--- linux/net/Makefile 3 Dec 2003 19:15:16 -0000 1.25 +++ linux/net/Makefile 20 Feb 2003 15:50:38 -0000 1.24 @@ -19,6 +19,7 @@ subdir-$(CONFIG_NETFILTER) += ipv4/netfilter subdir-$(CONFIG_UNIX) += unix subdir-$(CONFIG_IPV6) += ipv6 +subdir-$(CONFIG_IPSEC) += ipsec ifneq ($(CONFIG_IPV6),n) ifneq ($(CONFIG_IPV6),) --- /dev/null 2004-02-02 20:32:13.000000000 +0000 +++ linux/include/zlib/zlib.h 2004-07-05 23:56:59.000000000 +0100 @@ -0,0 +1,893 @@ +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.1.4, March 11th, 2002 + + Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt + (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). +*/ + +#ifndef _ZLIB_H +#define _ZLIB_H + +#include "zconf.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ZLIB_VERSION "1.1.4" + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed + data. This version of the library supports only one compression method + (deflation) but other algorithms will be added later and will have the same + stream interface. + + Compression can be done in a single step if the buffers are large + enough (for example if an input file is mmap'ed), or can be done by + repeated calls of the compression function. In the latter case, the + application must provide more input and/or consume the output + (providing more output space) before each call. + + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never + crash even in case of corrupted input. +*/ + +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address)); + +struct internal_state; + +typedef struct z_stream_s { + Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total nb of input bytes read so far */ + + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total nb of bytes output so far */ + + const char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ + + int data_type; /* best guess about the data type: ascii or binary */ + uLong adler; /* adler32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ +} z_stream; + +typedef z_stream FAR *z_streamp; + +/* + The application must update next_in and avail_in when avail_in has + dropped to zero. It must update next_out and avail_out when avail_out + has dropped to zero. The application must initialize zalloc, zfree and + opaque before calling the init function. All other fields are set by the + compression library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. + + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this + if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, + pointers returned by zalloc for objects of exactly 65536 bytes *must* + have their offset normalized to zero. The default allocation function + provided by this library ensures this (see zutil.c). To reduce memory + requirements and avoid any allocation of 64K objects, at the expense of + compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or + progress reports. After compression, total_in holds the total size of + the uncompressed data and may be saved for use in the decompressor + (particularly if the decompressor wants to decompress everything in + a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +/* Allowed flush values; see deflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative + * values are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_ASCII 1 +#define Z_UNKNOWN 2 +/* Possible values of the data_type field */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + /* basic functions */ + +ZEXTERN const char * ZEXPORT zlibVersion OF((void)); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is + not compatible with the zlib.h header file used by the application. + This check is automatically made by deflateInit and inflateInit. + */ + +/* +ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. + If zalloc and zfree are set to Z_NULL, deflateInit updates them to + use default allocation functions. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at + all (the input data is simply copied a block at a time). + Z_DEFAULT_COMPRESSION requests a default compromise between speed and + compression (currently equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if level is not a valid compression level, + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). + msg is set to null if there is no error message. deflateInit does not + perform any compression: this will be done by deflate(). +*/ + + +ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); +/* + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce some + output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary (in interactive applications). + Some output may be provided even if flush is not set. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating avail_in or avail_out accordingly; avail_out + should never be zero before the call. The application can consume the + compressed output when it wants, for example when the output buffer is full + (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK + and with zero avail_out, it must be called again after making room in the + output buffer because there might be more output pending. + + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In particular + avail_in is zero after the call if enough output space has been provided + before the call.) Flushing may degrade compression for some compression + algorithms and so it should be used only when necessary. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + the compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there + was enough output space; if deflate returns with Z_OK, this function must be + called again with Z_FINISH and more output space (updated avail_out) but no + more input data, until it returns with Z_STREAM_END or an error. After + deflate has returned Z_STREAM_END, the only possible operations on the + stream are deflateReset or deflateEnd. + + Z_FINISH can be used immediately after deflateInit if all the compression + is to be done in a single step. In this case, avail_out must be at least + 0.1% larger than avail_in plus 12 bytes. If deflate does not return + Z_STREAM_END, then it must be called again as described above. + + deflate() sets strm->adler to the adler32 checksum of all input read + so far (that is, total_in bytes). + + deflate() may update data_type if it can make a good guess about + the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered + binary. This field is only for information purposes and does not affect + the compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible + (for example avail_in or avail_out was zero). +*/ + + +ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, + msg may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); + + Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. If next_in is not Z_NULL and avail_in is large enough (the exact + value depends on the compression method), inflateInit determines the + compression method from the zlib header and allocates all data structures + accordingly; otherwise the allocation will be deferred to the first call of + inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to + use default allocation functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller. msg is set to null if there is no error + message. inflateInit does not perform any decompression apart from reading + the zlib header if present: this will be done by inflate(). (So next_in and + avail_in may be modified, but next_out and avail_out are unchanged.) +*/ + + +ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); +/* + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may some + introduce some output latency (reading input without producing any output) + except when forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing + will resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there + is no more input data or no more space in the output buffer (see below + about the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating the next_* and avail_* values accordingly. + The application can consume the uncompressed output when it wants, for + example when the output buffer is full (avail_out == 0), or after each + call of inflate(). If inflate returns Z_OK and with zero avail_out, it + must be called again after making room in the output buffer because there + might be more output pending. + + If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much + output as possible to the output buffer. The flushing behavior of inflate is + not specified for values of the flush parameter other than Z_SYNC_FLUSH + and Z_FINISH, but the current implementation actually flushes as much output + as possible anyway. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step + (a single call of inflate), the parameter flush should be set to + Z_FINISH. In this case all pending input is processed and all pending + output is flushed; avail_out must be large enough to hold all the + uncompressed data. (The size of the uncompressed data may have been saved + by the compressor for this purpose.) The next operation on this stream must + be inflateEnd to deallocate the decompression state. The use of Z_FINISH + is never required, but can be used to inform inflate that a faster routine + may be used for the single inflate() call. + + If a preset dictionary is needed at this point (see inflateSetDictionary + below), inflate sets strm-adler to the adler32 checksum of the + dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise + it sets strm->adler to the adler32 checksum of all output produced + so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or + an error code as described below. At the end of the stream, inflate() + checks that its computed adler32 checksum is equal to that saved by the + compressor and returns Z_STREAM_END only if the checksum is correct. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect + adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent + (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if no progress is possible or if there was not + enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR + case, the application may then call inflateSync to look for a good + compression block. +*/ + + +ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy)); + + This is another version of deflateInit with more compression options. The + fields next_in, zalloc, zfree and opaque must be initialized before by + the caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but + is slow and reduces compression ratio; memLevel=9 uses maximum memory + for optimal speed. The default value is 8. See zconf.h for total memory + usage as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match). Filtered data consists mostly of small values with a + somewhat random distribution. In this case, the compression algorithm is + tuned to compress them better. The effect of Z_FILTERED is to force more + Huffman coding and less string matching; it is somewhat intermediate + between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects + the compression ratio but not the correctness of the compressed output even + if it is not set appropriately. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid + method). msg is set to null if there is no error message. deflateInit2 does + not perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. This function must be called + immediately after deflateInit, deflateInit2 or deflateReset, before any + call of deflate. The compressor and decompressor must use exactly the same + dictionary (see inflateSetDictionary). + + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size in + deflate or deflate2. Thus the strings most likely to be useful should be + put at the end of the dictionary, not at the front. + + Upon return of this function, strm->adler is set to the Adler32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The Adler32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if the compression method is bsort). deflateSetDictionary does not + perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and + can consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); +/* + This function is equivalent to deflateEnd followed by deflateInit, + but does not free and reallocate all the internal compression state. + The stream will keep the same compression level and any other attributes + that may have been set by deflateInit2. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + +ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, + int level, + int strategy)); +/* + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2. This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different + strategy. If the compression level is changed, the input available so far + is compressed with the old level (and may be flushed); the new level will + take effect only at the next call of deflate(). + + Before the call of deflateParams, the stream state must be set as for + a call of deflate(), since the currently available input may have to + be compressed and flushed. In particular, strm->avail_out must be non-zero. + + deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source + stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR + if strm->avail_out was zero. +*/ + +/* +ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, + int windowBits)); + + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. If a compressed stream with a larger window size is given as + input, inflate() will return with the error code Z_DATA_ERROR instead of + trying to allocate a larger window. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative + memLevel). msg is set to null if there is no error message. inflateInit2 + does not perform any decompression apart from reading the zlib header if + present: this will be done by inflate(). (So next_in and avail_in may be + modified, but next_out and avail_out are unchanged.) +*/ + +ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate + if this call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the Adler32 value returned by this call of + inflate. The compressor and decompressor must use exactly the same + dictionary (see deflateSetDictionary). + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect Adler32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); +/* + Skips invalid compressed data until a full flush point (see above the + description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided. + + inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR + if no more input was provided, Z_DATA_ERROR if no flush point has been found, + or Z_STREAM_ERROR if the stream structure was inconsistent. In the success + case, the application may save the current current value of total_in which + indicates where valid compressed data was found. In the error case, the + application may repeatedly call inflateSync, providing more input each time, + until success or end of the input data. +*/ + +ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. + The stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + + + /* utility functions */ + +/* + The following utility functions are implemented on top of the + basic stream-oriented functions. To simplify the interface, some + default options are assumed (compression level and memory usage, + standard memory allocation functions). The source code of these + utility functions can easily be modified if you need special options. +*/ + +ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be at least 0.1% larger than + sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the + compressed buffer. + This function can be used to compress a whole file at once if the + input file is mmap'ed. + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int level)); +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least 0.1% larger than sourceLen plus + 12 bytes. Upon exit, destLen is the actual size of the compressed buffer. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be large enough to hold the + entire uncompressed data. (The size of the uncompressed data must have + been saved previously by the compressor and transmitted to the decompressor + by some mechanism outside the scope of this compression library.) + Upon exit, destLen is the actual size of the compressed buffer. + This function can be used to decompress a whole file at once if the + input file is mmap'ed. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted. +*/ + + +typedef voidp gzFile; + +ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); +/* + Opens a gzip (.gz) file for reading or writing. The mode parameter + is as in fopen ("rb" or "wb") but can also include a compression level + ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for + Huffman only compression as in "wb1h". (See the description + of deflateInit2 for more information about the strategy parameter.) + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. + + gzopen returns NULL if the file could not be opened or if there was + insufficient memory to allocate the (de)compression state; errno + can be checked to distinguish the two cases (if errno is zero, the + zlib error is Z_MEM_ERROR). */ + +ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); +/* + gzdopen() associates a gzFile with the file descriptor fd. File + descriptors are obtained from calls like open, dup, creat, pipe or + fileno (in the file has been previously opened with fopen). + The mode parameter is as in gzopen. + The next call of gzclose on the returned gzFile will also close the + file descriptor fd, just like fclose(fdopen(fd), mode) closes the file + descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). + gzdopen returns NULL if there was insufficient memory to allocate + the (de)compression state. +*/ + +ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); +/* + Dynamically update the compression level or strategy. See the description + of deflateInit2 for the meaning of these parameters. + gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not + opened for writing. +*/ + +ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); +/* + Reads the given number of uncompressed bytes from the compressed file. + If the input file was not in gzip format, gzread copies the given number + of bytes into the buffer. + gzread returns the number of uncompressed bytes actually read (0 for + end of file, -1 for error). */ + +ZEXTERN int ZEXPORT gzwrite OF((gzFile file, + const voidp buf, unsigned len)); +/* + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes actually written + (0 in case of error). +*/ + +ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...)); +/* + Converts, formats, and writes the args to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written (0 in case of error). +*/ + +ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); +/* + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + gzputs returns the number of characters written, or -1 in case of error. +*/ + +ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); +/* + Reads bytes from the compressed file until len-1 characters are read, or + a newline character is read and transferred to buf, or an end-of-file + condition is encountered. The string is then terminated with a null + character. + gzgets returns buf, or Z_NULL in case of error. +*/ + +ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); +/* + Writes c, converted to an unsigned char, into the compressed file. + gzputc returns the value that was written, or -1 in case of error. +*/ + +ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); +/* + Reads one byte from the compressed file. gzgetc returns this byte + or -1 in case of end of file or error. +*/ + +ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); +/* + Flushes all pending output into the compressed file. The parameter + flush is as in the deflate() function. The return value is the zlib + error number (see function gzerror below). gzflush returns Z_OK if + the flush parameter is Z_FINISH and all output could be flushed. + gzflush should be called only when strictly necessary because it can + degrade compression. +*/ + +ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, + z_off_t offset, int whence)); +/* + Sets the starting position for the next gzread or gzwrite on the + given compressed file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); +/* + Rewinds the given file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) +*/ + +ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); +/* + Returns the starting position for the next gzread or gzwrite on the + given compressed file. This position represents a number of bytes in the + uncompressed data stream. + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +ZEXTERN int ZEXPORT gzeof OF((gzFile file)); +/* + Returns 1 when EOF has previously been detected reading the given + input stream, otherwise zero. +*/ + +ZEXTERN int ZEXPORT gzclose OF((gzFile file)); +/* + Flushes all pending output if necessary, closes the compressed file + and deallocates all the (de)compression state. The return value is the zlib + error number (see function gzerror below). +*/ + +ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); +/* + Returns the error message for the last error which occurred on the + given compressed file. errnum is set to zlib error number. If an + error occurred in the file system and not in the compression library, + errnum is set to Z_ERRNO and the application may consult errno + to get the exact error code. +*/ + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the + compression library. +*/ + +ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); + +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is NULL, this function returns + the required initial value for the checksum. + An Adler-32 checksum is almost as reliable as a CRC32 but can be computed + much faster. Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); +/* + Update a running crc with the bytes buf[0..len-1] and return the updated + crc. If buf is NULL, this function returns the required initial value + for the crc. Pre- and post-conditioning (one's complement) is performed + within this function so it shouldn't be done by the application. + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, + int windowBits, int memLevel, + int strategy, const char *version, + int stream_size)); +ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, + const char *version, int stream_size)); +#define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) +#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) + + +#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL) + struct internal_state {int dummy;}; /* hack for buggy compilers */ +#endif + +ZEXTERN const char * ZEXPORT zError OF((int err)); +ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z)); +ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); + +#ifdef __cplusplus +} +#endif + +#endif /* _ZLIB_H */ --- /dev/null 2004-02-02 20:32:13.000000000 +0000 +++ linux/include/zlib/zutil.h 2004-07-05 23:59:30.000000000 +0100 @@ -0,0 +1,225 @@ +/* zutil.h -- internal interface and configuration of the compression library + * Copyright (C) 1995-2002 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* @(#) $Id$ */ + +#ifndef _Z_UTIL_H +#define _Z_UTIL_H + +#include "zlib.h" + +#include <linux/string.h> +#define HAVE_MEMCPY + +#if 0 // #ifdef STDC +# include <stddef.h> +# include <string.h> +# include <stdlib.h> +#endif +#ifndef __KERNEL__ +#ifdef NO_ERRNO_H + extern int errno; +#else +# include <errno.h> +#endif +#endif + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +typedef unsigned char uch; +typedef uch FAR uchf; +typedef unsigned short ush; +typedef ush FAR ushf; +typedef unsigned long ulg; + +extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */ +/* (size given to avoid silly warnings with Visual C++) */ + +#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] + +#define ERR_RETURN(strm,err) \ + return (strm->msg = ERR_MSG(err), (err)) +/* To be used only when the state is known to be valid */ + + /* common constants */ + +#ifndef DEF_WBITS +# define DEF_WBITS MAX_WBITS +#endif +/* default windowBits for decompression. MAX_WBITS is for compression only */ + +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +/* default memLevel */ + +#define STORED_BLOCK 0 +#define STATIC_TREES 1 +#define DYN_TREES 2 +/* The three kinds of block type */ + +#define MIN_MATCH 3 +#define MAX_MATCH 258 +/* The minimum and maximum match lengths */ + +#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ + + /* target dependencies */ + +#ifdef MSDOS +# define OS_CODE 0x00 +# if defined(__TURBOC__) || defined(__BORLANDC__) +# if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) + /* Allow compilation with ANSI keywords only enabled */ + void _Cdecl farfree( void *block ); + void *_Cdecl farmalloc( unsigned long nbytes ); +# else +# include <alloc.h> +# endif +# else /* MSC or DJGPP */ +# include <malloc.h> +# endif +#endif + +#ifdef OS2 +# define OS_CODE 0x06 +#endif + +#ifdef WIN32 /* Window 95 & Windows NT */ +# define OS_CODE 0x0b +#endif + +#if defined(VAXC) || defined(VMS) +# define OS_CODE 0x02 +# define F_OPEN(name, mode) \ + fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512") +#endif + +#ifdef AMIGA +# define OS_CODE 0x01 +#endif + +#if defined(ATARI) || defined(atarist) +# define OS_CODE 0x05 +#endif + +#if defined(MACOS) || defined(TARGET_OS_MAC) +# define OS_CODE 0x07 +# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os +# include <unix.h> /* for fdopen */ +# else +# ifndef fdopen +# define fdopen(fd,mode) NULL /* No fdopen() */ +# endif +# endif +#endif + +#ifdef __50SERIES /* Prime/PRIMOS */ +# define OS_CODE 0x0F +#endif + +#ifdef TOPS20 +# define OS_CODE 0x0a +#endif + +#if defined(_BEOS_) || defined(RISCOS) +# define fdopen(fd,mode) NULL /* No fdopen() */ +#endif + +#if (defined(_MSC_VER) && (_MSC_VER > 600)) +# define fdopen(fd,type) _fdopen(fd,type) +#endif + + + /* Common defaults */ + +#ifndef OS_CODE +# define OS_CODE 0x03 /* assume Unix */ +#endif + +#ifndef F_OPEN +# define F_OPEN(name, mode) fopen((name), (mode)) +#endif + + /* functions */ + +#ifdef HAVE_STRERROR + extern char *strerror OF((int)); +# define zstrerror(errnum) strerror(errnum) +#else +# define zstrerror(errnum) "" +#endif + +#if defined(pyr) +# define NO_MEMCPY +#endif +#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__) + /* Use our own functions for small and medium model with MSC <= 5.0. + * You may have to use the same strategy for Borland C (untested). + * The __SC__ check is for Symantec. + */ +# define NO_MEMCPY +#endif +#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY) +# define HAVE_MEMCPY +#endif +#ifdef HAVE_MEMCPY +# ifdef SMALL_MEDIUM /* MSDOS small or medium model */ +# define zmemcpy _fmemcpy +# define zmemcmp _fmemcmp +# define zmemzero(dest, len) _fmemset(dest, 0, len) +# else +# define zmemcpy memcpy +# define zmemcmp memcmp +# define zmemzero(dest, len) memset(dest, 0, len) +# endif +#else + extern void zmemcpy OF((Bytef* dest, const Bytef* source, uInt len)); + extern int zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len)); + extern void zmemzero OF((Bytef* dest, uInt len)); +#endif + +/* Diagnostic functions */ +#ifdef DEBUG +# include <stdio.h> + extern int z_verbose; + extern void z_error OF((char *m)); +# define Assert(cond,msg) {if(!(cond)) z_error(msg);} +# define Trace(x) {if (z_verbose>=0) fprintf x ;} +# define Tracev(x) {if (z_verbose>0) fprintf x ;} +# define Tracevv(x) {if (z_verbose>1) fprintf x ;} +# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} +# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + + +typedef uLong (ZEXPORT *check_func) OF((uLong check, const Bytef *buf, + uInt len)); +voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); +void zcfree OF((voidpf opaque, voidpf ptr)); + +#define ZALLOC(strm, items, size) \ + (*((strm)->zalloc))((strm)->opaque, (items), (size)) +#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr)) +#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} + +#endif /* _Z_UTIL_H */ --- /dev/null 2004-02-02 20:32:13.000000000 +0000 +++ linux/include/zconf.h 2004-07-04 15:38:31.000000000 +0100 @@ -0,0 +1,309 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2002 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef _ZCONF_H +#define _ZCONF_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + */ +#ifdef IPCOMP_PREFIX +# define deflateInit_ ipcomp_deflateInit_ +# define deflate ipcomp_deflate +# define deflateEnd ipcomp_deflateEnd +# define inflateInit_ ipcomp_inflateInit_ +# define inflate ipcomp_inflate +# define inflateEnd ipcomp_inflateEnd +# define deflateInit2_ ipcomp_deflateInit2_ +# define deflateSetDictionary ipcomp_deflateSetDictionary +# define deflateCopy ipcomp_deflateCopy +# define deflateReset ipcomp_deflateReset +# define deflateParams ipcomp_deflateParams +# define inflateInit2_ ipcomp_inflateInit2_ +# define inflateSetDictionary ipcomp_inflateSetDictionary +# define inflateSync ipcomp_inflateSync +# define inflateSyncPoint ipcomp_inflateSyncPoint +# define inflateReset ipcomp_inflateReset +# define compress ipcomp_compress +# define compress2 ipcomp_compress2 +# define uncompress ipcomp_uncompress +# define adler32 ipcomp_adler32 +# define crc32 ipcomp_crc32 +# define get_crc_table ipcomp_get_crc_table +/* SSS: these also need to be prefixed to avoid clash with ppp_deflate and ext2compression */ +# define inflate_blocks ipcomp_deflate_blocks +# define inflate_blocks_free ipcomp_deflate_blocks_free +# define inflate_blocks_new ipcomp_inflate_blocks_new +# define inflate_blocks_reset ipcomp_inflate_blocks_reset +# define inflate_blocks_sync_point ipcomp_inflate_blocks_sync_point +# define inflate_set_dictionary ipcomp_inflate_set_dictionary +# define inflate_codes ipcomp_inflate_codes +# define inflate_codes_free ipcomp_inflate_codes_free +# define inflate_codes_new ipcomp_inflate_codes_new +# define inflate_fast ipcomp_inflate_fast +# define inflate_trees_bits ipcomp_inflate_trees_bits +# define inflate_trees_dynamic ipcomp_inflate_trees_dynamic +# define inflate_trees_fixed ipcomp_inflate_trees_fixed +# define inflate_flush ipcomp_inflate_flush +# define inflate_mask ipcomp_inflate_mask +# define _dist_code _ipcomp_dist_code +# define _length_code _ipcomp_length_code +# define _tr_align _ipcomp_tr_align +# define _tr_flush_block _ipcomp_tr_flush_block +# define _tr_init _ipcomp_tr_init +# define _tr_stored_block _ipcomp_tr_stored_block +# define _tr_tally _ipcomp_tr_tally +# define zError ipcomp_zError +# define z_errmsg ipcomp_z_errmsg +# define zlibVersion ipcomp_zlibVersion +# define match_init ipcomp_match_init +# define longest_match ipcomp_longest_match +#endif + +#ifdef Z_PREFIX +# define Byte z_Byte +# define uInt z_uInt +# define uLong z_uLong +# define Bytef z_Bytef +# define charf z_charf +# define intf z_intf +# define uIntf z_uIntf +# define uLongf z_uLongf +# define voidpf z_voidpf +# define voidp z_voidp +#endif + +#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32) +# define WIN32 +#endif +#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386) +# ifndef __32BIT__ +# define __32BIT__ +# endif +#endif +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#if defined(MSDOS) && !defined(__32BIT__) +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32)) && !defined(STDC) +# define STDC +#endif +#if defined(__STDC__) || defined(__cplusplus) || defined(__OS2__) +# ifndef STDC +# define STDC +# endif +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const +# endif +#endif + +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__) +# define NO_DUMMY_DECL +#endif + +/* Old Borland C incorrectly complains about missing returns: */ +#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500) +# define NEED_DUMMY_RETURN +#endif + + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +#endif +#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__)) +# ifndef __32BIT__ +# define SMALL_MEDIUM +# define FAR _far +# endif +#endif + +/* Compile with -DZLIB_DLL for Windows DLL support */ +#if defined(ZLIB_DLL) +# if defined(_WINDOWS) || defined(WINDOWS) +# ifdef FAR +# undef FAR +# endif +# include <windows.h> +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR _cdecl _export +# endif +# endif +# if defined (__BORLANDC__) +# if (__BORLANDC__ >= 0x0500) && defined (WIN32) +# include <windows.h> +# define ZEXPORT __declspec(dllexport) WINAPI +# define ZEXPORTRVA __declspec(dllexport) WINAPIV +# else +# if defined (_Windows) && defined (__DLL__) +# define ZEXPORT _export +# define ZEXPORTVA _export +# endif +# endif +# endif +#endif + +#if defined (__BEOS__) +# if defined (ZLIB_DLL) +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +#endif + +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif +#ifndef ZEXTERN +# define ZEXTERN extern +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(MACOS) && !defined(TARGET_OS_MAC) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#ifdef HAVE_UNISTD_H +# include <sys/types.h> /* for off_t */ +# include <unistd.h> /* for SEEK_* and off_t */ +# define z_off_t off_t +#endif +#ifndef SEEK_SET +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif +#ifndef z_off_t +# define z_off_t long +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) +# pragma map(deflateInit_,"DEIN") +# pragma map(deflateInit2_,"DEIN2") +# pragma map(deflateEnd,"DEEND") +# pragma map(inflateInit_,"ININ") +# pragma map(inflateInit2_,"ININ2") +# pragma map(inflateEnd,"INEND") +# pragma map(inflateSync,"INSY") +# pragma map(inflateSetDictionary,"INSEDI") +# pragma map(inflate_blocks,"INBL") +# pragma map(inflate_blocks_new,"INBLNE") +# pragma map(inflate_blocks_free,"INBLFR") +# pragma map(inflate_blocks_reset,"INBLRE") +# pragma map(inflate_codes_free,"INCOFR") +# pragma map(inflate_codes,"INCO") +# pragma map(inflate_fast,"INFA") +# pragma map(inflate_flush,"INFLU") +# pragma map(inflate_mask,"INMA") +# pragma map(inflate_set_dictionary,"INSEDI2") +# pragma map(ipcomp_inflate_copyright,"INCOPY") +# pragma map(inflate_trees_bits,"INTRBI") +# pragma map(inflate_trees_dynamic,"INTRDY") +# pragma map(inflate_trees_fixed,"INTRFI") +# pragma map(inflate_trees_free,"INTRFR") +#endif + +#endif /* _ZCONF_H */