# # Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher # --- Libnet-1.0.2a/aclocal.m4~configure +++ Libnet-1.0.2a/aclocal.m4 -dnl aclocal.m4 generated automatically by aclocal 1.4 - -dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl This program is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without -dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A -dnl PARTICULAR PURPOSE. - -dnl $Id$ -dnl -dnl Libnet specific autoconf macros -dnl Copyright (c) 1998, 1999, 2000 Mike D. Schiffman -dnl All rights reserved. -dnl - -dnl -dnl Checks to see if this linux kernel has a working PF_PACKET -dnl -dnl usage: -dnl -dnl AC_LIBNET_CHECK_PF_PACKET -dnl -dnl results: -dnl -dnl HAVE_PF_PACKET (DEFINED) -dnl - -AC_DEFUN(AC_LIBNET_CHECK_PF_PACKET, -[ - AC_MSG_CHECKING(for PF_PACKET) - AC_CACHE_VAL(ac_libnet_have_pf_packet, - - [case "$target_os" in - - linux) - ac_libnet_have_pf_packet = no - ;; - *) - - cat > pf_packet-test.c << EOF -#include -#if (__GLIBC__) -#include -#include -#else -#include -#include -#endif -#if (PF_PACKET) -#ifndef SOL_PACKET -#define SOL_PACKET 263 -#endif /* SOL_PACKET */ -#include -#endif -#include -#include - -int -main() -{ -#if (PF_PACKET) - int fd; - struct sockaddr_ll sa; - struct ifreq ifr; - struct packet_mreq mr; - char *device ="lo"; - - fd = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL)); - if (fd == -1) - { - printf("choked"); - exit (EXIT_FAILURE); - } - - memset(&sa, 0, sizeof(sa)); - strcpy(ifr.ifr_name, device); - if (ioctl(fd, SIOCGIFINDEX, &ifr) < 0) - { - printf("choked"); - exit (EXIT_FAILURE); - } - sa.sll_family = AF_PACKET; - sa.sll_ifindex = ifr.ifr_ifindex; - sa.sll_protocol = htons(ETH_P_ALL); - - memset(&mr, 0, sizeof (mr)); - mr.mr_ifindex = sa.sll_ifindex; - mr.mr_type = PACKET_MR_ALLMULTI; - - if (setsockopt(fd, SOL_PACKET, PACKET_ADD_MEMBERSHIP, (char *)&mr, - sizeof (mr)) < 0) - { - printf("choked\n"); - exit (EXIT_FAILURE); - } - /* yay. we made it and it workz! */ - printf("yes"); -#else /* PF_PACKET */ - printf("no"); -#endif - exit (EXIT_SUCCESS); -} -EOF - ${CC-cc} -o pf_packet-test $CFLAGS pf_packet-test.c >/dev/null 2>&1 - - # Oopz 4.3 BSD doesn't have this. Sorry. - if test ! -x ./pf_packet-test ; then - ac_libnet_have_pf_packet=choked - else - ac_libnet_have_pf_packet=`./pf_packet-test`; - fi - - if test $ac_libnet_have_pf_packet = choked; then - AC_MSG_RESULT(test program choked... assuming no) - elif test $ac_libnet_have_pf_packet = yes; then - AC_DEFINE(HAVE_PF_PACKET) - LIBNET_CONFIG_DEFINES="$LIBNET_CONFIG_DEFINES -DHAVE_PF_PACKET" - fi - - if test $ac_libnet_have_pf_packet != choked; then - AC_MSG_RESULT($ac_libnet_have_pf_packet) - fi - rm -f pf_packet-test* core core.pf_packet-test - ;; - esac]) -]) - -dnl -dnl Looks for a previous libnet version and attempts to determine which verion -dnl it is. Version 0.8 was the first version that actually knew internally -dnl what version it was. -dnl -dnl usage: -dnl -dnl AC_LIBNET_CHECK_LIBNET_VERSION -dnl -dnl results: -dnl -dnl -dnl - -AC_DEFUN(AC_LIBNET_CHECK_LIBNET_VER, -[ - AC_CHECK_LIB(net, libnet_build_ip, AC_MSG_CHECKING(version) \ - -changequote(<<, >>)dnl - if [[ ! -f $LIB_PREFIX/libnet.a ]] ; then -changequote([, ])dnl - AC_MSG_RESULT($LIB_PREFIX/libnet.a doesn't exist) - AC_MSG_RESULT(previous libnet install lives elsewhere, you should probably find it) - else - __LIBNET_VERSION=`strings $LIB_PREFIX/libnet.a | grep "libnet version"\ - | cut -f3 -d" "`;\ - if test -z "$__LIBNET_VERSION"; then - AC_MSG_RESULT(<0.8) - else - AC_MSG_RESULT($__LIBNET_VERSION) - fi - fi\ - ) -]) - - -dnl -dnl Checks to see if this linux kernel uses ip_sum or ip_csum -dnl (Pulled from queso) -dnl -dnl usage: -dnl -dnl AC_LIBNET_CHECK_IP_CSUM -dnl -dnl results: -dnl -dnl HAVE_STRUCT_IP_CSUM (DEFINED) -dnl - -AC_DEFUN(AC_LIBNET_CHECK_IP_CSUM, -[ - AC_MSG_CHECKING([struct ip contains ip_csum]) - AC_TRY_COMPILE([ - #define __BSD_SOURCE - #define _BSD_SOURCE - #include - #include - #include - #include ], - [ - struct ip ip; - ip.ip_csum = 0; - ], - [AC_MSG_RESULT(yes); - AC_DEFINE(HAVE_STRUCT_IP_CSUM)], - [AC_MSG_RESULT(no); - ]) -]) - -dnl -dnl Checks to see if unaligned memory accesses fail -dnl (Pulled from libpcap) -dnl -dnl usage: -dnl -dnl AC_LBL_UNALIGNED_ACCESS -dnl -dnl results: -dnl -dnl LBL_ALIGN (DEFINED) -dnl - -AC_DEFUN(AC_LBL_UNALIGNED_ACCESS, - [AC_MSG_CHECKING(if unaligned accesses fail) - AC_CACHE_VAL(ac_cv_lbl_unaligned_fail, - [case "$target_cpu" in - - alpha|hp*|mips|sparc) - ac_cv_lbl_unaligned_fail=yes - ;; - - *) - cat >conftest.c < -# include -# include - unsigned char a[[5]] = { 1, 2, 3, 4, 5 }; - main() - { - unsigned int i; - pid_t pid; - int status; - /* avoid "core dumped" message */ - pid = fork(); - if (pid < 0) - { - exit(2); - } - if (pid > 0) - { - /* parent */ - pid = waitpid(pid, &status, 0); - if (pid < 0) - { - exit(3); - } - exit(!WIFEXITED(status)); - } - /* child */ - i = *(unsigned int *)&a[[1]]; - printf("%d\n", i); - exit(0); - } -EOF - ${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS \ - conftest.c $LIBS > /dev/null 2>&1 - # Oopz 4.3 BSD doesn't have this. Sorry. - if test ! -x conftest ; then - dnl failed to compile for some reason - ac_cv_lbl_unaligned_fail=yes - else - ./conftest > conftest.out - if test ! -s conftest.out ; then - ac_cv_lbl_unaligned_fail=yes - else - ac_cv_lbl_unaligned_fail=no - fi - fi - rm -f conftest* core core.conftest - ;; - esac]) - AC_MSG_RESULT($ac_cv_lbl_unaligned_fail) - if test $ac_cv_lbl_unaligned_fail = yes ; then - AC_DEFINE(LBL_ALIGN) - fi -]) - - -dnl -dnl Checks endianess -dnl -dnl usage: -dnl -dnl AC_LIBNET_ENDIAN_CHECK -dnl -dnl results: -dnl -dnl LIBNET_BIG_ENDIAN = 1 or -dnl LIBNET_LIL_ENDIAN = 1 -dnl - -AC_DEFUN(AC_LIBNET_ENDIAN_CHECK, - [AC_MSG_CHECKING(machine endianess) - - cat > conftest.c << EOF -# include -# include - - int main() - { - union - { - short s; - char c[[sizeof(short)]]; - } un; - - un.s = 0x0102; - if (sizeof (short) == 2) - { - if (un.c [[0]] == 1 && un.c [[1]] == 2) - { - printf("B\n"); - } - else - { - if (un.c [[0]] == 2 && un.c [[1]] == 1) - { - printf("L\n"); - } - } - } - else - { - printf("?\n"); - } - return (EXIT_SUCCESS); - } -EOF - ${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS > /dev/null 2>&1 - # Oopz 4.3 BSD doesn't have this. Sorry. - if test ! -x conftest ; then -dnl failed to compile for some reason - ac_cv_libnet_endianess=unknown - else - ./conftest > conftest.out - result=`cat conftest.out` - if test $result = "B"; then - ac_cv_libnet_endianess=big - elif test $result = "L"; then - ac_cv_libnet_endianess=lil - else - ac_cv_libnet_endianess=unknown - fi - fi - rm -f conftest* core core.conftest - - AC_MSG_RESULT($ac_cv_libnet_endianess) - - if test $ac_cv_libnet_endianess = big ; then - AC_DEFINE(LIBNET_BIG_ENDIAN) - LIBNET_CONFIG_DEFINES="$LIBNET_CONFIG_DEFINES -DLIBNET_BIG_ENDIAN" - elif test $ac_cv_libnet_endianess = lil ; then - AC_DEFINE(LIBNET_LIL_ENDIAN) - LIBNET_CONFIG_DEFINES="$LIBNET_CONFIG_DEFINES -DLIBNET_LIL_ENDIAN" - fi - ]) - --- Libnet-1.0.2a/acinclude.m4~configure +++ Libnet-1.0.2a/acinclude.m4 @@ -203,7 +203,7 @@ AC_CACHE_VAL(ac_cv_lbl_unaligned_fail, [case "$target_cpu" in - alpha|hp*|mips|sparc) + alpha|hp*|mips|sparc|arm) ac_cv_lbl_unaligned_fail=yes ;; @@ -278,7 +278,8 @@ dnl AC_DEFUN(AC_LIBNET_ENDIAN_CHECK, - [AC_MSG_CHECKING(machine endianess) + [AC_CACHE_CHECK([machine_endianness], + ac_cv_libnet_endianess, [ cat > conftest.c << EOF # include @@ -331,14 +332,15 @@ fi fi rm -f conftest* core core.conftest - - AC_MSG_RESULT($ac_cv_libnet_endianess) + ]) if test $ac_cv_libnet_endianess = big ; then AC_DEFINE(LIBNET_BIG_ENDIAN) - LIBNET_CONFIG_DEFINES="$LIBNET_CONFIG_DEFINES -DLIBNET_BIG_ENDIAN" + ENDIANESS="LIBNET_BIG_ENDIAN" + LIBNET_CONFIG_DEFINES="$LIBNET_CONFIG_DEFINES -DLIBNET_BIG_ENDIAN" elif test $ac_cv_libnet_endianess = lil ; then AC_DEFINE(LIBNET_LIL_ENDIAN) - LIBNET_CONFIG_DEFINES="$LIBNET_CONFIG_DEFINES -DLIBNET_LIL_ENDIAN" + ENDIANESS="LIBNET_LIL_ENDIAN" + LIBNET_CONFIG_DEFINES="$LIBNET_CONFIG_DEFINES -DLIBNET_LIL_ENDIAN" fi - ]) +]) --- Libnet-1.0.2a/configure~configure +++ Libnet-1.0.2a/configure @@ -1,31 +1,325 @@ #! /bin/sh - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.13 -# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# Generated by GNU Autoconf 2.57. # +# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## -# Defaults: -ac_help= +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi + +# Support unset when possible. +if (FOO=FOO; unset FOO) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +exec 6>&1 + +# +# Initializations. +# ac_default_prefix=/usr/local -# Any additions from configure.in: +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME= +PACKAGE_TARNAME= +PACKAGE_VERSION= +PACKAGE_STRING= +PACKAGE_BUGREPORT= + +ac_unique_file="src/libnet_build_ip.c" ac_default_prefix=/usr -ac_help="$ac_help - --with-pf_packet=[yes,no] override defaults" -ac_help="$ac_help - --with-fast_x86_check=[yes,no] override defaults" +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#if HAVE_SYS_TYPES_H +# include +#endif +#if HAVE_SYS_STAT_H +# include +#endif +#if STDC_HEADERS +# include +# include +#else +# if HAVE_STDLIB_H +# include +# endif +#endif +#if HAVE_STRING_H +# if !STDC_HEADERS && HAVE_MEMORY_H +# include +# endif +# include +#endif +#if HAVE_STRINGS_H +# include +#endif +#if HAVE_INTTYPES_H +# include +#else +# if HAVE_STDINT_H +# include +# endif +#endif +#if HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS LL_INT_TYPE_UC LL_INT_TYPE LIB_PREFIX INC_PREFIX MAN_PREFIX BIN_PREFIX RANLIB AR LN ADDITIONAL_LIBS LIBNET_CONFIG_DEFINES LIBNET_CONFIG_LIBS LIBNET_CONFIG_CFLAGS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA SET_MAKE CPP EGREP LIBOBJS LTLIBOBJS' +ac_subst_files='' # Initialize some variables set by options. +ac_init_help= +ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. -build=NONE -cache_file=./config.cache +cache_file=/dev/null exec_prefix=NONE -host=NONE no_create= -nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE @@ -34,10 +328,15 @@ silent= site= srcdir= -target=NONE verbose= x_includes=NONE x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' @@ -51,17 +350,9 @@ infodir='${prefix}/info' mandir='${prefix}/man' -# Initialize some other variables. -subdirs= -MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 - ac_prev= for ac_option do - # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" @@ -69,59 +360,59 @@ continue fi - case "$ac_option" in - -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) ac_optarg= ;; - esac + ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` # Accept the important Cygnus configure options, so we can diagnose typos. - case "$ac_option" in + case $ac_option in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir="$ac_optarg" ;; + bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) - ac_prev=build ;; + ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build="$ac_optarg" ;; + build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file="$ac_optarg" ;; + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) - datadir="$ac_optarg" ;; + datadir=$ac_optarg ;; -disable-* | --disable-*) - ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - eval "enable_${ac_feature}=no" ;; + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; -enable-* | --enable-*) - ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac - eval "enable_${ac_feature}='$ac_optarg'" ;; + eval "enable_$ac_feature='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ @@ -130,95 +421,47 @@ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) - exec_prefix="$ac_optarg" ;; + exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; - -help | --help | --hel | --he) - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat << EOF -Usage: configure [options] [host] -Options: [defaults in brackets after descriptions] -Configuration: - --cache-file=FILE cache test results in FILE - --help print this message - --no-create do not create output files - --quiet, --silent do not print \`checking...' messages - --version print the version of autoconf that created configure -Directory and file names: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [same as prefix] - --bindir=DIR user executables in DIR [EPREFIX/bin] - --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] - --libexecdir=DIR program executables in DIR [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data in DIR - [PREFIX/share] - --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data in DIR - [PREFIX/com] - --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] - --libdir=DIR object code libraries in DIR [EPREFIX/lib] - --includedir=DIR C header files in DIR [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] - --infodir=DIR info documentation in DIR [PREFIX/info] - --mandir=DIR man documentation in DIR [PREFIX/man] - --srcdir=DIR find the sources in DIR [configure dir or ..] - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM - run sed PROGRAM on installed program names -EOF - cat << EOF -Host type: - --build=BUILD configure for building on BUILD [BUILD=HOST] - --host=HOST configure for HOST [guessed] - --target=TARGET configure for TARGET [TARGET=HOST] -Features and packages: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR -EOF - if test -n "$ac_help"; then - echo "--enable and --with options recognized:$ac_help" - fi - exit 0 ;; + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; -host | --host | --hos | --ho) - ac_prev=host ;; + ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) - host="$ac_optarg" ;; + host_alias=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir="$ac_optarg" ;; + includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir="$ac_optarg" ;; + infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir="$ac_optarg" ;; + libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) - libexecdir="$ac_optarg" ;; + libexecdir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ @@ -227,19 +470,19 @@ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir="$ac_optarg" ;; + localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir="$ac_optarg" ;; + mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) + | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ @@ -253,26 +496,26 @@ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir="$ac_optarg" ;; + oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix="$ac_optarg" ;; + prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix="$ac_optarg" ;; + program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix="$ac_optarg" ;; + program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ @@ -289,7 +532,7 @@ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name="$ac_optarg" ;; + program_transform_name=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) @@ -299,7 +542,7 @@ ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) - sbindir="$ac_optarg" ;; + sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ @@ -310,58 +553,57 @@ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) - sharedstatedir="$ac_optarg" ;; + sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) - site="$ac_optarg" ;; + site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir="$ac_optarg" ;; + srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir="$ac_optarg" ;; + sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target ;; + ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target="$ac_optarg" ;; + target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; - -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.13" - exit 0 ;; + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; -with-* | --with-*) - ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } ac_package=`echo $ac_package| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac - eval "with_${ac_package}='$ac_optarg'" ;; + eval "with_$ac_package='$ac_optarg'" ;; -without-* | --without-*) - ac_package=`echo $ac_option|sed -e 's/-*without-//'` + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - eval "with_${ac_package}=no" ;; + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; --x) # Obsolete; use --with-x. @@ -372,99 +614,110 @@ ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes="$ac_optarg" ;; + x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries="$ac_optarg" ;; + x_libraries=$ac_optarg ;; - -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + *) - if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then - echo "configure: warning: $ac_option: invalid host type" 1>&2 - fi - if test "x$nonopt" != xNONE; then - { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } - fi - nonopt="$ac_option" + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then - { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } -fi - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 6 checking for... messages and results -# 5 compiler messages saved in config.log -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } fi -exec 5>./config.log -echo "\ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -" 1>&5 +# Be sure to have absolute paths. +for ac_var in exec_prefix prefix +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell metacharacters. -ac_configure_args= -for ac_arg +# Be sure to have absolute paths. +for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir do - case "$ac_arg" in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ac_configure_args="$ac_configure_args '$ac_arg'" ;; - *) ac_configure_args="$ac_configure_args $ac_arg" ;; + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; esac done -# NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo > confdefs.h +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null -# A filename unique to this package, relative to the directory that -# configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=src/libnet_build_ip.c # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. @@ -474,13 +727,433 @@ fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then - { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } else - { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } fi fi -srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } +srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +ac_env_build_alias_set=${build_alias+set} +ac_env_build_alias_value=$build_alias +ac_cv_env_build_alias_set=${build_alias+set} +ac_cv_env_build_alias_value=$build_alias +ac_env_host_alias_set=${host_alias+set} +ac_env_host_alias_value=$host_alias +ac_cv_env_host_alias_set=${host_alias+set} +ac_cv_env_host_alias_value=$host_alias +ac_env_target_alias_set=${target_alias+set} +ac_env_target_alias_value=$target_alias +ac_cv_env_target_alias_set=${target_alias+set} +ac_cv_env_target_alias_value=$target_alias +ac_env_CC_set=${CC+set} +ac_env_CC_value=$CC +ac_cv_env_CC_set=${CC+set} +ac_cv_env_CC_value=$CC +ac_env_CFLAGS_set=${CFLAGS+set} +ac_env_CFLAGS_value=$CFLAGS +ac_cv_env_CFLAGS_set=${CFLAGS+set} +ac_cv_env_CFLAGS_value=$CFLAGS +ac_env_LDFLAGS_set=${LDFLAGS+set} +ac_env_LDFLAGS_value=$LDFLAGS +ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +ac_cv_env_LDFLAGS_value=$LDFLAGS +ac_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_env_CPPFLAGS_value=$CPPFLAGS +ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_cv_env_CPPFLAGS_value=$CPPFLAGS +ac_env_CPP_set=${CPP+set} +ac_env_CPP_value=$CPP +ac_cv_env_CPP_set=${CPP+set} +ac_cv_env_CPP_value=$CPP + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures this package to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +_ACEOF + + cat <<_ACEOF +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] +_ACEOF + + cat <<\_ACEOF + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + --target=TARGET configure for building compilers for TARGET [HOST] +_ACEOF +fi + +if test -n "$ac_init_help"; then + + cat <<\_ACEOF + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-pf_packet=yes,no override defaults + --with-fast_x86_check=yes,no override defaults + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have + headers in a nonstandard directory + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +_ACEOF +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac +# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be +# absolute. +ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` +ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` +ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd $ac_popdir + done +fi + +test -n "$ac_init_help" && exit 0 +if $ac_init_version; then + cat <<\_ACEOF + +Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 +Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit 0 +fi +exec 5>config.log +cat >&5 <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by $as_me, which was +generated by GNU Autoconf 2.57. Invocation command line was + + $ $0 $@ + +_ACEOF +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_sep= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +{ + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core core.* *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo >confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then @@ -491,44 +1164,109 @@ fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then - echo "loading site script $ac_site_file" + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then - echo "loading cache $cache_file" - . $cache_file + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi else - echo "creating cache $cache_file" - > $cache_file + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } fi ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + + + + + -ac_exeext= -ac_objext=o -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi VER=`cat VERSION` -echo "$ac_t""Beginning autoconfiguration process for libnet-$VER..." 1>&6 +echo "$as_me:$LINENO: result: Beginning autoconfiguration process for libnet-$VER..." >&5 +echo "${ECHO_T}Beginning autoconfiguration process for libnet-$VER..." >&6 @@ -554,318 +1292,746 @@ ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break fi done if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} + { (exit 1); exit 1; }; } fi -ac_config_guess=$ac_aux_dir/config.guess -ac_config_sub=$ac_aux_dir/config.sub -ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. - - -# Do some error checking and defaulting for the host and target type. -# The inputs are: -# configure --host=HOST --target=TARGET --build=BUILD NONOPT -# -# The rules are: -# 1. You are not allowed to specify --host, --target, and nonopt at the -# same time. -# 2. Host defaults to nonopt. -# 3. If nonopt is not specified, then host defaults to the current host, -# as determined by config.guess. -# 4. Target and build default to nonopt. -# 5. If nonopt is not specified, then target and build default to host. - -# The aliases save the names the user supplied, while $host etc. -# will get canonicalized. -case $host---$target---$nonopt in -NONE---*---* | *---NONE---* | *---*---NONE) ;; -*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; -esac - +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. # Make sure we can run config.sub. -if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : -else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } -fi +$ac_config_sub sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +echo "$as_me: error: cannot run $ac_config_sub" >&2;} + { (exit 1); exit 1; }; } -echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:595: checking host system type" >&5 +echo "$as_me:$LINENO: checking build system type" >&5 +echo $ECHO_N "checking build system type... $ECHO_C" >&6 +if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_build_alias=$build_alias +test -z "$ac_cv_build_alias" && + ac_cv_build_alias=`$ac_config_guess` +test -z "$ac_cv_build_alias" && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} + { (exit 1); exit 1; }; } -host_alias=$host -case "$host_alias" in -NONE) - case $nonopt in - NONE) - if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : - else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } - fi ;; - *) host_alias=$nonopt ;; - esac ;; -esac +fi +echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +echo "${ECHO_T}$ac_cv_build" >&6 +build=$ac_cv_build +build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$host" 1>&6 -echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:616: checking target system type" >&5 +echo "$as_me:$LINENO: checking host system type" >&5 +echo $ECHO_N "checking host system type... $ECHO_C" >&6 +if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_host_alias=$host_alias +test -z "$ac_cv_host_alias" && + ac_cv_host_alias=$ac_cv_build_alias +ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} + { (exit 1); exit 1; }; } -target_alias=$target -case "$target_alias" in -NONE) - case $nonopt in - NONE) target_alias=$host_alias ;; - *) target_alias=$nonopt ;; - esac ;; -esac +fi +echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +echo "${ECHO_T}$ac_cv_host" >&6 +host=$ac_cv_host +host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` -target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$target" 1>&6 -echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:634: checking build system type" >&5 +echo "$as_me:$LINENO: checking target system type" >&5 +echo $ECHO_N "checking target system type... $ECHO_C" >&6 +if test "${ac_cv_target+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_target_alias=$target_alias +test "x$ac_cv_target_alias" = "x" && + ac_cv_target_alias=$ac_cv_host_alias +ac_cv_target=`$ac_config_sub $ac_cv_target_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;} + { (exit 1); exit 1; }; } -build_alias=$build -case "$build_alias" in -NONE) - case $nonopt in - NONE) build_alias=$host_alias ;; - *) build_alias=$nonopt ;; - esac ;; -esac +fi +echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +echo "${ECHO_T}$ac_cv_target" >&6 +target=$ac_cv_target +target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` -build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$build" 1>&6 -test "$host_alias" != "$target_alias" && +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +test -n "$target_alias" && test "$program_prefix$program_suffix$program_transform_name" = \ NONENONEs,x,x, && program_prefix=${target_alias}- - if test "$prefix" = "NONE"; then prefix="/usr" fi -# Extract the first word of "gcc", so it can be a program name with args. +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:665: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi fi -CC="$ac_cv_prog_CC" +CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" fi +fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:695: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift - if test $# -gt 0; then + if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi -CC="$ac_cv_prog_CC" +CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi - if test -z "$CC"; then - case "`uname -s`" in - *win32* | *WIN32*) - # Extract the first word of "cl", so it can be a program name with args. -set dummy cl; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:746: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="cl" - break - fi - done - IFS="$ac_save_ifs" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi fi -CC="$ac_cv_prog_CC" +CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi - ;; - esac + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:778: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + test -n "$ac_ct_CC" && break +done -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross + CC=$ac_ct_CC +fi -cat > conftest.$ac_ext << EOF +fi -#line 789 "configure" -#include "confdefs.h" -main(){return(0);} -EOF -if { (eval echo configure:794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +echo "$as_me:$LINENO: checking for C compiler default output" >&5 +echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 +ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 + (eval $ac_link_default) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Find the output, starting from the most likely. This scheme is +# not robust to junk in `.', hence go to wildcards (a.*) only as a last +# resort. + +# Be careful to initialize this variable, since it used to be cached. +# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +ac_cv_exeext= +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } +fi + +ac_exeext=$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6 + +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no else - ac_cv_prog_cc_cross=yes + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no fi -rm -fr conftest* -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross +echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +rm -f a.out a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6 + +echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + export ac_cv_exeext + break;; + * ) break;; + esac +done +else + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:820: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:825: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +rm -f conftest$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6 + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done else - ac_cv_prog_gcc=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext fi +echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6 +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 +int +main () +{ +#ifndef __GNUC__ + choke me +#endif -if test $ac_cv_prog_gcc = yes; then - GCC=yes + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes else - GCC= + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no fi +rm -f conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu -ac_test_CFLAGS="${CFLAGS+set}" -ac_save_CFLAGS="$CFLAGS" -CFLAGS= -echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:853: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_prog_cc_g=yes else - ac_cv_prog_cc_g=no -fi -rm -f conftest* + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_prog_cc_g=no fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" + CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" @@ -879,90 +2045,332 @@ CFLAGS= fi fi - - -echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:886: checking for working const" >&5 -if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; } -{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ - typedef const int *iptr; - iptr p = 0; - ++p; +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; } -{ /* AIX XL C 1.02.0.0 rejects this saying - "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; }; - struct s *b; b->j = 5; +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; } -{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + ''\ + '#include ' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; } +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -; return 0; } -EOF -if { (eval echo configure:940: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_c_const=yes +continue +fi +rm -f conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_c_const=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi +rm -f conftest.$ac_objext conftest.$ac_ext +done rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h fi -echo "$ac_t""$ac_cv_c_const" 1>&6 +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 +echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 +if test "${ac_cv_c_const+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +/* FIXME: Include the comments suggested by Paul. */ +#ifndef __cplusplus + /* Ultrix mips cc rejects this. */ + typedef int charset[2]; + const charset x; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *ccp; + char **p; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + ccp = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++ccp; + p = (char**) ccp; + ccp = (char const *const *) p; + { /* SCO 3.2v4 cc rejects this. */ + char *t; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; }; + struct s *b; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + } +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_const=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_c_const=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 +echo "${ECHO_T}$ac_cv_c_const" >&6 if test $ac_cv_c_const = no; then - cat >> confdefs.h <<\EOF -#define const -EOF + +cat >>confdefs.h <<\_ACEOF +#define const +_ACEOF fi -if test $ac_cv_prog_gcc = yes; then +if test $ac_cv_c_compiler_gnu = yes; then CCOPTS='-O2 -funroll-loops -fomit-frame-pointer -Wall' CFLAGS="$CCOPTS" fi + # Check whether --with-pf_packet or --without-pf_packet was given. if test "${with_pf_packet+set}" = set; then withval="$with_pf_packet" @@ -970,19 +2378,18 @@ with_pf_packet=yes else with_pf_packet=no -fi +fi; # Check whether --with-fast_x86_check or --without-fast_x86_check was given. if test "${with_fast_x86_check+set}" = set; then withval="$with_fast_x86_check" \ - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define LIBNET_FAST_X86_CHECK 1 -EOF - -fi +_ACEOF +fi; # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or @@ -991,330 +2398,417 @@ # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. -echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1000: checking for a BSD compatible install" >&5 +echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 if test -z "$INSTALL"; then -if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" - for ac_dir in $PATH; do - # Account for people who put trailing slashes in PATH elements. - case "$ac_dir/" in - /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - if test -f $ac_dir/$ac_prog; then - if test $ac_prog = install && - grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 - fi - fi + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi done - ;; - esac - done - IFS="$ac_save_IFS" + done + ;; +esac +done + fi if test "${ac_cv_path_install+set}" = set; then - INSTALL="$ac_cv_path_install" + INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. - INSTALL="$ac_install_sh" + INSTALL=$ac_install_sh fi fi -echo "$ac_t""$INSTALL" 1>&6 +echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:1053: checking whether ${MAKE-make} sets \${MAKE}" >&5 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftestmake <<\EOF + cat >conftest.make <<\_ACEOF all: - @echo 'ac_maketemp="${MAKE}"' -EOF + @echo 'ac_maketemp="$(MAKE)"' +_ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` +eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi -rm -f conftestmake +rm -f conftest.make fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$ac_t""yes" 1>&6 + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 SET_MAKE= else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 SET_MAKE="MAKE=${MAKE-make}" fi for ac_prog in ranlib do -# Extract the first word of "$ac_prog", so it can be a program name with args. + # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1084: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi fi -RANLIB="$ac_cv_prog_RANLIB" +RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then - echo "$ac_t""$RANLIB" 1>&6 + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -test -n "$RANLIB" && break + test -n "$RANLIB" && break done test -n "$RANLIB" || RANLIB="@true" for ac_prog in ar do -# Extract the first word of "$ac_prog", so it can be a program name with args. + # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1119: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_AR="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi fi -AR="$ac_cv_prog_AR" +AR=$ac_cv_prog_AR if test -n "$AR"; then - echo "$ac_t""$AR" 1>&6 + echo "$as_me:$LINENO: result: $AR" >&5 +echo "${ECHO_T}$AR" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -test -n "$AR" && break + test -n "$AR" && break done test -n "$AR" || AR="@true" for ac_prog in ln do -# Extract the first word of "$ac_prog", so it can be a program name with args. + # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1154: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_LN'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_LN+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$LN"; then ac_cv_prog_LN="$LN" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_LN="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LN="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi fi -LN="$ac_cv_prog_LN" +LN=$ac_cv_prog_LN if test -n "$LN"; then - echo "$ac_t""$LN" 1>&6 + echo "$as_me:$LINENO: result: $LN" >&5 +echo "${ECHO_T}$LN" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -test -n "$LN" && break + test -n "$LN" && break done test -n "$LN" || LN="@true" + for ac_func in strerror do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1188: checking for $ac_func" >&5 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif /* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func(); - -int main() { - + builtin and then its argument prototype would still apply. */ +char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else -$ac_func(); +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} #endif -; return 0; } -EOF -if { (eval echo configure:1216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" fi -rm -f conftest* +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <&6 fi done -echo $ac_n "checking for pcap_open_live in -lpcap""... $ac_c" 1>&6 -echo "configure:1242: checking for pcap_open_live in -lpcap" >&5 -ac_lib_var=`echo pcap'_'pcap_open_live | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for pcap_open_live in -lpcap" >&5 +echo $ECHO_N "checking for pcap_open_live in -lpcap... $ECHO_C" >&6 +if test "${ac_cv_lib_pcap_pcap_open_live+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_save_LIBS="$LIBS" + ac_check_lib_save_LIBS=$LIBS LIBS="-lpcap $LIBS" -cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + /* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char pcap_open_live(); - -int main() { -pcap_open_live() -; return 0; } -EOF -if { (eval echo configure:1261: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" + builtin and then its argument prototype would still apply. */ +char pcap_open_live (); +int +main () +{ +pcap_open_live (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_pcap_pcap_open_live=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_lib_pcap_pcap_open_live=no fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - cat >> confdefs.h <<\EOF +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_pcap_pcap_open_live" >&5 +echo "${ECHO_T}$ac_cv_lib_pcap_pcap_open_live" >&6 +if test $ac_cv_lib_pcap_pcap_open_live = yes; then + cat >>confdefs.h <<\_ACEOF #define HAVE_LIB_PCAP 1 -EOF +_ACEOF -else - echo "$ac_t""no" 1>&6 fi -echo $ac_n "checking low-level packet interface type""... $ac_c" 1>&6 -echo "configure:1286: checking low-level packet interface type" >&5 +echo "$as_me:$LINENO: checking low-level packet interface type" >&5 +echo $ECHO_N "checking low-level packet interface type... $ECHO_C" >&6 if test -r /dev/bpf0 ; then LL_INT_TYPE=bpf - echo "$ac_t""found bpf" 1>&6 + echo "$as_me:$LINENO: result: found bpf" >&5 +echo "${ECHO_T}found bpf" >&6 elif test -r /usr/include/net/pfilt.h ; then LL_INT_TYPE=pf - echo "$ac_t""found pf" 1>&6 + echo "$as_me:$LINENO: result: found pf" >&5 +echo "${ECHO_T}found pf" >&6 elif test -r /dev/nit ; then LL_INT_TYPE=snit - echo "$ac_t""found snit" 1>&6 + echo "$as_me:$LINENO: result: found snit" >&5 +echo "${ECHO_T}found snit" >&6 elif test -r /usr/include/sys/net/nit.h ; then LL_INT_TYPE=nit - echo "$ac_t""found nit" 1>&6 + echo "$as_me:$LINENO: result: found nit" >&5 +echo "${ECHO_T}found nit" >&6 elif test -r /usr/include/net/raw.h ; then LL_INT_TYPE=snoop - echo "$ac_t""found snoop" 1>&6 + echo "$as_me:$LINENO: result: found snoop" >&5 +echo "${ECHO_T}found snoop" >&6 elif test -r /usr/include/sys/dlpi.h ; then LL_INT_TYPE=dlpi - echo "$ac_t""found dlpi" 1>&6 - cat >> confdefs.h <<\EOF + echo "$as_me:$LINENO: result: found dlpi" >&5 +echo "${ECHO_T}found dlpi" >&6 + cat >>confdefs.h <<\_ACEOF #define HAVE_DLPI 1 -EOF +_ACEOF elif test -r /usr/include/linux/socket.h ; then LL_INT_TYPE=sockpacket - echo "$ac_t""found SOCK_PACKET" 1>&6 + echo "$as_me:$LINENO: result: found SOCK_PACKET" >&5 +echo "${ECHO_T}found SOCK_PACKET" >&6 if test $with_pf_packet = yes; then - - echo $ac_n "checking for PF_PACKET""... $ac_c" 1>&6 -echo "configure:1316: checking for PF_PACKET" >&5 - if eval "test \"`echo '$''{'ac_libnet_have_pf_packet'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + + echo "$as_me:$LINENO: checking for PF_PACKET" >&5 +echo $ECHO_N "checking for PF_PACKET... $ECHO_C" >&6 + if test "${ac_libnet_have_pf_packet+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else case "$target_os" in @@ -1397,17 +2891,19 @@ fi if test $ac_libnet_have_pf_packet = choked; then - echo "$ac_t""test program choked... assuming no" 1>&6 + echo "$as_me:$LINENO: result: test program choked... assuming no" >&5 +echo "${ECHO_T}test program choked... assuming no" >&6 elif test $ac_libnet_have_pf_packet = yes; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define HAVE_PF_PACKET 1 -EOF +_ACEOF LIBNET_CONFIG_DEFINES="$LIBNET_CONFIG_DEFINES -DHAVE_PF_PACKET" fi if test $ac_libnet_have_pf_packet != choked; then - echo "$ac_t""$ac_libnet_have_pf_packet" 1>&6 + echo "$as_me:$LINENO: result: $ac_libnet_have_pf_packet" >&5 +echo "${ECHO_T}$ac_libnet_have_pf_packet" >&6 fi rm -f pf_packet-test* core core.pf_packet-test ;; @@ -1418,17 +2914,22 @@ fi elif test -c /dev/bpf0 ; then # check again in case not readable LL_INT_TYPE=bpf - echo "$ac_t""found bpf" 1>&6 + echo "$as_me:$LINENO: result: found bpf" >&5 +echo "${ECHO_T}found bpf" >&6 elif test -c /dev/enet ; then # check again in case not readable LL_INT_TYPE=enet - echo "$ac_t""found enet" 1>&6 + echo "$as_me:$LINENO: result: found enet" >&5 +echo "${ECHO_T}found enet" >&6 elif test -c /dev/nit ; then # check again in case not readable LL_INT_TYPE=snit - echo "$ac_t""found snit" 1>&6 + echo "$as_me:$LINENO: result: found snit" >&5 +echo "${ECHO_T}found snit" >&6 else LL_INT_TYPE=null - echo "configure: warning: could not find a low level packet interface" 1>&2 - echo "configure: warning: low level packet creation API will not be added to the library" 1>&2 + { echo "$as_me:$LINENO: WARNING: could not find a low level packet interface" >&5 +echo "$as_me: WARNING: could not find a low level packet interface" >&2;} + { echo "$as_me:$LINENO: WARNING: low level packet creation API will not be added to the library" >&5 +echo "$as_me: WARNING: low level packet creation API will not be added to the library" >&2;} fi LL_INT_TYPE_UC=`echo $LL_INT_TYPE | tr a-z A-Z` @@ -1437,138 +2938,633 @@ case "$target_os" in *linux*) - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define _BSD_SOURCE 1 -EOF +_ACEOF - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define __BSD_SOURCE 1 -EOF +_ACEOF - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define __FAVOR_BSD 1 -EOF +_ACEOF LIBNET_CONFIG_DEFINES="-D_BSD_SOURCE -D__BSD_SOURCE -D__FAVOR_BSD" - echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1455: checking how to run the C preprocessor" >&5 + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then -if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - # This must be in double quotes, not single quotes, because CPP may get - # substituted into the Makefile and "${CC-cc}" will confuse make. - CPP="${CC-cc} -E" + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1476: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then : else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP="${CC-cc} -E -traditional-cpp" - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1493: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6 +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then : else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP="${CC-cc} -nologo -E" - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1510: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP=/lib/cpp + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } fi -rm -f conftest* + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep + + +echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_header_stdc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no fi rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no fi rm -f conftest* - ac_cv_prog_CPP="$CPP" + fi - CPP="$ac_cv_prog_CPP" + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : else - ac_cv_prog_CPP="$CPP" + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no fi -echo "$ac_t""$CPP" 1>&6 +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6 +if test $ac_cv_header_stdc = yes; then -for ac_hdr in net/ethernet.h +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1538: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1548: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_Header=no" fi -rm -f conftest* +rm -f conftest.$ac_objext conftest.$ac_ext fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + +for ac_header in net/ethernet.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF \ LIBNET_CONFIG_DEFINES="$LIBNET_CONFIG_DEFINES -DHAVE_NET_ETHERNET_H" -else - echo "$ac_t""no" 1>&6 fi + done MAN_PREFIX="$prefix/man/man3/" @@ -1578,17 +3574,17 @@ ;; *freebsd*) - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define LIBNET_BSDISH_OS 1 -EOF +_ACEOF - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define LIBNET_BSD_BYTE_SWAP 1 -EOF +_ACEOF - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define HAVE_SOCKADDR_SA_LEN 1 -EOF +_ACEOF LIBNET_CONFIG_DEFINES="-DLIBNET_BSDISH_OS -DLIBNET_BSD_BYTE_SWAP \ -DHAVE_SOCKADDR_SA_LEN" @@ -1596,19 +3592,21 @@ LIB_PREFIX="$prefix/lib/aout" INC_PREFIX="$prefix/include/" BIN_PREFIX="$prefix/bin/" - echo "$ac_t""Note: support/bpf-lkm/etherspoof contains the lkm source \ -required to spoof ethernet frames" 1>&6 + echo "$as_me:$LINENO: result: Note: support/bpf-lkm/etherspoof contains the lkm source \ +required to spoof ethernet frames" >&5 +echo "${ECHO_T}Note: support/bpf-lkm/etherspoof contains the lkm source \ +required to spoof ethernet frames" >&6 ln -sf FreeBSD support/bpf-lkm/etherspoof ;; *netbsd*) - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define LIBNET_BSDISH_OS 1 -EOF +_ACEOF - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define LIBNET_BSD_BYTE_SWAP 1 -EOF +_ACEOF LIBNET_CONFIG_DEFINES="-DLIBNET_BSDISH_OS -DLIBNET_BSD_BYTE_SWAP" MAN_PREFIX="$prefix/man/man3/" @@ -1618,32 +3616,34 @@ ;; *openbsd*) - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define LIBNET_BSDISH_OS 1 -EOF +_ACEOF - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define HAVE_SOCKADDR_SA_LEN 1 -EOF +_ACEOF LIBNET_CONFIG_DEFINES="-DLIBNET_BSDISH_OS" MAN_PREFIX="$prefix/man/man3/" LIB_PREFIX="$prefix/lib/" INC_PREFIX="$prefix/include/" BIN_PREFIX="$prefix/bin/" - echo "$ac_t""Note: support/bpf-lkm/etherspoof contains the lkm required \ -to spoof ethernet frames" 1>&6 + echo "$as_me:$LINENO: result: Note: support/bpf-lkm/etherspoof contains the lkm required \ +to spoof ethernet frames" >&5 +echo "${ECHO_T}Note: support/bpf-lkm/etherspoof contains the lkm required \ +to spoof ethernet frames" >&6 ln -sf OpenBSD support/bpf-lkm/etherspoof ;; *bsdi*) - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define LIBNET_BSDISH_OS 1 -EOF +_ACEOF - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define LIBNET_BSD_BYTE_SWAP 1 -EOF +_ACEOF LIBNET_CONFIG_DEFINES="-DLIBNET_BSDISH_OS -DLIBNET_BSD_BYTE_SWAP" MAN_PREFIX="$prefix/man/man3/" @@ -1653,181 +3653,328 @@ ;; *solaris*) - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define HAVE_SOLARIS 1 -EOF +_ACEOF - for ac_hdr in sys/bufmod.h sys/dlpi_ext.h + + +for ac_header in sys/bufmod.h sys/dlpi_ext.h do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1665: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1675: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no fi -rm -f conftest* +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <&6 + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + done - echo $ac_n "checking for /dev/dlpi device""... $ac_c" 1>&6 -echo "configure:1702: checking for /dev/dlpi device" >&5 + echo "$as_me:$LINENO: checking for /dev/dlpi device" >&5 +echo $ECHO_N "checking for /dev/dlpi device... $ECHO_C" >&6 if test -c /dev/dlpi; then - echo "$ac_t""yes" 1>&6 - cat >> confdefs.h <<\EOF + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + cat >>confdefs.h <<\_ACEOF #define HAVE_DEV_DLPI 1 -EOF +_ACEOF else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 dir="/dev/dlpi" - echo $ac_n "checking for $dir directory""... $ac_c" 1>&6 -echo "configure:1713: checking for $dir directory" >&5 + echo "$as_me:$LINENO: checking for $dir directory" >&5 +echo $ECHO_N "checking for $dir directory... $ECHO_C" >&6 if test -d $dir ; then - echo "$ac_t""yes" 1>&6 - cat >> confdefs.h <&5 +echo "${ECHO_T}yes" >&6 + cat >>confdefs.h <<_ACEOF #define DLPI_DEV_PREFIX "$dir" -EOF +_ACEOF else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi fi - echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6 -echo "configure:1725: checking for socket in -lsocket" >&5 -ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + +echo "$as_me:$LINENO: checking for socket in -lsocket" >&5 +echo $ECHO_N "checking for socket in -lsocket... $ECHO_C" >&6 +if test "${ac_cv_lib_socket_socket+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_save_LIBS="$LIBS" + ac_check_lib_save_LIBS=$LIBS LIBS="-lsocket $LIBS" -cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + /* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char socket(); - -int main() { -socket() -; return 0; } -EOF -if { (eval echo configure:1744: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" + builtin and then its argument prototype would still apply. */ +char socket (); +int +main () +{ +socket (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_socket_socket=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_lib_socket_socket=no fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \ - -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` - cat >> confdefs.h <&5 +echo "${ECHO_T}$ac_cv_lib_socket_socket" >&6 +if test $ac_cv_lib_socket_socket = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBSOCKET 1 +_ACEOF LIBS="-lsocket $LIBS" else - echo "$ac_t""no" 1>&6 -{ echo "configure: error: libsocket not found." 1>&2; exit 1; } + { { echo "$as_me:$LINENO: error: libsocket not found." >&5 +echo "$as_me: error: libsocket not found." >&2;} + { (exit 1); exit 1; }; } fi - echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:1773: checking for gethostbyname in -lnsl" >&5 -ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + +echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 +echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 +if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_save_LIBS="$LIBS" + ac_check_lib_save_LIBS=$LIBS LIBS="-lnsl $LIBS" -cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + /* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char gethostbyname(); - -int main() { -gethostbyname() -; return 0; } -EOF -if { (eval echo configure:1792: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" + builtin and then its argument prototype would still apply. */ +char gethostbyname (); +int +main () +{ +gethostbyname (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_nsl_gethostbyname=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_lib_nsl_gethostbyname=no fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_lib=HAVE_LIB`echo nsl | sed -e 's/[^a-zA-Z0-9_]/_/g' \ - -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` - cat >> confdefs.h <&5 +echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 +if test $ac_cv_lib_nsl_gethostbyname = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBNSL 1 +_ACEOF LIBS="-lnsl $LIBS" else - echo "$ac_t""no" 1>&6 -{ echo "configure: error: libnsl not found." 1>&2; exit 1; } + { { echo "$as_me:$LINENO: error: libnsl not found." >&5 +echo "$as_me: error: libnsl not found." >&2;} + { (exit 1); exit 1; }; } fi case "`uname -r`" in 5.4) - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define STUPID_SOLARIS_CHECKSUM_BUG 1 -EOF +_ACEOF ;; 5.5*) - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define STUPID_SOLARIS_CHECKSUM_BUG 1 -EOF +_ACEOF ;; @@ -1842,73 +3989,103 @@ ;; *) - echo "configure: warning: apparently your OS is not officially supported yet" 1>&2 - echo "configure: warning: this may not work" 1>&2 - echo "$ac_t""you'll have to edit the makefile by hand" 1>&6 - echo "$ac_t""please send diffs to mike@infonexus.com" 1>&6 + { echo "$as_me:$LINENO: WARNING: apparently your OS is not officially supported yet" >&5 +echo "$as_me: WARNING: apparently your OS is not officially supported yet" >&2;} + { echo "$as_me:$LINENO: WARNING: this may not work" >&5 +echo "$as_me: WARNING: this may not work" >&2;} + echo "$as_me:$LINENO: result: you'll have to edit the makefile by hand" >&5 +echo "${ECHO_T}you'll have to edit the makefile by hand" >&6 + echo "$as_me:$LINENO: result: please send diffs to mike@infonexus.com" >&5 +echo "${ECHO_T}please send diffs to mike@infonexus.com" >&6 ;; esac - echo $ac_n "checking for libnet_build_ip in -lnet""... $ac_c" 1>&6 -echo "configure:1856: checking for libnet_build_ip in -lnet" >&5 -ac_lib_var=`echo net'_'libnet_build_ip | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + echo "$as_me:$LINENO: checking for libnet_build_ip in -lnet" >&5 +echo $ECHO_N "checking for libnet_build_ip in -lnet... $ECHO_C" >&6 +if test "${ac_cv_lib_net_libnet_build_ip+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_save_LIBS="$LIBS" + ac_check_lib_save_LIBS=$LIBS LIBS="-lnet $LIBS" -cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + /* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char libnet_build_ip(); - -int main() { -libnet_build_ip() -; return 0; } -EOF -if { (eval echo configure:1875: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" + builtin and then its argument prototype would still apply. */ +char libnet_build_ip (); +int +main () +{ +libnet_build_ip (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_net_libnet_build_ip=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_lib_net_libnet_build_ip=no fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - echo $ac_n "checking version""... $ac_c" 1>&6 -echo "configure:1891: checking version" >&5 \ +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_net_libnet_build_ip" >&5 +echo "${ECHO_T}$ac_cv_lib_net_libnet_build_ip" >&6 +if test $ac_cv_lib_net_libnet_build_ip = yes; then + echo "$as_me:$LINENO: checking version" >&5 +echo $ECHO_N "checking version... $ECHO_C" >&6 \ if [ ! -f $LIB_PREFIX/libnet.a ] ; then - echo "$ac_t""$LIB_PREFIX/libnet.a doesn't exist" 1>&6 - echo "$ac_t""previous libnet install lives elsewhere" 1>&6 + echo "$as_me:$LINENO: result: $LIB_PREFIX/libnet.a doesn't exist" >&5 +echo "${ECHO_T}$LIB_PREFIX/libnet.a doesn't exist" >&6 + echo "$as_me:$LINENO: result: previous libnet install lives elsewhere" >&5 +echo "${ECHO_T}previous libnet install lives elsewhere" >&6 else __LIBNET_VERSION=`strings $LIB_PREFIX/libnet.a | grep "libnet version"\ | cut -f3 -d" "`;\ if test -z "$__LIBNET_VERSION"; then - echo "$ac_t""<0.8" 1>&6 + echo "$as_me:$LINENO: result: <0.8" >&5 +echo "${ECHO_T}<0.8" >&6 else - echo "$ac_t""$__LIBNET_VERSION" 1>&6 + echo "$as_me:$LINENO: result: $__LIBNET_VERSION" >&5 +echo "${ECHO_T}$__LIBNET_VERSION" >&6 fi fi\ - -else - echo "$ac_t""no" 1>&6 + fi -echo $ac_n "checking machine endianess""... $ac_c" 1>&6 -echo "configure:1912: checking machine endianess" >&5 +echo "$as_me:$LINENO: checking machine_endianness" >&5 +echo $ECHO_N "checking machine_endianness... $ECHO_C" >&6 +if test "${ac_cv_libnet_endianess+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat > conftest.c << EOF # include @@ -1957,30 +4134,34 @@ ac_cv_libnet_endianess=lil else ac_cv_libnet_endianess=unknown - fi + fi fi rm -f conftest* core core.conftest - echo "$ac_t""$ac_cv_libnet_endianess" 1>&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_libnet_endianess" >&5 +echo "${ECHO_T}$ac_cv_libnet_endianess" >&6 if test $ac_cv_libnet_endianess = big ; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define LIBNET_BIG_ENDIAN 1 -EOF +_ACEOF - LIBNET_CONFIG_DEFINES="$LIBNET_CONFIG_DEFINES -DLIBNET_BIG_ENDIAN" + ENDIANESS="LIBNET_BIG_ENDIAN" + LIBNET_CONFIG_DEFINES="$LIBNET_CONFIG_DEFINES -DLIBNET_BIG_ENDIAN" elif test $ac_cv_libnet_endianess = lil ; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define LIBNET_LIL_ENDIAN 1 -EOF +_ACEOF - LIBNET_CONFIG_DEFINES="$LIBNET_CONFIG_DEFINES -DLIBNET_LIL_ENDIAN" + ENDIANESS="LIBNET_LIL_ENDIAN" + LIBNET_CONFIG_DEFINES="$LIBNET_CONFIG_DEFINES -DLIBNET_LIL_ENDIAN" fi - -echo $ac_n "checking if unaligned accesses fail""... $ac_c" 1>&6 -echo "configure:1982: checking if unaligned accesses fail" >&5 - if eval "test \"`echo '$''{'ac_cv_lbl_unaligned_fail'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + +echo "$as_me:$LINENO: checking if unaligned accesses fail" >&5 +echo $ECHO_N "checking if unaligned accesses fail... $ECHO_C" >&6 + if test "${ac_cv_lbl_unaligned_fail+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else case "$target_cpu" in @@ -2039,446 +4220,1343 @@ esac fi - echo "$ac_t""$ac_cv_lbl_unaligned_fail" 1>&6 + echo "$as_me:$LINENO: result: $ac_cv_lbl_unaligned_fail" >&5 +echo "${ECHO_T}$ac_cv_lbl_unaligned_fail" >&6 if test $ac_cv_lbl_unaligned_fail = yes ; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define LBL_ALIGN 1 -EOF +_ACEOF fi -for ac_hdr in sys/sockio.h + +for ac_header in sys/sockio.h do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2056: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2066: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no fi -rm -f conftest* +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <&6 + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=$ac_header_preproc" fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + done + ac_config_headers="$ac_config_headers include/config.h" -trap '' 1 2 15 -cat > confcache <<\EOF + ac_config_files="$ac_config_files Makefile test/Makefile test/TCP/Makefile test/Ethernet/Makefile test/UDP/Makefile test/ICMP/Makefile test/Random/Makefile test/OSPF/Makefile util/Makefile util/Get-mac/Makefile example/Makefile libnet-config" + ac_config_commands="$ac_config_commands default" +cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. # -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. # -EOF +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -# Any assignment to VPATH causes Sun make to only execute -# the first set of double-colon rules, so remove it if not needed. -# If there is a colon in the path, we need to keep it. +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^\([^=]*=[ ]*\):*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' fi -trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 - DEFS=-DHAVE_CONFIG_H -# Without the "./", some shells look in PATH for config.status. -: ${CONFIG_STATUS=./config.status} +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs -echo creating $CONFIG_STATUS -rm -f $CONFIG_STATUS -cat > $CONFIG_STATUS <&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. # Run this file to recreate the current configuration. -# This directory was configured as follows, -# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# -# $0 $ac_configure_args -# # Compiler output produced by configure, useful for debugging -# configure, is in ./config.log if it exists. +# configure, is in config.log if it exists. -ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" -for ac_option +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi + +# Support unset when possible. +if (FOO=FOO; unset FOO) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME do - case "\$ac_option" in - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" - exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; - -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.13" - exit 0 ;; - -help | --help | --hel | --he | --h) - echo "\$ac_cs_usage"; exit 0 ;; - *) echo "\$ac_cs_usage"; exit 1 ;; - esac + if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi done -ac_given_srcdir=$srcdir -ac_given_INSTALL="$INSTALL" +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi -trap 'rm -fr `echo "Makefile test/Makefile test/TCP/Makefile test/Ethernet/Makefile \ - test/UDP/Makefile test/ICMP/Makefile test/Random/Makefile \ - test/OSPF/Makefile util/Makefile util/Get-mac/Makefile example/Makefile \ - libnet-config include/config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 -EOF -cat >> $CONFIG_STATUS </dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi -# Protect against being on the right side of a sed subst in config.status. -sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; - s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF -$ac_vpsub -$extrasub -s%@SHELL@%$SHELL%g -s%@CFLAGS@%$CFLAGS%g -s%@CPPFLAGS@%$CPPFLAGS%g -s%@CXXFLAGS@%$CXXFLAGS%g -s%@FFLAGS@%$FFLAGS%g -s%@DEFS@%$DEFS%g -s%@LDFLAGS@%$LDFLAGS%g -s%@LIBS@%$LIBS%g -s%@exec_prefix@%$exec_prefix%g -s%@prefix@%$prefix%g -s%@program_transform_name@%$program_transform_name%g -s%@bindir@%$bindir%g -s%@sbindir@%$sbindir%g -s%@libexecdir@%$libexecdir%g -s%@datadir@%$datadir%g -s%@sysconfdir@%$sysconfdir%g -s%@sharedstatedir@%$sharedstatedir%g -s%@localstatedir@%$localstatedir%g -s%@libdir@%$libdir%g -s%@includedir@%$includedir%g -s%@oldincludedir@%$oldincludedir%g -s%@infodir@%$infodir%g -s%@mandir@%$mandir%g -s%@LL_INT_TYPE_UC@%$LL_INT_TYPE_UC%g -s%@LL_INT_TYPE@%$LL_INT_TYPE%g -s%@LIB_PREFIX@%$LIB_PREFIX%g -s%@INC_PREFIX@%$INC_PREFIX%g -s%@MAN_PREFIX@%$MAN_PREFIX%g -s%@BIN_PREFIX@%$BIN_PREFIX%g -s%@RANLIB@%$RANLIB%g -s%@AR@%$AR%g -s%@LN@%$LN%g -s%@ADDITIONAL_LIBS@%$ADDITIONAL_LIBS%g -s%@LIBNET_CONFIG_DEFINES@%$LIBNET_CONFIG_DEFINES%g -s%@LIBNET_CONFIG_LIBS@%$LIBNET_CONFIG_LIBS%g -s%@LIBNET_CONFIG_CFLAGS@%$LIBNET_CONFIG_CFLAGS%g -s%@host@%$host%g -s%@host_alias@%$host_alias%g -s%@host_cpu@%$host_cpu%g -s%@host_vendor@%$host_vendor%g -s%@host_os@%$host_os%g -s%@target@%$target%g -s%@target_alias@%$target_alias%g -s%@target_cpu@%$target_cpu%g -s%@target_vendor@%$target_vendor%g -s%@target_os@%$target_os%g -s%@build@%$build%g -s%@build_alias@%$build_alias%g -s%@build_cpu@%$build_cpu%g -s%@build_vendor@%$build_vendor%g -s%@build_os@%$build_os%g -s%@CC@%$CC%g -s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g -s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g -s%@INSTALL_DATA@%$INSTALL_DATA%g -s%@SET_MAKE@%$SET_MAKE%g -s%@CPP@%$CPP%g -CEOF -EOF +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` -cat >> $CONFIG_STATUS <<\EOF -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file + PATH_SEPARATOR=: fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` + as_ln_s='ln -s' fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + +exec 6>&1 + +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by $as_me, which was +generated by GNU Autoconf 2.57. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 +_ACEOF + +# Files that config.status was made for. +if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +fi + +cat >>$CONFIG_STATUS <<\_ACEOF + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +config.status +configured by $0, generated by GNU Autoconf 2.57, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + +Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." +srcdir=$srcdir +INSTALL="$INSTALL" +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x\([^=]*\)='` + ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; + + esac + shift done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" fi -EOF -cat >> $CONFIG_STATUS <>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi -CONFIG_FILES=\${CONFIG_FILES-"Makefile test/Makefile test/TCP/Makefile test/Ethernet/Makefile \ - test/UDP/Makefile test/ICMP/Makefile test/Random/Makefile \ - test/OSPF/Makefile util/Makefile util/Get-mac/Makefile example/Makefile \ - libnet-config"} -EOF -cat >> $CONFIG_STATUS <<\EOF -for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; +_ACEOF + + + + + +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_config_target in $ac_config_targets +do + case "$ac_config_target" in + # Handling of arguments. + "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "test/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; + "test/TCP/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/TCP/Makefile" ;; + "test/Ethernet/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/Ethernet/Makefile" ;; + "test/UDP/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/UDP/Makefile" ;; + "test/ICMP/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/ICMP/Makefile" ;; + "test/Random/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/Random/Makefile" ;; + "test/OSPF/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/OSPF/Makefile" ;; + "util/Makefile" ) CONFIG_FILES="$CONFIG_FILES util/Makefile" ;; + "util/Get-mac/Makefile" ) CONFIG_FILES="$CONFIG_FILES util/Get-mac/Makefile" ;; + "example/Makefile" ) CONFIG_FILES="$CONFIG_FILES example/Makefile" ;; + "libnet-config" ) CONFIG_FILES="$CONFIG_FILES libnet-config" ;; + "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;; + "include/config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS include/config.h" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; esac +done - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dir_suffix= ac_dots= +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Create a temporary directory, and hook for its removal unless debugging. +$debug || +{ + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} + +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF + +# +# CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +s,@exec_prefix@,$exec_prefix,;t t +s,@prefix@,$prefix,;t t +s,@program_transform_name@,$program_transform_name,;t t +s,@bindir@,$bindir,;t t +s,@sbindir@,$sbindir,;t t +s,@libexecdir@,$libexecdir,;t t +s,@datadir@,$datadir,;t t +s,@sysconfdir@,$sysconfdir,;t t +s,@sharedstatedir@,$sharedstatedir,;t t +s,@localstatedir@,$localstatedir,;t t +s,@libdir@,$libdir,;t t +s,@includedir@,$includedir,;t t +s,@oldincludedir@,$oldincludedir,;t t +s,@infodir@,$infodir,;t t +s,@mandir@,$mandir,;t t +s,@build_alias@,$build_alias,;t t +s,@host_alias@,$host_alias,;t t +s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t +s,@ECHO_C@,$ECHO_C,;t t +s,@ECHO_N@,$ECHO_N,;t t +s,@ECHO_T@,$ECHO_T,;t t +s,@LIBS@,$LIBS,;t t +s,@LL_INT_TYPE_UC@,$LL_INT_TYPE_UC,;t t +s,@LL_INT_TYPE@,$LL_INT_TYPE,;t t +s,@LIB_PREFIX@,$LIB_PREFIX,;t t +s,@INC_PREFIX@,$INC_PREFIX,;t t +s,@MAN_PREFIX@,$MAN_PREFIX,;t t +s,@BIN_PREFIX@,$BIN_PREFIX,;t t +s,@RANLIB@,$RANLIB,;t t +s,@AR@,$AR,;t t +s,@LN@,$LN,;t t +s,@ADDITIONAL_LIBS@,$ADDITIONAL_LIBS,;t t +s,@LIBNET_CONFIG_DEFINES@,$LIBNET_CONFIG_DEFINES,;t t +s,@LIBNET_CONFIG_LIBS@,$LIBNET_CONFIG_LIBS,;t t +s,@LIBNET_CONFIG_CFLAGS@,$LIBNET_CONFIG_CFLAGS,;t t +s,@build@,$build,;t t +s,@build_cpu@,$build_cpu,;t t +s,@build_vendor@,$build_vendor,;t t +s,@build_os@,$build_os,;t t +s,@host@,$host,;t t +s,@host_cpu@,$host_cpu,;t t +s,@host_vendor@,$host_vendor,;t t +s,@host_os@,$host_os,;t t +s,@target@,$target,;t t +s,@target_cpu@,$target_cpu,;t t +s,@target_vendor@,$target_vendor,;t t +s,@target_os@,$target_os,;t t +s,@CC@,$CC,;t t +s,@CFLAGS@,$CFLAGS,;t t +s,@LDFLAGS@,$LDFLAGS,;t t +s,@CPPFLAGS@,$CPPFLAGS,;t t +s,@ac_ct_CC@,$ac_ct_CC,;t t +s,@EXEEXT@,$EXEEXT,;t t +s,@OBJEXT@,$OBJEXT,;t t +s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +s,@INSTALL_DATA@,$INSTALL_DATA,;t t +s,@SET_MAKE@,$SET_MAKE,;t t +s,@CPP@,$CPP,;t t +s,@EGREP@,$EGREP,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t +CEOF + +_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + else + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + fi + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat fi +fi # test -n "$CONFIG_FILES" - case "$ac_given_srcdir" in - .) srcdir=. - if test -z "$ac_dots"; then top_srcdir=. - else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; - /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; - *) # Relative path. - srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" - top_srcdir="$ac_dots$ac_given_srcdir" ;; +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; esac - case "$ac_given_INSTALL" in - [/$]*) INSTALL="$ac_given_INSTALL" ;; - *) INSTALL="$ac_dots$ac_given_INSTALL" ;; - esac + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } - echo creating "$ac_file" - rm -f "$ac_file" - configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." - case "$ac_file" in - *Makefile*) ac_comsub="1i\\ -# $configure_input" ;; - *) ac_comsub= ;; + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac +# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be +# absolute. +ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` +ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` +ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - sed -e "$ac_comsub -s%@configure_input@%$configure_input%g -s%@srcdir@%$srcdir%g -s%@top_srcdir@%$top_srcdir%g -s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file -fi; done -rm -f conftest.s* + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo $f;; + *) # Relative + if test -f "$f"; then + # Build tree + echo $f + elif test -f "$srcdir/$f"; then + # Source tree + echo $srcdir/$f + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s,@configure_input@,$configure_input,;t t +s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t +s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +s,@INSTALL@,$ac_INSTALL,;t t +" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi + +done +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + +# +# CONFIG_HEADER section. +# # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' -ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' -ac_dC='\3' -ac_dD='%g' -# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". -ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_uB='\([ ]\)%\1#\2define\3' +ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='[ ].*$,\1#\2' +ac_dC=' ' +ac_dD=',;t' +# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uB='$,\1#\2define\3' ac_uC=' ' -ac_uD='\4%g' -# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_eB='$%\1#\2define\3' -ac_eC=' ' -ac_eD='%g' +ac_uD=',;t' -if test "${CONFIG_HEADERS+set}" != set; then -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -fi -for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then +for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; esac - echo creating $ac_file + test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} - rm -f conftest.frag conftest.in conftest.out - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - cat $ac_file_inputs > conftest.in + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo $f;; + *) # Relative + if test -f "$f"; then + # Build tree + echo $f + elif test -f "$srcdir/$f"; then + # Source tree + echo $srcdir/$f + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } + # Remove the trailing spaces. + sed 's/[ ]*$//' $ac_file_inputs >$tmp/in -EOF +_ACEOF -# Transform confdefs.h into a sed script conftest.vals that substitutes -# the proper values into config.h.in to produce config.h. And first: -# Protect against being on the right side of a sed subst in config.status. -# Protect against being in an unquoted here document in config.status. -rm -f conftest.vals -cat > conftest.hdr <<\EOF -s/[\\&%]/\\&/g -s%[\\$`]%\\&%g -s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp -s%ac_d%ac_u%gp -s%ac_u%ac_e%gp -EOF -sed -n -f conftest.hdr confdefs.h > conftest.vals -rm -f conftest.hdr +# Transform confdefs.h into two sed scripts, `conftest.defines' and +# `conftest.undefs', that substitutes the proper values into +# config.h.in to produce config.h. The first handles `#define' +# templates, and the second `#undef' templates. +# And first: Protect against being on the right side of a sed subst in +# config.status. Protect against being in an unquoted here document +# in config.status. +rm -f conftest.defines conftest.undefs +# Using a here document instead of a string reduces the quoting nightmare. +# Putting comments in sed scripts is not portable. +# +# `end' is used to avoid that the second main sed command (meant for +# 0-ary CPP macros) applies to n-ary macro definitions. +# See the Autoconf documentation for `clear'. +cat >confdef2sed.sed <<\_ACEOF +s/[\\&,]/\\&/g +s,[\\$`],\\&,g +t clear +: clear +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp +t end +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp +: end +_ACEOF +# If some macros were called several times there might be several times +# the same #defines, which is useless. Nevertheless, we may not want to +# sort them, since we want the *last* AC-DEFINE to be honored. +uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines +sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs +rm -f confdef2sed.sed # This sed command replaces #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. -cat >> conftest.vals <<\EOF -s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% -EOF +cat >>conftest.undefs <<\_ACEOF +s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +_ACEOF -# Break up conftest.vals because some shells have a limit on -# the size of here documents, and old seds have small limits too. +# Break up conftest.defines because some shells have a limit on the size +# of here documents, and old seds have small limits too (100 cmds). +echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS +echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS +echo ' :' >>$CONFIG_STATUS +rm -f conftest.tail +while grep . conftest.defines >/dev/null +do + # Write a limited-size here document to $tmp/defines.sed. + echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS + # Speed up: don't consider the non `#define' lines. + echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS + # Work around the forget-to-reset-the-flag bug. + echo 't clr' >>$CONFIG_STATUS + echo ': clr' >>$CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS + echo 'CEOF + sed -f $tmp/defines.sed $tmp/in >$tmp/out + rm -f $tmp/in + mv $tmp/out $tmp/in +' >>$CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail + rm -f conftest.defines + mv conftest.tail conftest.defines +done +rm -f conftest.defines +echo ' fi # grep' >>$CONFIG_STATUS +echo >>$CONFIG_STATUS +# Break up conftest.undefs because some shells have a limit on the size +# of here documents, and old seds have small limits too (100 cmds). +echo ' # Handle all the #undef templates' >>$CONFIG_STATUS rm -f conftest.tail -while : +while grep . conftest.undefs >/dev/null do - ac_lines=`grep -c . conftest.vals` - # grep -c gives empty output for an empty file on some AIX systems. - if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi - # Write a limited-size here document to conftest.frag. - echo ' cat > conftest.frag <> $CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS + # Write a limited-size here document to $tmp/undefs.sed. + echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS + # Speed up: don't consider the non `#undef' + echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS + # Work around the forget-to-reset-the-flag bug. + echo 't clr' >>$CONFIG_STATUS + echo ': clr' >>$CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS echo 'CEOF - sed -f conftest.frag conftest.in > conftest.out - rm -f conftest.in - mv conftest.out conftest.in -' >> $CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail - rm -f conftest.vals - mv conftest.tail conftest.vals + sed -f $tmp/undefs.sed $tmp/in >$tmp/out + rm -f $tmp/in + mv $tmp/out $tmp/in +' >>$CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail + rm -f conftest.undefs + mv conftest.tail conftest.undefs done -rm -f conftest.vals +rm -f conftest.undefs -cat >> $CONFIG_STATUS <<\EOF - rm -f conftest.frag conftest.h - echo "/* $ac_file. Generated automatically by configure. */" > conftest.h - cat conftest.in >> conftest.h - rm -f conftest.in - if cmp -s $ac_file conftest.h 2>/dev/null; then - echo "$ac_file is unchanged" - rm -f conftest.h +cat >>$CONFIG_STATUS <<\_ACEOF + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + echo "/* Generated by configure. */" >$tmp/config.h else - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" + echo "/* $ac_file. Generated by configure. */" >$tmp/config.h + fi + cat $tmp/in >>$tmp/config.h + rm -f $tmp/in + if test x"$ac_file" != x-; then + if diff $ac_file $tmp/config.h >/dev/null 2>&1; then + { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +echo "$as_me: $ac_file is unchanged" >&6;} + else + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + rm -f $ac_file + mv $tmp/config.h $ac_file fi - rm -f $ac_file - mv conftest.h $ac_file + else + cat $tmp/config.h + rm -f $tmp/config.h fi -fi; done +done +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF -EOF -cat >> $CONFIG_STATUS </dev/null || +$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_dest" : 'X\(//\)[^/]' \| \ + X"$ac_dest" : 'X\(//\)$' \| \ + X"$ac_dest" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_dest" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + ac_builddir=. -EOF -cat >> $CONFIG_STATUS <<\EOF -chmod +x libnet-config -exit 0 -EOF +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac +# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be +# absolute. +ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` +ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` +ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + + + { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 +echo "$as_me: executing $ac_dest commands" >&6;} + case $ac_dest in + default ) chmod +x libnet-config ;; + esac +done +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +{ (exit 0); exit 0; } +_ACEOF chmod +x $CONFIG_STATUS -rm -fr confdefs* $ac_clean_files -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi --- Libnet-1.0.2a/include/libnet.h~configure +++ Libnet-1.0.2a/include/libnet.h @@ -84,8 +84,8 @@ #define LIBNET_VERSION "1.0.2a" #if (!LIBNET_LIL_ENDIAN && !LIBNET_BIG_ENDIAN) -#error "byte order has not been specified, you'll -need to #define either LIBNET_LIL_ENDIAN or LIBNET_BIG_ENDIAN. See the +#error "byte order has not been specified, you'll\ +need to #define either LIBNET_LIL_ENDIAN or LIBNET_BIG_ENDIAN. See the\ documentation regarding the libnet-config script." #endif --- Libnet-1.0.2a/./configure.in~configure +++ Libnet-1.0.2a/./configure.in @@ -6,7 +6,8 @@ dnl dnl Process this file with autoconf to produce a configure script. -AC_INIT(src/libnet_build_ip.c) +AC_INIT +AC_CONFIG_SRCDIR([src/libnet_build_ip.c]) VER=`cat VERSION` AC_MSG_RESULT(Beginning autoconfiguration process for libnet-$VER...) @@ -28,7 +29,7 @@ dnl dnl Determine hosttype and set the root install directory. dnl -AC_CANONICAL_SYSTEM +AC_CANONICAL_TARGET([]) AC_PREFIX_DEFAULT(/usr) if test "$prefix" = "NONE"; then @@ -49,7 +50,7 @@ dnl dnl Use these compiler flags if we have gcc. dnl -if test $ac_cv_prog_gcc = yes; then +if test $ac_cv_c_compiler_gnu = yes; then dnl if test -z $CFLAGS; then CCOPTS='-O2 -funroll-loops -fomit-frame-pointer -Wall' CFLAGS="$CCOPTS" @@ -258,9 +259,11 @@ AC_CHECK_HEADERS(sys/sockio.h) AC_CONFIG_HEADER(include/config.h) -AC_OUTPUT(Makefile test/Makefile test/TCP/Makefile test/Ethernet/Makefile \ +AC_CONFIG_FILES([Makefile test/Makefile test/TCP/Makefile test/Ethernet/Makefile \ test/UDP/Makefile test/ICMP/Makefile test/Random/Makefile \ test/OSPF/Makefile util/Makefile util/Get-mac/Makefile example/Makefile \ - libnet-config, chmod +x libnet-config) + libnet-config]) +AC_CONFIG_COMMANDS([default],[[chmod +x libnet-config]],[[]]) +AC_OUTPUT dnl EOF --- Libnet-1.0.2a/./support/bpf-lkm/OpenBSD/configure.in~configure +++ Libnet-1.0.2a/./support/bpf-lkm/OpenBSD/configure.in @@ -7,11 +7,13 @@ dnl Process this file with autoconf to produce a configure script. dnl -AC_INIT(ether_mod_load.c) +AC_INIT +AC_CONFIG_SRCDIR([ether_mod_load.c]) AC_SUBST(KERNEL_VERSION) KERNEL_VERSION=`uname -r` -AC_OUTPUT(Makefile) +AC_CONFIG_FILES([Makefile]) +AC_OUTPUT dnl EOF