NEW_LEDS support for the IOMega NAS100D

Signed-off-by: John Bowler <jbowler@acm.org>

---
 arch/arm/mach-ixp4xx/nas100d-setup.c |   43 ++++++++++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

--- linux-ixp4xx.orig/arch/arm/mach-ixp4xx/nas100d-setup.c	2006-02-21 01:40:40.000000000 +0100
+++ linux-ixp4xx/arch/arm/mach-ixp4xx/nas100d-setup.c	2006-02-21 01:53:48.000000000 +0100
@@ -16,6 +16,7 @@
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/mtd.h>
+#include <linux/leds.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -42,6 +43,36 @@ static struct platform_device nas100d_fl
 	.resource		= &nas100d_flash_resource,
 };
 
+#ifdef CONFIG_LEDS_CLASS
+static struct resource nas100d_led_resources[] = {
+	{
+		.name		= "wlan",   /* green led */
+		.start		= 0,
+		.end		= 0,
+		.flags		= IXP4XX_GPIO_LOW,
+	},
+	{
+		.name		= "ready",  /* blue power led (off is flashing!) */
+		.start		= 15,
+		.end		= 15,
+		.flags		= IXP4XX_GPIO_LOW,
+	},
+	{
+		.name		= "disk-1", /* yellow led */
+		.start		= 3,
+		.end		= 3,
+		.flags		= IXP4XX_GPIO_LOW,
+	},
+};
+
+static struct platform_device nas100d_leds = {
+	.name			= "IXP4XX-GPIO-LED",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(nas100d_led_resources),
+	.resource		= nas100d_led_resources,
+};
+#endif
+
 static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = {
 	.sda_pin		= NAS100D_SDA_PIN,
 	.scl_pin		= NAS100D_SCL_PIN,
@@ -100,7 +131,6 @@ static struct platform_device nas100d_ua
 static struct platform_device *nas100d_devices[] __initdata = {
 	&nas100d_i2c_controller,
 	&nas100d_flash,
-	&nas100d_uart,
 };
 
 static void nas100d_power_off(void)
@@ -160,7 +190,18 @@ static void __init nas100d_init(void)
 
 	pm_power_off = nas100d_power_off;
 
+	/* This is only useful on a modified machine, but it is valuable
+	 * to have it first in order to see debug messages, and so that
+	 * it does *not* get removed if platform_add_devices fails!
+	 */
+	(void)platform_device_register(&nas100d_uart);
+
 	platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
+
+#ifdef CONFIG_LEDS_CLASS
+	/* We don't care whether or not this works. */
+	(void)platform_device_register(&nas100d_leds);
+#endif
 }
 
 /*