*** ixp/ixp400_eth.c.orig	Wed Jun  7 21:31:59 2006
--- ixp/ixp400_eth.c	Fri Jun  9 14:55:18 2006
***************
*** 112,135 ****
  #define MOD_VERSION "1.5"
  
  /* Module parameters */
! static int npe_learning = 1;      /* default : NPE learning & filtering enable */
! static int log_level = 0;         /* default : no log */
! static int no_ixp400_sw_init = 0; /* default : init core components of the IXP400 Software */
! static int no_phy_scan = 0;       /* default : do phy discovery */
! static int phy_reset = 0;         /* default : mo phy reset */
  
  /* maximum number of ports supported by this driver ixp0, ixp1 ....
   * The default is to configure all ports defined in EthAcc component
  */
  #ifdef CONFIG_IXP400_ETH_NPEC_ONLY
! static int dev_max_count = 1; /* only NPEC is used */
! #elif defined (CONFIG_IXP400_ETH_NPEB_ONLY)
! static int dev_max_count = 1; /* only NPEB is used */
  #elif defined (CONFIG_ARCH_IXDP425) || defined(CONFIG_ARCH_IXDPG425)\
        || defined (CONFIG_ARCH_ADI_COYOTE)
! static int dev_max_count = 2; /* only NPEB and NPEC */
  #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
! static int dev_max_count = 3; /* all NPEs are used */
  #endif
  
  #ifndef CONFIG_IXP400_NAPI
--- 112,136 ----
  #define MOD_VERSION "1.5"
  
  /* Module parameters */
! /* gcc 4.1.1+kernel2.6.16 do not like it if these are static! */
! int npe_learning = 1;      /* default : NPE learning & filtering enable */
! int log_level = 0;         /* default : no log */
! int no_ixp400_sw_init = 0; /* default : init core components of the IXP400 Software */
! int no_phy_scan = 0;       /* default : do phy discovery */
! int phy_reset = 0;         /* default : mo phy reset */
  
  /* maximum number of ports supported by this driver ixp0, ixp1 ....
   * The default is to configure all ports defined in EthAcc component
  */
  #ifdef CONFIG_IXP400_ETH_NPEC_ONLY
! int dev_max_count = 1; /* only NPEC is used */
! elif defined (CONFIG_IXP400_ETH_NPEB_ONLY)
! int dev_max_count = 1; /* only NPEB is used */
  #elif defined (CONFIG_ARCH_IXDP425) || defined(CONFIG_ARCH_IXDPG425)\
        || defined (CONFIG_ARCH_ADI_COYOTE)
! int dev_max_count = 2; /* only NPEB and NPEC */
  #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
! int dev_max_count = 3; /* all NPEs are used */
  #endif
  
  #ifndef CONFIG_IXP400_NAPI
***************
*** 138,146 ****
   * skbuf to push into the linux stack, and avoid the performance degradations 
   * during overflow.
   */
! static int ixp400_netdev_max_backlog = 290;
  
! static int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
  
  MODULE_PARM(ixp400_netdev_max_backlog, "i");
  MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
--- 139,147 ----
   * skbuf to push into the linux stack, and avoid the performance degradations 
   * during overflow.
   */
! int ixp400_netdev_max_backlog = 290;
  
! int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
  
  MODULE_PARM(ixp400_netdev_max_backlog, "i");
  MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");