diff -uprN u-boot-orig/board/atstk1000/ltv350qv.c u-boot/board/atstk1000/ltv350qv.c
--- u-boot-orig/board/atstk1000/ltv350qv.c	1970-01-01 01:00:00.000000000 +0100
+++ u-boot/board/atstk1000/ltv350qv.c	2007-01-02 15:17:32.000000000 +0100
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CONFIG_LCD
+#ifndef CONFIG_SPI
+#error No SPI controller for LCD setup, enable CFG_SPI
+#endif
+
+#include <spi.h>
+
+#ifdef CONFIG_ATMEL_SPI
+#include <atmel_spi.h>
+#endif
+
+static int ltv350qv_write_reg(u8 reg, u16 val)
+{
+	int ret;
+	u8 buffer[3];
+
+	buffer[0] = 0x74;
+	buffer[1] = 0x00;
+	buffer[2] = reg & 0x7f;
+
+	ret = spi_write(&buffer[0], 1, &buffer[1], 2);
+	if (ret != 3) {
+		printf("spi_write returned %d\n", ret);
+		return -1;
+	}
+
+	buffer[0] = 0x76;
+	buffer[1] = val >> 8;
+	buffer[2] = val;
+
+	ret = spi_write(&buffer[0], 1, &buffer[1], 2);
+	if (ret != 3) {
+		printf("spi_write returned %d\n", ret);
+		return -1;
+	}
+
+	return 0;
+}
+
+#define write_reg(reg, val)				\
+	do {						\
+		ret = ltv350qv_write_reg(reg, val);	\
+		if (ret)				\
+			goto out;			\
+	} while (0)
+
+void ltv350qv_power_on(void)
+{
+	int ret;
+
+#ifdef CONFIG_ATMEL_SPI
+	spi_select_chip(1);
+#endif
+
+	debug ("ltv350qv: do power on sequence\n");
+
+	/* write startup procedure */
+	write_reg(9, 0x0000);
+	udelay(15000);
+	write_reg(9, 0x4000);
+	write_reg(10, 0x2000);
+	write_reg(9, 0x4055);
+	udelay(55000);
+	write_reg(1, 0x409d);
+	write_reg(2, 0x0204);
+	write_reg(3, 0x0100);
+	write_reg(4, 0x3000);
+	write_reg(5, 0x4003);
+	write_reg(6, 0x000a);
+	write_reg(7, 0x0021);
+	write_reg(8, 0x0c00);
+	write_reg(10, 0x0103);
+	write_reg(11, 0x0301);
+	write_reg(12, 0x1f0f);
+	write_reg(13, 0x1f0f);
+	write_reg(14, 0x0707);
+	write_reg(15, 0x0307);
+	write_reg(16, 0x0707);
+	write_reg(17, 0x0000);
+	write_reg(18, 0x0004);
+	write_reg(19, 0x0000);
+
+	udelay(20000);
+	write_reg(9, 0x4a55);
+	write_reg(5, 0x5003);
+
+	debug ("ltv350qv: power on sequence done\n");
+out:
+	return;
+}
+
+void ltv350qv_power_off(void)
+{
+	int ret;
+
+#ifdef CONFIG_ATMEL_SPI
+	spi_select_chip(1);
+#endif
+
+	debug ("ltv350qv: do power off sequence\n");
+	/* GON -> 0, POC -> 0 */
+	write_reg(9, 0x4055);
+	/* DSC -> 0 */
+	write_reg(5, 0x4003);
+	/* VCOMG -> 0 */
+	write_reg(10, 0x2103);
+
+	udelay(1000000);
+
+	/* AP[2:0] -> 000 */
+	write_reg(9, 0x4050);
+
+	debug ("ltv350qv: power off sequence done\n");
+out:
+	return;
+}
+
+void ltv350qv_init(void)
+{
+	debug ("ltv350qv: initializing LTV350QV panel\n");
+	ltv350qv_power_on();
+}
+
+#endif
diff -uprN u-boot-orig/board/atstk1000/Makefile u-boot/board/atstk1000/Makefile
--- u-boot-orig/board/atstk1000/Makefile	2007-01-01 19:26:46.000000000 +0100
+++ u-boot/board/atstk1000/Makefile	2007-01-01 16:23:12.000000000 +0100
@@ -30,7 +30,7 @@ endif
 
 LIB		:= lib$(BOARD).a
 
-SRC		:= $(BOARD).c $(DAUGHTERBOARD).c eth.c flash.c
+SRC		:= $(BOARD).c $(DAUGHTERBOARD).c eth.c flash.c ltv350qv.c
 SRC		+= spi.c
 OBJS		:= $(addsuffix .o,$(basename $(SRC)))