diff -u -r --new-file u-boot-1.1.2/board/bd2003/bd2003.c u-boot-1.1.2-neon/board/bd2003/bd2003.c --- u-boot-1.1.2/board/bd2003/bd2003.c 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/bd2003/bd2003.c 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,94 @@ +/* + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* ------------------------------------------------------------------------- */ +/* + * LCD panel declarations + */ + +vidinfo_t panel_info = { + vl_col: 1024, //this is corrected in SetPanelInfo + vl_row: 768, + vl_bpix: LCD_BPP, + vl_lcd_line_length: (320 * NBITS(LCD_BPP) ) >> 3 +}; + +void disable_lcd_panel( void ) +{ +} + + +/* ------------------------------------------------------------------------- */ + + +/* + * Miscelaneous platform dependent initialisations + */ + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + /* arch number of Neon Board */ + gd->bd->bi_arch_number = MACH_TYPE_BD2003 ; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0xa0000100; + + return 0; +} + +int board_late_init(void) +{ + setenv("stdout", "serial"); + setenv("stderr", "serial"); + return 0; +} + + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} diff -u -r --new-file u-boot-1.1.2/board/bd2003/config.mk u-boot-1.1.2-neon/board/bd2003/config.mk --- u-boot-1.1.2/board/bd2003/config.mk 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/bd2003/config.mk 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,4 @@ +#TEXT_BASE = 0xa1700000 +TEXT_BASE = 0xA1F00000 +#TEXT_BASE = 0 +PXALCD = 1 diff -u -r --new-file u-boot-1.1.2/board/bd2003/.cvsignore u-boot-1.1.2-neon/board/bd2003/.cvsignore --- u-boot-1.1.2/board/bd2003/.cvsignore 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/bd2003/.cvsignore 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,2 @@ +.depend + diff -u -r --new-file u-boot-1.1.2/board/bd2003/flash.c u-boot-1.1.2-neon/board/bd2003/flash.c --- u-boot-1.1.2/board/bd2003/flash.c 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/bd2003/flash.c 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,477 @@ +/* + * (C) Copyright 2001 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include "lcd.h" + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/* Board support for 1 or 2 flash devices */ +#define FLASH_PORT_WIDTH32 +#undef FLASH_PORT_WIDTH16 + +#ifdef FLASH_PORT_WIDTH16 +#define FLASH_PORT_WIDTH ushort +#define FLASH_PORT_WIDTHV vu_short +#define SWAP(x) __swab16(x) +#else +#define FLASH_PORT_WIDTH ulong +#define FLASH_PORT_WIDTHV vu_long +#define SWAP(x) __swab32(x) +#endif + +#define FPW FLASH_PORT_WIDTH +#define FPWV FLASH_PORT_WIDTHV + +#define mb() __asm__ __volatile__ ("" : : : "memory") + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size (FPW *addr, flash_info_t *info); +static int write_data (flash_info_t *info, ulong dest, FPW data); +static void flash_get_offsets (ulong base, flash_info_t *info); +void inline spin_wheel_init(ulong addr, ulong cnt); +void inline spin_wheel_done( int worked ); +void inline spin_wheel (ulong numleft); + +/*----------------------------------------------------------------------- + */ +ulong bases[] = {PHYS_FLASH_1,PHYS_FLASH_2,1}; +unsigned long flash_init (void) +{ + int i=0; + int j=0; + ulong size = 0; + ulong base; + + while (i < CFG_MAX_FLASH_BANKS) { + base = bases[j++]; + flash_info[i].start[0] = 0; + if (base & 1) break; + if (flash_get_size ((FPW *) base, &flash_info[i])) { + flash_get_offsets (base, &flash_info[i]); + size += flash_info[i].size; + i++; + } + else { +printf( "error reading flash size\n" ); + } + } + if (size>0) { + base = flash_info[0].start[0]; + // Protect monitor and environment sectors + flash_protect ( FLAG_PROTECT_SET, + base, + base + monitor_flash_len - 1, + &flash_info[0] ); + + flash_protect ( FLAG_PROTECT_SET, + base+CFG_ENV_OFFSET, + base+CFG_ENV_OFFSET + CFG_ENV_SIZE - 1, &flash_info[0] ); + } + + return size; +} + +/*----------------------------------------------------------------------- + */ +static void flash_get_offsets (ulong base, flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + return; + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); + info->protect[i] = 0; + } + } +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + printf ("INTEL "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F128J3A: + printf ("28F128J3A\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + return; +} + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size (FPW *addr, flash_info_t *info) +{ + volatile FPW value; + volatile unsigned long *mc = (unsigned long *)MEMORY_CONTROL_BASE; + unsigned long val = 1<<3; + + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + + if (((ulong)addr) > 0x14000000) return 0; + val = mc[(MSC0>>2) +(((ulong)addr)>>27)]; + if (((ulong)addr) & 0x04000000) val = val>>16; + if ( val & (1<<3)) return 0; //if 16 bit bus then return + + /* Write auto select command: read Manufacturer ID */ + addr[0x5555] = (FPW) 0x00AA00AA; + addr[0x2AAA] = (FPW) 0x00550055; + addr[0x5555] = (FPW) 0x00900090; + + mb (); + value = addr[0]; + + switch (value) { + + case (FPW) 0: + case (FPW) INTEL_MANUFACT & 0xFF0000 : + case (FPW) INTEL_MANUFACT & 0x0000FF : + case (FPW) INTEL_MANUFACT: + info->flash_id = FLASH_MAN_INTEL; + break; + + default: +printf( "Invalid flash manufacturer %x\n", value ); + addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ + return (0); /* no or unknown flash */ + } + + mb (); + value = addr[1]; /* device ID */ + + switch (value) { + + case (FPW) 0: + case (FPW) INTEL_ID_28F128J3A & 0xFF0000 : + case (FPW) INTEL_ID_28F128J3A & 0x0000FF : + case (FPW) INTEL_ID_28F128J3A: + info->flash_id += FLASH_28F128J3A; + info->sector_count = 128; + info->size = 0x02000000; + break; /* => 16 MB */ + + default: +printf( "Unknown flash device %x\n", value ); + info->flash_id = FLASH_UNKNOWN; + break; + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf ("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ + + return (info->size); +} + + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong type, start, last; + int rcode = 0; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + type = (info->flash_id & FLASH_VENDMASK); + if ((type != FLASH_MAN_INTEL)) { + printf ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + start = get_timer (0); + last = start; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + char temp[80]; + FPWV *addr = (FPWV *) (info->start[sect]); + FPW status; + + sprintf (temp, "Erasing sector %2d ... \r", sect); + lcd_puts( temp ); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + *addr = (FPW) 0x00500050; /* clear status register */ + *addr = (FPW) 0x00200020; /* erase setup */ + *addr = (FPW) 0x00D000D0; /* erase confirm */ + + while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + *addr = (FPW) 0x00B000B0; /* suspend erase */ + *addr = (FPW) 0x00FF00FF; /* reset to read mode */ + rcode = 1; + break; + } + } + + *addr = 0x00500050; /* clear status register cmd. */ + *addr = 0x00FF00FF; /* resest to read mode */ + } + } + lcd_puts( "\r\n" ); + return rcode; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + * 4 - Flash not identified + */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong cp, wp; + FPW data; + int count, i, l, rc, port_width; + + rc = 0 ; + if (info->flash_id == FLASH_UNKNOWN) { + return 4; + } +/* get lower word aligned address */ +#ifdef FLASH_PORT_WIDTH16 + wp = (addr & ~1); + port_width = 2; +#else + wp = (addr & ~3); + port_width = 4; +#endif + + spin_wheel_init(addr,cnt); + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + for (; i < port_width && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt == 0 && i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + if ((rc = write_data (info, wp, SWAP (data))) != 0) { + goto out; + } + wp += port_width; + } + + /* + * handle word aligned part + */ + count = 0; + while (cnt >= port_width) { + data = 0; + for (i = 0; i < port_width; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_data (info, wp, SWAP (data))) != 0) { + goto out; + } + wp += port_width; + cnt -= port_width; + if (count++ > 0x800) { + spin_wheel (cnt); + count = 0; + } + } + + if (cnt) { + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + rc = write_data (info, wp, SWAP (data)); + } + +out: + spin_wheel_done(0 == rc); + return rc ; +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_data (flash_info_t *info, ulong dest, FPW data) +{ + FPWV *addr = (FPWV *) dest; + FPW old = *addr ; + ulong status; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((old & data) != data) { + printf ("not erased at %08lx (%lx)\n", (ulong) addr, old); + return (2); + } + + if( old != data ) + { + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + *addr = (FPW) 0x00400040; /* write setup */ + *addr = data; + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + /* wait while polling the status register */ + while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { + if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) { + *addr = (FPW) 0x00FF00FF; /* restore read mode */ + return (1); + } + } + *addr = (FPW) 0x00FF00FF; /* restore read mode */ + } /* need to program? */ + + + return (0); +} + +void inline spin_wheel_init(ulong addr, ulong cnt) +{ + char temp[80]; + sprintf( temp, + "\nprogramming flash\n" + "%08lx->%08lx\n" + " ", addr, cnt ); + lcd_puts( temp ); +} + +void inline spin_wheel_done( int worked ) +{ + if( worked ) + spin_wheel(0); + lcd_puts( worked ? "\ncompleted.\n" : "\nfailed!\n" ); +} + +void inline spin_wheel( ulong numleft ) +{ + char temp[40]; + sprintf( temp, "\r %08lx", numleft ); + lcd_puts( temp ); +} diff -u -r --new-file u-boot-1.1.2/board/bd2003/init.script u-boot-1.1.2-neon/board/bd2003/init.script --- u-boot-1.1.2/board/bd2003/init.script 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/bd2003/init.script 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,42 @@ +if fatload mmc 0 a0000000 logo.bmp ; then + bmp info a0000000 ; + bmp display a0000000 ; +else + lecho "No logo present" ; +fi + +if fatload mmc 0 a2000000 uimage ; then + lecho 'load Linux' + if fatload mmc 0 a2200000 mmcinitrd.u-boot ; then + echo 'using initrd' ; + lecho "Booting Linux" + set bootargs root=/dev/ram0 console=ttyS0,115200 debug=7 mtdparts=phys_mapped_flash:1024k(armboot),256k(params),-(rootfs1) + bootm a2000000 a2200000 + else + echo 'testing cramfs img' ; + if fatload mmc 0 a2200000 cramfs.img ; then + if cmp.b 00140000 a2200000 $filesize ; then + echo 'cramfs images match' ; + else + lecho 'filesystems differ...' ; + protect off all ; + erase 00140000 01ffffff ; + cp.b a2200000 00140000 $filesize ; + fi + + set bootargs console=ttyS0,115200 debug=7 mtdparts=phys_mapped_flash:1024k(armboot),256k(params),-(rootfs1) root=/dev/mtdblock3 rootfstype=cramfs + lecho "Booting Linux" + bootm a2000000 + fi + fi +else + echo "No Linux kernel" ; +fi + +lecho 'No Linux, try CE' + +if fatload mmc 0 A0030000 nk.nb0 ; then + g A0030000 ; +else + echo "No WinCE image" ; +fi diff -u -r --new-file u-boot-1.1.2/board/bd2003/Makefile u-boot-1.1.2-neon/board/bd2003/Makefile --- u-boot-1.1.2/board/bd2003/Makefile 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/bd2003/Makefile 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,48 @@ + +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := bd2003.o flash.o +SOBJS := memsetup.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff -u -r --new-file u-boot-1.1.2/board/bd2003/memsetup.S u-boot-1.1.2-neon/board/bd2003/memsetup.S --- u-boot-1.1.2/board/bd2003/memsetup.S 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/bd2003/memsetup.S 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,64 @@ +/* + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * NOTE: I haven't clean this up considerably, just enough to get it + * running. See hal_platform_setup.h for the source. See + * board/cradle/memsetup.S for another PXA250 setup that is + * much cleaner. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#define BAUDRATE 115200 +#include +#include +#include +#include + +DRAM_SIZE: .long CFG_DRAM_SIZE + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + + +/* + * Memory setup + */ + +.globl memsetup +memsetup: + + mov r10, lr + + InitCS0_CS1 r0,sp + InitGPIO r0,sp + InitIC_Clocks r0,sp + InitUART r0,sp,UART_BASE,BAUDRATE + InitUART r0,sp,UART_BASE+0x600000,9600 + InitChangeCPUSpeed r0 + InitMemory r0,sp,r1 + + mov pc, lr diff -u -r --new-file u-boot-1.1.2/board/bd2003/u-boot.lds u-boot-1.1.2-neon/board/bd2003/u-boot.lds --- u-boot-1.1.2/board/bd2003/u-boot.lds 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/bd2003/u-boot.lds 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/pxa/start.o (.text) + cpu/pxa/ministart.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff -u -r --new-file u-boot-1.1.2/board/bd2003/u-bootmini.lds u-boot-1.1.2-neon/board/bd2003/u-bootmini.lds --- u-boot-1.1.2/board/bd2003/u-bootmini.lds 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/bd2003/u-bootmini.lds 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(StartUp) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/pxa/minidebug.o (.text) + cpu/pxa/ministart.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff -u -r --new-file u-boot-1.1.2/board/halogen/config.mk u-boot-1.1.2-neon/board/halogen/config.mk --- u-boot-1.1.2/board/halogen/config.mk 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/halogen/config.mk 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,4 @@ +#TEXT_BASE = 0xa1700000 +TEXT_BASE = 0xA1F00000 +#TEXT_BASE = 0 +PXALCD = 1 diff -u -r --new-file u-boot-1.1.2/board/halogen/.cvsignore u-boot-1.1.2-neon/board/halogen/.cvsignore --- u-boot-1.1.2/board/halogen/.cvsignore 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/halogen/.cvsignore 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,2 @@ +.depend + diff -u -r --new-file u-boot-1.1.2/board/halogen/flash.c u-boot-1.1.2-neon/board/halogen/flash.c --- u-boot-1.1.2/board/halogen/flash.c 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/halogen/flash.c 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,482 @@ +/* + * (C) Copyright 2001 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include "lcd.h" + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/* Board support for 1 or 2 flash devices */ +#define FLASH_PORT_WIDTH32 +#undef FLASH_PORT_WIDTH16 + +#ifdef FLASH_PORT_WIDTH16 +#define FLASH_PORT_WIDTH ushort +#define FLASH_PORT_WIDTHV vu_short +#define SWAP(x) __swab16(x) +#else +#define FLASH_PORT_WIDTH ulong +#define FLASH_PORT_WIDTHV vu_long +#define SWAP(x) __swab32(x) +#endif + +#define FPW FLASH_PORT_WIDTH +#define FPWV FLASH_PORT_WIDTHV + +#define mb() __asm__ __volatile__ ("" : : : "memory") + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size (FPW *addr, flash_info_t *info); +static int write_data (flash_info_t *info, ulong dest, FPW data); +static void flash_get_offsets (ulong base, flash_info_t *info); +void inline spin_wheel_init(ulong addr, ulong cnt); +void inline spin_wheel_done( int worked ); +void inline spin_wheel (ulong numleft); + +/*----------------------------------------------------------------------- + */ +ulong bases[] = {PHYS_FLASH_1,PHYS_FLASH_2,1}; +unsigned long flash_init (void) +{ + int i=0; + int j=0; + ulong size = 0; + ulong base; + + while (i < CFG_MAX_FLASH_BANKS) { + base = bases[j++]; + flash_info[i].start[0] = 0; + if (base & 1) break; + if (flash_get_size ((FPW *) base, &flash_info[i])) { + flash_get_offsets (base, &flash_info[i]); + size += flash_info[i].size; + i++; + } + else { +printf( "error reading flash size\n" ); + } + } + if (size>0) { + base = flash_info[0].start[0]; + // Protect monitor and environment sectors + flash_protect ( FLAG_PROTECT_SET, + base, + base + monitor_flash_len - 1, + &flash_info[0] ); + + flash_protect ( FLAG_PROTECT_SET, + base+CFG_ENV_OFFSET, + base+CFG_ENV_OFFSET + CFG_ENV_SIZE - 1, &flash_info[0] ); + } + + return size; +} + +/*----------------------------------------------------------------------- + */ +static void flash_get_offsets (ulong base, flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + return; + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); + info->protect[i] = 0; + } + } +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + printf ("INTEL "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F128J3A: + printf ("28F128J3A\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + return; +} + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size (FPW *addr, flash_info_t *info) +{ + volatile FPW value; + volatile unsigned long *mc = (unsigned long *)MEMORY_CONTROL_BASE; + unsigned long val = 1<<3; + + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + + if (((ulong)addr) > 0x14000000) return 0; + val = mc[(MSC0>>2) +(((ulong)addr)>>27)]; + if (((ulong)addr) & 0x04000000) val = val>>16; + if ( val & (1<<3)) return 0; //if 16 bit bus then return + + /* Write auto select command: read Manufacturer ID */ + addr[0x5555] = (FPW) 0x00AA00AA; + addr[0x2AAA] = (FPW) 0x00550055; + addr[0x5555] = (FPW) 0x00900090; + + mb (); + value = addr[0]; + + switch (value) { + + case (FPW) 0: + case (FPW) STM_MANUFACT: + case (FPW) INTEL_MANUFACT & 0xFF0000 : + case (FPW) INTEL_MANUFACT & 0x0000FF : + case (FPW) INTEL_MANUFACT: + info->flash_id = FLASH_MAN_INTEL; + break; + + default: +printf( "Invalid flash manufacturer %x\n", value ); + addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ + return (0); /* no or unknown flash */ + } + + mb (); + value = addr[1]; /* device ID */ + + switch (value) { + + case (FPW) 0: + case (FPW) INTEL_ID_28F128J3A & 0xFF0000 : + case (FPW) INTEL_ID_28F128J3A & 0x0000FF : + case (FPW) INTEL_ID_28F128J3A: + info->flash_id += FLASH_28F128J3A; + info->sector_count = 128; + info->size = 0x01000000; + break; /* => 16 MB x 1 */ + case (FPW) INTEL_ID_28F320J3A: + info->flash_id += FLASH_28F320J3A; + info->sector_count = 32 ; + info->size = 0x400000 ; + break; /* => 4 MB x 1 */ + default: +printf( "Unknown flash device %x\n", value ); + info->flash_id = FLASH_UNKNOWN; + break; + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf ("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ + + return (info->size); +} + + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong type, start, last; + int rcode = 0; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + type = (info->flash_id & FLASH_VENDMASK); + if ((type != FLASH_MAN_INTEL)) { + printf ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + start = get_timer (0); + last = start; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + char temp[80]; + FPWV *addr = (FPWV *) (info->start[sect]); + FPW status; + + sprintf (temp, "Erasing sector %2d ... \r", sect); + lcd_puts( temp ); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + *addr = (FPW) 0x00500050; /* clear status register */ + *addr = (FPW) 0x00200020; /* erase setup */ + *addr = (FPW) 0x00D000D0; /* erase confirm */ + + while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + *addr = (FPW) 0x00B000B0; /* suspend erase */ + *addr = (FPW) 0x00FF00FF; /* reset to read mode */ + rcode = 1; + break; + } + } + + *addr = 0x00500050; /* clear status register cmd. */ + *addr = 0x00FF00FF; /* resest to read mode */ + } + } + lcd_puts( "\r\n" ); + return rcode; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + * 4 - Flash not identified + */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong cp, wp; + FPW data; + int count, i, l, rc, port_width; + + rc = 0 ; + if (info->flash_id == FLASH_UNKNOWN) { + return 4; + } +/* get lower word aligned address */ +#ifdef FLASH_PORT_WIDTH16 + wp = (addr & ~1); + port_width = 2; +#else + wp = (addr & ~3); + port_width = 4; +#endif + + spin_wheel_init(addr,cnt); + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + for (; i < port_width && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt == 0 && i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + if ((rc = write_data (info, wp, SWAP (data))) != 0) { + goto out; + } + wp += port_width; + } + + /* + * handle word aligned part + */ + count = 0; + while (cnt >= port_width) { + data = 0; + for (i = 0; i < port_width; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_data (info, wp, SWAP (data))) != 0) { + goto out; + } + wp += port_width; + cnt -= port_width; + if (count++ > 0x800) { + spin_wheel (cnt); + count = 0; + } + } + + if (cnt) { + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + rc = write_data (info, wp, SWAP (data)); + } + +out: + spin_wheel_done(0 == rc); + return rc ; +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_data (flash_info_t *info, ulong dest, FPW data) +{ + FPWV *addr = (FPWV *) dest; + FPW old = *addr ; + ulong status; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((old & data) != data) { + printf ("not erased at %08lx (%lx)\n", (ulong) addr, old); + return (2); + } + + if( old != data ) + { + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + *addr = (FPW) 0x00400040; /* write setup */ + *addr = data; + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + /* wait while polling the status register */ + while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { + if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) { + *addr = (FPW) 0x00FF00FF; /* restore read mode */ + return (1); + } + } + *addr = (FPW) 0x00FF00FF; /* restore read mode */ + } /* need to program? */ + + + return (0); +} + +void inline spin_wheel_init(ulong addr, ulong cnt) +{ + char temp[80]; + sprintf( temp, + "\nprogramming flash\n" + "%08lx->%08lx\n" + " ", addr, cnt ); + lcd_puts( temp ); +} + +void inline spin_wheel_done( int worked ) +{ + if( worked ) + spin_wheel(0); + lcd_puts( worked ? "\ncompleted.\n" : "\nfailed!\n" ); +} + +void inline spin_wheel( ulong numleft ) +{ + char temp[40]; + sprintf( temp, "\r %08lx", numleft ); + lcd_puts( temp ); +} diff -u -r --new-file u-boot-1.1.2/board/halogen/halogen.c u-boot-1.1.2-neon/board/halogen/halogen.c --- u-boot-1.1.2/board/halogen/halogen.c 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/halogen/halogen.c 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,94 @@ +/* + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* ------------------------------------------------------------------------- */ +/* + * LCD panel declarations + */ + +vidinfo_t panel_info = { + vl_col: 1024, //this is corrected in SetPanelInfo + vl_row: 768, + vl_bpix: LCD_BPP, + vl_lcd_line_length: (320 * NBITS(LCD_BPP) ) >> 3 +}; + +void disable_lcd_panel( void ) +{ +} + + +/* ------------------------------------------------------------------------- */ + + +/* + * Miscelaneous platform dependent initialisations + */ + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + /* arch number of Neon Board */ + gd->bd->bi_arch_number = MACH_TYPE_HALOGEN ; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0xa0000100; + + return 0; +} + +int board_late_init(void) +{ + setenv("stdout", "serial"); + setenv("stderr", "serial"); + return 0; +} + + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} diff -u -r --new-file u-boot-1.1.2/board/halogen/init.script u-boot-1.1.2-neon/board/halogen/init.script --- u-boot-1.1.2/board/halogen/init.script 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/halogen/init.script 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,42 @@ +if fatload mmc 0 a0008000 logo*.bmp ; then + bmp info a0008000 ; + bmp display a0008000 ; +else + lecho "No logo present" ; +fi + +if fatload mmc 0 a2000000 uim* ; then + lecho 'load Linux' + if fatload mmc 0 a2200000 mmcinitrd* ; then + echo 'using initrd' ; + lecho "Booting Linux" + set bootargs root=/dev/ram0 console=ttyS0,115200 debug=7 mtdparts=phys_mapped_flash:1024k(armboot),256k(params),-(rootfs1) + bootm a2000000 a2200000 + else + echo 'testing cramfs img' ; + if fatload mmc 0 a2200000 cramfs* ; then + if cmp.b 00140000 a2200000 $filesize ; then + echo 'cramfs images match' ; + else + lecho 'filesystems differ...' ; + protect off all ; + erase 00140000 01ffffff ; + cp.b a2200000 00140000 $filesize ; + fi + + set bootargs console=ttyS0,115200 debug=7 mtdparts=phys_mapped_flash:1024k(armboot),256k(params),-(rootfs1) root=/dev/mtdblock3 rootfstype=cramfs + lecho "Booting Linux" + bootm a2000000 + fi + fi +else + echo "No Linux kernel" ; +fi + +lecho 'No Linux, try CE' + +if fatload mmc 0 A0030000 nk*.nb0 ; then + g A0030000 ; +else + echo "No WinCE image" ; +fi diff -u -r --new-file u-boot-1.1.2/board/halogen/Makefile u-boot-1.1.2-neon/board/halogen/Makefile --- u-boot-1.1.2/board/halogen/Makefile 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/halogen/Makefile 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,48 @@ + +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := halogen.o flash.o +SOBJS := memsetup.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff -u -r --new-file u-boot-1.1.2/board/halogen/memsetup.S u-boot-1.1.2-neon/board/halogen/memsetup.S --- u-boot-1.1.2/board/halogen/memsetup.S 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/halogen/memsetup.S 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,64 @@ +/* + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * NOTE: I haven't clean this up considerably, just enough to get it + * running. See hal_platform_setup.h for the source. See + * board/cradle/memsetup.S for another PXA250 setup that is + * much cleaner. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#define BAUDRATE 115200 +#include +#include +#include +#include + +DRAM_SIZE: .long CFG_DRAM_SIZE + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + + +/* + * Memory setup + */ + +.globl memsetup +memsetup: + + mov r10, lr + + InitCS0_CS1 r0,sp + InitGPIO r0,sp + InitIC_Clocks r0,sp + InitUART r0,sp,UART_BASE,BAUDRATE + InitUART r0,sp,UART_BASE+0x600000,9600 + InitChangeCPUSpeed r0 + InitMemory r0,sp,r1 + + mov pc, lr diff -u -r --new-file u-boot-1.1.2/board/halogen/u-boot.lds u-boot-1.1.2-neon/board/halogen/u-boot.lds --- u-boot-1.1.2/board/halogen/u-boot.lds 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/halogen/u-boot.lds 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/pxa/start.o (.text) + cpu/pxa/ministart.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff -u -r --new-file u-boot-1.1.2/board/halogen/u-bootmini.lds u-boot-1.1.2-neon/board/halogen/u-bootmini.lds --- u-boot-1.1.2/board/halogen/u-bootmini.lds 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/halogen/u-bootmini.lds 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(StartUp) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/pxa/minidebug.o (.text) + cpu/pxa/ministart.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff -u -r --new-file u-boot-1.1.2/board/neon/config.mk u-boot-1.1.2-neon/board/neon/config.mk --- u-boot-1.1.2/board/neon/config.mk 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/neon/config.mk 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,4 @@ +#TEXT_BASE = 0xa1700000 +TEXT_BASE = 0xA1F00000 +#TEXT_BASE = 0 +#PXALCD = 1 diff -u -r --new-file u-boot-1.1.2/board/neon/.cvsignore u-boot-1.1.2-neon/board/neon/.cvsignore --- u-boot-1.1.2/board/neon/.cvsignore 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/neon/.cvsignore 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,2 @@ +.depend + diff -u -r --new-file u-boot-1.1.2/board/neon/flash.c u-boot-1.1.2-neon/board/neon/flash.c --- u-boot-1.1.2/board/neon/flash.c 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/neon/flash.c 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,482 @@ +/* + * (C) Copyright 2001 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include "lcd.h" + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/* Board support for 1 or 2 flash devices */ +#define FLASH_PORT_WIDTH32 +#undef FLASH_PORT_WIDTH16 + +#ifdef FLASH_PORT_WIDTH16 +#define FLASH_PORT_WIDTH ushort +#define FLASH_PORT_WIDTHV vu_short +#define SWAP(x) __swab16(x) +#else +#define FLASH_PORT_WIDTH ulong +#define FLASH_PORT_WIDTHV vu_long +#define SWAP(x) __swab32(x) +#endif + +#define FPW FLASH_PORT_WIDTH +#define FPWV FLASH_PORT_WIDTHV + +#define mb() __asm__ __volatile__ ("" : : : "memory") + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size (FPW *addr, flash_info_t *info); +static int write_data (flash_info_t *info, ulong dest, FPW data); +static void flash_get_offsets (ulong base, flash_info_t *info); +void inline spin_wheel_init(ulong addr, ulong cnt); +void inline spin_wheel_done( int worked ); +void inline spin_wheel (ulong numleft); + +/*----------------------------------------------------------------------- + */ +ulong bases[] = {PHYS_FLASH_1,PHYS_FLASH_2,1}; +unsigned long flash_init (void) +{ + int i=0; + int j=0; + ulong size = 0; + ulong base; + + while (i < CFG_MAX_FLASH_BANKS) { + base = bases[j++]; + flash_info[i].start[0] = 0; + if (base & 1) break; + if (flash_get_size ((FPW *) base, &flash_info[i])) { + flash_get_offsets (base, &flash_info[i]); + size += flash_info[i].size; + i++; + } + else { +printf( "error reading flash size\n" ); + } + } + if (size>0) { + base = flash_info[0].start[0]; + // Protect monitor and environment sectors + flash_protect ( FLAG_PROTECT_SET, + base, + base + monitor_flash_len - 1, + &flash_info[0] ); + + flash_protect ( FLAG_PROTECT_SET, + base+CFG_ENV_OFFSET, + base+CFG_ENV_OFFSET + CFG_ENV_SIZE - 1, &flash_info[0] ); + } + + return size; +} + +/*----------------------------------------------------------------------- + */ +static void flash_get_offsets (ulong base, flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + return; + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); + info->protect[i] = 0; + } + } +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + printf ("INTEL "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F128J3A: + printf ("28F128J3A\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + return; +} + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size (FPW *addr, flash_info_t *info) +{ + volatile FPW value; + volatile unsigned long *mc = (unsigned long *)MEMORY_CONTROL_BASE; + unsigned long val = 1<<3; + + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + + if (((ulong)addr) > 0x14000000) return 0; + val = mc[(MSC0>>2) +(((ulong)addr)>>27)]; + if (((ulong)addr) & 0x04000000) val = val>>16; + if ( val & (1<<3)) return 0; //if 16 bit bus then return + + /* Write auto select command: read Manufacturer ID */ + addr[0x5555] = (FPW) 0x00AA00AA; + addr[0x2AAA] = (FPW) 0x00550055; + addr[0x5555] = (FPW) 0x00900090; + + mb (); + value = addr[0]; + + switch (value) { + + case (FPW) 0: + case (FPW) STM_MANUFACT: + case (FPW) INTEL_MANUFACT & 0xFF0000 : + case (FPW) INTEL_MANUFACT & 0x0000FF : + case (FPW) INTEL_MANUFACT: + info->flash_id = FLASH_MAN_INTEL; + break; + + default: +printf( "Invalid flash manufacturer %x\n", value ); + addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ + return (0); /* no or unknown flash */ + } + + mb (); + value = addr[1]; /* device ID */ + + switch (value) { + + case (FPW) 0: + case (FPW) INTEL_ID_28F128J3A & 0xFF0000 : + case (FPW) INTEL_ID_28F128J3A & 0x0000FF : + case (FPW) INTEL_ID_28F128J3A: + info->flash_id += FLASH_28F128J3A; + info->sector_count = 128; + info->size = 0x02000000; + break; /* => 16 MB x 2 */ + case (FPW) INTEL_ID_28F320J3A: + info->flash_id += FLASH_28F320J3A; + info->sector_count = 32 ; + info->size = 0x800000 ; + break; /* => 4 MB x 2 */ + default: +printf( "Unknown flash device %x\n", value ); + info->flash_id = FLASH_UNKNOWN; + break; + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf ("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ + + return (info->size); +} + + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong type, start, last; + int rcode = 0; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + type = (info->flash_id & FLASH_VENDMASK); + if ((type != FLASH_MAN_INTEL)) { + printf ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + start = get_timer (0); + last = start; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + char temp[80]; + FPWV *addr = (FPWV *) (info->start[sect]); + FPW status; + + sprintf (temp, "Erasing sector %2d ... \r", sect); + lcd_puts( temp ); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + *addr = (FPW) 0x00500050; /* clear status register */ + *addr = (FPW) 0x00200020; /* erase setup */ + *addr = (FPW) 0x00D000D0; /* erase confirm */ + + while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + *addr = (FPW) 0x00B000B0; /* suspend erase */ + *addr = (FPW) 0x00FF00FF; /* reset to read mode */ + rcode = 1; + break; + } + } + + *addr = 0x00500050; /* clear status register cmd. */ + *addr = 0x00FF00FF; /* resest to read mode */ + } + } + lcd_puts( "\r\n" ); + return rcode; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + * 4 - Flash not identified + */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong cp, wp; + FPW data; + int count, i, l, rc, port_width; + + rc = 0 ; + if (info->flash_id == FLASH_UNKNOWN) { + return 4; + } +/* get lower word aligned address */ +#ifdef FLASH_PORT_WIDTH16 + wp = (addr & ~1); + port_width = 2; +#else + wp = (addr & ~3); + port_width = 4; +#endif + + spin_wheel_init(addr,cnt); + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + for (; i < port_width && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt == 0 && i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + if ((rc = write_data (info, wp, SWAP (data))) != 0) { + goto out; + } + wp += port_width; + } + + /* + * handle word aligned part + */ + count = 0; + while (cnt >= port_width) { + data = 0; + for (i = 0; i < port_width; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_data (info, wp, SWAP (data))) != 0) { + goto out; + } + wp += port_width; + cnt -= port_width; + if (count++ > 0x800) { + spin_wheel (cnt); + count = 0; + } + } + + if (cnt) { + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + rc = write_data (info, wp, SWAP (data)); + } + +out: + spin_wheel_done(0 == rc); + return rc ; +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_data (flash_info_t *info, ulong dest, FPW data) +{ + FPWV *addr = (FPWV *) dest; + FPW old = *addr ; + ulong status; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((old & data) != data) { + printf ("not erased at %08lx (%lx)\n", (ulong) addr, old); + return (2); + } + + if( old != data ) + { + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + *addr = (FPW) 0x00400040; /* write setup */ + *addr = data; + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + /* wait while polling the status register */ + while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { + if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) { + *addr = (FPW) 0x00FF00FF; /* restore read mode */ + return (1); + } + } + *addr = (FPW) 0x00FF00FF; /* restore read mode */ + } /* need to program? */ + + + return (0); +} + +void inline spin_wheel_init(ulong addr, ulong cnt) +{ + char temp[80]; + sprintf( temp, + "\nprogramming flash\n" + "%08lx->%08lx\n" + " ", addr, cnt ); + lcd_puts( temp ); +} + +void inline spin_wheel_done( int worked ) +{ + if( worked ) + spin_wheel(0); + lcd_puts( worked ? "\ncompleted.\n" : "\nfailed!\n" ); +} + +void inline spin_wheel( ulong numleft ) +{ + char temp[40]; + sprintf( temp, "\r %08lx", numleft ); + lcd_puts( temp ); +} diff -u -r --new-file u-boot-1.1.2/board/neon/init.script u-boot-1.1.2-neon/board/neon/init.script --- u-boot-1.1.2/board/neon/init.script 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/neon/init.script 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,42 @@ +if fatload mmc 0 a0008000 logo*.bmp ; then + bmp info a0008000 ; + bmp display a0008000 ; +else + lecho "No logo present" ; +fi + +if fatload mmc 0 a2000000 uim* ; then + lecho 'load Linux' + if fatload mmc 0 a2200000 mmcinitrd* ; then + echo 'using initrd' ; + lecho "Booting Linux" + set bootargs root=/dev/ram0 console=ttyS0,115200 debug=7 mtdparts=phys_mapped_flash:1024k(armboot),256k(params),-(rootfs1) + bootm a2000000 a2200000 + else + echo 'testing cramfs img' ; + if fatload mmc 0 a2200000 cramfs* ; then + if cmp.b 00140000 a2200000 $filesize ; then + echo 'cramfs images match' ; + else + lecho 'filesystems differ...' ; + protect off all ; + erase 00140000 01ffffff ; + cp.b a2200000 00140000 $filesize ; + fi + + set bootargs console=ttyS0,115200 debug=7 mtdparts=phys_mapped_flash:1024k(armboot),256k(params),-(rootfs1) root=/dev/mtdblock3 rootfstype=cramfs + lecho "Booting Linux" + bootm a2000000 + fi + fi +else + echo "No Linux kernel" ; +fi + +lecho 'No Linux, try CE' + +if fatload mmc 0 A0030000 nk*.nb0 ; then + g A0030000 ; +else + echo "No WinCE image" ; +fi diff -u -r --new-file u-boot-1.1.2/board/neon/Makefile u-boot-1.1.2-neon/board/neon/Makefile --- u-boot-1.1.2/board/neon/Makefile 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/neon/Makefile 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,48 @@ + +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := neon.o flash.o rtc_M41T81S.o +SOBJS := memsetup.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff -u -r --new-file u-boot-1.1.2/board/neon/memsetup.S u-boot-1.1.2-neon/board/neon/memsetup.S --- u-boot-1.1.2/board/neon/memsetup.S 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/neon/memsetup.S 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,64 @@ +/* + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * NOTE: I haven't clean this up considerably, just enough to get it + * running. See hal_platform_setup.h for the source. See + * board/cradle/memsetup.S for another PXA250 setup that is + * much cleaner. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#define BAUDRATE 115200 +#include +#include +#include +#include + +DRAM_SIZE: .long CFG_DRAM_SIZE + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + + +/* + * Memory setup + */ + +.globl memsetup +memsetup: + + mov r10, lr + + InitCS0_CS1 r0,sp + InitGPIO r0,sp + InitIC_Clocks r0,sp + InitUART r0,sp,UART_BASE,BAUDRATE + InitUART r0,sp,UART_BASE+0x600000,9600 + InitChangeCPUSpeed r0 + InitMemory r0,sp,r1 + + mov pc, lr diff -u -r --new-file u-boot-1.1.2/board/neon/neon.c u-boot-1.1.2-neon/board/neon/neon.c --- u-boot-1.1.2/board/neon/neon.c 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/neon/neon.c 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,615 @@ +/* + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define FASTCLOCK1 0x291A0201 //faster pixel clock: P2S = 1, P2 = 9 (/6) ( panel source 1, divide by 6) + // V2S = 1, V2 = 10 (/12) ( crt source 1, divide by 12) + // M2S = 0, MR = 2 (/4) (sdram source 1, divide by 4) + // M1S = 0, MR = 1 (/2) + // miscTimReg[5:4] == 0 (336 MHz) + // / 6 == 56 MHz + // +#define FASTCLOCK2 0x291A0201 +#define FASTCLOCK3 0x00080800 + +#define SLOWCLOCK1 0x0A1A0201 //slow pixel clock: P2S = 0, P2 = 10 (/12) ( panel source 0, divide by 12) + // V2S = 1, V2 = 10 (/12) ( crt source 1, divide by 12) + // M2S = 0, MR = 2 (/4) (sdram source 1, divide by 4) + // M1S = 0, MR = 1 (/2) + // miscTimReg[5:4] == 0 (288 MHz) + // / 12 == 24 MHz + // +#define SLOWCLOCK2 0x0A1A0A09 +#define SLOWCLOCK3 0x00090900 + +unsigned long const fbStart = 0x0C000000 ; +unsigned long const fbMax = 0x00800000 ; // + +unsigned long const mmioStart = 0xFE00000 ; +unsigned long const mmioLength = 0x00200000 ; +unsigned long const lcdPaletteRegs = 0xFE80400 ; +unsigned long const crtPaletteRegs = 0xFE80C00 ; +unsigned long paletteRegs = 0xFE80400 ; + +const unsigned int sm501_list1[]={ + 0x0FE00000, + 0x00100000,0x00001002,0x00000000,0x00000000,0x07F127C0,0x05146732,0x40715128,0x00000000, + 0x00000000,0x00180002,0x00000002,0x00000002,0x00000000,0x00000000,0x0000001F,0x291A0201, + 0x0000001F,0x291A0201,0x00000007,0x291A0201,0x00018000,0x00000000,0x00000000,0x00000000, + 0x050100A0,0x00000000,0x00080800}; + +const unsigned int sm501_list2[]={ 0x0fe80000, +/* 80000 dispctrl */ 0x0F013100, // 0f0d0105 +/* 80004 pan */ 0x00000000, +/* 80008 colorkey */ 0x00000000, +/* 8000C fbaddr */ 0x00000000, +/* 80010 offsetww */ 0x00000000, // ((LCD_XRES)<<16)+(LCD_XRES), +/* 80014 fbwidth */ 0x00000000, // (LCD_XRES<<16), +/* 80018 fbheight */ 0x00000000, // (LCD_YRES<<16), +/* 8001C tllocate */ 0x00000000, +/* 80020 brlocate */ 0x00000000, // ((LCD_YRES-1)<<16)+(LCD_XRES-1), +/* 80024 htotal */ 0x00000000, // ((LCD_BEGIN_OF_LINE_WAIT_COUNT+ +/* */ // LCD_XRES+ +/* */ // LCD_END_OF_LINE_WAIT_COUNT+ +/* */ // LCD_HORIZONTAL_SYNC_PULSE_WIDTH-1)<<16) +/* */ // +(LCD_XRES-1), +/* 80028 hsync */ 0x00000000, // (LCD_HORIZONTAL_SYNC_PULSE_WIDTH<<16) +/* */ // +(LCD_XRES+LCD_BEGIN_OF_LINE_WAIT_COUNT-1), +/* 8002C vtotal */ 0x00000000, // ((LCD_BEGIN_FRAME_WAIT_COUNT+ +/* */ // LCD_YRES+ +/* */ // LCD_END_OF_FRAME_WAIT_COUNT+ +/* */ // LCD_VERTICAL_SYNC_PULSE_WIDTH-1)<<16) +/* */ // +(LCD_YRES-1), +/* 80030 vsync */ 0x00000000, // (LCD_VERTICAL_SYNC_PULSE_WIDTH<<16) +/* */ // +(LCD_YRES+LCD_BEGIN_FRAME_WAIT_COUNT-1) +}; + +static unsigned const miscCtrl = 0x00000004 ; +static unsigned const curClockReg = 0x0000003C ; +static unsigned const pm0ClockReg = 0x00000044 ; +static unsigned const pm1ClockReg = 0x0000004C ; +static unsigned const miscTimReg = 0x00000068 ; + +static unsigned const dispctrlReg = 0x00080000 ; +static unsigned const offsetReg = 0x00080010 ; // ((xres)<<16)+(xres), +static unsigned const fbWidthReg = 0x00080014 ; // (xres<<16), +static unsigned const fbHeightReg = 0x00080018 ; // (yres<<16), +static unsigned const brLocateReg = 0x00080020 ; // ((yres-1)<<16)+(xres-1), +static unsigned const hTotalReg = 0x00080024 ; // (left_margin+xres+right_margin+hsync_len-1) << 16 + // + xres +static unsigned const hSyncReg = 0x00080028 ; // (hsync_len<<16) + (xres+left_margin-1) +static unsigned const vTotalReg = 0x0008002c ; // (top_margin+yres+lower_margin+vsync_len-1) << 16 + // + yres-1 +static unsigned const vSyncReg = 0x00080030 ; // (vsync_len<<16) + yres+top_margin-1 + +/* + * CRT regs + */ +static unsigned const crtctrlReg = 0x00080200 ; +static unsigned const crtFbAddrReg = 0x00080204 ; +static unsigned const crtFbOffsReg = 0x00080208 ; +static unsigned const crtFbHTotReg = 0x0008020C ; +static unsigned const crtFbHSynReg = 0x00080210 ; +static unsigned const crtFbVTotReg = 0x00080214 ; +static unsigned const crtFbVSynReg = 0x00080218 ; + +#define DISPCRTL_ENABLE 4 + +#define CLOCK_ACTIVEHIGH 0 +#define CLOCK_ACTIVELOW (1<<14) +#define CLOCK_ACTIVEMASK (1<<14) + +#define LCDTYPE_TFT 0 +#define LCDTYPE_STN12 (3<<18) +#define LCDTYPE_MASK (3<<18) + +#define READREG( addr ) *( (unsigned long volatile *)((addr)+mmioStart) ) +#define STUFFREG( addr, value ) *( (unsigned long volatile *)((addr)+mmioStart) ) = (value) + +const unsigned int sm501_list3[]={0x0fe80040, + 0x00010000,0x0703E360,0x00200400,0x00A81330,0x0385009C,0x02200240,0x00000000,0x00000000, + 0x00EDEDED,0x089C4040,0x0031E3B0}; + +const unsigned int sm501_list4[]={0x0fe80080, + 0x00010000,0x05121880,0x28800C00,0x00108030,0x02090040,0x00840050,0x00000000,0x00000000, + 0x0141A200,0x020A0802,0x0088D109,0x20820040,0x10800000,0x30029200,0x00080821,0x01010400, + 0x44000120,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000, + 0x00000000,0x00000000,0x00000000,0x00000000}; + +const unsigned int sm501_list5[]={0x0fe800f0, + 0x0070F800,0x00780140,0x00000000,0x0000FFFF,0x00010000}; + +struct itemEntry { + const int cnt; + const unsigned int* p; +}; + +const struct itemEntry lists[] = { + {sizeof(sm501_list1)>>2,sm501_list1}, + {sizeof(sm501_list2)>>2,sm501_list2}, + {sizeof(sm501_list3)>>2,sm501_list3}, + {sizeof(sm501_list4)>>2,sm501_list4}, + {sizeof(sm501_list5)>>2,sm501_list5} +}; + +int lcd_color_fg; +int lcd_color_bg; + +void *lcd_base; /* Start of framebuffer memory */ +void *lcd_console_address; /* Start of console buffer */ + +short console_col; +short console_row; + + +ulong calc_fbsize (void) +{ + if( cur_lcd_panel ) + { + int line_length = (cur_lcd_panel->xres * NBITS (LCD_BPP)) / 8; + return ( cur_lcd_panel->yres * line_length ) + PAGE_SIZE ; + } + else + return 0 ; +} + +void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue) +{ + unsigned long *const palette = (unsigned long *)paletteRegs ; + unsigned long const rgb = ((unsigned long)red ) << 16 + | ((unsigned long)green ) << 8 + | blue ; + palette[regno] = rgb ; +} + +void lcd_ctrl_init (void *lcdbase) +{ + unsigned short *fbMem; + char *panelName ; + + unsigned long val=0; + const struct itemEntry* l = lists; + int count = sizeof(lists)/sizeof(struct itemEntry); + printf( "sm501 init start\n"); + + while (count) { + int cnt = l->cnt-1; + const unsigned long* p = (unsigned long*)l->p; + volatile unsigned int* reg = (unsigned int*)(*p++); +// printf( "set regs: %p, cnt:%x, from %p, l:%p\n", reg, cnt, p,l ); +// while (reg==0) { +// } + + while (cnt) { + val = *p++; +// printf( "set reg: %p = %x from %p\n", reg, val, p ); + *reg++ = val; + cnt--; + } + count--; + l++; + } +// printf( "sm501 init middle\n"); + + panelName = getenv( "panel" ); +// printf( "after getenv\n"); + if( panelName ) + { + struct lcd_panel_info_t const *panel ; + panel = find_lcd_panel( panelName ); + if( panel ) + { + printf( "panel %s found: %u x %u\n", panelName, panel->xres, panel->yres ); +// printf( "before set_lcd_panel\n"); + set_lcd_panel( panel ); +// printf( "after set_lcd_panel\n"); + } + else + printf( "panel %s not found\n", panelName ); + } + + fbMem = (unsigned short *)fbStart ; + lcd_base = fbMem ; + +/* +Settings for Hitachi 5.7 + PANEL_HORIZONTAL_TOTAL, 01c00160); + PANEL_HORIZONTAL_SYNC, 00400161); + PANEL_VERTICAL_TOTAL, 0x010800f0); + PANEL_VERTICAL_SYNC, 0x00020104); + +In bdlogo.bmp - offset 436 is pixel data + STUFFREG( hTotalReg, 0x01800140 ); + STUFFREG( hSyncReg, 0x0008014f ); + STUFFREG( vTotalReg, 0x010700F0 ); + STUFFREG( vSyncReg, 0x00020100 ); +*/ + printf( "lcd_ctrl_init exit\n"); +} + +void lcd_enable (void) +{ +} + +#define BIT29 (1<<29) + +static void setClockReg( unsigned reg, unsigned long value ) +{ + unsigned oldValue = READREG( reg ); + if( (oldValue & BIT29) != (value&BIT29) ) + { + oldValue = (oldValue & (~BIT29)) + | (value & BIT29); + STUFFREG( reg, oldValue ); + udelay(16000); + } + + if( oldValue != value ) + STUFFREG( reg, value ); +} + +vidinfo_t panel_info = { + vl_col: 320, //this is corrected in SetPanelInfo + vl_row: 240, + vl_bpix: LCD_BPP, + vl_lcd_line_length: (320 * NBITS(LCD_BPP) ) >> 3 +}; + +static void SetPanelInfo(struct lcd_panel_info_t const *panel) +{ + panel_info.vl_col = panel->xres; + panel_info.vl_row = panel->yres; + panel_info.vl_bpix = LCD_BPP; + panel_info.vl_lcd_line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) >> 3; + printf("panel: %ix%ix%i\n",panel_info.vl_col,panel_info.vl_row,(1<act_high ) + crtCtrl |= (3<<14); // horizontal and vertical phase + STUFFREG( crtFbAddrReg, 0 ); + STUFFREG( crtFbOffsReg, ((panel->xres)<<16)+(panel->xres) ); + STUFFREG( crtFbHTotReg, (( panel->left_margin + +panel->xres + +panel->right_margin + +panel->hsync_len - 1) << 16 ) + + panel->xres-1 ); + STUFFREG( crtFbHSynReg, (panel->hsync_len<<16)+ (panel->xres+panel->left_margin-1) ); + STUFFREG( crtFbVTotReg, (( panel->upper_margin + +panel->yres + +panel->lower_margin + +panel->vsync_len-1 ) << 16 ) + + panel->yres-1 ); + STUFFREG( crtFbVSynReg,(panel->vsync_len<<16) + + panel->yres+panel->upper_margin-1 ); + STUFFREG( crtctrlReg, crtCtrl ); // enable + + reg = READREG( miscCtrl ) & ~0x1000 ; + STUFFREG( miscCtrl, reg ); +} + +void set_lcd_panel( struct lcd_panel_info_t const *panel ) +{ + unsigned long dispctrl = READREG( dispctrlReg ); + dispctrl &= ~(CLOCK_ACTIVEMASK|LCDTYPE_MASK); + if( !panel->act_high ) + dispctrl |= CLOCK_ACTIVELOW ; + else + dispctrl &= ~CLOCK_ACTIVEMASK ; + + if( !panel->active ) + dispctrl |= LCDTYPE_STN12 ; + else + dispctrl &= ~LCDTYPE_MASK ; + + if (panel->crt==0) dispctrl |= 4; + + STUFFREG( offsetReg, ((panel->xres)<<16)+(panel->xres) ); + STUFFREG( fbWidthReg, (panel->xres<<16) ); + STUFFREG( fbHeightReg, (panel->yres<<16) ); + STUFFREG( brLocateReg, ((panel->yres-1)<<16)+(panel->xres-1) ); + STUFFREG( hTotalReg, (( panel->left_margin + +panel->xres + +panel->right_margin + +panel->hsync_len - 1) << 16 ) + + panel->xres-1 ); + STUFFREG( hSyncReg, (panel->hsync_len<<16)+ (panel->xres+panel->left_margin-1) ); + STUFFREG( vTotalReg, (( panel->upper_margin + +panel->yres + +panel->lower_margin + +panel->vsync_len-1 ) << 16 ) + + panel->yres-1 ); + STUFFREG( vSyncReg, (panel->vsync_len<<16) + + panel->yres+panel->upper_margin-1 ); + + if( panel->pixclock < numClockRegs ) + { + unsigned long const *clk = clockRegs+(panel->pixclock*2); + setClockReg( curClockReg, *clk ); + setClockReg( pm0ClockReg, *clk++ ); + setClockReg( pm1ClockReg, *clk ); + } + else + { + int const isCRT = (0 != panel->crt); + int crt ; + + for( crt = 0 ; crt < 2 ; crt++ ) + { + unsigned long reg ; + unsigned long const *freq = frequencies[crt]; + unsigned const count = numFrequencies[crt]; + + unsigned long f, diffl, diffh ; + int i ; + unsigned long low, high ; + + // + // linear scan for closest frequency + // + for( i = 0 ; i < count ; i++, freq += ENTRIESPERFREQ ) + { + if( *freq > panel->pixclock ) + break; + } + + low = (i > 0) + ? freq[0-ENTRIESPERFREQ] + : 0 ; + diffl = panel->pixclock - low ; + + high = (i < count ) + ? *freq + : 0xFFFFFFFF ; + diffh = high - panel->pixclock ; + + if( diffh < diffl ) + { + f = high ; + } + else + { + f = low ; + freq-- ; + } + + printf( "pixclock == %lu, frequency %u/%u -> %lu\n", + panel->pixclock, low, high, f ); + + reg = READREG( curClockReg ) & ~(clockMasks[crt]); + + // Clock source + printf( "source %u, divisor %u\n", freq[1], freq[2] ); + reg |= freq[1]; + reg |= freq[2]; + + setClockReg( curClockReg, reg ); + setClockReg( pm0ClockReg, reg ); + setClockReg( pm1ClockReg, reg ); + + if( isCRT ) + { + paletteRegs = crtPaletteRegs ; + updateCRT( freq, panel ); + } + else + paletteRegs = lcdPaletteRegs ; + } + } + STUFFREG( dispctrlReg, dispctrl ); + cur_lcd_panel = panel ; + SetPanelInfo(panel); +} + +void disable_lcd_panel( void ) +{ + unsigned long dispctrl = READREG( dispctrlReg ); + unsigned long crtctrl = READREG( crtctrlReg ); + + dispctrl &= ~(DISPCRTL_ENABLE); + STUFFREG( dispctrlReg, dispctrl ); + + crtctrl &= ~(DISPCRTL_ENABLE); + STUFFREG( crtctrlReg, crtctrl ); +} + +/* ------------------------------------------------------------------------- */ + + +/* + * Miscelaneous platform dependent initialisations + */ + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + /* arch number of Neon Board */ + gd->bd->bi_arch_number = MACH_TYPE_BD2003 ; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0xa0000100; + + /* address of frame buffer */ + gd->fb_base = fbStart ; + + return 0; +} + +int board_late_init(void) +{ + setenv("stdout", "serial"); + setenv("stderr", "serial"); + return 0; +} + + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} diff -u -r --new-file u-boot-1.1.2/board/neon/rtc_M41T81S.c u-boot-1.1.2-neon/board/neon/rtc_M41T81S.c --- u-boot-1.1.2/board/neon/rtc_M41T81S.c 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/neon/rtc_M41T81S.c 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,663 @@ +/* + * M41T81S: + * + * This module defines a single 'rtc' command to read/write or + * test the ST Micro Real Time Clock attached to the SM-501 + * I2C pins. + * + * If called with no parameters, it will display the current time + * to the console device and set the 'time' environment variable. + * + * If called with a single parameter of "test", it will read the + * current time, wait a second and read the current time again. + * It will return success (zero) if the RTC time appears to tick + * by 1 second. + * + * If called with one or two parameters that appear to fit an + * ISO 8601 time format (i.e. YYYY-MM-DD HH:MM:SS.00 ), it will + * set the date and time. + * + * Copyright (c) Boundary Devices, 2006 + * + */ +#include "sm501.h" +#include +#include +#include +#include +#include + +int WriteI2C(int bVal); +int ReadI2C(int ack); +int I2CStart(int bSlaveAddress); +void I2CStop(void); +void I2CInit(void); + +////////////////////////////////////////////////////////// + +#define SM501_GPIO_DATA 0x10000 +#define SM501_GPIO_DIR 0x10008 + +#define INPUT 0 +#define OUTPUT 1 + +#define I2C_CLK 46 +#define I2C_DATA 47 +#define GPBIT_MASK(bitnum) (1<<(bitnum&0x1f)) +#define GPBIT_TEST(bitnum) ( (ReadReg(SM501_GPIO_DATA + ((bitnum>>5)<<2))) & (1<<(bitnum&0x1f)) ) +#define GPBIT_TESTBIT(c,bitnum) ( c & (1<<(bitnum&0x1f)) ) +#define GPBIT_SET(x,bitnum,value) ( (value) ? ((x) | (1<<(bitnum&0x1f))) : ((x) & ~(1<<(bitnum&0x1f))) ) + +//0.400 Mhz protocol = 1/.4 uSec = 10/4 uSec = 2.5 uSec +//4 should be safe +#define I2CWait 4 +#define LongBusWait 8 +#define StartBusWait 12 + +typedef struct { + unsigned short wYear; + unsigned short wMonth; + unsigned short wDayOfWeek; + unsigned short wDay; + unsigned short wHour; + unsigned short wMinute; + unsigned short wSecond; + unsigned short wMilliseconds; +} SYSTEMTIME ; + +typedef SYSTEMTIME *LPSYSTEMTIME ; + +void I2CInit(void) +{ + int i; + + for(i=0; i<9; i++) + { + I2CStop(); + } +} + + +#define ReadReg(reg) READ_SM501_REG(reg) +#define WriteReg(reg,data) STUFF_SM501_REG((reg), (data)) + +void SetVal_ClkData(int clk,int data) +{ +#if (I2C_DATA>>5)==(I2C_CLK>>5) + ulong c = ReadReg( SM501_GPIO_DATA + ((I2C_DATA>>5)<<2) ); + c = GPBIT_SET(c, I2C_DATA, data); + c = GPBIT_SET(c, I2C_CLK, clk); + WriteReg(SM501_GPIO_DATA + ((I2C_DATA>>5)<<2), c); +#else + ulong c = ReadReg( SM501_GPIO_DATA + ((I2C_DATA>>5)<<2) ); + c = GPBIT_SET(c, I2C_DATA, data); + WriteReg(SM501_GPIO_DATA + ((I2C_DATA>>5)<<2), c); + + c = ReadReg( SM501_GPIO_DATA + ((I2C_CLK>>5)<<2) ); + c = GPBIT_SET(c, I2C_CLK, clk); + WriteReg(SM501_GPIO_DATA + ((I2C_CLK>>5)<<2), c); +#endif +} + +void SetDir_ClkData(int clk,int data) +{ + ulong c,c1; +#if (I2C_DATA>>5)==(I2C_CLK>>5) + c = ReadReg( SM501_GPIO_DIR + ((I2C_CLK>>5)<<2) ); + if (clk==OUTPUT) { + //will be low, and can then change data + c1 = GPBIT_SET(c, I2C_CLK, OUTPUT); + if (c!=c1) WriteReg( SM501_GPIO_DIR + ((I2C_CLK>>5)<<2), c1); + c = GPBIT_SET(c1, I2C_DATA, data); + } else { + //clk might be low currently, so change data 1st + c1 = GPBIT_SET(c, I2C_DATA, data); + if (c!=c1) WriteReg( SM501_GPIO_DIR + ((I2C_DATA>>5)<<2), c1); + c = GPBIT_SET(c1, I2C_CLK, INPUT); + } + if (c!=c1) WriteReg( SM501_GPIO_DIR + ((I2C_CLK>>5)<<2), c); +#else + if (clk==OUTPUT) { + //will be low, and can then change data + c = ReadReg( SM501_GPIO_DIR + ((I2C_CLK>>5)<<2) ); + c1 = GPBIT_SET(c, I2C_CLK, OUTPUT); + if (c!=c1) WriteReg( SM501_GPIO_DIR + ((I2C_CLK>>5)<<2), c1); + + c1 = ReadReg( SM501_GPIO_DIR + ((I2C_DATA>>5)<<2) ); + c = GPBIT_SET(c1, I2C_DATA, data); + if (c!=c1) WriteReg( SM501_GPIO_DIR + ((I2C_DATA>>5)<<2), c); + } else { + //clk might be low currently, so change data 1st + c = ReadReg( SM501_GPIO_DIR + ((I2C_DATA>>5)<<2) ); + c1 = GPBIT_SET(c, I2C_DATA, data); + if (c!=c1) WriteReg( SM501_GPIO_DIR + ((I2C_DATA>>5)<<2), c1); + + c1 = ReadReg( SM501_GPIO_DIR + ((I2C_CLK>>5)<<2) ); + c = GPBIT_SET(c1, I2C_CLK, INPUT); + if (c!=c1) c1WriteReg( SM501_GPIO_DIR + ((I2C_CLK>>5)<<2), c); + } +#endif +} +void SetDir_Clk(int clk) +{ + ulong c = ReadReg( SM501_GPIO_DIR + ((I2C_CLK>>5)<<2) ); + c = GPBIT_SET(c, I2C_CLK, clk); + WriteReg( SM501_GPIO_DIR + ((I2C_CLK>>5)<<2), c); +} + +void I2CStop() +{ + SetDir_Clk(OUTPUT); //low clock + udelay(I2CWait); + SetDir_ClkData(OUTPUT,OUTPUT); //low clock, low data + udelay(I2CWait); + + //Drive Write SCL High + SetDir_Clk(INPUT); //high clock + udelay(I2CWait); + + // Drive Write SDA High + SetDir_ClkData(INPUT,INPUT); //transition on data from low to high while clock is high is a stop control signal + udelay(LongBusWait); + +} + + +//return 0 for success +int WriteI2C(int bVal) +{ + + int mask; + int i; + + // Enable Write SDA and SCL, and Drv SCL low + SetDir_Clk(OUTPUT); //clock low + udelay(I2CWait); //hold time + + for (mask=0x80; mask; mask>>=1) + { + SetDir_ClkData(OUTPUT, (bVal & mask) ? INPUT : OUTPUT); // Write data bits to SDA + udelay(LongBusWait); + + SetDir_Clk(INPUT); // Drv CLK High + udelay(I2CWait); + + SetDir_Clk(OUTPUT); // Drv CLK Low + udelay(I2CWait); //hold time after clock goes low + } + + + SetDir_ClkData(OUTPUT,INPUT); // Disable Write SDA + udelay(LongBusWait); //wait for acknowledge to be placed on SDA + SetDir_Clk(INPUT); // Drive Clock High + + // Read SDA, until SDA==0 + for (i=0; i<255; i++) { + udelay(LongBusWait); + if (!GPBIT_TEST(I2C_DATA)) { + SetDir_Clk(OUTPUT); // Drv Clk LOW + return 0; //success + } + } + + printf( "WriteI2C(%i) failed\n", bVal ); + return -1; +} + +int ReadI2C(int ack) +{ + int mask; + int byRet = 0; + +// SetVal_ClkData(0,0); + SetDir_Clk(OUTPUT); //clock low + udelay(I2CWait); //hold time + + SetDir_ClkData(OUTPUT,INPUT); //clock low, data input + for (mask=0x80; mask; mask>>=1) + { + // Disable Write SDA, Drive SCL to LOW + SetDir_Clk(OUTPUT); //clock low + udelay(LongBusWait); + + // Enable Write SCL, Drive SCL to HIGH + SetDir_Clk(INPUT); //clock high + udelay(I2CWait); + + // Read data bits from SDA + if (GPBIT_TEST(I2C_DATA)) byRet |= mask; //sample data bit + } + + SetDir_Clk(OUTPUT); //clock low + udelay(I2CWait); //let them stop driving data line + + if (ack) { + SetDir_ClkData(OUTPUT,OUTPUT); //clock low, data low for ack + } + udelay(I2CWait); + SetDir_Clk(INPUT); //clock high + udelay(I2CWait); //wait ack/noack phase + return byRet; + +} + +int I2CStart(int SlaveAddress) +{ + int ret; + udelay(I2CWait); + // Enable Write SDA and Write SCL, and drive them high + SetDir_ClkData(INPUT,INPUT); + SetVal_ClkData(0,0); //they float high anyway + udelay(StartBusWait); + + // Drive Data + SetDir_ClkData(INPUT,OUTPUT); //drive data low, (high to low transition on data, while clock high is start signal) + udelay(StartBusWait); + + ret = WriteI2C(SlaveAddress); + if (ret) { + printf( "I2CStart failed write of device address\n" ); + } + return ret; +} + +#define M41T81S_SlaveAddrWrite 0xd0 +#define M41T81S_SlaveAddrRead 0xd1 + +#define M_HUNDREDTHS 0 //00-99 BCD +#define M_SECONDS 1 //00-59 BCD, bit 7 ST (oscillator is stopped bit) +#define M_MINUTES 2 //00-59 BCD +#define M_HOURS 3 //high 2 bits are CENTURY, low 6 BCD 00-23 +#define M_WEEKDAY 4 //01-07 +#define M_DAY 5 //01-31 BCD +#define M_MONTH 6 //01-12 BCD +#define M_YEAR 7 //00-99 BCD +#define M_CALIBRATION 8 +#define M_WATCHDOG 9 +#define M_ALARM_MOTH 0x0a //01-12 BCD, high 3 bits enable +#define M_ALARM_DAY 0x0b //01-31 BCD. high 2 bits RPT4, RPT5 +#define M_ALARM_HOUR 0x0c //00-23 BCD, high 2 bits RPT3, HT +#define M_ALARM_MINUTES 0x0d //00-59 BCD, high bit RPT2 +#define M_ALARM_SECONDS 0x0e //00-59 BCD, high bit RPT1 +#define M_FLAGS 0x0f //bit 7(WDF), 6(AF), 4(BL), 2(OF) +#define M_SQW 0x13 //bit 7(RS3), 6(RS2), 5(RS1), 4(RS0) + +//M_FLAGS bit mask definitions +#define MF_WDF 0x80 //Watchdog flag +#define MF_AF 0x40 //Alarm flag +#define MF_BL 0x10 //Battery low +#define MF_OF 0x04 //Oscillator fail +static int bcd(int val,int low, int high) +{ + int tens = val>>4; + int ones = val & 0xf; + if ((tens > 9) || (ones > 9)) return -1; + val = (tens*10) + ones; + if ((val < low) || (val > high)) return -1; + return val; +} +static unsigned char toBcd(int val) +{ + int tens = val/10; + int rem = val - (tens*10); + if (tens >= 10) tens = tens % 10; + return (tens<<4) | rem; +} + +static int GetTime(LPSYSTEMTIME lpst) +{ + unsigned char b[M_YEAR+1]; + unsigned char * p = b; + unsigned char flags; + int i; + I2CInit(); //send a bunch of stops + + if (I2CStart(M41T81S_SlaveAddrWrite)) return -1; + if (WriteI2C(M_ALARM_HOUR)) return -1; + if (I2CStart(M41T81S_SlaveAddrRead)) return -1; + + b[0] = (unsigned char)ReadI2C(0); //read Halt bit + I2CStop(); + + if (b[0] & 0x40) { + //halted, restart it + if (I2CStart(M41T81S_SlaveAddrWrite)) return -1; + if (WriteI2C(M_ALARM_HOUR)) return -1; + if (WriteI2C(b[0] & ~0x40)) return -1; //clear Halt bit + I2CStop(); + } + + if (I2CStart(M41T81S_SlaveAddrWrite)) return -1; + if (WriteI2C(M_HUNDREDTHS)) return -1; + if (I2CStart(M41T81S_SlaveAddrRead)) return -1; + for (i=0; iwYear = ( (b[M_YEAR] > 0x99) || ((b[M_YEAR]&0xf) > 0x9) ) ? 0 : + (bcd(b[M_YEAR],0,99) + ( (b[M_HOURS]&0x40) ? 2100 : 2000)); + lpst->wMonth = bcd(b[M_MONTH],1,12); + lpst->wDayOfWeek = bcd(b[M_WEEKDAY],1,7); + lpst->wDay = bcd(b[M_DAY],1,31); + lpst->wHour = bcd(b[M_HOURS]&0x3f,0,23); + lpst->wMinute = bcd(b[M_MINUTES],0,59); + lpst->wSecond = bcd(b[M_SECONDS]&0x7f,0,59); + lpst->wMilliseconds = bcd(b[M_HUNDREDTHS],0,99)*10; + + if (b[M_SECONDS] & 0x80) { + //oscillator is stopped, restart it + if (I2CStart(M41T81S_SlaveAddrWrite)) return -1; + if (WriteI2C(M_SECONDS)) return -1; + if (WriteI2C(b[M_SECONDS] & ~0x80)) return -1; //clear stop bit + I2CStop(); + } + +/* + printf( "M41T81S_GetTime: Year:%u, Month:%u, Day:%u, Hour:%u, Minute:%u, second:%u, milli:%u\n", + lpst->wYear, lpst->wMonth,lpst->wDay, lpst->wHour, lpst->wMinute, lpst->wSecond,lpst->wMilliseconds ); +*/ + if (flags & MF_OF) { + if (I2CStart(M41T81S_SlaveAddrWrite)) return -1; + if (WriteI2C(M_FLAGS)) return -1; + if (WriteI2C(flags & ~MF_OF)) return -1; //clear oscillator failed bit + I2CStop(); + } + return 0; +} + +static int SetTime(LPSYSTEMTIME lpst) +{ + unsigned char b[M_YEAR+1]; + unsigned char flags; + int i; + if (lpst->wYear < 2004) { + lpst->wYear = 2004; //don't allow it to be set in the far past. + lpst->wMonth = 1; + lpst->wDay = 1; + lpst->wDayOfWeek = 4; //Thursday Jan. 1, 2004 + } + +/* printf( "M41T81S_SetTime: Year:%u, Month:%u, Day:%u, Hour:%u, Minute:%u, second:%u, milli:%u\n", + lpst->wYear, lpst->wMonth,lpst->wDay, lpst->wHour, lpst->wMinute, lpst->wSecond,lpst->wMilliseconds ); +*/ + b[M_HUNDREDTHS] = 0; //toBcd(lpst->wMilliseconds/10); + b[M_SECONDS] = toBcd(lpst->wSecond); + b[M_MINUTES] = toBcd(lpst->wMinute); + b[M_HOURS] = toBcd(lpst->wHour) | ( ((lpst->wYear % 200) >= 100) ? 0xc0 : 0x80); + b[M_WEEKDAY] = (unsigned char)lpst->wDayOfWeek; + b[M_DAY] = toBcd(lpst->wDay); + b[M_MONTH] = toBcd(lpst->wMonth); + b[M_YEAR] = toBcd( lpst->wYear % 100); + + if (I2CStart(M41T81S_SlaveAddrWrite)) return -1; + if (WriteI2C(M_HUNDREDTHS)) return -1; + + for (i=M_HUNDREDTHS; i<=M_YEAR; i++) { + if (WriteI2C(b[i])) return -1; + } + I2CStop(); + + if (I2CStart(M41T81S_SlaveAddrWrite)) return -1; + if (WriteI2C(M_FLAGS)) return -1; + if (I2CStart(M41T81S_SlaveAddrRead)) return -1; + flags = (unsigned char)ReadI2C(0); //read flags + I2CStop(); + +/* printf( "M41T81S_SetTime: Year:%u, Month:%u, Day:%u, Weekday:%u, Hour:%u, Minute:%u, second:%u flags:%u\n", + lpst->wYear, lpst->wMonth, lpst->wDay, lpst->wDayOfWeek, lpst->wHour, lpst->wMinute, lpst->wSecond, flags ); +*/ + + if (flags & MF_OF) { + if (I2CStart(M41T81S_SlaveAddrWrite)) return -1; + if (WriteI2C(M_FLAGS)) return -1; + if (WriteI2C(flags & ~MF_OF)) return -1; //clear oscillator failed bit + I2CStop(); + } + return 0; +} + +int M41T81S_GetTime(LPSYSTEMTIME lpst) +{ + int ret; + int reg = (READ_SM501_REG(SMIR_POWER_MODE_CONTROL) & 1) ? SMIR_PWRM1_GATE : SMIR_PWRM0_GATE; + int gate = READ_SM501_REG(reg); + if ((gate & 0x40)==0) STUFF_SM501_REG(reg, gate | 0x40); + STUFF_SM501_REG(SMIR_GPIO_32_63_CONTROL, + READ_SM501_REG(SMIR_GPIO_32_63_CONTROL) + & ~(GPBIT_MASK(I2C_CLK)|GPBIT_MASK(I2C_DATA))); // set as gpio controlled + udelay(LongBusWait); + ret = GetTime(lpst); + udelay(I2CWait); + SetDir_ClkData(INPUT,INPUT); //high clock, high data, just for safety, should be input already + if ((gate & 0x40)==0){ + STUFF_SM501_REG( reg, + READ_SM501_REG( reg ) + & ~0x40 ); //disable gpio if was originally + } + + return ret; +} +int M41T81S_SetTime(LPSYSTEMTIME lpst) +{ + int ret; + int reg = (READ_SM501_REG(SMIR_POWER_MODE_CONTROL) & 1) ? SMIR_PWRM1_GATE : SMIR_PWRM0_GATE; + int gate = READ_SM501_REG(reg); + if ((gate & 0x40)==0) STUFF_SM501_REG(reg, gate | 0x40); + STUFF_SM501_REG(SMIR_GPIO_32_63_CONTROL, + READ_SM501_REG(SMIR_GPIO_32_63_CONTROL) + & ~(GPBIT_MASK(I2C_CLK)|GPBIT_MASK(I2C_DATA))); // set as gpio controlled + udelay(LongBusWait); + ret = SetTime(lpst); + udelay(I2CWait); + SetDir_ClkData(INPUT,INPUT); //high clock, high data, just for safety, should be input already + if ((gate & 0x40)==0){ + STUFF_SM501_REG( reg, + READ_SM501_REG( reg ) + & ~0x40 ); //disable gpio if was originally + } + + return ret; +} + +static int badTime( LPSYSTEMTIME lpst ) +{ + return ( 1 > lpst->wMonth) + || + ( 12 < lpst->wMonth) + || + ( 1 > lpst->wDay) + || + ( 12 < lpst->wDay) + || + ( 24 <= lpst->wHour) + || + ( 60 <= lpst->wMinute) + || + ( 60 <= lpst->wSecond) + || + ( 1000 <= lpst->wMilliseconds ); +} + +static unsigned diffMs( LPSYSTEMTIME lpst1, + LPSYSTEMTIME lpst2 ) +{ + return ( (long)lpst2->wMilliseconds-(long)lpst1->wMilliseconds ) + + ( (long)lpst2->wSecond-(long)lpst1->wSecond)*1000 + + ( (long)lpst2->wMinute-(long)lpst1->wMinute)*60000 + + ( (long)lpst2->wHour-(long)lpst1->wHour)*3600000 ; +} + +static void printTime( LPSYSTEMTIME t ) +{ + printf( "%04u-%02u-%02u %02u:%02u:%02u.%02u", + t->wYear, t->wMonth, t->wDay, + t->wHour, t->wMinute, t->wSecond, t->wMilliseconds/10 ); +} + +// returns zero for success +static int parseTime( LPSYSTEMTIME t, + char const *dateString, + char const *timeString ) +{ + int rval = 1 ; + char *nextIn ; + unsigned long inVal = simple_strtoul( dateString, &nextIn, 10 ); + if( ( 0 == inVal ) || ( 2999 < inVal ) || ( '-' != *nextIn ) ) + goto bail ; + + nextIn++ ; + t->wYear = inVal ; + + inVal = simple_strtoul( nextIn, &nextIn, 10 ); + if( ( 0 == inVal ) || ( 12 < inVal ) || ( '-' != *nextIn ) ) + goto bail ; + + nextIn++ ; + t->wMonth = inVal ; + + inVal = simple_strtoul( nextIn, &nextIn, 10 ); + if( ( 0 == inVal ) || ( 31 < inVal ) || ( '\0' != *nextIn ) ) + goto bail ; + + nextIn++ ; + t->wDay = inVal ; + + t->wHour = 0 ; t->wMinute = 0 ; t->wSecond = 0 ; t->wMilliseconds = 0 ; + + if( 0 != timeString ) + { + inVal = simple_strtoul( timeString, &nextIn, 10 ); + if( ( 23 < inVal ) || ( ':' != *nextIn ) ) + goto bail ; + + nextIn++ ; + t->wHour = inVal ; + + inVal = simple_strtoul( nextIn, &nextIn, 10 ); + if( ( 59 < inVal ) || ( ':' != *nextIn ) ) + goto bail ; + + nextIn++ ; + t->wMinute = inVal ; + + inVal = simple_strtoul( nextIn, &nextIn, 10 ); + if( ( 59 < inVal ) || ( '.' != *nextIn ) ) + goto bail ; + + nextIn++ ; + t->wSecond = inVal ; + + inVal = simple_strtoul( nextIn, &nextIn, 10 ); + if( ( 99 < inVal ) || ( '\0' != *nextIn ) ) + goto bail ; + + nextIn++ ; + t->wMilliseconds = inVal*10 ; + rval = 0 ; + } + else + rval = 0 ; + +bail: + return rval ; +} + +int do_rtc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int rval = 1 ; + + if( 1 == argc ) + { + SYSTEMTIME t ; + int rval = M41T81S_GetTime( &t ); + if( 0 == rval ) + { + printTime(&t); + } + } + else if( ( 2 == argc ) && ( 0 == strcmp( "test", argv[1] ) ) ) + { + SYSTEMTIME t ; + int rval = M41T81S_GetTime( &t ); + if( 0 == rval ){ + if( badTime(&t) ){ + printf( "time not initialized...initializing\n" ); + t.wYear = 2006 ; + t.wMonth = 6 ; + t.wDay = 3 ; + memset( &t, 0, sizeof(t) ); + rval = M41T81S_SetTime(&t); + } + } + + if( 0 == rval ) + { + SYSTEMTIME t2 ; + udelay( 1000000 ); // wait a sec + rval = M41T81S_GetTime( &t2 ); + if( 0 == rval ) + { + unsigned diff = diffMs(&t,&t2); + + if( ( diff < 800 ) || ( diff > 1200 ) ) + { + rval = 1 ; // clock not moving or moving too fast (bad oscillator?) + if( 0 == diff ) + printf( "check RTC oscillator\n" ); +#ifdef DEBUG + printf( "rtc test failed!\n" + "difftime: %u\n", diff ); + printf( "t1: " ); printTime( &t ); printf( "\n" ); + printf( "t2: " ); printTime( &t2 ); printf( "\n" ); +#endif + } + } + } + } + else if( ( 2 == argc ) || ( 3 == argc ) ) + { + SYSTEMTIME t ; + if( 0 == parseTime( &t, argv[1], ( 3 == argc ) ? argv[2] : 0 ) ) + { + rval = M41T81S_SetTime(&t); + } + else + printf( "Invalid time format: use YYYY-MM-DD HH:MM:SS\n" ); + } + + return rval ; +} + +U_BOOT_CMD( + rtc, 127, 0, do_rtc, + "rtc - get/set/test RTC\n", + NULL +); + + diff -u -r --new-file u-boot-1.1.2/board/neon/sm501.h u-boot-1.1.2-neon/board/neon/sm501.h --- u-boot-1.1.2/board/neon/sm501.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/neon/sm501.h 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,22 @@ +#ifndef __SM501_H__ +#define __SM501_H__ + +/* + * sm501.h + * + * Defines constants and macros for the SM-501 Graphics Controller. + * + */ + +extern unsigned long const mmioStart ; +extern unsigned long const mmioLength ; + +#define SMIR_GPIO_32_63_CONTROL 0x0000c +#define SMIR_PWRM0_GATE 0x00040 +#define SMIR_PWRM1_GATE 0x00048 +#define SMIR_POWER_MODE_CONTROL 0x00054 + +#define READ_SM501_REG( addr ) *( (unsigned long volatile *)((addr)+mmioStart) ) +#define STUFF_SM501_REG( addr, value ) *( (unsigned long volatile *)((addr)+mmioStart) ) = (value) + +#endif diff -u -r --new-file u-boot-1.1.2/board/neon/u-boot.lds u-boot-1.1.2-neon/board/neon/u-boot.lds --- u-boot-1.1.2/board/neon/u-boot.lds 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/neon/u-boot.lds 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/pxa/start.o (.text) + cpu/pxa/ministart.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff -u -r --new-file u-boot-1.1.2/board/neon/u-bootmini.lds u-boot-1.1.2-neon/board/neon/u-bootmini.lds --- u-boot-1.1.2/board/neon/u-bootmini.lds 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/board/neon/u-bootmini.lds 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(StartUp) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/pxa/minidebug.o (.text) + cpu/pxa/ministart.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff -u -r --new-file u-boot-1.1.2/common/cmd_boot.c u-boot-1.1.2-neon/common/cmd_boot.c --- u-boot-1.1.2/common/cmd_boot.c 2003-10-09 01:26:14.000000000 +0200 +++ u-boot-1.1.2-neon/common/cmd_boot.c 2007-08-11 21:07:20.000000000 +0200 @@ -59,6 +59,7 @@ */ argv[0] = (char *)gd; #endif + *((ulong*)0x40e00014) |= (1<<25); //make gpio89 an output(ac97_reset) #if !defined(CONFIG_NIOS) rc = ((ulong (*)(int, char *[]))addr) (--argc, &argv[1]); #else diff -u -r --new-file u-boot-1.1.2/common/cmd_bootm.c u-boot-1.1.2-neon/common/cmd_bootm.c --- u-boot-1.1.2/common/cmd_bootm.c 2004-11-21 01:06:34.000000000 +0100 +++ u-boot-1.1.2-neon/common/cmd_bootm.c 2007-08-11 21:07:20.000000000 +0200 @@ -29,8 +29,6 @@ #include #include #include -#include -#include #include #include @@ -73,10 +71,12 @@ # define CHUNKSZ (64 * 1024) #endif +#ifdef CONFIG_GZIP +#include int gunzip (void *, int, unsigned char *, unsigned long *); - static void *zalloc(void *, unsigned, unsigned); static void zfree(void *, void *, unsigned); +#endif #if (CONFIG_COMMANDS & CFG_CMD_IMI) static int image_info (unsigned long addr); @@ -327,12 +327,17 @@ break; case IH_COMP_GZIP: printf (" Uncompressing %s ... ", name); +#ifdef CONFIG_GZIP if (gunzip ((void *)ntohl(hdr->ih_load), unc_len, (uchar *)data, &len) != 0) { puts ("GUNZIP ERROR - must RESET board to recover\n"); SHOW_BOOT_PROGRESS (-6); do_reset (cmdtp, flag, argc, argv); } +#else + printf( "GUNZIP not supported\n" ); +#endif + break; #ifdef CONFIG_BZIP2 case IH_COMP_BZIP2: @@ -1221,6 +1226,8 @@ printf ("%s %s %s (%s)", arch, os, type, comp); } +#ifdef CONFIG_GZIP + #define ZALLOC_ALIGNMENT 16 static void *zalloc(void *x, unsigned items, unsigned size) @@ -1302,6 +1309,8 @@ return (0); } +#endif // CONFIG_GZIP + #ifdef CONFIG_BZIP2 void bz_internal_error(int errcode) diff -u -r --new-file u-boot-1.1.2/common/cmd_fat.c u-boot-1.1.2-neon/common/cmd_fat.c --- u-boot-1.1.2/common/cmd_fat.c 2004-08-28 23:09:15.000000000 +0200 +++ u-boot-1.1.2-neon/common/cmd_fat.c 2007-08-11 21:07:20.000000000 +0200 @@ -30,6 +30,13 @@ #include #include +#define CONFIG_FATLOAD_TICKS +#define CONFIG_FATLOAD_ADLER + +#ifdef CONFIG_FATLOAD_ADLER +#include +#endif + #if (CONFIG_COMMANDS & CFG_CMD_FAT) #undef DEBUG @@ -83,6 +90,11 @@ int dev=0; int part=1; char *ep; +#ifdef CONFIG_FATLOAD_TICKS + ulong ticks1 ; + ulong ticks2 ; + ulong ticks3 ; +#endif if (argc < 5) { printf ("usage: fatload [bytes]\n"); @@ -110,6 +122,10 @@ count = simple_strtoul (argv[5], NULL, 16); else count = 0; +#ifdef CONFIG_FATLOAD_TICKS + ticks1 = get_timer( 0 ); +#endif + size = file_fat_read (argv[4], (unsigned char *) offset, count); if(size==-1) { @@ -117,7 +133,21 @@ return 1; } - printf ("\n%ld bytes read\n", size); + printf ("\n%ld bytes read", size); + +#ifdef CONFIG_FATLOAD_TICKS + ticks2 = get_timer( 0 ); + printf( " in %lu ticks, (%lu ms)", (ticks2-ticks1), (ticks2-ticks1)/(CFG_HZ/1000) ); +#endif + +#ifdef CONFIG_FATLOAD_ADLER + printf( ", adler == 0x" ); + printf( "%08lx", adler32(0, (Bytef *)offset, size ) ); + ticks3 = get_timer( 0 ); + printf( " in %lu ticks, (%lu ms)", (ticks3-ticks2), (ticks3-ticks2)/(CFG_HZ/1000) ); +#endif + + printf( "\n" ); sprintf(buf, "%lX", size); setenv("filesize", buf); diff -u -r --new-file u-boot-1.1.2/common/cmd_flash.c u-boot-1.1.2-neon/common/cmd_flash.c --- u-boot-1.1.2/common/cmd_flash.c 2004-12-31 10:32:50.000000000 +0100 +++ u-boot-1.1.2-neon/common/cmd_flash.c 2007-08-11 21:07:20.000000000 +0200 @@ -507,7 +507,7 @@ ); U_BOOT_CMD( - erase, 3, 1, do_flerase, + erase, 3, 0, do_flerase, "erase - erase FLASH memory\n", "start end\n" " - erase FLASH from addr 'start' to addr 'end'\n" diff -u -r --new-file u-boot-1.1.2/common/cmd_lcdpanel.c u-boot-1.1.2-neon/common/cmd_lcdpanel.c --- u-boot-1.1.2/common/cmd_lcdpanel.c 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/common/cmd_lcdpanel.c 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,265 @@ +/* + * Module cmd_lcdpanel.cpp + * + * This module defines ... + * + * + * Change History : + * + * $Log: cmd_lcdpanel.c,v $ + * Revision 1.8 2005/09/19 13:15:59 ericn + * -allow zeros in most fields + * + * Revision 1.7 2005/08/22 16:30:32 ericn + * -update panel env var w/lcdp command + * + * Revision 1.6 2005/07/18 03:05:53 ericn + * -allow cmdline config of CRT + * + * Revision 1.5 2005/07/06 05:26:54 ericn + * -make lcdinfo command conditional on PXALCD + * + * Revision 1.4 2005/07/04 18:49:01 ericn + * -added lcdi command + * + * Revision 1.3 2005/06/02 04:01:30 ericn + * -allow zero value of pixclock (meaning slow one) + * + * Revision 1.2 2005/04/30 20:32:44 ericn + * -added disable cmd + * + * Revision 1.1 2005/04/09 17:49:15 ericn + * -Initial import + * + * + * Copyright Boundary Devices, Inc. 2005 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include +#if (CONFIG_COMMANDS & CFG_CMD_LCDPANEL) + +#include +#include + +extern char console_buffer[]; /* console I/O buffer */ + +static void print_panel_info( struct lcd_panel_info_t const *panel ) +{ + printf( "------------------------------------\n" + "name : %s\n", panel->name ); + printf( "pixclock : %u\n", panel->pixclock ); + printf( "xres : %u\n", panel->xres ); + printf( "yres : %u\n", panel->yres ); + printf( "act_high : %u\n", panel->act_high ); + printf( "hsync_len : %u\n", panel->hsync_len ); + printf( "left_margin : %u\n", panel->left_margin ); + printf( "right_margin : %u\n", panel->right_margin ); + printf( "vsync_len : %u\n", panel->vsync_len ); + printf( "upper_margin : %u\n", panel->upper_margin ); + printf( "lower_margin : %u\n", panel->lower_margin ); + printf( "active : %u\n", panel->active ); + printf( "CRT ? %u\n", panel->crt ); +} + +static struct lcd_panel_info_t const *prompt_for_panel( void ) +{ + struct lcd_panel_info_t *panel = (struct lcd_panel_info_t *)malloc(sizeof(struct lcd_panel_info_t)); + int bytesRead ; + + memset( panel, 0, sizeof(*panel)); + + bytesRead = readline( "name: " ); + if( 0 < bytesRead ) + { + panel->name = strdup( console_buffer ); + bytesRead = readline( "pixclock: " ); + if( 0 < bytesRead ) + { + char *endp; + ulong value = simple_strtoul( console_buffer, &endp, 0 ); + if( endp > console_buffer ) + { + panel->pixclock = value ; + bytesRead = readline( "xres: " ); + if( ( 0 < bytesRead ) + && ( 0 != ( value = simple_strtoul( console_buffer, &endp, 0 ) ) ) + && ( endp > console_buffer ) ) + { + panel->xres = value ; + bytesRead = readline( "yres: " ); + if( ( 0 < bytesRead ) + && ( 0 != ( value = simple_strtoul( console_buffer, &endp, 0 ) ) ) + && ( endp > console_buffer ) ) + { + panel->yres = value ; + bytesRead = readline( "act_high: " ); + if( ( 0 < bytesRead ) + && ( 1 >= ( value = simple_strtoul( console_buffer, &endp, 0 ) ) ) + && ( endp > console_buffer ) ) + { + panel->act_high = value ; + bytesRead = readline( "hsync_len: " ); + if( ( 0 < bytesRead ) + && ( 0 != ( value = simple_strtoul( console_buffer, &endp, 0 ) ) ) + && ( endp > console_buffer ) ) + { + panel->hsync_len = value ; + bytesRead = readline( "left_margin: " ); + value = simple_strtoul( console_buffer, &endp, 0 ); + if( ( 0 < bytesRead ) + && ( endp > console_buffer ) ) + { + panel->left_margin = value ; + bytesRead = readline( "right_margin: " ); + value = simple_strtoul( console_buffer, &endp, 0 ); + if( ( 0 < bytesRead ) + && ( endp > console_buffer ) ) + { + panel->right_margin = value ; + bytesRead = readline( "vsync_len: " ); + value = simple_strtoul( console_buffer, &endp, 0 ); + if( ( 0 < bytesRead ) + && ( endp > console_buffer ) ) + { + panel->vsync_len = value ; + bytesRead = readline( "upper_margin: " ); + value = simple_strtoul( console_buffer, &endp, 0 ); + if( ( 0 < bytesRead ) + && ( endp > console_buffer ) ) + { + panel->upper_margin = value ; + bytesRead = readline( "lower_margin: " ); + value = simple_strtoul( console_buffer, &endp, 0 ); + if( ( 0 < bytesRead ) + && ( endp > console_buffer ) ) + { + panel->lower_margin = value ; + bytesRead = readline( "active (0|1) : " ); + value = simple_strtoul( console_buffer, &endp, 0 ); + if( ( 0 < bytesRead ) && ( endp > console_buffer ) ) + { + panel->active = value ; + bytesRead = readline( "crt (0|1) : " ); + value = simple_strtoul( console_buffer, &endp, 0 ); + if( ( 0 < bytesRead ) + && + ( endp > console_buffer ) ) + { + panel->crt = value ; + print_panel_info( panel ); + return panel ; + } + } + } + } + } + } + } + } + } + } + } + } + } + } + + free( panel ); + + return 0 ; +} + +static int lcdpanel(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + if ( 1 == argc ) { + if( cur_lcd_panel ) + print_panel_info( cur_lcd_panel ); + else + printf( "no panel defined\n" ); + } + else { + struct lcd_panel_info_t const *panel = find_lcd_panel( argv[1] ); + if( panel ) { + printf( "found panel %s\n", panel->name ); + set_lcd_panel( panel ); + setenv( "panel", panel->name ); + } + else if( '+' == *argv[1] ) { + panel = prompt_for_panel(); + if( panel ) + { + print_panel_info( panel ); + set_lcd_panel( panel ); + } + } + else if( '?' == *argv[1] ) + { + int i ; + for( i = 0 ; i < num_lcd_panels ; i++ ) + print_panel_info( lcd_panels+i ); + } + else if( '-' == *argv[1] ) + { + disable_lcd_panel(); + printf( "panel disabled\n" ); + } + else + printf( "panel %s not found\n", argv[1] ); + } + + return 0; +} + + +U_BOOT_CMD( + lcdpanel, 2, 0, lcdpanel, + "lcdpanel [panelName|?|+|-]\n" + " init lcd panel with panel name\n" + " ? will display the supported panels\n" + " + will prompt for panel details\n" + " - will disable the panel\n", + NULL +); + +#ifdef PXALCD +#include + +static int lcdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + printf( "--> lcdinfo:\n" + "screen: %08lx\n" + "palette: %08lx/%u\n", + panel_info.pxa.screen, + panel_info.pxa.palette, + panel_info.pxa.palette_size ); + return 0 ; +} + +U_BOOT_CMD( + lcdinfo, 2, 0, lcdinfo, + "lcdinfo\n", + NULL +); +#endif + +#endif /* CFG_CMD_LCDPANEL */ + + + + diff -u -r --new-file u-boot-1.1.2/common/cmd_lcdpanel.h u-boot-1.1.2-neon/common/cmd_lcdpanel.h --- u-boot-1.1.2/common/cmd_lcdpanel.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/common/cmd_lcdpanel.h 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,24 @@ +#ifndef __CMD_LCDPANEL_H__ +#define __CMD_LCDPANEL_H__ "$Id: cmd_lcdpanel.h,v 1.1 2005/04/09 17:49:16 ericn Exp $" + +/* + * cmd_lcdpanel.h + * + * This header file declares ... + * + * + * Change History : + * + * $Log: cmd_lcdpanel.h,v $ + * Revision 1.1 2005/04/09 17:49:16 ericn + * -Initial import + * + * + * + * Copyright Boundary Devices, Inc. 2005 + */ + + + +#endif + diff -u -r --new-file u-boot-1.1.2/common/cmd_mmc.c u-boot-1.1.2-neon/common/cmd_mmc.c --- u-boot-1.1.2/common/cmd_mmc.c 2003-07-01 23:07:07.000000000 +0200 +++ u-boot-1.1.2-neon/common/cmd_mmc.c 2007-08-11 21:07:20.000000000 +0200 @@ -43,4 +43,71 @@ NULL ); +int do_mmc_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + if( 5 == argc ) + { + unsigned long args[4]; + unsigned i ; + for( i = 1 ; i < 5 ; i++ ) + { + char *endp ; + args[i-1] = simple_strtoul(argv[i], &endp, 16 ); + if( 0 != *endp ) + { + printf( "arg[%u] is not a valid hex number\n", i ); + break; + } + } + + if( 5 == i ) + { + uchar *resp = mmc_cmd( (ushort)args[0], + (ushort)args[1], + (ushort)args[2], + (ushort)args[3] ); + ushort numWords = 0 ; + switch( args[3] ) + { + case MMC_CMDAT_R1: + case MMC_CMDAT_R3: + numWords = 3; + break; + + case MMC_CMDAT_R2: + numWords = 8; + break; + + default: + printf( "Invalid response type %lu, options are [1,2,3]\n", args[3] ); + break; + } + + if( resp ) + { + for( i = 0 ; i < numWords*2 ; i++ ) + { + printf( "%02X ", resp[i] ); + } + printf( "\n" ); + } + else + printf( "no response\n" ); + } + } + else + printf ("Usage:\n%s\n", cmdtp->usage); + + return 0; +} + +extern uchar * +mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat); + +U_BOOT_CMD( + mmccmd, 5, 0, do_mmc_cmd, + "mmccmd - issue mmc command\n", + "mmccmd cmd# argh(hex) argl(hex) rsptype\n" +); + #endif /* CFG_CMD_MMC */ diff -u -r --new-file u-boot-1.1.2/common/cmd_net.c u-boot-1.1.2-neon/common/cmd_net.c --- u-boot-1.1.2/common/cmd_net.c 2004-06-09 14:42:26.000000000 +0200 +++ u-boot-1.1.2-neon/common/cmd_net.c 2007-08-11 21:07:20.000000000 +0200 @@ -46,6 +46,104 @@ "[loadAddress] [bootfilename]\n" ); +extern int get_rom_mac (char *v_rom_mac); +extern int set_rom_mac (char const *v_rom_mac); + +/* + * returns -1 if not valid hex + */ +static int hexValue( char c ) +{ + if( ( '0' <= c ) && ( '9' >= c ) ) + { + return c-'0' ; + } + else if( ( 'A' <= c ) && ( 'F' >= c ) ) + { + return c-'A'+10 ; + } + else if( ( 'a' <= c ) && ( 'f' >= c ) ) + { + return c-'a'+10 ; + } + else + return -1 ; +} + +// returns non-zero to indicate success +static int parse_mac( char const *macString, // input + char *macaddr ) // output: not NULL-terminated +{ + int i ; + for( i = 0 ; i < 6 ; i++ ) + { + char high, low, term ; + int highval, lowval ; + high = *macString++ ; + + if( ( 0 == high ) + || + ( 0 > ( highval = hexValue(high) ) ) ) + break ; + low = *macString++ ; + if( ( 0 == low ) + || + ( 0 > ( lowval = hexValue(low) ) ) ) + break ; + + term = *macString++ ; + if( 5 > i ) + { + if( ( '-' != term ) && ( ':' != term ) ) + break ; + } + else if( '\0' != term ) + break ; + + *macaddr++ = (highval<<4) | lowval ; + } + + return ( 6 == i ); +} + +int do_mac (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + if( 2 == argc ) + { + char mac[6]; + if( parse_mac( argv[1], mac ) ) + { + printf( "setting mac address to %02x:%02x:%02x:%02x:%02x:%02x\n", + mac[0],mac[1],mac[2],mac[3],mac[4],mac[5] ); + if( set_rom_mac( mac ) ) + printf( "done\n" ); + else + printf( "Error setting mac address\n" ); + } + else + printf( "Error parsing mac: use form NN:NN:NN:NN:NN:NN\n" ); + } + else + { + char mac[6]; + if( get_rom_mac( mac ) ) + printf( "mac address %02x:%02x:%02x:%02x:%02x:%02x\n", + mac[0],mac[1],mac[2],mac[3],mac[4],mac[5] ); + else if( 0xFF == mac[0] ) + printf( "MAC has not been programmed\n" ); + else + printf( "error reading mac\n" ); + } + return 0 ; +} + +U_BOOT_CMD( + mac, 3, 1, do_mac, + "mac\t- read/write mac address\n", + "- supply a parameter of the form NN:NN:NN:NN:NN:NN to set" +); + + int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { return netboot_common (TFTP, cmdtp, argc, argv); diff -u -r --new-file u-boot-1.1.2/common/cmd_not.c u-boot-1.1.2-neon/common/cmd_not.c --- u-boot-1.1.2/common/cmd_not.c 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/common/cmd_not.c 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2006 + * Eric Nelson, Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#if (CONFIG_COMMANDS & CFG_CMD_NOT) + +int do_not (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int rval = 1 ; + if( 1 < argc ) + { + cmd_tbl_t *cmd = find_cmd(argv[1]); + if( cmd ) + { + rval = ( 0 == cmd->cmd(cmd, flag, argc-1, argv+1) ); + } + else + printf( "command %s not found\n", argv[1] ); + } + else + printf( "Usage not command [..params]\n" ); + + return rval ; +} + +U_BOOT_CMD( + not, 127, 0, do_not, + "not - negate a command\n", + NULL +); + +#endif /* CONFIG_COMMANDS & CFG_CMD_NOT */ diff -u -r --new-file u-boot-1.1.2/common/cmd_nvedit.c u-boot-1.1.2-neon/common/cmd_nvedit.c --- u-boot-1.1.2/common/cmd_nvedit.c 2004-09-30 00:55:14.000000000 +0200 +++ u-boot-1.1.2-neon/common/cmd_nvedit.c 2007-08-11 21:07:20.000000000 +0200 @@ -487,16 +487,21 @@ { int i, nxt; +// printf ("before WATCHDOG_RESET\n"); WATCHDOG_RESET(); +// printf ("after WATCHDOG_RESET\n"); for (i=0; env_get_char(i) != '\0'; i=nxt+1) { int val; +// printf ("i= %i\n", i); for (nxt=i; env_get_char(nxt) != '\0'; ++nxt) { if (nxt >= CFG_ENV_SIZE) { return (NULL); } +// putc(env_get_char(nxt)); } +// printf ("\n"); if ((val=envmatch(name, i)) < 0) continue; return (env_get_addr(val)); diff -u -r --new-file u-boot-1.1.2/common/command.c u-boot-1.1.2-neon/common/command.c --- u-boot-1.1.2/common/command.c 2004-04-18 19:39:39.000000000 +0200 +++ u-boot-1.1.2-neon/common/command.c 2007-08-11 21:07:20.000000000 +0200 @@ -27,6 +27,9 @@ #include #include +#ifdef CONFIG_LCD +#include "lcd.h" +#endif int do_version (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -74,6 +77,41 @@ " - echo args to console; \\c suppresses newline\n" ); +#ifdef CONFIG_LCD + +int +do_lecho (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int i, putnl = 1; + + for (i = 1; i < argc; i++) { + char *p = argv[i], c; + + if (i > 1) + putc(' '); + while ((c = *p++) != '\0') { + if (c == '\\' && *p == 'c') { + putnl = 0; + p++; + } else { + lcd_putc(c); + } + } + } + + if (putnl) + lcd_putc('\n'); + return 0; +} + +U_BOOT_CMD( + lecho, CFG_MAXARGS, 1, do_lecho, + "lecho - echo args to lcd\n", + "[args..]\n" + " - echo args to lcd; \\c suppresses newline\n" +); +#endif + #ifdef CFG_HUSH_PARSER int diff -u -r --new-file u-boot-1.1.2/common/env_flash.c u-boot-1.1.2-neon/common/env_flash.c --- u-boot-1.1.2/common/env_flash.c 2004-03-14 02:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/common/env_flash.c 2007-08-11 21:07:20.000000000 +0200 @@ -83,6 +83,10 @@ #define OBSOLETE_FLAG 0 #endif /* CFG_ENV_ADDR_REDUND */ +#ifdef CFG_ENV_IS_IN_FLASH +static env_t *flash_addr_new = (env_t *)CFG_ENV_ADDR ; +#endif + extern uchar default_environment[]; extern int default_environment_size; diff -u -r --new-file u-boot-1.1.2/common/fnmatch.c u-boot-1.1.2-neon/common/fnmatch.c --- u-boot-1.1.2/common/fnmatch.c 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/common/fnmatch.c 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,166 @@ +/* + * (C) Copyright 2005 + * Boundary Devices + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include + +/* Some file systems are case-insensitive. If FOLD_FN_CHAR is + #defined, it maps the character C onto its "canonical" form. In a + case-insensitive system, it would map all alphanumeric characters + to lower case. Under Windows NT, / and \ are both path component + separators, so FOLD_FN_CHAR would map them both to /. */ +#define FOLD_FN_CHAR(c) (c) + + +int fnmatch(const char *pattern, const char *string, int flags) +{ + register const char *p = pattern, *n = string; + register char c; + + while ((c = *p++) != '\0') + { + switch (c) + { + case '?': + if (*n == '\0') + return FNM_NOMATCH; + else if ((flags & FNM_PATHNAME) && *n == '/') + return FNM_NOMATCH; + else if ((flags & FNM_PERIOD) && *n == '.' && + (n == string || ((flags & FNM_PATHNAME) && n[-1] == '/'))) + return FNM_NOMATCH; + break; + + case '\\': + if (!(flags & FNM_NOESCAPE)) + c = *p++; + if (FOLD_FN_CHAR (*n) != FOLD_FN_CHAR (c)) + return FNM_NOMATCH; + break; + + case '*': + if ((flags & FNM_PERIOD) && *n == '.' && + (n == string || ((flags & FNM_PATHNAME) && n[-1] == '/'))) + return FNM_NOMATCH; + + for (c = *p++; c == '?' || c == '*'; c = *p++, ++n) + if (((flags & FNM_PATHNAME) && *n == '/') || + (c == '?' && *n == '\0')) + return FNM_NOMATCH; + + if (c == '\0') + return 0; + + { + char c1 = (!(flags & FNM_NOESCAPE) && c == '\\') ? *p : c; + for (--p; *n != '\0'; ++n) + if ((c == '[' || FOLD_FN_CHAR (*n) == FOLD_FN_CHAR (c1)) && + fnmatch(p, n, flags & ~FNM_PERIOD) == 0) + return 0; + return FNM_NOMATCH; + } + + case '[': + { + /* Nonzero if the sense of the character class is inverted. */ + register int not; + + if (*n == '\0') + return FNM_NOMATCH; + + if ((flags & FNM_PERIOD) && *n == '.' && + (n == string || ((flags & FNM_PATHNAME) && n[-1] == '/'))) + return FNM_NOMATCH; + + not = (*p == '!' || *p == '^'); + if (not) + ++p; + + c = *p++; + for (;;) + { + register char cstart = c, cend = c; + + if (!(flags & FNM_NOESCAPE) && c == '\\') + cstart = cend = *p++; + + if (c == '\0') + /* [ (unterminated) loses. */ + return FNM_NOMATCH; + + c = *p++; + + if ((flags & FNM_PATHNAME) && c == '/') + /* [/] can never match. */ + return FNM_NOMATCH; + + if (c == '-' && *p != ']') + { + cend = *p++; + if (!(flags & FNM_NOESCAPE) && cend == '\\') + cend = *p++; + if (cend == '\0') + return FNM_NOMATCH; + c = *p++; + } + + if (*n >= cstart && *n <= cend) + goto matched; + + if (c == ']') + break; + } + if (!not) + return FNM_NOMATCH; + break; + + matched:; + /* Skip the rest of the [...] that already matched. */ + while (c != ']') + { + if (c == '\0') + /* [... (unterminated) loses. */ + return FNM_NOMATCH; + + c = *p++; + if (!(flags & FNM_NOESCAPE) && c == '\\') + /* 1003.2d11 is unclear if this is right. %%% */ + ++p; + } + if (not) + return FNM_NOMATCH; + } + break; + + default: + if (FOLD_FN_CHAR (c) != FOLD_FN_CHAR (*n)) + return FNM_NOMATCH; + } + + ++n; + } + + if (*n == '\0') + return 0; + + return FNM_NOMATCH; +} + diff -u -r --new-file u-boot-1.1.2/common/lcd.c u-boot-1.1.2-neon/common/lcd.c --- u-boot-1.1.2/common/lcd.c 2004-12-10 12:40:50.000000000 +0100 +++ u-boot-1.1.2-neon/common/lcd.c 2007-08-11 21:07:20.000000000 +0200 @@ -41,7 +41,7 @@ #endif #include -#if defined(CONFIG_PXA250) +#if defined(CONFIG_PXA250) || defined(CONFIG_PXA270) #include #endif @@ -94,8 +94,46 @@ static int lcd_getfgcolor (void); #endif /* NOT_USED_SO_FAR */ -/************************************************************************/ +static int luminance( int red, int green, int blue ) +{ + // + // I've seen a couple of different algorithms here: + // (max+min)/2 +/* + + int max = MAX( red, MAX( green, blue ) ); + int min = MIN( red, MIN( green, blue ) ); + return (max+min)/2 ; +*/ + + // A more mathematically-correct version +// return (int)(c.R*0.3 + c.G*0.59+ c.B*0.11); + + // Just return 'green' + // return green; + + // and one that uses shifts and adds to come close to the above + // + // red = 5/16= 0.3125 == 1/4 + 1/16 + // green = 9/16= 0.5625 == 1/2 + 1/16 + // blue = 1/8 = 0.125 + // + if( 0 < red ) + red = (red>>2) + (red>>4); + else + red = 0 ; + if( 0 < green ) + green = (green>>1) + (green>>4) ; + else + green = 0 ; + if( 0 < blue ) + blue = blue >> 3 ; + else + blue = 0 ; + return red+green+blue ; +} +/************************************************************************/ /*----------------------------------------------------------------------*/ static void console_scrollup (void) @@ -221,10 +259,10 @@ uchar *dest; ushort off, row; - dest = (uchar *)(lcd_base + y * lcd_line_length + x * (1 << LCD_BPP) / 8); + dest = (uchar *)(lcd_base + y * panel_info.vl_lcd_line_length + x * (1 << LCD_BPP) / 8); off = x * (1 << LCD_BPP) % 8; - for (row=0; row < VIDEO_FONT_HEIGHT; ++row, dest += lcd_line_length) { + for (row=0; row < VIDEO_FONT_HEIGHT; ++row, dest += panel_info.vl_lcd_line_length) { uchar *s = str; uchar *d = dest; int i; @@ -337,8 +375,6 @@ lcd_base = (void *)(gd->fb_base); - lcd_line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8; - lcd_init (lcd_base); /* LCD initialization */ /* Device initialization */ @@ -389,7 +425,7 @@ /* set framebuffer to background color */ memset ((char *)lcd_base, COLOR_MASK(lcd_getbgcolor()), - lcd_line_length*panel_info.vl_row); + panel_info.vl_lcd_line_length*panel_info.vl_row); #endif /* Paint the logo and retrieve LCD base address */ debug ("[LCD] Drawing the logo...\n"); @@ -500,12 +536,13 @@ #ifdef CONFIG_LCD_LOGO void bitmap_plot (int x, int y) { - ushort *cmap; + PALETTEVAL_TYPE *cmap; ushort i, j; uchar *bmap; uchar *fb; ushort *fb16; -#if defined(CONFIG_PXA250) + +#if defined(PXALCD) struct pxafb_info *fbi = &panel_info.pxa; #elif defined(CONFIG_MPC823) volatile immap_t *immr = (immap_t *) CFG_IMMR; @@ -514,17 +551,18 @@ debug ("Logo: width %d height %d colors %d cmap %d\n", BMP_LOGO_WIDTH, BMP_LOGO_HEIGHT, BMP_LOGO_COLORS, - sizeof(bmp_logo_palette)/(sizeof(ushort))); + sizeof(bmp_logo_palette)/(sizeof(PALETTEVAL_TYPE))); bmap = &bmp_logo_bitmap[0]; - fb = (char *)(lcd_base + y * lcd_line_length + x); + fb = (char *)(lcd_base + y * panel_info.vl_lcd_line_length + x); if (NBITS(panel_info.vl_bpix) < 12) { /* Leave room for default color map */ -#if defined(CONFIG_PXA250) - cmap = (ushort *)fbi->palette; +#if defined(PXALCD) + cmap = (PALETTEVAL_TYPE *)fbi->palette; #elif defined(CONFIG_MPC823) cmap = (ushort *)&(cp->lcd_cmap[BMP_LOGO_OFFSET*sizeof(ushort)]); +#elif defined(CONFIG_SM501) #endif WATCHDOG_RESET(); @@ -532,10 +570,13 @@ /* Set color map */ for (i=0; i<(sizeof(bmp_logo_palette)/(sizeof(ushort))); ++i) { ushort colreg = bmp_logo_palette[i]; -#ifdef CFG_INVERT_COLORS - *cmap++ = 0xffff - colreg; +#if defined(CONFIG_SM501) #else + #ifdef CFG_INVERT_COLORS + *cmap++ = 0xffff - colreg; + #else *cmap++ = colreg; + #endif #endif } @@ -548,7 +589,7 @@ } } else { /* true color mode */ - fb16 = (ushort *)(lcd_base + y * lcd_line_length + x); + fb16 = (ushort *)(lcd_base + y * panel_info.vl_lcd_line_length + x); for (i=0; iheader.signature[1]=='M'))) { printf ("Error: no valid bmp image at %lx\n", bmp_image); return 1; -} + } width = le32_to_cpu (bmp->header.width); height = le32_to_cpu (bmp->header.height); @@ -616,33 +666,64 @@ (int)width, (int)height, (int)colors); if (bpix==8) { -#if defined(CONFIG_PXA250) - cmap = (ushort *)fbi->palette; +#if defined(PXALCD) + cmap = (PALETTEVAL_TYPE *)fbi->palette; #elif defined(CONFIG_MPC823) cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]); +#elif defined(CONFIG_SM501) + cmap = (uchar *)paletteRegs ; #else # error "Don't know location of color map" #endif /* Set color map */ for (i=0; icolor_table[i]; +#if defined(CONFIG_SM501) + *cmap++ = cte.blue ; + *cmap++ = cte.green ; + *cmap++ = cte.red ; + *cmap++ = 0 ; +#elif defined(CONFIG_PXA270) && defined(PXALCD) + *cmap = 0xFF000000 ; + *cmap |= cte.red << 16 ; + *cmap |= cte.green << 8 ; + *cmap |= cte.blue ; + *cmap++ ; +#else ushort colreg = ( ((cte.red) << 8) & 0xf800) | ( ((cte.green) << 4) & 0x07e0) | ( (cte.blue) & 0x001f) ; - -#ifdef CFG_INVERT_COLORS + #ifdef CFG_INVERT_COLORS *cmap = 0xffff - colreg; -#else + #else *cmap = colreg; -#endif -#if defined(CONFIG_PXA250) + #endif + #if defined(PXALCD) cmap++; -#elif defined(CONFIG_MPC823) + #elif defined(CONFIG_MPC823) cmap--; + #endif #endif + lum = luminance( cte.red, cte.green, cte.blue ); + if( lum > maxLum ) + { + maxLum = lum ; + bgCol = i ; + } + + if( lum < minLum ) + { + minLum = lum ; + fgCol = i ; + } } + + printf( "bgcolor %u, fg %u\n", bgCol, fgCol ); + lcd_color_fg = fgCol ; + lcd_color_bg = bgCol ; } padded_line = (width&0x3) ? ((width&~0x3)+4) : (width); @@ -653,16 +734,16 @@ bmap = (uchar *)bmp + le32_to_cpu (bmp->header.data_offset); fb = (uchar *) (lcd_base + - (y + height - 1) * lcd_line_length + x); + (y + height - 1) * panel_info.vl_lcd_line_length + x); for (i = 0; i < height; ++i) { for (j = 0; j < width ; j++) -#if defined(CONFIG_PXA250) +#if defined(CONFIG_PXA250) || defined(CONFIG_PXA270) *(fb++)=*(bmap++); #elif defined(CONFIG_MPC823) *(fb++)=255-*(bmap++); #endif - bmap += (width - padded_line); - fb -= (width + lcd_line_length); + bmap += (padded_line-width); + fb -= (width + panel_info.vl_lcd_line_length); } return (0); @@ -735,7 +816,7 @@ #endif /* LCD_INFO */ #if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO) - return ((void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length)); + return ((void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * panel_info.vl_lcd_line_length)); #else return ((void *)lcd_base); #endif /* CONFIG_LCD_LOGO */ diff -u -r --new-file u-boot-1.1.2/common/lcd_panels.c u-boot-1.1.2-neon/common/lcd_panels.c --- u-boot-1.1.2/common/lcd_panels.c 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/common/lcd_panels.c 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,286 @@ +/* + * Module lcd_panels.cpp + * + * This module defines the num_lcd_panels and lcd_panels + * constants as declared in lcd_panels.h + * + * Change History : + * + * $Log: lcd_panels.c,v $ + * Revision 1.9 2006/05/23 18:46:39 ericn + * -added hitachi_wxga panel + * + * Revision 1.8 2005/09/19 13:15:43 ericn + * -updated sharp_qvga timing + * + * Revision 1.7 2005/07/18 03:05:35 ericn + * -update crt1024x768 timings + * + * Revision 1.6 2005/07/07 03:42:22 tkisky + * -make my CRT 1024x768 display work + * + * Revision 1.5 2005/06/02 04:02:39 ericn + * -added qvga_portrait + * + * Revision 1.4 2005/05/15 18:59:00 tkisky + * -change polarity of hitachi_wvga + * + * Revision 1.3 2005/05/03 15:32:11 ericn + * -fast pixclock for hvga, remove redundant 1024x768 + * + * Revision 1.2 2005/04/30 20:33:22 ericn + * -added CRT support + * + * Revision 1.1 2005/04/09 17:49:17 ericn + * -Initial import + * + * + * Copyright Boundary Devices, Inc. 2005 + */ + + +#include "lcd_panels.h" +#include + +/* +Settings for Hitachi 5.7 + PANEL_HORIZONTAL_TOTAL, 01c00160); // should be 34+320+1+64-1= 418 = 0x1A2 (Hex) + + 0x13f+16 + PANEL_HORIZONTAL_SYNC, 00400161); hsync_len == 64 lmargin=0x161-0x13f=34 + PANEL_VERTICAL_TOTAL, 0x010800f0); + PANEL_VERTICAL_SYNC, 0x00020104); vsync=2, upper_margin=0x0104-0xf0-1= 19 + +In bdlogo.bmp - offset 436 is pixel data + +Sharp 5.7 active + + STUFFREG( hTotalReg, 0x01800140 ); // should be 16+320+1+8-1 == 0x158 + + 0x13f (width-1) + STUFFREG( hSyncReg, 0x0008014f ); hsync_len == 8 lmargin=0x14f-0x13f=16 + STUFFREG( vTotalReg, 0x010700F0 ); + STUFFREG( vSyncReg, 0x00020100 ); vsync=2, upper_margin=0x0100-0xf0+1= 17 + +static unsigned const hTotalReg = 0x00080024 ; // 015F0140 +static unsigned const hSyncReg = 0x00080028 ; // 0008014f +static unsigned const vTotalReg = 0x0008002c ; // 010700F0 +static unsigned const vSyncReg = 0x00080030 ; // 000200FE + +const unsigned int sm501_list2[]={0x0fe80000, +dispctrl 0x0F013104, // 0f0d0105 +pan 0x00000000, +colorkey 0x00000000, +fbaddr 0x00000000, +offsetww ((LCD_XRES)<<16)+(LCD_XRES), +fbwidth (LCD_XRES<<16), +fbheight (LCD_YRES<<16), +tllocate 0x00000000, +brlocate ((LCD_YRES-1)<<16)+(LCD_XRES-1), +htotal ((LCD_BEGIN_OF_LINE_WAIT_COUNT+ + LCD_XRES+ + LCD_END_OF_LINE_WAIT_COUNT+ + LCD_HORIZONTAL_SYNC_PULSE_WIDTH-1)<<16) + +(LCD_XRES-1), +hsync (LCD_HORIZONTAL_SYNC_PULSE_WIDTH<<16) + +(LCD_XRES+LCD_BEGIN_OF_LINE_WAIT_COUNT-1), +vtotal ((LCD_BEGIN_FRAME_WAIT_COUNT+ + LCD_YRES+ + LCD_END_OF_FRAME_WAIT_COUNT+ + LCD_VERTICAL_SYNC_PULSE_WIDTH-1)<<16) + +(LCD_YRES-1), +vsync (LCD_VERTICAL_SYNC_PULSE_WIDTH<<16) + +(LCD_YRES+LCD_BEGIN_FRAME_WAIT_COUNT-1)}; +*/ + +static struct lcd_panel_info_t const lcd_panels_[] = { + + /* char const *name */ { "hitachi_qvga" + /* unsigned long pixclock */ , 0 + /* unsigned short xres */ , 320 + /* unsigned short yres */ , 240 + /* unsigned char act_high */ , 1 + /* unsigned char hsync_len */ , 64 + /* unsigned char left_margin */ , 1 + /* unsigned char right_margin */ , 16 + /* unsigned char vsync_len */ , 20 + /* unsigned char upper_margin */ , 8 + /* unsigned char lower_margin */ , 3 + /* unsigned char active */ , 1 + /* unsigned char crt */ , 0 } + + /* char const *name */ , { "sharp_qvga" + /* unsigned long pixclock */ , 0 + /* unsigned short xres */ , 320 /* , 320 */ + /* unsigned short yres */ , 240 /* , 240 */ + /* unsigned char act_high */ , 1 /* , 1 */ + /* unsigned char hsync_len */ , 20 /* , 8 */ + /* unsigned char left_margin */ , 1 /* , 16 */ + /* unsigned char right_margin */ , 30 /* , 1 */ + /* unsigned char vsync_len */ , 4 /* , 20 */ + /* unsigned char upper_margin */ , 17 /* , 17 */ + /* unsigned char lower_margin */ , 3 /* , 3 */ + /* unsigned char active */ , 1 /* , 1 */ + /* unsigned char crt */ , 0 } + + /* char const *name */ , { "qvga_portrait" + /* unsigned long pixclock */ , 0 + /* unsigned short xres */ , 240 + /* unsigned short yres */ , 320 + /* unsigned char act_high */ , 1 + /* unsigned char hsync_len */ , 64 + /* unsigned char left_margin */ , 34 + /* unsigned char right_margin */ , 1 + /* unsigned char vsync_len */ , 20 + /* unsigned char upper_margin */ , 8 + /* unsigned char lower_margin */ , 3 + /* unsigned char active */ , 1 + /* unsigned char crt */ , 0 + /* unsigned rotation */ , 90 } + + /* char const *name */ , { "hitachi_hvga" + /* unsigned long pixclock */ , 1 + /* unsigned short xres */ , 640 + /* unsigned short yres */ , 240 + /* unsigned char act_high */ , 1 + /* unsigned char hsync_len */ , 64 + /* unsigned char left_margin */ , 34 + /* unsigned char right_margin */ , 1 + /* unsigned char vsync_len */ , 20 + /* unsigned char upper_margin */ , 8 + /* unsigned char lower_margin */ , 3 + /* unsigned char active */ , 1 + /* unsigned char crt */ , 0 } + + /* char const *name */ , { "sharp_vga" + /* unsigned long pixclock */ , 1 + /* unsigned short xres */ , 640 + /* unsigned short yres */ , 480 + /* unsigned char act_high */ , 1 + /* unsigned char hsync_len */ , 64 + /* unsigned char left_margin */ , 60 + /* unsigned char right_margin */ , 60 + /* unsigned char vsync_len */ , 20 + /* unsigned char upper_margin */ , 34 + /* unsigned char lower_margin */ , 3 + /* unsigned char active */ , 1 + /* unsigned char crt */ , 0 } + + /* char const *name */ , { "hitachi_wvga" + /* unsigned long pixclock */ , 1 + /* unsigned short xres */ , 800 + /* unsigned short yres */ , 480 + /* unsigned char act_high */ , 1 + /* unsigned char hsync_len */ , 64 + /* unsigned char left_margin */ , 1 + /* unsigned char right_margin */ , 39 + /* unsigned char vsync_len */ , 20 + /* unsigned char upper_margin */ , 8 + /* unsigned char lower_margin */ , 3 + /* unsigned char active */ , 1 + /* unsigned char crt */ , 0 } +// Note that you can use the nifty tool at the +// following location to generate these values: +// http://www.tkk.fi/Misc/Electronics/faq/vga2rgb/calc.html +, { + name: "crt1024x768", + pixclock: 65000000, + xres: 1024, + yres: 768, + act_high : 0, + hsync_len: 136, + left_margin: 24, + right_margin: 160, + vsync_len: 6, + upper_margin: 3, + lower_margin: 29, + active : 0, + crt : 1 +} +, { + name: "hitachi_wxga", + pixclock: 1, + xres: 1024, + yres: 768, + act_high : 1, + hsync_len: 64, + left_margin: 1, + right_margin: 39, + vsync_len: 20, + upper_margin: 8, + lower_margin: 3, + active : 1, + crt : 0 +} +}; + +/* +. e +typedef enum _polarity_t +{ + POSITIVE, + NEGATIVE, +} +polarity_t; + +typedef struct _mode_table_t +{ + // Horizontal timing. + int horizontal_total; + int horizontal_display_end; + int horizontal_sync_start; + int horizontal_sync_width; + polarity_t horizontal_sync_polarity; + + // Vertical timing. + int vertical_total; + int vertical_display_end; + int vertical_sync_start; + int vertical_sync_height; + polarity_t vertical_sync_polarity; + + // Refresh timing. + long pixel_clock; + long horizontal_frequency; + long vertical_frequency; +} +mode_table_t; + + // 1024 x 768 + htotal dend hsstrt hsw hpolar vtot vdend vdstrt vsh vpolar pixclk hfreq vfreq +{ 1344, 1024, 1048, 136, NEGATIVE, 806, 768, 771, 6, NEGATIVE, 65000000, 48363, 60 }, +{ 1328, 1024, 1048, 136, NEGATIVE, 806, 768, 771, 6, NEGATIVE, 75000000, 56476, 70 }, +{ 1312, 1024, 1040, 96, POSITIVE, 800, 768, 769, 3, POSITIVE, 78750000, 60023, 75 }, +{ 1376, 1024, 1072, 96, POSITIVE, 808, 768, 769, 3, POSITIVE, 94500000, 68677, 85 }, + +0FE80200/00010000 + CRT regs +0FE80204/00180000 + +0FE80208/08000800 + +0FE8020C/05D003FF + +0FE80210/00C80424 + +0FE80214/032502FF + +0FE80218/00060302 + +0FE8021C/00000000 + +0FE80220/00000000 + +0FE80224/00400200 + +0FE80228/00000000 + +0FE8022C/00000000 + +0FE80230/00000800 + +0FE80234/00000000 + +0FE80238/08000000 + +0FE8023C/00000400 + +*/ + +struct lcd_panel_info_t const * const lcd_panels = lcd_panels_ ; +unsigned const num_lcd_panels = sizeof(lcd_panels_)/sizeof(lcd_panels_[0]); + +struct lcd_panel_info_t const *find_lcd_panel( char const * name ) +{ + unsigned i ; + for( i = 0 ; i < num_lcd_panels ; i++ ) + { + if( 0 == strcmp( lcd_panels_[i].name, name ) ) + return lcd_panels_+i ; + } + return 0 ; +} + +struct lcd_panel_info_t const *cur_lcd_panel = 0 ; diff -u -r --new-file u-boot-1.1.2/common/Makefile u-boot-1.1.2-neon/common/Makefile --- u-boot-1.1.2/common/Makefile 2004-12-16 18:35:57.000000000 +0100 +++ u-boot-1.1.2-neon/common/Makefile 2007-08-11 21:07:20.000000000 +0200 @@ -35,16 +35,16 @@ cmd_eeprom.o cmd_elf.o cmd_ext2.o \ cmd_fat.o cmd_fdc.o cmd_fdos.o cmd_flash.o cmd_fpga.o \ cmd_i2c.o cmd_ide.o cmd_immap.o cmd_itest.o cmd_jffs2.o \ - cmd_load.o cmd_log.o \ + cmd_lcdpanel.o cmd_load.o cmd_log.o \ cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \ - cmd_nand.o cmd_net.o cmd_nvedit.o \ + cmd_nand.o cmd_net.o cmd_not.o cmd_nvedit.o \ cmd_pci.o cmd_pcmcia.o cmd_portio.o \ cmd_reginfo.o cmd_reiser.o cmd_scsi.o cmd_spi.o cmd_universe.o cmd_usb.o cmd_vfd.o \ command.o console.o devices.o dlmalloc.o docecc.o \ environment.o env_common.o \ env_nand.o env_dataflash.o env_flash.o env_eeprom.o env_nvram.o env_nowhere.o exports.o \ - flash.o fpga.o \ - hush.o kgdb.o lcd.o lists.o lynxkdi.o \ + flash.o fnmatch.o fpga.o \ + hush.o kgdb.o lcd.o lcd_panels.o lists.o lynxkdi.o \ memsize.o miiphybb.o miiphyutil.o \ s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o \ usb.o usb_kbd.o usb_storage.o \ diff -u -r --new-file u-boot-1.1.2/config.mk u-boot-1.1.2-neon/config.mk --- u-boot-1.1.2/config.mk 2004-10-10 00:21:30.000000000 +0200 +++ u-boot-1.1.2-neon/config.mk 2007-08-11 21:07:20.000000000 +0200 @@ -22,6 +22,7 @@ # ######################################################################### +sinclude select.mk # include DISPLAY_TYPE, HARDWARE_TYPE, SOFTWARE_TYPE, INCLUDE_MINIDEBUG # clean the slate ... PLATFORM_RELFLAGS = @@ -106,11 +107,15 @@ OPTFLAGS= -Os #-fomit-frame-pointer ifndef LDSCRIPT #LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug +ifeq ($(INCLUDE_MINIDEBUG),y) +LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-bootmini.lds +else LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds endif +endif OBJCFLAGS += --gap-fill=0xff -gccincdir := $(shell $(CC) -print-file-name=include) +gccincdir := "$(shell $(CC) -print-file-name=include)" CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) \ -D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \ @@ -170,11 +175,19 @@ ######################################################################### +ifdef LISTINGS +%.s: %.S + $(CPP) $(AFLAGS) -Wa,-alh=$(basename $<).lst -o $@ $(CURDIR)/$< +%.o: %.S + $(CC) $(AFLAGS) -c -Wa,-alh=$(basename $<).lst -o $@ $(CURDIR)/$< +%.o: %.c + $(CC) $(CFLAGS) -c -Wa,-alh=$(basename $<).lst -o $@ $< +else %.s: %.S $(CPP) $(AFLAGS) -o $@ $(CURDIR)/$< %.o: %.S $(CC) $(AFLAGS) -c -o $@ $(CURDIR)/$< %.o: %.c $(CC) $(CFLAGS) -c -o $@ $< - +endif ######################################################################### diff -u -r --new-file u-boot-1.1.2/Configure u-boot-1.1.2-neon/Configure --- u-boot-1.1.2/Configure 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/Configure 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,170 @@ +#!/bin/bash +#======================================================================= +DISPLAY_TYPE_CHOICES="DA640X240 DA320X240 DA800X480 DA640X480 DA240X320 DA800X600 DA1024X768 DP320X240 DP480X320 DL122X32" +PLATFORM_TYPE_CHOICES="NEONB NEON HALOGEN BD2003 GAME_WITH_SMC GAME_CONTROLLER" +# BOUNDARY_OLD_BOARD #lcd pin reordering for rgb problem, don't use VLIO(gp18 is turnstile) +# OLD_GAME_CONTROLLER GAME_CONTROLLER_PLAITED_A1 +REVISION_CHOICES="1 2" + +SOFTWARE_TYPE_CHOICES="WINCE LINUX GAME" +INCLUDE_MINIDEBUG_CHOICES="y n" +CPU_CLOCK_CHOICES="100 200 300 400" +CPU_CLOCK_PXA270_CHOICES="104 208 312 416 520 624" + +CONFIG_H=include/configs/select.h +CONFIG_MK=select.mk +CONFIG_LOG=select.log + +fail () +{ + echo "" + echo "Configuration failed." + echo "" + exit 1 +} + +if [ -f $CONFIG_MK ] ; then +. ./$CONFIG_LOG +fi + + + +#======================================================================= + + +arg () { + VALUE="`echo X"$2" | sed -e 's/^X--[a-zA-Z_]*=//'`" + eval $1=\"$VALUE\" + eval $1_P='y' +} + +usage () { + echo "bad parameters" + exit 1 +} + +while [ $# -gt 0 ] ; do + case "$1" in + --DISPLAY_TYPE=*) arg DISPLAY_TYPE $1 ;; + --PLATFORM_TYPE=*) arg PLATFORM_TYPE $1 ;; + --SOFTWARE_TYPE=*) arg SOFTWARE_TYPE $1 ;; + --INCLUDE_MINIDEBUG=*) arg INCLUDE_MINIDEBUG $1 ;; + --CPU_CLOCK=*) arg CPU_CLOCK $1 ;; + *) usage ;; + esac + shift +done + +#======================================================================= + +write_str () { + value=`eval echo '$'$1` + echo "$1=$value" >> $CONFIG_MK + echo "$1=\"$value\"" >> $CONFIG_LOG + if [ x$3 != x ] ; then + choices=`eval echo '$'$2` + str="" + for a in $choices ; do + if [ -n "$str" ] ; then str="$str && " ; fi + str="$str!defined($3$a)"; + done + echo "#if $str" >> $CONFIG_H + echo "#define $3$value" >> $CONFIG_H + echo "#endif" >> $CONFIG_H + else + echo "#ifndef $1" >> $CONFIG_H + echo "#define $1 $value" >> $CONFIG_H + echo "#endif" >> $CONFIG_H + fi +} + +prompt () { + eval $3=\"$2\" + /bin/echo -e "$1 [$2]: \c" + read tmp + if [ -n "$tmp" ] ; then eval $3=\"$tmp\" ; fi + if [ ! -t 1 ] ; then echo $3 ; fi +} +noprompt () { + eval $3=\"$2\" + /bin/echo -e "$1 [$2]: " + if [ ! -t 1 ] ; then echo $3 ; fi +} + + +ask_str () { + choices=`eval echo '$'$3` + default=`eval echo '$'$2` + ppp=`eval echo '$'$2_P` + ans="" + stop="0" + if [ x$ppp = x"y" ] ; then + noprompt "$1 ($choices)" "$default" answer + for a in $choices ; do + if [ x$a = x$answer ] ; then ans=$a; stop="1"; break; fi; + done + if [ $stop != "1" ] ; then default=""; fi; + fi + while [ $stop != "1" ] ; do + prompt "$1 ($choices)" "$default" answer + for a in $choices ; do + if [ x$a = x$answer ] ; then ans=$a; stop="1"; break; fi; + done + done + eval $2=\"$ans\" +} +#======================================================================= + +echo "" +echo " -------- U-Boot Boundary Devices Specific Configuration Script --------" +echo "" +echo "" + +ask_str "Choose display type" DISPLAY_TYPE DISPLAY_TYPE_CHOICES +ask_str "Choose hardware type" PLATFORM_TYPE PLATFORM_TYPE_CHOICES + if [ x$PLATFORM_TYPE = xHALOGEN ] ; then +ask_str "Choose hardware revision" PLATFORM_REV REVISION_CHOICES + fi +ask_str "Choose software type" SOFTWARE_TYPE SOFTWARE_TYPE_CHOICES +ask_str "Include minidebug" INCLUDE_MINIDEBUG INCLUDE_MINIDEBUG_CHOICES + + if [ x$PLATFORM_TYPE = xHALOGEN ] ; then +ask_str "CPU clock" CPU_CLOCK CPU_CLOCK_PXA270_CHOICES + else +ask_str "CPU clock" CPU_CLOCK CPU_CLOCK_CHOICES + fi + +rm -f $CONFIG_H $CONFIG_MK + +cat << 'EOF' > $CONFIG_H +/* + Automatically generated by 'make xxx_config' -- don't edit! +*/ +#include +EOF + +cat << 'EOF' > $CONFIG_MK +# +# Automatically generated by 'make xxx_config' -- don't edit! +# +EOF + +cat << 'EOF' > $CONFIG_LOG +#!/bin/bash +EOF + +chmod 777 $CONFIG_LOG + +write_str DISPLAY_TYPE DISPLAY_TYPE_CHOICES +write_str PLATFORM_TYPE PLATFORM_TYPE_CHOICES + if [ x$PLATFORM_TYPE = xHALOGEN ] ; then +write_str PLATFORM_REV REVISION_CHOICES + fi +write_str SOFTWARE_TYPE SOFTWARE_TYPE_CHOICES +write_str INCLUDE_MINIDEBUG INCLUDE_MINIDEBUG_CHOICES + if [ x$PLATFORM_TYPE = xHALOGEN ] ; then +write_str CPU_CLOCK CPU_CLOCK_PXA270_CHOICES + else +write_str CPU_CLOCK CPU_CLOCK_CHOICES + fi +echo "Configuration successful." diff -u -r --new-file u-boot-1.1.2/cpu/mpc8xx/lcd.c u-boot-1.1.2-neon/cpu/mpc8xx/lcd.c --- u-boot-1.1.2/cpu/mpc8xx/lcd.c 2004-10-10 01:26:00.000000000 +0200 +++ u-boot-1.1.2-neon/cpu/mpc8xx/lcd.c 2007-08-11 21:07:20.000000000 +0200 @@ -255,7 +255,6 @@ /*----------------------------------------------------------------------*/ -int lcd_line_length; int lcd_color_fg; int lcd_color_bg; diff -u -r --new-file u-boot-1.1.2/cpu/pxa/config.mk u-boot-1.1.2-neon/cpu/pxa/config.mk --- u-boot-1.1.2/cpu/pxa/config.mk 2003-05-23 14:36:21.000000000 +0200 +++ u-boot-1.1.2-neon/cpu/pxa/config.mk 2007-08-11 21:15:47.000000000 +0200 @@ -21,8 +21,19 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # - -PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ - -mshort-load-bytes -msoft-float - -PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4 -mtune=strongarm1100 ++sinclude ../../select.mk # include DISPLAY_TYPE, HARDWARE_TYPE, SOFTWARE_TYPE, INCLUDE_MINIDEBUG ++ ++PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 ++PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4 ++GCC_MAJOR := $(shell $(CC) -v 2>&1 | grep version | cut -d' ' -f3 | cut -d'.' -f1) ++GCC_MINOR := $(shell $(CC) -v 2>&1 | grep version | cut -d' ' -f3 | cut -d'.' -f2) ++ ++ifneq ($(GCC_MAJOR),3) ++ PLATFORM_CPPFLAGS += -mtune=strongarm1100 ++ PLATFORM_RELFLAGS += -msoft-float ++else ++ PLATFORM_CPPFLAGS += -mtune=xscale ++ ifneq ($(GCC_MINOR),4) ++ PLATFORM_RELFLAGS += -msoft-float ++ endif ++endif diff -u -r --new-file u-boot-1.1.2/cpu/pxa/cpu.c u-boot-1.1.2-neon/cpu/pxa/cpu.c --- u-boot-1.1.2/cpu/pxa/cpu.c 2004-02-08 20:38:44.000000000 +0100 +++ u-boot-1.1.2-neon/cpu/pxa/cpu.c 2007-08-11 21:07:20.000000000 +0200 @@ -33,6 +33,7 @@ #include #include #include +#include int cpu_init (void) { @@ -59,8 +60,12 @@ unsigned long i; + MMC_STRPCL = MMC_STRPCL_STOP_CLK; + disable_interrupts (); + dcache_disable(); + /* turn off I-cache */ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); i &= ~0x1000; @@ -129,21 +134,6 @@ return (i & 0x1000); } -/* we will never enable dcache, because we have to setup MMU first */ -void dcache_enable (void) -{ - return; -} - -void dcache_disable (void) -{ - return; -} - -int dcache_status (void) -{ - return 0; /* always off */ -} void set_GPIO_mode(int gpio_mode) { diff -u -r --new-file u-boot-1.1.2/cpu/pxa/Makefile u-boot-1.1.2-neon/cpu/pxa/Makefile --- u-boot-1.1.2/cpu/pxa/Makefile 2003-06-16 00:40:43.000000000 +0200 +++ u-boot-1.1.2-neon/cpu/pxa/Makefile 2007-08-11 21:07:20.000000000 +0200 @@ -23,10 +23,45 @@ include $(TOPDIR)/config.mk +CPU_TYPE=xscale + +ifeq ($(SOFTWARE_TYPE),WINCE) +STACKS_VALID = -DCONFIG_STACKS_VALID +else + +ifeq ($(SOFTWARE_TYPE),GAME) +STACKS_VALID = -DCONFIG_STACKS_VALID +else +STACKS_VALID = +endif +endif +ARM_ELF_GCC ?= arm-elf-gcc + LIB = lib$(CPU).a -START = start.o -OBJS = serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o +ifeq ($(INCLUDE_MINIDEBUG),y) +START = minidebug.o ministart.o +else +START = start.o ministart.o +endif +OBJS = serial.o interrupts.o cpu.o i2c.o mmc.o + +ifdef PXALCD + OBJS += pxafb.o +endif + +ifeq ($(PLATFORM_TYPE),HALOGEN) + OBJS += usb_ohci.o +else +ifeq ($(PLATFORM_TYPE),NEON) + OBJS += usb_ohci.o +else +ifeq ($(PLATFORM_TYPE),NEONB) + OBJS += usb_ohci.o +else +endif +endif +endif all: .depend $(START) $(LIB) @@ -35,9 +70,13 @@ ######################################################################### -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +.depend: Makefile $(START) $(OBJS) + $(CC) -M $(CFLAGS) -DUBOOT=1 $(START:.o=.S) $(OBJS:.o=.c) > $@ sinclude .depend +minidebug.o : minidebug.S Makefile + $(ARM_ELF_GCC) -c $(D_GNUC) -DUBOOT=1 -DDISPLAY_TYPE=$(DISPLAY_TYPE) -DPLATFORM_TYPE=$(PLATFORM_TYPE) -DPLATFORM_REV=$(PLATFORM_REV) -DSOFTWARE_TYPE=$(SOFTWARE_TYPE) $(STACKS_VALID) -DCPU_CLOCK=$(CPU_CLOCK) \ + $(SOFT_FLOAT) -I$(TOPDIR)/include -mtune=$(CPU_TYPE) -mcpu=$(CPU_TYPE) -o $@ $< + ######################################################################### diff -u -r --new-file u-boot-1.1.2/cpu/pxa/minidebug.S u-boot-1.1.2-neon/cpu/pxa/minidebug.S --- u-boot-1.1.2/cpu/pxa/minidebug.S 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/cpu/pxa/minidebug.S 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,3850 @@ + .nolist + .ifdef __ARMASM +UBOOT EQU 0 +CONFIG_UNSCRAMBLE_LCD EQU 0 +LCD_REORDER_BLUE EQU 1 + .endif + +#ifdef UBOOT +#include +#include +#include +#include +#include +#include +#else +#include "platformTypes.h" +#include "pxaGpio.h" +#include "pxaMacro3.h" +#include "miniMac.inc" +#include "burn.inc" + .ifdef __ARMASM + STARTUPTEXT + EXTERN HeadStart + .endif +#endif + + .list + .global StartUp + + +#define L1(a) ((CH_##a)) +#define L2(a,b) ((CH_##a)+(CH_##b<<8)) +#define L3(a,b,c) ((CH_##a)+(CH_##b<<8)+(CH_##c<<16)) +#define L4(a,b,c,d) ((CH_##a)+(CH_##b<<8)+(CH_##c<<16)+(CH_##d<<24)) + +#define C2(a,b) ((CH_##a<<8)+(CH_##b)) +#define C3(a,b,c) ((CH_##a<<16)+(CH_##b<<8)+(CH_##c)) +#define C4(a,b,c,d) ((CH_##a<<24)+(CH_##b<<16)+(CH_##c<<8)+(CH_##d)) + +// ******************************************************************************************* +// ******************************************************************************************* + + +//.global _start +//_start: +StartUp: + b V_Reset //0 + b V_UndefinedInstr //4 + b V_SWI //8 + b V_PrefetchAbort //0x0c + b V_DataAbort //0x10 + b V_Unused //0x14, not used + b V_IRQ //0x18 +// b V_FIQ //0x1c + +//In Linux, all modes switch almost immediately to the SVC mode +//and it is the only one with a valid stack +//FIQ & SWI stacks are always assumed valid +V_FIQ: + V_VectorEntrance V_rWork,V_rBranch,SIG_FIQ + +join_fiq: + CheckBranch V_rWork,V_rBranch + V_VectorExitCC V_rWork,V_rBranch,eq,eqia + CheckLdr V_rWork,V_rBranch + V_VectorExitCC1 V_rWork,V_rBranch,cc,ccia +join_fiq2: + sub sp,sp,#(DEBUG_SPACE-DBG_R0) //the extra 12 bytes already on stack are needed for indirect return for SDS bug + stmia sp,{r0,r1} + sub r1,V_rBranch,#8 //restore to SIG_xxx value + add r0,sp,#(DEBUG_SPACE-DBG_R0) + ldr V_rWork,[r0],#4 + ldr V_rBranch,[r0],#8 + str r0,[sp,#DBG_HSP-DBG_R0] + sub r0,sp,#DBG_R0 +join_fiq3: + mov r1,r1,LSR #2 + and r1,r1,#0xf + b SaveRest2 +V_Reset: +//this is either a normal processor reset, or a debug exception in halt mode + mrs sp,cpsr + and sp,sp,#0x1f + cmp sp,#0x15 + bne 2f +//this is a debug exception in halt mode + CP14_DCSR mrc,sp + and sp,sp,#0x1c + cmp sp,#0 //reset + cmpne sp,#5<<2 //vector trap (reset vector) + bne 10f //initialization already done + + BigMov sp,PWR_MANAGER_BASE + ldr sp,[sp,#RCSR] + tst sp,#2 + tsteq pc,#0xff000000 + bne 2f //br if watchdog reset or if not nCS0 address + +//signal debugger that he can download into main instruction cache now + CP14_TX mcr,sp +1: + CP14_TXRXCTRL mrc,r15 //r15 means update condition codes + bpl 1b + CP14_RX mrc,sp //just read and discard +2: + CP14_DCSR mrc,sp + orr sp,sp,#1<<31 //set global debug enable bit + CP14_DCSR mcr,sp + +// InitGPIO r0,sp +// InitIC_Clocks r0,sp +// InitUART r0,sp,UART_BASE,BAUDRATE +// TransMacro L1(U) + b MainInitializationCode //this can be in the main instruction cache not locked + //because it is only executed upon reset + +10: + cmp sp,#1<<2 //Instruction breakpoint + mov sp,r0 //save r0 + BigMov r0,DEBUG_BASE + str sp,[r0,#DBG_R0] + str r1,[r0,#DBG_R1] + str r2,[r0,#DBG_R2] +SSDebug: + bne 11f +//this is a breakpoint + ldr r1,[r0,#DBG_TRACE] + tst r1,#1 + beq 11f + cmn r1,#1 + moveq r1,#0 + CP15_IBCR1 mrc,sp + sub r2,lr,#3 + cmp sp,r2 + CP15_IBCR1 mcreq,r1 //remove breakpoint if single-stepping + beq 11f + CP15_IBCR0 mrc,sp + cmp sp,r2 + CP15_IBCR0 mcreq,r1 +11: + mrs r2,spsr + sub lr,lr,#4 + + str r3,[r0,#DBG_R3] + ldrb r3,[r0,#DBG_Mode] +SaveDebug: + CP14_DCSR mrc,sp +// str sp,[r0,#DBG_Temp] //the mcr CP14_DCSR instruction below will trash sp in SDS (special debug state) + and r1,sp,#0x1c + orr sp,sp,#0x1c + CP14_DCSR mcr,sp + mov r1,r1,LSR #2 + add r1,r1,#SIG_DBG + b SaveR4andUp + +V_UndefinedInstr: + VectorEntrance rWork,rBranch,SIG_UNDEFINED_INSTRUCTION + JOIN b +V_IRQ: + VectorEntrance rWork,rBranch,SIG_IRQ + + .if STACKS_VALID + JOIN b + .else +join_irq: + CheckBranch I_rWork,I_rBranch + I_VectorExitCC I_rWork,I_rBranch,eq,eqia + + CheckLdr I_rWork,I_rBranch + I_VectorExitCC1 I_rWork,I_rBranch,cc,ccia +join_irq2: + strd r0,[I_rWork,#DBG_R0-DBG_MAGIC] + sub r0,I_rWork,#DBG_MAGIC + sub r1,I_rBranch,#8 //restore to SIG_xxx value + ldr I_rWork,[r0,#DBG_TEMP] + add sp,r0,#DBG_INDIRECT_R0+8 //sp is trashed, if stacks assumed invalid + str sp,[r0,#DBG_HSP] + b join_fiq3 + .endif + +//sp is valid for this!!!!!, what a treat +V_SWI: + V_VectorEntrance V_rWork,V_rBranch,SIG_SWI + b join_fiq + +//monitor mode also has instruction breakpoint, bkpt instruction +V_PrefetchAbort: + VectorEntrance rWork,rBranch,SIG_PREFETCH_ABORT + CP15_FSR mrc,rWork + tst rWork,#1<<9 + bne DEBUG_EVENT //br if a debug event, in monitor mode + +//the 1st instruction after exiting special debug state can cause an abort or possibly the wrong instruction to execute. +//the Immu is not turned on until the 2nd instruction. + tst rWork,#1<<10 + JOIN beq + and rWork,rWork,#0xf + cmp rWork,#0x6 + JOIN bne //br if not an external abort + + CP15_CONTROL mrc,rWork //get the control register + tst rWork,#1 //test MMU + + BigMov rWork,DEBUG_BASE+DBG_ABORT_PC + swpne rWork,lr,[rWork] //save lr as a flag so not infinite errors, if mmu on + cmpne rWork,lr + + .if STACKS_VALID + ldrne rBranch,[sp,#4] + ldrne rWork,[sp],#12 + subnes pc,lr,#4 //retry access + .else + BigMov rWork,DEBUG_BASE+DBG_MAGIC + ldrne rWork,[rWork,#DBG_TEMP-DBG_MAGIC] + subnes pc,lr,#4 //retry access + .endif + + add rBranch,rBranch,#8 + JOIN2 b + +//stacks aren't kept valid +//monitor mode also has data breakpoint, external debug break, trace-buffer full break +V_DataAbort: + VectorEntrance rWork,rBranch,SIG_DATA_ABORT + CP15_FSR mrc,rWork + tst rWork,#1<<9 + JOIN beq + sub lr,lr,#4 //+8 of offending instruction for most data aborts instead of +4 +DEBUG_EVENT: + BigMov rWork,DEBUG_BASE+DBG_MAGIC + strd r0,[rWork,#DBG_R0-DBG_MAGIC] + sub r0,rWork,#DBG_MAGIC + + .if STACKS_VALID + ldr rWork,[sp],#4 + ldr rBranch,[sp],#8 + .else + ldr rWork,[r0,#DBG_TEMP] + add sp,r0,#DBG_INDIRECT_R0+8 //sp is trashed, if stacks assumed invalid + .endif + str sp,[r0,#DBG_HSP] + CP14_DCSR mrc,sp + and sp,sp,#0x1c + cmp sp,#1<<2 //Instruction breakpoint + str r2,[r0,#DBG_R2] + b SSDebug + +V_Unused: + mov sp,r0 //save r0 + BigMov r0,DEBUG_BASE + str sp,[r0,#DBG_R0] + str r1,[r0,#DBG_R1] + mov r1,#SIG_UNUSED +// b SaveRest2 + +//r0 - debug storage +//r1 - reason for getting here +SaveRest2: + str r2,[r0,#DBG_R2] + sub lr,lr,#4 + mrs r2,spsr + str r3,[r0,#DBG_R3] + ldrb r3,[r0,#DBG_Mode] +//r2 - spsr +//r3 - DBG_MODE - don't assume that ram is working upon reset +SaveR4andUp: + str r4,[r0,#DBG_R4] + str lr,[r0,#DBG_PC] //return PC + str r2,[r0,#DBG_CPSR] //return CPSR + mrs r4,cpsr + str r4,[r0,#DBG_HCPSR] //mode to return to before exception return + + tst r2,#0xf + orreq r2,r2,#0xdf //if user mode, switch to system mode to access user registers, set I, F + orrne r2,r2,#0xc0 //set I, F + msr cpsr_c,r2 + + add r2,r0,#DBG_R5 + stmia r2,{r5,r6,r7,r8,r9,sl,fp,ip,sp,lr} +// ********************************** +// ********************************** + + mov rDBG,r0 + mov r6,r1 //reason + mov r5,r3 //DBG_MODE + strb r2,[rDBG,#DBG_LastSignal] + CP15_CONTROL mrc,r1 //get the control register + tst r1,#1 + BigMov rUart,UART_BASE //this is right if MMU is off + blne GetUartAddress //if MMU is on + b gdb_lastSignal1 + +//r1 - CP15_CONTROL(r1) +GetUartAddress: + tst r1,#1<<13 //assume 1:1 mapping for TTBR if relocation vector is off +// see if identity mapping is enabled + CP15_TTBR mrc,r1 +// using Big will generate no instructions if Wince, throwing off my reloc vector +// BigAdd2Ne r1,(SDRAM_BASE_C_VIRTUAL-0xA0000000) + addne r1,r1,#(SDRAM_BASE_C_VIRTUAL-0xA0000000) //convert this physical address to a virtual address if relocation vector ON + + ldr r2,[r1,rUart,lsr #18] + sub r2,r2,rUart + cmp r2,#1<<20 + movcc pc,lr //identity mapping on + + mov r3,rUart + BigMov rUart,UART_VIRT_BASE +1: ldr r2,[r1,rUart,lsr #18] + tst r2,#3 + beq 2f + sub r2,r2,r3 + cmp r2,#1<<20 + movcc pc,lr //br if found virtual address + adds rUart,rUart,#1<<20 + moveq rUart,#0xE0000000 + b 1b +2: + BigOrr2 r3,0xc02 + str r3,[r1,rUart,lsr #18] //steal this unused entry +// b cache_clean_invalidate_all + +cache_clean_invalidate_all: +//flush data cache, if data cache is enabled + CP15_CONTROL mrc,r0 //get the control register + tst r0,#4 + moveq pc,lr //return if disabled + +// Set baseaddress as the 1st virtual address of a 32k range used only +// to flush the data cache. baseaddress should be aligned on a 32 byte(cache-line) boundary. +// If the virtual range beginning with baseaddress is used for any purpos other than flushing +// the data cache, then cachelinecount must be doubled from 1024 to 2048 + mov r1,#cachelinecount + ldr r0,[rDBG,#DBG_PC] //I hope my return address is mapped + BigBic2 r0,0xffff +1: + CP15_CF_ALLOC_LINE mcr,r0 //allocate a cache line for r0 + add r0,r0,#cachelinesize + subs r1,r1,#1 + bne 1b + +// teq r2, #0 // if running only from cache, an invalidate could be fatal if not done from minicache + // and then, a return to caller would not be allowed, so invalidate is postponed +// CP15_CF_INVAL_I mcrne,r0 + CP15_CF_DRAIN mcr,r0 + CP15_CF_INVAL_D mcr,r0 +// The instruction cache is guaranteed to be invalidated at this point. The +// next instruction sees the result of the invalidate command. + mov pc,lr + + +//r0 - value to printm r9 - chksum +PrintHexEndian: +#if LITTLE_ENDIAN + mov r2,#8 +1: mov r4,r0 + mov r3,lr +2: tst r2,#1 + moveq r0,r4,LSR #4 + andne r0,r4,#0xf + andeq r0,r0,#0xf + movne r4,r4,ROR #8 + cmp r0,#0xA + addcs r0,r0,#L1(a)-0x0a + addcc r0,r0,#L1(0) + add r9,r9,r0 + bl Transmit + subs r2,r2,#1 + bne 2b + mov pc,r3 + +PrintHexByteEndian: + mov r2,#2 + b 1b +#else + mov r2,#8 + mov r4,r0 +1: mov r3,lr +2: mov r4,r4,ROR #28 + and r0,r4,#0xf + cmp r0,#0xA + addcs r0,r0,#L1(a)-0x0a + addcc r0,r0,#L1(0) + add r9,r9,r0 + bl Transmit + subs r2,r2,#1 + bne 2b + mov pc,r3 +PrintHexByteEndian: + mov r4,r0,LSL #24 + mov r2,#2 + b 1b +#endif + +PrintHexByte: + mov r4,r0,LSL #24 + mov r2,#2 + b PrintHex1 + +TransmitCRLF: + BigMov r0,L2(CR,LF) + b Transmit + + + .if STACKS_VALID + .else +// ******************************************************* + RelocationVector 0 +// ******************************************************* + .endif + + +//IN: r0 - value to print +//OUT: r0-r4 trashed +PrintHex: + mov r2,#8 + mov r4,r0 +PrintHex1: + mov r3,lr +1: mov r4,r4,ROR #28 + and r0,r4,#0xf + cmp r0,#0xA + addcs r0,r0,#L1(A)-0x0a + addcc r0,r0,#L1(0) + bl Transmit + subs r2,r2,#1 + bne 1b + mov pc,r3 + + +TransmitSPACE: + mov r0,#L1(SPACE) +// b Transmit + +//IN: r0 - character to transmit +//OUT: r0 - last character transmitted, r1 - trashed +Transmit1: +Transmit: +1: ldr r1,[rUart,#UART_LSR] + ands r1,r1,#0x20 + beq 1b + mov r1,r0 + and r1,r1,#0xff + str r1,[rUart,#UART_THR] + movs r1,r0,LSR #8 + movne r0,r1 + bne 1b + mov pc,lr //return + +TransmitChkSum: + add r9,r9,r0 + b Transmit + + .if STACKS_VALID +// ******************************************************* + RelocationVector 2 +// ******************************************************* + .endif + +//OUT: +//z-0 good data in r0 +//z-1 timeout, r0 is 0 +//r1 - loop cnt time remaining +Receive: + mov r1,#RECEIVE_LOOP_COUNT +Receive1: +1: ldr r0,[rUart,#UART_LSR] + ands r0,r0,#0x1 + ldrne r0,[rUart,#UART_RBR] + movne pc,lr //return + + subs r1,r1,#1 + bne 1b + mov pc,lr //return + + + + +//IN: r2 - symbol # +//OUT: r1:r0 - value, +GetRegVal: + cmp r2,#SYM_FP0 + bcs GetSpecialReg +#if DBG_R0 + add r1,rDBG,#DBG_R0 + ldr r0,[r1,r2,LSL #2] +#else + ldr r0,[rDBG,r2,LSL #2] +#endif + mov r1,#0 + mov pc,lr + +// ******************************************************************** +// ******************************************************************** +// ******************************************************************** + + +gdb_lastSignal: + ldrb r6,[rDBG,#DBG_LastSignal] + ldrb r5,[rDBG,#DBG_Mode] +gdb_lastSignal1: + ldr r0,[rUart,#UART_LCR] + strb r0,[rDBG,#DBG_FFUART_LCR] + bic r0,r0,#0x80 //make sure DLAB is clear + str r0,[rUart,#UART_LCR] + + +1: mov r9,#0 //chksum + mov r0,#L1(DOLLAR) + bl Transmit +// mov r0,#L1(T) + mov r0,#L1(S) + bl TransmitChkSum + mov r0,r6 + bl PrintHexByteEndian +// mov r0,#L1(F) +// bl TransmitChkSum +// mov r0,#L1(COLON) +// bl TransmitChkSum +// mov r2,#SYM_PC +// bl GetRegVal +// bl PrintHexEndian + + mov r0,#L1(POUND) + bl Transmit + and r0,r9,#0xff + bl PrintHexByteEndian + mov r3,#0 + mov r1,#RECEIVE_LOOP_COUNT +10: + bl Receive1 //z-0 good data in r0, z-1 timeout, r0 is 0 + moveq rNum1,#0 + beq 12f //br if timeout + cmpne r6,#SIG_RESET //disable cr abort on power up +// beq 10b //uncomment to stop from stopping + + cmp r0,#L1(PLUS) + beq WaitForDollarSign + cmp r0,#L1(DOLLAR) + beq ReadGDB + + cmp r0,#L1(MINUS) + beq 1b + tst r5,#1 + cmpeq r0,#GDB_EXIT_CHAR + bne 10b //br if in GDB mode or NOT + mov rNum1,#1 + +//r6 -SIG_xxx +12: + bl TransmitCRLF + cmp r6,#SIG_DBG + BigMov r0,L4(D,B,G,MINUS) + blcs Transmit1 + + mov r2,#0 + mov r3,#0 + mov r4,#0 + cmp r6,#SIG_RESET + cmpne r6,#SIG_DBG_RESET + BigMovEq r0,L4(R,e,s,e) + BigMovEq r2,L1(t) + cmp r6,#SIG_UNDEFINED_INSTRUCTION + BigMovEq r0,L4(U,n,d,e) + BigMovEq r2,L1(f) +// BigMovEq r3,L1(d) + cmp r6,#SIG_SWI + BigMovEq r0,L3(S,w,i) + cmp r6,#SIG_PREFETCH_ABORT + BigMovEq r0,L4(P,r,e,f) + BigMovEq r2,L4(e,t,c,h) + cmp r6,#SIG_DATA_ABORT + BigMovEq r0,L4(D,a,t,a) + cmpne r6,#SIG_PREFETCH_ABORT + BigMovEq r3,L4(SPACE,A,b,o) + BigMovEq r4,L2(r,t) + cmp r6,#SIG_UNUSED + BigMovEq r0,L4(U,n,u,s) + BigMovEq r2,L2(e,d) + cmp r6,#SIG_IRQ + BigMovEq r0,L3(I,r,q) + cmp r6,#SIG_FIQ + BigMovEq r0,L3(F,i,q) + cmp r6,#SIG_DBG_INSTRUCTION_BKPT + BigMovEq r0,L4(I,n,s,t) + BigMovEq r2,L4(SPACE,B,r,k) + cmp r6,#SIG_DBG_DATA_BKPT + BigMovEq r0,L4(D,a,t,a) + BigMovEq r2,L4(SPACE,B,r,k) + cmp r6,#SIG_DBG_BKPT_SOFTWARE + BigMovEq r0,L4(B,k,p,t) + cmp r6,#SIG_DBG_EXTERNAL + BigMovEq r0,L4(E,x,t,e) + BigMovEq r2,L4(r,n,a,l) + cmp r6,#SIG_DBG_VECTOR_TRAP + BigMovEq r0,L4(V,e,c,t) + BigMovEq r2,L4(o,r,SPACE,T) + BigMovEq r3,L3(r,a,p) + cmp r6,#SIG_DBG_TRACE_BUFFER_FULL + BigMovEq r0,L4(T,r,a,c) + BigMovEq r2,L4(e,SPACE,F,u) + BigMovEq r3,L2(l,l) + cmp r6,#SIG_DBG_RESERVED + BigMovEq r0,L4(R,e,s,e) + BigMovEq r2,L4(r,v,e,d) + + bl Transmit1 + movs r0,r2 + blne Transmit1 + movs r0,r3 + blne Transmit1 + movs r0,r4 + blne Transmit1 + + bl TransmitSPACE + mov r2,#SYM_PC + bl GetRegVal + bl PrintHex +// bl TransmitSPACE + bl TransmitCRLF + + rsbs r0,pc,#0x800 + BigMov r0,FLASH_READ_CMD + +#if (PLATFORM_TYPE==NEONB) + BigMov r1,VIRTUAL_CS1 //remember, although instruction fetches are physical, data are still virtual +#else + BigMov r1,VIRTUAL_CS0 //remember, although instruction fetches are physical, data are still virtual +#endif + cmphs rUart,#0x41000000 + strhs r0,[r1] //if (pc is in minicache) & (rUart is in virtual memory) then + //make sure flash is in read mode, we are almost off the minicache + +#if (PLATFORM_TYPE==NEONB) + adr lr,AfterPCPrint + add r1,r1,lr //virtual address of AfterPCPrint if in Linux for data fetch + cmp lr,#0x800 + BigOrr2Eq lr,FLASH_BASE_ADDRESS //if in low part of CS0 flash, try CS1 flash + BigMov r0,0xe3a00055 //instruction mov r0,#55 + cmp rUart,#0x41000000 + movlo r1,lr //use physical address of AfterPCPrint for data fetch + ldr r2,[r1] + cmp r2,r0 + moveq pc,lr //br if CS1 valid + b AfterPCPrint_error +#else + b AfterPCPrint1 +#endif + +// ****************************************************************************************** +//A MAIN goal is for all the code above this point to fit into the 2k mini instruction cache +//So that if difficult errors occur and the flash isn't functioning properly, we can +//at least get the PC printed out before a crash. +// ****************************************************************************************** + + +//IN: r2 - symbol #, z-1 if SYM_FP0 +//OUT: r1:r0 - value, +GetSpecialReg: + bne 2f +//MRA{} ,,acc0 + mra r0,r1,acc0 + mov pc,lr + + .if STACKS_VALID + .else +//Must keep this aligned at 0x800 if Bal + mac_AfterPCPrint 1 + .endif + +2: cmp r2,#SYM_FSR + CP15_FSR mrceq,r0 + cmp r2,#SYM_FAR + CP15_FAR mrceq,r0 + cmp r2,#SYM_DCSR + CP14_DCSR mrceq,r0 + cmp r2,#SYM_TTBR + CP15_TTBR mrceq,r0 + cmp r2,#SYM_CTRL + CP15_CONTROL mrceq,r0 + mov r1,#0 + mov pc,lr + +//out: c-1 means hex char, r0 - character read, r1 - 0:15 if r0 is a hex character +ReadHex: +1: ldr r0,[rUart,#UART_LSR] + ands r0,r0,#0x1 + ldrne r0,[rUart,#UART_RBR] + beq 1b //br on timeout + rsbs r1,r0,#L1(9) //reverse subtract + subcss r1,r0,#L1(0) + movcs pc,lr + + rsbs r1,r0,#L1(f) //reverse subtract + subcss r1,r0,#L1(a) + addcs r1,r1,#10 + + movcs pc,lr + + rsbs r1,r0,#L1(F) //reverse subtract + subcss r1,r0,#L1(A) + addcs r1,r1,#10 + mov pc,lr + + .if STACKS_VALID +//Must keep this aligned at 0x800 if Bal + mac_AfterPCPrint 0 + .endif + + +//r2:r1:r0 value to print, r9 - chksum +PrintHexEndian12: + .if 1 + orr r3,r0,r1 + orrs r3,r3,r2 + bne 1f + mov r3,lr + mov r0,#L1(0) + bl TransmitChkSum + mov r0,#L1(ASTERISK) + bl TransmitChkSum + mov r0,#29+24-1 + mov lr,r3 + b TransmitChkSum + .endif +1: +#if LITTLE_ENDIAN + mov r7,lr + mov r5,r1 + mov r6,r2 + bl PrintHexEndian //r0 + mov r0,r5 + bl PrintHexEndian //r1 + mov r0,r6 + mov lr,r7 + b PrintHexEndian //r2 + +#else + mov r7,lr + mov r5,r0 + mov r6,r1 + mov r0,r2 + bl PrintHexEndian //r2 + mov r0,r6 + bl PrintHexEndian //r1 + mov r0,r5 + mov lr,r7 + b PrintHexEndian //r0 +#endif + + +MainInitializationCode: + cmp pc,#MEM_START + biclo sp,pc,#FLASH_BASE_ADDRESS + rsblos sp,sp,#0x4000 + movlo r1,#0 + blo InitializeCont2 //br if not ram and not from reset vector + +//pc - 0-0x4000, 0x04000000-0x04004000, 0xa000000-0xffffffff + InitCS0_CS1 r0,sp + InitGPIO r0,sp + +#if (PLATFORM_TYPE==NEONB) + adr lr,AfterPCPrint + cmp lr,#0x800 + bne InitializeCont1 + BigOrr2 lr,FLASH_BASE_ADDRESS //if in low part of CS0 flash, try CS1 flash + BigMov r0,0xe3a00055 //instruction mov r0,#55 + ldr r2,[lr] + cmp r2,r0 + addeq pc,lr,#InitializeCont-AfterPCPrint //br if CS1 valid +#endif + b InitializeCont1 + +//OUT: r0,r2 value, r7 trashed +ReadHexEndian: + mov r3,lr + ReadHexE r2,r7 + mov r0,r2 + mov pc,r3 + + +//OUT: r2:r1:r0 value +ReadHexEndian12: + mov r3,lr + +#if LITTLE_ENDIAN + ReadHexE r4,r7 + ReadHexE r5,r7 + ReadHexE r2,r7 + mov r0,r4 + mov r1,r5 +#else + ReadHexE r2,r7 + ReadHexE r5,r7 + ReadHexE r4,r7 + mov r0,r4 + mov r1,r5 +#endif + mov pc,r3 + + + +ReadGDB: + mov r8,#0 + mov r9,#0 + mov rGdbNum3,#0 + mov rGdbChkSum,#0 +1: bl Receive + beq 1b //br on timeout + cmp r0,#L1(G) + beq gdb_G +// cmp r0,#L1(q) +// beq gdb_q + mov rGdbCmd,r0 //r5 - command being requested + add rGdbChkSum,rGdbChkSum,r0 //update checksum + bl GetNumber + mov r6,r2 + mov r7,r0 + cmp r0,#L1(POUND) + beq 2f + cmp rGdbCmd,#L1(P) + beq gdb_P +// cmp r0,#L1(COMMA) +// cmpne r0,#L1(SEMICOLON) +// cmpne r0,#L1(COLON) +// cmpne r0,#L1(EQUAL) + bl GetNumber + mov r8,r2 + mov r9,r0 + cmp r0,#L1(POUND) + beq 2f + cmp rGdbCmd,#L1(M) + beq gdb_M + cmp rGdbCmd,#L1(X) + beq gdb_X + + bl GetNumber + mov rGdbNum3,r2 + cmp r0,#L1(POUND) + bne WaitForPound + +//# found, check chksum +2: bl ReadChksum + and rGdbChkSum,rGdbChkSum,#0xff + cmp rGdbChkSum,r2 + bne CheckSumError + mov r0,#L1(PLUS) + bl Transmit + + cmp rGdbCmd,#L1(g) + beq gdb_g + cmp rGdbCmd,#L1(p) + beq gdb_p + cmp rGdbCmd,#L1(m) + beq gdb_m + cmp rGdbCmd,#L1(c) + beq gdb_c + cmp rGdbCmd,#L1(C) + beq gdb_C + cmp rGdbCmd,#L1(s) + beq gdb_s + cmp rGdbCmd,#L1(S) + beq gdb_S + cmp rGdbCmd,#L1(z) + beq gdb_z + cmp rGdbCmd,#L1(Z) + beq gdb_Z + cmp rGdbCmd,#L1(t) + beq gdb_t + cmp rGdbCmd,#L1(QUESTION_MARK) + beq gdb_lastSignal + cmp rGdbCmd,#L1(D) + beq gdb_D +//this is an unimplemented command +UnImplemented: + BigMov r0,L4(DOLLAR,POUND,0,0) + bl Transmit1 + b WaitForDollarSign + + +SendError01: + mov r9,#0 //chksum + mov r0,#L1(DOLLAR) + bl Transmit + mov r0,#L1(E) + bl TransmitChkSum + mov r0,#L1(0) + bl TransmitChkSum + mov r0,#L1(1) + bl TransmitChkSum + sub r5,pc,#.+8-SendError01 + b FinishPacket + + +SendOK: + mov r9,#0 //chksum + mov r0,#L1(DOLLAR) + bl Transmit + mov r0,#L1(O) + bl TransmitChkSum + mov r0,#L1(K) + bl TransmitChkSum + sub r5,pc,#.+8-SendOK + b FinishPacket + +CheckSumError: + mov r0,#L1(MINUS) + bl Transmit +WaitForDollarSign: +11: bl GetNumber //$ will branch to ReadGDB + b 11b +WaitForPound: +11: bl GetNumber + cmp r0,#L1(POUND) + bne 11b + bl ReadChksum + and rGdbChkSum,rGdbChkSum,#0xff + cmp rGdbChkSum,r2 + bne CheckSumError + mov r0,#L1(PLUS) + bl Transmit + b UnImplemented + + + +FinishPacket: + mov r0,#L1(POUND) + bl Transmit + and r0,r9,#0xff + bl PrintHexByte +10: mov r2,#5 +11: bl ReadHex + cmp r0,#L1(DOLLAR) + beq ReadGDB + cmp r0,#L1(PLUS) + beq WaitForDollarSign + cmp r0,#L1(MINUS) + + + moveq pc,r5 //retransmit packet + cmp r0,#GDB_EXIT_CHAR + bne 10b + subs r2,r2,#1 + beq Prompt + b 11b + + .if 0 +gdb_q: + mov r2,#0 + mov r3,#0 +1: bl ReadHex + cmp r0,#L1(DOLLAR) + beq ReadGDB + cmp r0,#GDB_EXIT_CHAR + beq Prompt + cmp r0,#L1(POUND) + beq 2f + add rGdbChkSum,rGdbChkSum,r0 //update checksum + mov r1,r2,LSR #24 + orr r3,r1,r3,LSL #8 + orr r2,r0,r2,LSL #8 + b 1b +2: + bl ReadChksum + and rGdbChkSum,rGdbChkSum,#0xff + cmp rGdbChkSum,r2 + bne CheckSumError + mov r0,#L1(PLUS) + bl Transmit + b UnImplemented + .endif + + +//Detach command - gdb is exiting +gdb_D: +//clear break/watch points + b Prompt + +//r6 - addr, r8 - PP, rGdbNum3 - mm +gdb_t: + b UnImplemented + + +//read general registers +gdb_g: + mov r9,#0 //chksum + mov r0,#L1(DOLLAR) + bl Transmit + mov r8,#0 +1: mov r2,r8 + bl GetRegVal + bl PrintHexEndian + add r8,r8,#1 + cmp r8,#SYM_PC+1 + bne 1b + + mov r2,#SYM_FP0 + bl GetRegVal + mov r8,#0 +2: mov r2,#0 + bl PrintHexEndian12 //fp0-7 + mov r0,#0 + mov r1,#0 + add r8,r8,#1 + cmp r8,#8 + bne 2b + + bl PrintHexEndian //fps + + mov r2,#SYM_CPSR + bl GetRegVal + bl PrintHexEndian //cpsr + + sub r5,pc,#.+8-gdb_g + b FinishPacket + + +//Read general register +//r6 - reg # +gdb_p: + mov r9,#0 //chksum + mov r0,#L1(DOLLAR) + bl Transmit + mov r2,r6 + cmp r6,#SYM_PC+1 + bcs 2f + +1: bl GetRegVal +3: bl PrintHexEndian +4: sub r5,pc,#.+8-gdb_p + b FinishPacket +2: cmp r6,#25 + mov r2,#SYM_CPSR + beq 1b + cmp r6,#24 //fps + mov r0,#0 + beq 3b + cmp r6,#16 //fp0 + mov r0,#0 + mov r1,#0 + mov r2,#SYM_FP0 + mov rGdbNum3,r6 + bleq GetRegVal + mov r2,#0 + bl PrintHexEndian12 //fp0-7 + mov r6,rGdbNum3 + b 4b + +//read memory +//r6 - addr, r8 - length +gdb_m: + mov r9,#0 //chksum + mov r0,#L1(DOLLAR) + bl Transmit + mov r5,r6 + movs r7,r8 + beq 4f +1: + tst r5,#3 + bne 3f + cmp r7,#4 + bcc 3f + ldr r0,[r5],#4 + bl PrintHexEndian + subs r7,r7,#4 + bne 1b + b 4f + +3: ldrb r0,[r5],#1 + bl PrintHexByteEndian + subs r7,r7,#1 + bne 1b +4: sub r5,pc,#.+8-gdb_m + b FinishPacket + + +//continue +//r6 - address, 0- current PC +gdb_c: + mov r8,r6 +//r8 - address, 0- current PC +gdb_C: + movs rNum1,r8 + movne rValidCnt,#F_NUM1_MASK + moveq rValidCnt,#0 + tst rNum1,#3 + bne SendError01 + mov r4,#1 + b Go_Cmd1 + +//step +//r6 - address, 0- current PC +gdb_s: + mov r8,r6 +//r8 - address, 0- current PC +gdb_S: + movs rNum1,r8 + movne rValidCnt,#F_NUM1_MASK + moveq rValidCnt,#0 + tst rNum1,#3 + bne SendError01 + mov r4,#1 + b Trace_Cmd1 + + + +//watchpoints/breakpoints - remove +//r6 - type, r8 - address +gdb_z: + cmp r6,#0 //software breakpoint + cmpne r6,#1 //hardware breakpoint + bne UnImplemented +// mov rNum1,r8 //same reg + bl BC_Do + b SendOK + + + +//watchpoints/breakpoints - insert +gdb_Z: + cmp r6,#0 //software breakpoint + cmpne r6,#1 //hardware breakpoint + bne UnImplemented +// mov rNum1,r8 //same reg + bl BS_Do // z-0 if r0==rNum1, breakpoint was already set + cmpne r0,rNum1 + beq SendOK + b SendError01 + + +//gdb routines below have not done checksum yet +//write general registers +gdb_G: + mov r8,#0 +1: bl ReadHexEndian + mov r2,r8 + mov r1,#0 + bl StoreRegVal //r2 - symbol #, r1:r0 - value + add r8,r8,#1 + cmp r8,#SYM_PC+1 + bne 1b + + bl ReadHexEndian12 + mov r2,#SYM_FP0 + bl StoreRegVal //r2 - symbol #, r1:r0 - value + + mov r8,#1 +2: bl ReadHexEndian12 + add r8,r8,#1 + cmp r8,#8 + bne 2b + + bl ReadHexEndian //fps + bl ReadHexEndian //cpsr + + mov r2,#SYM_CPSR + bl StoreRegVal //r2 - symbol #, r1:r0 - value +FinishWritePacket: + bl FinishWriteP + b SendOK +FinishWriteP: + mov r4,lr + bl ReadHex + cmp r0,#L1(POUND) + bne CheckSumError + bl ReadChksum + and rGdbChkSum,rGdbChkSum,#0xff + cmp rGdbChkSum,r2 + bne CheckSumError + mov r0,#L1(PLUS) + bl Transmit + mov pc,r4 + + + + +//write general register +//r6 - reg# +gdb_P: + mov r8,r6 + cmp r6,#SYM_PC+1 + bcs 2f +1: + bl ReadHexEndian +4: mov r6,r0 + mov r7,r1 + bl FinishWriteP + mov r0,r6 + mov r1,r7 + mov r2,r8 + bl StoreRegVal //r2 - symbol #, r1:r0 - value + b SendOK + +3: bl ReadHexEndian + b FinishWritePacket + +2: cmp r6,#25 + mov r8,#SYM_CPSR + beq 1b + cmp r6,#24 //fps + beq 3b + bl ReadHexEndian12 + cmp r6,#16 //fp0 + bne FinishWritePacket + mov r8,#SYM_FP0 + b 4b + + +//write memory +//r6 - addr, r8 - length +gdb_M: + movs r8,r8 + beq FinishWritePacket + +1: tst r6,#3 + beq 3f +2: bl ReadHexByteEndian + strb r2,[r6],#1 + subs r8,r8,#1 + bne 1b + b FinishWritePacket +3: cmp r8,#4 + bcc 2b + bl ReadHexEndian + str r2,[r6],#4 + subs r8,r8,#4 + bne 3b + b FinishWritePacket + + +//write memory binary with 0x7d, "$","#", escaped with 0x7d +//r6 - addr, r8 - length +gdb_X: + movs r8,r8 + beq FinishWritePacket + +1: tst r6,#3 + beq 3f +2: bl ReadByteEndian + strb r0,[r6],#1 + subs r8,r8,#1 + bne 1b + b FinishWritePacket +3: cmp r8,#4 + bcc 2b + bl ReadEndian + str r0,[r6],#4 + subs r8,r8,#4 + bne 3b + b FinishWritePacket + + + +ReadEndian: + mov r4,lr + mov r5,#4 +1: bl ReadByteEndian + +#if LITTLE_ENDIAN + mov r0,r0,LSL #24 + orr r2,r0,r2,LSR #8 +#else + orr r2,r0,r2,LSL #8 +#endif + + subs r5,r5,#1 + bne 1b + mov r0,r2 + mov pc,r4 + + +ReadByteEndian: + mov r3,lr + bl ReadHex + add rGdbChkSum,rGdbChkSum,r0 //update checksum + cmp r0,#0x7d + beq 1f + cmp r0,#L1(DOLLAR) + cmpne r0,#L1(POUND) + beq CheckSumError + mov pc,r3 +1: + bl ReadHex + add rGdbChkSum,rGdbChkSum,r0 //update checksum + mov pc,r3 + + +ReadHexByteEndian: + mov r3,lr + bl ReadHex + bcc CheckSumError + add rGdbChkSum,rGdbChkSum,r0 //update checksum + mov r2,r1 + bl ReadHex + bcc CheckSumError + add rGdbChkSum,rGdbChkSum,r0 //update checksum + add r2,r1,r2,LSL #4 + mov pc,r3 + +//OUT: r2 - checksum +ReadChksum: + mov r3,lr + bl ReadHex + movcs r2,r1 + blcs ReadHex + addcs r2,r1,r2,LSL #4 + mvncc r2,#0 + mov pc,r3 + +//out: r0 exit character, r2 - number, rGdbChkSum - updated +GetNumber: + mov r2,#0 + mov r3,lr +1: bl ReadHex + bcc 3f + add rGdbChkSum,rGdbChkSum,r0 //update checksum +2: tst r2,#0xf0000000 + movne pc,r3 //return on number overflow + add r2,r1,r2,LSL #4 + b 1b +3: cmp r0,#L1(DOLLAR) + beq ReadGDB + cmp r0,#GDB_EXIT_CHAR + beq Prompt + cmp r0,#L1(POUND) + addne rGdbChkSum,rGdbChkSum,r0 //update checksum + mov pc,r3 + +// ***************************************************************** +#if (PLATFORM_TYPE==NEONB) +AfterPCPrint_error: + bl TransmitCRLF + BigMov r0,L4(F,l,a,s) + bl Transmit1 + BigMov r0,L4(h,SPACE,i,s) + bl Transmit1 + BigMov r0,L4(SPACE,i,n,v) + bl Transmit1 + BigMov r0,L4(a,l,i,d) + bl Transmit1 + bl TransmitCRLF +#endif +AfterPCPrint1: + mov rPrevNum1,#MEM_START + movs rNum1,rNum1 + tsteq r6,#7 //make sure it's a SIG_RESET, or SIG_DBG_RESET, and timeout + bne 1f + BigBic r0,pc,FLASH_BASE_ADDRESS + cmp r0,#0x4000 + blo Gl_Cmd //auto start program if running in flash +1: + b R_Cmd +// b Prompt2 + + +Invalid: + bl TransmitCRLF + BigMov r0,L4(i,n,v,a) + bl Transmit1 + BigMov r0,L3(l,i,d) + bl Transmit1 + b Prompt +Prompt1: + mov rPrevNum1,#MEM_START +Prompt: +1: bl TransmitCRLF +Prompt2: + mov r0,#L1(PERIOD) + bl Transmit + bl TransmitSPACE + mov rFieldStart,#1 + bl ReadCommand + + mov r2,r0 //save exit character + cmp r0,#0x0d + blne Transmit + bl TransmitCRLF + + cmp rCommand,#0 + bne 2f + cmp r2,#0x0d + beq 1b + cmp r2,#L1(PLUS) + addeq rPrevNum1,rPrevNum1,#4 + beq Examine_Cmd + cmp r2,#L1(MINUS) + subeq rPrevNum1,rPrevNum1,#4 + beq Examine_Cmd + b 1b + +2: tst rSymbol,#F_NUM1_MASK + mov r0,rNum1 + blne GetSymbolNumber + bne Invalid + mov rNum1,r0 + + tst rSymbol,#F_NUM2_MASK + mov r0,rNum2 + blne GetSymbolNumber + bne Invalid + mov rNum2,r0 + + cmp rCommand,#L1(E) + beq Examine_Cmd + cmp rCommand,#L1(D) + beq Deposit_Cmd + cmp rCommand,#L1(G) + beq Go_Cmd + cmp rCommand,#L1(R) + beq R_Cmd + cmp rCommand,#L1(T) + beq Trace_Cmd + BigMov r0,C2(D,L) + cmp rCommand,r0 + beq Download_Cmd + cmp rCommand,#L1(QUESTION_MARK) + beq Help_Cmd + + mov r0,r0,LSL #8 + orr r0,r0,#L1(W) + cmp rCommand,r0 + beq Download_Wireless_Cmd + + BigMov r0,C4(S,S,I,D) + cmp rCommand,r0 + beq SSID_Cmd + + BigMov r0,C3(M,A,C) + cmp rCommand,r0 + beq MAC_Cmd + + BigMov r0,C4(B,U,R,N) + cmp rCommand,r0 + beq Burn_Cmd + + BigMov r0,C2(B,B) + cmp rCommand,r0 + beq Burn2_Cmd + + BigMov r0,C4(B,A,L,L) //Burn all of flash, erase end. + cmp rCommand,r0 + beq BurnAll_Cmd + + cmp rCommand,#L1(V) + beq Verify_Cmd + + BigMov r0,C2(V,V) + cmp rCommand,r0 + beq Verify2_Cmd + + BigMov r0,C2(G,L) + cmp rCommand,r0 + beq Gl_Cmd //go linux!! + + BigEor2 r0,C2(G,L)^C2(G,G) + cmp rCommand,r0 + beq GG_Cmd //go without cache invalidate + + BigMov r0,C2(T,T) + cmp rCommand,r0 + beq TT_Cmd //Trace without cache invalidate + + BigMov r0,C2(B,S) + cmp rCommand,r0 + beq BS_Cmd + + BigEor2 r0,C2(B,S)^C2(B,E) + cmp rCommand,r0 + beq BE_Cmd + + BigEor2 r0,C2(B,E)^C2(B,C) + cmp rCommand,r0 + beq BC_Cmd + + BigEor2 r0,C2(B,C)^C2(W,C) + cmp rCommand,r0 + beq WC_Cmd + + BigEor2 r0,C2(W,C)^C2(W,W) + cmp rCommand,r0 + beq WW_Cmd + + BigEor2 r0,C2(W,W)^C2(W,R) + cmp rCommand,r0 + beq WR_Cmd + + mov r0,r0,LSL #8 + orr r0,r0,#L1(W) + cmp rCommand,r0 + beq WRW_Cmd + + BigMov r0,C3(M,M,U) + cmp rCommand,r0 + beq MMU_Cmd +// mov r0,rCommand +// bl PrintHex + b Invalid + +//IN: rFieldStart - starting field (this is a blank counting field) +//OUT: +ReadCommand: + mov r3,lr + mov rSymbol,#0 + mov rField,rFieldStart + mov rValidCnt,#0 //low nibble: # of blanks before command + //next: # of chars in command + //next: # of blanks + //next: # of hex digits in num1 + //next: # of blanks + //next: # of hex digits in num2 + mov rCommand,#0 //command + mov rNum1,#0 //1st number + mov rNum2,#0 //2nd number + +1: bl Receive + beq 1b //br on timeout + cmp r0,#L1(DOLLAR) + beq ReadGDB + cmp r0,#L1(PLUS) + cmpne r0,#L1(MINUS) + cmpne r0,#L1(AT_SIGN) + cmpeq rValidCnt,#0 + cmpne r0,#0x0d + moveq pc,r3 //return on -,+, 1st on line or + + cmp r0,#L1(SPACE) + bne 2f + bl Transmit + tst rValidCnt,#0x80000000 + eorne rValidCnt,rValidCnt,#0x80000000 //clear bit 31 to mark as blank field + movne rField,rField,LSL #F_INC +//now we are in a counting blanks field + rsb r2,rField,rField,LSL #F_INC //get a field mask + and r1,rValidCnt,r2 + cmp r1,r2 + beq Invalid //br if field is full + add rValidCnt,rValidCnt,rField + b 1b +2: + cmp r0,#0x08 //Backspace + cmpne r0,#0x7f //del or Backspace + bne 4f + cmp rValidCnt,#0 + beq 1b //br if nothing to remove + BigMov r0,L3(BACKSPACE,SPACE,BACKSPACE) + bl Transmit1 + sub rValidCnt,rValidCnt,rField + mov r0,#4 + tst rSymbol,rField + movne r0,#8 + cmp rField,#F_COMMAND + moveq rCommand,rCommand,LSR #8 + cmp rField,#F_NUM1 + moveq rNum1,rNum1,LSR r0 + cmp rField,#F_NUM2 + moveq rNum2,rNum2,LSR r0 + +3: rsb r0,rField,rField,LSL #F_INC //get a field mask + tst rValidCnt,r0 + bne 1b //br if still more in this field + bic rSymbol,rSymbol,rField + cmp rField,rFieldStart + beq 1b +//move back to lower field + mov rField,rField,LSR #F_INC + eors rValidCnt,rValidCnt,#0x80000000 + b 3b + +4: bl Transmit + tst rValidCnt,#0x80000000 + orreq rValidCnt,rValidCnt,#0x80000000 //set bit 31 to mark as data field + moveq rField,rField,LSL #F_INC + cmp rField,#F_UNDEF + beq Invalid +//now we are in a data field + rsbs r1,rField,#F_COMMAND + rsbges r1,r0,#L1(9) //reverse subtract + subges r1,r0,#L1(0) + movge rField,rField,LSL #F_INC+F_INC //advance to number field if in range "0"-"9" + + rsb r2,rField,rField,LSL #F_INC //get a field mask + and r1,rValidCnt,r2 + cmp r1,r2 + beq Invalid //field is full + add rValidCnt,rValidCnt,rField + + rsbs r1,r0,#L1(z) //reverse subtract + subges r1,r0,#L1(a) + andge r0,r0,#0xdf //convert to uppercase if was "a"-"z" + cmp rField,#F_COMMAND + bne 6f + tst rCommand,#0xff000000 + bne Invalid + add rCommand,r0,rCommand,LSL #8 + b 1b + +6: tst rSymbol,rField + bne 15f + rsbs r1,r0,#L1(9) //reverse subtract + subges r1,r0,#L1(0) + bge 5f + rsbs r1,r0,#L1(F) //reverse subtract + subges r1,r0,#L1(A) + add r1,r1,#10 + bge 5f + orr rSymbol,rSymbol,rField +//now if number started with "A"-"F", convert back to ascii + + cmp rField,#F_NUM1 + mov r1,rValidCnt,LSR #F_NUM1_BIT //# of nibbles +1 in rNum + movne r1,rValidCnt,LSR #F_NUM2_BIT + and r1,r1,#((1< instruction -eq + andeq r3,r2,#0xf +#if DBG_R0 + addeq r0,rDBG,#DBG_R0 + ldreq r0,[r0,r3,LSL #2] +#else + ldreq r0,[rDBG,r3,LSL #2] +#endif + + biceq r0,r0,#1 + mov pc,r4 + + +51: tst r2,#1<<4 + bne 52f + add r0,r0,#4 //pc+8 + bl RegShiftImmed + b 50f +52: + tst r2,#1<<7 + movne pc,r4 //return if LDR|STR|MUL|MLA... +//this is a shift by a register value + add r0,r0,#4 //pc+8 + bl RegShiftReg + b 50f + +//nnnn 001n immediate +11: + movne pc,r4 + and r3,r2,#0x01800000 + cmp r3, #0x01000000 + moveq pc,r4 //return if TST|TEQ|CMP|CMN|MRS|MSR|SMLA..... + and r6,r1,#0xff + mov r3,r1,LSR #7 + BIC r3,r3,#1 + mov r1,r6,ROR r3 + add r0,r0,#4 //pc+8 +//r1 has 2nd operand +50: + mov r3,r2,LSR #16 + and r3,r3,#0xf + cmp r3,#0xf + moveq r6,r0 //pc+8 +#if DBG_R0 + addne r6,rDBG,#DBG_R0 + ldrne r6,[r6,r3,LSL #2] // - r6 +#else + ldrne r6,[rDBG,r3,LSL #2] // - r6 +#endif + +//r6 has 1st operand + mov r3,r2,LSR #21 + and r3,r3,#0xf + msr CPSR_f,r7 + add pc,pc,r3,LSL #3 + nop + and r0,r6,r1 //0-AND + mov pc,r4 + eor r0,r6,r1 //1-EOR + mov pc,r4 + sub r0,r6,r1 //2-SUB + mov pc,r4 + rsb r0,r6,r1 //3-RSB + mov pc,r4 + add r0,r6,r1 //4-ADD + mov pc,r4 + adc r0,r6,r1 //5-ADC + mov pc,r4 + sbc r0,r6,r1 //6-SBC + mov pc,r4 + rsc r0,r6,r1 //7-RSC + mov pc,r4 + sub r0,r0,#4 //8-TST, cannot get here + mov pc,r4 + sub r0,r0,#4 //9-TEQ, cannot get here + mov pc,r4 + sub r0,r0,#4 //A-CMP, cannot get here + mov pc,r4 + sub r0,r0,#4 //B-CMN, cannot get here + mov pc,r4 + orr r0,r6,r1 //C-ORR + mov pc,r4 + mov r0,r1 //D-MOV + mov pc,r4 + bic r0,r6,r1 //E-BIC + mov pc,r4 + mvn r0,r1 //F-MVN + mov pc,r4 + +//LDR +12: +13: + tsteq r2,#1<<22 //B bit 22 1 : Byte, 0: Word + movne pc,r4 + tst r2,#1<<20 //L bit 20 1 : LDR, 0:STR + moveq pc,r4 + + add r0,r0,#4 //pc+8 + tst r2,#1<<24 //P bit + moveq r1,#0 + beq 34f + tst r2,#1<<25 + beq 34f //branch if immediate12bits value is in r1 + bl RegShiftImmed +34: + mov r3,r2,LSR #16 + and r3,r3,#0xf + cmp r3,#0xf + moveq r6,r0 //pc+8 +#if DBG_R0 + addne r6,rDBG,#DBG_R0 + ldrne r6,[r6,r3,LSL #2] // - r6 +#else + ldrne r6,[rDBG,r3,LSL #2] // - r6 +#endif + + tst r2,#1<<23 //U bit Up/Down, Add/Sub + addne r6,r6,r1 + subeq r6,r6,r1 + ldr r0,[r6] + mov pc,r4 + + +//LDM +14: + and r3,r2,#(1<<15)+(1<<20) + cmp r3, #(1<<15)+(1<<20) + movne pc,r4 + +//LDM to PC -eq + add r0,r0,#4 //pc+8 + mov r3,r2,LSR #16 + and r3,r3,#0xf + cmp r3,#0xf + moveq r1,r0 //pc+8, should never execute +#if DBG_R0 + addne r1,rDBG,#DBG_R0 + ldrne r1,[r1,r3,LSL #2] // - r1 +#else + ldrne r1,[rDBG,r3,LSL #2] // - r1 +#endif + +//r1 is already correct address for downward from base (U==0), included(P==0) + tst r2,#1<<23 //U bit + beq 4f + mov r6,r2,LSL #16 +3: movs r6,r6,LSL #1 + addcs r1,r1,#4 + bne 3b + eor r2,r2,#1<<24 +4: tst r2,#1<<24 //P bit + subne r1,r1,#4 + ldr r0,[r1] + mov pc,r4 + +//B{L} instruction +15: + mov r3,r2,LSL #8 + add r0,r0,#4 + add r0,r0,r3,ASR #6 + mov pc,r4 + +//IN: r0 - pc+4, r2 instruction, r1 low 12 bits of instruction +//OUT: r1 - shifted value, r2 - unchanged, r0 - pc+8 +RegShiftImmed: + mov r1,r1,LSR #7 //Shift_imm - r1 + and r3,r2,#0xf + cmp r3,#0xf + moveq r6,r0 //pc+8 +#if DBG_R0 + addne r6,rDBG,#DBG_R0 + ldrne r6,[r6,r3,LSL #2] // - r6 +#else + ldrne r6,[rDBG,r3,LSL #2] // - r6 +#endif + + tst r2,#1<<6 + bne 32f + tst r2,#1<<5 + bne 31f + mov r1,r6,LSL r1 // shf Shift_imm - r1 + mov pc,lr + +31: cmp r1,#0 + movne r1,r6,LSR r1 + mov pc,lr + +32: tst r2,#1<<5 + bne 33f + cmp r1,#0 + moveq r1,#32 + mov r1,r6,ASR r1 + mov pc,lr + +33: cmp r1,#0 + movne r1,r6,ROR r1 + movne pc,lr + + msr CPSR_f,r7 + mov r1,r6, RRX + mov pc,lr + + +//IN: r2 instruction, r1 low 12 bits of instruction +//OUT: r1 - shifted value, r2 - unchanged, r0 - pc+8 +RegShiftReg: + mov r3,r1,LSR #8 + cmp r3,#0xf + moveq r1,r0 //pc+8 +#if DBG_R0 + addne r1,rDBG,#DBG_R0 + ldrne r1,[r1,r3,LSL #2] // - r1 +#else + ldrne r1,[rDBG,r3,LSL #2] // - r1 +#endif + + and r3,r2,#0xf + cmp r3,#0xf + moveq r6,r0 //pc+8 +#if DBG_R0 + addne r6,rDBG,#DBG_R0 + ldrne r6,[r6,r3,LSL #2] // - r6 +#else + ldrne r6,[rDBG,r3,LSL #2] // - r6 +#endif + tst r2,#1<<6 + bne 32f + tst r2,#1<<5 + moveq r1,r6,LSL r1 // shf - r1 + movne r1,r6,LSR r1 + mov pc,lr + +32: tst r2,#1<<5 + moveq r1,r6,ASR r1 + movne r1,r6,ROR r1 + mov pc,lr + + + +//IN: r0 - register name +//OUT: r0 - location +GetSymbolNumber: + BigMov r1,C2(R,0) + sub r2,r0,r1 + cmp r2,#10 + bcc 1f + + BigMov r1,C3(R,1,0) + sub r2,r0,r1 + cmp r2,#6 + bcc 2f + + BigMov r1,C3(F,P,0) + cmp r1,r0 + moveq r2,#SYM_FP0 + beq 1f + + BigMov r1,C2(S,L) + cmp r1,r0 + moveq r2,#SYM_SL + beq 1f + + BigMov r1,C2(F,P) + cmp r1,r0 + moveq r2,#SYM_FP + beq 1f + + BigEor2 r1,C2(F,P)^C2(I,P) + cmp r1,r0 + moveq r2,#SYM_IP + beq 1f + + BigEor2 r1,C2(I,P)^C2(S,P) + cmp r1,r0 + moveq r2,#SYM_SP + beq 1f + + BigMov r1,C2(L,R) + cmp r1,r0 + moveq r2,#SYM_LR + beq 1f + + BigMov r1,C2(P,C) + cmp r1,r0 + moveq r2,#SYM_PC + beq 1f + + BigMov r1,C4(C,P,S,R) + cmp r1,r0 + moveq r2,#SYM_CPSR + beq 1f + + BigMov r1,C3(F,S,R) + cmp r1,r0 + moveq r2,#SYM_FSR + beq 1f + + BigMov r1,C3(F,A,R) + cmp r1,r0 + moveq r2,#SYM_FAR + beq 1f + + BigMov r1,C4(D,C,S,R) + cmp r1,r0 + moveq r2,#SYM_DCSR + beq 1f + + BigMov r1,C4(T,T,B,R) + cmp r1,r0 + moveq r2,#SYM_TTBR + beq 1f + + BigMov r1,C4(C,T,R,L) + cmp r1,r0 + moveq r2,#SYM_CTRL + beq 1f + +// BigMov r1,C3(F,P,S) +// cmp r1,r0 +// moveq r2,#SYM_FPS-SYM_F0 + movne pc,lr + + +//3: add r2,r2,#SYM_F0-SYM_SL +2: add r2,r2,#SYM_SL +1: BigMov r0,DEBUG_SYM + add r0,r0,r2 + subs r2,r2,r2 + mov pc,lr + + + +//IN: r0 - symbol address or number to print +PrintHexOrSymbol: + BigAdd r1,r0,-DEBUG_SYM + cmp r1,#SYM_LAST+1 + bcs PrintHex + mov r0,#0 + +//IN: r1 register #, r0 {31:16}- 2 characters to print after +PrintRegName: + cmp r1,#SYM_SL + bcs 1f + add r0,r0,r1,LSL #8 + add r0,r0,#L2(NULL,0) +// cmp r1,#10 +// subge r0,r0,#10<<8 +// movge r0,r0,LSL #8 +// addge r0,r0,#L2(NULL,1) + add r0,r0,#L1(R) +20: b Transmit1 +1: BigOrr2Eq r0,L2(S,L) + cmp r1,#SYM_FP + BigOrr2Eq r0,L2(F,P) + cmp r1,#SYM_IP + BigOrr2Eq r0,L2(I,P) + cmp r1,#SYM_SP + BigOrr2Eq r0,L2(S,P) + cmp r1,#SYM_LR + BigOrr2Eq r0,L2(L,R) + cmp r1,#SYM_PC + BigOrr2Eq r0,L2(P,C) + ble 20b + cmp r1,#SYM_FP0 + + mov r0,r0,LSL #8 + BigOrr2Eq r0,L3(F,P,0) + cmp r1,#SYM_FSR + BigOrr2Eq r0,L3(F,S,R) + cmp r1,#SYM_FAR + BigOrr2Eq r0,L3(F,A,R) + + cmp r1,#SYM_CPSR + BigMovEq r0,L4(C,P,S,R) + cmp r1,#SYM_DCSR + BigMovEq r0,L4(D,C,S,R) + cmp r1,#SYM_TTBR + BigMovEq r0,L4(T,T,B,R) + cmp r1,#SYM_CTRL + BigMovEq r0,L4(C,T,R,L) + b Transmit1 + + +//r2 - symbol # +PrintRegVal: + mov r6,lr + bl GetRegVal + cmp r2,#SYM_FP0 + bne 1f + mov r5,r0 + mov r0,r1 + bl PrintHexByte //40 bits + mov r0,r5 +1: mov lr,r6 + b PrintHex + + + + + +//r2 - symbol #, r1:r0 - value +StoreRegVal: + cmp r2,#SYM_FP0 + bcs 1f +#if DBG_R0 + add r1,rDBG,#DBG_R0 + str r0,[r1,r2,LSL #2] +#else + str r0,[rDBG,r2,LSL #2] +#endif + mov pc,lr +1: + bne 2f +//MAR{} acc0,, + mar acc0,r0,r1 + mov pc,lr +2: cmp r2,#SYM_FSR + CP15_FSR mcreq,r0 + cmp r2,#SYM_FAR + CP15_FAR mcreq,r0 + cmp r2,#SYM_DCSR + CP14_DCSR mcreq,r0 + cmp r2,#SYM_TTBR + CP15_TTBR mcreq,r0 + cmp r2,#SYM_CTRL + CP15_CONTROL mcreq,r0 + mov pc,lr + +R_Cmd: + mov r7,#0 +1: mov r1,r7 + BigMov r0,L4(NULL,NULL,COLON,SPACE) + bl PrintRegName + bl TransmitSPACE + mov r2,r7 + bl PrintRegVal + bl TransmitSPACE + bl TransmitSPACE + add r7,r7,#1 + tst r7,#3 + bleq TransmitCRLF + cmp r7,#SYM_LAST_RCMD+1 + bne 1b + b Prompt +BS_Cmd: + tst rValidCnt,#F_NUM1_MASK + beq BE_Cmd + tst rSymbol,#F_NUM1_MASK + mov r0,rNum1 + blne GetSymValue + mov rNum1,r0 + bl BS_Do + beq Prompt + b BE_Cmd + +//out: z-1 breakpoint just set +// z-0 if r0==rNum1, breakpoint was already set +BS_Do: + CP15_IBCR0 mrc,r0 + CP15_IBCR1 mrc,r1 + orr rNum1,rNum1,#1 + cmp r0,rNum1 + cmpne r1,rNum1 + beq 2f + tst r0,#1 + CP15_IBCR0 mcreq,rNum1 + moveq pc,lr + tst r1,#1 + CP15_IBCR1 mcreq,rNum1 + mov pc,lr + +2: mov r0,rNum1 + movs r1,#1 + mov pc,lr + +BC_Cmd: + tst rValidCnt,#F_NUM1_MASK + beq BE_Cmd + tst rSymbol,#F_NUM1_MASK + mov r0,rNum1 + blne GetSymValue + mov rNum1,r0 + bl BC_Do + beq Prompt + b BE_Cmd + +//out: z-1 breakpoint just cleared +BC_Do: + CP15_IBCR0 mrc,r0 + CP15_IBCR1 mrc,r1 + orr rNum1,rNum1,#1 + mov r2,#0 + cmp r0,rNum1 + CP15_IBCR0 mcreq,r2 + cmp r1,rNum1 + CP15_IBCR1 mcreq,r2 + cmpne r0,rNum1 + mov pc,lr + +BE_Cmd: + BigMov r0,L4(B,K,P,T) + bl Transmit1 + bl TransmitSPACE + BigMov r0,L4(S,t,a,t) + bl Transmit1 + BigMov r0,L4(u,s,COLON,SPACE) + bl Transmit1 + CP15_IBCR0 mrc,r0 + tst r0,#1 + bic r0,r0,#1 + blne PrintHex + bl TransmitSPACE + + CP15_IBCR1 mrc,r0 + tst r0,#1 + bic r0,r0,#1 + blne PrintHex + b Prompt + +WatchStatus: + BigMov r0,L4(W,A,T,C) + bl Transmit1 + BigMov r0,L2(H,SPACE) + bl Transmit1 + BigMov r0,L4(S,t,a,t) + bl Transmit1 + BigMov r0,L4(u,s,COLON,SPACE) + bl Transmit1 + CP15_DBCON mrc,r5 + tst r5,#0x0f + beq 10f + tst r5,#0x03 + bne 1f + tst r5,#0x100 + bne 10f //br if dbr1 is mask (nothing being watched) + b 4f +1: + CP15_DBR0 mrc,r0 + bl PrintHex + bl 20f + tst r5,#0x100 + beq 3f + BigMov r0,L2(M,COLON) + bl Transmit1 + CP15_DBR1 mrc,r0 //read mask + bl PrintHex + b 10f +3: + tst r5,#3<<2 + beq 10f +4: + CP15_DBR1 mrc,r0 + bl PrintHex + mov r5,r5,LSR #2 + bl 20f +10: b Prompt + + +20: + BigMov r0,L4(SPACE,R,W,SPACE) + tst r5,#1 + beq 21f + tst r5,#2 + BigEor2Eq r0,L4(SPACE,R,W,SPACE)^L4(SPACE,SPACE,W,SPACE) //store only + BigEor2Ne r0,L4(SPACE,R,W,SPACE)^L4(SPACE,R,SPACE,SPACE) //load only +21: + b Transmit1 + +WC_Cmd: + mov r0,#0 + CP15_DBCON mcr,r0 + b Prompt +WRW_Cmd: + mov r4,#2 + b WW_JOIN +WR_Cmd: + mov r4,#3 + b WW_JOIN +WW_Cmd: + mov r4,#1 +WW_JOIN: + tst rValidCnt,#F_NUM1_MASK + beq WatchStatus + tst rSymbol,#F_NUM1_MASK + mov r0,rNum1 + blne GetSymValue + mov rNum1,r0 + + tst rValidCnt,#F_NUM2_MASK + beq 3f + tst rSymbol,#F_NUM2_MASK + mov r0,rNum2 + blne GetSymValue + mov rNum2,r0 + orr r4,r4,#0x100 //mask +1: + mov r0,#0 + CP15_DBCON mcr,r0 + CP15_DBR0 mcr,rNum1 + CP15_DBR1 mcr,rNum2 +2: + CP15_DBCON mcr,r4 + b Prompt +3: + CP15_DBCON mrc,r5 + mov rNum2,#0 + tst r5,#0x100 + bne 1b //br if mask was used previously + tst r5,#0x0f + beq 1b + mov r0,#0 + CP15_DBCON mcr,r0 + tst r5,#3 + orreq r4,r5,r4 + bicne r5,r5,#3<<2 + orrne r4,r5,r4,LSL #2 + CP15_DBR0 mcreq,rNum1 + CP15_DBR1 mcrne,rNum1 + b 2b + + +//IN: rNum2 address +//OUT: r1:r0 val +GetSymValue: + BigAdd r2,rNum2,-DEBUG_SYM + cmp r2,#SYM_LAST+1 + bcc GetRegVal + mov r0,rNum2 + mov r1,#0 + mov pc,lr +//IN: rPrevNum1 address or symbol +//OUT: r1:r0 val +GetValue: + BigAdd r2,rPrevNum1,-DEBUG_SYM + cmp r2,#SYM_LAST+1 + bcc GetRegVal + ldr r0,[rPrevNum1] + mov r1,#0 + mov pc,lr + + +//IN: rNum1 address +PrintLocationOrRegVal: + BigAdd r2,rNum1,-DEBUG_SYM + cmp r2,#SYM_LAST+1 + bcc PrintRegVal + tst r5,#3 + tsteq rNum1,#3 + bne 1f + ldr r0,[rNum1] + b PrintHex +1: ldrb r0,[rNum1] + b PrintHexByte + +//IN: rPrevNum1 address, r1:r0 - value +StoreLocationOrReg: + BigAdd r2,rPrevNum1,-DEBUG_SYM + cmp r2,#SYM_LAST+1 + bcc StoreRegVal + tst r5,#3 + tsteq rPrevNum1,#3 + bne 1f + str r0,[rPrevNum1] + mov pc,lr +1: strb r0,[rPrevNum1] + mov pc,lr + +GetChangeAmount: + BigAdd r0,rPrevNum1,-DEBUG_SYM + cmp r0,#SYM_LAST+1 + movcs r0,#4 + movcc r0,#1 + tst r5,#3 +// tsteq rPrevNum1,#3 + movne r0,#1 + mov pc,lr + +Examine_Cmd: + tst rValidCnt,#F_NUM1_MASK + moveq rNum1,rPrevNum1 + movne rPrevNum1,rNum1 + mov r5,rNum1 + tst rValidCnt,#F_NUM2_MASK + bne 12f +1: mov r0,rNum1 + bl PrintHexOrSymbol + mov r0,#L1(FSLASH) + bl Transmit + + bl PrintLocationOrRegVal + + bl TransmitSPACE + mov rFieldStart,#1<<(F_INC+F_INC+F_INC+F_INC) //blank before num2 field + str r5,[rDBG,#DBG_TEMP] + bl ReadCommand + ldr r5,[rDBG,#DBG_TEMP] + mov r3,r0 //save exit character + mov r0,rNum2 + mov r1,#0 + tst rSymbol,#F_NUM2_MASK + beq 20f + blne GetSymbolNumber + bne Invalid + mov rNum2,r0 + bl GetSymValue + +20: + cmp r3,#L1(PLUS) + cmpne r3,#L1(MINUS) + cmpne r3,#L1(AT_SIGN) + beq 2f + tst rValidCnt,#F_NUM2_MASK + beq Prompt + bl StoreLocationOrReg + mov r3,#L1(PLUS) + b 3f + +2: mov r0,r3 + bl Transmit +3: bl TransmitCRLF + bl GetChangeAmount + cmp r3,#L1(AT_SIGN) + beq 5f + cmp r3,#L1(PLUS) + addeq rPrevNum1,rPrevNum1,r0 + subne rPrevNum1,rPrevNum1,r0 +4: mov rNum1,rPrevNum1 + b 1b + +5: bl GetValue + mov rPrevNum1,r0 + mov r5,r0 + b 4b + +11: sub r0,rNum1,r5 + cmp r0,#0x1000 + bhs Prompt //no more than 128 lines per examine command + bl TransmitCRLF +12: mov r0,rNum1 + bl PrintHexOrSymbol + mov r0,#L1(FSLASH) + bl Transmit +13: + bl GetChangeAmount + bcc 14f + add r0,rNum1,#3 + cmp r0,rNum2 + bhi 16f + tst r5,#3 + tsteq rNum1,#3 + bne 16f +14: bl PrintLocationOrRegVal + bl GetChangeAmount +15: add rNum1,rNum1,r0 + cmp rNum1,rNum2 + bhi Prompt + tst rNum1,#0x1f + beq 11b + bl TransmitSPACE + tst rNum1,#0x0f + bleq TransmitSPACE + b 13b +16: + ldrb r0,[rNum1] + bl PrintHexByte + mov r0,#1 + b 15b + +Deposit_Cmd: + tst rValidCnt,#F_NUM1_MASK + beq Invalid + tst rValidCnt,#F_NUM2_MASK + beq Invalid + mov r0,rNum2 + mov r1,#0 + tst rSymbol,#F_NUM2_MASK + blne GetSymValue + mov rPrevNum1,rNum1 + bl StoreLocationOrReg + b Prompt + + +Download_Cmd: + tst rValidCnt,#F_NUM1_MASK + beq Invalid + tst rNum1,#3 + bne Invalid + cmp rNum1,#MEM_START + bcc Invalid //br if rNum1 is below ram start, + //NOTE: arm sets the carry to the opposite of most processors on subtract, compare + + mov rDest,rNum1 + mov rDestHead,rNum1 + mov rPrevNum1,rNum1 + mov rPrevCRC,#0 + mov rRunningCRC,#0 + mov rNak,#L1(C) //current NAK character + mov rBlockNum,#1 //block # to receive + +#if DDEBUG + b 47f +91: + cmp rBlockNum,#1 + beq 47f + mov r2,#L1(1) + b 45f +92: + mov r2,#L1(2) + b 45f +93: + mov r2,#L1(3) + b 45f +94: + mov r2,#L1(4) + b 45f +95: + mov r2,#L1(5) +45: + BigMov r0,L3(CAN,CAN,CAN) //abort + bl Transmit1 +46: bl Receive + bne 46b //branch until timeout + mov r0,r2 + bl Transmit + b Invalid +#else +91: +92: +93: +94: +95: +#endif + +47: + + mov r0,rNak +15: + bl Transmit +2: bl Receive + beq 91b //branch on timeout + + mov rPacketLength,#128-1 + cmp r0,#SOH + addne rPacketLength,rPacketLength,#1024-1-(128-1) + cmpne r0,#STX + beq 3f + cmp r0,#CAN + bne 16f + bl Receive + cmp r0,#CAN + bne 10f + b Invalid +16: cmp r0,#EOT + bne 10f + mov r0,#ACK + bl Transmit + +#if DDEBUG + mov rDestHead,rDest + mov r0,rDest + bl PrintHex + bl TransmitSPACE + mov r0,rBlockNum + bl PrintHex + + bl TransmitSPACE + mov r0,rRunningCRC + bl PrintHex + mov rDest,rDestHead +#endif + +// now verify that ram is STILL valid by recomputing the CRC + mov rCRC,#0 + mov r1,rPrevNum1 + b 83f +82: + ldrb r0,[r1],#1 +// + eor r0,rCRC,r0,LSL #24 + eor r0,r0,r0,LSR #4 //c is in high byte of r0 + and r0,r0,#0xff000000 + + mov rCRC,rCRC,LSL #8 + eor rCRC,rCRC,r0,LSL #4 + orr rCRC,rCRC,r0,LSR #8 + + eor rCRC,rCRC,r0,LSR #3 +// +83: cmp r1,rDest + bne 82b +#if DDEBUG + bl TransmitSPACE + mov r0,rCRC + bl PrintHex +#endif + + cmp rCRC,rRunningCRC + bne 84f + BigMov r0,L3(O,K,SPACE) + bl Transmit1 + mov r0,rPrevNum1 + mov rDestHead,rDest + bl PrintHex + mov r0,#L1(MINUS) + bl Transmit + mov r0,rDestHead + bl PrintHex + b Prompt +84: + BigMov r0,L4(E,R,R,O) + bl Transmit1 + mov r0,#L1(R) + bl Transmit + b Prompt + +3: bl Receive + beq 92b + mov r2,r0 + bl Receive + beq 93b + eor r0,r0,#0xff + cmp r0,r2 //check 1's complement blk # + bne 10f + cmp r2,rBlockNum //check blk # + bne 20f +80: + mov rDestHead,rDest //rDestHead - start of buffer, rDest end of buffer + mov rPrevCRC,rRunningCRC + mov rCRC,#0 //crc + +//alternative CRC calculation routines + .if 0 + BigMov r2,CRC_POLY +4: bl Receive + beq 8f //branch on timeout + eor rCRC,rCRC,r0,LSL #24 + mov r1,#8 +5: + movs rCRC,rCRC,LSL #1 + eorcs rCRC,rCRC,r2 + subs r1,r1,#1 + bne 5b + strb r0,[rDest],#1 + subs rPacketLength,rPacketLength,#1 + bge 4b + mov rCRC,rCRC,LSR #16 //CRC was only in the high half + + .endif + + + + .if 1 +4: bl Receive + beq 8f //branch on timeout +// +//calculate CRC +//unsigned int crc = 0; +//unsigned int c = 0; +//for (i=3; i> 4); +// c &= 0xff000000; +// crc = (((crc<<8) ^ (c << 4)) | (c>>8)) ^ (c >> 3); +//} +//crc >>= 16; +// + eor r1,rCRC,r0,LSL #24 + eor r1,r1,r1,LSR #4 + and r1,r1,#0xff000000 + + mov rCRC,rCRC,LSL #8 + eor rCRC,rCRC,r1,LSL #4 + orr rCRC,rCRC,r1,LSR #8 + eor rCRC,rCRC,r1,LSR #3 + +//also save a running total CRC to use to verify RAM after download is complete +// + eor r1,rRunningCRC,r0,LSL #24 + eor r1,r1,r1,LSR #4 //c is in high byte of r1 + and r1,r1,#0xff000000 + + mov rRunningCRC,rRunningCRC,LSL #8 + eor rRunningCRC,rRunningCRC,r1,LSL #4 + orr rRunningCRC,rRunningCRC,r1,LSR #8 + + eor rRunningCRC,rRunningCRC,r1,LSR #3 +// +#if LITTLE_ENDIAN + mov r0,r0,LSL #24 + orr r2,r0,r2,LSR #8 //this assumes a little endian memory system +#else + orr r2,r0,r2,LSL #8 //this assumes a big endian memory system +#endif + + tst rPacketLength,#3 + streq r2,[rDest],#4 + subs rPacketLength,rPacketLength,#1 + bge 4b + mov rCRC,rCRC,LSR #16 //CRC was only in the high half + .endif + + + + + bl Receive + beq 8f //branch on timeout + mov r2,r0 + bl Receive + beq 8f //branch on timeout + add r2,r0,r2,LSL #8 + cmp rCRC,r2 + bne 9f //branch on crc mismatch +//packet is good + add rBlockNum,rBlockNum,#1 + and rBlockNum,rBlockNum,#0xff + mov rNak,#NAK + mov r0,#ACK + b 15b +20: + sub r1,rBlockNum,#1 + and r1,r1,#0xff + cmp r1,r2 + bne 21f //br if not trying to transmit the packet I just ACKed + mov rDest,rDestHead //reset pointer to previous packet + mov rRunningCRC,rPrevCRC + mov rBlockNum,r1 //correct blk # + b 80b + +21: BigMov r0,L3(CAN,CAN,CAN) //abort code + bl Transmit1 +48: bl Receive + bne 48b //branch until timeout + +#if DDEBUG + mov r0,r2 + bl PrintHex + bl TransmitSPACE + mov r0,rBlockNum + bl PrintHex +#endif + + b Invalid //give up + + +8: mov rDest,rDestHead //reset register + mov rRunningCRC,rPrevCRC + b 94b //send NAK +9: +#if DDEBUG //debug code + BigMov r0,L3(CAN,CAN,CAN) //abort code + bl Transmit1 +44: bl Receive + bne 44b //branch until timeout + mov r0,r2 + bl PrintHex + bl TransmitSPACE + mov r0,rCRC + bl PrintHex + b Invalid +#endif + + mov rDest,rDestHead + mov rRunningCRC,rPrevCRC + + +10: bl Receive + bne 10b //branch until timeout + b 95b //send NAK and wait for packet + + + +// ******************************************************************************************* +// ******************************************************************************************* +// ******************************************************************************************* +// ******************************************************************************************* +//Code above this point must fit in 2k mini cache or be burned on flash +// +//Code below this point need not be in the 2k mini-instruction cache, +//it can be temporarily placed in the main instruction cache unlocked +// ******************************************************************************************* + +InitializeCont1: +//pc - 0-0x4000, 0x04000000-0x04004000, 0xa000000-0xffffffff + InitIC_Clocks r0,sp + InitUART r0,sp,FFUART_BASE,BAUDRATE + InitUART r0,sp,BTUART_BASE,BAUDRATE + InitUART r0,sp,STUART_BASE,9600 + InitChangeCPUSpeed r0 + InitMemory r0,sp,r1 + BigMov r1,MACH_TYPE_SCANPASS + SaveRegisters r0,sp +// ******************************************************* + InitMMU r0 + InitPWR r0,r1,sp //out: r1 RCSR +InitializeCont2: + cmp pc,#MEM_START + bhs 89f //if in ram, must be mdebug + bic sp,pc,#FLASH_BASE_ADDRESS + cmp sp,#0x4000 + mov r2,#FUNC_REQ_GL + bhs 87f //br if not part of reset vector + tst r1,#RCSR_SLEEP_RESET + beq 89f //; Not sleep. + mov r2,#FUNC_REQ_WAKEUP +87: adr r7,88f + adr lr,89f + mov r10,r1 //RCSR + b TryRoutine1 +88: ldmia sp,{rPrevNum1,rUart,rDBG} +89: + mov r2,lr + bl CalcMemEnd + mov r3,r0 + mov lr,r2 +// ******************************************************* +//0xnnnn0000 - 16k remapping of flash address 0 for relocated vector table +//0xnnnn4000 - 16k 16k 1st level descriptors table +//0xnnnn8000 - 16k 2 x 1k 2nd level descriptor tables +//0xnnnnc000 - 16k 12k skipped, 4k debug data +//end of ram + BigSub sp,r3,0x8000 + sub r2,sp,#0x4000 + mov r1,r2 + BigMov r0,0x0402 //section descriptor, ap-01, privileged r/w + //map virt to phys 1-to-1, non-cache, non-bufferable +1: str r0,[r2],#4 + add r0,r0,#1<<20 + cmp r2,sp + bne 1b + + + add sp,r1,r3,LSR #(20-2) + add r1,r1,#((MEM_START>>20)&0xfff)<<2 //microsoft assembler bug propagates the sign bit + BigMov r0,(MEM_START&0xfff00000)+0x040A //cacheable (write through) +2: str r0,[r1],#4 + cmp r1,sp + addne r0,r0,#1<<20 + bne 2b +//r0 is physical address of last meg of memory + orr r1,r2,#1 //2nd level descriptor address (1k boundary), coarse page table + + .ifdef __ARMASM + GBLA TABLE_CNT + .endif + .if ((DEBUG_START&0xfff00000) - (0xffff0000&0xfff00000)) + .set TABLE_CNT,2 + str r1,[r2,#((DEBUG_START>>18)&0x3ffc)-0x4000] //r2 is the end of the 16k table + add r1,r1,#0x400 + + .else + .set TABLE_CNT,1 + .endif + + str r1,[r2,#-4] //map (0xfff00000) to 2nd level page table + //last meg of memory (contains relocated reset vector) + add sp,r2,#((256*TABLE_CNT)-16)<<2 //256 - 4byte entries each mapping 4k + +//clear out 1 or 2 level 2 page tables + mov r1,#0 +3: str r1,[r2],#4 + cmp r2,sp + bne 3b + + + BigMov r1,0x559 //map to flash in 1 - 64k page + add sp,sp,#16<<2 +4: str r1,[r2],#4 + cmp r2,sp + bne 4b + + bic r0,r0,#0x000ff + orr r0,r0,#0x0000e //cacheable writeback 4k page +// orr r0,r0,#0x0000a //cacheable writethru 4k page + orr r0,r0,#0x00aa0 //privileged r/w, user read + orr r0,r0,#0xff000 //last 4k of ram + + str r0,[r2,#((DEBUG_START>>10)&0x3fc)-(TABLE_CNT*0x400)] //debug variables, r2 is end of 1k tables + + BigMov r0,0xffffffff + CP15_DACR mcr,r0 + + BigSub r0,r3,0xc000 //MEM_END-0xc000 + CP15_TTBR mcr,r0 +//enable MMU + CP15_TLB_UNLOCK_I mcr,r0 + CP15_TLB_UNLOCK_D mcr,r0 + CP15_TLB_INVAL_BOTH mcr,r0 + + CP15_CONTROL mrc,r1 //get the control register + orr r1,r1,#0x1 //set bit 0 - enable MMU + CPWAIT r0 + CP15_CONTROL mcr,r1 //set the control register + CPWAIT r0 + +//enable the instruction cache + CP15_CF_UNLOCK_I mcr,r0 +// CP15_CF_INVAL_I mcr,r0 //I might be running from cache only, don't invalidate + + orr r1,r1,#0x1000 //set bit 12 -- the I bit + CP15_CONTROL mcr,r1 //set the control register + CPWAIT r0 + +//enable the data cache + CP15_CF_UNLOCK_D mcr,r0 + CP15_CF_INVAL_D mcr,r0 //this will also drain write buffer + CP15_CF_DRAIN mcr,r0 //make sure it is drained just to be very safe + + orr r1,r1,#0x4 //set bit 4 -- the D bit + CP15_CONTROL mcr,r1 //set the control register + CPWAIT r0 + + .if 0 +//if not in halt mode, lock 64k of flash remap in instruction TLB(contains override relocated vector table) +//halt mode uses the mini cache and physical addresses only for this + CP14_DCSR mrc,r0 + BigMov r1,0xffff0000 + tst r0,#0x40000000 +//I am currently executing from flash, marked as uncacheable + CP15_TLB_LOCK_IENTRY mcreq,r1 //lock 64k if not in halt mode + CPWAIT r0 + .endif + +//now lock debug data into data cache + BigMov r1,DEBUG_START + mov r2,#DEBUG_SPACE>>5 //3 or 4 cache lines to lock + CP15_TLB_LOCK_DENTRY mcr,r1 + mov sp,#1 + CP15_CF_LOCK_D_CSR mcr,sp //data cache is into lock mode + CPWAIT r0 +5: pld [r1] + add r1,r1,#32 //lock and load + CP15_CF_DRAIN mcr,r0 + subs r2,r2,#1 + bne 5b + + mov sp,#0 + CP15_CF_LOCK_D_CSR mcr,sp //data cache is out of lock mode + CPWAIT r0 + + BigMov r0,0x3fff + CP15_CP_ACCESS mcr,r0 //enable access to all coprocessors +//now disable MMU, Data Cache + .if 1 + CP15_CONTROL mrc,r1 //get the control register + bic r1,r1,#0x5 + CP15_CONTROL mcr,r1 //set the control register + CPWAIT r0 + .endif +#if (DO_GPTEST==0) +// TransMacro L1(U) + +#if (PLATFORM_TYPE==BD2003) || (PLATFORM_TYPE==BOUNDARY_OLD_BOARD) || (PLATFORM_TYPE==OLD_GAME_CONTROLLER) || (PLATFORM_TYPE==HALOGEN) + sub r0,r3,#0x100000 //last meg-8k for video ram + sub r1,r3,#0x2000 //8K from end, last 4k is debug variables + str r1,[r1,#FDESC_FDADR] //next frame descriptor address, loop to self + str r0,[r1,#FDESC_FSADR] //start of frame + str r0,[r1,#FDESC_FIDR] //id of frame, anything I want + BigMov r2,SCREEN_WIDTH*SCREEN_HEIGHT*BYTES_PER_PIXEL + str r2,[r1,#FDESC_DCMD] //length of dma transfer + +#if (BYTES_PER_PIXEL==2) + BigMov sp,(BLUE_VAL<<0)+(GREEN_VAL<<5)+(RED_VAL<<11) //rgb value + orr sp,sp,sp,LSL #16 +79: str sp,[r0],#4 + subs r2,r2,#4 + bne 79b +#else + BigMov r1,(BLUE_VAL<<0)+(GREEN_VAL<<6)+(RED_VAL<<12) //rgb value + orr r1,r1,r1,LSL #24 + + mov sp,r1,LSR #8 + orr sp,sp,sp,LSL #24 + + mov lr,sp,LSR #8 + orr lr,lr,lr,LSL #24 +79: stmia r0!,{r1,sp,lr} + subs r2,r2,#12 + bne 79b + sub r1,r3,#0x2000 //8K from end, last 4k is debug variables +#endif + + InitLCD r0,sp,r1 //r1 has descriptor address +#endif + + +// **************************** + mrs r1, CPSR + bic r2, r1,#PSR_MODE_MASK + orr r0, r2,#PSR_NOINTS_MASK+PSR_MODE_SVC //change to supervisor stack + msr CPSR_c, r0 + BigMov r0,SS_START+SS_SUPERVISOR + mov sp, r0 + + orr r2, r2, #PSR_NOINTS_MASK+PSR_MODE_IRQ //irq stack + msr CPSR_c, r2 + BigAdd sp, r0, SS_IRQ + + sub r2, r2, #PSR_MODE_IRQ-PSR_MODE_FIQ //fiq stack + msr CPSR_c, r2 + BigAdd sp, r0, SS_IRQ+SS_FIQ + + add r2, r2, #PSR_MODE_SYSTEM-PSR_MODE_FIQ //system(user mode) + msr CPSR_c, r2 + BigAdd sp, r0, SS_IRQ+SS_FIQ+SS_SYSTEM + + sub r2, r2, #PSR_MODE_SYSTEM-PSR_MODE_UNDEF //undefined stack + msr CPSR_c, r2 + BigAdd sp, r0, SS_IRQ+SS_FIQ+SS_SYSTEM+SS_UNDEFINED + + sub r2, r2, #PSR_MODE_UNDEF-PSR_MODE_ABORT //Abort stack + msr CPSR_c, r2 + BigAdd sp, r0, SS_IRQ+SS_FIQ+SS_SYSTEM+SS_UNDEFINED+SS_ABORT +// + msr CPSR_c, r1 + sub r2, r2, #PSR_MODE_ABORT-PSR_MODE_SVC //supervisor stack + +// **************************** + CP14_DCSR mrc,sp + tst sp,#1<<5 //test sticky abort bit + mov sp,r0 + BigMovEq r0,DEBUG_BASE+DBG_MAGIC + BigAddNe r0,r3,(-0x1000+((DEBUG_BASE+DBG_MAGIC)&0xfff)) //don't use virtual address if memory isn't working right + sub r0,r0,#DBG_MAGIC + + and r1,r1,#PSR_MODE_MASK + mov r3,#0 + cmp r1,#PSR_MODE_DEBUG + BigMov lr,0xa0008000 //default start pc + beq SaveDebug //br if a debug exception in halt mode + mov r1,#SIG_RESET + b SaveR4andUp +#else +//#define GPBIT 2 +//#define GPL GPLR1 +#define GPBIT 9 +#define GPL GPLR0 +#define GPMASK (1< + * Copyright (C) 1999 Magnus Damm + * Copyright (C) 2000 Wolfgang Denk + * Copyright (C) 2001 Alex Zuepke + * Copyright (C) 2002 Kyle Harris + * Copyright (C) 2003 Robert Schwebel + * Copyright (C) 2003 Kai-Uwe Bloem + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#define Mode_SVC 0x13 +#define NoIntsMask 0xc0 +.globl _bss_start +.globl _bss_end + +//defined globals +.globl HeadStart +.globl _armboot_start + +//r3 - display type +HeadStart: + mov r8,r0 //there is a check for this instruction before jumping here + +// ******************************************************************** +// Set processor into Supervisior mode (SVC) and disable IRQ & FIQ +// + mrs r0, CPSR + bic r0, r0,#0x1f + orr r0, r0,#(Mode_SVC | NoIntsMask) + msr cpsr_c, r0 +//exit SDS, if currently active + msr SPSR, r0 + adr lr,1f + movs pc,lr +1: + b relocate +// ******************************************************************** +_armboot_start: +_TEXT_BASE: .word TEXT_BASE + +_start_armboot: .word start_armboot +/* + * These are defined in the board-specific linker script. + */ +_bss_start: .word __bss_start +_bss_end: .word _end + +#ifdef CONFIG_USE_IRQ +/* IRQ stack memory (calculated at run-time) */ +.globl IRQ_STACK_START +IRQ_STACK_START: + .word 0x0badc0de + +/* IRQ stack memory (calculated at run-time) */ +.globl FIQ_STACK_START +FIQ_STACK_START: + .word 0x0badc0de +#endif + +relocate: /* relocate U-Boot to RAM */ + adr r0, HeadStart /* r0 <- current position of code */ + bic r0,r0,#0xff + bic r0,r0,#0xff00 //64k aligned + ldr r1, _TEXT_BASE + cmp r0, r1 /* don't reloc during debug */ + beq stack_setup + + ldr r2, _bss_start + +copy_loop: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r1, r2 /* until dest end addreee [r2] */ + ble copy_loop + + /* Set up the stack */ +stack_setup: + ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ + BigSub2 r0,(CFG_MALLOC_LEN+CFG_GBL_DATA_SIZE+CFG_MMU_SPACE_RESERVED) //malloc area,bdinfo +#ifdef CONFIG_USE_IRQ + sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) +#endif + sub sp, r0, #12 /* leave 3 words for abort-stack */ + +clear_bss: + ldr r0, _bss_start /* find start of bss segment */ + ldr r1, _bss_end /* stop here */ + mov r2, #0x00000000 /* clear */ + +clbss_l:str r2, [r0] /* clear loop... */ + add r0, r0, #4 + cmp r0, r1 + bne clbss_l + bl dcache_enable + + ldr pc, _start_armboot + + +FlushCache: + CP15_CONTROL mrc,r0 + tst r0, #4 //is data cache enabled + beq 2f +// b 2f + mov r1, #2048 + add r0,pc,#0x20000 //make sure I don't alloc a line in this subroutine + BigBic2 r0, 0xffff +1: CP15_CF_ALLOC_LINE mcr,r0 + add r0, r0, #0x20 + subs r1, r1, #1 + bne 1b + + CP15_CF_DRAIN mcr,r0 + CPWAIT r0 +2: CP15_CF_INVAL_BOTH mcr,r0 + CPWAIT r0 + mov pc, lr + + + +//void dcache_disable (void) +.globl dcache_disable +dcache_disable: + mov r3,lr + bl FlushCache + CP15_CONTROL mrc,r1 + + BigBic2 r1, 0x2805 //disable high vector, branch target buffer, disable data cache, MMU + .balignl 32,0xe1a00000 //cacheline boundary (32 bytes) + //Needed so that if new flash is burnt + //and flash != ram copy, + //mov pc, r3 will be in cache and execute correctly + //(r3 is 0) return to the reset vector + CP15_CONTROL mcr,r1 + CPWAIT r0 + mov pc, r3 + + +//int dcache_status (void) +.globl dcache_status +dcache_status: + CP15_CONTROL mrc,r0 //get the control register + and r0,r0,#1 + mov pc,lr + +#define MEM_START1 0xa0000000 +#define MEM_END1 0xa4000000 +//void dcache_enable (void) +.globl dcache_enable +dcache_enable: + stmdb sp!,{r5,r6,lr} + bl FlushCache +#if !defined(CFG_MMU_SPACE_RESERVED) || (CFG_MMU_SPACE_RESERVED<(1<<14)) + mov r0,#1<<15 //16k plus alignment of 16k + bl malloc + add r6,r0,#(1<<14) //16k alignment + BigBic2 r6,(1<<14)-1 +#else + ldr r6, _TEXT_BASE /* upper 128 KiB: relocated uboot */ + BigSub2 r6,(CFG_MMU_SPACE_RESERVED) //malloc area,bdinfo +#endif + mov r2,r6 + add r5,r6,#(1<<14) //16k 1st level page table + BigMov r0,0x0402 //section descriptor, ap-01, privileged r/w + //map virt to phys 1-to-1, non-cache, non-bufferable +1: str r0,[r2],#4 + add r0,r0,#1<<20 + cmp r2,r5 + bne 1b + + + mov r3,#MEM_END1 + add r5,r6,r3,LSR #(20-2) + add r1,r6,#(MEM_START1>>20)<<2 + BigMov r0,(MEM_START1&0xfff00000)+0x040A //cacheable (write through) +2: str r0,[r1],#4 + cmp r1,r5 + addne r0,r0,#1<<20 + bne 2b + + BigMov r0,0xffffffff + CP15_DACR mcr,r0 + + CP15_TTBR mcr,r6 +//enable MMU + CP15_TLB_UNLOCK_I mcr,r0 + CP15_TLB_UNLOCK_D mcr,r0 + CP15_TLB_INVAL_BOTH mcr,r0 + + CP15_CONTROL mrc,r1 //get the control register + BigOrr2 r1,0x201 // enable MMU, r bit + BigBic2 r1,0x100 // disable S bit, ap -0 means read only by all + CPWAIT r0 + CP15_CONTROL mcr,r1 //set the control register + CPWAIT r0 + +//enable the instruction cache + CP15_CF_UNLOCK_I mcr,r0 +// CP15_CF_INVAL_I mcr,r0 //I might be running from cache only, don't invalidate + + orr r1,r1,#0x1000 //set bit 12 -- the I bit + CP15_CONTROL mcr,r1 //set the control register + CPWAIT r0 + +//enable the data cache +// CP15_CF_UNLOCK_D mcr,r0 + CP15_CF_INVAL_D mcr,r0 //this will also drain write buffer + CP15_CF_DRAIN mcr,r0 //make sure it is drained just to be very safe + + orr r1,r1,#0x4 //set bit 4 -- the D bit + CP15_CONTROL mcr,r1 //set the control register + CPWAIT r0 + + BigMov r0,0x3fff + CP15_CP_ACCESS mcr,r0 //enable access to all coprocessors + ldmia sp!,{r5,r6,pc} + + + +/****************************************************************************/ +/* */ +/* Reset function: the PXA250 doesn't have a reset function, so we have to */ +/* perform a watchdog timeout for a soft reset. */ +/* */ +/****************************************************************************/ +.globl reset_cpu + /* FIXME: this code is PXA250 specific. How is this handled on */ + /* other XScale processors? */ + +reset_cpu: + BigMov r0,0x40a00000 //OSTIMER_BASE + /* We set OWE:WME (watchdog enable) and wait until timeout happens */ + + ldr r1, [r0, #OWER] + orr r1, r1, #0x0001 /* bit0: WME */ + str r1, [r0, #OWER] + + /* OS timer does only wrap every 1165 seconds, so we have to set */ + /* the match register as well. */ + + ldr r1, [r0, #OSCR] /* read OS timer */ + add r1, r1, #0x800 /* let OSMR3 match after */ + add r1, r1, #0x800 /* 4096*(1/3.6864MHz)=1ms */ + str r1, [r0, #OSMR3] + +reset_endless: + b reset_endless diff -u -r --new-file u-boot-1.1.2/cpu/pxa/mmc.c u-boot-1.1.2-neon/cpu/pxa/mmc.c --- u-boot-1.1.2/cpu/pxa/mmc.c 2003-10-16 01:53:52.000000000 +0200 +++ u-boot-1.1.2-neon/cpu/pxa/mmc.c 2007-08-11 21:07:20.000000000 +0200 @@ -27,6 +27,7 @@ #include #include #include +#include #ifdef CONFIG_MMC @@ -47,9 +48,19 @@ static uchar mmc_buf[MMC_BLOCK_SIZE]; static mmc_csd_t mmc_csd; static int mmc_ready = 0; +static int isSD = 0 ; +static int startBlock = 0 ; +static ushort RCA = MMC_DEFAULT_RCA ; +static struct partition part ; +static void stop_clock( void ) +{ + MMC_STRPCL = MMC_STRPCL_STOP_CLK; + MMC_I_MASK = ~MMC_I_MASK_CLK_IS_OFF; + while (!(MMC_I_REG & MMC_I_REG_CLK_IS_OFF)); +} -static uchar * +uchar * /****************************************************/ mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat) /****************************************************/ @@ -59,9 +70,8 @@ int words, i; debug("mmc_cmd %x %x %x %x\n", cmd, argh, argl, cmdat); - MMC_STRPCL = MMC_STRPCL_STOP_CLK; - MMC_I_MASK = ~MMC_I_MASK_CLK_IS_OFF; - while (!(MMC_I_REG & MMC_I_REG_CLK_IS_OFF)); + stop_clock(); + MMC_CMD = cmd; MMC_ARGH = argh; MMC_ARGL = argl; @@ -71,9 +81,10 @@ while (!(MMC_I_REG & MMC_I_REG_END_CMD_RES)); status = MMC_STAT; - debug("MMC status %x\n", status); + debug("MMC status %lx\n", status); if (status & MMC_STAT_TIME_OUT_RESPONSE) { + printf( "mmc_cmd timeout: cmd: 0x%x, args: 0x%04x%04x, status 0x%lx\n", cmd, argh, argl, status ); return 0; } @@ -85,7 +96,7 @@ break; case MMC_CMDAT_R2: - words = 8; + words = 9; break; default: @@ -109,6 +120,22 @@ return resp; } +static void mmc_setblklen( ulong blklen ) +{ + static ulong prevLen = -1UL ; + if( blklen != prevLen ) + { + ushort argh, argl ; + + argh = blklen >> 16; + argl = blklen & 0xffff; + + /* set block len */ + mmc_cmd( MMC_CMD_SET_BLOCKLEN, argh, argl, MMC_CMDAT_R1); + prevLen = blklen ; + } +} + int /****************************************************/ mmc_block_read(uchar *dst, ulong src, ulong len) @@ -117,20 +144,18 @@ uchar *resp; ushort argh, argl; ulong status; + unsigned char volatile *rxFIFO = (unsigned char *)&(MMC_RXFIFO); if (len == 0) { return 0; } - debug("mmc_block_rd dst %lx src %lx len %d\n", (ulong)dst, src, len); + debug("mmc_block_rd dst %lx src %lx len %ld\n", (ulong)dst, src, len); - argh = len >> 16; - argl = len & 0xffff; - - /* set block len */ - resp = mmc_cmd(MMC_CMD_SET_BLOCKLEN, argh, argl, MMC_CMDAT_R1); + mmc_setblklen( len ); + src += (startBlock*MMC_BLOCK_SIZE); /* send read command */ argh = src >> 16; argl = src & 0xffff; @@ -147,15 +172,14 @@ { if (MMC_I_REG & MMC_I_REG_RXFIFO_RD_REQ) { - *dst++ = MMC_RXFIFO; - len--; - } - status = MMC_STAT; - if (status & MMC_STAT_ERRORS) - { - printf("MMC_STAT error %lx\n", status); - return -1; + int i, bytes = min(32,len); + len -= bytes; + + for (i=0; i> 16, + src & 0xFFFF, + MMC_CMDAT_R1|MMC_CMDAT_READ|MMC_CMDAT_BLOCK|MMC_CMDAT_DATA_EN ); + + // read the data + for( blknr = 0 ; blknr < blkcnt ; blknr++ ) + { + unsigned len = MMC_BLOCK_SIZE ; + + while (len) + { + int i ; + MMC_I_MASK = ~MMC_I_MASK_RXFIFO_RD_REQ; + while( (MMC_I_REG & MMC_I_REG_RXFIFO_RD_REQ) == 0 ) + { + } + + for (i = 0; i < 32 ; i++ ) + { + *dstb++ = *rxFIFO ; + } + len -= 32 ; + } + } // for each block + + MMC_I_MASK = ~MMC_I_MASK_DATA_TRAN_DONE; + while (!(MMC_I_REG & MMC_I_REG_DATA_TRAN_DONE)); + status = MMC_STAT; + if (status & MMC_STAT_ERRORS) + { + printf("MMC_STAT error %lx\n", status); + return -1; + } +// printf( "completed mread... now stop\n" ); + + mmc_cmd( MMC_CMD_STOP, 0, 0, MMC_CMDAT_R1); + + } // multi-block read + } // or why bother? return blkcnt; } +static void dumpResponse( uchar *resp, unsigned bytes ) +{ + debug( "rsp: " ); + if( resp ) + { + while( bytes-- ) + debug( "%02X ", *resp++ ); + debug( "\n" ); + } + else + debug( "NULL\n" ); +} + +int SDCard_test( void ) +{ + unsigned short response ; + unsigned long ignore ; + unsigned char *resp ; + + mmc_cmd(0, 0, 0, 0); + + resp = mmc_cmd(SD_APP_CMD55, 0, 0, MMC_CMDAT_R1); + if( !resp ) + { + printf( "SDInitErr1\n" ); + return -ENODEV ; + } + + resp = mmc_cmd(SD_APP_CMD41, 0x0020, 0, MMC_CMDAT_INIT|MMC_CMDAT_R1); + if( !resp ) + { + printf( "SDInitErr2\n" ); + return -ENODEV ; + } + + memcpy( &response, resp, sizeof( response ) ); + + while (response != 0x3f80)//continue doing ACMD1 until busy bit in response is set + { + //CMD55 APP_CMD + MMC_STRPCL = 0x00000001;//stop clock + while ((MMC_STAT & 0x00000100) == 0x00000100); //wait for clock to stop + MMC_CMD = 0x00000037;//CMD55 index APP_CMD + MMC_ARGH = 0x00000000;//relative card address 0x0 + MMC_ARGL = 0x00000000;//stuff bits + MMC_CMDAT = 0x00000001;//expect response 1 + MMC_STRPCL = 0x00000002;//start clock + while ((MMC_STAT & 0x00002000) == 0x00000000);//wait for end_cmd_res + //read response FIFO + response = MMC_RES & 0x0000ffff ; + ignore = MMC_RES ; + ignore = MMC_RES ; + + //ACMD41 + MMC_STRPCL = 0x00000001;//stop clock + while ((MMC_STAT & 0x00000100) == 0x00000100); //wait for clock to stop + MMC_CMD = 0x00000029;//ACMD41 index SD_APP_SEND_OP_COND + MMC_ARGH = 0x00000020;//set voltage limit of system in command argument + MMC_ARGL = 0x00000000; + MMC_CMDAT = 0x00000003;//expect response 3 + MMC_STRPCL = 0x00000002;//start clock + while ((MMC_STAT & 0x00002000) == 0x00000000);//wait for end_cmd_res + + //read response FIFO + response = MMC_RES & 0x0000ffff ; + ignore = MMC_RES ; + ignore = MMC_RES ; + } + + return 0 ; +} + +#ifdef DEBUG +static void print_mmc_csd( struct mmc_csd *csd ) +{ + printf( "ecc: %u\n", csd->ecc ); + printf( "file_format: %u\n", csd->file_format ); + printf( "tmp_write_protect: %u\n", csd->tmp_write_protect ); + printf( "perm_write_protect: %u\n", csd->perm_write_protect ); + printf( "copy: %u\n", csd->copy ); + printf( "file_format_grp: %u\n", csd->file_format_grp ); + printf( "content_prot_app: %u\n", csd->content_prot_app ); + printf( "rsvd3: %u\n", csd->rsvd3 ); + printf( "write_bl_partial: %u\n", csd->write_bl_partial ); + printf( "write_bl_len: %u\n", csd->write_bl_len ); + printf( "r2w_factor: %u\n", csd->r2w_factor ); + printf( "default_ecc: %u\n", csd->default_ecc ); + printf( "wp_grp_enable: %u\n", csd->wp_grp_enable ); + printf( "wp_grp_size: %u\n", csd->wp_grp_size ); + printf( "erase_grp_mult: %u\n", csd->erase_grp_mult ); + printf( "erase_grp_size: %u\n", csd->erase_grp_size ); + printf( "c_size_mult1: %u\n", csd->c_size_mult1 ); + printf( "vdd_w_curr_max: %u\n", csd->vdd_w_curr_max ); + printf( "vdd_w_curr_min: %u\n", csd->vdd_w_curr_min ); + printf( "vdd_r_curr_max: %u\n", csd->vdd_r_curr_max ); + printf( "vdd_r_curr_min: %u\n", csd->vdd_r_curr_min ); + printf( "c_size: %u\n", csd->c_size ); + printf( "rsvd2: %u\n", csd->rsvd2 ); + printf( "dsr_imp: %u\n", csd->dsr_imp ); + printf( "read_blk_misalign: %u\n", csd->read_blk_misalign ); + printf( "write_blk_misalign: %u\n", csd->write_blk_misalign ); + printf( "read_bl_partial: %u\n", csd->read_bl_partial ); + printf( "read_bl_len: %u\n", csd->read_bl_len ); + printf( "ccc: %u\n", csd->ccc ); + printf( "tran_speed %u\n", csd->tran_speed ); + printf( "nsac; %u\n", csd->nsac ); + printf( "taac; %u\n", csd->taac ); + printf( "rsvd1: %u\n", csd->rsvd1 ); + printf( "spec_vers: %u\n", csd->spec_vers ); + printf( "csd_structure: %u\n", csd->csd_structure ); +} +#endif + +#define DOS_PART_MAGIC_OFFSET 0x1fe +#define DOS_FS_TYPE_OFFSET 0x36 +#define MSDOS_LABEL_MAGIC1 0x55 +#define MSDOS_LABEL_MAGIC2 0xAA + +struct bpb { // see http://staff.washington.edu/dittrich/misc/fatgen103.pdf + unsigned char jump[3]; + char oemName[8]; + unsigned short bytesPerSector ; + unsigned char sectorsPerCluster ; + unsigned short reservedSectorCount ; + unsigned char numFats ; + unsigned short rootEntCount ; + unsigned short totalSec16 ; + unsigned char media ; // 0xF8 + unsigned short fatSz16 ; + unsigned short secPerTrack ; + unsigned short numHeads ; + unsigned long hiddenSectors ; + unsigned long totalSectors32 ; + unsigned char driveNum ; + unsigned char reserved1 ; // 0x00 + unsigned char bootSig ; // 0x29 + unsigned long volumeId ; + char volumeLabel[11]; + char fileSysType[8]; +} __attribute__((packed)); + +#define isprint(__c) (((__c)>=0x20)&&((__c)<=0x7f)) + +static int find_mbr( int max_blocks ) +{ + int i ; + ulong addr = 0 ; + +printf( "---- searching %d blocks for MBR\n", max_blocks ); + + for( i = 0 ; i < 10 ; i++, addr += MMC_BLOCK_SIZE ) + { + uchar data[MMC_BLOCK_SIZE]; + if( 0 == mmc_block_read(data, addr, sizeof(data) )) + { + memcpy( &part, data+0x1be, sizeof(part)); + if( ( data[DOS_PART_MAGIC_OFFSET] == MSDOS_LABEL_MAGIC1 ) + && + ( data[DOS_PART_MAGIC_OFFSET + 1] == MSDOS_LABEL_MAGIC2 ) ) + { + if( ( ('\x00' == part.boot_ind ) + || + ('\x80' == part.boot_ind ) ) + && + ( 10 > part.head ) + && + ( part.end_head >= part.head ) ) + { + printf( "partition info found at block %u\n", i ); + printf( "boot:%02x head:%02x sec:%02x cyl:%02x sys:%02x endh:%02x ends:%02x endc:%02x start:%08x, count:%08x\n", + part.boot_ind, part.head, part.sector, part.cyl, + part.sys_ind, part.end_head, part.end_sector, part.end_cyl, + part.start_sect, part.nr_sects ); + printf( "MBR found at block %d\n", i ); + return part.start_sect ; + } + else { + struct bpb const *bootParams = (struct bpb *)data ; + unsigned j ; + for( j = 0 ; j < sizeof(data); j++ ) + { + if( 0 == ( j & 0x0f ) ) + printf( "%04x ", j ); + printf( "%02x ", data[j] ); + if( 7 == ( j & 7 ) ) + printf( " " ); + if( 0x0f == ( j & 0x0f ) ) + { + unsigned b ; + for( b = j-15 ; b <= j ; b++ ) + { + uchar c = data[b]; + if( isprint(c) ) + printf( "%c", c ); + else + printf( "." ); + if( 7 == ( b & 7 ) ) + printf( " " ); + } + printf( "\n" ); + } + } + printf( "Invalid MBR\n" ); + printf( "---> Boot Parameter block\n" ); + printf( "jump %02x %02x %02x\n", bootParams->jump[0],bootParams->jump[1],bootParams->jump[2]); + printf( "bytesPerSector: %04x\n", bootParams->bytesPerSector ); + printf( "sectorsPerCluster: %02x\n", bootParams->sectorsPerCluster ); + printf( "reservedSectors %04x\n", bootParams->reservedSectorCount ); + printf( "numFats: %02x\n", bootParams->numFats ); + printf( "rootEntCount: %04x\n", bootParams->rootEntCount ); + printf( "totalSec16: %04x\n", bootParams->totalSec16 ); + printf( "media: %02x\n", bootParams->media ); + printf( "fatsz16: %04x", bootParams->fatSz16 ); + printf( "secPerTrack: %04x\n", bootParams->secPerTrack ); + printf( "numHeads = %04x\n", bootParams->numHeads ); + printf( "hidden = %08lx\n", bootParams->hiddenSectors ); + printf( "totalSec32 = %08lx\n", bootParams->totalSectors32 ); + printf( "drive #%u\n", bootParams->driveNum ); + printf( "reserved1: %02x\n", bootParams->reserved1 ); + printf( "bootSig: %02x\n", bootParams->bootSig ); + printf( "volume: %08lx\n", bootParams->volumeId ); + part.boot_ind = 0 ; + part.head = 0 ; + part.sector = 2 ; + part.cyl = 0 ; + part.sys_ind = 6 ; + part.end_head = bootParams->numHeads ; + part.end_sector = 0xe0 ; + part.end_cyl = 0xc9 ; + part.start_sect = 0 ; + part.nr_sects = bootParams->totalSectors32 ; + printf( "partition info found at block %u\n", i ); + printf( "boot:%02x head:%02x sec:%02x cyl:%02x sys:%02x endh:%02x ends:%02x endc:%02x start:%08x, count:%08x\n", + part.boot_ind, part.head, part.sector, part.cyl, + part.sys_ind, part.end_head, part.end_sector, part.end_cyl, + part.start_sect, part.nr_sects ); + printf( "MBR found at block %d\n", i ); + return 0 ; + } + } + } + else + { + printf( "!!! Error reading mmc block %u\n", i ); + break; + } + } + + printf( "MBR not found!\n" ); + return -1 ; +} + int /****************************************************/ mmc_init(int verbose) @@ -406,7 +741,8 @@ { int retries, rc = -ENODEV; uchar *resp; - + mmc_cid_t *cid ; + mmc_csd_t *csd ; #ifdef CONFIG_LUBBOCK set_GPIO_mode( GPIO6_MMCCLK_MD ); set_GPIO_mode( GPIO8_MMCCS0_MD ); @@ -419,23 +755,63 @@ MMC_RESTO = MMC_RES_TO_MAX; MMC_SPI = MMC_SPI_DISABLE; + if( 0 == SDCard_test() ) + { + printf( "SD card detected!\n" ); + isSD = 1 ; + } + else + { + isSD = 0 ; + /* reset */ - retries = 10; - resp = mmc_cmd(0, 0, 0, 0); + mmc_cmd(0, 0, 0, 0); resp = mmc_cmd(1, 0x00ff, 0xc000, MMC_CMDAT_INIT|MMC_CMDAT_BUSY|MMC_CMDAT_R3); - while (retries-- && resp && !(resp[4] & 0x80)) + if( 0 == resp ) + { + printf( "MMC CMD1 error\n" ); + return -1 ; + } + + printf( "init: " ); dumpResponse( resp, 6 ); + retries = 0 ; + do { - debug("resp %x %x\n", resp[0], resp[1]); - udelay(50); + udelay(100); resp = mmc_cmd(1, 0x00ff, 0xff00, MMC_CMDAT_BUSY|MMC_CMDAT_R3); + debug( "cmd1: " ); dumpResponse( resp, 6 ); + retries++ ; + } while( resp && ( 0 == ( resp[4] & 0x80 ) ) ); + + if( 0 == resp ) + { + printf( "MMC CMD1 error2\n" ); + return -1 ; + } + + do { + udelay(100); + resp = mmc_cmd(1, 0x00ff, 0xff00, MMC_CMDAT_BUSY|MMC_CMDAT_R3); + debug( "cmd1: " ); dumpResponse( resp, 6 ); + retries++ ; + } while( resp && ( 0 != ( resp[4] & 0x80 ) ) ); + + printf( "after busy: %s, %d retries\n", + resp ? "have INIT response" + : "no INIT response", + retries ); } /* try to get card id */ resp = mmc_cmd(2, 0, 0, MMC_CMDAT_R2); - if (resp) + if( !resp ) { + printf( "Bad CMDAT_R2 response\n" ); + return -1 ; + } + /* TODO configure mmc driver depending on card attributes */ - mmc_cid_t *cid = (mmc_cid_t *)resp; + cid = (mmc_cid_t *)resp; if (verbose) { printf("MMC found. Card desciption is:\n"); @@ -449,6 +825,12 @@ printf("Month = %d\n",cid->month); printf("Year = %d\n",1997 + cid->year); } + sprintf(mmc_dev.product,"%s",cid->name); + sprintf(mmc_dev.vendor,"Man %02x%02x%02x Snr %02x%02x%02x", + cid->id[0], cid->id[1], cid->id[2], + cid->sn[0], cid->sn[1], cid->sn[2]); + sprintf(mmc_dev.revision,"%x %x",cid->hwrev, cid->fwrev); + /* fill in device description */ mmc_dev.if_type = IF_TYPE_MMC; mmc_dev.dev = 0; @@ -457,30 +839,118 @@ /* FIXME fill in the correct size (is set to 32MByte) */ mmc_dev.blksz = 512; mmc_dev.lba = 0x10000; - sprintf(mmc_dev.vendor,"Man %02x%02x%02x Snr %02x%02x%02x", - cid->id[0], cid->id[1], cid->id[2], - cid->sn[0], cid->sn[1], cid->sn[2]); - sprintf(mmc_dev.product,"%s",cid->name); - sprintf(mmc_dev.revision,"%x %x",cid->hwrev, cid->fwrev); mmc_dev.removable = 0; mmc_dev.block_read = mmc_bread; /* MMC exists, get CSD too */ resp = mmc_cmd(MMC_CMD_SET_RCA, MMC_DEFAULT_RCA, 0, MMC_CMDAT_R1); - resp = mmc_cmd(MMC_CMD_SEND_CSD, MMC_DEFAULT_RCA, 0, MMC_CMDAT_R2); - if (resp) + + if( resp ) { - mmc_csd_t *csd = (mmc_csd_t *)resp; - memcpy(&mmc_csd, csd, sizeof(csd)); - rc = 0; - mmc_ready = 1; - /* FIXME add verbose printout for csd */ + if( isSD ) + RCA = ((ushort)resp[4] << 8 ) | resp[3]; + else + RCA = MMC_DEFAULT_RCA ; } + else + { + printf( "no SET_RCA response\n" ); + return -1 ; } +#if 0 +/* + * According to a Toshiba doc, the following is supposed to give + * the size of the 'protected' area (so we can ignore it). + + * Unfortunately, I can't get the numbers to add up, so we walk + * til we find an MBR instead. + */ + if( isSD ) + { + printf( "sending CMD55\n" ); + resp = mmc_cmd(SD_APP_CMD55, RCA, 0, MMC_CMDAT_R1); + if( !resp ) + { + printf( "Error 0x%04x sending APP CMD\n", MMC_STAT ); + return -1 ; + } + else + { + printf( "have CMD55 response\n" ); + memset( resp, 0, 20 ); + } + + resp = mmc_cmd(SD_STATUS, RCA, 0, MMC_CMDAT_R1 ); + if( resp ) + { + sd_status_t *status ; + int i ; + printf( "SDSTATUS returned\n" ); + for( i = 0 ; i < 16 ; i++ ) + printf( "%02x ", resp[i] ); + printf( "\n" ); + status = (sd_status_t *)resp ; + printf( "bus_width: %u\n", status->bus_width ); + printf( "secured_mode: %u\n", status->secured_mode ); + printf( "unused0: %x\n", status->unused0 ); + printf( "card_type: %x\n", status->card_type ); + printf( "prot_size: %lx\n", status->prot_size ); + } + else + { + printf( "Error reading SD_STATUS\n" ); + return -1 ; + } + } +#endif + + MMC_STRPCL = MMC_STRPCL_STOP_CLK; + MMC_I_MASK = ~MMC_I_MASK_CLK_IS_OFF; + while (!(MMC_I_REG & MMC_I_REG_CLK_IS_OFF)); + MMC_CLKRT = 0; /* 20 MHz */ - resp = mmc_cmd(7, MMC_DEFAULT_RCA, 0, MMC_CMDAT_R1); + resp = mmc_cmd(7, RCA, 0, MMC_CMDAT_R1); + if( !resp ) + { + printf( "Error selecting RCA %x\n", RCA ); + return -1 ; + } + + resp = mmc_cmd(7, 0, 0, MMC_CMDAT_R1); + if( !resp ) + { + // this is normal + } + + resp = mmc_cmd(MMC_CMD_SEND_CSD, RCA, 0, MMC_CMDAT_R2); + if (!resp) + { + printf( "Error reading CSD\n" ); + return -1 ; + } + + csd = (mmc_csd_t *)resp; + memcpy(&mmc_csd, csd, sizeof(*csd)); + rc = 0; + +#ifdef DEBUG + dumpResponse( resp, sizeof( *csd ) ); + print_mmc_csd( csd ); +#endif + + resp = mmc_cmd(7, RCA, 0, MMC_CMDAT_R1); + if( !resp ) + { + printf( "Error selecting RCA %x\n", RCA ); + return -1 ; + } + + mmc_ready = 1; + startBlock = find_mbr(mmc_csd.c_size); + printf( "registering device: startBlock == %d, isSD ? %s\n", + startBlock, isSD ? "yes" : "no" ); fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */ return rc; @@ -503,4 +973,41 @@ return 0; } +#if (CONFIG_COMMANDS & CFG_CMD_MMC) + +int do_mmc_detect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + unsigned long gplr1 = GPLR1 ; + int rval = ( 0 != (gplr1 & 0x10) ); +#ifdef DEBUG + printf ("Checking for MMC card: %lx, %d\n", gplr1, rval ); +#endif + return rval ; +} + +U_BOOT_CMD( + mmcdet, 1, 0, do_mmc_detect, + "mmcdet - detect mmc card\n", + NULL +); + +int do_mmc_wp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + unsigned long gplr1 = GPLR1 ; + int rval = ( 0 == (gplr1 & 0x40) ); +#ifdef DEBUG + printf ("Checking MMC write protect: %lx, %d\n", gplr1, rval ); +#endif + return rval ; +} + +U_BOOT_CMD( + mmcwp, 1, 0, do_mmc_wp, + "mmcwp - detect mmc write protect\n", + NULL +); + +#endif + #endif + diff -u -r --new-file u-boot-1.1.2/cpu/pxa/pxafb.c u-boot-1.1.2-neon/cpu/pxa/pxafb.c --- u-boot-1.1.2/cpu/pxa/pxafb.c 2004-10-10 01:26:00.000000000 +0200 +++ u-boot-1.1.2-neon/cpu/pxa/pxafb.c 2007-08-11 21:07:20.000000000 +0200 @@ -36,6 +36,10 @@ #include #include +#ifdef CFG_CMD_LCDPANEL +#include +#endif + /* #define DEBUG */ #ifdef CONFIG_LCD @@ -147,6 +151,38 @@ #endif /* CONFIG_HITACHI_SX14 */ /*----------------------------------------------------------------------*/ +#ifdef CONFIG_SHARP_QVGA +/* Sharp 1/4 VGA LCD */ +#define LCD_BPP LCD_COLOR8 + +/* you have to set lccr0 and lccr3 (including pcd) */ +#define REG_LCCR0 0x003008F8 +#define REG_LCCR3 (0x0040FF0C|(LCD_BPP<<24)) + +vidinfo_t panel_info = { + vl_col: 320, + vl_row: 240, + vl_width: 167, + vl_height: 109, + vl_clkp: CFG_HIGH, + vl_oep: CFG_HIGH, + vl_hsp: CFG_HIGH, + vl_vsp: CFG_HIGH, + vl_dp: CFG_HIGH, + vl_bpix: LCD_BPP, + vl_lbw: 1, + vl_splt: 0, + vl_clor: 1, + vl_tft: 1, + vl_hpw: 64, + vl_blw: 34, + vl_elw: 1, + vl_vpw: 20, + vl_bfw: 8, + vl_efw: 3, +}; +#endif /* CONFIG_SHARP_QVGA */ + #if LCD_BPP == LCD_COLOR8 void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue); @@ -163,7 +199,6 @@ void lcd_ctrl_init (void *lcdbase); void lcd_enable (void); -int lcd_line_length; int lcd_color_fg; int lcd_color_bg; @@ -185,10 +220,28 @@ void lcd_ctrl_init (void *lcdbase) { +#ifdef CFG_CMD_LCDPANEL + char const *panelName = getenv( "panel" ); + if( panelName ) + { + struct lcd_panel_info_t const *panel ; + panel = find_lcd_panel( panelName ); + if( panel ) + { + printf( "panel %s found: %u x %u\n", panelName, panel->xres, panel->yres ); + panel_info.pxa.screen = (u_long)lcdbase; + set_lcd_panel( panel ); + } + else + printf( "panel %s not found\n", panelName ); + } +#else pxafb_init_mem(lcdbase, &panel_info); pxafb_init(&panel_info); pxafb_setup_gpio(&panel_info); pxafb_enable_controller(&panel_info); +#endif + } /*----------------------------------------------------------------------*/ @@ -204,6 +257,7 @@ void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue) { +#if defined( CONFIG_PXA250 ) struct pxafb_info *fbi = &panel_info.pxa; unsigned short *palette = (unsigned short *)fbi->palette; u_int val; @@ -219,7 +273,22 @@ palette[regno] = val; #endif } +#elif defined( CONFIG_PXA270 ) + struct pxafb_info *fbi = &panel_info.pxa; + u32 *palette = (u32 *)fbi->palette; + u32 val; + + if (regno < fbi->palette_size) { + val = 0xFF000000 ; // transparency + val |= (red << 16); + val |= (green << 8); + val |= blue ; + palette[regno] = val; + } +#else +#error no processor defined +#endif debug ("setcolreg: reg %2d @ %p: R=%02X G=%02X B=%02X => %04X\n", regno, &palette[regno], red, green, blue, @@ -284,7 +353,7 @@ fbi->screen = (u_long)lcdbase; fbi->palette_size = NBITS(vid->vl_bpix) == 8 ? 256 : 16; - palette_mem_size = fbi->palette_size * sizeof(u16); + palette_mem_size = fbi->palette_size * sizeof(PALETTEVAL_TYPE); debug("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size); /* locate palette and descs at end of page following fb */ @@ -376,11 +445,16 @@ static int pxafb_init (vidinfo_t *vid) { struct pxafb_info *fbi = &vid->pxa; + unsigned long const REG_LCCR3 = 0x0040FF0C|(LCD_BPP<<24); debug("Configuring PXA LCD\n"); - fbi->reg_lccr0 = REG_LCCR0; - fbi->reg_lccr3 = REG_LCCR3; +#if defined( CONFIG_PXA270 ) + LCCR4 = 0x00010000 ; +#endif + + fbi->reg_lccr0 = 0x003008F8; + fbi->reg_lccr3 = REG_LCCR3 ; debug("vid: vl_col=%d hslen=%d lm=%d rm=%d\n", vid->vl_col, vid->vl_hpw, @@ -429,7 +503,7 @@ fbi->dmadesc_palette->fsadr = fbi->palette; fbi->dmadesc_palette->fidr = 0; - fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL; + fbi->dmadesc_palette->ldcmd = (fbi->palette_size * sizeof(PALETTEVAL_TYPE)) | LDCMD_PAL; if( NBITS(vid->vl_bpix) < 12) { @@ -465,6 +539,39 @@ return 0; } + +#ifdef CFG_CMD_LCDPANEL + +void set_lcd_panel( struct lcd_panel_info_t const *panel ) +{ + panel_info.vl_col = panel->xres ; + panel_info.vl_row = panel->yres ; + panel_info.vl_clkp = panel->act_high ; + panel_info.vl_oep = panel->act_high ; + panel_info.vl_hsp = panel->act_high ; + panel_info.vl_vsp = panel->act_high ; + panel_info.vl_dp = panel->act_high ; + panel_info.vl_bpix = LCD_BPP ; + panel_info.vl_lcd_line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) >> 3; + panel_info.vl_lbw = 1 ; + panel_info.vl_splt = 0 ; + panel_info.vl_clor = 1 ; + panel_info.vl_tft = panel->active ; + panel_info.vl_hpw = panel->hsync_len ; + panel_info.vl_blw = panel->left_margin ; + panel_info.vl_elw = panel->right_margin ; + panel_info.vl_vpw = panel->vsync_len ; + panel_info.vl_bfw = panel->upper_margin ; + panel_info.vl_efw = panel->lower_margin ; + + pxafb_init_mem( (void *)panel_info.pxa.screen, &panel_info); + pxafb_init(&panel_info); + pxafb_setup_gpio(&panel_info); + pxafb_enable_controller(&panel_info); +} + +#endif // dynamic LCD panel support + /************************************************************************/ /************************************************************************/ diff -u -r --new-file u-boot-1.1.2/cpu/pxa/sm501_usb.h u-boot-1.1.2-neon/cpu/pxa/sm501_usb.h --- u-boot-1.1.2/cpu/pxa/sm501_usb.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/cpu/pxa/sm501_usb.h 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,66 @@ +#ifndef SM501_USB_INCLUDED +#define SM501_USB_INCLUDED + + #if defined(CONFIG_SM501) + #define USB_GATE_MODE0 __REG(0xFE00040) + #define USB_GATE_MODE1 __REG(0xFE00048) + #define ENABLE_USBH (1<<11) + + /* + * USB Host Controller + */ + #define USBH_BASE 0xFE40000 + #define UHCREV __REG(0xFE40000) + #define UHCHCON __REG(0xFE40004) + #define UHCCOMS __REG(0xFE40008) + #define UHCINTS __REG(0xFE4000C) + #define UHCINTE __REG(0xFE40010) + #define UHCINTD __REG(0xFE40014) + #define UHCHCCA __REG(0xFE40018) + #define UHCPCED __REG(0xFE4001C) + #define UHCCHED __REG(0xFE40020) + #define UHCCCED __REG(0xFE40024) + #define UHCBHED __REG(0xFE40028) + #define UHCBCED __REG(0xFE4002C) + #define UHCDHEAD __REG(0xFE40030) + #define UHCFMI __REG(0xFE40034) + #define UHCFMR __REG(0xFE40038) + #define UHCFMN __REG(0xFE4003C) + #define UHCPERS __REG(0xFE40040) + #define UHCLST __REG(0xFE40044) + #define UHCRHDA __REG(0xFE40048) + #define UHCRHDB __REG(0xFE4004C) + #define UHCRHS __REG(0xFE40050) + #define UHCRHPS1 __REG(0xFE40054) + #define UHCRHPS2 __REG(0xFE40058) + #define UHCRHPS3 __REG(0xFE4005C) + #define UHCSTAT __REG(0xFE40060) + #define UHCHR __REG(0xFE40064) + #define UHCHIE __REG(0xFE40068) + #define UHCHIT __REG(0xFE4006C) + + #define UHCHR_FSBIR (1<<0) + #define UHCHR_FHR (1<<1) + #define UHCHR_CGR (1<<2) + #define UHCHR_SSDC (1<<3) + #define UHCHR_UIT (1<<4) + #define UHCHR_SSE (1<<5) + #define UHCHR_PSPL (1<<6) + #define UHCHR_PCPL (1<<7) + #define UHCHR_SSEP0 (1<<9) + #define UHCHR_SSEP1 (1<<10) + #define UHCHR_SSEP2 (1<<11) + + #define UHCHIE_UPRIE (1<<13) + #define UHCHIE_UPS2IE (1<<12) + #define UHCHIE_UPS1IE (1<<11) + #define UHCHIE_TAIE (1<<10) + #define UHCHIE_HBAIE (1<<8) + #define UHCHIE_RWIE (1<<7) + + #define UHCCOMS_HCR 1 + #define UHCRHS_LPS 1 + #define UHCHR_SSE (1<<5) + + #endif +#endif diff -u -r --new-file u-boot-1.1.2/cpu/pxa/start.S u-boot-1.1.2-neon/cpu/pxa/start.S --- u-boot-1.1.2/cpu/pxa/start.S 2004-06-09 02:11:02.000000000 +0200 +++ u-boot-1.1.2-neon/cpu/pxa/start.S 2007-08-11 21:07:20.000000000 +0200 @@ -61,23 +61,10 @@ * - jump to second stage */ -_TEXT_BASE: - .word TEXT_BASE -.globl _armboot_start -_armboot_start: - .word _start +_textBase: + .word TEXT_BASE -/* - * These are defined in the board-specific linker script. - */ -.globl _bss_start -_bss_start: - .word __bss_start - -.globl _bss_end -_bss_end: - .word _end #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ @@ -111,47 +98,9 @@ #ifdef CONFIG_INIT_CRITICAL bl cpu_init_crit /* we do sys-critical inits */ #endif + b HeadStart -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end addreee [r2] */ - ble copy_loop - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CFG_MALLOC_LEN /* malloc area */ - sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - bne clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot /****************************************************************************/ @@ -167,16 +116,7 @@ IC_BASE: .word 0x40d00000 #define ICMR 0x04 -/* Reset-Controller */ -RST_BASE: .word 0x40f00030 -#define RCSR 0x00 - -/* Operating System Timer */ -OSTIMER_BASE: .word 0x40a00000 -#define OSMR3 0x0C -#define OSCR 0x10 -#define OWER 0x18 -#define OIER 0x1C + /* Clock Manager Registers */ #ifdef CFG_CPUSPEED @@ -288,7 +228,7 @@ stmia sp, {r0 - r12} /* Calling r0-r12 */ add r8, sp, #S_PC - ldr r2, _armboot_start + ldr r2, _textBase sub r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN) sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */ @@ -325,7 +265,7 @@ .endm .macro get_bad_stack - ldr r13, _armboot_start @ setup our mode stack + ldr r13, _textBase @ setup our mode stack sub r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN) sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack @@ -416,36 +356,3 @@ #endif -/****************************************************************************/ -/* */ -/* Reset function: the PXA250 doesn't have a reset function, so we have to */ -/* perform a watchdog timeout for a soft reset. */ -/* */ -/****************************************************************************/ - - .align 5 -.globl reset_cpu - - /* FIXME: this code is PXA250 specific. How is this handled on */ - /* other XScale processors? */ - -reset_cpu: - - /* We set OWE:WME (watchdog enable) and wait until timeout happens */ - - ldr r0, OSTIMER_BASE - ldr r1, [r0, #OWER] - orr r1, r1, #0x0001 /* bit0: WME */ - str r1, [r0, #OWER] - - /* OS timer does only wrap every 1165 seconds, so we have to set */ - /* the match register as well. */ - - ldr r1, [r0, #OSCR] /* read OS timer */ - add r1, r1, #0x800 /* let OSMR3 match after */ - add r1, r1, #0x800 /* 4096*(1/3.6864MHz)=1ms */ - str r1, [r0, #OSMR3] - -reset_endless: - - b reset_endless diff -u -r --new-file u-boot-1.1.2/cpu/pxa/usb_ohci.c u-boot-1.1.2-neon/cpu/pxa/usb_ohci.c --- u-boot-1.1.2/cpu/pxa/usb_ohci.c 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/cpu/pxa/usb_ohci.c 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,1679 @@ +/* + * URB OHCI HCD (Host Controller Driver) for USB on the S3C2400. + * + * (C) Copyright 2003 + * Gary Jennejohn, DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Note: Part of this code has been derived from linux + * + */ +/* + * IMPORTANT NOTES + * 1 - you MUST define LITTLEENDIAN in the configuration file for the + * board or this driver will NOT work! + * 2 - this driver is intended for use with USB Mass Storage Devices + * (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes! + */ + +#include +/* #include no PCI on the S3C24X0 */ + +#ifdef CONFIG_USB_OHCI + +#include + +#include +#include +#include "usb_ohci.h" + +#if defined( CONFIG_SM501 ) +#include "sm501_usb.h" +#endif + +// #define OHCI_USE_NPS /* force NoPowerSwitching mode */ +// #define OHCI_VERBOSE_DEBUG /* not always helpful */ + + +/* For initializing controller (mask in an HCFS mode too) */ +#define OHCI_CONTROL_INIT \ + (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE + +#define readl(a) (*((vu_long *)(a))) +#define writel(a, b) (*((vu_long *)(b)) = ((vu_long)a)) + +#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; }) + +//#define DEBUG +#ifdef DEBUG +#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg) +#else +#define dbg(format, arg...) do {} while(0) +#endif /* DEBUG */ +#define err(format, arg...) printf("ERROR: " format "\n", ## arg) +#define SHOW_INFO +#ifdef SHOW_INFO +#define info(format, arg...) printf("INFO: " format "\n", ## arg) +#else +#define info(format, arg...) do {} while(0) +#endif + +#define m16_swap(x) swap_16(x) +#define m32_swap(x) swap_32(x) + +/* global ohci_t */ +static ohci_t gohci; +/* this must be aligned to a 256 byte boundary */ +struct ohci_hcca ghcca[1]; +/* a pointer to the aligned storage */ +struct ohci_hcca *phcca; +/* this allocates EDs for all possible endpoints */ +struct ohci_device ohci_dev; +/* urb_priv */ +urb_priv_t urb_priv; +/* RHSC flag */ +int got_rhsc; +/* device which was disconnected */ +struct usb_device *devgone; + +/*-------------------------------------------------------------------------*/ + +/* AMD-756 (D2 rev) reports corrupt register contents in some cases. + * The erratum (#4) description is incorrect. AMD's workaround waits + * till some bits (mostly reserved) are clear; ok for all revs. + */ +#define OHCI_QUIRK_AMD756 0xabcd +#define read_roothub(hc, register, mask) ({ \ + u32 temp = readl (&hc->regs->roothub.register); \ + if (hc->flags & OHCI_QUIRK_AMD756) \ + while (temp & mask) \ + temp = readl (&hc->regs->roothub.register); \ + temp; }) + +static u32 roothub_a (struct ohci *hc) + { return read_roothub (hc, a, 0xfc0fe000); } +static inline u32 roothub_b (struct ohci *hc) + { return readl (&hc->regs->roothub.b); } +static inline u32 roothub_status (struct ohci *hc) + { return readl (&hc->regs->roothub.status); } +static u32 roothub_portstatus (struct ohci *hc, int i) + { return read_roothub (hc, portstatus [i], 0xffe0fce0); } + + +/* forward declaration */ +static int hc_interrupt (void); +static void +td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer, + int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval); + +/*-------------------------------------------------------------------------* + * URB support functions + *-------------------------------------------------------------------------*/ + +/* free HCD-private data associated with this URB */ + +static void urb_free_priv (urb_priv_t * urb) +{ + int i; + int last; + struct td * td; + + last = urb->length - 1; + if (last >= 0) { + for (i = 0; i <= last; i++) { + td = urb->td[i]; + if (td) { + td->usb_dev = NULL; + urb->td[i] = NULL; + } + } + } +} + +/*-------------------------------------------------------------------------*/ + +#ifdef DEBUG +static int sohci_get_current_frame_number (struct usb_device * dev); + +/* debug| print the main components of an URB + * small: 0) header + data packets 1) just header */ + +static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer, + int transfer_len, struct devrequest * setup, char * str, int small) +{ + urb_priv_t * purb = &urb_priv; + + dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx", + str, + sohci_get_current_frame_number (dev), + usb_pipedevice (pipe), + usb_pipeendpoint (pipe), + usb_pipeout (pipe)? 'O': 'I', + usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"): + (usb_pipecontrol (pipe)? "CTRL": "BULK"), + purb->actual_length, + transfer_len, dev->status); +#ifdef OHCI_VERBOSE_DEBUG + if (!small) { + int i, len; + + if (usb_pipecontrol (pipe)) { + printf (__FILE__ ": cmd(8):"); + for (i = 0; i < 8 ; i++) + printf (" %02x", ((__u8 *) setup) [i]); + printf ("\n"); + } + if (transfer_len > 0 && buffer) { + printf (__FILE__ ": data(%d/%d):", + purb->actual_length, + transfer_len); + len = usb_pipeout (pipe)? + transfer_len: purb->actual_length; + for (i = 0; i < 16 && i < len; i++) + printf (" %02x", ((__u8 *) buffer) [i]); + printf ("%s\n", i < len? "...": ""); + } + } +#endif +} + +/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/ +void ep_print_int_eds (ohci_t *ohci, char * str) { + int i, j; + __u32 * ed_p; + for (i= 0; i < 32; i++) { + j = 5; + ed_p = &(ohci->hcca->int_table [i]); + if (*ed_p == 0) + continue; + printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i); + while (*ed_p != 0 && j--) { + ed_t *ed = (ed_t *)m32_swap(ed_p); + printf (" ed: %4x;", ed->hwINFO); + ed_p = &ed->hwNextED; + } + printf ("\n"); + } +} + +static void ohci_dump_intr_mask (char *label, __u32 mask) +{ + dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s", + label, + mask, + (mask & OHCI_INTR_MIE) ? " MIE" : "", + (mask & OHCI_INTR_OC) ? " OC" : "", + (mask & OHCI_INTR_RHSC) ? " RHSC" : "", + (mask & OHCI_INTR_FNO) ? " FNO" : "", + (mask & OHCI_INTR_UE) ? " UE" : "", + (mask & OHCI_INTR_RD) ? " RD" : "", + (mask & OHCI_INTR_SF) ? " SF" : "", + (mask & OHCI_INTR_WDH) ? " WDH" : "", + (mask & OHCI_INTR_SO) ? " SO" : "" + ); +} + +static void maybe_print_eds (char *label, __u32 value) +{ + ed_t *edp = (ed_t *)value; + + if (value) { + dbg ("%s %08x", label, value); + dbg ("%08x", edp->hwINFO); + dbg ("%08x", edp->hwTailP); + dbg ("%08x", edp->hwHeadP); + dbg ("%08x", edp->hwNextED); + } +} + +static char * hcfs2string (int state) +{ + switch (state) { + case OHCI_USB_RESET: return "reset"; + case OHCI_USB_RESUME: return "resume"; + case OHCI_USB_OPER: return "operational"; + case OHCI_USB_SUSPEND: return "suspend"; + } + return "?"; +} + +/* dump control and status registers */ +static void ohci_dump_status (ohci_t *controller) +{ + struct ohci_regs *regs = controller->regs; + __u32 temp; + + temp = readl (®s->revision) & 0xff; + if (temp != 0x10) + dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f)); + + temp = readl (®s->control); + dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp, + (temp & OHCI_CTRL_RWE) ? " RWE" : "", + (temp & OHCI_CTRL_RWC) ? " RWC" : "", + (temp & OHCI_CTRL_IR) ? " IR" : "", + hcfs2string (temp & OHCI_CTRL_HCFS), + (temp & OHCI_CTRL_BLE) ? " BLE" : "", + (temp & OHCI_CTRL_CLE) ? " CLE" : "", + (temp & OHCI_CTRL_IE) ? " IE" : "", + (temp & OHCI_CTRL_PLE) ? " PLE" : "", + temp & OHCI_CTRL_CBSR + ); + + temp = readl (®s->cmdstatus); + dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp, + (temp & OHCI_SOC) >> 16, + (temp & OHCI_OCR) ? " OCR" : "", + (temp & OHCI_BLF) ? " BLF" : "", + (temp & OHCI_CLF) ? " CLF" : "", + (temp & OHCI_HCR) ? " HCR" : "" + ); + + ohci_dump_intr_mask ("intrstatus", readl (®s->intrstatus)); + ohci_dump_intr_mask ("intrenable", readl (®s->intrenable)); + + maybe_print_eds ("ed_periodcurrent", readl (®s->ed_periodcurrent)); + + maybe_print_eds ("ed_controlhead", readl (®s->ed_controlhead)); + maybe_print_eds ("ed_controlcurrent", readl (®s->ed_controlcurrent)); + + maybe_print_eds ("ed_bulkhead", readl (®s->ed_bulkhead)); + maybe_print_eds ("ed_bulkcurrent", readl (®s->ed_bulkcurrent)); + + maybe_print_eds ("donehead", readl (®s->donehead)); +} + +static void ohci_dump_roothub (ohci_t *controller, int verbose) +{ + __u32 temp, ndp, i; + + temp = roothub_a (controller); + ndp = (temp & RH_A_NDP); + + if (verbose) { + dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp, + ((temp & RH_A_POTPGT) >> 24) & 0xff, + (temp & RH_A_NOCP) ? " NOCP" : "", + (temp & RH_A_OCPM) ? " OCPM" : "", + (temp & RH_A_DT) ? " DT" : "", + (temp & RH_A_NPS) ? " NPS" : "", + (temp & RH_A_PSM) ? " PSM" : "", + ndp + ); + temp = roothub_b (controller); + dbg ("roothub.b: %08x PPCM=%04x DR=%04x", + temp, + (temp & RH_B_PPCM) >> 16, + (temp & RH_B_DR) + ); + temp = roothub_status (controller); + dbg ("roothub.status: %08x%s%s%s%s%s%s", + temp, + (temp & RH_HS_CRWE) ? " CRWE" : "", + (temp & RH_HS_OCIC) ? " OCIC" : "", + (temp & RH_HS_LPSC) ? " LPSC" : "", + (temp & RH_HS_DRWE) ? " DRWE" : "", + (temp & RH_HS_OCI) ? " OCI" : "", + (temp & RH_HS_LPS) ? " LPS" : "" + ); + } + + for (i = 0; i < ndp; i++) { + temp = roothub_portstatus (controller, i); + dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s", + i, + temp, + (temp & RH_PS_PRSC) ? " PRSC" : "", + (temp & RH_PS_OCIC) ? " OCIC" : "", + (temp & RH_PS_PSSC) ? " PSSC" : "", + (temp & RH_PS_PESC) ? " PESC" : "", + (temp & RH_PS_CSC) ? " CSC" : "", + + (temp & RH_PS_LSDA) ? " LSDA" : "", + (temp & RH_PS_PPS) ? " PPS" : "", + (temp & RH_PS_PRS) ? " PRS" : "", + (temp & RH_PS_POCI) ? " POCI" : "", + (temp & RH_PS_PSS) ? " PSS" : "", + + (temp & RH_PS_PES) ? " PES" : "", + (temp & RH_PS_CCS) ? " CCS" : "" + ); + } +} + +static void ohci_dump (ohci_t *controller, int verbose) +{ + dbg ("OHCI controller usb-%s state", controller->slot_name); + + /* dumps some of the state we know about */ + ohci_dump_status (controller); + if (verbose) + ep_print_int_eds (controller, "hcca"); + dbg ("hcca frame #%04x", controller->hcca->frame_no); + ohci_dump_roothub (controller, 1); +} + + +#endif /* DEBUG */ + +/*-------------------------------------------------------------------------* + * Interface functions (URB) + *-------------------------------------------------------------------------*/ + +/* get a transfer request */ + +int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len, struct devrequest *setup, int interval) +{ + ohci_t *ohci; + ed_t * ed; + urb_priv_t *purb_priv; + int i, size = 0; + + ohci = &gohci; + + /* when controller's hung, permit only roothub cleanup attempts + * such as powering down ports */ + if (ohci->disabled) { + err("sohci_submit_job: EPIPE"); + return -1; + } + + /* every endpoint has a ed, locate and fill it */ + if (!(ed = ep_add_ed (dev, pipe))) { + err("sohci_submit_job: ENOMEM"); + return -1; + } + + /* for the private part of the URB we need the number of TDs (size) */ + switch (usb_pipetype (pipe)) { + case PIPE_BULK: /* one TD for every 4096 Byte */ + size = (transfer_len - 1) / 4096 + 1; + break; + case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */ + size = (transfer_len == 0)? 2: + (transfer_len - 1) / 4096 + 3; + break; + } + + if (size >= (N_URB_TD - 1)) { + err("need %d TDs, only have %d", size, N_URB_TD); + return -1; + } + purb_priv = &urb_priv; + purb_priv->pipe = pipe; + + /* fill the private part of the URB */ + purb_priv->length = size; + purb_priv->ed = ed; + purb_priv->actual_length = 0; + + /* allocate the TDs */ + /* note that td[0] was allocated in ep_add_ed */ + for (i = 0; i < size; i++) { + purb_priv->td[i] = td_alloc (dev); + if (!purb_priv->td[i]) { + purb_priv->length = i; + urb_free_priv (purb_priv); + err("sohci_submit_job: ENOMEM"); + return -1; + } + } + + if (ed->state == ED_NEW || (ed->state & ED_DEL)) { + urb_free_priv (purb_priv); + err("sohci_submit_job: EINVAL"); + return -1; + } + + /* link the ed into a chain if is not already */ + if (ed->state != ED_OPER) + ep_link (ohci, ed); + + /* fill the TDs and link it to the ed */ + td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef DEBUG +/* tell us the current USB frame number */ + +static int sohci_get_current_frame_number (struct usb_device *usb_dev) +{ + ohci_t *ohci = &gohci; + + return m16_swap (ohci->hcca->frame_no); +} +#endif + +/*-------------------------------------------------------------------------* + * ED handling functions + *-------------------------------------------------------------------------*/ + +/* link an ed into one of the HC chains */ + +static int ep_link (ohci_t *ohci, ed_t *edi) +{ + volatile ed_t *ed = edi; + + ed->state = ED_OPER; + + switch (ed->type) { + case PIPE_CONTROL: + ed->hwNextED = 0; + if (ohci->ed_controltail == NULL) { + writel (ed, &ohci->regs->ed_controlhead); + } else { + ohci->ed_controltail->hwNextED = m32_swap (ed); + } + ed->ed_prev = ohci->ed_controltail; + if (!ohci->ed_controltail && !ohci->ed_rm_list[0] && + !ohci->ed_rm_list[1] && !ohci->sleeping) { + ohci->hc_control |= OHCI_CTRL_CLE; + writel (ohci->hc_control, &ohci->regs->control); + } + ohci->ed_controltail = edi; + break; + + case PIPE_BULK: + ed->hwNextED = 0; + if (ohci->ed_bulktail == NULL) { + writel (ed, &ohci->regs->ed_bulkhead); + } else { + ohci->ed_bulktail->hwNextED = m32_swap (ed); + } + ed->ed_prev = ohci->ed_bulktail; + if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] && + !ohci->ed_rm_list[1] && !ohci->sleeping) { + ohci->hc_control |= OHCI_CTRL_BLE; + writel (ohci->hc_control, &ohci->regs->control); + } + ohci->ed_bulktail = edi; + break; + } + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* unlink an ed from one of the HC chains. + * just the link to the ed is unlinked. + * the link from the ed still points to another operational ed or 0 + * so the HC can eventually finish the processing of the unlinked ed */ + +static int ep_unlink (ohci_t *ohci, ed_t *ed) +{ + ed->hwINFO |= m32_swap (OHCI_ED_SKIP); + + switch (ed->type) { + case PIPE_CONTROL: + if (ed->ed_prev == NULL) { + if (!ed->hwNextED) { + ohci->hc_control &= ~OHCI_CTRL_CLE; + writel (ohci->hc_control, &ohci->regs->control); + } + writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead); + } else { + ed->ed_prev->hwNextED = ed->hwNextED; + } + if (ohci->ed_controltail == ed) { + ohci->ed_controltail = ed->ed_prev; + } else { + ((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev; + } + break; + + case PIPE_BULK: + if (ed->ed_prev == NULL) { + if (!ed->hwNextED) { + ohci->hc_control &= ~OHCI_CTRL_BLE; + writel (ohci->hc_control, &ohci->regs->control); + } + writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead); + } else { + ed->ed_prev->hwNextED = ed->hwNextED; + } + if (ohci->ed_bulktail == ed) { + ohci->ed_bulktail = ed->ed_prev; + } else { + ((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev; + } + break; + } + ed->state = ED_UNLINK; + return 0; +} + + +/*-------------------------------------------------------------------------*/ + +/* add/reinit an endpoint; this should be done once at the usb_set_configuration command, + * but the USB stack is a little bit stateless so we do it at every transaction + * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK + * in all other cases the state is left unchanged + * the ed info fields are setted anyway even though most of them should not change */ + +static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe) +{ + td_t *td; + ed_t *ed_ret; + volatile ed_t *ed; + + ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) | + (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))]; + + if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) { + err("ep_add_ed: pending delete"); + /* pending delete request */ + return NULL; + } + + if (ed->state == ED_NEW) { + ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */ + /* dummy td; end of td list for ed */ + td = td_alloc (usb_dev); + ed->hwTailP = m32_swap (td); + ed->hwHeadP = ed->hwTailP; + ed->state = ED_UNLINK; + ed->type = usb_pipetype (pipe); + ohci_dev.ed_cnt++; + } + + ed->hwINFO = m32_swap (usb_pipedevice (pipe) + | usb_pipeendpoint (pipe) << 7 + | (usb_pipeisoc (pipe)? 0x8000: 0) + | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000)) + | usb_pipeslow (pipe) << 13 + | usb_maxpacket (usb_dev, pipe) << 16); + + return ed_ret; +} + +/*-------------------------------------------------------------------------* + * TD handling functions + *-------------------------------------------------------------------------*/ + +/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */ + +static void td_fill (ohci_t *ohci, unsigned int info, + void *data, int len, + struct usb_device *dev, int index, urb_priv_t *urb_priv) +{ + volatile td_t *td, *td_pt; +#ifdef OHCI_FILL_TRACE + int i; +#endif + + if (index > urb_priv->length) { + err("index > length"); + return; + } + /* use this td as the next dummy */ + td_pt = urb_priv->td [index]; + td_pt->hwNextTD = 0; + + /* fill the old dummy TD */ + td = urb_priv->td [index] = (td_t *)(m32_swap (urb_priv->ed->hwTailP) & ~0xf); + + td->ed = urb_priv->ed; + td->next_dl_td = NULL; + td->index = index; + td->data = (__u32)data; +#ifdef OHCI_FILL_TRACE + if ((usb_pipetype(urb_priv->pipe) == PIPE_BULK) && usb_pipeout(urb_priv->pipe)) { + for (i = 0; i < len; i++) + printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]); + printf("\n"); + } +#endif + if (!len) + data = 0; + + td->hwINFO = m32_swap (info); + td->hwCBP = m32_swap (data); + if (data) + td->hwBE = m32_swap (data + len - 1); + else + td->hwBE = 0; + td->hwNextTD = m32_swap (td_pt); + td->hwPSW [0] = m16_swap (((__u32)data & 0x0FFF) | 0xE000); + + /* append to queue */ + td->ed->hwTailP = td->hwNextTD; +} + +/*-------------------------------------------------------------------------*/ + +/* prepare all TDs of a transfer */ + +static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval) +{ + ohci_t *ohci = &gohci; + int data_len = transfer_len; + void *data; + int cnt = 0; + __u32 info = 0; + unsigned int toggle = 0; + + /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */ + if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) { + toggle = TD_T_TOGGLE; + } else { + toggle = TD_T_DATA0; + usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1); + } + urb->td_cnt = 0; + if (data_len) + data = buffer; + else + data = 0; + + switch (usb_pipetype (pipe)) { + case PIPE_BULK: + info = usb_pipeout (pipe)? + TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ; + while(data_len > 4096) { + td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb); + data += 4096; data_len -= 4096; cnt++; + } + info = usb_pipeout (pipe)? + TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ; + td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb); + cnt++; + + if (!ohci->sleeping) + writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */ + break; + + case PIPE_CONTROL: + info = TD_CC | TD_DP_SETUP | TD_T_DATA0; + td_fill (ohci, info, setup, 8, dev, cnt++, urb); + if (data_len > 0) { + info = usb_pipeout (pipe)? + TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1; + /* NOTE: mishandles transfers >8K, some >4K */ + td_fill (ohci, info, data, data_len, dev, cnt++, urb); + } + info = usb_pipeout (pipe)? + TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1; + td_fill (ohci, info, data, 0, dev, cnt++, urb); + if (!ohci->sleeping) + writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */ + break; + } + if (urb->length != cnt) + dbg("TD LENGTH %d != CNT %d", urb->length, cnt); +} + +/*-------------------------------------------------------------------------* + * Done List handling functions + *-------------------------------------------------------------------------*/ + + +/* calculate the transfer length and update the urb */ + +static void dl_transfer_length(td_t * td) +{ + __u32 tdINFO, tdBE, tdCBP; + urb_priv_t *lurb_priv = &urb_priv; + + tdINFO = m32_swap (td->hwINFO); + tdBE = m32_swap (td->hwBE); + tdCBP = m32_swap (td->hwCBP); + + + if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL && + ((td->index == 0) || (td->index == lurb_priv->length - 1)))) { + if (tdBE != 0) { + if (td->hwCBP == 0) + lurb_priv->actual_length += tdBE - td->data + 1; + else + lurb_priv->actual_length += tdCBP - td->data; + } + } +} + +/*-------------------------------------------------------------------------*/ + +/* replies to the request have to be on a FIFO basis so + * we reverse the reversed done-list */ + +static td_t * dl_reverse_done_list (ohci_t *ohci) +{ + __u32 td_list_hc; + td_t *td_rev = NULL; + td_t *td_list = NULL; + urb_priv_t *lurb_priv = NULL; + + td_list_hc = m32_swap (ohci->hcca->done_head) & 0xfffffff0; + ohci->hcca->done_head = 0; + + while (td_list_hc) { + td_list = (td_t *)td_list_hc; + + if (TD_CC_GET (m32_swap (td_list->hwINFO))) { + lurb_priv = &urb_priv; + dbg(" USB-error/status: %x : %p", + TD_CC_GET (m32_swap (td_list->hwINFO)), td_list); + if (td_list->ed->hwHeadP & m32_swap (0x1)) { + if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) { + td_list->ed->hwHeadP = + (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & m32_swap (0xfffffff0)) | + (td_list->ed->hwHeadP & m32_swap (0x2)); + lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1; + } else + td_list->ed->hwHeadP &= m32_swap (0xfffffff2); + } + } + + td_list->next_dl_td = td_rev; + td_rev = td_list; + td_list_hc = m32_swap (td_list->hwNextTD) & 0xfffffff0; + } + return td_list; +} + +/*-------------------------------------------------------------------------*/ + +/* td done list */ +static int dl_done_list (ohci_t *ohci, td_t *td_list) +{ + td_t *td_list_next = NULL; + ed_t *ed; + int cc = 0; + int stat = 0; + /* urb_t *urb; */ + urb_priv_t *lurb_priv; + __u32 tdINFO, edHeadP, edTailP; + + while (td_list) { + td_list_next = td_list->next_dl_td; + + lurb_priv = &urb_priv; + tdINFO = m32_swap (td_list->hwINFO); + + ed = td_list->ed; + + dl_transfer_length(td_list); + + /* error code of transfer */ + cc = TD_CC_GET (tdINFO); + if (cc != 0) { + dbg("ConditionCode %#x", cc); + stat = cc_to_error[cc]; + } + + if (ed->state != ED_NEW) { + edHeadP = m32_swap (ed->hwHeadP) & 0xfffffff0; + edTailP = m32_swap (ed->hwTailP); + + /* unlink eds if they are not busy */ + if ((edHeadP == edTailP) && (ed->state == ED_OPER)) + ep_unlink (ohci, ed); + } + + td_list = td_list_next; + } + return stat; +} + +/*-------------------------------------------------------------------------* + * Virtual Root Hub + *-------------------------------------------------------------------------*/ + +/* Device descriptor */ +static __u8 root_hub_dev_des[] = +{ + 0x12, /* __u8 bLength; */ + 0x01, /* __u8 bDescriptorType; Device */ + 0x10, /* __u16 bcdUSB; v1.1 */ + 0x01, + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x00, /* __u8 bDeviceProtocol; */ + 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ + 0x00, /* __u16 idVendor; */ + 0x00, + 0x00, /* __u16 idProduct; */ + 0x00, + 0x00, /* __u16 bcdDevice; */ + 0x00, + 0x00, /* __u8 iManufacturer; */ + 0x01, /* __u8 iProduct; */ + 0x00, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; + + +/* Configuration descriptor */ +static __u8 root_hub_config_des[] = +{ + 0x09, /* __u8 bLength; */ + 0x02, /* __u8 bDescriptorType; Configuration */ + 0x19, /* __u16 wTotalLength; */ + 0x00, + 0x01, /* __u8 bNumInterfaces; */ + 0x01, /* __u8 bConfigurationValue; */ + 0x00, /* __u8 iConfiguration; */ + 0x40, /* __u8 bmAttributes; + Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */ + 0x00, /* __u8 MaxPower; */ + + /* interface */ + 0x09, /* __u8 if_bLength; */ + 0x04, /* __u8 if_bDescriptorType; Interface */ + 0x00, /* __u8 if_bInterfaceNumber; */ + 0x00, /* __u8 if_bAlternateSetting; */ + 0x01, /* __u8 if_bNumEndpoints; */ + 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ + 0x00, /* __u8 if_bInterfaceSubClass; */ + 0x00, /* __u8 if_bInterfaceProtocol; */ + 0x00, /* __u8 if_iInterface; */ + + /* endpoint */ + 0x07, /* __u8 ep_bLength; */ + 0x05, /* __u8 ep_bDescriptorType; Endpoint */ + 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */ + 0x00, + 0xff /* __u8 ep_bInterval; 255 ms */ +}; + +static unsigned char root_hub_str_index0[] = +{ + 0x04, /* __u8 bLength; */ + 0x03, /* __u8 bDescriptorType; String-descriptor */ + 0x09, /* __u8 lang ID */ + 0x04, /* __u8 lang ID */ +}; + +static unsigned char root_hub_str_index1[] = +{ + 28, /* __u8 bLength; */ + 0x03, /* __u8 bDescriptorType; String-descriptor */ + 'O', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'H', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'C', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'I', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + ' ', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'R', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'o', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'o', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 't', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + ' ', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'H', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'u', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'b', /* __u8 Unicode */ + 0, /* __u8 Unicode */ +}; + +/* Hub class-specific descriptor is constructed dynamically */ + + +/*-------------------------------------------------------------------------*/ + +#define OK(x) len = (x); break +#ifdef DEBUG +#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);} +#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);} +#else +#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status) +#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1]) +#endif +#define RD_RH_STAT roothub_status(&gohci) +#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1) + +/* request to virtual root hub */ + +int rh_check_port_status(ohci_t *controller) +{ + __u32 temp, ndp, i; + int res; + + res = -1; + temp = roothub_a (controller); + ndp = (temp & RH_A_NDP); + for (i = 0; i < ndp; i++) { + temp = roothub_portstatus (controller, i); + /* check for a device disconnect */ + if (((temp & (RH_PS_PESC | RH_PS_CSC)) == + (RH_PS_PESC | RH_PS_CSC)) && + ((temp & RH_PS_CCS) == 0)) { + res = i; + break; + } + } + return res; +} + +static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, + void *buffer, int transfer_len, struct devrequest *cmd) +{ + void * data = buffer; + int leni = transfer_len; + int len = 0; + int stat = 0; + __u32 datab[4]; + __u8 *data_buf = (__u8 *)datab; + __u16 bmRType_bReq; + __u16 wValue; + __u16 wIndex; + __u16 wLength; + +#ifdef DEBUG +urb_priv.actual_length = 0; +pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe)); +#else + wait_ms(1); +#endif + if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) { + info("Root-Hub submit IRQ: NOT implemented"); + return 0; + } + + bmRType_bReq = cmd->requesttype | (cmd->request << 8); + wValue = m16_swap (cmd->value); + wIndex = m16_swap (cmd->index); + wLength = m16_swap (cmd->length); + + info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x", + dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength); + + switch (bmRType_bReq) { + /* Request Destination: + without flags: Device, + RH_INTERFACE: interface, + RH_ENDPOINT: endpoint, + RH_CLASS means HUB here, + RH_OTHER | RH_CLASS almost ever means HUB_PORT here + */ + + case RH_GET_STATUS: + *(__u16 *) data_buf = m16_swap (1); OK (2); + case RH_GET_STATUS | RH_INTERFACE: + *(__u16 *) data_buf = m16_swap (0); OK (2); + case RH_GET_STATUS | RH_ENDPOINT: + *(__u16 *) data_buf = m16_swap (0); OK (2); + case RH_GET_STATUS | RH_CLASS: + *(__u32 *) data_buf = m32_swap ( + RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE)); + OK (4); + case RH_GET_STATUS | RH_OTHER | RH_CLASS: + *(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4); + + case RH_CLEAR_FEATURE | RH_ENDPOINT: + switch (wValue) { + case (RH_ENDPOINT_STALL): OK (0); + } + break; + + case RH_CLEAR_FEATURE | RH_CLASS: + switch (wValue) { + case RH_C_HUB_LOCAL_POWER: + OK(0); + case (RH_C_HUB_OVER_CURRENT): + WR_RH_STAT(RH_HS_OCIC); OK (0); + } + break; + + case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: + switch (wValue) { + case (RH_PORT_ENABLE): + WR_RH_PORTSTAT (RH_PS_CCS ); OK (0); + case (RH_PORT_SUSPEND): + WR_RH_PORTSTAT (RH_PS_POCI); OK (0); + case (RH_PORT_POWER): + WR_RH_PORTSTAT (RH_PS_LSDA); OK (0); + case (RH_C_PORT_CONNECTION): + WR_RH_PORTSTAT (RH_PS_CSC ); OK (0); + case (RH_C_PORT_ENABLE): + WR_RH_PORTSTAT (RH_PS_PESC); OK (0); + case (RH_C_PORT_SUSPEND): + WR_RH_PORTSTAT (RH_PS_PSSC); OK (0); + case (RH_C_PORT_OVER_CURRENT): + WR_RH_PORTSTAT (RH_PS_OCIC); OK (0); + case (RH_C_PORT_RESET): + WR_RH_PORTSTAT (RH_PS_PRSC); OK (0); + } + break; + + case RH_SET_FEATURE | RH_OTHER | RH_CLASS: + switch (wValue) { + case (RH_PORT_SUSPEND): + WR_RH_PORTSTAT (RH_PS_PSS ); OK (0); + case (RH_PORT_RESET): /* BUG IN HUP CODE *********/ + if (RD_RH_PORTSTAT & RH_PS_CCS) + WR_RH_PORTSTAT (RH_PS_PRS); + OK (0); + case (RH_PORT_POWER): + WR_RH_PORTSTAT (RH_PS_PPS ); OK (0); + case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/ + if (RD_RH_PORTSTAT & RH_PS_CCS) + WR_RH_PORTSTAT (RH_PS_PES ); + OK (0); + } + break; + + case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0); + + case RH_GET_DESCRIPTOR: + switch ((wValue & 0xff00) >> 8) { + case (0x01): /* device descriptor */ + len = min_t(unsigned int, + leni, + min_t(unsigned int, + sizeof (root_hub_dev_des), + wLength)); + data_buf = root_hub_dev_des; OK(len); + case (0x02): /* configuration descriptor */ + len = min_t(unsigned int, + leni, + min_t(unsigned int, + sizeof (root_hub_config_des), + wLength)); + data_buf = root_hub_config_des; OK(len); + case (0x03): /* string descriptors */ + if(wValue==0x0300) { + len = min_t(unsigned int, + leni, + min_t(unsigned int, + sizeof (root_hub_str_index0), + wLength)); + data_buf = root_hub_str_index0; + OK(len); + } + if(wValue==0x0301) { + len = min_t(unsigned int, + leni, + min_t(unsigned int, + sizeof (root_hub_str_index1), + wLength)); + data_buf = root_hub_str_index1; + OK(len); + } + default: + stat = USB_ST_STALLED; + } + break; + + case RH_GET_DESCRIPTOR | RH_CLASS: + { + __u32 temp = roothub_a (&gohci); + + data_buf [0] = 9; /* min length; */ + data_buf [1] = 0x29; + data_buf [2] = temp & RH_A_NDP; + data_buf [3] = 0; + if (temp & RH_A_PSM) /* per-port power switching? */ + data_buf [3] |= 0x1; + if (temp & RH_A_NOCP) /* no overcurrent reporting? */ + data_buf [3] |= 0x10; + else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */ + data_buf [3] |= 0x8; + + /* corresponds to data_buf[4-7] */ + datab [1] = 0; + data_buf [5] = (temp & RH_A_POTPGT) >> 24; + temp = roothub_b (&gohci); + data_buf [7] = temp & RH_B_DR; + if (data_buf [2] < 7) { + data_buf [8] = 0xff; + } else { + data_buf [0] += 2; + data_buf [8] = (temp & RH_B_DR) >> 8; + data_buf [10] = data_buf [9] = 0xff; + } + + len = min_t(unsigned int, leni, + min_t(unsigned int, data_buf [0], wLength)); + OK (len); + } + + case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1); + + case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0); + + default: + dbg ("unsupported root hub command"); + stat = USB_ST_STALLED; + } + +#ifdef DEBUG + ohci_dump_roothub (&gohci, 1); +#else + wait_ms(1); +#endif + + len = min_t(int, len, leni); + if (data != data_buf) + memcpy (data, data_buf, len); + dev->act_len = len; + dev->status = stat; + +#ifdef DEBUG + if (transfer_len) + urb_priv.actual_length = transfer_len; + pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/); +#else + wait_ms(1); +#endif + + return stat; +} + +/*-------------------------------------------------------------------------*/ + +/* common code for handling submit messages - used for all but root hub */ +/* accesses. */ +int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len, struct devrequest *setup, int interval) +{ + int stat = 0; + int maxsize = usb_maxpacket(dev, pipe); + int timeout; + + /* device pulled? Shortcut the action. */ + if (devgone == dev) { + dev->status = USB_ST_CRC_ERR; + return 0; + } + +#ifdef DEBUG + urb_priv.actual_length = 0; + pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe)); +#else + wait_ms(1); +#endif + if (!maxsize) { + err("submit_common_message: pipesize for pipe %lx is zero", + pipe); + return -1; + } + + if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) { + err("sohci_submit_job failed"); + return -1; + } + + wait_ms(10); + /* ohci_dump_status(&gohci); */ + + /* allow more time for a BULK device to react - some are slow */ +#define BULK_TO 5000 /* timeout in milliseconds */ + if (usb_pipetype (pipe) == PIPE_BULK) + timeout = BULK_TO; + else + timeout = 100; + + /* wait for it to complete */ + for (;;) { + /* check whether the controller is done */ + stat = hc_interrupt(); + if (stat < 0) { + stat = USB_ST_CRC_ERR; + break; + } + if (stat >= 0 && stat != 0xff) { + /* 0xff is returned for an SF-interrupt */ + break; + } + if (--timeout) { + wait_ms(1); + } else { + err("CTL:TIMEOUT "); + stat = USB_ST_CRC_ERR; + break; + } + } + /* we got an Root Hub Status Change interrupt */ + if (got_rhsc) { +#ifdef DEBUG + ohci_dump_roothub (&gohci, 1); +#endif + got_rhsc = 0; + /* abuse timeout */ + timeout = rh_check_port_status(&gohci); + if (timeout >= 0) { +#if 0 /* this does nothing useful, but leave it here in case that changes */ + /* the called routine adds 1 to the passed value */ + usb_hub_port_connect_change(gohci.rh.dev, timeout - 1); +#endif + /* + * XXX + * This is potentially dangerous because it assumes + * that only one device is ever plugged in! + */ + devgone = dev; + } + } + + dev->status = stat; + dev->act_len = transfer_len; + +#ifdef DEBUG + pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe)); +#else + wait_ms(1); +#endif + + /* free TDs in urb_priv */ + urb_free_priv (&urb_priv); + return 0; +} + +/* submit routines called from usb.c */ +int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len) +{ + info("submit_bulk_msg"); + return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0); +} + +int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len, struct devrequest *setup) +{ + int maxsize = usb_maxpacket(dev, pipe); + + info("submit_control_msg"); +#ifdef DEBUG + urb_priv.actual_length = 0; + pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe)); +#else + wait_ms(1); +#endif + if (!maxsize) { + err("submit_control_message: pipesize for pipe %lx is zero", + pipe); + return -1; + } + if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) { + gohci.rh.dev = dev; + /* root hub - redirect */ + return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len, + setup); + } + + return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0); +} + +int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len, int interval) +{ + info("submit_int_msg"); + return -1; +} + +/*-------------------------------------------------------------------------* + * HC functions + *-------------------------------------------------------------------------*/ + +/* reset the HC and BUS */ + +static int hc_reset (ohci_t *ohci) +{ + int timeout = 30; + int smm_timeout = 50; /* 0,5 sec */ + + if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */ + writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */ + info("USB HC TakeOver from SMM"); + while (readl (&ohci->regs->control) & OHCI_CTRL_IR) { + wait_ms (10); + if (--smm_timeout == 0) { + err("USB HC TakeOver failed!"); + return -1; + } + } + } + + /* Disable HC interrupts */ + writel (OHCI_INTR_MIE, &ohci->regs->intrdisable); + + dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;", + ohci->slot_name, + readl (&ohci->regs->control)); + + /* Reset USB (needed by some controllers) */ + writel (0, &ohci->regs->control); + + /* HC Reset requires max 10 us delay */ + writel (OHCI_HCR, &ohci->regs->cmdstatus); + while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) { + if (--timeout == 0) { + err("USB HC reset timed out!"); + return -1; + } + udelay (1); + } + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* Start an OHCI controller, set the BUS operational + * enable interrupts + * connect the virtual root hub */ + +static int hc_start (ohci_t * ohci) +{ + __u32 mask; + unsigned int fminterval; + + ohci->disabled = 1; + + /* Tell the controller where the control and bulk lists are + * The lists are empty now. */ + + writel (0, &ohci->regs->ed_controlhead); + writel (0, &ohci->regs->ed_bulkhead); + + writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */ + + fminterval = 0x2edf; + writel ((fminterval * 9) / 10, &ohci->regs->periodicstart); + fminterval |= ((((fminterval - 210) * 6) / 7) << 16); + writel (fminterval, &ohci->regs->fminterval); + writel (0x628, &ohci->regs->lsthresh); + + /* start controller operations */ + ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER; + ohci->disabled = 0; + writel (ohci->hc_control, &ohci->regs->control); + + /* disable all interrupts */ + mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD | + OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC | + OHCI_INTR_OC | OHCI_INTR_MIE); + writel (mask, &ohci->regs->intrdisable); + /* clear all interrupts */ + mask &= ~OHCI_INTR_MIE; + writel (mask, &ohci->regs->intrstatus); + /* Choose the interrupts we care about now - but w/o MIE */ + mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO; + writel (mask, &ohci->regs->intrenable); + +#ifdef OHCI_USE_NPS + /* required for AMD-756 and some Mac platforms */ + writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM, + &ohci->regs->roothub.a); + writel (RH_HS_LPSC, &ohci->regs->roothub.status); +#endif /* OHCI_USE_NPS */ + +#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);}) + /* POTPGT delay is bits 24-31, in 2 ms units. */ + mdelay ((roothub_a (ohci) >> 23) & 0x1fe); + + /* connect the virtual root hub */ + ohci->rh.devnum = 0; + +printf( "---> Done with hc_start\n" ); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* an interrupt happens */ + +static int +hc_interrupt (void) +{ + ohci_t *ohci = &gohci; + struct ohci_regs *regs = ohci->regs; + int ints; + int stat = -1; + + if ((ohci->hcca->done_head != 0) && !(m32_swap (ohci->hcca->done_head) & 0x01)) { + ints = OHCI_INTR_WDH; + } else { + ints = readl (®s->intrstatus); + } + +dbg("Interrupt: %x frame: %x", ints, ohci->hcca->frame_no); + + if (ints & OHCI_INTR_RHSC) { +dbg("rhsc\n" ); + got_rhsc = 1; + } + + if (ints & OHCI_INTR_UE) { + ohci->disabled++; + err ("OHCI Unrecoverable Error, controller usb-%s disabled", + ohci->slot_name); + /* e.g. due to PCI Master/Target Abort */ + +#ifdef DEBUG + ohci_dump (ohci, 1); +#else + wait_ms(1); +#endif + /* FIXME: be optimistic, hope that bug won't repeat often. */ + /* Make some non-interrupt context restart the controller. */ + /* Count and limit the retries though; either hardware or */ + /* software errors can go forever... */ + hc_reset (ohci); + return -1; + } + + if (ints & OHCI_INTR_WDH) { + wait_ms(1); + writel (OHCI_INTR_WDH, ®s->intrdisable); + stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci)); + writel (OHCI_INTR_WDH, ®s->intrenable); +dbg("wdh: %x\n", stat ); + goto out ; + } + + if (ints & OHCI_INTR_SO) { + dbg("USB Schedule overrun\n"); + writel (OHCI_INTR_SO, ®s->intrenable); + stat = -1; + } + + /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */ + if (ints & OHCI_INTR_SF) { + unsigned int frame = m16_swap (ohci->hcca->frame_no) & 1; + wait_ms(1); + writel (OHCI_INTR_SF, ®s->intrdisable); + if (ohci->ed_rm_list[frame] != NULL) + writel (OHCI_INTR_SF, ®s->intrenable); + if( -1 == stat ) + stat = 0xff; +dbg("sf\n" ); + } + if( 0 == ints ) + stat = 0 ; +out: + writel (ints, ®s->intrstatus); + return stat; +} + +/*-------------------------------------------------------------------------*/ + +/*-------------------------------------------------------------------------*/ + +/* De-allocate all resources.. */ + +static void hc_release_ohci (ohci_t *ohci) +{ + dbg ("USB HC release ohci usb-%s", ohci->slot_name); + + if (!ohci->disabled) + hc_reset (ohci); +} + +/*-------------------------------------------------------------------------*/ + +/* + * low level initalisation routine, called from usb.c + */ +static char ohci_inited = 0; + +int usb_lowlevel_init(void) +{ +#ifdef FIXME + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + /* + * Set the 48 MHz UPLL clocking. Values are taken from + * "PLL value selection guide", 6-23, s3c2400_UM.pdf. + */ + clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2); + gpio->MISCCR |= 0x8; /* 1 = use pads related USB for USB host */ + /* + * Enable USB host clock. + */ + clk_power->CLKCON |= (1 << 4); +#endif +#ifdef CONFIG_PXA27X + /* + * Section 20.6.1 of PXA Developer's reference manual + */ + GPCR3 |= 0x80 ; // GP103 low + + UHCHR |= UHCHR_SSEP2|UHCHR_SSEP1 ; // Port 2 and 3 not supported + UHCHR &= ~(UHCHR_SSE|UHCHR_SSEP0); + +// UHCRHS &= ~UHCRHS_LPS ; +// UHCCOMS &= ~UHCCOMS_HCR ; // reset + CKEN |= CKEN10_USBHOST ; + udelay(10); + UHCHR &= ~(UHCHR_FHR|UHCHR_SSE); +#elif defined( CONFIG_SM501 ) + USB_GATE_MODE0 |= ENABLE_USBH ; + USB_GATE_MODE1 |= ENABLE_USBH ; +#endif + + memset (&gohci, 0, sizeof (ohci_t)); + memset (&urb_priv, 0, sizeof (urb_priv_t)); + + /* align the storage */ + if ((__u32)&ghcca[0] & 0xff) { + err("HCCA not aligned!!"); + return -1; + } + phcca = &ghcca[0]; + info("aligned ghcca %p", phcca); + memset(&ohci_dev, 0, sizeof(struct ohci_device)); + if ((__u32)&ohci_dev.ed[0] & 0x7) { + err("EDs not aligned!!"); + return -1; + } + memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1)); + if ((__u32)gtd & 0x7) { + err("TDs not aligned!!"); + return -1; + } + ptd = gtd; + gohci.hcca = phcca; + memset (phcca, 0, sizeof (struct ohci_hcca)); + + gohci.disabled = 1; + gohci.sleeping = 0; + gohci.irq = -1; + gohci.regs = (struct ohci_regs *)USBH_BASE ; + gohci.flags = 0; + gohci.slot_name = "s3c2400"; + + if (hc_reset (&gohci) < 0) { + err( "----> Error from hc_reset\n" ); + hc_release_ohci (&gohci); + /* Initialization failed */ +#ifdef FIXME + clk_power->CLKCON &= ~(1 << 4); +#endif +#ifdef CONFIG_PXA27X + CKEN &= ~CKEN10_USBHOST ; +#elif defined( CONFIG_SM501 ) +#endif + return -1; + } + + /* FIXME this is a second HC reset; why?? */ + writel (gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control); + wait_ms (10); + + if (hc_start (&gohci) < 0) { + err ("can't start usb-%s", gohci.slot_name); + hc_release_ohci (&gohci); + /* Initialization failed */ +#ifdef FIXME + clk_power->CLKCON &= ~(1 << 4); +#endif +#ifdef CONFIG_PXA27X + CKEN &= ~CKEN10_USBHOST ; +#elif defined( CONFIG_SM501 ) +#endif + return -1; + } + +#ifdef DEBUG + ohci_dump (&gohci, 1); +#else + wait_ms(1); +#endif +printf( "----> end of low_level_init()\n" ); + ohci_inited = 1; + return 0; +} + +int usb_lowlevel_stop(void) +{ + /* this gets called really early - before the controller has */ + /* even been initialized! */ + if (!ohci_inited) + return 0; + /* TODO release any interrupts, etc. */ + /* call hc_release_ohci() here ? */ + hc_reset (&gohci); + +#ifdef CONFIG_PXA27X + /* + * Section 20.7.4.4 of PXA Developer's reference manual + */ + UHCCOMS |= UHCCOMS_HCR ; // reset + udelay(10); + UHCRHS |= UHCRHS_LPS ; + UHCHR |= UHCHR_SSE ; + CKEN &= ~CKEN10_USBHOST ; +#elif defined( CONFIG_SM501 ) +#endif + + return 0; +} + +#endif /* CONFIG_USB_OHCI */ diff -u -r --new-file u-boot-1.1.2/cpu/pxa/usb_ohci.h u-boot-1.1.2-neon/cpu/pxa/usb_ohci.h --- u-boot-1.1.2/cpu/pxa/usb_ohci.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/cpu/pxa/usb_ohci.h 2007-08-11 21:07:20.000000000 +0200 @@ -0,0 +1,419 @@ +/* + * URB OHCI HCD (Host Controller Driver) for USB. + * + * (C) Copyright 1999 Roman Weissgaerber + * (C) Copyright 2000-2001 David Brownell + * + * usb-ohci.h + */ + + +static int cc_to_error[16] = { + +/* mapping of the OHCI CC status to error codes */ + /* No Error */ 0, + /* CRC Error */ USB_ST_CRC_ERR, + /* Bit Stuff */ USB_ST_BIT_ERR, + /* Data Togg */ USB_ST_CRC_ERR, + /* Stall */ USB_ST_STALLED, + /* DevNotResp */ -1, + /* PIDCheck */ USB_ST_BIT_ERR, + /* UnExpPID */ USB_ST_BIT_ERR, + /* DataOver */ USB_ST_BUF_ERR, + /* DataUnder */ USB_ST_BUF_ERR, + /* reservd */ -1, + /* reservd */ -1, + /* BufferOver */ USB_ST_BUF_ERR, + /* BuffUnder */ USB_ST_BUF_ERR, + /* Not Access */ -1, + /* Not Access */ -1 +}; + +/* ED States */ + +#define ED_NEW 0x00 +#define ED_UNLINK 0x01 +#define ED_OPER 0x02 +#define ED_DEL 0x04 +#define ED_URB_DEL 0x08 + +/* usb_ohci_ed */ +struct ed { + __u32 hwINFO; + __u32 hwTailP; + __u32 hwHeadP; + __u32 hwNextED; + + struct ed *ed_prev; + __u8 int_period; + __u8 int_branch; + __u8 int_load; + __u8 int_interval; + __u8 state; + __u8 type; + __u16 last_iso; + struct ed *ed_rm_list; + + struct usb_device *usb_dev; + __u32 unused[3]; +} __attribute((aligned(16))); +typedef struct ed ed_t; + + +/* TD info field */ +#define TD_CC 0xf0000000 +#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f) +#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28) +#define TD_EC 0x0C000000 +#define TD_T 0x03000000 +#define TD_T_DATA0 0x02000000 +#define TD_T_DATA1 0x03000000 +#define TD_T_TOGGLE 0x00000000 +#define TD_R 0x00040000 +#define TD_DI 0x00E00000 +#define TD_DI_SET(X) (((X) & 0x07)<< 21) +#define TD_DP 0x00180000 +#define TD_DP_SETUP 0x00000000 +#define TD_DP_IN 0x00100000 +#define TD_DP_OUT 0x00080000 + +#define TD_ISO 0x00010000 +#define TD_DEL 0x00020000 + +/* CC Codes */ +#define TD_CC_NOERROR 0x00 +#define TD_CC_CRC 0x01 +#define TD_CC_BITSTUFFING 0x02 +#define TD_CC_DATATOGGLEM 0x03 +#define TD_CC_STALL 0x04 +#define TD_DEVNOTRESP 0x05 +#define TD_PIDCHECKFAIL 0x06 +#define TD_UNEXPECTEDPID 0x07 +#define TD_DATAOVERRUN 0x08 +#define TD_DATAUNDERRUN 0x09 +#define TD_BUFFEROVERRUN 0x0C +#define TD_BUFFERUNDERRUN 0x0D +#define TD_NOTACCESSED 0x0F + + +#define MAXPSW 1 + +struct td { + __u32 hwINFO; + __u32 hwCBP; /* Current Buffer Pointer */ + __u32 hwNextTD; /* Next TD Pointer */ + __u32 hwBE; /* Memory Buffer End Pointer */ + + __u16 hwPSW[MAXPSW]; + __u8 unused; + __u8 index; + struct ed *ed; + struct td *next_dl_td; + struct usb_device *usb_dev; + int transfer_len; + __u32 data; + + __u32 unused2[2]; +} __attribute((aligned(32))); +typedef struct td td_t; + +#define OHCI_ED_SKIP (1 << 14) + +/* + * The HCCA (Host Controller Communications Area) is a 256 byte + * structure defined in the OHCI spec. that the host controller is + * told the base address of. It must be 256-byte aligned. + */ + +#define NUM_INTS 32 /* part of the OHCI standard */ +struct ohci_hcca { + __u32 int_table[NUM_INTS]; /* Interrupt ED table */ + __u16 frame_no; /* current frame number */ + __u16 pad1; /* set to 0 on each frame_no change */ + __u32 done_head; /* info returned for an interrupt */ + u8 reserved_for_hc[116]; +} __attribute((aligned(256))); + + +/* + * Maximum number of root hub ports. + */ +#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports */ + +/* + * This is the structure of the OHCI controller's memory mapped I/O + * region. This is Memory Mapped I/O. You must use the readl() and + * writel() macros defined in asm/io.h to access these!! + */ +struct ohci_regs { + /* control and status registers */ + __u32 revision; + __u32 control; + __u32 cmdstatus; + __u32 intrstatus; + __u32 intrenable; + __u32 intrdisable; + /* memory pointers */ + __u32 hcca; + __u32 ed_periodcurrent; + __u32 ed_controlhead; + __u32 ed_controlcurrent; + __u32 ed_bulkhead; + __u32 ed_bulkcurrent; + __u32 donehead; + /* frame counters */ + __u32 fminterval; + __u32 fmremaining; + __u32 fmnumber; + __u32 periodicstart; + __u32 lsthresh; + /* Root hub ports */ + struct ohci_roothub_regs { + __u32 a; + __u32 b; + __u32 status; + __u32 portstatus[MAX_ROOT_PORTS]; + } roothub; +} __attribute((aligned(32))); + + +/* OHCI CONTROL AND STATUS REGISTER MASKS */ + +/* + * HcControl (control) register masks + */ +#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */ +#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */ +#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */ +#define OHCI_CTRL_CLE (1 << 4) /* control list enable */ +#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */ +#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */ +#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ +#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ +#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */ + +/* pre-shifted values for HCFS */ +# define OHCI_USB_RESET (0 << 6) +# define OHCI_USB_RESUME (1 << 6) +# define OHCI_USB_OPER (2 << 6) +# define OHCI_USB_SUSPEND (3 << 6) + +/* + * HcCommandStatus (cmdstatus) register masks + */ +#define OHCI_HCR (1 << 0) /* host controller reset */ +#define OHCI_CLF (1 << 1) /* control list filled */ +#define OHCI_BLF (1 << 2) /* bulk list filled */ +#define OHCI_OCR (1 << 3) /* ownership change request */ +#define OHCI_SOC (3 << 16) /* scheduling overrun count */ + +/* + * masks used with interrupt registers: + * HcInterruptStatus (intrstatus) + * HcInterruptEnable (intrenable) + * HcInterruptDisable (intrdisable) + */ +#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */ +#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */ +#define OHCI_INTR_SF (1 << 2) /* start frame */ +#define OHCI_INTR_RD (1 << 3) /* resume detect */ +#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */ +#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */ +#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */ +#define OHCI_INTR_OC (1 << 30) /* ownership change */ +#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */ + + +/* Virtual Root HUB */ +struct virt_root_hub { + int devnum; /* Address of Root Hub endpoint */ + void *dev; /* was urb */ + void *int_addr; + int send; + int interval; +}; + +/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */ + +/* destination of request */ +#define RH_INTERFACE 0x01 +#define RH_ENDPOINT 0x02 +#define RH_OTHER 0x03 + +#define RH_CLASS 0x20 +#define RH_VENDOR 0x40 + +/* Requests: bRequest << 8 | bmRequestType */ +#define RH_GET_STATUS 0x0080 +#define RH_CLEAR_FEATURE 0x0100 +#define RH_SET_FEATURE 0x0300 +#define RH_SET_ADDRESS 0x0500 +#define RH_GET_DESCRIPTOR 0x0680 +#define RH_SET_DESCRIPTOR 0x0700 +#define RH_GET_CONFIGURATION 0x0880 +#define RH_SET_CONFIGURATION 0x0900 +#define RH_GET_STATE 0x0280 +#define RH_GET_INTERFACE 0x0A80 +#define RH_SET_INTERFACE 0x0B00 +#define RH_SYNC_FRAME 0x0C80 +/* Our Vendor Specific Request */ +#define RH_SET_EP 0x2000 + + +/* Hub port features */ +#define RH_PORT_CONNECTION 0x00 +#define RH_PORT_ENABLE 0x01 +#define RH_PORT_SUSPEND 0x02 +#define RH_PORT_OVER_CURRENT 0x03 +#define RH_PORT_RESET 0x04 +#define RH_PORT_POWER 0x08 +#define RH_PORT_LOW_SPEED 0x09 + +#define RH_C_PORT_CONNECTION 0x10 +#define RH_C_PORT_ENABLE 0x11 +#define RH_C_PORT_SUSPEND 0x12 +#define RH_C_PORT_OVER_CURRENT 0x13 +#define RH_C_PORT_RESET 0x14 + +/* Hub features */ +#define RH_C_HUB_LOCAL_POWER 0x00 +#define RH_C_HUB_OVER_CURRENT 0x01 + +#define RH_DEVICE_REMOTE_WAKEUP 0x00 +#define RH_ENDPOINT_STALL 0x01 + +#define RH_ACK 0x01 +#define RH_REQ_ERR -1 +#define RH_NACK 0x00 + + +/* OHCI ROOT HUB REGISTER MASKS */ + +/* roothub.portstatus [i] bits */ +#define RH_PS_CCS 0x00000001 /* current connect status */ +#define RH_PS_PES 0x00000002 /* port enable status*/ +#define RH_PS_PSS 0x00000004 /* port suspend status */ +#define RH_PS_POCI 0x00000008 /* port over current indicator */ +#define RH_PS_PRS 0x00000010 /* port reset status */ +#define RH_PS_PPS 0x00000100 /* port power status */ +#define RH_PS_LSDA 0x00000200 /* low speed device attached */ +#define RH_PS_CSC 0x00010000 /* connect status change */ +#define RH_PS_PESC 0x00020000 /* port enable status change */ +#define RH_PS_PSSC 0x00040000 /* port suspend status change */ +#define RH_PS_OCIC 0x00080000 /* over current indicator change */ +#define RH_PS_PRSC 0x00100000 /* port reset status change */ + +/* roothub.status bits */ +#define RH_HS_LPS 0x00000001 /* local power status */ +#define RH_HS_OCI 0x00000002 /* over current indicator */ +#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */ +#define RH_HS_LPSC 0x00010000 /* local power status change */ +#define RH_HS_OCIC 0x00020000 /* over current indicator change */ +#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */ + +/* roothub.b masks */ +#define RH_B_DR 0x0000ffff /* device removable flags */ +#define RH_B_PPCM 0xffff0000 /* port power control mask */ + +/* roothub.a masks */ +#define RH_A_NDP (0xff << 0) /* number of downstream ports */ +#define RH_A_PSM (1 << 8) /* power switching mode */ +#define RH_A_NPS (1 << 9) /* no power switching */ +#define RH_A_DT (1 << 10) /* device type (mbz) */ +#define RH_A_OCPM (1 << 11) /* over current protection mode */ +#define RH_A_NOCP (1 << 12) /* no over current protection */ +#define RH_A_POTPGT (0xff << 24) /* power on to power good time */ + +/* urb */ +#define N_URB_TD 48 +typedef struct +{ + ed_t *ed; + __u16 length; /* number of tds associated with this request */ + __u16 td_cnt; /* number of tds already serviced */ + int state; + unsigned long pipe; + int actual_length; + td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */ +} urb_priv_t; +#define URB_DEL 1 + +/* + * This is the full ohci controller description + * + * Note how the "proper" USB information is just + * a subset of what the full implementation needs. (Linus) + */ + + +typedef struct ohci { + struct ohci_hcca *hcca; /* hcca */ + /*dma_addr_t hcca_dma;*/ + + int irq; + int disabled; /* e.g. got a UE, we're hung */ + int sleeping; + unsigned long flags; /* for HC bugs */ + + struct ohci_regs *regs; /* OHCI controller's memory */ + + ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */ + ed_t *ed_bulktail; /* last endpoint of bulk list */ + ed_t *ed_controltail; /* last endpoint of control list */ + int intrstatus; + __u32 hc_control; /* copy of the hc control reg */ + struct usb_device *dev[32]; + struct virt_root_hub rh; + + const char *slot_name; +} ohci_t; + +#define NUM_EDS 8 /* num of preallocated endpoint descriptors */ + +struct ohci_device { + ed_t ed[NUM_EDS]; + int ed_cnt; +}; + +/* hcd */ +/* endpoint */ +static int ep_link(ohci_t * ohci, ed_t * ed); +static int ep_unlink(ohci_t * ohci, ed_t * ed); +static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe); + +/*-------------------------------------------------------------------------*/ + +/* we need more TDs than EDs */ +#define NUM_TD 64 + +/* +1 so we can align the storage */ +td_t gtd[NUM_TD+1]; +/* pointers to aligned storage */ +td_t *ptd; + +/* TDs ... */ +static inline struct td * +td_alloc (struct usb_device *usb_dev) +{ + int i; + struct td *td; + + td = NULL; + for (i = 0; i < NUM_TD; i++) + { + if (ptd[i].usb_dev == NULL) + { + td = &ptd[i]; + td->usb_dev = usb_dev; + break; + } + } + + return td; +} + +static inline void +ed_free (struct ed *ed) +{ + ed->usb_dev = NULL; +} diff -u -r --new-file u-boot-1.1.2/.cvsignore u-boot-1.1.2-neon/.cvsignore --- u-boot-1.1.2/.cvsignore 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/.cvsignore 2007-08-11 21:07:19.000000000 +0200 @@ -0,0 +1,13 @@ +*.map +*.scr +*.gz +select.h +*.log +select.mk +u-boot +u-boot.bin +u-boot.map +u-boot.map.sorted +u-boot.srec +u-boot-binaries.zip + diff -u -r --new-file u-boot-1.1.2/drivers/lan91c96.h u-boot-1.1.2-neon/drivers/lan91c96.h --- u-boot-1.1.2/drivers/lan91c96.h 2004-06-07 00:11:41.000000000 +0200 +++ u-boot-1.1.2-neon/drivers/lan91c96.h 2007-08-11 21:07:21.000000000 +0200 @@ -76,7 +76,7 @@ #define SMC_IO_EXTENT 16 -#ifdef CONFIG_PXA250 +#if defined( CONFIG_PXA250 ) || defined( CONFIG_PXA270 ) #define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+( r * 4 )))) #define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+( r * 4 )))) @@ -139,7 +139,7 @@ }; \ }) -#else /* if not CONFIG_PXA250 */ +#else /* if not CONFIG_PXA250 or CONFIG_PXA270 */ /* * We have only 16 Bit PCMCIA access on Socket 0 diff -u -r --new-file u-boot-1.1.2/drivers/smc91111.c u-boot-1.1.2-neon/drivers/smc91111.c --- u-boot-1.1.2/drivers/smc91111.c 2004-11-22 23:20:09.000000000 +0100 +++ u-boot-1.1.2-neon/drivers/smc91111.c 2007-08-11 21:07:21.000000000 +0200 @@ -1583,6 +1583,101 @@ return (0); } +#define SMC_GET_INT_MASK() (SMC_inw( SMC91111_INT_REG ) >> 8) +#define SMC_SET_INT_MASK(x) SMC_outw( (x) << 8, SMC91111_INT_REG ) +#define SMC_CURRENT_BANK() SMC_inw( BANK_SELECT ) +#define SMC_GET_CTL() SMC_inw( CTL_REG ) +#define SMC_SET_CTL(x) SMC_outw( x, CTL_REG ) +#define SMC_GET_MII() SMC_inw( MII_REG ) +#define SMC_SET_MII(x) SMC_outw( x, MII_REG ) +#define SMC_GET_PTR() SMC_inw( PTR_REG ) +#define SMC_SET_PTR(x) SMC_outw( x, PTR_REG ) + +static int writeEEprom(int i,unsigned short val,unsigned short ctl) +{ + SMC_SELECT_BANK( 2 ); + SMC_SET_PTR( i ); + SMC_SELECT_BANK( 1 ); + SMC_outw( val, GP_REG ); + udelay(1); + SMC_SET_CTL( ctl | CTL_EEPROM_SELECT | CTL_STORE ); + int j=0; + do { + udelay(10); + j++; + if (j>=100000) return -1; + } while (SMC_GET_CTL() & CTL_STORE); + return 0; +} + +#define SMC_SET_MAC_ADDR(addr) \ + do { \ + SMC_outw( addr[0]|(addr[1] << 8), ADDR0_REG ); \ + SMC_outw( addr[2]|(addr[3] << 8), ADDR1_REG ); \ + SMC_outw( addr[4]|(addr[5] << 8), ADDR2_REG ); \ + } while (0) + +int set_rom_mac (char const *mac) +{ + unsigned short saved_bank = SMC_CURRENT_BANK(); + SMC_SELECT_BANK( 2 ); + + unsigned short saved_mask = SMC_GET_INT_MASK(); + SMC_SET_INT_MASK( 0 ); + + unsigned short saved_ptr = SMC_GET_PTR(); + + SMC_SELECT_BANK( 1 ); + + unsigned short saved_ctl = SMC_GET_CTL(); + + SMC_SET_MAC_ADDR(mac); + + SMC_SELECT_BANK( 3 ); + unsigned short mii_reg = SMC_GET_MII(); + + SMC_SET_MII(mii_reg & ~(0x0f)); + + SMC_SELECT_BANK( 1 ); + + SMC_SET_CTL( saved_ctl | CTL_EEPROM_SELECT ); + unsigned short cfg = CONFIG_DEFAULT + | CONFIG_NO_WAIT + | CONFIG_EPH_POWER_EN; + unsigned short bar = (unsigned short)( SMC_BASE_ADDRESS ); +//a4, a10,a11,a12 must be all zeros + bar = (bar & 0xe000) | ((bar & 0x3e0)<<3) | (0x27); + int i=0; + while (i < 0x20) { + if (writeEEprom(i,cfg,saved_ctl)) break; + if (writeEEprom(i+1,bar,saved_ctl)) break; + if (writeEEprom(i+2,0,saved_ctl)) break; + if (writeEEprom(i+3,0,saved_ctl)) break; + i+=4; + } + + int j = 0; + if (i==0x20) { + while (j < 6) { + if (writeEEprom(i,mac[j]|(mac[j+1]<<8),saved_ctl)) break; + i++; j+=2; + } + } + + SMC_SET_CTL( saved_ctl ); + + SMC_SELECT_BANK( 2 ); + SMC_SET_PTR( saved_ptr ); + SMC_SET_INT_MASK( saved_mask ); + SMC_SELECT_BANK( saved_bank ); + + return 6 == j ; +} + +static char const invalidMac[6] = { + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF +}; + int get_rom_mac (char *v_rom_mac) { #ifdef HARDCODE_MAC /* used for testing or to supress run time warnings */ @@ -1601,6 +1696,9 @@ valid_mac |= v_rom_mac[i]; } + if( valid_mac ) + valid_mac = ( 0 != memcmp( invalidMac, v_rom_mac, sizeof(invalidMac) ) ); + return (valid_mac ? 1 : 0); #endif } diff -u -r --new-file u-boot-1.1.2/drivers/smc91111.h u-boot-1.1.2-neon/drivers/smc91111.h --- u-boot-1.1.2/drivers/smc91111.h 2004-11-02 14:00:56.000000000 +0100 +++ u-boot-1.1.2-neon/drivers/smc91111.h 2007-08-11 21:07:21.000000000 +0200 @@ -74,7 +74,7 @@ #define SMC_IO_EXTENT 16 -#ifdef CONFIG_PXA250 +#if defined( CONFIG_PXA250 ) || defined( CONFIG_PXA270 ) #ifdef CONFIG_XSENGINE #define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1)))) @@ -176,7 +176,7 @@ }; \ }) -#else /* if not CONFIG_PXA250 */ +#else /* if not CONFIG_PXA250 or CONFIG_PXA270 */ #ifndef CONFIG_SMC_USE_IOFUNCS /* these macros don't work on some boards */ /* diff -u -r --new-file u-boot-1.1.2/examples/Makefile u-boot-1.1.2-neon/examples/Makefile --- u-boot-1.1.2/examples/Makefile 2004-10-10 23:27:33.000000000 +0200 +++ u-boot-1.1.2-neon/examples/Makefile 2007-08-11 21:07:21.000000000 +0200 @@ -100,12 +100,12 @@ LIBCOBJS= stubs.o LIBOBJS = $(LIBAOBJS) $(LIBCOBJS) -gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) -clibdir := $(shell dirname `$(CC) $(CFLAGS) -print-file-name=libc.a`) +gcclibdir := $(shell dirname "`$(CC) -print-libgcc-file-name`") +clibdir := $(shell dirname "`$(CC) $(CFLAGS) -print-file-name=libc.a`") CPPFLAGS += -I.. -all: .depend $(LIB) $(SREC) $(BIN) +all: .depend $(LIB) ######################################################################### $(LIB): .depend $(LIBOBJS) diff -u -r --new-file u-boot-1.1.2/fs/fat/fat.c u-boot-1.1.2-neon/fs/fat/fat.c --- u-boot-1.1.2/fs/fat/fat.c 2004-12-16 18:57:26.000000000 +0100 +++ u-boot-1.1.2-neon/fs/fat/fat.c 2007-08-11 21:07:21.000000000 +0200 @@ -52,6 +52,8 @@ #define DOS_PART_TBL_OFFSET 0x1be #define DOS_PART_MAGIC_OFFSET 0x1fe #define DOS_FS_TYPE_OFFSET 0x36 +#define DOS_FS_TYPE_OFFSET_FAT_16 0x36 // Code relating to this constant was changed/added by Dubner 2005-05-20 +#define DOS_FS_TYPE_OFFSET_FAT_32 0x52 // Code relating to this constant was changed/added by Dubner 2005-05-20 int disk_read (__u32 startblock, __u32 getsize, __u8 * bufptr) { @@ -83,7 +85,8 @@ /* no signature found */ return -1; } - if(!strncmp(&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) { + if(!strncmp(&buffer[DOS_FS_TYPE_OFFSET_FAT_16],"FAT",3) + || !strncmp (&buffer[DOS_FS_TYPE_OFFSET_FAT_32], "FAT", 3)) { /* ok, we assume we are on a PBR only */ cur_part = 1; part_offset=0; @@ -342,7 +345,7 @@ newclust = get_fatent(mydata, endclust); if((newclust -1)!=endclust) goto getit; - if (newclust <= 0x0001 || newclust >= 0xfff0) { + if (newclust <= 0x0001 ) { // || newclust >= 0xfff0) { FAT_DPRINT("curclust: 0x%x\n", newclust); FAT_DPRINT("Invalid FAT entry\n"); return gotsize; @@ -890,7 +893,7 @@ dentptr++; continue; } - if (strcmp (fnamecopy, s_name) && strcmp (fnamecopy, l_name)) { + if (fnmatch(fnamecopy, s_name,0) && fnmatch(fnamecopy, l_name,0)) { FAT_DPRINT ("RootMismatch: |%s|%s|\n", s_name, l_name); dentptr++; continue; diff -u -r --new-file u-boot-1.1.2/include/asm-arm/arch-pxa/BigMacro.h u-boot-1.1.2-neon/include/asm-arm/arch-pxa/BigMacro.h --- u-boot-1.1.2/include/asm-arm/arch-pxa/BigMacro.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/asm-arm/arch-pxa/BigMacro.h 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,325 @@ +// +// linux/include/asm-arm/BigMacro.h +// +// Author: Troy Kisky +// Created: Jun 30, 2002 +// Copyright: Boundary Devices +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License version 2 as +// published by the Free Software Foundation. +// + .nolist + +//find set bit pair >= curbit +//out: __nBit + .ifdef __ARMASM + GBLA __nBit + GBLA __nMask + GBLA __nVal +; DCD __nV1 + +.macro NextSetBitUp val,curBit + LCLA __nV1 + .set __nBit,(\curBit) + .set __nV1,(\val) + WHILE ( (__nBit < 30) :LAND: ( (__nV1 :AND: (0x03:SHL:__nBit))=0) ) + .set __nBit,(__nBit)+2 + WEND +.endm + +//find set bit pair <= curbit +//out: __nBit +.macro NextSetBitDown val,curBit + LCLA __nV1 + .set __nBit,(\curBit) + .set __nV1,(\val) + WHILE ( (__nBit <> 0) :LAND: ( (__nV1:AND:(0xc0:SHL:__nBit))=0) ) + .set __nBit,(__nBit)-2 + WEND +.endm + .else + +.macro NextSetBitUp val,curBit + .set __nBit,(\curBit) + .set __nV1,(\val) + .if ((__nV1) & (0x03<<(__nBit))) + .else + .if ((__nBit)-30) + NextSetBitUp __nV1,((__nBit)+2) + .endif + .endif + .set __nV1,0 +.endm + +//find set bit pair <= curbit +//out: __nBit +.macro NextSetBitDown val,curBit + .set __nBit,(\curBit) + .set __nV1,(\val) + .if ((__nV1)&(0xc0<<(__nBit))) + .else + .if (__nBit) + NextSetBitDown __nV1,((__nBit)-2) + .endif + .endif + .set __nV1,0 +.endm + .endif + +//OUT: __nMask +.macro NextSetMask val + NextSetBitDown \val,24 + .if (__nBit>=20) + NextSetBitUp \val,__nBit + .set __nMask,(0xff<<((__nBit)-16)) + .set __nMask,(((__nMask)>>16)+(((__nMask)<<16)&0xffff0000)) + .else + .set __nMask,(0xff<<(__nBit)) + .endif + +.endm + +.macro Big2CC inst,dest,val + .set __nVal,(\val) + .if (__nVal)<>0 + NextSetMask __nVal + \inst \dest,\dest,#(__nVal)&(__nMask) + Big2CC \inst,\dest,(__nVal)&~(__nMask) + .endif +.endm + +.macro BigAnd2CC cc,dest,val + .set __nVal,(\val) + .if (~__nVal)<>0 + NextSetMask __nVal + .if (((__nVal)&~(__nMask))=0) + and\cc \dest,\dest,#(__nVal)&(__nMask) + .else + Big2CC bic\cc,\dest,~__nVal + .endif + .endif +.endm + +/////////////////////////////////////////////////////// +.macro BigMovCC cc,dest, val + .set __nVal,(\val) + NextSetMask ~__nVal + .if (((~(__nVal))&~(__nMask)) > 0x255) + NextSetMask __nVal + mov\cc \dest,#(__nVal)&(__nMask) + .if (((__nVal)&0xffff) ^ (((__nVal)>>16)&0xffff))<>0 + Big2CC orr\cc,\dest,(__nVal)&~(__nMask) + .else + .set __nVal,(__nVal)&~(__nMask) + .if (__nVal)<>0 + NextSetMask __nVal + orr\cc \dest,\dest,#(__nVal)&(__nMask) + .set __nVal,(__nVal)&~(__nMask) + .if (__nVal)<>0 + orr\cc \dest,\dest,\dest,LSR #16 + .endif + .endif + .endif + .else + mvn\cc \dest,#(~(__nVal))&(__nMask) //complement of complement is original + Big2CC bic\cc,\dest,(~(__nVal))&~(__nMask) + .endif +.endm + + +.macro BigAddCC cc,dest,src,val + .set __nVal,(\val) + .if (__nVal)<>0 + NextSetMask -__nVal + .if (((-(__nVal))&~(__nMask)) > 0x255) + NextSetMask __nVal + add\cc \dest,\src,#(__nVal)&(__nMask) + Big2CC add\cc,\dest,(__nVal)&~(__nMask) + .else + sub\cc \dest,\src,#(-(__nVal))&(__nMask) + Big2CC sub\cc,\dest,(-(__nVal))&~(__nMask) + .endif + .else + mov\cc \dest,\src + .endif +.endm + +.macro BigSubCC cc,dest,src,val + .set __nVal,(\val) + BigAddCC \cc,\dest,\src,-__nVal +.endm + +.macro BigCC inst,cc,dest,src,val + .set __nVal,(\val) + .if (__nVal)<>0 + NextSetMask __nVal + \inst\cc \dest,\src,#(__nVal)&(__nMask) + Big2CC \inst\cc,\dest,(__nVal)&~(__nMask) + .else + mov\cc \dest,\src + .endif +.endm + + +.macro BigAndCC cc,dest,src,val + .set __nVal,(\val) + .if (~__nVal)<>0 + NextSetMask __nVal + .if (((__nVal)&~(__nMask))=0) + and\cc \dest,\src,#(__nVal)&(__nMask) + .else + BigCC bic,\cc,\dest,\src,~__nVal + .endif + .else + mov\cc \dest,\src + .endif +.endm + +///////////////////////////////////// +//dest, value +.macro BigAdd2 dest,val + Big2CC add,\dest,\val +.endm +.macro BigAdd2Eq dest,val + Big2CC addeq,\dest,\val +.endm +.macro BigAdd2Ne dest,val + Big2CC addne,\dest,\val +.endm + +.macro BigSub2 dest,val + Big2CC sub,\dest,\val +.endm +.macro BigSub2Eq dest,val + Big2CC subeq,\dest,\val +.endm +.macro BigSub2Ne dest,val + Big2CC subne,\dest,\val +.endm + +.macro BigOrr2 dest,val + Big2CC orr,\dest,\val +.endm +.macro BigOrr2Eq dest,val + Big2CC orreq,\dest,\val +.endm +.macro BigOrr2Ne dest,val + Big2CC orrne,\dest,\val +.endm + +.macro BigEor2 dest,val + Big2CC eor,\dest,\val +.endm +.macro BigEor2Eq dest,val + Big2CC eoreq,\dest,\val +.endm +.macro BigEor2Ne dest,val + Big2CC eorne,\dest,\val +.endm +.macro BigEor2Cs dest,val + Big2CC eorcs,\dest,\val +.endm +.macro BigEor2Cc dest,val + Big2CC eorcc,\dest,\val +.endm + +.macro BigBic2 dest,val + Big2CC bic,\dest,\val +.endm +.macro BigBic2Eq dest,val + Big2CC biceq,\dest,\val +.endm +.macro BigBic2Ne dest,val + Big2CC bicne,\dest,\val +.endm + +.macro BigAnd2 dest,val + BigAnd2CC al,\dest,\val +.endm +.macro BigAnd2Eq dest,val + BigAnd2CC eq,\dest,\val +.endm +.macro BigAnd2Ne dest,val + BigAnd2CC ne,\dest,\val +.endm +///////////////////////////////////// + +.macro BigMov dest,val + BigMovCC al,\dest,\val +.endm +.macro BigMovEq dest,val + BigMovCC eq,\dest,\val +.endm +.macro BigMovNe dest,val + BigMovCC ne,\dest,\val +.endm +// dest,src,value +.macro BigAdd dest,src,val + BigAddCC al,\dest,\src,\val +.endm +.macro BigAddEq dest,src,val + BigAddCC eq,\dest,\src,\val +.endm +.macro BigAddNe dest,src,val + BigAddCC ne,\dest,\src,\val +.endm + +.macro BigSub dest,src,val + BigSubCC al,\dest,\src,\val +.endm +.macro BigSubEq dest,src,val + BigSubCC eq,\dest,\src,\val +.endm +.macro BigSubNe dest,src,val + BigSubCC ne,\dest,\src,\val +.endm + +.macro BigOrr dest,src,val + BigCC orr,al,\dest,\src,\val +.endm +.macro BigOrrEq dest,src,val + BigCC orr,eq,\dest,\src,\val +.endm +.macro BigOrrNe dest,src,val + BigCC orr,ne,\dest,\src,\val +.endm + +.macro BigEor dest,src,val + BigCC eor,al,\dest,\src,\val +.endm +.macro BigEorEq dest,src,val + BigCC eor,eq,\dest,\src,\val +.endm +.macro BigEorNe dest,src,val + BigCC eor,ne,\dest,\src,\val +.endm +.macro BigEorCs dest,src,val + BigCC eor,cs,\dest,\src,\val +.endm +.macro BigEorCc dest,src,val + BigCC eor,cc,\dest,\src,\val +.endm + +.macro BigBic dest,src,val + BigCC bic,al,\dest,\src,\val +.endm +.macro BigBicEq dest,src,val + BigCC bic,eq,\dest,\src,\val +.endm +.macro BigBicNe dest,src,val + BigCC bic,ne,\dest,\src,\val +.endm + +.macro BigAnd dest,src,val + BigAndCC al,\dest,\src,\val +.endm +.macro BigAndEq dest,src,val + BigAndCC eq,\dest,\src,\val +.endm +.macro BigAndNe dest,src,val + BigAndCC ne,\dest,\src,\val +.endm + +// ******************************************************************************************* + .list diff -u -r --new-file u-boot-1.1.2/include/asm-arm/arch-pxa/burn.inc u-boot-1.1.2-neon/include/asm-arm/arch-pxa/burn.inc --- u-boot-1.1.2/include/asm-arm/arch-pxa/burn.inc 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/asm-arm/arch-pxa/burn.inc 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,367 @@ +#define FLASH_GPIO_STATUS 0 //1 means use gp to tell when flash is ready + +#if (PLATFORM_TYPE==NEONB) +#define FLASH_BASE_ADDRESS 0x04000000 +#else +#define FLASH_BASE_ADDRESS 0x0 +#endif + + +#define FLASH_ID_CMD ((0x0090<<16) + 0x0090) //read Identifier Codes +#define FLASH_STATUS_CMD ((0x0070<<16) + 0x0070) +#define FLASH_STATUS_CLEAR_CMD ((0x0050<<16) + 0x0050) +#define FLASH_READ_CMD ((0x00FF<<16) + 0x00FF) //Read Array/Reset +#define FLASH_ERASE_CMD ((0x0020<<16) + 0x0020) //Block Erase +#define FLASH_CONFIRM_CMD ((0x00D0<<16) + 0x00D0) //Block Erase and Program Resume +//#define FLASH_WRITE_CMD ((0x0040<<16) + 0x0040) //Program word +#define FLASH_WRITE_TO_BUFFER_CMD ((0x00E8<<16) + 0x00E8) //Program word + +#define FLASH_SUCCESS_RSP ((0x0080<<16) + 0x0080) + +#define stmicro_manCode ((0x0020<<16) + 0x0020) +#define intel_manCode ((0x0089<<16) + 0x0089) +#define SECT_SIZE (1<<18) //256k + +#define f320j3a_devCode ((0x0016<<16) + 0x0016) +#define f320j3a_NUM_SECTORS 32 //for 8M flash +#define f320j3a_SIZE (f320j3a_NUM_SECTORS*SECT_SIZE) + +#define f640j3a_devCode ((0x0017<<16) + 0x0017) +#define f640j3a_NUM_SECTORS 64 //for 16M flash (8 meg on 16bit boards) +#define f640j3a_SIZE (f640j3a_NUM_SECTORS*SECT_SIZE) + +#define f128j3a_devCode ((0x0018<<16) + 0x0018) +#define f128j3a_NUM_SECTORS 128 //for 32M flash +#define f128j3a_SIZE (f128j3a_NUM_SECTORS*SECT_SIZE) +// ***************************** +#define MANCODE 0 +#define DEVCODE 4 + + + +#define rRet r6 +#define rRamSectorEnd r7 +#define rRamSector rNum1 +#define rRamEnd rNum2 +#define rFlashBase sl //r10 +#define rFlashSector fp //r11 + +#define CMD_BURN 0 +#define CMD_VERIFY 1 +#define CMD_BURNALL 2 + +.macro delayCnt rTemp,cnt + mov \rTemp,#\cnt +90: subs \rTemp,\rTemp,#1 + bne 90b +.endm +// ********************************* +//default delay is for write recovery before read, allow 400 MHZ cpu +.macro delay + delayCnt r4,((40/10)*COUNT_MULT) +.endm + + + +.macro FLASH_GPIO_WAIT_FOR_IDLE + .if FLASH_GPIO_STATUS + bl FlashGpioWaitForIdle + .endif +.endm + +.macro DEFINE_FLASH_GPIO_WAIT_FOR_IDLE + .if FLASH_GPIO_STATUS +FlashGpioWaitForIdle: +//500 ns delay for STS going low + delayCnt r4,((500/10)*COUNT_MULT) //500ns /10ns (for 100MHZ cpu cycle time) * 4 (100MHZ cpu) + mov r5,#0x300000 + BigMov r4,GPIO_BASE +91: ldr r2,[r4,#GPLR0] + and r2,r2,#3 + cmp r2,#3 + subnes r5,r5,#1 + bne 91b + mov pc,lr //return + .endif +.endm + +//out: z-1 timeout +.macro waitForReady istr,ildr,mask,inc + BigMov r2,FLASH_STATUS_CMD&\mask + \istr r2,[r1,#-\inc] + + FLASH_GPIO_WAIT_FOR_IDLE + BigMov r3,FLASH_SUCCESS_RSP&\mask + + mov r5,#0x300000*COUNT_MULT + .if FLASH_GPIO_STATUS + b 92f + .endif + +71: + delayCnt r4,((500/10)*COUNT_MULT) +92: \ildr r4,[r1,#-\inc] //!!! read status + and r4,r4,r3 + cmp r4,r3 + subnes r5,r5,#1 + bne 71b + + BigMov r2,FLASH_READ_CMD&\mask + \istr r2,[r1,#-\inc] + delay + teq r5,#0 +.endm + + + +//out: z-1 timeout +.macro WaitForEraseDone istr,ildr,mask + FLASH_GPIO_WAIT_FOR_IDLE + BigMov r3,FLASH_SUCCESS_RSP&\mask + mov r5,#0x10000 +92: + delayCnt r4,0x3000 + \ildr r4,[rFlashSector] + and r4,r4,r3 + cmp r4,r3 + subnes r5,r5,#1 + bne 92b + + BigMov r2,FLASH_READ_CMD&\mask + \istr r2,[rFlashSector,#0] + delay + teq r5,#0 +.endm +// *********************************** + +//r5 - command - CMD_BURN or CMD_BURNALL +//rRet(r6) succesful burn return address +//rRamSectorEnd(r7) - but not an input, just how it is used +//rRamSector(r8) - start +//rRamEnd(r9) - end +//rFlashBase(sl,r10) - flash base +//rFlashSector(fp,r11) - starting flash sector +//rDBG(sp,r13) +//lr - return address on failure + +.macro BurnRtn istr,ildr,mask,shift,sizeShift,inc,plait + str r5,[rDBG,#DBG_TEMP] + BigMov r0,FLASH_STATUS_CLEAR_CMD&\mask + \istr r0,[rFlashBase,#0] + delay + BigMov r0,FLASH_ID_CMD&\mask + \istr r0,[rFlashBase,#0] + delay + BigMov r4,intel_manCode&\mask + BigMov r1,stmicro_manCode&\mask + BigMov r5,f320j3a_devCode&\mask + \ildr r2,[rFlashBase,#MANCODE>>\shift] + \ildr r3,[rFlashBase,#DEVCODE>>\shift] + + BigMov r0,FLASH_READ_CMD&\mask + \istr r0,[rFlashBase,#0] + delayCnt r0,((40/10)*COUNT_MULT) + + mov r0,#f320j3a_SIZE>>\sizeShift + cmp r3,r5 + + BigMovNe r5,f128j3a_devCode&\mask + movne r0,#f128j3a_SIZE>>\sizeShift + cmpne r3,r5 + + BigMovNe r5,f640j3a_devCode&\mask + movne r0,#f640j3a_SIZE>>\sizeShift + cmpne r3,r5 + + cmpeq r2,r4 + cmpne r2,r1 + movne r0,#MANCODE>>2 + movne r1,#DEVCODE>>2 + movne pc,lr //return if unrecognized chip + + sub r1,rRamEnd,rRamSector + sub r2,rFlashSector,rFlashBase + add r1,r1,r2 + cmp r1,r0 + movhi pc,lr //return if trying to write too much + + ldrb r5,[rDBG,#DBG_TEMP] + cmp r5,#CMD_BURNALL + streq r0,[rDBG,#DBG_TEMP] //r0 is size of flash + + FLASH_GPIO_WAIT_FOR_IDLE +1: + bl PrintSector + +//Now see if block needs erased + add rRamSectorEnd,rRamSector,#SECT_SIZE>>\shift + cmp rRamSectorEnd,rRamEnd + movhi rRamSectorEnd,rRamEnd + b 3f +2: + ldr r2,[r0],#4 //read ram + ldr r3,[r1],#4 //read flash + and r4,r3,r2 + cmp r4,r2 + bne 10f +3: cmp r0,rRamSectorEnd + blo 2b + + + ldr r2,[rDBG,#DBG_TEMP] + movs r2,r2 + beq 20f + add r0,rFlashSector,#SECT_SIZE>>\shift + b 62f +61: + ldr r2,[r1],#4 //read flash + adds r2,r2,#1 + bne 10f +62: cmp r1,r0 + blo 61b + b 19f //erase not needed + +//erase +10: + BigMov r3,FLASH_READ_CMD&\mask + \istr r3,[rFlashBase,#0] + delay + ldr r3,[r1,#-4] //read flash + and r4,r3,r2 + cmp r4,r2 + beq 3b //br if (we signal) glitch caused a spurious status register read + + BigMov r0,FLASH_ERASE_CMD&\mask + \istr r0,[rFlashSector] + BigMov r0,FLASH_CONFIRM_CMD&\mask + \istr r0,[rFlashSector] + bl PrintErasing + + WaitForEraseDone \istr,\ildr,\mask + beq Timeout //br if erase timed out + + .if (\plait) + BigMov r0,FLASH_ERASE_CMD&\mask + \istr r0,[rFlashSector,#2] + BigMov r0,FLASH_CONFIRM_CMD&\mask + \istr r0,[rFlashSector,#2] + bl PrintErasing + + WaitForEraseDone \istr,\ildr,\mask + beq Timeout //br if erase timed out + .endif + +19: cmp rRamSector,rRamSectorEnd + bhs 42f + +//programming +20: + bl PrintProgramming +21: + ldr r2,[r0],#4 //read ram + ldr r3,[r1],#4 //read flash + cmp r2,r3 + bne 22f +28: + cmp r0,rRamSectorEnd + blo 21b + b 30f //goto verify + +22: + sub r1,r1,#4 + sub r0,r0,#4 + and r2,r1,#0x3f>>\shift //align to a 64 byte boundary (32 per device) + sub r1,r1,r2 + sub r0,r0,r2 + + BigMov r2,FLASH_WRITE_TO_BUFFER_CMD&\mask + \istr r2,[r1] //!!! write_to_buffer + + sub r3,rRamSectorEnd,r0 + mov r3,r3,LSR #2-\shift + sub r3,r3,#1 + cmp r3,#0x0f + movhi r3,#0x0f + orr r2,r3,r3,LSL #16 + \istr r2,[r1] //!!! word cnt -1 +25: \ildr r2,[r0],#\inc + \istr r2,[r1],#\inc //!!! words + subs r3,r3,#1 + bpl 25b + BigMov r2,FLASH_CONFIRM_CMD&\mask + \istr r2,[r1,#-\inc] //!!! confirm + + waitForReady \istr,\ildr,\mask,\inc + + .if (\plait) + beq 88f + sub r1,r1,#\inc + sub r0,r0,#\inc + and r2,r1,#0x3f>>\shift //align to a 64 byte boundary (32 per device) + sub r1,r1,r2 + sub r0,r0,r2 + + BigMov r2,FLASH_WRITE_TO_BUFFER_CMD&\mask + \istr r2,[r1,#2]! //!!! write_to_buffer + sub r3,rRamSectorEnd,r0 + add r0,r0,#2 + mov r3,r3,LSR #2-\shift + sub r3,r3,#1 + cmp r3,#0x0f + movhi r3,#0x0f + orr r2,r3,r3,LSL #16 + \istr r2,[r1] //!!! word cnt -1 +85: \ildr r2,[r0],#\inc + \istr r2,[r1],#\inc //!!! words + subs r3,r3,#1 + bpl 85b + BigMov r2,FLASH_CONFIRM_CMD&\mask + \istr r2,[r1,#-\inc] //!!! confirm + + waitForReady \istr,\ildr,\mask,\inc + sub r0,r0,#2 + sub r1,r1,#2 + + bne 28b +88: + + .else + bne 28b + .endif + sub rRamSector,r0,#0x40>>\shift //whoops, timeout + sub rFlashSector,r1,#0x40>>\shift + b Timeout + + + +//verify +30: + bl PrintVerifying +31: + ldr r2,[r0],#4 //read ram + ldr r3,[r1],#4 //read flash + cmp r2,r3 + bne 33f +32: cmp r0,rRamSectorEnd + blo 31b +42: + add rRamSector,rRamSector,#SECT_SIZE>>\shift + add rFlashSector,rFlashSector,#SECT_SIZE>>\shift + cmp rRamSector,rRamEnd + blo 1b //goto next sector + + ldr r2,[rDBG,#DBG_TEMP] + add r2,r2,rFlashBase + cmp rFlashSector,r2 + blo 1b + + b PrintSuccess +33: + BigMov r3,FLASH_READ_CMD&\mask + \istr r3,[rFlashBase,#0] + delay + ldr r3,[r1,#-4] //read flash + cmp r2,r3 + beq 32b //br if (we signal) glitch caused a spurious status register read + b ReturnError +.endm diff -u -r --new-file u-boot-1.1.2/include/asm-arm/arch-pxa/miniMac.inc u-boot-1.1.2-neon/include/asm-arm/arch-pxa/miniMac.inc --- u-boot-1.1.2/include/asm-arm/arch-pxa/miniMac.inc 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/asm-arm/arch-pxa/miniMac.inc 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,476 @@ +#include "platformTypes.h" +#define SUB_LR_FALL_THRU_FOR_FIQ 1 //0 for branch +#define LITTLE_ENDIAN 1 //describes memory system +#define DDEBUG 0 +#define DO_GPTEST 0 + +#define MACH_TYPE_SCANPASS 332 + +#define ATAG_CORE 0x54410001 +#define ATAG_MEM 0x54410002 +#define TAGGED_LIST 0xa0000100 + .ifdef __ARMASM + GBLA STACKS_VALID + GBLA CONFIG_STACKS_VALID + .set CONFIG_STACKS_VALID,1 + .endif + +#if (SOFTWARE_TYPE==WINCE) + .set STACKS_VALID,1 + .ifdef __ARMASM + .else +#ifndef CONFIG_STACKS_VALID +#define CONFIG_STACKS_VALID 1 +#endif + .endif + +#define SDRAM_BASE_C_VIRTUAL 0xA0000000 //0x80000000 is cached mapped, 0xa0000000 is uncacheable +#define UART_VIRT_BASE 0xAA100000 +#define VMA_DEBUG (0xfff00000) +#define VIRTUAL_CS0 0xa8000000 +#define VIRTUAL_CS1 0xa8000000 + +#else +#ifdef CONFIG_STACKS_VALID + .set STACKS_VALID,1 +#else + .set STACKS_VALID,0 +#endif +#define SDRAM_BASE_C_VIRTUAL 0xC0000000 +#define UART_VIRT_BASE 0xf8100000 +//#define VMA_DEBUG 0xff000000 +//!!!!!for some reason the above base causes bizarre problems +#define VMA_DEBUG (0xfff00000) +#define VIRTUAL_CS0 0xff000000 +#define VIRTUAL_CS1 0xff100000 +#endif + +#define V_rWork r2 +#define V_rBranch r3 +#define I_rWork r2 +#define I_rBranch sp //r13 + +#ifdef CONFIG_STACKS_VALID +#define rWork V_rWork +#define rBranch V_rBranch + +#else +#define rWork I_rWork +#define rBranch I_rBranch +#endif + + +#if 0 +#define RED_VAL 0x15 +#define GREEN_VAL 0x2a +#define BLUE_VAL 0x0a +#else +#define RED_VAL 0x0 +#define GREEN_VAL 0x0 +#define BLUE_VAL 0x0 +#endif + +//#define BAUDRATE 9600 +//#define BAUDRATE 38400 +//#define BAUDRATE 57600 +//#define BAUDRATE 57600 +#define BAUDRATE 115200 +//#define BAUDRATE 230400 + +#if (CPU_CLOCK==100) +#define COUNT_MULT 1 +#else +#if (CPU_CLOCK==200) +#define COUNT_MULT 2 +#else +#if (CPU_CLOCK==300) +#define COUNT_MULT 3 +#else +#define COUNT_MULT 4 +#endif +#endif +#endif + +#if 1 //(SOFTWARE_TYPE==WINCE) +#define RECEIVE_LOOP_COUNT 0x10000*COUNT_MULT +#else +#if (PLATFORM_TYPE==GAME_CONTROLLER_PLAITED_A1)||(PLATFORM_TYPE==GAME_CONTROLLER)||(PLATFORM_TYPE==GAME_WITH_SMC) +#define RECEIVE_LOOP_COUNT 0x100000*COUNT_MULT +#else +#define RECEIVE_LOOP_COUNT 0x300000*3*COUNT_MULT +#endif +#endif + +// ********************************************************** +#define DBG_MAGIC 95 //this allows BigMov sp,DEBUG_BASE+DBG_MAGIC to generate just 1 instruction +//#define DBG_START -95 +#define DBG_START 0 +#define DBG_R0 ((0<<2)+DBG_START) +#define DBG_R1 ((1<<2)+DBG_START) +#define DBG_R2 ((2<<2)+DBG_START) +#define DBG_R3 ((3<<2)+DBG_START) +#define DBG_R4 ((4<<2)+DBG_START) +#define DBG_R5 ((5<<2)+DBG_START) +#define DBG_R6 ((6<<2)+DBG_START) +#define DBG_R7 ((7<<2)+DBG_START) +#define DBG_R8 ((8<<2)+DBG_START) +#define DBG_R9 ((9<<2)+DBG_START) +#define DBG_SL ((10<<2)+DBG_START) +#define DBG_FP ((11<<2)+DBG_START) +#define DBG_IP ((12<<2)+DBG_START) +#define DBG_SP ((13<<2)+DBG_START) +#define DBG_LR ((14<<2)+DBG_START) +#define DBG_PC ((15<<2)+DBG_START) +#define DBG_CPSR ((16<<2)+DBG_START) //this and above have corresponding symbol #s + +#define DBG_HCPSR ((17<<2)+DBG_START) //interrupt handler original CPSR +#define DBG_TRACE ((18<<2)+DBG_START) +#define DBG_LastSignal ((19<<2)+DBG_START) //only 1 byte +#define DBG_Mode (((19<<2)+1)+DBG_START) //only 1 byte, bit 0 -1 means gdb mode for control breaks +#define DBG_FFUART_LCR (((19<<2)+2)+DBG_START) //only 1 byte +#define DBG_HSP ((20<<2)+DBG_START) //handler stack pointer on entry, for aborts +#define DBG_TEMP ((21<<2)+DBG_START) +//22 free +#define DBG_ABORT_PC ((23<<2)+DBG_START) +#define DBG_INDIRECT_R0 ((24<<2)+DBG_START) //it needs it's own space in case a debug interrupt +#define DBG_INDIRECT_LR ((25<<2)+DBG_START) //happens in the return code, but memory is mapped if used +#define DEBUG_SPACE (((23<<2)|0x1f)+1) //a multiple of 32 bytes + +// ********************************************************* + +#define DEBUG_START (VMA_DEBUG+0x3000-DEBUG_SPACE) //this saves on memory, but the else is easier to debug +#define VMA_DEBUG_OFFSET (0xffff0000-VMA_DEBUG) +#define DEBUG_BASE (DEBUG_START-DBG_START) +#define DEBUG_SYM DEBUG_START + + +#define SYM_R0 0 +#define SYM_R1 1 +#define SYM_R2 2 +#define SYM_R3 3 +#define SYM_R4 4 +#define SYM_R5 5 +#define SYM_R6 6 +#define SYM_R7 7 +#define SYM_R8 8 +#define SYM_R9 9 +#define SYM_SL 10 +#define SYM_FP 11 +#define SYM_IP 12 +#define SYM_SP 13 +#define SYM_LR 14 +#define SYM_PC 15 +#define SYM_CPSR 16 + +//#define SYM_SPSR 17 //nice to have, but do it later +//#define SYM_FPS 17 +#define SYM_FP0 17 //40 bits, 5 +#define SYM_FSR 18 +#define SYM_FAR 19 +#define SYM_DCSR 20 +#define SYM_TTBR 21 +#define SYM_CTRL 22 + +#define SYM_LAST 22 + +#define SYM_LAST_RCMD (SYM_FP0) //last symbol printed by R cmd + + + +#define SIG_RESET 0 +#define SIG_UNDEFINED_INSTRUCTION 1 +#define SIG_SWI 2 +#define SIG_PREFETCH_ABORT 3 +#define SIG_DATA_ABORT 4 +#define SIG_UNUSED 5 +#define SIG_IRQ 6 +#define SIG_FIQ 7 +#define SIG_DBG 8 +#define SIG_DBG_RESET 8+0 +#define SIG_DBG_INSTRUCTION_BKPT 8+1 +#define SIG_DBG_DATA_BKPT 8+2 +#define SIG_DBG_BKPT_SOFTWARE 8+3 +#define SIG_DBG_EXTERNAL 8+4 +#define SIG_DBG_VECTOR_TRAP 8+5 +#define SIG_DBG_TRACE_BUFFER_FULL 8+6 +#define SIG_DBG_RESERVED 8+7 + +#define GDB_EXIT_CHAR 0x0d +// ****************************************************************** +#define rFieldStart r4 +#define rField r5 +#define rValidCnt r6 +#define rCommand r7 +#define rNum1 r8 +#define rNum2 r9 +#define rSymbol sl //r10 +#define rPrevNum1 fp //r11 +#define rUart ip //r12 +#define rDBG sp + +//in Go routine, temporary +#define rBCR0 sl //r10 +#define rBCR1 fp //r11 + +//in GDB routines +#define rGdbCmd r5 +#define rGdbNum1 r6 +#define rGdbTermChar1 r7 +#define rGdbNum2 r8 +#define rGdbTermChar2 r9 +#define rGdbNum3 sl //r10 +#define rGdbChkSum fp //r11 + +//in Download routine +#define rDest r3 +#define rPacketLength r4 +#define rDestHead r5 +#define rBlockNum r6 +#define rNak r7 +#define rCRC r8 +#define rRunningCRC r9 +#define rPrevCRC sl //r10 + +#define rSP r8 //register which contains L4(' ',' ',' ',' '), all spaces +// ******** + +#define CR 0x0d +#define LF 0x0a + +// ****************************** +#define F_INC 4 + +#define F_NUM1_BIT (F_INC*3) +#define F_NUM2_BIT (F_INC*5) + +#define F_COMMAND 1<<(F_INC) +#define F_NUM1 1<<(F_NUM1_BIT) +#define F_NUM2 1<<(F_NUM2_BIT) +#define F_UNDEF 1<<(F_INC*7) + +#define F_COMMAND_MASK ((1<0 + b 93f + .set cnt,cnt-1 + WEND + .else + .rept (\branch) + b 93f + .endr + .endif + +AfterPCPrint: + mov r0,#0x55 + b AfterPCPrint1 +InitializeCont: + b MainInitializationCode +93: +.endm + + +.macro RelocationVector branch //vector table at 0xffff0000, br to vector table at VMA_DEBUG + //warning, do not use relocated vectors unless memory management is enabled and VMA_DEBUG is mapped + .ifdef __ARMASM + LCLA cnt + .set cnt,$branch + WHILE cnt>0 + b 71f + .set cnt,cnt-1 + WEND + .else + .rept (\branch) + b 71f + .endr + .endif + + mov pc,#0x00 //0 - reset always goes to 0 because it will be in physical memory mode for instructions + b .-VMA_DEBUG_OFFSET //4 - UndefinedInstr + b .-VMA_DEBUG_OFFSET //8 - SWI + b .-VMA_DEBUG_OFFSET //0x0c - PrefetchAbort + b .-VMA_DEBUG_OFFSET //0x10 - DataAbort + b .-VMA_DEBUG_OFFSET //0x14 - Unused + b .-VMA_DEBUG_OFFSET //0x18 - IRQ + .if SUB_LR_FALL_THRU_FOR_FIQ + sub lr,lr,#4 //0x1c - FIQ + .else + b .-VMA_DEBUG_OFFSET //0x1c - FIQ + .endif + +//these instructions are always at this address +//to minimize the effect of a mismatch of minicache and flash +ReturnWithIndirection: + mov r0,r0 //!!!! make sure this instruction is in the 1st 4k of flash so that BigOrr2Ne is guaranteed to work + ldr pc,[sp],#4 + +//c-0 invalidate caches, c-1 skip cache invalidate +//z-1 return direct, z-0 return indirect +InvalidateAndReturn: + adrne lr,ReturnWithIndirection + ldreq lr,[r0,#DBG_PC-DBG_R2] + BigOrr2Ne lr,VMA_DEBUG //this range is sure to give an external abort for errata on exiting SDS + +//Invalidate the data/instruction cache and branch target buffer + + CP15_CF_INVAL_BOTH mcrcc,r1 + CPWAIT r1 + + ldr sp,[r0,#DBG_HSP-DBG_R2] + ldr r1,[r0,#DBG_R1-DBG_R2] + str r0,[r0,#DBG_ABORT_PC-DBG_R2] //reset error flag so abort can be retried + ldr r0,[r0,#DBG_R0-DBG_R2] + movs pc,lr +71: +.endm + +.macro CheckBranch rTemp,rAddr + movs \rTemp,pc //don't redirect if running from flash + submi \rAddr, \rAddr, #0x00010000 + ldrmi \rTemp, [\rAddr], #8 + eormi \rTemp, \rTemp, #0xea000000 + tstmi \rTemp, #0xff000000 + moveq \rTemp, \rTemp, LSL #8 + addeq \rAddr, \rAddr, \rTemp, ASR #6 +.endm +.macro CheckLdr rTemp,rAddr //check for instruction LDR pc,[pc,#nnn] + eor \rTemp, \rTemp, #0x0f900000 + eor \rTemp, \rTemp, #0x000ff000 + cmp \rTemp, #0x1000 + ldrcc \rAddr,[\rAddr,\rTemp] +.endm + +//this is case where stacks are assumed valid +.macro V_VectorEntrance Work,Branch,code + stmdb sp!,{\Work,\Branch,lr} + mov \Branch,#\code<<2 +.endm +.macro V_VectorExitCC Work,Branch,cc,ccia + str\cc \Branch,[sp,#8] + ldm\ccia sp!,{\Work,\Branch,pc} +.endm +.macro V_VectorExitCC1 Work,Branch,cc,ccia + str\cc \Branch,[sp,#8] + ldm\ccia sp!,{\Work,\Branch,pc} +.endm + +//this is case where stacks are assumed invalid +.macro I_VectorEntrance Work,Branch,code + BigMov \Branch,DEBUG_BASE+DBG_MAGIC + str \Work,[\Branch,#DBG_TEMP-DBG_MAGIC] + mov \Branch, #\code<<2 +.endm +.macro I_VectorExitCC Work,Branch,cc,ccia + BigMovCC \cc,\Work,DEBUG_BASE+DBG_MAGIC + ldr\cc \Work,[\Work,#DBG_TEMP-DBG_MAGIC] + bx\cc \Branch +.endm +.macro I_VectorExitCC1 Work,Branch,cc,ccia + BigMov \Work,DEBUG_BASE+DBG_MAGIC + ldr\cc \Work,[\Work,#DBG_TEMP-DBG_MAGIC] + bx\cc \Branch +.endm +.macro VectorEntrance Work,Branch,code + .if STACKS_VALID + V_VectorEntrance \Work,\Branch,\code + .else + I_VectorEntrance \Work,\Branch,\code + .endif +.endm +.macro JOIN brcc + .if STACKS_VALID + \brcc join_fiq + .else + \brcc join_irq + .endif +.endm +.macro JOIN2 brcc + .if STACKS_VALID + \brcc join_fiq2 + .else + \brcc join_irq2 + .endif +.endm +// ***************************************************** + +.macro SaveRegisters rBase,rTemp + CalcMemSize \rBase,\rTemp,MEMORY_CONTROL_BASE //out: \rTemp - mem size + BigAdd \rBase,\rTemp,MEM_START-0x1000+((DEBUG_BASE+DBG_MAGIC)&0xfff) //last 4k of memory + mov \rTemp,#0 +//great, now memory should be working, let's save registers, only r0(rBase),sp(rTemp) have been lost +//don't trust LDM,STM instructions in debug mode.... +//or LDR w/Rd=PC, LDR w/RRX addressing mode, SWP, LDC, STC +// ******************************************************* +// ******************************************************* + str \rTemp,[\rBase,#DBG_START-32 -DBG_MAGIC] + str \rTemp,[\rBase,#DBG_R0 -DBG_MAGIC] + str r1, [\rBase,#DBG_R1 -DBG_MAGIC] + str r2, [\rBase,#DBG_R2 -DBG_MAGIC] + str r3, [\rBase,#DBG_R3 -DBG_MAGIC] + str \rTemp,[\rBase,#DBG_TRACE -DBG_MAGIC] + str \rTemp,[\rBase,#DBG_LastSignal-DBG_MAGIC] +.endm +.macro ReadHexE dest,rCnt1 + +#if LITTLE_ENDIAN + mov \rCnt1,#4 + mov \dest,#0 +1: bl ReadHex + bcc CheckSumError + add rGdbChkSum,rGdbChkSum,r0 //update checksum + mov r1,r1,LSL #28 + add \dest,r1,\dest,LSR #8 + + bl ReadHex + bcc CheckSumError + add rGdbChkSum,rGdbChkSum,r0 //update checksum + add \dest,\dest,r1,LSL #24 +#else + mov \rCnt1,#8 + mov \dest,#0 +1: bl ReadHex + bcc CheckSumError + add rGdbChkSum,rGdbChkSum,r0 //update checksum + add \dest,r1,\dest,LSL #4 +#endif + subs \rCnt1,\rCnt1,#1 + bne 1b +.endm + + + diff -u -r --new-file u-boot-1.1.2/include/asm-arm/arch-pxa/mmc.h u-boot-1.1.2-neon/include/asm-arm/arch-pxa/mmc.h --- u-boot-1.1.2/include/asm-arm/arch-pxa/mmc.h 2003-06-27 23:32:42.000000000 +0200 +++ u-boot-1.1.2-neon/include/asm-arm/arch-pxa/mmc.h 2007-08-11 21:07:21.000000000 +0200 @@ -4,7 +4,7 @@ * Author: Vladimir Shebordaev, Igor Oblakov * Copyright: MontaVista Software Inc. * - * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $ + * $Id: mmc.h,v 1.3 2005/04/16 17:05:19 ericn Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -113,12 +113,17 @@ #define MMC_CMD_SET_RCA 3 #define MMC_CMD_SEND_CSD 9 #define MMC_CMD_SEND_CID 10 +#define MMC_CMD_STOP 12 #define MMC_CMD_SEND_STATUS 13 #define MMC_CMD_SET_BLOCKLEN 16 #define MMC_CMD_READ_BLOCK 17 #define MMC_CMD_RD_BLK_MULTI 18 #define MMC_CMD_WRITE_BLOCK 24 +#define SD_APP_CMD55 55 /* 0x37 */ +#define SD_APP_CMD41 41 /* 0x29 */ +#define SD_STATUS 13 /* 0x0D */ + #define MMC_MAX_BLOCK_SIZE 512 #define MMC_R1_IDLE_STATE 0x01 @@ -197,4 +202,15 @@ } mmc_csd_t; +typedef struct sd_status { + ulong prot_size ; + ushort card_type ; + ushort bus_width:2, + secured_mode:1, + unused0: 13 ; +} sd_status_t ; + +extern uchar * +mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat); + #endif /* __MMC_PXA_P_H__ */ diff -u -r --new-file u-boot-1.1.2/include/asm-arm/arch-pxa/platformTypes.h u-boot-1.1.2-neon/include/asm-arm/arch-pxa/platformTypes.h --- u-boot-1.1.2/include/asm-arm/arch-pxa/platformTypes.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/asm-arm/arch-pxa/platformTypes.h 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,19 @@ +#ifndef __PLATFORMTYPES_H__ +#define __PLATFORMTYPES_H__ 1 +#define NEON 1 +#define NEONB 2 +#define BD2003 3 +#define GAME_WITH_SMC 4 +#define GAME_CONTROLLER 5 +#define GAME_CONTROLLER_PLAITED_A1 6 +#define BOUNDARY_OLD_BOARD 7 //lcd pin reordering for rgb problem, don't use VLIO(gp18 is turnstile) +#define OLD_GAME_CONTROLLER 8 +#define HALOGEN 9 + +#if (PLATFORM_TYPE==NEONB) +#define PHYS_FLASH_BASE 0x04000000 +#else +#define PHYS_FLASH_BASE 0x0 +#endif + +#endif diff -u -r --new-file u-boot-1.1.2/include/asm-arm/arch-pxa/pxa250Base.h u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxa250Base.h --- u-boot-1.1.2/include/asm-arm/arch-pxa/pxa250Base.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxa250Base.h 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,60 @@ +#ifndef __PXA250BASE_H__ +#define __PXA250BASE_H__ 1 + +#ifdef __ARMASM +#define USE_PHYSICAL 1 +#else +#ifndef _MSC_VER +#define USE_PHYSICAL 1 +#endif +#endif + + +#ifndef USE_PHYSICAL +#if EBOOT_PHYS +#define USE_PHYSICAL 1 +#endif +#endif + +#if USE_PHYSICAL +#define PCMCIA_CARD0_IO 0x20000000 +#define PCMCIA_CARD0_ATTR 0x28000000 +#define PCMCIA_CARD0_MEM 0x2c000000 + +#define PCMCIA_CARD1_IO 0x30000000 +#define PCMCIA_CARD1_ATTR 0x38000000 +#define PCMCIA_CARD1_MEM 0x3c000000 + +#define FFUART_BASE 0x40100000 +#define BTUART_BASE 0x40200000 +#define STUART_BASE 0x40700000 +#define UART_BASE FFUART_BASE +//#define UART_BASE BTUART_BASE + +#define OS_TIMER_BASE 0x40a00000 +#define IC_BASE 0x40D00000 +#define GPIO_BASE 0x40E00000 +#define PWR_MANAGER_BASE 0x40F00000 +#define CLK_MANAGER_BASE 0x41300000 +#define LCD_CONTROL_BASE 0x44000000 +#define MEMORY_CONTROL_BASE 0x48000000 + +#define MEM_START 0xa0000000 + + +#else +#include "xsc1.h" + +#define PCMCIA_CARD0_IO PCMCIA_S0_IO_U_VIRTUAL +#define PCMCIA_CARD0_ATTR PCMCIA_S0_ATTR_U_VIRTUAL +#define PCMCIA_CARD0_MEM PCMCIA_S0_CMN_U_VIRTUAL + +#define PCMCIA_CARD1_IO PCMCIA_S1_IO_U_VIRTUAL +#define PCMCIA_CARD1_ATTR PCMCIA_S1_ATTR_U_VIRTUAL +#define PCMCIA_CARD1_MEM PCMCIA_S0_CMN_U_VIRTUAL + +#define MEMORY_CONTROL_BASE MEMC_BASE_U_VIRTUAL +#define GPIO_BASE GPIO_BASE_U_VIRTUAL +#endif + +#endif diff -u -r --new-file u-boot-1.1.2/include/asm-arm/arch-pxa/pxaGpio25x.h u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaGpio25x.h --- u-boot-1.1.2/include/asm-arm/arch-pxa/pxaGpio25x.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaGpio25x.h 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,218 @@ +//gpios for PLATFORM_TYPE== NEON,NEONB,BD2003, or BOUNDARY_OLD_BOARD + +#define LCD_CS_STATE HIGH + +//CP - Clock and Power Management Unit +//MMC - Multimedia Card Controller +//MC - Memory Controller +//SIU - System Integration Unit +//SSP - Synchronous Serial Port +//AC - Audio Controller (AC97) +//FF - Full Function UART +//BT - Blue Tooth UART +//ST - standard UART Port +//LCD - LCD Controller + SPEC_GP 0,IN,HIGH,0 // flash ready low 16, or magStripe T1 Clk(SMC) + SPEC_GP 1,IN,HIGH,0 //CP_RST, flash ready high 16, or magStripe T2 Clk(SMC) + +#if (PLATFORM_TYPE==NEONB) + SPEC_GP 2,IN,HIGH,0 //USB client connection status + SPEC_GP 3,IN,HIGH,0 //float means USB Slave not ready to accept data + //out 1 means ready (D+ signal) + SPEC_GP 4,OUT,LOW,0 //low means don't provide 12 volts to I2C bus +#else +#if (PLATFORM_TYPE==NEON) + SPEC_GP 2,IN,HIGH,0 //USB client connection status + SPEC_GP 3,IN,HIGH,0 //float means USB Slave not ready to accept data + SPEC_GP 4,IN,HIGH,0 //UCB1400 irq on NEON board +#else + SPEC_GP 2,OUT,LOW,0 //output to transistor (unused), OUT_DRY_CONTACT2 + SPEC_GP 3,OUT,HIGH,0 + SPEC_GP 4,IN,HIGH,0 //interrupt for USB irq 1 +#endif +#endif + + SPEC_GP 5,IN,HIGH,0 //interrupt for USB irq 2, or SM501 + SPEC_GP 6,OUT,HIGH,1 //MMC_CLK + SPEC_GP 7,OUT,LOW,0 //CP_48MHZ !!! red led, NEON:J13,pin3 + SPEC_GP 8,OUT,HIGH,1 //MMC_CCS0 + SPEC_GP 9,OUT,LOW,0 //MMC_CCS1, !!! doorlock, or OUT_DRY_CONTACT1 + SPEC_GP 10,IN,HIGH,0 //SIU_RTCCLK, Neon/Neonb data 1 for SDIO interrupt + +#if (PLATFORM_TYPE==NEON) + SPEC_GP 11,OUT,HIGH,0 //CP_3600KHZ, NEON:J12,pin1 +#else + SPEC_GP 11,IN,HIGH,0 //CP_3600KHZ, suspend USB slave +#endif + SPEC_GP 12,IN,HIGH,0 //CP_32KHZ, suspend USB host + +#if (PLATFORM_TYPE==NEON) || (PLATFORM_TYPE==NEONB) + SPEC_GP 13,OUT,HIGH,2 //MC_MBGNT + SPEC_GP 14,IN,HIGH,1 //MC_MBREQ +#else + SPEC_GP 13,OUT,HIGH,0 //USB wakeup slave + SPEC_GP 14,IN,HIGH,0 //UCB1400 IRQ +#endif + + +#if (PLATFORM_TYPE==NEONB) + SPEC_GP 15,OUT,HIGH,2 //MC_nCS1, eeprom +#else +#if (PLATFORM_TYPE==NEON) + SPEC_GP 15,OUT,LOW,0 //MC_nCS1, NEON:J13, pin 1 +#else + SPEC_GP 15,OUT,LOW,0 //MC_nCS1, !!! amber led +#endif +#endif + + +#if (PLATFORM_TYPE==NEON) || (PLATFORM_TYPE==NEONB) + SPEC_GP 16,OUT,HIGH,0 //LCD backlight brightness control + SPEC_GP 17,OUT,HIGH,0 //LCD backlight ON/OFF +#else + SPEC_GP 16,IN,HIGH,0 //SIU_PWM0, !!! feedback2, left in + SPEC_GP 17,IN,HIGH,0 //SIU_PWM1, !!! feedback1, right in +#endif + +#if (PLATFORM_TYPE==BOUNDARY_OLD_BOARD) + SPEC_GP 18,OUT,HIGH,0 //MC_RDY, !!! turnstile +#else + SPEC_GP 18,IN,HIGH,1 //MC_RDY, VIO_READY +#endif + +#if (PLATFORM_TYPE==NEON) || (PLATFORM_TYPE==NEONB) + SPEC_GP 19,OUT,HIGH,0 //MC_DREQ1, nc +#else + SPEC_GP 19,IN,HIGH,1 //MC_DREQ1, DMA request for USB DC +#endif + +#if (PLATFORM_TYPE==NEON) || (PLATFORM_TYPE==NEONB) + SPEC_GP 20,OUT,HIGH,1 //MC_DREQ0, nc +#else + SPEC_GP 20,IN,HIGH,1 //MC_DREQ0, DMA request for USB HC +#endif + + SPEC_GP 21,IN,HIGH,0 // pcmcia card detect + SPEC_GP 22,IN,HIGH,0 // pcmcia intr (active low) + +#if (PLATFORM_TYPE==NEON) || (PLATFORM_TYPE==NEONB) + SPEC_GP 23,IN,LOW,0 //UCB1400 irq for NEONB, nc for NEW NEON +#else + SPEC_GP 23,OUT,HIGH,0 //SSP_SCLK, nc +#endif + +#if (PLATFORM_TYPE==NEON) || (PLATFORM_TYPE==NEONB) + SPEC_GP 24,IN,LOW,0 //SSP_SFRM, SMSC interrupt (active high) +#else + SPEC_GP 24,OUT,HIGH,0 //SSP_SFRM, nc +#endif + + SPEC_GP 25,OUT,HIGH,0 //SSP_TXD, nc + SPEC_GP 26,OUT,HIGH,0 //SSP_RXD, nc + SPEC_GP 27,OUT,LOW,0 //SSP_EXTCLK, DC1 (SMC) + + SPEC_GP 28,IN,HIGH,1 //AC_BITCLK, ac97 bitclk + SPEC_GP 29,IN,HIGH,1 //AC_SDATAIN0, ac97 datain0 + SPEC_GP 30,OUT,HIGH,2 //AC_SDATAOUT, ac97 data out + SPEC_GP 31,OUT,HIGH,2 //AC_SYNC, ac97 sync +//////////////////////////////////////////////////////////////////////////////////////////// + + + SPEC_GP 32,OUT,HIGH,0 //AC_SDATAIN1, wet contact + SPEC_GP 33,OUT,LOW,0 //MC_nCS5, green led (left), NEON:J13,pin 2 + SPEC_GP 34,IN,HIGH,1 //FF_RXD + SPEC_GP 35,IN,HIGH,1 //FF_CTS + SPEC_GP 36,IN,HIGH,0 //FF_DCD, MMC Card Detect + SPEC_GP 37,IN,HIGH,1 //FF_DSR + SPEC_GP 38,IN,HIGH,0 //FF_RI, MMC Write Protect, MMC/SDIO IRQ + SPEC_GP 39,OUT,HIGH,2 //FF_TXD + SPEC_GP 40,OUT,HIGH,2 //FF_DTR + SPEC_GP 41,OUT,HIGH,2 //FF_RTS + SPEC_GP 42,IN,HIGH,1 //BT_RXD + SPEC_GP 43,OUT,HIGH,2 //BT_TXD +#if (PLATFORM_TYPE==NEON) + SPEC_GP 44,IN,HIGH,0 //BT_CTS, NEON:J12,pin 2 +#else + SPEC_GP 44,OUT,HIGH,0 //BT_CTS, USB wakeup host +#endif + SPEC_GP 45,OUT,LOW,0 //BT_RTS, HIGH 2 +#if (PLATFORM_TYPE==NEON) + SPEC_GP 46,IN,HIGH,0 //ST_RXD, NEON:J12,pin 3 +#else + SPEC_GP 46,IN,HIGH,2 //ST_RXD +#endif + SPEC_GP 47,OUT,HIGH,1 //ST_TXD + SPEC_GP 48,OUT,HIGH,2 //MC_nPOE, pcmcia + SPEC_GP 49,OUT,HIGH,2 //MC_nPWE, pcmcia + SPEC_GP 50,OUT,HIGH,2 //MC_nPIOR, pcmcia + SPEC_GP 51,OUT,HIGH,2 //MC_nPIOW, pcmcia + SPEC_GP 52,OUT,HIGH,2 //MC_nPCE1, pcmcia + SPEC_GP 53,OUT,HIGH,2 //MC_nPCE2, pcmcia + SPEC_GP 54,OUT,HIGH,2 //MC_nPSKTSEL, nc + SPEC_GP 55,OUT,HIGH,2 //MC_nPREG, pcmcia attribe vs Io space + SPEC_GP 56,IN,HIGH,1 //MC_nPWAIT pcmcia busy + SPEC_GP 57,IN,HIGH,1 //MC_nIOIS16, pcmcia 16 bit wide + SPEC_GP 58,OUT,HIGH,ALT_LCD //LCD_LDD0, also GP_PIX_D0 + SPEC_GP 59,OUT,HIGH,ALT_LCD //LCD_LDD1, also GP_PIX_D1 + SPEC_GP 60,OUT,HIGH,ALT_LCD //LCD_LDD2, also GP_PIX_D2 + SPEC_GP 61,OUT,HIGH,ALT_LCD //LCD_LDD3, also GP_PIX_D3 + SPEC_GP 62,OUT,HIGH,ALT_LCD //LCD_LDD4, also GP_PIX_D4 + SPEC_GP 63,OUT,HIGH,ALT_LCD //LCD_LDD5, also GP_PIX_D5 + + +//////////////////////////////////////////////////////////////////////////////////////////// + + + SPEC_GP 64,OUT,HIGH,ALT_LCD //LCD_LDD6, also GP_PIX_D6 + SPEC_GP 65,OUT,HIGH,ALT_LCD //LCD_LDD7, also GP_PIX_D7 + SPEC_GP 66,OUT,HIGH,ALT_LCD //LCD_LDD8, also GP_PIX_RESET + SPEC_GP 67,OUT,HIGH,ALT_LCD //LCD_LDD9 + SPEC_GP 68,OUT,HIGH,ALT_LCD //LCD_LDD10 + SPEC_GP 69,OUT,HIGH,ALT_LCD //LCD_LDD11 + SPEC_GP 70,OUT,HIGH,ALT_LCD //LCD_LDD12 + + SPEC_GP 71,OUT,HIGH,ALT_LCD //LCD_LDD13 + + SPEC_GP 72,OUT,HIGH,ALT_LCD //LCD_LDD14 + SPEC_GP 73,OUT,HIGH,ALT_LCD //LCD_LDD15 + SPEC_GP 74,OUT,HIGH,ALT_LCD //LCD_FCLK, also GP_PIX_READ + SPEC_GP 75,OUT,LCD_CS_STATE,ALT_LCD //LCD_LCLK, also GP_PIX_CS1 + SPEC_GP 76,OUT,LCD_CS_STATE,ALT_LCD //LCD_PCLK, also GP_PIX_CS0 + SPEC_GP 77,OUT,HIGH,ALT_LCD //LCD_ACBIAS, also GP_PIX_A0 + SPEC_GP 78,OUT,HIGH,2 //nCS2, DMA acknowledge channel 1 for USB, SMC91c111 Chip Select nDATACS + SPEC_GP 79,OUT,HIGH,2 //nCS3, DMA acknowledge channel 2 for USB, SM501 Chip Select + SPEC_GP 80,OUT,HIGH,2 //nCS4, USB chip select, SMC91c111 Chip Select + SPEC_GP 81,IN,LOW,0 //GND (pin F16), pxa255 has 9 extra gpios + SPEC_GP 82,IN,LOW,0 //GND (pin E16) + SPEC_GP 83,IN,LOW,0 //GND (pin E15) + SPEC_GP 84,IN,LOW,0 //GND (pin D16) + SPEC_GP 85,IN,LOW,0 //GND (pin F15) +//to maintain compatibility with code written for the pxa250 +//the meaning of gp86-gp89's direction bit is reversed, and alternate function is forced to the SDRAM/AC97 unit's control + SPEC_GP 86,IN,HIGH,0 //SDCS2 (pin G3) set as OUTPUT!!! + SPEC_GP 87,IN,HIGH,0 //SDCS3 (pin F2) set as OUTPUT!!! + SPEC_GP 88,IN,HIGH,0 //old RDnWR(pin D3) set as OUTPUT!!! + SPEC_GP 89,IN,LOW,0 //old ac97_reset(pin D10), set as OUTPUT!!! + SPEC_GP 90,IN,LOW,0 //undefined + SPEC_GP 91,IN,LOW,0 //undefined + SPEC_GP 92,IN,LOW,0 //undefined + SPEC_GP 93,IN,LOW,0 //undefined + SPEC_GP 94,IN,LOW,0 //undefined + SPEC_GP 95,IN,LOW,0 //undefined + +// **************************************************************************** + CREATE_MASK_DIR DRVAL0, SPEC_, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 + CREATE_MASK_LEVEL SRVAL0, SPEC_, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 + CREATE_MASK_ALT AFVAL0, SPEC_, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + CREATE_MASK_ALT AFVAL16,SPEC_,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 + + CREATE_MASK_DIR DRVAL32,SPEC_,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63 + CREATE_MASK_LEVEL SRVAL32,SPEC_,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63 + CREATE_MASK_ALT AFVAL32,SPEC_,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47 + CREATE_MASK_ALT AFVAL48,SPEC_,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63 + + CREATE_MASK_DIR DRVAL64,SPEC_,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95 + CREATE_MASK_LEVEL SRVAL64,SPEC_,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95 + CREATE_MASK_ALT AFVAL64,SPEC_,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79 + CREATE_MASK_ALT AFVAL80,SPEC_,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95 + diff -u -r --new-file u-boot-1.1.2/include/asm-arm/arch-pxa/pxaGpio27x.h u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaGpio27x.h --- u-boot-1.1.2/include/asm-arm/arch-pxa/pxaGpio27x.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaGpio27x.h 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,221 @@ +//gpios for HALOGEN + +//CP - Clock and Power Management Unit +//MMC - Multimedia Card Controller +//MC - Memory Controller +//SIU - System Integration Unit +//SSP - Synchronous Serial Port +//AC - Audio Controller (AC97) +//FF - Full Function UART +//BT - Blue Tooth UART +//ST - standard UART Port +//LCD - LCD Controller + + SPEC_GP 0,IN,HIGH,0 // + SPEC_GP 1,IN,HIGH,0 //nRESET_GPIO, usb client connect interrupt + + SPEC_GP 2,IN,HIGH,0 //SYS_EN + + SPEC_GP 3,IN,HIGH,0 //PWR_SCL, Rev 1 usb client enable, float means USB Slave not ready to accept data + //out 1 means ready + + SPEC_GP 4,IN,HIGH,0 //PWR_SDA + + SPEC_GP 5,IN,HIGH,0 //PWR_CAP 0 + SPEC_GP 6,IN,HIGH,0 //PWR_CAP 1 + SPEC_GP 7,IN,HIGH,0 //PWR_CAP 2 + SPEC_GP 8,IN,HIGH,0 //PWR_CAP 3 + SPEC_GP 9,OUT,HIGH,0 //NC +#if (PLATFORM_REV==1) + SPEC_GP 10,OUT,HIGH,0 //NC, rev 1 doesn't have MMC write protect, or card detect +#else + SPEC_GP 10,IN,HIGH,0 //MMC card detect +#endif + + SPEC_GP 11,OUT,HIGH,0 //NC + SPEC_GP 12,OUT,HIGH,0 //NC + SPEC_GP 13,OUT,HIGH,0 //NC + + SPEC_GP 14,OUT,HIGH,0 //NC + SPEC_GP 15,OUT,HIGH,2 //nCS1, NC + + + SPEC_GP 16,OUT,LOW,0 //PWM0 backlight intensity, 0 brightest + SPEC_GP 17,OUT,HIGH,0 //NC + + SPEC_GP 18,IN,HIGH,1 //MC_RDY, VIO_READY + + SPEC_GP 19,OUT,HIGH,0 //NC + + SPEC_GP 20,OUT,HIGH,1 //MC_DREQ0, NC + + SPEC_GP 21,OUT,HIGH,0 //NC + SPEC_GP 22,OUT,HIGH,0 //NC + +#if (PLATFORM_REV==1) + SPEC_GP 23,OUT,HIGH,0 //NC +#else + SPEC_GP 23,IN,HIGH,0 //rev 2 UCB1400 int +#endif + + SPEC_GP 24,IN,LOW,0 //LAN91c111 Interrupt pin (SMSC) + + SPEC_GP 25,OUT,HIGH,0 //SSP_TXD, nc + SPEC_GP 26,OUT,HIGH,0 //SSP_RXD, nc + SPEC_GP 27,OUT,HIGH,0 //NC + + SPEC_GP 28,IN,HIGH,1 //AC_BITCLK, ac97 bitclk + SPEC_GP 29,IN,HIGH,1 //AC_SDATAIN0, ac97 datain0 + SPEC_GP 30,OUT,HIGH,2 //AC_SDATAOUT, ac97 data out + SPEC_GP 31,OUT,HIGH,2 //AC_SYNC, ac97 sync +//////////////////////////////////////////////////////////////////////////////////////////// + + + SPEC_GP 32,OUT,HIGH,2 //MMCLK + SPEC_GP 33,OUT,HIGH,0 //MC_nCS5, NC + SPEC_GP 34,IN,HIGH,1 //(in alt 1:FF_RXD) (out alt 1:USB_P2_2) 2 input, Session Valid + SPEC_GP 35,IN,HIGH,0 //(in alt 1:FF_CTS) (in alt 2:USB_P2_1) 1 input, SRP Detect +#if (PLATFORM_REV==1) + SPEC_GP 36,OUT,HIGH,0 //(in alt 1:FF_DCD) +#else + SPEC_GP 36,IN,HIGH,0 //(in alt 1:FF_DCD) (out alt 1:USB_P2_4) 4 output Vbus Enable +#endif + SPEC_GP 37,OUT,HIGH,0 //(in alt 1:FF_DSR) (out alt 1:USB_P2_8) 8 output Vbus Pulsing Enable for SRP + + SPEC_GP 38,IN,HIGH,0 //(in alt 1:FF_RI) (in alt 3:USB_P2_3) //MMC Write Protect (rev 1 is NC),// 3 input, Vbus valid 4.4 Volts + SPEC_GP 39,OUT,HIGH,2 //(out alt 2:FF_TXD) (out alt 1:USB_P2_6) + +#if (PLATFORM_REV==1) + SPEC_GP 40,OUT,HIGH,2 //(out alt 2:FF_DTR) +#else + SPEC_GP 40,IN,HIGH,0 //(out alt 2:FF_DTR) (in alt 3:USB_P2_5) 5 input, Vbus valid 4.0 Volts +#endif + + SPEC_GP 41,OUT,HIGH,2 //(out alt 2:FF_RTS) (in alt 2:USB_P2_7) 7 input OTG ID + SPEC_GP 42,IN,HIGH,1 //BT_RXD + SPEC_GP 43,OUT,HIGH,2 //BT_TXD + SPEC_GP 44,OUT,HIGH,0 //BT_CTS, NC + SPEC_GP 45,OUT,LOW,0 //BT_RTS, NC + SPEC_GP 46,IN,HIGH,2 //ST_RXD + SPEC_GP 47,OUT,HIGH,1 //ST_TXD + SPEC_GP 48,OUT,HIGH,2 //MC_nPOE,NC + SPEC_GP 49,OUT,HIGH,2 //MC_nPWE + SPEC_GP 50,OUT,HIGH,2 //MC_nPIOR, NC + SPEC_GP 51,OUT,HIGH,2 //MC_nPIOW, NC + SPEC_GP 52,OUT,HIGH,2 //MC_nPCE1, NC + SPEC_GP 53,OUT,HIGH,2 //MC_nPCE2, NC + SPEC_GP 54,OUT,HIGH,2 //MC_nPSKTSEL, nc + SPEC_GP 55,OUT,HIGH,2 //MC_nPREG, NC + SPEC_GP 56,IN,HIGH,1 //MC_nPWAIT NC + SPEC_GP 57,IN,HIGH,1 //MC_nIOIS16, NC + SPEC_GP 58,OUT,HIGH,ALT_LCD //LCD_LDD0 + SPEC_GP 59,OUT,HIGH,ALT_LCD //LCD_LDD1 + SPEC_GP 60,OUT,HIGH,ALT_LCD //LCD_LDD2 + SPEC_GP 61,OUT,HIGH,ALT_LCD //LCD_LDD3 + SPEC_GP 62,OUT,HIGH,ALT_LCD //LCD_LDD4 + SPEC_GP 63,OUT,HIGH,ALT_LCD //LCD_LDD5 + + +//////////////////////////////////////////////////////////////////////////////////////////// + + + SPEC_GP 64,OUT,HIGH,ALT_LCD //LCD_LDD6 + SPEC_GP 65,OUT,HIGH,ALT_LCD //LCD_LDD7 + SPEC_GP 66,OUT,HIGH,ALT_LCD //LCD_LDD8 + SPEC_GP 67,OUT,HIGH,ALT_LCD //LCD_LDD9 + SPEC_GP 68,OUT,HIGH,ALT_LCD //LCD_LDD10 + SPEC_GP 69,OUT,HIGH,ALT_LCD //LCD_LDD11 + SPEC_GP 70,OUT,HIGH,ALT_LCD //LCD_LDD12 + + SPEC_GP 71,OUT,HIGH,ALT_LCD //LCD_LDD13 + + SPEC_GP 72,OUT,HIGH,ALT_LCD //LCD_LDD14 + SPEC_GP 73,OUT,HIGH,ALT_LCD //LCD_LDD15 + SPEC_GP 74,OUT,HIGH,ALT_LCD //LCD_FCLK, NC + SPEC_GP 75,OUT,HIGH,ALT_LCD //LCD_LCLK + SPEC_GP 76,OUT,HIGH,ALT_LCD //LCD_PCLK + SPEC_GP 77,OUT,HIGH,ALT_LCD //LCD_ACBIAS + SPEC_GP 78,OUT,HIGH,2 //nCS2, SMC91c111 Chip Select nDATACS + SPEC_GP 79,OUT,HIGH,2 //nCS3, NC + SPEC_GP 80,OUT,HIGH,2 //nCS4, SMC91c111 Chip Select + SPEC_GP 81,OUT,HIGH,0 //NC + SPEC_GP 82,OUT,HIGH,0 //NC + SPEC_GP 83,OUT,HIGH,0 //NC + SPEC_GP 84,OUT,HIGH,0 //NC + SPEC_GP 85,OUT,HIGH,0 //NC + SPEC_GP 86,OUT,HIGH,ALT_LCD //LDD16 + SPEC_GP 87,OUT,HIGH,ALT_LCD //LDD17 +#if (PLATFORM_REV==1) + SPEC_GP 88,OUT,HIGH,0 //NC + SPEC_GP 89,OUT,HIGH,0 //NC +#else + SPEC_GP 88,IN,HIGH,1 //port 1 usb power over current + SPEC_GP 89,OUT,HIGH,0 //port 1 usb power enable (driver needs to enable usb power (LOW,2) +#endif + + SPEC_GP 90,OUT,HIGH,0 //NC + SPEC_GP 91,OUT,HIGH,0 //NC + SPEC_GP 92,OUT,HIGH,1 //MMDAT + SPEC_GP 93,OUT,HIGH,0 //NC + SPEC_GP 94,OUT,HIGH,0 //NC + SPEC_GP 95,OUT,HIGH,0 //NC + SPEC_GP 96,OUT,HIGH,0 //NC + SPEC_GP 97,OUT,HIGH,0 //NC + SPEC_GP 98,OUT,HIGH,0 //NC + SPEC_GP 99,OUT,HIGH,0 //NC + SPEC_GP 100,OUT,HIGH,0 //NC + SPEC_GP 101,OUT,HIGH,0 //NC + SPEC_GP 102,OUT,HIGH,0 //NC + SPEC_GP 103,OUT,HIGH,0 //port 1,USB Power Enable for REV 1 board (driver needs to enable usb power (LOW,0) + SPEC_GP 104,OUT,HIGH,0 //NC + +#if (PLATFORM_REV==1) + SPEC_GP 105,IN,HIGH,0 //USB Overcurrent +#else + SPEC_GP 105,OUT,HIGH,0 //NC +#endif + + SPEC_GP 106,OUT,HIGH,0 //NC + SPEC_GP 107,OUT,HIGH,0 //NC + SPEC_GP 108,OUT,HIGH,0 //NC + SPEC_GP 109,OUT,HIGH,1 //MMDAT 1 + SPEC_GP 110,OUT,HIGH,1 //MMDAT 2 + SPEC_GP 111,OUT,HIGH,1 //MMDAT 3 + SPEC_GP 112,OUT,HIGH,1 //MMCMD + SPEC_GP 113,OUT,HIGH,2 //AC97 Reset, NC + SPEC_GP 114,OUT,HIGH,0 //NC + SPEC_GP 115,OUT,HIGH,0 //NC + SPEC_GP 116,OUT,HIGH,0 //NC + SPEC_GP 117,OUT,HIGH,1 //SCL (I2C) + SPEC_GP 118,OUT,HIGH,1 //SDA (I2C) + SPEC_GP 119,OUT,HIGH,0 //NC + SPEC_GP 120,OUT,HIGH,0 //NC + SPEC_GP 121,IN,LOW,0 //undefined + SPEC_GP 122,IN,LOW,0 //undefined + SPEC_GP 123,IN,LOW,0 //undefined + SPEC_GP 124,IN,LOW,0 //undefined + SPEC_GP 125,IN,LOW,0 //undefined + SPEC_GP 126,IN,LOW,0 //undefined + SPEC_GP 127,IN,LOW,0 //undefined + +// **************************************************************************** + CREATE_MASK_DIR DRVAL0, SPEC_, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 + CREATE_MASK_LEVEL SRVAL0, SPEC_, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 + CREATE_MASK_ALT AFVAL0, SPEC_, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + CREATE_MASK_ALT AFVAL16,SPEC_,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 + + CREATE_MASK_DIR DRVAL32,SPEC_,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63 + CREATE_MASK_LEVEL SRVAL32,SPEC_,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63 + CREATE_MASK_ALT AFVAL32,SPEC_,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47 + CREATE_MASK_ALT AFVAL48,SPEC_,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63 + + CREATE_MASK_DIR DRVAL64,SPEC_,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95 + CREATE_MASK_LEVEL SRVAL64,SPEC_,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95 + CREATE_MASK_ALT AFVAL64,SPEC_,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79 + CREATE_MASK_ALT AFVAL80,SPEC_,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95 + + CREATE_MASK_DIR DRVAL96,SPEC_,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127 + CREATE_MASK_LEVEL SRVAL96,SPEC_,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127 + CREATE_MASK_ALT AFVAL96,SPEC_, 96, 97, 98, 99,100,101,102,103,104,105,106,107,108,109,110,111 + CREATE_MASK_ALT AFVAL112,SPEC_,112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127 + diff -u -r --new-file u-boot-1.1.2/include/asm-arm/arch-pxa/pxaGpio.h u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaGpio.h --- u-boot-1.1.2/include/asm-arm/arch-pxa/pxaGpio.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaGpio.h 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,142 @@ +#include "platformTypes.h" + +#define IN 0 +#define OUT 1 + +#define LOW 0 +#define HIGH 1 + + .ifdef __ARMASM +.macro SPEC_GP gp_,dir,level,alt +SPEC_\gp_ EQU \dir+(\level<<8)+(\alt<<16) +.endm + .else +.macro SPEC_GP gp_,dir,level,alt + .set SPEC_\gp_,\dir+(\level<<8)+(\alt<<16) +.endm + .endif +// ***************************************************************************************** +.macro CREATE_MASK_DIR name,prefix,p0,p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,p11,p12,p13,p14,p15,p16,p17,p18,p19,p20,p21,p22,p23,p24,p25,p26,p27,p28,p29,p30,p31 + .ifdef __ARMASM + LCLA mask + .endif + .set mask,((\prefix\p0&1)<<(\p0&0x1f)) + .set mask,mask | ((\prefix\p1&1)<<(\p1&0x1f)) + .set mask,mask | ((\prefix\p2&1)<<(\p2&0x1f)) + .set mask,mask | ((\prefix\p3&1)<<(\p3&0x1f)) + .set mask,mask | ((\prefix\p4&1)<<(\p4&0x1f)) + .set mask,mask | ((\prefix\p5&1)<<(\p5&0x1f)) + .set mask,mask | ((\prefix\p6&1)<<(\p6&0x1f)) + .set mask,mask | ((\prefix\p7&1)<<(\p7&0x1f)) + .set mask,mask | ((\prefix\p8&1)<<(\p8&0x1f)) + .set mask,mask | ((\prefix\p9&1)<<(\p9&0x1f)) + .set mask,mask | ((\prefix\p10&1)<<(\p10&0x1f)) + .set mask,mask | ((\prefix\p11&1)<<(\p11&0x1f)) + .set mask,mask | ((\prefix\p12&1)<<(\p12&0x1f)) + .set mask,mask | ((\prefix\p13&1)<<(\p13&0x1f)) + .set mask,mask | ((\prefix\p14&1)<<(\p14&0x1f)) + .set mask,mask | ((\prefix\p15&1)<<(\p15&0x1f)) + .set mask,mask | ((\prefix\p16&1)<<(\p16&0x1f)) + .set mask,mask | ((\prefix\p17&1)<<(\p17&0x1f)) + .set mask,mask | ((\prefix\p18&1)<<(\p18&0x1f)) + .set mask,mask | ((\prefix\p19&1)<<(\p19&0x1f)) + .set mask,mask | ((\prefix\p20&1)<<(\p20&0x1f)) + .set mask,mask | ((\prefix\p21&1)<<(\p21&0x1f)) + .set mask,mask | ((\prefix\p22&1)<<(\p22&0x1f)) + .set mask,mask | ((\prefix\p23&1)<<(\p23&0x1f)) + .set mask,mask | ((\prefix\p24&1)<<(\p24&0x1f)) + .set mask,mask | ((\prefix\p25&1)<<(\p25&0x1f)) + .set mask,mask | ((\prefix\p26&1)<<(\p26&0x1f)) + .set mask,mask | ((\prefix\p27&1)<<(\p27&0x1f)) + .set mask,mask | ((\prefix\p28&1)<<(\p28&0x1f)) + .set mask,mask | ((\prefix\p29&1)<<(\p29&0x1f)) + .set mask,mask | ((\prefix\p30&1)<<(\p30&0x1f)) + .set mask,mask | ((\prefix\p31&1)<<(\p31&0x1f)) + .ifdef __ARMASM +\name EQU mask + .else + .set \name,mask + .endif +.endm + +.macro CREATE_MASK_LEVEL name,prefix,p0,p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,p11,p12,p13,p14,p15,p16,p17,p18,p19,p20,p21,p22,p23,p24,p25,p26,p27,p28,p29,p30,p31 + .ifdef __ARMASM + LCLA mask + .endif + .set mask,(((\prefix\p0>>8)&1)<<(\p0&0x1f)) + .set mask,mask | (((\prefix\p1>>8)&1)<<(\p1&0x1f)) + .set mask,mask | (((\prefix\p2>>8)&1)<<(\p2&0x1f)) + .set mask,mask | (((\prefix\p3>>8)&1)<<(\p3&0x1f)) + .set mask,mask | (((\prefix\p4>>8)&1)<<(\p4&0x1f)) + .set mask,mask | (((\prefix\p5>>8)&1)<<(\p5&0x1f)) + .set mask,mask | (((\prefix\p6>>8)&1)<<(\p6&0x1f)) + .set mask,mask | (((\prefix\p7>>8)&1)<<(\p7&0x1f)) + .set mask,mask | (((\prefix\p8>>8)&1)<<(\p8&0x1f)) + .set mask,mask | (((\prefix\p9>>8)&1)<<(\p9&0x1f)) + .set mask,mask | (((\prefix\p10>>8)&1)<<(\p10&0x1f)) + .set mask,mask | (((\prefix\p11>>8)&1)<<(\p11&0x1f)) + .set mask,mask | (((\prefix\p12>>8)&1)<<(\p12&0x1f)) + .set mask,mask | (((\prefix\p13>>8)&1)<<(\p13&0x1f)) + .set mask,mask | (((\prefix\p14>>8)&1)<<(\p14&0x1f)) + .set mask,mask | (((\prefix\p15>>8)&1)<<(\p15&0x1f)) + .set mask,mask | (((\prefix\p16>>8)&1)<<(\p16&0x1f)) + .set mask,mask | (((\prefix\p17>>8)&1)<<(\p17&0x1f)) + .set mask,mask | (((\prefix\p18>>8)&1)<<(\p18&0x1f)) + .set mask,mask | (((\prefix\p19>>8)&1)<<(\p19&0x1f)) + .set mask,mask | (((\prefix\p20>>8)&1)<<(\p20&0x1f)) + .set mask,mask | (((\prefix\p21>>8)&1)<<(\p21&0x1f)) + .set mask,mask | (((\prefix\p22>>8)&1)<<(\p22&0x1f)) + .set mask,mask | (((\prefix\p23>>8)&1)<<(\p23&0x1f)) + .set mask,mask | (((\prefix\p24>>8)&1)<<(\p24&0x1f)) + .set mask,mask | (((\prefix\p25>>8)&1)<<(\p25&0x1f)) + .set mask,mask | (((\prefix\p26>>8)&1)<<(\p26&0x1f)) + .set mask,mask | (((\prefix\p27>>8)&1)<<(\p27&0x1f)) + .set mask,mask | (((\prefix\p28>>8)&1)<<(\p28&0x1f)) + .set mask,mask | (((\prefix\p29>>8)&1)<<(\p29&0x1f)) + .set mask,mask | (((\prefix\p30>>8)&1)<<(\p30&0x1f)) + .set mask,mask | (((\prefix\p31>>8)&1)<<(\p31&0x1f)) + .ifdef __ARMASM +\name EQU mask + .else + .set \name,mask + .endif +.endm + +.macro CREATE_MASK_ALT name,prefix,p0,p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,p11,p12,p13,p14,p15 + .ifdef __ARMASM + LCLA mask + .endif + .set mask,(((\prefix\p0>>16)&3)<<((\p0&0x0f)<<1)) + .set mask,mask | (((\prefix\p1>>16)&3)<<((\p1&0x0f)<<1)) + .set mask,mask | (((\prefix\p2>>16)&3)<<((\p2&0x0f)<<1)) + .set mask,mask | (((\prefix\p3>>16)&3)<<((\p3&0x0f)<<1)) + .set mask,mask | (((\prefix\p4>>16)&3)<<((\p4&0x0f)<<1)) + .set mask,mask | (((\prefix\p5>>16)&3)<<((\p5&0x0f)<<1)) + .set mask,mask | (((\prefix\p6>>16)&3)<<((\p6&0x0f)<<1)) + .set mask,mask | (((\prefix\p7>>16)&3)<<((\p7&0x0f)<<1)) + .set mask,mask | (((\prefix\p8>>16)&3)<<((\p8&0x0f)<<1)) + .set mask,mask | (((\prefix\p9>>16)&3)<<((\p9&0x0f)<<1)) + .set mask,mask | (((\prefix\p10>>16)&3)<<((\p10&0x0f)<<1)) + .set mask,mask | (((\prefix\p11>>16)&3)<<((\p11&0x0f)<<1)) + .set mask,mask | (((\prefix\p12>>16)&3)<<((\p12&0x0f)<<1)) + .set mask,mask | (((\prefix\p13>>16)&3)<<((\p13&0x0f)<<1)) + .set mask,mask | (((\prefix\p14>>16)&3)<<((\p14&0x0f)<<1)) + .set mask,mask | (((\prefix\p15>>16)&3)<<((\p15&0x0f)<<1)) + .ifdef __ARMASM +\name EQU mask + .else + .set \name,mask + .endif +.endm + +#if (PLATFORM_TYPE==NEON)||(PLATFORM_TYPE==NEONB)||(PLATFORM_TYPE==BD2003)||(PLATFORM_TYPE==BOUNDARY_OLD_BOARD) +#define ALT_LCD 2 +#include "pxaGpio25x.h" +#else +#if (PLATFORM_TYPE==HALOGEN) +#define ALT_LCD 2 +#include "pxaGpio27x.h" +#else +#include "pxaGpioGame.h" +#endif +#endif diff -u -r --new-file u-boot-1.1.2/include/asm-arm/arch-pxa/pxaHardware.h u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaHardware.h --- u-boot-1.1.2/include/asm-arm/arch-pxa/pxaHardware.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaHardware.h 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,288 @@ +//#define GPIO_BASE 0x40E00000 +#define GPLR0 0x00 //level +#define GPLR1 0x04 +#define GPLR2 0x08 +#define GPLR3 0x100 //level + +#define GPDR0 0x0c //direction +#define GPDR1 0x10 +#define GPDR2 0x14 +#define GPDR3 0x10c //direction + +#define GPSR0 0x18 //set +#define GPSR1 0x1C +#define GPSR2 0x20 +#define GPSR3 0x118 //set + +#define GPCR0 0x24 //clear +#define GPCR1 0x28 +#define GPCR2 0x2c +#define GPCR3 0x124 //clear + +#define GRER0 0x30 //enable rising edge detect +#define GRER1 0x34 +#define GRER2 0x38 +#define GRER3 0x130 //enable rising edge detect + +#define GFER0 0x3C //enable falling edge detect +#define GFER1 0x40 +#define GFER2 0x44 +#define GFER3 0x13C //enable falling edge detect + +#define GEDR0 0x48 //edge detect status +#define GEDR1 0x4C +#define GEDR2 0x50 +#define GEDR3 0x148 //edge detect status + +#define GAFR0_L 0x54 //alternate function +#define GAFR0_U 0x58 +#define GAFR1_L 0x5C +#define GAFR1_U 0x60 +#define GAFR2_L 0x64 +#define GAFR2_U 0x68 +#define GAFR3_L 0x6c +#define GAFR3_U 0x70 + + +#define UART_RBR 0 //read, DLAB-0 :RECEIVE_BUFFER +#define UART_THR 0 //write, DLAB-0 :TRANSMIT_BUFFER +#define UART_DLL 0 //r/w, DLAB-1 :DIVISOR_LOW +#define UART_IER 4 //r/w, DLAB-0 :INTERRUPT_ENABLE +#define UART_DLH 4 //r/w, DLAB-1 :DIVISOR_HIGH + +#define UART_IIR 8 //read :INTERRUPT_INDENTIFICATION +#define UART_FCR 8 //write :FIFO_CONTROL +#define UART_LCR 0x0c //r/w :LINE_CONTROL +#define UART_MCR 0x10 //r/w :MODEM_CONTROL +#define UART_LSR 0x14 //read :LINE_STATUS +#define UART_MSR 0x18 //read :MODEM_STATUS +#define UART_SPR 0x1c //r/w :SCRATCH_PAD +#define UART_ISR 0x20 //r/w :INFRARED + +//#define IC_BASE 0x40D00000 +#define ICIP 0x00 //IRQ pending status +#define ICMR 0x04 //interrupt controller mask +#define ICLR 0x08 //level, 0 - irq, 1 -fiq +#define ICFP 0x0C //FIQ pending status +#define ICPR 0x10 //all interrupts pending, no mask +#define ICCR 0x14 //0 - ignore ICMR in idle mode, 1 - only unmasked interrupts will awaken processor + + +#define __SKIP 8 +#define ICL1_GPIO0 (8 - __SKIP) +#define ICL1_GPIO1 (9 - __SKIP) +#define ICL1_GPIO2_80 (10 - __SKIP) +#define ICL1_USB (11 - __SKIP) +#define ICL1_PMU (12 - __SKIP) +#define ICL1_I2S (13 - __SKIP) +#define ICL1_AC97 (14 - __SKIP) +#define ICL1_LCD (17 - __SKIP) +#define ICL1_I2C (18 - __SKIP) +#define ICL1_ICP (19 - __SKIP) +#define ICL1_STUART (20 - __SKIP) +#define ICL1_BTUART (21 - __SKIP) +#define ICL1_FFUART (22 - __SKIP) +#define ICL1_MMC (23 - __SKIP) +#define ICL1_SSP (24 - __SKIP) +#define ICL1_DMA (25 - __SKIP) +#define ICL1_OS_TIMER0 (26 - __SKIP) +#define ICL1_OS_TIMER1 (27 - __SKIP) +#define ICL1_OS_TIMER2 (28 - __SKIP) +#define ICL1_OS_TIMER3 (29 - __SKIP) +#define ICL1_RTC_TICK (30 - __SKIP) +#define ICL1_RTC_ALARM_MATCH (31 - __SKIP) + +//#define OS_TIMER_BASE 0x40a00000 +#define OSMR0 0x00 +#define OSMR1 0x04 +#define OSMR2 0x08 +#define OSMR3 0x0c +#define OSCR 0x10 //OS timer Count register, increments at 3.6864 Mhz +#define OSSR 0x14 //OS timer Status Register +#define OWER 0x18 //OS timer Watchdog Match enable register +#define OIER 0x1c + +//3686400 ticks/seconds = 3.6864 ticks/usec = 1 tick/.271267361111 usec +#define TICK_PER_USEC_WHOLE 3 +#define TICK_PER_USEC_FRAC 0xAFB7E910 +////////////////////////////////////////////////////////////////////////////////////////// + +//#define PWR_MANAGER_BASE 0x40F00000 +#define PMCR 0 +#define PSSR 4 +#define PSPR 8 +#define PWER 0x0c +#define PRER 0x10 +#define PFER 0x14 +#define PEDR 0x18 +#define PCFR 0x1c +#define PGSR0 0x20 +#define PGSR1 0x24 +#define PGSR2 0x28 +#define RCSR 0x30 + +#define PSSR_MASK 0x37 +#define RCSR_MASK 0x0f +#define RCSR_SLEEP_RESET 4 + +//#define CLK_MANAGER_BASE 0x41300000 +#define CCCR 0 +#define CKEN 4 +#define OSCC 8 + +//#define MEMORY_CONTROL_BASE 0x48000000 +#define MDCNFG 0 +#define MDREFR 4 +#define MSC0 8 +#define MSC1 0x0c +#define MSC2 0x10 +#define MECR 0x14 +#define SXCNFG 0x1c +#define SXMRS 0x24 +#define MCMEM0 0x28 +#define MCMEM1 0x2c +#define MCATT0 0x30 +#define MCATT1 0x34 +#define MCIO0 0x38 +#define MCIO1 0x3c +#define MDMRS 0x40 +#define BOOT_DEF 0x44 + + +//#define LCD_CONTROL_BASE 0x44000000 +#define LCD_CR0 0 //master enable last +#define LCD_CR1 4 +#define LCD_CR2 8 +#define LCD_CR3 0x0c +#define LCD_FBR0 0x20 //Frame branch register +#define LCD_FBR1 0x24 //Frame branch register +#define LCD_SR 0x38 +#define LCD_INT_ID 0x3c +#define LCD_TMEDS 0x40 //TMED RGB seed +#define LCD_TMEDC 0x44 //TMED control +#define LCD_FDADR0 0x200 //frame descriptor address register +#define LCD_FDADR1 0x210 //frame descriptor address register + +#define LCD_FSADR0 0x204 //frame source address register +#define LCD_FSADR1 0x214 //frame source address register + +#define LCD_FIDR0 0x208 //frame ID register +#define LCD_FIDR1 0x218 //frame ID register + +#define LCD_DCMD0 0x20c //dma command +#define LCD_DCMD1 0x21c //dma command + +#define CRO_LDDALT 26 //LDDALT ;0 selects RGB 555, 1 selects RGB 565 +#define CRO_OUC 25 //OUC ;0 underlays, 1 overlays +#define CR0_CMDIM 24 //CMDIM ;command interrupt mask, 0 - enabled, 1 disabled +#define CR0_RDSTM 23 //RDSTM ;read status interrupt mask, 0 - enabled, 1 disabled +#define CR0_LCDT 22 //LCDT ;LCD Panel Type, 1 - internal frame buffer +#define CR0_IM_OUTPUT_FIFO_UNDERRUN 21 //OUM IM stands for Interrupt Mask +#define CR0_IM_BRANCH 20 //BSM0 +#define CR0_PALETTE_DMA_REQUEST_DELAY 12 //PDD 8 bit field, 0-255 +#define CR0_IM_LCD_QUICK_DISABLE 11 //QDM +#define CR0_DISABLE 10 //DIS +#define CR0_DOUBLE_PIXEL_DATA 9 //DPD +#define CR0_ACTIVE_SELECT 7 //PAS +#define CR0_IM_END_OF_FRAME 6 //EOFM0 +#define CR0_IM_INPUT_FIFO_UNDERRUN 5 //IUM +#define CR0_IM_START_OF_FRAME 4 //SOFM0 +#define CR0_IM_DISABLE_DONE 3 //LDM +#define CR0_DUAL_PANEL_SELECT 2 //SDS +#define CR0_MONOCHROME_SELECT 1 //CMS +#define CR0_ENABLE 0 //ENB + + + + +#define CR1_BEGINNING_OF_LINE_WAIT 24 //8 bit field +1 +#define CR1_END_OF_LINE_WAIT 16 //8 bit field +1 +#define CR1_HORIZONTAL_SYNC_PULSE_WIDTH 10 //6 bit field +1 +#define CR1_PIXELS_PER_LINE 0 //10 bit field +1 + + + +#define CR2_BEGINNING_OF_FRAME_WAIT 24 //8 bit field +#define CR2_END_OF_FRAME_WAIT 16 //8 bit field +#define CR2_VERTICAL_SYNC_PULSE_WIDTH 10 //6 bit field +1 +#define CR2_LINES_PER_PANEL 0 //10 bit field +1 + + +#define CR3_PDFOR 30 +#define CR3_DOUBLE_PCLK 27 +#define CR3_BITS_PER_PIXEL 24 //3 bit field +//0 - 1 bit +//1 - 2 bits +//2 - 4 bits +//3 - 8 bits +//4 - 16 bits, +//5-7 reserved +#define CR3_BIAS_POLARITY 23 +#define CR3_PCLK_POLARITY 22 +#define CR3_LCLK_POLARITY 21 +#define CR3_FCLK_POLARITY 20 +#define CR3_API 16 //4 bits field, ac bias transitions per interrupt, 0 disable +#define CR3_ACBIAS_TOGGLE 8 //8 bit field +1 +#define CR3_PCLK_DIVISOR 0 //8 bit field +1 + + + +#define FBR_BRANCH_INT 1 +#define FBR_BRANCH 0 + + +#define SR_MISSED_INT 10 +#define SR_BRANCH_INT 9 +#define SR_END_OF_FRAME_INT 8 +#define SR_QUICK_DISABLE_INT 7 +#define SR_OUTPUT_FIFO_UNDERRUN 6 +#define SR_INPUT_FIFO_UNDERRUN0 5 +#define SR_INPUT_FIFO_UNDERRUN1 4 +#define SR_ACBIAS_COUNT_INT 3 +#define SR_BUS_ERROR 2 +#define SR_START_OF_FRAME 1 +#define SR_DISABLE_DONE 0 + +#define TMEDS_BLUE 16 //8 bit field +#define TMEDS_GREEN 8 //8 bit field +#define TMEDS_RED 0 //8 bit field + + +#define TMEDC_MATRIX2_SELECT 14 +#define TMEDC_RESERVED 12 //2 bit field +#define TMEDC_HORIZONTAL_BEAT_SUPPRESSION 8 //4 bit field +#define TMEDC_VERTICAL_BEAT_SUPPRESSION 4 //4 bit field +#define TMEDC_FRAME_NUMBER_ADJUST_EN 3 +#define TMEDC_COLOR_OFFSET_ADJUST_EN 2 +#define TMEDC_FRAME_NUMBER_ADJUST_MATRIX2 1 +#define TMEDC_COLOR_OFFSET_ADJUST_MATRIX2 0 + + +#define DCMD_PALETTE 26 +#define DCMD_START_OF_FRAME_INTERRUPT 22 +#define DCMD_END_OF_FRAME_INTERRUPT 21 +#define DCMD_LENGTH 0 //21 bit field + + +#define FDESC_FDADR 0 +#define FDESC_FSADR 4 +#define FDESC_FIDR 8 +#define FDESC_DCMD 0x0c + +#define PSR_MODE_MASK 0x1f +#define PSR_MODE_USER 0x10 +#define PSR_MODE_FIQ 0x11 +#define PSR_MODE_IRQ 0x12 +#define PSR_MODE_SVC 0x13 +#define PSR_MODE_DEBUG 0x15 +#define PSR_MODE_ABORT 0x17 +#define PSR_MODE_UNDEF 0x1b +#define PSR_MODE_SYSTEM 0x1f +#define PSR_NOINTS_MASK 0xc0 + +#define FUNC_REQ_GL 0 +#define FUNC_REQ_DLW 1 +#define FUNC_REQ_GAME 2 //not specifically referenced +#define FUNC_REQ_MAC 3 +#define FUNC_REQ_WAKEUP 4 +#define FUNC_REQ_PIC 5 diff -u -r --new-file u-boot-1.1.2/include/asm-arm/arch-pxa/pxaLcd2.h u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaLcd2.h --- u-boot-1.1.2/include/asm-arm/arch-pxa/pxaLcd2.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaLcd2.h 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,78 @@ +#include "pxaLcd.h" +#define DA320X240 0 +#define DA640X240 1 +#define DA800X480 2 +#define DA640X480 3 +#define DA240X320 4 +#define DA800X600 5 +#define DA1024X768 6 +#define DP480X320 7 +#define DP320X240 8 +#define DL122X32 9 +#define UNKNOWN 0xcc + +#ifdef __ARMASM + GBLS DEF_P +#endif + +#if DISPLAY_TYPE==DA320X240 //5.7 inch display +#define DEF_P DA320X240_P +#define DEF_DISPLAY_INDEX 0 +#else +#if DISPLAY_TYPE==DA640X240 //6.2 inch display +#define DEF_P DA640X240_P +#define DEF_DISPLAY_INDEX 1 +#else +#if DISPLAY_TYPE==DA800X480 //7 or 9 inch display +#define DEF_P DA800X480_P +#define DEF_DISPLAY_INDEX 2 +#else +#if DISPLAY_TYPE==DA640X480 //10.4 inch display +#define DEF_P DA640X480_P +#define DEF_DISPLAY_INDEX 3 +#else +#if DISPLAY_TYPE==DA240X320 //3.5 inch display +#define DEF_P DA240X320_P +#define DEF_DISPLAY_INDEX 4 +#else +#if DISPLAY_TYPE==DA800X600 +#define DEF_P DA800X600_P +#define DEF_DISPLAY_INDEX 5 +#else +#if DISPLAY_TYPE==DA1024X768 +#define DEF_P DA1024X768_P +#define DEF_DISPLAY_INDEX 6 +#else +#if DISPLAY_TYPE==DP480X320 //5.7 inch display +#define DEF_P DP480X320_P +#define DEF_DISPLAY_INDEX 7 +#else +#if DISPLAY_TYPE==DP320X240 //5.7 inch display +#define DEF_P DP320X240_P +#define DEF_DISPLAY_INDEX 8 +#else +#if DISPLAY_TYPE==DL122X32 +#define DEF_P DL122X32_P +#define DEF_DISPLAY_INDEX 9 +#else +#if DISPLAY_TYPE==UNKNOWN +#define DEF_P DA320X240_P +#define DEF_DISPLAY_INDEX 0xcc + +#else +#define DEF_P DA320X240_P +#define DEF_DISPLAY_INDEX 0 +#warning "No display selected, defaulting to DA320X240" + +#endif //0xcc +#endif //9 +#endif //8 +#endif //7 +#endif //6 +#endif //5 +#endif //4 +#endif //3 +#endif //2 +#endif //1 +#endif //0 + diff -u -r --new-file u-boot-1.1.2/include/asm-arm/arch-pxa/pxaLcd.h u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaLcd.h --- u-boot-1.1.2/include/asm-arm/arch-pxa/pxaLcd.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaLcd.h 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,79 @@ +#include "platformTypes.h" +#define WINCE 1 +#define LINUX 2 +#define GAME 3 + +#define PXAFB_BPP 16 + +#define LCD_PANEL 0 +#define CRT 1 + +//pixel clock frequency = LCLK / (2*(PCD+1)) +#if (PLATFORM_TYPE==HALOGEN) +#define __BPP 18 +#define BPP_FORMAT 6 +#define PDFOR 3 +#define BYTES_PER_PIXEL 3 +#else +#define __BPP 16 +#define BPP_FORMAT 4 +#define PDFOR 0 +#define BYTES_PER_PIXEL 2 +#endif + +// **************************************************************************** +// This is where different display settings reside +// xres,xsyncWidth,xbegin,xend, yres,ysyncWidth,ybegin,yend, enable,unscramble,rotate,active,bpp,clkdiv,type +//#define DA320X240_P 320, 64, 34, 1, 240, 20, 8, 3, 1,0,0,1,PXAFB_BPP,4,LCD_PANEL //0 +#define DA320X240_P 320, 64, 34, 11, 240, 5, 8, 3, 1,0,0,1,PXAFB_BPP,4,LCD_PANEL //0 + +#define DA640X240_P 640, 64, 34, 1, 240, 20, 8, 3, 1,1,0,1,PXAFB_BPP,2,LCD_PANEL //1 +#define DA800X480_P 800, 64, 34, 1, 480, 20, 8, 3, 1,1,0,1,PXAFB_BPP,2,LCD_PANEL //2 +#define DA640X480_P 640, 64, 34,105, 480, 20, 8,14, 1,1,0,1,PXAFB_BPP,2,LCD_PANEL //3 +#define DA240X320_P 240, 64, 34, 1, 320, 20, 8, 3, 1,0,1,1,PXAFB_BPP,5,LCD_PANEL //4 +#define DA800X600_P 800,0x9b,0x31,0x69, 600,0x04,0x01,0x17, 1,1,0,1,PXAFB_BPP,2,CRT //5 +//#define DA1024X768_P 1024,0xc8,0x55,0xb4, 768,0x06,0x0b,0x1d, 1,1,0,1,PXAFB_BPP,2,CRT //6 +//#define DA1024X768_P 1024,0xe4,0x3c,0x70, 768,0x0c,0x0b,0x20, 1,1,0,1,PXAFB_BPP,2,CRT //6 +#define DA1024X768_P 1024,0xe4,0x3c,0x70, 768,0x0c,0x0b,0x20, 1,1,0,1,PXAFB_BPP,2,LCD_PANEL //6 +#define DP480X320_P 480, 64, 34, 1, 320,20,8,3, 1,0,0,0,PXAFB_BPP,3,LCD_PANEL //7 +#define DP320X240_P 320, 64, 34, 1, 240,20,8,3, 1,0,0,0,PXAFB_BPP,4,LCD_PANEL //8 +#define DL122X32_P 320, 64, 34, 1, 240,20,8,3, 0,0,0,0,PXAFB_BPP,4,0 //9 + +// ******************************************************************************** +#if (PLATFORM_TYPE==BOUNDARY_OLD_BOARD) +#define MOTHERBOARD_SCRAMBLED +#endif + +//#define CONFIG_UNSCRAMBLE_LCD +#ifdef CONFIG_UNSCRAMBLE_LCD +#if 1 //FL_ACTIVE(DEF_P) //passive cannot swap pin order +#ifdef MOTHERBOARD_SCRAMBLED + +#ifndef DAUGHTERBOARD_UNSCRAMBLE +#define LCD_REORDER_BLUE 15,14, 8, 7, 6 +#define LCD_REORDER_GREEN 13,12,11, 5, 4, 3 +#define LCD_REORDER_RED 10, 9, 2, 1, 0 +#endif + +#else +//motherboard is NOT scrambled +#ifdef DAUGHTERBOARD_UNSCRAMBLE +#define LCD_REORDER_BLUE 15,14,13,10, 9 +#define LCD_REORDER_GREEN 8, 4, 3, 2, 12, 11 +#define LCD_REORDER_RED 7, 6, 5, 1, 0 +#endif +#endif //#ifdef MOTHERBOARD_SCRAMBLED +#endif //#if FL_ACTIVE(DEF_P) +#endif //#ifdef CONFIG_UNSCRAMBLE_LCD + +#ifndef LCD_REORDER_BLUE +#if (BYTES_PER_PIXEL==2) +#define LCD_REORDER_BLUE 0,1,2,3,4 +#define LCD_REORDER_GREEN 5,6,7,8,9,10 +#define LCD_REORDER_RED 11,12,13,14,15 +#else +#define LCD_REORDER_BLUE 0,1,2,3,4,5 +#define LCD_REORDER_GREEN 6,7,8,9,10,11 +#define LCD_REORDER_RED 12,13,14,15,16,17 +#endif +#endif diff -u -r --new-file u-boot-1.1.2/include/asm-arm/arch-pxa/pxaMacro2.h u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaMacro2.h --- u-boot-1.1.2/include/asm-arm/arch-pxa/pxaMacro2.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaMacro2.h 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,540 @@ +#include "pxaMacro.h" +// ************************************************************************************************ +// ************************************************************************************************ + +//In: c-0 try 64meg, c-1 try 32meg +// or if 16 bit mode +// c-0 try 32meg, c-1 try 16meg +//Out: z-0 if 16 bit mode +.macro InitRam rBase,rTemp + BigMov \rBase,MEMORY_CONTROL_BASE + ldr \rTemp,[\rBase,#BOOT_DEF] + tst \rTemp,#1 //bit 0 - 1 means 16 bit mode + BigMov \rTemp,M64_MDCNFG_VAL + BigEor2Cs \rTemp,(M64_MDCNFG_VAL)^(M32_MDCNFG_VAL) +#if (!(PLATFORM_TYPE==NEONB)) && (!(PLATFORM_TYPE==HALOGEN)) + BigOrr2Ne \rTemp,(1<<2) //select 16 bit width +#endif + str \rTemp,[\rBase,#MDCNFG] + + mov \rTemp,#0 + nop //pxa270 may need this for some reason, depending upon instruction alignment + str \rTemp,[\rBase,#MDMRS] + + + BigMov \rTemp,M64_MDREFR_VAL + BigEor2Cs \rTemp,(M64_MDREFR_VAL)^(M32_MDREFR_VAL) + str \rTemp,[\rBase,#MDREFR] +.endm + + +//In: z-1 - c-0 try 64meg, c-1 try 32meg +// z-0 - c-0 try 32meg, c-1 try 16meg +//out: rTemp - memory size +.macro CheckRam rBase,rTemp,rTemp2 + // Issue read requests to disabled bank to start refresh + BigMov \rBase,MEM_START+0x0C000000 + ldr \rTemp, [\rBase] + mov \rTemp,#M32_MEM_SIZE + movcc \rTemp,#M64_MEM_SIZE +#if (!(PLATFORM_TYPE==NEONB)) && (!(PLATFORM_TYPE==HALOGEN)) + movne \rTemp,\rTemp,LSR #1 +#endif + BigMov \rBase,MEM_START +#if 1 + mov \rTemp2,#0x24<<2 //0x24 seems to work, but keep it safe +81: sub \rTemp2,\rTemp2,#1 + str \rTemp2,[\rBase] + movs \rTemp2,\rTemp2 //don't affect carry flag + bne 81b +#endif + str \rTemp,[\rBase] + str \rBase,[\rBase,\rTemp,LSR #1] + ldr \rTemp2,[\rBase] + movcs \rTemp2,\rTemp //if 2nd time through, force match + cmp \rTemp2,\rTemp +#if 1 + strne \rTemp2,[\rBase,#4] +// teq \rTemp2,\rTemp2 +#endif +.endm + +#define tEHEL 0 //R14 +#define tAPA 3 //r15 25ns/10ns rounded up + +#define RDFSelect 13 //R2 : tAVQV : 110ns/10ns = 11; 11-1=10=RDF +//#define RDFSelect 10 //R2 : tAVQV : 110ns/10ns = 11; 11-1=10=RDF + //0-11 map to 0-11 + //12 -> 13, 13 ->15, 14->18, 15->23 + +//#if (PLATFORM_TYPE==GAME_CONTROLLER_PLAITED_A1) +#if (PLATFORM_TYPE==GAME_CONTROLLER_PLAITED_A1)||(PLATFORM_TYPE==GAME_CONTROLLER)||(PLATFORM_TYPE==GAME_WITH_SMC) +#define BurstSelect 0 //if plaited bug, burst mode will no longer work. +#else +#define BurstSelect 2 //0->nonburst,1->SRAM,2->burst of4, 3->burst of 8, 4->variable latency i/o +#endif + + +#if (PLATFORM_TYPE==NEONB) +//access time 70ns, 25ns after CS data becomes valid +// RRR RDN RDF RBW RTX +// gap between Address to +// 1-fast chip selects data valid +// 0-slow recovery 2nd burst access 1st access delay 16-bit bus non-burst(0), sram(1), 4cycle(2), 8cycle(3), VLIO(4) +#define CS0_MSC (1<<15)+ (1<<12)+ (7<<8)+ ((7-1)<<4)+ 0 +#define CS1_MSC (1<<15)+(((tEHEL+1)>>1)<<12)+((tAPA-1)<<8)+ (RDFSelect<<4)+ (BurstSelect) //fast device +#else +#define CS0_MSC (1<<15)+(((tEHEL+1)>>1)<<12)+((tAPA-1)<<8)+ (RDFSelect<<4)+ (BurstSelect) //fast device +#define CS1_MSC (1<<15)+ (3<<12)+ (2<<8)+ ((3-1)<<4)+ (1<<3) + 4 //SMC chip +//#define CS1_MSC (1<<15)+ (6<<12)+ ((11-1)<<8)+ ((4-1)<<4)+ (1<<3) + 4 //SMC chip +#endif + +.macro InitCS0_CS1 rBase,rTemp + BigMov \rBase,MEMORY_CONTROL_BASE + ldr \rTemp,[\rBase,#BOOT_DEF] + tst \rTemp,#1 //bit 0 - 1 means 16 bit mode + BigMov \rTemp,(CS0_MSC)|((CS1_MSC)<<16) +/////// BigMov \rTemp,0x7ff07ff0 + orrne \rTemp,\rTemp,#1<<3 //16 bit bus + str \rTemp,[\rBase,#MSC0] +.endm + + +.macro InitMemory rBase,rTemp,rTemp2 + cmp pc,#MEM_START + bcs 92f //exit if running from ram +#if 0 //1 to force smaller memory + subs \rTemp,\rTemp,\rTemp //set carry flag +#endif + +1: + InitRam \rBase, \rTemp //out: \rBase - MEMORY_CONTROL_BASE + +#if (PLATFORM_TYPE==BOUNDARY_OLD_BOARD) +#define CHIP_MODE 0 //don't use VIO_READY +#else +#define CHIP_MODE 4 //gp18 is VIO_READY +#endif + +// RRR RDN RDF RBW RTX +// gap between Address to +// 1-fast chip selects data valid +// 0-slow recovery 2nd burst access 1st access delay 16-bit bus non-burst(0), sram(1), 4cycle(2), 8cycle(3), VLIO(4) +#if 1 +#define CS2_MSC (1<<15)+ (4<<12)+ ((6-2)<<8)+ ((4-1)<<4)+ (1<<3) + CHIP_MODE //for USB dma +//#define CS2_MSC (1<<15)+ (7<<12)+ ((16-1)<<8)+ ((16-1)<<4)+ (1<<3) + CHIP_MODE //for USB dma + +// vlio min 2 vlio min 3 +#if (PLATFORM_TYPE==NEON) || (PLATFORM_TYPE==NEONB) +#define CS3_MSC (1<<15)+ (1<<12)+ (2<<8)+ ((4-1)<<4)+ (0<<3) + 4 //SM501 +#define CS4_MSC (1<<15)+ (3<<12)+ (2<<8)+ ((4-1)<<4)+ (0<<3) + 4 //SMC chip +#else +#if (PLATFORM_TYPE==HALOGEN) +#define CS3_MSC (1<<15)+ (1<<12)+ (2<<8)+ ((4-1)<<4)+ (0<<3) + 4 //NC +#define CS4_MSC (1<<15)+ (3<<12)+ (2<<8)+ ((5-1)<<4)+ (0<<3) + 4 //SMC chip +#else +#define CS3_MSC (1<<15)+ (4<<12)+ ((6-2)<<8)+ ((4-1)<<4)+ (1<<3) + CHIP_MODE //for USB dma +//#define CS3_MSC (1<<15)+ (7<<12)+ ((16-1)<<8)+ ((16-1)<<4)+ (1<<3) + CHIP_MODE //for USB dma +#define CS4_MSC (1<<15)+ (6<<12)+ ((11-1)<<8)+ ((4-1)<<4)+ (1<<3) + CHIP_MODE //for USB IO +#endif +#endif + +#define CS5_MSC (0<<15)+ (7<<12)+ ((8-1)<<8)+ ((8-1)<<4)+ (1<<3) + (0) //for USB IO delay after CMD write +#else +#define CS2_MSC (1<<15)+ (7<<12)+ ((16-1)<<8)+ ((16-1)<<4)+ (1<<3) + CHIP_MODE //for USB dma +#define CS3_MSC (1<<15)+ (7<<12)+ ((16-1)<<8)+ ((16-1)<<4)+ (1<<3) + CHIP_MODE //for USB dma +#define CS4_MSC (1<<15)+ (7<<12)+ ((16-1)<<8)+ ((16-1)<<4)+ (1<<3) + CHIP_MODE //for USB IO +#define CS5_MSC (0<<15)+ (7<<12)+ ((16-1)<<8)+ ((16-1)<<4)+ (1<<3) + (0) //for USB IO delay after CMD write +#endif + BigMov \rTemp,(CS2_MSC)|((CS3_MSC)<<16) + str \rTemp,[\rBase,#MSC1] + BigMov \rTemp,(CS4_MSC)|((CS5_MSC)<<16) + str \rTemp,[\rBase,#MSC2] + + + +#define PCMCIA_MEM_SETUP_ADDRESS 5 //0-127 +#define PCMCIA_MEM_COMMAND_CODE 3 //0-31 +#define PCMCIA_MEM_HOLD_ADDRESS 2 //0-63 + BigMov \rTemp,(PCMCIA_MEM_HOLD_ADDRESS<<14)+(PCMCIA_MEM_COMMAND_CODE<<7)+(PCMCIA_MEM_SETUP_ADDRESS<<0) + str \rTemp,[\rBase,#MCMEM0] + str \rTemp,[\rBase,#MCMEM1] +#define PCMCIA_ATT_SETUP_ADDRESS 5 //0-127 +#define PCMCIA_ATT_COMMAND_CODE 3 //0-31 +#define PCMCIA_ATT_HOLD_ADDRESS 2 //0-63 + BigMov \rTemp,(PCMCIA_ATT_HOLD_ADDRESS<<14)+(PCMCIA_ATT_COMMAND_CODE<<7)+(PCMCIA_ATT_SETUP_ADDRESS<<0) + str \rTemp,[\rBase,#MCATT0] + str \rTemp,[\rBase,#MCATT1] +#define PCMCIA_IO_SETUP_ADDRESS 5 //0-127 +#define PCMCIA_IO_COMMAND_CODE 3 //0-31 +#define PCMCIA_IO_HOLD_ADDRESS 2 //0-63 + BigMov \rTemp,(PCMCIA_IO_HOLD_ADDRESS<<14)+(PCMCIA_IO_COMMAND_CODE<<7)+(PCMCIA_IO_SETUP_ADDRESS<<0) + str \rTemp,[\rBase,#MCIO0] + str \rTemp,[\rBase,#MCIO1] + mov \rTemp,#2 + str \rTemp,[\rBase,#MECR] + + CheckRam \rBase, \rTemp, \rTemp2 + cmpne \rTemp,#0x0 //set carry flag, keep z-0 (memory size!=0) + bne 1b +92: +.endm + +// ******************************************************************************************* +// ******************************************************************************************* +// ******************************************************************************************* +// ******************************************************************************************* +#define CKEN_PWM0 0 +#define CKEN_PWM1 1 +#define CKEN_AC97 2 +#define CKEN_SSP 3 +#define CKEN_HWUART 4 +#define CKEN_STUART 5 +#define CKEN_FFUART 6 +#define CKEN_BTUART 7 +#define CKEN_I2S 8 +#define CKEN_USB 11 +#define CKEN_MMC 12 +#define CKEN_FICP 13 +#define CKEN_I2C 14 +#define CKEN_LCD 16 + +#if (PLATFORM_TYPE==NEON) || (PLATFORM_TYPE==BD2003) || (PLATFORM_TYPE==BOUNDARY_OLD_BOARD) || (PLATFORM_TYPE==OLD_GAME_CONTROLLER) || (PLATFORM_TYPE==HALOGEN) +#define __ENABLED_BTUART_MASK (1< 2 clks + // tRAS_clk= 4.47899 -> 5 clks + // tRC_clk= 6.46966 -> 7 clks + //2 : *32 = 8.47711 ns, 117.96 MHz + // tRP_clk = tRCD_clk= 2.35929 -> 3 clks + // tRAS_clk=5.30841 -> 6 + // tRC_clk =7.66771 -> 8 clks + //3 : *36 = 7.5352 ns, 132.71 MHz + // tRP_clk = tRCD_clk= 2.65421 -> 3 clks + // tRAS_clk=5.97197 -> 6 + // tRC_clk = 8.62618 -> 9 clks + //4 : *40 = 6.78168ns, 147.46 MHz + // tRP_clk = tRCD_clk= 2.94912 -> 3 clks + // tRAS_clk=6.63522 -> 7 + // tRC_clk = 9.58465 -> 10 clks + //5 : *45 = 6.02816ns, 165.89 MHz + // tRP_clk = tRCD_clk= 3.31776 -> 4 clks + // tRAS_clk=7.46496 -> 8 + // tRC_clk = 10.7827 -> 11 clks +//MSelect +//1 : *1 +//2 : *2 + +//NSelect +//2 : *1; +//3 : *1.5; +//4 : *2; +//6 : *3 + +#if (CPU_CLOCK==100) +#define MSelect 1 //1 : *1 100MHz +#define NSelect 4 //4 : *2; turbo 200 MHZ +#define FCS_MASK 2 // turbo off +#else +#if (CPU_CLOCK==200) +#define MSelect 2 //2 : *2 200 MHz +#define NSelect 3 //3 : *1.5; turbo 300 MHZ +#define FCS_MASK 2 // turbo off +#else +#if (CPU_CLOCK==300) +#define MSelect 2 //2 : *2 200 MHz +#define NSelect 3 //3 : *1.5; turbo 300 MHZ +#define FCS_MASK 3 // turbo on +#else +#if (CPU_CLOCK==400) + +#if 0 //only pxa255 runs with 200Mhz internal bus, pxa250 doesn't +#define MSelect 2 //2 : *2 200 MHz +#define NSelect 4 //4 : *2; turbo 400 MHZ +#define FCS_MASK 3 // turbo on +#else +#define MSelect 3 //2 : *4 400 MHz +#define NSelect 2 //4 : *1; turbo 400 MHZ +#define FCS_MASK 2 // turbo off +#endif + +#else +//////#WARNING CPU_CLOCK selection not made +#endif +#endif +#endif +#endif + + BigMov \rTemp,(NSelect<<7)+(MSelect<<5)+(LSelect) + str \rTemp,[\rBase,#CCCR] + + BigMov \rTemp,(1<>8) + str \rTemp,[\rBase,#UART_DLH] + + mov \rTemp,#3 //8-bit characters + str \rTemp,[\rBase,#UART_LCR] + + mov \rTemp,#0xc1 //enable fifo, 32 byte level + str \rTemp,[\rBase,#UART_FCR] + + mov \rTemp,#0x40 //UUE- UART unit enable + str \rTemp,[\rBase,#UART_IER] +.endm +.macro InitGPIO rBase,rTemp + BigMov \rBase,GPIO_BASE + + BigMov \rTemp,~SRVAL0 + str \rTemp,[\rBase,#GPCR0] + mvn \rTemp,\rTemp + str \rTemp,[\rBase,#GPSR0] + + BigMov \rTemp,~SRVAL32 + str \rTemp,[\rBase,#GPCR1] + mvn \rTemp,\rTemp + str \rTemp,[\rBase,#GPSR1] + + BigMov \rTemp,~SRVAL64 + str \rTemp,[\rBase,#GPCR2] + mvn \rTemp,\rTemp + str \rTemp,[\rBase,#GPSR2] +#if (PLATFORM_TYPE==HALOGEN) + BigMov \rTemp,~SRVAL96 + str \rTemp,[\rBase,#GPCR3] + mvn \rTemp,\rTemp + str \rTemp,[\rBase,#GPSR3] +#endif +//////// + BigMov \rTemp,DRVAL0 + str \rTemp,[\rBase,#GPDR0] + + BigMov \rTemp,DRVAL32 + str \rTemp,[\rBase,#GPDR1] + + BigMov \rTemp,DRVAL64 + str \rTemp,[\rBase,#GPDR2] +#if (PLATFORM_TYPE==HALOGEN) + BigMov \rTemp,DRVAL96 + str \rTemp,[\rBase,#GPDR3] +#endif +//////// + BigMov \rTemp,AFVAL0 + str \rTemp,[\rBase,#GAFR0_L] + BigMov \rTemp,AFVAL16 + str \rTemp,[\rBase,#GAFR0_U] + + BigMov \rTemp,AFVAL32 + str \rTemp,[\rBase,#GAFR1_L] + BigMov \rTemp,AFVAL48 + str \rTemp,[\rBase,#GAFR1_U] + + BigMov \rTemp,AFVAL64 + str \rTemp,[\rBase,#GAFR2_L] + BigMov \rTemp,AFVAL80 + str \rTemp,[\rBase,#GAFR2_U] +#if (PLATFORM_TYPE==HALOGEN) + BigMov \rTemp,AFVAL96 + str \rTemp,[\rBase,#GAFR3_L] + BigMov \rTemp,AFVAL112 + str \rTemp,[\rBase,#GAFR3_U] +#endif + BigMov \rBase,PWR_MANAGER_BASE + mov \rTemp,#0x30 + str \rTemp,[\rBase,#PSSR] +.endm + + + +.macro TransMacro val + BigMov r12,UART_BASE +91: + BigMov r0,\val + bl Transmit + b 91b +.endm +// ******************************************************************************************* +.macro InitMMU rBase,rTemp +// mov r0,#PSR_NOINTS_MASK+PSR_MODE_SVC +// msr cpsr_c,r0 +// ******************************************************************** +// Disable the MMU and gang regardless of why we are here. + BigMov \rBase,0x2001 //; enable access to all coprocessors + CP15_CP_ACCESS mcr,\rBase + CPWAIT \rBase + + mov \rBase,#0x00000078 //; get a zero to turn things off (must write bits[6:3] as 1's) + CP15_CONTROL mcr,\rBase //; Turn Off MMU, I&D Caches, WB. + CPWAIT \rBase + + mov \rBase,#0x00000000 //; get a zero to turn things off + cmp pc,#MEM_START + CP15_TLB_INVAL_BOTH mcr,\rBase //; flush (invalidate) I/D tlb's + CP15_CF_INVAL_BTB mcr,\rBase //invalidate Branch target buffer + CP15_CF_INVAL_D mcr,\rBase + CP15_CF_INVAL_I mcrcs,\rBase //I might be running from cache only, invalidate if in ram + CP15_CF_DRAIN mcr,\rBase //; Drain the write buffer + nop + nop + nop + mvn r0, #0 //; grant manager access to all domains + CP15_DACR mcr,\rBase +.endm + +//out rTemp1 reset reason +.macro InitPWR rBase,rTemp1,rTemp2 + BigMov \rBase,PWR_MANAGER_BASE +// ******************************************************************** + ldr \rTemp1,[\rBase,#RCSR] // Read & Init Reset Cause bits in RCSR. + and \rTemp1,\rTemp1,#RCSR_MASK // extract the reset cause bits + str \rTemp1,[\rBase,#RCSR] // clear the reset cause bits (they're sticky) +// ******************************************************************** +// Read and store PSSR, too - it will be reset later, after GPIOs are initialized. +// Unclear when we'll need this information, but don't throw a good status away. +// ldr \rTemp2, [\rBase,#PSSR] +// extract the reset cause bits +// and \rTemp2,\rTemp2,#PSSR_MASK //; r12 now holds the conditioned PSSR +// orr \rTemp1,\rTemp1,\rTemp2,lsl #16 //; R10 now has RCSR in lower half and PSSR in upper. +// ******************************************************************** +// Reasons for being here: +// 1) Hard Reset +// 2) Wake from Sleep +// 3) GPIO Reset +// 4) Watchdog Reset +// 5) Eboot Handoff +// If Sleep_Reset: reinit all but RTC, PWRMAN, CLKS (except cp14)... so reinit: OST, INTC, GPIO +// If GPIO_Reset: reinit all but MEMC.Config, RTC, CLKS (except cp14)... so reinit: treat like sleep +// If Watchdog_Reset: reinit all but RTC.RTTR, CLK.OSCC... so reinit: treat like a hard reset, minus OSCC and RTTR init. +// If Hard_Reset: reinit all +.endm + +// ******************************************************************************************* +// ******************************************************************************************* + .list diff -u -r --new-file u-boot-1.1.2/include/asm-arm/arch-pxa/pxaMacro3.h u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaMacro3.h --- u-boot-1.1.2/include/asm-arm/arch-pxa/pxaMacro3.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxaMacro3.h 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,74 @@ +#include "pxaLcd2.h" +#include "pxaMacro2.h" +.macro DEFINE_SCREEN_WIDTH xres,xsyncWidth,xbegin,xend, yres,ysyncWidth,ybegin,yend, enable,unscramble,rotate,active,bpp,clkdiv,type + .ifdef __ARMASM + GBLA SCREEN_WIDTH + .endif + .set SCREEN_WIDTH,\xres +.endm + +.macro DEFINE_SCREEN_HEIGHT xres,xsyncWidth,xbegin,xend, yres,ysyncWidth,ybegin,yend, enable,unscramble,rotate,active,bpp,clkdiv,type + .ifdef __ARMASM + GBLA SCREEN_HEIGHT + .endif + .set SCREEN_HEIGHT,\yres +.endm + + DEFINE_SCREEN_WIDTH DEF_P + DEFINE_SCREEN_HEIGHT DEF_P + +.macro CR0_INIT_VAL reg,xres,xsyncWidth,xbegin,xend, yres,ysyncWidth,ybegin,yend, enable,unscramble,rotate,active,bpp,clkdiv,type + BigMov \reg,(\enable<>M64_numRowAddrBits)>>5) //(# of cycles/ms * # of ms for entire refresh period)/ # of rows/refresh period /32 +#define M64_MDCNFG_VAL 1+((numColumnAddrBits-8)<<3)+((M64_numRowAddrBits-11)<<5)+((numBankAddrBits-1)<<7)+(ClkSelect<<8)+(1<<11)+(M64_SA1111_mask) //DLATCH0, latch return data with return clock +#define M64_MDREFR_VAL (1<<16)+(1<<15)+(M64_DRI_cnt&0xfff) //don't set bit 20: APD (buggy), bit 16: K1RUN, 15:E1PIN +//#define M64_MDREFR_VAL (1<<20)+(1<<16)+(1<<15)+(M64_DRI_cnt&0xfff) //20: APD, bit 16: K1RUN, 15:E1PIN +// 13 9 2 2 (4bytes per address)=2**26=64 MB +#define M64_MEM_SIZE (1<<(M64_numRowAddrBits+numColumnAddrBits+numBankAddrBits+2)) +#define M64_MEM_END ((MEM_START)+M64_MEM_SIZE) + +//32 meg option +#define M32_numRowAddrBits 12 //for MT48LC8M16A2 - 75 B +#define M32_SA1111_mask 0 +#define M32_DRI_cnt (((99530*64)>>M32_numRowAddrBits)>>5) //(# of cycles/ms * # of ms for entire refresh period)/ # of rows/refresh period /32 +#define M32_MDCNFG_VAL 1+((numColumnAddrBits-8)<<3)+((M32_numRowAddrBits-11)<<5)+((numBankAddrBits-1)<<7)+(ClkSelect<<8)+(1<<11)+(M32_SA1111_mask) //DLATCH0, latch return data with return clock +#define M32_MDREFR_VAL (1<<16)+(1<<15)+(M32_DRI_cnt&0xfff) //don't set bit 20: APD (buggy), bit 16: K1RUN, 15:E1PIN +// 12 9 2 2 (4bytes per address)=2**25=32 MB +#define M32_MEM_SIZE (1<<(M32_numRowAddrBits+numColumnAddrBits+numBankAddrBits+2)) +#define M32_MEM_END ((MEM_START)+M32_MEM_SIZE) +// ******************************************************************************************* +//out: rTemp - memory size +.macro CalcMemSize rBase,rTemp,mem_control_base + BigMov \rBase,\mem_control_base + ldr \rTemp,[\rBase,#MDCNFG] + movs \rTemp,\rTemp,LSR #2+1 //bit 2 - 1 means 16 bit mode, 0 means 32 bit mode, mov to carry flag + tst \rTemp,#1<<(5-3) //is number of row address bits 12 or 13 ? + moveq \rTemp,#M64_MEM_SIZE + movne \rTemp,#M32_MEM_SIZE + movcs \rTemp,\rTemp,LSR #1 //half as much if 16 bit mode +.endm + + +#define CH_NULL 0x00 +#define CH_BACKSPACE 0x08 +#define CH_LF 0x0a +#define CH_CR 0x0d +#define CH_CAN 0x18 +#define CH_SPACE 0x20 //" " +#define CH_EXCLAMATION 0x21 //! +#define CH_DQUOTE 0x22 //" +#define CH_POUND 0x23 //# +#define CH_DOLLAR 0x24 //$ +#define CH_PERCENT 0x25 //% +#define CH_AMPERSAND 0x26 //& +#define CH_SQUOTE 0x27 //' +#define CH_OPEN_PAREN 0x28 //( +#define CH_CLOSE_PAREN 0x29 //) +#define CH_ASTERISK 0x2a //* +#define CH_PLUS 0x2b //+ +#define CH_COMMA 0x2c //, +#define CH_HYPHEN 0x2d //- +#define CH_MINUS 0x2d //- +#define CH_PERIOD 0x2e //. +#define CH_FSLASH 0x2f // / +#define CH_0 0x30 +#define CH_1 0x31 +#define CH_2 0x32 +#define CH_3 0x33 +#define CH_4 0x34 +#define CH_5 0x35 +#define CH_6 0x36 +#define CH_7 0x37 +#define CH_8 0x38 +#define CH_9 0x39 +#define CH_COLON 0x3a //: +#define CH_SEMICOLON 0x3b //; +#define CH_LESS_THAN 0x3c //< +#define CH_EQUAL 0x3d //= +#define CH_GREATER_THAN 0x3e //> +#define CH_QUESTION_MARK 0x3f //? +#define CH_AT_SIGN 0x40 //@ + +#define CH_A 0x41 +#define CH_B 0x42 +#define CH_C 0x43 +#define CH_D 0x44 +#define CH_E 0x45 +#define CH_F 0x46 +#define CH_G 0x47 +#define CH_H 0x48 +#define CH_I 0x49 +#define CH_J 0x4a +#define CH_K 0x4b +#define CH_L 0x4c +#define CH_M 0x4d +#define CH_N 0x4e +#define CH_O 0x4f +#define CH_P 0x50 +#define CH_Q 0x51 +#define CH_R 0x52 +#define CH_S 0x53 +#define CH_T 0x54 +#define CH_U 0x55 +#define CH_V 0x56 +#define CH_W 0x57 +#define CH_X 0x58 +#define CH_Y 0x59 +#define CH_Z 0x5a +#define CH_OPEN_SQUARE 0x5b //[ +#define CH_BSLASH 0x5c //\.. +#define CH_CLOSE_SQUARE 0x5d //] +#define CH_CARET 0x5e //^ +#define CH__ 0x5f //_ +#define CH_OPEN_SQUOTE 0x60 //` + +#define CH_a 0x61 +#define CH_b 0x62 +#define CH_c 0x63 +#define CH_d 0x64 +#define CH_e 0x65 +#define CH_f 0x66 +#define CH_g 0x67 +#define CH_h 0x68 +#define CH_i 0x69 +#define CH_j 0x6a +#define CH_k 0x6b +#define CH_l 0x6c +#define CH_m 0x6d +#define CH_n 0x6e +#define CH_o 0x6f +#define CH_p 0x70 +#define CH_q 0x71 +#define CH_r 0x72 +#define CH_s 0x73 +#define CH_t 0x74 +#define CH_u 0x75 +#define CH_v 0x76 +#define CH_w 0x77 +#define CH_x 0x78 +#define CH_y 0x79 +#define CH_z 0x7a +#define CH_OPEN_CURLY 0x7b //{ +#define CH_VERTICAL_BAR 0x7c //| +#define CH_CLOSE_CURLY 0x7d //} +#define CH_TILDE 0x7e //~ +#define CH_DELETE 0x7f + + +.macro STARTUPTEXT + GBLS AreaName + AREA |.astart|,ALIGN=2,CODE +AreaName SETS "|.astart|" +.endm + +.macro DUP count,val + LCLA cnt +cnt SETA $count + WHILE ( cnt<>0) + DCD $val +cnt SETA cnt-1 + WEND +.endm diff -u -r --new-file u-boot-1.1.2/include/asm-arm/arch-pxa/pxa-regs.h u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxa-regs.h --- u-boot-1.1.2/include/asm-arm/arch-pxa/pxa-regs.h 2003-06-27 23:32:42.000000000 +0200 +++ u-boot-1.1.2-neon/include/asm-arm/arch-pxa/pxa-regs.h 2007-08-11 21:07:21.000000000 +0200 @@ -107,6 +107,17 @@ #define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ #define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ #define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ + +#if defined(CONFIG_PXA27X) +#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ +#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ +#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ +#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ +#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ +#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ +#define DCSR_ENRINTR (1 << 9) /* The end of Receive */ +#endif + #define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ #define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ #define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ @@ -156,6 +167,10 @@ #define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ #define DRCMR39 __REG(0x4000019C) /* Reserved */ +#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */ +#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */ +#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */ + #define DRCMRRXSADR DRCMR2 #define DRCMRTXSADR DRCMR3 #define DRCMRRXBTRBR DRCMR4 @@ -424,6 +439,12 @@ #define ISR __REG(0x40301698) /* I2C Status Register - ISR */ #define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ +#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */ +#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */ +#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */ +#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */ +#define PWRISAR __REG(0x40f001A0) /* Power I2C Slave Address Register-ISAR */ + /* ----- Control register bits ---------------------------------------- */ #define ICR_START 0x1 /* start bit */ @@ -460,11 +481,9 @@ /* * Serial Audio Controller */ - - /* FIXME the audio defines collide w/ the SA1111 defines. I don't like these - * short defines because there is too much chance of namespace collision */ - + * short defines because there is too much chance of namespace collision + */ /*#define SACR0 __REG(0x40400000) / Global Control Register */ /*#define SACR1 __REG(0x40400004) / Serial Audio I 2 S/MSB-Justified Control Register */ /*#define SASR0 __REG(0x4040000C) / Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ @@ -711,10 +730,68 @@ #define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */ +#if defined(CONFIG_PXA27X) /* - * Fast Infrared Communication Port + * USB Host Controller */ +#define USBH_BASE 0x4C000000 +#define UHCREV __REG(0x4C000000) +#define UHCHCON __REG(0x4C000004) +#define UHCCOMS __REG(0x4C000008) +#define UHCINTS __REG(0x4C00000C) +#define UHCINTE __REG(0x4C000010) +#define UHCINTD __REG(0x4C000014) +#define UHCHCCA __REG(0x4C000018) +#define UHCPCED __REG(0x4C00001C) +#define UHCCHED __REG(0x4C000020) +#define UHCCCED __REG(0x4C000024) +#define UHCBHED __REG(0x4C000028) +#define UHCBCED __REG(0x4C00002C) +#define UHCDHEAD __REG(0x4C000030) +#define UHCFMI __REG(0x4C000034) +#define UHCFMR __REG(0x4C000038) +#define UHCFMN __REG(0x4C00003C) +#define UHCPERS __REG(0x4C000040) +#define UHCLST __REG(0x4C000044) +#define UHCRHDA __REG(0x4C000048) +#define UHCRHDB __REG(0x4C00004C) +#define UHCRHS __REG(0x4C000050) +#define UHCRHPS1 __REG(0x4C000054) +#define UHCRHPS2 __REG(0x4C000058) +#define UHCRHPS3 __REG(0x4C00005C) +#define UHCSTAT __REG(0x4C000060) +#define UHCHR __REG(0x4C000064) +#define UHCHIE __REG(0x4C000068) +#define UHCHIT __REG(0x4C00006C) + +#define UHCHR_FSBIR (1<<0) +#define UHCHR_FHR (1<<1) +#define UHCHR_CGR (1<<2) +#define UHCHR_SSDC (1<<3) +#define UHCHR_UIT (1<<4) +#define UHCHR_SSE (1<<5) +#define UHCHR_PSPL (1<<6) +#define UHCHR_PCPL (1<<7) +#define UHCHR_SSEP0 (1<<9) +#define UHCHR_SSEP1 (1<<10) +#define UHCHR_SSEP2 (1<<11) + +#define UHCHIE_UPRIE (1<<13) +#define UHCHIE_UPS2IE (1<<12) +#define UHCHIE_UPS1IE (1<<11) +#define UHCHIE_TAIE (1<<10) +#define UHCHIE_HBAIE (1<<8) +#define UHCHIE_RWIE (1<<7) + +#define UHCCOMS_HCR 1 +#define UHCRHS_LPS 1 +#define UHCHR_SSE (1<<5) + +#endif +/* + * Fast Infrared Communication Port + */ #define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ #define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ #define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ @@ -731,7 +808,21 @@ #define RTAR __REG(0x40900004) /* RTC Alarm Register */ #define RTSR __REG(0x40900008) /* RTC Status Register */ #define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ - +#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */ +#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */ +#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */ +#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */ +#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */ +#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */ +#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ +#define RDCR __REG(0x40900010) /* RTC Day Count Register. */ +#define RYCR __REG(0x40900014) /* RTC Year Count Register. */ +#define SWCR __REG(0x40900028) /* Stopwatch Count Register */ +#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */ + +#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */ +#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */ +#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */ #define RTSR_HZE (1 << 3) /* HZ interrupt enable */ #define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ #define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ @@ -831,6 +922,37 @@ /* More handy macros. The argument is a literal GPIO number. */ #define GPIO_bit(x) (1 << ((x) & 0x1f)) + +#ifdef CONFIG_PXA27X + +/* Interrupt Controller */ + +#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ +#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ +#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ + +#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) +#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) +#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) +#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) +#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) +#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) +#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) +#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) + +#define GPLR(x) ((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3) +#define GPDR(x) ((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3) +#define GPSR(x) ((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3) +#define GPCR(x) ((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3) +#define GRER(x) ((((x) & 0x7f) < 96) ? _GRER(x) : GRER3) +#define GFER(x) ((((x) & 0x7f) < 96) ? _GFER(x) : GFER3) +#define GEDR(x) ((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3) +#define GAFR(x) ((((x) & 0x7f) < 96) ? _GAFR(x) : \ + ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U)) +#else + #define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) #define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) #define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) @@ -840,6 +962,8 @@ #define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) #define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) +#endif + /* GPIO alternate function assignments */ #define GPIO1_RST 1 /* reset */ @@ -1038,6 +1162,8 @@ #define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) #define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) +#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT) +#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT) /* * Power Manager @@ -1054,8 +1180,62 @@ #define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ #define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ #define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ +#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */ #define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ +#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ +#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */ +#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */ +#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */ +#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ +#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ +#define PCMD(x) __REG(0x40F00080 + x*4) +#define PCMD0 __REG(0x40F00080 + 0 * 4) +#define PCMD1 __REG(0x40F00080 + 1 * 4) +#define PCMD2 __REG(0x40F00080 + 2 * 4) +#define PCMD3 __REG(0x40F00080 + 3 * 4) +#define PCMD4 __REG(0x40F00080 + 4 * 4) +#define PCMD5 __REG(0x40F00080 + 5 * 4) +#define PCMD6 __REG(0x40F00080 + 6 * 4) +#define PCMD7 __REG(0x40F00080 + 7 * 4) +#define PCMD8 __REG(0x40F00080 + 8 * 4) +#define PCMD9 __REG(0x40F00080 + 9 * 4) +#define PCMD10 __REG(0x40F00080 + 10 * 4) +#define PCMD11 __REG(0x40F00080 + 11 * 4) +#define PCMD12 __REG(0x40F00080 + 12 * 4) +#define PCMD13 __REG(0x40F00080 + 13 * 4) +#define PCMD14 __REG(0x40F00080 + 14 * 4) +#define PCMD15 __REG(0x40F00080 + 15 * 4) +#define PCMD16 __REG(0x40F00080 + 16 * 4) +#define PCMD17 __REG(0x40F00080 + 17 * 4) +#define PCMD18 __REG(0x40F00080 + 18 * 4) +#define PCMD19 __REG(0x40F00080 + 19 * 4) +#define PCMD20 __REG(0x40F00080 + 20 * 4) +#define PCMD21 __REG(0x40F00080 + 21 * 4) +#define PCMD22 __REG(0x40F00080 + 22 * 4) +#define PCMD23 __REG(0x40F00080 + 23 * 4) +#define PCMD24 __REG(0x40F00080 + 24 * 4) +#define PCMD25 __REG(0x40F00080 + 25 * 4) +#define PCMD26 __REG(0x40F00080 + 26 * 4) +#define PCMD27 __REG(0x40F00080 + 27 * 4) +#define PCMD28 __REG(0x40F00080 + 28 * 4) +#define PCMD29 __REG(0x40F00080 + 29 * 4) +#define PCMD30 __REG(0x40F00080 + 30 * 4) +#define PCMD31 __REG(0x40F00080 + 31 * 4) + +#define PCMD_MBC (1<<12) +#define PCMD_DCE (1<<11) +#define PCMD_LC (1<<10) +/* FIXME: PCMD_SQC need be checked. */ +#define PCMD_SQC (3<<8) /* currently only bit 8 is changerable, */ + /* bit 9 should be 0 all day. */ +#define PVCR_VCSA (0x1<<14) +#define PVCR_CommandDelay (0xf80) +/* define MACRO for Power Manager General Configuration Register (PCFR) */ +#define PCFR_FVC (0x1 << 10) +#define PCFR_PI2C_EN (0x1 << 6) + +#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ #define PSSR_RDH (1 << 5) /* Read Disable Hold */ #define PSSR_PH (1 << 4) /* Peripheral Control Hold */ #define PSSR_VFS (1 << 2) /* VDD Fault Status */ @@ -1117,14 +1297,29 @@ #define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ #define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ +#if !defined(CONFIG_PXA27X) #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ +#endif #define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ +#define CKEN24_CAMERA (1 << 24) /* Camera Interface Clock Enable */ +#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ +#define CKEN22_MEMC (1 << 22) /* Memory Controller Clock Enable */ +#define CKEN21_MEMSTK (1 << 21) /* Memory Stick Host Controller */ +#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ +#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ +#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ +#define CKEN17_MSL (1 << 17) /* MSL Unit Clock Enable */ #define CKEN16_LCD (1 << 16) /* LCD Unit Clock Enable */ +#define CKEN15_PWRI2C (1 << 15) /* PWR I2C Unit Clock Enable */ #define CKEN14_I2C (1 << 14) /* I2C Unit Clock Enable */ #define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */ #define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */ #define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */ +#if defined(CONFIG_PXA27X) +#define CKEN10_USBHOST (1 << 10) /* USB Host Unit Clock Enable */ +#define CKEN24_CAMERA (1 << 24) /* Camera Unit Clock Enable */ +#endif #define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */ #define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */ #define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */ @@ -1137,6 +1332,7 @@ #define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ #define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ +#if !defined(CONFIG_PXA27X) #define CCCR_L09 (0x1F) #define CCCR_L27 (0x1) #define CCCR_L32 (0x2) @@ -1153,6 +1349,7 @@ #define CCCR_N20 (0x4 << 7) #define CCCR_N25 (0x5 << 7) #define CCCR_N30 (0x6 << 7) +#endif /* * LCD @@ -1164,7 +1361,8 @@ #define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */ #define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ #define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ -#define LCSR __REG(0x44000038) /* LCD Controller Status Register */ +#define LCSR0 __REG(0x44000038) /* LCD Controller Status Register */ +#define LCSR1 __REG(0x44000034) /* LCD Controller Status Register */ #define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */ #define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */ #define TMEDCR __REG(0x44000044) /* TMED Control Register */ @@ -1194,6 +1392,11 @@ #define LCCR0_PDD_S 12 #define LCCR0_BM (1 << 20) /* Branch mask */ #define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ +#if defined(CONFIG_PXA27X) +#define LCCR0_LCDT (1 << 22) /* LCD Panel Type */ +#define LCCR0_RDSTM (1 << 23) /* Read Status Interrupt Mask */ +#define LCCR0_CMDIM (1 << 24) /* Command Interrupt Mask */ +#endif #define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ #define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ @@ -1257,6 +1460,11 @@ #endif #define LCCR3_DPC (1 << 27) /* double pixel clock mode */ +#define LCCR3_PDFOR_0 (0 << 30) +#define LCCR3_PDFOR_1 (1 << 30) +#define LCCR3_PDFOR_2 (2 << 30) +#define LCCR3_PDFOR_3 (3 << 30) + #define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ #define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \ @@ -1265,7 +1473,7 @@ #define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ #define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \ - (((Bpp) << FShft (LCCR3_BPP))) + ((((Bpp&0x7) << FShft (LCCR3_BPP)))|(((Bpp&0x8)<<26))) #define LCCR3_ACB Fld (8, 8) /* AC Bias */ #define LCCR3_Acb(Acb) /* BAC Bias */ \ @@ -1280,33 +1488,50 @@ #define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ /* active Low */ -#define LCSR_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR_SOF (1 << 1) /* Start of frame */ -#define LCSR_BER (1 << 2) /* Bus error */ -#define LCSR_ABC (1 << 3) /* AC Bias count */ -#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR_OU (1 << 6) /* output FIFO underrun */ -#define LCSR_QD (1 << 7) /* quick disable */ -#define LCSR_EOF (1 << 8) /* end of frame */ -#define LCSR_BS (1 << 9) /* branch status */ -#define LCSR_SINT (1 << 10) /* subsequent interrupt */ - -#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ - -#define LCSR_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR_SOF (1 << 1) /* Start of frame */ -#define LCSR_BER (1 << 2) /* Bus error */ -#define LCSR_ABC (1 << 3) /* AC Bias count */ -#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR_OU (1 << 6) /* output FIFO underrun */ -#define LCSR_QD (1 << 7) /* quick disable */ -#define LCSR_EOF (1 << 8) /* end of frame */ -#define LCSR_BS (1 << 9) /* branch status */ -#define LCSR_SINT (1 << 10) /* subsequent interrupt */ +#define LCSR0_LDD (1 << 0) /* LCD Disable Done */ +#define LCSR0_SOF (1 << 1) /* Start of frame */ +#define LCSR0_BER (1 << 2) /* Bus error */ +#define LCSR0_ABC (1 << 3) /* AC Bias count */ +#define LCSR0_IUL (1 << 4) /* input FIFO underrun Lower panel */ +#define LCSR0_IUU (1 << 5) /* input FIFO underrun Upper panel */ +#define LCSR0_OU (1 << 6) /* output FIFO underrun */ +#define LCSR0_QD (1 << 7) /* quick disable */ +#define LCSR0_EOF0 (1 << 8) /* end of frame */ +#define LCSR0_BS (1 << 9) /* branch status */ +#define LCSR0_SINT (1 << 10) /* subsequent interrupt */ + +#define LCSR1_SOF1 (1 << 0) +#define LCSR1_SOF2 (1 << 1) +#define LCSR1_SOF3 (1 << 2) +#define LCSR1_SOF4 (1 << 3) +#define LCSR1_SOF5 (1 << 4) +#define LCSR1_SOF6 (1 << 5) + +#define LCSR1_EOF1 (1 << 8) +#define LCSR1_EOF2 (1 << 9) +#define LCSR1_EOF3 (1 << 10) +#define LCSR1_EOF4 (1 << 11) +#define LCSR1_EOF5 (1 << 12) +#define LCSR1_EOF6 (1 << 13) + +#define LCSR1_BS1 (1 << 16) +#define LCSR1_BS2 (1 << 17) +#define LCSR1_BS3 (1 << 18) +#define LCSR1_BS4 (1 << 19) +#define LCSR1_BS5 (1 << 20) +#define LCSR1_BS6 (1 << 21) + +#define LCSR1_IU2 (1 << 25) +#define LCSR1_IU3 (1 << 26) +#define LCSR1_IU4 (1 << 27) +#define LCSR1_IU5 (1 << 28) +#define LCSR1_IU6 (1 << 29) #define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ +#if defined(CONFIG_PXA27X) +#define LDCMD_SOFINT (1 << 22) +#define LDCMD_EOFINT (1 << 21) +#endif /* * Memory controller @@ -1369,5 +1594,191 @@ #define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ #define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ +#if defined(CONFIG_PXA27X) -#endif +#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ + +#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ +#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ +#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ +#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ +#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ +#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ +#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ +#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ +#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ + +/* Interrupt Controller */ + +#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ +#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ +#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ + +/* General Purpose I/O */ + +#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ +#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ +#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ +#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ +#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ +#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO <127:96> */ +#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ +#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ +#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ + +/* Core Clock */ + +#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ + +#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ +#define CKEN22_MEMC (1 << 22) /* Memory Controler */ +#define CKEN21_MSHC (1 << 21) /* Memery Stick Host Controller */ +#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ +#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ +#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ +#define CKEN17_MSL (1 << 17) /* MSL Interface Unit Clock Enable */ +#define CKEN15_PWR_I2C (1 << 15) /* PWR_I2C Unit Clock Enable */ +#define CKEN9_OST (1 << 9) /* OS Timer Unit Clock Enable */ +#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */ + +/* Memory controller */ + +#define MDREFR_K0DB4 (1 << 29) /* SDCLK[0] divide by 4 */ + +/* LCD registers */ +#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 4 */ +#define LCCR5 __REG(0x44000014) /* LCD Controller Control Register 5 */ +#define FBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ +#define FBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ +#define FBR2 __REG(0x44000028) /* DMA Channel 2 Frame Branch Register */ +#define FBR3 __REG(0x4400002C) /* DMA Channel 3 Frame Branch Register */ +#define FBR4 __REG(0x44000030) /* DMA Channel 4 Frame Branch Register */ +#define FDADR2 __REG(0x44000220) /* DMA Channel 2 Frame Descriptor Address Register */ +#define FSADR2 __REG(0x44000224) /* DMA Channel 2 Frame Source Address Register */ +#define FIDR2 __REG(0x44000228) /* DMA Channel 2 Frame ID Register */ +#define LDCMD2 __REG(0x4400022C) /* DMA Channel 2 Command Register */ +#define FDADR3 __REG(0x44000230) /* DMA Channel 3 Frame Descriptor Address Register */ +#define FSADR3 __REG(0x44000234) /* DMA Channel 3 Frame Source Address Register */ +#define FIDR3 __REG(0x44000238) /* DMA Channel 3 Frame ID Register */ +#define LDCMD3 __REG(0x4400023C) /* DMA Channel 3 Command Register */ +#define FDADR4 __REG(0x44000240) /* DMA Channel 4 Frame Descriptor Address Register */ +#define FSADR4 __REG(0x44000244) /* DMA Channel 4 Frame Source Address Register */ +#define FIDR4 __REG(0x44000248) /* DMA Channel 4 Frame ID Register */ +#define LDCMD4 __REG(0x4400024C) /* DMA Channel 4 Command Register */ +#define FDADR5 __REG(0x44000250) /* DMA Channel 5 Frame Descriptor Address Register */ +#define FSADR5 __REG(0x44000254) /* DMA Channel 5 Frame Source Address Register */ +#define FIDR5 __REG(0x44000258) /* DMA Channel 5 Frame ID Register */ +#define LDCMD5 __REG(0x4400025C) /* DMA Channel 5 Command Register */ + +#define OVL1C1 __REG(0x44000050) /* Overlay 1 Control Register 1 */ +#define OVL1C2 __REG(0x44000060) /* Overlay 1 Control Register 2 */ +#define OVL2C1 __REG(0x44000070) /* Overlay 2 Control Register 1 */ +#define OVL2C2 __REG(0x44000080) /* Overlay 2 Control Register 2 */ +#define CCR __REG(0x44000090) /* Cursor Control Register */ + +#define FBR5 __REG(0x44000110) /* DMA Channel 5 Frame Branch Register */ +#define FBR6 __REG(0x44000114) /* DMA Channel 6 Frame Branch Register */ + +#define LCCR0_LDDALT (1<<26) /* LDD Alternate mapping bit when base pixel is RGBT16 */ +#define LCCR0_OUC (1<<25) /* Overlay Underlay Control Bit */ + +#define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */ +#define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */ +#define LCCR5_SOFM3 (1<<2) /* Start Of Frame Mask for Overlay 2 (channel 3) */ +#define LCCR5_SOFM4 (1<<3) /* Start Of Frame Mask for Overlay 2 (channel 4) */ +#define LCCR5_SOFM5 (1<<4) /* Start Of Frame Mask for cursor (channel 5) */ +#define LCCR5_SOFM6 (1<<5) /* Start Of Frame Mask for command data (channel 6) */ + +#define LCCR5_EOFM1 (1<<8) /* End Of Frame Mask for Overlay 1 (channel 1) */ +#define LCCR5_EOFM2 (1<<9) /* End Of Frame Mask for Overlay 2 (channel 2) */ +#define LCCR5_EOFM3 (1<<10) /* End Of Frame Mask for Overlay 2 (channel 3) */ +#define LCCR5_EOFM4 (1<<11) /* End Of Frame Mask for Overlay 2 (channel 4) */ +#define LCCR5_EOFM5 (1<<12) /* End Of Frame Mask for cursor (channel 5) */ +#define LCCR5_EOFM6 (1<<13) /* End Of Frame Mask for command data (channel 6) */ + +#define LCCR5_BSM1 (1<<16) /* Branch mask for Overlay 1 (channel 1) */ +#define LCCR5_BSM2 (1<<17) /* Branch mask for Overlay 2 (channel 2) */ +#define LCCR5_BSM3 (1<<18) /* Branch mask for Overlay 2 (channel 3) */ +#define LCCR5_BSM4 (1<<19) /* Branch mask for Overlay 2 (channel 4) */ +#define LCCR5_BSM5 (1<<20) /* Branch mask for cursor (channel 5) */ +#define LCCR5_BSM6 (1<<21) /* Branch mask for data command (channel 6) */ + +#define LCCR5_IUM1 (1<<24) /* Input FIFO Underrun Mask for Overlay 1 */ +#define LCCR5_IUM2 (1<<25) /* Input FIFO Underrun Mask for Overlay 2 */ +#define LCCR5_IUM3 (1<<26) /* Input FIFO Underrun Mask for Overlay 2 */ +#define LCCR5_IUM4 (1<<27) /* Input FIFO Underrun Mask for Overlay 2 */ +#define LCCR5_IUM5 (1<<28) /* Input FIFO Underrun Mask for cursor */ +#define LCCR5_IUM6 (1<<29) /* Input FIFO Underrun Mask for data command */ + +#define OVL1C1_O1EN (1<<31) /* Enable bit for Overlay 1 */ +#define OVL2C1_O2EN (1<<31) /* Enable bit for Overlay 2 */ +#define CCR_CEN (1<<31) /* Enable bit for Cursor */ + +/* Keypad controller */ + +#define KPC __REG(0x41500000) /* Keypad Interface Control register */ +#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */ +#define KPREC __REG(0x41500010) /* Keypad Intefcace Rotary Encoder register */ +#define KPMK __REG(0x41500018) /* Keypad Intefcace Matrix Key register */ +#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */ +#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ +#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ +#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ +#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ +#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */ + +#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ +#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ +#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ +#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ +#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */ +#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */ +#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */ +#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */ +#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */ +#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */ +#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */ +#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */ +#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ +#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ +#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Key Debounce select */ +#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ +#define KPC_DEE0 (0x1 << 2) /* Rotary Encoder 0 Enable */ +#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ +#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ + +#define KPDK_DKP (0x1 << 31) +#define KPDK_DK7 (0x1 << 7) +#define KPDK_DK6 (0x1 << 6) +#define KPDK_DK5 (0x1 << 5) +#define KPDK_DK4 (0x1 << 4) +#define KPDK_DK3 (0x1 << 3) +#define KPDK_DK2 (0x1 << 2) +#define KPDK_DK1 (0x1 << 1) +#define KPDK_DK0 (0x1 << 0) + +#define KPREC_OF1 (0x1 << 31) +#define kPREC_UF1 (0x1 << 30) +#define KPREC_OF0 (0x1 << 15) +#define KPREC_UF0 (0x1 << 14) + +#define KPMK_MKP (0x1 << 31) +#define KPAS_SO (0x1 << 31) +#define KPASMKPx_SO (0x1 << 31) + +#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */ +#define PSLR __REG(0x40F00034) +#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */ +#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */ +#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */ +#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */ +#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */ +#define OSMR4 __REG(0x40A00080) /* */ +#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ +#define OMCR4 __REG(0x40A000C0) /* */ + +#endif /* CONFIG_PXA27X */ + +#endif /* _PXA_REGS_H_ */ diff -u -r --new-file u-boot-1.1.2/include/asm-arm/mach-types.h u-boot-1.1.2-neon/include/asm-arm/mach-types.h --- u-boot-1.1.2/include/asm-arm/mach-types.h 2004-10-10 20:41:14.000000000 +0200 +++ u-boot-1.1.2-neon/include/asm-arm/mach-types.h 2007-08-11 21:07:21.000000000 +0200 @@ -624,6 +624,9 @@ #define MACH_TYPE_RMS100 611 #define MACH_TYPE_KB9200 612 #define MACH_TYPE_SX1 613 +#define MACH_TYPE_NEON 332 +#define MACH_TYPE_BD2003 332 +#define MACH_TYPE_HALOGEN 332 #ifdef CONFIG_ARCH_EBSA110 # ifdef machine_arch_type @@ -7945,6 +7948,42 @@ # define machine_is_sx1() (0) #endif +#ifdef CONFIG_ARCH_NEON +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NEON +# endif +# define machine_is_neon() (machine_arch_type == MACH_TYPE_NEON) +#else +# define machine_is_neon() (0) +#endif + +#ifdef CONFIG_ARCH_BD2003 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BD2003 +# endif +# define machine_is_bd2003() (machine_arch_type == MACH_TYPE_BD2003) +#else +# define machine_is_bd2003() (0) +#endif + +#ifdef CONFIG_ARCH_HALOGEN +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HALOGEN +# endif +# define machine_is_halogen() (machine_arch_type == MACH_TYPE_HALOGEN) +#else +# define machine_is_halogen() (0) +#endif + /* * These have not yet been registered */ diff -u -r --new-file u-boot-1.1.2/include/asm-arm/processor.h u-boot-1.1.2-neon/include/asm-arm/processor.h --- u-boot-1.1.2/include/asm-arm/processor.h 2003-06-26 00:26:36.000000000 +0200 +++ u-boot-1.1.2-neon/include/asm-arm/processor.h 2007-08-11 21:07:21.000000000 +0200 @@ -48,11 +48,22 @@ #include #include +#ifdef arm +#warning arm defined by preprocessor +#define armX arm +#undef arm +#endif + union debug_insn { u32 arm; u16 thumb; }; +#ifdef armX +#define arm +#undef armX +#endif + struct debug_entry { u32 address; union debug_insn insn; diff -u -r --new-file u-boot-1.1.2/include/cmd_confdefs.h u-boot-1.1.2-neon/include/cmd_confdefs.h --- u-boot-1.1.2/include/cmd_confdefs.h 2004-12-16 18:59:53.000000000 +0100 +++ u-boot-1.1.2-neon/include/cmd_confdefs.h 2007-08-11 21:07:21.000000000 +0200 @@ -92,6 +92,8 @@ #define CFG_CMD_XIMG 0x0400000000000000ULL /* Load part of Multi Image */ #define CFG_CMD_UNIVERSE 0x0800000000000000ULL /* Tundra Universe Support */ #define CFG_CMD_EXT2 0x1000000000000000ULL /* EXT2 Support */ +#define CFG_CMD_LCDPANEL 0x2000000000000000ULL /* Dynamic LCD Panel Support */ +#define CFG_CMD_NOT 0x4000000000000000ULL /* Negate a command */ #define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFFULL /* ALL commands */ diff -u -r --new-file u-boot-1.1.2/include/configs/bd2003.h u-boot-1.1.2-neon/include/configs/bd2003.h --- u-boot-1.1.2/include/configs/bd2003.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/configs/bd2003.h 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,315 @@ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * bd2003.h + * + * This header file declares the configuration constants for the Boundary + * Devices BD2003 board. + * + * Change History : + * + * $Log: bd2003.h,v $ + * Revision 1.7 2005/07/18 01:51:59 tkisky + * -define display types + * + * Revision 1.6 2005/07/17 22:52:10 ericn + * -fix comment + * + * Revision 1.5 2005/07/17 22:36:37 ericn + * -merge w/boundaryLib + * + * Revision 1.4 2005/07/02 18:45:55 ericn + * -bring up-to-date + * + * Revision 1.3 2005/04/20 09:05:36 tkisky + * -include select.h + * + * Revision 1.2 2005/04/15 10:40:52 tkisky + * -remove LCD_XRES,LCD_YRES + * + * Revision 1.1 2005/04/09 17:49:24 ericn + * -Initial import + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Copyright Boundary Devices, Inc. 2005 + */ + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#include "select.h" + +#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ +#define PXALCD 1 /* Using the PXA display controller */ +#define CONFIG_LCD 1 + +#define CONFIG_MMC 1 +#define BOARD_LATE_INIT 1 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_MMU_SPACE_RESERVED (1<<14) + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE 0x10000300 +#define CONFIG_SMC_USE_32_BIT + +/* + * select serial console configuration + */ +#define CONFIG_FFUART 1 /* we use FFUART on BD2003 */ + +/* allow to overwrite serial and ethaddr */ +//#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define SKIP_COMMANDS ( CFG_CMD_MISC \ + | CFG_CMD_BDI \ + | CFG_CMD_BOOTD \ + | CFG_CMD_LOADS \ + | CFG_CMD_LOADB \ + | CFG_CMD_ITEST \ + | CFG_CMD_FPGA \ + | CFG_CMD_ECHO \ + | CFG_CMD_DIAG \ + | CFG_CMD_DATE \ + | CFG_CMD_BOOTP \ + | CFG_CMD_NFS \ + ) +// | CFG_CMD_FLASH +// | CFG_CMD_DHCP +// | CFG_CMD_NET +// | CFG_CMD_MEMORY +// | CFG_CMD_ENV + +#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL \ + | CFG_CMD_MMC \ + | CFG_CMD_FAT \ + | CFG_CMD_LCDPANEL \ + | CFG_CMD_FLASH \ + | CFG_CMD_DHCP \ + | CFG_CMD_ENV \ + | CFG_CMD_BMP) & ~(SKIP_COMMANDS) ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTCOMMAND "mmcinit; " \ + "fatload mmc 0 a0000000 init.scr ; autoscr a0000000 ; " +#define CONFIG_BOOTARGS "console=ttyS0,115200 DEBUG=1 ENV=/etc/bashrc init=/linuxrc rw mtdparts=phys:1024k(armboot),256k(params),-(rootfs1) root=/dev/mtdblock3 rootfstype=cramfs" +#define CONFIG_CMDLINE_TAG + +#define CONFIG_GZIP + +/* + * Choose one of the following: + * + * hitachi_qvga + * sharp_qvga + * hitachi_hvga + * sharp_vga + * hitachi_wvga - 7 or 9 inch + */ +#ifndef DA320X240 +#define DA320X240 0 +#define DA640X240 1 +#define DA800X480 2 +#define DA640X480 3 +#define DA240X320 4 +#define DA800X600 5 +#define DA1024X768 6 +#define DP480X320 7 +#define DP320X240 8 +#define DL122X32 9 +#endif + +#if DISPLAY_TYPE == DA640X240 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=hitachi_hvga" "\0" +#elif DISPLAY_TYPE == DA240X320 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=qvga_portrait" "\0" +#elif DISPLAY_TYPE == DA320X240 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=hitachi_qvga" "\0" +#elif DISPLAY_TYPE == DA8000X480 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=hitachi_wvga" "\0" +#elif DISPLAY_TYPE == DA640X480 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=sharp_vga" "\0" +#elif DISPLAY_TYPE == DA800X480 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=hitachi_wvga" "\0" +#elif DISPLAY_TYPE == DA1024X768 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=crt1024x768" "\0" +#else +#error No display selected +#endif + +#define LCD_BPP LCD_COLOR8 + + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xa0030000 /* default load address */ + +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_MMC_BASE 0xF0000000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ +#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ +#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ +#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ + +#define CFG_DRAM_BASE 0xa0000000 +#define CFG_DRAM_SIZE 0x04000000 + + +/* + * Memory settings + */ +#define CFG_MSC0_VAL 0x23F223F2 +#define CFG_MSC1_VAL 0x3FF1A441 +#define CFG_MSC2_VAL 0x7FF97FF1 +#define CFG_MDCNFG_VAL 0x00001AC9 +#define CFG_MDREFR_VAL 0x00018018 +#define CFG_MDMRS_VAL 0x00000000 + +/* + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ + +/* + * Environment is saved in flash at offset 1MB + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_FLASH_BASE 0 +#define CFG_ENV_ADDR ((CFG_FLASH_BASE)+0x100000) /* Addr of Environment Sector */ +#define CFG_ENV_OFFSET ((CFG_ENV_ADDR)-(CFG_FLASH_BASE)) +#define CFG_ENV_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */ + +/* + * GPIO settings + */ +#define CFG_GPSR0_VAL 0x00008000 +#define CFG_GPSR1_VAL 0x00FC0382 +#define CFG_GPSR2_VAL 0x0001FFFF +#define CFG_GPCR0_VAL 0x00000000 +#define CFG_GPCR1_VAL 0x00000000 +#define CFG_GPCR2_VAL 0x00000000 +#define CFG_GPDR0_VAL 0x0060A800 +#define CFG_GPDR1_VAL 0x00FF0382 +#define CFG_GPDR2_VAL 0x0001C000 +#define CFG_GAFR0_L_VAL 0x98400000 +#define CFG_GAFR0_U_VAL 0x00002950 +#define CFG_GAFR1_L_VAL 0x000A9558 +#define CFG_GAFR1_U_VAL 0x0005AAAA +#define CFG_GAFR2_L_VAL 0xA0000000 +#define CFG_GAFR2_U_VAL 0x00000002 + +#define CFG_PSSR_VAL 0x20 + +/* + * PCMCIA and CF Interfaces + */ +#define CFG_MECR_VAL 0x00000000 +#define CFG_MCMEM0_VAL 0x00010504 +#define CFG_MCMEM1_VAL 0x00010504 +#define CFG_MCATT0_VAL 0x00010504 +#define CFG_MCATT1_VAL 0x00010504 +#define CFG_MCIO0_VAL 0x00004715 +#define CFG_MCIO1_VAL 0x00004715 + +#ifndef __ASSEMBLY__ + +extern unsigned long const fbStart ; +extern unsigned long paletteRegs ; + +#endif /* _ASMLANGUAGE */ + +#endif + diff -u -r --new-file u-boot-1.1.2/include/configs/.cvsignore u-boot-1.1.2-neon/include/configs/.cvsignore --- u-boot-1.1.2/include/configs/.cvsignore 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/configs/.cvsignore 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1 @@ +select.h diff -u -r --new-file u-boot-1.1.2/include/configs/halogen.h u-boot-1.1.2-neon/include/configs/halogen.h --- u-boot-1.1.2/include/configs/halogen.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/configs/halogen.h 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,325 @@ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * halogen.h + * + * This header file declares the configuration constants for the Boundary + * Devices Halogen (PXA-270) boards. + * + * Change History : + * + * $Log: halogen.h,v $ + * Revision 1.6 2005/07/18 01:51:59 tkisky + * -define display types + * + * Revision 1.5 2005/07/17 22:52:10 ericn + * -fix comment + * + * Revision 1.4 2005/07/17 22:36:37 ericn + * -merge w/boundaryLib + * + * Revision 1.3 2005/07/16 16:26:00 ericn + * -fix name, memsize + * + * Revision 1.2 2005/07/10 14:32:45 ericn + * -include USB + * + * Revision 1.1 2005/07/04 16:40:32 ericn + * -Initial import + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Copyright Boundary Devices, Inc. 2005 + */ + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#include "select.h" + +#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_PXA270 1 /* This is a PXA270 CPU */ +#define CONFIG_PXA27X 1 /* Which is a PXA27X */ + +#define PXALCD 1 /* Using the PXA display controller */ +#define CONFIG_LCD 1 + +#define CONFIG_MMC 1 +#define BOARD_LATE_INIT 1 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_MMU_SPACE_RESERVED (1<<14) + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE 0x10000300 +#define CONFIG_SMC_USE_32_BIT + +/************************************************************ + * USB support + ************************************************************/ +#define LITTLEENDIAN 1 /* Needed by usb_ohci.c */ +#define CFG_DEVICE_DEREGISTER 1 /* Needed by usb_kbd */ +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_KEYBOARD 1 +#define CONFIG_USB_STORAGE 1 + +/* + * select serial console configuration + */ +#define CONFIG_FFUART 1 /* we use FFUART on HALOGEN */ + +/* allow to overwrite serial and ethaddr */ +//#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define SKIP_COMMANDS ( CFG_CMD_MISC \ + | CFG_CMD_BDI \ + | CFG_CMD_BOOTD \ + | CFG_CMD_LOADS \ + | CFG_CMD_LOADB \ + | CFG_CMD_ITEST \ + | CFG_CMD_FPGA \ + | CFG_CMD_ECHO \ + | CFG_CMD_DIAG \ + | CFG_CMD_DATE \ + | CFG_CMD_BOOTP \ + | CFG_CMD_NFS \ + ) +// | CFG_CMD_FLASH +// | CFG_CMD_DHCP +// | CFG_CMD_NET +// | CFG_CMD_MEMORY +// | CFG_CMD_ENV + +#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL \ + | CFG_CMD_MMC \ + | CFG_CMD_FAT \ + | CFG_CMD_LCDPANEL \ + | CFG_CMD_FLASH \ + | CFG_CMD_DHCP \ + | CFG_CMD_ENV \ + | CFG_CMD_USB \ + | CFG_CMD_BMP) & ~(SKIP_COMMANDS) ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTCOMMAND "mmcinit; " \ + "fatload mmc 0 a0000000 init.scr ; autoscr a0000000 ; " +#define CONFIG_BOOTARGS "console=ttyS0,115200 DEBUG=1 ENV=/etc/bashrc init=/linuxrc rw mtdparts=phys:1024k(armboot),256k(params),-(rootfs1) root=/dev/mtdblock3 rootfstype=cramfs" +#define CONFIG_CMDLINE_TAG + +#define CONFIG_GZIP + +/* + * Choose one of the following: + * + * hitachi_qvga + * sharp_qvga + * hitachi_hvga + * sharp_vga + * hitachi_wvga - 7 or 9 inch + */ +#ifndef DA320X240 +#define DA320X240 0 +#define DA640X240 1 +#define DA800X480 2 +#define DA640X480 3 +#define DA240X320 4 +#define DA800X600 5 +#define DA1024X768 6 +#define DP480X320 7 +#define DP320X240 8 +#define DL122X32 9 +#endif + +#if DISPLAY_TYPE == DA640X240 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=hitachi_hvga" "\0" +#elif DISPLAY_TYPE == DA240X320 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=qvga_portrait" "\0" +#elif DISPLAY_TYPE == DA320X240 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=hitachi_qvga" "\0" +#elif DISPLAY_TYPE == DA8000X480 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=hitachi_wvga" "\0" +#elif DISPLAY_TYPE == DA640X480 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=sharp_vga" "\0" +#elif DISPLAY_TYPE == DA800X480 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=hitachi_wvga" "\0" +#elif DISPLAY_TYPE == DA1024X768 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=crt1024x768" "\0" +#else +#error No display selected +#endif + +#define LCD_BPP LCD_COLOR8 + + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xa0030000 /* default load address */ + +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_MMC_BASE 0xF0000000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ +#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ +#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ +#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ + +#define CFG_DRAM_BASE 0xa0000000 +#define CFG_DRAM_SIZE 0x04000000 + + +/* + * Memory settings + */ +#define CFG_MSC0_VAL 0x23F223F2 +#define CFG_MSC1_VAL 0x3FF1A441 +#define CFG_MSC2_VAL 0x7FF97FF1 +#define CFG_MDCNFG_VAL 0x00001AC9 +#define CFG_MDREFR_VAL 0x00018018 +#define CFG_MDMRS_VAL 0x00000000 + +/* + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ + +/* + * Environment is saved in flash at offset 1MB + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_FLASH_BASE 0 +#define CFG_ENV_ADDR ((CFG_FLASH_BASE)+0x100000) /* Addr of Environment Sector */ +#define CFG_ENV_OFFSET ((CFG_ENV_ADDR)-(CFG_FLASH_BASE)) +#define CFG_ENV_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */ + +/* + * GPIO settings + */ +#define CFG_GPSR0_VAL 0x00008000 +#define CFG_GPSR1_VAL 0x00FC0382 +#define CFG_GPSR2_VAL 0x0001FFFF +#define CFG_GPCR0_VAL 0x00000000 +#define CFG_GPCR1_VAL 0x00000000 +#define CFG_GPCR2_VAL 0x00000000 +#define CFG_GPDR0_VAL 0x0060A800 +#define CFG_GPDR1_VAL 0x00FF0382 +#define CFG_GPDR2_VAL 0x0001C000 +#define CFG_GAFR0_L_VAL 0x98400000 +#define CFG_GAFR0_U_VAL 0x00002950 +#define CFG_GAFR1_L_VAL 0x000A9558 +#define CFG_GAFR1_U_VAL 0x0005AAAA +#define CFG_GAFR2_L_VAL 0xA0000000 +#define CFG_GAFR2_U_VAL 0x00000002 + +#define CFG_PSSR_VAL 0x20 + +/* + * PCMCIA and CF Interfaces + */ +#define CFG_MECR_VAL 0x00000000 +#define CFG_MCMEM0_VAL 0x00010504 +#define CFG_MCMEM1_VAL 0x00010504 +#define CFG_MCATT0_VAL 0x00010504 +#define CFG_MCATT1_VAL 0x00010504 +#define CFG_MCIO0_VAL 0x00004715 +#define CFG_MCIO1_VAL 0x00004715 + +#ifndef __ASSEMBLY__ + +extern unsigned long const fbStart ; +extern unsigned long paletteRegs ; + +#endif /* _ASMLANGUAGE */ + +#endif + diff -u -r --new-file u-boot-1.1.2/include/configs/neon.h u-boot-1.1.2-neon/include/configs/neon.h --- u-boot-1.1.2/include/configs/neon.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/configs/neon.h 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,395 @@ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * neon.h + * + * This header file declares the configuration constants for the Boundary + * Devices Neon board. + * + * Change History : + * + * $Log: neon.h,v $ + * Revision 1.27 2006/05/30 15:52:17 ericn + * -clear screen after SD wait loop + * + * Revision 1.26 2006/05/27 22:11:50 ericn + * -include 'not', 'sleep' commands, wait for SD, for prompt + * + * Revision 1.25 2005/10/22 02:09:31 ericn + * -add CONFIG_SUPPORT_VFAT + * + * Revision 1.24 2005/07/23 19:35:42 ericn + * -fix name + * + * Revision 1.23 2005/07/23 17:13:25 ericn + * -add USB support + * + * Revision 1.22 2005/07/18 01:48:15 tkisky + * -define display types + * + * Revision 1.21 2005/07/17 22:52:10 ericn + * -fix comment + * + * Revision 1.20 2005/07/17 22:36:37 ericn + * -merge w/boundaryLib + * + * Revision 1.19 2005/07/02 18:46:16 ericn + * -Neon always has CONFIG_SM501 + * + * Revision 1.18 2005/07/02 14:57:11 ericn + * -include INITRD tag + * + * Revision 1.17 2005/06/02 04:55:06 ericn + * -auto-choose qvga_portrait for DA240X320 + * + * Revision 1.16 2005/06/02 04:10:30 ericn + * -save environment in flash + * + * Revision 1.15 2005/05/08 22:07:31 ericn + * -added 1024x768, 800x480 options + * + * Revision 1.14 2005/05/05 04:11:53 ericn + * -add flash commands, sharp_vga display selector + * + * Revision 1.13 2005/05/05 03:22:20 ericn + * -change default load addr to WinCE's + * + * Revision 1.12 2005/05/04 04:22:23 ericn + * -updated to allow DHCP + * + * Revision 1.11 2005/05/03 15:28:56 ericn + * -include DHCP support + * + * Revision 1.10 2005/05/02 15:14:26 ericn + * -add SMC driver, remove hard-coded MAC + * + * Revision 1.9 2005/05/01 15:21:41 ericn + * -change crtPalette -> paletteRegs + * + * Revision 1.8 2005/04/28 03:41:23 ericn + * -pass RAM qty to Linux + * + * Revision 1.7 2005/04/28 03:35:32 ericn + * -default to cramfs + * + * Revision 1.6 2005/04/22 01:57:39 ericn + * -fix default boot args + * + * Revision 1.5 2005/04/20 09:05:36 tkisky + * -include select.h + * + * Revision 1.4 2005/04/18 13:49:10 ericn + * -default wvga, use init.scr + * + * Revision 1.3 2005/04/18 03:58:48 ericn + * -added autoscr, hush parser support + * + * Revision 1.2 2005/04/15 10:41:35 tkisky + * -remove LCD_XRES,LCD_YRES, remove extra mmcinit + * + * Revision 1.1 2005/04/09 17:49:25 ericn + * -Initial import + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Copyright Boundary Devices, Inc. 2005 + */ + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#include "select.h" + +#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ +#define CONFIG_NEON 1 /* on a Neon Board */ +#define CONFIG_SM501 1 +#define CONFIG_LCD 1 + +#define CONFIG_MMC 1 +#define BOARD_LATE_INIT 1 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_MMU_SPACE_RESERVED (1<<14) + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE 0x10000300 +#define CONFIG_SMC_USE_32_BIT + +/************************************************************ + * USB support + ************************************************************/ +#define LITTLEENDIAN 1 /* Needed by usb_ohci.c */ +#define CFG_DEVICE_DEREGISTER 1 /* Needed by usb_kbd */ +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_KEYBOARD 1 +#define CONFIG_USB_STORAGE 1 + +/* + * select serial console configuration + */ +#define CONFIG_FFUART 1 /* we use FFUART on NEON */ + +/* allow to overwrite serial and ethaddr */ +//#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define SKIP_COMMANDS ( CFG_CMD_BDI \ + | CFG_CMD_BOOTD \ + | CFG_CMD_LOADS \ + | CFG_CMD_LOADB \ + | CFG_CMD_ITEST \ + | CFG_CMD_FPGA \ + | CFG_CMD_ECHO \ + | CFG_CMD_DIAG \ + | CFG_CMD_DATE \ + | CFG_CMD_BOOTP \ + | CFG_CMD_NFS \ + ) +// | CFG_CMD_FLASH +// | CFG_CMD_DHCP +// | CFG_CMD_NET +// | CFG_CMD_MEMORY +// | CFG_CMD_ENV + +#define CONFIG_SUPPORT_VFAT +#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL \ + | CFG_CMD_MMC \ + | CFG_CMD_FAT \ + | CFG_CMD_LCDPANEL \ + | CFG_CMD_FLASH \ + | CFG_CMD_DHCP \ + | CFG_CMD_ENV \ + | CFG_CMD_USB \ + | CFG_CMD_NOT \ + | CFG_CMD_MISC \ + | CFG_CMD_BMP) & ~(SKIP_COMMANDS) ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTCOMMAND "while not mmcdet ; do cls ; lecho \"insert SD card\" ; sleep 1 ; done ; cls" \ + "if mmcwp ; then lecho \"write protected\" ; else lecho \"not write protected\" ; fi ; " \ + "mmcinit; " \ + "if fatload mmc 0 a0000000 init.scr ; then autoscr a0000000 ; fi" +#define CONFIG_BOOTARGS "console=ttyS0,115200 DEBUG=1 ENV=/etc/bashrc init=/linuxrc rw mtdparts=phys:1024k(armboot),256k(params),-(rootfs1) root=/dev/mtdblock3 rootfstype=cramfs" +#define CONFIG_CMDLINE_TAG + +#define CONFIG_GZIP + +#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ +#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" +#define CONFIG_AUTOBOOT_DELAY_STR "\x1b\x1b\x1b" + +/* + * Choose one of the following: + * + * hitachi_qvga + * sharp_qvga + * hitachi_hvga + * sharp_vga + * hitachi_wvga - 7 or 9 inch + */ +#ifndef DA320X240 +#define DA320X240 0 +#define DA640X240 1 +#define DA800X480 2 +#define DA640X480 3 +#define DA240X320 4 +#define DA800X600 5 +#define DA1024X768 6 +#define DP480X320 7 +#define DP320X240 8 +#define DL122X32 9 +#endif + +#if DISPLAY_TYPE == DA640X240 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=hitachi_hvga" "\0" +#elif DISPLAY_TYPE == DA240X320 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=qvga_portrait" "\0" +#elif DISPLAY_TYPE == DA320X240 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=hitachi_qvga" "\0" +#elif DISPLAY_TYPE == DA8000X480 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=hitachi_wvga" "\0" +#elif DISPLAY_TYPE == DA640X480 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=sharp_vga" "\0" +#elif DISPLAY_TYPE == DA800X480 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=hitachi_wvga" "\0" +#elif DISPLAY_TYPE == DA1024X768 +#define CONFIG_EXTRA_ENV_SETTINGS "panel=crt1024x768" "\0" +#else +#error No display selected +#endif + +#define LCD_BPP LCD_COLOR8 + + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xa0030000 /* default load address */ + +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_MMC_BASE 0xF0000000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ +#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ +#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ +#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ + +#define CFG_DRAM_BASE 0xa0000000 +#define CFG_DRAM_SIZE 0x04000000 + + +/* + * Memory settings + */ +#define CFG_MSC0_VAL 0x23F223F2 +#define CFG_MSC1_VAL 0x3FF1A441 +#define CFG_MSC2_VAL 0x7FF97FF1 +#define CFG_MDCNFG_VAL 0x00001AC9 +#define CFG_MDREFR_VAL 0x00018018 +#define CFG_MDMRS_VAL 0x00000000 + +/* + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ + +/* + * Environment is saved in flash at offset 1MB + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_FLASH_BASE 0 +#define CFG_ENV_ADDR ((CFG_FLASH_BASE)+0x100000) /* Addr of Environment Sector */ +#define CFG_ENV_OFFSET ((CFG_ENV_ADDR)-(CFG_FLASH_BASE)) +#define CFG_ENV_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */ + +/* + * GPIO settings + */ +#define CFG_GPSR0_VAL 0x00008000 +#define CFG_GPSR1_VAL 0x00FC0382 +#define CFG_GPSR2_VAL 0x0001FFFF +#define CFG_GPCR0_VAL 0x00000000 +#define CFG_GPCR1_VAL 0x00000000 +#define CFG_GPCR2_VAL 0x00000000 +#define CFG_GPDR0_VAL 0x0060A800 +#define CFG_GPDR1_VAL 0x00FF0382 +#define CFG_GPDR2_VAL 0x0001C000 +#define CFG_GAFR0_L_VAL 0x98400000 +#define CFG_GAFR0_U_VAL 0x00002950 +#define CFG_GAFR1_L_VAL 0x000A9558 +#define CFG_GAFR1_U_VAL 0x0005AAAA +#define CFG_GAFR2_L_VAL 0xA0000000 +#define CFG_GAFR2_U_VAL 0x00000002 + +#define CFG_PSSR_VAL 0x20 + +/* + * PCMCIA and CF Interfaces + */ +#define CFG_MECR_VAL 0x00000000 +#define CFG_MCMEM0_VAL 0x00010504 +#define CFG_MCMEM1_VAL 0x00010504 +#define CFG_MCATT0_VAL 0x00010504 +#define CFG_MCATT1_VAL 0x00010504 +#define CFG_MCIO0_VAL 0x00004715 +#define CFG_MCIO1_VAL 0x00004715 + +#ifndef __ASSEMBLY__ + +extern unsigned long const fbStart ; +extern unsigned long paletteRegs ; + +#endif /* _ASMLANGUAGE */ + +#endif + diff -u -r --new-file u-boot-1.1.2/include/fat.h u-boot-1.1.2-neon/include/fat.h --- u-boot-1.1.2/include/fat.h 2004-04-23 22:32:07.000000000 +0200 +++ u-boot-1.1.2-neon/include/fat.h 2007-08-11 21:07:21.000000000 +0200 @@ -177,13 +177,13 @@ /* Private filesystem parameters */ typedef struct { + __u8 fatbuf[FATBUFSIZE]; /* Current FAT buffer */ int fatsize; /* Size of FAT in bits */ __u16 fatlength; /* Length of FAT in sectors */ __u16 fat_sect; /* Starting sector of the FAT */ __u16 rootdir_sect; /* Start sector of root directory */ __u16 clust_size; /* Size of clusters in sectors */ short data_begin; /* The sector of the first cluster, can be negative */ - __u8 fatbuf[FATBUFSIZE]; /* Current FAT buffer */ int fatbufnum; /* Used by get_fatent, init to -1 */ } fsdata; diff -u -r --new-file u-boot-1.1.2/include/lcd.h u-boot-1.1.2-neon/include/lcd.h --- u-boot-1.1.2/include/lcd.h 2004-10-10 01:26:01.000000000 +0200 +++ u-boot-1.1.2-neon/include/lcd.h 2007-08-11 21:07:21.000000000 +0200 @@ -31,7 +31,6 @@ extern char lcd_is_enabled; -extern int lcd_line_length; extern int lcd_color_fg; extern int lcd_color_bg; @@ -53,6 +52,7 @@ ushort vl_row; /* Number of rows (i.e. 480) */ ushort vl_width; /* Width of display area in millimeters */ ushort vl_height; /* Height of display area in millimeters */ + int vl_lcd_line_length; /* LCD configuration register */ u_char vl_clkp; /* Clock polarity */ @@ -77,7 +77,7 @@ extern vidinfo_t panel_info; -#elif defined CONFIG_PXA250 +#elif defined( PXALCD ) /* * PXA LCD DMA descriptor */ @@ -119,6 +119,7 @@ ushort vl_row; /* Number of rows (i.e. 480) */ ushort vl_width; /* Width of display area in millimeters */ ushort vl_height; /* Height of display area in millimeters */ + int vl_lcd_line_length; /* LCD configuration register */ u_char vl_clkp; /* Clock polarity */ @@ -148,7 +149,29 @@ extern vidinfo_t panel_info; -#endif /* CONFIG_MPC823 or CONFIG_PXA250 */ +#if defined( CONFIG_PXA250 ) + #define PALETTEVAL_TYPE u16 +#elif defined( CONFIG_PXA270 ) + #define PALETTEVAL_TYPE u32 +#else +#error no processor defined +#endif + +#elif defined( CONFIG_SM501 ) + +/* + * LCD controller stucture for PXA CPU + */ +typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 640) */ + ushort vl_row; /* Number of rows (i.e. 480) */ + int vl_lcd_line_length; + u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ +} vidinfo_t; + +extern vidinfo_t panel_info; + +#endif /* CONFIG_MPC823 */ /* Video functions */ @@ -272,7 +295,7 @@ #endif #define CONSOLE_COLS (panel_info.vl_col / VIDEO_FONT_WIDTH) -#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * lcd_line_length) +#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * panel_info.vl_lcd_line_length) #define CONSOLE_ROW_FIRST (lcd_console_address) #define CONSOLE_ROW_SECOND (lcd_console_address + CONSOLE_ROW_SIZE) #define CONSOLE_ROW_LAST (lcd_console_address + CONSOLE_SIZE \ diff -u -r --new-file u-boot-1.1.2/include/lcd_panels.h u-boot-1.1.2-neon/include/lcd_panels.h --- u-boot-1.1.2/include/lcd_panels.h 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/include/lcd_panels.h 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,83 @@ +#ifndef __LCD_PANELS_H__ +#define __LCD_PANELS_H__ "$Id: lcd_panels.h,v 1.3 2005/06/02 04:03:37 ericn Exp $" + +/* + * lcd_panels.h + * + * This header file declares the lcd_panel_info_t + * data type and the num_lcd_panels and lcd_panels + * constants for use in initializing a variety of displays. + * + * Note that this is based on the pxafb_mach_info structure + * in linux-2.4.19/drivers/video/pxafb.h (Nico's patches), + * but differs in a couple of respects: + * + * Doesn't support the color-mapping stuff + * Includes an 'active' flag + * + * Doesn't include the lccr0 and lccr3 fields, since most of + * the fields in those registers are display controller options, + * not panel options, and the others (so far) can have reasonable + * defaults. When (if) we need to support a non-standard display, + * we can fill in the blanks with defaults in the previously + * supported displays and compute lccr0 and lccr3. + * + * Change History : + * + * $Log: lcd_panels.h,v $ + * Revision 1.3 2005/06/02 04:03:37 ericn + * -added rotation field + * + * Revision 1.2 2005/04/30 20:33:36 ericn + * -added CRT support + * + * Revision 1.1 2005/04/09 17:49:18 ericn + * -Initial import + * + * + * Copyright Boundary Devices, Inc. 2005 + */ + +struct lcd_panel_info_t { + char const *name ; + unsigned long pixclock; + + unsigned short xres; + unsigned short yres; + + unsigned act_high ; // clock is active high + unsigned hsync_len; + unsigned left_margin; + unsigned right_margin; + unsigned vsync_len; + unsigned upper_margin; + unsigned lower_margin; + unsigned active ; // active matrix (TFT) LCD + unsigned crt ; // 1 == CRT, not LCD + unsigned rotation ; +}; + +#ifdef __cplusplus +extern "C" { +#endif + +extern unsigned const num_lcd_panels ; +extern struct lcd_panel_info_t const * const lcd_panels ; + +extern struct lcd_panel_info_t const *find_lcd_panel( char const * name ); + + +// +// Each platform needs to define this routine, and +// set cur_lcd_panel within +// +void set_lcd_panel( struct lcd_panel_info_t const *panel ); +extern struct lcd_panel_info_t const *cur_lcd_panel ; +void disable_lcd_panel( void ); + +#ifdef __CPLUSPLUS +}; +#endif + +#endif + diff -u -r --new-file u-boot-1.1.2/include/part.h u-boot-1.1.2-neon/include/part.h --- u-boot-1.1.2/include/part.h 2004-04-18 19:39:40.000000000 +0200 +++ u-boot-1.1.2-neon/include/part.h 2007-08-11 21:07:21.000000000 +0200 @@ -24,6 +24,48 @@ #define _PART_H #include +enum { +/* These three have identical behaviour; use the second one if DOS fdisk gets + confused about extended/logical partitions starting past cylinder 1023. */ + DOS_EXTENDED_PARTITION = 5, + LINUX_EXTENDED_PARTITION = 0x85, + WIN98_EXTENDED_PARTITION = 0x0f, + + LINUX_SWAP_PARTITION = 0x82, + LINUX_RAID_PARTITION = 0xfd, /* autodetect RAID partition */ + + SOLARIS_X86_PARTITION = LINUX_SWAP_PARTITION, + + DM6_PARTITION = 0x54, /* has DDO: use xlated geom & offset */ + EZD_PARTITION = 0x55, /* EZ-DRIVE */ + DM6_AUX1PARTITION = 0x51, /* no DDO: use xlated geom */ + DM6_AUX3PARTITION = 0x53, /* no DDO: use xlated geom */ + + FREEBSD_PARTITION = 0xa5, /* FreeBSD Partition ID */ + OPENBSD_PARTITION = 0xa6, /* OpenBSD Partition ID */ + NETBSD_PARTITION = 0xa9, /* NetBSD Partition ID */ + BSDI_PARTITION = 0xb7, /* BSDI Partition ID */ +/* Ours is not to wonder why.. */ + BSD_PARTITION = FREEBSD_PARTITION, + MINIX_PARTITION = 0x81, /* Minix Partition ID */ + PLAN9_PARTITION = 0x39, /* Plan 9 Partition ID */ + UNIXWARE_PARTITION = 0x63, /* Partition ID, same as */ + /* GNU_HURD and SCO Unix */ +}; + +struct partition { + unsigned char boot_ind; /* 0x80 - active */ + unsigned char head; /* starting head */ + unsigned char sector; /* starting sector */ + unsigned char cyl; /* starting cylinder */ + unsigned char sys_ind; /* What partition type */ + unsigned char end_head; /* end head */ + unsigned char end_sector; /* end sector */ + unsigned char end_cyl; /* end cylinder */ + unsigned int start_sect; /* starting sector counting from 0 */ + unsigned int nr_sects; /* nr of sectors in partition */ +} __attribute__((packed)); + typedef struct block_dev_desc { int if_type; /* type of the interface */ int dev; /* device number */ @@ -118,4 +160,15 @@ int test_part_amiga (block_dev_desc_t *dev_desc); #endif +/* Value returned by `fnmatch' if STRING does not match PATTERN. */ +#define FNM_NOMATCH 1 + +/* Bits set in the FLAGS argument to `fnmatch'. */ +#define FNM_PATHNAME (1 << 0) /* No wildcard can ever match `/'. */ +#define FNM_NOESCAPE (1 << 1) /* Backslashes don't quote special chars. */ +#define FNM_PERIOD (1 << 2) /* Leading `.' is matched only explicitly. */ +#define FNM_NOSYS (-1) + +int fnmatch(const char *pattern, const char *string, int flags); + #endif /* _PART_H */ diff -u -r --new-file u-boot-1.1.2/lib_arm/armlinux.c u-boot-1.1.2-neon/lib_arm/armlinux.c --- u-boot-1.1.2/lib_arm/armlinux.c 2004-10-10 01:26:01.000000000 +0200 +++ u-boot-1.1.2-neon/lib_arm/armlinux.c 2007-08-11 21:07:21.000000000 +0200 @@ -29,6 +29,7 @@ #ifdef CONFIG_HAS_DATAFLASH #include #endif +#include "lcd_panels.h" /*cmd_boot.c*/ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); @@ -88,6 +89,16 @@ #ifdef CONFIG_CMDLINE_TAG char *commandline = getenv ("bootargs"); + if( ( 0 != cur_lcd_panel ) && ( 0 != cur_lcd_panel->rotation ) ) + { + char temp[80]; + int addedLen = sprintf( temp, " fbrotation=%u", cur_lcd_panel->rotation ); + unsigned cmdLen = strlen( commandline ); + char *bigger = (char *)malloc( cmdLen + addedLen + 1 ); + strcpy( bigger, commandline ); + strcpy( bigger+cmdLen, temp ); + commandline = bigger ; + } #endif theKernel = (void (*)(int, int, uint))ntohl(hdr->ih_ep); @@ -365,6 +376,7 @@ * We only use it to pass the address and size, the other entries * in the tag_videolfb are not of interest. */ +#ifdef VESA_DISPLAY params->hdr.tag = ATAG_VIDEOLFB; params->hdr.size = tag_size (tag_videolfb); @@ -374,6 +386,7 @@ params->u.videolfb.lfb_size = calc_fbsize(); params = tag_next (params); +#endif } #endif /* CONFIG_VFD || CONFIG_LCD */ diff -u -r --new-file u-boot-1.1.2/lib_arm/board.c u-boot-1.1.2-neon/lib_arm/board.c --- u-boot-1.1.2/lib_arm/board.c 2004-08-02 00:48:22.000000000 +0200 +++ u-boot-1.1.2-neon/lib_arm/board.c 2007-08-11 21:07:21.000000000 +0200 @@ -216,7 +216,10 @@ #endif /* Pointer is writable since we allocated a register for it */ - gd = (gd_t*)(_armboot_start - CFG_MALLOC_LEN - sizeof(gd_t)); +#ifndef CFG_MMU_SPACE_RESERVED +#define CFG_MMU_SPACE_RESERVED 0 +#endif + gd = (gd_t*)(_armboot_start - CFG_MMU_SPACE_RESERVED - CFG_MALLOC_LEN - sizeof(gd_t)); /* compiler optimization barrier needed for GCC >= 3.4 */ __asm__ __volatile__("": : :"memory"); @@ -263,7 +266,7 @@ #endif /* CONFIG_LCD */ /* armboot_start is defined in the board-specific linker script */ - mem_malloc_init (_armboot_start - CFG_MALLOC_LEN); + mem_malloc_init (_armboot_start - CFG_MMU_SPACE_RESERVED - CFG_MALLOC_LEN); #if (CONFIG_COMMANDS & CFG_CMD_NAND) puts ("NAND:"); diff -u -r --new-file u-boot-1.1.2/make_all u-boot-1.1.2-neon/make_all --- u-boot-1.1.2/make_all 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/make_all 2007-08-11 21:07:21.000000000 +0200 @@ -0,0 +1,31 @@ +#!/bin/sh +halogen1_clock="416" +halogen2_clock="416" +bd2003_clock="400" +neon_clock="400" +neonb_clock="400" + +SOFTWARE="LINUX" + +targets="halogen1 halogen2 bd2003 neon neonb" +for suff in $targets ; do + make distclean ; + REV="" + PLATFORM="$suff" + if [ $suff = "halogen1" ] ; then REV="1\n"; PLATFORM="halogen" + else + if [ $suff = "halogen2" ] ; then REV="2\n"; PLATFORM="halogen" + fi + fi + eval clock=\$$suff"_clock" + echo -e "DA640X240\n$REV$SOFTWARE\ny\n$clock\n" | make $PLATFORM"_config" ; + make u-boot.bin ; + mv u-boot.bin u-boot-$suff +done + + +for suff in $targets ; do + mv u-boot-$suff u-boot-$suff.bin +done + +zip u-boot-binaries.zip u-boot-*.bin diff -u -r --new-file u-boot-1.1.2/Makefile u-boot-1.1.2-neon/Makefile --- u-boot-1.1.2/Makefile 2004-12-19 10:58:11.000000000 +0100 +++ u-boot-1.1.2-neon/Makefile 2007-08-11 21:17:14.000000000 +0200 @@ -57,7 +57,7 @@ CROSS_COMPILE = ppc_8xx- endif ifeq ($(ARCH),arm) -CROSS_COMPILE = arm-linux- +CROSS_COMPILE = arm-elf- endif ifeq ($(ARCH),i386) ifeq ($(HOSTARCH),i386) @@ -89,6 +89,9 @@ ######################################################################### # U-Boot objects....order is important (i.e. start must be first) +ifeq ($(CPU),pxa) +OBJS = +else OBJS = cpu/$(CPU)/start.o ifeq ($(CPU),i386) OBJS += cpu/$(CPU)/start16.o @@ -100,6 +103,7 @@ ifeq ($(CPU),mpc85xx) OBJS += cpu/$(CPU)/resetvec.o endif +endif LIBS = lib_generic/libgeneric.a LIBS += board/$(BOARDDIR)/lib$(BOARD).a @@ -121,7 +125,8 @@ .PHONY : $(LIBS) # Add GCC lib -PLATFORM_LIBS += --no-warn-mismatch -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc +LIBGCC_DIRNAME := $(shell dirname "`$(CC) $(CFLAGS) -print-libgcc-file-name`") +PLATFORM_LIBS += --no-warn-mismatch -L "$(LIBGCC_DIRNAME)" -lgcc # The "tools" are needed early, so put this first @@ -129,13 +134,14 @@ SUBDIRS = tools \ examples \ post \ - post/cpu + post/cpu \ + cpu/$(CPU) .PHONY : $(SUBDIRS) ######################################################################### ######################################################################### -ALL = u-boot.srec u-boot.bin System.map +ALL = u-boot.srec u-boot.bin System.map init.scr upgrade.scr all: $(ALL) @@ -192,6 +198,12 @@ grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ sort > System.map +init.scr: board/$(BOARDDIR)/init.script + tools/mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "autoscript" -d $< $@ + +upgrade.scr: upgrade.script + tools/mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "U-Boot upgrade script" -d $< $@ + ######################################################################### else all install u-boot u-boot.srec depend dep: @@ -203,6 +215,7 @@ unconfig: @rm -f include/config.h include/config.mk board/*/config.tmp + @rm -f select.mk include/configs/select.h #======================================================================== # PowerPC @@ -1388,6 +1401,22 @@ wepep250_config : unconfig @./mkconfig $(@:_config=) arm pxa wepep250 +bd-neon_config : unconfig + @./mkconfig $(@:_config=) arm pxa neon + ./Configure --PLATFORM_TYPE=NEON + +neonb_config : unconfig + @./mkconfig neon arm pxa neon + ./Configure --PLATFORM_TYPE=NEONB --SOFTWARE_TYPE=WINCE --DISPLAY_TYPE=DA640X240 + +bd2003_config : unconfig + @./mkconfig $(@:_config=) arm pxa bd2003 + ./Configure --PLATFORM_TYPE=BD2003 + +halogen_config : unconfig + @./mkconfig $(@:_config=) arm pxa halogen + ./Configure --PLATFORM_TYPE=HALOGEN + xaeniax_config : unconfig @./mkconfig $(@:_config=) arm pxa xaeniax @@ -1558,10 +1587,16 @@ ######################################################################### ######################################################################### +ifeq ($(HOSTOS),cygwin) +FIND = /bin/find +else +FIND = find +endif + clean: - find . -type f \ + $(FIND) . -type f \ \( -name 'core' -o -name '*.bak' -o -name '*~' \ - -o -name '*.o' -o -name '*.a' \) -print \ + -o -name '*.o' -o -name '*.a' -o -name '*.lst' \) -print \ | xargs rm -f rm -f examples/hello_world examples/timer \ examples/eepro100_eeprom examples/sched \ @@ -1575,7 +1610,7 @@ rm -f board/trab/trab_fkt clobber: clean - find . -type f \( -name .depend \ + $(FIND) . -type f \( -name .depend \ -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ -print0 \ | xargs -0 rm -f @@ -1585,6 +1620,8 @@ rm -f tools/crc32.c tools/environment.c tools/env/crc32.c rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c rm -f include/asm/proc include/asm/arch include/asm + cd tools && rm -f *.exe + rm -f include/configs/select.h select.mk select.log mrproper \ distclean: clobber unconfig diff -u -r --new-file u-boot-1.1.2/patches/arm_flags.patch u-boot-1.1.2-neon/patches/arm_flags.patch --- u-boot-1.1.2/patches/arm_flags.patch 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/patches/arm_flags.patch 2007-08-11 21:01:36.000000000 +0200 @@ -0,0 +1,15 @@ + +# +# Patch managed by http://www.holgerschurig.de/patcher.html +# + +--- u-boot-1.1.2/cpu/pxa/config.mk~armflags ++++ u-boot-1.1.2/cpu/pxa/config.mk +@@ -23,6 +23,6 @@ + # + + PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ +- -mshort-load-bytes -msoft-float ++ -msoft-float + + PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4 -mtune=strongarm1100 diff -u -r --new-file u-boot-1.1.2/patches/series u-boot-1.1.2-neon/patches/series --- u-boot-1.1.2/patches/series 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/patches/series 2007-08-11 21:01:36.000000000 +0200 @@ -0,0 +1,2 @@ +arm_flags.patch -p1 +u-boot-2006-06-03.patch.gz -p1 Binary files u-boot-1.1.2/patches/u-boot-2006-06-03.patch.gz and u-boot-1.1.2-neon/patches/u-boot-2006-06-03.patch.gz differ diff -u -r --new-file u-boot-1.1.2/.pc/applied-patches u-boot-1.1.2-neon/.pc/applied-patches --- u-boot-1.1.2/.pc/applied-patches 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/.pc/applied-patches 2007-08-11 21:01:36.000000000 +0200 @@ -0,0 +1 @@ +arm_flags.patch diff -u -r --new-file u-boot-1.1.2/.pc/arm_flags.patch/cpu/pxa/config.mk u-boot-1.1.2-neon/.pc/arm_flags.patch/cpu/pxa/config.mk --- u-boot-1.1.2/.pc/arm_flags.patch/cpu/pxa/config.mk 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/.pc/arm_flags.patch/cpu/pxa/config.mk 2003-05-23 14:36:21.000000000 +0200 @@ -0,0 +1,28 @@ +# +# (C) Copyright 2002 +# Sysgo Real-Time Solutions, GmbH +# Marius Groeger +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ + -mshort-load-bytes -msoft-float + +PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4 -mtune=strongarm1100 diff -u -r --new-file u-boot-1.1.2/.pc/.version u-boot-1.1.2-neon/.pc/.version --- u-boot-1.1.2/.pc/.version 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/.pc/.version 2007-08-11 21:01:36.000000000 +0200 @@ -0,0 +1 @@ +2 diff -u -r --new-file u-boot-1.1.2/README u-boot-1.1.2-neon/README --- u-boot-1.1.2/README 2004-12-16 22:44:03.000000000 +0100 +++ u-boot-1.1.2-neon/README 2007-08-11 21:07:19.000000000 +0200 @@ -608,6 +608,7 @@ CFG_CMD_ITEST Integer/string test of 2 values CFG_CMD_JFFS2 * JFFS2 Support CFG_CMD_KGDB * kgdb + CFG_CMD_LCDPANEL * Dynamic LCD Panel support CFG_CMD_LOADB loadb CFG_CMD_LOADS loads CFG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, @@ -812,6 +813,9 @@ for differential drivers: 0x00001000 for single ended drivers: 0x00005000 +- Dynamic LCD Panel support + Allows the choice of an LCD panel through the environment. + Also allows prompting for panel characteristics. - MMC Support: The MMC controller on the Intel PXA is supported. To diff -u -r --new-file u-boot-1.1.2/tools/mkimage.c u-boot-1.1.2-neon/tools/mkimage.c --- u-boot-1.1.2/tools/mkimage.c 2004-11-21 01:06:36.000000000 +0100 +++ u-boot-1.1.2-neon/tools/mkimage.c 2007-08-11 21:07:22.000000000 +0200 @@ -618,10 +618,10 @@ printf ("Image Name: %.*s\n", IH_NMLEN, hdr->ih_name); printf ("Created: %s", ctime(×tamp)); printf ("Image Type: "); print_type(hdr); - printf ("Data Size: %d Bytes = %.2f kB = %.2f MB\n", + printf ("Data Size: %ld Bytes = %.2f kB = %.2f MB\n", size, (double)size / 1.024e3, (double)size / 1.048576e6 ); - printf ("Load Address: 0x%08X\n", ntohl(hdr->ih_load)); - printf ("Entry Point: 0x%08X\n", ntohl(hdr->ih_ep)); + printf ("Load Address: 0x%08lX\n", ntohl(hdr->ih_load)); + printf ("Entry Point: 0x%08lX\n", ntohl(hdr->ih_ep)); if (hdr->ih_type == IH_TYPE_MULTI || hdr->ih_type == IH_TYPE_SCRIPT) { int i, ptrs; @@ -640,7 +640,7 @@ for (i=0; len_ptr[i]; ++i) { size = ntohl(len_ptr[i]); - printf (" Image %d: %8d Bytes = %4d kB = %d MB\n", + printf (" Image %d: %8ld Bytes = %4ld kB = %ld MB\n", i, size, size>>10, size>>20); if (hdr->ih_type == IH_TYPE_SCRIPT && i > 0) { /* @@ -648,7 +648,7 @@ * if planning to do something with * multiple files */ - printf (" Offset = %08X\n", pos); + printf (" Offset = %08lX\n", pos); } /* copy_file() will pad the first files to even word align */ size += 3; diff -u -r --new-file u-boot-1.1.2/upgrade.script u-boot-1.1.2-neon/upgrade.script --- u-boot-1.1.2/upgrade.script 1970-01-01 01:00:00.000000000 +0100 +++ u-boot-1.1.2-neon/upgrade.script 2007-08-11 21:07:22.000000000 +0200 @@ -0,0 +1,32 @@ +lecho "---------> upgrade to newest U-Boot" +echo "---------> upgrade to newest U-Boot" +if fatload mmc 0 a0008000 u-boot-*.bin ; then + if cmp.b 0 a0008000 $filesize ; then + fatload mmc 0 a0008000 *.bmp + bmp display a0008000 + lecho 'Already upgraded. Latest U-Boot is installed' ; + echo 'Already upgraded. Latest U-Boot is installed' ; + if mmcwp ; then + lecho "write protected" ; + else + lecho "not write protected" ; + fi + else + lecho 'Old U-Boot found. Upgrading' ; + echo 'Old U-Boot found. Upgrading' ; + protect off all ; + lecho 'Erasing' ; + echo 'Erasing' ; + erase 0 3FFFF ; + lecho 'Programming' ; + echo 'Programming' ; + cp.b a0008000 0 $filesize ; + lecho 'Done programming. Cycle power' ; + echo 'Done programming. Cycle power' ; + fi +else + lecho 'Error loading new U-Boot from SD card' + echo 'Error loading new U-Boot from SD card' + lecho 'Should have u-boot-neon-something.bin' + echo 'Should have u-boot-neon-something.bin' +fi \ No newline at end of file