + ============================================================== dirty_expire_centisecs diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/acpi/acpica/rscalc.c linux-2.6.30-rc4-git/drivers/acpi/acpica/rscalc.c --- linux-2.6.30-rc4/drivers/acpi/acpica/rscalc.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/acpi/acpica/rscalc.c 2009-05-13 09:46:19.000000000 +0200 @@ -543,6 +543,13 @@ acpi_rs_get_pci_routing_table_length(uni package_element = *top_object_list; + /* We must have a valid Package object */ + + if (!package_element || + (package_element->common.type != ACPI_TYPE_PACKAGE)) { + return_ACPI_STATUS (AE_AML_OPERAND_TYPE); + } + /* * The sub_object_list will now point to an array of the * four IRQ elements: Address, Pin, Source and source_index diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/char/hw_random/Kconfig linux-2.6.30-rc4-git/drivers/char/hw_random/Kconfig --- linux-2.6.30-rc4/drivers/char/hw_random/Kconfig 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/char/hw_random/Kconfig 2009-05-13 09:46:19.000000000 +0200 @@ -148,3 +148,15 @@ config HW_RANDOM_VIRTIO To compile this driver as a module, choose M here: the module will be called virtio-rng. If unsure, say N. + +config HW_RANDOM_MXC_RNGA + tristate "Freescale i.MX RNGA Random Number Generator" + depends on HW_RANDOM && ARCH_HAS_RNGA + ---help--- + This driver provides kernel-side support for the Random Number + Generator hardware found on Freescale i.MX processors. + + To compile this driver as a module, choose M here: the + module will be called mxc-rnga. + + If unsure, say Y. diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/char/hw_random/Makefile linux-2.6.30-rc4-git/drivers/char/hw_random/Makefile --- linux-2.6.30-rc4/drivers/char/hw_random/Makefile 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/char/hw_random/Makefile 2009-05-13 09:46:19.000000000 +0200 @@ -15,3 +15,4 @@ obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o +obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/char/hw_random/mxc-rnga.c linux-2.6.30-rc4-git/drivers/char/hw_random/mxc-rnga.c --- linux-2.6.30-rc4/drivers/char/hw_random/mxc-rnga.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/drivers/char/hw_random/mxc-rnga.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,247 @@ +/* + * RNG driver for Freescale RNGA + * + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Author: Alan Carvalho de Assis + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + * + * This driver is based on other RNG drivers. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* RNGA Registers */ +#define RNGA_CONTROL 0x00 +#define RNGA_STATUS 0x04 +#define RNGA_ENTROPY 0x08 +#define RNGA_OUTPUT_FIFO 0x0c +#define RNGA_MODE 0x10 +#define RNGA_VERIFICATION_CONTROL 0x14 +#define RNGA_OSC_CONTROL_COUNTER 0x18 +#define RNGA_OSC1_COUNTER 0x1c +#define RNGA_OSC2_COUNTER 0x20 +#define RNGA_OSC_COUNTER_STATUS 0x24 + +/* RNGA Registers Range */ +#define RNG_ADDR_RANGE 0x28 + +/* RNGA Control Register */ +#define RNGA_CONTROL_SLEEP 0x00000010 +#define RNGA_CONTROL_CLEAR_INT 0x00000008 +#define RNGA_CONTROL_MASK_INTS 0x00000004 +#define RNGA_CONTROL_HIGH_ASSURANCE 0x00000002 +#define RNGA_CONTROL_GO 0x00000001 + +#define RNGA_STATUS_LEVEL_MASK 0x0000ff00 + +/* RNGA Status Register */ +#define RNGA_STATUS_OSC_DEAD 0x80000000 +#define RNGA_STATUS_SLEEP 0x00000010 +#define RNGA_STATUS_ERROR_INT 0x00000008 +#define RNGA_STATUS_FIFO_UNDERFLOW 0x00000004 +#define RNGA_STATUS_LAST_READ_STATUS 0x00000002 +#define RNGA_STATUS_SECURITY_VIOLATION 0x00000001 + +static struct platform_device *rng_dev; + +static int mxc_rnga_data_present(struct hwrng *rng) +{ + int level; + void __iomem *rng_base = (void __iomem *)rng->priv; + + /* how many random numbers is in FIFO? [0-16] */ + level = ((__raw_readl(rng_base + RNGA_STATUS) & + RNGA_STATUS_LEVEL_MASK) >> 8); + + return level > 0 ? 1 : 0; +} + +static int mxc_rnga_data_read(struct hwrng *rng, u32 * data) +{ + int err; + u32 ctrl; + void __iomem *rng_base = (void __iomem *)rng->priv; + + /* retrieve a random number from FIFO */ + *data = __raw_readl(rng_base + RNGA_OUTPUT_FIFO); + + /* some error while reading this random number? */ + err = __raw_readl(rng_base + RNGA_STATUS) & RNGA_STATUS_ERROR_INT; + + /* if error: clear error interrupt, but doesn't return random number */ + if (err) { + dev_dbg(&rng_dev->dev, "Error while reading random number!\n"); + ctrl = __raw_readl(rng_base + RNGA_CONTROL); + __raw_writel(ctrl | RNGA_CONTROL_CLEAR_INT, + rng_base + RNGA_CONTROL); + return 0; + } else + return 4; +} + +static int mxc_rnga_init(struct hwrng *rng) +{ + u32 ctrl, osc; + void __iomem *rng_base = (void __iomem *)rng->priv; + + /* wake up */ + ctrl = __raw_readl(rng_base + RNGA_CONTROL); + __raw_writel(ctrl & ~RNGA_CONTROL_SLEEP, rng_base + RNGA_CONTROL); + + /* verify if oscillator is working */ + osc = __raw_readl(rng_base + RNGA_STATUS); + if (osc & RNGA_STATUS_OSC_DEAD) { + dev_err(&rng_dev->dev, "RNGA Oscillator is dead!\n"); + return -ENODEV; + } + + /* go running */ + ctrl = __raw_readl(rng_base + RNGA_CONTROL); + __raw_writel(ctrl | RNGA_CONTROL_GO, rng_base + RNGA_CONTROL); + + return 0; +} + +static void mxc_rnga_cleanup(struct hwrng *rng) +{ + u32 ctrl; + void __iomem *rng_base = (void __iomem *)rng->priv; + + ctrl = __raw_readl(rng_base + RNGA_CONTROL); + + /* stop rnga */ + __raw_writel(ctrl & ~RNGA_CONTROL_GO, rng_base + RNGA_CONTROL); +} + +static struct hwrng mxc_rnga = { + .name = "mxc-rnga", + .init = mxc_rnga_init, + .cleanup = mxc_rnga_cleanup, + .data_present = mxc_rnga_data_present, + .data_read = mxc_rnga_data_read +}; + +static int __init mxc_rnga_probe(struct platform_device *pdev) +{ + int err = -ENODEV; + struct clk *clk; + struct resource *res, *mem; + void __iomem *rng_base = NULL; + + if (rng_dev) + return -EBUSY; + + clk = clk_get(&pdev->dev, "rng"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Could not get rng_clk!\n"); + err = PTR_ERR(clk); + goto out; + } + + clk_enable(clk); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + err = -ENOENT; + goto err_region; + } + + mem = request_mem_region(res->start, resource_size(res), pdev->name); + if (mem == NULL) { + err = -EBUSY; + goto err_region; + } + + rng_base = ioremap(res->start, resource_size(res)); + if (!rng_base) { + err = -ENOMEM; + goto err_ioremap; + } + + mxc_rnga.priv = (unsigned long)rng_base; + + err = hwrng_register(&mxc_rnga); + if (err) { + dev_err(&pdev->dev, "MXC RNGA registering failed (%d)\n", err); + goto err_register; + } + + rng_dev = pdev; + + dev_info(&pdev->dev, "MXC RNGA Registered.\n"); + + return 0; + +err_register: + iounmap(rng_base); + rng_base = NULL; + +err_ioremap: + release_mem_region(res->start, resource_size(res)); + +err_region: + clk_disable(clk); + clk_put(clk); + +out: + return err; +} + +static int __exit mxc_rnga_remove(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + void __iomem *rng_base = (void __iomem *)mxc_rnga.priv; + struct clk *clk = clk_get(&pdev->dev, "rng"); + + hwrng_unregister(&mxc_rnga); + + iounmap(rng_base); + + release_mem_region(res->start, resource_size(res)); + + clk_disable(clk); + clk_put(clk); + + return 0; +} + +static struct platform_driver mxc_rnga_driver = { + .driver = { + .name = "mxc_rnga", + .owner = THIS_MODULE, + }, + .remove = __exit_p(mxc_rnga_remove), +}; + +static int __init mod_init(void) +{ + return platform_driver_probe(&mxc_rnga_driver, mxc_rnga_probe); +} + +static void __exit mod_exit(void) +{ + platform_driver_unregister(&mxc_rnga_driver); +} + +module_init(mod_init); +module_exit(mod_exit); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("H/W RNGA driver for i.MX"); +MODULE_LICENSE("GPL"); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/firmware/iscsi_ibft.c linux-2.6.30-rc4-git/drivers/firmware/iscsi_ibft.c --- linux-2.6.30-rc4/drivers/firmware/iscsi_ibft.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/firmware/iscsi_ibft.c 2009-05-13 09:46:19.000000000 +0200 @@ -754,11 +754,11 @@ static int __init ibft_check_nic_for(str rc = 1; break; case ibft_eth_ip_addr: - if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp))) + if (memcmp(nic->ip_addr, nulls, sizeof(nic->ip_addr))) rc = 1; break; case ibft_eth_subnet_mask: - if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp))) + if (nic->subnet_mask_prefix) rc = 1; break; case ibft_eth_origin: diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/hid/hid-apple.c linux-2.6.30-rc4-git/drivers/hid/hid-apple.c --- linux-2.6.30-rc4/drivers/hid/hid-apple.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/hid/hid-apple.c 2009-05-13 09:46:19.000000000 +0200 @@ -151,7 +151,7 @@ static int hidinput_apple_event(struct h if (fnmode) { int do_translate; - trans = apple_find_translation((hid->product < 0x220 || + trans = apple_find_translation((hid->product < 0x21d || hid->product >= 0x300) ? powerbook_fn_keys : apple_fn_keys, usage->code); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/hid/hid-core.c linux-2.6.30-rc4-git/drivers/hid/hid-core.c --- linux-2.6.30-rc4/drivers/hid/hid-core.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/hid/hid-core.c 2009-05-13 09:46:19.000000000 +0200 @@ -1293,6 +1293,7 @@ static const struct hid_device_id hid_bl { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) }, @@ -1824,6 +1825,9 @@ int hid_check_keys_pressed(struct hid_de struct hid_input *hidinput; int i; + if (!(hid->claimed & HID_CLAIMED_INPUT)) + return 0; + list_for_each_entry(hidinput, &hid->inputs, list) { for (i = 0; i < BITS_TO_LONGS(KEY_MAX); i++) if (hidinput->input->key[i]) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/hid/hid-ids.h linux-2.6.30-rc4-git/drivers/hid/hid-ids.h --- linux-2.6.30-rc4/drivers/hid/hid-ids.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/hid/hid-ids.h 2009-05-13 09:46:19.000000000 +0200 @@ -292,6 +292,7 @@ #define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO 0xc286 #define USB_DEVICE_ID_LOGITECH_WHEEL 0xc294 #define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL 0xc295 +#define USB_DEVICE_ID_LOGITECH_G25_WHEEL 0xc299 #define USB_DEVICE_ID_LOGITECH_ELITE_KBD 0xc30a #define USB_DEVICE_ID_S510_RECEIVER 0xc50c #define USB_DEVICE_ID_S510_RECEIVER_2 0xc517 diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/hid/hid-lg.c linux-2.6.30-rc4-git/drivers/hid/hid-lg.c --- linux-2.6.30-rc4/drivers/hid/hid-lg.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/hid/hid-lg.c 2009-05-13 09:46:19.000000000 +0200 @@ -297,6 +297,8 @@ static const struct hid_device_id lg_dev .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2), .driver_data = LG_FF }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL), + .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2), .driver_data = LG_FF2 }, { } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/hid/hidraw.c linux-2.6.30-rc4-git/drivers/hid/hidraw.c --- linux-2.6.30-rc4/drivers/hid/hidraw.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/hid/hidraw.c 2009-05-13 09:46:19.000000000 +0200 @@ -285,8 +285,10 @@ static long hidraw_ioctl(struct file *fi if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) { int len; - if (!hid->name) - return 0; + if (!hid->name) { + ret = 0; + break; + } len = strlen(hid->name) + 1; if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); @@ -297,8 +299,10 @@ static long hidraw_ioctl(struct file *fi if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) { int len; - if (!hid->phys) - return 0; + if (!hid->phys) { + ret = 0; + break; + } len = strlen(hid->phys) + 1; if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/hid/usbhid/hid-core.c linux-2.6.30-rc4-git/drivers/hid/usbhid/hid-core.c --- linux-2.6.30-rc4/drivers/hid/usbhid/hid-core.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/hid/usbhid/hid-core.c 2009-05-13 09:46:19.000000000 +0200 @@ -662,8 +662,8 @@ void usbhid_close(struct hid_device *hid spin_lock_irq(&usbhid->lock); if (!--hid->open) { spin_unlock_irq(&usbhid->lock); + hid_cancel_delayed_stuff(usbhid); usb_kill_urb(usbhid->urbin); - flush_scheduled_work(); usbhid->intf->needs_remote_wakeup = 0; } else { spin_unlock_irq(&usbhid->lock); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/ide/ide-cd.c linux-2.6.30-rc4-git/drivers/ide/ide-cd.c --- linux-2.6.30-rc4/drivers/ide/ide-cd.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/ide/ide-cd.c 2009-05-13 09:46:19.000000000 +0200 @@ -312,7 +312,6 @@ static int cdrom_decode_status(ide_drive ide_hwif_t *hwif = drive->hwif; struct request *rq = hwif->rq; int err, sense_key, do_end_request = 0; - u8 quiet = rq->cmd_flags & REQ_QUIET; /* get the IDE error register */ err = ide_read_error(drive); @@ -347,7 +346,7 @@ static int cdrom_decode_status(ide_drive } else { cdrom_saw_media_change(drive); - if (blk_fs_request(rq) && !quiet) + if (blk_fs_request(rq) && !blk_rq_quiet(rq)) printk(KERN_ERR PFX "%s: tray open\n", drive->name); } @@ -382,7 +381,7 @@ static int cdrom_decode_status(ide_drive * No point in retrying after an illegal request or data * protect error. */ - if (!quiet) + if (!blk_rq_quiet(rq)) ide_dump_status(drive, "command error", stat); do_end_request = 1; break; @@ -391,14 +390,14 @@ static int cdrom_decode_status(ide_drive * No point in re-trying a zillion times on a bad sector. * If we got here the error is not correctable. */ - if (!quiet) + if (!blk_rq_quiet(rq)) ide_dump_status(drive, "media error " "(bad sector)", stat); do_end_request = 1; break; case BLANK_CHECK: /* disk appears blank? */ - if (!quiet) + if (!blk_rq_quiet(rq)) ide_dump_status(drive, "media error (blank)", stat); do_end_request = 1; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/infiniband/ulp/iser/iscsi_iser.c linux-2.6.30-rc4-git/drivers/infiniband/ulp/iser/iscsi_iser.c --- linux-2.6.30-rc4/drivers/infiniband/ulp/iser/iscsi_iser.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/infiniband/ulp/iser/iscsi_iser.c 2009-05-13 09:46:19.000000000 +0200 @@ -599,6 +599,7 @@ static struct scsi_host_template iscsi_i .eh_abort_handler = iscsi_eh_abort, .eh_device_reset_handler= iscsi_eh_device_reset, .eh_target_reset_handler= iscsi_eh_target_reset, + .target_alloc = iscsi_target_alloc, .use_clustering = DISABLE_CLUSTERING, .proc_name = "iscsi_iser", .this_id = -1, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/input/input.c linux-2.6.30-rc4-git/drivers/input/input.c --- linux-2.6.30-rc4/drivers/input/input.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/input/input.c 2009-05-13 09:46:19.000000000 +0200 @@ -29,6 +29,23 @@ MODULE_LICENSE("GPL"); #define INPUT_DEVICES 256 +/* + * EV_ABS events which should not be cached are listed here. + */ +static unsigned int input_abs_bypass_init_data[] __initdata = { + ABS_MT_TOUCH_MAJOR, + ABS_MT_TOUCH_MINOR, + ABS_MT_WIDTH_MAJOR, + ABS_MT_WIDTH_MINOR, + ABS_MT_ORIENTATION, + ABS_MT_POSITION_X, + ABS_MT_POSITION_Y, + ABS_MT_TOOL_TYPE, + ABS_MT_BLOB_ID, + 0 +}; +static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)]; + static LIST_HEAD(input_dev_list); static LIST_HEAD(input_handler_list); @@ -161,6 +178,10 @@ static void input_handle_event(struct in disposition = INPUT_PASS_TO_HANDLERS; } break; + case SYN_MT_REPORT: + dev->sync = 0; + disposition = INPUT_PASS_TO_HANDLERS; + break; } break; @@ -192,6 +213,11 @@ static void input_handle_event(struct in case EV_ABS: if (is_event_supported(code, dev->absbit, ABS_MAX)) { + if (test_bit(code, input_abs_bypass)) { + disposition = INPUT_PASS_TO_HANDLERS; + break; + } + value = input_defuzz_abs_event(value, dev->abs[code], dev->absfuzz[code]); @@ -1634,10 +1660,20 @@ static const struct file_operations inpu .open = input_open_file, }; +static void __init input_init_abs_bypass(void) +{ + const unsigned int *p; + + for (p = input_abs_bypass_init_data; *p; p++) + input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p); +} + static int __init input_init(void) { int err; + input_init_abs_bypass(); + err = class_register(&input_class); if (err) { printk(KERN_ERR "input: unable to register input_dev class\n"); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/input/keyboard/omap-keypad.c linux-2.6.30-rc4-git/drivers/input/keyboard/omap-keypad.c --- linux-2.6.30-rc4/drivers/input/keyboard/omap-keypad.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/input/keyboard/omap-keypad.c 2009-05-13 09:46:19.000000000 +0200 @@ -100,8 +100,20 @@ static irqreturn_t omap_kp_interrupt(int /* disable keyboard interrupt and schedule for handling */ if (cpu_is_omap24xx()) { int i; - for (i = 0; i < omap_kp->rows; i++) - disable_irq(gpio_to_irq(row_gpios[i])); + + for (i = 0; i < omap_kp->rows; i++) { + int gpio_irq = gpio_to_irq(row_gpios[i]); + /* + * The interrupt which we're currently handling should + * be disabled _nosync() to avoid deadlocks waiting + * for this handler to complete. All others should + * be disabled the regular way for SMP safety. + */ + if (gpio_irq == irq) + disable_irq_nosync(gpio_irq); + else + disable_irq(gpio_irq); + } } else /* disable keyboard interrupt and schedule for handling */ omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/input/mouse/alps.c linux-2.6.30-rc4-git/drivers/input/mouse/alps.c --- linux-2.6.30-rc4/drivers/input/mouse/alps.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/input/mouse/alps.c 2009-05-13 09:46:19.000000000 +0200 @@ -37,6 +37,7 @@ #define ALPS_FW_BK_2 0x40 static const struct alps_model_info alps_model_data[] = { + { { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */ { { 0x33, 0x02, 0x0a }, 0x88, 0xf8, ALPS_OLDPROTO }, /* UMAX-530T */ { { 0x53, 0x02, 0x0a }, 0xf8, 0xf8, 0 }, { { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 }, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/input/mouse/appletouch.c linux-2.6.30-rc4-git/drivers/input/mouse/appletouch.c --- linux-2.6.30-rc4/drivers/input/mouse/appletouch.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/input/mouse/appletouch.c 2009-05-13 09:46:19.000000000 +0200 @@ -255,15 +255,22 @@ MODULE_PARM_DESC(debug, "Activate debugg */ static int atp_geyser_init(struct usb_device *udev) { - char data[8]; + char *data; int size; int i; + int ret; + + data = kmalloc(8, GFP_KERNEL); + if (!data) { + err("Out of memory"); + return -ENOMEM; + } size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), ATP_GEYSER_MODE_READ_REQUEST_ID, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, ATP_GEYSER_MODE_REQUEST_VALUE, - ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000); + ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { dprintk("atp_geyser_init: read error\n"); @@ -271,7 +278,8 @@ static int atp_geyser_init(struct usb_de dprintk("appletouch[%d]: %d\n", i, data[i]); err("Failed to read mode from device."); - return -EIO; + ret = -EIO; + goto out_free; } /* Apply the mode switch */ @@ -281,7 +289,7 @@ static int atp_geyser_init(struct usb_de ATP_GEYSER_MODE_WRITE_REQUEST_ID, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, ATP_GEYSER_MODE_REQUEST_VALUE, - ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000); + ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { dprintk("atp_geyser_init: write error\n"); @@ -289,9 +297,13 @@ static int atp_geyser_init(struct usb_de dprintk("appletouch[%d]: %d\n", i, data[i]); err("Failed to request geyser raw mode"); - return -EIO; + ret = -EIO; + goto out_free; } - return 0; + ret = 0; +out_free: + kfree(data); + return ret; } /* diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/input/mouse/bcm5974.c linux-2.6.30-rc4-git/drivers/input/mouse/bcm5974.c --- linux-2.6.30-rc4/drivers/input/mouse/bcm5974.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/input/mouse/bcm5974.c 2009-05-13 09:46:19.000000000 +0200 @@ -51,6 +51,10 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231 #define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232 +/* Macbook5,1 (unibody), aka wellspring3 */ +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238 #define BCM5974_DEVICE(prod) { \ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ @@ -72,6 +76,10 @@ static const struct usb_device_id bcm597 BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS), + /* Macbook5,1 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS), /* Terminating entry */ {} }; @@ -96,14 +104,23 @@ struct bt_data { u8 rel_y; /* relative y coordinate */ }; -/* trackpad header structure */ -struct tp_header { - u8 unknown1[16]; /* constants, timers, etc */ - u8 fingers; /* number of fingers on trackpad */ - u8 unknown2[9]; /* constants, timers, etc */ +/* trackpad header types */ +enum tp_type { + TYPE1, /* plain trackpad */ + TYPE2 /* button integrated in trackpad */ }; -/* trackpad finger structure */ +/* trackpad finger data offsets, le16-aligned */ +#define FINGER_TYPE1 (13 * sizeof(__le16)) +#define FINGER_TYPE2 (15 * sizeof(__le16)) + +/* trackpad button data offsets */ +#define BUTTON_TYPE2 15 + +/* list of device capability bits */ +#define HAS_INTEGRATED_BUTTON 1 + +/* trackpad finger structure, le16-aligned */ struct tp_finger { __le16 origin; /* zero when switching track finger */ __le16 abs_x; /* absolute x coodinate */ @@ -117,13 +134,11 @@ struct tp_finger { __le16 force_minor; /* trackpad force, minor axis? */ __le16 unused[3]; /* zeros */ __le16 multi; /* one finger: varies, more fingers: constant */ -}; +} __attribute__((packed,aligned(2))); -/* trackpad data structure, empirically at least ten fingers */ -struct tp_data { - struct tp_header header; - struct tp_finger finger[16]; -}; +/* trackpad finger data size, empirically at least ten fingers */ +#define SIZEOF_FINGER sizeof(struct tp_finger) +#define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER) /* device-specific parameters */ struct bcm5974_param { @@ -136,9 +151,12 @@ struct bcm5974_param { /* device-specific configuration */ struct bcm5974_config { int ansi, iso, jis; /* the product id of this device */ + int caps; /* device capability bitmask */ int bt_ep; /* the endpoint of the button interface */ int bt_datalen; /* data length of the button interface */ int tp_ep; /* the endpoint of the trackpad interface */ + enum tp_type tp_type; /* type of trackpad interface */ + int tp_offset; /* offset to trackpad finger data */ int tp_datalen; /* data length of the trackpad interface */ struct bcm5974_param p; /* finger pressure limits */ struct bcm5974_param w; /* finger width limits */ @@ -158,7 +176,7 @@ struct bcm5974 { struct urb *bt_urb; /* button usb request block */ struct bt_data *bt_data; /* button transferred data */ struct urb *tp_urb; /* trackpad usb request block */ - struct tp_data *tp_data; /* trackpad transferred data */ + u8 *tp_data; /* trackpad transferred data */ int fingers; /* number of fingers on trackpad */ }; @@ -183,8 +201,9 @@ static const struct bcm5974_config bcm59 USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, + 0, 0x84, sizeof(struct bt_data), - 0x81, sizeof(struct tp_data), + 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, { DIM_X, DIM_X / SN_COORD, -4824, 5342 }, @@ -194,13 +213,26 @@ static const struct bcm5974_config bcm59 USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, + 0, 0x84, sizeof(struct bt_data), - 0x81, sizeof(struct tp_data), + 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, { DIM_X, DIM_X / SN_COORD, -4824, 4824 }, { DIM_Y, DIM_Y / SN_COORD, -172, 4290 } }, + { + USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING3_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING3_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, + { DIM_X, DIM_X / SN_COORD, -4460, 5166 }, + { DIM_Y, DIM_Y / SN_COORD, -75, 6700 } + }, {} }; @@ -257,6 +289,7 @@ static void setup_events_to_report(struc __set_bit(BTN_TOOL_FINGER, input_dev->keybit); __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); + __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit); __set_bit(BTN_LEFT, input_dev->keybit); } @@ -266,6 +299,11 @@ static int report_bt_state(struct bcm597 if (size != sizeof(struct bt_data)) return -EIO; + dprintk(7, + "bcm5974: button data: %x %x %x %x\n", + dev->bt_data->unknown1, dev->bt_data->button, + dev->bt_data->rel_x, dev->bt_data->rel_y); + input_report_key(dev->input, BTN_LEFT, dev->bt_data->button); input_sync(dev->input); @@ -276,29 +314,37 @@ static int report_bt_state(struct bcm597 static int report_tp_state(struct bcm5974 *dev, int size) { const struct bcm5974_config *c = &dev->cfg; - const struct tp_finger *f = dev->tp_data->finger; + const struct tp_finger *f; struct input_dev *input = dev->input; - const int fingers = (size - 26) / 28; - int raw_p, raw_w, raw_x, raw_y; - int ptest = 0, origin = 0, nmin = 0, nmax = 0; + int raw_p, raw_w, raw_x, raw_y, raw_n; + int ptest = 0, origin = 0, ibt = 0, nmin = 0, nmax = 0; int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0; - if (size < 26 || (size - 26) % 28 != 0) + if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0) return -EIO; + /* finger data, le16-aligned */ + f = (const struct tp_finger *)(dev->tp_data + c->tp_offset); + raw_n = (size - c->tp_offset) / SIZEOF_FINGER; + /* always track the first finger; when detached, start over */ - if (fingers) { + if (raw_n) { raw_p = raw2int(f->force_major); raw_w = raw2int(f->size_major); raw_x = raw2int(f->abs_x); raw_y = raw2int(f->abs_y); dprintk(9, - "bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n", - raw_p, raw_w, raw_x, raw_y); + "bcm5974: " + "raw: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n", + raw_p, raw_w, raw_x, raw_y, raw_n); ptest = int2bound(&c->p, raw_p); origin = raw2int(f->origin); + + /* set the integrated button if applicable */ + if (c->tp_type == TYPE2) + ibt = raw2int(dev->tp_data[BUTTON_TYPE2]); } /* while tracking finger still valid, count all fingers */ @@ -307,12 +353,13 @@ static int report_tp_state(struct bcm597 abs_w = int2bound(&c->w, raw_w); abs_x = int2bound(&c->x, raw_x - c->x.devmin); abs_y = int2bound(&c->y, c->y.devmax - raw_y); - for (; f != dev->tp_data->finger + fingers; f++) { + while (raw_n--) { ptest = int2bound(&c->p, raw2int(f->force_major)); if (ptest > PRESSURE_LOW) nmax++; if (ptest > PRESSURE_HIGH) nmin++; + f++; } } @@ -324,7 +371,8 @@ static int report_tp_state(struct bcm597 input_report_key(input, BTN_TOUCH, dev->fingers > 0); input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1); input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2); - input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2); + input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers == 3); + input_report_key(input, BTN_TOOL_QUADTAP, dev->fingers > 3); input_report_abs(input, ABS_PRESSURE, abs_p); input_report_abs(input, ABS_TOOL_WIDTH, abs_w); @@ -335,11 +383,15 @@ static int report_tp_state(struct bcm597 dprintk(8, "bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d " - "nmin: %d nmax: %d n: %d\n", - abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers); + "nmin: %d nmax: %d n: %d ibt: %d\n", abs_p, abs_w, + abs_x, abs_y, nmin, nmax, dev->fingers, ibt); } + /* type 2 reports button events via ibt only */ + if (c->tp_type == TYPE2) + input_report_key(input, BTN_LEFT, ibt); + input_sync(input); return 0; @@ -649,6 +701,8 @@ static int bcm5974_probe(struct usb_inte input_dev->name = "bcm5974"; input_dev->phys = dev->phys; usb_to_input_id(dev->udev, &input_dev->id); + /* report driver capabilities via the version field */ + input_dev->id.version = cfg->caps; input_dev->dev.parent = &iface->dev; input_set_drvdata(input_dev, dev); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/input/mouse/elantech.c linux-2.6.30-rc4-git/drivers/input/mouse/elantech.c --- linux-2.6.30-rc4/drivers/input/mouse/elantech.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/input/mouse/elantech.c 2009-05-13 09:46:19.000000000 +0200 @@ -1,7 +1,7 @@ /* - * Elantech Touchpad driver (v5) + * Elantech Touchpad driver (v6) * - * Copyright (C) 2007-2008 Arjan Opmeer + * Copyright (C) 2007-2009 Arjan Opmeer * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -178,6 +178,7 @@ static void elantech_report_absolute_v1( struct elantech_data *etd = psmouse->private; unsigned char *packet = psmouse->packet; int fingers; + static int old_fingers; if (etd->fw_version_maj == 0x01) { /* byte 0: D U p1 p2 1 p3 R L @@ -190,6 +191,14 @@ static void elantech_report_absolute_v1( fingers = (packet[0] & 0xc0) >> 6; } + if (etd->jumpy_cursor) { + /* Discard packets that are likely to have bogus coordinates */ + if (fingers > old_fingers) { + elantech_debug("elantech.c: discarding packet\n"); + goto discard_packet_v1; + } + } + input_report_key(dev, BTN_TOUCH, fingers != 0); /* byte 2: x7 x6 x5 x4 x3 x2 x1 x0 @@ -216,6 +225,9 @@ static void elantech_report_absolute_v1( } input_sync(dev); + + discard_packet_v1: + old_fingers = fingers; } /* @@ -363,9 +375,14 @@ static int elantech_set_absolute_mode(st rc = -1; break; } + } + + if (rc == 0) { /* - * Read back reg 0x10. The touchpad is probably initalising - * and not ready until we read back the value we just wrote. + * Read back reg 0x10. For hardware version 1 we must make + * sure the absolute mode bit is set. For hardware version 2 + * the touchpad is probably initalising and not ready until + * we read back the value we just wrote. */ do { rc = elantech_read_reg(psmouse, 0x10, &val); @@ -373,12 +390,18 @@ static int elantech_set_absolute_mode(st break; tries--; elantech_debug("elantech.c: retrying read (%d).\n", - tries); + tries); msleep(ETP_READ_BACK_DELAY); } while (tries > 0); - if (rc) + + if (rc) { pr_err("elantech.c: failed to read back register 0x10.\n"); - break; + } else if (etd->hw_version == 1 && + !(val & ETP_R10_ABSOLUTE_MODE)) { + pr_err("elantech.c: touchpad refuses " + "to switch to absolute mode.\n"); + rc = -1; + } } if (rc) @@ -662,6 +685,17 @@ int elantech_init(struct psmouse *psmous param[0], param[1], param[2]); etd->capabilities = param[0]; + /* + * This firmware seems to suffer from misreporting coordinates when + * a touch action starts causing the mouse cursor or scrolled page + * to jump. Enable a workaround. + */ + if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) { + pr_info("elantech.c: firmware version 2.34 detected, " + "enabling jumpy cursor workaround\n"); + etd->jumpy_cursor = 1; + } + if (elantech_set_absolute_mode(psmouse)) { pr_err("elantech.c: failed to put touchpad into absolute mode.\n"); goto init_fail; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/input/mouse/elantech.h linux-2.6.30-rc4-git/drivers/input/mouse/elantech.h --- linux-2.6.30-rc4/drivers/input/mouse/elantech.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/input/mouse/elantech.h 2009-05-13 09:46:19.000000000 +0200 @@ -1,7 +1,7 @@ /* - * Elantech Touchpad driver (v5) + * Elantech Touchpad driver (v6) * - * Copyright (C) 2007-2008 Arjan Opmeer + * Copyright (C) 2007-2009 Arjan Opmeer * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -104,6 +104,7 @@ struct elantech_data { unsigned char fw_version_min; unsigned char hw_version; unsigned char paritycheck; + unsigned char jumpy_cursor; unsigned char parity[256]; }; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/input/mouse/lifebook.c linux-2.6.30-rc4-git/drivers/input/mouse/lifebook.c --- linux-2.6.30-rc4/drivers/input/mouse/lifebook.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/input/mouse/lifebook.c 2009-05-13 09:46:19.000000000 +0200 @@ -61,6 +61,12 @@ static const struct dmi_system_id lifebo }, }, { + .ident = "Lifebook B-2130", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "ZEPHYR"), + }, + }, + { .ident = "Lifebook B213x/B2150", .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"), diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/input/serio/sa1111ps2.c linux-2.6.30-rc4-git/drivers/input/serio/sa1111ps2.c --- linux-2.6.30-rc4/drivers/input/serio/sa1111ps2.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/input/serio/sa1111ps2.c 2009-05-13 09:46:19.000000000 +0200 @@ -77,7 +77,7 @@ static irqreturn_t ps2_txint(int irq, vo spin_lock(&ps2if->lock); status = sa1111_readl(ps2if->base + SA1111_PS2STAT); if (ps2if->head == ps2if->tail) { - disable_irq(irq); + disable_irq_nosync(irq); /* done */ } else if (status & PS2STAT_TXE) { sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/input/tablet/wacom.h linux-2.6.30-rc4-git/drivers/input/tablet/wacom.h --- linux-2.6.30-rc4/drivers/input/tablet/wacom.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/input/tablet/wacom.h 2009-05-13 09:46:19.000000000 +0200 @@ -11,7 +11,7 @@ * Copyright (c) 2000 Daniel Egger * Copyright (c) 2001 Frederic Lepied * Copyright (c) 2004 Panagiotis Issaris - * Copyright (c) 2002-2008 Ping Cheng + * Copyright (c) 2002-2009 Ping Cheng * * ChangeLog: * v0.1 (vp) - Initial release @@ -67,6 +67,7 @@ * v1.47 (pc) - Added support for Bamboo * v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A) + * v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28 */ /* @@ -87,7 +88,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.49" +#define DRIVER_VERSION "v1.50" #define DRIVER_AUTHOR "Vojtech Pavlik " #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" #define DRIVER_LICENSE "GPL" diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/input/tablet/wacom_sys.c linux-2.6.30-rc4-git/drivers/input/tablet/wacom_sys.c --- linux-2.6.30-rc4/drivers/input/tablet/wacom_sys.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/input/tablet/wacom_sys.c 2009-05-13 09:46:19.000000000 +0200 @@ -289,6 +289,7 @@ static int wacom_parse_hid(struct usb_in 5000); /* 5 secs */ } while (result < 0 && limit++ < 5); + /* No need to parse the Descriptor. It isn't an error though */ if (result < 0) goto out; @@ -368,9 +369,8 @@ static int wacom_parse_hid(struct usb_in } } - result = 0; - out: + result = 0; kfree(report); return result; } @@ -425,6 +425,15 @@ static int wacom_probe(struct usb_interf endpoint = &intf->cur_altsetting->endpoint[0].desc; + /* Initialize touch_x_max and touch_y_max in case it is not defined */ + if (wacom_wac->features->type == TABLETPC) { + features->touch_x_max = 1023; + features->touch_y_max = 1023; + } else { + features->touch_x_max = 0; + features->touch_y_max = 0; + } + /* TabletPC need to retrieve the physical and logical maximum from report descriptor */ if (wacom_wac->features->type == TABLETPC) { if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) { diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/input/touchscreen/tsc2007.c linux-2.6.30-rc4-git/drivers/input/touchscreen/tsc2007.c --- linux-2.6.30-rc4/drivers/input/touchscreen/tsc2007.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/input/touchscreen/tsc2007.c 2009-05-13 09:46:19.000000000 +0200 @@ -235,7 +235,7 @@ static irqreturn_t tsc2007_irq(int irq, spin_lock_irqsave(&ts->lock, flags); if (likely(ts->get_pendown_state())) { - disable_irq(ts->irq); + disable_irq_nosync(ts->irq); hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY), HRTIMER_MODE_REL); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/input/touchscreen/ucb1400_ts.c linux-2.6.30-rc4-git/drivers/input/touchscreen/ucb1400_ts.c --- linux-2.6.30-rc4/drivers/input/touchscreen/ucb1400_ts.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/input/touchscreen/ucb1400_ts.c 2009-05-13 09:46:19.000000000 +0200 @@ -256,7 +256,7 @@ static irqreturn_t ucb1400_hard_irq(int struct ucb1400_ts *ucb = devid; if (irqnr == ucb->irq) { - disable_irq(ucb->irq); + disable_irq_nosync(ucb->irq); ucb->irq_pending = 1; wake_up(&ucb->ts_wait); return IRQ_HANDLED; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/media/video/Kconfig linux-2.6.30-rc4-git/drivers/media/video/Kconfig --- linux-2.6.30-rc4/drivers/media/video/Kconfig 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/media/video/Kconfig 2009-05-13 09:46:19.000000000 +0200 @@ -758,10 +758,14 @@ config VIDEO_MX1 ---help--- This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface +config MX3_VIDEO + bool + config VIDEO_MX3 tristate "i.MX3x Camera Sensor Interface driver" depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA select VIDEOBUF_DMA_CONTIG + select MX3_VIDEO ---help--- This is a v4l2 driver for the i.MX3x Camera Sensor Interface diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/mmc/host/Kconfig linux-2.6.30-rc4-git/drivers/mmc/host/Kconfig --- linux-2.6.30-rc4/drivers/mmc/host/Kconfig 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/mmc/host/Kconfig 2009-05-13 09:46:19.000000000 +0200 @@ -155,7 +155,7 @@ config MMC_ATMELMCI_DMA config MMC_IMX tristate "Motorola i.MX Multimedia Card Interface support" - depends on ARCH_IMX + depends on ARCH_MX1 help This selects the Motorola i.MX Multimedia card Interface. If you have a i.MX platform with a Multimedia Card slot, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/mmc/host/omap.c linux-2.6.30-rc4-git/drivers/mmc/host/omap.c --- linux-2.6.30-rc4/drivers/mmc/host/omap.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/mmc/host/omap.c 2009-05-13 09:46:19.000000000 +0200 @@ -157,8 +157,6 @@ struct mmc_omap_host { struct timer_list dma_timer; unsigned dma_len; - short power_pin; - struct mmc_omap_slot *slots[OMAP_MMC_MAX_SLOTS]; struct mmc_omap_slot *current_slot; spinlock_t slot_lock; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/s390/scsi/zfcp_aux.c linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_aux.c --- linux-2.6.30-rc4/drivers/s390/scsi/zfcp_aux.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_aux.c 2009-05-13 09:46:19.000000000 +0200 @@ -97,9 +97,7 @@ static void __init zfcp_init_device_conf ccw_device_set_online(adapter->ccw_device); zfcp_erp_wait(adapter); - wait_event(adapter->erp_done_wqh, - !(atomic_read(&unit->status) & - ZFCP_STATUS_UNIT_SCSI_WORK_PENDING)); + flush_work(&unit->scsi_work); down(&zfcp_data.config_sema); zfcp_unit_put(unit); @@ -279,6 +277,7 @@ struct zfcp_unit *zfcp_unit_enqueue(stru atomic_set(&unit->refcount, 0); init_waitqueue_head(&unit->remove_wq); + INIT_WORK(&unit->scsi_work, zfcp_scsi_scan); unit->port = port; unit->fcp_lun = fcp_lun; @@ -525,6 +524,8 @@ int zfcp_adapter_enqueue(struct ccw_devi atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status); + zfcp_fc_nameserver_init(adapter); + if (!zfcp_adapter_scsi_register(adapter)) return 0; @@ -553,7 +554,6 @@ void zfcp_adapter_dequeue(struct zfcp_ad cancel_work_sync(&adapter->scan_work); cancel_work_sync(&adapter->stat_work); - cancel_delayed_work_sync(&adapter->nsp.work); zfcp_adapter_scsi_unregister(adapter); sysfs_remove_group(&adapter->ccw_device->dev.kobj, &zfcp_sysfs_adapter_attrs); @@ -671,8 +671,7 @@ void zfcp_port_dequeue(struct zfcp_port list_del(&port->list); write_unlock_irq(&zfcp_data.config_lock); if (port->rport) - fc_remote_port_delete(port->rport); - port->rport = NULL; + port->rport->dd_data = NULL; zfcp_adapter_put(port->adapter); sysfs_remove_group(&port->sysfs_device.kobj, &zfcp_sysfs_port_attrs); device_unregister(&port->sysfs_device); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/s390/scsi/zfcp_ccw.c linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_ccw.c --- linux-2.6.30-rc4/drivers/s390/scsi/zfcp_ccw.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_ccw.c 2009-05-13 09:46:19.000000000 +0200 @@ -108,7 +108,6 @@ static int zfcp_ccw_set_online(struct cc /* initialize request counter */ BUG_ON(!zfcp_reqlist_isempty(adapter)); adapter->req_no = 0; - zfcp_fc_nameserver_init(adapter); zfcp_erp_modify_adapter_status(adapter, "ccsonl1", NULL, ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/s390/scsi/zfcp_cfdc.c linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_cfdc.c --- linux-2.6.30-rc4/drivers/s390/scsi/zfcp_cfdc.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_cfdc.c 2009-05-13 09:46:19.000000000 +0200 @@ -4,7 +4,7 @@ * Userspace interface for accessing the * Access Control Lists / Control File Data Channel * - * Copyright IBM Corporation 2008 + * Copyright IBM Corporation 2008, 2009 */ #define KMSG_COMPONENT "zfcp" @@ -197,6 +197,7 @@ static long zfcp_cfdc_dev_ioctl(struct f retval = -ENXIO; goto free_buffer; } + zfcp_adapter_get(adapter); retval = zfcp_cfdc_sg_setup(data->command, fsf_cfdc->sg, data_user->control_file); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/s390/scsi/zfcp_def.h linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_def.h --- linux-2.6.30-rc4/drivers/s390/scsi/zfcp_def.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_def.h 2009-05-13 09:46:19.000000000 +0200 @@ -255,7 +255,6 @@ enum zfcp_wka_status { /* logical unit status */ #define ZFCP_STATUS_UNIT_SHARED 0x00000004 #define ZFCP_STATUS_UNIT_READONLY 0x00000008 -#define ZFCP_STATUS_UNIT_SCSI_WORK_PENDING 0x00000020 /* FSF request status (this does not have a common part) */ #define ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT 0x00000002 @@ -530,6 +529,7 @@ struct zfcp_unit { struct zfcp_erp_action erp_action; /* pending error recovery */ atomic_t erp_counter; struct zfcp_latencies latencies; + struct work_struct scsi_work; }; /* FSF request */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/s390/scsi/zfcp_erp.c linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_erp.c --- linux-2.6.30-rc4/drivers/s390/scsi/zfcp_erp.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_erp.c 2009-05-13 09:46:19.000000000 +0200 @@ -719,6 +719,7 @@ static void zfcp_erp_adapter_strategy_cl zfcp_qdio_close(adapter); zfcp_fsf_req_dismiss_all(adapter); adapter->fsf_req_seq_no = 0; + zfcp_fc_wka_port_force_offline(&adapter->nsp); /* all ports and units are closed */ zfcp_erp_modify_adapter_status(adapter, "erascl1", NULL, ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR); @@ -1176,48 +1177,6 @@ static void zfcp_erp_action_dequeue(stru } } -struct zfcp_erp_add_work { - struct zfcp_unit *unit; - struct work_struct work; -}; - -static void zfcp_erp_scsi_scan(struct work_struct *work) -{ - struct zfcp_erp_add_work *p = - container_of(work, struct zfcp_erp_add_work, work); - struct zfcp_unit *unit = p->unit; - struct fc_rport *rport = unit->port->rport; - - if (rport && rport->port_state == FC_PORTSTATE_ONLINE) - scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, - scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0); - atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); - zfcp_unit_put(unit); - wake_up(&unit->port->adapter->erp_done_wqh); - kfree(p); -} - -static void zfcp_erp_schedule_work(struct zfcp_unit *unit) -{ - struct zfcp_erp_add_work *p; - - p = kzalloc(sizeof(*p), GFP_KERNEL); - if (!p) { - dev_err(&unit->port->adapter->ccw_device->dev, - "Registering unit 0x%016Lx on port 0x%016Lx failed\n", - (unsigned long long)unit->fcp_lun, - (unsigned long long)unit->port->wwpn); - return; - } - - zfcp_unit_get(unit); - atomic_set_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); - INIT_WORK(&p->work, zfcp_erp_scsi_scan); - p->unit = unit; - if (!queue_work(zfcp_data.work_queue, &p->work)) - zfcp_unit_put(unit); -} - static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) { struct zfcp_adapter *adapter = act->adapter; @@ -1226,11 +1185,11 @@ static void zfcp_erp_action_cleanup(stru switch (act->action) { case ZFCP_ERP_ACTION_REOPEN_UNIT: - flush_work(&port->rport_work); if ((result == ZFCP_ERP_SUCCEEDED) && !unit->device) { - if (!(atomic_read(&unit->status) & - ZFCP_STATUS_UNIT_SCSI_WORK_PENDING)) - zfcp_erp_schedule_work(unit); + zfcp_unit_get(unit); + if (scsi_queue_work(unit->port->adapter->scsi_host, + &unit->scsi_work) <= 0) + zfcp_unit_put(unit); } zfcp_unit_put(unit); break; @@ -1352,6 +1311,11 @@ static int zfcp_erp_thread(void *data) while (!(atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_ERP_THREAD_KILL)) { + + zfcp_rec_dbf_event_thread_lock("erthrd1", adapter); + ignore = down_interruptible(&adapter->erp_ready_sem); + zfcp_rec_dbf_event_thread_lock("erthrd2", adapter); + write_lock_irqsave(&adapter->erp_lock, flags); next = adapter->erp_ready_head.next; write_unlock_irqrestore(&adapter->erp_lock, flags); @@ -1363,10 +1327,6 @@ static int zfcp_erp_thread(void *data) if (zfcp_erp_strategy(act) != ZFCP_ERP_DISMISSED) zfcp_erp_wakeup(adapter); } - - zfcp_rec_dbf_event_thread_lock("erthrd1", adapter); - ignore = down_interruptible(&adapter->erp_ready_sem); - zfcp_rec_dbf_event_thread_lock("erthrd2", adapter); } atomic_clear_mask(ZFCP_STATUS_ADAPTER_ERP_THREAD_UP, &adapter->status); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/s390/scsi/zfcp_ext.h linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_ext.h --- linux-2.6.30-rc4/drivers/s390/scsi/zfcp_ext.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_ext.h 2009-05-13 09:46:19.000000000 +0200 @@ -106,6 +106,7 @@ extern void zfcp_fc_plogi_evaluate(struc extern void zfcp_test_link(struct zfcp_port *); extern void zfcp_fc_link_test_work(struct work_struct *); extern void zfcp_fc_nameserver_init(struct zfcp_adapter *); +extern void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *); /* zfcp_fsf.c */ extern int zfcp_fsf_open_port(struct zfcp_erp_action *); @@ -158,6 +159,7 @@ extern void zfcp_scsi_rport_work(struct extern void zfcp_scsi_schedule_rport_register(struct zfcp_port *); extern void zfcp_scsi_schedule_rport_block(struct zfcp_port *); extern void zfcp_scsi_schedule_rports_block(struct zfcp_adapter *); +extern void zfcp_scsi_scan(struct work_struct *); /* zfcp_sysfs.c */ extern struct attribute_group zfcp_sysfs_unit_attrs; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/s390/scsi/zfcp_fc.c linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_fc.c --- linux-2.6.30-rc4/drivers/s390/scsi/zfcp_fc.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_fc.c 2009-05-13 09:46:19.000000000 +0200 @@ -98,13 +98,6 @@ static void zfcp_wka_port_offline(struct struct zfcp_wka_port *wka_port = container_of(dw, struct zfcp_wka_port, work); - /* Don't wait forvever. If the wka_port is too busy take it offline - through a new call later */ - if (!wait_event_timeout(wka_port->completion_wq, - atomic_read(&wka_port->refcount) == 0, - HZ >> 1)) - return; - mutex_lock(&wka_port->mutex); if ((atomic_read(&wka_port->refcount) != 0) || (wka_port->status != ZFCP_WKA_PORT_ONLINE)) @@ -142,6 +135,14 @@ void zfcp_fc_nameserver_init(struct zfcp INIT_DELAYED_WORK(&wka_port->work, zfcp_wka_port_offline); } +void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *wka) +{ + cancel_delayed_work_sync(&wka->work); + mutex_lock(&wka->mutex); + wka->status = ZFCP_WKA_PORT_OFFLINE; + mutex_unlock(&wka->mutex); +} + static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range, struct fcp_rscn_element *elem) { @@ -372,7 +373,8 @@ static void zfcp_fc_adisc_handler(unsign if (adisc->els.status) { /* request rejected or timed out */ - zfcp_erp_port_forced_reopen(port, 0, "fcadh_1", NULL); + zfcp_erp_port_forced_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, + "fcadh_1", NULL); goto out; } @@ -431,11 +433,6 @@ void zfcp_fc_link_test_work(struct work_ container_of(work, struct zfcp_port, test_link_work); int retval; - if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_UNBLOCKED)) { - zfcp_port_put(port); - return; /* port erp is running and will update rport status */ - } - zfcp_port_get(port); port->rport_task = RPORT_DEL; zfcp_scsi_rport_work(&port->rport_work); @@ -542,6 +539,9 @@ static void zfcp_validate_port(struct zf { struct zfcp_adapter *adapter = port->adapter; + if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_NOESC)) + return; + atomic_clear_mask(ZFCP_STATUS_COMMON_NOESC, &port->status); if ((port->supported_classes != 0) || @@ -602,10 +602,8 @@ static int zfcp_scan_eval_gpn_ft(struct if (acc->wwpn == fc_host_port_name(adapter->scsi_host)) continue; port = zfcp_get_port_by_wwpn(adapter, acc->wwpn); - if (port) { - zfcp_port_get(port); + if (port) continue; - } port = zfcp_port_enqueue(adapter, acc->wwpn, ZFCP_STATUS_COMMON_NOESC, d_id); @@ -637,7 +635,8 @@ int zfcp_scan_ports(struct zfcp_adapter max_entries = chain ? ZFCP_GPN_FT_MAX_ENTRIES : ZFCP_GPN_FT_ENTRIES; max_bytes = chain ? ZFCP_GPN_FT_MAX_SIZE : ZFCP_CT_SIZE_ONE_PAGE; - if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT) + if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT && + fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPIV) return 0; ret = zfcp_wka_port_get(&adapter->nsp); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/s390/scsi/zfcp_fsf.c linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_fsf.c --- linux-2.6.30-rc4/drivers/s390/scsi/zfcp_fsf.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_fsf.c 2009-05-13 09:46:19.000000000 +0200 @@ -172,12 +172,16 @@ static void zfcp_fsf_link_down_info_eval struct fsf_link_down_info *link_down) { struct zfcp_adapter *adapter = req->adapter; + unsigned long flags; if (atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED) return; atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, &adapter->status); + + read_lock_irqsave(&zfcp_data.config_lock, flags); zfcp_scsi_schedule_rports_block(adapter); + read_unlock_irqrestore(&zfcp_data.config_lock, flags); if (!link_down) goto out; @@ -645,30 +649,30 @@ static void zfcp_fsf_exchange_port_data_ } } -static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter) - __releases(&adapter->req_q_lock) - __acquires(&adapter->req_q_lock) +static int zfcp_fsf_sbal_check(struct zfcp_adapter *adapter) { struct zfcp_qdio_queue *req_q = &adapter->req_q; - long ret; - if (atomic_read(&req_q->count) <= -REQUEST_LIST_SIZE) - return -EIO; - if (atomic_read(&req_q->count) > 0) - return 0; + spin_lock_bh(&adapter->req_q_lock); + if (atomic_read(&req_q->count)) + return 1; + spin_unlock_bh(&adapter->req_q_lock); + return 0; +} + +static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter) +{ + long ret; - atomic_dec(&req_q->count); spin_unlock_bh(&adapter->req_q_lock); ret = wait_event_interruptible_timeout(adapter->request_wq, - atomic_read(&req_q->count) >= 0, - 5 * HZ); - spin_lock_bh(&adapter->req_q_lock); - atomic_inc(&req_q->count); - + zfcp_fsf_sbal_check(adapter), 5 * HZ); if (ret > 0) return 0; if (!ret) atomic_inc(&adapter->qdio_outb_full); + + spin_lock_bh(&adapter->req_q_lock); return -EIO; } @@ -766,8 +770,9 @@ static struct zfcp_fsf_req *zfcp_fsf_req static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) { struct zfcp_adapter *adapter = req->adapter; - unsigned long flags; - int idx; + unsigned long flags; + int idx; + int with_qtcb = (req->qtcb != NULL); /* put allocated FSF request into hash table */ spin_lock_irqsave(&adapter->req_list_lock, flags); @@ -789,7 +794,7 @@ static int zfcp_fsf_req_send(struct zfcp } /* Don't increase for unsolicited status */ - if (req->qtcb) + if (with_qtcb) adapter->fsf_req_seq_no++; adapter->req_no++; @@ -1253,13 +1258,13 @@ int zfcp_fsf_exchange_config_data_sync(s spin_lock_bh(&adapter->req_q_lock); if (zfcp_fsf_req_sbal_get(adapter)) - goto out; + goto out_unlock; req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA, 0, NULL); if (IS_ERR(req)) { retval = PTR_ERR(req); - goto out; + goto out_unlock; } sbale = zfcp_qdio_sbale_req(req); @@ -1278,14 +1283,16 @@ int zfcp_fsf_exchange_config_data_sync(s zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); retval = zfcp_fsf_req_send(req); -out: spin_unlock_bh(&adapter->req_q_lock); if (!retval) wait_event(req->completion_wq, req->status & ZFCP_STATUS_FSFREQ_COMPLETED); zfcp_fsf_req_free(req); + return retval; +out_unlock: + spin_unlock_bh(&adapter->req_q_lock); return retval; } @@ -1352,13 +1359,13 @@ int zfcp_fsf_exchange_port_data_sync(str spin_lock_bh(&adapter->req_q_lock); if (zfcp_fsf_req_sbal_get(adapter)) - goto out; + goto out_unlock; req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0, NULL); if (IS_ERR(req)) { retval = PTR_ERR(req); - goto out; + goto out_unlock; } if (data) @@ -1371,14 +1378,18 @@ int zfcp_fsf_exchange_port_data_sync(str req->handler = zfcp_fsf_exchange_port_data_handler; zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); retval = zfcp_fsf_req_send(req); -out: spin_unlock_bh(&adapter->req_q_lock); + if (!retval) wait_event(req->completion_wq, req->status & ZFCP_STATUS_FSFREQ_COMPLETED); zfcp_fsf_req_free(req); return retval; + +out_unlock: + spin_unlock_bh(&adapter->req_q_lock); + return retval; } static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req) @@ -2472,8 +2483,6 @@ out: static void zfcp_fsf_control_file_handler(struct zfcp_fsf_req *req) { - if (req->qtcb->header.fsf_status != FSF_GOOD) - req->status |= ZFCP_STATUS_FSFREQ_ERROR; } /** diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/s390/scsi/zfcp_scsi.c linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_scsi.c --- linux-2.6.30-rc4/drivers/s390/scsi/zfcp_scsi.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_scsi.c 2009-05-13 09:46:19.000000000 +0200 @@ -171,7 +171,7 @@ static int zfcp_scsi_eh_abort_handler(st write_unlock_irqrestore(&adapter->abort_lock, flags); zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL, old_req_id); - return SUCCESS; + return FAILED; /* completion could be in progress */ } old_req->data = NULL; @@ -486,10 +486,12 @@ static void zfcp_set_rport_dev_loss_tmo( */ static void zfcp_scsi_dev_loss_tmo_callbk(struct fc_rport *rport) { - struct zfcp_port *port = rport->dd_data; + struct zfcp_port *port; write_lock_irq(&zfcp_data.config_lock); - port->rport = NULL; + port = rport->dd_data; + if (port) + port->rport = NULL; write_unlock_irq(&zfcp_data.config_lock); } @@ -503,9 +505,18 @@ static void zfcp_scsi_dev_loss_tmo_callb */ static void zfcp_scsi_terminate_rport_io(struct fc_rport *rport) { - struct zfcp_port *port = rport->dd_data; + struct zfcp_port *port; + + write_lock_irq(&zfcp_data.config_lock); + port = rport->dd_data; + if (port) + zfcp_port_get(port); + write_unlock_irq(&zfcp_data.config_lock); - zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL); + if (port) { + zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL); + zfcp_port_put(port); + } } static void zfcp_scsi_rport_register(struct zfcp_port *port) @@ -534,8 +545,10 @@ static void zfcp_scsi_rport_register(str static void zfcp_scsi_rport_block(struct zfcp_port *port) { - if (port->rport) - fc_remote_port_delete(port->rport); + struct fc_rport *rport = port->rport; + + if (rport) + fc_remote_port_delete(rport); } void zfcp_scsi_schedule_rport_register(struct zfcp_port *port) @@ -583,6 +596,23 @@ void zfcp_scsi_rport_work(struct work_st } +void zfcp_scsi_scan(struct work_struct *work) +{ + struct zfcp_unit *unit = container_of(work, struct zfcp_unit, + scsi_work); + struct fc_rport *rport; + + flush_work(&unit->port->rport_work); + rport = unit->port->rport; + + if (rport && rport->port_state == FC_PORTSTATE_ONLINE) + scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, + scsilun_to_int((struct scsi_lun *) + &unit->fcp_lun), 0); + + zfcp_unit_put(unit); +} + struct fc_function_template zfcp_transport_functions = { .show_starget_port_id = 1, .show_starget_port_name = 1, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/s390/scsi/zfcp_sysfs.c linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_sysfs.c --- linux-2.6.30-rc4/drivers/s390/scsi/zfcp_sysfs.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/s390/scsi/zfcp_sysfs.c 2009-05-13 09:46:19.000000000 +0200 @@ -254,12 +254,21 @@ static ssize_t zfcp_sysfs_unit_remove_st write_lock_irq(&zfcp_data.config_lock); unit = zfcp_get_unit_by_lun(port, fcp_lun); - if (unit && (atomic_read(&unit->refcount) == 0)) { - zfcp_unit_get(unit); - atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &unit->status); - list_move(&unit->list, &unit_remove_lh); - } else - unit = NULL; + if (unit) { + write_unlock_irq(&zfcp_data.config_lock); + /* wait for possible timeout during SCSI probe */ + flush_work(&unit->scsi_work); + write_lock_irq(&zfcp_data.config_lock); + + if (atomic_read(&unit->refcount) == 0) { + zfcp_unit_get(unit); + atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, + &unit->status); + list_move(&unit->list, &unit_remove_lh); + } else { + unit = NULL; + } + } write_unlock_irq(&zfcp_data.config_lock); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/cxgb3i/cxgb3i_ddp.c linux-2.6.30-rc4-git/drivers/scsi/cxgb3i/cxgb3i_ddp.c --- linux-2.6.30-rc4/drivers/scsi/cxgb3i/cxgb3i_ddp.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/cxgb3i/cxgb3i_ddp.c 2009-05-13 09:46:19.000000000 +0200 @@ -120,20 +120,26 @@ static void clear_ddp_map(struct cxgb3i_ } static inline int ddp_find_unused_entries(struct cxgb3i_ddp_info *ddp, - int start, int max, int count, + unsigned int start, unsigned int max, + unsigned int count, struct cxgb3i_gather_list *gl) { - unsigned int i, j; + unsigned int i, j, k; + /* not enough entries */ + if ((max - start) < count) + return -EBUSY; + + max -= count; spin_lock(&ddp->map_lock); - for (i = start; i <= max;) { - for (j = 0; j < count; j++) { - if (ddp->gl_map[i + j]) + for (i = start; i < max;) { + for (j = 0, k = i; j < count; j++, k++) { + if (ddp->gl_map[k]) break; } if (j == count) { - for (j = 0; j < count; j++) - ddp->gl_map[i + j] = gl; + for (j = 0, k = i; j < count; j++, k++) + ddp->gl_map[k] = gl; spin_unlock(&ddp->map_lock); return i; } @@ -354,7 +360,7 @@ int cxgb3i_ddp_tag_reserve(struct t3cdev struct cxgb3i_ddp_info *ddp = tdev->ulp_iscsi; struct pagepod_hdr hdr; unsigned int npods; - int idx = -1, idx_max; + int idx = -1; int err = -ENOMEM; u32 sw_tag = *tagp; u32 tag; @@ -367,17 +373,17 @@ int cxgb3i_ddp_tag_reserve(struct t3cdev } npods = (gl->nelem + PPOD_PAGES_MAX - 1) >> PPOD_PAGES_SHIFT; - idx_max = ddp->nppods - npods + 1; if (ddp->idx_last == ddp->nppods) - idx = ddp_find_unused_entries(ddp, 0, idx_max, npods, gl); + idx = ddp_find_unused_entries(ddp, 0, ddp->nppods, npods, gl); else { idx = ddp_find_unused_entries(ddp, ddp->idx_last + 1, - idx_max, npods, gl); - if (idx < 0 && ddp->idx_last >= npods) + ddp->nppods, npods, gl); + if (idx < 0 && ddp->idx_last >= npods) { idx = ddp_find_unused_entries(ddp, 0, - ddp->idx_last - npods + 1, + min(ddp->idx_last + npods, ddp->nppods), npods, gl); + } } if (idx < 0) { ddp_log_debug("xferlen %u, gl %u, npods %u NO DDP.\n", diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/cxgb3i/cxgb3i.h linux-2.6.30-rc4-git/drivers/scsi/cxgb3i/cxgb3i.h --- linux-2.6.30-rc4/drivers/scsi/cxgb3i/cxgb3i.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/cxgb3i/cxgb3i.h 2009-05-13 09:46:19.000000000 +0200 @@ -34,7 +34,7 @@ #include "cxgb3i_offload.h" #include "cxgb3i_ddp.h" -#define CXGB3I_SCSI_QDEPTH_DFLT 128 +#define CXGB3I_SCSI_HOST_QDEPTH 1024 #define CXGB3I_MAX_TARGET CXGB3I_MAX_CONN #define CXGB3I_MAX_LUN 512 #define ISCSI_PDU_NONPAYLOAD_MAX \ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/cxgb3i/cxgb3i_iscsi.c linux-2.6.30-rc4-git/drivers/scsi/cxgb3i/cxgb3i_iscsi.c --- linux-2.6.30-rc4/drivers/scsi/cxgb3i/cxgb3i_iscsi.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/cxgb3i/cxgb3i_iscsi.c 2009-05-13 09:46:19.000000000 +0200 @@ -876,13 +876,14 @@ static struct scsi_host_template cxgb3i_ .proc_name = "cxgb3i", .queuecommand = iscsi_queuecommand, .change_queue_depth = iscsi_change_queue_depth, - .can_queue = CXGB3I_SCSI_QDEPTH_DFLT - 1, + .can_queue = CXGB3I_SCSI_HOST_QDEPTH, .sg_tablesize = SG_ALL, .max_sectors = 0xFFFF, - .cmd_per_lun = CXGB3I_SCSI_QDEPTH_DFLT, + .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN, .eh_abort_handler = iscsi_eh_abort, .eh_device_reset_handler = iscsi_eh_device_reset, .eh_target_reset_handler = iscsi_eh_target_reset, + .target_alloc = iscsi_target_alloc, .use_clustering = DISABLE_CLUSTERING, .this_id = -1, }; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/cxgb3i/cxgb3i_offload.c linux-2.6.30-rc4-git/drivers/scsi/cxgb3i/cxgb3i_offload.c --- linux-2.6.30-rc4/drivers/scsi/cxgb3i/cxgb3i_offload.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/cxgb3i/cxgb3i_offload.c 2009-05-13 09:46:19.000000000 +0200 @@ -1737,7 +1737,7 @@ int cxgb3i_c3cn_send_pdus(struct s3_conn c3cn_tx_debug("c3cn 0x%p, snd %u - %u > %u.\n", c3cn, c3cn->write_seq, c3cn->snd_una, cxgb3_snd_win); - err = -EAGAIN; + err = -ENOBUFS; goto out_err; } @@ -1775,6 +1775,8 @@ done: out_err: if (copied == 0 && err == -EPIPE) copied = c3cn->err ? c3cn->err : -EPIPE; + else + copied = err; goto done; } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/cxgb3i/cxgb3i_pdu.c linux-2.6.30-rc4-git/drivers/scsi/cxgb3i/cxgb3i_pdu.c --- linux-2.6.30-rc4/drivers/scsi/cxgb3i/cxgb3i_pdu.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/cxgb3i/cxgb3i_pdu.c 2009-05-13 09:46:19.000000000 +0200 @@ -400,17 +400,18 @@ int cxgb3i_conn_xmit_pdu(struct iscsi_ta return 0; } - if (err < 0 && err != -EAGAIN) { - kfree_skb(skb); - cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n", - task->itt, skb, skb->len, skb->data_len, err); - iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err); - iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED); + if (err == -EAGAIN || err == -ENOBUFS) { + /* reset skb to send when we are called again */ + tdata->skb = skb; return err; } - /* reset skb to send when we are called again */ - tdata->skb = skb; - return -EAGAIN; + + kfree_skb(skb); + cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n", + task->itt, skb, skb->len, skb->data_len, err); + iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err); + iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED); + return err; } int cxgb3i_pdu_init(void) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/fcoe/fcoe.c linux-2.6.30-rc4-git/drivers/scsi/fcoe/fcoe.c --- linux-2.6.30-rc4/drivers/scsi/fcoe/fcoe.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/fcoe/fcoe.c 2009-05-13 09:46:19.000000000 +0200 @@ -57,7 +57,7 @@ DEFINE_RWLOCK(fcoe_hostlist_lock); DEFINE_TIMER(fcoe_timer, NULL, 0, 0); DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu); -/* Function Prototyes */ +/* Function Prototypes */ static int fcoe_reset(struct Scsi_Host *shost); static int fcoe_xmit(struct fc_lport *, struct fc_frame *); static int fcoe_rcv(struct sk_buff *, struct net_device *, @@ -138,7 +138,6 @@ static struct scsi_host_template fcoe_sh /** * fcoe_lport_config() - sets up the fc_lport * @lp: ptr to the fc_lport - * @shost: ptr to the parent scsi host * * Returns: 0 for success */ @@ -256,6 +255,7 @@ static int fcoe_netdev_config(struct fc_ rtnl_lock(); memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN); dev_unicast_add(fc->real_dev, flogi_maddr, ETH_ALEN); + dev_mc_add(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0); rtnl_unlock(); /* @@ -380,7 +380,7 @@ static int fcoe_if_destroy(struct net_de dev_mc_delete(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0); rtnl_unlock(); - /* Free the per-CPU revieve threads */ + /* Free the per-CPU receive threads */ fcoe_percpu_clean(lp); /* Free existing skbs */ @@ -720,7 +720,7 @@ static void fcoe_percpu_thread_destroy(u } #else /* - * This a non-SMP scenario where the singluar Rx thread is + * This a non-SMP scenario where the singular Rx thread is * being removed. Free all skbs and stop the thread. */ spin_lock_bh(&p->fcoe_rx_list.lock); @@ -777,7 +777,7 @@ static struct notifier_block fcoe_cpu_no * @skb: the receive skb * @dev: associated net device * @ptype: context - * @odldev: last device + * @olddev: last device * * this function will receive the packet and build fc frame and pass it up * @@ -884,7 +884,6 @@ err2: kfree_skb(skb); return -1; } -EXPORT_SYMBOL_GPL(fcoe_rcv); /** * fcoe_start_io() - pass to netdev to start xmit for fcoe @@ -905,7 +904,7 @@ static inline int fcoe_start_io(struct s } /** - * fcoe_get_paged_crc_eof() - in case we need alloc a page for crc_eof + * fcoe_get_paged_crc_eof() - in case we need to alloc a page for crc_eof * @skb: the skb to be xmitted * @tlen: total len * @@ -947,7 +946,7 @@ static int fcoe_get_paged_crc_eof(struct /** * fcoe_fc_crc() - calculates FC CRC in this fcoe skb - * @fp: the fc_frame containg data to be checksummed + * @fp: the fc_frame containing data to be checksummed * * This uses crc32() to calculate the crc for fc frame * Return : 32 bit crc @@ -1011,7 +1010,7 @@ int fcoe_xmit(struct fc_lport *lp, struc wlen = skb->len / FCOE_WORD_TO_BYTE; if (!lp->link_up) { - kfree(skb); + kfree_skb(skb); return 0; } @@ -1062,7 +1061,7 @@ int fcoe_xmit(struct fc_lport *lp, struc cp = NULL; } - /* adjust skb netowrk/transport offsets to match mac/fcoe/fc */ + /* adjust skb network/transport offsets to match mac/fcoe/fc */ skb_push(skb, elen + hlen); skb_reset_mac_header(skb); skb_reset_network_header(skb); @@ -1123,7 +1122,6 @@ int fcoe_xmit(struct fc_lport *lp, struc return 0; } -EXPORT_SYMBOL_GPL(fcoe_xmit); /** * fcoe_percpu_receive_thread() - recv thread per cpu @@ -1296,17 +1294,16 @@ void fcoe_watchdog(ulong vp) /** - * fcoe_check_wait_queue() - put the skb into fcoe pending xmit queue - * @lp: the fc_port for this skb - * @skb: the associated skb to be xmitted + * fcoe_check_wait_queue() - attempt to clear the transmit backlog + * @lp: the fc_lport * * This empties the wait_queue, dequeue the head of the wait_queue queue * and calls fcoe_start_io() for each packet, if all skb have been * transmitted, return qlen or -1 if a error occurs, then restore - * wait_queue and try again later. + * wait_queue and try again later. * * The wait_queue is used when the skb transmit fails. skb will go - * in the wait_queue which will be emptied by the time function OR + * in the wait_queue which will be emptied by the timer function or * by the next skb transmit. * * Returns: 0 for success @@ -1355,10 +1352,6 @@ out: */ static void fcoe_dev_setup() { - /* - * here setup a interface specific wd time to - * monitor the link state - */ register_netdevice_notifier(&fcoe_notifier); } @@ -1437,10 +1430,9 @@ out: /** * fcoe_if_to_netdev() - parse a name buffer to get netdev - * @ifname: fixed array for output parsed ifname * @buffer: incoming buffer to be copied * - * Returns: NULL or ptr to netdeive + * Returns: NULL or ptr to net_device */ static struct net_device *fcoe_if_to_netdev(const char *buffer) { @@ -1458,7 +1450,7 @@ static struct net_device *fcoe_if_to_net } /** - * fcoe_netdev_to_module_owner() - finds out the nic drive moddule of the netdev + * fcoe_netdev_to_module_owner() - finds out the driver module of the netdev * @netdev: the target netdev * * Returns: ptr to the struct module, NULL for failure @@ -1488,7 +1480,7 @@ fcoe_netdev_to_module_owner(const struct * Holds the Ethernet driver module by try_module_get() for * the corresponding netdev. * - * Returns: 0 for succsss + * Returns: 0 for success */ static int fcoe_ethdrv_get(const struct net_device *netdev) { @@ -1510,7 +1502,7 @@ static int fcoe_ethdrv_get(const struct * Releases the Ethernet driver module by module_put for * the corresponding netdev. * - * Returns: 0 for succsss + * Returns: 0 for success */ static int fcoe_ethdrv_put(const struct net_device *netdev) { @@ -1528,7 +1520,7 @@ static int fcoe_ethdrv_put(const struct /** * fcoe_destroy() - handles the destroy from sysfs - * @buffer: expcted to be a eth if name + * @buffer: expected to be an eth if name * @kp: associated kernel param * * Returns: 0 for success @@ -1565,7 +1557,7 @@ out_nodev: /** * fcoe_create() - Handles the create call from sysfs - * @buffer: expcted to be a eth if name + * @buffer: expected to be an eth if name * @kp: associated kernel param * * Returns: 0 for success @@ -1652,7 +1644,6 @@ int fcoe_link_ok(struct fc_lport *lp) return rc; } -EXPORT_SYMBOL_GPL(fcoe_link_ok); /** * fcoe_percpu_clean() - Clear the pending skbs for an lport @@ -1684,7 +1675,6 @@ void fcoe_percpu_clean(struct fc_lport * spin_unlock_bh(&pp->fcoe_rx_list.lock); } } -EXPORT_SYMBOL_GPL(fcoe_percpu_clean); /** * fcoe_clean_pending_queue() - Dequeue a skb and free it @@ -1705,7 +1695,6 @@ void fcoe_clean_pending_queue(struct fc_ } spin_unlock_bh(&fc->fcoe_pending_queue.lock); } -EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue); /** * fcoe_reset() - Resets the fcoe @@ -1719,11 +1708,10 @@ int fcoe_reset(struct Scsi_Host *shost) fc_lport_reset(lport); return 0; } -EXPORT_SYMBOL_GPL(fcoe_reset); /** * fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device - * @device: this is currently ptr to net_device + * @dev: this is currently ptr to net_device * * Returns: NULL or the located fcoe_softc */ @@ -1757,11 +1745,10 @@ struct fc_lport *fcoe_hostlist_lookup(co return (fc) ? fc->ctlr.lp : NULL; } -EXPORT_SYMBOL_GPL(fcoe_hostlist_lookup); /** * fcoe_hostlist_add() - Add a lport to lports list - * @lp: ptr to the fc_lport to badded + * @lp: ptr to the fc_lport to be added * * Returns: 0 for success */ @@ -1778,11 +1765,10 @@ int fcoe_hostlist_add(const struct fc_lp } return 0; } -EXPORT_SYMBOL_GPL(fcoe_hostlist_add); /** * fcoe_hostlist_remove() - remove a lport from lports list - * @lp: ptr to the fc_lport to badded + * @lp: ptr to the fc_lport to be removed * * Returns: 0 for success */ @@ -1798,7 +1784,6 @@ int fcoe_hostlist_remove(const struct fc return 0; } -EXPORT_SYMBOL_GPL(fcoe_hostlist_remove); /** * fcoe_init() - fcoe module loading initialization diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/fcoe/libfcoe.c linux-2.6.30-rc4-git/drivers/scsi/fcoe/libfcoe.c --- linux-2.6.30-rc4/drivers/scsi/fcoe/libfcoe.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/fcoe/libfcoe.c 2009-05-13 09:46:19.000000000 +0200 @@ -122,7 +122,7 @@ static void fcoe_ctlr_reset_fcfs(struct } /** - * fcoe_ctrl_destroy() - Disable and tear-down the FCoE controller. + * fcoe_ctlr_destroy() - Disable and tear-down the FCoE controller. * @fip: FCoE controller. * * This is called by FCoE drivers before freeing the &fcoe_ctlr. diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/ipr.c linux-2.6.30-rc4-git/drivers/scsi/ipr.c --- linux-2.6.30-rc4/drivers/scsi/ipr.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/ipr.c 2009-05-13 09:46:19.000000000 +0200 @@ -3654,6 +3654,7 @@ static int ipr_slave_configure(struct sc { struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata; struct ipr_resource_entry *res; + struct ata_port *ap = NULL; unsigned long lock_flags = 0; spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); @@ -3672,12 +3673,16 @@ static int ipr_slave_configure(struct sc } if (ipr_is_vset_device(res) || ipr_is_scsi_disk(res)) sdev->allow_restart = 1; - if (ipr_is_gata(res) && res->sata_port) { + if (ipr_is_gata(res) && res->sata_port) + ap = res->sata_port->ap; + spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); + + if (ap) { scsi_adjust_queue_depth(sdev, 0, IPR_MAX_CMD_PER_ATA_LUN); - ata_sas_slave_configure(sdev, res->sata_port->ap); - } else { + ata_sas_slave_configure(sdev, ap); + } else scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun); - } + return 0; } spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); return 0; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/iscsi_tcp.c linux-2.6.30-rc4-git/drivers/scsi/iscsi_tcp.c --- linux-2.6.30-rc4/drivers/scsi/iscsi_tcp.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/iscsi_tcp.c 2009-05-13 09:46:19.000000000 +0200 @@ -463,7 +463,7 @@ static int iscsi_sw_tcp_pdu_init(struct } if (err) { - iscsi_conn_failure(conn, err); + /* got invalid offset/len */ return -EIO; } return 0; @@ -851,6 +851,7 @@ static struct scsi_host_template iscsi_s .use_clustering = DISABLE_CLUSTERING, .slave_alloc = iscsi_sw_tcp_slave_alloc, .slave_configure = iscsi_sw_tcp_slave_configure, + .target_alloc = iscsi_target_alloc, .proc_name = "iscsi_tcp", .this_id = -1, }; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/libfc/fc_disc.c linux-2.6.30-rc4-git/drivers/scsi/libfc/fc_disc.c --- linux-2.6.30-rc4/drivers/scsi/libfc/fc_disc.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/libfc/fc_disc.c 2009-05-13 09:46:19.000000000 +0200 @@ -113,6 +113,11 @@ void fc_disc_stop_rports(struct fc_disc lport->tt.rport_logoff(rport); } + list_for_each_entry_safe(rdata, next, &disc->rogue_rports, peers) { + rport = PRIV_TO_RPORT(rdata); + lport->tt.rport_logoff(rport); + } + mutex_unlock(&disc->disc_mutex); } @@ -131,23 +136,32 @@ static void fc_disc_rport_callback(struc { struct fc_rport_libfc_priv *rdata = rport->dd_data; struct fc_disc *disc = &lport->disc; - int found = 0; FC_DEBUG_DISC("Received a %d event for port (%6x)\n", event, rport->port_id); - if (event == RPORT_EV_CREATED) { + switch (event) { + case RPORT_EV_CREATED: if (disc) { - found = 1; mutex_lock(&disc->disc_mutex); list_add_tail(&rdata->peers, &disc->rports); mutex_unlock(&disc->disc_mutex); } + break; + case RPORT_EV_LOGO: + case RPORT_EV_FAILED: + case RPORT_EV_STOP: + mutex_lock(&disc->disc_mutex); + mutex_lock(&rdata->rp_mutex); + if (rdata->trans_state == FC_PORTSTATE_ROGUE) + list_del(&rdata->peers); + mutex_unlock(&rdata->rp_mutex); + mutex_unlock(&disc->disc_mutex); + break; + default: + break; } - if (!found) - FC_DEBUG_DISC("The rport (%6x) is not maintained " - "by the discovery layer\n", rport->port_id); } /** @@ -439,6 +453,7 @@ static int fc_disc_new_target(struct fc_ rdata = rport->dd_data; rdata->ops = &fc_disc_rport_ops; rdata->rp_state = RPORT_ST_INIT; + list_add_tail(&rdata->peers, &disc->rogue_rports); lport->tt.rport_login(rport); } } @@ -461,21 +476,29 @@ static void fc_disc_del_target(struct fc /** * fc_disc_done() - Discovery has been completed * @disc: FC discovery context + * Locking Note: This function expects that the disc mutex is locked before + * it is called. The discovery callback is then made with the lock released, + * and the lock is re-taken before returning from this function */ static void fc_disc_done(struct fc_disc *disc) { struct fc_lport *lport = disc->lport; + enum fc_disc_event event; FC_DEBUG_DISC("Discovery complete for port (%6x)\n", fc_host_port_id(lport->host)); - disc->disc_callback(lport, disc->event); + event = disc->event; disc->event = DISC_EV_NONE; if (disc->requested) fc_disc_gpn_ft_req(disc); else disc->pending = 0; + + mutex_unlock(&disc->disc_mutex); + disc->disc_callback(lport, event); + mutex_lock(&disc->disc_mutex); } /** @@ -622,6 +645,8 @@ static int fc_disc_gpn_ft_parse(struct f rdata = rport->dd_data; rdata->ops = &fc_disc_rport_ops; rdata->local_port = lport; + list_add_tail(&rdata->peers, + &disc->rogue_rports); lport->tt.rport_login(rport); } else FC_DBG("Failed to allocate memory for " @@ -681,8 +706,8 @@ static void fc_disc_timeout(struct work_ * @fp: response frame * @lp_arg: Fibre Channel host port instance * - * Locking Note: This function expects that the disc_mutex is locked - * before it is called. + * Locking Note: This function is called without disc mutex held, and + * should do all its processing with the mutex held */ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, void *disc_arg) @@ -695,11 +720,13 @@ static void fc_disc_gpn_ft_resp(struct f unsigned int len; int error; + mutex_lock(&disc->disc_mutex); FC_DEBUG_DISC("Received a GPN_FT response on port (%6x)\n", fc_host_port_id(disc->lport->host)); if (IS_ERR(fp)) { fc_disc_error(disc, fp); + mutex_unlock(&disc->disc_mutex); return; } @@ -744,6 +771,8 @@ static void fc_disc_gpn_ft_resp(struct f disc->seq_count++; } fc_frame_free(fp); + + mutex_unlock(&disc->disc_mutex); } /** @@ -757,7 +786,6 @@ static void fc_disc_gpn_ft_resp(struct f static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp) { struct fc_lport *lport; - struct fc_rport *rport; struct fc_rport *new_rport; struct fc_rport_libfc_priv *rdata; @@ -766,15 +794,12 @@ static void fc_disc_single(struct fc_dis if (dp->ids.port_id == fc_host_port_id(lport->host)) goto out; - rport = lport->tt.rport_lookup(lport, dp->ids.port_id); - if (rport) - fc_disc_del_target(disc, rport); - new_rport = lport->tt.rport_create(dp); if (new_rport) { rdata = new_rport->dd_data; rdata->ops = &fc_disc_rport_ops; kfree(dp); + list_add_tail(&rdata->peers, &disc->rogue_rports); lport->tt.rport_login(new_rport); } return; @@ -836,6 +861,7 @@ int fc_disc_init(struct fc_lport *lport) INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout); mutex_init(&disc->disc_mutex); INIT_LIST_HEAD(&disc->rports); + INIT_LIST_HEAD(&disc->rogue_rports); disc->lport = lport; disc->delay = FC_DISC_DELAY; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/libfc/fc_elsct.c linux-2.6.30-rc4-git/drivers/scsi/libfc/fc_elsct.c --- linux-2.6.30-rc4/drivers/scsi/libfc/fc_elsct.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/libfc/fc_elsct.c 2009-05-13 09:46:19.000000000 +0200 @@ -41,7 +41,7 @@ static struct fc_seq *fc_elsct_send(stru void *arg, u32 timer_msec) { enum fc_rctl r_ctl; - u32 did; + u32 did = FC_FID_NONE; enum fc_fh_type fh_type; int rc; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/libfc/fc_fcp.c linux-2.6.30-rc4-git/drivers/scsi/libfc/fc_fcp.c --- linux-2.6.30-rc4/drivers/scsi/libfc/fc_fcp.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/libfc/fc_fcp.c 2009-05-13 09:46:19.000000000 +0200 @@ -713,7 +713,7 @@ done: static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg) { struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg; - struct fc_lport *lp; + struct fc_lport *lport = fsp->lp; struct fc_frame_header *fh; struct fcp_txrdy *dd; u8 r_ctl; @@ -724,9 +724,8 @@ static void fc_fcp_recv(struct fc_seq *s fh = fc_frame_header_get(fp); r_ctl = fh->fh_r_ctl; - lp = fsp->lp; - if (!(lp->state & LPORT_ST_READY)) + if (!(lport->state & LPORT_ST_READY)) goto out; if (fc_fcp_lock_pkt(fsp)) goto out; @@ -779,7 +778,7 @@ errout: if (IS_ERR(fp)) fc_fcp_error(fsp, fp); else if (rc == -ENOMEM) - fc_fcp_reduce_can_queue(lp); + fc_fcp_reduce_can_queue(lport); } static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/libfc/fc_lport.c linux-2.6.30-rc4-git/drivers/scsi/libfc/fc_lport.c --- linux-2.6.30-rc4/drivers/scsi/libfc/fc_lport.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/libfc/fc_lport.c 2009-05-13 09:46:19.000000000 +0200 @@ -618,6 +618,11 @@ int fc_fabric_logoff(struct fc_lport *lp { lport->tt.disc_stop_final(lport); mutex_lock(&lport->lp_mutex); + if (lport->dns_rp) + lport->tt.rport_logoff(lport->dns_rp); + mutex_unlock(&lport->lp_mutex); + lport->tt.rport_flush_queue(); + mutex_lock(&lport->lp_mutex); fc_lport_enter_logo(lport); mutex_unlock(&lport->lp_mutex); cancel_delayed_work_sync(&lport->retry_work); @@ -639,7 +644,12 @@ EXPORT_SYMBOL(fc_fabric_logoff); */ int fc_lport_destroy(struct fc_lport *lport) { + mutex_lock(&lport->lp_mutex); + lport->state = LPORT_ST_NONE; + lport->link_up = 0; lport->tt.frame_send = fc_frame_drop; + mutex_unlock(&lport->lp_mutex); + lport->tt.fcp_abort_io(lport); lport->tt.exch_mgr_reset(lport, 0, 0); return 0; @@ -1032,17 +1042,19 @@ static void fc_lport_rft_id_resp(struct FC_DEBUG_LPORT("Received a RFT_ID response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_RFT_ID) { FC_DBG("Received a RFT_ID response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + fh = fc_frame_header_get(fp); ct = fc_frame_payload_get(fp, sizeof(*ct)); @@ -1084,17 +1096,19 @@ static void fc_lport_rpn_id_resp(struct FC_DEBUG_LPORT("Received a RPN_ID response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_RPN_ID) { FC_DBG("Received a RPN_ID response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + fh = fc_frame_header_get(fp); ct = fc_frame_payload_get(fp, sizeof(*ct)); if (fh && ct && fh->fh_type == FC_TYPE_CT && @@ -1134,17 +1148,19 @@ static void fc_lport_scr_resp(struct fc_ FC_DEBUG_LPORT("Received a SCR response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_SCR) { FC_DBG("Received a SCR response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) fc_lport_enter_ready(lport); @@ -1360,17 +1376,19 @@ static void fc_lport_logo_resp(struct fc FC_DEBUG_LPORT("Received a LOGO response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_LOGO) { FC_DBG("Received a LOGO response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) fc_lport_enter_reset(lport); @@ -1400,10 +1418,6 @@ static void fc_lport_enter_logo(struct f fc_lport_state_enter(lport, LPORT_ST_LOGO); - /* DNS session should be closed so we can release it here */ - if (lport->dns_rp) - lport->tt.rport_logoff(lport->dns_rp); - fp = fc_frame_alloc(lport, sizeof(*logo)); if (!fp) { fc_lport_error(lport, fp); @@ -1444,17 +1458,19 @@ static void fc_lport_flogi_resp(struct f FC_DEBUG_LPORT("Received a FLOGI response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_FLOGI) { FC_DBG("Received a FLOGI response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + fh = fc_frame_header_get(fp); did = ntoh24(fh->fh_d_id); if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) { diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/libfc/fc_rport.c linux-2.6.30-rc4-git/drivers/scsi/libfc/fc_rport.c --- linux-2.6.30-rc4/drivers/scsi/libfc/fc_rport.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/libfc/fc_rport.c 2009-05-13 09:46:19.000000000 +0200 @@ -267,6 +267,10 @@ static void fc_rport_work(struct work_st "(%6x).\n", ids.port_id); event = RPORT_EV_FAILED; } + if (rport->port_id != FC_FID_DIR_SERV) + if (rport_ops->event_callback) + rport_ops->event_callback(lport, rport, + RPORT_EV_FAILED); put_device(&rport->dev); rport = new_rport; rdata = new_rport->dd_data; @@ -325,11 +329,20 @@ int fc_rport_login(struct fc_rport *rpor int fc_rport_logoff(struct fc_rport *rport) { struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; mutex_lock(&rdata->rp_mutex); FC_DEBUG_RPORT("Remove port (%6x)\n", rport->port_id); + if (rdata->rp_state == RPORT_ST_NONE) { + FC_DEBUG_RPORT("(%6x): Port (%6x) in NONE state," + " not removing", fc_host_port_id(lport->host), + rport->port_id); + mutex_unlock(&rdata->rp_mutex); + goto out; + } + fc_rport_enter_logo(rport); /* @@ -349,6 +362,7 @@ int fc_rport_logoff(struct fc_rport *rpo mutex_unlock(&rdata->rp_mutex); +out: return 0; } @@ -430,6 +444,7 @@ static void fc_rport_error(struct fc_rpo case RPORT_ST_PRLI: case RPORT_ST_LOGO: rdata->event = RPORT_EV_FAILED; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); break; @@ -494,7 +509,7 @@ static void fc_rport_plogi_resp(struct f struct fc_rport *rport = rp_arg; struct fc_rport_libfc_priv *rdata = rport->dd_data; struct fc_lport *lport = rdata->local_port; - struct fc_els_flogi *plp; + struct fc_els_flogi *plp = NULL; unsigned int tov; u16 csp_seq; u16 cssp_seq; @@ -505,17 +520,19 @@ static void fc_rport_plogi_resp(struct f FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_PLOGI) { FC_DBG("Received a PLOGI response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC && (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) { @@ -614,17 +631,19 @@ static void fc_rport_prli_resp(struct fc FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_PRLI) { FC_DBG("Received a PRLI response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { pp = fc_frame_payload_get(fp, sizeof(*pp)); @@ -646,6 +665,7 @@ static void fc_rport_prli_resp(struct fc } else { FC_DBG("Bad ELS response\n"); rdata->event = RPORT_EV_FAILED; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); } @@ -678,23 +698,26 @@ static void fc_rport_logo_resp(struct fc FC_DEBUG_RPORT("Received a LOGO response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_LOGO) { FC_DEBUG_RPORT("Received a LOGO response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { fc_rport_enter_rtv(rport); } else { FC_DBG("Bad ELS response\n"); rdata->event = RPORT_EV_LOGO; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); } @@ -764,17 +787,19 @@ static void fc_rport_rtv_resp(struct fc_ FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_RTV) { FC_DBG("Received a RTV response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { struct fc_els_rtv_acc *rtv; @@ -1007,6 +1032,8 @@ static void fc_rport_recv_plogi_req(stru default: FC_DEBUG_RPORT("incoming PLOGI from %x in unexpected " "state %d\n", sid, rdata->rp_state); + fc_frame_free(fp); + return; break; } @@ -1098,6 +1125,8 @@ static void fc_rport_recv_prli_req(struc reason = ELS_RJT_NONE; break; default: + fc_frame_free(rx_fp); + return; break; } len = fr_len(rx_fp) - sizeof(*fh); @@ -1227,6 +1256,11 @@ static void fc_rport_recv_prlo_req(struc "while in state %s\n", ntoh24(fh->fh_s_id), fc_rport_state(rport)); + if (rdata->rp_state == RPORT_ST_NONE) { + fc_frame_free(fp); + return; + } + rjt_data.fp = NULL; rjt_data.reason = ELS_RJT_UNAB; rjt_data.explan = ELS_EXPL_NONE; @@ -1256,7 +1290,13 @@ static void fc_rport_recv_logo_req(struc "while in state %s\n", ntoh24(fh->fh_s_id), fc_rport_state(rport)); + if (rdata->rp_state == RPORT_ST_NONE) { + fc_frame_free(fp); + return; + } + rdata->event = RPORT_EV_LOGO; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/libiscsi.c linux-2.6.30-rc4-git/drivers/scsi/libiscsi.c --- linux-2.6.30-rc4/drivers/scsi/libiscsi.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/libiscsi.c 2009-05-13 09:46:19.000000000 +0200 @@ -1463,6 +1463,16 @@ int iscsi_change_queue_depth(struct scsi } EXPORT_SYMBOL_GPL(iscsi_change_queue_depth); +int iscsi_target_alloc(struct scsi_target *starget) +{ + struct iscsi_cls_session *cls_session = starget_to_session(starget); + struct iscsi_session *session = cls_session->dd_data; + + starget->can_queue = session->scsi_cmds_max; + return 0; +} +EXPORT_SYMBOL_GPL(iscsi_target_alloc); + void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session) { struct iscsi_session *session = cls_session->dd_data; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/libiscsi_tcp.c linux-2.6.30-rc4-git/drivers/scsi/libiscsi_tcp.c --- linux-2.6.30-rc4/drivers/scsi/libiscsi_tcp.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/libiscsi_tcp.c 2009-05-13 09:46:19.000000000 +0200 @@ -1036,8 +1036,11 @@ flush: rc = conn->session->tt->init_pdu(task, r2t->data_offset + r2t->sent, r2t->data_count); - if (rc) + if (rc) { + iscsi_conn_failure(conn, ISCSI_ERR_XMIT_FAILED); return rc; + } + r2t->sent += r2t->data_count; goto flush; } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_attr.c linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_attr.c --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_attr.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_attr.c 2009-05-13 09:46:19.000000000 +0200 @@ -51,7 +51,7 @@ #define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8" /** - * lpfc_jedec_to_ascii: Hex to ascii convertor according to JEDEC rules. + * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules * @incr: integer to convert. * @hdw: ascii string holding converted integer plus a string terminator. * @@ -82,7 +82,7 @@ lpfc_jedec_to_ascii(int incr, char hdw[] } /** - * lpfc_drvr_version_show: Return the Emulex driver string with version number. + * lpfc_drvr_version_show - Return the Emulex driver string with version number * @dev: class unused variable. * @attr: device attribute, not used. * @buf: on return contains the module description text. @@ -152,7 +152,7 @@ lpfc_bg_reftag_err_show(struct device *d } /** - * lpfc_info_show: Return some pci info about the host in ascii. + * lpfc_info_show - Return some pci info about the host in ascii * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted text from lpfc_info(). @@ -169,7 +169,7 @@ lpfc_info_show(struct device *dev, struc } /** - * lpfc_serialnum_show: Return the hba serial number in ascii. + * lpfc_serialnum_show - Return the hba serial number in ascii * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted text serial number. @@ -188,7 +188,7 @@ lpfc_serialnum_show(struct device *dev, } /** - * lpfc_temp_sensor_show: Return the temperature sensor level. + * lpfc_temp_sensor_show - Return the temperature sensor level * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted support level. @@ -210,7 +210,7 @@ lpfc_temp_sensor_show(struct device *dev } /** - * lpfc_modeldesc_show: Return the model description of the hba. + * lpfc_modeldesc_show - Return the model description of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd model description. @@ -229,7 +229,7 @@ lpfc_modeldesc_show(struct device *dev, } /** - * lpfc_modelname_show: Return the model name of the hba. + * lpfc_modelname_show - Return the model name of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd model name. @@ -248,7 +248,7 @@ lpfc_modelname_show(struct device *dev, } /** - * lpfc_programtype_show: Return the program type of the hba. + * lpfc_programtype_show - Return the program type of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd program type. @@ -267,7 +267,7 @@ lpfc_programtype_show(struct device *dev } /** - * lpfc_mlomgmt_show: Return the Menlo Maintenance sli flag. + * lpfc_mlomgmt_show - Return the Menlo Maintenance sli flag * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the Menlo Maintenance sli flag. @@ -286,7 +286,7 @@ lpfc_mlomgmt_show(struct device *dev, st } /** - * lpfc_vportnum_show: Return the port number in ascii of the hba. + * lpfc_vportnum_show - Return the port number in ascii of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains scsi vpd program type. @@ -305,7 +305,7 @@ lpfc_vportnum_show(struct device *dev, s } /** - * lpfc_fwrev_show: Return the firmware rev running in the hba. + * lpfc_fwrev_show - Return the firmware rev running in the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd program type. @@ -326,7 +326,7 @@ lpfc_fwrev_show(struct device *dev, stru } /** - * lpfc_hdw_show: Return the jedec information about the hba. + * lpfc_hdw_show - Return the jedec information about the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd program type. @@ -347,7 +347,7 @@ lpfc_hdw_show(struct device *dev, struct } /** - * lpfc_option_rom_version_show: Return the adapter ROM FCode version. + * lpfc_option_rom_version_show - Return the adapter ROM FCode version * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the ROM and FCode ascii strings. @@ -366,7 +366,7 @@ lpfc_option_rom_version_show(struct devi } /** - * lpfc_state_show: Return the link state of the port. + * lpfc_state_show - Return the link state of the port * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains text describing the state of the link. @@ -451,7 +451,7 @@ lpfc_link_state_show(struct device *dev, } /** - * lpfc_num_discovered_ports_show: Return sum of mapped and unmapped vports. + * lpfc_num_discovered_ports_show - Return sum of mapped and unmapped vports * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the sum of fc mapped and unmapped. @@ -474,7 +474,7 @@ lpfc_num_discovered_ports_show(struct de } /** - * lpfc_issue_lip: Misnomer, name carried over from long ago. + * lpfc_issue_lip - Misnomer, name carried over from long ago * @shost: Scsi_Host pointer. * * Description: @@ -529,7 +529,7 @@ lpfc_issue_lip(struct Scsi_Host *shost) } /** - * lpfc_do_offline: Issues a mailbox command to bring the link down. + * lpfc_do_offline - Issues a mailbox command to bring the link down * @phba: lpfc_hba pointer. * @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL. * @@ -537,7 +537,7 @@ lpfc_issue_lip(struct Scsi_Host *shost) * Assumes any error from lpfc_do_offline() will be negative. * Can wait up to 5 seconds for the port ring buffers count * to reach zero, prints a warning if it is not zero and continues. - * lpfc_workq_post_event() returns a non-zero return coce if call fails. + * lpfc_workq_post_event() returns a non-zero return code if call fails. * * Returns: * -EIO error posting the event @@ -591,7 +591,7 @@ lpfc_do_offline(struct lpfc_hba *phba, u } /** - * lpfc_selective_reset: Offline then onlines the port. + * lpfc_selective_reset - Offline then onlines the port * @phba: lpfc_hba pointer. * * Description: @@ -632,7 +632,7 @@ lpfc_selective_reset(struct lpfc_hba *ph } /** - * lpfc_issue_reset: Selectively resets an adapter. + * lpfc_issue_reset - Selectively resets an adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the string "selective". @@ -672,7 +672,7 @@ lpfc_issue_reset(struct device *dev, str } /** - * lpfc_nport_evt_cnt_show: Return the number of nport events. + * lpfc_nport_evt_cnt_show - Return the number of nport events * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the ascii number of nport events. @@ -691,7 +691,7 @@ lpfc_nport_evt_cnt_show(struct device *d } /** - * lpfc_board_mode_show: Return the state of the board. + * lpfc_board_mode_show - Return the state of the board * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the state of the adapter. @@ -720,7 +720,7 @@ lpfc_board_mode_show(struct device *dev, } /** - * lpfc_board_mode_store: Puts the hba in online, offline, warm or error state. + * lpfc_board_mode_store - Puts the hba in online, offline, warm or error state * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing one of the strings "online", "offline", "warm" or "error". @@ -766,14 +766,14 @@ lpfc_board_mode_store(struct device *dev } /** - * lpfc_get_hba_info: Return various bits of informaton about the adapter. + * lpfc_get_hba_info - Return various bits of informaton about the adapter * @phba: pointer to the adapter structure. - * @mxri max xri count. - * @axri available xri count. - * @mrpi max rpi count. - * @arpi available rpi count. - * @mvpi max vpi count. - * @avpi available vpi count. + * @mxri: max xri count. + * @axri: available xri count. + * @mrpi: max rpi count. + * @arpi: available rpi count. + * @mvpi: max vpi count. + * @avpi: available vpi count. * * Description: * If an integer pointer for an count is not null then the value for the @@ -846,7 +846,7 @@ lpfc_get_hba_info(struct lpfc_hba *phba, } /** - * lpfc_max_rpi_show: Return maximum rpi. + * lpfc_max_rpi_show - Return maximum rpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the maximum rpi count in decimal or "Unknown". @@ -874,7 +874,7 @@ lpfc_max_rpi_show(struct device *dev, st } /** - * lpfc_used_rpi_show: Return maximum rpi minus available rpi. + * lpfc_used_rpi_show - Return maximum rpi minus available rpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the used rpi count in decimal or "Unknown". @@ -902,7 +902,7 @@ lpfc_used_rpi_show(struct device *dev, s } /** - * lpfc_max_xri_show: Return maximum xri. + * lpfc_max_xri_show - Return maximum xri * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the maximum xri count in decimal or "Unknown". @@ -930,7 +930,7 @@ lpfc_max_xri_show(struct device *dev, st } /** - * lpfc_used_xri_show: Return maximum xpi minus the available xpi. + * lpfc_used_xri_show - Return maximum xpi minus the available xpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the used xri count in decimal or "Unknown". @@ -958,7 +958,7 @@ lpfc_used_xri_show(struct device *dev, s } /** - * lpfc_max_vpi_show: Return maximum vpi. + * lpfc_max_vpi_show - Return maximum vpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the maximum vpi count in decimal or "Unknown". @@ -986,7 +986,7 @@ lpfc_max_vpi_show(struct device *dev, st } /** - * lpfc_used_vpi_show: Return maximum vpi minus the available vpi. + * lpfc_used_vpi_show - Return maximum vpi minus the available vpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the used vpi count in decimal or "Unknown". @@ -1014,7 +1014,7 @@ lpfc_used_vpi_show(struct device *dev, s } /** - * lpfc_npiv_info_show: Return text about NPIV support for the adapter. + * lpfc_npiv_info_show - Return text about NPIV support for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: text that must be interpreted to determine if npiv is supported. @@ -1042,7 +1042,7 @@ lpfc_npiv_info_show(struct device *dev, } /** - * lpfc_poll_show: Return text about poll support for the adapter. + * lpfc_poll_show - Return text about poll support for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the cfg_poll in hex. @@ -1064,7 +1064,7 @@ lpfc_poll_show(struct device *dev, struc } /** - * lpfc_poll_store: Set the value of cfg_poll for the adapter. + * lpfc_poll_store - Set the value of cfg_poll for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: one or more lpfc_polling_flags values. @@ -1136,7 +1136,7 @@ lpfc_poll_store(struct device *dev, stru } /** - * lpfc_param_show: Return a cfg attribute value in decimal. + * lpfc_param_show - Return a cfg attribute value in decimal * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1164,7 +1164,7 @@ lpfc_##attr##_show(struct device *dev, s } /** - * lpfc_param_hex_show: Return a cfg attribute value in hex. + * lpfc_param_hex_show - Return a cfg attribute value in hex * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1173,7 +1173,7 @@ lpfc_##attr##_show(struct device *dev, s * lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the attribute value in hexidecimal. + * @buf: on return contains the attribute value in hexadecimal. * * Returns: size of formatted string. **/ @@ -1192,7 +1192,7 @@ lpfc_##attr##_show(struct device *dev, s } /** - * lpfc_param_init: Intializes a cfg attribute. + * lpfc_param_init - Intializes a cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1226,7 +1226,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba } /** - * lpfc_param_set: Set a cfg attribute value. + * lpfc_param_set - Set a cfg attribute value * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1260,7 +1260,7 @@ lpfc_##attr##_set(struct lpfc_hba *phba, } /** - * lpfc_param_store: Set a vport attribute value. + * lpfc_param_store - Set a vport attribute value * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1300,7 +1300,7 @@ lpfc_##attr##_store(struct device *dev, } /** - * lpfc_vport_param_show: Return decimal formatted cfg attribute value. + * lpfc_vport_param_show - Return decimal formatted cfg attribute value * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1326,17 +1326,17 @@ lpfc_##attr##_show(struct device *dev, s } /** - * lpfc_vport_param_hex_show: Return hex formatted attribute value. + * lpfc_vport_param_hex_show - Return hex formatted attribute value * * Description: * Macro that given an attr e.g. * hba_queue_depth expands into a function with the name * lpfc_hba_queue_depth_show * - * lpfc_##attr##_show: prints the attribute value in hexidecimal. + * lpfc_##attr##_show: prints the attribute value in hexadecimal. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the attribute value in hexidecimal. + * @buf: on return contains the attribute value in hexadecimal. * * Returns: length of formatted string. **/ @@ -1353,7 +1353,7 @@ lpfc_##attr##_show(struct device *dev, s } /** - * lpfc_vport_param_init: Initialize a vport cfg attribute. + * lpfc_vport_param_init - Initialize a vport cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1386,7 +1386,7 @@ lpfc_##attr##_init(struct lpfc_vport *vp } /** - * lpfc_vport_param_set: Set a vport cfg attribute. + * lpfc_vport_param_set - Set a vport cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1417,7 +1417,7 @@ lpfc_##attr##_set(struct lpfc_vport *vpo } /** - * lpfc_vport_param_store: Set a vport attribute. + * lpfc_vport_param_store - Set a vport attribute * * Description: * Macro that given an attr e.g. hba_queue_depth @@ -1576,7 +1576,7 @@ static DEVICE_ATTR(lpfc_temp_sensor, S_I static char *lpfc_soft_wwn_key = "C99G71SL8032A"; /** - * lpfc_soft_wwn_enable_store: Allows setting of the wwn if the key is valid. + * lpfc_soft_wwn_enable_store - Allows setting of the wwn if the key is valid * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the string lpfc_soft_wwn_key. @@ -1623,10 +1623,10 @@ static DEVICE_ATTR(lpfc_soft_wwn_enable, lpfc_soft_wwn_enable_store); /** - * lpfc_soft_wwpn_show: Return the cfg soft ww port name of the adapter. + * lpfc_soft_wwpn_show - Return the cfg soft ww port name of the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the wwpn in hexidecimal. + * @buf: on return contains the wwpn in hexadecimal. * * Returns: size of formatted string. **/ @@ -1643,10 +1643,10 @@ lpfc_soft_wwpn_show(struct device *dev, } /** - * lpfc_soft_wwpn_store: Set the ww port name of the adapter. + * lpfc_soft_wwpn_store - Set the ww port name of the adapter * @dev class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: contains the wwpn in hexidecimal. + * @buf: contains the wwpn in hexadecimal. * @count: number of wwpn bytes in buf * * Returns: @@ -1729,10 +1729,10 @@ static DEVICE_ATTR(lpfc_soft_wwpn, S_IRU lpfc_soft_wwpn_show, lpfc_soft_wwpn_store); /** - * lpfc_soft_wwnn_show: Return the cfg soft ww node name for the adapter. + * lpfc_soft_wwnn_show - Return the cfg soft ww node name for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the wwnn in hexidecimal. + * @buf: on return contains the wwnn in hexadecimal. * * Returns: size of formatted string. **/ @@ -1747,9 +1747,9 @@ lpfc_soft_wwnn_show(struct device *dev, } /** - * lpfc_soft_wwnn_store: sets the ww node name of the adapter. + * lpfc_soft_wwnn_store - sets the ww node name of the adapter * @cdev: class device that is converted into a Scsi_host. - * @buf: contains the ww node name in hexidecimal. + * @buf: contains the ww node name in hexadecimal. * @count: number of wwnn bytes in buf. * * Returns: @@ -1845,7 +1845,7 @@ MODULE_PARM_DESC(lpfc_nodev_tmo, "for a device to come back"); /** - * lpfc_nodev_tmo_show: Return the hba dev loss timeout value. + * lpfc_nodev_tmo_show - Return the hba dev loss timeout value * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the dev loss timeout in decimal. @@ -1864,7 +1864,7 @@ lpfc_nodev_tmo_show(struct device *dev, } /** - * lpfc_nodev_tmo_init: Set the hba nodev timeout value. + * lpfc_nodev_tmo_init - Set the hba nodev timeout value * @vport: lpfc vport structure pointer. * @val: contains the nodev timeout value. * @@ -1905,7 +1905,7 @@ lpfc_nodev_tmo_init(struct lpfc_vport *v } /** - * lpfc_update_rport_devloss_tmo: Update dev loss tmo value. + * lpfc_update_rport_devloss_tmo - Update dev loss tmo value * @vport: lpfc vport structure pointer. * * Description: @@ -1926,7 +1926,7 @@ lpfc_update_rport_devloss_tmo(struct lpf } /** - * lpfc_nodev_tmo_set: Set the vport nodev tmo and devloss tmo values. + * lpfc_nodev_tmo_set - Set the vport nodev tmo and devloss tmo values * @vport: lpfc vport structure pointer. * @val: contains the tmo value. * @@ -1982,7 +1982,7 @@ lpfc_vport_param_init(devloss_tmo, LPFC_ lpfc_vport_param_show(devloss_tmo) /** - * lpfc_devloss_tmo_set: Sets vport nodev tmo, devloss tmo values, changed bit. + * lpfc_devloss_tmo_set - Sets vport nodev tmo, devloss tmo values, changed bit * @vport: lpfc vport structure pointer. * @val: contains the tmo value. * @@ -2094,7 +2094,7 @@ MODULE_PARM_DESC(lpfc_restrict_login, lpfc_vport_param_show(restrict_login); /** - * lpfc_restrict_login_init: Set the vport restrict login flag. + * lpfc_restrict_login_init - Set the vport restrict login flag * @vport: lpfc vport structure pointer. * @val: contains the restrict login value. * @@ -2128,7 +2128,7 @@ lpfc_restrict_login_init(struct lpfc_vpo } /** - * lpfc_restrict_login_set: Set the vport restrict login flag. + * lpfc_restrict_login_set - Set the vport restrict login flag * @vport: lpfc vport structure pointer. * @val: contains the restrict login value. * @@ -2201,7 +2201,7 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1, */ /** - * lpfc_topology_set: Set the adapters topology field. + * lpfc_topology_set - Set the adapters topology field * @phba: lpfc_hba pointer. * @val: topology value. * @@ -2216,18 +2216,41 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1, * non-zero return value from lpfc_issue_lip() * -EINVAL val out of range **/ -static int -lpfc_topology_set(struct lpfc_hba *phba, int val) +static ssize_t +lpfc_topology_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val = 0; + int nolip = 0; + const char *val_buf = buf; int err; uint32_t prev_val; + + if (!strncmp(buf, "nolip ", strlen("nolip "))) { + nolip = 1; + val_buf = &buf[strlen("nolip ")]; + } + + if (!isdigit(val_buf[0])) + return -EINVAL; + if (sscanf(val_buf, "%i", &val) != 1) + return -EINVAL; + if (val >= 0 && val <= 6) { prev_val = phba->cfg_topology; phba->cfg_topology = val; + if (nolip) + return strlen(buf); + err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); - if (err) + if (err) { phba->cfg_topology = prev_val; - return err; + return -EINVAL; + } else + return strlen(buf); } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "%d:0467 lpfc_topology attribute cannot be set to %d, " @@ -2240,14 +2263,12 @@ module_param(lpfc_topology, int, 0); MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology"); lpfc_param_show(topology) lpfc_param_init(topology, 0, 0, 6) -lpfc_param_store(topology) static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR, lpfc_topology_show, lpfc_topology_store); /** - * lpfc_stat_data_ctrl_store: write call back for lpfc_stat_data_ctrl - * sysfs file. + * lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file * @dev: Pointer to class device. * @buf: Data buffer. * @count: Size of the data buffer. @@ -2282,7 +2303,7 @@ lpfc_stat_data_ctrl_store(struct device unsigned long base, step, bucket_type; if (!strncmp(buf, "setbucket", strlen("setbucket"))) { - if (strlen(buf) > LPFC_MAX_DATA_CTRL_LEN) + if (strlen(buf) > (LPFC_MAX_DATA_CTRL_LEN - 1)) return -EINVAL; strcpy(bucket_data, buf); @@ -2411,8 +2432,7 @@ lpfc_stat_data_ctrl_store(struct device /** - * lpfc_stat_data_ctrl_show: Read callback function for - * lpfc_stat_data_ctrl sysfs file. + * lpfc_stat_data_ctrl_show - Read function for lpfc_stat_data_ctrl sysfs file * @dev: Pointer to class device object. * @buf: Data buffer. * @@ -2489,8 +2509,7 @@ static DEVICE_ATTR(lpfc_stat_data_ctrl, /** - * sysfs_drvr_stat_data_read: Read callback function for lpfc_drvr_stat_data - * sysfs attribute. + * sysfs_drvr_stat_data_read - Read function for lpfc_drvr_stat_data attribute * @kobj: Pointer to the kernel object * @bin_attr: Attribute object * @buff: Buffer pointer @@ -2585,7 +2604,7 @@ static struct bin_attribute sysfs_drvr_s */ /** - * lpfc_link_speed_set: Set the adapters link speed. + * lpfc_link_speed_set - Set the adapters link speed * @phba: lpfc_hba pointer. * @val: link speed value. * @@ -2601,12 +2620,29 @@ static struct bin_attribute sysfs_drvr_s * non-zero return value from lpfc_issue_lip() * -EINVAL val out of range **/ -static int -lpfc_link_speed_set(struct lpfc_hba *phba, int val) +static ssize_t +lpfc_link_speed_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val = 0; + int nolip = 0; + const char *val_buf = buf; int err; uint32_t prev_val; + if (!strncmp(buf, "nolip ", strlen("nolip "))) { + nolip = 1; + val_buf = &buf[strlen("nolip ")]; + } + + if (!isdigit(val_buf[0])) + return -EINVAL; + if (sscanf(val_buf, "%i", &val) != 1) + return -EINVAL; + if (((val == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) || ((val == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) || ((val == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) || @@ -2614,14 +2650,19 @@ lpfc_link_speed_set(struct lpfc_hba *phb ((val == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb))) return -EINVAL; - if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED) + if ((val >= 0 && val <= 8) && (LPFC_LINK_SPEED_BITMAP & (1 << val))) { prev_val = phba->cfg_link_speed; phba->cfg_link_speed = val; + if (nolip) + return strlen(buf); + err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); - if (err) + if (err) { phba->cfg_link_speed = prev_val; - return err; + return -EINVAL; + } else + return strlen(buf); } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, @@ -2637,7 +2678,7 @@ MODULE_PARM_DESC(lpfc_link_speed, "Selec lpfc_param_show(link_speed) /** - * lpfc_link_speed_init: Set the adapters link speed. + * lpfc_link_speed_init - Set the adapters link speed * @phba: lpfc_hba pointer. * @val: link speed value. * @@ -2668,7 +2709,6 @@ lpfc_link_speed_init(struct lpfc_hba *ph return -EINVAL; } -lpfc_param_store(link_speed) static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR, lpfc_link_speed_show, lpfc_link_speed_store); @@ -2865,7 +2905,7 @@ MODULE_PARM_DESC(lpfc_prot_guard, "host /* - * lpfc_sg_seg_cnt: Initial Maximum DMA Segment Count + * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count * This value can be set to values between 64 and 256. The default value is * 64, but may be increased to allow for larger Max I/O sizes. The scsi layer * will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE). @@ -2967,7 +3007,7 @@ struct device_attribute *lpfc_vport_attr }; /** - * sysfs_ctlreg_write: Write method for writing to ctlreg. + * sysfs_ctlreg_write - Write method for writing to ctlreg * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: contains the data to be written to the adapter IOREG space. @@ -3017,7 +3057,7 @@ sysfs_ctlreg_write(struct kobject *kobj, } /** - * sysfs_ctlreg_read: Read method for reading from ctlreg. + * sysfs_ctlreg_read - Read method for reading from ctlreg * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: if succesful contains the data from the adapter IOREG space. @@ -3078,7 +3118,7 @@ static struct bin_attribute sysfs_ctlreg }; /** - * sysfs_mbox_idle: frees the sysfs mailbox. + * sysfs_mbox_idle - frees the sysfs mailbox * @phba: lpfc_hba pointer **/ static void @@ -3095,7 +3135,7 @@ sysfs_mbox_idle(struct lpfc_hba *phba) } /** - * sysfs_mbox_write: Write method for writing information via mbox. + * sysfs_mbox_write - Write method for writing information via mbox * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: contains the data to be written to sysfs mbox. @@ -3170,7 +3210,7 @@ sysfs_mbox_write(struct kobject *kobj, s } /** - * sysfs_mbox_read: Read method for reading information via mbox. + * sysfs_mbox_read - Read method for reading information via mbox * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: contains the data to be read from sysfs mbox. @@ -3374,7 +3414,7 @@ static struct bin_attribute sysfs_mbox_a }; /** - * lpfc_alloc_sysfs_attr: Creates the ctlreg and mbox entries. + * lpfc_alloc_sysfs_attr - Creates the ctlreg and mbox entries * @vport: address of lpfc vport structure. * * Return codes: @@ -3415,7 +3455,7 @@ out: } /** - * lpfc_free_sysfs_attr: Removes the ctlreg and mbox entries. + * lpfc_free_sysfs_attr - Removes the ctlreg and mbox entries * @vport: address of lpfc vport structure. **/ void @@ -3437,7 +3477,7 @@ lpfc_free_sysfs_attr(struct lpfc_vport * */ /** - * lpfc_get_host_port_id: Copy the vport DID into the scsi host port id. + * lpfc_get_host_port_id - Copy the vport DID into the scsi host port id * @shost: kernel scsi host pointer. **/ static void @@ -3450,7 +3490,7 @@ lpfc_get_host_port_id(struct Scsi_Host * } /** - * lpfc_get_host_port_type: Set the value of the scsi host port type. + * lpfc_get_host_port_type - Set the value of the scsi host port type * @shost: kernel scsi host pointer. **/ static void @@ -3482,7 +3522,7 @@ lpfc_get_host_port_type(struct Scsi_Host } /** - * lpfc_get_host_port_state: Set the value of the scsi host port state. + * lpfc_get_host_port_state - Set the value of the scsi host port state * @shost: kernel scsi host pointer. **/ static void @@ -3520,7 +3560,7 @@ lpfc_get_host_port_state(struct Scsi_Hos } /** - * lpfc_get_host_speed: Set the value of the scsi host speed. + * lpfc_get_host_speed - Set the value of the scsi host speed * @shost: kernel scsi host pointer. **/ static void @@ -3556,7 +3596,7 @@ lpfc_get_host_speed(struct Scsi_Host *sh } /** - * lpfc_get_host_fabric_name: Set the value of the scsi host fabric name. + * lpfc_get_host_fabric_name - Set the value of the scsi host fabric name * @shost: kernel scsi host pointer. **/ static void @@ -3582,7 +3622,7 @@ lpfc_get_host_fabric_name (struct Scsi_H } /** - * lpfc_get_stats: Return statistical information about the adapter. + * lpfc_get_stats - Return statistical information about the adapter * @shost: kernel scsi host pointer. * * Notes: @@ -3707,7 +3747,7 @@ lpfc_get_stats(struct Scsi_Host *shost) } /** - * lpfc_reset_stats: Copy the adapter link stats information. + * lpfc_reset_stats - Copy the adapter link stats information * @shost: kernel scsi host pointer. **/ static void @@ -3788,7 +3828,7 @@ lpfc_reset_stats(struct Scsi_Host *shost */ /** - * lpfc_get_node_by_target: Return the nodelist for a target. + * lpfc_get_node_by_target - Return the nodelist for a target * @starget: kernel scsi target pointer. * * Returns: @@ -3817,7 +3857,7 @@ lpfc_get_node_by_target(struct scsi_targ } /** - * lpfc_get_starget_port_id: Set the target port id to the ndlp DID or -1. + * lpfc_get_starget_port_id - Set the target port id to the ndlp DID or -1 * @starget: kernel scsi target pointer. **/ static void @@ -3829,7 +3869,7 @@ lpfc_get_starget_port_id(struct scsi_tar } /** - * lpfc_get_starget_node_name: Set the target node name. + * lpfc_get_starget_node_name - Set the target node name * @starget: kernel scsi target pointer. * * Description: Set the target node name to the ndlp node name wwn or zero. @@ -3844,7 +3884,7 @@ lpfc_get_starget_node_name(struct scsi_t } /** - * lpfc_get_starget_port_name: Set the target port name. + * lpfc_get_starget_port_name - Set the target port name * @starget: kernel scsi target pointer. * * Description: set the target port name to the ndlp port name wwn or zero. @@ -3859,7 +3899,7 @@ lpfc_get_starget_port_name(struct scsi_t } /** - * lpfc_set_rport_loss_tmo: Set the rport dev loss tmo. + * lpfc_set_rport_loss_tmo - Set the rport dev loss tmo * @rport: fc rport address. * @timeout: new value for dev loss tmo. * @@ -3877,7 +3917,7 @@ lpfc_set_rport_loss_tmo(struct fc_rport } /** - * lpfc_rport_show_function: Return rport target information. + * lpfc_rport_show_function - Return rport target information * * Description: * Macro that uses field to generate a function with the name lpfc_show_rport_ @@ -3905,7 +3945,7 @@ lpfc_show_rport_##field (struct device * static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL) /** - * lpfc_set_vport_symbolic_name: Set the vport's symbolic name. + * lpfc_set_vport_symbolic_name - Set the vport's symbolic name * @fc_vport: The fc_vport who's symbolic name has been changed. * * Description: @@ -4048,7 +4088,7 @@ struct fc_function_template lpfc_vport_t }; /** - * lpfc_get_cfgparam: Used during probe_one to init the adapter structure. + * lpfc_get_cfgparam - Used during probe_one to init the adapter structure * @phba: lpfc_hba pointer. **/ void @@ -4097,7 +4137,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) } /** - * lpfc_get_vport_cfgparam: Used during port create, init the vport structure. + * lpfc_get_vport_cfgparam - Used during port create, init the vport structure * @vport: lpfc_vport pointer. **/ void diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_crtn.h linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_crtn.h --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_crtn.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_crtn.h 2009-05-13 09:46:19.000000000 +0200 @@ -184,6 +184,8 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_ struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *); void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *); uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *); +void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t, + uint32_t); void lpfc_reset_barrier(struct lpfc_hba * phba); int lpfc_sli_brdready(struct lpfc_hba *, uint32_t); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_debugfs.c linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_debugfs.c --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_debugfs.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_debugfs.c 2009-05-13 09:46:19.000000000 +0200 @@ -47,7 +47,7 @@ #include "lpfc_debugfs.h" #ifdef CONFIG_SCSI_LPFC_DEBUG_FS -/** +/* * debugfs interface * * To access this interface the user should: @@ -95,7 +95,7 @@ module_param(lpfc_debugfs_max_slow_ring_ MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc, "Set debugfs slow ring trace depth"); -int lpfc_debugfs_mask_disc_trc; +static int lpfc_debugfs_mask_disc_trc; module_param(lpfc_debugfs_mask_disc_trc, int, 0); MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc, "Set debugfs discovery trace mask"); @@ -127,7 +127,7 @@ static atomic_t lpfc_debugfs_seq_trc_cnt static unsigned long lpfc_debugfs_start_time = 0L; /** - * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer. + * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer * @vport: The vport to gather the log info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -187,7 +187,7 @@ lpfc_debugfs_disc_trc_data(struct lpfc_v } /** - * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer. + * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer * @phba: The HBA to gather the log info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -250,7 +250,7 @@ lpfc_debugfs_slow_ring_trc_data(struct l static int lpfc_debugfs_last_hbq = -1; /** - * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer. + * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer * @phba: The HBA to gather host buffer info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -369,7 +369,7 @@ skipit: static int lpfc_debugfs_last_hba_slim_off; /** - * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer. + * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer * @phba: The HBA to gather SLIM info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -399,8 +399,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpf len += snprintf(buf+len, size-len, "HBA SLIM\n"); lpfc_memcpy_from_slim(buffer, - ((uint8_t *)phba->MBslimaddr) + lpfc_debugfs_last_hba_slim_off, - 1024); + phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off, 1024); ptr = (uint32_t *)&buffer[0]; off = lpfc_debugfs_last_hba_slim_off; @@ -426,7 +425,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpf } /** - * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer. + * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer * @phba: The HBA to gather Host SLIM info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -501,7 +500,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lp } /** - * lpfc_debugfs_nodelist_data - Dump target node list to a buffer. + * lpfc_debugfs_nodelist_data - Dump target node list to a buffer * @vport: The vport to gather target node info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -599,7 +598,7 @@ lpfc_debugfs_nodelist_data(struct lpfc_v #endif /** - * lpfc_debugfs_disc_trc - Store discovery trace log. + * lpfc_debugfs_disc_trc - Store discovery trace log * @vport: The vport to associate this trace string with for retrieval. * @mask: Log entry classification. * @fmt: Format string to be displayed when dumping the log. @@ -643,7 +642,7 @@ lpfc_debugfs_disc_trc(struct lpfc_vport } /** - * lpfc_debugfs_slow_ring_trc - Store slow ring trace log. + * lpfc_debugfs_slow_ring_trc - Store slow ring trace log * @phba: The phba to associate this trace string with for retrieval. * @fmt: Format string to be displayed when dumping the log. * @data1: 1st data parameter to be applied to @fmt. @@ -682,7 +681,7 @@ lpfc_debugfs_slow_ring_trc(struct lpfc_h #ifdef CONFIG_SCSI_LPFC_DEBUG_FS /** - * lpfc_debugfs_disc_trc_open - Open the discovery trace log. + * lpfc_debugfs_disc_trc_open - Open the discovery trace log * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -732,7 +731,7 @@ out: } /** - * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log. + * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -782,7 +781,7 @@ out: } /** - * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer. + * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -824,7 +823,7 @@ out: } /** - * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer. + * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -866,7 +865,7 @@ out: } /** - * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer. + * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -993,7 +992,7 @@ lpfc_debugfs_dumpDataDif_write(struct fi /** - * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file. + * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -1035,7 +1034,7 @@ out: } /** - * lpfc_debugfs_lseek - Seek through a debugfs file. + * lpfc_debugfs_lseek - Seek through a debugfs file * @file: The file pointer to seek through. * @off: The offset to seek to or the amount to seek by. * @whence: Indicates how to seek. @@ -1073,7 +1072,7 @@ lpfc_debugfs_lseek(struct file *file, lo } /** - * lpfc_debugfs_read - Read a debugfs file. + * lpfc_debugfs_read - Read a debugfs file * @file: The file pointer to read from. * @buf: The buffer to copy the data to. * @nbytes: The number of bytes to read. @@ -1098,7 +1097,7 @@ lpfc_debugfs_read(struct file *file, cha } /** - * lpfc_debugfs_release - Release the buffer used to store debugfs file data. + * lpfc_debugfs_release - Release the buffer used to store debugfs file data * @inode: The inode pointer that contains a vport pointer. (unused) * @file: The file pointer that contains the buffer to release. * @@ -1210,7 +1209,7 @@ static atomic_t lpfc_debugfs_hba_count; #endif /** - * lpfc_debugfs_initialize - Initialize debugfs for a vport. + * lpfc_debugfs_initialize - Initialize debugfs for a vport * @vport: The vport pointer to initialize. * * Description: @@ -1434,7 +1433,7 @@ debug_failed: } /** - * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport. + * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport * @vport: The vport pointer to remove from debugfs. * * Description: diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_disc.h linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_disc.h --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_disc.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_disc.h 2009-05-13 09:46:19.000000000 +0200 @@ -99,6 +99,7 @@ struct lpfc_nodelist { #define NLP_USG_FREE_ACK_BIT 0x8 /* Indicate ndlp memory free invoked */ struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */ + struct lpfc_hba *phba; struct fc_rport *rport; /* Corresponding FC transport port structure */ struct lpfc_vport *vport; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_els.c linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_els.c --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_els.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_els.c 2009-05-13 09:46:19.000000000 +0200 @@ -55,7 +55,7 @@ static void lpfc_register_new_vport(stru static int lpfc_max_els_tries = 3; /** - * lpfc_els_chk_latt: Check host link attention event for a vport. + * lpfc_els_chk_latt - Check host link attention event for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine checks whether there is an outstanding host link @@ -116,7 +116,7 @@ lpfc_els_chk_latt(struct lpfc_vport *vpo } /** - * lpfc_prep_els_iocb: Allocate and prepare a lpfc iocb data structure. + * lpfc_prep_els_iocb - Allocate and prepare a lpfc iocb data structure * @vport: pointer to a host virtual N_Port data structure. * @expectRsp: flag indicating whether response is expected. * @cmdSize: size of the ELS command. @@ -290,7 +290,7 @@ els_iocb_free_pcmb_exit: } /** - * lpfc_issue_fabric_reglogin: Issue fabric registration login for a vport. + * lpfc_issue_fabric_reglogin - Issue fabric registration login for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues a fabric registration login for a @vport. An @@ -386,7 +386,7 @@ fail: } /** - * lpfc_cmpl_els_flogi_fabric: Completion function for flogi to a fabric port. + * lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @sp: pointer to service parameter data structure. @@ -509,7 +509,7 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_v } /** - * lpfc_cmpl_els_flogi_nport: Completion function for flogi to an N_Port. + * lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @sp: pointer to service parameter data structure. @@ -626,7 +626,7 @@ fail: } /** - * lpfc_cmpl_els_flogi: Completion callback function for flogi. + * lpfc_cmpl_els_flogi - Completion callback function for flogi * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -751,7 +751,7 @@ out: } /** - * lpfc_issue_els_flogi: Issue an flogi iocb command for a vport. + * lpfc_issue_els_flogi - Issue an flogi iocb command for a vport * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -849,7 +849,7 @@ lpfc_issue_els_flogi(struct lpfc_vport * } /** - * lpfc_els_abort_flogi: Abort all outstanding flogi iocbs. + * lpfc_els_abort_flogi - Abort all outstanding flogi iocbs * @phba: pointer to lpfc hba data structure. * * This routine aborts all the outstanding Fabric Login (FLOGI) IOCBs @@ -898,7 +898,7 @@ lpfc_els_abort_flogi(struct lpfc_hba *ph } /** - * lpfc_initial_flogi: Issue an initial fabric login for a vport. + * lpfc_initial_flogi - Issue an initial fabric login for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues an initial Fabric Login (FLOGI) for the @vport @@ -949,7 +949,7 @@ lpfc_initial_flogi(struct lpfc_vport *vp } /** - * lpfc_initial_fdisc: Issue an initial fabric discovery for a vport. + * lpfc_initial_fdisc - Issue an initial fabric discovery for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues an initial Fabric Discover (FDISC) for the @vport @@ -998,7 +998,7 @@ lpfc_initial_fdisc(struct lpfc_vport *vp } /** - * lpfc_more_plogi: Check and issue remaining plogis for a vport. + * lpfc_more_plogi - Check and issue remaining plogis for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine checks whether there are more remaining Port Logins @@ -1031,7 +1031,7 @@ lpfc_more_plogi(struct lpfc_vport *vport } /** - * lpfc_plogi_confirm_nport: Confirm pologi wwpn matches stored ndlp. + * lpfc_plogi_confirm_nport - Confirm pologi wwpn matches stored ndlp * @phba: pointer to lpfc hba data structure. * @prsp: pointer to response IOCB payload. * @ndlp: pointer to a node-list data structure. @@ -1165,7 +1165,7 @@ lpfc_plogi_confirm_nport(struct lpfc_hba } /** - * lpfc_end_rscn: Check and handle more rscn for a vport. + * lpfc_end_rscn - Check and handle more rscn for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine checks whether more Registration State Change @@ -1197,7 +1197,7 @@ lpfc_end_rscn(struct lpfc_vport *vport) } /** - * lpfc_cmpl_els_plogi: Completion callback function for plogi. + * lpfc_cmpl_els_plogi - Completion callback function for plogi * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1322,7 +1322,7 @@ out: } /** - * lpfc_issue_els_plogi: Issue an plogi iocb command for a vport. + * lpfc_issue_els_plogi - Issue an plogi iocb command for a vport * @vport: pointer to a host virtual N_Port data structure. * @did: destination port identifier. * @retry: number of retries to the command IOCB. @@ -1401,7 +1401,7 @@ lpfc_issue_els_plogi(struct lpfc_vport * } /** - * lpfc_cmpl_els_prli: Completion callback function for prli. + * lpfc_cmpl_els_prli - Completion callback function for prli * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1472,7 +1472,7 @@ out: } /** - * lpfc_issue_els_prli: Issue a prli iocb command for a vport. + * lpfc_issue_els_prli - Issue a prli iocb command for a vport * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -1562,7 +1562,7 @@ lpfc_issue_els_prli(struct lpfc_vport *v } /** - * lpfc_rscn_disc: Perform rscn discovery for a vport. + * lpfc_rscn_disc - Perform rscn discovery for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine performs Registration State Change Notification (RSCN) @@ -1588,7 +1588,7 @@ lpfc_rscn_disc(struct lpfc_vport *vport) } /** - * lpfc_adisc_done: Complete the adisc phase of discovery. + * lpfc_adisc_done - Complete the adisc phase of discovery * @vport: pointer to lpfc_vport hba data structure that finished all ADISCs. * * This function is called when the final ADISC is completed during discovery. @@ -1639,7 +1639,7 @@ lpfc_adisc_done(struct lpfc_vport *vport } /** - * lpfc_more_adisc: Issue more adisc as needed. + * lpfc_more_adisc - Issue more adisc as needed * @vport: pointer to a host virtual N_Port data structure. * * This routine determines whether there are more ndlps on a @vport @@ -1672,7 +1672,7 @@ lpfc_more_adisc(struct lpfc_vport *vport } /** - * lpfc_cmpl_els_adisc: Completion callback function for adisc. + * lpfc_cmpl_els_adisc - Completion callback function for adisc * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1760,7 +1760,7 @@ out: } /** - * lpfc_issue_els_adisc: Issue an address discover iocb to an node on a vport. + * lpfc_issue_els_adisc - Issue an address discover iocb to an node on a vport * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -1833,7 +1833,7 @@ lpfc_issue_els_adisc(struct lpfc_vport * } /** - * lpfc_cmpl_els_logo: Completion callback function for logo. + * lpfc_cmpl_els_logo - Completion callback function for logo * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1910,7 +1910,7 @@ out: } /** - * lpfc_issue_els_logo: Issue a logo to an node on a vport. + * lpfc_issue_els_logo - Issue a logo to an node on a vport * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -1991,7 +1991,7 @@ lpfc_issue_els_logo(struct lpfc_vport *v } /** - * lpfc_cmpl_els_cmd: Completion callback function for generic els command. + * lpfc_cmpl_els_cmd - Completion callback function for generic els command * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -2031,7 +2031,7 @@ lpfc_cmpl_els_cmd(struct lpfc_hba *phba, } /** - * lpfc_issue_els_scr: Issue a scr to an node on a vport. + * lpfc_issue_els_scr - Issue a scr to an node on a vport * @vport: pointer to a host virtual N_Port data structure. * @nportid: N_Port identifier to the remote node. * @retry: number of retries to the command IOCB. @@ -2125,7 +2125,7 @@ lpfc_issue_els_scr(struct lpfc_vport *vp } /** - * lpfc_issue_els_farpr: Issue a farp to an node on a vport. + * lpfc_issue_els_farpr - Issue a farp to an node on a vport * @vport: pointer to a host virtual N_Port data structure. * @nportid: N_Port identifier to the remote node. * @retry: number of retries to the command IOCB. @@ -2236,7 +2236,7 @@ lpfc_issue_els_farpr(struct lpfc_vport * } /** - * lpfc_cancel_retry_delay_tmo: Cancel the timer with delayed iocb-cmd retry. + * lpfc_cancel_retry_delay_tmo - Cancel the timer with delayed iocb-cmd retry * @vport: pointer to a host virtual N_Port data structure. * @nlp: pointer to a node-list data structure. * @@ -2291,7 +2291,7 @@ lpfc_cancel_retry_delay_tmo(struct lpfc_ } /** - * lpfc_els_retry_delay: Timer function with a ndlp delayed function timer. + * lpfc_els_retry_delay - Timer function with a ndlp delayed function timer * @ptr: holder for the pointer to the timer function associated data (ndlp). * * This routine is invoked by the ndlp delayed-function timer to check @@ -2333,7 +2333,7 @@ lpfc_els_retry_delay(unsigned long ptr) } /** - * lpfc_els_retry_delay_handler: Work thread handler for ndlp delayed function. + * lpfc_els_retry_delay_handler - Work thread handler for ndlp delayed function * @ndlp: pointer to a node-list data structure. * * This routine is the worker-thread handler for processing the @ndlp delayed @@ -2404,7 +2404,7 @@ lpfc_els_retry_delay_handler(struct lpfc } /** - * lpfc_els_retry: Make retry decision on an els command iocb. + * lpfc_els_retry - Make retry decision on an els command iocb * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -2732,7 +2732,7 @@ lpfc_els_retry(struct lpfc_hba *phba, st } /** - * lpfc_els_free_data: Free lpfc dma buffer and data structure with an iocb. + * lpfc_els_free_data - Free lpfc dma buffer and data structure with an iocb * @phba: pointer to lpfc hba data structure. * @buf_ptr1: pointer to the lpfc DMA buffer data structure. * @@ -2764,7 +2764,7 @@ lpfc_els_free_data(struct lpfc_hba *phba } /** - * lpfc_els_free_bpl: Free lpfc dma buffer and data structure with bpl. + * lpfc_els_free_bpl - Free lpfc dma buffer and data structure with bpl * @phba: pointer to lpfc hba data structure. * @buf_ptr: pointer to the lpfc dma buffer data structure. * @@ -2784,7 +2784,7 @@ lpfc_els_free_bpl(struct lpfc_hba *phba, } /** - * lpfc_els_free_iocb: Free a command iocb and its associated resources. + * lpfc_els_free_iocb - Free a command iocb and its associated resources * @phba: pointer to lpfc hba data structure. * @elsiocb: pointer to lpfc els command iocb data structure. * @@ -2877,7 +2877,7 @@ lpfc_els_free_iocb(struct lpfc_hba *phba } /** - * lpfc_cmpl_els_logo_acc: Completion callback function to logo acc response. + * lpfc_cmpl_els_logo_acc - Completion callback function to logo acc response * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -2931,7 +2931,7 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba * } /** - * lpfc_mbx_cmpl_dflt_rpi: Completion callbk func for unreg dflt rpi mbox cmd. + * lpfc_mbx_cmpl_dflt_rpi - Completion callbk func for unreg dflt rpi mbox cmd * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -2965,7 +2965,7 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba * } /** - * lpfc_cmpl_els_rsp: Completion callback function for els response iocb cmd. + * lpfc_cmpl_els_rsp - Completion callback function for els response iocb cmd * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -3136,7 +3136,7 @@ out: } /** - * lpfc_els_rsp_acc: Prepare and issue an acc response iocb command. + * lpfc_els_rsp_acc - Prepare and issue an acc response iocb command * @vport: pointer to a host virtual N_Port data structure. * @flag: the els command code to be accepted. * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -3275,7 +3275,7 @@ lpfc_els_rsp_acc(struct lpfc_vport *vpor } /** - * lpfc_els_rsp_reject: Propare and issue a rjt response iocb command. + * lpfc_els_rsp_reject - Propare and issue a rjt response iocb command * @vport: pointer to a virtual N_Port data structure. * @rejectError: * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -3356,7 +3356,7 @@ lpfc_els_rsp_reject(struct lpfc_vport *v } /** - * lpfc_els_rsp_adisc_acc: Prepare and issue acc response to adisc iocb cmd. + * lpfc_els_rsp_adisc_acc - Prepare and issue acc response to adisc iocb cmd * @vport: pointer to a virtual N_Port data structure. * @oldiocb: pointer to the original lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -3431,7 +3431,7 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport } /** - * lpfc_els_rsp_prli_acc: Prepare and issue acc response to prli iocb cmd. + * lpfc_els_rsp_prli_acc - Prepare and issue acc response to prli iocb cmd * @vport: pointer to a virtual N_Port data structure. * @oldiocb: pointer to the original lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -3529,7 +3529,7 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport } /** - * lpfc_els_rsp_rnid_acc: Issue rnid acc response iocb command. + * lpfc_els_rsp_rnid_acc - Issue rnid acc response iocb command * @vport: pointer to a virtual N_Port data structure. * @format: rnid command format. * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -3635,7 +3635,7 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport } /** - * lpfc_els_disc_adisc: Issue remaining adisc iocbs to npr nodes of a vport. + * lpfc_els_disc_adisc - Issue remaining adisc iocbs to npr nodes of a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues Address Discover (ADISC) ELS commands to those @@ -3693,7 +3693,7 @@ lpfc_els_disc_adisc(struct lpfc_vport *v } /** - * lpfc_els_disc_plogi: Issue plogi for all npr nodes of a vport before adisc. + * lpfc_els_disc_plogi - Issue plogi for all npr nodes of a vport before adisc * @vport: pointer to a host virtual N_Port data structure. * * This routine issues Port Login (PLOGI) ELS commands to all the N_Ports @@ -3752,7 +3752,7 @@ lpfc_els_disc_plogi(struct lpfc_vport *v } /** - * lpfc_els_flush_rscn: Clean up any rscn activities with a vport. + * lpfc_els_flush_rscn - Clean up any rscn activities with a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine cleans up any Registration State Change Notification @@ -3791,7 +3791,7 @@ lpfc_els_flush_rscn(struct lpfc_vport *v } /** - * lpfc_rscn_payload_check: Check whether there is a pending rscn to a did. + * lpfc_rscn_payload_check - Check whether there is a pending rscn to a did * @vport: pointer to a host virtual N_Port data structure. * @did: remote destination port identifier. * @@ -3866,7 +3866,7 @@ return_did_out: } /** - * lpfc_rscn_recovery_check: Send recovery event to vport nodes matching rscn + * lpfc_rscn_recovery_check - Send recovery event to vport nodes matching rscn * @vport: pointer to a host virtual N_Port data structure. * * This routine sends recovery (NLP_EVT_DEVICE_RECOVERY) event to the @@ -3895,7 +3895,7 @@ lpfc_rscn_recovery_check(struct lpfc_vpo } /** - * lpfc_send_rscn_event: Send an RSCN event to management application. + * lpfc_send_rscn_event - Send an RSCN event to management application * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @@ -3938,7 +3938,7 @@ lpfc_send_rscn_event(struct lpfc_vport * } /** - * lpfc_els_rcv_rscn: Process an unsolicited rscn iocb. + * lpfc_els_rcv_rscn - Process an unsolicited rscn iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4134,7 +4134,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vpo } /** - * lpfc_els_handle_rscn: Handle rscn for a vport. + * lpfc_els_handle_rscn - Handle rscn for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine handles the Registration State Configuration Notification @@ -4222,7 +4222,7 @@ lpfc_els_handle_rscn(struct lpfc_vport * } /** - * lpfc_els_rcv_flogi: Process an unsolicited flogi iocb. + * lpfc_els_rcv_flogi - Process an unsolicited flogi iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4336,7 +4336,7 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vp } /** - * lpfc_els_rcv_rnid: Process an unsolicited rnid iocb. + * lpfc_els_rcv_rnid - Process an unsolicited rnid iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4391,7 +4391,7 @@ lpfc_els_rcv_rnid(struct lpfc_vport *vpo } /** - * lpfc_els_rcv_lirr: Process an unsolicited lirr iocb. + * lpfc_els_rcv_lirr - Process an unsolicited lirr iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4419,7 +4419,7 @@ lpfc_els_rcv_lirr(struct lpfc_vport *vpo } /** - * lpfc_els_rsp_rps_acc: Completion callbk func for MBX_READ_LNK_STAT mbox cmd. + * lpfc_els_rsp_rps_acc - Completion callbk func for MBX_READ_LNK_STAT mbox cmd * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -4513,7 +4513,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *ph } /** - * lpfc_els_rcv_rps: Process an unsolicited rps iocb. + * lpfc_els_rcv_rps - Process an unsolicited rps iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4590,7 +4590,7 @@ reject_out: } /** - * lpfc_els_rsp_rpl_acc: Issue an accept rpl els command. + * lpfc_els_rsp_rpl_acc - Issue an accept rpl els command * @vport: pointer to a host virtual N_Port data structure. * @cmdsize: size of the ELS command. * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -4662,7 +4662,7 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport * } /** - * lpfc_els_rcv_rpl: Process an unsolicited rpl iocb. + * lpfc_els_rcv_rpl - Process an unsolicited rpl iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4721,7 +4721,7 @@ lpfc_els_rcv_rpl(struct lpfc_vport *vpor } /** - * lpfc_els_rcv_farp: Process an unsolicited farp request els command. + * lpfc_els_rcv_farp - Process an unsolicited farp request els command * @vport: pointer to a virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4804,7 +4804,7 @@ lpfc_els_rcv_farp(struct lpfc_vport *vpo } /** - * lpfc_els_rcv_farpr: Process an unsolicited farp response iocb. + * lpfc_els_rcv_farpr - Process an unsolicited farp response iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4842,7 +4842,7 @@ lpfc_els_rcv_farpr(struct lpfc_vport *vp } /** - * lpfc_els_rcv_fan: Process an unsolicited fan iocb command. + * lpfc_els_rcv_fan - Process an unsolicited fan iocb command * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @fan_ndlp: pointer to a node-list data structure. @@ -4890,7 +4890,7 @@ lpfc_els_rcv_fan(struct lpfc_vport *vpor } /** - * lpfc_els_timeout: Handler funciton to the els timer. + * lpfc_els_timeout - Handler funciton to the els timer * @ptr: holder for the timer function associated data. * * This routine is invoked by the ELS timer after timeout. It posts the ELS @@ -4919,7 +4919,7 @@ lpfc_els_timeout(unsigned long ptr) } /** - * lpfc_els_timeout_handler: Process an els timeout event. + * lpfc_els_timeout_handler - Process an els timeout event * @vport: pointer to a virtual N_Port data structure. * * This routine is the actual handler function that processes an ELS timeout @@ -4994,7 +4994,7 @@ lpfc_els_timeout_handler(struct lpfc_vpo } /** - * lpfc_els_flush_cmd: Clean up the outstanding els commands to a vport. + * lpfc_els_flush_cmd - Clean up the outstanding els commands to a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine is used to clean up all the outstanding ELS commands on a @@ -5058,25 +5058,15 @@ lpfc_els_flush_cmd(struct lpfc_vport *vp } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &piocb->iocb; - list_del_init(&piocb->list); - - if (!piocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, piocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } - } + /* Cancell all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); return; } /** - * lpfc_els_flush_all_cmd: Clean up all the outstanding els commands to a HBA. + * lpfc_els_flush_all_cmd - Clean up all the outstanding els commands to a HBA * @phba: pointer to lpfc hba data structure. * * This routine is used to clean up all the outstanding ELS commands on a @@ -5121,23 +5111,16 @@ lpfc_els_flush_all_cmd(struct lpfc_hba lpfc_sli_issue_abort_iotag(phba, pring, piocb); } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &piocb->iocb; - list_del_init(&piocb->list); - if (!piocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, piocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } - } + + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); + return; } /** - * lpfc_send_els_failure_event: Posts an ELS command failure event. + * lpfc_send_els_failure_event - Posts an ELS command failure event * @phba: Pointer to hba context object. * @cmdiocbp: Pointer to command iocb which reported error. * @rspiocbp: Pointer to response iocb which reported error. @@ -5204,7 +5187,7 @@ lpfc_send_els_failure_event(struct lpfc_ } /** - * lpfc_send_els_event: Posts unsolicited els event. + * lpfc_send_els_event - Posts unsolicited els event * @vport: Pointer to vport object. * @ndlp: Pointer FC node object. * @cmd: ELS command code. @@ -5284,7 +5267,7 @@ lpfc_send_els_event(struct lpfc_vport *v /** - * lpfc_els_unsol_buffer: Process an unsolicited event data buffer. + * lpfc_els_unsol_buffer - Process an unsolicited event data buffer * @phba: pointer to lpfc hba data structure. * @pring: pointer to a SLI ring. * @vport: pointer to a host virtual N_Port data structure. @@ -5592,7 +5575,7 @@ dropit: } /** - * lpfc_find_vport_by_vpid: Find a vport on a HBA through vport identifier. + * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier * @phba: pointer to lpfc hba data structure. * @vpi: host virtual N_Port identifier. * @@ -5622,7 +5605,7 @@ lpfc_find_vport_by_vpid(struct lpfc_hba } /** - * lpfc_els_unsol_event: Process an unsolicited event from an els sli ring. + * lpfc_els_unsol_event - Process an unsolicited event from an els sli ring * @phba: pointer to lpfc hba data structure. * @pring: pointer to a SLI ring. * @elsiocb: pointer to lpfc els iocb data structure. @@ -5710,7 +5693,7 @@ lpfc_els_unsol_event(struct lpfc_hba *ph } /** - * lpfc_do_scr_ns_plogi: Issue a plogi to the name server for scr. + * lpfc_do_scr_ns_plogi - Issue a plogi to the name server for scr * @phba: pointer to lpfc hba data structure. * @vport: pointer to a virtual N_Port data structure. * @@ -5781,7 +5764,7 @@ lpfc_do_scr_ns_plogi(struct lpfc_hba *ph } /** - * lpfc_cmpl_reg_new_vport: Completion callback function to register new vport. + * lpfc_cmpl_reg_new_vport - Completion callback function to register new vport * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -5850,7 +5833,7 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba } /** - * lpfc_register_new_vport: Register a new vport with a HBA. + * lpfc_register_new_vport - Register a new vport with a HBA * @phba: pointer to lpfc hba data structure. * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. @@ -5899,7 +5882,7 @@ mbox_err_exit: } /** - * lpfc_cmpl_els_fdisc: Completion function for fdisc iocb command. + * lpfc_cmpl_els_fdisc - Completion function for fdisc iocb command * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -6007,7 +5990,7 @@ out: } /** - * lpfc_issue_els_fdisc: Issue a fdisc iocb command. + * lpfc_issue_els_fdisc - Issue a fdisc iocb command * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -6101,7 +6084,7 @@ lpfc_issue_els_fdisc(struct lpfc_vport * } /** - * lpfc_cmpl_els_npiv_logo: Completion function with vport logo. + * lpfc_cmpl_els_npiv_logo - Completion function with vport logo * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -6136,7 +6119,7 @@ lpfc_cmpl_els_npiv_logo(struct lpfc_hba } /** - * lpfc_issue_els_npiv_logo: Issue a logo off a vport. + * lpfc_issue_els_npiv_logo - Issue a logo off a vport * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @@ -6197,7 +6180,7 @@ lpfc_issue_els_npiv_logo(struct lpfc_vpo } /** - * lpfc_fabric_block_timeout: Handler function to the fabric block timer. + * lpfc_fabric_block_timeout - Handler function to the fabric block timer * @ptr: holder for the timer function associated data. * * This routine is invoked by the fabric iocb block timer after @@ -6226,7 +6209,7 @@ lpfc_fabric_block_timeout(unsigned long } /** - * lpfc_resume_fabric_iocbs: Issue a fabric iocb from driver internal list. + * lpfc_resume_fabric_iocbs - Issue a fabric iocb from driver internal list * @phba: pointer to lpfc hba data structure. * * This routine issues one fabric iocb from the driver internal list to @@ -6285,7 +6268,7 @@ repeat: } /** - * lpfc_unblock_fabric_iocbs: Unblock issuing fabric iocb command. + * lpfc_unblock_fabric_iocbs - Unblock issuing fabric iocb command * @phba: pointer to lpfc hba data structure. * * This routine unblocks the issuing fabric iocb command. The function @@ -6303,7 +6286,7 @@ lpfc_unblock_fabric_iocbs(struct lpfc_hb } /** - * lpfc_block_fabric_iocbs: Block issuing fabric iocb command. + * lpfc_block_fabric_iocbs - Block issuing fabric iocb command * @phba: pointer to lpfc hba data structure. * * This routine blocks the issuing fabric iocb for a specified amount of @@ -6325,7 +6308,7 @@ lpfc_block_fabric_iocbs(struct lpfc_hba } /** - * lpfc_cmpl_fabric_iocb: Completion callback function for fabric iocb. + * lpfc_cmpl_fabric_iocb - Completion callback function for fabric iocb * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -6384,7 +6367,7 @@ lpfc_cmpl_fabric_iocb(struct lpfc_hba *p } /** - * lpfc_issue_fabric_iocb: Issue a fabric iocb command. + * lpfc_issue_fabric_iocb - Issue a fabric iocb command * @phba: pointer to lpfc hba data structure. * @iocb: pointer to lpfc command iocb data structure. * @@ -6453,7 +6436,7 @@ lpfc_issue_fabric_iocb(struct lpfc_hba * } /** - * lpfc_fabric_abort_vport: Abort a vport's iocbs from driver fabric iocb list. + * lpfc_fabric_abort_vport - Abort a vport's iocbs from driver fabric iocb list * @vport: pointer to a virtual N_Port data structure. * * This routine aborts all the IOCBs associated with a @vport from the @@ -6468,7 +6451,6 @@ static void lpfc_fabric_abort_vport(stru LIST_HEAD(completions); struct lpfc_hba *phba = vport->phba; struct lpfc_iocbq *tmp_iocb, *piocb; - IOCB_t *cmd; spin_lock_irq(&phba->hbalock); list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list, @@ -6481,19 +6463,13 @@ static void lpfc_fabric_abort_vport(stru } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&piocb->list); - - cmd = &piocb->iocb; - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } /** - * lpfc_fabric_abort_nport: Abort a ndlp's iocbs from driver fabric iocb list. + * lpfc_fabric_abort_nport - Abort a ndlp's iocbs from driver fabric iocb list * @ndlp: pointer to a node-list data structure. * * This routine aborts all the IOCBs associated with an @ndlp from the @@ -6506,10 +6482,9 @@ static void lpfc_fabric_abort_vport(stru void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp) { LIST_HEAD(completions); - struct lpfc_hba *phba = ndlp->vport->phba; + struct lpfc_hba *phba = ndlp->phba; struct lpfc_iocbq *tmp_iocb, *piocb; struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING]; - IOCB_t *cmd; spin_lock_irq(&phba->hbalock); list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list, @@ -6521,19 +6496,13 @@ void lpfc_fabric_abort_nport(struct lpfc } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&piocb->list); - - cmd = &piocb->iocb; - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } /** - * lpfc_fabric_abort_hba: Abort all iocbs on driver fabric iocb list. + * lpfc_fabric_abort_hba - Abort all iocbs on driver fabric iocb list * @phba: pointer to lpfc hba data structure. * * This routine aborts all the IOCBs currently on the driver internal @@ -6546,20 +6515,12 @@ void lpfc_fabric_abort_nport(struct lpfc void lpfc_fabric_abort_hba(struct lpfc_hba *phba) { LIST_HEAD(completions); - struct lpfc_iocbq *piocb; - IOCB_t *cmd; spin_lock_irq(&phba->hbalock); list_splice_init(&phba->fabric_iocb_list, &completions); spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&piocb->list); - - cmd = &piocb->iocb; - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc.h linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc.h --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc.h 2009-05-13 09:46:19.000000000 +0200 @@ -443,6 +443,7 @@ struct lpfc_hba { uint32_t hba_flag; /* hba generic flags */ #define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */ +#define DEFER_ERATT 0x4 /* Deferred error attention in progress */ struct lpfc_dmabuf slim2p; MAILBOX_t *mbox; @@ -723,4 +724,3 @@ lpfc_sli_read_hs(struct lpfc_hba *phba) return; } - diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_hbadisc.c linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_hbadisc.c --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_hbadisc.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_hbadisc.c 2009-05-13 09:46:19.000000000 +0200 @@ -78,7 +78,7 @@ lpfc_terminate_rport_io(struct fc_rport return; } - phba = ndlp->vport->phba; + phba = ndlp->phba; lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT, "rport terminate: sid:x%x did:x%x flg:x%x", @@ -276,7 +276,7 @@ lpfc_dev_loss_tmo_handler(struct lpfc_no } /** - * lpfc_alloc_fast_evt: Allocates data structure for posting event. + * lpfc_alloc_fast_evt - Allocates data structure for posting event * @phba: Pointer to hba context object. * * This function is called from the functions which need to post @@ -303,7 +303,7 @@ lpfc_alloc_fast_evt(struct lpfc_hba *phb } /** - * lpfc_free_fast_evt: Frees event data structure. + * lpfc_free_fast_evt - Frees event data structure * @phba: Pointer to hba context object. * @evt: Event object which need to be freed. * @@ -319,7 +319,7 @@ lpfc_free_fast_evt(struct lpfc_hba *phba } /** - * lpfc_send_fastpath_evt: Posts events generated from fast path. + * lpfc_send_fastpath_evt - Posts events generated from fast path * @phba: Pointer to hba context object. * @evtp: Event data structure. * @@ -1858,13 +1858,18 @@ lpfc_disable_node(struct lpfc_vport *vpo NLP_STE_UNUSED_NODE); } /** - * lpfc_initialize_node: Initialize all fields of node object. + * lpfc_initialize_node - Initialize all fields of node object * @vport: Pointer to Virtual Port object. * @ndlp: Pointer to FC node object. * @did: FC_ID of the node. - * This function is always called when node object need to - * be initialized. It initializes all the fields of the node - * object. + * + * This function is always called when node object need to be initialized. + * It initializes all the fields of the node object. Although the reference + * to phba from @ndlp can be obtained indirectly through it's reference to + * @vport, a direct reference to phba is taken here by @ndlp. This is due + * to the life-span of the @ndlp might go beyond the existence of @vport as + * the final release of ndlp is determined by its reference count. And, the + * operation on @ndlp needs the reference to phba. **/ static inline void lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, @@ -1877,6 +1882,7 @@ lpfc_initialize_node(struct lpfc_vport * ndlp->nlp_delayfunc.data = (unsigned long)ndlp; ndlp->nlp_DID = did; ndlp->vport = vport; + ndlp->phba = vport->phba; ndlp->nlp_sid = NLP_NO_SID; kref_init(&ndlp->kref); NLP_INT_NODE_ACT(ndlp); @@ -2086,7 +2092,6 @@ lpfc_no_rpi(struct lpfc_hba *phba, struc struct lpfc_sli *psli; struct lpfc_sli_ring *pring; struct lpfc_iocbq *iocb, *next_iocb; - IOCB_t *icmd; uint32_t rpi, i; lpfc_fabric_abort_nport(ndlp); @@ -2122,19 +2127,9 @@ lpfc_no_rpi(struct lpfc_hba *phba, struc } } - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - icmd = &iocb->iocb; - icmd->ulpStatus = IOSTAT_LOCAL_REJECT; - icmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl)(phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); return 0; } @@ -2186,9 +2181,13 @@ lpfc_unreg_all_rpis(struct lpfc_vport *v mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->context1 = NULL; rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); - if (rc == MBX_NOT_FINISHED) { + if (rc != MBX_TIMEOUT) mempool_free(mbox, phba->mbox_mem_pool); - } + + if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) + lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, + "1836 Could not issue " + "unreg_login(all_rpis) status %d\n", rc); } } @@ -2206,12 +2205,14 @@ lpfc_unreg_default_rpis(struct lpfc_vpor mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->context1 = NULL; rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); - if (rc == MBX_NOT_FINISHED) { + if (rc != MBX_TIMEOUT) + mempool_free(mbox, phba->mbox_mem_pool); + + if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, "1815 Could not issue " - "unreg_did (default rpis)\n"); - mempool_free(mbox, phba->mbox_mem_pool); - } + "unreg_did (default rpis) status %d\n", + rc); } } @@ -2470,14 +2471,13 @@ lpfc_setup_disc_node(struct lpfc_vport * if (ndlp->nlp_flag & NLP_RCV_PLOGI) return NULL; - spin_lock_irq(shost->host_lock); - ndlp->nlp_flag |= NLP_NPR_2B_DISC; - spin_unlock_irq(shost->host_lock); - /* Since this node is marked for discovery, * delay timeout is not needed. */ lpfc_cancel_retry_delay_tmo(vport, ndlp); + spin_lock_irq(shost->host_lock); + ndlp->nlp_flag |= NLP_NPR_2B_DISC; + spin_unlock_irq(shost->host_lock); } else ndlp = NULL; } else { @@ -2740,19 +2740,9 @@ lpfc_free_tx(struct lpfc_hba *phba, stru } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - icmd = &iocb->iocb; - icmd->ulpStatus = IOSTAT_LOCAL_REJECT; - icmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } static void @@ -3173,7 +3163,7 @@ lpfc_nlp_release(struct kref *kref) lpfc_nlp_remove(ndlp->vport, ndlp); /* clear the ndlp active flag for all release cases */ - phba = ndlp->vport->phba; + phba = ndlp->phba; spin_lock_irqsave(&phba->ndlp_lock, flags); NLP_CLR_NODE_ACT(ndlp); spin_unlock_irqrestore(&phba->ndlp_lock, flags); @@ -3181,7 +3171,7 @@ lpfc_nlp_release(struct kref *kref) /* free ndlp memory for final ndlp release */ if (NLP_CHK_FREE_REQ(ndlp)) { kfree(ndlp->lat_data); - mempool_free(ndlp, ndlp->vport->phba->nlp_mem_pool); + mempool_free(ndlp, ndlp->phba->nlp_mem_pool); } } @@ -3204,7 +3194,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp) * ndlp reference count that is in the process of being * released. */ - phba = ndlp->vport->phba; + phba = ndlp->phba; spin_lock_irqsave(&phba->ndlp_lock, flags); if (!NLP_CHK_NODE_ACT(ndlp) || NLP_CHK_FREE_ACK(ndlp)) { spin_unlock_irqrestore(&phba->ndlp_lock, flags); @@ -3240,7 +3230,7 @@ lpfc_nlp_put(struct lpfc_nodelist *ndlp) "node put: did:x%x flg:x%x refcnt:x%x", ndlp->nlp_DID, ndlp->nlp_flag, atomic_read(&ndlp->kref.refcount)); - phba = ndlp->vport->phba; + phba = ndlp->phba; spin_lock_irqsave(&phba->ndlp_lock, flags); /* Check the ndlp memory free acknowledge flag to avoid the * possible race condition that kref_put got invoked again diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_init.c linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_init.c --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_init.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_init.c 2009-05-13 09:46:19.000000000 +0200 @@ -60,7 +60,7 @@ static struct scsi_transport_template *l static DEFINE_IDR(lpfc_hba_index); /** - * lpfc_config_port_prep: Perform lpfc initialization prior to config port. + * lpfc_config_port_prep - Perform lpfc initialization prior to config port * @phba: pointer to lpfc hba data structure. * * This routine will do LPFC initialization prior to issuing the CONFIG_PORT @@ -221,7 +221,7 @@ out_free_mbox: } /** - * lpfc_config_async_cmpl: Completion handler for config async event mbox cmd. + * lpfc_config_async_cmpl - Completion handler for config async event mbox cmd * @phba: pointer to lpfc hba data structure. * @pmboxq: pointer to the driver internal queue element for mailbox command. * @@ -242,8 +242,7 @@ lpfc_config_async_cmpl(struct lpfc_hba * } /** - * lpfc_dump_wakeup_param_cmpl: Completion handler for dump memory mailbox - * command used for getting wake up parameters. + * lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler * @phba: pointer to lpfc hba data structure. * @pmboxq: pointer to the driver internal queue element for mailbox command. * @@ -287,7 +286,7 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_ } /** - * lpfc_config_port_post: Perform lpfc initialization after config port. + * lpfc_config_port_post - Perform lpfc initialization after config port * @phba: pointer to lpfc hba data structure. * * This routine will do LPFC initialization after the CONFIG_PORT mailbox @@ -303,6 +302,7 @@ int lpfc_config_port_post(struct lpfc_hba *phba) { struct lpfc_vport *vport = phba->pport; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); LPFC_MBOXQ_t *pmb; MAILBOX_t *mb; struct lpfc_dmabuf *mp; @@ -360,6 +360,11 @@ lpfc_config_port_post(struct lpfc_hba *p sizeof (struct lpfc_name)); memcpy(&vport->fc_portname, &vport->fc_sparam.portName, sizeof (struct lpfc_name)); + + /* Update the fc_host data structures with new wwn. */ + fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn); + fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn); + /* If no serial number in VPD data, use low 6 bytes of WWNN */ /* This should be consolidated into parse_vpd ? - mr */ if (phba->SerialNumber[0] == 0) { @@ -551,7 +556,7 @@ lpfc_config_port_post(struct lpfc_hba *p } /** - * lpfc_hba_down_prep: Perform lpfc uninitialization prior to HBA reset. + * lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset * @phba: pointer to lpfc HBA data structure. * * This routine will do LPFC uninitialization before the HBA is reset when @@ -583,7 +588,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba } /** - * lpfc_hba_down_post: Perform lpfc uninitialization after HBA reset. + * lpfc_hba_down_post - Perform lpfc uninitialization after HBA reset * @phba: pointer to lpfc HBA data structure. * * This routine will do uninitialization after the HBA is reset when bring @@ -599,8 +604,6 @@ lpfc_hba_down_post(struct lpfc_hba *phba struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; struct lpfc_dmabuf *mp, *next_mp; - struct lpfc_iocbq *iocb; - IOCB_t *cmd = NULL; LIST_HEAD(completions); int i; @@ -628,20 +631,9 @@ lpfc_hba_down_post(struct lpfc_hba *phba pring->txcmplq_cnt = 0; spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, - list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); lpfc_sli_abort_iocb_ring(phba, pring); spin_lock_irq(&phba->hbalock); @@ -652,7 +644,7 @@ lpfc_hba_down_post(struct lpfc_hba *phba } /** - * lpfc_hb_timeout: The HBA-timer timeout handler. + * lpfc_hb_timeout - The HBA-timer timeout handler * @ptr: unsigned long holds the pointer to lpfc hba data structure. * * This is the HBA-timer timeout handler registered to the lpfc driver. When @@ -686,7 +678,7 @@ lpfc_hb_timeout(unsigned long ptr) } /** - * lpfc_hb_mbox_cmpl: The lpfc heart-beat mailbox command callback function. + * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function * @phba: pointer to lpfc hba data structure. * @pmboxq: pointer to the driver internal queue element for mailbox command. * @@ -721,7 +713,7 @@ lpfc_hb_mbox_cmpl(struct lpfc_hba * phba } /** - * lpfc_hb_timeout_handler: The HBA-timer timeout handler. + * lpfc_hb_timeout_handler - The HBA-timer timeout handler * @phba: pointer to lpfc hba data structure. * * This is the actual HBA-timer timeout handler to be invoked by the worker @@ -830,7 +822,7 @@ lpfc_hb_timeout_handler(struct lpfc_hba } /** - * lpfc_offline_eratt: Bring lpfc offline on hardware error attention. + * lpfc_offline_eratt - Bring lpfc offline on hardware error attention * @phba: pointer to lpfc hba data structure. * * This routine is called to bring the HBA offline when HBA hardware error @@ -857,7 +849,73 @@ lpfc_offline_eratt(struct lpfc_hba *phba } /** - * lpfc_handle_eratt: The HBA hardware error handler. + * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to handle the deferred HBA hardware error + * conditions. This type of error is indicated by HBA by setting ER1 + * and another ER bit in the host status register. The driver will + * wait until the ER1 bit clears before handling the error condition. + **/ +static void +lpfc_handle_deferred_eratt(struct lpfc_hba *phba) +{ + uint32_t old_host_status = phba->work_hs; + struct lpfc_sli_ring *pring; + struct lpfc_sli *psli = &phba->sli; + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0479 Deferred Adapter Hardware Error " + "Data: x%x x%x x%x\n", + phba->work_hs, + phba->work_status[0], phba->work_status[1]); + + spin_lock_irq(&phba->hbalock); + psli->sli_flag &= ~LPFC_SLI2_ACTIVE; + spin_unlock_irq(&phba->hbalock); + + + /* + * Firmware stops when it triggred erratt. That could cause the I/Os + * dropped by the firmware. Error iocb (I/O) on txcmplq and let the + * SCSI layer retry it after re-establishing link. + */ + pring = &psli->ring[psli->fcp_ring]; + lpfc_sli_abort_iocb_ring(phba, pring); + + /* + * There was a firmware error. Take the hba offline and then + * attempt to restart it. + */ + lpfc_offline_prep(phba); + lpfc_offline(phba); + + /* Wait for the ER1 bit to clear.*/ + while (phba->work_hs & HS_FFER1) { + msleep(100); + phba->work_hs = readl(phba->HSregaddr); + /* If driver is unloading let the worker thread continue */ + if (phba->pport->load_flag & FC_UNLOADING) { + phba->work_hs = 0; + break; + } + } + + /* + * This is to ptrotect against a race condition in which + * first write to the host attention register clear the + * host status register. + */ + if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING))) + phba->work_hs = old_host_status & ~HS_FFER1; + + phba->hba_flag &= ~DEFER_ERATT; + phba->work_status[0] = readl(phba->MBslimaddr + 0xa8); + phba->work_status[1] = readl(phba->MBslimaddr + 0xac); +} + +/** + * lpfc_handle_eratt - The HBA hardware error handler * @phba: pointer to lpfc hba data structure. * * This routine is invoked to handle the following HBA hardware error @@ -895,6 +953,9 @@ lpfc_handle_eratt(struct lpfc_hba *phba) (char *) &board_event, LPFC_NL_VENDOR_ID); + if (phba->hba_flag & DEFER_ERATT) + lpfc_handle_deferred_eratt(phba); + if (phba->work_hs & HS_FFER6) { /* Re-establishing Link */ lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, @@ -976,7 +1037,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba) } /** - * lpfc_handle_latt: The HBA link event handler. + * lpfc_handle_latt - The HBA link event handler * @phba: pointer to lpfc hba data structure. * * This routine is invoked from the worker thread to handle a HBA host @@ -1063,7 +1124,7 @@ lpfc_handle_latt_err_exit: } /** - * lpfc_parse_vpd: Parse VPD (Vital Product Data). + * lpfc_parse_vpd - Parse VPD (Vital Product Data) * @phba: pointer to lpfc hba data structure. * @vpd: pointer to the vital product data. * @len: length of the vital product data in bytes. @@ -1213,7 +1274,7 @@ lpfc_parse_vpd(struct lpfc_hba *phba, ui } /** - * lpfc_get_hba_model_desc: Retrieve HBA device model name and description. + * lpfc_get_hba_model_desc - Retrieve HBA device model name and description * @phba: pointer to lpfc hba data structure. * @mdp: pointer to the data structure to hold the derived model name. * @descp: pointer to the data structure to hold the derived description. @@ -1322,7 +1383,8 @@ lpfc_get_hba_model_desc(struct lpfc_hba m = (typeof(m)){"LPe11000", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_ZEPHYR_DCSP: - m = (typeof(m)){"LPe11002-SP", max_speed, "PCIe"}; + m = (typeof(m)){"LP2105", max_speed, "PCIe"}; + GE = 1; break; case PCI_DEVICE_ID_ZMID: m = (typeof(m)){"LPe1150", max_speed, "PCIe"}; @@ -1392,7 +1454,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba } /** - * lpfc_post_buffer: Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring. + * lpfc_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring * @phba: pointer to lpfc hba data structure. * @pring: pointer to a IOCB ring. * @cnt: the number of IOCBs to be posted to the IOCB ring. @@ -1493,7 +1555,7 @@ lpfc_post_buffer(struct lpfc_hba *phba, } /** - * lpfc_post_rcv_buf: Post the initial receive IOCB buffers to ELS ring. + * lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring * @phba: pointer to lpfc hba data structure. * * This routine posts initial receive IOCB buffers to the ELS ring. The @@ -1518,7 +1580,7 @@ lpfc_post_rcv_buf(struct lpfc_hba *phba) #define S(N,V) (((V)<<(N))|((V)>>(32-(N)))) /** - * lpfc_sha_init: Set up initial array of hash table entries. + * lpfc_sha_init - Set up initial array of hash table entries * @HashResultPointer: pointer to an array as hash table. * * This routine sets up the initial values to the array of hash table entries @@ -1535,7 +1597,7 @@ lpfc_sha_init(uint32_t * HashResultPoint } /** - * lpfc_sha_iterate: Iterate initial hash table with the working hash table. + * lpfc_sha_iterate - Iterate initial hash table with the working hash table * @HashResultPointer: pointer to an initial/result hash table. * @HashWorkingPointer: pointer to an working hash table. * @@ -1592,7 +1654,7 @@ lpfc_sha_iterate(uint32_t * HashResultPo } /** - * lpfc_challenge_key: Create challenge key based on WWPN of the HBA. + * lpfc_challenge_key - Create challenge key based on WWPN of the HBA * @RandomChallenge: pointer to the entry of host challenge random number array. * @HashWorking: pointer to the entry of the working hash array. * @@ -1608,7 +1670,7 @@ lpfc_challenge_key(uint32_t * RandomChal } /** - * lpfc_hba_init: Perform special handling for LC HBA initialization. + * lpfc_hba_init - Perform special handling for LC HBA initialization * @phba: pointer to lpfc hba data structure. * @hbainit: pointer to an array of unsigned 32-bit integers. * @@ -1637,7 +1699,7 @@ lpfc_hba_init(struct lpfc_hba *phba, uin } /** - * lpfc_cleanup: Performs vport cleanups before deleting a vport. + * lpfc_cleanup - Performs vport cleanups before deleting a vport * @vport: pointer to a virtual N_Port data structure. * * This routine performs the necessary cleanups before deleting the @vport. @@ -1724,7 +1786,7 @@ lpfc_cleanup(struct lpfc_vport *vport) } /** - * lpfc_stop_vport_timers: Stop all the timers associated with a vport. + * lpfc_stop_vport_timers - Stop all the timers associated with a vport * @vport: pointer to a virtual N_Port data structure. * * This routine stops all the timers associated with a @vport. This function @@ -1741,7 +1803,7 @@ lpfc_stop_vport_timers(struct lpfc_vport } /** - * lpfc_stop_phba_timers: Stop all the timers associated with an HBA. + * lpfc_stop_phba_timers - Stop all the timers associated with an HBA * @phba: pointer to lpfc hba data structure. * * This routine stops all the timers associated with a HBA. This function is @@ -1761,7 +1823,7 @@ lpfc_stop_phba_timers(struct lpfc_hba *p } /** - * lpfc_block_mgmt_io: Mark a HBA's management interface as blocked. + * lpfc_block_mgmt_io - Mark a HBA's management interface as blocked * @phba: pointer to lpfc hba data structure. * * This routine marks a HBA's management interface as blocked. Once the HBA's @@ -1781,7 +1843,7 @@ lpfc_block_mgmt_io(struct lpfc_hba * phb } /** - * lpfc_online: Initialize and bring a HBA online. + * lpfc_online - Initialize and bring a HBA online * @phba: pointer to lpfc hba data structure. * * This routine initializes the HBA and brings a HBA online. During this @@ -1839,7 +1901,7 @@ lpfc_online(struct lpfc_hba *phba) } /** - * lpfc_unblock_mgmt_io: Mark a HBA's management interface to be not blocked. + * lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked * @phba: pointer to lpfc hba data structure. * * This routine marks a HBA's management interface as not blocked. Once the @@ -1860,7 +1922,7 @@ lpfc_unblock_mgmt_io(struct lpfc_hba * p } /** - * lpfc_offline_prep: Prepare a HBA to be brought offline. + * lpfc_offline_prep - Prepare a HBA to be brought offline * @phba: pointer to lpfc hba data structure. * * This routine is invoked to prepare a HBA to be brought offline. It performs @@ -1917,7 +1979,7 @@ lpfc_offline_prep(struct lpfc_hba * phba } /** - * lpfc_offline: Bring a HBA offline. + * lpfc_offline - Bring a HBA offline * @phba: pointer to lpfc hba data structure. * * This routine actually brings a HBA offline. It stops all the timers @@ -1962,7 +2024,7 @@ lpfc_offline(struct lpfc_hba *phba) } /** - * lpfc_scsi_free: Free all the SCSI buffers and IOCBs from driver lists. + * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists * @phba: pointer to lpfc hba data structure. * * This routine is to free all the SCSI buffers and IOCBs from the driver @@ -2001,7 +2063,7 @@ lpfc_scsi_free(struct lpfc_hba *phba) } /** - * lpfc_create_port: Create an FC port. + * lpfc_create_port - Create an FC port * @phba: pointer to lpfc hba data structure. * @instance: a unique integer ID to this FC port. * @dev: pointer to the device data structure. @@ -2091,7 +2153,7 @@ out: } /** - * destroy_port: Destroy an FC port. + * destroy_port - destroy an FC port * @vport: pointer to an lpfc virtual N_Port data structure. * * This routine destroys a FC port from the upper layer protocol. All the @@ -2116,7 +2178,7 @@ destroy_port(struct lpfc_vport *vport) } /** - * lpfc_get_instance: Get a unique integer ID. + * lpfc_get_instance - Get a unique integer ID * * This routine allocates a unique integer ID from lpfc_hba_index pool. It * uses the kernel idr facility to perform the task. @@ -2139,7 +2201,7 @@ lpfc_get_instance(void) } /** - * lpfc_scan_finished: method for SCSI layer to detect whether scan is done. + * lpfc_scan_finished - method for SCSI layer to detect whether scan is done * @shost: pointer to SCSI host data structure. * @time: elapsed time of the scan in jiffies. * @@ -2197,7 +2259,7 @@ finished: } /** - * lpfc_host_attrib_init: Initialize SCSI host attributes on a FC port. + * lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port * @shost: pointer to SCSI host data structure. * * This routine initializes a given SCSI host attributes on a FC port. The @@ -2252,7 +2314,7 @@ void lpfc_host_attrib_init(struct Scsi_H } /** - * lpfc_enable_msix: Enable MSI-X interrupt mode. + * lpfc_enable_msix - Enable MSI-X interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to enable the MSI-X interrupt vectors. The kernel @@ -2366,7 +2428,7 @@ msi_fail_out: } /** - * lpfc_disable_msix: Disable MSI-X interrupt mode. + * lpfc_disable_msix - Disable MSI-X interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to release the MSI-X vectors and then disable the @@ -2385,7 +2447,7 @@ lpfc_disable_msix(struct lpfc_hba *phba) } /** - * lpfc_enable_msi: Enable MSI interrupt mode. + * lpfc_enable_msi - Enable MSI interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to enable the MSI interrupt mode. The kernel @@ -2423,7 +2485,7 @@ lpfc_enable_msi(struct lpfc_hba *phba) } /** - * lpfc_disable_msi: Disable MSI interrupt mode. + * lpfc_disable_msi - Disable MSI interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to disable the MSI interrupt mode. The driver @@ -2441,7 +2503,7 @@ lpfc_disable_msi(struct lpfc_hba *phba) } /** - * lpfc_log_intr_mode: Log the active interrupt mode + * lpfc_log_intr_mode - Log the active interrupt mode * @phba: pointer to lpfc hba data structure. * @intr_mode: active interrupt mode adopted. * @@ -2490,7 +2552,7 @@ lpfc_stop_port(struct lpfc_hba *phba) } /** - * lpfc_enable_intr: Enable device interrupt. + * lpfc_enable_intr - Enable device interrupt * @phba: pointer to lpfc hba data structure. * * This routine is invoked to enable device interrupt and associate driver's @@ -2547,7 +2609,7 @@ lpfc_enable_intr(struct lpfc_hba *phba, } /** - * lpfc_disable_intr: Disable device interrupt. + * lpfc_disable_intr - Disable device interrupt * @phba: pointer to lpfc hba data structure. * * This routine is invoked to disable device interrupt and disassociate the @@ -2574,7 +2636,7 @@ lpfc_disable_intr(struct lpfc_hba *phba) } /** - * lpfc_pci_probe_one: lpfc PCI probe func to register device to PCI subsystem. + * lpfc_pci_probe_one - lpfc PCI probe func to register device to PCI subsystem * @pdev: pointer to PCI device * @pid: pointer to PCI device identifier * @@ -3010,7 +3072,7 @@ out: } /** - * lpfc_pci_remove_one: lpfc PCI func to unregister device from PCI subsystem. + * lpfc_pci_remove_one - lpfc PCI func to unregister device from PCI subsystem * @pdev: pointer to PCI device * * This routine is to be registered to the kernel's PCI subsystem. When an @@ -3033,8 +3095,6 @@ lpfc_pci_remove_one(struct pci_dev *pdev lpfc_free_sysfs_attr(vport); - kthread_stop(phba->worker_thread); - /* Release all the vports against this physical port */ vports = lpfc_create_vport_work_array(phba); if (vports != NULL) @@ -3052,7 +3112,12 @@ lpfc_pci_remove_one(struct pci_dev *pdev * clears the rings, discards all mailbox commands, and resets * the HBA. */ + + /* HBA interrupt will be diabled after this call */ lpfc_sli_hba_down(phba); + /* Stop kthread signal shall trigger work_done one more time */ + kthread_stop(phba->worker_thread); + /* Final cleanup of txcmplq and reset the HBA */ lpfc_sli_brdrestart(phba); lpfc_stop_phba_timers(phba); @@ -3095,7 +3160,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev } /** - * lpfc_pci_suspend_one: lpfc PCI func to suspend device for power management. + * lpfc_pci_suspend_one - lpfc PCI func to suspend device for power management * @pdev: pointer to PCI device * @msg: power management message * @@ -3139,7 +3204,7 @@ lpfc_pci_suspend_one(struct pci_dev *pde } /** - * lpfc_pci_resume_one: lpfc PCI func to resume device for power management. + * lpfc_pci_resume_one - lpfc PCI func to resume device for power management * @pdev: pointer to PCI device * * This routine is to be registered to the kernel's PCI subsystem to support @@ -3204,7 +3269,7 @@ lpfc_pci_resume_one(struct pci_dev *pdev } /** - * lpfc_io_error_detected: Driver method for handling PCI I/O error detected. + * lpfc_io_error_detected - Driver method for handling PCI I/O error detected * @pdev: pointer to PCI device. * @state: the current PCI connection state. * @@ -3254,7 +3319,7 @@ static pci_ers_result_t lpfc_io_error_de } /** - * lpfc_io_slot_reset: Restart a PCI device from scratch. + * lpfc_io_slot_reset - Restart a PCI device from scratch * @pdev: pointer to PCI device. * * This routine is registered to the PCI subsystem for error handling. This is @@ -3313,7 +3378,7 @@ static pci_ers_result_t lpfc_io_slot_res } /** - * lpfc_io_resume: Resume PCI I/O operation. + * lpfc_io_resume - Resume PCI I/O operation * @pdev: pointer to PCI device * * This routine is registered to the PCI subsystem for error handling. It is @@ -3426,7 +3491,7 @@ static struct pci_driver lpfc_driver = { }; /** - * lpfc_init: lpfc module initialization routine. + * lpfc_init - lpfc module initialization routine * * This routine is to be invoked when the lpfc module is loaded into the * kernel. The special kernel macro module_init() is used to indicate the @@ -3472,7 +3537,7 @@ lpfc_init(void) } /** - * lpfc_exit: lpfc module removal routine. + * lpfc_exit - lpfc module removal routine * * This routine is invoked when the lpfc module is removed from the kernel. * The special kernel macro module_exit() is used to indicate the role of diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_logmsg.h linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_logmsg.h --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_logmsg.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_logmsg.h 2009-05-13 09:46:19.000000000 +0200 @@ -27,7 +27,7 @@ #define LOG_FCP 0x40 /* FCP traffic history */ #define LOG_NODE 0x80 /* Node table events */ #define LOG_TEMP 0x100 /* Temperature sensor events */ -#define LOG_BG 0x200 /* BlockBuard events */ +#define LOG_BG 0x200 /* BlockGuard events */ #define LOG_MISC 0x400 /* Miscellaneous events */ #define LOG_SLI 0x800 /* SLI events */ #define LOG_FCP_ERROR 0x1000 /* log errors, not underruns */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_mbox.c linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_mbox.c --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_mbox.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_mbox.c 2009-05-13 09:46:19.000000000 +0200 @@ -39,7 +39,7 @@ #include "lpfc_compat.h" /** - * lpfc_dump_mem: Prepare a mailbox command for retrieving HBA's VPD memory. + * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @offset: offset for dumping VPD memory mailbox command. @@ -77,9 +77,10 @@ lpfc_dump_mem(struct lpfc_hba * phba, LP } /** - * lpfc_dump_mem: Prepare a mailbox command for retrieving wakeup params. + * lpfc_dump_wakeup_param - Prepare mailbox command for retrieving wakeup params * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. + * * This function create a dump memory mailbox command to dump wake up * parameters. */ @@ -109,7 +110,7 @@ lpfc_dump_wakeup_param(struct lpfc_hba * } /** - * lpfc_read_nv: Prepare a mailbox command for reading HBA's NVRAM param. + * lpfc_read_nv - Prepare a mailbox command for reading HBA's NVRAM param * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -132,7 +133,7 @@ lpfc_read_nv(struct lpfc_hba * phba, LPF } /** - * lpfc_config_async: Prepare a mailbox command for enabling HBA async event. + * lpfc_config_async - Prepare a mailbox command for enabling HBA async event * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @ring: ring number for the asynchronous event to be configured. @@ -159,7 +160,7 @@ lpfc_config_async(struct lpfc_hba * phba } /** - * lpfc_heart_beat: Prepare a mailbox command for heart beat. + * lpfc_heart_beat - Prepare a mailbox command for heart beat * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -184,7 +185,7 @@ lpfc_heart_beat(struct lpfc_hba * phba, } /** - * lpfc_read_la: Prepare a mailbox command for reading HBA link attention. + * lpfc_read_la - Prepare a mailbox command for reading HBA link attention * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @mp: DMA buffer memory for reading the link attention information into. @@ -228,7 +229,7 @@ lpfc_read_la(struct lpfc_hba * phba, LPF } /** - * lpfc_clear_la: Prepare a mailbox command for clearing HBA link attention. + * lpfc_clear_la - Prepare a mailbox command for clearing HBA link attention * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -257,7 +258,7 @@ lpfc_clear_la(struct lpfc_hba * phba, LP } /** - * lpfc_config_link: Prepare a mailbox command for configuring link on a HBA. + * lpfc_config_link - Prepare a mailbox command for configuring link on a HBA * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -305,7 +306,7 @@ lpfc_config_link(struct lpfc_hba * phba, } /** - * lpfc_config_msi: Prepare a mailbox command for configuring msi-x. + * lpfc_config_msi - Prepare a mailbox command for configuring msi-x * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -383,7 +384,7 @@ lpfc_config_msi(struct lpfc_hba *phba, L } /** - * lpfc_init_link: Prepare a mailbox command for initialize link on a HBA. + * lpfc_init_link - Prepare a mailbox command for initialize link on a HBA * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @topology: the link topology for the link to be initialized to. @@ -463,7 +464,7 @@ lpfc_init_link(struct lpfc_hba * phba, } /** - * lpfc_read_sparam: Prepare a mailbox command for reading HBA parameters. + * lpfc_read_sparam - Prepare a mailbox command for reading HBA parameters * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @vpi: virtual N_Port identifier. @@ -523,7 +524,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, } /** - * lpfc_unreg_did: Prepare a mailbox command for unregistering DID. + * lpfc_unreg_did - Prepare a mailbox command for unregistering DID * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @did: remote port identifier. @@ -555,7 +556,7 @@ lpfc_unreg_did(struct lpfc_hba * phba, u } /** - * lpfc_read_config: Prepare a mailbox command for reading HBA configuration. + * lpfc_read_config - Prepare a mailbox command for reading HBA configuration * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -581,7 +582,7 @@ lpfc_read_config(struct lpfc_hba * phba, } /** - * lpfc_read_lnk_stat: Prepare a mailbox command for reading HBA link stats. + * lpfc_read_lnk_stat - Prepare a mailbox command for reading HBA link stats * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -606,7 +607,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phb } /** - * lpfc_reg_login: Prepare a mailbox command for registering remote login. + * lpfc_reg_login - Prepare a mailbox command for registering remote login * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @did: remote port identifier. @@ -677,7 +678,7 @@ lpfc_reg_login(struct lpfc_hba *phba, ui } /** - * lpfc_unreg_login: Prepare a mailbox command for unregistering remote login. + * lpfc_unreg_login - Prepare a mailbox command for unregistering remote login * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @rpi: remote port identifier @@ -709,7 +710,7 @@ lpfc_unreg_login(struct lpfc_hba *phba, } /** - * lpfc_reg_vpi: Prepare a mailbox command for registering vport identifier. + * lpfc_reg_vpi - Prepare a mailbox command for registering vport identifier * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @sid: Fibre Channel S_ID (N_Port_ID assigned to a virtual N_Port). @@ -741,7 +742,7 @@ lpfc_reg_vpi(struct lpfc_hba *phba, uint } /** - * lpfc_unreg_vpi: Prepare a mailbox command for unregistering vport id. + * lpfc_unreg_vpi - Prepare a mailbox command for unregistering vport id * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @pmb: pointer to the driver internal queue element for mailbox command. @@ -771,7 +772,7 @@ lpfc_unreg_vpi(struct lpfc_hba *phba, ui } /** - * lpfc_config_pcb_setup: Set up IOCB rings in the Port Control Block (PCB) + * lpfc_config_pcb_setup - Set up IOCB rings in the Port Control Block (PCB) * @phba: pointer to lpfc hba data structure. * * This routine sets up and initializes the IOCB rings in the Port Control @@ -835,7 +836,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * } /** - * lpfc_read_rev: Prepare a mailbox command for reading HBA revision. + * lpfc_read_rev - Prepare a mailbox command for reading HBA revision * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -861,7 +862,7 @@ lpfc_read_rev(struct lpfc_hba * phba, LP } /** - * lpfc_build_hbq_profile2: Set up the HBQ Selection Profile 2. + * lpfc_build_hbq_profile2 - Set up the HBQ Selection Profile 2 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. * @hbq_desc: pointer to the HBQ selection profile descriptor. * @@ -880,7 +881,7 @@ lpfc_build_hbq_profile2(struct config_hb } /** - * lpfc_build_hbq_profile3: Set up the HBQ Selection Profile 3. + * lpfc_build_hbq_profile3 - Set up the HBQ Selection Profile 3 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. * @hbq_desc: pointer to the HBQ selection profile descriptor. * @@ -902,7 +903,7 @@ lpfc_build_hbq_profile3(struct config_hb } /** - * lpfc_build_hbq_profile5: Set up the HBQ Selection Profile 5. + * lpfc_build_hbq_profile5 - Set up the HBQ Selection Profile 5 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. * @hbq_desc: pointer to the HBQ selection profile descriptor. * @@ -925,7 +926,7 @@ lpfc_build_hbq_profile5(struct config_hb } /** - * lpfc_config_hbq: Prepare a mailbox command for configuring an HBQ. + * lpfc_config_hbq - Prepare a mailbox command for configuring an HBQ * @phba: pointer to lpfc hba data structure. * @id: HBQ identifier. * @hbq_desc: pointer to the HBA descriptor data structure. @@ -999,7 +1000,7 @@ lpfc_config_hbq(struct lpfc_hba *phba, u } /** - * lpfc_config_ring: Prepare a mailbox command for configuring an IOCB ring. + * lpfc_config_ring - Prepare a mailbox command for configuring an IOCB ring * @phba: pointer to lpfc hba data structure. * @ring: * @pmb: pointer to the driver internal queue element for mailbox command. @@ -1057,7 +1058,7 @@ lpfc_config_ring(struct lpfc_hba * phba, } /** - * lpfc_config_port: Prepare a mailbox command for configuring port. + * lpfc_config_port - Prepare a mailbox command for configuring port * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -1227,7 +1228,7 @@ lpfc_config_port(struct lpfc_hba *phba, } /** - * lpfc_kill_board: Prepare a mailbox command for killing board. + * lpfc_kill_board - Prepare a mailbox command for killing board * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -1253,7 +1254,7 @@ lpfc_kill_board(struct lpfc_hba * phba, } /** - * lpfc_mbox_put: Put a mailbox cmd into the tail of driver's mailbox queue. + * lpfc_mbox_put - Put a mailbox cmd into the tail of driver's mailbox queue * @phba: pointer to lpfc hba data structure. * @mbq: pointer to the driver internal queue element for mailbox command. * @@ -1277,7 +1278,7 @@ lpfc_mbox_put(struct lpfc_hba * phba, LP } /** - * lpfc_mbox_get: Remove a mailbox cmd from the head of driver's mailbox queue. + * lpfc_mbox_get - Remove a mailbox cmd from the head of driver's mailbox queue * @phba: pointer to lpfc hba data structure. * * Driver maintains a internal mailbox command queue implemented as a linked @@ -1304,7 +1305,7 @@ lpfc_mbox_get(struct lpfc_hba * phba) } /** - * lpfc_mbox_cmpl_put: Put mailbox command into mailbox command complete list. + * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list * @phba: pointer to lpfc hba data structure. * @mbq: pointer to the driver internal queue element for mailbox command. * @@ -1327,7 +1328,7 @@ lpfc_mbox_cmpl_put(struct lpfc_hba * phb } /** - * lpfc_mbox_tmo_val: Retrieve mailbox command timeout value. + * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value * @phba: pointer to lpfc hba data structure. * @cmd: mailbox command code. * diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_mem.c linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_mem.c --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_mem.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_mem.c 2009-05-13 09:46:19.000000000 +0200 @@ -41,7 +41,7 @@ /** - * lpfc_mem_alloc: create and allocate all PCI and memory pools + * lpfc_mem_alloc - create and allocate all PCI and memory pools * @phba: HBA to allocate pools for * * Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool, @@ -136,12 +136,12 @@ lpfc_mem_alloc(struct lpfc_hba * phba) } /** - * lpfc_mem_free: Frees all PCI and memory allocated by lpfc_mem_alloc + * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc * @phba: HBA to free memory for * * Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool, * lpfc_hbq_pool. Frees kmalloc-backed mempools for LPFC_MBOXQ_t and - * lpfc_nodelist. Also frees the VPI bitmask. + * lpfc_nodelist. Also frees the VPI bitmask * * Returns: None **/ @@ -212,7 +212,7 @@ lpfc_mem_free(struct lpfc_hba * phba) } /** - * lpfc_mbuf_alloc: Allocate an mbuf from the lpfc_mbuf_pool PCI pool + * lpfc_mbuf_alloc - Allocate an mbuf from the lpfc_mbuf_pool PCI pool * @phba: HBA which owns the pool to allocate from * @mem_flags: indicates if this is a priority (MEM_PRI) allocation * @handle: used to return the DMA-mapped address of the mbuf @@ -249,7 +249,7 @@ lpfc_mbuf_alloc(struct lpfc_hba *phba, i } /** - * __lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (locked) + * __lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (locked) * @phba: HBA which owns the pool to return to * @virt: mbuf to free * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed @@ -278,7 +278,7 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, } /** - * lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked) + * lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked) * @phba: HBA which owns the pool to return to * @virt: mbuf to free * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed @@ -291,7 +291,6 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, * Returns: None **/ void - lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) { unsigned long iflags; @@ -303,7 +302,7 @@ lpfc_mbuf_free(struct lpfc_hba * phba, v } /** - * lpfc_els_hbq_alloc: Allocate an HBQ buffer + * lpfc_els_hbq_alloc - Allocate an HBQ buffer * @phba: HBA to allocate HBQ buffer for * * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI @@ -335,7 +334,7 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba } /** - * lpfc_mem_hbq_free: Frees an HBQ buffer allocated with lpfc_els_hbq_alloc + * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc * @phba: HBA buffer was allocated for * @hbqbp: HBQ container returned by lpfc_els_hbq_alloc * @@ -355,7 +354,7 @@ lpfc_els_hbq_free(struct lpfc_hba *phba, } /** - * lpfc_in_buf_free: Free a DMA buffer + * lpfc_in_buf_free - Free a DMA buffer * @phba: HBA buffer is associated with * @mp: Buffer to free * diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_nportdisc.c linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_nportdisc.c --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_nportdisc.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_nportdisc.c 2009-05-13 09:46:19.000000000 +0200 @@ -192,7 +192,6 @@ lpfc_els_abort(struct lpfc_hba *phba, st struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING]; struct lpfc_iocbq *iocb, *next_iocb; - IOCB_t *cmd; /* Abort outstanding I/O on NPort */ lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_DISCOVERY, @@ -223,19 +222,10 @@ lpfc_els_abort(struct lpfc_hba *phba, st } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); + lpfc_cancel_retry_delay_tmo(phba->pport, ndlp); return 0; } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_scsi.c linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_scsi.c --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_scsi.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_scsi.c 2009-05-13 09:46:19.000000000 +0200 @@ -112,7 +112,7 @@ lpfc_debug_save_dif(struct scsi_cmnd *cm } /** - * lpfc_update_stats: Update statistical data for the command completion. + * lpfc_update_stats - Update statistical data for the command completion * @phba: Pointer to HBA object. * @lpfc_cmd: lpfc scsi command object pointer. * @@ -165,8 +165,7 @@ lpfc_update_stats(struct lpfc_hba *phba, } /** - * lpfc_send_sdev_queuedepth_change_event: Posts a queuedepth change - * event. + * lpfc_send_sdev_queuedepth_change_event - Posts a queuedepth change event * @phba: Pointer to HBA context object. * @vport: Pointer to vport object. * @ndlp: Pointer to FC node associated with the target. @@ -220,7 +219,7 @@ lpfc_send_sdev_queuedepth_change_event(s } /** - * lpfc_rampdown_queue_depth: Post RAMP_DOWN_QUEUE event to worker thread. + * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread * @phba: The Hba for which this call is being executed. * * This routine is called when there is resource error in driver or firmware. @@ -261,7 +260,7 @@ lpfc_rampdown_queue_depth(struct lpfc_hb } /** - * lpfc_rampup_queue_depth: Post RAMP_UP_QUEUE event for worker thread. + * lpfc_rampup_queue_depth - Post RAMP_UP_QUEUE event for worker thread * @phba: The Hba for which this call is being executed. * * This routine post WORKER_RAMP_UP_QUEUE event for @phba vport. This routine @@ -273,14 +272,14 @@ lpfc_rampdown_queue_depth(struct lpfc_hb **/ static inline void lpfc_rampup_queue_depth(struct lpfc_vport *vport, - struct scsi_device *sdev) + uint32_t queue_depth) { unsigned long flags; struct lpfc_hba *phba = vport->phba; uint32_t evt_posted; atomic_inc(&phba->num_cmd_success); - if (vport->cfg_lun_queue_depth <= sdev->queue_depth) + if (vport->cfg_lun_queue_depth <= queue_depth) return; spin_lock_irqsave(&phba->hbalock, flags); if (((phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) > jiffies) || @@ -303,7 +302,7 @@ lpfc_rampup_queue_depth(struct lpfc_vpor } /** - * lpfc_ramp_down_queue_handler: WORKER_RAMP_DOWN_QUEUE event handler. + * lpfc_ramp_down_queue_handler - WORKER_RAMP_DOWN_QUEUE event handler * @phba: The Hba for which this call is being executed. * * This routine is called to process WORKER_RAMP_DOWN_QUEUE event for worker @@ -361,7 +360,7 @@ lpfc_ramp_down_queue_handler(struct lpfc } /** - * lpfc_ramp_up_queue_handler: WORKER_RAMP_UP_QUEUE event handler. + * lpfc_ramp_up_queue_handler - WORKER_RAMP_UP_QUEUE event handler * @phba: The Hba for which this call is being executed. * * This routine is called to process WORKER_RAMP_UP_QUEUE event for worker @@ -410,7 +409,7 @@ lpfc_ramp_up_queue_handler(struct lpfc_h } /** - * lpfc_scsi_dev_block: set all scsi hosts to block state. + * lpfc_scsi_dev_block - set all scsi hosts to block state * @phba: Pointer to HBA context object. * * This function walks vport list and set each SCSI host to block state @@ -439,7 +438,7 @@ lpfc_scsi_dev_block(struct lpfc_hba *phb } /** - * lpfc_new_scsi_buf: Scsi buffer allocator. + * lpfc_new_scsi_buf - Scsi buffer allocator * @vport: The virtual port for which this call being executed. * * This routine allocates a scsi buffer, which contains all the necessary @@ -563,7 +562,7 @@ lpfc_new_scsi_buf(struct lpfc_vport *vpo } /** - * lpfc_get_scsi_buf: Get a scsi buffer from lpfc_scsi_buf_list list of Hba. + * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba * @phba: The Hba for which this call is being executed. * * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list @@ -592,7 +591,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba } /** - * lpfc_release_scsi_buf: Return a scsi buffer back to hba lpfc_scsi_buf_list list. + * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list * @phba: The Hba for which this call is being executed. * @psb: The scsi buffer which is being released. * @@ -611,7 +610,7 @@ lpfc_release_scsi_buf(struct lpfc_hba *p } /** - * lpfc_scsi_prep_dma_buf: Routine to do DMA mapping for scsi buffer. + * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer * @phba: The Hba for which this call is being executed. * @lpfc_cmd: The scsi buffer which is going to be mapped. * @@ -738,7 +737,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba * * Due to difference in data length between DIF/non-DIF paths, * we need to set word 4 of IOCB here */ - iocb_cmd->un.fcpi.fcpi_parm = le32_to_cpu(scsi_bufflen(scsi_cmnd)); + iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd); return 0; } @@ -823,9 +822,9 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc) /** * lpfc_get_cmd_dif_parms - Extract DIF parameters from SCSI command * @sc: in: SCSI command - * @apptagmask out: app tag mask - * @apptagval out: app tag value - * @reftag out: ref tag (reference tag) + * @apptagmask: out: app tag mask + * @apptagval: out: app tag value + * @reftag: out: ref tag (reference tag) * * Description: * Extract DIF paramters from the command if possible. Otherwise, @@ -1413,7 +1412,7 @@ out: } /** - * lpfc_send_scsi_error_event: Posts an event when there is SCSI error. + * lpfc_send_scsi_error_event - Posts an event when there is SCSI error * @phba: Pointer to hba context object. * @vport: Pointer to vport object. * @lpfc_cmd: Pointer to lpfc scsi command which reported the error. @@ -1505,7 +1504,7 @@ lpfc_send_scsi_error_event(struct lpfc_h } /** - * lpfc_scsi_unprep_dma_buf: Routine to un-map DMA mapping of scatter gather. + * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather * @phba: The Hba for which this call is being executed. * @psb: The scsi buffer which is going to be un-mapped. * @@ -1530,7 +1529,7 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba } /** - * lpfc_handler_fcp_err: FCP response handler. + * lpfc_handler_fcp_err - FCP response handler * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. * @rsp_iocb: The response IOCB which contains FCP error. @@ -1674,7 +1673,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *v } /** - * lpfc_scsi_cmd_iocb_cmpl: Scsi cmnd IOCB completion routine. + * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine * @phba: The Hba for which this call is being executed. * @pIocbIn: The command IOCBQ for the scsi cmnd. * @pIocbOut: The response IOCBQ for the scsi cmnd . @@ -1694,10 +1693,12 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba struct lpfc_nodelist *pnode = rdata->pnode; struct scsi_cmnd *cmd = lpfc_cmd->pCmd; int result; - struct scsi_device *sdev, *tmp_sdev; + struct scsi_device *tmp_sdev; int depth = 0; unsigned long flags; struct lpfc_fast_path_event *fast_path_evt; + struct Scsi_Host *shost = cmd->device->host; + uint32_t queue_depth, scsi_id; lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4]; lpfc_cmd->status = pIocbOut->iocb.ulpStatus; @@ -1808,11 +1809,10 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba lpfc_update_stats(phba, lpfc_cmd); result = cmd->result; - sdev = cmd->device; if (vport->cfg_max_scsicmpl_time && time_after(jiffies, lpfc_cmd->start_time + msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) { - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); if (pnode && NLP_CHK_NODE_ACT(pnode)) { if (pnode->cmd_qdepth > atomic_read(&pnode->cmd_pending) && @@ -1825,22 +1825,26 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba pnode->last_change_time = jiffies; } - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); } else if (pnode && NLP_CHK_NODE_ACT(pnode)) { if ((pnode->cmd_qdepth < LPFC_MAX_TGT_QDEPTH) && time_after(jiffies, pnode->last_change_time + msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) { - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); pnode->cmd_qdepth += pnode->cmd_qdepth * LPFC_TGTQ_RAMPUP_PCENT / 100; if (pnode->cmd_qdepth > LPFC_MAX_TGT_QDEPTH) pnode->cmd_qdepth = LPFC_MAX_TGT_QDEPTH; pnode->last_change_time = jiffies; - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); } } lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); + + /* The sdev is not guaranteed to be valid post scsi_done upcall. */ + queue_depth = cmd->device->queue_depth; + scsi_id = cmd->device->id; cmd->scsi_done(cmd); if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { @@ -1848,28 +1852,28 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba * If there is a thread waiting for command completion * wake up the thread. */ - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); lpfc_cmd->pCmd = NULL; if (lpfc_cmd->waitq) wake_up(lpfc_cmd->waitq); - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); lpfc_release_scsi_buf(phba, lpfc_cmd); return; } if (!result) - lpfc_rampup_queue_depth(vport, sdev); + lpfc_rampup_queue_depth(vport, queue_depth); if (!result && pnode && NLP_CHK_NODE_ACT(pnode) && ((jiffies - pnode->last_ramp_up_time) > LPFC_Q_RAMP_UP_INTERVAL * HZ) && ((jiffies - pnode->last_q_full_time) > LPFC_Q_RAMP_UP_INTERVAL * HZ) && - (vport->cfg_lun_queue_depth > sdev->queue_depth)) { - shost_for_each_device(tmp_sdev, sdev->host) { + (vport->cfg_lun_queue_depth > queue_depth)) { + shost_for_each_device(tmp_sdev, shost) { if (vport->cfg_lun_queue_depth > tmp_sdev->queue_depth){ - if (tmp_sdev->id != sdev->id) + if (tmp_sdev->id != scsi_id) continue; if (tmp_sdev->ordered_tags) scsi_adjust_queue_depth(tmp_sdev, @@ -1885,7 +1889,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba } lpfc_send_sdev_queuedepth_change_event(phba, vport, pnode, 0xFFFFFFFF, - sdev->queue_depth - 1, sdev->queue_depth); + queue_depth , queue_depth + 1); } /* @@ -1896,8 +1900,8 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba NLP_CHK_NODE_ACT(pnode)) { pnode->last_q_full_time = jiffies; - shost_for_each_device(tmp_sdev, sdev->host) { - if (tmp_sdev->id != sdev->id) + shost_for_each_device(tmp_sdev, shost) { + if (tmp_sdev->id != scsi_id) continue; depth = scsi_track_queue_full(tmp_sdev, tmp_sdev->queue_depth - 1); @@ -1909,7 +1913,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba * scsi_track_queue_full. */ if (depth == -1) - depth = sdev->host->cmd_per_lun; + depth = shost->cmd_per_lun; if (depth) { lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, @@ -1925,17 +1929,17 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba * If there is a thread waiting for command completion * wake up the thread. */ - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); lpfc_cmd->pCmd = NULL; if (lpfc_cmd->waitq) wake_up(lpfc_cmd->waitq); - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); lpfc_release_scsi_buf(phba, lpfc_cmd); } /** - * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB. + * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB * @data: A pointer to the immediate command data portion of the IOCB. * @fcp_cmnd: The FCP Command that is provided by the SCSI layer. * @@ -1953,7 +1957,7 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struc } /** - * lpfc_scsi_prep_cmnd: Routine to convert scsi cmnd to FCP information unit. + * lpfc_scsi_prep_cmnd - Routine to convert scsi cmnd to FCP information unit * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: The scsi command which needs to send. * @pnode: Pointer to lpfc_nodelist. @@ -2047,7 +2051,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *v } /** - * lpfc_scsi_prep_task_mgmt_cmnd: Convert scsi TM cmnd to FCP information unit. + * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. * @lun: Logical unit number. @@ -2110,7 +2114,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc } /** - * lpc_taskmgmt_def_cmpl: IOCB completion routine for task management command. + * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command * @phba: The Hba for which this call is being executed. * @cmdiocbq: Pointer to lpfc_iocbq data structure. * @rspiocbq: Pointer to lpfc_iocbq data structure. @@ -2131,7 +2135,7 @@ lpfc_tskmgmt_def_cmpl(struct lpfc_hba *p } /** - * lpfc_scsi_tgt_reset: Target reset handler. + * lpfc_scsi_tgt_reset - Target reset handler * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure * @vport: The virtual port for which this call is being executed. * @tgt_id: Target ID. @@ -2198,7 +2202,7 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf } /** - * lpfc_info: Info entry point of scsi_host_template data structure. + * lpfc_info - Info entry point of scsi_host_template data structure * @host: The scsi host for which this call is being executed. * * This routine provides module information about hba. @@ -2236,7 +2240,7 @@ lpfc_info(struct Scsi_Host *host) } /** - * lpfc_poll_rearm_time: Routine to modify fcp_poll timer of hba. + * lpfc_poll_rearm_time - Routine to modify fcp_poll timer of hba * @phba: The Hba for which this call is being executed. * * This routine modifies fcp_poll_timer field of @phba by cfg_poll_tmo. @@ -2253,7 +2257,7 @@ static __inline__ void lpfc_poll_rearm_t } /** - * lpfc_poll_start_timer: Routine to start fcp_poll_timer of HBA. + * lpfc_poll_start_timer - Routine to start fcp_poll_timer of HBA * @phba: The Hba for which this call is being executed. * * This routine starts the fcp_poll_timer of @phba. @@ -2264,7 +2268,7 @@ void lpfc_poll_start_timer(struct lpfc_h } /** - * lpfc_poll_timeout: Restart polling timer. + * lpfc_poll_timeout - Restart polling timer * @ptr: Map to lpfc_hba data structure pointer. * * This routine restarts fcp_poll timer, when FCP ring polling is enable @@ -2283,8 +2287,7 @@ void lpfc_poll_timeout(unsigned long ptr } /** - * lpfc_queuecommand: Queuecommand entry point of Scsi Host Templater data - * structure. + * lpfc_queuecommand - scsi_host_template queuecommand entry point * @cmnd: Pointer to scsi_cmnd data structure. * @done: Pointer to done routine. * @@ -2450,7 +2453,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd } /** - * lpfc_block_error_handler: Routine to block error handler. + * lpfc_block_error_handler - Routine to block error handler * @cmnd: Pointer to scsi_cmnd data structure. * * This routine blocks execution till fc_rport state is not FC_PORSTAT_BLCOEKD. @@ -2472,8 +2475,7 @@ lpfc_block_error_handler(struct scsi_cmn } /** - * lpfc_abort_handler: Eh_abort_handler entry point of Scsi Host Template data - *structure. + * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point * @cmnd: Pointer to scsi_cmnd data structure. * * This routine aborts @cmnd pending in base driver. @@ -2578,8 +2580,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmn } /** - * lpfc_device_reset_handler: eh_device_reset entry point of Scsi Host Template - *data structure. + * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point * @cmnd: Pointer to scsi_cmnd data structure. * * This routine does a device reset by sending a TARGET_RESET task management @@ -2587,7 +2588,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmn * * Return code : * 0x2003 - Error - * 0ex2002 - Success + * 0x2002 - Success **/ static int lpfc_device_reset_handler(struct scsi_cmnd *cmnd) @@ -2707,8 +2708,7 @@ lpfc_device_reset_handler(struct scsi_cm } /** - * lpfc_bus_reset_handler: eh_bus_reset_handler entry point of Scsi Host - * Template data structure. + * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point * @cmnd: Pointer to scsi_cmnd data structure. * * This routine does target reset to all target on @cmnd->device->host. @@ -2808,8 +2808,7 @@ lpfc_bus_reset_handler(struct scsi_cmnd } /** - * lpfc_slave_alloc: slave_alloc entry point of Scsi Host Template data - * structure. + * lpfc_slave_alloc - scsi_host_template slave_alloc entry point * @sdev: Pointer to scsi_device. * * This routine populates the cmds_per_lun count + 2 scsi_bufs into this host's @@ -2883,8 +2882,7 @@ lpfc_slave_alloc(struct scsi_device *sde } /** - * lpfc_slave_configure: slave_configure entry point of Scsi Host Templater data - * structure. + * lpfc_slave_configure - scsi_host_template slave_configure entry point * @sdev: Pointer to scsi_device. * * This routine configures following items @@ -2925,7 +2923,7 @@ lpfc_slave_configure(struct scsi_device } /** - * lpfc_slave_destroy: slave_destroy entry point of SHT data structure. + * lpfc_slave_destroy - slave_destroy entry point of SHT data structure * @sdev: Pointer to scsi_device. * * This routine sets @sdev hostatdata filed to null. diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_sli.c linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_sli.c --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_sli.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_sli.c 2009-05-13 09:46:19.000000000 +0200 @@ -68,7 +68,7 @@ typedef enum _lpfc_iocb_type { } lpfc_iocb_type; /** - * lpfc_cmd_iocb: Get next command iocb entry in the ring. + * lpfc_cmd_iocb - Get next command iocb entry in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -85,7 +85,7 @@ lpfc_cmd_iocb(struct lpfc_hba *phba, str } /** - * lpfc_resp_iocb: Get next response iocb entry in the ring. + * lpfc_resp_iocb - Get next response iocb entry in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -102,7 +102,7 @@ lpfc_resp_iocb(struct lpfc_hba *phba, st } /** - * __lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool. + * __lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool * @phba: Pointer to HBA context object. * * This function is called with hbalock held. This function @@ -121,7 +121,7 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *ph } /** - * lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool. + * lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool * @phba: Pointer to HBA context object. * * This function is called with no lock held. This function @@ -142,7 +142,7 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba } /** - * __lpfc_sli_release_iocbq: Release iocb to the iocb pool. + * __lpfc_sli_release_iocbq - Release iocb to the iocb pool * @phba: Pointer to HBA context object. * @iocbq: Pointer to driver iocb object. * @@ -164,7 +164,7 @@ __lpfc_sli_release_iocbq(struct lpfc_hba } /** - * lpfc_sli_release_iocbq: Release iocb to the iocb pool. + * lpfc_sli_release_iocbq - Release iocb to the iocb pool * @phba: Pointer to HBA context object. * @iocbq: Pointer to driver iocb object. * @@ -185,8 +185,40 @@ lpfc_sli_release_iocbq(struct lpfc_hba * } /** - * lpfc_sli_iocb_cmd_type: Get the iocb type. - * @iocb_cmnd : iocb command code. + * lpfc_sli_cancel_iocbs - Cancel all iocbs from a list. + * @phba: Pointer to HBA context object. + * @iocblist: List of IOCBs. + * @ulpstatus: ULP status in IOCB command field. + * @ulpWord4: ULP word-4 in IOCB command field. + * + * This function is called with a list of IOCBs to cancel. It cancels the IOCB + * on the list by invoking the complete callback function associated with the + * IOCB with the provided @ulpstatus and @ulpword4 set to the IOCB commond + * fields. + **/ +void +lpfc_sli_cancel_iocbs(struct lpfc_hba *phba, struct list_head *iocblist, + uint32_t ulpstatus, uint32_t ulpWord4) +{ + struct lpfc_iocbq *piocb; + + while (!list_empty(iocblist)) { + list_remove_head(iocblist, piocb, struct lpfc_iocbq, list); + + if (!piocb->iocb_cmpl) + lpfc_sli_release_iocbq(phba, piocb); + else { + piocb->iocb.ulpStatus = ulpstatus; + piocb->iocb.un.ulpWord[4] = ulpWord4; + (piocb->iocb_cmpl) (phba, piocb, piocb); + } + } + return; +} + +/** + * lpfc_sli_iocb_cmd_type - Get the iocb type + * @iocb_cmnd: iocb command code. * * This function is called by ring event handler function to get the iocb type. * This function translates the iocb command to an iocb command type used to @@ -295,7 +327,7 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd } /** - * lpfc_sli_ring_map: Issue config_ring mbox for all rings. + * lpfc_sli_ring_map - Issue config_ring mbox for all rings * @phba: Pointer to HBA context object. * * This function is called from SLI initialization code @@ -338,7 +370,7 @@ lpfc_sli_ring_map(struct lpfc_hba *phba) } /** - * lpfc_sli_ringtxcmpl_put: Adds new iocb to the txcmplq. + * lpfc_sli_ringtxcmpl_put - Adds new iocb to the txcmplq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to the driver iocb object. @@ -370,7 +402,7 @@ lpfc_sli_ringtxcmpl_put(struct lpfc_hba } /** - * lpfc_sli_ringtx_get: Get first element of the txq. + * lpfc_sli_ringtx_get - Get first element of the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -391,7 +423,7 @@ lpfc_sli_ringtx_get(struct lpfc_hba *phb } /** - * lpfc_sli_next_iocb_slot: Get next iocb slot in the ring. + * lpfc_sli_next_iocb_slot - Get next iocb slot in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -445,7 +477,7 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba } /** - * lpfc_sli_next_iotag: Get an iotag for the iocb. + * lpfc_sli_next_iotag - Get an iotag for the iocb * @phba: Pointer to HBA context object. * @iocbq: Pointer to driver iocb object. * @@ -520,7 +552,7 @@ lpfc_sli_next_iotag(struct lpfc_hba *phb } /** - * lpfc_sli_submit_iocb: Submit an iocb to the firmware. + * lpfc_sli_submit_iocb - Submit an iocb to the firmware * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @iocb: Pointer to iocb slot in the ring. @@ -577,7 +609,7 @@ lpfc_sli_submit_iocb(struct lpfc_hba *ph } /** - * lpfc_sli_update_full_ring: Update the chip attention register. + * lpfc_sli_update_full_ring - Update the chip attention register * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -608,7 +640,7 @@ lpfc_sli_update_full_ring(struct lpfc_hb } /** - * lpfc_sli_update_ring: Update chip attention register. + * lpfc_sli_update_ring - Update chip attention register * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -632,7 +664,7 @@ lpfc_sli_update_ring(struct lpfc_hba *ph } /** - * lpfc_sli_resume_iocb: Process iocbs in the txq. + * lpfc_sli_resume_iocb - Process iocbs in the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -672,7 +704,7 @@ lpfc_sli_resume_iocb(struct lpfc_hba *ph } /** - * lpfc_sli_next_hbq_slot: Get next hbq entry for the HBQ. + * lpfc_sli_next_hbq_slot - Get next hbq entry for the HBQ * @phba: Pointer to HBA context object. * @hbqno: HBQ number. * @@ -717,7 +749,7 @@ lpfc_sli_next_hbq_slot(struct lpfc_hba * } /** - * lpfc_sli_hbqbuf_free_all: Free all the hbq buffers. + * lpfc_sli_hbqbuf_free_all - Free all the hbq buffers * @phba: Pointer to HBA context object. * * This function is called with no lock held to free all the @@ -771,7 +803,7 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba } /** - * lpfc_sli_hbq_to_firmware: Post the hbq buffer to firmware. + * lpfc_sli_hbq_to_firmware - Post the hbq buffer to firmware * @phba: Pointer to HBA context object. * @hbqno: HBQ number. * @hbq_buf: Pointer to HBQ buffer. @@ -818,8 +850,8 @@ static struct lpfc_hbq_init lpfc_els_hbq .profile = 0, .ring_mask = (1 << LPFC_ELS_RING), .buffer_count = 0, - .init_count = 20, - .add_count = 5, + .init_count = 40, + .add_count = 40, }; /* HBQ for the extra ring if needed */ @@ -841,7 +873,7 @@ struct lpfc_hbq_init *lpfc_hbq_defs[] = }; /** - * lpfc_sli_hbqbuf_fill_hbqs: Post more hbq buffers to HBQ. + * lpfc_sli_hbqbuf_fill_hbqs - Post more hbq buffers to HBQ * @phba: Pointer to HBA context object. * @hbqno: HBQ number. * @count: Number of HBQ buffers to be posted. @@ -901,7 +933,7 @@ err: } /** - * lpfc_sli_hbqbuf_add_hbqs: Post more HBQ buffers to firmware. + * lpfc_sli_hbqbuf_add_hbqs - Post more HBQ buffers to firmware * @phba: Pointer to HBA context object. * @qno: HBQ number. * @@ -917,7 +949,7 @@ lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba } /** - * lpfc_sli_hbqbuf_init_hbqs: Post initial buffers to the HBQ. + * lpfc_sli_hbqbuf_init_hbqs - Post initial buffers to the HBQ * @phba: Pointer to HBA context object. * @qno: HBQ queue number. * @@ -933,7 +965,7 @@ lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hb } /** - * lpfc_sli_hbqbuf_find: Find the hbq buffer associated with a tag. + * lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag * @phba: Pointer to HBA context object. * @tag: Tag of the hbq buffer. * @@ -966,7 +998,7 @@ lpfc_sli_hbqbuf_find(struct lpfc_hba *ph } /** - * lpfc_sli_free_hbq: Give back the hbq buffer to firmware. + * lpfc_sli_free_hbq - Give back the hbq buffer to firmware * @phba: Pointer to HBA context object. * @hbq_buffer: Pointer to HBQ buffer. * @@ -988,7 +1020,7 @@ lpfc_sli_free_hbq(struct lpfc_hba *phba, } /** - * lpfc_sli_chk_mbx_command: Check if the mailbox is a legitimate mailbox. + * lpfc_sli_chk_mbx_command - Check if the mailbox is a legitimate mailbox * @mbxCommand: mailbox command code. * * This function is called by the mailbox event handler function to verify @@ -1064,8 +1096,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxComm } /** - * lpfc_sli_wake_mbox_wait: Completion handler for mbox issued from - * lpfc_sli_issue_mbox_wait. + * lpfc_sli_wake_mbox_wait - lpfc_sli_issue_mbox_wait mbox completion handler * @phba: Pointer to HBA context object. * @pmboxq: Pointer to mailbox command. * @@ -1096,7 +1127,7 @@ lpfc_sli_wake_mbox_wait(struct lpfc_hba /** - * lpfc_sli_def_mbox_cmpl: Default mailbox completion handler. + * lpfc_sli_def_mbox_cmpl - Default mailbox completion handler * @phba: Pointer to HBA context object. * @pmb: Pointer to mailbox object. * @@ -1140,7 +1171,7 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba * } /** - * lpfc_sli_handle_mb_event: Handle mailbox completions from firmware. + * lpfc_sli_handle_mb_event - Handle mailbox completions from firmware * @phba: Pointer to HBA context object. * * This function is called with no lock held. This function processes all @@ -1260,7 +1291,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba } /** - * lpfc_sli_get_buff: Get the buffer associated with the buffer tag. + * lpfc_sli_get_buff - Get the buffer associated with the buffer tag * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @tag: buffer tag. @@ -1288,7 +1319,7 @@ lpfc_sli_get_buff(struct lpfc_hba *phba, /** - * lpfc_sli_process_unsol_iocb: Unsolicited iocb handler. + * lpfc_sli_process_unsol_iocb - Unsolicited iocb handler * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @saveq: Pointer to the unsolicited iocb. @@ -1484,7 +1515,7 @@ lpfc_sli_process_unsol_iocb(struct lpfc_ } /** - * lpfc_sli_iocbq_lookup: Find command iocb for the given response iocb. + * lpfc_sli_iocbq_lookup - Find command iocb for the given response iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @prspiocb: Pointer to response iocb object. @@ -1521,7 +1552,7 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *p } /** - * lpfc_sli_process_sol_iocb: process solicited iocb completion. + * lpfc_sli_process_sol_iocb - process solicited iocb completion * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @saveq: Pointer to the response iocb to be processed. @@ -1597,7 +1628,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hb * Ring handler: unexpected completion IoTag * */ - lpfc_printf_vlog(cmdiocbp->vport, KERN_WARNING, LOG_SLI, + lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, "0322 Ring %d handler: " "unexpected completion IoTag x%x " "Data: x%x x%x x%x x%x\n", @@ -1614,7 +1645,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hb } /** - * lpfc_sli_rsp_pointers_error: Response ring pointer error handler. + * lpfc_sli_rsp_pointers_error - Response ring pointer error handler * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -1652,7 +1683,7 @@ lpfc_sli_rsp_pointers_error(struct lpfc_ } /** - * lpfc_poll_eratt: Error attention polling timer timeout handler. + * lpfc_poll_eratt - Error attention polling timer timeout handler * @ptr: Pointer to address of HBA context object. * * This function is invoked by the Error Attention polling timer when the @@ -1682,7 +1713,7 @@ void lpfc_poll_eratt(unsigned long ptr) } /** - * lpfc_sli_poll_fcp_ring: Handle FCP ring completion in polling mode. + * lpfc_sli_poll_fcp_ring - Handle FCP ring completion in polling mode * @phba: Pointer to HBA context object. * * This function is called from lpfc_queuecommand, lpfc_poll_timeout, @@ -1845,7 +1876,7 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_ } /** - * lpfc_sli_handle_fast_ring_event: Handle ring events on FCP ring. + * lpfc_sli_handle_fast_ring_event - Handle ring events on FCP ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @mask: Host attention register mask for this ring. @@ -2037,7 +2068,7 @@ lpfc_sli_handle_fast_ring_event(struct l } /** - * lpfc_sli_handle_slow_ring_event: Handle ring events for non-FCP rings. + * lpfc_sli_handle_slow_ring_event - Handle ring events for non-FCP rings * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @mask: Host attention register mask for this ring. @@ -2311,7 +2342,7 @@ lpfc_sli_handle_slow_ring_event(struct l } /** - * lpfc_sli_abort_iocb_ring: Abort all iocbs in the ring. + * lpfc_sli_abort_iocb_ring - Abort all iocbs in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -2325,7 +2356,6 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba { LIST_HEAD(completions); struct lpfc_iocbq *iocb, *next_iocb; - IOCB_t *cmd = NULL; if (pring->ringno == LPFC_ELS_RING) { lpfc_fabric_abort_hba(phba); @@ -2344,23 +2374,13 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } /** - * lpfc_sli_flush_fcp_rings: flush all iocbs in the fcp ring. + * lpfc_sli_flush_fcp_rings - flush all iocbs in the fcp ring * @phba: Pointer to HBA context object. * * This function flushes all iocbs in the fcp ring and frees all the iocb @@ -2374,8 +2394,6 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba { LIST_HEAD(txq); LIST_HEAD(txcmplq); - struct lpfc_iocbq *iocb; - IOCB_t *cmd = NULL; struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; @@ -2393,38 +2411,16 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba spin_unlock_irq(&phba->hbalock); /* Flush the txq */ - while (!list_empty(&txq)) { - iocb = list_get_first(&txq, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); /* Flush the txcmpq */ - while (!list_empty(&txcmplq)) { - iocb = list_get_first(&txcmplq, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); } /** - * lpfc_sli_brdready: Check for host status bits. + * lpfc_sli_brdready - Check for host status bits * @phba: Pointer to HBA context object. * @mask: Bit mask to be checked. * @@ -2484,7 +2480,7 @@ lpfc_sli_brdready(struct lpfc_hba *phba, #define BARRIER_TEST_PATTERN (0xdeadbeef) /** - * lpfc_reset_barrier: Make HBA ready for HBA reset. + * lpfc_reset_barrier - Make HBA ready for HBA reset * @phba: Pointer to HBA context object. * * This function is called before resetting an HBA. This @@ -2564,7 +2560,7 @@ restore_hc: } /** - * lpfc_sli_brdkill: Issue a kill_board mailbox command. + * lpfc_sli_brdkill - Issue a kill_board mailbox command * @phba: Pointer to HBA context object. * * This function issues a kill_board mailbox command and waits for @@ -2651,7 +2647,7 @@ lpfc_sli_brdkill(struct lpfc_hba *phba) } /** - * lpfc_sli_brdreset: Reset the HBA. + * lpfc_sli_brdreset - Reset the HBA * @phba: Pointer to HBA context object. * * This function resets the HBA by writing HC_INITFF to the control @@ -2714,7 +2710,7 @@ lpfc_sli_brdreset(struct lpfc_hba *phba) } /** - * lpfc_sli_brdrestart: Restart the HBA. + * lpfc_sli_brdrestart - Restart the HBA * @phba: Pointer to HBA context object. * * This function is called in the SLI initialization code path to @@ -2781,7 +2777,7 @@ lpfc_sli_brdrestart(struct lpfc_hba *phb } /** - * lpfc_sli_chipset_init: Wait for the restart of the HBA after a restart. + * lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart * @phba: Pointer to HBA context object. * * This function is called after a HBA restart to wait for successful @@ -2876,7 +2872,7 @@ lpfc_sli_chipset_init(struct lpfc_hba *p } /** - * lpfc_sli_hbq_count: Get the number of HBQs to be configured. + * lpfc_sli_hbq_count - Get the number of HBQs to be configured * * This function calculates and returns the number of HBQs required to be * configured. @@ -2888,7 +2884,7 @@ lpfc_sli_hbq_count(void) } /** - * lpfc_sli_hbq_entry_count: Calculate total number of hbq entries. + * lpfc_sli_hbq_entry_count - Calculate total number of hbq entries * * This function adds the number of hbq entries in every HBQ to get * the total number of hbq entries required for the HBA and returns @@ -2907,7 +2903,7 @@ lpfc_sli_hbq_entry_count(void) } /** - * lpfc_sli_hbq_size: Calculate memory required for all hbq entries. + * lpfc_sli_hbq_size - Calculate memory required for all hbq entries * * This function calculates amount of memory required for all hbq entries * to be configured and returns the total memory required. @@ -2919,7 +2915,7 @@ lpfc_sli_hbq_size(void) } /** - * lpfc_sli_hbq_setup: configure and initialize HBQs. + * lpfc_sli_hbq_setup - configure and initialize HBQs * @phba: Pointer to HBA context object. * * This function is called during the SLI initialization to configure @@ -2988,7 +2984,7 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba } /** - * lpfc_sli_config_port: Issue config port mailbox command. + * lpfc_sli_config_port - Issue config port mailbox command * @phba: Pointer to HBA context object. * @sli_mode: sli mode - 2/3 * @@ -3114,7 +3110,7 @@ do_prep_failed: /** - * lpfc_sli_hba_setup: SLI intialization function. + * lpfc_sli_hba_setup - SLI intialization function * @phba: Pointer to HBA context object. * * This function is the main SLI intialization function. This function @@ -3206,7 +3202,7 @@ lpfc_sli_hba_setup_error: /** - * lpfc_mbox_timeout: Timeout call back function for mbox timer. + * lpfc_mbox_timeout - Timeout call back function for mbox timer * @ptr: context object - pointer to hba structure. * * This is the callback function for mailbox timer. The mailbox @@ -3237,7 +3233,7 @@ lpfc_mbox_timeout(unsigned long ptr) /** - * lpfc_mbox_timeout_handler: Worker thread function to handle mailbox timeout. + * lpfc_mbox_timeout_handler - Worker thread function to handle mailbox timeout * @phba: Pointer to HBA context object. * * This function is called from worker thread when a mailbox command times out. @@ -3252,6 +3248,21 @@ lpfc_mbox_timeout_handler(struct lpfc_hb struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; + /* Check the pmbox pointer first. There is a race condition + * between the mbox timeout handler getting executed in the + * worklist and the mailbox actually completing. When this + * race condition occurs, the mbox_active will be NULL. + */ + spin_lock_irq(&phba->hbalock); + if (pmbox == NULL) { + lpfc_printf_log(phba, KERN_WARNING, + LOG_MBOX | LOG_SLI, + "0353 Active Mailbox cleared - mailbox timeout " + "exiting\n"); + spin_unlock_irq(&phba->hbalock); + return; + } + /* Mbox cmd timeout */ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, "0310 Mailbox command x%x timeout Data: x%x x%x x%p\n", @@ -3259,6 +3270,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hb phba->pport->port_state, phba->sli.sli_flag, phba->sli.mbox_active); + spin_unlock_irq(&phba->hbalock); /* Setting state unknown so lpfc_sli_abort_iocb_ring * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing @@ -3295,7 +3307,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hb } /** - * lpfc_sli_issue_mbox: Issue a mailbox command to firmware. + * lpfc_sli_issue_mbox - Issue a mailbox command to firmware * @phba: Pointer to HBA context object. * @pmbox: Pointer to mailbox object. * @flag: Flag indicating how the mailbox need to be processed. @@ -3365,6 +3377,12 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phb goto out_not_finished; } + /* If HBA has a deferred error attention, fail the iocb. */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irqrestore(&phba->hbalock, drvr_flag); + goto out_not_finished; + } + psli = &phba->sli; mb = &pmbox->mb; @@ -3632,7 +3650,7 @@ out_not_finished: } /** - * __lpfc_sli_ringtx_put: Add an iocb to the txq. + * __lpfc_sli_ringtx_put - Add an iocb to the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to address of newly added command iocb. @@ -3651,7 +3669,7 @@ __lpfc_sli_ringtx_put(struct lpfc_hba *p } /** - * lpfc_sli_next_iocb: Get the next iocb in the txq. + * lpfc_sli_next_iocb - Get the next iocb in the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to address of newly added command iocb. @@ -3683,7 +3701,7 @@ lpfc_sli_next_iocb(struct lpfc_hba *phba } /** - * __lpfc_sli_issue_iocb: Lockless version of lpfc_sli_issue_iocb. + * __lpfc_sli_issue_iocb - Lockless version of lpfc_sli_issue_iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to command iocb. @@ -3729,6 +3747,10 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *p if (unlikely(pci_channel_offline(phba->pcidev))) return IOCB_ERROR; + /* If HBA has a deferred error attention, fail the iocb. */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) + return IOCB_ERROR; + /* * We should never get an IOCB if we are in a < LINK_DOWN state */ @@ -3813,7 +3835,7 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *p /** - * lpfc_sli_issue_iocb: Wrapper function for __lpfc_sli_issue_iocb. + * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to command iocb. @@ -3840,7 +3862,7 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phb } /** - * lpfc_extra_ring_setup: Extra ring setup function. + * lpfc_extra_ring_setup - Extra ring setup function * @phba: Pointer to HBA context object. * * This function is called while driver attaches with the @@ -3886,7 +3908,7 @@ lpfc_extra_ring_setup( struct lpfc_hba * } /** - * lpfc_sli_async_event_handler: ASYNC iocb handler function. + * lpfc_sli_async_event_handler - ASYNC iocb handler function * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @iocbq: Pointer to iocb object. @@ -3907,6 +3929,7 @@ lpfc_sli_async_event_handler(struct lpfc uint16_t temp; struct temp_event temp_event_data; struct Scsi_Host *shost; + uint32_t *iocb_w; icmd = &iocbq->iocb; evt_code = icmd->un.asyncstat.evt_code; @@ -3914,13 +3937,23 @@ lpfc_sli_async_event_handler(struct lpfc if ((evt_code != ASYNC_TEMP_WARN) && (evt_code != ASYNC_TEMP_SAFE)) { + iocb_w = (uint32_t *) icmd; lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0346 Ring %d handler: unexpected ASYNC_STATUS" - " evt_code 0x%x\n", + " evt_code 0x%x \n" + "W0 0x%08x W1 0x%08x W2 0x%08x W3 0x%08x\n" + "W4 0x%08x W5 0x%08x W6 0x%08x W7 0x%08x\n" + "W8 0x%08x W9 0x%08x W10 0x%08x W11 0x%08x\n" + "W12 0x%08x W13 0x%08x W14 0x%08x W15 0x%08x\n", pring->ringno, - icmd->un.asyncstat.evt_code); + icmd->un.asyncstat.evt_code, + iocb_w[0], iocb_w[1], iocb_w[2], iocb_w[3], + iocb_w[4], iocb_w[5], iocb_w[6], iocb_w[7], + iocb_w[8], iocb_w[9], iocb_w[10], iocb_w[11], + iocb_w[12], iocb_w[13], iocb_w[14], iocb_w[15]); + return; } temp_event_data.data = (uint32_t)temp; @@ -3954,7 +3987,7 @@ lpfc_sli_async_event_handler(struct lpfc /** - * lpfc_sli_setup: SLI ring setup function. + * lpfc_sli_setup - SLI ring setup function * @phba: Pointer to HBA context object. * * lpfc_sli_setup sets up rings of the SLI interface with @@ -4076,7 +4109,7 @@ lpfc_sli_setup(struct lpfc_hba *phba) } /** - * lpfc_sli_queue_setup: Queue initialization function. + * lpfc_sli_queue_setup - Queue initialization function * @phba: Pointer to HBA context object. * * lpfc_sli_queue_setup sets up mailbox queues and iocb queues for each @@ -4115,7 +4148,7 @@ lpfc_sli_queue_setup(struct lpfc_hba *ph } /** - * lpfc_sli_host_down: Vport cleanup function. + * lpfc_sli_host_down - Vport cleanup function * @vport: Pointer to virtual port object. * * lpfc_sli_host_down is called to clean up the resources @@ -4179,22 +4212,14 @@ lpfc_sli_host_down(struct lpfc_vport *vp spin_unlock_irqrestore(&phba->hbalock, flags); - while (!list_empty(&completions)) { - list_remove_head(&completions, iocb, struct lpfc_iocbq, list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT; - iocb->iocb.un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); return 1; } /** - * lpfc_sli_hba_down: Resource cleanup function for the HBA. + * lpfc_sli_hba_down - Resource cleanup function for the HBA * @phba: Pointer to HBA context object. * * This function cleans up all iocb, buffers, mailbox commands @@ -4216,8 +4241,6 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) struct lpfc_sli_ring *pring; struct lpfc_dmabuf *buf_ptr; LPFC_MBOXQ_t *pmb; - struct lpfc_iocbq *iocb; - IOCB_t *cmd = NULL; int i; unsigned long flags = 0; @@ -4245,18 +4268,9 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) } spin_unlock_irqrestore(&phba->hbalock, flags); - while (!list_empty(&completions)) { - list_remove_head(&completions, iocb, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); spin_lock_irqsave(&phba->hbalock, flags); list_splice_init(&phba->elsbuf, &completions); @@ -4299,7 +4313,7 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) } /** - * lpfc_sli_pcimem_bcopy: SLI memory copy function. + * lpfc_sli_pcimem_bcopy - SLI memory copy function * @srcp: Source memory pointer. * @destp: Destination memory pointer. * @cnt: Number of words required to be copied. @@ -4329,7 +4343,7 @@ lpfc_sli_pcimem_bcopy(void *srcp, void * /** - * lpfc_sli_ringpostbuf_put: Function to add a buffer to postbufq. + * lpfc_sli_ringpostbuf_put - Function to add a buffer to postbufq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @mp: Pointer to driver buffer object. @@ -4352,8 +4366,7 @@ lpfc_sli_ringpostbuf_put(struct lpfc_hba } /** - * lpfc_sli_get_buffer_tag: Tag allocation function for a buffer posted - * using CMD_QUE_XRI64_CX iocb. + * lpfc_sli_get_buffer_tag - allocates a tag for a CMD_QUE_XRI64_CX buffer * @phba: Pointer to HBA context object. * * When HBQ is enabled, buffers are searched based on tags. This function @@ -4378,8 +4391,7 @@ lpfc_sli_get_buffer_tag(struct lpfc_hba } /** - * lpfc_sli_ring_taggedbuf_get: Search HBQ buffer associated with - * posted using CMD_QUE_XRI64_CX iocb. + * lpfc_sli_ring_taggedbuf_get - find HBQ buffer associated with given tag * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @tag: Buffer tag. @@ -4422,8 +4434,7 @@ lpfc_sli_ring_taggedbuf_get(struct lpfc_ } /** - * lpfc_sli_ringpostbuf_get: SLI2 buffer search function for - * unsolicited ct and els events. + * lpfc_sli_ringpostbuf_get - search buffers for unsolicited CT and ELS events * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @phys: DMA address of the buffer. @@ -4466,7 +4477,7 @@ lpfc_sli_ringpostbuf_get(struct lpfc_hba } /** - * lpfc_sli_abort_els_cmpl: Completion handler for the els abort iocbs. + * lpfc_sli_abort_els_cmpl - Completion handler for the els abort iocbs * @phba: Pointer to HBA context object. * @cmdiocb: Pointer to driver command iocb object. * @rspiocb: Pointer to driver response iocb object. @@ -4542,7 +4553,7 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba } /** - * lpfc_ignore_els_cmpl: Completion handler for aborted ELS command. + * lpfc_ignore_els_cmpl - Completion handler for aborted ELS command * @phba: Pointer to HBA context object. * @cmdiocb: Pointer to driver command iocb object. * @rspiocb: Pointer to driver response iocb object. @@ -4572,7 +4583,7 @@ lpfc_ignore_els_cmpl(struct lpfc_hba *ph } /** - * lpfc_sli_issue_abort_iotag: Abort function for a command iocb. + * lpfc_sli_issue_abort_iotag - Abort function for a command iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @cmdiocb: Pointer to driver command iocb object. @@ -4658,15 +4669,14 @@ abort_iotag_exit: } /** - * lpfc_sli_validate_fcp_iocb: Filtering function, used to find commands - * associated with a vport/SCSI target/lun. + * lpfc_sli_validate_fcp_iocb - find commands associated with a vport or LUN * @iocbq: Pointer to driver iocb object. * @vport: Pointer to driver virtual port object. * @tgt_id: SCSI ID of the target. * @lun_id: LUN ID of the scsi device. * @ctx_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST * - * This function acts as iocb filter for functions which abort or count + * This function acts as an iocb filter for functions which abort or count * all FCP iocbs pending on a lun/SCSI target/SCSI host. It will return * 0 if the filtering criteria is met for the given iocb and will return * 1 if the filtering criteria is not met. @@ -4724,7 +4734,7 @@ lpfc_sli_validate_fcp_iocb(struct lpfc_i } /** - * lpfc_sli_sum_iocb: Function to count the number of FCP iocbs pending. + * lpfc_sli_sum_iocb - Function to count the number of FCP iocbs pending * @vport: Pointer to virtual port. * @tgt_id: SCSI ID of the target. * @lun_id: LUN ID of the scsi device. @@ -4762,8 +4772,7 @@ lpfc_sli_sum_iocb(struct lpfc_vport *vpo } /** - * lpfc_sli_abort_fcp_cmpl: Completion handler function for an aborted - * FCP iocb. + * lpfc_sli_abort_fcp_cmpl - Completion handler function for aborted FCP IOCBs * @phba: Pointer to HBA context object * @cmdiocb: Pointer to command iocb object. * @rspiocb: Pointer to response iocb object. @@ -4781,8 +4790,7 @@ lpfc_sli_abort_fcp_cmpl(struct lpfc_hba } /** - * lpfc_sli_abort_iocb: This function issue abort for all SCSI commands - * pending on a SCSI host(vport)/target/lun. + * lpfc_sli_abort_iocb - issue abort for all commands on a host/target/LUN * @vport: Pointer to virtual port. * @pring: Pointer to driver SLI ring object. * @tgt_id: SCSI ID of the target. @@ -4854,8 +4862,7 @@ lpfc_sli_abort_iocb(struct lpfc_vport *v } /** - * lpfc_sli_wake_iocb_wait: iocb completion handler for iocb issued using - * lpfc_sli_issue_iocb_wait. + * lpfc_sli_wake_iocb_wait - lpfc_sli_issue_iocb_wait's completion handler * @phba: Pointer to HBA context object. * @cmdiocbq: Pointer to command iocb. * @rspiocbq: Pointer to response iocb. @@ -4893,7 +4900,7 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba } /** - * lpfc_sli_issue_iocb_wait: Synchronous function to issue iocb commands. + * lpfc_sli_issue_iocb_wait - Synchronous function to issue iocb commands * @phba: Pointer to HBA context object.. * @pring: Pointer to sli ring. * @piocb: Pointer to command iocb. @@ -5000,7 +5007,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba } /** - * lpfc_sli_issue_mbox_wait: Synchronous function to issue mailbox. + * lpfc_sli_issue_mbox_wait - Synchronous function to issue mailbox * @phba: Pointer to HBA context object. * @pmboxq: Pointer to driver mailbox object. * @timeout: Timeout in number of seconds. @@ -5070,7 +5077,7 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba } /** - * lpfc_sli_flush_mbox_queue: mailbox queue cleanup function. + * lpfc_sli_flush_mbox_queue - mailbox queue cleanup function * @phba: Pointer to HBA context. * * This function is called to cleanup any pending mailbox @@ -5113,7 +5120,7 @@ lpfc_sli_flush_mbox_queue(struct lpfc_hb } /** - * lpfc_sli_check_eratt: check error attention events + * lpfc_sli_check_eratt - check error attention events * @phba: Pointer to HBA context. * * This function is called form timer soft interrupt context to check HBA's @@ -5145,11 +5152,31 @@ lpfc_sli_check_eratt(struct lpfc_hba *ph return 0; } + /* + * If there is deferred error attention, do not check for error + * attention + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return 0; + } + /* Read chip Host Attention (HA) register */ ha_copy = readl(phba->HAregaddr); if (ha_copy & HA_ERATT) { /* Read host status register to retrieve error event */ lpfc_sli_read_hs(phba); + + /* Check if there is a deferred error condition is active */ + if ((HS_FFER1 & phba->work_hs) && + ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 | + HS_FFER6 | HS_FFER7) & phba->work_hs)) { + phba->hba_flag |= DEFER_ERATT; + /* Clear all interrupt enable conditions */ + writel(0, phba->HCregaddr); + readl(phba->HCregaddr); + } + /* Set the driver HA work bitmap */ phba->work_ha |= HA_ERATT; /* Indicate polling handles this ERATT */ @@ -5162,7 +5189,7 @@ lpfc_sli_check_eratt(struct lpfc_hba *ph } /** - * lpfc_sp_intr_handler: The slow-path interrupt handler of lpfc driver. + * lpfc_sp_intr_handler - The slow-path interrupt handler of lpfc driver * @irq: Interrupt number. * @dev_id: The device context pointer. * @@ -5238,6 +5265,16 @@ lpfc_sp_intr_handler(int irq, void *dev_ /* Indicate interrupt handler handles ERATT */ phba->hba_flag |= HBA_ERATT_HANDLED; } + + /* + * If there is deferred error attention, do not check for any + * interrupt. + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return IRQ_NONE; + } + /* Clear up only attention source related to slow-path */ writel((ha_copy & (HA_MBATT | HA_R2_CLR_MSK)), phba->HAregaddr); @@ -5309,8 +5346,22 @@ lpfc_sp_intr_handler(int irq, void *dev_ } } spin_lock_irqsave(&phba->hbalock, iflag); - if (work_ha_copy & HA_ERATT) + if (work_ha_copy & HA_ERATT) { lpfc_sli_read_hs(phba); + /* + * Check if there is a deferred error condition + * is active + */ + if ((HS_FFER1 & phba->work_hs) && + ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 | + HS_FFER6 | HS_FFER7) & phba->work_hs)) { + phba->hba_flag |= DEFER_ERATT; + /* Clear all interrupt enable conditions */ + writel(0, phba->HCregaddr); + readl(phba->HCregaddr); + } + } + if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) { pmb = phba->sli.mbox_active; pmbox = &pmb->mb; @@ -5423,7 +5474,7 @@ send_current_mbox: } /* lpfc_sp_intr_handler */ /** - * lpfc_fp_intr_handler: The fast-path interrupt handler of lpfc driver. + * lpfc_fp_intr_handler - The fast-path interrupt handler of lpfc driver * @irq: Interrupt number. * @dev_id: The device context pointer. * @@ -5474,6 +5525,14 @@ lpfc_fp_intr_handler(int irq, void *dev_ ha_copy = readl(phba->HAregaddr); /* Clear up only attention source related to fast-path */ spin_lock_irqsave(&phba->hbalock, iflag); + /* + * If there is deferred error attention, do not check for + * any interrupt. + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return IRQ_NONE; + } writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)), phba->HAregaddr); readl(phba->HAregaddr); /* flush */ @@ -5510,7 +5569,7 @@ lpfc_fp_intr_handler(int irq, void *dev_ } /* lpfc_fp_intr_handler */ /** - * lpfc_intr_handler: The device-level interrupt handler of lpfc driver. + * lpfc_intr_handler - The device-level interrupt handler of lpfc driver * @irq: Interrupt number. * @dev_id: The device context pointer. * @@ -5566,6 +5625,14 @@ lpfc_intr_handler(int irq, void *dev_id) phba->hba_flag |= HBA_ERATT_HANDLED; } + /* + * If there is deferred error attention, do not check for any interrupt. + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return IRQ_NONE; + } + /* Clear attention sources except link and error attentions */ writel((phba->ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr); readl(phba->HAregaddr); /* flush */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_version.h linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_version.h --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_version.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_version.h 2009-05-13 09:46:19.000000000 +0200 @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2008 Emulex. All rights reserved. * + * Copyright (C) 2004-2009 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.3.0" +#define LPFC_DRIVER_VERSION "8.3.1" #define LPFC_DRIVER_NAME "lpfc" #define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp" @@ -26,4 +26,4 @@ #define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \ LPFC_DRIVER_VERSION -#define LPFC_COPYRIGHT "Copyright(c) 2004-2008 Emulex. All rights reserved." +#define LPFC_COPYRIGHT "Copyright(c) 2004-2009 Emulex. All rights reserved." diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_vport.c linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_vport.c --- linux-2.6.30-rc4/drivers/scsi/lpfc/lpfc_vport.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/lpfc/lpfc_vport.c 2009-05-13 09:46:19.000000000 +0200 @@ -206,7 +206,7 @@ lpfc_unique_wwpn(struct lpfc_hba *phba, } /** - * lpfc_discovery_wait: Wait for driver discovery to quiesce. + * lpfc_discovery_wait - Wait for driver discovery to quiesce * @vport: The virtual port for which this call is being executed. * * This driver calls this routine specifically from lpfc_vport_delete @@ -741,7 +741,7 @@ lpfc_destroy_vport_work_array(struct lpf /** - * lpfc_vport_reset_stat_data: Reset the statistical data for the vport. + * lpfc_vport_reset_stat_data - Reset the statistical data for the vport * @vport: Pointer to vport object. * * This function resets the statistical data for the vport. This function @@ -763,8 +763,7 @@ lpfc_vport_reset_stat_data(struct lpfc_v /** - * lpfc_alloc_bucket: Allocate data buffer required for collecting - * statistical data. + * lpfc_alloc_bucket - Allocate data buffer required for statistical data * @vport: Pointer to vport object. * * This function allocates data buffer required for all the FC @@ -797,8 +796,7 @@ lpfc_alloc_bucket(struct lpfc_vport *vpo } /** - * lpfc_free_bucket: Free data buffer required for collecting - * statistical data. + * lpfc_free_bucket - Free data buffer required for statistical data * @vport: Pointer to vport object. * * Th function frees statistical data buffer of all the FC diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/mpt2sas/mpt2sas_base.c linux-2.6.30-rc4-git/drivers/scsi/mpt2sas/mpt2sas_base.c --- linux-2.6.30-rc4/drivers/scsi/mpt2sas/mpt2sas_base.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/mpt2sas/mpt2sas_base.c 2009-05-13 09:46:19.000000000 +0200 @@ -636,6 +636,14 @@ _base_unmask_interrupts(struct MPT2SAS_A static irqreturn_t _base_interrupt(int irq, void *bus_id) { + union reply_descriptor { + u64 word; + struct { + u32 low; + u32 high; + } u; + }; + union reply_descriptor rd; u32 post_index, post_index_next, completed_cmds; u8 request_desript_type; u16 smid; @@ -656,7 +664,8 @@ _base_interrupt(int irq, void *bus_id) completed_cmds = 0; do { - if (ioc->reply_post_free[post_index].Words == ~0ULL) + rd.word = ioc->reply_post_free[post_index].Words; + if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX) goto out; reply = 0; cb_idx = 0xFF; @@ -721,7 +730,7 @@ _base_interrupt(int irq, void *bus_id) for (i = 0 ; i < completed_cmds; i++) { post_index = post_index_next; /* poison the reply post descriptor */ - ioc->reply_post_free[post_index_next].Words = ~0ULL; + ioc->reply_post_free[post_index_next].Words = ULLONG_MAX; post_index_next = (post_index == (ioc->reply_post_queue_depth - 1)) ? 0 : post_index + 1; @@ -1387,6 +1396,64 @@ mpt2sas_base_put_smid_target_assist(stru } /** + * _base_display_dell_branding - Disply branding string + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc) +{ + char dell_branding[MPT2SAS_DELL_BRANDING_SIZE]; + + if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL) + return; + + memset(dell_branding, 0, MPT2SAS_DELL_BRANDING_SIZE); + switch (ioc->pdev->subsystem_device) { + case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID: + strncpy(dell_branding, + MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID: + strncpy(dell_branding, + MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID: + strncpy(dell_branding, + MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_6GBPS_SAS_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + default: + sprintf(dell_branding, "0x%4X", ioc->pdev->subsystem_device); + break; + } + + printk(MPT2SAS_INFO_FMT "%s: Vendor(0x%04X), Device(0x%04X)," + " SSVID(0x%04X), SSDID(0x%04X)\n", ioc->name, dell_branding, + ioc->pdev->vendor, ioc->pdev->device, ioc->pdev->subsystem_vendor, + ioc->pdev->subsystem_device); +} + +/** * _base_display_ioc_capabilities - Disply IOC's capabilities. * @ioc: per adapter object * @@ -1427,6 +1494,8 @@ _base_display_ioc_capabilities(struct MP i++; } + _base_display_dell_branding(ioc); + i = 0; printk("), "); printk("Capabilities=("); @@ -3068,7 +3137,7 @@ _base_make_ioc_operational(struct MPT2SA /* initialize Reply Post Free Queue */ for (i = 0; i < ioc->reply_post_queue_depth; i++) - ioc->reply_post_free[i].Words = ~0ULL; + ioc->reply_post_free[i].Words = ULLONG_MAX; r = _base_send_ioc_init(ioc, VF_ID, sleep_flag); if (r) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/mpt2sas/mpt2sas_base.h linux-2.6.30-rc4-git/drivers/scsi/mpt2sas/mpt2sas_base.h --- linux-2.6.30-rc4/drivers/scsi/mpt2sas/mpt2sas_base.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/mpt2sas/mpt2sas_base.h 2009-05-13 09:46:19.000000000 +0200 @@ -68,11 +68,11 @@ #define MPT2SAS_DRIVER_NAME "mpt2sas" #define MPT2SAS_AUTHOR "LSI Corporation " #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" -#define MPT2SAS_DRIVER_VERSION "00.100.11.16" +#define MPT2SAS_DRIVER_VERSION "01.100.02.00" #define MPT2SAS_MAJOR_VERSION 00 #define MPT2SAS_MINOR_VERSION 100 -#define MPT2SAS_BUILD_VERSION 11 -#define MPT2SAS_RELEASE_VERSION 16 +#define MPT2SAS_BUILD_VERSION 02 +#define MPT2SAS_RELEASE_VERSION 00 /* * Set MPT2SAS_SG_DEPTH value based on user input. @@ -130,6 +130,30 @@ #define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT /* + * Dell HBA branding + */ +#define MPT2SAS_DELL_BRANDING_SIZE 32 + +#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA" +#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter" +#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated" +#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular" +#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded" +#define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200" +#define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS" + +/* + * Dell HBA SSDIDs + */ +#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C +#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D +#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E +#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F +#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20 +#define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21 +#define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22 + +/* * per target private data */ #define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01 diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/mpt2sas/mpt2sas_ctl.c linux-2.6.30-rc4-git/drivers/scsi/mpt2sas/mpt2sas_ctl.c --- linux-2.6.30-rc4/drivers/scsi/mpt2sas/mpt2sas_ctl.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/mpt2sas/mpt2sas_ctl.c 2009-05-13 09:46:19.000000000 +0200 @@ -64,6 +64,9 @@ static struct fasync_struct *async_queue; static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait); +static int _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, + u8 *issue_reset); + /** * enum block_state - blocking state * @NON_BLOCKING: non blocking @@ -378,10 +381,22 @@ _ctl_verify_adapter(int ioc_number, stru void mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) { + int i; + u8 issue_reset; + switch (reset_phase) { case MPT2_IOC_PRE_RESET: dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); + for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { + if (!(ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_REGISTERED)) + continue; + if ((ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_RELEASED)) + continue; + _ctl_send_release(ioc, i, &issue_reset); + } break; case MPT2_IOC_AFTER_RESET: dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " @@ -395,6 +410,17 @@ mpt2sas_ctl_reset_handler(struct MPT2SAS case MPT2_IOC_DONE_RESET: dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); + + for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { + if (!(ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_REGISTERED)) + continue; + if ((ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_RELEASED)) + continue; + ioc->diag_buffer_status[i] |= + MPT2_DIAG_BUFFER_IS_DIAG_RESET; + } break; } } @@ -714,8 +740,10 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPT if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) { - if (_ctl_do_task_abort(ioc, &karg, tm_request)) + if (_ctl_do_task_abort(ioc, &karg, tm_request)) { + mpt2sas_base_free_smid(ioc, smid); goto out; + } } mutex_lock(&ioc->tm_cmds.mutex); @@ -915,9 +943,9 @@ _ctl_getiocinfo(void __user *arg) karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn); karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus); karg.firmware_version = ioc->facts.FWVersion.Word; - strncpy(karg.driver_version, MPT2SAS_DRIVER_VERSION, - MPT2_IOCTL_VERSION_LENGTH); - karg.driver_version[MPT2_IOCTL_VERSION_LENGTH - 1] = '\0'; + strcpy(karg.driver_version, MPT2SAS_DRIVER_NAME); + strcat(karg.driver_version, "-"); + strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION); karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion); if (copy_to_user(arg, &karg, sizeof(karg))) { @@ -1551,81 +1579,38 @@ _ctl_diag_query(void __user *arg) } /** - * _ctl_diag_release - request to send Diag Release Message to firmware - * @arg - user space buffer containing ioctl content - * @state - NON_BLOCKING or BLOCKING + * _ctl_send_release - Diag Release Message + * @ioc: per adapter object + * @buffer_type - specifies either TRACE or SNAPSHOT + * @issue_reset - specifies whether host reset is required. * - * This allows ownership of the specified buffer to returned to the driver, - * allowing an application to read the buffer without fear that firmware is - * overwritting information in the buffer. */ -static long -_ctl_diag_release(void __user *arg, enum block_state state) +static int +_ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset) { - struct mpt2_diag_release karg; - struct MPT2SAS_ADAPTER *ioc; - void *request_data; - int rc; Mpi2DiagReleaseRequest_t *mpi_request; Mpi2DiagReleaseReply_t *mpi_reply; - u8 buffer_type; - unsigned long timeleft; u16 smid; u16 ioc_status; - u8 issue_reset = 0; - - if (copy_from_user(&karg, arg, sizeof(karg))) { - printk(KERN_ERR "failure at %s:%d/%s()!\n", - __FILE__, __LINE__, __func__); - return -EFAULT; - } - if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) - return -ENODEV; + u32 ioc_state; + int rc; + unsigned long timeleft; dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, __func__)); - buffer_type = karg.unique_id & 0x000000ff; - if (!_ctl_diag_capability(ioc, buffer_type)) { - printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " - "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); - return -EPERM; - } - - if ((ioc->diag_buffer_status[buffer_type] & - MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { - printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " - "registered\n", ioc->name, __func__, buffer_type); - return -EINVAL; - } - - if (karg.unique_id != ioc->unique_id[buffer_type]) { - printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " - "registered\n", ioc->name, __func__, karg.unique_id); - return -EINVAL; - } - - if (ioc->diag_buffer_status[buffer_type] & - MPT2_DIAG_BUFFER_IS_RELEASED) { - printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " - "is already released\n", ioc->name, __func__, - buffer_type); - return 0; - } - - request_data = ioc->diag_buffer[buffer_type]; + rc = 0; + *issue_reset = 0; - if (!request_data) { - printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for " - "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); - return -ENOMEM; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "skipping due to FAULT state\n", ioc->name, + __func__)); + rc = -EAGAIN; + goto out; } - if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) - return -EAGAIN; - else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) - return -ERESTARTSYS; - if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", ioc->name, __func__); @@ -1641,7 +1626,6 @@ _ctl_diag_release(void __user *arg, enum goto out; } - rc = 0; ioc->ctl_cmds.status = MPT2_CMD_PENDING; memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); @@ -1660,8 +1644,9 @@ _ctl_diag_release(void __user *arg, enum _debug_dump_mf(mpi_request, sizeof(Mpi2DiagReleaseRequest_t)/4); if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) - issue_reset = 1; - goto issue_host_reset; + *issue_reset = 1; + rc = -EFAULT; + goto out; } /* process the completed Reply Message Frame */ @@ -1687,14 +1672,101 @@ _ctl_diag_release(void __user *arg, enum rc = -EFAULT; } - issue_host_reset: + out: + ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; + return rc; +} + +/** + * _ctl_diag_release - request to send Diag Release Message to firmware + * @arg - user space buffer containing ioctl content + * @state - NON_BLOCKING or BLOCKING + * + * This allows ownership of the specified buffer to returned to the driver, + * allowing an application to read the buffer without fear that firmware is + * overwritting information in the buffer. + */ +static long +_ctl_diag_release(void __user *arg, enum block_state state) +{ + struct mpt2_diag_release karg; + struct MPT2SAS_ADAPTER *ioc; + void *request_data; + int rc; + u8 buffer_type; + u8 issue_reset = 0; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + buffer_type = karg.unique_id & 0x000000ff; + if (!_ctl_diag_capability(ioc, buffer_type)) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -EPERM; + } + + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " + "registered\n", ioc->name, __func__, buffer_type); + return -EINVAL; + } + + if (karg.unique_id != ioc->unique_id[buffer_type]) { + printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " + "registered\n", ioc->name, __func__, karg.unique_id); + return -EINVAL; + } + + if (ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_RELEASED) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " + "is already released\n", ioc->name, __func__, + buffer_type); + return 0; + } + + request_data = ioc->diag_buffer[buffer_type]; + + if (!request_data) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + /* buffers were released by due to host reset */ + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_DIAG_RESET)) { + ioc->diag_buffer_status[buffer_type] |= + MPT2_DIAG_BUFFER_IS_RELEASED; + ioc->diag_buffer_status[buffer_type] &= + ~MPT2_DIAG_BUFFER_IS_DIAG_RESET; + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " + "was released due to host reset\n", ioc->name, __func__, + buffer_type); + return 0; + } + + if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) + return -EAGAIN; + else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) + return -ERESTARTSYS; + + rc = _ctl_send_release(ioc, buffer_type, &issue_reset); + if (issue_reset) mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); - out: - - ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; mutex_unlock(&ioc->ctl_cmds.mutex); return rc; } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/mpt2sas/mpt2sas_ctl.h linux-2.6.30-rc4-git/drivers/scsi/mpt2sas/mpt2sas_ctl.h --- linux-2.6.30-rc4/drivers/scsi/mpt2sas/mpt2sas_ctl.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/mpt2sas/mpt2sas_ctl.h 2009-05-13 09:46:19.000000000 +0200 @@ -50,7 +50,7 @@ #endif #define MPT2SAS_DEV_NAME "mpt2ctl" -#define MPT2_MAGIC_NUMBER 'm' +#define MPT2_MAGIC_NUMBER 'L' #define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */ /** @@ -295,8 +295,9 @@ struct mpt2_ioctl_btdh_mapping { /* status bits for ioc->diag_buffer_status */ -#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01) -#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02) +#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01) +#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02) +#define MPT2_DIAG_BUFFER_IS_DIAG_RESET (0x04) /* application flags for mpt2_diag_register, mpt2_diag_query */ #define MPT2_APP_FLAGS_APP_OWNED (0x0001) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/mpt2sas/mpt2sas_scsih.c linux-2.6.30-rc4-git/drivers/scsi/mpt2sas/mpt2sas_scsih.c --- linux-2.6.30-rc4/drivers/scsi/mpt2sas/mpt2sas_scsih.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/mpt2sas/mpt2sas_scsih.c 2009-05-13 09:46:19.000000000 +0200 @@ -119,7 +119,7 @@ struct sense_info { */ struct fw_event_work { struct list_head list; - struct delayed_work work; + struct work_struct work; struct MPT2SAS_ADAPTER *ioc; u8 VF_ID; u8 host_reset_handling; @@ -516,12 +516,8 @@ _scsih_sas_device_add(struct MPT2SAS_ADA handle = sas_device->handle; parent_handle = sas_device->parent_handle; sas_address = sas_device->sas_address; - if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) { + if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) _scsih_sas_device_remove(ioc, sas_device); - } else if (!sas_device->starget) { - mpt2sas_transport_port_remove(ioc, sas_address, parent_handle); - _scsih_sas_device_remove(ioc, sas_device); - } } /** @@ -1203,7 +1199,9 @@ scsih_target_destroy(struct scsi_target rphy = dev_to_rphy(starget->dev.parent); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, rphy->identify.sas_address); - if (sas_device) + if (sas_device && (sas_device->starget == starget) && + (sas_device->id == starget->id) && + (sas_device->channel == starget->channel)) sas_device->starget = NULL; spin_unlock_irqrestore(&ioc->sas_device_lock, flags); @@ -2009,8 +2007,8 @@ _scsih_fw_event_add(struct MPT2SAS_ADAPT spin_lock_irqsave(&ioc->fw_event_lock, flags); list_add_tail(&fw_event->list, &ioc->fw_event_list); - INIT_DELAYED_WORK(&fw_event->work, _firmware_event_work); - queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, 1); + INIT_WORK(&fw_event->work, _firmware_event_work); + queue_work(ioc->firmware_event_thread, &fw_event->work); spin_unlock_irqrestore(&ioc->fw_event_lock, flags); } @@ -2054,7 +2052,7 @@ _scsih_fw_event_requeue(struct MPT2SAS_A return; spin_lock_irqsave(&ioc->fw_event_lock, flags); - queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, delay); + queue_work(ioc->firmware_event_thread, &fw_event->work); spin_unlock_irqrestore(&ioc->fw_event_lock, flags); } @@ -2863,8 +2861,9 @@ scsih_io_done(struct MPT2SAS_ADAPTER *io struct sense_info data; const void *sense_data = mpt2sas_base_get_sense_buffer(ioc, smid); - memcpy(scmd->sense_buffer, sense_data, + u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE, le32_to_cpu(mpi_reply->SenseCount)); + memcpy(scmd->sense_buffer, sense_data, sz); _scsih_normalize_sense(scmd->sense_buffer, &data); /* failure prediction threshold exceeded */ if (data.asc == 0x5D) @@ -3923,7 +3922,7 @@ _scsih_sas_broadcast_primative_event(str mpt2sas_scsih_issue_tm(ioc, handle, lun, MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30); - termination_count += le32_to_cpu(mpi_reply->TerminationCount); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) && (mpi_reply->ResponseCode == @@ -3933,10 +3932,10 @@ _scsih_sas_broadcast_primative_event(str continue; mpt2sas_scsih_issue_tm(ioc, handle, lun, - MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, smid, 30); + MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; termination_count += le32_to_cpu(mpi_reply->TerminationCount); } - ioc->tm_cmds.status = MPT2_CMD_NOT_USED; ioc->broadcast_aen_busy = 0; mutex_unlock(&ioc->tm_cmds.mutex); @@ -4962,7 +4961,7 @@ static void _firmware_event_work(struct work_struct *work) { struct fw_event_work *fw_event = container_of(work, - struct fw_event_work, work.work); + struct fw_event_work, work); unsigned long flags; struct MPT2SAS_ADAPTER *ioc = fw_event->ioc; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/osd/osd_initiator.c linux-2.6.30-rc4-git/drivers/scsi/osd/osd_initiator.c --- linux-2.6.30-rc4/drivers/scsi/osd/osd_initiator.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/osd/osd_initiator.c 2009-05-13 09:46:19.000000000 +0200 @@ -205,6 +205,74 @@ static unsigned _osd_req_alist_elem_size osdv2_attr_list_elem_size(len); } +static void _osd_req_alist_elem_encode(struct osd_request *or, + void *attr_last, const struct osd_attr *oa) +{ + if (osd_req_is_ver1(or)) { + struct osdv1_attributes_list_element *attr = attr_last; + + attr->attr_page = cpu_to_be32(oa->attr_page); + attr->attr_id = cpu_to_be32(oa->attr_id); + attr->attr_bytes = cpu_to_be16(oa->len); + memcpy(attr->attr_val, oa->val_ptr, oa->len); + } else { + struct osdv2_attributes_list_element *attr = attr_last; + + attr->attr_page = cpu_to_be32(oa->attr_page); + attr->attr_id = cpu_to_be32(oa->attr_id); + attr->attr_bytes = cpu_to_be16(oa->len); + memcpy(attr->attr_val, oa->val_ptr, oa->len); + } +} + +static int _osd_req_alist_elem_decode(struct osd_request *or, + void *cur_p, struct osd_attr *oa, unsigned max_bytes) +{ + unsigned inc; + if (osd_req_is_ver1(or)) { + struct osdv1_attributes_list_element *attr = cur_p; + + if (max_bytes < sizeof(*attr)) + return -1; + + oa->len = be16_to_cpu(attr->attr_bytes); + inc = _osd_req_alist_elem_size(or, oa->len); + if (inc > max_bytes) + return -1; + + oa->attr_page = be32_to_cpu(attr->attr_page); + oa->attr_id = be32_to_cpu(attr->attr_id); + + /* OSD1: On empty attributes we return a pointer to 2 bytes + * of zeros. This keeps similar behaviour with OSD2. + * (See below) + */ + oa->val_ptr = likely(oa->len) ? attr->attr_val : + (u8 *)&attr->attr_bytes; + } else { + struct osdv2_attributes_list_element *attr = cur_p; + + if (max_bytes < sizeof(*attr)) + return -1; + + oa->len = be16_to_cpu(attr->attr_bytes); + inc = _osd_req_alist_elem_size(or, oa->len); + if (inc > max_bytes) + return -1; + + oa->attr_page = be32_to_cpu(attr->attr_page); + oa->attr_id = be32_to_cpu(attr->attr_id); + + /* OSD2: For convenience, on empty attributes, we return 8 bytes + * of zeros here. This keeps the same behaviour with OSD2r04, + * and is nice with null terminating ASCII fields. + * oa->val_ptr == NULL marks the end-of-list, or error. + */ + oa->val_ptr = likely(oa->len) ? attr->attr_val : attr->reserved; + } + return inc; +} + static unsigned _osd_req_alist_size(struct osd_request *or, void *list_head) { return osd_req_is_ver1(or) ? @@ -282,9 +350,9 @@ _osd_req_sec_params(struct osd_request * struct osd_cdb *ocdb = &or->cdb; if (osd_req_is_ver1(or)) - return &ocdb->v1.sec_params; + return (struct osd_security_parameters *)&ocdb->v1.sec_params; else - return &ocdb->v2.sec_params; + return (struct osd_security_parameters *)&ocdb->v2.sec_params; } void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device) @@ -612,9 +680,9 @@ static int _osd_req_list_objects(struct WARN_ON(or->in.bio); bio = bio_map_kern(q, list, len, or->alloc_flags); - if (!bio) { + if (IS_ERR(bio)) { OSD_ERR("!!! Failed to allocate list_objects BIO\n"); - return -ENOMEM; + return PTR_ERR(bio); } bio->bi_rw &= ~(1 << BIO_RW); @@ -798,7 +866,6 @@ int osd_req_add_set_attr_list(struct osd attr_last = or->set_attr.buff + total_bytes; for (; nelem; --nelem) { - struct osd_attributes_list_element *attr; unsigned elem_size = _osd_req_alist_elem_size(or, oa->len); total_bytes += elem_size; @@ -811,11 +878,7 @@ int osd_req_add_set_attr_list(struct osd or->set_attr.buff + or->set_attr.total_bytes; } - attr = attr_last; - attr->attr_page = cpu_to_be32(oa->attr_page); - attr->attr_id = cpu_to_be32(oa->attr_id); - attr->attr_bytes = cpu_to_be16(oa->len); - memcpy(attr->attr_val, oa->val_ptr, oa->len); + _osd_req_alist_elem_encode(or, attr_last, oa); attr_last += elem_size; ++oa; @@ -1070,15 +1133,10 @@ int osd_req_decode_get_attr_list(struct } for (n = 0; (n < *nelem) && (cur_bytes < returned_bytes); ++n) { - struct osd_attributes_list_element *attr = cur_p; - unsigned inc; + int inc = _osd_req_alist_elem_decode(or, cur_p, oa, + returned_bytes - cur_bytes); - oa->len = be16_to_cpu(attr->attr_bytes); - inc = _osd_req_alist_elem_size(or, oa->len); - OSD_DEBUG("oa->len=%d inc=%d cur_bytes=%d\n", - oa->len, inc, cur_bytes); - cur_bytes += inc; - if (cur_bytes > returned_bytes) { + if (inc < 0) { OSD_ERR("BAD FOOD from target. list not valid!" "c=%d r=%d n=%d\n", cur_bytes, returned_bytes, n); @@ -1086,10 +1144,7 @@ int osd_req_decode_get_attr_list(struct break; } - oa->attr_page = be32_to_cpu(attr->attr_page); - oa->attr_id = be32_to_cpu(attr->attr_id); - oa->val_ptr = attr->attr_val; - + cur_bytes += inc; cur_p += inc; ++oa; } @@ -1159,6 +1214,24 @@ static int _osd_req_finalize_attr_page(s return ret; } +static inline void osd_sec_parms_set_out_offset(bool is_v1, + struct osd_security_parameters *sec_parms, osd_cdb_offset offset) +{ + if (is_v1) + sec_parms->v1.data_out_integrity_check_offset = offset; + else + sec_parms->v2.data_out_integrity_check_offset = offset; +} + +static inline void osd_sec_parms_set_in_offset(bool is_v1, + struct osd_security_parameters *sec_parms, osd_cdb_offset offset) +{ + if (is_v1) + sec_parms->v1.data_in_integrity_check_offset = offset; + else + sec_parms->v2.data_in_integrity_check_offset = offset; +} + static int _osd_req_finalize_data_integrity(struct osd_request *or, bool has_in, bool has_out, const u8 *cap_key) { @@ -1182,8 +1255,8 @@ static int _osd_req_finalize_data_integr or->out_data_integ.get_attributes_bytes = cpu_to_be64( or->enc_get_attr.total_bytes); - sec_parms->data_out_integrity_check_offset = - osd_req_encode_offset(or, or->out.total_bytes, &pad); + osd_sec_parms_set_out_offset(osd_req_is_ver1(or), sec_parms, + osd_req_encode_offset(or, or->out.total_bytes, &pad)); ret = _req_append_segment(or, pad, &seg, or->out.last_seg, &or->out); @@ -1203,8 +1276,8 @@ static int _osd_req_finalize_data_integr }; unsigned pad; - sec_parms->data_in_integrity_check_offset = - osd_req_encode_offset(or, or->in.total_bytes, &pad); + osd_sec_parms_set_in_offset(osd_req_is_ver1(or), sec_parms, + osd_req_encode_offset(or, or->in.total_bytes, &pad)); ret = _req_append_segment(or, pad, &seg, or->in.last_seg, &or->in); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/scsi_lib.c linux-2.6.30-rc4-git/drivers/scsi/scsi_lib.c --- linux-2.6.30-rc4/drivers/scsi/scsi_lib.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/scsi_lib.c 2009-05-13 09:46:19.000000000 +0200 @@ -1291,10 +1291,8 @@ static inline int scsi_target_queue_read if (--starget->target_blocked == 0) { SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget, "unblocking target at zero depth\n")); - } else { - blk_plug_device(sdev->request_queue); + } else return 0; - } } if (scsi_target_is_busy(starget)) { diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/sd.c linux-2.6.30-rc4-git/drivers/scsi/sd.c --- linux-2.6.30-rc4/drivers/scsi/sd.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/sd.c 2009-05-13 09:46:19.000000000 +0200 @@ -50,6 +50,7 @@ #include #include #include +#include #include #include @@ -1344,12 +1345,8 @@ static int read_capacity_16(struct scsi_ return -EINVAL; } - sector_size = (buffer[8] << 24) | (buffer[9] << 16) | - (buffer[10] << 8) | buffer[11]; - lba = (((u64)buffer[0] << 56) | ((u64)buffer[1] << 48) | - ((u64)buffer[2] << 40) | ((u64)buffer[3] << 32) | - ((u64)buffer[4] << 24) | ((u64)buffer[5] << 16) | - ((u64)buffer[6] << 8) | (u64)buffer[7]); + sector_size = get_unaligned_be32(&buffer[8]); + lba = get_unaligned_be64(&buffer[0]); sd_read_protection_type(sdkp, buffer); @@ -1400,10 +1397,8 @@ static int read_capacity_10(struct scsi_ return -EINVAL; } - sector_size = (buffer[4] << 24) | (buffer[5] << 16) | - (buffer[6] << 8) | buffer[7]; - lba = (buffer[0] << 24) | (buffer[1] << 16) | - (buffer[2] << 8) | buffer[3]; + sector_size = get_unaligned_be32(&buffer[4]); + lba = get_unaligned_be32(&buffer[0]); if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) { sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a " diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/sg.c linux-2.6.30-rc4-git/drivers/scsi/sg.c --- linux-2.6.30-rc4/drivers/scsi/sg.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/sg.c 2009-05-13 09:46:19.000000000 +0200 @@ -179,7 +179,7 @@ typedef struct sg_device { /* holds the /* tasklet or soft irq callback */ static void sg_rq_end_io(struct request *rq, int uptodate); static int sg_start_req(Sg_request *srp, unsigned char *cmd); -static void sg_finish_rem_req(Sg_request * srp); +static int sg_finish_rem_req(Sg_request * srp); static int sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size); static ssize_t sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp); @@ -518,7 +518,7 @@ sg_new_read(Sg_fd * sfp, char __user *bu goto err_out; } err_out: - sg_finish_rem_req(srp); + err = sg_finish_rem_req(srp); return (0 == err) ? count : err; } @@ -1696,9 +1696,10 @@ static int sg_start_req(Sg_request *srp, return res; } -static void -sg_finish_rem_req(Sg_request * srp) +static int sg_finish_rem_req(Sg_request * srp) { + int ret = 0; + Sg_fd *sfp = srp->parentfp; Sg_scatter_hold *req_schp = &srp->data; @@ -1710,12 +1711,14 @@ sg_finish_rem_req(Sg_request * srp) if (srp->rq) { if (srp->bio) - blk_rq_unmap_user(srp->bio); + ret = blk_rq_unmap_user(srp->bio); blk_put_request(srp->rq); } sg_remove_request(sfp, srp); + + return ret; } static int diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/scsi/sr_ioctl.c linux-2.6.30-rc4-git/drivers/scsi/sr_ioctl.c --- linux-2.6.30-rc4/drivers/scsi/sr_ioctl.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/scsi/sr_ioctl.c 2009-05-13 09:46:19.000000000 +0200 @@ -309,6 +309,11 @@ int sr_drive_status(struct cdrom_device_ if (0 == sr_test_unit_ready(cd->device, &sshdr)) return CDS_DISC_OK; + /* SK/ASC/ASCQ of 2/4/1 means "unit is becoming ready" */ + if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY + && sshdr.asc == 0x04 && sshdr.ascq == 0x01) + return CDS_DRIVE_NOT_READY; + if (!cdrom_get_media_event(cdi, &med)) { if (med.media_present) return CDS_DISC_OK; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/serial/crisv10.c linux-2.6.30-rc4-git/drivers/serial/crisv10.c --- linux-2.6.30-rc4/drivers/serial/crisv10.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/serial/crisv10.c 2009-05-13 09:46:19.000000000 +0200 @@ -23,16 +23,18 @@ static char *serial_version = "$Revision #include #include #include -#include #include #include #include +#include +#include +#include +#include +#include -#include #include #include #include -#include #include @@ -456,7 +458,6 @@ static struct e100_serial rs_table[] = { #define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial)) -static struct ktermios *serial_termios[NR_PORTS]; #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER static struct fast_timer fast_timers[NR_PORTS]; #endif @@ -4257,151 +4258,132 @@ rs_open(struct tty_struct *tty, struct f return 0; } +#ifdef CONFIG_PROC_FS /* * /proc fs routines.... */ -static int line_info(char *buf, struct e100_serial *info) +static void seq_line_info(struct seq_file *m, struct e100_serial *info) { - char stat_buf[30]; - int ret; unsigned long tmp; - ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d", - info->line, (unsigned long)info->ioport, info->irq); + seq_printf(m, "%d: uart:E100 port:%lX irq:%d", + info->line, (unsigned long)info->ioport, info->irq); if (!info->ioport || (info->type == PORT_UNKNOWN)) { - ret += sprintf(buf+ret, "\n"); - return ret; + seq_printf(m, "\n"); + return; } - stat_buf[0] = 0; - stat_buf[1] = 0; - if (!E100_RTS_GET(info)) - strcat(stat_buf, "|RTS"); - if (!E100_CTS_GET(info)) - strcat(stat_buf, "|CTS"); - if (!E100_DTR_GET(info)) - strcat(stat_buf, "|DTR"); - if (!E100_DSR_GET(info)) - strcat(stat_buf, "|DSR"); - if (!E100_CD_GET(info)) - strcat(stat_buf, "|CD"); - if (!E100_RI_GET(info)) - strcat(stat_buf, "|RI"); - - ret += sprintf(buf+ret, " baud:%d", info->baud); - - ret += sprintf(buf+ret, " tx:%lu rx:%lu", + seq_printf(m, " baud:%d", info->baud); + seq_printf(m, " tx:%lu rx:%lu", (unsigned long)info->icount.tx, (unsigned long)info->icount.rx); tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); - if (tmp) { - ret += sprintf(buf+ret, " tx_pend:%lu/%lu", - (unsigned long)tmp, - (unsigned long)SERIAL_XMIT_SIZE); - } - - ret += sprintf(buf+ret, " rx_pend:%lu/%lu", - (unsigned long)info->recv_cnt, - (unsigned long)info->max_recv_cnt); + if (tmp) + seq_printf(m, " tx_pend:%lu/%lu", + (unsigned long)tmp, + (unsigned long)SERIAL_XMIT_SIZE); + + seq_printf(m, " rx_pend:%lu/%lu", + (unsigned long)info->recv_cnt, + (unsigned long)info->max_recv_cnt); #if 1 if (info->port.tty) { - if (info->port.tty->stopped) - ret += sprintf(buf+ret, " stopped:%i", - (int)info->port.tty->stopped); + seq_printf(m, " stopped:%i", + (int)info->port.tty->stopped); if (info->port.tty->hw_stopped) - ret += sprintf(buf+ret, " hw_stopped:%i", - (int)info->port.tty->hw_stopped); + seq_printf(m, " hw_stopped:%i", + (int)info->port.tty->hw_stopped); } { unsigned char rstat = info->ioport[REG_STATUS]; - if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) - ret += sprintf(buf+ret, " xoff_detect:1"); + if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect)) + seq_printf(m, " xoff_detect:1"); } #endif - - - if (info->icount.frame) - ret += sprintf(buf+ret, " fe:%lu", - (unsigned long)info->icount.frame); + seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame); if (info->icount.parity) - ret += sprintf(buf+ret, " pe:%lu", - (unsigned long)info->icount.parity); + seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity); if (info->icount.brk) - ret += sprintf(buf+ret, " brk:%lu", - (unsigned long)info->icount.brk); + seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk); if (info->icount.overrun) - ret += sprintf(buf+ret, " oe:%lu", - (unsigned long)info->icount.overrun); + seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun); /* * Last thing is the RS-232 status lines */ - ret += sprintf(buf+ret, " %s\n", stat_buf+1); - return ret; + if (!E100_RTS_GET(info)) + seq_puts(m, "|RTS"); + if (!E100_CTS_GET(info)) + seq_puts(m, "|CTS"); + if (!E100_DTR_GET(info)) + seq_puts(m, "|DTR"); + if (!E100_DSR_GET(info)) + seq_puts(m, "|DSR"); + if (!E100_CD_GET(info)) + seq_puts(m, "|CD"); + if (!E100_RI_GET(info)) + seq_puts(m, "|RI"); + seq_puts(m, "\n"); } -int rs_read_proc(char *page, char **start, off_t off, int count, - int *eof, void *data) + +static int crisv10_proc_show(struct seq_file *m, void *v) { - int i, len = 0, l; - off_t begin = 0; + int i; + + seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); - len += sprintf(page, "serinfo:1.0 driver:%s\n", - serial_version); - for (i = 0; i < NR_PORTS && len < 4000; i++) { + for (i = 0; i < NR_PORTS; i++) { if (!rs_table[i].enabled) continue; - l = line_info(page + len, &rs_table[i]); - len += l; - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } + seq_line_info(m, &rs_table[i]); } #ifdef DEBUG_LOG_INCLUDED for (i = 0; i < debug_log_pos; i++) { - len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data)); - len += sprintf(page + len, debug_log[i].string, debug_log[i].value); - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } + seq_printf(m, "%-4i %lu.%lu ", + i, debug_log[i].time, + timer_data_to_ns(debug_log[i].timer_data)); + seq_printf(m, debug_log[i].string, debug_log[i].value); } - len += sprintf(page + len, "debug_log %i/%i %li bytes\n", - i, DEBUG_LOG_SIZE, begin+len); + seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE); debug_log_pos = 0; #endif + return 0; +} - *eof = 1; -done: - if (off >= len+begin) - return 0; - *start = page + (off-begin); - return ((count < begin+len-off) ? count : begin+len-off); +static int crisv10_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, crisv10_proc_show, NULL); } +static const struct file_operations crisv10_proc_fops = { + .owner = THIS_MODULE, + .open = crisv10_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + + /* Finally, routines used to initialize the serial driver. */ -static void -show_serial_version(void) +static void show_serial_version(void) { printk(KERN_INFO - "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n", + "ETRAX 100LX serial-driver %s, " + "(c) 2000-2004 Axis Communications AB\r\n", &serial_version[11]); /* "$Revision: x.yy" */ } @@ -4425,13 +4407,14 @@ static const struct tty_operations rs_op .break_ctl = rs_break, .send_xchar = rs_send_xchar, .wait_until_sent = rs_wait_until_sent, - .read_proc = rs_read_proc, .tiocmget = rs_tiocmget, - .tiocmset = rs_tiocmset + .tiocmset = rs_tiocmset, +#ifdef CONFIG_PROC_FS + .proc_fops = &crisv10_proc_fops, +#endif }; -static int __init -rs_init(void) +static int __init rs_init(void) { int i; struct e100_serial *info; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/serial/imx.c linux-2.6.30-rc4-git/drivers/serial/imx.c --- linux-2.6.30-rc4/drivers/serial/imx.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/serial/imx.c 2009-05-13 09:46:19.000000000 +0200 @@ -66,7 +66,7 @@ #define ONEMS 0xb0 /* One Millisecond register */ #define UTS 0xb4 /* UART Test Register */ #endif -#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1) +#ifdef CONFIG_ARCH_MX1 #define BIPR1 0xb0 /* Incremental Preset Register 1 */ #define BIPR2 0xb4 /* Incremental Preset Register 2 */ #define BIPR3 0xb8 /* Incremental Preset Register 3 */ @@ -96,7 +96,7 @@ #define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ #define UCR1_SNDBRK (1<<4) /* Send break */ #define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ -#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1) +#ifdef CONFIG_ARCH_MX1 #define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ #endif #if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2 @@ -127,7 +127,7 @@ #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#ifdef CONFIG_ARCH_IMX +#ifdef CONFIG_ARCH_MX1 #define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */ #define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */ #endif @@ -180,13 +180,6 @@ #define UTS_SOFTRST (1<<0) /* Software reset */ /* We've been assigned a range on the "Low-density serial ports" major */ -#ifdef CONFIG_ARCH_IMX -#define SERIAL_IMX_MAJOR 204 -#define MINOR_START 41 -#define DEV_NAME "ttySMX" -#define MAX_INTERNAL_IRQ IMX_IRQS -#endif - #ifdef CONFIG_ARCH_MXC #define SERIAL_IMX_MAJOR 207 #define MINOR_START 16 diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/spi/Kconfig linux-2.6.30-rc4-git/drivers/spi/Kconfig --- linux-2.6.30-rc4/drivers/spi/Kconfig 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/spi/Kconfig 2009-05-13 09:46:19.000000000 +0200 @@ -118,7 +118,7 @@ config SPI_GPIO config SPI_IMX tristate "Freescale iMX SPI controller" - depends on ARCH_IMX && EXPERIMENTAL + depends on ARCH_MX1 && EXPERIMENTAL help This enables using the Freescale iMX SPI controller in master mode. diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/video/console/vgacon.c linux-2.6.30-rc4-git/drivers/video/console/vgacon.c --- linux-2.6.30-rc4/drivers/video/console/vgacon.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/video/console/vgacon.c 2009-05-13 09:46:19.000000000 +0200 @@ -1282,7 +1282,7 @@ static int vgacon_font_get(struct vc_dat font->charcount = vga_512_chars ? 512 : 256; if (!font->data) return 0; - return vgacon_do_font_op(&state, font->data, 0, 0); + return vgacon_do_font_op(&state, font->data, 0, vga_512_chars); } #else diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/video/Kconfig linux-2.6.30-rc4-git/drivers/video/Kconfig --- linux-2.6.30-rc4/drivers/video/Kconfig 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/video/Kconfig 2009-05-13 09:46:19.000000000 +0200 @@ -397,7 +397,7 @@ config FB_SA1100 config FB_IMX tristate "Motorola i.MX LCD support" - depends on FB && (ARCH_IMX || ARCH_MX2) + depends on FB && (ARCH_MX1 || ARCH_MX2) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/drivers/video/mx3fb.c linux-2.6.30-rc4-git/drivers/video/mx3fb.c --- linux-2.6.30-rc4/drivers/video/mx3fb.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/drivers/video/mx3fb.c 2009-05-13 09:46:19.000000000 +0200 @@ -706,7 +706,7 @@ static void mx3fb_dma_done(void *arg) dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq); /* We only need one interrupt, it will be re-enabled as needed */ - disable_irq(ichannel->eof_irq); + disable_irq_nosync(ichannel->eof_irq); complete(&mx3_fbi->flip_cmpl); } @@ -1152,11 +1152,11 @@ static struct fb_ops mx3fb_ops = { */ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) { - struct mx3fb_data *drv_data = platform_get_drvdata(pdev); - struct mx3fb_info *mx3_fbi = drv_data->fbi->par; + struct mx3fb_data *mx3fb = platform_get_drvdata(pdev); + struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; acquire_console_sem(); - fb_set_suspend(drv_data->fbi, 1); + fb_set_suspend(mx3fb->fbi, 1); release_console_sem(); if (mx3_fbi->blank == FB_BLANK_UNBLANK) { @@ -1172,16 +1172,16 @@ static int mx3fb_suspend(struct platform */ static int mx3fb_resume(struct platform_device *pdev) { - struct mx3fb_data *drv_data = platform_get_drvdata(pdev); - struct mx3fb_info *mx3_fbi = drv_data->fbi->par; + struct mx3fb_data *mx3fb = platform_get_drvdata(pdev); + struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; if (mx3_fbi->blank == FB_BLANK_UNBLANK) { sdc_enable_channel(mx3_fbi); - sdc_set_brightness(mx3fb, drv_data->backlight_level); + sdc_set_brightness(mx3fb, mx3fb->backlight_level); } acquire_console_sem(); - fb_set_suspend(drv_data->fbi, 0); + fb_set_suspend(mx3fb->fbi, 0); release_console_sem(); return 0; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/autofs4/expire.c linux-2.6.30-rc4-git/fs/autofs4/expire.c --- linux-2.6.30-rc4/fs/autofs4/expire.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/autofs4/expire.c 2009-05-13 09:46:19.000000000 +0200 @@ -70,8 +70,10 @@ static int autofs4_mount_busy(struct vfs * Otherwise it's an offset mount and we need to check * if we can umount its mount, if there is one. */ - if (!d_mountpoint(dentry)) + if (!d_mountpoint(dentry)) { + status = 0; goto done; + } } /* Update the expiry counter if fs is busy */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/binfmt_elf_fdpic.c linux-2.6.30-rc4-git/fs/binfmt_elf_fdpic.c --- linux-2.6.30-rc4/fs/binfmt_elf_fdpic.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/binfmt_elf_fdpic.c 2009-05-13 09:46:19.000000000 +0200 @@ -1388,7 +1388,7 @@ static void fill_prstatus(struct elf_prs prstatus->pr_sigpend = p->pending.signal.sig[0]; prstatus->pr_sighold = p->blocked.sig[0]; prstatus->pr_pid = task_pid_vnr(p); - prstatus->pr_ppid = task_pid_vnr(p->parent); + prstatus->pr_ppid = task_pid_vnr(p->real_parent); prstatus->pr_pgrp = task_pgrp_vnr(p); prstatus->pr_sid = task_session_vnr(p); if (thread_group_leader(p)) { @@ -1433,7 +1433,7 @@ static int fill_psinfo(struct elf_prpsin psinfo->pr_psargs[len] = 0; psinfo->pr_pid = task_pid_vnr(p); - psinfo->pr_ppid = task_pid_vnr(p->parent); + psinfo->pr_ppid = task_pid_vnr(p->real_parent); psinfo->pr_pgrp = task_pgrp_vnr(p); psinfo->pr_sid = task_session_vnr(p); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/buffer.c linux-2.6.30-rc4-git/fs/buffer.c --- linux-2.6.30-rc4/fs/buffer.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/buffer.c 2009-05-13 09:46:19.000000000 +0200 @@ -2397,7 +2397,8 @@ block_page_mkwrite(struct vm_area_struct if ((page->mapping != inode->i_mapping) || (page_offset(page) > size)) { /* page got truncated out from underneath us */ - goto out_unlock; + unlock_page(page); + goto out; } /* page is wholly or partially inside EOF */ @@ -2411,14 +2412,15 @@ block_page_mkwrite(struct vm_area_struct ret = block_commit_write(page, 0, end); if (unlikely(ret)) { + unlock_page(page); if (ret == -ENOMEM) ret = VM_FAULT_OOM; else /* -ENOSPC, -EIO, etc */ ret = VM_FAULT_SIGBUS; - } + } else + ret = VM_FAULT_LOCKED; -out_unlock: - unlock_page(page); +out: return ret; } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/configfs/symlink.c linux-2.6.30-rc4-git/fs/configfs/symlink.c --- linux-2.6.30-rc4/fs/configfs/symlink.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/configfs/symlink.c 2009-05-13 09:46:19.000000000 +0200 @@ -135,7 +135,7 @@ int configfs_symlink(struct inode *dir, struct path path; struct configfs_dirent *sd; struct config_item *parent_item; - struct config_item *target_item; + struct config_item *target_item = NULL; struct config_item_type *type; ret = -EPERM; /* What lack-of-symlink returns */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/exec.c linux-2.6.30-rc4-git/fs/exec.c --- linux-2.6.30-rc4/fs/exec.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/exec.c 2009-05-13 09:46:19.000000000 +0200 @@ -69,17 +69,18 @@ int suid_dumpable = 0; static LIST_HEAD(formats); static DEFINE_RWLOCK(binfmt_lock); -int register_binfmt(struct linux_binfmt * fmt) +int __register_binfmt(struct linux_binfmt * fmt, int insert) { if (!fmt) return -EINVAL; write_lock(&binfmt_lock); - list_add(&fmt->lh, &formats); + insert ? list_add(&fmt->lh, &formats) : + list_add_tail(&fmt->lh, &formats); write_unlock(&binfmt_lock); return 0; } -EXPORT_SYMBOL(register_binfmt); +EXPORT_SYMBOL(__register_binfmt); void unregister_binfmt(struct linux_binfmt * fmt) { diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/ocfs2/dcache.c linux-2.6.30-rc4-git/fs/ocfs2/dcache.c --- linux-2.6.30-rc4/fs/ocfs2/dcache.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/ocfs2/dcache.c 2009-05-13 09:46:19.000000000 +0200 @@ -290,6 +290,21 @@ out_attach: else mlog_errno(ret); + /* + * In case of error, manually free the allocation and do the iput(). + * We need to do this because error here means no d_instantiate(), + * which means iput() will not be called during dput(dentry). + */ + if (ret < 0 && !alias) { + ocfs2_lock_res_free(&dl->dl_lockres); + BUG_ON(dl->dl_count != 1); + spin_lock(&dentry_attach_lock); + dentry->d_fsdata = NULL; + spin_unlock(&dentry_attach_lock); + kfree(dl); + iput(inode); + } + dput(alias); return ret; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/ocfs2/dir.c linux-2.6.30-rc4-git/fs/ocfs2/dir.c --- linux-2.6.30-rc4/fs/ocfs2/dir.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/ocfs2/dir.c 2009-05-13 09:46:19.000000000 +0200 @@ -2697,7 +2697,7 @@ static int ocfs2_dx_dir_index_block(stru u32 *num_dx_entries, struct buffer_head *dirent_bh) { - int ret, namelen, i; + int ret = 0, namelen, i; char *de_buf, *limit; struct ocfs2_dir_entry *de; struct buffer_head *dx_leaf_bh; @@ -2934,7 +2934,7 @@ static int ocfs2_expand_inline_dir(struc */ BUG_ON(alloc > 2); - ret = ocfs2_reserve_clusters(osb, alloc, &data_ac); + ret = ocfs2_reserve_clusters(osb, alloc + dx_alloc, &data_ac); if (ret) { mlog_errno(ret); goto out; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/ocfs2/export.c linux-2.6.30-rc4-git/fs/ocfs2/export.c --- linux-2.6.30-rc4/fs/ocfs2/export.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/ocfs2/export.c 2009-05-13 09:46:19.000000000 +0200 @@ -100,7 +100,8 @@ static struct dentry *ocfs2_get_dentry(s /* If the inode allocator bit is clear, this inode must be stale */ if (!set) { - mlog(0, "inode %llu suballoc bit is clear\n", blkno); + mlog(0, "inode %llu suballoc bit is clear\n", + (unsigned long long)blkno); status = -ESTALE; goto unlock_nfs_sync; } @@ -114,7 +115,7 @@ check_err: if (status < 0) { if (status == -ESTALE) { mlog(0, "stale inode ino: %llu generation: %u\n", - blkno, handle->ih_generation); + (unsigned long long)blkno, handle->ih_generation); } result = ERR_PTR(status); goto bail; @@ -129,8 +130,8 @@ check_err: check_gen: if (handle->ih_generation != inode->i_generation) { iput(inode); - mlog(0, "stale inode ino: %llu generation: %u\n", blkno, - handle->ih_generation); + mlog(0, "stale inode ino: %llu generation: %u\n", + (unsigned long long)blkno, handle->ih_generation); result = ERR_PTR(-ESTALE); goto bail; } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/ocfs2/journal.h linux-2.6.30-rc4-git/fs/ocfs2/journal.h --- linux-2.6.30-rc4/fs/ocfs2/journal.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/ocfs2/journal.h 2009-05-13 09:46:19.000000000 +0200 @@ -437,8 +437,9 @@ static inline int ocfs2_unlink_credits(s } /* dinode + orphan dir dinode + inode alloc dinode + orphan dir entry + - * inode alloc group descriptor + orphan dir index leaf */ -#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 3) + * inode alloc group descriptor + orphan dir index root + + * orphan dir index leaf */ +#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 4) /* dinode update, old dir dinode update, new dir dinode update, old * dir dir entry, new dir dir entry, dir entry update for renaming diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/ocfs2/namei.c linux-2.6.30-rc4-git/fs/ocfs2/namei.c --- linux-2.6.30-rc4/fs/ocfs2/namei.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/ocfs2/namei.c 2009-05-13 09:46:19.000000000 +0200 @@ -1025,10 +1025,8 @@ static int ocfs2_rename(struct inode *ol struct inode *orphan_dir = NULL; struct ocfs2_dinode *newfe = NULL; char orphan_name[OCFS2_ORPHAN_NAMELEN + 1]; - struct buffer_head *orphan_entry_bh = NULL; struct buffer_head *newfe_bh = NULL; struct buffer_head *old_inode_bh = NULL; - struct buffer_head *insert_entry_bh = NULL; struct ocfs2_super *osb = NULL; u64 newfe_blkno, old_de_ino; handle_t *handle = NULL; @@ -1455,8 +1453,6 @@ bail: brelse(old_inode_bh); brelse(old_dir_bh); brelse(new_dir_bh); - brelse(orphan_entry_bh); - brelse(insert_entry_bh); mlog_exit(status); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/ocfs2/suballoc.c linux-2.6.30-rc4-git/fs/ocfs2/suballoc.c --- linux-2.6.30-rc4/fs/ocfs2/suballoc.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/ocfs2/suballoc.c 2009-05-13 09:46:19.000000000 +0200 @@ -2197,26 +2197,29 @@ static int ocfs2_get_suballoc_slot_bit(s struct buffer_head *inode_bh = NULL; struct ocfs2_dinode *inode_fe; - mlog_entry("blkno: %llu\n", blkno); + mlog_entry("blkno: %llu\n", (unsigned long long)blkno); /* dirty read disk */ status = ocfs2_read_blocks_sync(osb, blkno, 1, &inode_bh); if (status < 0) { - mlog(ML_ERROR, "read block %llu failed %d\n", blkno, status); + mlog(ML_ERROR, "read block %llu failed %d\n", + (unsigned long long)blkno, status); goto bail; } inode_fe = (struct ocfs2_dinode *) inode_bh->b_data; if (!OCFS2_IS_VALID_DINODE(inode_fe)) { - mlog(ML_ERROR, "invalid inode %llu requested\n", blkno); + mlog(ML_ERROR, "invalid inode %llu requested\n", + (unsigned long long)blkno); status = -EINVAL; goto bail; } - if (le16_to_cpu(inode_fe->i_suballoc_slot) != OCFS2_INVALID_SLOT && + if (le16_to_cpu(inode_fe->i_suballoc_slot) != (u16)OCFS2_INVALID_SLOT && (u32)le16_to_cpu(inode_fe->i_suballoc_slot) > osb->max_slots - 1) { mlog(ML_ERROR, "inode %llu has invalid suballoc slot %u\n", - blkno, (u32)le16_to_cpu(inode_fe->i_suballoc_slot)); + (unsigned long long)blkno, + (u32)le16_to_cpu(inode_fe->i_suballoc_slot)); status = -EINVAL; goto bail; } @@ -2251,7 +2254,8 @@ static int ocfs2_test_suballoc_bit(struc u64 bg_blkno; int status; - mlog_entry("blkno: %llu bit: %u\n", blkno, (unsigned int)bit); + mlog_entry("blkno: %llu bit: %u\n", (unsigned long long)blkno, + (unsigned int)bit); alloc_fe = (struct ocfs2_dinode *)alloc_bh->b_data; if ((bit + 1) > ocfs2_bits_per_group(&alloc_fe->id2.i_chain)) { @@ -2266,7 +2270,8 @@ static int ocfs2_test_suballoc_bit(struc status = ocfs2_read_group_descriptor(suballoc, alloc_fe, bg_blkno, &group_bh); if (status < 0) { - mlog(ML_ERROR, "read group %llu failed %d\n", bg_blkno, status); + mlog(ML_ERROR, "read group %llu failed %d\n", + (unsigned long long)bg_blkno, status); goto bail; } @@ -2300,7 +2305,7 @@ int ocfs2_test_inode_bit(struct ocfs2_su struct inode *inode_alloc_inode; struct buffer_head *alloc_bh = NULL; - mlog_entry("blkno: %llu", blkno); + mlog_entry("blkno: %llu", (unsigned long long)blkno); status = ocfs2_get_suballoc_slot_bit(osb, blkno, &suballoc_slot, &suballoc_bit); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/proc/meminfo.c linux-2.6.30-rc4-git/fs/proc/meminfo.c --- linux-2.6.30-rc4/fs/proc/meminfo.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/proc/meminfo.c 2009-05-13 09:46:19.000000000 +0200 @@ -35,7 +35,7 @@ static int meminfo_proc_show(struct seq_ #define K(x) ((x) << (PAGE_SHIFT - 10)) si_meminfo(&i); si_swapinfo(&i); - committed = atomic_long_read(&vm_committed_space); + committed = percpu_counter_read_positive(&vm_committed_as); allowed = ((totalram_pages - hugetlb_total_pages()) * sysctl_overcommit_ratio / 100) + total_swap_pages; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/proc/task_mmu.c linux-2.6.30-rc4-git/fs/proc/task_mmu.c --- linux-2.6.30-rc4/fs/proc/task_mmu.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/proc/task_mmu.c 2009-05-13 09:46:19.000000000 +0200 @@ -665,6 +665,10 @@ static ssize_t pagemap_read(struct file goto out_task; ret = 0; + + if (!count) + goto out_task; + mm = get_task_mm(task); if (!mm) goto out_task; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/xfs/xfs_bmap.c linux-2.6.30-rc4-git/fs/xfs/xfs_bmap.c --- linux-2.6.30-rc4/fs/xfs/xfs_bmap.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/xfs/xfs_bmap.c 2009-05-13 09:46:19.000000000 +0200 @@ -5880,7 +5880,7 @@ xfs_getbmap( void *arg) /* formatter arg */ { __int64_t bmvend; /* last block requested */ - int error; /* return value */ + int error = 0; /* return value */ __int64_t fixlen; /* length for -1 case */ int i; /* extent number */ int lock; /* lock state */ @@ -5890,39 +5890,18 @@ xfs_getbmap( int nexleft; /* # of user extents left */ int subnex; /* # of bmapi's can do */ int nmap; /* number of map entries */ - struct getbmapx out; /* output structure */ + struct getbmapx *out; /* output structure */ int whichfork; /* data or attr fork */ int prealloced; /* this is a file with * preallocated data space */ int iflags; /* interface flags */ int bmapi_flags; /* flags for xfs_bmapi */ + int cur_ext = 0; mp = ip->i_mount; iflags = bmv->bmv_iflags; - whichfork = iflags & BMV_IF_ATTRFORK ? XFS_ATTR_FORK : XFS_DATA_FORK; - /* If the BMV_IF_NO_DMAPI_READ interface bit specified, do not - * generate a DMAPI read event. Otherwise, if the DM_EVENT_READ - * bit is set for the file, generate a read event in order - * that the DMAPI application may do its thing before we return - * the extents. Usually this means restoring user file data to - * regions of the file that look like holes. - * - * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify - * BMV_IF_NO_DMAPI_READ so that read events are generated. - * If this were not true, callers of ioctl( XFS_IOC_GETBMAP ) - * could misinterpret holes in a DMAPI file as true holes, - * when in fact they may represent offline user data. - */ - if ((iflags & BMV_IF_NO_DMAPI_READ) == 0 && - DM_EVENT_ENABLED(ip, DM_EVENT_READ) && - whichfork == XFS_DATA_FORK) { - error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip, 0, 0, 0, NULL); - if (error) - return XFS_ERROR(error); - } - if (whichfork == XFS_ATTR_FORK) { if (XFS_IFORK_Q(ip)) { if (ip->i_d.di_aformat != XFS_DINODE_FMT_EXTENTS && @@ -5936,11 +5915,37 @@ xfs_getbmap( ip->i_mount); return XFS_ERROR(EFSCORRUPTED); } - } else if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS && - ip->i_d.di_format != XFS_DINODE_FMT_BTREE && - ip->i_d.di_format != XFS_DINODE_FMT_LOCAL) - return XFS_ERROR(EINVAL); - if (whichfork == XFS_DATA_FORK) { + + prealloced = 0; + fixlen = 1LL << 32; + } else { + /* + * If the BMV_IF_NO_DMAPI_READ interface bit specified, do + * not generate a DMAPI read event. Otherwise, if the + * DM_EVENT_READ bit is set for the file, generate a read + * event in order that the DMAPI application may do its thing + * before we return the extents. Usually this means restoring + * user file data to regions of the file that look like holes. + * + * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify + * BMV_IF_NO_DMAPI_READ so that read events are generated. + * If this were not true, callers of ioctl(XFS_IOC_GETBMAP) + * could misinterpret holes in a DMAPI file as true holes, + * when in fact they may represent offline user data. + */ + if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) && + !(iflags & BMV_IF_NO_DMAPI_READ)) { + error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip, + 0, 0, 0, NULL); + if (error) + return XFS_ERROR(error); + } + + if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS && + ip->i_d.di_format != XFS_DINODE_FMT_BTREE && + ip->i_d.di_format != XFS_DINODE_FMT_LOCAL) + return XFS_ERROR(EINVAL); + if (xfs_get_extsz_hint(ip) || ip->i_d.di_flags & (XFS_DIFLAG_PREALLOC|XFS_DIFLAG_APPEND)){ prealloced = 1; @@ -5949,42 +5954,41 @@ xfs_getbmap( prealloced = 0; fixlen = ip->i_size; } - } else { - prealloced = 0; - fixlen = 1LL << 32; } if (bmv->bmv_length == -1) { fixlen = XFS_FSB_TO_BB(mp, XFS_B_TO_FSB(mp, fixlen)); - bmv->bmv_length = MAX( (__int64_t)(fixlen - bmv->bmv_offset), - (__int64_t)0); - } else if (bmv->bmv_length < 0) - return XFS_ERROR(EINVAL); - if (bmv->bmv_length == 0) { + bmv->bmv_length = + max_t(__int64_t, fixlen - bmv->bmv_offset, 0); + } else if (bmv->bmv_length == 0) { bmv->bmv_entries = 0; return 0; + } else if (bmv->bmv_length < 0) { + return XFS_ERROR(EINVAL); } + nex = bmv->bmv_count - 1; if (nex <= 0) return XFS_ERROR(EINVAL); bmvend = bmv->bmv_offset + bmv->bmv_length; - xfs_ilock(ip, XFS_IOLOCK_SHARED); - if (((iflags & BMV_IF_DELALLOC) == 0) && - (whichfork == XFS_DATA_FORK) && - (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size)) { - /* xfs_fsize_t last_byte = xfs_file_last_byte(ip); */ - error = xfs_flush_pages(ip, (xfs_off_t)0, - -1, 0, FI_REMAPF); - if (error) { - xfs_iunlock(ip, XFS_IOLOCK_SHARED); - return error; + if (bmv->bmv_count > ULONG_MAX / sizeof(struct getbmapx)) + return XFS_ERROR(ENOMEM); + out = kmem_zalloc(bmv->bmv_count * sizeof(struct getbmapx), KM_MAYFAIL); + if (!out) + return XFS_ERROR(ENOMEM); + + xfs_ilock(ip, XFS_IOLOCK_SHARED); + if (whichfork == XFS_DATA_FORK && !(iflags & BMV_IF_DELALLOC)) { + if (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size) { + error = xfs_flush_pages(ip, 0, -1, 0, FI_REMAPF); + if (error) + goto out_unlock_iolock; } - } - ASSERT(whichfork == XFS_ATTR_FORK || (iflags & BMV_IF_DELALLOC) || - ip->i_delayed_blks == 0); + ASSERT(ip->i_delayed_blks == 0); + } lock = xfs_ilock_map_shared(ip); @@ -5995,23 +5999,25 @@ xfs_getbmap( if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1) nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1; - bmapi_flags = xfs_bmapi_aflag(whichfork) | - ((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE); + bmapi_flags = xfs_bmapi_aflag(whichfork); + if (!(iflags & BMV_IF_PREALLOC)) + bmapi_flags |= XFS_BMAPI_IGSTATE; /* * Allocate enough space to handle "subnex" maps at a time. */ + error = ENOMEM; subnex = 16; - map = kmem_alloc(subnex * sizeof(*map), KM_SLEEP); + map = kmem_alloc(subnex * sizeof(*map), KM_MAYFAIL); + if (!map) + goto out_unlock_ilock; bmv->bmv_entries = 0; - if ((XFS_IFORK_NEXTENTS(ip, whichfork) == 0)) { - if (((iflags & BMV_IF_DELALLOC) == 0) || - whichfork == XFS_ATTR_FORK) { - error = 0; - goto unlock_and_return; - } + if (XFS_IFORK_NEXTENTS(ip, whichfork) == 0 && + (whichfork == XFS_ATTR_FORK || !(iflags & BMV_IF_DELALLOC))) { + error = 0; + goto out_free_map; } nexleft = nex; @@ -6023,53 +6029,61 @@ xfs_getbmap( bmapi_flags, NULL, 0, map, &nmap, NULL, NULL); if (error) - goto unlock_and_return; + goto out_free_map; ASSERT(nmap <= subnex); for (i = 0; i < nmap && nexleft && bmv->bmv_length; i++) { - out.bmv_oflags = 0; + out[cur_ext].bmv_oflags = 0; if (map[i].br_state == XFS_EXT_UNWRITTEN) - out.bmv_oflags |= BMV_OF_PREALLOC; + out[cur_ext].bmv_oflags |= BMV_OF_PREALLOC; else if (map[i].br_startblock == DELAYSTARTBLOCK) - out.bmv_oflags |= BMV_OF_DELALLOC; - out.bmv_offset = XFS_FSB_TO_BB(mp, map[i].br_startoff); - out.bmv_length = XFS_FSB_TO_BB(mp, map[i].br_blockcount); - out.bmv_unused1 = out.bmv_unused2 = 0; + out[cur_ext].bmv_oflags |= BMV_OF_DELALLOC; + out[cur_ext].bmv_offset = + XFS_FSB_TO_BB(mp, map[i].br_startoff); + out[cur_ext].bmv_length = + XFS_FSB_TO_BB(mp, map[i].br_blockcount); + out[cur_ext].bmv_unused1 = 0; + out[cur_ext].bmv_unused2 = 0; ASSERT(((iflags & BMV_IF_DELALLOC) != 0) || (map[i].br_startblock != DELAYSTARTBLOCK)); if (map[i].br_startblock == HOLESTARTBLOCK && whichfork == XFS_ATTR_FORK) { /* came to the end of attribute fork */ - out.bmv_oflags |= BMV_OF_LAST; - goto unlock_and_return; - } else { - int full = 0; /* user array is full */ - - if (!xfs_getbmapx_fix_eof_hole(ip, &out, - prealloced, bmvend, - map[i].br_startblock)) { - goto unlock_and_return; - } - - /* format results & advance arg */ - error = formatter(&arg, &out, &full); - if (error || full) - goto unlock_and_return; - nexleft--; - bmv->bmv_offset = - out.bmv_offset + out.bmv_length; - bmv->bmv_length = MAX((__int64_t)0, - (__int64_t)(bmvend - bmv->bmv_offset)); - bmv->bmv_entries++; + out[cur_ext].bmv_oflags |= BMV_OF_LAST; + goto out_free_map; } + + if (!xfs_getbmapx_fix_eof_hole(ip, &out[cur_ext], + prealloced, bmvend, + map[i].br_startblock)) + goto out_free_map; + + nexleft--; + bmv->bmv_offset = + out[cur_ext].bmv_offset + + out[cur_ext].bmv_length; + bmv->bmv_length = + max_t(__int64_t, 0, bmvend - bmv->bmv_offset); + bmv->bmv_entries++; + cur_ext++; } } while (nmap && nexleft && bmv->bmv_length); -unlock_and_return: + out_free_map: + kmem_free(map); + out_unlock_ilock: xfs_iunlock_map_shared(ip, lock); + out_unlock_iolock: xfs_iunlock(ip, XFS_IOLOCK_SHARED); - kmem_free(map); + for (i = 0; i < cur_ext; i++) { + int full = 0; /* user array is full */ + + /* format results & advance arg */ + error = formatter(&arg, &out[i], &full); + if (error || full) + break; + } return error; } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/xfs/xfs_inode.c linux-2.6.30-rc4-git/fs/xfs/xfs_inode.c --- linux-2.6.30-rc4/fs/xfs/xfs_inode.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/xfs/xfs_inode.c 2009-05-13 09:46:19.000000000 +0200 @@ -1258,8 +1258,10 @@ xfs_file_last_byte( * necessary. */ if (ip->i_df.if_flags & XFS_IFEXTENTS) { + xfs_ilock(ip, XFS_ILOCK_SHARED); error = xfs_bmap_last_offset(NULL, ip, &last_block, XFS_DATA_FORK); + xfs_iunlock(ip, XFS_ILOCK_SHARED); if (error) { last_block = 0; } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/fs/xfs/xfs_mount.c linux-2.6.30-rc4-git/fs/xfs/xfs_mount.c --- linux-2.6.30-rc4/fs/xfs/xfs_mount.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/fs/xfs/xfs_mount.c 2009-05-13 09:46:19.000000000 +0200 @@ -291,14 +291,17 @@ xfs_mount_validate_sb( sbp->sb_sectsize > XFS_MAX_SECTORSIZE || sbp->sb_sectlog < XFS_MIN_SECTORSIZE_LOG || sbp->sb_sectlog > XFS_MAX_SECTORSIZE_LOG || + sbp->sb_sectsize != (1 << sbp->sb_sectlog) || sbp->sb_blocksize < XFS_MIN_BLOCKSIZE || sbp->sb_blocksize > XFS_MAX_BLOCKSIZE || sbp->sb_blocklog < XFS_MIN_BLOCKSIZE_LOG || sbp->sb_blocklog > XFS_MAX_BLOCKSIZE_LOG || + sbp->sb_blocksize != (1 << sbp->sb_blocklog) || sbp->sb_inodesize < XFS_DINODE_MIN_SIZE || sbp->sb_inodesize > XFS_DINODE_MAX_SIZE || sbp->sb_inodelog < XFS_DINODE_MIN_LOG || sbp->sb_inodelog > XFS_DINODE_MAX_LOG || + sbp->sb_inodesize != (1 << sbp->sb_inodelog) || (sbp->sb_blocklog - sbp->sb_inodelog != sbp->sb_inopblog) || (sbp->sb_rextsize * sbp->sb_blocksize > XFS_MAX_RTEXTSIZE) || (sbp->sb_rextsize * sbp->sb_blocksize < XFS_MIN_RTEXTSIZE) || diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/include/asm-generic/atomic.h linux-2.6.30-rc4-git/include/asm-generic/atomic.h --- linux-2.6.30-rc4/include/asm-generic/atomic.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/include/asm-generic/atomic.h 2009-05-13 09:46:19.000000000 +0200 @@ -132,9 +132,9 @@ static inline long atomic_long_add_unles #define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l)) #define atomic_long_cmpxchg(l, old, new) \ - (atomic_cmpxchg((atomic64_t *)(l), (old), (new))) + (atomic64_cmpxchg((atomic64_t *)(l), (old), (new))) #define atomic_long_xchg(v, new) \ - (atomic_xchg((atomic64_t *)(l), (new))) + (atomic64_xchg((atomic64_t *)(l), (new))) #else /* BITS_PER_LONG == 64 */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/include/linux/binfmts.h linux-2.6.30-rc4-git/include/linux/binfmts.h --- linux-2.6.30-rc4/include/linux/binfmts.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/include/linux/binfmts.h 2009-05-13 09:46:19.000000000 +0200 @@ -82,7 +82,19 @@ struct linux_binfmt { int hasvdso; }; -extern int register_binfmt(struct linux_binfmt *); +extern int __register_binfmt(struct linux_binfmt *fmt, int insert); + +/* Registration of default binfmt handlers */ +static inline int register_binfmt(struct linux_binfmt *fmt) +{ + return __register_binfmt(fmt, 0); +} +/* Same as above, but adds a new binfmt at the top of the list */ +static inline int insert_binfmt(struct linux_binfmt *fmt) +{ + return __register_binfmt(fmt, 1); +} + extern void unregister_binfmt(struct linux_binfmt *); extern int prepare_binprm(struct linux_binprm *); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/include/linux/blkdev.h linux-2.6.30-rc4-git/include/linux/blkdev.h --- linux-2.6.30-rc4/include/linux/blkdev.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/include/linux/blkdev.h 2009-05-13 09:46:19.000000000 +0200 @@ -601,6 +601,7 @@ enum { blk_failfast_driver(rq)) #define blk_rq_started(rq) ((rq)->cmd_flags & REQ_STARTED) #define blk_rq_io_stat(rq) ((rq)->cmd_flags & REQ_IO_STAT) +#define blk_rq_quiet(rq) ((rq)->cmd_flags & REQ_QUIET) #define blk_account_rq(rq) (blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq))) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/include/linux/input.h linux-2.6.30-rc4-git/include/linux/input.h --- linux-2.6.30-rc4/include/linux/input.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/include/linux/input.h 2009-05-13 09:46:19.000000000 +0200 @@ -106,6 +106,7 @@ struct input_absinfo { #define SYN_REPORT 0 #define SYN_CONFIG 1 +#define SYN_MT_REPORT 2 /* * Keys and buttons @@ -445,6 +446,7 @@ struct input_absinfo { #define BTN_STYLUS2 0x14c #define BTN_TOOL_DOUBLETAP 0x14d #define BTN_TOOL_TRIPLETAP 0x14e +#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ #define BTN_WHEEL 0x150 #define BTN_GEAR_DOWN 0x150 @@ -644,6 +646,17 @@ struct input_absinfo { #define ABS_TOOL_WIDTH 0x1c #define ABS_VOLUME 0x20 #define ABS_MISC 0x28 + +#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ +#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ +#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ +#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ +#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ +#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */ +#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */ +#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ +#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ + #define ABS_MAX 0x3f #define ABS_CNT (ABS_MAX+1) @@ -743,6 +756,12 @@ struct input_absinfo { #define BUS_ATARI 0x1B /* + * MT_TOOL types + */ +#define MT_TOOL_FINGER 0 +#define MT_TOOL_PEN 1 + +/* * Values describing the status of a force-feedback effect */ #define FF_STATUS_STOPPED 0x00 @@ -1311,6 +1330,11 @@ static inline void input_sync(struct inp input_event(dev, EV_SYN, SYN_REPORT, 0); } +static inline void input_mt_sync(struct input_dev *dev) +{ + input_event(dev, EV_SYN, SYN_MT_REPORT, 0); +} + void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code); static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/include/linux/memcontrol.h linux-2.6.30-rc4-git/include/linux/memcontrol.h --- linux-2.6.30-rc4/include/linux/memcontrol.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/include/linux/memcontrol.h 2009-05-13 09:46:19.000000000 +0200 @@ -56,7 +56,7 @@ extern void mem_cgroup_move_lists(struct enum lru_list from, enum lru_list to); extern void mem_cgroup_uncharge_page(struct page *page); extern void mem_cgroup_uncharge_cache_page(struct page *page); -extern int mem_cgroup_shrink_usage(struct page *page, +extern int mem_cgroup_shmem_charge_fallback(struct page *page, struct mm_struct *mm, gfp_t gfp_mask); extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan, @@ -155,7 +155,7 @@ static inline void mem_cgroup_uncharge_c { } -static inline int mem_cgroup_shrink_usage(struct page *page, +static inline int mem_cgroup_shmem_charge_fallback(struct page *page, struct mm_struct *mm, gfp_t gfp_mask) { return 0; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/include/linux/mman.h linux-2.6.30-rc4-git/include/linux/mman.h --- linux-2.6.30-rc4/include/linux/mman.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/include/linux/mman.h 2009-05-13 09:46:19.000000000 +0200 @@ -12,21 +12,18 @@ #ifdef __KERNEL__ #include +#include #include extern int sysctl_overcommit_memory; extern int sysctl_overcommit_ratio; -extern atomic_long_t vm_committed_space; +extern struct percpu_counter vm_committed_as; -#ifdef CONFIG_SMP -extern void vm_acct_memory(long pages); -#else static inline void vm_acct_memory(long pages) { - atomic_long_add(pages, &vm_committed_space); + percpu_counter_add(&vm_committed_as, pages); } -#endif static inline void vm_unacct_memory(long pages) { diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/include/linux/of_platform.h linux-2.6.30-rc4-git/include/linux/of_platform.h --- linux-2.6.30-rc4/include/linux/of_platform.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/include/linux/of_platform.h 2009-05-13 09:46:19.000000000 +0200 @@ -51,6 +51,16 @@ extern int of_register_driver(struct of_ struct bus_type *bus); extern void of_unregister_driver(struct of_platform_driver *drv); +/* Platform drivers register/unregister */ +static inline int of_register_platform_driver(struct of_platform_driver *drv) +{ + return of_register_driver(drv, &of_platform_bus_type); +} +static inline void of_unregister_platform_driver(struct of_platform_driver *drv) +{ + of_unregister_driver(drv); +} + #include extern struct of_device *of_find_device_by_node(struct device_node *np); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/include/linux/sunrpc/xprt.h linux-2.6.30-rc4-git/include/linux/sunrpc/xprt.h --- linux-2.6.30-rc4/include/linux/sunrpc/xprt.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/include/linux/sunrpc/xprt.h 2009-05-13 09:46:19.000000000 +0200 @@ -261,6 +261,7 @@ void xprt_conditional_disconnect(struc #define XPRT_BINDING (5) #define XPRT_CLOSING (6) #define XPRT_CONNECTION_ABORT (7) +#define XPRT_CONNECTION_CLOSE (8) static inline void xprt_set_connected(struct rpc_xprt *xprt) { diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/include/scsi/fc/fc_fs.h linux-2.6.30-rc4-git/include/scsi/fc/fc_fs.h --- linux-2.6.30-rc4/include/scsi/fc/fc_fs.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/include/scsi/fc/fc_fs.h 2009-05-13 09:46:19.000000000 +0200 @@ -149,6 +149,7 @@ enum fc_rctl { * Well-known fabric addresses. */ enum fc_well_known_fid { + FC_FID_NONE = 0x000000, /* No destination */ FC_FID_BCAST = 0xffffff, /* broadcast */ FC_FID_FLOGI = 0xfffffe, /* fabric login */ FC_FID_FCTRL = 0xfffffd, /* fabric controller */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/include/scsi/libfc.h linux-2.6.30-rc4-git/include/scsi/libfc.h --- linux-2.6.30-rc4/include/scsi/libfc.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/include/scsi/libfc.h 2009-05-13 09:46:19.000000000 +0200 @@ -637,6 +637,7 @@ struct fc_disc { enum fc_disc_event); struct list_head rports; + struct list_head rogue_rports; struct fc_lport *lport; struct mutex disc_mutex; struct fc_gpn_ft_resp partial_buf; /* partial name buffer */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/include/scsi/libiscsi.h linux-2.6.30-rc4-git/include/scsi/libiscsi.h --- linux-2.6.30-rc4/include/scsi/libiscsi.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/include/scsi/libiscsi.h 2009-05-13 09:46:19.000000000 +0200 @@ -36,6 +36,7 @@ struct scsi_transport_template; struct scsi_host_template; struct scsi_device; struct Scsi_Host; +struct scsi_target; struct scsi_cmnd; struct socket; struct iscsi_transport; @@ -350,6 +351,7 @@ extern struct Scsi_Host *iscsi_host_allo bool xmit_can_sleep); extern void iscsi_host_remove(struct Scsi_Host *shost); extern void iscsi_host_free(struct Scsi_Host *shost); +extern int iscsi_target_alloc(struct scsi_target *starget); /* * session management diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/include/scsi/osd_protocol.h linux-2.6.30-rc4-git/include/scsi/osd_protocol.h --- linux-2.6.30-rc4/include/scsi/osd_protocol.h 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/include/scsi/osd_protocol.h 2009-05-13 09:46:19.000000000 +0200 @@ -24,17 +24,18 @@ enum { OSDv1_ADDITIONAL_CDB_LENGTH = 192, OSDv1_TOTAL_CDB_LEN = OSDv1_ADDITIONAL_CDB_LENGTH + 8, OSDv1_CAP_LEN = 80, + /* Latest supported version */ -/* OSD_ADDITIONAL_CDB_LENGTH = 216,*/ + OSDv2_ADDITIONAL_CDB_LENGTH = 228, OSD_ADDITIONAL_CDB_LENGTH = - OSDv1_ADDITIONAL_CDB_LENGTH, /* FIXME: Pete rev-001 sup */ + OSDv2_ADDITIONAL_CDB_LENGTH, OSD_TOTAL_CDB_LEN = OSD_ADDITIONAL_CDB_LENGTH + 8, -/* OSD_CAP_LEN = 104,*/ - OSD_CAP_LEN = OSDv1_CAP_LEN,/* FIXME: Pete rev-001 sup */ + OSD_CAP_LEN = 104, OSD_SYSTEMID_LEN = 20, - OSD_CRYPTO_KEYID_SIZE = 20, - /*FIXME: OSDv2_CRYPTO_KEYID_SIZE = 32,*/ + OSDv1_CRYPTO_KEYID_SIZE = 20, + OSDv2_CRYPTO_KEYID_SIZE = 32, + OSD_CRYPTO_KEYID_SIZE = OSDv2_CRYPTO_KEYID_SIZE, OSD_CRYPTO_SEED_SIZE = 4, OSD_CRYPTO_NONCE_SIZE = 12, OSD_MAX_SENSE_LEN = 252, /* from SPC-3 */ @@ -164,7 +165,11 @@ struct osd_cdb_head { /* called allocation_length in some commands */ /*32*/ __be64 length; /*40*/ __be64 start_address; -/*48*/ __be32 list_identifier;/* Rarely used */ + union { +/*48*/ __be32 list_identifier;/* Rarely used */ + /* OSD2r05 5.2.5 CDB continuation length */ +/*48*/ __be32 cdb_continuation_length; + }; } __packed v2; }; /*52*/ union { /* selected attributes mode Page/List/Single */ @@ -204,29 +209,40 @@ struct osd_cdb_head { /*80*/ /*160 v1*/ -/*184 v2*/ -struct osd_security_parameters { -/*160*/u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE]; +struct osdv1_security_parameters { +/*160*/u8 integrity_check_value[OSDv1_CRYPTO_KEYID_SIZE]; /*180*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE]; /*192*/osd_cdb_offset data_in_integrity_check_offset; /*196*/osd_cdb_offset data_out_integrity_check_offset; } __packed; /*200 v1*/ -/*224 v2*/ -/* FIXME: osdv2_security_parameters */ +/*184 v2*/ +struct osdv2_security_parameters { +/*184*/u8 integrity_check_value[OSDv2_CRYPTO_KEYID_SIZE]; +/*216*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE]; +/*228*/osd_cdb_offset data_in_integrity_check_offset; +/*232*/osd_cdb_offset data_out_integrity_check_offset; +} __packed; +/*236 v2*/ + +struct osd_security_parameters { + union { + struct osdv1_security_parameters v1; + struct osdv2_security_parameters v2; + }; +}; struct osdv1_cdb { struct osd_cdb_head h; u8 caps[OSDv1_CAP_LEN]; - struct osd_security_parameters sec_params; + struct osdv1_security_parameters sec_params; } __packed; struct osdv2_cdb { struct osd_cdb_head h; u8 caps[OSD_CAP_LEN]; - struct osd_security_parameters sec_params; - /* FIXME: osdv2_security_parameters */ + struct osdv2_security_parameters sec_params; } __packed; struct osd_cdb { @@ -301,14 +317,25 @@ struct osd_attributes_list_attrid { } __packed; /* + * NOTE: v1: is not aligned. + */ +struct osdv1_attributes_list_element { + __be32 attr_page; + __be32 attr_id; + __be16 attr_bytes; /* valid bytes at attr_val without padding */ + u8 attr_val[0]; +} __packed; + +/* * osd2r03: 7.1.3.3 List entry format for retrieved attributes and * for setting attributes - * NOTE: v2 is 8-bytes aligned, v1 is not aligned. + * NOTE: v2 is 8-bytes aligned */ -struct osd_attributes_list_element { +struct osdv2_attributes_list_element { __be32 attr_page; __be32 attr_id; - __be16 attr_bytes; + u8 reserved[6]; + __be16 attr_bytes; /* valid bytes at attr_val without padding */ u8 attr_val[0]; } __packed; @@ -324,13 +351,13 @@ enum { static inline unsigned osdv1_attr_list_elem_size(unsigned len) { - return ALIGN(len + sizeof(struct osd_attributes_list_element), + return ALIGN(len + sizeof(struct osdv1_attributes_list_element), OSDv1_ATTRIBUTES_ELEM_ALIGN); } static inline unsigned osdv2_attr_list_elem_size(unsigned len) { - return ALIGN(len + sizeof(struct osd_attributes_list_element), + return ALIGN(len + sizeof(struct osdv2_attributes_list_element), OSD_ATTRIBUTES_ELEM_ALIGN); } @@ -419,15 +446,35 @@ struct osd_data_out_integrity_info { __be64 data_bytes; __be64 set_attributes_bytes; __be64 get_attributes_bytes; - __be64 integrity_check_value; + __u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE]; } __packed; +/* Same osd_data_out_integrity_info is used for OSD2/OSD1. The only difference + * Is the sizeof the structure since in OSD1 the last array is smaller. Use + * below for version independent handling of this structure + */ +static inline int osd_data_out_integrity_info_sizeof(bool is_ver1) +{ + return sizeof(struct osd_data_out_integrity_info) - + (is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE)); +} + struct osd_data_in_integrity_info { __be64 data_bytes; __be64 retrieved_attributes_bytes; - __be64 integrity_check_value; + __u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE]; } __packed; +/* Same osd_data_in_integrity_info is used for OSD2/OSD1. The only difference + * Is the sizeof the structure since in OSD1 the last array is smaller. Use + * below for version independent handling of this structure + */ +static inline int osd_data_in_integrity_info_sizeof(bool is_ver1) +{ + return sizeof(struct osd_data_in_integrity_info) - + (is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE)); +} + struct osd_timestamp { u8 time[6]; /* number of milliseconds since 1/1/1970 UT (big endian) */ } __packed; @@ -477,7 +524,7 @@ enum osd_capability_bit_masks { OSD_SEC_CAP_NONE1 = BIT(8), OSD_SEC_CAP_NONE2 = BIT(9), - OSD_SEC_CAP_NONE3 = BIT(10), + OSD_SEC_GBL_REM = BIT(10), /*v2 only*/ OSD_SEC_CAP_QUERY = BIT(11), /*v2 only*/ OSD_SEC_CAP_M_OBJECT = BIT(12), /*v2 only*/ OSD_SEC_CAP_POL_SEC = BIT(13), @@ -552,8 +599,7 @@ struct osdv1_capability { struct osd_capability { struct osd_capability_head h; -/* struct osd_cap_object_descriptor od;*/ - struct osdv1_cap_object_descriptor od; /* FIXME: Pete rev-001 sup */ + struct osd_cap_object_descriptor od; } __packed; /** diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/kernel/sysctl.c linux-2.6.30-rc4-git/kernel/sysctl.c --- linux-2.6.30-rc4/kernel/sysctl.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/kernel/sysctl.c 2009-05-13 09:46:19.000000000 +0200 @@ -103,6 +103,9 @@ static unsigned long one_ul = 1; static int one_hundred = 100; static int one_thousand = 1000; +/* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */ +static unsigned long dirty_bytes_min = 2 * PAGE_SIZE; + /* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */ static int maxolduid = 65535; static int minolduid; @@ -1006,7 +1009,7 @@ static struct ctl_table vm_table[] = { .mode = 0644, .proc_handler = &dirty_bytes_handler, .strategy = &sysctl_intvec, - .extra1 = &one_ul, + .extra1 = &dirty_bytes_min, }, { .procname = "dirty_writeback_centisecs", diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/MAINTAINERS linux-2.6.30-rc4-git/MAINTAINERS --- linux-2.6.30-rc4/MAINTAINERS 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/MAINTAINERS 2009-05-13 09:46:19.000000000 +0200 @@ -4189,7 +4189,7 @@ P: Joel Becker M: joel.becker@oracle.com L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers) W: http://oss.oracle.com/projects/ocfs2/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git S: Supported F: Documentation/filesystems/ocfs2.txt F: Documentation/filesystems/dlmfs.txt @@ -4521,6 +4521,19 @@ M: jim@jtan.com L: cbe-oss-dev@ozlabs.org S: Maintained +PTRACE SUPPORT +P: Roland McGrath +M: roland@redhat.com +P: Oleg Nesterov +M: oleg@redhat.com +L: linux-kernel@vger.kernel.org +S: Maintained +F: include/asm-generic/syscall.h +F: include/linux/ptrace.h +F: include/linux/regset.h +F: include/linux/tracehook.h +F: kernel/ptrace.c + PVRUSB2 VIDEO4LINUX DRIVER P: Mike Isely M: isely@pobox.com @@ -4666,13 +4679,13 @@ F: kernel/rcutorture.c RDC R-321X SoC P: Florian Fainelli -M: florian.fainelli@telecomint.eu +M: florian@openwrt.org L: linux-kernel@vger.kernel.org S: Maintained RDC R6040 FAST ETHERNET DRIVER P: Florian Fainelli -M: florian.fainelli@telecomint.eu +M: florian@openwrt.org L: netdev@vger.kernel.org S: Maintained F: drivers/net/r6040.c diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/Makefile linux-2.6.30-rc4-git/Makefile --- linux-2.6.30-rc4/Makefile 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/Makefile 2009-05-13 09:46:19.000000000 +0200 @@ -1293,7 +1293,7 @@ help: @echo ' dir/ - Build all files in dir and below' @echo ' dir/file.[ois] - Build specified target only' @echo ' dir/file.ko - Build module including final link' - @echo ' prepare - Set up for building external modules' + @echo ' modules_prepare - Set up for building external modules' @echo ' tags/TAGS - Generate tags file for editors' @echo ' cscope - Generate cscope index' @echo ' kernelrelease - Output the release version string' @@ -1421,7 +1421,9 @@ $(clean-dirs): $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) clean: rm-dirs := $(MODVERDIR) -clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers +clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \ + $(KBUILD_EXTMOD)/Module.markers \ + $(KBUILD_EXTMOD)/modules.order clean: $(clean-dirs) $(call cmd,rmdirs) $(call cmd,rmfiles) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/mm/memcontrol.c linux-2.6.30-rc4-git/mm/memcontrol.c --- linux-2.6.30-rc4/mm/memcontrol.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/mm/memcontrol.c 2009-05-13 09:46:19.000000000 +0200 @@ -1024,9 +1024,7 @@ static struct mem_cgroup *try_get_mem_cg return NULL; pc = lookup_page_cgroup(page); - /* - * Used bit of swapcache is solid under page lock. - */ + lock_page_cgroup(pc); if (PageCgroupUsed(pc)) { mem = pc->mem_cgroup; if (mem && !css_tryget(&mem->css)) @@ -1040,6 +1038,7 @@ static struct mem_cgroup *try_get_mem_cg mem = NULL; rcu_read_unlock(); } + unlock_page_cgroup(pc); return mem; } @@ -1618,37 +1617,28 @@ void mem_cgroup_end_migration(struct mem } /* - * A call to try to shrink memory usage under specified resource controller. - * This is typically used for page reclaiming for shmem for reducing side - * effect of page allocation from shmem, which is used by some mem_cgroup. + * A call to try to shrink memory usage on charge failure at shmem's swapin. + * Calling hierarchical_reclaim is not enough because we should update + * last_oom_jiffies to prevent pagefault_out_of_memory from invoking global OOM. + * Moreover considering hierarchy, we should reclaim from the mem_over_limit, + * not from the memcg which this page would be charged to. + * try_charge_swapin does all of these works properly. */ -int mem_cgroup_shrink_usage(struct page *page, +int mem_cgroup_shmem_charge_fallback(struct page *page, struct mm_struct *mm, gfp_t gfp_mask) { struct mem_cgroup *mem = NULL; - int progress = 0; - int retry = MEM_CGROUP_RECLAIM_RETRIES; + int ret; if (mem_cgroup_disabled()) return 0; - if (page) - mem = try_get_mem_cgroup_from_swapcache(page); - if (!mem && mm) - mem = try_get_mem_cgroup_from_mm(mm); - if (unlikely(!mem)) - return 0; - do { - progress = mem_cgroup_hierarchical_reclaim(mem, - gfp_mask, true, false); - progress += mem_cgroup_check_under_limit(mem); - } while (!progress && --retry); + ret = mem_cgroup_try_charge_swapin(mm, page, gfp_mask, &mem); + if (!ret) + mem_cgroup_cancel_charge_swapin(mem); /* it does !mem check */ - css_put(&mem->css); - if (!retry) - return -ENOMEM; - return 0; + return ret; } static DEFINE_MUTEX(set_limit_mutex); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/mm/memory.c linux-2.6.30-rc4-git/mm/memory.c --- linux-2.6.30-rc4/mm/memory.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/mm/memory.c 2009-05-13 09:46:19.000000000 +0200 @@ -1971,6 +1971,15 @@ static int do_wp_page(struct mm_struct * ret = tmp; goto unwritable_page; } + if (unlikely(!(tmp & VM_FAULT_LOCKED))) { + lock_page(old_page); + if (!old_page->mapping) { + ret = 0; /* retry the fault */ + unlock_page(old_page); + goto unwritable_page; + } + } else + VM_BUG_ON(!PageLocked(old_page)); /* * Since we dropped the lock we need to revalidate @@ -1980,9 +1989,11 @@ static int do_wp_page(struct mm_struct * */ page_table = pte_offset_map_lock(mm, pmd, address, &ptl); - page_cache_release(old_page); - if (!pte_same(*page_table, orig_pte)) + if (!pte_same(*page_table, orig_pte)) { + unlock_page(old_page); + page_cache_release(old_page); goto unlock; + } page_mkwrite = 1; } @@ -2094,9 +2105,6 @@ gotten: unlock: pte_unmap_unlock(page_table, ptl); if (dirty_page) { - if (vma->vm_file) - file_update_time(vma->vm_file); - /* * Yes, Virginia, this is actually required to prevent a race * with clear_page_dirty_for_io() from clearing the page dirty @@ -2105,16 +2113,41 @@ unlock: * * do_no_page is protected similarly. */ - wait_on_page_locked(dirty_page); - set_page_dirty_balance(dirty_page, page_mkwrite); + if (!page_mkwrite) { + wait_on_page_locked(dirty_page); + set_page_dirty_balance(dirty_page, page_mkwrite); + } put_page(dirty_page); + if (page_mkwrite) { + struct address_space *mapping = dirty_page->mapping; + + set_page_dirty(dirty_page); + unlock_page(dirty_page); + page_cache_release(dirty_page); + if (mapping) { + /* + * Some device drivers do not set page.mapping + * but still dirty their pages + */ + balance_dirty_pages_ratelimited(mapping); + } + } + + /* file_update_time outside page_lock */ + if (vma->vm_file) + file_update_time(vma->vm_file); } return ret; oom_free_new: page_cache_release(new_page); oom: - if (old_page) + if (old_page) { + if (page_mkwrite) { + unlock_page(old_page); + page_cache_release(old_page); + } page_cache_release(old_page); + } return VM_FAULT_OOM; unwritable_page: @@ -2458,8 +2491,7 @@ static int do_swap_page(struct mm_struct if (mem_cgroup_try_charge_swapin(mm, page, GFP_KERNEL, &ptr)) { ret = VM_FAULT_OOM; - unlock_page(page); - goto out; + goto out_page; } /* @@ -2521,6 +2553,7 @@ out: out_nomap: mem_cgroup_cancel_charge_swapin(ptr); pte_unmap_unlock(page_table, ptl); +out_page: unlock_page(page); page_cache_release(page); return ret; @@ -2664,27 +2697,22 @@ static int __do_fault(struct mm_struct * int tmp; unlock_page(page); - vmf.flags |= FAULT_FLAG_MKWRITE; + vmf.flags = FAULT_FLAG_WRITE|FAULT_FLAG_MKWRITE; tmp = vma->vm_ops->page_mkwrite(vma, &vmf); if (unlikely(tmp & (VM_FAULT_ERROR | VM_FAULT_NOPAGE))) { ret = tmp; - anon = 1; /* no anon but release vmf.page */ - goto out_unlocked; - } - lock_page(page); - /* - * XXX: this is not quite right (racy vs - * invalidate) to unlock and relock the page - * like this, however a better fix requires - * reworking page_mkwrite locking API, which - * is better done later. - */ - if (!page->mapping) { - ret = 0; - anon = 1; /* no anon but release vmf.page */ - goto out; + goto unwritable_page; } + if (unlikely(!(tmp & VM_FAULT_LOCKED))) { + lock_page(page); + if (!page->mapping) { + ret = 0; /* retry the fault */ + unlock_page(page); + goto unwritable_page; + } + } else + VM_BUG_ON(!PageLocked(page)); page_mkwrite = 1; } } @@ -2736,19 +2764,35 @@ static int __do_fault(struct mm_struct * pte_unmap_unlock(page_table, ptl); out: - unlock_page(vmf.page); -out_unlocked: - if (anon) - page_cache_release(vmf.page); - else if (dirty_page) { - if (vma->vm_file) - file_update_time(vma->vm_file); + if (dirty_page) { + struct address_space *mapping = page->mapping; - set_page_dirty_balance(dirty_page, page_mkwrite); + if (set_page_dirty(dirty_page)) + page_mkwrite = 1; + unlock_page(dirty_page); put_page(dirty_page); + if (page_mkwrite && mapping) { + /* + * Some device drivers do not set page.mapping but still + * dirty their pages + */ + balance_dirty_pages_ratelimited(mapping); + } + + /* file_update_time outside page_lock */ + if (vma->vm_file) + file_update_time(vma->vm_file); + } else { + unlock_page(vmf.page); + if (anon) + page_cache_release(vmf.page); } return ret; + +unwritable_page: + page_cache_release(page); + return ret; } static int do_linear_fault(struct mm_struct *mm, struct vm_area_struct *vma, diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/mm/mmap.c linux-2.6.30-rc4-git/mm/mmap.c --- linux-2.6.30-rc4/mm/mmap.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/mm/mmap.c 2009-05-13 09:46:19.000000000 +0200 @@ -85,7 +85,7 @@ EXPORT_SYMBOL(vm_get_page_prot); int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */ int sysctl_overcommit_ratio = 50; /* default is 50% */ int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT; -atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0); +struct percpu_counter vm_committed_as; /* * Check that a process has enough memory to allocate a new virtual @@ -179,11 +179,7 @@ int __vm_enough_memory(struct mm_struct if (mm) allowed -= mm->total_vm / 32; - /* - * cast `allowed' as a signed long because vm_committed_space - * sometimes has a negative value - */ - if (atomic_long_read(&vm_committed_space) < (long)allowed) + if (percpu_counter_read_positive(&vm_committed_as) < allowed) return 0; error: vm_unacct_memory(pages); @@ -2481,4 +2477,8 @@ void mm_drop_all_locks(struct mm_struct */ void __init mmap_init(void) { + int ret; + + ret = percpu_counter_init(&vm_committed_as, 0); + VM_BUG_ON(ret); } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/mm/nommu.c linux-2.6.30-rc4-git/mm/nommu.c --- linux-2.6.30-rc4/mm/nommu.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/mm/nommu.c 2009-05-13 09:46:19.000000000 +0200 @@ -62,7 +62,7 @@ void *high_memory; struct page *mem_map; unsigned long max_mapnr; unsigned long num_physpages; -atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0); +struct percpu_counter vm_committed_as; int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */ int sysctl_overcommit_ratio = 50; /* default is 50% */ int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT; @@ -463,6 +463,10 @@ SYSCALL_DEFINE1(brk, unsigned long, brk) */ void __init mmap_init(void) { + int ret; + + ret = percpu_counter_init(&vm_committed_as, 0); + VM_BUG_ON(ret); vm_region_jar = KMEM_CACHE(vm_region, SLAB_PANIC); } @@ -1847,12 +1851,9 @@ int __vm_enough_memory(struct mm_struct if (mm) allowed -= mm->total_vm / 32; - /* - * cast `allowed' as a signed long because vm_committed_space - * sometimes has a negative value - */ - if (atomic_long_read(&vm_committed_space) < (long)allowed) + if (percpu_counter_read_positive(&vm_committed_as) < allowed) return 0; + error: vm_unacct_memory(pages); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/mm/shmem.c linux-2.6.30-rc4-git/mm/shmem.c --- linux-2.6.30-rc4/mm/shmem.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/mm/shmem.c 2009-05-13 09:46:19.000000000 +0200 @@ -1340,8 +1340,12 @@ repeat: shmem_swp_unmap(entry); spin_unlock(&info->lock); if (error == -ENOMEM) { - /* allow reclaim from this memory cgroup */ - error = mem_cgroup_shrink_usage(swappage, + /* + * reclaim from proper memory cgroup and + * call memcg's OOM if needed. + */ + error = mem_cgroup_shmem_charge_fallback( + swappage, current->mm, gfp); if (error) { diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/mm/swap.c linux-2.6.30-rc4-git/mm/swap.c --- linux-2.6.30-rc4/mm/swap.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/mm/swap.c 2009-05-13 09:46:19.000000000 +0200 @@ -491,49 +491,6 @@ unsigned pagevec_lookup_tag(struct pagev EXPORT_SYMBOL(pagevec_lookup_tag); -#ifdef CONFIG_SMP -/* - * We tolerate a little inaccuracy to avoid ping-ponging the counter between - * CPUs - */ -#define ACCT_THRESHOLD max(16, NR_CPUS * 2) - -static DEFINE_PER_CPU(long, committed_space); - -void vm_acct_memory(long pages) -{ - long *local; - - preempt_disable(); - local = &__get_cpu_var(committed_space); - *local += pages; - if (*local > ACCT_THRESHOLD || *local < -ACCT_THRESHOLD) { - atomic_long_add(*local, &vm_committed_space); - *local = 0; - } - preempt_enable(); -} - -#ifdef CONFIG_HOTPLUG_CPU - -/* Drop the CPU's cached committed space back into the central pool. */ -static int cpu_swap_callback(struct notifier_block *nfb, - unsigned long action, - void *hcpu) -{ - long *committed; - - committed = &per_cpu(committed_space, (long)hcpu); - if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) { - atomic_long_add(*committed, &vm_committed_space); - *committed = 0; - drain_cpu_pagevecs((long)hcpu); - } - return NOTIFY_OK; -} -#endif /* CONFIG_HOTPLUG_CPU */ -#endif /* CONFIG_SMP */ - /* * Perform any setup for the swap system */ @@ -554,7 +511,4 @@ void __init swap_setup(void) * Right now other parts of the system means that we * _really_ don't want to cluster much more */ -#ifdef CONFIG_HOTPLUG_CPU - hotcpu_notifier(cpu_swap_callback, 0); -#endif } diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/mm/vmscan.c linux-2.6.30-rc4-git/mm/vmscan.c --- linux-2.6.30-rc4/mm/vmscan.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/mm/vmscan.c 2009-05-13 09:46:19.000000000 +0200 @@ -1471,7 +1471,7 @@ static void shrink_zone(int priority, st for_each_evictable_lru(l) { int file = is_file_lru(l); - int scan; + unsigned long scan; scan = zone_nr_pages(zone, sc, l); if (priority) { diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/net/sunrpc/xprt.c linux-2.6.30-rc4-git/net/sunrpc/xprt.c --- linux-2.6.30-rc4/net/sunrpc/xprt.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/net/sunrpc/xprt.c 2009-05-13 09:46:19.000000000 +0200 @@ -672,10 +672,8 @@ xprt_init_autodisconnect(unsigned long d if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) goto out_abort; spin_unlock(&xprt->transport_lock); - if (xprt_connecting(xprt)) - xprt_release_write(xprt, NULL); - else - queue_work(rpciod_workqueue, &xprt->task_cleanup); + set_bit(XPRT_CONNECTION_CLOSE, &xprt->state); + queue_work(rpciod_workqueue, &xprt->task_cleanup); return; out_abort: spin_unlock(&xprt->transport_lock); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/net/sunrpc/xprtsock.c linux-2.6.30-rc4-git/net/sunrpc/xprtsock.c --- linux-2.6.30-rc4/net/sunrpc/xprtsock.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/net/sunrpc/xprtsock.c 2009-05-13 09:46:19.000000000 +0200 @@ -807,6 +807,9 @@ static void xs_reset_transport(struct so * * This is used when all requests are complete; ie, no DRC state remains * on the server we want to save. + * + * The caller _must_ be holding XPRT_LOCKED in order to avoid issues with + * xs_reset_transport() zeroing the socket from underneath a writer. */ static void xs_close(struct rpc_xprt *xprt) { @@ -824,6 +827,14 @@ static void xs_close(struct rpc_xprt *xp xprt_disconnect_done(xprt); } +static void xs_tcp_close(struct rpc_xprt *xprt) +{ + if (test_and_clear_bit(XPRT_CONNECTION_CLOSE, &xprt->state)) + xs_close(xprt); + else + xs_tcp_shutdown(xprt); +} + /** * xs_destroy - prepare to shutdown a transport * @xprt: doomed transport @@ -1772,6 +1783,15 @@ static void xs_tcp_setup_socket(struct r xprt, -status, xprt_connected(xprt), sock->sk->sk_state); switch (status) { + default: + printk("%s: connect returned unhandled error %d\n", + __func__, status); + case -EADDRNOTAVAIL: + /* We're probably in TIME_WAIT. Get rid of existing socket, + * and retry + */ + set_bit(XPRT_CONNECTION_CLOSE, &xprt->state); + xprt_force_disconnect(xprt); case -ECONNREFUSED: case -ECONNRESET: case -ENETUNREACH: @@ -1782,10 +1802,6 @@ static void xs_tcp_setup_socket(struct r xprt_clear_connecting(xprt); return; } - /* get rid of existing socket, and retry */ - xs_tcp_shutdown(xprt); - printk("%s: connect returned unhandled error %d\n", - __func__, status); out_eagain: status = -EAGAIN; out: @@ -1994,7 +2010,7 @@ static struct rpc_xprt_ops xs_tcp_ops = .buf_free = rpc_free, .send_request = xs_tcp_send_request, .set_retrans_timeout = xprt_set_retrans_timeout_def, - .close = xs_tcp_shutdown, + .close = xs_tcp_close, .destroy = xs_destroy, .print_stats = xs_tcp_print_stats, }; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/checks.c linux-2.6.30-rc4-git/scripts/dtc/checks.c --- linux-2.6.30-rc4/scripts/dtc/checks.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/checks.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,587 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2007. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +#ifdef TRACE_CHECKS +#define TRACE(c, ...) \ + do { \ + fprintf(stderr, "=== %s: ", (c)->name); \ + fprintf(stderr, __VA_ARGS__); \ + fprintf(stderr, "\n"); \ + } while (0) +#else +#define TRACE(c, fmt, ...) do { } while (0) +#endif + +enum checklevel { + IGNORE = 0, + WARN = 1, + ERROR = 2, +}; + +enum checkstatus { + UNCHECKED = 0, + PREREQ, + PASSED, + FAILED, +}; + +struct check; + +typedef void (*tree_check_fn)(struct check *c, struct node *dt); +typedef void (*node_check_fn)(struct check *c, struct node *dt, struct node *node); +typedef void (*prop_check_fn)(struct check *c, struct node *dt, + struct node *node, struct property *prop); + +struct check { + const char *name; + tree_check_fn tree_fn; + node_check_fn node_fn; + prop_check_fn prop_fn; + void *data; + enum checklevel level; + enum checkstatus status; + int inprogress; + int num_prereqs; + struct check **prereq; +}; + +#define CHECK(nm, tfn, nfn, pfn, d, lvl, ...) \ + static struct check *nm##_prereqs[] = { __VA_ARGS__ }; \ + static struct check nm = { \ + .name = #nm, \ + .tree_fn = (tfn), \ + .node_fn = (nfn), \ + .prop_fn = (pfn), \ + .data = (d), \ + .level = (lvl), \ + .status = UNCHECKED, \ + .num_prereqs = ARRAY_SIZE(nm##_prereqs), \ + .prereq = nm##_prereqs, \ + }; + +#define TREE_CHECK(nm, d, lvl, ...) \ + CHECK(nm, check_##nm, NULL, NULL, d, lvl, __VA_ARGS__) +#define NODE_CHECK(nm, d, lvl, ...) \ + CHECK(nm, NULL, check_##nm, NULL, d, lvl, __VA_ARGS__) +#define PROP_CHECK(nm, d, lvl, ...) \ + CHECK(nm, NULL, NULL, check_##nm, d, lvl, __VA_ARGS__) +#define BATCH_CHECK(nm, lvl, ...) \ + CHECK(nm, NULL, NULL, NULL, NULL, lvl, __VA_ARGS__) + +#ifdef __GNUC__ +static inline void check_msg(struct check *c, const char *fmt, ...) __attribute__((format (printf, 2, 3))); +#endif +static inline void check_msg(struct check *c, const char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + + if ((c->level < WARN) || (c->level <= quiet)) + return; /* Suppress message */ + + fprintf(stderr, "%s (%s): ", + (c->level == ERROR) ? "ERROR" : "Warning", c->name); + vfprintf(stderr, fmt, ap); + fprintf(stderr, "\n"); +} + +#define FAIL(c, ...) \ + do { \ + TRACE((c), "\t\tFAILED at %s:%d", __FILE__, __LINE__); \ + (c)->status = FAILED; \ + check_msg((c), __VA_ARGS__); \ + } while (0) + +static void check_nodes_props(struct check *c, struct node *dt, struct node *node) +{ + struct node *child; + struct property *prop; + + TRACE(c, "%s", node->fullpath); + if (c->node_fn) + c->node_fn(c, dt, node); + + if (c->prop_fn) + for_each_property(node, prop) { + TRACE(c, "%s\t'%s'", node->fullpath, prop->name); + c->prop_fn(c, dt, node, prop); + } + + for_each_child(node, child) + check_nodes_props(c, dt, child); +} + +static int run_check(struct check *c, struct node *dt) +{ + int error = 0; + int i; + + assert(!c->inprogress); + + if (c->status != UNCHECKED) + goto out; + + c->inprogress = 1; + + for (i = 0; i < c->num_prereqs; i++) { + struct check *prq = c->prereq[i]; + error |= run_check(prq, dt); + if (prq->status != PASSED) { + c->status = PREREQ; + check_msg(c, "Failed prerequisite '%s'", + c->prereq[i]->name); + } + } + + if (c->status != UNCHECKED) + goto out; + + if (c->node_fn || c->prop_fn) + check_nodes_props(c, dt, dt); + + if (c->tree_fn) + c->tree_fn(c, dt); + if (c->status == UNCHECKED) + c->status = PASSED; + + TRACE(c, "\tCompleted, status %d", c->status); + +out: + c->inprogress = 0; + if ((c->status != PASSED) && (c->level == ERROR)) + error = 1; + return error; +} + +/* + * Utility check functions + */ + +static void check_is_string(struct check *c, struct node *root, + struct node *node) +{ + struct property *prop; + char *propname = c->data; + + prop = get_property(node, propname); + if (!prop) + return; /* Not present, assumed ok */ + + if (!data_is_one_string(prop->val)) + FAIL(c, "\"%s\" property in %s is not a string", + propname, node->fullpath); +} +#define CHECK_IS_STRING(nm, propname, lvl) \ + CHECK(nm, NULL, check_is_string, NULL, (propname), (lvl)) + +static void check_is_cell(struct check *c, struct node *root, + struct node *node) +{ + struct property *prop; + char *propname = c->data; + + prop = get_property(node, propname); + if (!prop) + return; /* Not present, assumed ok */ + + if (prop->val.len != sizeof(cell_t)) + FAIL(c, "\"%s\" property in %s is not a single cell", + propname, node->fullpath); +} +#define CHECK_IS_CELL(nm, propname, lvl) \ + CHECK(nm, NULL, check_is_cell, NULL, (propname), (lvl)) + +/* + * Structural check functions + */ + +static void check_duplicate_node_names(struct check *c, struct node *dt, + struct node *node) +{ + struct node *child, *child2; + + for_each_child(node, child) + for (child2 = child->next_sibling; + child2; + child2 = child2->next_sibling) + if (streq(child->name, child2->name)) + FAIL(c, "Duplicate node name %s", + child->fullpath); +} +NODE_CHECK(duplicate_node_names, NULL, ERROR); + +static void check_duplicate_property_names(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop, *prop2; + + for_each_property(node, prop) + for (prop2 = prop->next; prop2; prop2 = prop2->next) + if (streq(prop->name, prop2->name)) + FAIL(c, "Duplicate property name %s in %s", + prop->name, node->fullpath); +} +NODE_CHECK(duplicate_property_names, NULL, ERROR); + +#define LOWERCASE "abcdefghijklmnopqrstuvwxyz" +#define UPPERCASE "ABCDEFGHIJKLMNOPQRSTUVWXYZ" +#define DIGITS "0123456789" +#define PROPNODECHARS LOWERCASE UPPERCASE DIGITS ",._+*#?-" + +static void check_node_name_chars(struct check *c, struct node *dt, + struct node *node) +{ + int n = strspn(node->name, c->data); + + if (n < strlen(node->name)) + FAIL(c, "Bad character '%c' in node %s", + node->name[n], node->fullpath); +} +NODE_CHECK(node_name_chars, PROPNODECHARS "@", ERROR); + +static void check_node_name_format(struct check *c, struct node *dt, + struct node *node) +{ + if (strchr(get_unitname(node), '@')) + FAIL(c, "Node %s has multiple '@' characters in name", + node->fullpath); +} +NODE_CHECK(node_name_format, NULL, ERROR, &node_name_chars); + +static void check_property_name_chars(struct check *c, struct node *dt, + struct node *node, struct property *prop) +{ + int n = strspn(prop->name, c->data); + + if (n < strlen(prop->name)) + FAIL(c, "Bad character '%c' in property name \"%s\", node %s", + prop->name[n], prop->name, node->fullpath); +} +PROP_CHECK(property_name_chars, PROPNODECHARS, ERROR); + +static void check_explicit_phandles(struct check *c, struct node *root, + struct node *node) +{ + struct property *prop; + struct node *other; + cell_t phandle; + + prop = get_property(node, "linux,phandle"); + if (! prop) + return; /* No phandle, that's fine */ + + if (prop->val.len != sizeof(cell_t)) { + FAIL(c, "%s has bad length (%d) linux,phandle property", + node->fullpath, prop->val.len); + return; + } + + phandle = propval_cell(prop); + if ((phandle == 0) || (phandle == -1)) { + FAIL(c, "%s has invalid linux,phandle value 0x%x", + node->fullpath, phandle); + return; + } + + other = get_node_by_phandle(root, phandle); + if (other) { + FAIL(c, "%s has duplicated phandle 0x%x (seen before at %s)", + node->fullpath, phandle, other->fullpath); + return; + } + + node->phandle = phandle; +} +NODE_CHECK(explicit_phandles, NULL, ERROR); + +static void check_name_properties(struct check *c, struct node *root, + struct node *node) +{ + struct property **pp, *prop = NULL; + + for (pp = &node->proplist; *pp; pp = &((*pp)->next)) + if (streq((*pp)->name, "name")) { + prop = *pp; + break; + } + + if (!prop) + return; /* No name property, that's fine */ + + if ((prop->val.len != node->basenamelen+1) + || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) { + FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead" + " of base node name)", node->fullpath, prop->val.val); + } else { + /* The name property is correct, and therefore redundant. + * Delete it */ + *pp = prop->next; + free(prop->name); + data_free(prop->val); + free(prop); + } +} +CHECK_IS_STRING(name_is_string, "name", ERROR); +NODE_CHECK(name_properties, NULL, ERROR, &name_is_string); + +/* + * Reference fixup functions + */ + +static void fixup_phandle_references(struct check *c, struct node *dt, + struct node *node, struct property *prop) +{ + struct marker *m = prop->val.markers; + struct node *refnode; + cell_t phandle; + + for_each_marker_of_type(m, REF_PHANDLE) { + assert(m->offset + sizeof(cell_t) <= prop->val.len); + + refnode = get_node_by_ref(dt, m->ref); + if (! refnode) { + FAIL(c, "Reference to non-existent node or label \"%s\"\n", + m->ref); + continue; + } + + phandle = get_node_phandle(dt, refnode); + *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle); + } +} +CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR, + &duplicate_node_names, &explicit_phandles); + +static void fixup_path_references(struct check *c, struct node *dt, + struct node *node, struct property *prop) +{ + struct marker *m = prop->val.markers; + struct node *refnode; + char *path; + + for_each_marker_of_type(m, REF_PATH) { + assert(m->offset <= prop->val.len); + + refnode = get_node_by_ref(dt, m->ref); + if (!refnode) { + FAIL(c, "Reference to non-existent node or label \"%s\"\n", + m->ref); + continue; + } + + path = refnode->fullpath; + prop->val = data_insert_at_marker(prop->val, m, path, + strlen(path) + 1); + } +} +CHECK(path_references, NULL, NULL, fixup_path_references, NULL, ERROR, + &duplicate_node_names); + +/* + * Semantic checks + */ +CHECK_IS_CELL(address_cells_is_cell, "#address-cells", WARN); +CHECK_IS_CELL(size_cells_is_cell, "#size-cells", WARN); +CHECK_IS_CELL(interrupt_cells_is_cell, "#interrupt-cells", WARN); + +CHECK_IS_STRING(device_type_is_string, "device_type", WARN); +CHECK_IS_STRING(model_is_string, "model", WARN); +CHECK_IS_STRING(status_is_string, "status", WARN); + +static void fixup_addr_size_cells(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop; + + node->addr_cells = -1; + node->size_cells = -1; + + prop = get_property(node, "#address-cells"); + if (prop) + node->addr_cells = propval_cell(prop); + + prop = get_property(node, "#size-cells"); + if (prop) + node->size_cells = propval_cell(prop); +} +CHECK(addr_size_cells, NULL, fixup_addr_size_cells, NULL, NULL, WARN, + &address_cells_is_cell, &size_cells_is_cell); + +#define node_addr_cells(n) \ + (((n)->addr_cells == -1) ? 2 : (n)->addr_cells) +#define node_size_cells(n) \ + (((n)->size_cells == -1) ? 1 : (n)->size_cells) + +static void check_reg_format(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop; + int addr_cells, size_cells, entrylen; + + prop = get_property(node, "reg"); + if (!prop) + return; /* No "reg", that's fine */ + + if (!node->parent) { + FAIL(c, "Root node has a \"reg\" property"); + return; + } + + if (prop->val.len == 0) + FAIL(c, "\"reg\" property in %s is empty", node->fullpath); + + addr_cells = node_addr_cells(node->parent); + size_cells = node_size_cells(node->parent); + entrylen = (addr_cells + size_cells) * sizeof(cell_t); + + if ((prop->val.len % entrylen) != 0) + FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) " + "(#address-cells == %d, #size-cells == %d)", + node->fullpath, prop->val.len, addr_cells, size_cells); +} +NODE_CHECK(reg_format, NULL, WARN, &addr_size_cells); + +static void check_ranges_format(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop; + int c_addr_cells, p_addr_cells, c_size_cells, p_size_cells, entrylen; + + prop = get_property(node, "ranges"); + if (!prop) + return; + + if (!node->parent) { + FAIL(c, "Root node has a \"ranges\" property"); + return; + } + + p_addr_cells = node_addr_cells(node->parent); + p_size_cells = node_size_cells(node->parent); + c_addr_cells = node_addr_cells(node); + c_size_cells = node_size_cells(node); + entrylen = (p_addr_cells + c_addr_cells + c_size_cells) * sizeof(cell_t); + + if (prop->val.len == 0) { + if (p_addr_cells != c_addr_cells) + FAIL(c, "%s has empty \"ranges\" property but its " + "#address-cells (%d) differs from %s (%d)", + node->fullpath, c_addr_cells, node->parent->fullpath, + p_addr_cells); + if (p_size_cells != c_size_cells) + FAIL(c, "%s has empty \"ranges\" property but its " + "#size-cells (%d) differs from %s (%d)", + node->fullpath, c_size_cells, node->parent->fullpath, + p_size_cells); + } else if ((prop->val.len % entrylen) != 0) { + FAIL(c, "\"ranges\" property in %s has invalid length (%d bytes) " + "(parent #address-cells == %d, child #address-cells == %d, " + "#size-cells == %d)", node->fullpath, prop->val.len, + p_addr_cells, c_addr_cells, c_size_cells); + } +} +NODE_CHECK(ranges_format, NULL, WARN, &addr_size_cells); + +/* + * Style checks + */ +static void check_avoid_default_addr_size(struct check *c, struct node *dt, + struct node *node) +{ + struct property *reg, *ranges; + + if (!node->parent) + return; /* Ignore root node */ + + reg = get_property(node, "reg"); + ranges = get_property(node, "ranges"); + + if (!reg && !ranges) + return; + + if ((node->parent->addr_cells == -1)) + FAIL(c, "Relying on default #address-cells value for %s", + node->fullpath); + + if ((node->parent->size_cells == -1)) + FAIL(c, "Relying on default #size-cells value for %s", + node->fullpath); +} +NODE_CHECK(avoid_default_addr_size, NULL, WARN, &addr_size_cells); + +static void check_obsolete_chosen_interrupt_controller(struct check *c, + struct node *dt) +{ + struct node *chosen; + struct property *prop; + + chosen = get_node_by_path(dt, "/chosen"); + if (!chosen) + return; + + prop = get_property(chosen, "interrupt-controller"); + if (prop) + FAIL(c, "/chosen has obsolete \"interrupt-controller\" " + "property"); +} +TREE_CHECK(obsolete_chosen_interrupt_controller, NULL, WARN); + +static struct check *check_table[] = { + &duplicate_node_names, &duplicate_property_names, + &node_name_chars, &node_name_format, &property_name_chars, + &name_is_string, &name_properties, + &explicit_phandles, + &phandle_references, &path_references, + + &address_cells_is_cell, &size_cells_is_cell, &interrupt_cells_is_cell, + &device_type_is_string, &model_is_string, &status_is_string, + + &addr_size_cells, ®_format, &ranges_format, + + &avoid_default_addr_size, + &obsolete_chosen_interrupt_controller, +}; + +void process_checks(int force, struct boot_info *bi) +{ + struct node *dt = bi->dt; + int i; + int error = 0; + + for (i = 0; i < ARRAY_SIZE(check_table); i++) { + struct check *c = check_table[i]; + + if (c->level != IGNORE) + error = error || run_check(c, dt); + } + + if (error) { + if (!force) { + fprintf(stderr, "ERROR: Input tree has errors, aborting " + "(use -f to force output)\n"); + exit(2); + } else if (quiet < 3) { + fprintf(stderr, "Warning: Input tree has errors, " + "output forced\n"); + } + } +} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/data.c linux-2.6.30-rc4-git/scripts/dtc/data.c --- linux-2.6.30-rc4/scripts/dtc/data.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/data.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,321 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +void data_free(struct data d) +{ + struct marker *m, *nm; + + m = d.markers; + while (m) { + nm = m->next; + free(m->ref); + free(m); + m = nm; + } + + if (d.val) + free(d.val); +} + +struct data data_grow_for(struct data d, int xlen) +{ + struct data nd; + int newsize; + + if (xlen == 0) + return d; + + nd = d; + + newsize = xlen; + + while ((d.len + xlen) > newsize) + newsize *= 2; + + nd.val = xrealloc(d.val, newsize); + + return nd; +} + +struct data data_copy_mem(const char *mem, int len) +{ + struct data d; + + d = data_grow_for(empty_data, len); + + d.len = len; + memcpy(d.val, mem, len); + + return d; +} + +static char get_oct_char(const char *s, int *i) +{ + char x[4]; + char *endx; + long val; + + x[3] = '\0'; + strncpy(x, s + *i, 3); + + val = strtol(x, &endx, 8); + + assert(endx > x); + + (*i) += endx - x; + return val; +} + +static char get_hex_char(const char *s, int *i) +{ + char x[3]; + char *endx; + long val; + + x[2] = '\0'; + strncpy(x, s + *i, 2); + + val = strtol(x, &endx, 16); + if (!(endx > x)) + die("\\x used with no following hex digits\n"); + + (*i) += endx - x; + return val; +} + +struct data data_copy_escape_string(const char *s, int len) +{ + int i = 0; + struct data d; + char *q; + + d = data_grow_for(empty_data, strlen(s)+1); + + q = d.val; + while (i < len) { + char c = s[i++]; + + if (c != '\\') { + q[d.len++] = c; + continue; + } + + c = s[i++]; + assert(c); + switch (c) { + case 'a': + q[d.len++] = '\a'; + break; + case 'b': + q[d.len++] = '\b'; + break; + case 't': + q[d.len++] = '\t'; + break; + case 'n': + q[d.len++] = '\n'; + break; + case 'v': + q[d.len++] = '\v'; + break; + case 'f': + q[d.len++] = '\f'; + break; + case 'r': + q[d.len++] = '\r'; + break; + case '0': + case '1': + case '2': + case '3': + case '4': + case '5': + case '6': + case '7': + i--; /* need to re-read the first digit as + * part of the octal value */ + q[d.len++] = get_oct_char(s, &i); + break; + case 'x': + q[d.len++] = get_hex_char(s, &i); + break; + default: + q[d.len++] = c; + } + } + + q[d.len++] = '\0'; + return d; +} + +struct data data_copy_file(FILE *f, size_t maxlen) +{ + struct data d = empty_data; + + while (!feof(f) && (d.len < maxlen)) { + size_t chunksize, ret; + + if (maxlen == -1) + chunksize = 4096; + else + chunksize = maxlen - d.len; + + d = data_grow_for(d, chunksize); + ret = fread(d.val + d.len, 1, chunksize, f); + + if (ferror(f)) + die("Error reading file into data: %s", strerror(errno)); + + if (d.len + ret < d.len) + die("Overflow reading file into data\n"); + + d.len += ret; + } + + return d; +} + +struct data data_append_data(struct data d, const void *p, int len) +{ + d = data_grow_for(d, len); + memcpy(d.val + d.len, p, len); + d.len += len; + return d; +} + +struct data data_insert_at_marker(struct data d, struct marker *m, + const void *p, int len) +{ + d = data_grow_for(d, len); + memmove(d.val + m->offset + len, d.val + m->offset, d.len - m->offset); + memcpy(d.val + m->offset, p, len); + d.len += len; + + /* Adjust all markers after the one we're inserting at */ + m = m->next; + for_each_marker(m) + m->offset += len; + return d; +} + +struct data data_append_markers(struct data d, struct marker *m) +{ + struct marker **mp = &d.markers; + + /* Find the end of the markerlist */ + while (*mp) + mp = &((*mp)->next); + *mp = m; + return d; +} + +struct data data_merge(struct data d1, struct data d2) +{ + struct data d; + struct marker *m2 = d2.markers; + + d = data_append_markers(data_append_data(d1, d2.val, d2.len), m2); + + /* Adjust for the length of d1 */ + for_each_marker(m2) + m2->offset += d1.len; + + d2.markers = NULL; /* So data_free() doesn't clobber them */ + data_free(d2); + + return d; +} + +struct data data_append_cell(struct data d, cell_t word) +{ + cell_t beword = cpu_to_fdt32(word); + + return data_append_data(d, &beword, sizeof(beword)); +} + +struct data data_append_re(struct data d, const struct fdt_reserve_entry *re) +{ + struct fdt_reserve_entry bere; + + bere.address = cpu_to_fdt64(re->address); + bere.size = cpu_to_fdt64(re->size); + + return data_append_data(d, &bere, sizeof(bere)); +} + +struct data data_append_addr(struct data d, uint64_t addr) +{ + uint64_t beaddr = cpu_to_fdt64(addr); + + return data_append_data(d, &beaddr, sizeof(beaddr)); +} + +struct data data_append_byte(struct data d, uint8_t byte) +{ + return data_append_data(d, &byte, 1); +} + +struct data data_append_zeroes(struct data d, int len) +{ + d = data_grow_for(d, len); + + memset(d.val + d.len, 0, len); + d.len += len; + return d; +} + +struct data data_append_align(struct data d, int align) +{ + int newlen = ALIGN(d.len, align); + return data_append_zeroes(d, newlen - d.len); +} + +struct data data_add_marker(struct data d, enum markertype type, char *ref) +{ + struct marker *m; + + m = xmalloc(sizeof(*m)); + m->offset = d.len; + m->type = type; + m->ref = ref; + m->next = NULL; + + return data_append_markers(d, m); +} + +int data_is_one_string(struct data d) +{ + int i; + int len = d.len; + + if (len == 0) + return 0; + + for (i = 0; i < len-1; i++) + if (d.val[i] == '\0') + return 0; + + if (d.val[len-1] != '\0') + return 0; + + return 1; +} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/dtc.c linux-2.6.30-rc4-git/scripts/dtc/dtc.c --- linux-2.6.30-rc4/scripts/dtc/dtc.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/dtc.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,226 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" +#include "srcpos.h" + +#include "version_gen.h" + +/* + * Command line options + */ +int quiet; /* Level of quietness */ +int reservenum; /* Number of memory reservation slots */ +int minsize; /* Minimum blob size */ +int padsize; /* Additional padding to blob */ + +char *join_path(const char *path, const char *name) +{ + int lenp = strlen(path); + int lenn = strlen(name); + int len; + int needslash = 1; + char *str; + + len = lenp + lenn + 2; + if ((lenp > 0) && (path[lenp-1] == '/')) { + needslash = 0; + len--; + } + + str = xmalloc(len); + memcpy(str, path, lenp); + if (needslash) { + str[lenp] = '/'; + lenp++; + } + memcpy(str+lenp, name, lenn+1); + return str; +} + +static void fill_fullpaths(struct node *tree, const char *prefix) +{ + struct node *child; + const char *unit; + + tree->fullpath = join_path(prefix, tree->name); + + unit = strchr(tree->name, '@'); + if (unit) + tree->basenamelen = unit - tree->name; + else + tree->basenamelen = strlen(tree->name); + + for_each_child(tree, child) + fill_fullpaths(child, tree->fullpath); +} + +static void __attribute__ ((noreturn)) usage(void) +{ + fprintf(stderr, "Usage:\n"); + fprintf(stderr, "\tdtc [options] \n"); + fprintf(stderr, "\nOptions:\n"); + fprintf(stderr, "\t-h\n"); + fprintf(stderr, "\t\tThis help text\n"); + fprintf(stderr, "\t-q\n"); + fprintf(stderr, "\t\tQuiet: -q suppress warnings, -qq errors, -qqq all\n"); + fprintf(stderr, "\t-I \n"); + fprintf(stderr, "\t\tInput formats are:\n"); + fprintf(stderr, "\t\t\tdts - device tree source text\n"); + fprintf(stderr, "\t\t\tdtb - device tree blob\n"); + fprintf(stderr, "\t\t\tfs - /proc/device-tree style directory\n"); + fprintf(stderr, "\t-o \n"); + fprintf(stderr, "\t-O \n"); + fprintf(stderr, "\t\tOutput formats are:\n"); + fprintf(stderr, "\t\t\tdts - device tree source text\n"); + fprintf(stderr, "\t\t\tdtb - device tree blob\n"); + fprintf(stderr, "\t\t\tasm - assembler source\n"); + fprintf(stderr, "\t-V \n"); + fprintf(stderr, "\t\tBlob version to produce, defaults to %d (relevant for dtb\n\t\tand asm output only)\n", DEFAULT_FDT_VERSION); + fprintf(stderr, "\t-R \n"); + fprintf(stderr, "\t\tMake space for reserve map entries (relevant for \n\t\tdtb and asm output only)\n"); + fprintf(stderr, "\t-S \n"); + fprintf(stderr, "\t\tMake the blob at least long (extra space)\n"); + fprintf(stderr, "\t-p \n"); + fprintf(stderr, "\t\tAdd padding to the blob of long (extra space)\n"); + fprintf(stderr, "\t-b \n"); + fprintf(stderr, "\t\tSet the physical boot cpu\n"); + fprintf(stderr, "\t-f\n"); + fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n"); + fprintf(stderr, "\t-v\n"); + fprintf(stderr, "\t\tPrint DTC version and exit\n"); + exit(3); +} + +int main(int argc, char *argv[]) +{ + struct boot_info *bi; + const char *inform = "dts"; + const char *outform = "dts"; + const char *outname = "-"; + int force = 0, check = 0; + const char *arg; + int opt; + FILE *outf = NULL; + int outversion = DEFAULT_FDT_VERSION; + long long cmdline_boot_cpuid = -1; + + quiet = 0; + reservenum = 0; + minsize = 0; + padsize = 0; + + while ((opt = getopt(argc, argv, "hI:O:o:V:R:S:p:fcqb:v")) != EOF) { + switch (opt) { + case 'I': + inform = optarg; + break; + case 'O': + outform = optarg; + break; + case 'o': + outname = optarg; + break; + case 'V': + outversion = strtol(optarg, NULL, 0); + break; + case 'R': + reservenum = strtol(optarg, NULL, 0); + break; + case 'S': + minsize = strtol(optarg, NULL, 0); + break; + case 'p': + padsize = strtol(optarg, NULL, 0); + break; + case 'f': + force = 1; + break; + case 'c': + check = 1; + break; + case 'q': + quiet++; + break; + case 'b': + cmdline_boot_cpuid = strtoll(optarg, NULL, 0); + break; + case 'v': + printf("Version: %s\n", DTC_VERSION); + exit(0); + case 'h': + default: + usage(); + } + } + + if (argc > (optind+1)) + usage(); + else if (argc < (optind+1)) + arg = "-"; + else + arg = argv[optind]; + + /* minsize and padsize are mutually exclusive */ + if (minsize && padsize) + die("Can't set both -p and -S\n"); + + fprintf(stderr, "DTC: %s->%s on file \"%s\"\n", + inform, outform, arg); + + if (streq(inform, "dts")) + bi = dt_from_source(arg); + else if (streq(inform, "fs")) + bi = dt_from_fs(arg); + else if(streq(inform, "dtb")) + bi = dt_from_blob(arg); + else + die("Unknown input format \"%s\"\n", inform); + + if (cmdline_boot_cpuid != -1) + bi->boot_cpuid_phys = cmdline_boot_cpuid; + + fill_fullpaths(bi->dt, ""); + process_checks(force, bi); + + + if (streq(outname, "-")) { + outf = stdout; + } else { + outf = fopen(outname, "w"); + if (! outf) + die("Couldn't open output file %s: %s\n", + outname, strerror(errno)); + } + + if (streq(outform, "dts")) { + dt_to_source(outf, bi); + } else if (streq(outform, "dtb")) { + dt_to_blob(outf, bi, outversion); + } else if (streq(outform, "asm")) { + dt_to_asm(outf, bi, outversion); + } else if (streq(outform, "null")) { + /* do nothing */ + } else { + die("Unknown output format \"%s\"\n", outform); + } + + exit(0); +} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/dtc.h linux-2.6.30-rc4-git/scripts/dtc/dtc.h --- linux-2.6.30-rc4/scripts/dtc/dtc.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/dtc.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,246 @@ +#ifndef _DTC_H +#define _DTC_H + +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DEFAULT_FDT_VERSION 17 +/* + * Command line options + */ +extern int quiet; /* Level of quietness */ +extern int reservenum; /* Number of memory reservation slots */ +extern int minsize; /* Minimum blob size */ +extern int padsize; /* Additional padding to blob */ + +static inline void __attribute__((noreturn)) die(char * str, ...) +{ + va_list ap; + + va_start(ap, str); + fprintf(stderr, "FATAL ERROR: "); + vfprintf(stderr, str, ap); + exit(1); +} + +static inline void *xmalloc(size_t len) +{ + void *new = malloc(len); + + if (! new) + die("malloc() failed\n"); + + return new; +} + +static inline void *xrealloc(void *p, size_t len) +{ + void *new = realloc(p, len); + + if (! new) + die("realloc() failed (len=%d)\n", len); + + return new; +} + +typedef uint32_t cell_t; + + +#define streq(a, b) (strcmp((a), (b)) == 0) +#define strneq(a, b, n) (strncmp((a), (b), (n)) == 0) + +#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + +/* Data blobs */ +enum markertype { + REF_PHANDLE, + REF_PATH, + LABEL, +}; + +struct marker { + enum markertype type; + int offset; + char *ref; + struct marker *next; +}; + +struct data { + int len; + char *val; + struct marker *markers; +}; + + +#define empty_data ((struct data){ /* all .members = 0 or NULL */ }) + +#define for_each_marker(m) \ + for (; (m); (m) = (m)->next) +#define for_each_marker_of_type(m, t) \ + for_each_marker(m) \ + if ((m)->type == (t)) + +void data_free(struct data d); + +struct data data_grow_for(struct data d, int xlen); + +struct data data_copy_mem(const char *mem, int len); +struct data data_copy_escape_string(const char *s, int len); +struct data data_copy_file(FILE *f, size_t len); + +struct data data_append_data(struct data d, const void *p, int len); +struct data data_insert_at_marker(struct data d, struct marker *m, + const void *p, int len); +struct data data_merge(struct data d1, struct data d2); +struct data data_append_cell(struct data d, cell_t word); +struct data data_append_re(struct data d, const struct fdt_reserve_entry *re); +struct data data_append_addr(struct data d, uint64_t addr); +struct data data_append_byte(struct data d, uint8_t byte); +struct data data_append_zeroes(struct data d, int len); +struct data data_append_align(struct data d, int align); + +struct data data_add_marker(struct data d, enum markertype type, char *ref); + +int data_is_one_string(struct data d); + +/* DT constraints */ + +#define MAX_PROPNAME_LEN 31 +#define MAX_NODENAME_LEN 31 + +/* Live trees */ +struct property { + char *name; + struct data val; + + struct property *next; + + char *label; +}; + +struct node { + char *name; + struct property *proplist; + struct node *children; + + struct node *parent; + struct node *next_sibling; + + char *fullpath; + int basenamelen; + + cell_t phandle; + int addr_cells, size_cells; + + char *label; +}; + +#define for_each_property(n, p) \ + for ((p) = (n)->proplist; (p); (p) = (p)->next) + +#define for_each_child(n, c) \ + for ((c) = (n)->children; (c); (c) = (c)->next_sibling) + +struct property *build_property(char *name, struct data val, char *label); +struct property *chain_property(struct property *first, struct property *list); +struct property *reverse_properties(struct property *first); + +struct node *build_node(struct property *proplist, struct node *children); +struct node *name_node(struct node *node, char *name, char *label); +struct node *chain_node(struct node *first, struct node *list); + +void add_property(struct node *node, struct property *prop); +void add_child(struct node *parent, struct node *child); + +const char *get_unitname(struct node *node); +struct property *get_property(struct node *node, const char *propname); +cell_t propval_cell(struct property *prop); +struct node *get_subnode(struct node *node, const char *nodename); +struct node *get_node_by_path(struct node *tree, const char *path); +struct node *get_node_by_label(struct node *tree, const char *label); +struct node *get_node_by_phandle(struct node *tree, cell_t phandle); +struct node *get_node_by_ref(struct node *tree, const char *ref); +cell_t get_node_phandle(struct node *root, struct node *node); + +/* Boot info (tree plus memreserve information */ + +struct reserve_info { + struct fdt_reserve_entry re; + + struct reserve_info *next; + + char *label; +}; + +struct reserve_info *build_reserve_entry(uint64_t start, uint64_t len, char *label); +struct reserve_info *chain_reserve_entry(struct reserve_info *first, + struct reserve_info *list); +struct reserve_info *add_reserve_entry(struct reserve_info *list, + struct reserve_info *new); + + +struct boot_info { + struct reserve_info *reservelist; + struct node *dt; /* the device tree */ + uint32_t boot_cpuid_phys; +}; + +struct boot_info *build_boot_info(struct reserve_info *reservelist, + struct node *tree, uint32_t boot_cpuid_phys); + +/* Checks */ + +void process_checks(int force, struct boot_info *bi); + +/* Flattened trees */ + +void dt_to_blob(FILE *f, struct boot_info *bi, int version); +void dt_to_asm(FILE *f, struct boot_info *bi, int version); + +struct boot_info *dt_from_blob(const char *fname); + +/* Tree source */ + +void dt_to_source(FILE *f, struct boot_info *bi); +struct boot_info *dt_from_source(const char *f); + +/* FS trees */ + +struct boot_info *dt_from_fs(const char *dirname); + +/* misc */ + +char *join_path(const char *path, const char *name); + +#endif /* _DTC_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/dtc-lexer.l linux-2.6.30-rc4-git/scripts/dtc/dtc-lexer.l --- linux-2.6.30-rc4/scripts/dtc/dtc-lexer.l 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/dtc-lexer.l 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,320 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +%option noyywrap nounput yylineno + +%x INCLUDE +%x BYTESTRING +%x PROPNODENAME +%s V1 + +PROPNODECHAR [a-zA-Z0-9,._+*#?@-] +PATHCHAR ({PROPNODECHAR}|[/]) +LABEL [a-zA-Z_][a-zA-Z0-9_]* +STRING \"([^\\"]|\\.)*\" +WS [[:space:]] +COMMENT "/*"([^*]|\*+[^*/])*\*+"/" +LINECOMMENT "//".*\n + +%{ +#include "dtc.h" +#include "srcpos.h" +#include "dtc-parser.tab.h" + + +/*#define LEXDEBUG 1*/ + +#ifdef LEXDEBUG +#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) +#else +#define DPRINT(fmt, ...) do { } while (0) +#endif + +static int dts_version; /* = 0 */ + +#define BEGIN_DEFAULT() if (dts_version == 0) { \ + DPRINT("\n"); \ + BEGIN(INITIAL); \ + } else { \ + DPRINT("\n"); \ + BEGIN(V1); \ + } + +static void push_input_file(const char *filename); +static int pop_input_file(void); +%} + +%% +<*>"/include/"{WS}*{STRING} { + char *name = strchr(yytext, '\"') + 1; + yytext[yyleng-1] = '\0'; + push_input_file(name); + } + +<*><> { + if (!pop_input_file()) { + yyterminate(); + } + } + +<*>{STRING} { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("String: %s\n", yytext); + yylval.data = data_copy_escape_string(yytext+1, + yyleng-2); + yylloc.first_line = yylineno; + return DT_STRING; + } + +<*>"/dts-v1/" { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Keyword: /dts-v1/\n"); + dts_version = 1; + BEGIN_DEFAULT(); + return DT_V1; + } + +<*>"/memreserve/" { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Keyword: /memreserve/\n"); + BEGIN_DEFAULT(); + return DT_MEMRESERVE; + } + +<*>{LABEL}: { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Label: %s\n", yytext); + yylval.labelref = strdup(yytext); + yylval.labelref[yyleng-1] = '\0'; + return DT_LABEL; + } + +[bodh]# { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + if (*yytext == 'b') + yylval.cbase = 2; + else if (*yytext == 'o') + yylval.cbase = 8; + else if (*yytext == 'd') + yylval.cbase = 10; + else + yylval.cbase = 16; + DPRINT("Base: %d\n", yylval.cbase); + return DT_BASE; + } + +[0-9a-fA-F]+ { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LEGACYLITERAL; + } + +[0-9]+|0[xX][0-9a-fA-F]+ { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LITERAL; + } + +\&{LABEL} { /* label reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + +"&{/"{PATHCHAR}+\} { /* new-style path reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yytext[yyleng-1] = '\0'; + DPRINT("Ref: %s\n", yytext+2); + yylval.labelref = strdup(yytext+2); + return DT_REF; + } + +"&/"{PATHCHAR}+ { /* old-style path reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + +[0-9a-fA-F]{2} { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.byte = strtol(yytext, NULL, 16); + DPRINT("Byte: %02x\n", (int)yylval.byte); + return DT_BYTE; + } + +"]" { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("/BYTESTRING\n"); + BEGIN_DEFAULT(); + return ']'; + } + +{PROPNODECHAR}+ { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("PropNodeName: %s\n", yytext); + yylval.propnodename = strdup(yytext); + BEGIN_DEFAULT(); + return DT_PROPNODENAME; + } + +"/incbin/" { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Binary Include\n"); + return DT_INCBIN; + } + +<*>{WS}+ /* eat whitespace */ +<*>{COMMENT}+ /* eat C-style comments */ +<*>{LINECOMMENT}+ /* eat C++-style comments */ + +<*>. { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Char: %c (\\x%02x)\n", yytext[0], + (unsigned)yytext[0]); + if (yytext[0] == '[') { + DPRINT("\n"); + BEGIN(BYTESTRING); + } + if ((yytext[0] == '{') + || (yytext[0] == ';')) { + DPRINT("\n"); + BEGIN(PROPNODENAME); + } + return yytext[0]; + } + +%% + + +/* + * Stack of nested include file contexts. + */ + +struct incl_file { + struct dtc_file *file; + YY_BUFFER_STATE yy_prev_buf; + int yy_prev_lineno; + struct incl_file *prev; +}; + +static struct incl_file *incl_file_stack; + + +/* + * Detect infinite include recursion. + */ +#define MAX_INCLUDE_DEPTH (100) + +static int incl_depth = 0; + + +static void push_input_file(const char *filename) +{ + struct incl_file *incl_file; + struct dtc_file *newfile; + struct search_path search, *searchptr = NULL; + + assert(filename); + + if (incl_depth++ >= MAX_INCLUDE_DEPTH) + die("Includes nested too deeply"); + + if (srcpos_file) { + search.dir = srcpos_file->dir; + search.next = NULL; + search.prev = NULL; + searchptr = &search; + } + + newfile = dtc_open_file(filename, searchptr); + + incl_file = xmalloc(sizeof(struct incl_file)); + + /* + * Save current context. + */ + incl_file->yy_prev_buf = YY_CURRENT_BUFFER; + incl_file->yy_prev_lineno = yylineno; + incl_file->file = srcpos_file; + incl_file->prev = incl_file_stack; + + incl_file_stack = incl_file; + + /* + * Establish new context. + */ + srcpos_file = newfile; + yylineno = 1; + yyin = newfile->file; + yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE)); +} + + +static int pop_input_file(void) +{ + struct incl_file *incl_file; + + if (incl_file_stack == 0) + return 0; + + dtc_close_file(srcpos_file); + + /* + * Pop. + */ + --incl_depth; + incl_file = incl_file_stack; + incl_file_stack = incl_file->prev; + + /* + * Recover old context. + */ + yy_delete_buffer(YY_CURRENT_BUFFER); + yy_switch_to_buffer(incl_file->yy_prev_buf); + yylineno = incl_file->yy_prev_lineno; + srcpos_file = incl_file->file; + yyin = incl_file->file ? incl_file->file->file : NULL; + + /* + * Free old state. + */ + free(incl_file); + + return 1; +} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/dtc-lexer.lex.c_shipped linux-2.6.30-rc4-git/scripts/dtc/dtc-lexer.lex.c_shipped --- linux-2.6.30-rc4/scripts/dtc/dtc-lexer.lex.c_shipped 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/dtc-lexer.lex.c_shipped 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,2187 @@ +#line 2 "dtc-lexer.lex.c" + +#line 4 "dtc-lexer.lex.c" + +#define YY_INT_ALIGNED short int + +/* A lexical scanner generated by flex */ + +#define FLEX_SCANNER +#define YY_FLEX_MAJOR_VERSION 2 +#define YY_FLEX_MINOR_VERSION 5 +#define YY_FLEX_SUBMINOR_VERSION 34 +#if YY_FLEX_SUBMINOR_VERSION > 0 +#define FLEX_BETA +#endif + +/* First, we deal with platform-specific or compiler-specific issues. */ + +/* begin standard C headers. */ +#include +#include +#include +#include + +/* end standard C headers. */ + +/* flex integer type definitions */ + +#ifndef FLEXINT_H +#define FLEXINT_H + +/* C99 systems have . Non-C99 systems may or may not. */ + +#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L + +/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, + * if you want the limit (max/min) macros for int types. + */ +#ifndef __STDC_LIMIT_MACROS +#define __STDC_LIMIT_MACROS 1 +#endif + +#include +typedef int8_t flex_int8_t; +typedef uint8_t flex_uint8_t; +typedef int16_t flex_int16_t; +typedef uint16_t flex_uint16_t; +typedef int32_t flex_int32_t; +typedef uint32_t flex_uint32_t; +#else +typedef signed char flex_int8_t; +typedef short int flex_int16_t; +typedef int flex_int32_t; +typedef unsigned char flex_uint8_t; +typedef unsigned short int flex_uint16_t; +typedef unsigned int flex_uint32_t; +#endif /* ! C99 */ + +/* Limits of integral types. */ +#ifndef INT8_MIN +#define INT8_MIN (-128) +#endif +#ifndef INT16_MIN +#define INT16_MIN (-32767-1) +#endif +#ifndef INT32_MIN +#define INT32_MIN (-2147483647-1) +#endif +#ifndef INT8_MAX +#define INT8_MAX (127) +#endif +#ifndef INT16_MAX +#define INT16_MAX (32767) +#endif +#ifndef INT32_MAX +#define INT32_MAX (2147483647) +#endif +#ifndef UINT8_MAX +#define UINT8_MAX (255U) +#endif +#ifndef UINT16_MAX +#define UINT16_MAX (65535U) +#endif +#ifndef UINT32_MAX +#define UINT32_MAX (4294967295U) +#endif + +#endif /* ! FLEXINT_H */ + +#ifdef __cplusplus + +/* The "const" storage-class-modifier is valid. */ +#define YY_USE_CONST + +#else /* ! __cplusplus */ + +/* C99 requires __STDC__ to be defined as 1. */ +#if defined (__STDC__) + +#define YY_USE_CONST + +#endif /* defined (__STDC__) */ +#endif /* ! __cplusplus */ + +#ifdef YY_USE_CONST +#define yyconst const +#else +#define yyconst +#endif + +/* Returned upon end-of-file. */ +#define YY_NULL 0 + +/* Promotes a possibly negative, possibly signed char to an unsigned + * integer for use as an array index. If the signed char is negative, + * we want to instead treat it as an 8-bit unsigned char, hence the + * double cast. + */ +#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) + +/* Enter a start condition. This macro really ought to take a parameter, + * but we do it the disgusting crufty way forced on us by the ()-less + * definition of BEGIN. + */ +#define BEGIN (yy_start) = 1 + 2 * + +/* Translate the current start state into a value that can be later handed + * to BEGIN to return to the state. The YYSTATE alias is for lex + * compatibility. + */ +#define YY_START (((yy_start) - 1) / 2) +#define YYSTATE YY_START + +/* Action number for EOF rule of a given start state. */ +#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) + +/* Special action meaning "start processing a new file". */ +#define YY_NEW_FILE yyrestart(yyin ) + +#define YY_END_OF_BUFFER_CHAR 0 + +/* Size of default input buffer. */ +#ifndef YY_BUF_SIZE +#define YY_BUF_SIZE 16384 +#endif + +/* The state buf must be large enough to hold one state per character in the main buffer. + */ +#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) + +#ifndef YY_TYPEDEF_YY_BUFFER_STATE +#define YY_TYPEDEF_YY_BUFFER_STATE +typedef struct yy_buffer_state *YY_BUFFER_STATE; +#endif + +extern int yyleng; + +extern FILE *yyin, *yyout; + +#define EOB_ACT_CONTINUE_SCAN 0 +#define EOB_ACT_END_OF_FILE 1 +#define EOB_ACT_LAST_MATCH 2 + + /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires + * access to the local variable yy_act. Since yyless() is a macro, it would break + * existing scanners that call yyless() from OUTSIDE yylex. + * One obvious solution it to make yy_act a global. I tried that, and saw + * a 5% performance hit in a non-yylineno scanner, because yy_act is + * normally declared as a register variable-- so it is not worth it. + */ + #define YY_LESS_LINENO(n) \ + do { \ + int yyl;\ + for ( yyl = n; yyl < yyleng; ++yyl )\ + if ( yytext[yyl] == '\n' )\ + --yylineno;\ + }while(0) + +/* Return all but the first "n" matched characters back to the input stream. */ +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + *yy_cp = (yy_hold_char); \ + YY_RESTORE_YY_MORE_OFFSET \ + (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ + YY_DO_BEFORE_ACTION; /* set up yytext again */ \ + } \ + while ( 0 ) + +#define unput(c) yyunput( c, (yytext_ptr) ) + +/* The following is because we cannot portably get our hands on size_t + * (without autoconf's help, which isn't available because we want + * flex-generated scanners to compile on their own). + * Given that the standard has decreed that size_t exists since 1989, + * I guess we can afford to depend on it. Manoj. + */ + +#ifndef YY_TYPEDEF_YY_SIZE_T +#define YY_TYPEDEF_YY_SIZE_T +typedef size_t yy_size_t; +#endif + +#ifndef YY_STRUCT_YY_BUFFER_STATE +#define YY_STRUCT_YY_BUFFER_STATE +struct yy_buffer_state + { + FILE *yy_input_file; + + char *yy_ch_buf; /* input buffer */ + char *yy_buf_pos; /* current position in input buffer */ + + /* Size of input buffer in bytes, not including room for EOB + * characters. + */ + yy_size_t yy_buf_size; + + /* Number of characters read into yy_ch_buf, not including EOB + * characters. + */ + int yy_n_chars; + + /* Whether we "own" the buffer - i.e., we know we created it, + * and can realloc() it to grow it, and should free() it to + * delete it. + */ + int yy_is_our_buffer; + + /* Whether this is an "interactive" input source; if so, and + * if we're using stdio for input, then we want to use getc() + * instead of fread(), to make sure we stop fetching input after + * each newline. + */ + int yy_is_interactive; + + /* Whether we're considered to be at the beginning of a line. + * If so, '^' rules will be active on the next match, otherwise + * not. + */ + int yy_at_bol; + + int yy_bs_lineno; /**< The line count. */ + int yy_bs_column; /**< The column count. */ + + /* Whether to try to fill the input buffer when we reach the + * end of it. + */ + int yy_fill_buffer; + + int yy_buffer_status; + +#define YY_BUFFER_NEW 0 +#define YY_BUFFER_NORMAL 1 + /* When an EOF's been seen but there's still some text to process + * then we mark the buffer as YY_EOF_PENDING, to indicate that we + * shouldn't try reading from the input source any more. We might + * still have a bunch of tokens to match, though, because of + * possible backing-up. + * + * When we actually see the EOF, we change the status to "new" + * (via yyrestart()), so that the user can continue scanning by + * just pointing yyin at a new input file. + */ +#define YY_BUFFER_EOF_PENDING 2 + + }; +#endif /* !YY_STRUCT_YY_BUFFER_STATE */ + +/* Stack of input buffers. */ +static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ +static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ +static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ + +/* We provide macros for accessing buffer states in case in the + * future we want to put the buffer states in a more general + * "scanner state". + * + * Returns the top of the stack, or NULL. + */ +#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ + ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ + : NULL) + +/* Same as previous macro, but useful when we know that the buffer stack is not + * NULL or when we need an lvalue. For internal use only. + */ +#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] + +/* yy_hold_char holds the character lost when yytext is formed. */ +static char yy_hold_char; +static int yy_n_chars; /* number of characters read into yy_ch_buf */ +int yyleng; + +/* Points to current character in buffer. */ +static char *yy_c_buf_p = (char *) 0; +static int yy_init = 0; /* whether we need to initialize */ +static int yy_start = 0; /* start state number */ + +/* Flag which is used to allow yywrap()'s to do buffer switches + * instead of setting up a fresh yyin. A bit of a hack ... + */ +static int yy_did_buffer_switch_on_eof; + +void yyrestart (FILE *input_file ); +void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); +YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); +void yy_delete_buffer (YY_BUFFER_STATE b ); +void yy_flush_buffer (YY_BUFFER_STATE b ); +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); +void yypop_buffer_state (void ); + +static void yyensure_buffer_stack (void ); +static void yy_load_buffer_state (void ); +static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); + +#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) + +YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); +YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); +YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); + +void *yyalloc (yy_size_t ); +void *yyrealloc (void *,yy_size_t ); +void yyfree (void * ); + +#define yy_new_buffer yy_create_buffer + +#define yy_set_interactive(is_interactive) \ + { \ + if ( ! YY_CURRENT_BUFFER ){ \ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ + } + +#define yy_set_bol(at_bol) \ + { \ + if ( ! YY_CURRENT_BUFFER ){\ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ + } + +#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) + +/* Begin user sect3 */ + +#define yywrap(n) 1 +#define YY_SKIP_YYWRAP + +typedef unsigned char YY_CHAR; + +FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; + +typedef int yy_state_type; + +extern int yylineno; + +int yylineno = 1; + +extern char *yytext; +#define yytext_ptr yytext + +static yy_state_type yy_get_previous_state (void ); +static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); +static int yy_get_next_buffer (void ); +static void yy_fatal_error (yyconst char msg[] ); + +/* Done after the current pattern has been matched and before the + * corresponding action - sets up yytext. + */ +#define YY_DO_BEFORE_ACTION \ + (yytext_ptr) = yy_bp; \ + yyleng = (size_t) (yy_cp - yy_bp); \ + (yy_hold_char) = *yy_cp; \ + *yy_cp = '\0'; \ + (yy_c_buf_p) = yy_cp; + +#define YY_NUM_RULES 20 +#define YY_END_OF_BUFFER 21 +/* This struct is not used in this scanner, + but its presence is necessary. */ +struct yy_trans_info + { + flex_int32_t yy_verify; + flex_int32_t yy_nxt; + }; +static yyconst flex_int16_t yy_accept[104] = + { 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 21, 19, 16, 16, 19, 19, 19, 7, 7, 19, + 7, 19, 19, 19, 19, 13, 14, 14, 19, 8, + 8, 16, 0, 2, 0, 0, 9, 0, 0, 0, + 0, 0, 0, 7, 7, 5, 0, 6, 0, 12, + 12, 14, 14, 8, 0, 11, 9, 0, 0, 0, + 0, 18, 0, 0, 0, 0, 8, 0, 17, 0, + 0, 0, 0, 0, 10, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 3, 15, + 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, + + 0, 4, 0 + } ; + +static yyconst flex_int32_t yy_ec[256] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, + 2, 2, 2, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 2, 1, 4, 5, 1, 1, 6, 1, 1, + 1, 7, 8, 8, 9, 8, 10, 11, 12, 13, + 13, 13, 13, 13, 13, 13, 13, 14, 1, 1, + 1, 1, 8, 8, 15, 15, 15, 15, 15, 15, + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, + 16, 16, 16, 16, 16, 16, 16, 17, 16, 16, + 1, 18, 19, 1, 16, 1, 15, 20, 21, 22, + + 23, 15, 16, 24, 25, 16, 16, 26, 27, 28, + 24, 16, 16, 29, 30, 31, 32, 33, 16, 17, + 16, 16, 34, 1, 35, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1 + } ; + +static yyconst flex_int32_t yy_meta[36] = + { 0, + 1, 1, 1, 1, 2, 1, 2, 2, 2, 3, + 4, 4, 4, 5, 6, 7, 7, 1, 1, 6, + 6, 6, 6, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 8, 1 + } ; + +static yyconst flex_int16_t yy_base[117] = + { 0, + 0, 0, 30, 0, 44, 0, 67, 0, 97, 105, + 302, 303, 35, 44, 40, 94, 112, 0, 129, 152, + 296, 295, 159, 0, 176, 303, 0, 116, 95, 165, + 49, 46, 102, 303, 296, 0, 0, 288, 290, 293, + 264, 266, 270, 0, 0, 303, 0, 303, 264, 303, + 0, 0, 195, 101, 0, 0, 0, 0, 284, 125, + 277, 265, 225, 230, 216, 218, 0, 202, 224, 221, + 217, 107, 196, 188, 303, 206, 179, 186, 178, 185, + 183, 162, 161, 150, 169, 160, 145, 125, 303, 303, + 137, 109, 190, 103, 203, 167, 108, 197, 303, 123, + + 29, 303, 303, 215, 221, 226, 229, 234, 240, 246, + 250, 257, 265, 270, 275, 282 + } ; + +static yyconst flex_int16_t yy_def[117] = + { 0, + 103, 1, 1, 3, 3, 5, 103, 7, 3, 3, + 103, 103, 103, 103, 104, 105, 103, 106, 103, 19, + 19, 20, 103, 107, 20, 103, 108, 109, 105, 103, + 103, 103, 104, 103, 104, 110, 111, 103, 112, 113, + 103, 103, 103, 106, 19, 103, 20, 103, 103, 103, + 20, 108, 109, 103, 114, 110, 111, 115, 112, 112, + 113, 103, 103, 103, 103, 103, 114, 115, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 116, 103, 116, 103, 116, + + 103, 103, 0, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103 + } ; + +static yyconst flex_int16_t yy_nxt[339] = + { 0, + 12, 13, 14, 15, 12, 16, 12, 12, 12, 17, + 18, 18, 18, 12, 19, 20, 20, 12, 12, 21, + 19, 21, 19, 22, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 12, 12, 12, 32, 32, 102, 23, + 12, 12, 12, 34, 20, 32, 32, 32, 32, 20, + 20, 20, 20, 20, 24, 24, 24, 35, 25, 54, + 54, 54, 26, 25, 25, 25, 25, 12, 13, 14, + 15, 27, 12, 27, 27, 27, 23, 27, 27, 27, + 12, 28, 28, 28, 12, 12, 28, 28, 28, 28, + 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, + + 12, 12, 29, 36, 103, 34, 17, 30, 31, 31, + 29, 54, 54, 54, 17, 30, 31, 31, 39, 35, + 52, 40, 52, 52, 52, 103, 78, 38, 38, 46, + 101, 60, 79, 41, 69, 97, 42, 94, 43, 45, + 45, 45, 46, 45, 47, 47, 93, 92, 45, 45, + 45, 45, 47, 47, 47, 47, 47, 47, 47, 47, + 47, 47, 47, 47, 47, 39, 47, 91, 40, 90, + 99, 47, 47, 47, 47, 54, 54, 54, 89, 88, + 41, 55, 87, 49, 100, 43, 51, 51, 51, 86, + 51, 95, 95, 96, 85, 51, 51, 51, 51, 52, + + 99, 52, 52, 52, 95, 95, 96, 84, 46, 83, + 82, 81, 39, 79, 100, 33, 33, 33, 33, 33, + 33, 33, 33, 37, 80, 77, 37, 37, 37, 44, + 40, 44, 50, 76, 50, 52, 75, 52, 74, 52, + 52, 53, 73, 53, 53, 53, 53, 56, 56, 56, + 72, 56, 56, 57, 71, 57, 57, 59, 59, 59, + 59, 59, 59, 59, 59, 61, 61, 61, 61, 61, + 61, 61, 61, 67, 70, 67, 68, 68, 68, 62, + 68, 68, 98, 98, 98, 98, 98, 98, 98, 98, + 60, 66, 65, 64, 63, 62, 60, 58, 103, 48, + + 48, 103, 11, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103 + } ; + +static yyconst flex_int16_t yy_chk[339] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 3, 13, 13, 101, 3, + 3, 3, 3, 15, 3, 14, 14, 32, 32, 3, + 3, 3, 3, 3, 5, 5, 5, 15, 5, 31, + 31, 31, 5, 5, 5, 5, 5, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + + 7, 7, 9, 16, 29, 33, 9, 9, 9, 9, + 10, 54, 54, 54, 10, 10, 10, 10, 17, 33, + 28, 17, 28, 28, 28, 100, 72, 16, 29, 28, + 97, 60, 72, 17, 60, 94, 17, 92, 17, 19, + 19, 19, 19, 19, 19, 19, 91, 88, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 20, 20, 20, 23, 20, 87, 23, 86, + 96, 20, 20, 20, 20, 30, 30, 30, 85, 84, + 23, 30, 83, 23, 96, 23, 25, 25, 25, 82, + 25, 93, 93, 93, 81, 25, 25, 25, 25, 53, + + 98, 53, 53, 53, 95, 95, 95, 80, 53, 79, + 78, 77, 76, 74, 98, 104, 104, 104, 104, 104, + 104, 104, 104, 105, 73, 71, 105, 105, 105, 106, + 70, 106, 107, 69, 107, 108, 68, 108, 66, 108, + 108, 109, 65, 109, 109, 109, 109, 110, 110, 110, + 64, 110, 110, 111, 63, 111, 111, 112, 112, 112, + 112, 112, 112, 112, 112, 113, 113, 113, 113, 113, + 113, 113, 113, 114, 62, 114, 115, 115, 115, 61, + 115, 115, 116, 116, 116, 116, 116, 116, 116, 116, + 59, 49, 43, 42, 41, 40, 39, 38, 35, 22, + + 21, 11, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103 + } ; + +/* Table of booleans, true if rule could match eol. */ +static yyconst flex_int32_t yy_rule_can_match_eol[21] = + { 0, +1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, + 0, }; + +static yy_state_type yy_last_accepting_state; +static char *yy_last_accepting_cpos; + +extern int yy_flex_debug; +int yy_flex_debug = 0; + +/* The intent behind this definition is that it'll catch + * any uses of REJECT which flex missed. + */ +#define REJECT reject_used_but_not_detected +#define yymore() yymore_used_but_not_detected +#define YY_MORE_ADJ 0 +#define YY_RESTORE_YY_MORE_OFFSET +char *yytext; +#line 1 "dtc-lexer.l" +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + + + + +#line 37 "dtc-lexer.l" +#include "dtc.h" +#include "srcpos.h" +#include "dtc-parser.tab.h" + + +/*#define LEXDEBUG 1*/ + +#ifdef LEXDEBUG +#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) +#else +#define DPRINT(fmt, ...) do { } while (0) +#endif + +static int dts_version; /* = 0 */ + +#define BEGIN_DEFAULT() if (dts_version == 0) { \ + DPRINT("\n"); \ + BEGIN(INITIAL); \ + } else { \ + DPRINT("\n"); \ + BEGIN(V1); \ + } + +static void push_input_file(const char *filename); +static int pop_input_file(void); +#line 638 "dtc-lexer.lex.c" + +#define INITIAL 0 +#define INCLUDE 1 +#define BYTESTRING 2 +#define PROPNODENAME 3 +#define V1 4 + +#ifndef YY_NO_UNISTD_H +/* Special case for "unistd.h", since it is non-ANSI. We include it way + * down here because we want the user's section 1 to have been scanned first. + * The user has a chance to override it with an option. + */ +#include +#endif + +#ifndef YY_EXTRA_TYPE +#define YY_EXTRA_TYPE void * +#endif + +static int yy_init_globals (void ); + +/* Macros after this point can all be overridden by user definitions in + * section 1. + */ + +#ifndef YY_SKIP_YYWRAP +#ifdef __cplusplus +extern "C" int yywrap (void ); +#else +extern int yywrap (void ); +#endif +#endif + +#ifndef yytext_ptr +static void yy_flex_strncpy (char *,yyconst char *,int ); +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * ); +#endif + +#ifndef YY_NO_INPUT + +#ifdef __cplusplus +static int yyinput (void ); +#else +static int input (void ); +#endif + +#endif + +/* Amount of stuff to slurp up with each read. */ +#ifndef YY_READ_BUF_SIZE +#define YY_READ_BUF_SIZE 8192 +#endif + +/* Copy whatever the last rule matched to the standard output. */ +#ifndef ECHO +/* This used to be an fputs(), but since the string might contain NUL's, + * we now use fwrite(). + */ +#define ECHO fwrite( yytext, yyleng, 1, yyout ) +#endif + +/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, + * is returned in "result". + */ +#ifndef YY_INPUT +#define YY_INPUT(buf,result,max_size) \ + if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ + { \ + int c = '*'; \ + int n; \ + for ( n = 0; n < max_size && \ + (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ + buf[n] = (char) c; \ + if ( c == '\n' ) \ + buf[n++] = (char) c; \ + if ( c == EOF && ferror( yyin ) ) \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + result = n; \ + } \ + else \ + { \ + errno=0; \ + while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ + { \ + if( errno != EINTR) \ + { \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + break; \ + } \ + errno=0; \ + clearerr(yyin); \ + } \ + }\ +\ + +#endif + +/* No semi-colon after return; correct usage is to write "yyterminate();" - + * we don't want an extra ';' after the "return" because that will cause + * some compilers to complain about unreachable statements. + */ +#ifndef yyterminate +#define yyterminate() return YY_NULL +#endif + +/* Number of entries by which start-condition stack grows. */ +#ifndef YY_START_STACK_INCR +#define YY_START_STACK_INCR 25 +#endif + +/* Report a fatal error. */ +#ifndef YY_FATAL_ERROR +#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) +#endif + +/* end tables serialization structures and prototypes */ + +/* Default declaration of generated scanner - a define so the user can + * easily add parameters. + */ +#ifndef YY_DECL +#define YY_DECL_IS_OURS 1 + +extern int yylex (void); + +#define YY_DECL int yylex (void) +#endif /* !YY_DECL */ + +/* Code executed at the beginning of each rule, after yytext and yyleng + * have been set up. + */ +#ifndef YY_USER_ACTION +#define YY_USER_ACTION +#endif + +/* Code executed at the end of each rule. */ +#ifndef YY_BREAK +#define YY_BREAK break; +#endif + +#define YY_RULE_SETUP \ + YY_USER_ACTION + +/** The main scanner function which does all the work. + */ +YY_DECL +{ + register yy_state_type yy_current_state; + register char *yy_cp, *yy_bp; + register int yy_act; + +#line 64 "dtc-lexer.l" + +#line 795 "dtc-lexer.lex.c" + + if ( !(yy_init) ) + { + (yy_init) = 1; + +#ifdef YY_USER_INIT + YY_USER_INIT; +#endif + + if ( ! (yy_start) ) + (yy_start) = 1; /* first start state */ + + if ( ! yyin ) + yyin = stdin; + + if ( ! yyout ) + yyout = stdout; + + if ( ! YY_CURRENT_BUFFER ) { + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_load_buffer_state( ); + } + + while ( 1 ) /* loops until end-of-file is reached */ + { + yy_cp = (yy_c_buf_p); + + /* Support of yytext. */ + *yy_cp = (yy_hold_char); + + /* yy_bp points to the position in yy_ch_buf of the start of + * the current run. + */ + yy_bp = yy_cp; + + yy_current_state = (yy_start); +yy_match: + do + { + register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 104 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + ++yy_cp; + } + while ( yy_base[yy_current_state] != 303 ); + +yy_find_action: + yy_act = yy_accept[yy_current_state]; + if ( yy_act == 0 ) + { /* have to back up */ + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + yy_act = yy_accept[yy_current_state]; + } + + YY_DO_BEFORE_ACTION; + + if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] ) + { + int yyl; + for ( yyl = 0; yyl < yyleng; ++yyl ) + if ( yytext[yyl] == '\n' ) + + yylineno++; +; + } + +do_action: /* This label is used only to access EOF actions. */ + + switch ( yy_act ) + { /* beginning of action switch */ + case 0: /* must back up */ + /* undo the effects of YY_DO_BEFORE_ACTION */ + *yy_cp = (yy_hold_char); + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + goto yy_find_action; + +case 1: +/* rule 1 can match eol */ +YY_RULE_SETUP +#line 65 "dtc-lexer.l" +{ + char *name = strchr(yytext, '\"') + 1; + yytext[yyleng-1] = '\0'; + push_input_file(name); + } + YY_BREAK +case YY_STATE_EOF(INITIAL): +case YY_STATE_EOF(INCLUDE): +case YY_STATE_EOF(BYTESTRING): +case YY_STATE_EOF(PROPNODENAME): +case YY_STATE_EOF(V1): +#line 71 "dtc-lexer.l" +{ + if (!pop_input_file()) { + yyterminate(); + } + } + YY_BREAK +case 2: +/* rule 2 can match eol */ +YY_RULE_SETUP +#line 77 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("String: %s\n", yytext); + yylval.data = data_copy_escape_string(yytext+1, + yyleng-2); + yylloc.first_line = yylineno; + return DT_STRING; + } + YY_BREAK +case 3: +YY_RULE_SETUP +#line 87 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Keyword: /dts-v1/\n"); + dts_version = 1; + BEGIN_DEFAULT(); + return DT_V1; + } + YY_BREAK +case 4: +YY_RULE_SETUP +#line 96 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Keyword: /memreserve/\n"); + BEGIN_DEFAULT(); + return DT_MEMRESERVE; + } + YY_BREAK +case 5: +YY_RULE_SETUP +#line 104 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Label: %s\n", yytext); + yylval.labelref = strdup(yytext); + yylval.labelref[yyleng-1] = '\0'; + return DT_LABEL; + } + YY_BREAK +case 6: +YY_RULE_SETUP +#line 113 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + if (*yytext == 'b') + yylval.cbase = 2; + else if (*yytext == 'o') + yylval.cbase = 8; + else if (*yytext == 'd') + yylval.cbase = 10; + else + yylval.cbase = 16; + DPRINT("Base: %d\n", yylval.cbase); + return DT_BASE; + } + YY_BREAK +case 7: +YY_RULE_SETUP +#line 128 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LEGACYLITERAL; + } + YY_BREAK +case 8: +YY_RULE_SETUP +#line 136 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LITERAL; + } + YY_BREAK +case 9: +YY_RULE_SETUP +#line 144 "dtc-lexer.l" +{ /* label reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + YY_BREAK +case 10: +YY_RULE_SETUP +#line 152 "dtc-lexer.l" +{ /* new-style path reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yytext[yyleng-1] = '\0'; + DPRINT("Ref: %s\n", yytext+2); + yylval.labelref = strdup(yytext+2); + return DT_REF; + } + YY_BREAK +case 11: +YY_RULE_SETUP +#line 161 "dtc-lexer.l" +{ /* old-style path reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + YY_BREAK +case 12: +YY_RULE_SETUP +#line 169 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.byte = strtol(yytext, NULL, 16); + DPRINT("Byte: %02x\n", (int)yylval.byte); + return DT_BYTE; + } + YY_BREAK +case 13: +YY_RULE_SETUP +#line 177 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("/BYTESTRING\n"); + BEGIN_DEFAULT(); + return ']'; + } + YY_BREAK +case 14: +YY_RULE_SETUP +#line 185 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("PropNodeName: %s\n", yytext); + yylval.propnodename = strdup(yytext); + BEGIN_DEFAULT(); + return DT_PROPNODENAME; + } + YY_BREAK +case 15: +YY_RULE_SETUP +#line 194 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Binary Include\n"); + return DT_INCBIN; + } + YY_BREAK +case 16: +/* rule 16 can match eol */ +YY_RULE_SETUP +#line 201 "dtc-lexer.l" +/* eat whitespace */ + YY_BREAK +case 17: +/* rule 17 can match eol */ +YY_RULE_SETUP +#line 202 "dtc-lexer.l" +/* eat C-style comments */ + YY_BREAK +case 18: +/* rule 18 can match eol */ +YY_RULE_SETUP +#line 203 "dtc-lexer.l" +/* eat C++-style comments */ + YY_BREAK +case 19: +YY_RULE_SETUP +#line 205 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Char: %c (\\x%02x)\n", yytext[0], + (unsigned)yytext[0]); + if (yytext[0] == '[') { + DPRINT("\n"); + BEGIN(BYTESTRING); + } + if ((yytext[0] == '{') + || (yytext[0] == ';')) { + DPRINT("\n"); + BEGIN(PROPNODENAME); + } + return yytext[0]; + } + YY_BREAK +case 20: +YY_RULE_SETUP +#line 222 "dtc-lexer.l" +ECHO; + YY_BREAK +#line 1120 "dtc-lexer.lex.c" + + case YY_END_OF_BUFFER: + { + /* Amount of text matched not including the EOB char. */ + int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; + + /* Undo the effects of YY_DO_BEFORE_ACTION. */ + *yy_cp = (yy_hold_char); + YY_RESTORE_YY_MORE_OFFSET + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) + { + /* We're scanning a new file or input source. It's + * possible that this happened because the user + * just pointed yyin at a new source and called + * yylex(). If so, then we have to assure + * consistency between YY_CURRENT_BUFFER and our + * globals. Here is the right place to do so, because + * this is the first action (other than possibly a + * back-up) that will match for the new input source. + */ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; + } + + /* Note that here we test for yy_c_buf_p "<=" to the position + * of the first EOB in the buffer, since yy_c_buf_p will + * already have been incremented past the NUL character + * (since all states make transitions on EOB to the + * end-of-buffer state). Contrast this with the test + * in input(). + */ + if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + { /* This was really a NUL. */ + yy_state_type yy_next_state; + + (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + /* Okay, we're now positioned to make the NUL + * transition. We couldn't have + * yy_get_previous_state() go ahead and do it + * for us because it doesn't know how to deal + * with the possibility of jamming (and we don't + * want to build jamming into it because then it + * will run more slowly). + */ + + yy_next_state = yy_try_NUL_trans( yy_current_state ); + + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + + if ( yy_next_state ) + { + /* Consume the NUL. */ + yy_cp = ++(yy_c_buf_p); + yy_current_state = yy_next_state; + goto yy_match; + } + + else + { + yy_cp = (yy_c_buf_p); + goto yy_find_action; + } + } + + else switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_END_OF_FILE: + { + (yy_did_buffer_switch_on_eof) = 0; + + if ( yywrap( ) ) + { + /* Note: because we've taken care in + * yy_get_next_buffer() to have set up + * yytext, we can now set up + * yy_c_buf_p so that if some total + * hoser (like flex itself) wants to + * call the scanner after we return the + * YY_NULL, it'll still work - another + * YY_NULL will get returned. + */ + (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; + + yy_act = YY_STATE_EOF(YY_START); + goto do_action; + } + + else + { + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; + } + break; + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = + (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_match; + + case EOB_ACT_LAST_MATCH: + (yy_c_buf_p) = + &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_find_action; + } + break; + } + + default: + YY_FATAL_ERROR( + "fatal flex scanner internal error--no action found" ); + } /* end of action switch */ + } /* end of scanning one token */ +} /* end of yylex */ + +/* yy_get_next_buffer - try to read in a new buffer + * + * Returns a code representing an action: + * EOB_ACT_LAST_MATCH - + * EOB_ACT_CONTINUE_SCAN - continue scanning from current position + * EOB_ACT_END_OF_FILE - end of file + */ +static int yy_get_next_buffer (void) +{ + register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; + register char *source = (yytext_ptr); + register int number_to_move, i; + int ret_val; + + if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) + YY_FATAL_ERROR( + "fatal flex scanner internal error--end of buffer missed" ); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) + { /* Don't try to fill the buffer, so this is an EOF. */ + if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) + { + /* We matched a single character, the EOB, so + * treat this as a final EOF. + */ + return EOB_ACT_END_OF_FILE; + } + + else + { + /* We matched some text prior to the EOB, first + * process it. + */ + return EOB_ACT_LAST_MATCH; + } + } + + /* Try to read more data. */ + + /* First move last chars to start of buffer. */ + number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; + + for ( i = 0; i < number_to_move; ++i ) + *(dest++) = *(source++); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) + /* don't do the read, it's not guaranteed to return an EOF, + * just force an EOF + */ + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; + + else + { + int num_to_read = + YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; + + while ( num_to_read <= 0 ) + { /* Not enough room in the buffer - grow it. */ + + /* just a shorter name for the current buffer */ + YY_BUFFER_STATE b = YY_CURRENT_BUFFER; + + int yy_c_buf_p_offset = + (int) ((yy_c_buf_p) - b->yy_ch_buf); + + if ( b->yy_is_our_buffer ) + { + int new_size = b->yy_buf_size * 2; + + if ( new_size <= 0 ) + b->yy_buf_size += b->yy_buf_size / 8; + else + b->yy_buf_size *= 2; + + b->yy_ch_buf = (char *) + /* Include room in for 2 EOB chars. */ + yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 ); + } + else + /* Can't grow it, we don't own it. */ + b->yy_ch_buf = 0; + + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( + "fatal error - scanner input buffer overflow" ); + + (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset]; + + num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - + number_to_move - 1; + + } + + if ( num_to_read > YY_READ_BUF_SIZE ) + num_to_read = YY_READ_BUF_SIZE; + + /* Read in more data. */ + YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), + (yy_n_chars), (size_t) num_to_read ); + + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + if ( (yy_n_chars) == 0 ) + { + if ( number_to_move == YY_MORE_ADJ ) + { + ret_val = EOB_ACT_END_OF_FILE; + yyrestart(yyin ); + } + + else + { + ret_val = EOB_ACT_LAST_MATCH; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = + YY_BUFFER_EOF_PENDING; + } + } + + else + ret_val = EOB_ACT_CONTINUE_SCAN; + + if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { + /* Extend the array by 50%, plus the number we really need. */ + yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); + if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); + } + + (yy_n_chars) += number_to_move; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; + + (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; + + return ret_val; +} + +/* yy_get_previous_state - get the state just before the EOB char was reached */ + + static yy_state_type yy_get_previous_state (void) +{ + register yy_state_type yy_current_state; + register char *yy_cp; + + yy_current_state = (yy_start); + + for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) + { + register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 104 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + } + + return yy_current_state; +} + +/* yy_try_NUL_trans - try to make a transition on the NUL character + * + * synopsis + * next_state = yy_try_NUL_trans( current_state ); + */ + static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) +{ + register int yy_is_jam; + register char *yy_cp = (yy_c_buf_p); + + register YY_CHAR yy_c = 1; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 104 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + yy_is_jam = (yy_current_state == 103); + + return yy_is_jam ? 0 : yy_current_state; +} + +#ifndef YY_NO_INPUT +#ifdef __cplusplus + static int yyinput (void) +#else + static int input (void) +#endif + +{ + int c; + + *(yy_c_buf_p) = (yy_hold_char); + + if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) + { + /* yy_c_buf_p now points to the character we want to return. + * If this occurs *before* the EOB characters, then it's a + * valid NUL; if not, then we've hit the end of the buffer. + */ + if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + /* This was really a NUL. */ + *(yy_c_buf_p) = '\0'; + + else + { /* need more input */ + int offset = (yy_c_buf_p) - (yytext_ptr); + ++(yy_c_buf_p); + + switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_LAST_MATCH: + /* This happens because yy_g_n_b() + * sees that we've accumulated a + * token and flags that we need to + * try matching the token before + * proceeding. But for input(), + * there's no matching to consider. + * So convert the EOB_ACT_LAST_MATCH + * to EOB_ACT_END_OF_FILE. + */ + + /* Reset buffer status. */ + yyrestart(yyin ); + + /*FALLTHROUGH*/ + + case EOB_ACT_END_OF_FILE: + { + if ( yywrap( ) ) + return EOF; + + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; +#ifdef __cplusplus + return yyinput(); +#else + return input(); +#endif + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = (yytext_ptr) + offset; + break; + } + } + } + + c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ + *(yy_c_buf_p) = '\0'; /* preserve yytext */ + (yy_hold_char) = *++(yy_c_buf_p); + + if ( c == '\n' ) + + yylineno++; +; + + return c; +} +#endif /* ifndef YY_NO_INPUT */ + +/** Immediately switch to a different input stream. + * @param input_file A readable stream. + * + * @note This function does not reset the start condition to @c INITIAL . + */ + void yyrestart (FILE * input_file ) +{ + + if ( ! YY_CURRENT_BUFFER ){ + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_init_buffer(YY_CURRENT_BUFFER,input_file ); + yy_load_buffer_state( ); +} + +/** Switch to a different input buffer. + * @param new_buffer The new input buffer. + * + */ + void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) +{ + + /* TODO. We should be able to replace this entire function body + * with + * yypop_buffer_state(); + * yypush_buffer_state(new_buffer); + */ + yyensure_buffer_stack (); + if ( YY_CURRENT_BUFFER == new_buffer ) + return; + + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + YY_CURRENT_BUFFER_LVALUE = new_buffer; + yy_load_buffer_state( ); + + /* We don't actually know whether we did this switch during + * EOF (yywrap()) processing, but the only time this flag + * is looked at is after yywrap() is called, so it's safe + * to go ahead and always set it. + */ + (yy_did_buffer_switch_on_eof) = 1; +} + +static void yy_load_buffer_state (void) +{ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; + yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; + (yy_hold_char) = *(yy_c_buf_p); +} + +/** Allocate and initialize an input buffer state. + * @param file A readable stream. + * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. + * + * @return the allocated buffer state. + */ + YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) +{ + YY_BUFFER_STATE b; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_buf_size = size; + + /* yy_ch_buf has to be 2 characters longer than the size given because + * we need to put in 2 end-of-buffer characters. + */ + b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_is_our_buffer = 1; + + yy_init_buffer(b,file ); + + return b; +} + +/** Destroy the buffer. + * @param b a buffer created with yy_create_buffer() + * + */ + void yy_delete_buffer (YY_BUFFER_STATE b ) +{ + + if ( ! b ) + return; + + if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ + YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; + + if ( b->yy_is_our_buffer ) + yyfree((void *) b->yy_ch_buf ); + + yyfree((void *) b ); +} + +#ifndef __cplusplus +extern int isatty (int ); +#endif /* __cplusplus */ + +/* Initializes or reinitializes a buffer. + * This function is sometimes called more than once on the same buffer, + * such as during a yyrestart() or at EOF. + */ + static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) + +{ + int oerrno = errno; + + yy_flush_buffer(b ); + + b->yy_input_file = file; + b->yy_fill_buffer = 1; + + /* If b is the current buffer, then yy_init_buffer was _probably_ + * called from yyrestart() or through yy_get_next_buffer. + * In that case, we don't want to reset the lineno or column. + */ + if (b != YY_CURRENT_BUFFER){ + b->yy_bs_lineno = 1; + b->yy_bs_column = 0; + } + + b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; + + errno = oerrno; +} + +/** Discard all buffered characters. On the next scan, YY_INPUT will be called. + * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. + * + */ + void yy_flush_buffer (YY_BUFFER_STATE b ) +{ + if ( ! b ) + return; + + b->yy_n_chars = 0; + + /* We always need two end-of-buffer characters. The first causes + * a transition to the end-of-buffer state. The second causes + * a jam in that state. + */ + b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; + b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; + + b->yy_buf_pos = &b->yy_ch_buf[0]; + + b->yy_at_bol = 1; + b->yy_buffer_status = YY_BUFFER_NEW; + + if ( b == YY_CURRENT_BUFFER ) + yy_load_buffer_state( ); +} + +/** Pushes the new state onto the stack. The new state becomes + * the current state. This function will allocate the stack + * if necessary. + * @param new_buffer The new state. + * + */ +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) +{ + if (new_buffer == NULL) + return; + + yyensure_buffer_stack(); + + /* This block is copied from yy_switch_to_buffer. */ + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + /* Only push if top exists. Otherwise, replace top. */ + if (YY_CURRENT_BUFFER) + (yy_buffer_stack_top)++; + YY_CURRENT_BUFFER_LVALUE = new_buffer; + + /* copied from yy_switch_to_buffer. */ + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; +} + +/** Removes and deletes the top of the stack, if present. + * The next element becomes the new top. + * + */ +void yypop_buffer_state (void) +{ + if (!YY_CURRENT_BUFFER) + return; + + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + if ((yy_buffer_stack_top) > 0) + --(yy_buffer_stack_top); + + if (YY_CURRENT_BUFFER) { + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; + } +} + +/* Allocates the stack if it does not exist. + * Guarantees space for at least one push. + */ +static void yyensure_buffer_stack (void) +{ + int num_to_alloc; + + if (!(yy_buffer_stack)) { + + /* First allocation is just for 2 elements, since we don't know if this + * scanner will even need a stack. We use 2 instead of 1 to avoid an + * immediate realloc on the next call. + */ + num_to_alloc = 1; + (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc + (num_to_alloc * sizeof(struct yy_buffer_state*) + ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); + + memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); + + (yy_buffer_stack_max) = num_to_alloc; + (yy_buffer_stack_top) = 0; + return; + } + + if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ + + /* Increase the buffer to prepare for a possible push. */ + int grow_size = 8 /* arbitrary grow size */; + + num_to_alloc = (yy_buffer_stack_max) + grow_size; + (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc + ((yy_buffer_stack), + num_to_alloc * sizeof(struct yy_buffer_state*) + ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); + + /* zero only the new slots.*/ + memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); + (yy_buffer_stack_max) = num_to_alloc; + } +} + +/** Setup the input buffer state to scan directly from a user-specified character buffer. + * @param base the character buffer + * @param size the size in bytes of the character buffer + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) +{ + YY_BUFFER_STATE b; + + if ( size < 2 || + base[size-2] != YY_END_OF_BUFFER_CHAR || + base[size-1] != YY_END_OF_BUFFER_CHAR ) + /* They forgot to leave room for the EOB's. */ + return 0; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); + + b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ + b->yy_buf_pos = b->yy_ch_buf = base; + b->yy_is_our_buffer = 0; + b->yy_input_file = 0; + b->yy_n_chars = b->yy_buf_size; + b->yy_is_interactive = 0; + b->yy_at_bol = 1; + b->yy_fill_buffer = 0; + b->yy_buffer_status = YY_BUFFER_NEW; + + yy_switch_to_buffer(b ); + + return b; +} + +/** Setup the input buffer state to scan a string. The next call to yylex() will + * scan from a @e copy of @a str. + * @param yystr a NUL-terminated string to scan + * + * @return the newly allocated buffer state object. + * @note If you want to scan bytes that may contain NUL values, then use + * yy_scan_bytes() instead. + */ +YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) +{ + + return yy_scan_bytes(yystr,strlen(yystr) ); +} + +/** Setup the input buffer state to scan the given bytes. The next call to yylex() will + * scan from a @e copy of @a bytes. + * @param bytes the byte buffer to scan + * @param len the number of bytes in the buffer pointed to by @a bytes. + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) +{ + YY_BUFFER_STATE b; + char *buf; + yy_size_t n; + int i; + + /* Get memory for full buffer, including space for trailing EOB's. */ + n = _yybytes_len + 2; + buf = (char *) yyalloc(n ); + if ( ! buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); + + for ( i = 0; i < _yybytes_len; ++i ) + buf[i] = yybytes[i]; + + buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; + + b = yy_scan_buffer(buf,n ); + if ( ! b ) + YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); + + /* It's okay to grow etc. this buffer, and we should throw it + * away when we're done. + */ + b->yy_is_our_buffer = 1; + + return b; +} + +#ifndef YY_EXIT_FAILURE +#define YY_EXIT_FAILURE 2 +#endif + +static void yy_fatal_error (yyconst char* msg ) +{ + (void) fprintf( stderr, "%s\n", msg ); + exit( YY_EXIT_FAILURE ); +} + +/* Redefine yyless() so it works in section 3 code. */ + +#undef yyless +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + yytext[yyleng] = (yy_hold_char); \ + (yy_c_buf_p) = yytext + yyless_macro_arg; \ + (yy_hold_char) = *(yy_c_buf_p); \ + *(yy_c_buf_p) = '\0'; \ + yyleng = yyless_macro_arg; \ + } \ + while ( 0 ) + +/* Accessor methods (get/set functions) to struct members. */ + +/** Get the current line number. + * + */ +int yyget_lineno (void) +{ + + return yylineno; +} + +/** Get the input stream. + * + */ +FILE *yyget_in (void) +{ + return yyin; +} + +/** Get the output stream. + * + */ +FILE *yyget_out (void) +{ + return yyout; +} + +/** Get the length of the current token. + * + */ +int yyget_leng (void) +{ + return yyleng; +} + +/** Get the current token. + * + */ + +char *yyget_text (void) +{ + return yytext; +} + +/** Set the current line number. + * @param line_number + * + */ +void yyset_lineno (int line_number ) +{ + + yylineno = line_number; +} + +/** Set the input stream. This does not discard the current + * input buffer. + * @param in_str A readable stream. + * + * @see yy_switch_to_buffer + */ +void yyset_in (FILE * in_str ) +{ + yyin = in_str ; +} + +void yyset_out (FILE * out_str ) +{ + yyout = out_str ; +} + +int yyget_debug (void) +{ + return yy_flex_debug; +} + +void yyset_debug (int bdebug ) +{ + yy_flex_debug = bdebug ; +} + +static int yy_init_globals (void) +{ + /* Initialization is the same as for the non-reentrant scanner. + * This function is called from yylex_destroy(), so don't allocate here. + */ + + /* We do not touch yylineno unless the option is enabled. */ + yylineno = 1; + + (yy_buffer_stack) = 0; + (yy_buffer_stack_top) = 0; + (yy_buffer_stack_max) = 0; + (yy_c_buf_p) = (char *) 0; + (yy_init) = 0; + (yy_start) = 0; + +/* Defined in main.c */ +#ifdef YY_STDINIT + yyin = stdin; + yyout = stdout; +#else + yyin = (FILE *) 0; + yyout = (FILE *) 0; +#endif + + /* For future reference: Set errno on error, since we are called by + * yylex_init() + */ + return 0; +} + +/* yylex_destroy is for both reentrant and non-reentrant scanners. */ +int yylex_destroy (void) +{ + + /* Pop the buffer stack, destroying each element. */ + while(YY_CURRENT_BUFFER){ + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + yypop_buffer_state(); + } + + /* Destroy the stack itself. */ + yyfree((yy_buffer_stack) ); + (yy_buffer_stack) = NULL; + + /* Reset the globals. This is important in a non-reentrant scanner so the next time + * yylex() is called, initialization will occur. */ + yy_init_globals( ); + + return 0; +} + +/* + * Internal utility routines. + */ + +#ifndef yytext_ptr +static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) +{ + register int i; + for ( i = 0; i < n; ++i ) + s1[i] = s2[i]; +} +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * s ) +{ + register int n; + for ( n = 0; s[n]; ++n ) + ; + + return n; +} +#endif + +void *yyalloc (yy_size_t size ) +{ + return (void *) malloc( size ); +} + +void *yyrealloc (void * ptr, yy_size_t size ) +{ + /* The cast to (char *) in the following accommodates both + * implementations that use char* generic pointers, and those + * that use void* generic pointers. It works with the latter + * because both ANSI C and C++ allow castless assignment from + * any pointer type to void*, and deal with argument conversions + * as though doing an assignment. + */ + return (void *) realloc( (char *) ptr, size ); +} + +void yyfree (void * ptr ) +{ + free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ +} + +#define YYTABLES_NAME "yytables" + +#line 222 "dtc-lexer.l" + + + + +/* + * Stack of nested include file contexts. + */ + +struct incl_file { + struct dtc_file *file; + YY_BUFFER_STATE yy_prev_buf; + int yy_prev_lineno; + struct incl_file *prev; +}; + +static struct incl_file *incl_file_stack; + + +/* + * Detect infinite include recursion. + */ +#define MAX_INCLUDE_DEPTH (100) + +static int incl_depth = 0; + + +static void push_input_file(const char *filename) +{ + struct incl_file *incl_file; + struct dtc_file *newfile; + struct search_path search, *searchptr = NULL; + + assert(filename); + + if (incl_depth++ >= MAX_INCLUDE_DEPTH) + die("Includes nested too deeply"); + + if (srcpos_file) { + search.dir = srcpos_file->dir; + search.next = NULL; + search.prev = NULL; + searchptr = &search; + } + + newfile = dtc_open_file(filename, searchptr); + + incl_file = xmalloc(sizeof(struct incl_file)); + + /* + * Save current context. + */ + incl_file->yy_prev_buf = YY_CURRENT_BUFFER; + incl_file->yy_prev_lineno = yylineno; + incl_file->file = srcpos_file; + incl_file->prev = incl_file_stack; + + incl_file_stack = incl_file; + + /* + * Establish new context. + */ + srcpos_file = newfile; + yylineno = 1; + yyin = newfile->file; + yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); +} + + +static int pop_input_file(void) +{ + struct incl_file *incl_file; + + if (incl_file_stack == 0) + return 0; + + dtc_close_file(srcpos_file); + + /* + * Pop. + */ + --incl_depth; + incl_file = incl_file_stack; + incl_file_stack = incl_file->prev; + + /* + * Recover old context. + */ + yy_delete_buffer(YY_CURRENT_BUFFER); + yy_switch_to_buffer(incl_file->yy_prev_buf); + yylineno = incl_file->yy_prev_lineno; + srcpos_file = incl_file->file; + yyin = incl_file->file ? incl_file->file->file : NULL; + + /* + * Free old state. + */ + free(incl_file); + + return 1; +} + diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/dtc-parser.tab.c_shipped linux-2.6.30-rc4-git/scripts/dtc/dtc-parser.tab.c_shipped --- linux-2.6.30-rc4/scripts/dtc/dtc-parser.tab.c_shipped 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/dtc-parser.tab.c_shipped 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,2040 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton implementation for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* C LALR(1) parser skeleton written by Richard Stallman, by + simplifying the original so-called "semantic" parser. */ + +/* All symbols defined below should begin with yy or YY, to avoid + infringing on user name space. This should be done even for local + variables, as they might otherwise be expanded by user macros. + There are some unavoidable exceptions within include files to + define necessary library symbols; they are noted "INFRINGES ON + USER NAME SPACE" below. */ + +/* Identify Bison output. */ +#define YYBISON 1 + +/* Bison version. */ +#define YYBISON_VERSION "2.3" + +/* Skeleton name. */ +#define YYSKELETON_NAME "yacc.c" + +/* Pure parsers. */ +#define YYPURE 0 + +/* Using locations. */ +#define YYLSP_NEEDED 1 + + + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + DT_V1 = 258, + DT_MEMRESERVE = 259, + DT_PROPNODENAME = 260, + DT_LITERAL = 261, + DT_LEGACYLITERAL = 262, + DT_BASE = 263, + DT_BYTE = 264, + DT_STRING = 265, + DT_LABEL = 266, + DT_REF = 267, + DT_INCBIN = 268 + }; +#endif +/* Tokens. */ +#define DT_V1 258 +#define DT_MEMRESERVE 259 +#define DT_PROPNODENAME 260 +#define DT_LITERAL 261 +#define DT_LEGACYLITERAL 262 +#define DT_BASE 263 +#define DT_BYTE 264 +#define DT_STRING 265 +#define DT_LABEL 266 +#define DT_REF 267 +#define DT_INCBIN 268 + + + + +/* Copy the first part of user declarations. */ +#line 23 "dtc-parser.y" + +#include + +#include "dtc.h" +#include "srcpos.h" + +extern int yylex(void); + +extern struct boot_info *the_boot_info; +extern int treesource_error; + +static unsigned long long eval_literal(const char *s, int base, int bits); + + +/* Enabling traces. */ +#ifndef YYDEBUG +# define YYDEBUG 0 +#endif + +/* Enabling verbose error messages. */ +#ifdef YYERROR_VERBOSE +# undef YYERROR_VERBOSE +# define YYERROR_VERBOSE 1 +#else +# define YYERROR_VERBOSE 0 +#endif + +/* Enabling the token table. */ +#ifndef YYTOKEN_TABLE +# define YYTOKEN_TABLE 0 +#endif + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 37 "dtc-parser.y" +{ + char *propnodename; + char *literal; + char *labelref; + unsigned int cbase; + uint8_t byte; + struct data data; + + uint64_t addr; + cell_t cell; + struct property *prop; + struct property *proplist; + struct node *node; + struct node *nodelist; + struct reserve_info *re; +} +/* Line 187 of yacc.c. */ +#line 153 "dtc-parser.tab.c" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + +#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED +typedef struct YYLTYPE +{ + int first_line; + int first_column; + int last_line; + int last_column; +} YYLTYPE; +# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ +# define YYLTYPE_IS_DECLARED 1 +# define YYLTYPE_IS_TRIVIAL 1 +#endif + + +/* Copy the second part of user declarations. */ + + +/* Line 216 of yacc.c. */ +#line 178 "dtc-parser.tab.c" + +#ifdef short +# undef short +#endif + +#ifdef YYTYPE_UINT8 +typedef YYTYPE_UINT8 yytype_uint8; +#else +typedef unsigned char yytype_uint8; +#endif + +#ifdef YYTYPE_INT8 +typedef YYTYPE_INT8 yytype_int8; +#elif (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +typedef signed char yytype_int8; +#else +typedef short int yytype_int8; +#endif + +#ifdef YYTYPE_UINT16 +typedef YYTYPE_UINT16 yytype_uint16; +#else +typedef unsigned short int yytype_uint16; +#endif + +#ifdef YYTYPE_INT16 +typedef YYTYPE_INT16 yytype_int16; +#else +typedef short int yytype_int16; +#endif + +#ifndef YYSIZE_T +# ifdef __SIZE_TYPE__ +# define YYSIZE_T __SIZE_TYPE__ +# elif defined size_t +# define YYSIZE_T size_t +# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include /* INFRINGES ON USER NAME SPACE */ +# define YYSIZE_T size_t +# else +# define YYSIZE_T unsigned int +# endif +#endif + +#define YYSIZE_MAXIMUM ((YYSIZE_T) -1) + +#ifndef YY_ +# if YYENABLE_NLS +# if ENABLE_NLS +# include /* INFRINGES ON USER NAME SPACE */ +# define YY_(msgid) dgettext ("bison-runtime", msgid) +# endif +# endif +# ifndef YY_ +# define YY_(msgid) msgid +# endif +#endif + +/* Suppress unused-variable warnings by "using" E. */ +#if ! defined lint || defined __GNUC__ +# define YYUSE(e) ((void) (e)) +#else +# define YYUSE(e) /* empty */ +#endif + +/* Identity function, used to suppress warnings about constant conditions. */ +#ifndef lint +# define YYID(n) (n) +#else +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static int +YYID (int i) +#else +static int +YYID (i) + int i; +#endif +{ + return i; +} +#endif + +#if ! defined yyoverflow || YYERROR_VERBOSE + +/* The parser invokes alloca or malloc; define the necessary symbols. */ + +# ifdef YYSTACK_USE_ALLOCA +# if YYSTACK_USE_ALLOCA +# ifdef __GNUC__ +# define YYSTACK_ALLOC __builtin_alloca +# elif defined __BUILTIN_VA_ARG_INCR +# include /* INFRINGES ON USER NAME SPACE */ +# elif defined _AIX +# define YYSTACK_ALLOC __alloca +# elif defined _MSC_VER +# include /* INFRINGES ON USER NAME SPACE */ +# define alloca _alloca +# else +# define YYSTACK_ALLOC alloca +# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# endif +# endif +# endif + +# ifdef YYSTACK_ALLOC + /* Pacify GCC's `empty if-body' warning. */ +# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) +# ifndef YYSTACK_ALLOC_MAXIMUM + /* The OS might guarantee only one guard page at the bottom of the stack, + and a page size can be as small as 4096 bytes. So we cannot safely + invoke alloca (N) if N exceeds 4096. Use a slightly smaller number + to allow for a few compiler-allocated temporary stack slots. */ +# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */ +# endif +# else +# define YYSTACK_ALLOC YYMALLOC +# define YYSTACK_FREE YYFREE +# ifndef YYSTACK_ALLOC_MAXIMUM +# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM +# endif +# if (defined __cplusplus && ! defined _STDLIB_H \ + && ! ((defined YYMALLOC || defined malloc) \ + && (defined YYFREE || defined free))) +# include /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# ifndef YYMALLOC +# define YYMALLOC malloc +# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# ifndef YYFREE +# define YYFREE free +# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void free (void *); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# endif +#endif /* ! defined yyoverflow || YYERROR_VERBOSE */ + + +#if (! defined yyoverflow \ + && (! defined __cplusplus \ + || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \ + && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) + +/* A type that is properly aligned for any stack member. */ +union yyalloc +{ + yytype_int16 yyss; + YYSTYPE yyvs; + YYLTYPE yyls; +}; + +/* The size of the maximum gap between one aligned stack and the next. */ +# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) + +/* The size of an array large to enough to hold all stacks, each with + N elements. */ +# define YYSTACK_BYTES(N) \ + ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \ + + 2 * YYSTACK_GAP_MAXIMUM) + +/* Copy COUNT objects from FROM to TO. The source and destination do + not overlap. */ +# ifndef YYCOPY +# if defined __GNUC__ && 1 < __GNUC__ +# define YYCOPY(To, From, Count) \ + __builtin_memcpy (To, From, (Count) * sizeof (*(From))) +# else +# define YYCOPY(To, From, Count) \ + do \ + { \ + YYSIZE_T yyi; \ + for (yyi = 0; yyi < (Count); yyi++) \ + (To)[yyi] = (From)[yyi]; \ + } \ + while (YYID (0)) +# endif +# endif + +/* Relocate STACK from its old location to the new one. The + local variables YYSIZE and YYSTACKSIZE give the old and new number of + elements in the stack, and YYPTR gives the new location of the + stack. Advance YYPTR to a properly aligned location for the next + stack. */ +# define YYSTACK_RELOCATE(Stack) \ + do \ + { \ + YYSIZE_T yynewbytes; \ + YYCOPY (&yyptr->Stack, Stack, yysize); \ + Stack = &yyptr->Stack; \ + yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ + yyptr += yynewbytes / sizeof (*yyptr); \ + } \ + while (YYID (0)) + +#endif + +/* YYFINAL -- State number of the termination state. */ +#define YYFINAL 9 +/* YYLAST -- Last index in YYTABLE. */ +#define YYLAST 73 + +/* YYNTOKENS -- Number of terminals. */ +#define YYNTOKENS 27 +/* YYNNTS -- Number of nonterminals. */ +#define YYNNTS 20 +/* YYNRULES -- Number of rules. */ +#define YYNRULES 45 +/* YYNRULES -- Number of states. */ +#define YYNSTATES 76 + +/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ +#define YYUNDEFTOK 2 +#define YYMAXUTOK 268 + +#define YYTRANSLATE(YYX) \ + ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) + +/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ +static const yytype_uint8 yytranslate[] = +{ + 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 24, 26, 2, 2, 25, 15, 2, 16, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 14, + 20, 19, 21, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 22, 2, 23, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 17, 2, 18, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, + 5, 6, 7, 8, 9, 10, 11, 12, 13 +}; + +#if YYDEBUG +/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in + YYRHS. */ +static const yytype_uint8 yyprhs[] = +{ + 0, 0, 3, 8, 11, 12, 15, 21, 22, 25, + 27, 34, 36, 38, 41, 47, 48, 51, 57, 61, + 64, 69, 74, 77, 87, 93, 96, 97, 100, 103, + 104, 107, 110, 113, 114, 116, 118, 121, 122, 125, + 128, 129, 132, 135, 139, 140 +}; + +/* YYRHS -- A `-1'-separated list of the rules' RHS. */ +static const yytype_int8 yyrhs[] = +{ + 28, 0, -1, 3, 14, 29, 34, -1, 31, 34, + -1, -1, 30, 29, -1, 46, 4, 33, 33, 14, + -1, -1, 32, 31, -1, 30, -1, 46, 4, 33, + 15, 33, 14, -1, 6, -1, 7, -1, 16, 35, + -1, 17, 36, 44, 18, 14, -1, -1, 36, 37, + -1, 46, 5, 19, 38, 14, -1, 46, 5, 14, + -1, 39, 10, -1, 39, 20, 40, 21, -1, 39, + 22, 43, 23, -1, 39, 12, -1, 39, 13, 24, + 10, 25, 33, 25, 33, 26, -1, 39, 13, 24, + 10, 26, -1, 38, 11, -1, -1, 38, 25, -1, + 39, 11, -1, -1, 40, 42, -1, 40, 12, -1, + 40, 11, -1, -1, 8, -1, 6, -1, 41, 7, + -1, -1, 43, 9, -1, 43, 11, -1, -1, 45, + 44, -1, 45, 37, -1, 46, 5, 35, -1, -1, + 11, -1 +}; + +/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ +static const yytype_uint16 yyrline[] = +{ + 0, 89, 89, 93, 101, 104, 111, 119, 122, 129, + 133, 140, 144, 151, 158, 166, 169, 176, 180, 187, + 191, 195, 199, 203, 220, 231, 239, 242, 246, 254, + 257, 261, 266, 274, 277, 281, 285, 293, 296, 300, + 308, 311, 315, 323, 331, 334 +}; +#endif + +#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE +/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. + First, the terminals, then, starting at YYNTOKENS, nonterminals. */ +static const char *const yytname[] = +{ + "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE", + "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE", + "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'-'", + "'/'", "'{'", "'}'", "'='", "'<'", "'>'", "'['", "']'", "'('", "','", + "')'", "$accept", "sourcefile", "memreserves", "memreserve", + "v0_memreserves", "v0_memreserve", "addr", "devicetree", "nodedef", + "proplist", "propdef", "propdata", "propdataprefix", "celllist", + "cellbase", "cellval", "bytestring", "subnodes", "subnode", "label", 0 +}; +#endif + +# ifdef YYPRINT +/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to + token YYLEX-NUM. */ +static const yytype_uint16 yytoknum[] = +{ + 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, + 265, 266, 267, 268, 59, 45, 47, 123, 125, 61, + 60, 62, 91, 93, 40, 44, 41 +}; +# endif + +/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ +static const yytype_uint8 yyr1[] = +{ + 0, 27, 28, 28, 29, 29, 30, 31, 31, 32, + 32, 33, 33, 34, 35, 36, 36, 37, 37, 38, + 38, 38, 38, 38, 38, 38, 39, 39, 39, 40, + 40, 40, 40, 41, 41, 42, 42, 43, 43, 43, + 44, 44, 44, 45, 46, 46 +}; + +/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ +static const yytype_uint8 yyr2[] = +{ + 0, 2, 4, 2, 0, 2, 5, 0, 2, 1, + 6, 1, 1, 2, 5, 0, 2, 5, 3, 2, + 4, 4, 2, 9, 5, 2, 0, 2, 2, 0, + 2, 2, 2, 0, 1, 1, 2, 0, 2, 2, + 0, 2, 2, 3, 0, 1 +}; + +/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state + STATE-NUM when YYTABLE doesn't specify something else to do. Zero + means the default is an error. */ +static const yytype_uint8 yydefact[] = +{ + 7, 0, 45, 0, 9, 0, 7, 0, 4, 1, + 0, 3, 8, 0, 0, 4, 0, 15, 13, 11, + 12, 0, 2, 5, 0, 40, 0, 0, 0, 16, + 0, 40, 0, 0, 6, 0, 42, 41, 0, 10, + 14, 18, 26, 43, 0, 0, 25, 17, 27, 19, + 28, 22, 0, 29, 37, 0, 33, 0, 0, 35, + 34, 32, 31, 20, 0, 30, 38, 39, 21, 0, + 24, 36, 0, 0, 0, 23 +}; + +/* YYDEFGOTO[NTERM-NUM]. */ +static const yytype_int8 yydefgoto[] = +{ + -1, 3, 14, 4, 5, 6, 27, 11, 18, 25, + 29, 44, 45, 56, 64, 65, 57, 30, 31, 7 +}; + +/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing + STATE-NUM. */ +#define YYPACT_NINF -14 +static const yytype_int8 yypact[] = +{ + 30, -11, -14, 7, -14, -1, 27, 13, 27, -14, + 8, -14, -14, 40, -1, 27, 35, -14, -14, -14, + -14, 21, -14, -14, 40, 24, 40, 28, 40, -14, + 32, 24, 46, 38, -14, 39, -14, -14, 26, -14, + -14, -14, -14, -14, -9, 10, -14, -14, -14, -14, + -14, -14, 31, -14, -14, 44, -2, 3, 23, -14, + -14, -14, -14, -14, 50, -14, -14, -14, -14, 40, + -14, -14, 33, 40, 36, -14 +}; + +/* YYPGOTO[NTERM-NUM]. */ +static const yytype_int8 yypgoto[] = +{ + -14, -14, 48, 29, 53, -14, -13, 47, 34, -14, + 37, -14, -14, -14, -14, -14, -14, 42, -14, -7 +}; + +/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If + positive, shift that token. If negative, reduce the rule which + number is the opposite. If zero, do what YYDEFACT says. + If YYTABLE_NINF, syntax error. */ +#define YYTABLE_NINF -45 +static const yytype_int8 yytable[] = +{ + 21, 16, 46, 8, 59, 47, 60, 9, 16, 61, + 62, 28, 66, 33, 67, 10, 48, 13, 32, 63, + 49, 50, 51, 52, 32, 17, 68, 19, 20, -44, + 53, -44, 54, 1, -44, 2, 26, 15, 2, 24, + 41, 2, 34, 17, 15, 42, 19, 20, 69, 70, + 35, 38, 39, 40, 58, 55, 72, 71, 73, 12, + 74, 22, 75, 23, 0, 0, 0, 0, 36, 0, + 0, 0, 43, 37 +}; + +static const yytype_int8 yycheck[] = +{ + 13, 8, 11, 14, 6, 14, 8, 0, 15, 11, + 12, 24, 9, 26, 11, 16, 25, 4, 25, 21, + 10, 11, 12, 13, 31, 17, 23, 6, 7, 5, + 20, 4, 22, 3, 4, 11, 15, 8, 11, 4, + 14, 11, 14, 17, 15, 19, 6, 7, 25, 26, + 18, 5, 14, 14, 10, 24, 69, 7, 25, 6, + 73, 14, 26, 15, -1, -1, -1, -1, 31, -1, + -1, -1, 38, 31 +}; + +/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing + symbol of state STATE-NUM. */ +static const yytype_uint8 yystos[] = +{ + 0, 3, 11, 28, 30, 31, 32, 46, 14, 0, + 16, 34, 31, 4, 29, 30, 46, 17, 35, 6, + 7, 33, 34, 29, 4, 36, 15, 33, 33, 37, + 44, 45, 46, 33, 14, 18, 37, 44, 5, 14, + 14, 14, 19, 35, 38, 39, 11, 14, 25, 10, + 11, 12, 13, 20, 22, 24, 40, 43, 10, 6, + 8, 11, 12, 21, 41, 42, 9, 11, 23, 25, + 26, 7, 33, 25, 33, 26 +}; + +#define yyerrok (yyerrstatus = 0) +#define yyclearin (yychar = YYEMPTY) +#define YYEMPTY (-2) +#define YYEOF 0 + +#define YYACCEPT goto yyacceptlab +#define YYABORT goto yyabortlab +#define YYERROR goto yyerrorlab + + +/* Like YYERROR except do call yyerror. This remains here temporarily + to ease the transition to the new meaning of YYERROR, for GCC. + Once GCC version 2 has supplanted version 1, this can go. */ + +#define YYFAIL goto yyerrlab + +#define YYRECOVERING() (!!yyerrstatus) + +#define YYBACKUP(Token, Value) \ +do \ + if (yychar == YYEMPTY && yylen == 1) \ + { \ + yychar = (Token); \ + yylval = (Value); \ + yytoken = YYTRANSLATE (yychar); \ + YYPOPSTACK (1); \ + goto yybackup; \ + } \ + else \ + { \ + yyerror (YY_("syntax error: cannot back up")); \ + YYERROR; \ + } \ +while (YYID (0)) + + +#define YYTERROR 1 +#define YYERRCODE 256 + + +/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. + If N is 0, then set CURRENT to the empty location which ends + the previous symbol: RHS[0] (always defined). */ + +#define YYRHSLOC(Rhs, K) ((Rhs)[K]) +#ifndef YYLLOC_DEFAULT +# define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (YYID (N)) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + } \ + while (YYID (0)) +#endif + + +/* YY_LOCATION_PRINT -- Print the location on the stream. + This macro was not mandated originally: define only if we know + we won't break user code: when these are the locations we know. */ + +#ifndef YY_LOCATION_PRINT +# if YYLTYPE_IS_TRIVIAL +# define YY_LOCATION_PRINT(File, Loc) \ + fprintf (File, "%d.%d-%d.%d", \ + (Loc).first_line, (Loc).first_column, \ + (Loc).last_line, (Loc).last_column) +# else +# define YY_LOCATION_PRINT(File, Loc) ((void) 0) +# endif +#endif + + +/* YYLEX -- calling `yylex' with the right arguments. */ + +#ifdef YYLEX_PARAM +# define YYLEX yylex (YYLEX_PARAM) +#else +# define YYLEX yylex () +#endif + +/* Enable debugging if requested. */ +#if YYDEBUG + +# ifndef YYFPRINTF +# include /* INFRINGES ON USER NAME SPACE */ +# define YYFPRINTF fprintf +# endif + +# define YYDPRINTF(Args) \ +do { \ + if (yydebug) \ + YYFPRINTF Args; \ +} while (YYID (0)) + +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ +do { \ + if (yydebug) \ + { \ + YYFPRINTF (stderr, "%s ", Title); \ + yy_symbol_print (stderr, \ + Type, Value, Location); \ + YYFPRINTF (stderr, "\n"); \ + } \ +} while (YYID (0)) + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) +#else +static void +yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; + YYLTYPE const * const yylocationp; +#endif +{ + if (!yyvaluep) + return; + YYUSE (yylocationp); +# ifdef YYPRINT + if (yytype < YYNTOKENS) + YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); +# else + YYUSE (yyoutput); +# endif + switch (yytype) + { + default: + break; + } +} + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) +#else +static void +yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; + YYLTYPE const * const yylocationp; +#endif +{ + if (yytype < YYNTOKENS) + YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); + else + YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); + + YY_LOCATION_PRINT (yyoutput, *yylocationp); + YYFPRINTF (yyoutput, ": "); + yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp); + YYFPRINTF (yyoutput, ")"); +} + +/*------------------------------------------------------------------. +| yy_stack_print -- Print the state stack from its BOTTOM up to its | +| TOP (included). | +`------------------------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) +#else +static void +yy_stack_print (bottom, top) + yytype_int16 *bottom; + yytype_int16 *top; +#endif +{ + YYFPRINTF (stderr, "Stack now"); + for (; bottom <= top; ++bottom) + YYFPRINTF (stderr, " %d", *bottom); + YYFPRINTF (stderr, "\n"); +} + +# define YY_STACK_PRINT(Bottom, Top) \ +do { \ + if (yydebug) \ + yy_stack_print ((Bottom), (Top)); \ +} while (YYID (0)) + + +/*------------------------------------------------. +| Report that the YYRULE is going to be reduced. | +`------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_reduce_print (YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule) +#else +static void +yy_reduce_print (yyvsp, yylsp, yyrule) + YYSTYPE *yyvsp; + YYLTYPE *yylsp; + int yyrule; +#endif +{ + int yynrhs = yyr2[yyrule]; + int yyi; + unsigned long int yylno = yyrline[yyrule]; + YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", + yyrule - 1, yylno); + /* The symbols being reduced. */ + for (yyi = 0; yyi < yynrhs; yyi++) + { + fprintf (stderr, " $%d = ", yyi + 1); + yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], + &(yyvsp[(yyi + 1) - (yynrhs)]) + , &(yylsp[(yyi + 1) - (yynrhs)]) ); + fprintf (stderr, "\n"); + } +} + +# define YY_REDUCE_PRINT(Rule) \ +do { \ + if (yydebug) \ + yy_reduce_print (yyvsp, yylsp, Rule); \ +} while (YYID (0)) + +/* Nonzero means print parse trace. It is left uninitialized so that + multiple parsers can coexist. */ +int yydebug; +#else /* !YYDEBUG */ +# define YYDPRINTF(Args) +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) +# define YY_STACK_PRINT(Bottom, Top) +# define YY_REDUCE_PRINT(Rule) +#endif /* !YYDEBUG */ + + +/* YYINITDEPTH -- initial size of the parser's stacks. */ +#ifndef YYINITDEPTH +# define YYINITDEPTH 200 +#endif + +/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only + if the built-in stack extension method is used). + + Do not make this value too large; the results are undefined if + YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH) + evaluated with infinite-precision integer arithmetic. */ + +#ifndef YYMAXDEPTH +# define YYMAXDEPTH 10000 +#endif + + + +#if YYERROR_VERBOSE + +# ifndef yystrlen +# if defined __GLIBC__ && defined _STRING_H +# define yystrlen strlen +# else +/* Return the length of YYSTR. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static YYSIZE_T +yystrlen (const char *yystr) +#else +static YYSIZE_T +yystrlen (yystr) + const char *yystr; +#endif +{ + YYSIZE_T yylen; + for (yylen = 0; yystr[yylen]; yylen++) + continue; + return yylen; +} +# endif +# endif + +# ifndef yystpcpy +# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE +# define yystpcpy stpcpy +# else +/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in + YYDEST. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static char * +yystpcpy (char *yydest, const char *yysrc) +#else +static char * +yystpcpy (yydest, yysrc) + char *yydest; + const char *yysrc; +#endif +{ + char *yyd = yydest; + const char *yys = yysrc; + + while ((*yyd++ = *yys++) != '\0') + continue; + + return yyd - 1; +} +# endif +# endif + +# ifndef yytnamerr +/* Copy to YYRES the contents of YYSTR after stripping away unnecessary + quotes and backslashes, so that it's suitable for yyerror. The + heuristic is that double-quoting is unnecessary unless the string + contains an apostrophe, a comma, or backslash (other than + backslash-backslash). YYSTR is taken from yytname. If YYRES is + null, do not copy; instead, return the length of what the result + would have been. */ +static YYSIZE_T +yytnamerr (char *yyres, const char *yystr) +{ + if (*yystr == '"') + { + YYSIZE_T yyn = 0; + char const *yyp = yystr; + + for (;;) + switch (*++yyp) + { + case '\'': + case ',': + goto do_not_strip_quotes; + + case '\\': + if (*++yyp != '\\') + goto do_not_strip_quotes; + /* Fall through. */ + default: + if (yyres) + yyres[yyn] = *yyp; + yyn++; + break; + + case '"': + if (yyres) + yyres[yyn] = '\0'; + return yyn; + } + do_not_strip_quotes: ; + } + + if (! yyres) + return yystrlen (yystr); + + return yystpcpy (yyres, yystr) - yyres; +} +# endif + +/* Copy into YYRESULT an error message about the unexpected token + YYCHAR while in state YYSTATE. Return the number of bytes copied, + including the terminating null byte. If YYRESULT is null, do not + copy anything; just return the number of bytes that would be + copied. As a special case, return 0 if an ordinary "syntax error" + message will do. Return YYSIZE_MAXIMUM if overflow occurs during + size calculation. */ +static YYSIZE_T +yysyntax_error (char *yyresult, int yystate, int yychar) +{ + int yyn = yypact[yystate]; + + if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) + return 0; + else + { + int yytype = YYTRANSLATE (yychar); + YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); + YYSIZE_T yysize = yysize0; + YYSIZE_T yysize1; + int yysize_overflow = 0; + enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; + char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; + int yyx; + +# if 0 + /* This is so xgettext sees the translatable formats that are + constructed on the fly. */ + YY_("syntax error, unexpected %s"); + YY_("syntax error, unexpected %s, expecting %s"); + YY_("syntax error, unexpected %s, expecting %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); +# endif + char *yyfmt; + char const *yyf; + static char const yyunexpected[] = "syntax error, unexpected %s"; + static char const yyexpecting[] = ", expecting %s"; + static char const yyor[] = " or %s"; + char yyformat[sizeof yyunexpected + + sizeof yyexpecting - 1 + + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) + * (sizeof yyor - 1))]; + char const *yyprefix = yyexpecting; + + /* Start YYX at -YYN if negative to avoid negative indexes in + YYCHECK. */ + int yyxbegin = yyn < 0 ? -yyn : 0; + + /* Stay within bounds of both yycheck and yytname. */ + int yychecklim = YYLAST - yyn + 1; + int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; + int yycount = 1; + + yyarg[0] = yytname[yytype]; + yyfmt = yystpcpy (yyformat, yyunexpected); + + for (yyx = yyxbegin; yyx < yyxend; ++yyx) + if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) + { + if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) + { + yycount = 1; + yysize = yysize0; + yyformat[sizeof yyunexpected - 1] = '\0'; + break; + } + yyarg[yycount++] = yytname[yyx]; + yysize1 = yysize + yytnamerr (0, yytname[yyx]); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + yyfmt = yystpcpy (yyfmt, yyprefix); + yyprefix = yyor; + } + + yyf = YY_(yyformat); + yysize1 = yysize + yystrlen (yyf); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + + if (yysize_overflow) + return YYSIZE_MAXIMUM; + + if (yyresult) + { + /* Avoid sprintf, as that infringes on the user's name space. + Don't have undefined behavior even if the translation + produced a string with the wrong number of "%s"s. */ + char *yyp = yyresult; + int yyi = 0; + while ((*yyp = *yyf) != '\0') + { + if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) + { + yyp += yytnamerr (yyp, yyarg[yyi++]); + yyf += 2; + } + else + { + yyp++; + yyf++; + } + } + } + return yysize; + } +} +#endif /* YYERROR_VERBOSE */ + + +/*-----------------------------------------------. +| Release the memory associated to this symbol. | +`-----------------------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp) +#else +static void +yydestruct (yymsg, yytype, yyvaluep, yylocationp) + const char *yymsg; + int yytype; + YYSTYPE *yyvaluep; + YYLTYPE *yylocationp; +#endif +{ + YYUSE (yyvaluep); + YYUSE (yylocationp); + + if (!yymsg) + yymsg = "Deleting"; + YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); + + switch (yytype) + { + + default: + break; + } +} + + +/* Prevent warnings from -Wmissing-prototypes. */ + +#ifdef YYPARSE_PARAM +#if defined __STDC__ || defined __cplusplus +int yyparse (void *YYPARSE_PARAM); +#else +int yyparse (); +#endif +#else /* ! YYPARSE_PARAM */ +#if defined __STDC__ || defined __cplusplus +int yyparse (void); +#else +int yyparse (); +#endif +#endif /* ! YYPARSE_PARAM */ + + + +/* The look-ahead symbol. */ +int yychar; + +/* The semantic value of the look-ahead symbol. */ +YYSTYPE yylval; + +/* Number of syntax errors so far. */ +int yynerrs; +/* Location data for the look-ahead symbol. */ +YYLTYPE yylloc; + + + +/*----------. +| yyparse. | +`----------*/ + +#ifdef YYPARSE_PARAM +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void *YYPARSE_PARAM) +#else +int +yyparse (YYPARSE_PARAM) + void *YYPARSE_PARAM; +#endif +#else /* ! YYPARSE_PARAM */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void) +#else +int +yyparse () + +#endif +#endif +{ + + int yystate; + int yyn; + int yyresult; + /* Number of tokens to shift before error messages enabled. */ + int yyerrstatus; + /* Look-ahead token as an internal (translated) token number. */ + int yytoken = 0; +#if YYERROR_VERBOSE + /* Buffer for error messages, and its allocated size. */ + char yymsgbuf[128]; + char *yymsg = yymsgbuf; + YYSIZE_T yymsg_alloc = sizeof yymsgbuf; +#endif + + /* Three stacks and their tools: + `yyss': related to states, + `yyvs': related to semantic values, + `yyls': related to locations. + + Refer to the stacks thru separate pointers, to allow yyoverflow + to reallocate them elsewhere. */ + + /* The state stack. */ + yytype_int16 yyssa[YYINITDEPTH]; + yytype_int16 *yyss = yyssa; + yytype_int16 *yyssp; + + /* The semantic value stack. */ + YYSTYPE yyvsa[YYINITDEPTH]; + YYSTYPE *yyvs = yyvsa; + YYSTYPE *yyvsp; + + /* The location stack. */ + YYLTYPE yylsa[YYINITDEPTH]; + YYLTYPE *yyls = yylsa; + YYLTYPE *yylsp; + /* The locations where the error started and ended. */ + YYLTYPE yyerror_range[2]; + +#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N), yylsp -= (N)) + + YYSIZE_T yystacksize = YYINITDEPTH; + + /* The variables used to return semantic value and location from the + action routines. */ + YYSTYPE yyval; + YYLTYPE yyloc; + + /* The number of symbols on the RHS of the reduced rule. + Keep to zero when no symbol should be popped. */ + int yylen = 0; + + YYDPRINTF ((stderr, "Starting parse\n")); + + yystate = 0; + yyerrstatus = 0; + yynerrs = 0; + yychar = YYEMPTY; /* Cause a token to be read. */ + + /* Initialize stack pointers. + Waste one element of value and location stack + so that they stay on the same level as the state stack. + The wasted elements are never initialized. */ + + yyssp = yyss; + yyvsp = yyvs; + yylsp = yyls; +#if YYLTYPE_IS_TRIVIAL + /* Initialize the default location before parsing starts. */ + yylloc.first_line = yylloc.last_line = 1; + yylloc.first_column = yylloc.last_column = 0; +#endif + + goto yysetstate; + +/*------------------------------------------------------------. +| yynewstate -- Push a new state, which is found in yystate. | +`------------------------------------------------------------*/ + yynewstate: + /* In all cases, when you get here, the value and location stacks + have just been pushed. So pushing a state here evens the stacks. */ + yyssp++; + + yysetstate: + *yyssp = yystate; + + if (yyss + yystacksize - 1 <= yyssp) + { + /* Get the current used size of the three stacks, in elements. */ + YYSIZE_T yysize = yyssp - yyss + 1; + +#ifdef yyoverflow + { + /* Give user a chance to reallocate the stack. Use copies of + these so that the &'s don't force the real ones into + memory. */ + YYSTYPE *yyvs1 = yyvs; + yytype_int16 *yyss1 = yyss; + YYLTYPE *yyls1 = yyls; + + /* Each stack pointer address is followed by the size of the + data in use in that stack, in bytes. This used to be a + conditional around just the two extra args, but that might + be undefined if yyoverflow is a macro. */ + yyoverflow (YY_("memory exhausted"), + &yyss1, yysize * sizeof (*yyssp), + &yyvs1, yysize * sizeof (*yyvsp), + &yyls1, yysize * sizeof (*yylsp), + &yystacksize); + yyls = yyls1; + yyss = yyss1; + yyvs = yyvs1; + } +#else /* no yyoverflow */ +# ifndef YYSTACK_RELOCATE + goto yyexhaustedlab; +# else + /* Extend the stack our own way. */ + if (YYMAXDEPTH <= yystacksize) + goto yyexhaustedlab; + yystacksize *= 2; + if (YYMAXDEPTH < yystacksize) + yystacksize = YYMAXDEPTH; + + { + yytype_int16 *yyss1 = yyss; + union yyalloc *yyptr = + (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); + if (! yyptr) + goto yyexhaustedlab; + YYSTACK_RELOCATE (yyss); + YYSTACK_RELOCATE (yyvs); + YYSTACK_RELOCATE (yyls); +# undef YYSTACK_RELOCATE + if (yyss1 != yyssa) + YYSTACK_FREE (yyss1); + } +# endif +#endif /* no yyoverflow */ + + yyssp = yyss + yysize - 1; + yyvsp = yyvs + yysize - 1; + yylsp = yyls + yysize - 1; + + YYDPRINTF ((stderr, "Stack size increased to %lu\n", + (unsigned long int) yystacksize)); + + if (yyss + yystacksize - 1 <= yyssp) + YYABORT; + } + + YYDPRINTF ((stderr, "Entering state %d\n", yystate)); + + goto yybackup; + +/*-----------. +| yybackup. | +`-----------*/ +yybackup: + + /* Do appropriate processing given the current state. Read a + look-ahead token if we need one and don't already have one. */ + + /* First try to decide what to do without reference to look-ahead token. */ + yyn = yypact[yystate]; + if (yyn == YYPACT_NINF) + goto yydefault; + + /* Not known => get a look-ahead token if don't already have one. */ + + /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ + if (yychar == YYEMPTY) + { + YYDPRINTF ((stderr, "Reading a token: ")); + yychar = YYLEX; + } + + if (yychar <= YYEOF) + { + yychar = yytoken = YYEOF; + YYDPRINTF ((stderr, "Now at end of input.\n")); + } + else + { + yytoken = YYTRANSLATE (yychar); + YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); + } + + /* If the proper action on seeing token YYTOKEN is to reduce or to + detect an error, take that action. */ + yyn += yytoken; + if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) + goto yydefault; + yyn = yytable[yyn]; + if (yyn <= 0) + { + if (yyn == 0 || yyn == YYTABLE_NINF) + goto yyerrlab; + yyn = -yyn; + goto yyreduce; + } + + if (yyn == YYFINAL) + YYACCEPT; + + /* Count tokens shifted since error; after three, turn off error + status. */ + if (yyerrstatus) + yyerrstatus--; + + /* Shift the look-ahead token. */ + YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); + + /* Discard the shifted token unless it is eof. */ + if (yychar != YYEOF) + yychar = YYEMPTY; + + yystate = yyn; + *++yyvsp = yylval; + *++yylsp = yylloc; + goto yynewstate; + + +/*-----------------------------------------------------------. +| yydefault -- do the default action for the current state. | +`-----------------------------------------------------------*/ +yydefault: + yyn = yydefact[yystate]; + if (yyn == 0) + goto yyerrlab; + goto yyreduce; + + +/*-----------------------------. +| yyreduce -- Do a reduction. | +`-----------------------------*/ +yyreduce: + /* yyn is the number of a rule to reduce with. */ + yylen = yyr2[yyn]; + + /* If YYLEN is nonzero, implement the default value of the action: + `$$ = $1'. + + Otherwise, the following line sets YYVAL to garbage. + This behavior is undocumented and Bison + users should not rely upon it. Assigning to YYVAL + unconditionally makes the parser a bit smaller, and it avoids a + GCC warning that YYVAL may be used uninitialized. */ + yyval = yyvsp[1-yylen]; + + /* Default location. */ + YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen); + YY_REDUCE_PRINT (yyn); + switch (yyn) + { + case 2: +#line 90 "dtc-parser.y" + { + the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), 0); + ;} + break; + + case 3: +#line 94 "dtc-parser.y" + { + the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node), 0); + ;} + break; + + case 4: +#line 101 "dtc-parser.y" + { + (yyval.re) = NULL; + ;} + break; + + case 5: +#line 105 "dtc-parser.y" + { + (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); + ;} + break; + + case 6: +#line 112 "dtc-parser.y" + { + (yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref)); + ;} + break; + + case 7: +#line 119 "dtc-parser.y" + { + (yyval.re) = NULL; + ;} + break; + + case 8: +#line 123 "dtc-parser.y" + { + (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); + ;} + break; + + case 9: +#line 130 "dtc-parser.y" + { + (yyval.re) = (yyvsp[(1) - (1)].re); + ;} + break; + + case 10: +#line 134 "dtc-parser.y" + { + (yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref)); + ;} + break; + + case 11: +#line 141 "dtc-parser.y" + { + (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64); + ;} + break; + + case 12: +#line 145 "dtc-parser.y" + { + (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64); + ;} + break; + + case 13: +#line 152 "dtc-parser.y" + { + (yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL); + ;} + break; + + case 14: +#line 159 "dtc-parser.y" + { + (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist)); + ;} + break; + + case 15: +#line 166 "dtc-parser.y" + { + (yyval.proplist) = NULL; + ;} + break; + + case 16: +#line 170 "dtc-parser.y" + { + (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist)); + ;} + break; + + case 17: +#line 177 "dtc-parser.y" + { + (yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref)); + ;} + break; + + case 18: +#line 181 "dtc-parser.y" + { + (yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref)); + ;} + break; + + case 19: +#line 188 "dtc-parser.y" + { + (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data)); + ;} + break; + + case 20: +#line 192 "dtc-parser.y" + { + (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); + ;} + break; + + case 21: +#line 196 "dtc-parser.y" + { + (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); + ;} + break; + + case 22: +#line 200 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 23: +#line 204 "dtc-parser.y" + { + struct search_path path = { srcpos_file->dir, NULL, NULL }; + struct dtc_file *file = dtc_open_file((yyvsp[(4) - (9)].data).val, &path); + struct data d = empty_data; + + if ((yyvsp[(6) - (9)].addr) != 0) + if (fseek(file->file, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0) + yyerrorf("Couldn't seek to offset %llu in \"%s\": %s", + (unsigned long long)(yyvsp[(6) - (9)].addr), + (yyvsp[(4) - (9)].data).val, strerror(errno)); + + d = data_copy_file(file->file, (yyvsp[(8) - (9)].addr)); + + (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d); + dtc_close_file(file); + ;} + break; + + case 24: +#line 221 "dtc-parser.y" + { + struct search_path path = { srcpos_file->dir, NULL, NULL }; + struct dtc_file *file = dtc_open_file((yyvsp[(4) - (5)].data).val, &path); + struct data d = empty_data; + + d = data_copy_file(file->file, -1); + + (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d); + dtc_close_file(file); + ;} + break; + + case 25: +#line 232 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 26: +#line 239 "dtc-parser.y" + { + (yyval.data) = empty_data; + ;} + break; + + case 27: +#line 243 "dtc-parser.y" + { + (yyval.data) = (yyvsp[(1) - (2)].data); + ;} + break; + + case 28: +#line 247 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 29: +#line 254 "dtc-parser.y" + { + (yyval.data) = empty_data; + ;} + break; + + case 30: +#line 258 "dtc-parser.y" + { + (yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell)); + ;} + break; + + case 31: +#line 262 "dtc-parser.y" + { + (yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE, + (yyvsp[(2) - (2)].labelref)), -1); + ;} + break; + + case 32: +#line 267 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 33: +#line 274 "dtc-parser.y" + { + (yyval.cbase) = 16; + ;} + break; + + case 35: +#line 282 "dtc-parser.y" + { + (yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32); + ;} + break; + + case 36: +#line 286 "dtc-parser.y" + { + (yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32); + ;} + break; + + case 37: +#line 293 "dtc-parser.y" + { + (yyval.data) = empty_data; + ;} + break; + + case 38: +#line 297 "dtc-parser.y" + { + (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte)); + ;} + break; + + case 39: +#line 301 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 40: +#line 308 "dtc-parser.y" + { + (yyval.nodelist) = NULL; + ;} + break; + + case 41: +#line 312 "dtc-parser.y" + { + (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist)); + ;} + break; + + case 42: +#line 316 "dtc-parser.y" + { + yyerror("syntax error: properties must precede subnodes"); + YYERROR; + ;} + break; + + case 43: +#line 324 "dtc-parser.y" + { + (yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref)); + ;} + break; + + case 44: +#line 331 "dtc-parser.y" + { + (yyval.labelref) = NULL; + ;} + break; + + case 45: +#line 335 "dtc-parser.y" + { + (yyval.labelref) = (yyvsp[(1) - (1)].labelref); + ;} + break; + + +/* Line 1267 of yacc.c. */ +#line 1780 "dtc-parser.tab.c" + default: break; + } + YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); + + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + + *++yyvsp = yyval; + *++yylsp = yyloc; + + /* Now `shift' the result of the reduction. Determine what state + that goes to, based on the state we popped back to and the rule + number reduced by. */ + + yyn = yyr1[yyn]; + + yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; + if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) + yystate = yytable[yystate]; + else + yystate = yydefgoto[yyn - YYNTOKENS]; + + goto yynewstate; + + +/*------------------------------------. +| yyerrlab -- here on detecting error | +`------------------------------------*/ +yyerrlab: + /* If not already recovering from an error, report this error. */ + if (!yyerrstatus) + { + ++yynerrs; +#if ! YYERROR_VERBOSE + yyerror (YY_("syntax error")); +#else + { + YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); + if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) + { + YYSIZE_T yyalloc = 2 * yysize; + if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) + yyalloc = YYSTACK_ALLOC_MAXIMUM; + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); + yymsg = (char *) YYSTACK_ALLOC (yyalloc); + if (yymsg) + yymsg_alloc = yyalloc; + else + { + yymsg = yymsgbuf; + yymsg_alloc = sizeof yymsgbuf; + } + } + + if (0 < yysize && yysize <= yymsg_alloc) + { + (void) yysyntax_error (yymsg, yystate, yychar); + yyerror (yymsg); + } + else + { + yyerror (YY_("syntax error")); + if (yysize != 0) + goto yyexhaustedlab; + } + } +#endif + } + + yyerror_range[0] = yylloc; + + if (yyerrstatus == 3) + { + /* If just tried and failed to reuse look-ahead token after an + error, discard it. */ + + if (yychar <= YYEOF) + { + /* Return failure if at end of input. */ + if (yychar == YYEOF) + YYABORT; + } + else + { + yydestruct ("Error: discarding", + yytoken, &yylval, &yylloc); + yychar = YYEMPTY; + } + } + + /* Else will try to reuse look-ahead token after shifting the error + token. */ + goto yyerrlab1; + + +/*---------------------------------------------------. +| yyerrorlab -- error raised explicitly by YYERROR. | +`---------------------------------------------------*/ +yyerrorlab: + + /* Pacify compilers like GCC when the user code never invokes + YYERROR and the label yyerrorlab therefore never appears in user + code. */ + if (/*CONSTCOND*/ 0) + goto yyerrorlab; + + yyerror_range[0] = yylsp[1-yylen]; + /* Do not reclaim the symbols of the rule which action triggered + this YYERROR. */ + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + yystate = *yyssp; + goto yyerrlab1; + + +/*-------------------------------------------------------------. +| yyerrlab1 -- common code for both syntax error and YYERROR. | +`-------------------------------------------------------------*/ +yyerrlab1: + yyerrstatus = 3; /* Each real token shifted decrements this. */ + + for (;;) + { + yyn = yypact[yystate]; + if (yyn != YYPACT_NINF) + { + yyn += YYTERROR; + if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) + { + yyn = yytable[yyn]; + if (0 < yyn) + break; + } + } + + /* Pop the current state because it cannot handle the error token. */ + if (yyssp == yyss) + YYABORT; + + yyerror_range[0] = *yylsp; + yydestruct ("Error: popping", + yystos[yystate], yyvsp, yylsp); + YYPOPSTACK (1); + yystate = *yyssp; + YY_STACK_PRINT (yyss, yyssp); + } + + if (yyn == YYFINAL) + YYACCEPT; + + *++yyvsp = yylval; + + yyerror_range[1] = yylloc; + /* Using YYLLOC is tempting, but would change the location of + the look-ahead. YYLOC is available though. */ + YYLLOC_DEFAULT (yyloc, (yyerror_range - 1), 2); + *++yylsp = yyloc; + + /* Shift the error token. */ + YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); + + yystate = yyn; + goto yynewstate; + + +/*-------------------------------------. +| yyacceptlab -- YYACCEPT comes here. | +`-------------------------------------*/ +yyacceptlab: + yyresult = 0; + goto yyreturn; + +/*-----------------------------------. +| yyabortlab -- YYABORT comes here. | +`-----------------------------------*/ +yyabortlab: + yyresult = 1; + goto yyreturn; + +#ifndef yyoverflow +/*-------------------------------------------------. +| yyexhaustedlab -- memory exhaustion comes here. | +`-------------------------------------------------*/ +yyexhaustedlab: + yyerror (YY_("memory exhausted")); + yyresult = 2; + /* Fall through. */ +#endif + +yyreturn: + if (yychar != YYEOF && yychar != YYEMPTY) + yydestruct ("Cleanup: discarding lookahead", + yytoken, &yylval, &yylloc); + /* Do not reclaim the symbols of the rule which action triggered + this YYABORT or YYACCEPT. */ + YYPOPSTACK (yylen); + YY_STACK_PRINT (yyss, yyssp); + while (yyssp != yyss) + { + yydestruct ("Cleanup: popping", + yystos[*yyssp], yyvsp, yylsp); + YYPOPSTACK (1); + } +#ifndef yyoverflow + if (yyss != yyssa) + YYSTACK_FREE (yyss); +#endif +#if YYERROR_VERBOSE + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); +#endif + /* Make sure YYID is used. */ + return YYID (yyresult); +} + + +#line 340 "dtc-parser.y" + + +void yyerrorf(char const *s, ...) +{ + const char *fname = srcpos_file ? srcpos_file->name : ""; + va_list va; + va_start(va, s); + + if (strcmp(fname, "-") == 0) + fname = "stdin"; + + fprintf(stderr, "%s:%d ", fname, yylloc.first_line); + vfprintf(stderr, s, va); + fprintf(stderr, "\n"); + + treesource_error = 1; + va_end(va); +} + +void yyerror (char const *s) +{ + yyerrorf("%s", s); +} + +static unsigned long long eval_literal(const char *s, int base, int bits) +{ + unsigned long long val; + char *e; + + errno = 0; + val = strtoull(s, &e, base); + if (*e) + yyerror("bad characters in literal"); + else if ((errno == ERANGE) + || ((bits < 64) && (val >= (1ULL << bits)))) + yyerror("literal out of range"); + else if (errno != 0) + yyerror("bad literal"); + return val; +} + diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/dtc-parser.tab.h_shipped linux-2.6.30-rc4-git/scripts/dtc/dtc-parser.tab.h_shipped --- linux-2.6.30-rc4/scripts/dtc/dtc-parser.tab.h_shipped 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/dtc-parser.tab.h_shipped 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,113 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton interface for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + DT_V1 = 258, + DT_MEMRESERVE = 259, + DT_PROPNODENAME = 260, + DT_LITERAL = 261, + DT_LEGACYLITERAL = 262, + DT_BASE = 263, + DT_BYTE = 264, + DT_STRING = 265, + DT_LABEL = 266, + DT_REF = 267, + DT_INCBIN = 268 + }; +#endif +/* Tokens. */ +#define DT_V1 258 +#define DT_MEMRESERVE 259 +#define DT_PROPNODENAME 260 +#define DT_LITERAL 261 +#define DT_LEGACYLITERAL 262 +#define DT_BASE 263 +#define DT_BYTE 264 +#define DT_STRING 265 +#define DT_LABEL 266 +#define DT_REF 267 +#define DT_INCBIN 268 + + + + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 37 "dtc-parser.y" +{ + char *propnodename; + char *literal; + char *labelref; + unsigned int cbase; + uint8_t byte; + struct data data; + + uint64_t addr; + cell_t cell; + struct property *prop; + struct property *proplist; + struct node *node; + struct node *nodelist; + struct reserve_info *re; +} +/* Line 1489 of yacc.c. */ +#line 92 "dtc-parser.tab.h" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + +extern YYSTYPE yylval; + +#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED +typedef struct YYLTYPE +{ + int first_line; + int first_column; + int last_line; + int last_column; +} YYLTYPE; +# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ +# define YYLTYPE_IS_DECLARED 1 +# define YYLTYPE_IS_TRIVIAL 1 +#endif + +extern YYLTYPE yylloc; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/dtc-parser.y linux-2.6.30-rc4-git/scripts/dtc/dtc-parser.y --- linux-2.6.30-rc4/scripts/dtc/dtc-parser.y 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/dtc-parser.y 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,379 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +%locations + +%{ +#include + +#include "dtc.h" +#include "srcpos.h" + +extern int yylex(void); + +extern struct boot_info *the_boot_info; +extern int treesource_error; + +static unsigned long long eval_literal(const char *s, int base, int bits); +%} + +%union { + char *propnodename; + char *literal; + char *labelref; + unsigned int cbase; + uint8_t byte; + struct data data; + + uint64_t addr; + cell_t cell; + struct property *prop; + struct property *proplist; + struct node *node; + struct node *nodelist; + struct reserve_info *re; +} + +%token DT_V1 +%token DT_MEMRESERVE +%token DT_PROPNODENAME +%token DT_LITERAL +%token DT_LEGACYLITERAL +%token DT_BASE +%token DT_BYTE +%token DT_STRING +%token DT_LABEL +%token DT_REF +%token DT_INCBIN + +%type propdata +%type propdataprefix +%type memreserve +%type memreserves +%type v0_memreserve +%type v0_memreserves +%type addr +%type celllist +%type cellbase +%type cellval +%type bytestring +%type propdef +%type proplist + +%type devicetree +%type nodedef +%type subnode +%type subnodes +%type label + +%% + +sourcefile: + DT_V1 ';' memreserves devicetree + { + the_boot_info = build_boot_info($3, $4, 0); + } + | v0_memreserves devicetree + { + the_boot_info = build_boot_info($1, $2, 0); + } + ; + +memreserves: + /* empty */ + { + $$ = NULL; + } + | memreserve memreserves + { + $$ = chain_reserve_entry($1, $2); + } + ; + +memreserve: + label DT_MEMRESERVE addr addr ';' + { + $$ = build_reserve_entry($3, $4, $1); + } + ; + +v0_memreserves: + /* empty */ + { + $$ = NULL; + } + | v0_memreserve v0_memreserves + { + $$ = chain_reserve_entry($1, $2); + }; + ; + +v0_memreserve: + memreserve + { + $$ = $1; + } + | label DT_MEMRESERVE addr '-' addr ';' + { + $$ = build_reserve_entry($3, $5 - $3 + 1, $1); + } + ; + +addr: + DT_LITERAL + { + $$ = eval_literal($1, 0, 64); + } + | DT_LEGACYLITERAL + { + $$ = eval_literal($1, 16, 64); + } + ; + +devicetree: + '/' nodedef + { + $$ = name_node($2, "", NULL); + } + ; + +nodedef: + '{' proplist subnodes '}' ';' + { + $$ = build_node($2, $3); + } + ; + +proplist: + /* empty */ + { + $$ = NULL; + } + | proplist propdef + { + $$ = chain_property($2, $1); + } + ; + +propdef: + label DT_PROPNODENAME '=' propdata ';' + { + $$ = build_property($2, $4, $1); + } + | label DT_PROPNODENAME ';' + { + $$ = build_property($2, empty_data, $1); + } + ; + +propdata: + propdataprefix DT_STRING + { + $$ = data_merge($1, $2); + } + | propdataprefix '<' celllist '>' + { + $$ = data_merge($1, $3); + } + | propdataprefix '[' bytestring ']' + { + $$ = data_merge($1, $3); + } + | propdataprefix DT_REF + { + $$ = data_add_marker($1, REF_PATH, $2); + } + | propdataprefix DT_INCBIN '(' DT_STRING ',' addr ',' addr ')' + { + struct search_path path = { srcpos_file->dir, NULL, NULL }; + struct dtc_file *file = dtc_open_file($4.val, &path); + struct data d = empty_data; + + if ($6 != 0) + if (fseek(file->file, $6, SEEK_SET) != 0) + yyerrorf("Couldn't seek to offset %llu in \"%s\": %s", + (unsigned long long)$6, + $4.val, strerror(errno)); + + d = data_copy_file(file->file, $8); + + $$ = data_merge($1, d); + dtc_close_file(file); + } + | propdataprefix DT_INCBIN '(' DT_STRING ')' + { + struct search_path path = { srcpos_file->dir, NULL, NULL }; + struct dtc_file *file = dtc_open_file($4.val, &path); + struct data d = empty_data; + + d = data_copy_file(file->file, -1); + + $$ = data_merge($1, d); + dtc_close_file(file); + } + | propdata DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +propdataprefix: + /* empty */ + { + $$ = empty_data; + } + | propdata ',' + { + $$ = $1; + } + | propdataprefix DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +celllist: + /* empty */ + { + $$ = empty_data; + } + | celllist cellval + { + $$ = data_append_cell($1, $2); + } + | celllist DT_REF + { + $$ = data_append_cell(data_add_marker($1, REF_PHANDLE, + $2), -1); + } + | celllist DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +cellbase: + /* empty */ + { + $$ = 16; + } + | DT_BASE + ; + +cellval: + DT_LITERAL + { + $$ = eval_literal($1, 0, 32); + } + | cellbase DT_LEGACYLITERAL + { + $$ = eval_literal($2, $1, 32); + } + ; + +bytestring: + /* empty */ + { + $$ = empty_data; + } + | bytestring DT_BYTE + { + $$ = data_append_byte($1, $2); + } + | bytestring DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +subnodes: + /* empty */ + { + $$ = NULL; + } + | subnode subnodes + { + $$ = chain_node($1, $2); + } + | subnode propdef + { + yyerror("syntax error: properties must precede subnodes"); + YYERROR; + } + ; + +subnode: + label DT_PROPNODENAME nodedef + { + $$ = name_node($3, $2, $1); + } + ; + +label: + /* empty */ + { + $$ = NULL; + } + | DT_LABEL + { + $$ = $1; + } + ; + +%% + +void yyerrorf(char const *s, ...) +{ + const char *fname = srcpos_file ? srcpos_file->name : ""; + va_list va; + va_start(va, s); + + if (strcmp(fname, "-") == 0) + fname = "stdin"; + + fprintf(stderr, "%s:%d ", fname, yylloc.first_line); + vfprintf(stderr, s, va); + fprintf(stderr, "\n"); + + treesource_error = 1; + va_end(va); +} + +void yyerror (char const *s) +{ + yyerrorf("%s", s); +} + +static unsigned long long eval_literal(const char *s, int base, int bits) +{ + unsigned long long val; + char *e; + + errno = 0; + val = strtoull(s, &e, base); + if (*e) + yyerror("bad characters in literal"); + else if ((errno == ERANGE) + || ((bits < 64) && (val >= (1ULL << bits)))) + yyerror("literal out of range"); + else if (errno != 0) + yyerror("bad literal"); + return val; +} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/flattree.c linux-2.6.30-rc4-git/scripts/dtc/flattree.c --- linux-2.6.30-rc4/scripts/dtc/flattree.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/flattree.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,906 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" +#include "srcpos.h" + +#define FTF_FULLPATH 0x1 +#define FTF_VARALIGN 0x2 +#define FTF_NAMEPROPS 0x4 +#define FTF_BOOTCPUID 0x8 +#define FTF_STRTABSIZE 0x10 +#define FTF_STRUCTSIZE 0x20 +#define FTF_NOPS 0x40 + +static struct version_info { + int version; + int last_comp_version; + int hdr_size; + int flags; +} version_table[] = { + {1, 1, FDT_V1_SIZE, + FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS}, + {2, 1, FDT_V2_SIZE, + FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID}, + {3, 1, FDT_V3_SIZE, + FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID|FTF_STRTABSIZE}, + {16, 16, FDT_V3_SIZE, + FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_NOPS}, + {17, 16, FDT_V17_SIZE, + FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_STRUCTSIZE|FTF_NOPS}, +}; + +struct emitter { + void (*cell)(void *, cell_t); + void (*string)(void *, char *, int); + void (*align)(void *, int); + void (*data)(void *, struct data); + void (*beginnode)(void *, const char *); + void (*endnode)(void *, const char *); + void (*property)(void *, const char *); +}; + +static void bin_emit_cell(void *e, cell_t val) +{ + struct data *dtbuf = e; + + *dtbuf = data_append_cell(*dtbuf, val); +} + +static void bin_emit_string(void *e, char *str, int len) +{ + struct data *dtbuf = e; + + if (len == 0) + len = strlen(str); + + *dtbuf = data_append_data(*dtbuf, str, len); + *dtbuf = data_append_byte(*dtbuf, '\0'); +} + +static void bin_emit_align(void *e, int a) +{ + struct data *dtbuf = e; + + *dtbuf = data_append_align(*dtbuf, a); +} + +static void bin_emit_data(void *e, struct data d) +{ + struct data *dtbuf = e; + + *dtbuf = data_append_data(*dtbuf, d.val, d.len); +} + +static void bin_emit_beginnode(void *e, const char *label) +{ + bin_emit_cell(e, FDT_BEGIN_NODE); +} + +static void bin_emit_endnode(void *e, const char *label) +{ + bin_emit_cell(e, FDT_END_NODE); +} + +static void bin_emit_property(void *e, const char *label) +{ + bin_emit_cell(e, FDT_PROP); +} + +static struct emitter bin_emitter = { + .cell = bin_emit_cell, + .string = bin_emit_string, + .align = bin_emit_align, + .data = bin_emit_data, + .beginnode = bin_emit_beginnode, + .endnode = bin_emit_endnode, + .property = bin_emit_property, +}; + +static void emit_label(FILE *f, const char *prefix, const char *label) +{ + fprintf(f, "\t.globl\t%s_%s\n", prefix, label); + fprintf(f, "%s_%s:\n", prefix, label); + fprintf(f, "_%s_%s:\n", prefix, label); +} + +static void emit_offset_label(FILE *f, const char *label, int offset) +{ + fprintf(f, "\t.globl\t%s\n", label); + fprintf(f, "%s\t= . + %d\n", label, offset); +} + +static void asm_emit_cell(void *e, cell_t val) +{ + FILE *f = e; + + fprintf(f, "\t.long\t0x%x\n", val); +} + +static void asm_emit_string(void *e, char *str, int len) +{ + FILE *f = e; + char c = 0; + + if (len != 0) { + /* XXX: ewww */ + c = str[len]; + str[len] = '\0'; + } + + fprintf(f, "\t.string\t\"%s\"\n", str); + + if (len != 0) { + str[len] = c; + } +} + +static void asm_emit_align(void *e, int a) +{ + FILE *f = e; + + fprintf(f, "\t.balign\t%d\n", a); +} + +static void asm_emit_data(void *e, struct data d) +{ + FILE *f = e; + int off = 0; + struct marker *m = d.markers; + + for_each_marker_of_type(m, LABEL) + emit_offset_label(f, m->ref, m->offset); + + while ((d.len - off) >= sizeof(uint32_t)) { + fprintf(f, "\t.long\t0x%x\n", + fdt32_to_cpu(*((uint32_t *)(d.val+off)))); + off += sizeof(uint32_t); + } + + while ((d.len - off) >= 1) { + fprintf(f, "\t.byte\t0x%hhx\n", d.val[off]); + off += 1; + } + + assert(off == d.len); +} + +static void asm_emit_beginnode(void *e, const char *label) +{ + FILE *f = e; + + if (label) { + fprintf(f, "\t.globl\t%s\n", label); + fprintf(f, "%s:\n", label); + } + fprintf(f, "\t.long\tFDT_BEGIN_NODE\n"); +} + +static void asm_emit_endnode(void *e, const char *label) +{ + FILE *f = e; + + fprintf(f, "\t.long\tFDT_END_NODE\n"); + if (label) { + fprintf(f, "\t.globl\t%s_end\n", label); + fprintf(f, "%s_end:\n", label); + } +} + +static void asm_emit_property(void *e, const char *label) +{ + FILE *f = e; + + if (label) { + fprintf(f, "\t.globl\t%s\n", label); + fprintf(f, "%s:\n", label); + } + fprintf(f, "\t.long\tFDT_PROP\n"); +} + +static struct emitter asm_emitter = { + .cell = asm_emit_cell, + .string = asm_emit_string, + .align = asm_emit_align, + .data = asm_emit_data, + .beginnode = asm_emit_beginnode, + .endnode = asm_emit_endnode, + .property = asm_emit_property, +}; + +static int stringtable_insert(struct data *d, const char *str) +{ + int i; + + /* FIXME: do this more efficiently? */ + + for (i = 0; i < d->len; i++) { + if (streq(str, d->val + i)) + return i; + } + + *d = data_append_data(*d, str, strlen(str)+1); + return i; +} + +static void flatten_tree(struct node *tree, struct emitter *emit, + void *etarget, struct data *strbuf, + struct version_info *vi) +{ + struct property *prop; + struct node *child; + int seen_name_prop = 0; + + emit->beginnode(etarget, tree->label); + + if (vi->flags & FTF_FULLPATH) + emit->string(etarget, tree->fullpath, 0); + else + emit->string(etarget, tree->name, 0); + + emit->align(etarget, sizeof(cell_t)); + + for_each_property(tree, prop) { + int nameoff; + + if (streq(prop->name, "name")) + seen_name_prop = 1; + + nameoff = stringtable_insert(strbuf, prop->name); + + emit->property(etarget, prop->label); + emit->cell(etarget, prop->val.len); + emit->cell(etarget, nameoff); + + if ((vi->flags & FTF_VARALIGN) && (prop->val.len >= 8)) + emit->align(etarget, 8); + + emit->data(etarget, prop->val); + emit->align(etarget, sizeof(cell_t)); + } + + if ((vi->flags & FTF_NAMEPROPS) && !seen_name_prop) { + emit->property(etarget, NULL); + emit->cell(etarget, tree->basenamelen+1); + emit->cell(etarget, stringtable_insert(strbuf, "name")); + + if ((vi->flags & FTF_VARALIGN) && ((tree->basenamelen+1) >= 8)) + emit->align(etarget, 8); + + emit->string(etarget, tree->name, tree->basenamelen); + emit->align(etarget, sizeof(cell_t)); + } + + for_each_child(tree, child) { + flatten_tree(child, emit, etarget, strbuf, vi); + } + + emit->endnode(etarget, tree->label); +} + +static struct data flatten_reserve_list(struct reserve_info *reservelist, + struct version_info *vi) +{ + struct reserve_info *re; + struct data d = empty_data; + static struct fdt_reserve_entry null_re = {0,0}; + int j; + + for (re = reservelist; re; re = re->next) { + d = data_append_re(d, &re->re); + } + /* + * Add additional reserved slots if the user asked for them. + */ + for (j = 0; j < reservenum; j++) { + d = data_append_re(d, &null_re); + } + + return d; +} + +static void make_fdt_header(struct fdt_header *fdt, + struct version_info *vi, + int reservesize, int dtsize, int strsize, + int boot_cpuid_phys) +{ + int reserve_off; + + reservesize += sizeof(struct fdt_reserve_entry); + + memset(fdt, 0xff, sizeof(*fdt)); + + fdt->magic = cpu_to_fdt32(FDT_MAGIC); + fdt->version = cpu_to_fdt32(vi->version); + fdt->last_comp_version = cpu_to_fdt32(vi->last_comp_version); + + /* Reserve map should be doubleword aligned */ + reserve_off = ALIGN(vi->hdr_size, 8); + + fdt->off_mem_rsvmap = cpu_to_fdt32(reserve_off); + fdt->off_dt_struct = cpu_to_fdt32(reserve_off + reservesize); + fdt->off_dt_strings = cpu_to_fdt32(reserve_off + reservesize + + dtsize); + fdt->totalsize = cpu_to_fdt32(reserve_off + reservesize + dtsize + strsize); + + if (vi->flags & FTF_BOOTCPUID) + fdt->boot_cpuid_phys = cpu_to_fdt32(boot_cpuid_phys); + if (vi->flags & FTF_STRTABSIZE) + fdt->size_dt_strings = cpu_to_fdt32(strsize); + if (vi->flags & FTF_STRUCTSIZE) + fdt->size_dt_struct = cpu_to_fdt32(dtsize); +} + +void dt_to_blob(FILE *f, struct boot_info *bi, int version) +{ + struct version_info *vi = NULL; + int i; + struct data blob = empty_data; + struct data reservebuf = empty_data; + struct data dtbuf = empty_data; + struct data strbuf = empty_data; + struct fdt_header fdt; + int padlen = 0; + + for (i = 0; i < ARRAY_SIZE(version_table); i++) { + if (version_table[i].version == version) + vi = &version_table[i]; + } + if (!vi) + die("Unknown device tree blob version %d\n", version); + + flatten_tree(bi->dt, &bin_emitter, &dtbuf, &strbuf, vi); + bin_emit_cell(&dtbuf, FDT_END); + + reservebuf = flatten_reserve_list(bi->reservelist, vi); + + /* Make header */ + make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len, + bi->boot_cpuid_phys); + + /* + * If the user asked for more space than is used, adjust the totalsize. + */ + if (minsize > 0) { + padlen = minsize - fdt32_to_cpu(fdt.totalsize); + if ((padlen < 0) && (quiet < 1)) + fprintf(stderr, + "Warning: blob size %d >= minimum size %d\n", + fdt32_to_cpu(fdt.totalsize), minsize); + } + + if (padsize > 0) + padlen = padsize; + + if (padlen > 0) { + int tsize = fdt32_to_cpu(fdt.totalsize); + tsize += padlen; + fdt.totalsize = cpu_to_fdt32(tsize); + } + + /* + * Assemble the blob: start with the header, add with alignment + * the reserve buffer, add the reserve map terminating zeroes, + * the device tree itself, and finally the strings. + */ + blob = data_append_data(blob, &fdt, vi->hdr_size); + blob = data_append_align(blob, 8); + blob = data_merge(blob, reservebuf); + blob = data_append_zeroes(blob, sizeof(struct fdt_reserve_entry)); + blob = data_merge(blob, dtbuf); + blob = data_merge(blob, strbuf); + + /* + * If the user asked for more space than is used, pad out the blob. + */ + if (padlen > 0) + blob = data_append_zeroes(blob, padlen); + + fwrite(blob.val, blob.len, 1, f); + + if (ferror(f)) + die("Error writing device tree blob: %s\n", strerror(errno)); + + /* + * data_merge() frees the right-hand element so only the blob + * remains to be freed. + */ + data_free(blob); +} + +static void dump_stringtable_asm(FILE *f, struct data strbuf) +{ + const char *p; + int len; + + p = strbuf.val; + + while (p < (strbuf.val + strbuf.len)) { + len = strlen(p); + fprintf(f, "\t.string \"%s\"\n", p); + p += len+1; + } +} + +void dt_to_asm(FILE *f, struct boot_info *bi, int version) +{ + struct version_info *vi = NULL; + int i; + struct data strbuf = empty_data; + struct reserve_info *re; + const char *symprefix = "dt"; + + for (i = 0; i < ARRAY_SIZE(version_table); i++) { + if (version_table[i].version == version) + vi = &version_table[i]; + } + if (!vi) + die("Unknown device tree blob version %d\n", version); + + fprintf(f, "/* autogenerated by dtc, do not edit */\n\n"); + fprintf(f, "#define FDT_MAGIC 0x%x\n", FDT_MAGIC); + fprintf(f, "#define FDT_BEGIN_NODE 0x%x\n", FDT_BEGIN_NODE); + fprintf(f, "#define FDT_END_NODE 0x%x\n", FDT_END_NODE); + fprintf(f, "#define FDT_PROP 0x%x\n", FDT_PROP); + fprintf(f, "#define FDT_END 0x%x\n", FDT_END); + fprintf(f, "\n"); + + emit_label(f, symprefix, "blob_start"); + emit_label(f, symprefix, "header"); + fprintf(f, "\t.long\tFDT_MAGIC\t\t\t\t/* magic */\n"); + fprintf(f, "\t.long\t_%s_blob_abs_end - _%s_blob_start\t/* totalsize */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t_%s_struct_start - _%s_blob_start\t/* off_dt_struct */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t_%s_strings_start - _%s_blob_start\t/* off_dt_strings */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t_%s_reserve_map - _%s_blob_start\t/* off_dt_strings */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t%d\t\t\t\t\t/* version */\n", vi->version); + fprintf(f, "\t.long\t%d\t\t\t\t\t/* last_comp_version */\n", + vi->last_comp_version); + + if (vi->flags & FTF_BOOTCPUID) + fprintf(f, "\t.long\t%i\t\t\t\t\t/* boot_cpuid_phys */\n", + bi->boot_cpuid_phys); + + if (vi->flags & FTF_STRTABSIZE) + fprintf(f, "\t.long\t_%s_strings_end - _%s_strings_start\t/* size_dt_strings */\n", + symprefix, symprefix); + + if (vi->flags & FTF_STRUCTSIZE) + fprintf(f, "\t.long\t_%s_struct_end - _%s_struct_start\t/* size_dt_struct */\n", + symprefix, symprefix); + + /* + * Reserve map entries. + * Align the reserve map to a doubleword boundary. + * Each entry is an (address, size) pair of u64 values. + * Always supply a zero-sized temination entry. + */ + asm_emit_align(f, 8); + emit_label(f, symprefix, "reserve_map"); + + fprintf(f, "/* Memory reserve map from source file */\n"); + + /* + * Use .long on high and low halfs of u64s to avoid .quad + * as it appears .quad isn't available in some assemblers. + */ + for (re = bi->reservelist; re; re = re->next) { + if (re->label) { + fprintf(f, "\t.globl\t%s\n", re->label); + fprintf(f, "%s:\n", re->label); + } + fprintf(f, "\t.long\t0x%08x, 0x%08x\n", + (unsigned int)(re->re.address >> 32), + (unsigned int)(re->re.address & 0xffffffff)); + fprintf(f, "\t.long\t0x%08x, 0x%08x\n", + (unsigned int)(re->re.size >> 32), + (unsigned int)(re->re.size & 0xffffffff)); + } + for (i = 0; i < reservenum; i++) { + fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); + } + + fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); + + emit_label(f, symprefix, "struct_start"); + flatten_tree(bi->dt, &asm_emitter, f, &strbuf, vi); + fprintf(f, "\t.long\tFDT_END\n"); + emit_label(f, symprefix, "struct_end"); + + emit_label(f, symprefix, "strings_start"); + dump_stringtable_asm(f, strbuf); + emit_label(f, symprefix, "strings_end"); + + emit_label(f, symprefix, "blob_end"); + + /* + * If the user asked for more space than is used, pad it out. + */ + if (minsize > 0) { + fprintf(f, "\t.space\t%d - (_%s_blob_end - _%s_blob_start), 0\n", + minsize, symprefix, symprefix); + } + if (padsize > 0) { + fprintf(f, "\t.space\t%d, 0\n", padsize); + } + emit_label(f, symprefix, "blob_abs_end"); + + data_free(strbuf); +} + +struct inbuf { + char *base, *limit, *ptr; +}; + +static void inbuf_init(struct inbuf *inb, void *base, void *limit) +{ + inb->base = base; + inb->limit = limit; + inb->ptr = inb->base; +} + +static void flat_read_chunk(struct inbuf *inb, void *p, int len) +{ + if ((inb->ptr + len) > inb->limit) + die("Premature end of data parsing flat device tree\n"); + + memcpy(p, inb->ptr, len); + + inb->ptr += len; +} + +static uint32_t flat_read_word(struct inbuf *inb) +{ + uint32_t val; + + assert(((inb->ptr - inb->base) % sizeof(val)) == 0); + + flat_read_chunk(inb, &val, sizeof(val)); + + return fdt32_to_cpu(val); +} + +static void flat_realign(struct inbuf *inb, int align) +{ + int off = inb->ptr - inb->base; + + inb->ptr = inb->base + ALIGN(off, align); + if (inb->ptr > inb->limit) + die("Premature end of data parsing flat device tree\n"); +} + +static char *flat_read_string(struct inbuf *inb) +{ + int len = 0; + const char *p = inb->ptr; + char *str; + + do { + if (p >= inb->limit) + die("Premature end of data parsing flat device tree\n"); + len++; + } while ((*p++) != '\0'); + + str = strdup(inb->ptr); + + inb->ptr += len; + + flat_realign(inb, sizeof(uint32_t)); + + return str; +} + +static struct data flat_read_data(struct inbuf *inb, int len) +{ + struct data d = empty_data; + + if (len == 0) + return empty_data; + + d = data_grow_for(d, len); + d.len = len; + + flat_read_chunk(inb, d.val, len); + + flat_realign(inb, sizeof(uint32_t)); + + return d; +} + +static char *flat_read_stringtable(struct inbuf *inb, int offset) +{ + const char *p; + + p = inb->base + offset; + while (1) { + if (p >= inb->limit || p < inb->base) + die("String offset %d overruns string table\n", + offset); + + if (*p == '\0') + break; + + p++; + } + + return strdup(inb->base + offset); +} + +static struct property *flat_read_property(struct inbuf *dtbuf, + struct inbuf *strbuf, int flags) +{ + uint32_t proplen, stroff; + char *name; + struct data val; + + proplen = flat_read_word(dtbuf); + stroff = flat_read_word(dtbuf); + + name = flat_read_stringtable(strbuf, stroff); + + if ((flags & FTF_VARALIGN) && (proplen >= 8)) + flat_realign(dtbuf, 8); + + val = flat_read_data(dtbuf, proplen); + + return build_property(name, val, NULL); +} + + +static struct reserve_info *flat_read_mem_reserve(struct inbuf *inb) +{ + struct reserve_info *reservelist = NULL; + struct reserve_info *new; + const char *p; + struct fdt_reserve_entry re; + + /* + * Each entry is a pair of u64 (addr, size) values for 4 cell_t's. + * List terminates at an entry with size equal to zero. + * + * First pass, count entries. + */ + p = inb->ptr; + while (1) { + flat_read_chunk(inb, &re, sizeof(re)); + re.address = fdt64_to_cpu(re.address); + re.size = fdt64_to_cpu(re.size); + if (re.size == 0) + break; + + new = build_reserve_entry(re.address, re.size, NULL); + reservelist = add_reserve_entry(reservelist, new); + } + + return reservelist; +} + + +static char *nodename_from_path(const char *ppath, const char *cpath) +{ + int plen; + + plen = strlen(ppath); + + if (!strneq(ppath, cpath, plen)) + die("Path \"%s\" is not valid as a child of \"%s\"\n", + cpath, ppath); + + /* root node is a special case */ + if (!streq(ppath, "/")) + plen++; + + return strdup(cpath + plen); +} + +static struct node *unflatten_tree(struct inbuf *dtbuf, + struct inbuf *strbuf, + const char *parent_flatname, int flags) +{ + struct node *node; + char *flatname; + uint32_t val; + + node = build_node(NULL, NULL); + + flatname = flat_read_string(dtbuf); + + if (flags & FTF_FULLPATH) + node->name = nodename_from_path(parent_flatname, flatname); + else + node->name = flatname; + + do { + struct property *prop; + struct node *child; + + val = flat_read_word(dtbuf); + switch (val) { + case FDT_PROP: + if (node->children) + fprintf(stderr, "Warning: Flat tree input has " + "subnodes preceding a property.\n"); + prop = flat_read_property(dtbuf, strbuf, flags); + add_property(node, prop); + break; + + case FDT_BEGIN_NODE: + child = unflatten_tree(dtbuf,strbuf, flatname, flags); + add_child(node, child); + break; + + case FDT_END_NODE: + break; + + case FDT_END: + die("Premature FDT_END in device tree blob\n"); + break; + + case FDT_NOP: + if (!(flags & FTF_NOPS)) + fprintf(stderr, "Warning: NOP tag found in flat tree" + " version <16\n"); + + /* Ignore */ + break; + + default: + die("Invalid opcode word %08x in device tree blob\n", + val); + } + } while (val != FDT_END_NODE); + + return node; +} + + +struct boot_info *dt_from_blob(const char *fname) +{ + struct dtc_file *dtcf; + uint32_t magic, totalsize, version, size_dt, boot_cpuid_phys; + uint32_t off_dt, off_str, off_mem_rsvmap; + int rc; + char *blob; + struct fdt_header *fdt; + char *p; + struct inbuf dtbuf, strbuf; + struct inbuf memresvbuf; + int sizeleft; + struct reserve_info *reservelist; + struct node *tree; + uint32_t val; + int flags = 0; + + dtcf = dtc_open_file(fname, NULL); + + rc = fread(&magic, sizeof(magic), 1, dtcf->file); + if (ferror(dtcf->file)) + die("Error reading DT blob magic number: %s\n", + strerror(errno)); + if (rc < 1) { + if (feof(dtcf->file)) + die("EOF reading DT blob magic number\n"); + else + die("Mysterious short read reading magic number\n"); + } + + magic = fdt32_to_cpu(magic); + if (magic != FDT_MAGIC) + die("Blob has incorrect magic number\n"); + + rc = fread(&totalsize, sizeof(totalsize), 1, dtcf->file); + if (ferror(dtcf->file)) + die("Error reading DT blob size: %s\n", strerror(errno)); + if (rc < 1) { + if (feof(dtcf->file)) + die("EOF reading DT blob size\n"); + else + die("Mysterious short read reading blob size\n"); + } + + totalsize = fdt32_to_cpu(totalsize); + if (totalsize < FDT_V1_SIZE) + die("DT blob size (%d) is too small\n", totalsize); + + blob = xmalloc(totalsize); + + fdt = (struct fdt_header *)blob; + fdt->magic = cpu_to_fdt32(magic); + fdt->totalsize = cpu_to_fdt32(totalsize); + + sizeleft = totalsize - sizeof(magic) - sizeof(totalsize); + p = blob + sizeof(magic) + sizeof(totalsize); + + while (sizeleft) { + if (feof(dtcf->file)) + die("EOF before reading %d bytes of DT blob\n", + totalsize); + + rc = fread(p, 1, sizeleft, dtcf->file); + if (ferror(dtcf->file)) + die("Error reading DT blob: %s\n", + strerror(errno)); + + sizeleft -= rc; + p += rc; + } + + off_dt = fdt32_to_cpu(fdt->off_dt_struct); + off_str = fdt32_to_cpu(fdt->off_dt_strings); + off_mem_rsvmap = fdt32_to_cpu(fdt->off_mem_rsvmap); + version = fdt32_to_cpu(fdt->version); + boot_cpuid_phys = fdt32_to_cpu(fdt->boot_cpuid_phys); + + if (off_mem_rsvmap >= totalsize) + die("Mem Reserve structure offset exceeds total size\n"); + + if (off_dt >= totalsize) + die("DT structure offset exceeds total size\n"); + + if (off_str > totalsize) + die("String table offset exceeds total size\n"); + + if (version >= 3) { + uint32_t size_str = fdt32_to_cpu(fdt->size_dt_strings); + if (off_str+size_str > totalsize) + die("String table extends past total size\n"); + inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str); + } else { + inbuf_init(&strbuf, blob + off_str, blob + totalsize); + } + + if (version >= 17) { + size_dt = fdt32_to_cpu(fdt->size_dt_struct); + if (off_dt+size_dt > totalsize) + die("Structure block extends past total size\n"); + } + + if (version < 16) { + flags |= FTF_FULLPATH | FTF_NAMEPROPS | FTF_VARALIGN; + } else { + flags |= FTF_NOPS; + } + + inbuf_init(&memresvbuf, + blob + off_mem_rsvmap, blob + totalsize); + inbuf_init(&dtbuf, blob + off_dt, blob + totalsize); + + reservelist = flat_read_mem_reserve(&memresvbuf); + + val = flat_read_word(&dtbuf); + + if (val != FDT_BEGIN_NODE) + die("Device tree blob doesn't begin with FDT_BEGIN_NODE (begins with 0x%08x)\n", val); + + tree = unflatten_tree(&dtbuf, &strbuf, "", flags); + + val = flat_read_word(&dtbuf); + if (val != FDT_END) + die("Device tree blob doesn't end with FDT_END\n"); + + free(blob); + + dtc_close_file(dtcf); + + return build_boot_info(reservelist, tree, boot_cpuid_phys); +} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/fstree.c linux-2.6.30-rc4-git/scripts/dtc/fstree.c --- linux-2.6.30-rc4/scripts/dtc/fstree.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/fstree.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,92 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +#include +#include + +static struct node *read_fstree(const char *dirname) +{ + DIR *d; + struct dirent *de; + struct stat st; + struct node *tree; + + d = opendir(dirname); + if (!d) + die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno)); + + tree = build_node(NULL, NULL); + + while ((de = readdir(d)) != NULL) { + char *tmpnam; + + if (streq(de->d_name, ".") + || streq(de->d_name, "..")) + continue; + + tmpnam = join_path(dirname, de->d_name); + + if (lstat(tmpnam, &st) < 0) + die("stat(%s): %s\n", tmpnam, strerror(errno)); + + if (S_ISREG(st.st_mode)) { + struct property *prop; + FILE *pfile; + + pfile = fopen(tmpnam, "r"); + if (! pfile) { + fprintf(stderr, + "WARNING: Cannot open %s: %s\n", + tmpnam, strerror(errno)); + } else { + prop = build_property(strdup(de->d_name), + data_copy_file(pfile, + st.st_size), + NULL); + add_property(tree, prop); + fclose(pfile); + } + } else if (S_ISDIR(st.st_mode)) { + struct node *newchild; + + newchild = read_fstree(tmpnam); + newchild = name_node(newchild, strdup(de->d_name), + NULL); + add_child(tree, newchild); + } + + free(tmpnam); + } + + return tree; +} + +struct boot_info *dt_from_fs(const char *dirname) +{ + struct node *tree; + + tree = read_fstree(dirname); + tree = name_node(tree, "", NULL); + + return build_boot_info(NULL, tree, 0); +} + diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/libfdt/fdt.c linux-2.6.30-rc4-git/scripts/dtc/libfdt/fdt.c --- linux-2.6.30-rc4/scripts/dtc/libfdt/fdt.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/libfdt/fdt.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,201 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +int fdt_check_header(const void *fdt) +{ + if (fdt_magic(fdt) == FDT_MAGIC) { + /* Complete tree */ + if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION) + return -FDT_ERR_BADVERSION; + if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION) + return -FDT_ERR_BADVERSION; + } else if (fdt_magic(fdt) == FDT_SW_MAGIC) { + /* Unfinished sequential-write blob */ + if (fdt_size_dt_struct(fdt) == 0) + return -FDT_ERR_BADSTATE; + } else { + return -FDT_ERR_BADMAGIC; + } + + return 0; +} + +const void *fdt_offset_ptr(const void *fdt, int offset, int len) +{ + const char *p; + + if (fdt_version(fdt) >= 0x11) + if (((offset + len) < offset) + || ((offset + len) > fdt_size_dt_struct(fdt))) + return NULL; + + p = _fdt_offset_ptr(fdt, offset); + + if (p + len < p) + return NULL; + return p; +} + +uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset) +{ + const uint32_t *tagp, *lenp; + uint32_t tag; + const char *p; + + if (offset % FDT_TAGSIZE) + return -1; + + tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE); + if (! tagp) + return FDT_END; /* premature end */ + tag = fdt32_to_cpu(*tagp); + offset += FDT_TAGSIZE; + + switch (tag) { + case FDT_BEGIN_NODE: + /* skip name */ + do { + p = fdt_offset_ptr(fdt, offset++, 1); + } while (p && (*p != '\0')); + if (! p) + return FDT_END; + break; + case FDT_PROP: + lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp)); + if (! lenp) + return FDT_END; + /* skip name offset, length and value */ + offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp); + break; + } + + if (nextoffset) + *nextoffset = FDT_TAGALIGN(offset); + + return tag; +} + +int _fdt_check_node_offset(const void *fdt, int offset) +{ + if ((offset < 0) || (offset % FDT_TAGSIZE) + || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE)) + return -FDT_ERR_BADOFFSET; + + return offset; +} + +int fdt_next_node(const void *fdt, int offset, int *depth) +{ + int nextoffset = 0; + uint32_t tag; + + if (offset >= 0) + if ((nextoffset = _fdt_check_node_offset(fdt, offset)) < 0) + return nextoffset; + + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + + switch (tag) { + case FDT_PROP: + case FDT_NOP: + break; + + case FDT_BEGIN_NODE: + if (depth) + (*depth)++; + break; + + case FDT_END_NODE: + if (depth) + (*depth)--; + break; + + case FDT_END: + return -FDT_ERR_NOTFOUND; + + default: + return -FDT_ERR_BADSTRUCTURE; + } + } while (tag != FDT_BEGIN_NODE); + + return offset; +} + +const char *_fdt_find_string(const char *strtab, int tabsize, const char *s) +{ + int len = strlen(s) + 1; + const char *last = strtab + tabsize - len; + const char *p; + + for (p = strtab; p <= last; p++) + if (memcmp(p, s, len) == 0) + return p; + return NULL; +} + +int fdt_move(const void *fdt, void *buf, int bufsize) +{ + FDT_CHECK_HEADER(fdt); + + if (fdt_totalsize(fdt) > bufsize) + return -FDT_ERR_NOSPACE; + + memmove(buf, fdt, fdt_totalsize(fdt)); + return 0; +} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/libfdt/fdt.h linux-2.6.30-rc4-git/scripts/dtc/libfdt/fdt.h --- linux-2.6.30-rc4/scripts/dtc/libfdt/fdt.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/libfdt/fdt.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,60 @@ +#ifndef _FDT_H +#define _FDT_H + +#ifndef __ASSEMBLY__ + +struct fdt_header { + uint32_t magic; /* magic word FDT_MAGIC */ + uint32_t totalsize; /* total size of DT block */ + uint32_t off_dt_struct; /* offset to structure */ + uint32_t off_dt_strings; /* offset to strings */ + uint32_t off_mem_rsvmap; /* offset to memory reserve map */ + uint32_t version; /* format version */ + uint32_t last_comp_version; /* last compatible version */ + + /* version 2 fields below */ + uint32_t boot_cpuid_phys; /* Which physical CPU id we're + booting on */ + /* version 3 fields below */ + uint32_t size_dt_strings; /* size of the strings block */ + + /* version 17 fields below */ + uint32_t size_dt_struct; /* size of the structure block */ +}; + +struct fdt_reserve_entry { + uint64_t address; + uint64_t size; +}; + +struct fdt_node_header { + uint32_t tag; + char name[0]; +}; + +struct fdt_property { + uint32_t tag; + uint32_t len; + uint32_t nameoff; + char data[0]; +}; + +#endif /* !__ASSEMBLY */ + +#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */ +#define FDT_TAGSIZE sizeof(uint32_t) + +#define FDT_BEGIN_NODE 0x1 /* Start node: full name */ +#define FDT_END_NODE 0x2 /* End node */ +#define FDT_PROP 0x3 /* Property: name off, + size, content */ +#define FDT_NOP 0x4 /* nop */ +#define FDT_END 0x9 + +#define FDT_V1_SIZE (7*sizeof(uint32_t)) +#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(uint32_t)) +#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(uint32_t)) +#define FDT_V16_SIZE FDT_V3_SIZE +#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t)) + +#endif /* _FDT_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/libfdt/fdt_ro.c linux-2.6.30-rc4-git/scripts/dtc/libfdt/fdt_ro.c --- linux-2.6.30-rc4/scripts/dtc/libfdt/fdt_ro.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/libfdt/fdt_ro.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,469 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +static int _fdt_nodename_eq(const void *fdt, int offset, + const char *s, int len) +{ + const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1); + + if (! p) + /* short match */ + return 0; + + if (memcmp(p, s, len) != 0) + return 0; + + if (p[len] == '\0') + return 1; + else if (!memchr(s, '@', len) && (p[len] == '@')) + return 1; + else + return 0; +} + +const char *fdt_string(const void *fdt, int stroffset) +{ + return (const char *)fdt + fdt_off_dt_strings(fdt) + stroffset; +} + +int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size) +{ + FDT_CHECK_HEADER(fdt); + *address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address); + *size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size); + return 0; +} + +int fdt_num_mem_rsv(const void *fdt) +{ + int i = 0; + + while (fdt64_to_cpu(_fdt_mem_rsv(fdt, i)->size) != 0) + i++; + return i; +} + +int fdt_subnode_offset_namelen(const void *fdt, int offset, + const char *name, int namelen) +{ + int depth; + + FDT_CHECK_HEADER(fdt); + + for (depth = 0, offset = fdt_next_node(fdt, offset, &depth); + (offset >= 0) && (depth > 0); + offset = fdt_next_node(fdt, offset, &depth)) { + if (depth < 0) + return -FDT_ERR_NOTFOUND; + else if ((depth == 1) + && _fdt_nodename_eq(fdt, offset, name, namelen)) + return offset; + } + + if (offset < 0) + return offset; /* error */ + else + return -FDT_ERR_NOTFOUND; +} + +int fdt_subnode_offset(const void *fdt, int parentoffset, + const char *name) +{ + return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name)); +} + +int fdt_path_offset(const void *fdt, const char *path) +{ + const char *end = path + strlen(path); + const char *p = path; + int offset = 0; + + FDT_CHECK_HEADER(fdt); + + if (*path != '/') + return -FDT_ERR_BADPATH; + + while (*p) { + const char *q; + + while (*p == '/') + p++; + if (! *p) + return offset; + q = strchr(p, '/'); + if (! q) + q = end; + + offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p); + if (offset < 0) + return offset; + + p = q; + } + + return offset; +} + +const char *fdt_get_name(const void *fdt, int nodeoffset, int *len) +{ + const struct fdt_node_header *nh = _fdt_offset_ptr(fdt, nodeoffset); + int err; + + if (((err = fdt_check_header(fdt)) != 0) + || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0)) + goto fail; + + if (len) + *len = strlen(nh->name); + + return nh->name; + + fail: + if (len) + *len = err; + return NULL; +} + +const struct fdt_property *fdt_get_property(const void *fdt, + int nodeoffset, + const char *name, int *lenp) +{ + uint32_t tag; + const struct fdt_property *prop; + int namestroff; + int offset, nextoffset; + int err; + + if (((err = fdt_check_header(fdt)) != 0) + || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0)) + goto fail; + + nextoffset = err; + do { + offset = nextoffset; + + tag = fdt_next_tag(fdt, offset, &nextoffset); + switch (tag) { + case FDT_END: + err = -FDT_ERR_TRUNCATED; + goto fail; + + case FDT_BEGIN_NODE: + case FDT_END_NODE: + case FDT_NOP: + break; + + case FDT_PROP: + err = -FDT_ERR_BADSTRUCTURE; + prop = fdt_offset_ptr(fdt, offset, sizeof(*prop)); + if (! prop) + goto fail; + namestroff = fdt32_to_cpu(prop->nameoff); + if (strcmp(fdt_string(fdt, namestroff), name) == 0) { + /* Found it! */ + int len = fdt32_to_cpu(prop->len); + prop = fdt_offset_ptr(fdt, offset, + sizeof(*prop)+len); + if (! prop) + goto fail; + + if (lenp) + *lenp = len; + + return prop; + } + break; + + default: + err = -FDT_ERR_BADSTRUCTURE; + goto fail; + } + } while ((tag != FDT_BEGIN_NODE) && (tag != FDT_END_NODE)); + + err = -FDT_ERR_NOTFOUND; + fail: + if (lenp) + *lenp = err; + return NULL; +} + +const void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp) +{ + const struct fdt_property *prop; + + prop = fdt_get_property(fdt, nodeoffset, name, lenp); + if (! prop) + return NULL; + + return prop->data; +} + +uint32_t fdt_get_phandle(const void *fdt, int nodeoffset) +{ + const uint32_t *php; + int len; + + php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len); + if (!php || (len != sizeof(*php))) + return 0; + + return fdt32_to_cpu(*php); +} + +int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen) +{ + int pdepth = 0, p = 0; + int offset, depth, namelen; + const char *name; + + FDT_CHECK_HEADER(fdt); + + if (buflen < 2) + return -FDT_ERR_NOSPACE; + + for (offset = 0, depth = 0; + (offset >= 0) && (offset <= nodeoffset); + offset = fdt_next_node(fdt, offset, &depth)) { + if (pdepth < depth) + continue; /* overflowed buffer */ + + while (pdepth > depth) { + do { + p--; + } while (buf[p-1] != '/'); + pdepth--; + } + + name = fdt_get_name(fdt, offset, &namelen); + if (!name) + return namelen; + if ((p + namelen + 1) <= buflen) { + memcpy(buf + p, name, namelen); + p += namelen; + buf[p++] = '/'; + pdepth++; + } + + if (offset == nodeoffset) { + if (pdepth < (depth + 1)) + return -FDT_ERR_NOSPACE; + + if (p > 1) /* special case so that root path is "/", not "" */ + p--; + buf[p] = '\0'; + return p; + } + } + + if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) + return -FDT_ERR_BADOFFSET; + else if (offset == -FDT_ERR_BADOFFSET) + return -FDT_ERR_BADSTRUCTURE; + + return offset; /* error from fdt_next_node() */ +} + +int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, + int supernodedepth, int *nodedepth) +{ + int offset, depth; + int supernodeoffset = -FDT_ERR_INTERNAL; + + FDT_CHECK_HEADER(fdt); + + if (supernodedepth < 0) + return -FDT_ERR_NOTFOUND; + + for (offset = 0, depth = 0; + (offset >= 0) && (offset <= nodeoffset); + offset = fdt_next_node(fdt, offset, &depth)) { + if (depth == supernodedepth) + supernodeoffset = offset; + + if (offset == nodeoffset) { + if (nodedepth) + *nodedepth = depth; + + if (supernodedepth > depth) + return -FDT_ERR_NOTFOUND; + else + return supernodeoffset; + } + } + + if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) + return -FDT_ERR_BADOFFSET; + else if (offset == -FDT_ERR_BADOFFSET) + return -FDT_ERR_BADSTRUCTURE; + + return offset; /* error from fdt_next_node() */ +} + +int fdt_node_depth(const void *fdt, int nodeoffset) +{ + int nodedepth; + int err; + + err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth); + if (err) + return (err < 0) ? err : -FDT_ERR_INTERNAL; + return nodedepth; +} + +int fdt_parent_offset(const void *fdt, int nodeoffset) +{ + int nodedepth = fdt_node_depth(fdt, nodeoffset); + + if (nodedepth < 0) + return nodedepth; + return fdt_supernode_atdepth_offset(fdt, nodeoffset, + nodedepth - 1, NULL); +} + +int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, + const char *propname, + const void *propval, int proplen) +{ + int offset; + const void *val; + int len; + + FDT_CHECK_HEADER(fdt); + + /* FIXME: The algorithm here is pretty horrible: we scan each + * property of a node in fdt_getprop(), then if that didn't + * find what we want, we scan over them again making our way + * to the next node. Still it's the easiest to implement + * approach; performance can come later. */ + for (offset = fdt_next_node(fdt, startoffset, NULL); + offset >= 0; + offset = fdt_next_node(fdt, offset, NULL)) { + val = fdt_getprop(fdt, offset, propname, &len); + if (val && (len == proplen) + && (memcmp(val, propval, len) == 0)) + return offset; + } + + return offset; /* error from fdt_next_node() */ +} + +int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle) +{ + if ((phandle == 0) || (phandle == -1)) + return -FDT_ERR_BADPHANDLE; + phandle = cpu_to_fdt32(phandle); + return fdt_node_offset_by_prop_value(fdt, -1, "linux,phandle", + &phandle, sizeof(phandle)); +} + +int _stringlist_contains(const char *strlist, int listlen, const char *str) +{ + int len = strlen(str); + const char *p; + + while (listlen >= len) { + if (memcmp(str, strlist, len+1) == 0) + return 1; + p = memchr(strlist, '\0', listlen); + if (!p) + return 0; /* malformed strlist.. */ + listlen -= (p-strlist) + 1; + strlist = p + 1; + } + return 0; +} + +int fdt_node_check_compatible(const void *fdt, int nodeoffset, + const char *compatible) +{ + const void *prop; + int len; + + prop = fdt_getprop(fdt, nodeoffset, "compatible", &len); + if (!prop) + return len; + if (_stringlist_contains(prop, len, compatible)) + return 0; + else + return 1; +} + +int fdt_node_offset_by_compatible(const void *fdt, int startoffset, + const char *compatible) +{ + int offset, err; + + FDT_CHECK_HEADER(fdt); + + /* FIXME: The algorithm here is pretty horrible: we scan each + * property of a node in fdt_node_check_compatible(), then if + * that didn't find what we want, we scan over them again + * making our way to the next node. Still it's the easiest to + * implement approach; performance can come later. */ + for (offset = fdt_next_node(fdt, startoffset, NULL); + offset >= 0; + offset = fdt_next_node(fdt, offset, NULL)) { + err = fdt_node_check_compatible(fdt, offset, compatible); + if ((err < 0) && (err != -FDT_ERR_NOTFOUND)) + return err; + else if (err == 0) + return offset; + } + + return offset; /* error from fdt_next_node() */ +} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/libfdt/fdt_rw.c linux-2.6.30-rc4-git/scripts/dtc/libfdt/fdt_rw.c --- linux-2.6.30-rc4/scripts/dtc/libfdt/fdt_rw.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/libfdt/fdt_rw.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,463 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +static int _fdt_blocks_misordered(const void *fdt, + int mem_rsv_size, int struct_size) +{ + return (fdt_off_mem_rsvmap(fdt) < FDT_ALIGN(sizeof(struct fdt_header), 8)) + || (fdt_off_dt_struct(fdt) < + (fdt_off_mem_rsvmap(fdt) + mem_rsv_size)) + || (fdt_off_dt_strings(fdt) < + (fdt_off_dt_struct(fdt) + struct_size)) + || (fdt_totalsize(fdt) < + (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt))); +} + +static int _fdt_rw_check_header(void *fdt) +{ + FDT_CHECK_HEADER(fdt); + + if (fdt_version(fdt) < 17) + return -FDT_ERR_BADVERSION; + if (_fdt_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry), + fdt_size_dt_struct(fdt))) + return -FDT_ERR_BADLAYOUT; + if (fdt_version(fdt) > 17) + fdt_set_version(fdt, 17); + + return 0; +} + +#define FDT_RW_CHECK_HEADER(fdt) \ + { \ + int err; \ + if ((err = _fdt_rw_check_header(fdt)) != 0) \ + return err; \ + } + +static inline int _fdt_data_size(void *fdt) +{ + return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); +} + +static int _fdt_splice(void *fdt, void *splicepoint, int oldlen, int newlen) +{ + char *p = splicepoint; + char *end = (char *)fdt + _fdt_data_size(fdt); + + if (((p + oldlen) < p) || ((p + oldlen) > end)) + return -FDT_ERR_BADOFFSET; + if ((end - oldlen + newlen) > ((char *)fdt + fdt_totalsize(fdt))) + return -FDT_ERR_NOSPACE; + memmove(p + newlen, p + oldlen, end - p - oldlen); + return 0; +} + +static int _fdt_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p, + int oldn, int newn) +{ + int delta = (newn - oldn) * sizeof(*p); + int err; + err = _fdt_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p)); + if (err) + return err; + fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta); + fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); + return 0; +} + +static int _fdt_splice_struct(void *fdt, void *p, + int oldlen, int newlen) +{ + int delta = newlen - oldlen; + int err; + + if ((err = _fdt_splice(fdt, p, oldlen, newlen))) + return err; + + fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta); + fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); + return 0; +} + +static int _fdt_splice_string(void *fdt, int newlen) +{ + void *p = (char *)fdt + + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); + int err; + + if ((err = _fdt_splice(fdt, p, 0, newlen))) + return err; + + fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen); + return 0; +} + +static int _fdt_find_add_string(void *fdt, const char *s) +{ + char *strtab = (char *)fdt + fdt_off_dt_strings(fdt); + const char *p; + char *new; + int len = strlen(s) + 1; + int err; + + p = _fdt_find_string(strtab, fdt_size_dt_strings(fdt), s); + if (p) + /* found it */ + return (p - strtab); + + new = strtab + fdt_size_dt_strings(fdt); + err = _fdt_splice_string(fdt, len); + if (err) + return err; + + memcpy(new, s, len); + return (new - strtab); +} + +int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size) +{ + struct fdt_reserve_entry *re; + int err; + + FDT_RW_CHECK_HEADER(fdt); + + re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt)); + err = _fdt_splice_mem_rsv(fdt, re, 0, 1); + if (err) + return err; + + re->address = cpu_to_fdt64(address); + re->size = cpu_to_fdt64(size); + return 0; +} + +int fdt_del_mem_rsv(void *fdt, int n) +{ + struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n); + int err; + + FDT_RW_CHECK_HEADER(fdt); + + if (n >= fdt_num_mem_rsv(fdt)) + return -FDT_ERR_NOTFOUND; + + err = _fdt_splice_mem_rsv(fdt, re, 1, 0); + if (err) + return err; + return 0; +} + +static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name, + int len, struct fdt_property **prop) +{ + int oldlen; + int err; + + *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen); + if (! (*prop)) + return oldlen; + + if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen), + FDT_TAGALIGN(len)))) + return err; + + (*prop)->len = cpu_to_fdt32(len); + return 0; +} + +static int _fdt_add_property(void *fdt, int nodeoffset, const char *name, + int len, struct fdt_property **prop) +{ + int proplen; + int nextoffset; + int namestroff; + int err; + + if ((nextoffset = _fdt_check_node_offset(fdt, nodeoffset)) < 0) + return nextoffset; + + namestroff = _fdt_find_add_string(fdt, name); + if (namestroff < 0) + return namestroff; + + *prop = _fdt_offset_ptr_w(fdt, nextoffset); + proplen = sizeof(**prop) + FDT_TAGALIGN(len); + + err = _fdt_splice_struct(fdt, *prop, 0, proplen); + if (err) + return err; + + (*prop)->tag = cpu_to_fdt32(FDT_PROP); + (*prop)->nameoff = cpu_to_fdt32(namestroff); + (*prop)->len = cpu_to_fdt32(len); + return 0; +} + +int fdt_set_name(void *fdt, int nodeoffset, const char *name) +{ + char *namep; + int oldlen, newlen; + int err; + + FDT_RW_CHECK_HEADER(fdt); + + namep = (char *)(uintptr_t)fdt_get_name(fdt, nodeoffset, &oldlen); + if (!namep) + return oldlen; + + newlen = strlen(name); + + err = _fdt_splice_struct(fdt, namep, FDT_TAGALIGN(oldlen+1), + FDT_TAGALIGN(newlen+1)); + if (err) + return err; + + memcpy(namep, name, newlen+1); + return 0; +} + +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + struct fdt_property *prop; + int err; + + FDT_RW_CHECK_HEADER(fdt); + + err = _fdt_resize_property(fdt, nodeoffset, name, len, &prop); + if (err == -FDT_ERR_NOTFOUND) + err = _fdt_add_property(fdt, nodeoffset, name, len, &prop); + if (err) + return err; + + memcpy(prop->data, val, len); + return 0; +} + +int fdt_delprop(void *fdt, int nodeoffset, const char *name) +{ + struct fdt_property *prop; + int len, proplen; + + FDT_RW_CHECK_HEADER(fdt); + + prop = fdt_get_property_w(fdt, nodeoffset, name, &len); + if (! prop) + return len; + + proplen = sizeof(*prop) + FDT_TAGALIGN(len); + return _fdt_splice_struct(fdt, prop, proplen, 0); +} + +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen) +{ + struct fdt_node_header *nh; + int offset, nextoffset; + int nodelen; + int err; + uint32_t tag; + uint32_t *endtag; + + FDT_RW_CHECK_HEADER(fdt); + + offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen); + if (offset >= 0) + return -FDT_ERR_EXISTS; + else if (offset != -FDT_ERR_NOTFOUND) + return offset; + + /* Try to place the new node after the parent's properties */ + fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */ + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + } while ((tag == FDT_PROP) || (tag == FDT_NOP)); + + nh = _fdt_offset_ptr_w(fdt, offset); + nodelen = sizeof(*nh) + FDT_TAGALIGN(namelen+1) + FDT_TAGSIZE; + + err = _fdt_splice_struct(fdt, nh, 0, nodelen); + if (err) + return err; + + nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); + memset(nh->name, 0, FDT_TAGALIGN(namelen+1)); + memcpy(nh->name, name, namelen); + endtag = (uint32_t *)((char *)nh + nodelen - FDT_TAGSIZE); + *endtag = cpu_to_fdt32(FDT_END_NODE); + + return offset; +} + +int fdt_add_subnode(void *fdt, int parentoffset, const char *name) +{ + return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name)); +} + +int fdt_del_node(void *fdt, int nodeoffset) +{ + int endoffset; + + FDT_RW_CHECK_HEADER(fdt); + + endoffset = _fdt_node_end_offset(fdt, nodeoffset); + if (endoffset < 0) + return endoffset; + + return _fdt_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset), + endoffset - nodeoffset, 0); +} + +static void _fdt_packblocks(const char *old, char *new, + int mem_rsv_size, int struct_size) +{ + int mem_rsv_off, struct_off, strings_off; + + mem_rsv_off = FDT_ALIGN(sizeof(struct fdt_header), 8); + struct_off = mem_rsv_off + mem_rsv_size; + strings_off = struct_off + struct_size; + + memmove(new + mem_rsv_off, old + fdt_off_mem_rsvmap(old), mem_rsv_size); + fdt_set_off_mem_rsvmap(new, mem_rsv_off); + + memmove(new + struct_off, old + fdt_off_dt_struct(old), struct_size); + fdt_set_off_dt_struct(new, struct_off); + fdt_set_size_dt_struct(new, struct_size); + + memmove(new + strings_off, old + fdt_off_dt_strings(old), + fdt_size_dt_strings(old)); + fdt_set_off_dt_strings(new, strings_off); + fdt_set_size_dt_strings(new, fdt_size_dt_strings(old)); +} + +int fdt_open_into(const void *fdt, void *buf, int bufsize) +{ + int err; + int mem_rsv_size, struct_size; + int newsize; + const char *fdtstart = fdt; + const char *fdtend = fdtstart + fdt_totalsize(fdt); + char *tmp; + + FDT_CHECK_HEADER(fdt); + + mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) + * sizeof(struct fdt_reserve_entry); + + if (fdt_version(fdt) >= 17) { + struct_size = fdt_size_dt_struct(fdt); + } else { + struct_size = 0; + while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END) + ; + } + + if (!_fdt_blocks_misordered(fdt, mem_rsv_size, struct_size)) { + /* no further work necessary */ + err = fdt_move(fdt, buf, bufsize); + if (err) + return err; + fdt_set_version(buf, 17); + fdt_set_size_dt_struct(buf, struct_size); + fdt_set_totalsize(buf, bufsize); + return 0; + } + + /* Need to reorder */ + newsize = FDT_ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size + + struct_size + fdt_size_dt_strings(fdt); + + if (bufsize < newsize) + return -FDT_ERR_NOSPACE; + + /* First attempt to build converted tree at beginning of buffer */ + tmp = buf; + /* But if that overlaps with the old tree... */ + if (((tmp + newsize) > fdtstart) && (tmp < fdtend)) { + /* Try right after the old tree instead */ + tmp = (char *)(uintptr_t)fdtend; + if ((tmp + newsize) > ((char *)buf + bufsize)) + return -FDT_ERR_NOSPACE; + } + + _fdt_packblocks(fdt, tmp, mem_rsv_size, struct_size); + memmove(buf, tmp, newsize); + + fdt_set_magic(buf, FDT_MAGIC); + fdt_set_totalsize(buf, bufsize); + fdt_set_version(buf, 17); + fdt_set_last_comp_version(buf, 16); + fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt)); + + return 0; +} + +int fdt_pack(void *fdt) +{ + int mem_rsv_size; + + FDT_RW_CHECK_HEADER(fdt); + + mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) + * sizeof(struct fdt_reserve_entry); + _fdt_packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt)); + fdt_set_totalsize(fdt, _fdt_data_size(fdt)); + + return 0; +} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/libfdt/fdt_strerror.c linux-2.6.30-rc4-git/scripts/dtc/libfdt/fdt_strerror.c --- linux-2.6.30-rc4/scripts/dtc/libfdt/fdt_strerror.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/libfdt/fdt_strerror.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,96 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +struct fdt_errtabent { + const char *str; +}; + +#define FDT_ERRTABENT(val) \ + [(val)] = { .str = #val, } + +static struct fdt_errtabent fdt_errtable[] = { + FDT_ERRTABENT(FDT_ERR_NOTFOUND), + FDT_ERRTABENT(FDT_ERR_EXISTS), + FDT_ERRTABENT(FDT_ERR_NOSPACE), + + FDT_ERRTABENT(FDT_ERR_BADOFFSET), + FDT_ERRTABENT(FDT_ERR_BADPATH), + FDT_ERRTABENT(FDT_ERR_BADSTATE), + + FDT_ERRTABENT(FDT_ERR_TRUNCATED), + FDT_ERRTABENT(FDT_ERR_BADMAGIC), + FDT_ERRTABENT(FDT_ERR_BADVERSION), + FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE), + FDT_ERRTABENT(FDT_ERR_BADLAYOUT), +}; +#define FDT_ERRTABSIZE (sizeof(fdt_errtable) / sizeof(fdt_errtable[0])) + +const char *fdt_strerror(int errval) +{ + if (errval > 0) + return ""; + else if (errval == 0) + return ""; + else if (errval > -FDT_ERRTABSIZE) { + const char *s = fdt_errtable[-errval].str; + + if (s) + return s; + } + + return ""; +} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/libfdt/fdt_sw.c linux-2.6.30-rc4-git/scripts/dtc/libfdt/fdt_sw.c --- linux-2.6.30-rc4/scripts/dtc/libfdt/fdt_sw.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/libfdt/fdt_sw.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,257 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +static int _fdt_sw_check_header(void *fdt) +{ + if (fdt_magic(fdt) != FDT_SW_MAGIC) + return -FDT_ERR_BADMAGIC; + /* FIXME: should check more details about the header state */ + return 0; +} + +#define FDT_SW_CHECK_HEADER(fdt) \ + { \ + int err; \ + if ((err = _fdt_sw_check_header(fdt)) != 0) \ + return err; \ + } + +static void *_fdt_grab_space(void *fdt, int len) +{ + int offset = fdt_size_dt_struct(fdt); + int spaceleft; + + spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt) + - fdt_size_dt_strings(fdt); + + if ((offset + len < offset) || (offset + len > spaceleft)) + return NULL; + + fdt_set_size_dt_struct(fdt, offset + len); + return fdt_offset_ptr_w(fdt, offset, len); +} + +int fdt_create(void *buf, int bufsize) +{ + void *fdt = buf; + + if (bufsize < sizeof(struct fdt_header)) + return -FDT_ERR_NOSPACE; + + memset(buf, 0, bufsize); + + fdt_set_magic(fdt, FDT_SW_MAGIC); + fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION); + fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION); + fdt_set_totalsize(fdt, bufsize); + + fdt_set_off_mem_rsvmap(fdt, FDT_ALIGN(sizeof(struct fdt_header), + sizeof(struct fdt_reserve_entry))); + fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt)); + fdt_set_off_dt_strings(fdt, bufsize); + + return 0; +} + +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size) +{ + struct fdt_reserve_entry *re; + int offset; + + FDT_SW_CHECK_HEADER(fdt); + + if (fdt_size_dt_struct(fdt)) + return -FDT_ERR_BADSTATE; + + offset = fdt_off_dt_struct(fdt); + if ((offset + sizeof(*re)) > fdt_totalsize(fdt)) + return -FDT_ERR_NOSPACE; + + re = (struct fdt_reserve_entry *)((char *)fdt + offset); + re->address = cpu_to_fdt64(addr); + re->size = cpu_to_fdt64(size); + + fdt_set_off_dt_struct(fdt, offset + sizeof(*re)); + + return 0; +} + +int fdt_finish_reservemap(void *fdt) +{ + return fdt_add_reservemap_entry(fdt, 0, 0); +} + +int fdt_begin_node(void *fdt, const char *name) +{ + struct fdt_node_header *nh; + int namelen = strlen(name) + 1; + + FDT_SW_CHECK_HEADER(fdt); + + nh = _fdt_grab_space(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen)); + if (! nh) + return -FDT_ERR_NOSPACE; + + nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); + memcpy(nh->name, name, namelen); + return 0; +} + +int fdt_end_node(void *fdt) +{ + uint32_t *en; + + FDT_SW_CHECK_HEADER(fdt); + + en = _fdt_grab_space(fdt, FDT_TAGSIZE); + if (! en) + return -FDT_ERR_NOSPACE; + + *en = cpu_to_fdt32(FDT_END_NODE); + return 0; +} + +static int _fdt_find_add_string(void *fdt, const char *s) +{ + char *strtab = (char *)fdt + fdt_totalsize(fdt); + const char *p; + int strtabsize = fdt_size_dt_strings(fdt); + int len = strlen(s) + 1; + int struct_top, offset; + + p = _fdt_find_string(strtab - strtabsize, strtabsize, s); + if (p) + return p - strtab; + + /* Add it */ + offset = -strtabsize - len; + struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); + if (fdt_totalsize(fdt) + offset < struct_top) + return 0; /* no more room :( */ + + memcpy(strtab + offset, s, len); + fdt_set_size_dt_strings(fdt, strtabsize + len); + return offset; +} + +int fdt_property(void *fdt, const char *name, const void *val, int len) +{ + struct fdt_property *prop; + int nameoff; + + FDT_SW_CHECK_HEADER(fdt); + + nameoff = _fdt_find_add_string(fdt, name); + if (nameoff == 0) + return -FDT_ERR_NOSPACE; + + prop = _fdt_grab_space(fdt, sizeof(*prop) + FDT_TAGALIGN(len)); + if (! prop) + return -FDT_ERR_NOSPACE; + + prop->tag = cpu_to_fdt32(FDT_PROP); + prop->nameoff = cpu_to_fdt32(nameoff); + prop->len = cpu_to_fdt32(len); + memcpy(prop->data, val, len); + return 0; +} + +int fdt_finish(void *fdt) +{ + char *p = (char *)fdt; + uint32_t *end; + int oldstroffset, newstroffset; + uint32_t tag; + int offset, nextoffset; + + FDT_SW_CHECK_HEADER(fdt); + + /* Add terminator */ + end = _fdt_grab_space(fdt, sizeof(*end)); + if (! end) + return -FDT_ERR_NOSPACE; + *end = cpu_to_fdt32(FDT_END); + + /* Relocate the string table */ + oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt); + newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); + memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt)); + fdt_set_off_dt_strings(fdt, newstroffset); + + /* Walk the structure, correcting string offsets */ + offset = 0; + while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) { + if (tag == FDT_PROP) { + struct fdt_property *prop = + fdt_offset_ptr_w(fdt, offset, sizeof(*prop)); + int nameoff; + + if (! prop) + return -FDT_ERR_BADSTRUCTURE; + + nameoff = fdt32_to_cpu(prop->nameoff); + nameoff += fdt_size_dt_strings(fdt); + prop->nameoff = cpu_to_fdt32(nameoff); + } + offset = nextoffset; + } + + /* Finally, adjust the header */ + fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt)); + fdt_set_magic(fdt, FDT_MAGIC); + return 0; +} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/libfdt/fdt_wip.c linux-2.6.30-rc4-git/scripts/dtc/libfdt/fdt_wip.c --- linux-2.6.30-rc4/scripts/dtc/libfdt/fdt_wip.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/libfdt/fdt_wip.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,145 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + void *propval; + int proplen; + + propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen); + if (! propval) + return proplen; + + if (proplen != len) + return -FDT_ERR_NOSPACE; + + memcpy(propval, val, len); + return 0; +} + +static void _fdt_nop_region(void *start, int len) +{ + uint32_t *p; + + for (p = start; (char *)p < ((char *)start + len); p++) + *p = cpu_to_fdt32(FDT_NOP); +} + +int fdt_nop_property(void *fdt, int nodeoffset, const char *name) +{ + struct fdt_property *prop; + int len; + + prop = fdt_get_property_w(fdt, nodeoffset, name, &len); + if (! prop) + return len; + + _fdt_nop_region(prop, len + sizeof(*prop)); + + return 0; +} + +int _fdt_node_end_offset(void *fdt, int nodeoffset) +{ + int level = 0; + uint32_t tag; + int offset, nextoffset; + + tag = fdt_next_tag(fdt, nodeoffset, &nextoffset); + if (tag != FDT_BEGIN_NODE) + return -FDT_ERR_BADOFFSET; + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + + switch (tag) { + case FDT_END: + return offset; + + case FDT_BEGIN_NODE: + level++; + break; + + case FDT_END_NODE: + level--; + break; + + case FDT_PROP: + case FDT_NOP: + break; + + default: + return -FDT_ERR_BADSTRUCTURE; + } + } while (level >= 0); + + return nextoffset; +} + +int fdt_nop_node(void *fdt, int nodeoffset) +{ + int endoffset; + + endoffset = _fdt_node_end_offset(fdt, nodeoffset); + if (endoffset < 0) + return endoffset; + + _fdt_nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0), + endoffset - nodeoffset); + return 0; +} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/libfdt/libfdt_env.h linux-2.6.30-rc4-git/scripts/dtc/libfdt/libfdt_env.h --- linux-2.6.30-rc4/scripts/dtc/libfdt/libfdt_env.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/libfdt/libfdt_env.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,23 @@ +#ifndef _LIBFDT_ENV_H +#define _LIBFDT_ENV_H + +#include +#include +#include + +#define _B(n) ((unsigned long long)((uint8_t *)&x)[n]) +static inline uint32_t fdt32_to_cpu(uint32_t x) +{ + return (_B(0) << 24) | (_B(1) << 16) | (_B(2) << 8) | _B(3); +} +#define cpu_to_fdt32(x) fdt32_to_cpu(x) + +static inline uint64_t fdt64_to_cpu(uint64_t x) +{ + return (_B(0) << 56) | (_B(1) << 48) | (_B(2) << 40) | (_B(3) << 32) + | (_B(4) << 24) | (_B(5) << 16) | (_B(6) << 8) | _B(7); +} +#define cpu_to_fdt64(x) fdt64_to_cpu(x) +#undef _B + +#endif /* _LIBFDT_ENV_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/libfdt/libfdt.h linux-2.6.30-rc4-git/scripts/dtc/libfdt/libfdt.h --- linux-2.6.30-rc4/scripts/dtc/libfdt/libfdt.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/libfdt/libfdt.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,1076 @@ +#ifndef _LIBFDT_H +#define _LIBFDT_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include + +#define FDT_FIRST_SUPPORTED_VERSION 0x10 +#define FDT_LAST_SUPPORTED_VERSION 0x11 + +/* Error codes: informative error codes */ +#define FDT_ERR_NOTFOUND 1 + /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ +#define FDT_ERR_EXISTS 2 + /* FDT_ERR_EXISTS: Attemped to create a node or property which + * already exists */ +#define FDT_ERR_NOSPACE 3 + /* FDT_ERR_NOSPACE: Operation needed to expand the device + * tree, but its buffer did not have sufficient space to + * contain the expanded tree. Use fdt_open_into() to move the + * device tree to a buffer with more space. */ + +/* Error codes: codes for bad parameters */ +#define FDT_ERR_BADOFFSET 4 + /* FDT_ERR_BADOFFSET: Function was passed a structure block + * offset which is out-of-bounds, or which points to an + * unsuitable part of the structure for the operation. */ +#define FDT_ERR_BADPATH 5 + /* FDT_ERR_BADPATH: Function was passed a badly formatted path + * (e.g. missing a leading / for a function which requires an + * absolute path) */ +#define FDT_ERR_BADPHANDLE 6 + /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle + * value. phandle values of 0 and -1 are not permitted. */ +#define FDT_ERR_BADSTATE 7 + /* FDT_ERR_BADSTATE: Function was passed an incomplete device + * tree created by the sequential-write functions, which is + * not sufficiently complete for the requested operation. */ + +/* Error codes: codes for bad device tree blobs */ +#define FDT_ERR_TRUNCATED 8 + /* FDT_ERR_TRUNCATED: Structure block of the given device tree + * ends without an FDT_END tag. */ +#define FDT_ERR_BADMAGIC 9 + /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a + * device tree at all - it is missing the flattened device + * tree magic number. */ +#define FDT_ERR_BADVERSION 10 + /* FDT_ERR_BADVERSION: Given device tree has a version which + * can't be handled by the requested operation. For + * read-write functions, this may mean that fdt_open_into() is + * required to convert the tree to the expected version. */ +#define FDT_ERR_BADSTRUCTURE 11 + /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt + * structure block or other serious error (e.g. misnested + * nodes, or subnodes preceding properties). */ +#define FDT_ERR_BADLAYOUT 12 + /* FDT_ERR_BADLAYOUT: For read-write functions, the given + * device tree has it's sub-blocks in an order that the + * function can't handle (memory reserve map, then structure, + * then strings). Use fdt_open_into() to reorganize the tree + * into a form suitable for the read-write operations. */ + +/* "Can't happen" error indicating a bug in libfdt */ +#define FDT_ERR_INTERNAL 13 + /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. + * Should never be returned, if it is, it indicates a bug in + * libfdt itself. */ + +#define FDT_ERR_MAX 13 + +/**********************************************************************/ +/* Low-level functions (you probably don't need these) */ +/**********************************************************************/ + +const void *fdt_offset_ptr(const void *fdt, int offset, int checklen); +static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) +{ + return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen); +} + +uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); + +/**********************************************************************/ +/* Traversal functions */ +/**********************************************************************/ + +int fdt_next_node(const void *fdt, int offset, int *depth); + +/**********************************************************************/ +/* General functions */ +/**********************************************************************/ + +#define fdt_get_header(fdt, field) \ + (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field)) +#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) +#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) +#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) +#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) +#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) +#define fdt_version(fdt) (fdt_get_header(fdt, version)) +#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) +#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) +#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) +#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) + +#define __fdt_set_hdr(name) \ + static inline void fdt_set_##name(void *fdt, uint32_t val) \ + { \ + struct fdt_header *fdth = fdt; \ + fdth->name = cpu_to_fdt32(val); \ + } +__fdt_set_hdr(magic); +__fdt_set_hdr(totalsize); +__fdt_set_hdr(off_dt_struct); +__fdt_set_hdr(off_dt_strings); +__fdt_set_hdr(off_mem_rsvmap); +__fdt_set_hdr(version); +__fdt_set_hdr(last_comp_version); +__fdt_set_hdr(boot_cpuid_phys); +__fdt_set_hdr(size_dt_strings); +__fdt_set_hdr(size_dt_struct); +#undef __fdt_set_hdr + +/** + * fdt_check_header - sanity check a device tree or possible device tree + * @fdt: pointer to data which might be a flattened device tree + * + * fdt_check_header() checks that the given buffer contains what + * appears to be a flattened device tree with sane information in its + * header. + * + * returns: + * 0, if the buffer appears to contain a valid device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings, as above + */ +int fdt_check_header(const void *fdt); + +/** + * fdt_move - move a device tree around in memory + * @fdt: pointer to the device tree to move + * @buf: pointer to memory where the device is to be moved + * @bufsize: size of the memory space at buf + * + * fdt_move() relocates, if possible, the device tree blob located at + * fdt to the buffer at buf of size bufsize. The buffer may overlap + * with the existing device tree blob at fdt. Therefore, + * fdt_move(fdt, fdt, fdt_totalsize(fdt)) + * should always succeed. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_move(const void *fdt, void *buf, int bufsize); + +/**********************************************************************/ +/* Read-only functions */ +/**********************************************************************/ + +/** + * fdt_string - retrieve a string from the strings block of a device tree + * @fdt: pointer to the device tree blob + * @stroffset: offset of the string within the strings block (native endian) + * + * fdt_string() retrieves a pointer to a single string from the + * strings block of the device tree blob at fdt. + * + * returns: + * a pointer to the string, on success + * NULL, if stroffset is out of bounds + */ +const char *fdt_string(const void *fdt, int stroffset); + +/** + * fdt_num_mem_rsv - retrieve the number of memory reserve map entries + * @fdt: pointer to the device tree blob + * + * Returns the number of entries in the device tree blob's memory + * reservation map. This does not include the terminating 0,0 entry + * or any other (0,0) entries reserved for expansion. + * + * returns: + * the number of entries + */ +int fdt_num_mem_rsv(const void *fdt); + +/** + * fdt_get_mem_rsv - retrieve one memory reserve map entry + * @fdt: pointer to the device tree blob + * @address, @size: pointers to 64-bit variables + * + * On success, *address and *size will contain the address and size of + * the n-th reserve map entry from the device tree blob, in + * native-endian format. + * + * returns: + * 0, on success + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); + +/** + * fdt_subnode_offset_namelen - find a subnode based on substring + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * @namelen: number of characters of name to consider + * + * Identical to fdt_subnode_offset(), but only examine the first + * namelen characters of name for matching the subnode name. This is + * useful for finding subnodes based on a portion of a larger string, + * such as a full path. + */ +int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, + const char *name, int namelen); +/** + * fdt_subnode_offset - find a subnode of a given node + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * + * fdt_subnode_offset() finds a subnode of the node at structure block + * offset parentoffset with the given name. name may include a unit + * address, in which case fdt_subnode_offset() will find the subnode + * with that unit address, or the unit address may be omitted, in + * which case fdt_subnode_offset() will find an arbitrary subnode + * whose name excluding unit address matches the given name. + * + * returns: + * structure block offset of the requested subnode (>=0), on success + * -FDT_ERR_NOTFOUND, if the requested subnode does not exist + * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); + +/** + * fdt_path_offset - find a tree node by its full path + * @fdt: pointer to the device tree blob + * @path: full path of the node to locate + * + * fdt_path_offset() finds a node of a given path in the device tree. + * Each path component may omit the unit address portion, but the + * results of this are undefined if any such path component is + * ambiguous (that is if there are multiple nodes at the relevant + * level matching the given component, differentiated only by unit + * address). + * + * returns: + * structure block offset of the node with the requested path (>=0), on success + * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid + * -FDT_ERR_NOTFOUND, if the requested node does not exist + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_path_offset(const void *fdt, const char *path); + +/** + * fdt_get_name - retrieve the name of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the starting node + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_name() retrieves the name (including unit address) of the + * device tree node at structure block offset nodeoffset. If lenp is + * non-NULL, the length of this name is also returned, in the integer + * pointed to by lenp. + * + * returns: + * pointer to the node's name, on success + * If lenp is non-NULL, *lenp contains the length of that name (>=0) + * NULL, on error + * if lenp is non-NULL *lenp contains an error code (<0): + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); + +/** + * fdt_get_property - find a given property in a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_property() retrieves a pointer to the fdt_property + * structure within the device tree blob corresponding to the property + * named 'name' of the node at offset nodeoffset. If lenp is + * non-NULL, the length of the property value is also returned, in the + * integer pointed to by lenp. + * + * returns: + * pointer to the structure representing the property + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, + const char *name, + int *lenp) +{ + return (struct fdt_property *)(uintptr_t) + fdt_get_property(fdt, nodeoffset, name, lenp); +} + +/** + * fdt_getprop - retrieve the value of a given property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_getprop() retrieves a pointer to the value of the property + * named 'name' of the node at offset nodeoffset (this will be a + * pointer to within the device blob itself, not a copy of the value). + * If lenp is non-NULL, the length of the property value is also + * returned, in the integer pointed to by lenp. + * + * returns: + * pointer to the property's value + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline void *fdt_getprop_w(void *fdt, int nodeoffset, + const char *name, int *lenp) +{ + return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp); +} + +/** + * fdt_get_phandle - retrieve the phandle of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the node + * + * fdt_get_phandle() retrieves the phandle of the device tree node at + * structure block offset nodeoffset. + * + * returns: + * the phandle of the node at nodeoffset, on success (!= 0, != -1) + * 0, if the node has no phandle, or another error occurs + */ +uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); + +/** + * fdt_get_path - determine the full path of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose path to find + * @buf: character buffer to contain the returned path (will be overwritten) + * @buflen: size of the character buffer at buf + * + * fdt_get_path() computes the full path of the node at offset + * nodeoffset, and records that path in the buffer at buf. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * 0, on success + * buf contains the absolute path of the node at + * nodeoffset, as a NUL-terminated string. + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) + * characters and will not fit in the given buffer. + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); + +/** + * fdt_supernode_atdepth_offset - find a specific ancestor of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * @supernodedepth: depth of the ancestor to find + * @nodedepth: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_supernode_atdepth_offset() finds an ancestor of the given node + * at a specific depth from the root (where the root itself has depth + * 0, its immediate subnodes depth 1 and so forth). So + * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); + * will always return 0, the offset of the root node. If the node at + * nodeoffset has depth D, then: + * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); + * will return nodeoffset itself. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + + * structure block offset of the node at node offset's ancestor + * of depth supernodedepth (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag +* -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, + int supernodedepth, int *nodedepth); + +/** + * fdt_node_depth - find the depth of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_node_depth() finds the depth of a given node. The root node + * has depth 0, its immediate subnodes depth 1 and so forth. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * depth of the node at nodeoffset (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_depth(const void *fdt, int nodeoffset); + +/** + * fdt_parent_offset - find the parent of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_parent_offset() locates the parent node of a given node (that + * is, it finds the offset of the node which contains the node at + * nodeoffset as a subnode). + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset, *twice*. + * + * returns: + * structure block offset of the parent of the node at nodeoffset + * (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_parent_offset(const void *fdt, int nodeoffset); + +/** + * fdt_node_offset_by_prop_value - find nodes with a given property value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @propname: property name to check + * @propval: property value to search for + * @proplen: length of the value in propval + * + * fdt_node_offset_by_prop_value() returns the offset of the first + * node after startoffset, which has a property named propname whose + * value is of length proplen and has value equal to propval; or if + * startoffset is -1, the very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, + * propval, proplen); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, + * propval, proplen); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, + const char *propname, + const void *propval, int proplen); + +/** + * fdt_node_offset_by_phandle - find the node with a given phandle + * @fdt: pointer to the device tree blob + * @phandle: phandle value + * + * fdt_node_offset_by_phandle() returns the offset of the node + * which has the given phandle value. If there is more than one node + * in the tree with the given phandle (an invalid tree), results are + * undefined. + * + * returns: + * structure block offset of the located node (>= 0), on success + * -FDT_ERR_NOTFOUND, no node with that phandle exists + * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); + +/** + * fdt_node_check_compatible: check a node's compatible property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @compatible: string to match against + * + * + * fdt_node_check_compatible() returns 0 if the given node contains a + * 'compatible' property with the given string as one of its elements, + * it returns non-zero otherwise, or on error. + * + * returns: + * 0, if the node has a 'compatible' property listing the given string + * 1, if the node has a 'compatible' property, but it does not list + * the given string + * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property + * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_check_compatible(const void *fdt, int nodeoffset, + const char *compatible); + +/** + * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @compatible: 'compatible' string to match against + * + * fdt_node_offset_by_compatible() returns the offset of the first + * node after startoffset, which has a 'compatible' property which + * lists the given compatible string; or if startoffset is -1, the + * very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_compatible(const void *fdt, int startoffset, + const char *compatible); + +/**********************************************************************/ +/* Write-in-place functions */ +/**********************************************************************/ + +/** + * fdt_setprop_inplace - change a property's value, but not its size + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: pointer to data to replace the property value with + * @len: length of the property value + * + * fdt_setprop_inplace() replaces the value of a given property with + * the data in val, of length len. This function cannot change the + * size of a property, and so will only work if len is equal to the + * current length of the property. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if len is not equal to the property's current length + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +/** + * fdt_setprop_inplace_cell - change the value of a single-cell property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: cell (32-bit integer) value to replace the property with + * + * fdt_setprop_inplace_cell() replaces the value of a given property + * with the 32-bit integer cell value in val, converting val to + * big-endian if necessary. This function cannot change the size of a + * property, and so will only work if the property already exists and + * has length 4. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val)); +} + +/** + * fdt_nop_property - replace a property with nop tags + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to nop + * @name: name of the property to nop + * + * fdt_nop_property() will replace a given property's representation + * in the blob with FDT_NOP tags, effectively removing it from the + * tree. + * + * This function will alter only the bytes in the blob which contain + * the property, and will not alter or move any other part of the + * tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_nop_property(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_nop_node - replace a node (subtree) with nop tags + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to nop + * + * fdt_nop_node() will replace a given node's representation in the + * blob, including all its subnodes, if any, with FDT_NOP tags, + * effectively removing it from the tree. + * + * This function will alter only the bytes in the blob which contain + * the node and its properties and subnodes, and will not alter or + * move any other part of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_nop_node(void *fdt, int nodeoffset); + +/**********************************************************************/ +/* Sequential write functions */ +/**********************************************************************/ + +int fdt_create(void *buf, int bufsize); +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); +int fdt_finish_reservemap(void *fdt); +int fdt_begin_node(void *fdt, const char *name); +int fdt_property(void *fdt, const char *name, const void *val, int len); +static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_property(fdt, name, &val, sizeof(val)); +} +#define fdt_property_string(fdt, name, str) \ + fdt_property(fdt, name, str, strlen(str)+1) +int fdt_end_node(void *fdt); +int fdt_finish(void *fdt); + +/**********************************************************************/ +/* Read-write functions */ +/**********************************************************************/ + +int fdt_open_into(const void *fdt, void *buf, int bufsize); +int fdt_pack(void *fdt); + +/** + * fdt_add_mem_rsv - add one memory reserve map entry + * @fdt: pointer to the device tree blob + * @address, @size: 64-bit values (native endian) + * + * Adds a reserve map entry to the given blob reserving a region at + * address address of length size. + * + * This function will insert data into the reserve map and will + * therefore change the indexes of some entries in the table. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new reservation entry + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); + +/** + * fdt_del_mem_rsv - remove a memory reserve map entry + * @fdt: pointer to the device tree blob + * @n: entry to remove + * + * fdt_del_mem_rsv() removes the n-th memory reserve map entry from + * the blob. + * + * This function will delete data from the reservation table and will + * therefore change the indexes of some entries in the table. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there + * are less than n+1 reserve map entries) + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_del_mem_rsv(void *fdt, int n); + +/** + * fdt_set_name - change the name of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of a node + * @name: name to give the node + * + * fdt_set_name() replaces the name (including unit address, if any) + * of the given node with the given string. NOTE: this function can't + * efficiently check if the new name is unique amongst the given + * node's siblings; results are undefined if this function is invoked + * with a name equal to one of the given node's siblings. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob + * to contain the new name + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_set_name(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_setprop - create or change a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: pointer to data to set the property value to + * @len: length of the property value + * + * fdt_setprop() sets the value of the named property in the given + * node to the given value and length, creating the property if it + * does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +/** + * fdt_setprop_cell - set a property to a single cell value + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 32-bit integer value for the property (native endian) + * + * fdt_setprop_cell() sets the value of the named property in the + * given node to the given cell value (converting to big-endian if + * necessary), or creates a new property with that value if it does + * not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, + uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val)); +} + +/** + * fdt_setprop_string - set a property to a string value + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @str: string value for the property + * + * fdt_setprop_string() sets the value of the named property in the + * given node to the given string value (using the length of the + * string to determine the new length of the property), or creates a + * new property with that value if it does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#define fdt_setprop_string(fdt, nodeoffset, name, str) \ + fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) + +/** + * fdt_delprop - delete a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to nop + * @name: name of the property to nop + * + * fdt_del_property() will delete the given property. + * + * This function will delete data from the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_delprop(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_add_subnode_namelen - creates a new node based on substring + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * @namelen: number of characters of name to consider + * + * Identical to fdt_add_subnode(), but use only the first namelen + * characters of name as the name of the new node. This is useful for + * creating subnodes based on a portion of a larger string, such as a + * full path. + */ +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen); + +/** + * fdt_add_subnode - creates a new node + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * + * fdt_add_subnode() creates a new node as a subnode of the node at + * structure block offset parentoffset, with the given name (which + * should include the unit address, if any). + * + * This function will insert data into the blob, and will therefore + * change the offsets of some existing nodes. + + * returns: + * structure block offset of the created nodeequested subnode (>=0), on success + * -FDT_ERR_NOTFOUND, if the requested subnode does not exist + * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag + * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of + * the given name + * -FDT_ERR_NOSPACE, if there is insufficient free space in the + * blob to contain the new node + * -FDT_ERR_NOSPACE + * -FDT_ERR_BADLAYOUT + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_add_subnode(void *fdt, int parentoffset, const char *name); + +/** + * fdt_del_node - delete a node (subtree) + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to nop + * + * fdt_del_node() will remove the given node, including all its + * subnodes if any, from the blob. + * + * This function will delete data from the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_del_node(void *fdt, int nodeoffset); + +/**********************************************************************/ +/* Debugging / informational functions */ +/**********************************************************************/ + +const char *fdt_strerror(int errval); + +#endif /* _LIBFDT_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/libfdt/libfdt_internal.h linux-2.6.30-rc4-git/scripts/dtc/libfdt/libfdt_internal.h --- linux-2.6.30-rc4/scripts/dtc/libfdt/libfdt_internal.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/libfdt/libfdt_internal.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,95 @@ +#ifndef _LIBFDT_INTERNAL_H +#define _LIBFDT_INTERNAL_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include + +#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) +#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE)) + +#define FDT_CHECK_HEADER(fdt) \ + { \ + int err; \ + if ((err = fdt_check_header(fdt)) != 0) \ + return err; \ + } + +uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset); +int _fdt_check_node_offset(const void *fdt, int offset); +const char *_fdt_find_string(const char *strtab, int tabsize, const char *s); +int _fdt_node_end_offset(void *fdt, int nodeoffset); + +static inline const void *_fdt_offset_ptr(const void *fdt, int offset) +{ + return (const char *)fdt + fdt_off_dt_struct(fdt) + offset; +} + +static inline void *_fdt_offset_ptr_w(void *fdt, int offset) +{ + return (void *)(uintptr_t)_fdt_offset_ptr(fdt, offset); +} + +static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n) +{ + const struct fdt_reserve_entry *rsv_table = + (const struct fdt_reserve_entry *) + ((const char *)fdt + fdt_off_mem_rsvmap(fdt)); + + return rsv_table + n; +} +static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n) +{ + return (void *)(uintptr_t)_fdt_mem_rsv(fdt, n); +} + +#define FDT_SW_MAGIC (~FDT_MAGIC) + +#endif /* _LIBFDT_INTERNAL_H */ diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/libfdt/Makefile.libfdt linux-2.6.30-rc4-git/scripts/dtc/libfdt/Makefile.libfdt --- linux-2.6.30-rc4/scripts/dtc/libfdt/Makefile.libfdt 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/libfdt/Makefile.libfdt 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,8 @@ +# Makefile.libfdt +# +# This is not a complete Makefile of itself. Instead, it is designed to +# be easily embeddable into other systems of Makefiles. +# +LIBFDT_INCLUDES = fdt.h libfdt.h +LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/livetree.c linux-2.6.30-rc4-git/scripts/dtc/livetree.c --- linux-2.6.30-rc4/scripts/dtc/livetree.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/livetree.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,308 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +/* + * Tree building functions + */ + +struct property *build_property(char *name, struct data val, char *label) +{ + struct property *new = xmalloc(sizeof(*new)); + + new->name = name; + new->val = val; + + new->next = NULL; + + new->label = label; + + return new; +} + +struct property *chain_property(struct property *first, struct property *list) +{ + assert(first->next == NULL); + + first->next = list; + return first; +} + +struct property *reverse_properties(struct property *first) +{ + struct property *p = first; + struct property *head = NULL; + struct property *next; + + while (p) { + next = p->next; + p->next = head; + head = p; + p = next; + } + return head; +} + +struct node *build_node(struct property *proplist, struct node *children) +{ + struct node *new = xmalloc(sizeof(*new)); + struct node *child; + + memset(new, 0, sizeof(*new)); + + new->proplist = reverse_properties(proplist); + new->children = children; + + for_each_child(new, child) { + child->parent = new; + } + + return new; +} + +struct node *name_node(struct node *node, char *name, char * label) +{ + assert(node->name == NULL); + + node->name = name; + + node->label = label; + + return node; +} + +struct node *chain_node(struct node *first, struct node *list) +{ + assert(first->next_sibling == NULL); + + first->next_sibling = list; + return first; +} + +void add_property(struct node *node, struct property *prop) +{ + struct property **p; + + prop->next = NULL; + + p = &node->proplist; + while (*p) + p = &((*p)->next); + + *p = prop; +} + +void add_child(struct node *parent, struct node *child) +{ + struct node **p; + + child->next_sibling = NULL; + child->parent = parent; + + p = &parent->children; + while (*p) + p = &((*p)->next_sibling); + + *p = child; +} + +struct reserve_info *build_reserve_entry(uint64_t address, uint64_t size, + char *label) +{ + struct reserve_info *new = xmalloc(sizeof(*new)); + + new->re.address = address; + new->re.size = size; + + new->next = NULL; + + new->label = label; + + return new; +} + +struct reserve_info *chain_reserve_entry(struct reserve_info *first, + struct reserve_info *list) +{ + assert(first->next == NULL); + + first->next = list; + return first; +} + +struct reserve_info *add_reserve_entry(struct reserve_info *list, + struct reserve_info *new) +{ + struct reserve_info *last; + + new->next = NULL; + + if (! list) + return new; + + for (last = list; last->next; last = last->next) + ; + + last->next = new; + + return list; +} + +struct boot_info *build_boot_info(struct reserve_info *reservelist, + struct node *tree, uint32_t boot_cpuid_phys) +{ + struct boot_info *bi; + + bi = xmalloc(sizeof(*bi)); + bi->reservelist = reservelist; + bi->dt = tree; + bi->boot_cpuid_phys = boot_cpuid_phys; + + return bi; +} + +/* + * Tree accessor functions + */ + +const char *get_unitname(struct node *node) +{ + if (node->name[node->basenamelen] == '\0') + return ""; + else + return node->name + node->basenamelen + 1; +} + +struct property *get_property(struct node *node, const char *propname) +{ + struct property *prop; + + for_each_property(node, prop) + if (streq(prop->name, propname)) + return prop; + + return NULL; +} + +cell_t propval_cell(struct property *prop) +{ + assert(prop->val.len == sizeof(cell_t)); + return fdt32_to_cpu(*((cell_t *)prop->val.val)); +} + +struct node *get_subnode(struct node *node, const char *nodename) +{ + struct node *child; + + for_each_child(node, child) + if (streq(child->name, nodename)) + return child; + + return NULL; +} + +struct node *get_node_by_path(struct node *tree, const char *path) +{ + const char *p; + struct node *child; + + if (!path || ! (*path)) + return tree; + + while (path[0] == '/') + path++; + + p = strchr(path, '/'); + + for_each_child(tree, child) { + if (p && strneq(path, child->name, p-path)) + return get_node_by_path(child, p+1); + else if (!p && streq(path, child->name)) + return child; + } + + return NULL; +} + +struct node *get_node_by_label(struct node *tree, const char *label) +{ + struct node *child, *node; + + assert(label && (strlen(label) > 0)); + + if (tree->label && streq(tree->label, label)) + return tree; + + for_each_child(tree, child) { + node = get_node_by_label(child, label); + if (node) + return node; + } + + return NULL; +} + +struct node *get_node_by_phandle(struct node *tree, cell_t phandle) +{ + struct node *child, *node; + + assert((phandle != 0) && (phandle != -1)); + + if (tree->phandle == phandle) + return tree; + + for_each_child(tree, child) { + node = get_node_by_phandle(child, phandle); + if (node) + return node; + } + + return NULL; +} + +struct node *get_node_by_ref(struct node *tree, const char *ref) +{ + if (ref[0] == '/') + return get_node_by_path(tree, ref); + else + return get_node_by_label(tree, ref); +} + +cell_t get_node_phandle(struct node *root, struct node *node) +{ + static cell_t phandle = 1; /* FIXME: ick, static local */ + + if ((node->phandle != 0) && (node->phandle != -1)) + return node->phandle; + + assert(! get_property(node, "linux,phandle")); + + while (get_node_by_phandle(root, phandle)) + phandle++; + + node->phandle = phandle; + add_property(node, + build_property("linux,phandle", + data_append_cell(empty_data, phandle), + NULL)); + + return node->phandle; +} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/Makefile linux-2.6.30-rc4-git/scripts/dtc/Makefile --- linux-2.6.30-rc4/scripts/dtc/Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/Makefile 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,54 @@ +# scripts/dtc makefile + +hostprogs-y := dtc +always := $(hostprogs-y) + +dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \ + srcpos.o checks.o +dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o + +# Source files need to get at the userspace version of libfdt_env.h to compile + +HOSTCFLAGS_DTC := -I$(src) -I$(src)/libfdt + +HOSTCFLAGS_checks.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_data.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_dtc.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_flattree.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_fstree.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_livetree.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_srcpos.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_treesource.o := $(HOSTCFLAGS_DTC) + +HOSTCFLAGS_dtc-lexer.lex.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_dtc-parser.tab.o := $(HOSTCFLAGS_DTC) + +# dependencies on generated files need to be listed explicitly +$(obj)/dtc-parser.tab.o: $(obj)/dtc-parser.tab.c $(obj)/dtc-parser.tab.h +$(obj)/dtc-lexer.lex.o: $(obj)/dtc-lexer.lex.c $(obj)/dtc-parser.tab.h + +targets += dtc-parser.tab.c dtc-lexer.lex.c + +clean-files += dtc-parser.tab.h + +# GENERATE_PARSER := 1 # Uncomment to rebuild flex/bison output + +ifdef GENERATE_PARSER + +BISON = bison +FLEX = flex + +quiet_cmd_bison = BISON $@ + cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped +quiet_cmd_flex = FLEX $@ + cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped + +$(obj)/dtc-parser.tab.c: $(src)/dtc-parser.y FORCE + $(call if_changed,bison) + +$(obj)/dtc-parser.tab.h: $(obj)/dtc-parser.tab.c + +$(obj)/dtc-lexer.lex.c: $(src)/dtc-lexer.l FORCE + $(call if_changed,flex) + +endif diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/Makefile.dtc linux-2.6.30-rc4-git/scripts/dtc/Makefile.dtc --- linux-2.6.30-rc4/scripts/dtc/Makefile.dtc 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/Makefile.dtc 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,9 @@ +# Makefile.dtc +# +# This is not a complete Makefile of itself. Instead, it is designed to +# be easily embeddable into other systems of Makefiles. +# +DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \ + checks.c +DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c +DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o) diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/srcpos.c linux-2.6.30-rc4-git/scripts/dtc/srcpos.c --- linux-2.6.30-rc4/scripts/dtc/srcpos.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/srcpos.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,116 @@ +/* + * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" +#include "srcpos.h" + +/* + * Like yylineno, this is the current open file pos. + */ + +struct dtc_file *srcpos_file; + +static int dtc_open_one(struct dtc_file *file, + const char *search, + const char *fname) +{ + char *fullname; + + if (search) { + fullname = xmalloc(strlen(search) + strlen(fname) + 2); + + strcpy(fullname, search); + strcat(fullname, "/"); + strcat(fullname, fname); + } else { + fullname = strdup(fname); + } + + file->file = fopen(fullname, "r"); + if (!file->file) { + free(fullname); + return 0; + } + + file->name = fullname; + return 1; +} + + +struct dtc_file *dtc_open_file(const char *fname, + const struct search_path *search) +{ + static const struct search_path default_search = { NULL, NULL, NULL }; + + struct dtc_file *file; + const char *slash; + + file = xmalloc(sizeof(struct dtc_file)); + + slash = strrchr(fname, '/'); + if (slash) { + char *dir = xmalloc(slash - fname + 1); + + memcpy(dir, fname, slash - fname); + dir[slash - fname] = 0; + file->dir = dir; + } else { + file->dir = NULL; + } + + if (streq(fname, "-")) { + file->name = "stdin"; + file->file = stdin; + return file; + } + + if (fname[0] == '/') { + file->file = fopen(fname, "r"); + if (!file->file) + goto fail; + + file->name = strdup(fname); + return file; + } + + if (!search) + search = &default_search; + + while (search) { + if (dtc_open_one(file, search->dir, fname)) + return file; + + if (errno != ENOENT) + goto fail; + + search = search->next; + } + +fail: + die("Couldn't open \"%s\": %s\n", fname, strerror(errno)); +} + +void dtc_close_file(struct dtc_file *file) +{ + if (fclose(file->file)) + die("Error closing \"%s\": %s\n", file->name, strerror(errno)); + + free(file->dir); + free(file); +} diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/srcpos.h linux-2.6.30-rc4-git/scripts/dtc/srcpos.h --- linux-2.6.30-rc4/scripts/dtc/srcpos.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/srcpos.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,85 @@ +/* + * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +/* + * Augment the standard YYLTYPE with a filenum index into an + * array of all opened filenames. + */ + +#include + +struct dtc_file { + char *dir; + const char *name; + FILE *file; +}; + +#if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED) +typedef struct YYLTYPE { + int first_line; + int first_column; + int last_line; + int last_column; + struct dtc_file *file; +} YYLTYPE; + +#define YYLTYPE_IS_DECLARED 1 +#define YYLTYPE_IS_TRIVIAL 1 +#endif + +/* Cater to old parser templates. */ +#ifndef YYID +#define YYID(n) (n) +#endif + +#define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (YYID (N)) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + (Current).file = YYRHSLOC (Rhs, N).file; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + (Current).file = YYRHSLOC (Rhs, 0).file; \ + } \ + while (YYID (0)) + + + +extern void yyerror(char const *); +extern void yyerrorf(char const *, ...) __attribute__((format(printf, 1, 2))); + +extern struct dtc_file *srcpos_file; + +struct search_path { + const char *dir; /* NULL for current directory */ + struct search_path *prev, *next; +}; + +extern struct dtc_file *dtc_open_file(const char *fname, + const struct search_path *search); +extern void dtc_close_file(struct dtc_file *file); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/treesource.c linux-2.6.30-rc4-git/scripts/dtc/treesource.c --- linux-2.6.30-rc4/scripts/dtc/treesource.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/treesource.c 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1,278 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" +#include "srcpos.h" + +extern FILE *yyin; +extern int yyparse(void); + +struct boot_info *the_boot_info; +int treesource_error; + +struct boot_info *dt_from_source(const char *fname) +{ + the_boot_info = NULL; + treesource_error = 0; + + srcpos_file = dtc_open_file(fname, NULL); + yyin = srcpos_file->file; + + if (yyparse() != 0) + die("Unable to parse input tree\n"); + + if (treesource_error) + die("Syntax error parsing input tree\n"); + + return the_boot_info; +} + +static void write_prefix(FILE *f, int level) +{ + int i; + + for (i = 0; i < level; i++) + fputc('\t', f); +} + +int isstring(char c) +{ + return (isprint(c) + || (c == '\0') + || strchr("\a\b\t\n\v\f\r", c)); +} + +static void write_propval_string(FILE *f, struct data val) +{ + const char *str = val.val; + int i; + int newchunk = 1; + struct marker *m = val.markers; + + assert(str[val.len-1] == '\0'); + + for (i = 0; i < (val.len-1); i++) { + char c = str[i]; + + if (newchunk) { + while (m && (m->offset <= i)) { + if (m->type == LABEL) { + assert(m->offset == i); + fprintf(f, "%s: ", m->ref); + } + m = m->next; + } + fprintf(f, "\""); + newchunk = 0; + } + + switch (c) { + case '\a': + fprintf(f, "\\a"); + break; + case '\b': + fprintf(f, "\\b"); + break; + case '\t': + fprintf(f, "\\t"); + break; + case '\n': + fprintf(f, "\\n"); + break; + case '\v': + fprintf(f, "\\v"); + break; + case '\f': + fprintf(f, "\\f"); + break; + case '\r': + fprintf(f, "\\r"); + break; + case '\\': + fprintf(f, "\\\\"); + break; + case '\"': + fprintf(f, "\\\""); + break; + case '\0': + fprintf(f, "\", "); + newchunk = 1; + break; + default: + if (isprint(c)) + fprintf(f, "%c", c); + else + fprintf(f, "\\x%02hhx", c); + } + } + fprintf(f, "\""); + + /* Wrap up any labels at the end of the value */ + for_each_marker_of_type(m, LABEL) { + assert (m->offset == val.len); + fprintf(f, " %s:", m->ref); + } +} + +static void write_propval_cells(FILE *f, struct data val) +{ + void *propend = val.val + val.len; + cell_t *cp = (cell_t *)val.val; + struct marker *m = val.markers; + + fprintf(f, "<"); + for (;;) { + while (m && (m->offset <= ((char *)cp - val.val))) { + if (m->type == LABEL) { + assert(m->offset == ((char *)cp - val.val)); + fprintf(f, "%s: ", m->ref); + } + m = m->next; + } + + fprintf(f, "0x%x", fdt32_to_cpu(*cp++)); + if ((void *)cp >= propend) + break; + fprintf(f, " "); + } + + /* Wrap up any labels at the end of the value */ + for_each_marker_of_type(m, LABEL) { + assert (m->offset == val.len); + fprintf(f, " %s:", m->ref); + } + fprintf(f, ">"); +} + +static void write_propval_bytes(FILE *f, struct data val) +{ + void *propend = val.val + val.len; + const char *bp = val.val; + struct marker *m = val.markers; + + fprintf(f, "["); + for (;;) { + while (m && (m->offset == (bp-val.val))) { + if (m->type == LABEL) + fprintf(f, "%s: ", m->ref); + m = m->next; + } + + fprintf(f, "%02hhx", *bp++); + if ((const void *)bp >= propend) + break; + fprintf(f, " "); + } + + /* Wrap up any labels at the end of the value */ + for_each_marker_of_type(m, LABEL) { + assert (m->offset == val.len); + fprintf(f, " %s:", m->ref); + } + fprintf(f, "]"); +} + +static void write_propval(FILE *f, struct property *prop) +{ + int len = prop->val.len; + const char *p = prop->val.val; + struct marker *m = prop->val.markers; + int nnotstring = 0, nnul = 0; + int nnotstringlbl = 0, nnotcelllbl = 0; + int i; + + if (len == 0) { + fprintf(f, ";\n"); + return; + } + + for (i = 0; i < len; i++) { + if (! isstring(p[i])) + nnotstring++; + if (p[i] == '\0') + nnul++; + } + + for_each_marker_of_type(m, LABEL) { + if ((m->offset > 0) && (prop->val.val[m->offset - 1] != '\0')) + nnotstringlbl++; + if ((m->offset % sizeof(cell_t)) != 0) + nnotcelllbl++; + } + + fprintf(f, " = "); + if ((p[len-1] == '\0') && (nnotstring == 0) && (nnul < (len-nnul)) + && (nnotstringlbl == 0)) { + write_propval_string(f, prop->val); + } else if (((len % sizeof(cell_t)) == 0) && (nnotcelllbl == 0)) { + write_propval_cells(f, prop->val); + } else { + write_propval_bytes(f, prop->val); + } + + fprintf(f, ";\n"); +} + +static void write_tree_source_node(FILE *f, struct node *tree, int level) +{ + struct property *prop; + struct node *child; + + write_prefix(f, level); + if (tree->label) + fprintf(f, "%s: ", tree->label); + if (tree->name && (*tree->name)) + fprintf(f, "%s {\n", tree->name); + else + fprintf(f, "/ {\n"); + + for_each_property(tree, prop) { + write_prefix(f, level+1); + if (prop->label) + fprintf(f, "%s: ", prop->label); + fprintf(f, "%s", prop->name); + write_propval(f, prop); + } + for_each_child(tree, child) { + fprintf(f, "\n"); + write_tree_source_node(f, child, level+1); + } + write_prefix(f, level); + fprintf(f, "};\n"); +} + + +void dt_to_source(FILE *f, struct boot_info *bi) +{ + struct reserve_info *re; + + fprintf(f, "/dts-v1/;\n\n"); + + for (re = bi->reservelist; re; re = re->next) { + if (re->label) + fprintf(f, "%s: ", re->label); + fprintf(f, "/memreserve/\t0x%016llx 0x%016llx;\n", + (unsigned long long)re->re.address, + (unsigned long long)re->re.size); + } + + write_tree_source_node(f, bi->dt, 0); +} + diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/dtc/version_gen.h linux-2.6.30-rc4-git/scripts/dtc/version_gen.h --- linux-2.6.30-rc4/scripts/dtc/version_gen.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.30-rc4-git/scripts/dtc/version_gen.h 2009-05-13 09:46:19.000000000 +0200 @@ -0,0 +1 @@ +#define DTC_VERSION "DTC 1.2.0" diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/kernel-doc linux-2.6.30-rc4-git/scripts/kernel-doc --- linux-2.6.30-rc4/scripts/kernel-doc 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/scripts/kernel-doc 2009-05-13 09:46:19.000000000 +0200 @@ -1411,7 +1411,8 @@ sub dump_struct($$) { my $file = shift; my $nested; - if ($x =~/(struct|union)\s+(\w+)\s*{(.*)}/) { + if ($x =~ /(struct|union)\s+(\w+)\s*{(.*)}/) { + #my $decl_type = $1; $declaration_name = $2; my $members = $3; @@ -1420,8 +1421,8 @@ sub dump_struct($$) { $nested = $1; # ignore members marked private: - $members =~ s/\/\*.*?private:.*?public:.*?\*\///gos; - $members =~ s/\/\*.*?private:.*//gos; + $members =~ s/\/\*\s*private:.*?\/\*\s*public:.*?\*\///gos; + $members =~ s/\/\*\s*private:.*//gos; # strip comments: $members =~ s/\/\*.*?\*\///gos; $nested =~ s/\/\*.*?\*\///gos; diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/Makefile linux-2.6.30-rc4-git/scripts/Makefile --- linux-2.6.30-rc4/scripts/Makefile 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/scripts/Makefile 2009-05-13 09:46:19.000000000 +0200 @@ -21,6 +21,7 @@ hostprogs-y += unifdef subdir-$(CONFIG_MODVERSIONS) += genksyms subdir-y += mod subdir-$(CONFIG_SECURITY_SELINUX) += selinux +subdir-$(CONFIG_DTC) += dtc # Let clean descend into subdirs subdir- += basic kconfig package selinux diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/mod/modpost.c linux-2.6.30-rc4-git/scripts/mod/modpost.c --- linux-2.6.30-rc4/scripts/mod/modpost.c 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/scripts/mod/modpost.c 2009-05-13 09:46:19.000000000 +0200 @@ -716,41 +716,27 @@ int match(const char *sym, const char * /* sections that we do not want to do full section mismatch check on */ static const char *section_white_list[] = - { ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL }; + { ".comment", ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL }; /* - * Is this section one we do not want to check? - * This is often debug sections. - * If we are going to check this section then - * test if section name ends with a dot and a number. - * This is used to find sections where the linker have - * appended a dot-number to make the name unique. + * This is used to find sections missing the SHF_ALLOC flag. * The cause of this is often a section specified in assembler - * without "ax" / "aw" and the same section used in .c - * code where gcc add these. + * without "ax" / "aw". */ -static int check_section(const char *modname, const char *sec) +static void check_section(const char *modname, struct elf_info *elf, + Elf_Shdr *sechdr) { - const char *e = sec + strlen(sec) - 1; - if (match(sec, section_white_list)) - return 1; + const char *sec = sech_name(elf, sechdr); - if (*e && isdigit(*e)) { - /* consume all digits */ - while (*e && e != sec && isdigit(*e)) - e--; - if (*e == '.' && !strstr(sec, ".linkonce")) { - warn("%s (%s): unexpected section name.\n" - "The (.[number]+) following section name are " - "ld generated and not expected.\n" - "Did you forget to use \"ax\"/\"aw\" " - "in a .S file?\n" - "Note that for example contains\n" - "section definitions for use in .S files.\n\n", - modname, sec); - } + if (sechdr->sh_type == SHT_PROGBITS && + !(sechdr->sh_flags & SHF_ALLOC) && + !match(sec, section_white_list)) { + warn("%s (%s): unexpected non-allocatable section.\n" + "Did you forget to use \"ax\"/\"aw\" in a .S file?\n" + "Note that for example contains\n" + "section definitions for use in .S files.\n\n", + modname, sec); } - return 0; } @@ -928,8 +914,7 @@ static int section_mismatch(const char * * *probe_one, *_console, *_timer * * Pattern 3: - * Whitelist all refereces from .text.head to .init.data - * Whitelist all refereces from .text.head to .init.text + * Whitelist all references from .head.text to any init section * * Pattern 4: * Some symbols belong to init section but still it is ok to reference @@ -1359,7 +1344,7 @@ static void section_rela(const char *mod fromsec = sech_name(elf, sechdr); fromsec += strlen(".rela"); /* if from section (name) is know good then skip it */ - if (check_section(modname, fromsec)) + if (match(fromsec, section_white_list)) return; for (rela = start; rela < stop; rela++) { @@ -1403,7 +1388,7 @@ static void section_rel(const char *modn fromsec = sech_name(elf, sechdr); fromsec += strlen(".rel"); /* if from section (name) is know good then skip it */ - if (check_section(modname, fromsec)) + if (match(fromsec, section_white_list)) return; for (rel = start; rel < stop; rel++) { @@ -1466,6 +1451,7 @@ static void check_sec_ref(struct module /* Walk through all sections */ for (i = 0; i < elf->hdr->e_shnum; i++) { + check_section(modname, elf, &elf->sechdrs[i]); /* We want to process only relocation sections and not .init */ if (sechdrs[i].sh_type == SHT_RELA) section_rela(modname, elf, &elf->sechdrs[i]); @@ -1990,6 +1976,7 @@ static void read_markers(const char *fna if (!mod->skip) add_marker(mod, marker, fmt); } + release_file(file, size); return; fail: fatal("parse error in markers list file\n"); diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/setlocalversion linux-2.6.30-rc4-git/scripts/setlocalversion --- linux-2.6.30-rc4/scripts/setlocalversion 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/scripts/setlocalversion 2009-05-13 09:46:19.000000000 +0200 @@ -10,13 +10,12 @@ cd "${1:-.}" || usage # Check for git and a git repo. if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then - # Do we have an untagged version? - if git name-rev --tags HEAD | grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then - if tag=`git describe 2>/dev/null`; then - echo $tag | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}' - else - printf '%s%s' -g $head - fi + # Do we have an untagged tag? + if atag=`git describe 2>/dev/null`; then + echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}' + # add -g${head}, if there is no usable tag + else + printf '%s%s' -g $head fi # Is this git on svn? diff -urNp --exclude Documentation/dontdiff linux-2.6.30-rc4/scripts/tags.sh linux-2.6.30-rc4-git/scripts/tags.sh --- linux-2.6.30-rc4/scripts/tags.sh 2009-04-30 06:48:16.000000000 +0200 +++ linux-2.6.30-rc4-git/scripts/tags.sh 2009-05-13 09:46:19.000000000 +0200 @@ -164,10 +164,12 @@ case "$1" in ;; "tags") + rm -f tags xtags ctags ;; "TAGS") + rm -f TAGS xtags etags ;; esac