Include a fixup machine start function in nslu2-setup.c to handle the command line and memory setup parameters which are not specifiable in the boot loader. Signed-off-by: John Bowler arch/arm/mach-ixp4xx/nslu2-setup.c | 45 ++++++++++++++++++++++++++++++++++++- 1 file changed, 44 insertions(+), 1 deletion(-) --- linux-nslu2.orig/arch/arm/mach-ixp4xx/nslu2-setup.c 2006-02-06 22:35:31.000000000 +0100 +++ linux-nslu2/arch/arm/mach-ixp4xx/nslu2-setup.c 2006-02-06 22:43:44.000000000 +0100 @@ -18,6 +18,8 @@ #include #include +#include +#include #include #include #include @@ -170,11 +172,52 @@ static void __init nslu2_init(void) platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); } +/* + * NSLU2 RedBoot passes garbage atag/parameter values because it copies + * the kernel zImage on top of the parameter list before branching into + * the zImage. The machine description causes the ATAG list to be + * skipped (by setting boot_params to 0) and this code fixes up the + * memory info and command line by supplying a command line with the + * NSLU2 specific config prepended. + * + * NOTE: the startup sequence is: + * 1) Call the machine fixup + * 2) Parse the ATAG list, the ATAG_CMDLINE is copied in + * to default_command_line which is the value of *from + * 3) Parse the command line in *from (*not* + * default_command_line unless they are the same!) + * + * Setting mi->nr_banks causes (2) to 'squash' (set to ATAG_NONE) + * any ATAG_MEM tags, but mem= command line options cause nr_banks + * to be reset to 0 (on the first mem=) + */ +static char nslu2_command_line[] __initdata = + "root=/dev/mtdblock4 rootfstype=jffs2 init=/linuxrc " + "rtc-x1205.probe=0,0x6f " + CONFIG_CMDLINE; + +static void __init nslu2_fixup(struct machine_desc *desc, + struct tag *tags, char **cmdline, struct meminfo *mi) +{ + /* The NSLU2 has one bank of 32MByte memory. + * NOTE: to make a 'fatslug' work append the appropriate + * mem= to the CONFIG_CMDLINE - this will override the + * setting below. + */ + mi->nr_banks=1; + mi->bank[0].start = 0; + mi->bank[0].size = (32*1024*1024); + mi->bank[0].node = PHYS_TO_NID(0); + + strlcpy(*cmdline, nslu2_command_line, COMMAND_LINE_SIZE); +} + MACHINE_START(NSLU2, "Linksys NSLU2") /* Maintainer: www.nslu2-linux.org */ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, - .boot_params = 0x00000100, + .boot_params = 0, /* because they are garbage - see above */ + .fixup = nslu2_fixup, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer,