From 709c4d66e0b107ca606941b988bad717c0b45d9b Mon Sep 17 00:00:00 2001 From: Denys Dmytriyenko Date: Tue, 17 Mar 2009 14:32:59 -0400 Subject: rename packages/ to recipes/ per earlier agreement See links below for more details: http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326 http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816 Signed-off-by: Denys Dmytriyenko Acked-by: Mike Westerhof Acked-by: Philip Balister Acked-by: Khem Raj Acked-by: Marcin Juszkiewicz Acked-by: Koen Kooi Acked-by: Frans Meulenbroeks --- recipes/net-snmp/files/init | 63 +++ recipes/net-snmp/files/mtx-1/snmpd.conf | 434 +++++++++++++++++++++ recipes/net-snmp/files/mtx-2/snmpd.conf | 434 +++++++++++++++++++++ recipes/net-snmp/files/snmpd.conf | 422 ++++++++++++++++++++ recipes/net-snmp/files/snmptrapd.conf | 18 + recipes/net-snmp/files/uclibc-fix.patch | 11 + .../net-snmp/net-snmp-5.4.1/configure-tail.patch | 99 +++++ recipes/net-snmp/net-snmp.inc | 97 +++++ recipes/net-snmp/net-snmp_5.1.2.bb | 18 + recipes/net-snmp/net-snmp_5.4.1.bb | 20 + recipes/net-snmp/net-snmp_svn.bb | 27 ++ 11 files changed, 1643 insertions(+) create mode 100755 recipes/net-snmp/files/init create mode 100644 recipes/net-snmp/files/mtx-1/snmpd.conf create mode 100644 recipes/net-snmp/files/mtx-2/snmpd.conf create mode 100644 recipes/net-snmp/files/snmpd.conf create mode 100644 recipes/net-snmp/files/snmptrapd.conf create mode 100644 recipes/net-snmp/files/uclibc-fix.patch create mode 100644 recipes/net-snmp/net-snmp-5.4.1/configure-tail.patch create mode 100644 recipes/net-snmp/net-snmp.inc create mode 100644 recipes/net-snmp/net-snmp_5.1.2.bb create mode 100644 recipes/net-snmp/net-snmp_5.4.1.bb create mode 100644 recipes/net-snmp/net-snmp_svn.bb (limited to 'recipes/net-snmp') diff --git a/recipes/net-snmp/files/init b/recipes/net-snmp/files/init new file mode 100755 index 0000000000..434b2fa3f2 --- /dev/null +++ b/recipes/net-snmp/files/init @@ -0,0 +1,63 @@ +#! /bin/sh +# /etc/init.d/snmpd: start snmp daemon. + +test -x /usr/sbin/snmpd || exit 0 +test -x /usr/sbin/snmptrapd || exit 0 + +# Defaults +export MIBDIRS=/usr/share/snmp/mibs +SNMPDRUN=yes +SNMPDOPTS='-Lsd -Lf /dev/null -p /var/run/snmpd.pid' +TRAPDRUN=no +TRAPDOPTS='-Lsd -p /var/run/snmptrapd.pid' + +# Cd to / before starting any daemons. +cd / + +case "$1" in + start) + echo -n "Starting network management services:" + if [ "$SNMPDRUN" = "yes" -a -f /etc/snmp/snmpd.conf ]; then + start-stop-daemon -S -x /usr/sbin/snmpd \ + -- $SNMPDOPTS + echo -n " snmpd" + fi + if [ "$TRAPDRUN" = "yes" -a -f /etc/snmp/snmptrapd.conf ]; then + start-stop-daemon -S -x /usr/sbin/snmptrapd \ + -- $TRAPDOPTS + echo -n " snmptrapd" + fi + echo "." + ;; + stop) + echo -n "Stopping network management services:" + start-stop-daemon -K -x /usr/sbin/snmpd + echo -n " snmpd" + start-stop-daemon -K -x /usr/sbin/snmptrapd + echo -n " snmptrapd" + echo "." + ;; + restart|reload|force-reload) + echo -n "Restarting network management services:" + start-stop-daemon -K -x /usr/sbin/snmpd + start-stop-daemon -K -x /usr/sbin/snmptrapd + # Allow the daemons time to exit completely. + sleep 2 + if [ "$SNMPDRUN" = "yes" -a -f /etc/snmp/snmpd.conf ]; then + start-stop-daemon -S -x /usr/sbin/snmpd -- $SNMPDOPTS + echo -n " snmpd" + fi + if [ "$TRAPDRUN" = "yes" -a -f /etc/snmp/snmptrapd.conf ]; then + # Allow snmpd time to start up. + sleep 1 + start-stop-daemon -S -x /usr/sbin/snmptrapd -- $TRAPDOPTS + echo -n " snmptrapd" + fi + echo "." + ;; + *) + echo "Usage: /etc/init.d/snmpd {start|stop|restart|reload|force-reload}" + exit 1 +esac + +exit 0 diff --git a/recipes/net-snmp/files/mtx-1/snmpd.conf b/recipes/net-snmp/files/mtx-1/snmpd.conf new file mode 100644 index 0000000000..9067f68d22 --- /dev/null +++ b/recipes/net-snmp/files/mtx-1/snmpd.conf @@ -0,0 +1,434 @@ +############################################################################### +# +# EXAMPLE.conf: +# An example configuration file for configuring the ucd-snmp snmpd agent. +# +############################################################################### +# +# This file is intended to only be an example. If, however, you want +# to use it, it should be placed in /etc/snmp/snmpd.conf. +# When the snmpd agent starts up, this is where it will look for it. +# +# You might be interested in generating your own snmpd.conf file using +# the "snmpconf" program (perl script) instead. It's a nice menu +# based interface to writing well commented configuration files. Try it! +# +# Note: This file is automatically generated from EXAMPLE.conf.def. +# Do NOT read the EXAMPLE.conf.def file! Instead, after you have run +# configure & make, and then make sure you read the EXAMPLE.conf file +# instead, as it will tailor itself to your configuration. + +# All lines beginning with a '#' are comments and are intended for you +# to read. All other lines are configuration commands for the agent. + +# +# PLEASE: read the snmpd.conf(5) manual page as well! +# + + +############################################################################### +# Access Control +############################################################################### + +# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY +# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO +# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE. + +# By far, the most common question I get about the agent is "why won't +# it work?", when really it should be "how do I configure the agent to +# allow me to access it?" +# +# By default, the agent responds to the "public" community for read +# only access, if run out of the box without any configuration file in +# place. The following examples show you other ways of configuring +# the agent so that you can change the community names, and give +# yourself write access as well. +# +# The following lines change the access permissions of the agent so +# that the COMMUNITY string provides read-only access to your entire +# NETWORK (EG: 10.10.10.0/24), and read/write access to only the +# localhost (127.0.0.1, not its real ipaddress). +# +# For more information, read the FAQ as well as the snmpd.conf(5) +# manual page. + +#### +# First, map the community name (COMMUNITY) into a security name +# (local and mynetwork, depending on where the request is coming +# from): + +# sec.name source community +#com2sec paranoid default public +com2sec readonly default public +#com2sec readwrite default private + +#### +# Second, map the security names into group names: + +# sec.model sec.name +group MyROSystem v1 paranoid +group MyROSystem v2c paranoid +group MyROSystem usm paranoid +group MyROGroup v1 readonly +group MyROGroup v2c readonly +group MyROGroup usm readonly +group MyRWGroup v1 readwrite +group MyRWGroup v2c readwrite +group MyRWGroup usm readwrite + +#### +# Third, create a view for us to let the groups have rights to: + +# incl/excl subtree mask +view all included .1 80 +view system included .iso.org.dod.internet.mgmt.mib-2.system + +#### +# Finally, grant the 2 groups access to the 1 view with different +# write permissions: + +# context sec.model sec.level match read write notif +access MyROSystem "" any noauth exact system none none +access MyROGroup "" any noauth exact all none none +access MyRWGroup "" any noauth exact all all none + +# ----------------------------------------------------------------------------- + + +############################################################################### +# System contact information +# + +# It is also possible to set the sysContact and sysLocation system +# variables through the snmpd.conf file. **PLEASE NOTE** that setting +# the value of these objects here makes these objects READ-ONLY +# (regardless of any access control settings). Any attempt to set the +# value of an object whose value is given here will fail with an error +# status of notWritable. + +syslocation Unknown (configure /etc/snmp/snmpd.local.conf) +syscontact Root (configure /etc/snmp/snmpd.local.conf) + +# Example output of snmpwalk: +# % snmpwalk -v 1 -c public localhost system +# system.sysDescr.0 = "SunOS name sun4c" +# system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4 +# system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55 +# system.sysContact.0 = "Me " +# system.sysName.0 = "name" +# system.sysLocation.0 = "Right here, right now." +# system.sysServices.0 = 72 + + +# ----------------------------------------------------------------------------- + + +############################################################################### +# Process checks. +# +# The following are examples of how to use the agent to check for +# processes running on the host. The syntax looks something like: +# +# proc NAME [MAX=0] [MIN=0] +# +# NAME: the name of the process to check for. It must match +# exactly (ie, http will not find httpd processes). +# MAX: the maximum number allowed to be running. Defaults to 0. +# MIN: the minimum number to be running. Defaults to 0. + +# +# Examples: +# + +# Make sure mountd is running +#proc mountd + +# Make sure there are no more than 4 ntalkds running, but 0 is ok too. +#proc ntalkd 4 + +# Make sure at least one sendmail, but less than or equal to 10 are running. +#proc sendmail 10 1 + +# A snmpwalk of the prTable would look something like this: +# +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.2 +# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1 +# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2 +# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3 +# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd" +# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd" +# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail" +# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0 +# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0 +# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1 +# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0 +# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4 +# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10 +# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0 +# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0 +# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1 +# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1 +# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0 +# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0 +# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running." +# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = "" +# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = "" +# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0 +# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0 +# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0 +# +# Note that the errorFlag for mountd is set to 1 because one is not +# running (in this case an rpc.mountd is, but thats not good enough), +# and the ErrMessage tells you what's wrong. The configuration +# imposed in the snmpd.conf file is also shown. +# +# Special Case: When the min and max numbers are both 0, it assumes +# you want a max of infinity and a min of 1. +# + + +# ----------------------------------------------------------------------------- + + +############################################################################### +# Executables/scripts +# + +# +# You can also have programs run by the agent that return a single +# line of output and an exit code. Here are two examples. +# +# exec NAME PROGRAM [ARGS ...] +# +# NAME: A generic name. +# PROGRAM: The program to run. Include the path! +# ARGS: optional arguments to be passed to the program + +# a simple hello world +#exec echotest /bin/echo hello world + +# Run a shell script containing: +# +# #!/bin/sh +# echo hello world +# echo hi there +# exit 35 +# +# Note: this has been specifically commented out to prevent +# accidental security holes due to someone else on your system writing +# a /tmp/shtest before you do. Uncomment to use it. +# +#exec shelltest /bin/sh /tmp/shtest + +# Then, +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.8 +# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1 +# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2 +# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest" +# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest" +# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world" +# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest" +# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0 +# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35 +# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world." +# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world." +# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0 +# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0 + +# Note that the second line of the /tmp/shtest shell script is cut +# off. Also note that the exit status of 35 was returned. + +# ----------------------------------------------------------------------------- + + +############################################################################### +# disk checks +# + +# The agent can check the amount of available disk space, and make +# sure it is above a set limit. + +# disk PATH [MIN=DEFDISKMINIMUMSPACE] +# +# PATH: mount path to the disk in question. +# MIN: Disks with space below this value will have the Mib's errorFlag set. +# Default value = DEFDISKMINIMUMSPACE. + +# Check the / partition and make sure it contains at least 10 megs. + +#disk / 10000 + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.9 +# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0 +# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F +# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0" +# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000 +# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130 +# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325 +# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092 +# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58 +# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0 +# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = "" + +# ----------------------------------------------------------------------------- + + +############################################################################### +# load average checks +# + +# load [1MAX=DEFMAXLOADAVE] [5MAX=DEFMAXLOADAVE] [15MAX=DEFMAXLOADAVE] +# +# 1MAX: If the 1 minute load average is above this limit at query +# time, the errorFlag will be set. +# 5MAX: Similar, but for 5 min average. +# 15MAX: Similar, but for 15 min average. + +# Check for loads: +#load 12 14 14 + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.10 +# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1 +# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2 +# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3 +# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1" +# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5" +# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15" +# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39 +# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31 +# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36 +# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00" +# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00" +# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00" +# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0 +# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0 +# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0 +# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = "" +# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = "" +# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = "" + +# ----------------------------------------------------------------------------- + + +############################################################################### +# Extensible sections. +# + +# This alleviates the multiple line output problem found in the +# previous executable mib by placing each mib in its own mib table: + +# Run a shell script containing: +# +# #!/bin/sh +# echo hello world +# echo hi there +# exit 35 +# +# Note: this has been specifically commented out to prevent +# accidental security holes due to someone else on your system writing +# a /tmp/shtest before you do. Uncomment to use it. +# +# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.50 +# enterprises.ucdavis.50.1.1 = 1 +# enterprises.ucdavis.50.2.1 = "shelltest" +# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest" +# enterprises.ucdavis.50.100.1 = 35 +# enterprises.ucdavis.50.101.1 = "hello world." +# enterprises.ucdavis.50.101.2 = "hi there." +# enterprises.ucdavis.50.102.1 = 0 + +# Now the Output has grown to two lines, and we can see the 'hi +# there.' output as the second line from our shell script. +# +# Note that you must alter the mib.txt file to be correct if you want +# the .50.* outputs above to change to reasonable text descriptions. + +# Other ideas: +# +# exec .1.3.6.1.4.1.2021.51 ps /bin/ps +# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top +# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq + +# ----------------------------------------------------------------------------- + + +############################################################################### +# Pass through control. +# + +# Usage: +# pass MIBOID EXEC-COMMAND +# +# This will pass total control of the mib underneath the MIBOID +# portion of the mib to the EXEC-COMMAND. +# +# Note: You'll have to change the path of the passtest script to your +# source directory or install it in the given location. +# +# Example: (see the script for details) +# (commented out here since it requires that you place the +# script in the right location. (its not installed by default)) + +# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/passtest + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.255 +# enterprises.ucdavis.255.1 = "life the universe and everything" +# enterprises.ucdavis.255.2.1 = 42 +# enterprises.ucdavis.255.2.2 = OID: 42.42.42 +# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42 +# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1 +# enterprises.ucdavis.255.5 = 42 +# enterprises.ucdavis.255.6 = Gauge: 42 +# +# % snmpget -v 1 -c public localhost .1.3.6.1.4.1.2021.255.5 +# enterprises.ucdavis.255.5 = 42 +# +# % snmpset -v 1 -c public localhost .1.3.6.1.4.1.2021.255.1 s "New string" +# enterprises.ucdavis.255.1 = "New string" +# + +# For specific usage information, see the man/snmpd.conf.5 manual page +# as well as the local/passtest script used in the above example. + +############################################################################### +# Subagent control +# + +# The agent can support subagents using a number of extension mechanisms. +# From the 4.2.1 release, AgentX support is being compiled in by default. +# However, this is still experimental code, so should not be used on +# critical production systems. +# Please see the file README.agentx for more details. +# +# If having read, marked, learnt and inwardly digested this information, +# you decide that you do wish to make use of this mechanism, simply +# uncomment the following directive. +# +# master agentx +# +# I repeat - this is *NOT* regarded as suitable for front-line production +# systems, though it is probably stable enough for day-to-day use. +# Probably. +# +# No refunds will be given. + +############################################################################### +# Further Information +# +# See the snmpd.conf manual page, and the output of "snmpd -H". +# MUCH more can be done with the snmpd.conf than is shown as an +# example here. + +############################################################################### +# interfaces + +# types: +# ieee80211(71) +# ethernetCsmacd(6), + +# interface name type speed +interface eth0 6 100000000 +interface wlan0 71 5000000 +interface wlan1 71 5000000 diff --git a/recipes/net-snmp/files/mtx-2/snmpd.conf b/recipes/net-snmp/files/mtx-2/snmpd.conf new file mode 100644 index 0000000000..9067f68d22 --- /dev/null +++ b/recipes/net-snmp/files/mtx-2/snmpd.conf @@ -0,0 +1,434 @@ +############################################################################### +# +# EXAMPLE.conf: +# An example configuration file for configuring the ucd-snmp snmpd agent. +# +############################################################################### +# +# This file is intended to only be an example. If, however, you want +# to use it, it should be placed in /etc/snmp/snmpd.conf. +# When the snmpd agent starts up, this is where it will look for it. +# +# You might be interested in generating your own snmpd.conf file using +# the "snmpconf" program (perl script) instead. It's a nice menu +# based interface to writing well commented configuration files. Try it! +# +# Note: This file is automatically generated from EXAMPLE.conf.def. +# Do NOT read the EXAMPLE.conf.def file! Instead, after you have run +# configure & make, and then make sure you read the EXAMPLE.conf file +# instead, as it will tailor itself to your configuration. + +# All lines beginning with a '#' are comments and are intended for you +# to read. All other lines are configuration commands for the agent. + +# +# PLEASE: read the snmpd.conf(5) manual page as well! +# + + +############################################################################### +# Access Control +############################################################################### + +# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY +# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO +# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE. + +# By far, the most common question I get about the agent is "why won't +# it work?", when really it should be "how do I configure the agent to +# allow me to access it?" +# +# By default, the agent responds to the "public" community for read +# only access, if run out of the box without any configuration file in +# place. The following examples show you other ways of configuring +# the agent so that you can change the community names, and give +# yourself write access as well. +# +# The following lines change the access permissions of the agent so +# that the COMMUNITY string provides read-only access to your entire +# NETWORK (EG: 10.10.10.0/24), and read/write access to only the +# localhost (127.0.0.1, not its real ipaddress). +# +# For more information, read the FAQ as well as the snmpd.conf(5) +# manual page. + +#### +# First, map the community name (COMMUNITY) into a security name +# (local and mynetwork, depending on where the request is coming +# from): + +# sec.name source community +#com2sec paranoid default public +com2sec readonly default public +#com2sec readwrite default private + +#### +# Second, map the security names into group names: + +# sec.model sec.name +group MyROSystem v1 paranoid +group MyROSystem v2c paranoid +group MyROSystem usm paranoid +group MyROGroup v1 readonly +group MyROGroup v2c readonly +group MyROGroup usm readonly +group MyRWGroup v1 readwrite +group MyRWGroup v2c readwrite +group MyRWGroup usm readwrite + +#### +# Third, create a view for us to let the groups have rights to: + +# incl/excl subtree mask +view all included .1 80 +view system included .iso.org.dod.internet.mgmt.mib-2.system + +#### +# Finally, grant the 2 groups access to the 1 view with different +# write permissions: + +# context sec.model sec.level match read write notif +access MyROSystem "" any noauth exact system none none +access MyROGroup "" any noauth exact all none none +access MyRWGroup "" any noauth exact all all none + +# ----------------------------------------------------------------------------- + + +############################################################################### +# System contact information +# + +# It is also possible to set the sysContact and sysLocation system +# variables through the snmpd.conf file. **PLEASE NOTE** that setting +# the value of these objects here makes these objects READ-ONLY +# (regardless of any access control settings). Any attempt to set the +# value of an object whose value is given here will fail with an error +# status of notWritable. + +syslocation Unknown (configure /etc/snmp/snmpd.local.conf) +syscontact Root (configure /etc/snmp/snmpd.local.conf) + +# Example output of snmpwalk: +# % snmpwalk -v 1 -c public localhost system +# system.sysDescr.0 = "SunOS name sun4c" +# system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4 +# system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55 +# system.sysContact.0 = "Me " +# system.sysName.0 = "name" +# system.sysLocation.0 = "Right here, right now." +# system.sysServices.0 = 72 + + +# ----------------------------------------------------------------------------- + + +############################################################################### +# Process checks. +# +# The following are examples of how to use the agent to check for +# processes running on the host. The syntax looks something like: +# +# proc NAME [MAX=0] [MIN=0] +# +# NAME: the name of the process to check for. It must match +# exactly (ie, http will not find httpd processes). +# MAX: the maximum number allowed to be running. Defaults to 0. +# MIN: the minimum number to be running. Defaults to 0. + +# +# Examples: +# + +# Make sure mountd is running +#proc mountd + +# Make sure there are no more than 4 ntalkds running, but 0 is ok too. +#proc ntalkd 4 + +# Make sure at least one sendmail, but less than or equal to 10 are running. +#proc sendmail 10 1 + +# A snmpwalk of the prTable would look something like this: +# +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.2 +# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1 +# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2 +# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3 +# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd" +# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd" +# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail" +# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0 +# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0 +# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1 +# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0 +# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4 +# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10 +# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0 +# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0 +# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1 +# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1 +# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0 +# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0 +# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running." +# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = "" +# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = "" +# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0 +# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0 +# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0 +# +# Note that the errorFlag for mountd is set to 1 because one is not +# running (in this case an rpc.mountd is, but thats not good enough), +# and the ErrMessage tells you what's wrong. The configuration +# imposed in the snmpd.conf file is also shown. +# +# Special Case: When the min and max numbers are both 0, it assumes +# you want a max of infinity and a min of 1. +# + + +# ----------------------------------------------------------------------------- + + +############################################################################### +# Executables/scripts +# + +# +# You can also have programs run by the agent that return a single +# line of output and an exit code. Here are two examples. +# +# exec NAME PROGRAM [ARGS ...] +# +# NAME: A generic name. +# PROGRAM: The program to run. Include the path! +# ARGS: optional arguments to be passed to the program + +# a simple hello world +#exec echotest /bin/echo hello world + +# Run a shell script containing: +# +# #!/bin/sh +# echo hello world +# echo hi there +# exit 35 +# +# Note: this has been specifically commented out to prevent +# accidental security holes due to someone else on your system writing +# a /tmp/shtest before you do. Uncomment to use it. +# +#exec shelltest /bin/sh /tmp/shtest + +# Then, +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.8 +# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1 +# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2 +# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest" +# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest" +# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world" +# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest" +# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0 +# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35 +# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world." +# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world." +# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0 +# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0 + +# Note that the second line of the /tmp/shtest shell script is cut +# off. Also note that the exit status of 35 was returned. + +# ----------------------------------------------------------------------------- + + +############################################################################### +# disk checks +# + +# The agent can check the amount of available disk space, and make +# sure it is above a set limit. + +# disk PATH [MIN=DEFDISKMINIMUMSPACE] +# +# PATH: mount path to the disk in question. +# MIN: Disks with space below this value will have the Mib's errorFlag set. +# Default value = DEFDISKMINIMUMSPACE. + +# Check the / partition and make sure it contains at least 10 megs. + +#disk / 10000 + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.9 +# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0 +# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F +# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0" +# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000 +# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130 +# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325 +# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092 +# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58 +# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0 +# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = "" + +# ----------------------------------------------------------------------------- + + +############################################################################### +# load average checks +# + +# load [1MAX=DEFMAXLOADAVE] [5MAX=DEFMAXLOADAVE] [15MAX=DEFMAXLOADAVE] +# +# 1MAX: If the 1 minute load average is above this limit at query +# time, the errorFlag will be set. +# 5MAX: Similar, but for 5 min average. +# 15MAX: Similar, but for 15 min average. + +# Check for loads: +#load 12 14 14 + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.10 +# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1 +# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2 +# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3 +# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1" +# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5" +# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15" +# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39 +# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31 +# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36 +# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00" +# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00" +# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00" +# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0 +# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0 +# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0 +# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = "" +# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = "" +# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = "" + +# ----------------------------------------------------------------------------- + + +############################################################################### +# Extensible sections. +# + +# This alleviates the multiple line output problem found in the +# previous executable mib by placing each mib in its own mib table: + +# Run a shell script containing: +# +# #!/bin/sh +# echo hello world +# echo hi there +# exit 35 +# +# Note: this has been specifically commented out to prevent +# accidental security holes due to someone else on your system writing +# a /tmp/shtest before you do. Uncomment to use it. +# +# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.50 +# enterprises.ucdavis.50.1.1 = 1 +# enterprises.ucdavis.50.2.1 = "shelltest" +# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest" +# enterprises.ucdavis.50.100.1 = 35 +# enterprises.ucdavis.50.101.1 = "hello world." +# enterprises.ucdavis.50.101.2 = "hi there." +# enterprises.ucdavis.50.102.1 = 0 + +# Now the Output has grown to two lines, and we can see the 'hi +# there.' output as the second line from our shell script. +# +# Note that you must alter the mib.txt file to be correct if you want +# the .50.* outputs above to change to reasonable text descriptions. + +# Other ideas: +# +# exec .1.3.6.1.4.1.2021.51 ps /bin/ps +# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top +# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq + +# ----------------------------------------------------------------------------- + + +############################################################################### +# Pass through control. +# + +# Usage: +# pass MIBOID EXEC-COMMAND +# +# This will pass total control of the mib underneath the MIBOID +# portion of the mib to the EXEC-COMMAND. +# +# Note: You'll have to change the path of the passtest script to your +# source directory or install it in the given location. +# +# Example: (see the script for details) +# (commented out here since it requires that you place the +# script in the right location. (its not installed by default)) + +# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/passtest + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.255 +# enterprises.ucdavis.255.1 = "life the universe and everything" +# enterprises.ucdavis.255.2.1 = 42 +# enterprises.ucdavis.255.2.2 = OID: 42.42.42 +# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42 +# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1 +# enterprises.ucdavis.255.5 = 42 +# enterprises.ucdavis.255.6 = Gauge: 42 +# +# % snmpget -v 1 -c public localhost .1.3.6.1.4.1.2021.255.5 +# enterprises.ucdavis.255.5 = 42 +# +# % snmpset -v 1 -c public localhost .1.3.6.1.4.1.2021.255.1 s "New string" +# enterprises.ucdavis.255.1 = "New string" +# + +# For specific usage information, see the man/snmpd.conf.5 manual page +# as well as the local/passtest script used in the above example. + +############################################################################### +# Subagent control +# + +# The agent can support subagents using a number of extension mechanisms. +# From the 4.2.1 release, AgentX support is being compiled in by default. +# However, this is still experimental code, so should not be used on +# critical production systems. +# Please see the file README.agentx for more details. +# +# If having read, marked, learnt and inwardly digested this information, +# you decide that you do wish to make use of this mechanism, simply +# uncomment the following directive. +# +# master agentx +# +# I repeat - this is *NOT* regarded as suitable for front-line production +# systems, though it is probably stable enough for day-to-day use. +# Probably. +# +# No refunds will be given. + +############################################################################### +# Further Information +# +# See the snmpd.conf manual page, and the output of "snmpd -H". +# MUCH more can be done with the snmpd.conf than is shown as an +# example here. + +############################################################################### +# interfaces + +# types: +# ieee80211(71) +# ethernetCsmacd(6), + +# interface name type speed +interface eth0 6 100000000 +interface wlan0 71 5000000 +interface wlan1 71 5000000 diff --git a/recipes/net-snmp/files/snmpd.conf b/recipes/net-snmp/files/snmpd.conf new file mode 100644 index 0000000000..728171c427 --- /dev/null +++ b/recipes/net-snmp/files/snmpd.conf @@ -0,0 +1,422 @@ +############################################################################### +# +# EXAMPLE.conf: +# An example configuration file for configuring the ucd-snmp snmpd agent. +# +############################################################################### +# +# This file is intended to only be an example. If, however, you want +# to use it, it should be placed in /etc/snmp/snmpd.conf. +# When the snmpd agent starts up, this is where it will look for it. +# +# You might be interested in generating your own snmpd.conf file using +# the "snmpconf" program (perl script) instead. It's a nice menu +# based interface to writing well commented configuration files. Try it! +# +# Note: This file is automatically generated from EXAMPLE.conf.def. +# Do NOT read the EXAMPLE.conf.def file! Instead, after you have run +# configure & make, and then make sure you read the EXAMPLE.conf file +# instead, as it will tailor itself to your configuration. + +# All lines beginning with a '#' are comments and are intended for you +# to read. All other lines are configuration commands for the agent. + +# +# PLEASE: read the snmpd.conf(5) manual page as well! +# + + +############################################################################### +# Access Control +############################################################################### + +# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY +# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO +# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE. + +# By far, the most common question I get about the agent is "why won't +# it work?", when really it should be "how do I configure the agent to +# allow me to access it?" +# +# By default, the agent responds to the "public" community for read +# only access, if run out of the box without any configuration file in +# place. The following examples show you other ways of configuring +# the agent so that you can change the community names, and give +# yourself write access as well. +# +# The following lines change the access permissions of the agent so +# that the COMMUNITY string provides read-only access to your entire +# NETWORK (EG: 10.10.10.0/24), and read/write access to only the +# localhost (127.0.0.1, not its real ipaddress). +# +# For more information, read the FAQ as well as the snmpd.conf(5) +# manual page. + +#### +# First, map the community name (COMMUNITY) into a security name +# (local and mynetwork, depending on where the request is coming +# from): + +# sec.name source community +com2sec paranoid default public +#com2sec readonly default public +#com2sec readwrite default private + +#### +# Second, map the security names into group names: + +# sec.model sec.name +group MyROSystem v1 paranoid +group MyROSystem v2c paranoid +group MyROSystem usm paranoid +group MyROGroup v1 readonly +group MyROGroup v2c readonly +group MyROGroup usm readonly +group MyRWGroup v1 readwrite +group MyRWGroup v2c readwrite +group MyRWGroup usm readwrite + +#### +# Third, create a view for us to let the groups have rights to: + +# incl/excl subtree mask +view all included .1 80 +view system included .iso.org.dod.internet.mgmt.mib-2.system + +#### +# Finally, grant the 2 groups access to the 1 view with different +# write permissions: + +# context sec.model sec.level match read write notif +access MyROSystem "" any noauth exact system none none +access MyROGroup "" any noauth exact all none none +access MyRWGroup "" any noauth exact all all none + +# ----------------------------------------------------------------------------- + + +############################################################################### +# System contact information +# + +# It is also possible to set the sysContact and sysLocation system +# variables through the snmpd.conf file. **PLEASE NOTE** that setting +# the value of these objects here makes these objects READ-ONLY +# (regardless of any access control settings). Any attempt to set the +# value of an object whose value is given here will fail with an error +# status of notWritable. + +syslocation Unknown (configure /etc/snmp/snmpd.local.conf) +syscontact Root (configure /etc/snmp/snmpd.local.conf) + +# Example output of snmpwalk: +# % snmpwalk -v 1 -c public localhost system +# system.sysDescr.0 = "SunOS name sun4c" +# system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4 +# system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55 +# system.sysContact.0 = "Me " +# system.sysName.0 = "name" +# system.sysLocation.0 = "Right here, right now." +# system.sysServices.0 = 72 + + +# ----------------------------------------------------------------------------- + + +############################################################################### +# Process checks. +# +# The following are examples of how to use the agent to check for +# processes running on the host. The syntax looks something like: +# +# proc NAME [MAX=0] [MIN=0] +# +# NAME: the name of the process to check for. It must match +# exactly (ie, http will not find httpd processes). +# MAX: the maximum number allowed to be running. Defaults to 0. +# MIN: the minimum number to be running. Defaults to 0. + +# +# Examples: +# + +# Make sure mountd is running +#proc mountd + +# Make sure there are no more than 4 ntalkds running, but 0 is ok too. +#proc ntalkd 4 + +# Make sure at least one sendmail, but less than or equal to 10 are running. +#proc sendmail 10 1 + +# A snmpwalk of the prTable would look something like this: +# +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.2 +# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1 +# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2 +# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3 +# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd" +# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd" +# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail" +# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0 +# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0 +# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1 +# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0 +# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4 +# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10 +# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0 +# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0 +# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1 +# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1 +# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0 +# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0 +# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running." +# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = "" +# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = "" +# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0 +# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0 +# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0 +# +# Note that the errorFlag for mountd is set to 1 because one is not +# running (in this case an rpc.mountd is, but thats not good enough), +# and the ErrMessage tells you what's wrong. The configuration +# imposed in the snmpd.conf file is also shown. +# +# Special Case: When the min and max numbers are both 0, it assumes +# you want a max of infinity and a min of 1. +# + + +# ----------------------------------------------------------------------------- + + +############################################################################### +# Executables/scripts +# + +# +# You can also have programs run by the agent that return a single +# line of output and an exit code. Here are two examples. +# +# exec NAME PROGRAM [ARGS ...] +# +# NAME: A generic name. +# PROGRAM: The program to run. Include the path! +# ARGS: optional arguments to be passed to the program + +# a simple hello world +#exec echotest /bin/echo hello world + +# Run a shell script containing: +# +# #!/bin/sh +# echo hello world +# echo hi there +# exit 35 +# +# Note: this has been specifically commented out to prevent +# accidental security holes due to someone else on your system writing +# a /tmp/shtest before you do. Uncomment to use it. +# +#exec shelltest /bin/sh /tmp/shtest + +# Then, +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.8 +# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1 +# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2 +# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest" +# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest" +# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world" +# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest" +# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0 +# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35 +# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world." +# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world." +# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0 +# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0 + +# Note that the second line of the /tmp/shtest shell script is cut +# off. Also note that the exit status of 35 was returned. + +# ----------------------------------------------------------------------------- + + +############################################################################### +# disk checks +# + +# The agent can check the amount of available disk space, and make +# sure it is above a set limit. + +# disk PATH [MIN=DEFDISKMINIMUMSPACE] +# +# PATH: mount path to the disk in question. +# MIN: Disks with space below this value will have the Mib's errorFlag set. +# Default value = DEFDISKMINIMUMSPACE. + +# Check the / partition and make sure it contains at least 10 megs. + +#disk / 10000 + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.9 +# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0 +# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F +# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0" +# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000 +# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130 +# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325 +# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092 +# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58 +# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0 +# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = "" + +# ----------------------------------------------------------------------------- + + +############################################################################### +# load average checks +# + +# load [1MAX=DEFMAXLOADAVE] [5MAX=DEFMAXLOADAVE] [15MAX=DEFMAXLOADAVE] +# +# 1MAX: If the 1 minute load average is above this limit at query +# time, the errorFlag will be set. +# 5MAX: Similar, but for 5 min average. +# 15MAX: Similar, but for 15 min average. + +# Check for loads: +#load 12 14 14 + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.10 +# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1 +# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2 +# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3 +# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1" +# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5" +# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15" +# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39 +# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31 +# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36 +# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00" +# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00" +# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00" +# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0 +# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0 +# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0 +# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = "" +# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = "" +# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = "" + +# ----------------------------------------------------------------------------- + + +############################################################################### +# Extensible sections. +# + +# This alleviates the multiple line output problem found in the +# previous executable mib by placing each mib in its own mib table: + +# Run a shell script containing: +# +# #!/bin/sh +# echo hello world +# echo hi there +# exit 35 +# +# Note: this has been specifically commented out to prevent +# accidental security holes due to someone else on your system writing +# a /tmp/shtest before you do. Uncomment to use it. +# +# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.50 +# enterprises.ucdavis.50.1.1 = 1 +# enterprises.ucdavis.50.2.1 = "shelltest" +# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest" +# enterprises.ucdavis.50.100.1 = 35 +# enterprises.ucdavis.50.101.1 = "hello world." +# enterprises.ucdavis.50.101.2 = "hi there." +# enterprises.ucdavis.50.102.1 = 0 + +# Now the Output has grown to two lines, and we can see the 'hi +# there.' output as the second line from our shell script. +# +# Note that you must alter the mib.txt file to be correct if you want +# the .50.* outputs above to change to reasonable text descriptions. + +# Other ideas: +# +# exec .1.3.6.1.4.1.2021.51 ps /bin/ps +# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top +# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq + +# ----------------------------------------------------------------------------- + + +############################################################################### +# Pass through control. +# + +# Usage: +# pass MIBOID EXEC-COMMAND +# +# This will pass total control of the mib underneath the MIBOID +# portion of the mib to the EXEC-COMMAND. +# +# Note: You'll have to change the path of the passtest script to your +# source directory or install it in the given location. +# +# Example: (see the script for details) +# (commented out here since it requires that you place the +# script in the right location. (its not installed by default)) + +# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/passtest + +# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.255 +# enterprises.ucdavis.255.1 = "life the universe and everything" +# enterprises.ucdavis.255.2.1 = 42 +# enterprises.ucdavis.255.2.2 = OID: 42.42.42 +# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42 +# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1 +# enterprises.ucdavis.255.5 = 42 +# enterprises.ucdavis.255.6 = Gauge: 42 +# +# % snmpget -v 1 -c public localhost .1.3.6.1.4.1.2021.255.5 +# enterprises.ucdavis.255.5 = 42 +# +# % snmpset -v 1 -c public localhost .1.3.6.1.4.1.2021.255.1 s "New string" +# enterprises.ucdavis.255.1 = "New string" +# + +# For specific usage information, see the man/snmpd.conf.5 manual page +# as well as the local/passtest script used in the above example. + +############################################################################### +# Subagent control +# + +# The agent can support subagents using a number of extension mechanisms. +# From the 4.2.1 release, AgentX support is being compiled in by default. +# However, this is still experimental code, so should not be used on +# critical production systems. +# Please see the file README.agentx for more details. +# +# If having read, marked, learnt and inwardly digested this information, +# you decide that you do wish to make use of this mechanism, simply +# uncomment the following directive. +# +# master agentx +# +# I repeat - this is *NOT* regarded as suitable for front-line production +# systems, though it is probably stable enough for day-to-day use. +# Probably. +# +# No refunds will be given. + +############################################################################### +# Further Information +# +# See the snmpd.conf manual page, and the output of "snmpd -H". +# MUCH more can be done with the snmpd.conf than is shown as an +# example here. diff --git a/recipes/net-snmp/files/snmptrapd.conf b/recipes/net-snmp/files/snmptrapd.conf new file mode 100644 index 0000000000..8d2e4375ef --- /dev/null +++ b/recipes/net-snmp/files/snmptrapd.conf @@ -0,0 +1,18 @@ +############################################################################### +# +# EXAMPLE.conf: +# An example configuration file for configuring the ucd-snmp snmptrapd agent. +# +############################################################################### +# +# This file is intended to only be an example. If, however, you want +# to use it, it should be placed in /etc/snmp/snmptrapd.conf. +# When the snmptrapd agent starts up, this is where it will look for it. +# +# All lines beginning with a '#' are comments and are intended for you +# to read. All other lines are configuration commands for the agent. + +# +# PLEASE: read the snmptrapd.conf(5) manual page as well! +# + diff --git a/recipes/net-snmp/files/uclibc-fix.patch b/recipes/net-snmp/files/uclibc-fix.patch new file mode 100644 index 0000000000..7109798e14 --- /dev/null +++ b/recipes/net-snmp/files/uclibc-fix.patch @@ -0,0 +1,11 @@ +--- net-snmp-5.1.2/config.sub.orig 2005-10-28 22:43:40.228326250 +0100 ++++ net-snmp-5.1.2/config.sub 2005-10-28 22:43:55.565284750 +0100 +@@ -118,7 +118,7 @@ + # Here we must recognize all the valid KERNEL-OS combinations. + maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` + case $maybe_os in +- nto-qnx* | linux-gnu* | freebsd*-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*) ++ nto-qnx* | linux-gnu* | linux-uclibc* | freebsd*-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; diff --git a/recipes/net-snmp/net-snmp-5.4.1/configure-tail.patch b/recipes/net-snmp/net-snmp-5.4.1/configure-tail.patch new file mode 100644 index 0000000000..89f9309535 --- /dev/null +++ b/recipes/net-snmp/net-snmp-5.4.1/configure-tail.patch @@ -0,0 +1,99 @@ +diff -urN net-snmp-5.4.1-orig/acinclude.m4 net-snmp-5.4.1-patched/acinclude.m4 +--- net-snmp-5.4.1-orig/acinclude.m4 2006-08-15 05:25:49.000000000 +0200 ++++ net-snmp-5.4.1-patched/acinclude.m4 2007-08-14 13:22:13.000000000 +0200 +@@ -39,7 +39,7 @@ + dnl + AC_DEFUN([AC_PROMPT_USER], + [ +-MSG_CHECK=`echo "$2" | tail -1` ++MSG_CHECK=`echo "$2" | tail -n 1` + AC_CACHE_CHECK($MSG_CHECK, ac_cv_user_prompt_$1, + [echo "" >&AC_FD_MSG + AC_PROMPT_USER_NO_DEFINE($1,[$2],$3) +diff -urN net-snmp-5.4.1-orig/configure net-snmp-5.4.1-patched/configure +--- net-snmp-5.4.1-orig/configure 2007-07-27 19:04:19.000000000 +0200 ++++ net-snmp-5.4.1-patched/configure 2007-08-14 13:22:13.000000000 +0200 +@@ -26417,7 +26417,7 @@ + # hpux make (at least) doesn't like a trailing \ on the last + # line even when the next line contains nothing but + # whitespace. +- lasttoken=`tail -1 mk/$i.mk | awk '{print $1}'` ++ lasttoken=`tail -n 1 mk/$i.mk | awk '{print $1}'` + sed "s#$lasttoken \\\\#$lasttoken#" < mk/$i.mk > mk/$i.mk.tmp + mv mk/$i.mk.tmp mk/$i.mk + +@@ -48793,7 +48793,7 @@ + + ME=`$WHOAMI` + if test -f /etc/resolv.conf; then +- LOC=`cat /etc/resolv.conf | grep '^domain' | tail -1 | awk '{print $NF}'` ++ LOC=`cat /etc/resolv.conf | grep '^domain' | tail -n 1 | awk '{print $NF}'` + else + LOC="@no.where" + fi +@@ -48819,7 +48819,7 @@ + Providing the --with-default-snmp-version=\"x\" parameter to ./configure + will avoid this prompt. + +-Default version of SNMP to use" | tail -1` ++Default version of SNMP to use" | tail -n 1` + echo "$as_me:$LINENO: checking $MSG_CHECK" >&5 + echo $ECHO_N "checking $MSG_CHECK... $ECHO_C" >&6 + if test "${ac_cv_user_prompt_NETSNMP_DEFAULT_SNMP_VERSION+set}" = set; then +@@ -48903,7 +48903,7 @@ + Providing the --with-sys-contact=\"contact\" parameter to ./configure + will avoid this prompt. + +-System Contact Information" | tail -1` ++System Contact Information" | tail -n 1` + echo "$as_me:$LINENO: checking $MSG_CHECK" >&5 + echo $ECHO_N "checking $MSG_CHECK... $ECHO_C" >&6 + if test "${ac_cv_user_prompt_NETSNMP_SYS_CONTACT+set}" = set; then +@@ -48967,7 +48967,7 @@ + Providing the --with-sys-location=\"location\" parameter to ./configure + will avoid this prompt. + +-System Location" | tail -1` ++System Location" | tail -n 1` + echo "$as_me:$LINENO: checking $MSG_CHECK" >&5 + echo $ECHO_N "checking $MSG_CHECK... $ECHO_C" >&6 + if test "${ac_cv_user_prompt_NETSNMP_SYS_LOC+set}" = set; then +@@ -49037,7 +49037,7 @@ + Providing the --with-logfile=\"path\" parameter to ./configure + will avoid this prompt. + +-Location to write logfile" | tail -1` ++Location to write logfile" | tail -n 1` + echo "$as_me:$LINENO: checking $MSG_CHECK" >&5 + echo $ECHO_N "checking $MSG_CHECK... $ECHO_C" >&6 + if test "${ac_cv_user_prompt_NETSNMP_LOGFILE+set}" = set; then +@@ -49114,7 +49114,7 @@ + Providing the --with-persistent-directory=\"path\" parameter to + ./configure will avoid this prompt. + +-Location to write persistent information" | tail -1` ++Location to write persistent information" | tail -n 1` + echo "$as_me:$LINENO: checking $MSG_CHECK" >&5 + echo $ECHO_N "checking $MSG_CHECK... $ECHO_C" >&6 + if test "${ac_cv_user_prompt_NETSNMP_PERSISTENT_DIRECTORY+set}" = set; then +diff -urN net-snmp-5.4.1-orig/configure.in net-snmp-5.4.1-patched/configure.in +--- net-snmp-5.4.1-orig/configure.in 2007-07-27 19:02:00.000000000 +0200 ++++ net-snmp-5.4.1-patched/configure.in 2007-08-14 13:22:13.000000000 +0200 +@@ -2465,7 +2465,7 @@ + # hpux make (at least) doesn't like a trailing \ on the last + # line even when the next line contains nothing but + # whitespace. +- lasttoken=`tail -1 mk/$i.mk | awk '{print $1}'` ++ lasttoken=`tail -n 1 mk/$i.mk | awk '{print $1}'` + sed "s#$lasttoken \\\\#$lasttoken#" < mk/$i.mk > mk/$i.mk.tmp + mv mk/$i.mk.tmp mk/$i.mk + +@@ -4575,7 +4575,7 @@ + + ME=`$WHOAMI` + if test -f /etc/resolv.conf; then +- LOC=`cat /etc/resolv.conf | grep '^domain' | tail -1 | awk '{print $NF}'` ++ LOC=`cat /etc/resolv.conf | grep '^domain' | tail -n 1 | awk '{print $NF}'` + else + LOC="@no.where" + fi diff --git a/recipes/net-snmp/net-snmp.inc b/recipes/net-snmp/net-snmp.inc new file mode 100644 index 0000000000..bbe809696e --- /dev/null +++ b/recipes/net-snmp/net-snmp.inc @@ -0,0 +1,97 @@ +DESCRIPTION = "Various tools relating to the Simple Network Management Protocol" +HOMEPAGE = "http://www.net-snmp.org/" +LICENSE = "BSD" +DEPENDS = "openssl" +RDEPENDS_${PN}-server += "net-snmp-mibs" +RDEPENDS_${PN}-client += "net-snmp-mibs" +RDEPENDS_${PN}-dev = "net-snmp-client (= ${EXTENDPV}) net-snmp-server (= ${EXTENDPV})" +RRECOMMENDS_${PN}-dbg = "net-snmp-client (= ${EXTENDPV}) net-snmp-server (= ${EXTENDPV})" + +inherit autotools update-rc.d + + +do_configure() { + # Additional flag based on target endiness (see siteinfo.bbclass) + ENDIANESS="${@base_conditional('SITEINFO_ENDIANESS', 'le', '--with-endianness=little', '--with-endianness=big', d)}" + oenote Determined endianess as: $ENDIANESS + oe_runconf $ENDIANESS +} + +do_install_append() { + install -d ${D}${sysconfdir}/snmp + install -d ${D}${sysconfdir}/init.d + install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/snmpd + install -m 644 ${WORKDIR}/snmpd.conf ${D}${sysconfdir}/snmp/ + install -m 644 ${WORKDIR}/snmptrapd.conf ${D}${sysconfdir}/snmp/ +} + +do_stage() { + rm -rf ${STAGE_TEMP} + mkdir -p ${STAGE_TEMP} + oe_runmake INSTALL_PREFIX="${STAGE_TEMP}" install + autotools_stage_dir ${STAGE_TEMP}/${includedir} ${STAGING_INCDIR} + if [ -d ${STAGE_TEMP}/${libdir} ] + then + olddir=`pwd` + cd ${STAGE_TEMP}/${libdir} + las=$(find . -name \*.la -type f) + cd $olddir + echo "Found la files: $las" + for i in $las + do + sed -e 's/^installed=yes$/installed=no/' \ + -e '/^dependency_libs=/s,${WORKDIR}[[:alnum:]/\._+-]*/\([[:alnum:]\._+-]*\),${STAGING_LIBDIR}/\1,g' \ + -e "/^dependency_libs=/s,\([[:space:]']\)${libdir},\1${STAGING_LIBDIR},g" \ + -i ${STAGE_TEMP}/${libdir}/$i + done + autotools_stage_dir ${STAGE_TEMP}/${libdir} ${STAGING_LIBDIR} + fi + install -d ${STAGING_DIR_HOST}${layout_bindir} + sed -e "s@-I/usr/include@@g" \ + -e "s@^prefix=.*@prefix=${STAING_DIR_HOST}@g" \ + -e "s@^exec_prefix=.*@exec_prefix=${STAING_DIR_HOST}@g" \ + -e "s@^includedir=.*@includedir=${STAGING_INCDIR}@g" \ + -e "s@^libdir=.*@libdir=${STAGING_LIBDIR}@g" \ + -i net-snmp-config + + install -m 755 net-snmp-config ${STAGING_DIR_HOST}${layout_bindir} + rm -Rf ${STAGE_TEMP} +} + +PACKAGES = "net-snmp-dbg net-snmp-doc net-snmp-dev net-snmp-libs \ + net-snmp-mibs net-snmp-server net-snmp-client" + +FILES_${PN}-libs = "${libdir}/*" +FILES_${PN}-mibs = "${datadir}/snmp/mibs" +FILES_${PN}-server = "${sbindir}/* ${sysconfdir}" +FILES_${PN}-client = "${bindir}/* ${datadir}/snmp/" +FILES_${PN}-dbg += "${libdir}/.debug/ ${sbindir}/.debug/ ${bindir}/.debug/" +FILES_${PN}-dev += ${bindir}/net-snmp-config ${bindir}/mib2c ${bindir}/mib2c-update" + +CONFFILES_${PN}-server = "${sysconfdir}/snmp/snmpd.conf \ + ${sysconfdir}/snmp/snmptrapd.conf" + +INITSCRIPT_PACKAGES = "${PN}-server" +INITSCRIPT_NAME_${PN}-server = "snmpd" +INITSCRIPT_PARAMS_${PN}-server = "defaults" + +LEAD_SONAME = "libnetsnmp.so" + +pkg_postinst_net-snmp-server() { +if test "x$D" != "x"; then + D="-r $D" +else + D="-s" +fi +update-rc.d $D snmpd defaults +} + +pkg_postrm_net-snmp-server() { +if test "x$D" != "x"; then + D="-r $D" +else + /etc/init.d/snmpd stop +fi +update-rc.d $D snmpd remove +} + diff --git a/recipes/net-snmp/net-snmp_5.1.2.bb b/recipes/net-snmp/net-snmp_5.1.2.bb new file mode 100644 index 0000000000..527c9e33b1 --- /dev/null +++ b/recipes/net-snmp/net-snmp_5.1.2.bb @@ -0,0 +1,18 @@ +require net-snmp.inc +PR = "r4" + +SRC_URI = "${SOURCEFORGE_MIRROR}/net-snmp/net-snmp-${PV}.tar.gz \ + file://uclibc-fix.patch;patch=1 \ + file://init \ + file://snmpd.conf \ + file://snmptrapd.conf" + +inherit autotools + +PARALLEL_MAKE = "" +EXTRA_OECONF = "--enable-shared --disable-manuals --with-defaults" +EXTRA_OEMAKE = "INSTALL_PREFIX=${D}" + +CONFFILES_${PN}_nylon = "${sysconfdir}/snmp/snmpd.conf ${sysconfdir}/snmp/snmptrapd.conf" +CCACHE = "" + diff --git a/recipes/net-snmp/net-snmp_5.4.1.bb b/recipes/net-snmp/net-snmp_5.4.1.bb new file mode 100644 index 0000000000..f76005b435 --- /dev/null +++ b/recipes/net-snmp/net-snmp_5.4.1.bb @@ -0,0 +1,20 @@ +require net-snmp.inc +PR = "r2" + +SRC_URI = "${SOURCEFORGE_MIRROR}/net-snmp/net-snmp-${PV}.tar.gz \ + file://configure-tail.patch;patch=1 \ + file://init \ + file://snmpd.conf \ + file://snmptrapd.conf" + +EXTRA_OECONF = "--enable-shared --disable-manuals --with-defaults \ + --disable-embedded-perl --with-perl-modules=no" +EXTRA_OEMAKE = "INSTALL_PREFIX=${D}" + +do_configure_prepend() { + libtoolize --force +} + +PARALLEL_MAKE = "" +CCACHE = "" + diff --git a/recipes/net-snmp/net-snmp_svn.bb b/recipes/net-snmp/net-snmp_svn.bb new file mode 100644 index 0000000000..2f82865aaa --- /dev/null +++ b/recipes/net-snmp/net-snmp_svn.bb @@ -0,0 +1,27 @@ +require net-snmp.inc +DEPENDS += "libtool libtool-native libtool-cross" + +PR = "r3" +S = "${WORKDIR}/net-snmp" + +SRC_URI = "svn://net-snmp.svn.sourceforge.net/svnroot/net-snmp/trunk;rev=17367;module=net-snmp;proto=https \ + file://init \ + file://snmpd.conf \ + file://snmptrapd.conf" + +EXTRA_OECONF = "--enable-shared --disable-manuals --with-defaults \ + --disable-embedded-perl --with-perl-modules=no GREP=/bin/grep SED=/bin/sed" +EXTRA_OEMAKE = "INSTALL_PREFIX=${D}" + +PARALLEL_MAKE = "" +CCACHE = "" + +do_configure_prepend() { + gnu-configize -f + # We better change sources and re-autoconf here, but + # required autoconf is too new for us. + sed -e '/echo.*\".*\\\\.*\"/s/echo/echo -e/g' \ + -e 's/tail -1/tail -n 1/g' \ + -i configure +} + -- cgit v1.2.3