Add proper support for S3C2440 CPU's

Index: u-boot/include/s3c24x0.h
===================================================================
--- u-boot.orig/include/s3c24x0.h
+++ u-boot/include/s3c24x0.h
@@ -82,7 +82,7 @@
 	S3C24X0_REG32	PRIORITY;
 	S3C24X0_REG32	INTPND;
 	S3C24X0_REG32	INTOFFSET;
-#ifdef CONFIG_S3C2410
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 	S3C24X0_REG32	SUBSRCPND;
 	S3C24X0_REG32	INTSUBMSK;
 #endif
@@ -92,11 +92,11 @@
 /* DMAS (see manual chapter 8) */
 typedef struct {
 	S3C24X0_REG32	DISRC;
-#ifdef CONFIG_S3C2410
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 	S3C24X0_REG32	DISRCC;
 #endif
 	S3C24X0_REG32	DIDST;
-#ifdef CONFIG_S3C2410
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 	S3C24X0_REG32	DIDSTC;
 #endif
 	S3C24X0_REG32	DCON;
@@ -107,7 +107,7 @@
 #ifdef CONFIG_S3C2400
 	S3C24X0_REG32	res[1];
 #endif
-#ifdef CONFIG_S3C2410
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 	S3C24X0_REG32	res[7];
 #endif
 } /*__attribute__((__packed__))*/ S3C24X0_DMA;
@@ -126,6 +126,9 @@
 	S3C24X0_REG32	CLKCON;
 	S3C24X0_REG32	CLKSLOW;
 	S3C24X0_REG32	CLKDIVN;
+#ifdef CONFIG_S3C2440
+	S3C24X0_REG32	CAMDIVN;
+#endif
 } /*__attribute__((__packed__))*/ S3C24X0_CLOCK_POWER;
 
 
@@ -145,7 +148,7 @@
 	S3C24X0_REG32	res[8];
 	S3C24X0_REG32	DITHMODE;
 	S3C24X0_REG32	TPAL;
-#ifdef CONFIG_S3C2410
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 	S3C24X0_REG32	LCDINTPND;
 	S3C24X0_REG32	LCDSRCPND;
 	S3C24X0_REG32	LCDINTMSK;
@@ -157,6 +160,9 @@
 /* NAND FLASH (see S3C2410 manual chapter 6) */
 typedef struct {
 	S3C24X0_REG32	NFCONF;
+#ifdef CONFIG_S3C2440
+	S3C24X0_REG32	NFCONT;
+#endif
 	S3C24X0_REG32	NFCMD;
 	S3C24X0_REG32	NFADDR;
 	S3C24X0_REG32	NFDATA;
@@ -164,6 +170,15 @@
 	S3C24X0_REG32	NFECC;
 } /*__attribute__((__packed__))*/ S3C2410_NAND;
 
+/* NAND FLASH (see S3C2440 manual chapter 6) */
+typedef struct {
+	S3C24X0_REG32	NFCONF;
+	S3C24X0_REG32	NFCMD;
+	S3C24X0_REG32	NFADDR;
+	S3C24X0_REG32	NFDATA;
+	S3C24X0_REG32	NFSTAT;
+	S3C24X0_REG32	NFECC;
+} /*__attribute__((__packed__))*/ S3C2440_NAND;
 
 /* UART (see manual chapter 11) */
 typedef struct {
@@ -451,6 +466,65 @@
 	S3C24X0_REG32	GSTATUS3;
 	S3C24X0_REG32	GSTATUS4;
 #endif
+#ifdef CONFIG_S3C2440
+	S3C24X0_REG32	GPACON;
+	S3C24X0_REG32	GPADAT;
+	S3C24X0_REG32	res1[2];
+	S3C24X0_REG32	GPBCON;
+	S3C24X0_REG32	GPBDAT;
+	S3C24X0_REG32	GPBUP;
+	S3C24X0_REG32	res2;
+	S3C24X0_REG32	GPCCON;
+	S3C24X0_REG32	GPCDAT;
+	S3C24X0_REG32	GPCUP;
+	S3C24X0_REG32	res3;
+	S3C24X0_REG32	GPDCON;
+	S3C24X0_REG32	GPDDAT;
+	S3C24X0_REG32	GPDUP;
+	S3C24X0_REG32	res4;
+	S3C24X0_REG32	GPECON;
+	S3C24X0_REG32	GPEDAT;
+	S3C24X0_REG32	GPEUP;
+	S3C24X0_REG32	res5;
+	S3C24X0_REG32	GPFCON;
+	S3C24X0_REG32	GPFDAT;
+	S3C24X0_REG32	GPFUP;
+	S3C24X0_REG32	res6;
+	S3C24X0_REG32	GPGCON;
+	S3C24X0_REG32	GPGDAT;
+	S3C24X0_REG32	GPGUP;
+	S3C24X0_REG32	res7;
+	S3C24X0_REG32	GPHCON;
+	S3C24X0_REG32	GPHDAT;
+	S3C24X0_REG32	GPHUP;
+	S3C24X0_REG32	res8;
+
+	S3C24X0_REG32	MISCCR;
+	S3C24X0_REG32	DCLKCON;
+	S3C24X0_REG32	EXTINT0;
+	S3C24X0_REG32	EXTINT1;
+	S3C24X0_REG32	EXTINT2;
+	S3C24X0_REG32	EINTFLT0;
+	S3C24X0_REG32	EINTFLT1;
+	S3C24X0_REG32	EINTFLT2;
+	S3C24X0_REG32	EINTFLT3;
+	S3C24X0_REG32	EINTMASK;
+	S3C24X0_REG32	EINTPEND;
+	S3C24X0_REG32	GSTATUS0;
+	S3C24X0_REG32	GSTATUS1;
+	S3C24X0_REG32	GSTATUS2;
+	S3C24X0_REG32	GSTATUS3;
+	S3C24X0_REG32	GSTATUS4;
+
+	S3C24X0_REG32	res9;
+	S3C24X0_REG32	DSC0;
+	S3C24X0_REG32	DSC1;
+	S3C24X0_REG32	MSLCON;
+	S3C24X0_REG32	GPJCON;
+	S3C24X0_REG32	GPJDAT;
+	S3C24X0_REG32	GPJUP;
+	S3C24X0_REG32	res10;
+#endif
 } /*__attribute__((__packed__))*/ S3C24X0_GPIO;
 
 
@@ -637,8 +711,13 @@
 	S3C24X0_REG32	SDIDCNT;
 	S3C24X0_REG32	SDIDSTA;
 	S3C24X0_REG32	SDIFSTA;
+#if defined(CONFIG_S3C2410)
 	S3C24X0_REG32	SDIDAT;
 	S3C24X0_REG32	SDIIMSK;
+#elif defined(CONFIG_S3C2440)
+	S3C24X0_REG32	SDIIMSK;
+	S3C24X0_REG32	SDIDAT;
+#endif
 } /*__attribute__((__packed__))*/ S3C2410_SDI;
 
 
Index: u-boot/rtc/s3c24x0_rtc.c
===================================================================
--- u-boot.orig/rtc/s3c24x0_rtc.c
+++ u-boot/rtc/s3c24x0_rtc.c
@@ -34,6 +34,8 @@
 #include <s3c2400.h>
 #elif defined(CONFIG_S3C2410)
 #include <s3c2410.h>
+#elif defined(CONFIG_S3C2440)
+#include <s3c2440.h>
 #endif
 
 #include <rtc.h>
Index: u-boot/include/s3c2440.h
===================================================================
--- /dev/null
+++ u-boot/include/s3c2440.h
@@ -0,0 +1,300 @@
+/*
+ * (C) Copyright 2003
+ * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************
+ * NAME	    : s3c2440.h
+ * Version  : 2007.
+ *
+ * Based on S3C2410X User's manual Rev 1.1
+ ************************************************/
+
+#ifndef __S3C2440_H__
+#define __S3C2440_H__
+
+#define S3C24X0_UART_CHANNELS	3
+#define S3C24X0_SPI_CHANNELS	2
+
+/* S3C2440 only supports 512 Byte HW ECC */
+#define S3C2440_ECCSIZE		512
+#define S3C2440_ECCBYTES	3
+
+/* S3C2440 device base addresses */
+#define S3C24X0_MEMCTL_BASE		0x48000000
+#define S3C24X0_USB_HOST_BASE		0x49000000
+#define S3C24X0_INTERRUPT_BASE		0x4A000000
+#define S3C24X0_DMA_BASE		0x4B000000
+#define S3C24X0_CLOCK_POWER_BASE	0x4C000000
+#define S3C24X0_LCD_BASE		0x4D000000
+#define S3C2440_NAND_BASE		0x4E000000
+#define S3C24X0_UART_BASE		0x50000000
+#define S3C24X0_TIMER_BASE		0x51000000
+#define S3C24X0_USB_DEVICE_BASE		0x52000140
+#define USB_DEVICE_PHYS_ADR		0x52000000
+#define S3C24X0_WATCHDOG_BASE		0x53000000
+#define S3C24X0_I2C_BASE		0x54000000
+#define S3C24X0_I2S_BASE		0x55000000
+#define S3C24X0_GPIO_BASE		0x56000000
+#define S3C24X0_RTC_BASE		0x57000000
+#define S3C2440_ADC_BASE		0x58000000
+#define S3C24X0_SPI_BASE		0x59000000
+#define S3C2440_SDI_BASE		0x5A000000
+
+#define oNFCONF			0x00
+#define oNFCONT			0x04
+
+#ifndef __ASSEMBLER__
+
+/* include common stuff */
+#include <s3c24x0.h>
+
+typedef enum {
+	S3C24X0_UART0,
+	S3C24X0_UART1,
+	S3C24X0_UART2
+} S3C24X0_UARTS_NR;
+
+static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void)
+{
+	return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE;
+}
+static inline S3C24X0_USB_HOST * S3C24X0_GetBase_USB_HOST(void)
+{
+	return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE;
+}
+static inline S3C24X0_INTERRUPT * S3C24X0_GetBase_INTERRUPT(void)
+{
+	return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE;
+}
+static inline S3C24X0_DMAS * S3C24X0_GetBase_DMAS(void)
+{
+	return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE;
+}
+static inline S3C24X0_CLOCK_POWER * S3C24X0_GetBase_CLOCK_POWER(void)
+{
+	return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE;
+}
+static inline S3C24X0_LCD * S3C24X0_GetBase_LCD(void)
+{
+	return (S3C24X0_LCD * const)S3C24X0_LCD_BASE;
+}
+static inline S3C2440_NAND * S3C2440_GetBase_NAND(void)
+{
+	return (S3C2440_NAND * const)S3C2440_NAND_BASE;
+}
+static inline S3C24X0_UART * S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr)
+{
+	return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000));
+}
+static inline S3C24X0_TIMERS * S3C24X0_GetBase_TIMERS(void)
+{
+	return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE;
+}
+static inline S3C24X0_USB_DEVICE * S3C24X0_GetBase_USB_DEVICE(void)
+{
+	return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE;
+}
+static inline S3C24X0_WATCHDOG * S3C24X0_GetBase_WATCHDOG(void)
+{
+	return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE;
+}
+static inline S3C24X0_I2C * S3C24X0_GetBase_I2C(void)
+{
+	return (S3C24X0_I2C * const)S3C24X0_I2C_BASE;
+}
+static inline S3C24X0_I2S * S3C24X0_GetBase_I2S(void)
+{
+	return (S3C24X0_I2S * const)S3C24X0_I2S_BASE;
+}
+static inline S3C24X0_GPIO * S3C24X0_GetBase_GPIO(void)
+{
+	return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE;
+}
+static inline S3C24X0_RTC * S3C24X0_GetBase_RTC(void)
+{
+	return (S3C24X0_RTC * const)S3C24X0_RTC_BASE;
+}
+/*
+static inline S3C2440_ADC * S3C2440_GetBase_ADC(void)
+{
+	return (S3C2440_ADC * const)S3C2440_ADC_BASE;
+}
+static inline S3C24X0_SPI * S3C24X0_GetBase_SPI(void)
+{
+	return (S3C24X0_SPI * const)S3C24X0_SPI_BASE;
+}
+*/
+static inline S3C2410_SDI * S3C2410_GetBase_SDI(void)
+{
+	return (S3C2410_SDI * const)S3C2440_SDI_BASE;
+}
+
+#endif /* __ASSEMBLER__ */
+
+/* ISR */
+#define pISR_RESET		(*(unsigned *)(_ISR_STARTADDRESS+0x0))
+#define pISR_UNDEF		(*(unsigned *)(_ISR_STARTADDRESS+0x4))
+#define pISR_SWI		(*(unsigned *)(_ISR_STARTADDRESS+0x8))
+#define pISR_PABORT		(*(unsigned *)(_ISR_STARTADDRESS+0xC))
+#define pISR_DABORT		(*(unsigned *)(_ISR_STARTADDRESS+0x10))
+#define pISR_RESERVED		(*(unsigned *)(_ISR_STARTADDRESS+0x14))
+#define pISR_IRQ		(*(unsigned *)(_ISR_STARTADDRESS+0x18))
+#define pISR_FIQ		(*(unsigned *)(_ISR_STARTADDRESS+0x1C))
+
+#define pISR_EINT0		(*(unsigned *)(_ISR_STARTADDRESS+0x20))
+#define pISR_EINT1		(*(unsigned *)(_ISR_STARTADDRESS+0x24))
+#define pISR_EINT2		(*(unsigned *)(_ISR_STARTADDRESS+0x28))
+#define pISR_EINT3		(*(unsigned *)(_ISR_STARTADDRESS+0x2C))
+#define pISR_EINT4_7		(*(unsigned *)(_ISR_STARTADDRESS+0x30))
+#define pISR_EINT8_23		(*(unsigned *)(_ISR_STARTADDRESS+0x34))
+#define pISR_BAT_FLT		(*(unsigned *)(_ISR_STARTADDRESS+0x3C))
+#define pISR_TICK		(*(unsigned *)(_ISR_STARTADDRESS+0x40))
+#define pISR_WDT		(*(unsigned *)(_ISR_STARTADDRESS+0x44))
+#define pISR_TIMER0		(*(unsigned *)(_ISR_STARTADDRESS+0x48))
+#define pISR_TIMER1		(*(unsigned *)(_ISR_STARTADDRESS+0x4C))
+#define pISR_TIMER2		(*(unsigned *)(_ISR_STARTADDRESS+0x50))
+#define pISR_TIMER3		(*(unsigned *)(_ISR_STARTADDRESS+0x54))
+#define pISR_TIMER4		(*(unsigned *)(_ISR_STARTADDRESS+0x58))
+#define pISR_UART2		(*(unsigned *)(_ISR_STARTADDRESS+0x5C))
+#define pISR_NOTUSED		(*(unsigned *)(_ISR_STARTADDRESS+0x60))
+#define pISR_DMA0		(*(unsigned *)(_ISR_STARTADDRESS+0x64))
+#define pISR_DMA1		(*(unsigned *)(_ISR_STARTADDRESS+0x68))
+#define pISR_DMA2		(*(unsigned *)(_ISR_STARTADDRESS+0x6C))
+#define pISR_DMA3		(*(unsigned *)(_ISR_STARTADDRESS+0x70))
+#define pISR_SDI		(*(unsigned *)(_ISR_STARTADDRESS+0x74))
+#define pISR_SPI0		(*(unsigned *)(_ISR_STARTADDRESS+0x78))
+#define pISR_UART1		(*(unsigned *)(_ISR_STARTADDRESS+0x7C))
+#define pISR_USBD		(*(unsigned *)(_ISR_STARTADDRESS+0x84))
+#define pISR_USBH		(*(unsigned *)(_ISR_STARTADDRESS+0x88))
+#define pISR_IIC		(*(unsigned *)(_ISR_STARTADDRESS+0x8C))
+#define pISR_UART0		(*(unsigned *)(_ISR_STARTADDRESS+0x90))
+#define pISR_SPI1		(*(unsigned *)(_ISR_STARTADDRESS+0x94))
+#define pISR_RTC		(*(unsigned *)(_ISR_STARTADDRESS+0x98))
+#define pISR_ADC		(*(unsigned *)(_ISR_STARTADDRESS+0xA0))
+
+
+/* PENDING BIT */
+#define BIT_EINT0		(0x1)
+#define BIT_EINT1		(0x1<<1)
+#define BIT_EINT2		(0x1<<2)
+#define BIT_EINT3		(0x1<<3)
+#define BIT_EINT4_7		(0x1<<4)
+#define BIT_EINT8_23		(0x1<<5)
+#define BIT_BAT_FLT		(0x1<<7)
+#define BIT_TICK		(0x1<<8)
+#define BIT_WDT			(0x1<<9)
+#define BIT_TIMER0		(0x1<<10)
+#define BIT_TIMER1		(0x1<<11)
+#define BIT_TIMER2		(0x1<<12)
+#define BIT_TIMER3		(0x1<<13)
+#define BIT_TIMER4		(0x1<<14)
+#define BIT_UART2		(0x1<<15)
+#define BIT_LCD			(0x1<<16)
+#define BIT_DMA0		(0x1<<17)
+#define BIT_DMA1		(0x1<<18)
+#define BIT_DMA2		(0x1<<19)
+#define BIT_DMA3		(0x1<<20)
+#define BIT_SDI			(0x1<<21)
+#define BIT_SPI0		(0x1<<22)
+#define BIT_UART1		(0x1<<23)
+#define BIT_USBD		(0x1<<25)
+#define BIT_USBH		(0x1<<26)
+#define BIT_IIC			(0x1<<27)
+#define BIT_UART0		(0x1<<28)
+#define BIT_SPI1		(0x1<<29)
+#define BIT_RTC			(0x1<<30)
+#define BIT_ADC			(0x1<<31)
+#define BIT_ALLMSK		(0xFFFFFFFF)
+
+#define ClearPending(bit) {\
+		 rSRCPND = bit;\
+		 rINTPND = bit;\
+		 rINTPND;\
+		 }
+/* Wait until rINTPND is changed for the case that the ISR is very short. */
+
+#define __REG(x)	(*(volatile unsigned long *)(x))
+#define __REGl(x)	(*(volatile unsigned long *)(x))
+#define __REGw(x)	(*(volatile unsigned short *)(x))
+#define __REGb(x)	(*(volatile unsigned char *)(x))
+#define __REG2(x,y)	(*(volatile unsigned long *)((x) + (y)))
+
+/*
+ *  * Nand flash controller
+ *   */
+
+#define NFDATA8			(*(volatile unsigned char *)0x4E000010)
+#define NFDATA16		(*(volatile unsigned short *)0x4E000010)
+#define NFDATA32		(*(volatile unsigned *)0x4E000010)
+
+#define NFCONF                  __REG(0x4E000000)
+#define NFCONT                  __REG(0x4E000004)
+#define NFCMD                  __REG(0x4E000008)
+#define NFADDR                  __REGb(0x4E00000C)
+#define NFMECCD0                __REG(0x4E000014)
+#define NFMECCD1                __REG(0x4E000018)
+#define NFSECCD                 __REG(0x4E00001C)
+#define NFSTAT                  __REG(0x4E000020)
+#define NFESTAT0                __REG(0x4E000024)
+#define NFESTAT1                __REG(0x4E000028)
+#define NFMECC0                 __REG(0x4E00002C)
+#define NFMECC1                 __REG(0x4E000030)
+#define NFSECC                  __REG(0x4E000034)
+#define NFSBLK                  __REG(0x4E000038)
+
+
+#define S3C2410_MISCCR_USBDEV	    (0<<3)
+#define S3C2410_MISCCR_USBHOST	    (1<<3)
+
+#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
+#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
+#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
+#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
+#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
+#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
+#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
+
+#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
+#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
+#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
+#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
+#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
+#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
+#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
+
+#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
+#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
+
+#define S3C2410_MISCCR_nRSTCON	    (1<<16)
+
+#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
+#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
+#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)
+#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
+
+#define S3C2410_CLKSLOW_UCLK_OFF	(1<<7)
+#define S3C2410_CLKSLOW_MPLL_OFF	(1<<5)
+#define S3C2410_CLKSLOW_SLOW		(1<<4)
+#define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
+#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
+
+#endif /*__S3C2440_H__*/
Index: u-boot/include/common.h
===================================================================
--- u-boot.orig/include/common.h
+++ u-boot/include/common.h
@@ -454,7 +454,7 @@
 ulong	get_OPB_freq (void);
 ulong	get_PCI_freq (void);
 #endif
-#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_LH7A40X)
+#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) || defined(CONFIG_LH7A40X)
 void	s3c2410_irq(void);
 #define ARM920_IRQ_CALLBACK s3c2410_irq
 ulong	get_FCLK (void);
Index: u-boot/cpu/arm920t/s3c24x0/usb_ohci.c
===================================================================
--- u-boot.orig/cpu/arm920t/s3c24x0/usb_ohci.c
+++ u-boot/cpu/arm920t/s3c24x0/usb_ohci.c
@@ -44,6 +44,8 @@
 #include <s3c2400.h>
 #elif defined(CONFIG_S3C2410)
 #include <s3c2410.h>
+#elif defined(CONFIG_S3C2440)
+#include <s3c2440.h>
 #endif
 
 #include <malloc.h>
Index: u-boot/cpu/arm920t/s3c24x0/speed.c
===================================================================
--- u-boot.orig/cpu/arm920t/s3c24x0/speed.c
+++ u-boot/cpu/arm920t/s3c24x0/speed.c
@@ -30,12 +30,15 @@
  */
 
 #include <common.h>
-#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
+#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || \
+    defined (CONFIG_S3C2440) || defined (CONFIG_TRAB)
 
 #if defined(CONFIG_S3C2400)
 #include <s3c2400.h>
 #elif defined(CONFIG_S3C2410)
 #include <s3c2410.h>
+#elif defined(CONFIG_S3C2440)
+#include <s3c2440.h>
 #endif
 
 #define MPLL 0
@@ -66,8 +69,12 @@
     m = ((r & 0xFF000) >> 12) + 8;
     p = ((r & 0x003F0) >> 4) + 2;
     s = r & 0x3;
-
+#ifndef CONFIG_S3C2440
     return((CONFIG_SYS_CLK_FREQ * m) / (p << s));
+#else
+    /* To avoid integer overflow, changed the calc order */
+    return( 2 * m * (CONFIG_SYS_CLK_FREQ / (p << s )) );
+#endif
 }
 
 /* return FCLK frequency */
@@ -81,7 +88,21 @@
 {
     S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
 
+#ifndef CONFIG_S3C2440
     return((clk_power->CLKDIVN & 0x2) ? get_FCLK()/2 : get_FCLK());
+#else
+    switch (clk_power->CLKDIVN & 0x6) {
+        case 0x0:
+	    return get_FCLK();
+	case 0x2:
+	    return get_FCLK()/2;
+	case 0x4:
+	    return (clk_power->CAMDIVN & 0x200) ? get_FCLK()/8 : get_FCLK()/4;
+	case 0x6:
+	    return (clk_power->CAMDIVN & 0x100) ? get_FCLK()/6 : get_FCLK()/3;
+    }
+    return 0;
+#endif
 }
 
 /* return PCLK frequency */
@@ -98,4 +119,5 @@
     return(get_PLLCLK(UPLL));
 }
 
-#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
+#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) ||
+          defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) */
Index: u-boot/cpu/arm920t/s3c24x0/interrupts.c
===================================================================
--- u-boot.orig/cpu/arm920t/s3c24x0/interrupts.c
+++ u-boot/cpu/arm920t/s3c24x0/interrupts.c
@@ -30,13 +30,16 @@
  */
 
 #include <common.h>
-#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
+#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || \
+    defined(CONFIG_S3C2440) || defined (CONFIG_TRAB)
 
 #include <arm920t.h>
 #if defined(CONFIG_S3C2400)
 #include <s3c2400.h>
 #elif defined(CONFIG_S3C2410)
 #include <s3c2410.h>
+#elif defined(CONFIG_S3C2440)
+#include <s3c2440.h>
 #endif
 
 int timer_load_val = 0;
@@ -59,6 +62,7 @@
 	/* use PWM Timer 4 because it has no output */
 	/* prescaler for Timer 4 is 16 */
 	timers->TCFG0 = 0x0f00;
+#ifndef CONFIG_S3C2440
 	if (timer_load_val == 0)
 	{
 		/*
@@ -68,6 +72,9 @@
 		 */
 		timer_load_val = get_PCLK()/(2 * 16 * 100);
 	}
+#else
+	timer_load_val = get_PCLK()/(2 * 16 * 100);
+#endif
 	/* load value for 10 ms timeout */
 	lastdec = timers->TCNTB4 = timer_load_val;
 	/* auto load, manual update of Timer 4 */
@@ -178,6 +185,7 @@
 	tbclk = timer_load_val * 100;
 #elif defined(CONFIG_SBC2410X) || \
       defined(CONFIG_SMDK2410) || \
+      defined(CONFIG_SMDK2440) || \
       defined(CONFIG_VCMA9)
 	tbclk = CFG_HZ;
 #else
@@ -232,4 +240,5 @@
 }
 #endif /* USE_IRQ */
 
-#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
+#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) ||
+	  defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) */
Index: u-boot/cpu/arm920t/s3c24x0/serial.c
===================================================================
--- u-boot.orig/cpu/arm920t/s3c24x0/serial.c
+++ u-boot/cpu/arm920t/s3c24x0/serial.c
@@ -19,12 +19,15 @@
  */
 
 #include <common.h>
-#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
+#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || \
+    defined(CONFIG_S3C2440) || defined (CONFIG_TRAB)
 
 #if defined(CONFIG_S3C2400) || defined(CONFIG_TRAB)
 #include <s3c2400.h>
 #elif defined(CONFIG_S3C2410)
 #include <s3c2410.h>
+#elif defined(CONFIG_S3C2440)
+#include <s3c2440.h>
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -180,4 +183,5 @@
 	}
 }
 
-#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
+#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) ||
+	  defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) */
Index: u-boot/cpu/arm920t/s3c24x0/i2c.c
===================================================================
--- u-boot.orig/cpu/arm920t/s3c24x0/i2c.c
+++ u-boot/cpu/arm920t/s3c24x0/i2c.c
@@ -34,6 +34,8 @@
 #include <s3c2400.h>
 #elif defined(CONFIG_S3C2410)
 #include <s3c2410.h>
+#elif defined(CONFIG_S3C2440)
+#include <s3c2440.h>
 #endif
 #include <i2c.h>
 
@@ -63,7 +65,7 @@
 {
 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
-#ifdef CONFIG_S3C2410
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 	return (gpio->GPEDAT & 0x8000) >> 15;
 #endif
 #ifdef CONFIG_S3C2400
@@ -82,7 +84,7 @@
 {
 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
-#ifdef CONFIG_S3C2410
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 	gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) | (x&1) << 14;
 #endif
 #ifdef CONFIG_S3C2400
@@ -139,7 +141,7 @@
 	}
 
 	if ((status & I2CSTAT_BSY) || GetI2CSDA () == 0) {
-#ifdef CONFIG_S3C2410
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 		ulong old_gpecon = gpio->GPECON;
 #endif
 #ifdef CONFIG_S3C2400
@@ -147,7 +149,7 @@
 #endif
 		/* bus still busy probably by (most) previously interrupted transfer */
 
-#ifdef CONFIG_S3C2410
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 		/* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
 		gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000;
 #endif
@@ -171,7 +173,7 @@
 		udelay (1000);
 
 		/* restore pin functions */
-#ifdef CONFIG_S3C2410
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 		gpio->GPECON = old_gpecon;
 #endif
 #ifdef CONFIG_S3C2400
Index: u-boot/drivers/usbdcore_s3c2410.c
===================================================================
--- u-boot.orig/drivers/usbdcore_s3c2410.c
+++ u-boot/drivers/usbdcore_s3c2410.c
@@ -24,7 +24,7 @@
 
 #include <config.h>
 
-#if defined(CONFIG_S3C2410) && defined(CONFIG_USB_DEVICE)
+#if (defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)) && defined(CONFIG_USB_DEVICE)
 
 #include <common.h>
 
Index: u-boot/drivers/usbtty.h
===================================================================
--- u-boot.orig/drivers/usbtty.h
+++ u-boot/drivers/usbtty.h
@@ -29,7 +29,7 @@
 #include "usbdcore_mpc8xx.h"
 #elif defined(CONFIG_OMAP1510)
 #include "usbdcore_omap1510.h"
-#elif defined(CONFIG_S3C2410)
+#elif defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 #include "usbdcore_s3c2410.h"
 #endif
 
Index: u-boot/cpu/arm920t/start.S
===================================================================
--- u-boot.orig/cpu/arm920t/start.S
+++ u-boot/cpu/arm920t/start.S
@@ -31,7 +31,11 @@
 
 #include <config.h>
 #include <version.h>
+#if defined(CONFIG_S3C2410)
 #include <s3c2410.h>
+#elif defined(CONFIG_S3C2440)
+#include <s3c2440.h>
+#endif
 
 
 /*
@@ -142,14 +146,32 @@
 # define pWTCON		0x15300000
 # define INTMSK		0x14400008	/* Interupt-Controller base addresses */
 # define CLKDIVN	0x14800014	/* clock divisor register */
-#elif defined(CONFIG_S3C2410)
+#elif defined(CONFIG_S3C2410) || defined (CONFIG_S3C2440)
 # define pWTCON		0x53000000
 # define INTMSK		0x4A000008	/* Interupt-Controller base addresses */
 # define INTSUBMSK	0x4A00001C
 # define CLKDIVN	0x4C000014	/* clock divisor register */
 #endif
 
-#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
+#if defined(CONFIG_S3C2410)
+# define INTSUBMSK_val	0x7ff
+# define MPLLCON_val	((0x90 << 12) + (0x7 << 4) + 0x0)	/* 202 MHz */
+# define UPLLCON_val	((0x78 << 12) + (0x2 << 4) + 0x3)
+# define CLKDIVN_val	3 /* FCLK:HCLK:PCLK = 1:2:4 */
+#elif defined(CONFIG_S3C2440)
+# define INTSUBMSK_val	0xffff
+#if (CONFIG_SYS_CLK_FREQ == 16934400)
+# define MPLLCON_val	((0x61 << 12) + (0x1 << 4) + 0x2)	/* 296.35 MHz */
+# define UPLLCON_val	((0x3c << 12) + (0x4 << 4) + 0x2)	/*  47.98 MHz */
+#else if (CONFIG_SYS_CLK_FREQ == 12000000)
+# define MPLLCON_val	((0x44 << 12) + (0x1 << 4) + 0x1)	/* 304.00 MHz */
+# define UPLLCON_val	((0x38 << 12) + (0x2 << 4) + 0x2)	/*  48.00 MHz */
+#endif
+# define CLKDIVN_val	7 /* FCLK:HCLK:PCLK = 1:3:6 */
+# define CAMDIVN	0x4C000018
+#endif
+
+#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 	ldr     r0, =pWTCON
 	mov     r1, #0x0
 	str     r1, [r0]
@@ -160,24 +182,34 @@
 	mov	r1, #0xffffffff
 	ldr	r0, =INTMSK
 	str	r1, [r0]
-# if defined(CONFIG_S3C2410)
-	ldr	r1, =0x3ff
+# if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
+	ldr	r1, =INTSUBMSK_val
 	ldr	r0, =INTSUBMSK
 	str	r1, [r0]
 # endif
 
-	/* default FCLK is 202 MHz ! */
+#if defined(CONFIG_S3C2440)
+	/* Make sure we get FCLK:HCLK:PCLK = 1:3:6 */
+	ldr	r0, =CAMDIVN
+	mov	r1, #0
+	str	r1, [r0]
+#endif
+
+	/* Clock asynchronous mode */
+	mrc	p15, 0, r1, c1, c0, 0
+	orr	r1, r1, #0xc0000000
+	mcr	p15, 0, r1, c1, c0, 0
+
+
 #define LOCKTIME	0x4c000000
 #define UPLLCON		0x4c000008
-//#define MPLLCFG		((0x90 << 12) + (0x2 << 4) + 0x2)
-#define MPLLCFG		((0x90 << 12) + (0x7 << 4) + 0x0)
-#define UPLLCFG		((0x78 << 12) + (0x2 << 4) + 0x3)
+
 	ldr	r0, =LOCKTIME
 	mov	r1, #0xffffff
 	str	r1, [r0]
 
 	ldr	r0, =UPLLCON
-	ldr	r1, =UPLLCFG
+	ldr	r1, =UPLLCON_val
 	str	r1, [r0]
 
 	/* Page 7-19, seven nops between UPLL and MPLL */
@@ -189,12 +221,12 @@
 	nop
 	nop
 
-	ldr	r1, =MPLLCFG
+	ldr	r1, =MPLLCON_val
 	str	r1, [r0, #-4]		/* MPLLCON */
 
 	/* FCLK:HCLK:PCLK = 1:2:4 */
 	ldr	r0, =CLKDIVN
-	mov	r1, #3
+	mov	r1, #CLKDIVN_val
 	str	r1, [r0]
 
 #if 1
@@ -222,7 +254,7 @@
 	str	r1, [r0, #0x28]
 #endif
 
-#endif	/* CONFIG_S3C2400 || CONFIG_S3C2410 */
+#endif	/* CONFIG_S3C2400 || CONFIG_S3C2410 || CONFIG_S3C2440 */
 
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #ifndef CONFIG_LL_INIT_NAND_ONLY
@@ -279,7 +311,7 @@
 #if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && defined(CONFIG_LL_INIT_NAND_ONLY)
 	bl	cpu_init_crit
 #endif
-#if defined(CONFIG_S3C2410)
+#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)
 	/* ensure some refresh has happened */
 	ldr	r1, =0xfffff
 1:	subs	r1, r1, #1
@@ -290,11 +322,12 @@
 	ldr	r0, [ r1 ]
 	tst	r0, #0x02		/* is this resume from power down */
 	ldrne	pc, [r1, #4]		/* gstatus3 */
-#endif /* CONFIG_S3C2410 */
+#endif /* CONFIG_S3C2410 || CONFIG_S3C2440 */
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
 
 	/* mov	r10, lr */
 
+#if defined(CONFIG_S3C2410)
 	@ reset NAND
 	mov	r1, #S3C2410_NAND_BASE
 	ldr	r2, =0xf842		@ initial value enable tacls=3,rph0=6,rph1=0
@@ -314,6 +347,17 @@
 	ldr	r2, [r1, #oNFCONF]
 	orr	r2, r2, #0x800		@ disable chip
 	str	r2, [r1, #oNFCONF]
+#elif defined(CONFIG_S3C2440)
+	mov	r1, #S3C2440_NAND_BASE
+	ldr	r2, =0xfff0		@ initial value tacls=3,rph0=7,rph1=7
+	ldr	r3, [r1, #oNFCONF]
+	orr	r3, r3, r2
+	str	r3, [r1, #oNFCONF]
+
+	ldr	r3, [r1, #oNFCONT]
+	orr	r3, r3, #1		@ enable nand controller
+	str	r3, [r1, #oNFCONT]
+#endif
 
 #if 0
 	@ get ready to call C functions (for nand_read())
@@ -382,7 +426,7 @@
 #endif /* CONFIG_S3C2410_NAND_BOOT */
 done_relocate:
 
-#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C2410)
+#if defined(CONFIG_USE_IRQ) && (defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440))
 	/* In the case of the S3C2410, if we've somehow magically (JTAG, ...)
 	   ended up in RAM, then that ram is mapped to 0x30000000 and not 0.
 	   So we need to copy the interrupt vectors, etc.  */
Index: u-boot/cpu/arm920t/s3c24x0/nand_read.c
===================================================================
--- u-boot.orig/cpu/arm920t/s3c24x0/nand_read.c
+++ u-boot/cpu/arm920t/s3c24x0/nand_read.c
@@ -16,30 +16,141 @@
  */
 
 #include <common.h>
+#include <linux/mtd/nand.h>
 
 #ifdef CONFIG_S3C2410_NAND_BOOT
 
 #define __REGb(x)	(*(volatile unsigned char *)(x))
+#define __REGw(x)	(*(volatile unsigned short *)(x))
 #define __REGi(x)	(*(volatile unsigned int *)(x))
 #define NF_BASE		0x4e000000
+#if defined(CONFIG_S3C2410)
 #define NFCONF		__REGi(NF_BASE + 0x0)
 #define NFCMD		__REGb(NF_BASE + 0x4)
 #define NFADDR		__REGb(NF_BASE + 0x8)
 #define NFDATA		__REGb(NF_BASE + 0xc)
 #define NFSTAT		__REGb(NF_BASE + 0x10)
+#define NFSTAT_BUSY	1
+#define nand_select()	(NFCONF &= ~0x800)
+#define nand_deselect()	(NFCONF |= 0x800)
+#define nand_clear_RnB()	do {} while (0)
+#elif defined(CONFIG_S3C2440)
+#define NFCONF		__REGi(NF_BASE + 0x0)
+#define NFCONT		__REGi(NF_BASE + 0x4)
+#define NFCMD		__REGb(NF_BASE + 0x8)
+#define NFADDR		__REGb(NF_BASE + 0xc)
+#define NFDATA		__REGb(NF_BASE + 0x10)
+#define NFDATA16	__REGw(NF_BASE + 0x10)
+#define NFSTAT		__REGb(NF_BASE + 0x20)
+#define NFSTAT_BUSY	1
+#define nand_select()	(NFCONT &= ~(1 << 1))
+#define nand_deselect()	(NFCONT |= (1 << 1))
+#define nand_clear_RnB()	(NFSTAT |= (1 << 2))
+#endif
 
-#define BUSY 1
-inline void wait_idle(void)
+static inline void nand_wait(void)
 {
 	int i;
 
-	while (!(NFSTAT & BUSY))
+	while (!(NFSTAT & NFSTAT_BUSY))
 		for (i=0; i<10; i++);
 }
 
-#define NAND_SECTOR_SIZE	512
-#define NAND_BLOCK_MASK		(NAND_SECTOR_SIZE - 1)
-#define NAND_PAGE_SIZE		0x4000
+#if defined(CONFIG_S3C2410)
+/* configuration for 2410 with 512byte sized flash */
+#define NAND_PAGE_SIZE		512
+#define BAD_BLOCK_OFFSET	517
+#define NAND_BLOCK_MASK		(NAND_PAGE_SIZE - 1)
+#define NAND_BLOCK_SIZE		0x4000
+#else
+/* configuration for 2440 with 2048byte sized flash */
+#define NAND_5_ADDR_CYCLE
+#define NAND_PAGE_SIZE		2048
+#define BAD_BLOCK_OFFSET	NAND_PAGE_SIZE
+#define	NAND_BLOCK_MASK		(NAND_PAGE_SIZE - 1)
+#define NAND_BLOCK_SIZE		(NAND_PAGE_SIZE * 64)
+#endif
+
+/* compile time failure in case of an invalid configuration */
+#if defined(CONFIG_S3C2410) && (NAND_PAGE_SIZE != 512)
+#error "S3C2410 does not support nand page size != 512"
+#endif
+
+static int is_bad_block(unsigned long i)
+{
+	unsigned char data;
+	unsigned long page_num;
+
+	/* FIXME: do this twice, for first and second page in block */
+
+	nand_clear_RnB();
+#if (NAND_PAGE_SIZE == 512)
+	NFCMD = NAND_CMD_READOOB; /* 0x50 */
+	NFADDR = BAD_BLOCK_OFFSET & 0xf;
+	NFADDR = (i >> 9) & 0xff;
+	NFADDR = (i >> 17) & 0xff;
+	NFADDR = (i >> 25) & 0xff;
+#elif (NAND_PAGE_SIZE == 2048)
+	page_num = i >> 11; /* addr / 2048 */
+	NFCMD = NAND_CMD_READ0;
+	NFADDR = BAD_BLOCK_OFFSET & 0xff;
+	NFADDR = (BAD_BLOCK_OFFSET >> 8) & 0xff;
+	NFADDR = page_num & 0xff;
+	NFADDR = (page_num >> 8) & 0xff;
+	NFADDR = (page_num >> 16) & 0xff;
+	NFCMD = NAND_CMD_READSTART;
+#endif
+	nand_wait();
+	data = (NFDATA & 0xff);
+	if (data != 0xff)
+		return 1;
+
+	return 0;
+}
+
+static int nand_read_page_ll(unsigned char *buf, unsigned long addr)
+{
+	unsigned short *ptr16 = (unsigned short *)buf;
+	unsigned int i, page_num;
+
+	nand_clear_RnB();
+
+	NFCMD = NAND_CMD_READ0;
+
+#if (NAND_PAGE_SIZE == 512)
+	/* Write Address */
+	NFADDR = addr & 0xff;
+	NFADDR = (addr >> 9) & 0xff;
+	NFADDR = (addr >> 17) & 0xff;
+	NFADDR = (addr >> 25) & 0xff;
+#elif (NAND_PAGE_SIZE == 2048)
+	page_num = addr >> 11; /* addr / 2048 */
+	/* Write Address */
+	NFADDR = 0;
+	NFADDR = 0;
+	NFADDR = page_num & 0xff;
+	NFADDR = (page_num >> 8) & 0xff;
+	NFADDR = (page_num >> 16) & 0xff;
+	NFCMD = NAND_CMD_READSTART;
+#else
+#error "unsupported nand page size"
+#endif
+	nand_wait();
+
+#if defined(CONFIG_S3C2410)
+	for (i = 0; i < NAND_PAGE_SIZE; i++) {
+		*buf = (NFDATA & 0xff);
+		buf++;
+	}
+#elif defined(CONFIG_S3C2440)
+	for (i = 0; i < NAND_PAGE_SIZE/2; i++) {
+		*ptr16 = NFDATA16;
+		ptr16++;
+	}
+#endif
+
+	return NAND_PAGE_SIZE;
+}
 
 /* low level nand read function */
 int nand_read_ll(unsigned char *buf, unsigned long start_addr, int size)
@@ -50,47 +161,28 @@
 		return -1;	/* invalid alignment */
 
 	/* chip Enable */
-	NFCONF &= ~0x800;
+	nand_select();
+	nand_clear_RnB();
 	for (i=0; i<10; i++);
 
 	for (i=start_addr; i < (start_addr + size);) {
 #ifdef CONFIG_S3C2410_NAND_SKIP_BAD
-		if (start_addr % NAND_PAGE_SIZE == 0) {
-			unsigned char data;
-			NFCMD = 0x50;
-			NFADDR = 517&0xf;
-			NFADDR = (i >> 9) & 0xff;
-			NFADDR = (i >> 17) & 0xff;
-			NFADDR = (i >> 25) & 0xff;
-			wait_idle();
-			data = (NFDATA & 0xff);
-			if (data != 0xff) {
+		if (start_addr % NAND_BLOCK_SIZE == 0) {
+			if (is_bad_block(i)) {
 				/* Bad block */
-				i += NAND_PAGE_SIZE;
-				size += NAND_PAGE_SIZE;
+				i += NAND_BLOCK_SIZE;
+				size += NAND_BLOCK_SIZE;
 				continue;
 			}
 		}
 #endif
-		/* READ0 */
-		NFCMD = 0;
-
-		/* Write Address */
-		NFADDR = i & 0xff;
-		NFADDR = (i >> 9) & 0xff;
-		NFADDR = (i >> 17) & 0xff;
-		NFADDR = (i >> 25) & 0xff;
-
-		wait_idle();
-
-		for (j=0; j < NAND_SECTOR_SIZE; j++, i++) {
-			*buf = (NFDATA & 0xff);
-			buf++;
-		}
+		j = nand_read_page_ll(buf, i);
+		i += j;
+		buf += j;
 	}
 
 	/* chip Disable */
-	NFCONF |= 0x800;	/* chip disable */
+	nand_deselect();
 
 	return 0;
 }
Index: u-boot/cpu/arm920t/s3c24x0/nand.c
===================================================================
--- u-boot.orig/cpu/arm920t/s3c24x0/nand.c
+++ u-boot/cpu/arm920t/s3c24x0/nand.c
@@ -36,24 +36,54 @@
 #define __REGi(x)	(*(volatile unsigned int *)(x))
 
 #define	NF_BASE		0x4e000000
+
 #define	NFCONF		__REGi(NF_BASE + 0x0)
-#define	NFCMD		__REGb(NF_BASE + 0x4)
-#define	NFADDR		__REGb(NF_BASE + 0x8)
-#define	NFDATA		__REGb(NF_BASE + 0xc)
-#define	NFSTAT		__REGb(NF_BASE + 0x10)
+
+#if defined(CONFIG_S3C2410)
+
+#define oNFCMD		0x4
+#define	oNFADDR		0x8
+#define oNFDATA		0xc
+#define oNFSTAT		0x10
 #define NFECC0		__REGb(NF_BASE + 0x14)
 #define NFECC1		__REGb(NF_BASE + 0x15)
 #define NFECC2		__REGb(NF_BASE + 0x16)
+#define NFCONF_nFCE	(1<<11)
 
 #define S3C2410_NFCONF_EN          (1<<15)
 #define S3C2410_NFCONF_512BYTE     (1<<14)
 #define S3C2410_NFCONF_4STEP       (1<<13)
 #define S3C2410_NFCONF_INITECC     (1<<12)
-#define S3C2410_NFCONF_nFCE        (1<<11)
 #define S3C2410_NFCONF_TACLS(x)    ((x)<<8)
 #define S3C2410_NFCONF_TWRPH0(x)   ((x)<<4)
 #define S3C2410_NFCONF_TWRPH1(x)   ((x)<<0)
 
+#elif defined(CONFIG_S3C2440)
+
+#define oNFCMD		0x8
+#define oNFADDR		0xc
+#define oNFDATA		0x10
+#define oNFSTAT		0x20
+
+#define	NFCONT		__REGi(NF_BASE + 0x04)
+#define	NFMECC0		__REGi(NF_BASE + 0x2C)
+#define NFCONF_nFCE	(1<<1)
+#define S3C2440_NFCONF_INITECC		(1<<4)
+#define S3C2440_NFCONF_MAINECCLOCK	(1<<5)
+#define nand_select()		(NFCONT &= ~(1 << 1))
+#define nand_deselect()		(NFCONT |= (1 << 1))
+#define nand_clear_RnB()	(NFSTAT |= (1 << 2))
+#define nand_detect_RB()	{ while(!(NFSTAT&(1<<2))); }
+#define nand_wait()		{ while(!(NFSTAT & 0x4)); } /* RnB_TransDectect */
+
+#endif
+
+#define	NFCMD		__REGb(NF_BASE + oNFCMD)
+#define	NFADDR		__REGb(NF_BASE + oNFADDR)
+#define	NFDATA		__REGb(NF_BASE + oNFDATA)
+#define	NFSTAT		__REGb(NF_BASE + oNFSTAT)
+
+
 static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd)
 {
 	struct nand_chip *chip = mtd->priv;
@@ -62,23 +92,31 @@
 
 	switch (cmd) {
 	case NAND_CTL_SETNCE:
-		NFCONF &= ~S3C2410_NFCONF_nFCE;
+#if defined(CONFIG_S3C2410)
+		NFCONF &= ~NFCONF_nFCE;
+#elif defined(CONFIG_S3C2440)
+		NFCONT &= ~NFCONF_nFCE;
+#endif
 		DEBUGN("NFCONF=0x%08x\n", NFCONF);
 		break;
 	case NAND_CTL_CLRNCE:
-		NFCONF |= S3C2410_NFCONF_nFCE;
+#if defined(CONFIG_S3C2410)
+		NFCONF |= NFCONF_nFCE;
+#elif defined(CONFIG_S3C2440)
+		NFCONT &= ~NFCONF_nFCE;
+#endif
 		DEBUGN("NFCONF=0x%08x\n", NFCONF);
 		break;
 	case NAND_CTL_SETALE:
-		chip->IO_ADDR_W = NF_BASE + 0x8;
+		chip->IO_ADDR_W = NF_BASE + oNFADDR;
 		DEBUGN("SETALE\n");
 		break;
 	case NAND_CTL_SETCLE:
-		chip->IO_ADDR_W = NF_BASE + 0x4;
+		chip->IO_ADDR_W = NF_BASE + oNFCMD;
 		DEBUGN("SETCLE\n");
 		break;
 	default:
-		chip->IO_ADDR_W = NF_BASE + 0xc;
+		chip->IO_ADDR_W = NF_BASE + oNFDATA;
 		break;
 	}
 	return;
@@ -180,16 +218,21 @@
 	/* initialize hardware */
 	twrph0 = 3; twrph1 = 0; tacls = 0;
 
+#if defined(CONFIG_S3C2410)
 	cfg = S3C2410_NFCONF_EN;
 	cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
 	cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
 	cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
 
 	NFCONF = cfg;
-	//NFCONF = 0xf842;
+#elif defined(CONFIG_S3C2440)
+	twrph0 = 7; twrph1 = 7; tacls = 7;
+	NFCONF = (tacls<<12)|(twrph0<<8)|(twrph1<<4)|(0<<0);
+	NFCONT = (0<<13)|(0<<12)|(0<<10)|(0<<9)|(0<<8)|(1<<6)|(1<<5)|(1<<4)|(1<<1)|(1<<0);
+#endif
 
 	/* initialize nand_chip data structure */
-	nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c;
+	nand->IO_ADDR_R = nand->IO_ADDR_W = NF_BASE + oNFDATA;
 
 	/* read_buf and write_buf are default */
 	/* read_byte and write_byte are default */
@@ -214,12 +257,23 @@
 	nand->options = 0;
 #endif
 
+#if defined(CONFIG_S3C2440)
+/*
+	nand_select();
+	nand_clear_RnB();
+	NFCMD = NAND_CMD_RESET;
+	{ volatile int i; for (i = 0; i < 10; i ++); }
+	nand_detect_RB();
+	nand_deselect();
+*/
+#endif
+
 	DEBUGN("end of nand_init\n");
 
 	return 0;
 }
 
 #else
- #error "U-Boot legacy NAND support not available for S3C2410"
+ #error "U-Boot legacy NAND support not available for S3C24xx"
 #endif
 #endif
Index: u-boot/cpu/arm920t/s3c24x0/mmc.c
===================================================================
--- u-boot.orig/cpu/arm920t/s3c24x0/mmc.c
+++ u-boot/cpu/arm920t/s3c24x0/mmc.c
@@ -137,6 +137,9 @@
 	dcon |= S3C2410_SDIDCON_RXAFTERCMD|S3C2410_SDIDCON_XFER_RXSTART;
 	if (wide)
 		dcon |= S3C2410_SDIDCON_WIDEBUS;
+#if defined(CONFIG_S3C2440)
+	dcon |= S3C2440_SDIDCON_DS_WORD | S3C2440_SDIDCON_DATSTART;
+#endif
 	sdi->SDIDCON = dcon;
 
 	/* send read command */
@@ -394,13 +397,18 @@
 
 	clk_power->CLKCON |= (1 << 9);
 
+	sdi->SDIBSIZE = 512;
+#if defined(CONFIG_S3C2410)
 	/* S3C2410 has some bug that prevents reliable operation at higher speed */
 	//sdi->SDIPRE = 0x3e;  /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */
-	sdi->SDIPRE = 0x02;  /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */
-	sdi->SDIBSIZE = 512;
+	sdi->SDIPRE = 0x02;  /* 2410: SDCLK = PCLK/2 / (SDIPRE+1) = 11MHz */
 	sdi->SDIDTIMER = 0xffff;
+#elif defined(CONFIG_S3C2440)
+	sdi->SDIPRE = 0x05;  /* 2410: SDCLK = PCLK / (SDIPRE+1) = 11MHz */
+	sdi->SDIDTIMER = 0x7fffff;
+#endif
 	sdi->SDIIMSK = 0x0;
-	sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2440_SDICON_MMCCLOCK;
+	sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2410_SDICON_CLOCKTYPE;
 	udelay(125000); /* FIXME: 74 SDCLK cycles */
 
 	mmc_csd.c_size = 0;