Index: u-boot-1.3.2/common/cmd_capsense.c =================================================================== --- /dev/null +++ u-boot-1.3.2/common/cmd_capsense.c @@ -0,0 +1,105 @@ +/* + * (C) Copyright 2008 + * Alexandre Coffignal, CénoSYS, alexandre.coffignal@cenosys.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * CapSense Express touch-sensing buttons + */ + +#include +#include +#include + +#include +#include + +#define ARG_SENSOR_NUMBER 1 + +#define ARG_CMD 1 +#define ARG_OLD_ADDRESS 2 + + +int do_capsense (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + int i; + unsigned char sensors[] = CONFIG_CAPSENSE_SENSORS; + int old_bus, old_address; + char port[2]; + /* switch to correct I2C bus */ + old_bus = I2C_GET_BUS(); + I2C_SET_BUS(CFG_CAPSENSE_BUS_NUM); + + /* + * Loop through sensors, read + * state, and output it. + */ + if(argc==1) + { + port[0]=capsense_get_state(CONFIG_CAPSENSE_I2C_ADDRESS,0); + port[1]=capsense_get_state(CONFIG_CAPSENSE_I2C_ADDRESS,1); + capsense_get_state(CONFIG_CAPSENSE_I2C_ADDRESS,1); + printf ("P0 0x%02x 0x%02x\n",port[0],port[1]); + for (i = 0; i < 8; i++) + { + if(sensors[0]&(1<help); + } + } + + /* switch back to original I2C bus */ + I2C_SET_BUS(old_bus); + + return 0; +} /* do_capsense() */ + + +/***************************************************/ + +U_BOOT_CMD( + capsense, 4, 1, do_capsense, + "capsense - CapSense Express touch-sensing buttons\n", + "capsense\n Read state of the CapSense Express touch-sensing buttons.\n" + "capsense config []\n Setup default capsense configuration.\n" + ); Index: u-boot-1.3.2/common/Makefile =================================================================== --- u-boot-1.3.2.orig/common/Makefile +++ u-boot-1.3.2/common/Makefile @@ -50,6 +50,7 @@ endif COBJS-$(CONFIG_CMD_DISPLAY) += cmd_display.o COBJS-$(CONFIG_CMD_DOC) += cmd_doc.o COBJS-$(CONFIG_CMD_DTT) += cmd_dtt.o +COBJS-$(CONFIG_CMD_CAPSENSE) += cmd_capsense.o COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o COBJS-y += cmd_eeprom.o COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o Index: u-boot-1.3.2/drivers/i2c/CY8C201xx.c =================================================================== --- /dev/null +++ u-boot-1.3.2/drivers/i2c/CY8C201xx.c @@ -0,0 +1,289 @@ +/* + * (C) Copyright 2008 + * Alexandre Coffignal, CénoSYS, alexandre.coffignal@cenosys.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * CapSense Express touch-sensing buttons + */ + +#include + +#ifdef CONFIG_CAPSENSE_CY8C201XX + +#include +#include + +int capsense_read(int address, int reg) +{ + int dlen; + uchar data[2]; + + /* + * Validate 'reg' param + */ + if ( (reg < 0) || (reg > 0xA1) ) + return -1; + + /* + * Prepare to handle 1 byte result. + */ + dlen = 1; + + /* + * Now try to read the register. + */ + if (i2c_read(address, reg, 1, data, dlen) != 0) + return -1; + + return (int)data[0]; +} + + +int capsense_write(int address, int reg, int val) +{ + int dlen; + uchar data[2]; + + /* + * Validate 'reg' param + */ + if((reg < 0) || (reg > 0xA1)) + return -1; + + /* + * Handle 1 byte values. + */ + dlen = 1; + data[0] = (char)(val & 0xff); + + /* + * Write value to register. + */ + if (i2c_write(address, reg, 1, data, dlen) != 0) + return 1; + + return 0; +} + + +int capsense_write_N(int address, int reg, char *data, int dlen) +{ + /* + * Validate 'reg' param + */ + if ( (reg < 0) || (reg > 0xA1) ) + return -1; + + /* + * Write value to register. + */ + if ( i2c_write(address, reg, 1, data, dlen) != 0 ) + return 1; + + return 0; +} + + +int capsense_get_state(int address,char port) +{ + return capsense_read(address,CAPSENSE_REG_READ_STATUS+port); +} + + +int capsense_change_i2c_address(char old_address,char new_address) +{ + unsigned char data[4]; + int read_address; + printf("capsense change i2c address\n"); + //checking if the I2C address is in the limits ( I2C address can have a value from 0 to 127 ) + if((old_address>0x7F)||(new_address>0x7F)) + { + printf("I2C address is not in the limits\n"); + return 1; + } + + //reading old capsence address + read_address=capsense_read(old_address, CAPSENSE_REG_I2C_ADDR_DM); + if(read_address==0xFFFFFFFF) + { + printf("error reading old capsence address\n"); + return 1; //capsense do not respond at new address + } + + if((read_address&0x7F)!=old_address) + { + printf("reading old capsence address failed\n"); + return 1; //Capsense not respond correctly + } + + //writing command for unlocking the I2C device address lock + data[0]=0x3C; + data[1]=0xA5; + data[2]=0x69; + if(capsense_write_N(old_address, CAPSENSE_REG_I2C_DEV_LOCK, data , 3)!=0) + { + printf("writing command for unlocking the I2C device address lock failed\n"); + return 1; + } + + //writing the new I2C address to the device I2C address register + if(capsense_write(old_address, CAPSENSE_REG_I2C_ADDR_DM,new_address|0x80)!=0) + { + printf("writing the new I2C address to the device I2C address register failed\n"); + return 1; + } + + //writing command for locking the I2C device address lock + data[0]=0x96; + data[1]=0x5A; + data[2]=0xC3; + if(capsense_write_N(old_address, CAPSENSE_REG_I2C_DEV_LOCK, data , 3)!=0) + { + printf("writing command for locking the I2C device failed\n"); + return 1; + } + + //reading new capsence address + read_address=capsense_read(new_address, CAPSENSE_REG_I2C_ADDR_DM); + if(read_address==0xFFFFFFFF) + { + printf("capsense do not respond at new address\n"); + return 1; //capsense do not respond at new address + } + + return 0; +} + + +static char data_GPIO_ENABLE[] = { + 0x00, 0x00 // GPIO_ENABLE +}; + +static char data_CS_ENABLE[] = { + 0x1D, 0x10, // CS_ENABLE + 0x02, 0x0F, // GPIO_ENABLE + 0x00, 0x00, // INVERSION_MASK + 0x00, 0x00, // INT_MASK + 0x1F, 0x1F, // STATUS_HOLD_MSK + 0x00, 0x02, 0x00, 0x00, // DM_PULL_UP0, DM_STRONG0, DM_HIGHZ0, DM_OD_LOW0 + 0x00, 0x0F, 0x00, 0x00, // DM_PULL_UP1, DM_STRONG1, DM_HIGHZ1, DM_OD_LOW1 +}; + +static char data_OUTPUT_PORT[] = { + 0x00, 0x00 // OUTPUT_PORT +}; + +static char data_OP_SEL[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, // OP_SEL_00 + 0x80, 0x01, 0x00, 0x00, 0x00, // OP_SEL_01 + 0x00, 0x00, 0x00, 0x00, 0x00, // OP_SEL_02 + 0x00, 0x00, 0x00, 0x00, 0x00, // OP_SEL_03 + 0x00, 0x00, 0x00, 0x00, 0x00, // OP_SEL_04 + 0x80, 0x10, 0x00, 0x00, 0x00, // OP_SEL_10 + 0x80, 0x08, 0x00, 0x00, 0x00, // OP_SEL_11 + 0x80, 0x04, 0x00, 0x00, 0x00, // OP_SEL_12 + 0x80, 0x00, 0x10, 0x00, 0x00, // OP_SEL_13 + 0x00, 0x00, 0x00, 0x00, 0x00, // OP_SEL_14 +}; + +static char data_CS_NOISE_TH[] = { + 0x28, // CS_NOISE_TH + 0x64, // CS_BL_UPD_TH + 0xA0, // CS_SETL_TIME + 0x22, // CS_OTH_SET + 0x0A, // CS_HYSTERESIS + 0x03, // CS_DEBOUNCE + 0x14, // CS_NEG_NOISE_TH + 0x14, // CS_LOW_BL_RST + 0x00, // CS_FILTERING +}; + +static char data_CS_SCAN_POS[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, // CS_SCAN_POS_0x + 0x00, 0x00, 0x00, 0x00, 0x00, // CS_SCAN_POS_1x + 0x32, 0x00, 0x32, 0x32, 0x32, // CS_FINGER_TH_0x + 0x00, 0x00, 0x00, 0x00, 0x32, // CS_FINGER_TH_1x + 0x08, 0x00, 0x08, 0x08, 0x08, // CS_IDAC_0x + 0x00, 0x00, 0x00, 0x00, 0x08 // CS_IDAC_1x +}; + +static char data_SLEEP[] = { + 0x00, // SLEEP_PIN + 0x20, // SLEEP_CTRL + 0x00, // SLEEP_SA_CTR +}; + +int capsense_config(char address) +{ + printf("Setting default capsense configuration at i2c address 0x%02X...\n", address); + + //entering setup operation mode + if ( capsense_write(address, CAPSENSE_COMMAND_REG, CAPSENSE_CMD_SETUP_OPERATION_MODE) != 0 ) { + printf("CAPSENSE_COMMAND_REG SETUP_OPERATION_MODE\n"); + return 1; + } + if ( capsense_write_N(address, CAPSENSE_REG_GPIO_ENABLE, data_GPIO_ENABLE, sizeof(data_GPIO_ENABLE)) != 0 ) { + printf("CAPSENSE_REG_GPIO_ENABLE\n"); + return 1; + } + if ( capsense_write_N(address, CAPSENSE_REG_CS_ENABLE, data_CS_ENABLE, sizeof(data_CS_ENABLE)) != 0 ) { + printf("CAPSENSE_REG_CS_ENABLE\n"); + return 1; + } + if ( capsense_write_N(address, CAPSENSE_REG_OUTPUT_PORT, data_OUTPUT_PORT, sizeof(data_OUTPUT_PORT)) != 0 ) { + printf("CAPSENSE_REG_OUTPUT_PORT\n"); + return 1; + } + if ( capsense_write_N(address, CAPSENSE_REG_OP_SEL_0, data_OP_SEL, sizeof(data_OP_SEL)) != 0 ) { + printf("CAPSENSE_REG_OP_SEL_0\n"); + return 1; + } + if ( capsense_write_N(address, CAPSENSE_REG_CS_NOISE_TH, data_CS_NOISE_TH, sizeof(data_CS_NOISE_TH)) != 0 ) { + printf("CAPSENSE_REG_CS_NOISE_TH\n"); + return 1; + } + if ( capsense_write_N(address, CAPSENSE_REG_CS_SCAN_POS, data_CS_SCAN_POS, sizeof(data_CS_SCAN_POS)) != 0 ) { + printf("CAPSENSE_REG_CS_SCAN_POS\n"); + return 1; + } + if ( capsense_write_N(address, CAPSENSE_REG_SLEEP_PIN, data_SLEEP, sizeof(data_SLEEP)) != 0 ) { + printf("CAPSENSE_REG_SLEEP_PIN\n"); + return 1; + } + if ( capsense_write(address, CAPSENSE_COMMAND_REG, CAPSENSE_CMD_NORMAL_OPERATION_MODE) != 0 ) { + printf("CAPSENSE_COMMAND_REG NORMAL_OPERATION_MODE\n"); + return 1; + } + + printf("...done.\n"); + + return 0; +} + +void capsense_store_nvm(char address) +{ + //storing the new current configuration to NVM + printf("Storing capsense configuration to NVM\n"); + capsense_write(address, CAPSENSE_COMMAND_REG, CAPSENSE_CMD_STORE_TO_NVM); +} + +#endif /* CONFIG_CAPSENSE_CY8C201XX */ Index: u-boot-1.3.2/drivers/i2c/Makefile =================================================================== --- u-boot-1.3.2.orig/drivers/i2c/Makefile +++ u-boot-1.3.2/drivers/i2c/Makefile @@ -29,6 +29,7 @@ COBJS-y += fsl_i2c.o COBJS-y += omap1510_i2c.o COBJS-y += omap24xx_i2c.o COBJS-y += tsi108_i2c.o +COBJS-y += CY8C201xx.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) Index: u-boot-1.3.2/include/capsense.h =================================================================== --- /dev/null +++ u-boot-1.3.2/include/capsense.h @@ -0,0 +1,95 @@ +/* + * (C) Copyright 2008 + * Alexandre Coffignal, CénoSYS, alexandre.coffignal@cenosys.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USCY8C201xx.c:234:A + */ + +/* + * CapSense Express touch-sensing buttons. + */ +#ifndef _CAPSENSE_H_ +#define _CAPSENSE_H_ + +#if defined(CONFIG_CAPSENSE_CY8C201XX) + +#define CONFIG_CAPSENSE /* We have a Capsense */ + +#ifndef CONFIG_CAPSENSE_SENSORS +/*config for CY3218-CAPEXP1*/ +#define CONFIG_CAPSENSE_LED {0x05,0x02} // port 0-{0,3} port 1-{2} +#define CONFIG_CAPSENSE_SENSOR {0x02,0x0C} // port 0-{2} port 1-{3,4} +#endif +#endif /* CONFIG_CAPSENSE_SENSORS */ + +extern int capsense_read(int address, int reg); +extern int capsense_write(int address, int reg, int val); +extern int capsense_get_state(int address,char port); +extern int capsense_change_i2c_address(char old_address,char new_address); +extern int capsense_config(char address); +extern void capsense_store_nvm(char address); +#endif + +#if !defined(CFG_CAPSENSE_BUS_NUM) +#define CFG_CAPSENSE_BUS_NUM 1 + +//----------------------------------------------- +// Register Map and corresponding constants +//----------------------------------------------- + + +#define CAPSENSE_REG_STATUS_PORT 0x02 +#define CAPSENSE_REG_OUTPUT_PORT 0x04 +#define CAPSENSE_REG_CS_ENABLE 0x06 +#define CAPSENSE_REG_GPIO_ENABLE 0x08 +#define CAPSENSE_REG_INVERSION_MASK 0x0A +#define CAPSENSE_REG_INT_MASK 0x0C +#define CAPSENSE_REG_STATUS_HOLD_MSK 0x0E +#define CAPSENSE_REG_DRIVE_MODE 0x10 +#define CAPSENSE_REG_OP_SEL_0 0x1C +#define CAPSENSE_REG_OP_SEL_1 0x35 +#define CAPSENSE_REG_CS_NOISE_TH 0x4E +#define CAPSENSE_REG_CS_SETL_TIME 0x50 +#define CAPSENSE_REG_CS_OTH_SET 0x51 +#define CAPSENSE_REG_CS_HYSTERESIS 0x52 +#define CAPSENSE_REG_CS_DEBOUNCE 0x53 +#define CAPSENSE_REG_CS_NEG_NOISE_TH 0x54 +#define CAPSENSE_REG_CS_SCAN_POS 0x57 +#define CAPSENSE_REG_CS_FINGER_TH 0x61 +#define CAPSENSE_REG_CS_IDAC 0x6B +#define CAPSENSE_REG_CS_SLID_CONFIG 0x75 +#define CAPSENSE_REG_CS_SLID_MUL 0x77 +#define CAPSENSE_REG_I2C_DEV_LOCK 0x79 +#define CAPSENSE_REG_DEVICE_ID 0x7A +#define CAPSENSE_REG_I2C_ADDR_DM 0x7C +#define CAPSENSE_REG_SLEEP_PIN 0x7E +#define CAPSENSE_REG_SLEEP_CTRL 0x7F +#define CAPSENSE_REG_SLEEP_SA_CTR 0x80 +#define CAPSENSE_REG_CS_READ_BUTTON 0x81 +#define CAPSENSE_REG_CS_READ_BL 0x82 +#define CAPSENSE_REG_READ_STATUS 0x88 +#define CAPSENSE_REG_READ_CEN_POS 0x8A + +#define CAPSENSE_COMMAND_REG 0xA0 + +#define CAPSENSE_CMD_STORE_TO_NVM 0x01 +#define CAPSENSE_CMD_NORMAL_OPERATION_MODE 0x07 +#define CAPSENSE_CMD_SETUP_OPERATION_MODE 0x08 + +#endif /* _CAPSENSE_H_ */ Index: u-boot-1.3.2/include/configs/MPC8313ERDB.h =================================================================== --- u-boot-1.3.2.orig/include/configs/MPC8313ERDB.h +++ u-boot-1.3.2/include/configs/MPC8313ERDB.h @@ -407,6 +407,13 @@ #define CFG_DTT_MAX_TEMP 70 #define CFG_DTT_MIN_TEMP -30 +/*Capsense touch sensing buttons (Cpe board)*/ +#define CONFIG_CMD_CAPSENSE +#define CONFIG_CAPSENSE_CY8C201XX 1 +#define CONFIG_CAPSENSE_I2C_ADDRESS 0x25 +#define CONFIG_CAPSENSE_LEDS {0x02,0x0F} // port 0-{1} port 1-{0,1,2,3} +#define CONFIG_CAPSENSE_SENSORS {0x1D,0x10} // port 0-{0,2,3,4} port 1-{4} + /* * Miscellaneous configurable options */