diff -Nru linux-2.6.26/drivers/mtd/nand/fsl_elbc_nand.c linux-2.6.26.modified/drivers/mtd/nand/fsl_elbc_nand.c
--- linux-2.6.26/drivers/mtd/nand/fsl_elbc_nand.c	2008-07-13 23:51:29.000000000 +0200
+++ linux-2.6.26.modified/drivers/mtd/nand/fsl_elbc_nand.c	2008-10-24 13:43:30.000000000 +0200
@@ -89,7 +89,7 @@
 	.eccbytes = 3,
 	.eccpos = {6, 7, 8},
 	.oobfree = { {0, 5}, {9, 7} },
-	.oobavail = 12,
+//	.oobavail = 12,
 };
 
 /* Small Page FLASH with FMR[ECCM] = 1 */
@@ -97,7 +97,7 @@
 	.eccbytes = 3,
 	.eccpos = {8, 9, 10},
 	.oobfree = { {0, 5}, {6, 2}, {11, 5} },
-	.oobavail = 12,
+	//.oobavail = 12,
 };
 
 /* Large Page FLASH with FMR[ECCM] = 0 */
@@ -105,7 +105,7 @@
 	.eccbytes = 12,
 	.eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
 	.oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
-	.oobavail = 48,
+	//.oobavail = 48,
 };
 
 /* Large Page FLASH with FMR[ECCM] = 1 */
@@ -113,7 +113,48 @@
 	.eccbytes = 12,
 	.eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
 	.oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
-	.oobavail = 48,
+//	.oobavail = 48,
+};
+/*
+ * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset
+ * 1, so we have to adjust bad block pattern. This pattern should be used for
+ * x8 chips only. So far hardware does not support x16 chips anyway.
+ */
+static u8 scan_ff_pattern[] = { 0xff, };
+
+static struct nand_bbt_descr largepage_memorybased = {
+	.options = 0,
+	.offs = 0,
+	.len = 1,
+	.pattern = scan_ff_pattern,
+};
+
+/*
+ * ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt,
+ * interfere with ECC positions, that's why we implement our own descriptors.
+ * OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0.
+ */
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	11,
+	.len = 4,
+	.veroffs = 15,
+	.maxblocks = 4,
+	.pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	11,
+	.len = 4,
+	.veroffs = 15,
+	.maxblocks = 4,
+	.pattern = mirror_pattern,
 };
 
 /*=================================*/
@@ -687,8 +728,9 @@
 			chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
 			                   &fsl_elbc_oob_lp_eccm1 :
 			                   &fsl_elbc_oob_lp_eccm0;
-			mtd->ecclayout = chip->ecc.layout;
-			mtd->oobavail = chip->ecc.layout->oobavail;
+			//mtd->ecclayout = chip->ecc.layout;
+			//mtd->oobavail = chip->ecc.layout->oobavail;
+			chip->badblock_pattern = &largepage_memorybased;
 		}
 	} else {
 		dev_err(ctrl->dev,
@@ -752,8 +794,12 @@
 	chip->cmdfunc = fsl_elbc_cmdfunc;
 	chip->waitfunc = fsl_elbc_wait;
 
+	chip->bbt_td = &bbt_main_descr;
+	chip->bbt_md = &bbt_mirror_descr;
+
 	/* set up nand options */
-	chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+	//chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+	chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT;
 
 	chip->controller = &ctrl->controller;
 	chip->priv = priv;