DESCRIPTION = "Linux Kernel" SECTION = "kernel" LICENSE = "GPL" # These devices need mkimage to generate a kernel image DEPENDS_kb9202 = "u-boot-mkimage-gta01-native" DEPENDS_at32stk1000 = "u-boot-mkimage-gta01-native" DEPENDS_atngw100 = "u-boot-mkimage-gta01-native" DEPENDS_at91sam9263ek = "u-boot-mkimage-gta01-native" DEPENDS_sarge-at91 = "u-boot-mkimage-gta01-native" inherit kernel KERNEL_IMAGETYPE_progear = "bzImage" KERNEL_IMAGETYPE_simpad = "zImage" KERNEL_IMAGETYPE_kb9202 = "uImage" KERNEL_IMAGETYPE_atngw100 = "uImage" KERNEL_IMAGETYPE_at32stk1000 = "uImage" KERNEL_IMAGETYPE_at91sam9263ek = "uImage" KERNEL_IMAGETYPE_sarge-at91 = "uImage" # Specify the commandline for you device here: #boot from mmc CMDLINE_at91sam9263ek = "mem=64M console=ttyS0,115200 root=/dev/mmcblk0p1 rootfstype=ext2 rootdelay=5" #boot from nfs #CMDLINE_at91sam9263ek = "mem=64M console=ttyS0,115200 root=301 root=/dev/nfs nfsroot=172.20.3.1:/data/at91 ip=172.20.0.5:::255.255.0.0" do_configure_prepend() { echo "" > ${S}/.config if [ "${TARGET_OS}" == "linux-gnueabi" -o "${TARGET_OS}" == "linux-uclibcgnueabi" ]; then echo "CONFIG_AEABI=y" >> ${S}/.config echo "CONFIG_OABI_COMPAT=y" >> ${S}/.config else echo "# CONFIG_AEABI is not set" >> ${S}/.config echo "# CONFIG_OABI_COMPAT is not set" >> ${S}/.config fi echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config sed -e '/CONFIG_AEABI/d' \ -e '/CONFIG_OABI_COMPAT=/d' \ -e '/CONFIG_CMDLINE=/d' \ < '${WORKDIR}/defconfig' >>'${S}/.config' yes '' | oe_runmake oldconfig } do_install_prepend() { if test -e arch/${ARCH}/boot/Image ; then ln -f arch/${ARCH}/boot/Image arch/${ARCH}/boot/uImage fi if test -e arch/${ARCH}/boot/images/uImage ; then ln -f arch/${ARCH}/boot/images/uImage arch/${ARCH}/boot/uImage fi } do_deploy() { install -d ${DEPLOY_DIR_IMAGE} install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${PR}-${MACHINE}-${DATETIME}.bin tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${PR}-${MACHINE}.tgz -C ${D} lib if test "x${KERNEL_IMAGETYPE}" = "xuImage" ; then ${OBJCOPY} -O binary -R .note -R .comment -S vmlinux linux.bin rm -f linux.bin.gz gzip -9 linux.bin uboot-mkimage -A ${ARCH} -O linux -T kernel -C gzip -a 20008000 -e 20008000 -n "${DISTRO_NAME} Kernel for ${MACHINE}" -d linux.bin.gz ${DEPLOY_DIR_IMAGE}/uImage-${PV}-${PR}-${MACHINE}-${DATETIME}.bin rm -f linux.bin.gz fi } do_deploy[dirs] = "${S}" addtask prepatch before do_patch after do_unpack addtask deploy before do_package after do_install