DESCRIPTION = "Linux Kernel" SECTION = "kernel" LICENSE = "GPL" inherit kernel # These devices need mkimage to generate a kernel image DEPENDS_append_kb9202 = " u-boot-mkimage-openmoko-native " DEPENDS_append_at32stk1000 = " u-boot-mkimage-openmoko-native " DEPENDS_append_atngw100 = " u-boot-mkimage-openmoko-native " DEPENDS_append_at91sam9263ek = " u-boot-mkimage-openmoko-native " DEPENDS_append_at91sam9261ek = " u-boot-mkimage-openmoko-native " DEPENDS_append_at91sam9260ek = " u-boot-mkimage-openmoko-native " DEPENDS_append_sarge-at91 = " u-boot-mkimage-openmoko-native " DEPENDS_append_gumstix-connex = " u-boot-mkimage-openmoko-native " DEPENDS_append_gumstix-verdex = " u-boot-mkimage-openmoko-native " DEPENDS_append_fic-gta01 = " u-boot-mkimage-openmoko-native " DEPENDS_append_fic-gta02 = " u-boot-mkimage-openmoko-native " # Specify the commandline for your device #boot from mmc CMDLINE_at91sam9263ek = "mem=64M console=ttyS0,115200 root=/dev/mmcblk0p1 rootfstype=ext2 rootdelay=5" #boot from nfs #CMDLINE_at91sam9263ek = "mem=64M console=ttyS0,115200 root=301 root=/dev/nfs nfsroot=172.20.3.1:/data/at91 ip=172.20.0.5:::255.255.0.0" do_configure_prepend() { echo "" > ${S}/.config # # logo support, if you supply logo_linux_clut224.ppm in SRC_URI, then it's going to be used # if [ -e ${WORKDIR}/logo_linux_clut224.ppm ]; then install -m 0644 ${WORKDIR}/logo_linux_clut224.ppm drivers/video/logo/logo_linux_clut224.ppm echo "CONFIG_LOGO=y" >> ${S}/.config echo "CONFIG_LOGO_LINUX_CLUT224=y" >> ${S}/.config fi # # oabi / eabi support # if [ "${TARGET_OS}" == "linux-gnueabi" -o "${TARGET_OS}" == "linux-uclibcgnueabi" ]; then echo "CONFIG_AEABI=y" >> ${S}/.config echo "CONFIG_OABI_COMPAT=y" >> ${S}/.config else echo "# CONFIG_AEABI is not set" >> ${S}/.config echo "# CONFIG_OABI_COMPAT is not set" >> ${S}/.config fi echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config sed -e '/CONFIG_AEABI/d' \ -e '/CONFIG_OABI_COMPAT=/d' \ -e '/CONFIG_CMDLINE=/d' \ -e '/CONFIG_LOGO=/d' \ -e '/CONFIG_LOGO_LINUX_CLUT224=/d' \ < '${WORKDIR}/defconfig' >>'${S}/.config' # # root-over-nfs-over-usbgadget support. Limited, but should cover some cases. # Note that you need to have a proper CMDLINE_NFSROOT_USB set for this to work. # if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then oenote "Configuring the kernel for root-over-nfs-over-usbgadget with CMDLINE ${CMDLINE_NFSROOT_USB}" echo "CONFIG_INET=y" >> ${S}/.config echo "CONFIG_IP_PNP=y" >> ${S}/.config echo "CONFIG_USB_GADGET=y" >> ${S}/.config echo "CONFIG_USB_ETH=y" >> ${S}/.config echo "CONFIG_NFS_FS=y" >> ${S}/.config echo "CONFIG_ROOT_NFS=y" >> ${S}/.config echo "CONFIG_CMDLINE=\"${CMDLINE_NFSROOT_USB}\"" >> ${S}/.config fi yes '' | oe_runmake oldconfig } # Support checking the kernel size since some kernels need to reside in partitions # with a fixed length or there is a limit in transferring the kernel to memory do_sizecheck() { if [ ! -z "${KERNEL_IMAGE_MAXSIZE}" ]; then size=`ls -l arch/${ARCH}/boot/${KERNEL_IMAGETYPE} | awk '{ print $5}'` if [ $size -ge ${KERNEL_IMAGE_MAXSIZE} ]; then rm arch/${ARCH}/boot/${KERNEL_IMAGETYPE} die "This kernel (size=$size) is too big for your device. Please reduce the size of the kernel by making more of it modular." fi fi } do_install_prepend() { if test -e arch/${ARCH}/boot/Image ; then ln -f arch/${ARCH}/boot/Image arch/${ARCH}/boot/uImage fi if test -e arch/${ARCH}/boot/images/uImage ; then ln -f arch/${ARCH}/boot/images/uImage arch/${ARCH}/boot/uImage fi } UBOOT_ENTRYPOINT ?= "20008000" KERNEL_IMAGE_BASE_NAME = ${KERNEL_IMAGETYPE}-${PV}-${PR}-${MACHINE}-${DATETIME} do_deploy() { install -d ${DEPLOY_DIR_IMAGE} install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_BASE_NAME}.bin tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${PR}-${MACHINE}.tgz -C ${D} lib if test "x${KERNEL_IMAGETYPE}" = "xuImage" ; then if test -e arch/${ARCH}/boot/compressed/vmlinux ; then ${OBJCOPY} -O binary -R .note -R .comment -S arch/${ARCH}/boot/compressed/vmlinux linux.bin uboot-mkimage -A ${ARCH} -O linux -T kernel -C none -a ${UBOOT_ENTRYPOINT} -e ${UBOOT_ENTRYPOINT} -n "${DISTRO_NAME}/${PV}/${MACHINE}" -d linux.bin ${DEPLOY_DIR_IMAGE}/uImage-${PV}-${PR}-${MACHINE}-${DATETIME}.bin rm -f linux.bin else ${OBJCOPY} -O binary -R .note -R .comment -S vmlinux linux.bin rm -f linux.bin.gz gzip -9 linux.bin uboot-mkimage -A ${ARCH} -O linux -T kernel -C gzip -a ${UBOOT_ENTRYPOINT} -e ${UBOOT_ENTRYPOINT} -n "${DISTRO_NAME}/${PV}/${MACHINE}" -d linux.bin.gz ${DEPLOY_DIR_IMAGE}/uImage-${PV}-${PR}-${MACHINE}-${DATETIME}.bin rm -f linux.bin.gz fi fi } do_deploy[dirs] = "${S}" addtask sizecheck before do_install after do_compile addtask deploy before do_package after do_install