SECTION = "kernel"
DESCRIPTION = "handhelds.org Linux kernel 2.6 for PocketPCs and other consumer handheld devices."
LICENSE = "GPL"

COMPATIBLE_HOST = "arm.*-linux"
COMPATIBLE_MACHINE ?= '(asus620|asus730|aximx50|aximx50v|h1910|h2200|h3600|h3800|h3900|h4000|h5000|htcalpine|htcapache|htcblueangel|htchermes|htchimalaya|htcsable|htcuniversal|htcwallaby|hx4700|ghi270|looxc550|jornada56x|magician|rx1950|rx3000)'

# SRC_URI *must* be overriden in includer, but this is a good reference
SRC_URI ?= "${HANDHELDS_CVS};module=linux/kernel26;tag=${@'K' + bb.data.getVar('PV',d,1).replace('.', '-')} \
           file://24-hostap_cs_id.diff;patch=1 \
           file://hrw-pcmcia-ids-r2.patch;patch=1 \
	   file://defconfig"

S = "${WORKDIR}/kernel26"

inherit kernel


K_MAJOR ?= "${@bb.data.getVar('PV',d,1).split('-')[0].split('.')[0]}"
K_MINOR ?= "${@bb.data.getVar('PV',d,1).split('-')[0].split('.')[1]}"
K_MICRO ?= "${@bb.data.getVar('PV',d,1).split('-')[0].split('.')[2]}"
HHV     ?= "${@bb.data.getVar('PV',d,1).split('-')[1].split('hh')[-1]}"

KERNEL_PRIORITY = "${@'%d' % (int(bb.data.getVar('K_MAJOR',d,1)) * 100000000 + int(bb.data.getVar('K_MINOR',d,1)) * 1000000 + int(bb.data.getVar('K_MICRO',d,1)) * 10000 + float(bb.data.getVar('HHV',d,1)))}"

KERNEL_FILENAME = "${KERNEL_IMAGETYPE}-${PV}-${PR}-${MACHINE}.bin"

do_configure() {

	if [ `grep EXTRAVERSION Makefile | grep hh | awk '{print $3}' | sed s/-hh//` != ${HHV} ]; then
		die "-hh version mismatch"
	fi

	rm -f ${S}/.config

	if [ ! -e ${WORKDIR}/defconfig ]; then
		die "No default configuration for ${MACHINE} available."
	fi


	if [ "${TARGET_OS}" == "linux-gnueabi" -o  "${TARGET_OS}" == "linux-uclibcgnueabi" ]; then
		echo "CONFIG_AEABI=y"                   >> ${S}/.config
		echo "CONFIG_OABI_COMPAT=y"             >> ${S}/.config
	else
		echo "# CONFIG_AEABI is not set"        >> ${S}/.config
		echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
	fi

	sed 	-e '/CONFIG_AEABI/d' \
		-e '/CONFIG_OABI_COMPAT=/d' \
		'${WORKDIR}/defconfig' >>'${S}/.config'

	yes '' | oe_runmake oldconfig

}

do_deploy() {
	install -d ${DEPLOY_DIR_IMAGE}
	install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_FILENAME}

	#reflash.ctl is required to reflash using bootldr
	# format:
	# name file md5sumfile destination
	echo "${MACHINE}-kernel-${DATETIME} ${KERNEL_FILENAME} - kernel" >> ${DEPLOY_DIR_IMAGE}/reflash.ctl
	gen_haret_startup
}   
   
do_deploy[dirs] = "${S}"

addtask deploy before do_package after do_install


gen_haret_startup() {
	cat >${DEPLOY_DIR_IMAGE}/startup.txt <<EOF 
# This is startup file for HaRET, Linux bootloader for WinCE
# http://handhelds.org/wiki/HaRET

set kernel "${KERNEL_FILENAME}"

# Boot choices. Uncomment 'set' statements in exactly one section

## Choice 1 - Boot from SD/MMC card
# Have 2 partition on a card:
# 1st - FAT with HaRET executable, this file and zImage above
# 2nd - EXT2 with rootfs tarball extracted
set cmdline "root=/dev/mmcblk0p2 rootdelay=10 console=ttyS0,115200n8 console=tty0"

## Choice 2 - Boot from CF card, setup like above
#set cmdline "root=/dev/hda2 rootdelay=10 console=ttyS0,115200n8 console=tty0"

## Choice 3 - Boot rootfs image as initramfs (works only for smaller images)
# have a cpio.gz file below together with zImage, no EXT2 partition required
#set initrd "<image>.rootfs.cpio.gz"
#set cmdline "rdinit=/sbin/init console=ttyS0,115200n8 console=tty0"

## Choice 4 - Boot via NFS over USB networking (must be kernel-builtin)
# 192.168.x.x - Server address (the other side)
# 192.168.y.y - Handheld's address
#set cmdline "root=/dev/nfs nfsroot=192.168.x.x:<nfs_path> ip=192.168.y.y:192.168.x.x:192.168.x.x:255.255.255.0:pda:usb0 console=ttyS0,115200n8 console=tty0"

## Choice 5 - Boot from MTD partition, for devices with lots of flash
#  to have both WinCE and Linux there. Note the value of root param,
#  that's how it should be, not "/dev/mtdblockN".
# set cmdline "root=mtdN console=ttyS0,115200n8 console=tty0"

bootlinux
EOF
}