diff -ruN linux-2.6.18-vanilla/arch/arm/Kconfig linux-2.6.18/arch/arm/Kconfig
--- linux-2.6.18-vanilla/arch/arm/Kconfig	2006-11-20 23:12:54.000000000 +0000
+++ linux-2.6.18/arch/arm/Kconfig	2006-11-20 23:12:33.000000000 +0000
@@ -729,7 +729,7 @@
 
 config CPU_FREQ_SA1110
 	bool
-	depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3)
+	depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3 || SA1100_JORNADA720)
 	default y
 
 config CPU_FREQ_INTEGRATOR
@@ -848,6 +848,17 @@
 	  anything, try disabling/enabling this option (or disabling/enabling
 	  APM in your BIOS).
 
+config SA1100_JORNADA720_APM
+	tristate "Jornada 720 battery status reporting"
+	depends on SA1100_JORNADA720_MCU && APM
+	help
+	  Say Y here if you have a HP Jornada 7xx handheld computer and you
+	  want to be able to read battery status.
+
+	  To compile this driver as a module choose M here: the
+	  module will be called jornada720_apm.
+
+
 endmenu
 
 source "net/Kconfig"
diff -ruN linux-2.6.18-vanilla/arch/arm/configs/jornada720_defconfig linux-2.6.18/arch/arm/configs/jornada720_defconfig
--- linux-2.6.18-vanilla/arch/arm/configs/jornada720_defconfig	2006-09-20 03:42:06.000000000 +0000
+++ linux-2.6.18/arch/arm/configs/jornada720_defconfig	2006-11-20 23:12:36.000000000 +0000
@@ -1,74 +1,120 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:10:35 2005
+# Linux kernel version: 2.6.19-rc6
+# Mon Nov 20 20:39:42 2006
 #
 CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
 CONFIG_MMU=y
-CONFIG_UID16=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
 #
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
 #
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
@@ -76,9 +122,7 @@
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
+CONFIG_DMABOUNCE=y
 
 #
 # SA11x0 Implementations
@@ -91,6 +135,7 @@
 # CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 CONFIG_SA1100_JORNADA720=y
+CONFIG_SA1100_JORNADA720_MCU=y
 # CONFIG_SA1100_HACKKIT is not set
 # CONFIG_SA1100_LART is not set
 # CONFIG_SA1100_PLEB is not set
@@ -108,13 +153,15 @@
 CONFIG_CPU_CACHE_V4WB=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
 CONFIG_FORCE_MAX_ZONEORDER=9
 
 #
@@ -128,21 +175,36 @@
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+# CONFIG_PCMCIA_IOCTL is not set
 
 #
 # PC-card bridges
 #
-CONFIG_I82365=y
+# CONFIG_I82365 is not set
 # CONFIG_TCIC is not set
-CONFIG_PCMCIA_SA1100=y
-# CONFIG_PCMCIA_SA1111 is not set
-CONFIG_PCCARD_NONSTATIC=y
+# CONFIG_PCMCIA_SA1100 is not set
+CONFIG_PCMCIA_SA1111=y
 
 #
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=2
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -151,13 +213,24 @@
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd mem=32M"
+CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 
 #
 # CPU Frequency scaling
 #
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_SA1110=y
 
 #
 # Floating point emulation
@@ -168,21 +241,106 @@
 #
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_NWFPE_XP is not set
-CONFIG_FPE_FASTFPE=y
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
+# CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
-CONFIG_PM=y
-# CONFIG_APM is not set
+# CONFIG_PM is not set
+CONFIG_APM=y
+CONFIG_SA1100_JORNADA720_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -193,89 +351,18 @@
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
-# Memory Technology Devices (MTD)
+# Connector - unified userspace <-> kernelspace linker
 #
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_CONNECTOR is not set
 
 #
-# NAND Flash Device Drivers
+# Memory Technology Devices (MTD)
 #
-# CONFIG_MTD_NAND is not set
+# CONFIG_MTD is not set
 
 #
 # Parallel port support
@@ -290,40 +377,28 @@
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
+CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
@@ -331,7 +406,7 @@
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=m
+CONFIG_IDE_GENERIC=y
 # CONFIG_IDE_ARM is not set
 # CONFIG_IDE_CHIPSETS is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
@@ -341,7 +416,9 @@
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -351,6 +428,7 @@
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -361,129 +439,8 @@
 #
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-# CONFIG_IRNET is not set
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -496,6 +453,10 @@
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+
+#
 # Ethernet (10 or 100Mbit)
 #
 # CONFIG_NET_ETHERNET is not set
@@ -518,15 +479,16 @@
 # Wireless LAN (non-hamradio)
 #
 CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
 
 #
 # Obsolete Wireless cards support (pre-802.11)
 #
 # CONFIG_STRIP is not set
-CONFIG_ARLAN=m
-CONFIG_WAVELAN=m
+# CONFIG_ARLAN is not set
+# CONFIG_WAVELAN is not set
 CONFIG_PCMCIA_WAVELAN=m
-# CONFIG_PCMCIA_NETWAVE is not set
+CONFIG_PCMCIA_NETWAVE=m
 
 #
 # Wireless 802.11 Frequency Hopping cards support
@@ -537,14 +499,17 @@
 # Wireless 802.11b ISA/PCI cards support
 #
 CONFIG_HERMES=m
-# CONFIG_ATMEL is not set
+CONFIG_ATMEL=m
 
 #
 # Wireless 802.11b Pcmcia/Cardbus cards support
 #
 CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
 CONFIG_AIRO_CS=m
-# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PCMCIA_ATMEL is not set
+CONFIG_PCMCIA_WL3501=m
+# CONFIG_HOSTAP is not set
 CONFIG_NET_WIRELESS=y
 
 #
@@ -564,17 +529,12 @@
 # Wan interfaces
 #
 # CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
+# CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -585,49 +545,51 @@
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
 #
 CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=640
+CONFIG_INPUT_TSDEV_SCREEN_Y=240
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_JORNADA720=y
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_JORNADA720=y
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_SA1111 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -635,6 +597,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -651,7 +614,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_LEGACY_PTY_COUNT=8
 
 #
 # IPMI
@@ -662,20 +625,21 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -689,8 +653,44 @@
 # CONFIG_I2C is not set
 
 #
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
+# CONFIG_TIFM_CORE is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP_SA11X0 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
 
 #
 # Multimedia devices
@@ -705,14 +705,17 @@
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_SA1100 is not set
+CONFIG_FB_S1D13XXX=y
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -721,37 +724,50 @@
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
 
 #
 # Logo configuration
 #
 # CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+CONFIG_BACKLIGHT_JORNADA720=y
+CONFIG_LCD_JORNADA720=y
 
 #
 # Sound
 #
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
+# CONFIG_SOUND is not set
 
 #
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -762,53 +778,89 @@
 # CONFIG_MMC is not set
 
 #
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=m
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
+# CONFIG_ISO9660_FS is not set
 # CONFIG_UDF_FS is not set
 
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=852
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-2"
 # CONFIG_NTFS_FS is not set
 
 #
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-CONFIG_DEVFS_DEBUG=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -820,15 +872,6 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=2
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -839,21 +882,14 @@
 #
 # Network File Systems
 #
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -864,7 +900,46 @@
 #
 # Native Language Support
 #
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-2"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+CONFIG_NLS_CODEPAGE_1250=m
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
 
 #
 # Profiling support
@@ -875,23 +950,16 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
 
 #
 # Security options
@@ -902,7 +970,36 @@
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -912,7 +1009,7 @@
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -ruN linux-2.6.18-vanilla/arch/arm/mach-sa1100/Kconfig linux-2.6.18/arch/arm/mach-sa1100/Kconfig
--- linux-2.6.18-vanilla/arch/arm/mach-sa1100/Kconfig	2006-09-20 03:42:06.000000000 +0000
+++ linux-2.6.18/arch/arm/mach-sa1100/Kconfig	2006-11-20 23:11:07.000000000 +0000
@@ -101,6 +101,17 @@
 	  handheld computer.  See <http://www.hp.com/jornada/products/720>
 	  for details.
 
+config SA1100_JORNADA720_MCU
+	tristate "HP Jornada 720 Microprocessor Controller Unit"
+	depends on SA1100_JORNADA720
+	help
+	  Say Y here if you have a HP Jornada 7xx handheld computer and you
+	  want to access devices connected by the MCU. Those include the
+	  keyboard, touchscreen, backlight and battery.
+
+	  To compile this driver as a module choose M here: the
+	  module will be called jornada720_mcu.
+
 config SA1100_HACKKIT
 	bool "HackKit Core CPU Board"
 	help
diff -ruN linux-2.6.18-vanilla/arch/arm/mach-sa1100/Makefile linux-2.6.18/arch/arm/mach-sa1100/Makefile
--- linux-2.6.18-vanilla/arch/arm/mach-sa1100/Makefile	2006-09-20 03:42:06.000000000 +0000
+++ linux-2.6.18/arch/arm/mach-sa1100/Makefile	2006-11-20 23:11:23.000000000 +0000
@@ -31,6 +31,8 @@
 led-$(CONFIG_SA1100_HACKKIT)		+= leds-hackkit.o
 
 obj-$(CONFIG_SA1100_JORNADA720)		+= jornada720.o
+obj-$(CONFIG_SA1100_JORNADA720_MCU)	+= jornada720_mcu.o
+obj-$(CONFIG_SA1100_JORNADA720_APM)	+= jornada720_apm.o
 
 obj-$(CONFIG_SA1100_LART)		+= lart.o
 led-$(CONFIG_SA1100_LART)		+= leds-lart.o
diff -ruN linux-2.6.18-vanilla/arch/arm/mach-sa1100/cpu-sa1110.c linux-2.6.18/arch/arm/mach-sa1100/cpu-sa1110.c
--- linux-2.6.18-vanilla/arch/arm/mach-sa1100/cpu-sa1110.c	2006-11-20 23:12:54.000000000 +0000
+++ linux-2.6.18/arch/arm/mach-sa1100/cpu-sa1110.c	2006-11-20 23:12:31.000000000 +0000
@@ -85,7 +85,8 @@
 	}, {    /* Samsung K4S281632B-1H */
 	        .name           = "K4S281632B-1H",
 		.rows           = 12,
-		.tck            = 10,
+		.tck            = 8,
+		.trcd           = 20,
 		.trp            = 20,
 		.twr            = 10,
 		.refresh        = 64000,
@@ -142,7 +143,7 @@
 sdram_calculate_timing(struct sdram_info *sd, u_int cpu_khz,
 		       struct sdram_params *sdram)
 {
-	u_int mem_khz, sd_khz, trp, twr;
+	u_int mem_khz, sd_khz, trp, twr, rcd;
 
 	mem_khz = cpu_khz / 2;
 	sd_khz = mem_khz;
@@ -180,8 +181,14 @@
 	if (sd_khz != mem_khz)
 		sd->mdrefr |= MDREFR_K1DB2;
 
+	rcd = ns_to_cycles(sdram->trcd, mem_khz);
+
+#ifdef CONFIG_SA1100_JORNADA720
+	/* Jornada 720 memory doesn't like trcd of 1 */
+	if(rcd < 2) rcd = 2;
+#endif
 	/* initial number of '1's in MDCAS + 1 */
-	set_mdcas(sd->mdcas, sd_khz >= 62000, ns_to_cycles(sdram->trcd, mem_khz));
+	set_mdcas(sd->mdcas, sd_khz >= 62000, rcd);
 
 #ifdef DEBUG
 	printk("MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n",
diff -ruN linux-2.6.18-vanilla/arch/arm/mach-sa1100/jornada720.c linux-2.6.18/arch/arm/mach-sa1100/jornada720.c
--- linux-2.6.18-vanilla/arch/arm/mach-sa1100/jornada720.c	2006-09-20 03:42:06.000000000 +0000
+++ linux-2.6.18/arch/arm/mach-sa1100/jornada720.c	2006-11-20 23:10:41.000000000 +0000
@@ -1,5 +1,15 @@
 /*
  * linux/arch/arm/mach-sa1100/jornada720.c
+ *
+ * HP Jornada720 init code
+ *
+ * Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl>
+ *  Copyright (C) 2005 Michael Gernoth <michael@gernoth.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
  */
 
 #include <linux/init.h>
@@ -10,13 +20,14 @@
 #include <linux/ioport.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <video/s1d13xxxfb.h>
 
 #include <asm/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
-
+#include <asm/s1d13506.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
@@ -24,13 +35,56 @@
 
 #include "generic.h"
 
+/*
+ * HP Documentation referred in this file:
+ * http://www.jlime.com/downloads/development/docs/jornada7xx/jornada720.txt
+ */
+
+/* line 110 of HP's doc */
+#define TUCR_VAL	0x20000400
+
+/* memory space (line 52 of HP's doc) */
+#define SA1111REGSTART	0x40000000
+#define SA1111REGLEN	0x00001fff
+#define EPSONREGSTART	0x48000000
+#define EPSONREGLEN	0x00100000
+#define EPSONFBSTART	0x48200000
+/* 512kB framebuffer */
+#define EPSONFBLEN	512*1024
+
+static struct s1d13xxxfb_pdata s1d13xxxfb_data = {
+	.initregs		= s1d13xxxfb_initregs,
+	.initregssize		= ARRAY_SIZE(s1d13xxxfb_initregs),
+	.platform_init_video	= NULL
+};
+
+static struct resource s1d13xxxfb_resources[] = {
+	[0] = {
+		.start	= EPSONFBSTART,
+		.end	= EPSONFBSTART + EPSONFBLEN,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= EPSONREGSTART,
+		.end	= EPSONREGSTART + EPSONREGLEN,
+		.flags	= IORESOURCE_MEM,
+	}
+};
 
-#define JORTUCR_VAL	0x20000400
+static struct platform_device s1d13xxxfb_device = {
+	.name		= S1D_DEVICENAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &s1d13xxxfb_data,
+	},
+	.num_resources	= ARRAY_SIZE(s1d13xxxfb_resources),
+	.resource	= s1d13xxxfb_resources,
+};
 
 static struct resource sa1111_resources[] = {
 	[0] = {
-		.start		= 0x40000000,
-		.end		= 0x40001fff,
+		.start		= SA1111REGSTART,
+		.end		= SA1111REGSTART + SA1111REGLEN,
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -53,18 +107,32 @@
 	.resource	= sa1111_resources,
 };
 
+static struct platform_device jornada720_mcu_device = {
+	.name		= "jornada720_mcu",
+	.id		= -1,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&sa1111_device,
+	&jornada720_mcu_device,
+	&s1d13xxxfb_device,
 };
 
+/* a stub for now, we theoretically cannot suspend without a flashboard */
+int pm_suspend(suspend_state_t state)
+{
+	return -1;
+}
+
 static int __init jornada720_init(void)
 {
 	int ret = -ENODEV;
 
 	if (machine_is_jornada720()) {
 		GPDR |= GPIO_GPIO20;
-		TUCR = JORTUCR_VAL;	/* set the oscillator out to the SA-1101 */
-
+		/* oscillator setup (line 116 of HP's doc) */
+		TUCR = TUCR_VAL;
+		/* resetting SA1111 (line 118 of HP's doc) */
 		GPSR = GPIO_GPIO20;
 		udelay(1);
 		GPCR = GPIO_GPIO20;
@@ -72,10 +140,6 @@
 		GPSR = GPIO_GPIO20;
 		udelay(20);
 
-		/* LDD4 is speaker, LDD3 is microphone */
-		PPSR &= ~(PPC_LDD3 | PPC_LDD4);
-		PPDR |= PPC_LDD3 | PPC_LDD4;
-
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
 	return ret;
@@ -85,19 +149,19 @@
 
 static struct map_desc jornada720_io_desc[] __initdata = {
 	{	/* Epson registers */
-		.virtual	=  0xf0000000,
-		.pfn		= __phys_to_pfn(0x48000000),
-		.length		= 0x00100000,
+		.virtual	= 0xf0000000,
+		.pfn		= __phys_to_pfn(EPSONREGSTART),
+		.length		= EPSONREGLEN,
 		.type		= MT_DEVICE
 	}, {	/* Epson frame buffer */
-		.virtual	=  0xf1000000,
-		.pfn		= __phys_to_pfn(0x48200000),
-		.length		= 0x00100000,
+		.virtual	= 0xf1000000,
+		.pfn		= __phys_to_pfn(EPSONFBSTART),
+		.length		= EPSONFBLEN,
 		.type		= MT_DEVICE
 	}, {	/* SA-1111 */
-		.virtual	=  0xf4000000,
-		.pfn		= __phys_to_pfn(0x40000000),
-		.length		= 0x00100000,
+		.virtual	= 0xf4000000,
+		.pfn		= __phys_to_pfn(SA1111REGSTART),
+		.length		= SA1111REGLEN,
 		.type		= MT_DEVICE
 	}
 };
@@ -106,7 +170,7 @@
 {
 	sa1100_map_io();
 	iotable_init(jornada720_io_desc, ARRAY_SIZE(jornada720_io_desc));
-	
+
 	sa1100_register_uart(0, 3);
 	sa1100_register_uart(1, 1);
 }
@@ -116,7 +180,7 @@
 		.name		= "JORNADA720 boot firmware",
 		.size		= 0x00040000,
 		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
 	}, {
 		.name		= "JORNADA720 kernel",
 		.size		= 0x000c0000,
@@ -139,7 +203,7 @@
 		.offset		= 0x00540000,
 	}, {
 		.name		= "JORNADA720 usr local",
-		.size		= 0,  /* will expand to the end of the flash */
+		.size		= 0, /* will expand to the end of the flash */
 		.offset		= 0x00d00000,
 	}
 };
@@ -147,10 +211,12 @@
 static void jornada720_set_vpp(int vpp)
 {
 	if (vpp)
-		PPSR |= 0x80;
+		/* enabling flash write (line 470 of HP's doc) */
+		PPSR |= PPC_LDD7;
 	else
-		PPSR &= ~0x80;
-	PPDR |= 0x80;
+		/* disabling flash write (line 470 of HP's doc) */
+		PPSR &= ~PPC_LDD7;
+	PPDR |= PPC_LDD7;
 }
 
 static struct flash_platform_data jornada720_flash_data = {
diff -ruN linux-2.6.18-vanilla/arch/arm/mach-sa1100/jornada720_apm.c linux-2.6.18/arch/arm/mach-sa1100/jornada720_apm.c
--- linux-2.6.18-vanilla/arch/arm/mach-sa1100/jornada720_apm.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18/arch/arm/mach-sa1100/jornada720_apm.c	2006-11-20 23:11:20.000000000 +0000
@@ -0,0 +1,195 @@
+/*
+ * HP Jornada 720 APM driver
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+
+#include <asm/apm.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/jornada720_mcu.h>
+
+/*
+ * HP Documentation referred in this file:
+ * http://www.jlime.com/downloads/development/docs/jornada7xx/jornada720.txt
+ */
+
+MODULE_AUTHOR("Filip Zyzniewski <filip.zyzniewski@tefnet.pl>");
+MODULE_DESCRIPTION("Jornada 720 battery status reporting");
+MODULE_LICENSE("GPL");
+
+#define jornada720_apm_battery_charging() (! (GPLR & GPIO_GPIO26) )
+#define jornada720_apm_ac_online() ((GPLR & GPIO_GPIO4) ? 0 : 1)
+
+#define JORNADA720_APM_BACKUP_BATTERY 0
+#define JORNADA720_APM_MAIN_BATTERY 1
+
+#define JORNADA720_APM_MAIN_BATT_MIN_VOLTAGE 430
+
+/* without ac power */
+#define JORNADA720_APM_MAIN_BATT_MAX_VOLTAGE 670
+
+/* divisor to convert jornada720_apm_get_main_battery() return value into % */
+#define JORNADA720_APM_MAIN_BATT_DIVISOR \
+	(JORNADA720_APM_MAIN_BATT_MAX_VOLTAGE-JORNADA720_APM_MAIN_BATT_MIN_VOLTAGE) * \
+	(JORNADA720_APM_MAIN_BATT_MAX_VOLTAGE-JORNADA720_APM_MAIN_BATT_MIN_VOLTAGE) / 100
+/*
+ * coeffient correcting battery voltage altered by
+ * ac power
+ */
+#define JORNADA720_APM_MAIN_BATT_AC_COEFF 100 / 105
+
+
+int jornada720_apm_get_battery_raw(int battnum)
+{
+	unsigned char lsb, msb;
+
+	/* getting batteries data (line 289 of HP's doc) */
+	if (!jornada720_mcu_start(jornada720_mcu_GetBatteryData)) {
+		lsb=jornada720_mcu_read();
+		if (battnum==JORNADA720_APM_BACKUP_BATTERY)
+			/* we are interested in the second byte */
+			lsb=jornada720_mcu_read();
+		else
+			/* we are interested in the first byte */
+			jornada720_mcu_read();
+
+		msb=jornada720_mcu_read();
+	} else {
+		jornada720_mcu_end();
+		return -1;
+	}
+
+	jornada720_mcu_end();
+
+	if (battnum==JORNADA720_APM_MAIN_BATTERY) {
+		/*
+		* main battery absent
+		* (http://mail-index.netbsd.org/port-hpcarm/2005/09/18/0000.html)
+		*/
+		if ((msb & 0x03) == 0x03) return -1;
+		/* putting the value together (line 300 of HP's doc) */
+		return ((msb & 0x03) << 8) + lsb;
+	} else {
+		/*
+		* backup battery absent
+		* (http://mail-index.netbsd.org/port-hpcarm/2005/09/18/0000.html)
+		*/
+		if ((msb & 0x0c) == 0x00) return -1;
+		/* putting the value together (line 300 of HP's doc) */
+		return ((msb & 0x0c) << 6) + lsb;
+	}
+}
+
+int jornada720_apm_get_battery(int battnum)
+{
+	int ret = jornada720_apm_get_battery_raw(battnum);
+	
+	if (ret == -1)
+		return ret;
+
+	if (battnum==JORNADA720_APM_MAIN_BATTERY) {
+		/* we want 0 for a completely drained battery */
+		ret -= JORNADA720_APM_MAIN_BATT_MIN_VOLTAGE;
+
+		/* voltage(time) is not linear */
+		ret *= ret;
+
+		/* let's bring it down to 0-100% range */
+		ret /= JORNADA720_APM_MAIN_BATT_DIVISOR;
+
+		/* plugging AC power causes voltage to rise a bit */
+		if (jornada720_apm_ac_online())
+			ret = ret * JORNADA720_APM_MAIN_BATT_AC_COEFF;
+
+		/* 
+		 * sometimes it tends to fluctuate a bit above 100%, which
+		 * looks funny, so we bring it down
+		 */
+		if (ret > 100) ret=100;
+
+	}
+	
+	/* 
+	 * returning a raw value, because we don't know how to calculate %
+	 * for a backup battery 
+	 */
+	return ret;
+}
+
+static void jornada720_apm_get_power_status(struct apm_power_info *info)
+{
+
+	info->battery_life=jornada720_apm_get_battery(JORNADA720_APM_MAIN_BATTERY);
+
+	if (info->battery_life==-1) {
+		info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
+		info->battery_flag = APM_BATTERY_FLAG_NOT_PRESENT;
+
+	} else if (info->battery_life < 30) {
+		info->battery_status = APM_BATTERY_STATUS_LOW;
+		info->battery_flag = APM_BATTERY_FLAG_LOW;
+
+	} else if (info->battery_life < 5) {
+		info->battery_status = APM_BATTERY_STATUS_CRITICAL;
+		info->battery_flag = APM_BATTERY_FLAG_CRITICAL;
+
+	} else {
+		info->battery_status = APM_BATTERY_STATUS_HIGH;
+		info->battery_flag = APM_BATTERY_FLAG_HIGH;
+	}
+
+	if (jornada720_apm_battery_charging())
+		info->battery_status = APM_BATTERY_STATUS_CHARGING;
+
+	info->ac_line_status = jornada720_apm_ac_online();
+}
+
+static int jornada720_apm_probe(struct device *dev) {
+
+	/* we provide a function to check battery levels etc */
+	apm_get_power_status=jornada720_apm_get_power_status;
+
+	return 0;
+}
+
+static int jornada720_apm_remove(struct device *dev) {
+	if(apm_get_power_status==jornada720_apm_get_power_status)
+		apm_get_power_status=NULL;
+	return 0;
+}
+
+static struct device_driver jornada720_apm_driver = {
+	.name	= jornada720_mcu_bus_id_apm,
+	.bus	= &jornada720_mcu_bus_type,
+	.probe	= jornada720_apm_probe,
+	.remove	= jornada720_apm_remove, 
+	.owner	= THIS_MODULE,
+};
+
+static int __init jornada720_apm_init(void) {
+	int ret, backup_level;
+	
+	ret = driver_register(&jornada720_apm_driver);
+	if(ret) return ret;
+
+	backup_level = jornada720_apm_get_battery(JORNADA720_APM_BACKUP_BATTERY);
+	
+	if(backup_level != -1)
+		printk(KERN_INFO "jornada720_apm: backup battery level: %i\n", backup_level);
+	else
+		printk(KERN_INFO "jornada720_apm: backup battery not present\n");
+	
+	return ret;
+}
+
+static void __exit jornada720_apm_exit(void) {
+	driver_unregister(&jornada720_apm_driver);
+}
+
+
+module_init(jornada720_apm_init);
+module_exit(jornada720_apm_exit);
diff -ruN linux-2.6.18-vanilla/arch/arm/mach-sa1100/jornada720_mcu.c linux-2.6.18/arch/arm/mach-sa1100/jornada720_mcu.c
--- linux-2.6.18-vanilla/arch/arm/mach-sa1100/jornada720_mcu.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18/arch/arm/mach-sa1100/jornada720_mcu.c	2006-11-20 23:11:00.000000000 +0000
@@ -0,0 +1,248 @@
+/*
+ * arch/arm/mach-sa1100/jornada720_mcu.c
+ *
+ * HP Jornada 720 Microprocessor Control Unit driver
+ *
+ * Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl>
+ *  Copyright (C) 2005 Michael Gernoth <michael@gernoth.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/jornada720_mcu.h>
+
+/* TODO:
+ * when CONFIG_SA1100_SSP will be definable and ssp header will be present,
+ * CONFIG_SA1100_SSP should be added to this module's dependencies and this
+ * include should be removed in favour of ssp header file
+ */
+#include "ssp.c"
+
+MODULE_AUTHOR("Filip Zyzniewski <filip.zyzniewski@tefnet.pl>");
+MODULE_DESCRIPTION("HP Jornada 720 Microprocessor Controller Unit driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * HP Documentation referred in this file:
+ * http://www.jlime.com/downloads/development/docs/jornada7xx/jornada720.txt
+ */
+
+
+/* 
+ * we have to lock to avoid starting
+ * second transmission during one taking place 
+ */
+static spinlock_t jornada720_mcu_lock = SPIN_LOCK_UNLOCKED;
+static unsigned long jornada720_mcu_flags;
+
+
+u8 inline jornada720_mcu_reverse(u8 x)
+{
+	/* byte ghijklmn becomes nmlkjihg (line 205 of HP's doc) */
+	return 
+		((0x80 & x) >> 7) |
+		((0x40 & x) >> 5) |
+		((0x20 & x) >> 3) |
+		((0x10 & x) >> 1) |
+		((0x08 & x) << 1) |
+		((0x04 & x) << 3) |
+		((0x02 & x) << 5) |
+		((0x01 & x) << 7) ;
+}
+
+
+int jornada720_mcu_byte(u8 byte)
+{
+	u16 ret;
+	int timeout = 400000;
+
+	/* wating for GPIO 10 to go low (line 197 of HP's doc) */
+	while ((GPLR & GPIO_GPIO10)) {
+		if (!--timeout) {
+			printk("jornada720_mcu_byte ret -ETIMEDOUT\n");
+			return -ETIMEDOUT;
+		}
+		cpu_relax();
+	}
+
+	ret=jornada720_mcu_reverse(byte) << 8;
+
+	ssp_write_word(ret);
+	ssp_read_word(&ret);
+
+	return jornada720_mcu_reverse(ret);
+}
+
+EXPORT_SYMBOL(jornada720_mcu_byte);
+
+
+/* 
+ * WARNING: remember to jornada720_mcu_end() after every
+ * jornada720_mcu_start() or you will deadlock!
+ */
+
+int jornada720_mcu_start(u8 byte)
+{
+	int i;
+	
+	/* we don't want other access to the MCU now */
+	spin_lock_irqsave(&jornada720_mcu_lock, jornada720_mcu_flags);
+	
+	/* clear to enable MCU (line 194 of HP's doc) */
+	GPCR = GPIO_GPIO25;
+
+	/* we should always get TxDummy after first request */
+	if (jornada720_mcu_byte(byte) != jornada720_mcu_TxDummy)
+	{
+		printk(KERN_WARNING "jornada720_mcu: leftover MCU data, flushing\n");
+		for (i = 0; i < 256; i++)
+			if (jornada720_mcu_read() == -1)
+				break;
+		return -1;
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(jornada720_mcu_start);
+
+
+void jornada720_mcu_end(void)
+{
+	/* end of transmission (line 203 of HP's doc) */
+	GPSR = GPIO_GPIO25;
+	spin_unlock_irqrestore(&jornada720_mcu_lock, jornada720_mcu_flags);
+}
+
+EXPORT_SYMBOL(jornada720_mcu_end);
+
+
+/* Jornada 720 devices accessed by the MCU */
+static struct device jornada720_mcu_bus_devices[] = {
+	/* keyboard */
+	{ .bus_id = jornada720_mcu_bus_id_kbd },
+
+	/* touchscreen */
+	{ .bus_id = jornada720_mcu_bus_id_ts },
+
+	/* apm (batteries) */
+	{ .bus_id = jornada720_mcu_bus_id_apm },
+
+	/* backlight */
+	{ .bus_id = jornada720_mcu_bus_id_bl },
+
+	/* lcd display */
+	{ .bus_id = jornada720_mcu_bus_id_lcd },
+};
+
+static int jornada720_mcu_bus_match(struct device *dev, struct device_driver *drv)
+{
+	return ! strcmp(dev->bus_id, drv->name);
+}
+
+struct bus_type jornada720_mcu_bus_type = {
+	.name		= "jornada720_mcu_bus",
+	.match		= jornada720_mcu_bus_match,
+};
+
+EXPORT_SYMBOL(jornada720_mcu_bus_type);
+
+
+void jornada720_mcu_bus_device_release(struct device *dev)
+{
+	/*
+	 * those device structures are static, so we don't
+	 * have anything to free
+	 */
+}
+
+static int __init jornada720_mcu_probe(struct platform_device *dev)
+{
+	int ret, i;
+	
+	/* we don't want any data yet (line 203 of HP's doc) */
+	GPSR = GPIO_GPIO25;
+	ret=ssp_init();
+	if (ret)
+		return ret;
+	
+	/* initialization of MCU serial interface (line 182 of HP's doc) */
+	Ser4MCCR0 = 0;
+	Ser4SSCR0 = 0x0387;
+	Ser4SSCR1 = 0x18;
+
+	ssp_flush();
+
+	/* test of MCU presence */
+	ret = jornada720_mcu_start(jornada720_mcu_GetBrightness);
+	if(!ret) jornada720_mcu_read();
+	jornada720_mcu_end();
+
+	if(ret < 0) {
+		ssp_exit();
+		return -ENODEV;
+	}
+
+	/* registering devices accessible through this bus */
+	for(i=0; i<ARRAY_SIZE(jornada720_mcu_bus_devices); i++) {
+		jornada720_mcu_bus_devices[i].bus = &jornada720_mcu_bus_type;
+		jornada720_mcu_bus_devices[i].parent = &(dev->dev);
+		jornada720_mcu_bus_devices[i].release = jornada720_mcu_bus_device_release;
+		ret = device_register(jornada720_mcu_bus_devices + i);
+		if (ret)
+			break;
+	}
+
+	if (ret) {
+		for(; i <= 0; i--) {
+			device_unregister(jornada720_mcu_bus_devices + i);
+		}
+		ssp_exit();
+	}
+	
+	return ret;
+}
+
+static int jornada720_mcu_remove(struct platform_device *dev)
+{
+	int i;
+	for(i=0; i<ARRAY_SIZE(jornada720_mcu_bus_devices); i++)
+		device_unregister(jornada720_mcu_bus_devices + i);
+	/* we don't want data anymore (line 203 of HP's doc) */
+	GPSR = GPIO_GPIO25;
+	ssp_exit();
+	return 0;
+}
+
+struct platform_driver jornada720_mcu_driver = {
+	.probe = jornada720_mcu_probe,
+	.remove = jornada720_mcu_remove,
+	.driver = {
+		.name = "jornada720_mcu",
+	},
+};
+
+static int __init jornada720_mcu_init(void) {
+	int ret = bus_register(&jornada720_mcu_bus_type);
+	if (!ret)
+		return platform_driver_register(&jornada720_mcu_driver);
+	return ret;
+}
+
+static void __exit jornada720_mcu_exit(void) {
+	bus_unregister(&jornada720_mcu_bus_type);
+	platform_driver_unregister(&jornada720_mcu_driver);
+}
+
+module_init(jornada720_mcu_init);
+module_exit(jornada720_mcu_exit);
diff -ruN linux-2.6.18-vanilla/drivers/input/keyboard/Kconfig linux-2.6.18/drivers/input/keyboard/Kconfig
--- linux-2.6.18-vanilla/drivers/input/keyboard/Kconfig	2006-11-20 23:12:57.000000000 +0000
+++ linux-2.6.18/drivers/input/keyboard/Kconfig	2006-11-20 23:11:39.000000000 +0000
@@ -203,4 +203,15 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called omap-keypad.
 
+config KEYBOARD_JORNADA720
+	tristate "HP Jornada 720 Keyboard Support"
+	depends on SA1100_JORNADA720_MCU
+	default y
+	help
+	  Say Y to enable keyboard on the hewlett Packard Jornada
+	  7xx(710/720/728) series of PDAs.
+
+	  To compile this driver as a module choose M here: the
+	  module will be called jornada720_kbd.
+
 endif
diff -ruN linux-2.6.18-vanilla/drivers/input/keyboard/Makefile linux-2.6.18/drivers/input/keyboard/Makefile
--- linux-2.6.18-vanilla/drivers/input/keyboard/Makefile	2006-11-20 23:12:57.000000000 +0000
+++ linux-2.6.18/drivers/input/keyboard/Makefile	2006-11-20 23:11:36.000000000 +0000
@@ -17,4 +17,5 @@
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
 obj-$(CONFIG_KEYBOARD_OMAP)             += omap-keypad.o
+obj-$(CONFIG_KEYBOARD_JORNADA720)	+= jornada720_kbd.o
 
diff -ruN linux-2.6.18-vanilla/drivers/input/keyboard/jornada720_kbd.c linux-2.6.18/drivers/input/keyboard/jornada720_kbd.c
--- linux-2.6.18-vanilla/drivers/input/keyboard/jornada720_kbd.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18/drivers/input/keyboard/jornada720_kbd.c	2006-11-20 23:11:33.000000000 +0000
@@ -0,0 +1,159 @@
+/*
+ * drivers/input/keyboard/jornada720_kbd.c
+ *
+ * Jornada 720 keyboard interface
+ *
+ * Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl>
+ *  Copyright (C) 2004 Alex Lange <chicken@handhelds.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/jornada720_mcu.h>
+
+MODULE_AUTHOR("Alex Lange <chicken@handhelds.org>");
+MODULE_DESCRIPTION("Jornada 720 keyboard driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * HP Documentation referred in this file:
+ * http://www.jlime.com/downloads/development/docs/jornada7xx/jornada720.txt
+ */
+	
+static struct input_dev *dev;
+
+static char jornada720_kbd_name[] = "Jornada 720 keyboard";
+
+/* line 227 of HP's doc */
+static unsigned char jornada720_normal_keymap[128] = {
+	0, 1, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 87, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE,
+	0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 0, 0, 0,
+	0, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 43, 14, 0, 0, 0,
+	0, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, KEY_LEFTBRACE, KEY_RIGHTBRACE, 0, 0, 0,
+	0, 44, 45, 46, 47, 48, 49, 50, 51, 52, KEY_KPMINUS, 40, 28, 0, 0, 0,
+	0, 15, 0, 42, 0, 40, 0, 0, 0, 0, 103, 0, 54, 0, 0, 0,
+	0, 0, 0, 0, 0, 56, KEY_GRAVE, 0, 0, 105, 108, 106, 0, 0, 0, 0,
+	0, 55, 29, 0, 57, 0, 0, 0, 53, 111, 0, 0, 0, 0, 0, 116,
+};
+
+static irqreturn_t jornada720_kbd_interrupt(int irq, void *dev_id)
+{
+	int key, keycode;
+	int count, mcu_data=0;
+
+	/* start of dialogue with the MCU (line 217 of HP's doc) */
+	if(jornada720_mcu_start(jornada720_mcu_GetScanKeyCode)) {
+		printk(KERN_WARNING "jornada720_kbd: GetScanKeyCode failed\n");
+		jornada720_mcu_end();
+		return IRQ_HANDLED;
+	}
+
+	/* amount of key events (line 218 of HP's doc) */
+	count = jornada720_mcu_read();
+
+	while (count-- > 0) {
+		/* keycode (line 219 of HP's doc) */
+		key = mcu_data = jornada720_mcu_read();
+
+		if (key < 0) {
+			jornada720_mcu_end();
+			return IRQ_HANDLED;
+		}
+
+		/* scancode > 128 means key release (line 223 of HP's doc) */
+		if (key > 128)
+			key = key - 128;
+
+		keycode = jornada720_normal_keymap[key];
+
+		if (mcu_data < 128) {
+			/* key pressed (line 223 of HP's doc) */
+			input_report_key(dev, keycode, 1);
+			input_sync(dev);
+		}
+		else {
+			/* key released (line 223 of HP's doc) */
+			input_report_key(dev, keycode, 0);
+			input_sync(dev);
+		}
+	}
+	
+
+	jornada720_mcu_end();
+
+	return IRQ_HANDLED;
+}
+
+static int jornada720_kbd_probe(struct device *_dev)
+{
+	int i, ret;
+	
+	dev = input_allocate_device();
+	if (!dev)
+		return -ENOMEM;
+	
+	dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+	dev->keybit[LONG(KEY_SUSPEND)] |= BIT(KEY_SUSPEND);
+
+	for ( i=0 ; i<=128 ; i++ ) {
+		if (jornada720_normal_keymap[i])
+			set_bit(jornada720_normal_keymap[i], dev->keybit);
+	}
+
+	dev->name = jornada720_kbd_name;
+
+	/* keyboard is on GPIO0 (line 215 of HP's doc) */
+	ret = request_irq(IRQ_GPIO0,
+			jornada720_kbd_interrupt,
+			IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			jornada720_kbd_name, dev);
+	if (ret) {
+		printk(KERN_WARNING "Unable to grab IRQ for %s: %d\n", jornada720_kbd_name, ret);
+		input_free_device(dev);
+		return ret;
+	}
+
+	input_register_device(dev);
+
+	return 0;
+
+}
+
+static int jornada720_kbd_remove(struct device *_dev)
+{
+	free_irq(IRQ_GPIO0, dev);
+	input_unregister_device(dev);
+	return 0;
+}
+
+static struct device_driver jornada720_kbd_driver = {
+	.name	= jornada720_mcu_bus_id_kbd,
+	.bus	= &jornada720_mcu_bus_type,
+	.probe	= jornada720_kbd_probe,
+	.remove	= jornada720_kbd_remove,
+	.owner	= THIS_MODULE
+};
+
+static int __init jornada720_kbd_init(void)
+{
+	return driver_register(&jornada720_kbd_driver);
+}
+
+static void __exit jornada720_kbd_exit(void)
+{
+	driver_unregister(&jornada720_kbd_driver);
+}
+
+module_init(jornada720_kbd_init);
+module_exit(jornada720_kbd_exit);
diff -ruN linux-2.6.18-vanilla/drivers/input/touchscreen/Kconfig linux-2.6.18/drivers/input/touchscreen/Kconfig
--- linux-2.6.18-vanilla/drivers/input/touchscreen/Kconfig	2006-11-20 23:12:57.000000000 +0000
+++ linux-2.6.18/drivers/input/touchscreen/Kconfig	2006-11-20 23:11:53.000000000 +0000
@@ -144,4 +144,14 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called touchwin.
 
+config TOUCHSCREEN_JORNADA720
+	tristate "HP Jornada 720 touchscreen support"
+	depends on SA1100_JORNADA720_MCU
+	help
+	  Say Y here if you are using a HP Jornada 7xx (710/720/728) PDA
+	  and want to use the touchscreen.
+	  
+	  To compile this driver as a module choose M here: the
+	  module will be called jornada720_ts.
+
 endif
diff -ruN linux-2.6.18-vanilla/drivers/input/touchscreen/Makefile linux-2.6.18/drivers/input/touchscreen/Makefile
--- linux-2.6.18-vanilla/drivers/input/touchscreen/Makefile	2006-11-20 23:12:57.000000000 +0000
+++ linux-2.6.18/drivers/input/touchscreen/Makefile	2006-11-20 23:11:50.000000000 +0000
@@ -15,3 +15,4 @@
 obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
+obj-$(CONFIG_TOUCHSCREEN_JORNADA720)	+= jornada720_ts.o
diff -ruN linux-2.6.18-vanilla/drivers/input/touchscreen/jornada720_ts.c linux-2.6.18/drivers/input/touchscreen/jornada720_ts.c
--- linux-2.6.18-vanilla/drivers/input/touchscreen/jornada720_ts.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18/drivers/input/touchscreen/jornada720_ts.c	2006-11-20 23:11:48.000000000 +0000
@@ -0,0 +1,173 @@
+/*
+ * drivers/input/touchscreen/jornada720_ts.c
+ *
+ * Jornada 720 touchscreen interface
+ *
+ * Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl>
+ *  Copyright (C) 2004 Alex Lange <chicken@handhelds.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/jornada720_mcu.h>
+
+MODULE_AUTHOR("Alex Lange <chicken@handhelds.org>");
+MODULE_DESCRIPTION("Jornada 720 touchscreen driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * HP Documentation referred in this file:
+ * http://www.jlime.com/downloads/development/docs/jornada7xx/jornada720.txt
+ */
+
+static struct input_dev *dev;
+
+static char jornada720_ts_name[] = "Jornada 720 touchscreen";
+
+
+static irqreturn_t jornada720_ts_interrupt(int irq, void *dev_id)
+{
+	int X[3], Y[3], high_x, high_y, x, y;
+
+	/* check if pen is up (line 264 of HP's doc) */
+	if(GPLR & GPIO_GPIO(9)) {
+		/* report pen up */
+		input_report_key(dev, BTN_TOUCH, 0);
+		input_report_abs(dev, ABS_PRESSURE, 0);
+		input_sync(dev);
+
+		return IRQ_HANDLED;
+	}
+
+	/* 
+	 * read x & y data from mcu interface and
+	 * pass it on (line 265 of HP's doc)
+	 */
+	if(jornada720_mcu_start(jornada720_mcu_GetTouchSamples)) {
+		jornada720_mcu_end();
+		return IRQ_HANDLED;
+	}
+
+	/* 
+	 * beware: HP's doc specifies incorrect order of sample
+	 * bytes, MSBs for X and Y are the last two ones.
+	 */
+
+	/* LSBs for X (line 272 of HP's doc */
+	X[0] = jornada720_mcu_read();
+	X[1] = jornada720_mcu_read();
+	X[2] = jornada720_mcu_read();
+	
+	/* LSBs for Y (line 276 of HP's doc */
+	Y[0] = jornada720_mcu_read();
+	Y[1] = jornada720_mcu_read();
+	Y[2] = jornada720_mcu_read();
+	
+	/* MSBs for X (line 275 of HP's doc */
+	high_x = jornada720_mcu_read();
+
+	/* MSBs for Y (line 279 of HP's doc) */
+	high_y = jornada720_mcu_read();
+
+	jornada720_mcu_end();
+
+	/* calculating actual values (line 281 of HP's doc) */
+	X[0] |= (high_x & 3) << 8;
+	X[1] |= (high_x & 0xc) << 6;
+	X[2] |= (high_x & 0x30) << 4;
+
+	Y[0] |= (high_y & 3) << 8;
+	Y[1] |= (high_y & 0xc) << 6;
+	Y[2] |= (high_y & 0x30) << 4;
+
+	/* simple averaging filter */
+	x = (X[0] + X[1] + X[2])/3;
+	y = (Y[0] + Y[1] + Y[2])/3;
+
+	/* report pen down */
+	input_report_key(dev, BTN_TOUCH, 1);
+	input_report_abs(dev, ABS_X, x);
+	input_report_abs(dev, ABS_Y, y);
+	input_report_abs(dev, ABS_PRESSURE, 1);
+	input_sync(dev);
+
+	return IRQ_HANDLED;
+
+}
+
+
+static int jornada720_ts_probe(struct device *_dev)
+{
+	int ret;
+
+	dev = input_allocate_device();
+	if (!dev)
+		return -ENOMEM;
+
+	dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+	dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
+	dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+
+	dev->absmin[ABS_X] = 270; dev->absmin[ABS_Y] = 180;
+	dev->absmax[ABS_X] = 3900; dev->absmax[ABS_Y] = 3700;
+
+	dev->name = jornada720_ts_name;
+
+	/*
+	 * touchscreen is on GPIO9 (Line 263 of HP's doc. It says we should
+	 * care for falling edge, but in fact we need a rising edge.)
+	 */
+	ret = request_irq(IRQ_GPIO9,
+			jornada720_ts_interrupt,
+			IRQF_DISABLED | IRQF_TRIGGER_RISING,
+			jornada720_ts_name, dev);
+	if (ret) {
+		printk("Unable to grab IRQ for %s: %d\n", jornada720_ts_name, ret);
+		input_free_device(dev);
+		return ret;
+	}
+
+	input_register_device(dev);
+
+	return 0;
+}
+
+
+static int jornada720_ts_remove(struct device *_dev)
+{
+	free_irq(IRQ_GPIO9, dev);
+	input_unregister_device(dev);
+	return 0;
+}
+
+static struct device_driver jornada720_ts_driver = {
+	.name	= jornada720_mcu_bus_id_ts,
+	.bus	= &jornada720_mcu_bus_type,
+	.probe	= jornada720_ts_probe,
+	.remove	= jornada720_ts_remove,
+	.owner	= THIS_MODULE
+};
+
+static int __init jornada720_ts_init(void)
+{
+	return driver_register(&jornada720_ts_driver);
+}
+
+static void __exit jornada720_ts_exit(void)
+{
+	driver_unregister(&jornada720_ts_driver);
+}
+
+module_init(jornada720_ts_init);
+module_exit(jornada720_ts_exit);
diff -ruN linux-2.6.18-vanilla/drivers/video/backlight/Kconfig linux-2.6.18/drivers/video/backlight/Kconfig
--- linux-2.6.18-vanilla/drivers/video/backlight/Kconfig	2006-09-20 03:42:06.000000000 +0000
+++ linux-2.6.18/drivers/video/backlight/Kconfig	2006-11-20 23:12:17.000000000 +0000
@@ -66,3 +66,24 @@
 	  If you have a HP Jornada 680, say y to enable the
 	  backlight driver.
 
+config BACKLIGHT_JORNADA720
+	tristate "HP Jornada 720 Backlight Driver"
+	depends on BACKLIGHT_DEVICE && SA1100_JORNADA720_MCU
+	default y
+	help
+	  If you have a HP Jornada 7xx, say y to enable the
+	  backlight driver.
+	  
+	  To compile this driver as a module, choose M here: the
+	  module will be called jornada720_bl.
+
+config LCD_JORNADA720
+	tristate "HP Jornada 720 LCD control"
+	depends on LCD_DEVICE && SA1100_JORNADA720_MCU
+	default y
+	help
+	  If you have a HP Jornada 7xx, say y to be able to
+	  set contrast and power state of the LCD.
+	  
+	  To compile this driver as a module, choose M here: the
+	  module will be called jornada720_lcd.
diff -ruN linux-2.6.18-vanilla/drivers/video/backlight/Makefile linux-2.6.18/drivers/video/backlight/Makefile
--- linux-2.6.18-vanilla/drivers/video/backlight/Makefile	2006-09-20 03:42:06.000000000 +0000
+++ linux-2.6.18/drivers/video/backlight/Makefile	2006-11-20 23:12:15.000000000 +0000
@@ -5,3 +5,5 @@
 obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
 obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
 obj-$(CONFIG_BACKLIGHT_LOCOMO)	+= locomolcd.o
+obj-$(CONFIG_BACKLIGHT_JORNADA720)	+= jornada720_bl.o
+obj-$(CONFIG_LCD_JORNADA720)	+= jornada720_lcd.o
diff -ruN linux-2.6.18-vanilla/drivers/video/backlight/jornada720_bl.c linux-2.6.18/drivers/video/backlight/jornada720_bl.c
--- linux-2.6.18-vanilla/drivers/video/backlight/jornada720_bl.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18/drivers/video/backlight/jornada720_bl.c	2006-11-20 23:12:01.000000000 +0000
@@ -0,0 +1,145 @@
+/*
+ * drivers/video/backlight/jornada720_bl.c
+ *
+ * Backlight Driver for HP Jornada 720
+ *
+ * Copyright (c) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/device.h>
+#include <asm/hardware.h>
+#include <asm/arch/jornada720_mcu.h>
+#include <video/s1d13xxxfb.h>
+
+MODULE_AUTHOR("Filip Zyzniewski <filip.zyzniewski@tefnet.pl>");
+MODULE_DESCRIPTION("HP Jornada 720 Backlight Driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * HP Documentation referred in this file:
+ * http://www.jlime.com/downloads/development/docs/jornada7xx/jornada720.txt
+ */
+
+#define JORNADA720_BL_MAX_BRIGHTNESS 0xff
+
+/* default brightness (line 460 of HP's doc - it's
+ * mistakenly referred as default contrast there) */
+#define JORNADA720_BL_DEFAULT_BRIGHTNESS 0x19
+
+static struct backlight_device *jornada720_bl_device;
+
+static int jornada720_bl_get_brightness(struct backlight_device *dev)
+{
+	int ret;
+
+	/* check if backlight is on (line 461 of HP's doc */
+	if(!(PPSR & PPC_LDD1))
+		return 255;
+
+	/* get data from the MCU (line 310 of HP's doc) */
+	if(jornada720_mcu_start(jornada720_mcu_GetBrightness)) {
+		printk(KERN_WARNING "jornada720_bl: GetBrightness failed\n");
+		ret=256;
+	} else
+		ret=jornada720_mcu_read();
+
+	jornada720_mcu_end();
+
+	/* 0 is max brightness for the kernel, opposite for the MCU */
+	return 255-ret;
+}
+
+static int jornada720_bl_update_status(struct backlight_device *dev)
+{
+	int ret=0;
+
+
+	if (dev->props->power != FB_BLANK_UNBLANK || dev->props->fb_blank != FB_BLANK_UNBLANK) {
+		/* turn off the backlight PWM (line 313 of HP's doc) */
+		ret=jornada720_mcu_start(jornada720_mcu_BrightnessOff);
+		if(ret)
+			printk(KERN_WARNING "jornada720_bl: BrightnessOff failed\n");
+		/* turn off the backlight (line 461 of HP's doc) */
+		PPSR &= ~PPC_LDD1;
+		PPDR |= PPC_LDD1;
+	}
+	else {
+		/* turn the backlight on (line 461 of HP's doc) */
+		PPSR |= PPC_LDD1;
+		/* line 309 of HP's doc */
+		if (!(ret=jornada720_mcu_start(jornada720_mcu_SetBrightness))) {
+			/* 0 is max brightness for the kernel, opposite for the MCU */
+			if(jornada720_mcu_byte(255 - dev->props->brightness) != jornada720_mcu_TxDummy)
+				ret = -1;
+		} else
+			printk(KERN_WARNING "jornada720_bl: SetBrightness failed\n");
+	}
+
+	jornada720_mcu_end();
+
+	return ret;
+}
+
+
+static struct backlight_properties jornada720_bl_data = {
+	.owner		= THIS_MODULE,
+	.max_brightness = JORNADA720_BL_MAX_BRIGHTNESS,
+	.get_brightness = jornada720_bl_get_brightness,
+	.update_status	= jornada720_bl_update_status,
+};
+
+static int jornada720_bl_probe(struct device *_dev)
+{
+	/* 
+	 * name must match fb driver name (documentation of
+	 * backlight_device_register() in backlight.c
+	 */
+	jornada720_bl_device = backlight_device_register (S1D_DEVICENAME,
+		NULL, &jornada720_bl_data);
+	if (IS_ERR (jornada720_bl_device))
+		return PTR_ERR (jornada720_bl_device);
+
+	jornada720_bl_data.power = FB_BLANK_UNBLANK;
+	jornada720_bl_data.brightness = JORNADA720_BL_DEFAULT_BRIGHTNESS;
+	jornada720_bl_update_status(jornada720_bl_device);
+
+	return 0;
+	
+}
+
+static int jornada720_bl_remove(struct device *_dev)
+{
+	backlight_device_unregister(jornada720_bl_device);
+	return 0;
+}
+
+static struct device_driver jornada720_bl_driver = {
+	.name	= jornada720_mcu_bus_id_bl,
+	.bus	= &jornada720_mcu_bus_type,
+	.probe	= jornada720_bl_probe,
+	.remove = jornada720_bl_remove,
+	.owner	= THIS_MODULE
+};
+
+static int __init jornada720_bl_init(void)
+{
+	return driver_register(&jornada720_bl_driver);
+}
+
+static void __exit jornada720_bl_exit(void)
+{
+	driver_unregister(&jornada720_bl_driver);
+}
+
+module_init(jornada720_bl_init);
+module_exit(jornada720_bl_exit);
diff -ruN linux-2.6.18-vanilla/drivers/video/backlight/jornada720_lcd.c linux-2.6.18/drivers/video/backlight/jornada720_lcd.c
--- linux-2.6.18-vanilla/drivers/video/backlight/jornada720_lcd.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18/drivers/video/backlight/jornada720_lcd.c	2006-11-20 23:12:12.000000000 +0000
@@ -0,0 +1,152 @@
+/*
+ * drivers/video/backlight/jornada720_lcd.c
+ *
+ * LCD display driver for HP Jornada 720
+ *
+ * Copyright (c) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/lcd.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <asm/hardware.h>
+#include <asm/arch/jornada720_mcu.h>
+#include <video/s1d13xxxfb.h>
+
+MODULE_AUTHOR("Filip Zyzniewski <filip.zyzniewski@tefnet.pl>");
+MODULE_DESCRIPTION("HP Jornada 720 LCD control");
+MODULE_LICENSE("GPL");
+
+/*
+ * HP Documentation referred in this file:
+ * http://www.jlime.com/downloads/development/docs/jornada7xx/jornada720.txt
+ */
+
+#define JORNADA720_LCD_MAX_CONTRAST 0xff
+
+/* default contrast (line 457 of HP's doc, but it looks bad with that one) */
+#define JORNADA720_LCD_DEFAULT_CONTRAST 0x80
+
+static struct lcd_device *jornada720_lcd_device;
+
+static int jornada720_lcd_set_contrast(struct lcd_device *dev, int contrast)
+{
+	int ret=0;
+	
+	/* line 312 of HP's doc */
+	if ( !(ret=jornada720_mcu_start(jornada720_mcu_SetContrast)) ) {
+		if(jornada720_mcu_byte(contrast) != jornada720_mcu_TxDummy)
+			ret = -1;
+	} else
+		printk(KERN_WARNING "jornada720_lcd: SetContrast failed\n");
+
+	jornada720_mcu_end();
+
+	return ret;
+}
+
+static int jornada720_lcd_get_power(struct lcd_device *dev) {
+	/* LDD2 in PPC is responsible for LCD power (line 458 of HP's doc */
+	if(PPSR & PPC_LDD2)
+		return FB_BLANK_UNBLANK;
+	else
+		return FB_BLANK_POWERDOWN;
+}
+
+static int jornada720_lcd_set_power(struct lcd_device *dev, int power) {
+	if (power != FB_BLANK_UNBLANK) {
+		/* turn off the LCD (line 458 of HP's doc) */
+		PPSR &= ~PPC_LDD2;
+		PPDR |= PPC_LDD2;
+	} else 
+		/* turn on the LCD (line 458 of HP's doc) */
+		PPSR |= PPC_LDD2;
+	return 0;
+}
+
+static int jornada720_lcd_get_contrast(struct lcd_device *dev)
+{
+	int ret;
+
+	/* check if LCD is on (line 458 of HP's doc */
+	if(jornada720_lcd_get_power(dev) != FB_BLANK_UNBLANK)
+		return 0;
+
+	/* get the data from MCU (line 312 of HP's doc) */
+	if(jornada720_mcu_start(jornada720_mcu_GetContrast)) {
+		printk(KERN_WARNING "jornada720_lcd: GetContrast failed\n");
+		ret=256;
+	} else
+		ret=jornada720_mcu_read();
+
+	jornada720_mcu_end();
+
+	return ret;
+}
+
+static struct lcd_properties jornada720_lcd_data = {
+	.owner = THIS_MODULE,
+	.max_contrast = JORNADA720_LCD_MAX_CONTRAST,
+	.get_contrast = jornada720_lcd_get_contrast,
+	.set_contrast = jornada720_lcd_set_contrast,
+	.get_power = jornada720_lcd_get_power,
+	.set_power = jornada720_lcd_set_power,
+};
+
+static int jornada720_lcd_probe(struct device *_dev)
+{
+	/* 
+	 * name must match fb driver name (documentation of
+	 * lcd_device_register() in lcd.c
+	 */
+	jornada720_lcd_device = lcd_device_register (S1D_DEVICENAME,
+		NULL, &jornada720_lcd_data);
+	if (IS_ERR (jornada720_lcd_device))
+		return PTR_ERR (jornada720_lcd_device);
+
+	/* line 457 of HP's doc */
+	jornada720_lcd_set_contrast(jornada720_lcd_device, JORNADA720_LCD_DEFAULT_CONTRAST);
+	/* line 458 of HP's doc */
+	jornada720_lcd_set_power(jornada720_lcd_device, FB_BLANK_UNBLANK);
+	/* line 459 of HP's doc */
+	msleep(100);
+
+	return 0;
+	
+}
+
+static int jornada720_lcd_remove(struct device *_dev)
+{
+	lcd_device_unregister(jornada720_lcd_device);
+	return 0;
+}
+
+static struct device_driver jornada720_lcd_driver = {
+	.name	= jornada720_mcu_bus_id_lcd,
+	.bus	= &jornada720_mcu_bus_type,
+	.probe	= jornada720_lcd_probe,
+	.remove	= jornada720_lcd_remove,
+	.owner	= THIS_MODULE
+};
+
+static int __init jornada720_lcd_init(void)
+{
+	return driver_register(&jornada720_lcd_driver);
+}
+
+static void __exit jornada720_lcd_exit(void)
+{
+	driver_unregister(&jornada720_lcd_driver);
+}
+
+module_init(jornada720_lcd_init);
+module_exit(jornada720_lcd_exit);
diff -ruN linux-2.6.18-vanilla/drivers/video/s1d13xxxfb.c linux-2.6.18/drivers/video/s1d13xxxfb.c
--- linux-2.6.18-vanilla/drivers/video/s1d13xxxfb.c	2006-09-20 03:42:06.000000000 +0000
+++ linux-2.6.18/drivers/video/s1d13xxxfb.c	2006-11-20 23:10:47.000000000 +0000
@@ -540,7 +540,7 @@
 	int ret = 0;
 	u8 revision;
 
-	dbg("probe called: device is %p\n", dev);
+	dbg("probe called: device is %p\n", pdev);
 
 	printk(KERN_INFO "Epson S1D13XXX FB Driver\n");
 
diff -ruN linux-2.6.18-vanilla/include/asm-arm/arch-sa1100/jornada720.h linux-2.6.18/include/asm-arm/arch-sa1100/jornada720.h
--- linux-2.6.18-vanilla/include/asm-arm/arch-sa1100/jornada720.h	2006-11-20 23:13:04.000000000 +0000
+++ linux-2.6.18/include/asm-arm/arch-sa1100/jornada720.h	1970-01-01 00:00:00.000000000 +0000
@@ -1,42 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/jornada720.h
- *
- * Created 2000/11/29 by John Ankcorn <jca@lcs.mit.edu>
- *
- * This file contains the hardware specific definitions for HP Jornada 720
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "include <asm/hardware.h> instead"
-#endif
-
-#define SA1111_BASE             (0x40000000)
-
-#define GPIO_JORNADA720_KEYBOARD	GPIO_GPIO(0)
-#define GPIO_JORNADA720_MOUSE		GPIO_GPIO(9)
-
-#define GPIO_JORNADA720_KEYBOARD_IRQ	IRQ_GPIO0
-#define GPIO_JORNADA720_MOUSE_IRQ		IRQ_GPIO9
-
-/* MCU COMMANDS */
-#define MCU_GetBatteryData  0xc0
-#define MCU_GetScanKeyCode  0x90
-#define MCU_GetTouchSamples 0xa0
-#define MCU_GetContrast     0xD0
-#define MCU_SetContrast     0xD1
-#define MCU_GetBrightness   0xD2
-#define MCU_SetBrightness   0xD3
-#define MCU_ContrastOff     0xD8
-#define MCU_BrightnessOff   0xD9
-#define MCU_PWMOFF          0xDF
-#define MCU_TxDummy         0x11
-#define MCU_ErrorCode       0x00
-
-#ifndef __ASSEMBLY__
-
-void jornada720_mcu_init(void);
-void jornada_contrast(int arg_contrast);
-void jornada720_battery(void);
-int jornada720_getkey(unsigned char *data, int size);
-#endif
diff -ruN linux-2.6.18-vanilla/include/asm-arm/arch-sa1100/jornada720_mcu.h linux-2.6.18/include/asm-arm/arch-sa1100/jornada720_mcu.h
--- linux-2.6.18-vanilla/include/asm-arm/arch-sa1100/jornada720_mcu.h	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18/include/asm-arm/arch-sa1100/jornada720_mcu.h	2006-11-20 23:10:57.000000000 +0000
@@ -0,0 +1,48 @@
+/*
+ * include/asm-arm/arch-sa1100/jornada720_mcu.h
+ *
+ * This file contains MCU communication API defintions for HP Jornada 720
+ *
+ * Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl>
+ *  Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/* Jornada 720 Microprocessor Control Unit commands */
+#define jornada720_mcu_GetBatteryData	0xc0
+#define jornada720_mcu_GetScanKeyCode	0x90
+#define jornada720_mcu_GetTouchSamples	0xa0
+#define jornada720_mcu_GetContrast	0xD0
+#define jornada720_mcu_SetContrast	0xD1
+#define jornada720_mcu_GetBrightness	0xD2
+#define jornada720_mcu_SetBrightness	0xD3
+#define jornada720_mcu_ContrastOff	0xD8
+#define jornada720_mcu_BrightnessOff	0xD9
+#define jornada720_mcu_PWMOFF		0xDF
+#define jornada720_mcu_TxDummy		0x11
+#define jornada720_mcu_ErrorCode	0x00
+
+/* devices accessible through the MCU */
+#define jornada720_mcu_bus_id_kbd	"jornada720_kbd"
+#define jornada720_mcu_bus_id_ts	"jornada720_ts"
+#define jornada720_mcu_bus_id_apm	"jornada720_apm"
+#define jornada720_mcu_bus_id_lcd	"jornada720_lcd"
+#define jornada720_mcu_bus_id_bl	"jornada720_bl"
+
+int jornada720_mcu_byte(u8 byte);
+
+#define jornada720_mcu_read() jornada720_mcu_byte(jornada720_mcu_TxDummy)
+
+/* 
+ * WARNING: remember to jornada720_mcu_end() after every
+ * jornada720_mcu_start() or you will deadlock!
+ */
+int jornada720_mcu_start(u8 byte);
+
+void jornada720_mcu_end(void);
+
+extern struct bus_type jornada720_mcu_bus_type;
diff -ruN linux-2.6.18-vanilla/include/asm-arm/s1d13506.h linux-2.6.18/include/asm-arm/s1d13506.h
--- linux-2.6.18-vanilla/include/asm-arm/s1d13506.h	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18/include/asm-arm/s1d13506.h	2006-11-20 23:10:50.000000000 +0000
@@ -0,0 +1,135 @@
+/*
+ * include/asm-arm/s1d13506.h
+ *
+ * Epson S1D13xxx chip register init for ARM machines
+ * 
+ * Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * HP Documentation referred in this file:
+ * http://www.jlime.com/downloads/development/docs/jornada7xx/jornada720.txt
+ */
+
+static struct s1d13xxxfb_regval s1d13xxxfb_initregs[] = {
+	/* line 344 of HP's doc */
+	{0x0001,0x00},	// Miscellaneous Register
+	{0x01FC,0x00},	// Display Mode Register
+#if defined(CONFIG_SA1100_JORNADA720)
+	{0x0004,0x00},	// General IO Pins Configuration Register 0
+	{0x0005,0x00},	// General IO Pins Configuration Register 1
+	{0x0008,0x00},	// General IO Pins Control Register 0
+	{0x0009,0x00},	// General IO Pins Control Register 1
+	{0x0010,0x01},	// Memory Clock Configuration Register
+	{0x0014,0x11},	// LCD Pixel Clock Configuration Register
+	{0x0018,0x01},	// CRT/TV Pixel Clock Configuration Register
+	{0x001C,0x01},	// MediaPlug Clock Configuration Register
+	{0x001E,0x01},	// CPU To Memory Wait State Select Register
+	{0x0020,0x00},	// Memory Configuration Register
+	{0x0021,0x45},	// DRAM Refresh Rate Register
+	{0x002A,0x01},	// DRAM Timings Control Register 0
+	{0x002B,0x03},	// DRAM Timings Control Register 1
+	{0x0030,0x1c},	// Panel Type Register
+	{0x0031,0x00},	// MOD Rate Register
+	{0x0032,0x4F},	// LCD Horizontal Display Width Register
+	{0x0034,0x07},	// LCD Horizontal Non-Display Period Register
+	{0x0035,0x01},	// TFT FPLINE Start Position Register
+	{0x0036,0x0B},	// TFT FPLINE Pulse Width Register
+	{0x0038,0xEF},	// LCD Vertical Display Height Register 0
+	{0x0039,0x00},	// LCD Vertical Display Height Register 1
+	{0x003A,0x13},	// LCD Vertical Non-Display Period Register
+	{0x003B,0x0B},	// TFT FPFRAME Start Position Register
+	{0x003C,0x01},	// TFT FPFRAME Pulse Width Register
+	{0x0040,0x05},	// LCD Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
+	{0x0041,0x00},	// LCD Miscellaneous Register
+	{0x0042,0x00},	// LCD Display Start Address Register 0
+	{0x0043,0x00},	// LCD Display Start Address Register 1
+	{0x0044,0x00},	// LCD Display Start Address Register 2
+	{0x0046,0x80},	// LCD Memory Address Offset Register 0
+	{0x0047,0x02},	// LCD Memory Address Offset Register 1
+	{0x0048,0x00},	// LCD Pixel Panning Register
+	{0x004A,0x00},	// LCD Display FIFO High Threshold Control Register
+	{0x004B,0x00},	// LCD Display FIFO Low Threshold Control Register
+	{0x0050,0x4F},	// CRT/TV Horizontal Display Width Register
+	{0x0052,0x13},	// CRT/TV Horizontal Non-Display Period Register
+	{0x0053,0x01},	// CRT/TV HRTC Start Position Register
+	{0x0054,0x0B},	// CRT/TV HRTC Pulse Width Register
+	{0x0056,0xDF},	// CRT/TV Vertical Display Height Register 0
+	{0x0057,0x01},	// CRT/TV Vertical Display Height Register 1
+	{0x0058,0x2B},	// CRT/TV Vertical Non-Display Period Register
+	{0x0059,0x09},	// CRT/TV VRTC Start Position Register
+	{0x005A,0x01},	// CRT/TV VRTC Pulse Width Register
+	{0x005B,0x10},	// TV Output Control Register
+	{0x0060,0x03},	// CRT/TV Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
+	{0x0062,0x00},	// CRT/TV Display Start Address Register 0
+	{0x0063,0x00},	// CRT/TV Display Start Address Register 1
+	{0x0064,0x00},	// CRT/TV Display Start Address Register 2
+	{0x0066,0x40},	// CRT/TV Memory Address Offset Register 0
+	{0x0067,0x01},	// CRT/TV Memory Address Offset Register 1
+	{0x0068,0x00},	// CRT/TV Pixel Panning Register
+	{0x006A,0x00},	// CRT/TV Display FIFO High Threshold Control Register
+	{0x006B,0x00},	// CRT/TV Display FIFO Low Threshold Control Register
+	{0x0070,0x00},	// LCD Ink/Cursor Control Register
+	{0x0071,0x01},	// LCD Ink/Cursor Start Address Register
+	{0x0072,0x00},	// LCD Cursor X Position Register 0
+	{0x0073,0x00},	// LCD Cursor X Position Register 1
+	{0x0074,0x00},	// LCD Cursor Y Position Register 0
+	{0x0075,0x00},	// LCD Cursor Y Position Register 1
+	{0x0076,0x00},	// LCD Ink/Cursor Blue Color 0 Register
+	{0x0077,0x00},	// LCD Ink/Cursor Green Color 0 Register
+	{0x0078,0x00},	// LCD Ink/Cursor Red Color 0 Register
+	{0x007A,0x1F},	// LCD Ink/Cursor Blue Color 1 Register
+	{0x007B,0x3F},	// LCD Ink/Cursor Green Color 1 Register
+	{0x007C,0x1F},	// LCD Ink/Cursor Red Color 1 Register
+	{0x007E,0x00},	// LCD Ink/Cursor FIFO Threshold Register
+	{0x0080,0x00},	// CRT/TV Ink/Cursor Control Register
+	{0x0081,0x01},	// CRT/TV Ink/Cursor Start Address Register
+	{0x0082,0x00},	// CRT/TV Cursor X Position Register 0
+	{0x0083,0x00},	// CRT/TV Cursor X Position Register 1
+	{0x0084,0x00},	// CRT/TV Cursor Y Position Register 0
+	{0x0085,0x00},	// CRT/TV Cursor Y Position Register 1
+	{0x0086,0x00},	// CRT/TV Ink/Cursor Blue Color 0 Register
+	{0x0087,0x00},	// CRT/TV Ink/Cursor Green Color 0 Register
+	{0x0088,0x00},	// CRT/TV Ink/Cursor Red Color 0 Register
+	{0x008A,0x1F},	// CRT/TV Ink/Cursor Blue Color 1 Register
+	{0x008B,0x3F},	// CRT/TV Ink/Cursor Green Color 1 Register
+	{0x008C,0x1F},	// CRT/TV Ink/Cursor Red Color 1 Register
+	{0x008E,0x00},	// CRT/TV Ink/Cursor FIFO Threshold Register
+	{0x0100,0x00},	// BitBlt Control Register 0
+	{0x0101,0x00},	// BitBlt Control Register 1
+	{0x0102,0x00},	// BitBlt ROP Code/Color Expansion Register
+	{0x0103,0x00},	// BitBlt Operation Register
+	{0x0104,0x00},	// BitBlt Source Start Address Register 0
+	{0x0105,0x00},	// BitBlt Source Start Address Register 1
+	{0x0106,0x00},	// BitBlt Source Start Address Register 2
+	{0x0108,0x00},	// BitBlt Destination Start Address Register 0
+	{0x0109,0x00},	// BitBlt Destination Start Address Register 1
+	{0x010A,0x00},	// BitBlt Destination Start Address Register 2
+	{0x010C,0x00},	// BitBlt Memory Address Offset Register 0
+	{0x010D,0x00},	// BitBlt Memory Address Offset Register 1
+	{0x0110,0x00},	// BitBlt Width Register 0
+	{0x0111,0x00},	// BitBlt Width Register 1
+	{0x0112,0x00},	// BitBlt Height Register 0
+	{0x0113,0x00},	// BitBlt Height Register 1
+	{0x0114,0x00},	// BitBlt Background Color Register 0
+	{0x0115,0x00},	// BitBlt Background Color Register 1
+	{0x0118,0x00},	// BitBlt Foreground Color Register 0
+	{0x0119,0x00},	// BitBlt Foreground Color Register 1
+	{0x01E0,0x00},	// Look-Up Table Mode Register
+	{0x01E2,0x00},	// Look-Up Table Address Register
+	/* not sure, wouldn't like to mess with the driver */
+	{0x01E4,0x00},	// Look-Up Table Data Register
+	/* jornada doc says 0x00, but I trust the driver */
+	{0x01F0,0x10},	// Power Save Configuration Register
+	{0x01F1,0x00},	// Power Save Status Register
+	{0x01F4,0x00},	// CPU-to-Memory Access Watchdog Timer Register
+	{0x01FC,0x01},	// Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT)
+#elif 1
+#error "define a register set for your machine"
+#endif
+};
diff -ruN linux-2.6.18-vanilla/include/video/s1d13xxxfb.h linux-2.6.18/include/video/s1d13xxxfb.h
--- linux-2.6.18-vanilla/include/video/s1d13xxxfb.h	2006-11-20 23:13:06.000000000 +0000
+++ linux-2.6.18/include/video/s1d13xxxfb.h	2006-11-20 23:10:38.000000000 +0000
@@ -14,7 +14,13 @@
 #define	S1D13XXXFB_H
 
 #define S1D_PALETTE_SIZE		256
+
+#if defined(CONFIG_SA1100_JORNADA720)
+#define S1D_CHIP_REV			4	/* expected chip revision number for s1d13506 */
+#else
 #define S1D_CHIP_REV			7	/* expected chip revision number for s1d13806 */
+#endif
+
 #define S1D_FBID			"S1D13806"
 #define S1D_DEVICENAME			"s1d13806fb"