From 9f601f09c8b4ca7c294db17ae14ea01e269d7f05 Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Wed, 23 Sep 2009 14:16:50 +0200 Subject: linux-omap 2.6.31: move to a later SRCREV that has more paches applied --- recipes/linux/linux-omap-2.6.31/fix-omapfb.patch | 137 ------ .../0001-ARM-OMAP-Fix-beagleboard-EHCI-setup.patch | 37 ++ .../usb/0002-ehci-fix-ehci-pin-mux-init.patch | 206 --------- ...ci-adding-mux-pin-for-EHCI-phy-reset-line.patch | 42 -- ...-correct-EHCI-init-parameters-on-OMAP3EVM.patch | 34 -- ...005-ehci-fix-phy_reset-init-in-ehci-probe.patch | 35 -- ...ehci-increase-timeout-to-fix-ehci-failure.patch | 30 -- .../usb/0007-ehci-portwise-configurations.patch | 498 --------------------- .../usb/0009-ehci-Support-for-ES3.x.patch | 170 ------- ...10-ehci-update-driver-with-generic-change.patch | 31 -- recipes/linux/linux-omap_2.6.31.bb | 12 +- 11 files changed, 39 insertions(+), 1193 deletions(-) delete mode 100644 recipes/linux/linux-omap-2.6.31/fix-omapfb.patch create mode 100644 recipes/linux/linux-omap-2.6.31/usb/0001-ARM-OMAP-Fix-beagleboard-EHCI-setup.patch delete mode 100644 recipes/linux/linux-omap-2.6.31/usb/0002-ehci-fix-ehci-pin-mux-init.patch delete mode 100644 recipes/linux/linux-omap-2.6.31/usb/0003-ehci-adding-mux-pin-for-EHCI-phy-reset-line.patch delete mode 100644 recipes/linux/linux-omap-2.6.31/usb/0004-ehci-correct-EHCI-init-parameters-on-OMAP3EVM.patch delete mode 100644 recipes/linux/linux-omap-2.6.31/usb/0005-ehci-fix-phy_reset-init-in-ehci-probe.patch delete mode 100644 recipes/linux/linux-omap-2.6.31/usb/0006-ehci-increase-timeout-to-fix-ehci-failure.patch delete mode 100644 recipes/linux/linux-omap-2.6.31/usb/0007-ehci-portwise-configurations.patch delete mode 100644 recipes/linux/linux-omap-2.6.31/usb/0009-ehci-Support-for-ES3.x.patch delete mode 100644 recipes/linux/linux-omap-2.6.31/usb/0010-ehci-update-driver-with-generic-change.patch (limited to 'recipes/linux') diff --git a/recipes/linux/linux-omap-2.6.31/fix-omapfb.patch b/recipes/linux/linux-omap-2.6.31/fix-omapfb.patch deleted file mode 100644 index 6658bceb12..0000000000 --- a/recipes/linux/linux-omap-2.6.31/fix-omapfb.patch +++ /dev/null @@ -1,137 +0,0 @@ -From linux-omap-owner@vger.kernel.org Sat Sep 12 18:36:17 2009 -Received: from localhost - ([127.0.0.1] helo=dominion ident=koen) - by dominion.dominion.void with esmtp (Exim 4.69) - (envelope-from ) - id 1MmVaD-0005nl-6f - for koen@localhost; Sat, 12 Sep 2009 18:36:17 +0200 -Received: from xs.service.utwente.nl [130.89.5.250] - by dominion with POP3 (fetchmail-6.3.9-rc2) - for (single-drop); Sat, 12 Sep 2009 18:36:17 +0200 (CEST) -Received: from mail.service.utwente.nl ([130.89.5.254]) by exchange.service.utwente.nl with Microsoft SMTPSVC(6.0.3790.3959); - Sat, 12 Sep 2009 18:34:31 +0200 -Received: from mx.utwente.nl ([130.89.2.13]) by mail.service.utwente.nl with Microsoft SMTPSVC(6.0.3790.3959); - Sat, 12 Sep 2009 18:34:31 +0200 -Received: from vger.kernel.org (vger.kernel.org [209.132.176.167]) - by mx.utwente.nl (8.12.10/SuSE Linux 0.7) with ESMTP id n8CGYLR7001279 - for ; Sat, 12 Sep 2009 18:34:22 +0200 -Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand - id S1754253AbZILQeP (ORCPT ); - Sat, 12 Sep 2009 12:34:15 -0400 -Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754362AbZILQeP - (ORCPT ); - Sat, 12 Sep 2009 12:34:15 -0400 -Received: from fg-out-1718.google.com ([72.14.220.157]:62107 "EHLO - fg-out-1718.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org - with ESMTP id S1754253AbZILQeO (ORCPT - ); Sat, 12 Sep 2009 12:34:14 -0400 -Received: by fg-out-1718.google.com with SMTP id 22so194962fge.1 - for ; Sat, 12 Sep 2009 09:34:17 -0700 (PDT) -DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; - d=gmail.com; s=gamma; - h=domainkey-signature:received:received:sender:from:to:cc:subject - :date:message-id:x-mailer; - bh=AAXJA19IlSONsCjIPh2mme+ulWCBhEJbyCxyyJZk4jY=; - b=CENOacQ7/T2g5eQKy8wvo7vClGTIOU0xNgsYWpcBl2GAwrVooMvJRMWImFJYSEaU9r - wZTrSIouwCoeC5J2yZII6kezDggm44Nj1eA8S+c9Hj/SSt6oU1Jqc9Ttvn7jS2SxC47i - 0QMLWTjaRyCHVy8jfQtObilIeTnBjDMU70FkE= -DomainKey-Signature: a=rsa-sha1; c=nofws; - d=gmail.com; s=gamma; - h=sender:from:to:cc:subject:date:message-id:x-mailer; - b=TVKZoERoRk1PULFXvIXEWvDKkUb/E37Cni4zLjE4PU+5bT/zGL4a+NSkifrRx5w3ku - X7DR9Zc5c1NIJ0mhR5kCk6fZ6Yjp1vwo6tmzvZB9Dcy6AxWumrzjBte2EdW1Lw1l1URf - /QDALV74V+WT4Etn+yPAlt6Zd7WbgVcqCSEc4= -Received: by 10.87.42.14 with SMTP id u14mr3277117fgj.28.1252773257105; - Sat, 12 Sep 2009 09:34:17 -0700 (PDT) -Received: from localhost ([95.87.222.103]) - by mx.google.com with ESMTPS id 4sm1764938fge.4.2009.09.12.09.34.12 - (version=TLSv1/SSLv3 cipher=RC4-MD5); - Sat, 12 Sep 2009 09:34:13 -0700 (PDT) -From: Sergio Aguirre -To: Imre Deak -Cc: linux-fbdev-devel@lists.sourceforge.net, linux-omap@vger.kernel.org, - Sergio Aguirre -Subject: [PATCH] omapfb: Reorder Register_framebuffer call -Date: Sat, 12 Sep 2009 19:34:09 +0300 -Message-Id: <1252773249-24444-1-git-send-email-saaguirre@ti.com> -X-Mailer: git-send-email 1.6.4.2 -Sender: linux-omap-owner@vger.kernel.org -Precedence: bulk -List-ID: -X-Mailing-List: linux-omap@vger.kernel.org -X-UTwente-MailScanner-Information: Scanned by MailScanner. Contact icts.servicedesk@utwente.nl for more information. -X-UTwente-MailScanner: Found to be clean -X-UTwente-MailScanner-From: linux-omap-owner@vger.kernel.org -X-Spam-Status: No -X-OriginalArrivalTime: 12 Sep 2009 16:34:31.0630 (UTC) FILETIME=[E7A3E6E0:01CA33C6] - -This fixes the issue in which mm_lock mutex was attempted to be -used without initializing previously. - -Thanks to the testers! - - OMAP3430 SDP (Anand Gadiyar) - - OMAP3530 EVM (Vaibhav Hiremath) - - LogicPD's OMAP boards (Peter Brada) - - Beagleboard Rev. C2 (Eric Witcher) - -Signed-off-by: Sergio Aguirre -Tested-by: Vaibhav Hiremath -Tested-by: Anand Gadiyar -Tested-by: Peter Barada -Tested-by: Eric Witcher ---- - drivers/video/omap/omapfb_main.c | 20 +++++++++++--------- - 1 files changed, 11 insertions(+), 9 deletions(-) - -diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c -index 125e605..60f9482 100644 ---- a/drivers/video/omap/omapfb_main.c -+++ b/drivers/video/omap/omapfb_main.c -@@ -1503,12 +1503,21 @@ static int fbinfo_init(struct omapfb_device *fbdev, struct fb_info *info) - var->rotate = def_rotate; - var->bits_per_pixel = fbdev->panel->bpp; - -+ r = register_framebuffer(info); -+ if (r != 0) { -+ dev_err(fbdev->dev, -+ "registering framebuffer failed\n"); -+ return r; -+ } -+ - set_fb_var(info, var); - set_fb_fix(info); - - r = fb_alloc_cmap(&info->cmap, 16, 0); -- if (r != 0) -+ if (r != 0) { - dev_err(fbdev->dev, "unable to allocate color map memory\n"); -+ unregister_framebuffer(info); -+ } - - return r; - } -@@ -1773,15 +1782,8 @@ static int omapfb_do_probe(struct platform_device *pdev, - init_state++; - - vram = 0; -- for (i = 0; i < fbdev->mem_desc.region_cnt; i++) { -- r = register_framebuffer(fbdev->fb_info[i]); -- if (r != 0) { -- dev_err(fbdev->dev, -- "registering framebuffer %d failed\n", i); -- goto cleanup; -- } -+ for (i = 0; i < fbdev->mem_desc.region_cnt; i++) - vram += fbdev->mem_desc.region[i].size; -- } - - fbdev->state = OMAPFB_ACTIVE; - --- -1.6.3.2 - --- -To unsubscribe from this list: send the line "unsubscribe linux-omap" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html - diff --git a/recipes/linux/linux-omap-2.6.31/usb/0001-ARM-OMAP-Fix-beagleboard-EHCI-setup.patch b/recipes/linux/linux-omap-2.6.31/usb/0001-ARM-OMAP-Fix-beagleboard-EHCI-setup.patch new file mode 100644 index 0000000000..ecd37f78a9 --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0001-ARM-OMAP-Fix-beagleboard-EHCI-setup.patch @@ -0,0 +1,37 @@ +From 416c7ba6ec7041dc4d61340adf73c9467ff8073a Mon Sep 17 00:00:00 2001 +From: Koen Kooi +Date: Wed, 23 Sep 2009 09:35:15 +0200 +Subject: [PATCH] ARM: OMAP: Fix beagleboard EHCI setup + +The EHCI configuration in the beagleboard board file was copy/pasted +from the sdp one and hence wrong. The beagleboard only used one port +and lacks a charge pump. + +Tested on revision C1D and C3 boards + +Signed-off-by: Koen Kooi +--- + arch/arm/mach-omap2/board-omap3beagle.c | 6 +++--- + 1 files changed, 3 insertions(+), 3 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index 496b4a0..aa403e6 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -406,10 +406,10 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + +- .chargepump = true, ++ .chargepump = false, + .phy_reset = true, +- .reset_gpio_port[0] = 57, +- .reset_gpio_port[1] = 61, ++ .reset_gpio_port[0] = -EINVAL, ++ .reset_gpio_port[1] = 147, + .reset_gpio_port[2] = -EINVAL + }; + +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap-2.6.31/usb/0002-ehci-fix-ehci-pin-mux-init.patch b/recipes/linux/linux-omap-2.6.31/usb/0002-ehci-fix-ehci-pin-mux-init.patch deleted file mode 100644 index 82e4c1edb0..0000000000 --- a/recipes/linux/linux-omap-2.6.31/usb/0002-ehci-fix-ehci-pin-mux-init.patch +++ /dev/null @@ -1,206 +0,0 @@ -From 9c6a05af8f862025f5187a2f37be87db39ae709f Mon Sep 17 00:00:00 2001 -From: Ajay Kumar Gupta -Date: Fri, 3 Jul 2009 15:55:24 +0530 -Subject: [PATCH 02/16] ehci: fix ehci pin mux init - -EHCI pin mux init fucntion is still using old #ifdef which are not defined -anymore.This causes pin mux init to always set TLL settings and thus EHCI -PHY mode doesn't work. - -Fixing this issue by using phy_mode parameter to initialize mux settings. - -Signed-off-by: Ajay Kumar Gupta -Signed-off-by: Felipe Balbi ---- - arch/arm/mach-omap2/usb-ehci.c | 167 ++++++++++++++++++++-------------------- - 1 files changed, 83 insertions(+), 84 deletions(-) - -diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c -index 56fc7f4..6a96569 100644 ---- a/arch/arm/mach-omap2/usb-ehci.c -+++ b/arch/arm/mach-omap2/usb-ehci.c -@@ -68,90 +68,89 @@ static struct platform_device ehci_device = { - /* - * setup_ehci_io_mux - initialize IO pad mux for USBHOST - */ --static void setup_ehci_io_mux(void) -+static void setup_ehci_io_mux(enum ehci_hcd_omap_mode phy_mode) - { --#ifdef CONFIG_OMAP_EHCI_PHY_MODE -- /* PHY mode of operation for board: 750-2083-001 -- * ISP1504 connected to Port1 and Port2 -- * Do Func Mux setting for 12-pin ULPI PHY mode -- */ -- -- /* Port1 */ -- omap_cfg_reg(Y9_3430_USB1HS_PHY_STP); -- omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK); -- omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR); -- omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT); -- omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0); -- omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1); -- omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2); -- omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3); -- omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4); -- omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5); -- omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6); -- omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7); -- -- /* Port2 */ -- omap_cfg_reg(AA10_3430_USB2HS_PHY_STP); -- omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK); -- omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR); -- omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT); -- omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0); -- omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1); -- omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2); -- omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3); -- omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4); -- omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5); -- omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6); -- omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7); -- --#else -- /* Set Func mux for : -- * TLL mode of operation -- * 12-pin ULPI SDR TLL mode for Port1/2/3 -- */ -- -- /* Port1 */ -- omap_cfg_reg(Y9_3430_USB1HS_TLL_STP); -- omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK); -- omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR); -- omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT); -- omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0); -- omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1); -- omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2); -- omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3); -- omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4); -- omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5); -- omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6); -- omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7); -- -- /* Port2 */ -- omap_cfg_reg(AA10_3430_USB2HS_TLL_STP); -- omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK); -- omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR); -- omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT); -- omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0); -- omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1); -- omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2); -- omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3); -- omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4); -- omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5); -- omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6); -- omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7); -- -- /* Port3 */ -- omap_cfg_reg(AB3_3430_USB3HS_TLL_STP); -- omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK); -- omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR); -- omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT); -- omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0); -- omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1); -- omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2); -- omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3); -- omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4); -- omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5); -- omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6); -- omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7); --#endif /* CONFIG_OMAP_EHCI_PHY_MODE */ -+ if (phy_mode == EHCI_HCD_OMAP_MODE_PHY) { -+ /* PHY mode of operation for board: 750-2083-001 -+ * ISP1504 connected to Port1 and Port2 -+ * Do Func Mux setting for 12-pin ULPI PHY mode -+ */ -+ /* Port1 */ -+ omap_cfg_reg(Y9_3430_USB1HS_PHY_STP); -+ omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK); -+ omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR); -+ omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT); -+ omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0); -+ omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1); -+ omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2); -+ omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3); -+ omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4); -+ omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5); -+ omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6); -+ omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7); -+ -+ /* Port2 */ -+ omap_cfg_reg(AA10_3430_USB2HS_PHY_STP); -+ omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK); -+ omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR); -+ omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT); -+ omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0); -+ omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1); -+ omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2); -+ omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3); -+ omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4); -+ omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5); -+ omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6); -+ omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7); -+ -+ } else { -+ /* Set Func mux for : -+ * TLL mode of operation -+ * 12-pin ULPI SDR TLL mode for Port1/2/3 -+ */ -+ -+ /* Port1 */ -+ omap_cfg_reg(Y9_3430_USB1HS_TLL_STP); -+ omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK); -+ omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR); -+ omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT); -+ omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0); -+ omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1); -+ omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2); -+ omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3); -+ omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4); -+ omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5); -+ omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6); -+ omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7); -+ -+ /* Port2 */ -+ omap_cfg_reg(AA10_3430_USB2HS_TLL_STP); -+ omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK); -+ omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR); -+ omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT); -+ omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0); -+ omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1); -+ omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2); -+ omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3); -+ omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4); -+ omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5); -+ omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6); -+ omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7); -+ -+ /* Port3 */ -+ omap_cfg_reg(AB3_3430_USB3HS_TLL_STP); -+ omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK); -+ omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR); -+ omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT); -+ omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0); -+ omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1); -+ omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2); -+ omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3); -+ omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4); -+ omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5); -+ omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6); -+ omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7); -+ } - - return; - } -@@ -172,7 +171,7 @@ void __init usb_ehci_init(enum ehci_hcd_omap_mode phy_mode, - - /* Setup Pin IO MUX for EHCI */ - if (cpu_is_omap34xx()) -- setup_ehci_io_mux(); -+ setup_ehci_io_mux(phy_mode); - - if (platform_device_register(&ehci_device) < 0) { - printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); --- -1.6.2.4 - diff --git a/recipes/linux/linux-omap-2.6.31/usb/0003-ehci-adding-mux-pin-for-EHCI-phy-reset-line.patch b/recipes/linux/linux-omap-2.6.31/usb/0003-ehci-adding-mux-pin-for-EHCI-phy-reset-line.patch deleted file mode 100644 index e740614864..0000000000 --- a/recipes/linux/linux-omap-2.6.31/usb/0003-ehci-adding-mux-pin-for-EHCI-phy-reset-line.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 2f0fe550c81056cb22c0cb8bf54c464e313e1047 Mon Sep 17 00:00:00 2001 -From: Ajay Kumar Gupta -Date: Mon, 6 Jul 2009 12:46:08 +0530 -Subject: [PATCH 03/16] ehci: adding mux pin for EHCI phy reset line - -GPIO135 is used as EHCI (port2) phy reset pin on Multi Media Daughter card -connected to OMAP3EVM. - -Signed-off-by: Ajay Kumar Gupta ---- - arch/arm/mach-omap2/mux.c | 2 ++ - arch/arm/plat-omap/include/mach/mux.h | 1 + - 2 files changed, 3 insertions(+), 0 deletions(-) - -diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c -index 2daa595..339ba80 100644 ---- a/arch/arm/mach-omap2/mux.c -+++ b/arch/arm/mach-omap2/mux.c -@@ -472,6 +472,8 @@ MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) - MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -+MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162, -+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) - MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) - MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c, -diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h -index 98dfab6..4bcf8a5 100644 ---- a/arch/arm/plat-omap/include/mach/mux.h -+++ b/arch/arm/plat-omap/include/mach/mux.h -@@ -846,6 +846,7 @@ enum omap34xx_index { - L8_34XX_GPIO63, - G25_34XX_GPIO86_OUT, - AG4_34XX_GPIO134_OUT, -+ AF4_34XX_GPIO135_OUT, - AE4_34XX_GPIO136_OUT, - AF6_34XX_GPIO140_UP, - AE6_34XX_GPIO141, --- -1.6.2.4 - diff --git a/recipes/linux/linux-omap-2.6.31/usb/0004-ehci-correct-EHCI-init-parameters-on-OMAP3EVM.patch b/recipes/linux/linux-omap-2.6.31/usb/0004-ehci-correct-EHCI-init-parameters-on-OMAP3EVM.patch deleted file mode 100644 index 65bb871682..0000000000 --- a/recipes/linux/linux-omap-2.6.31/usb/0004-ehci-correct-EHCI-init-parameters-on-OMAP3EVM.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 4cc29612d5a706049b14e67bcc3b22490bdddcf7 Mon Sep 17 00:00:00 2001 -From: Ajay Kumar Gupta -Date: Fri, 10 Jul 2009 10:01:39 +0530 -Subject: [PATCH 04/16] ehci: correct EHCI init parameters on OMAP3EVM - -Multimedia Daughter card on OMAP3EVM uses port2 as EHCI port. -Other ports (port1 and port3)are not used. - -GPIO135 has been used as EHCI phy reset pin so the mux config -is also setup. - -Signed-off-by: Ajay Kumar Gupta ---- - arch/arm/mach-omap2/board-omap3evm.c | 4 +++- - 1 files changed, 3 insertions(+), 1 deletions(-) - -diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c -index 35f6075..18b747b 100644 ---- a/arch/arm/mach-omap2/board-omap3evm.c -+++ b/arch/arm/mach-omap2/board-omap3evm.c -@@ -308,7 +308,9 @@ static void __init omap3_evm_init(void) - usb_nop_xceiv_register(); - #endif - usb_musb_init(); -- usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, true, true, 57, 61); -+ /* Setup EHCI phy reset padconfig */ -+ omap_cfg_reg(AF4_34XX_GPIO135_OUT); -+ usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, false, true, -EINVAL, 135); - ads7846_dev_init(); - } - --- -1.6.2.4 - diff --git a/recipes/linux/linux-omap-2.6.31/usb/0005-ehci-fix-phy_reset-init-in-ehci-probe.patch b/recipes/linux/linux-omap-2.6.31/usb/0005-ehci-fix-phy_reset-init-in-ehci-probe.patch deleted file mode 100644 index 07f9386170..0000000000 --- a/recipes/linux/linux-omap-2.6.31/usb/0005-ehci-fix-phy_reset-init-in-ehci-probe.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 42c413f8f9005a5ca109f82baff81f8e400b8854 Mon Sep 17 00:00:00 2001 -From: Ajay Kumar Gupta -Date: Mon, 13 Jul 2009 14:10:46 +0530 -Subject: [PATCH 05/16] ehci: fix phy_reset init in ehci probe - -phy_reset is not getting updated from platform_data. - -Signed-off-by: Ajay Kumar Gupta ---- - drivers/usb/host/ehci-omap.c | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - -diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c -index 0058f03..55e5259 100644 ---- a/drivers/usb/host/ehci-omap.c -+++ b/drivers/usb/host/ehci-omap.c -@@ -33,7 +33,6 @@ - * - add suspend/resume - * - move workarounds to board-files - * - differentiate between ES2.x and ES3.x -- * - make it enumerate devices - */ - - #include -@@ -590,6 +589,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) - - platform_set_drvdata(pdev, omap); - omap->dev = &pdev->dev; -+ omap->phy_reset = pdata->phy_reset; - omap->reset_gpio_port1 = pdata->reset_gpio_port1; - omap->reset_gpio_port2 = pdata->reset_gpio_port2; - omap->phy_mode = pdata->phy_mode; --- -1.6.2.4 - diff --git a/recipes/linux/linux-omap-2.6.31/usb/0006-ehci-increase-timeout-to-fix-ehci-failure.patch b/recipes/linux/linux-omap-2.6.31/usb/0006-ehci-increase-timeout-to-fix-ehci-failure.patch deleted file mode 100644 index 1190aada1f..0000000000 --- a/recipes/linux/linux-omap-2.6.31/usb/0006-ehci-increase-timeout-to-fix-ehci-failure.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 4e499dd02940a567ca805010e9c3f78d8ab7bc79 Mon Sep 17 00:00:00 2001 -From: Ajay Kumar Gupta -Date: Mon, 6 Jul 2009 17:59:02 +0530 -Subject: [PATCH 06/16] ehci: increase timeout to fix ehci failure - -Sometime during TLL reset and waiting loop for TLL reset timeouts and thus -ehci init fails. Fixing this by increasing timeout value. - -Signed-off-by: Ajay Kumar Gupta -Signed-off-by: Felipe Balbi ---- - drivers/usb/host/ehci-omap.c | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - -diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c -index 55e5259..c7631f5 100644 ---- a/drivers/usb/host/ehci-omap.c -+++ b/drivers/usb/host/ehci-omap.c -@@ -244,7 +244,7 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask) - */ - static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) - { -- unsigned long timeout = jiffies + msecs_to_jiffies(100); -+ unsigned long timeout = jiffies + msecs_to_jiffies(1000); - unsigned reg = 0; - int ret = 0; - --- -1.6.2.4 - diff --git a/recipes/linux/linux-omap-2.6.31/usb/0007-ehci-portwise-configurations.patch b/recipes/linux/linux-omap-2.6.31/usb/0007-ehci-portwise-configurations.patch deleted file mode 100644 index 46258dac9b..0000000000 --- a/recipes/linux/linux-omap-2.6.31/usb/0007-ehci-portwise-configurations.patch +++ /dev/null @@ -1,498 +0,0 @@ -From 4d0b781b146ee79cee1208589498e8ac959d5796 Mon Sep 17 00:00:00 2001 -From: Ajay Kumar Gupta -Date: Thu, 13 Aug 2009 09:10:44 +0530 -Subject: [PATCH 07/16] ehci: portwise configurations - -OMAP3 EHCI has three ports and we can configure port modes -(PHY/TLL) on per port basis in silicon version ES3.0 onwards. - -This patch modifies the existing EHCI driver to accomodate -portwise mode configuration. - -Changes being done: - - - Pass platform_data pointer as parameter to usb_ehci_init() - to avoid multiple parameters. - - Use platform_data pointer in usb-ehci.c as platform_data - directly without copying it to another *pdata*. - - Initializing platform_data in all platform files with - platform specific ehci parameters. - - Added port_mode[OMAP_HS_USB_PORTS]in platform_data - structures.This allows to setup mux pins on per port basis. - - Added phy_reset_gpio[OMAP_HS_USB_PORTS]. - -Signed-off-by: Ajay Kumar Gupta ---- - arch/arm/mach-omap2/board-3430sdp.c | 15 +++++- - arch/arm/mach-omap2/board-omap3beagle.c | 15 +++++- - arch/arm/mach-omap2/board-omap3evm.c | 15 +++++- - arch/arm/mach-omap2/board-omap3pandora.c | 15 +++++- - arch/arm/mach-omap2/usb-ehci.c | 95 +++++++++++++++--------------- - arch/arm/plat-omap/include/mach/usb.h | 12 ++-- - drivers/usb/host/ehci-omap.c | 63 +++++++++++--------- - 7 files changed, 145 insertions(+), 85 deletions(-) - -diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c -index 439ebcc..f9fabb0 100644 ---- a/arch/arm/mach-omap2/board-3430sdp.c -+++ b/arch/arm/mach-omap2/board-3430sdp.c -@@ -480,6 +480,19 @@ static void enable_board_wakeup_source(void) - omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ - } - -+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { -+ -+ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, -+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, -+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, -+ -+ .chargepump = true, -+ .phy_reset = true, -+ .reset_gpio_port[0] = 57, -+ .reset_gpio_port[1] = 61, -+ .reset_gpio_port[2] = -EINVAL -+}; -+ - static void __init omap_3430sdp_init(void) - { - omap3430_i2c_init(); -@@ -495,8 +508,8 @@ static void __init omap_3430sdp_init(void) - omap_serial_init(); - usb_musb_init(); - board_smc91x_init(); -- usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, true, true, 57, 61); - enable_board_wakeup_source(); -+ usb_ehci_init(&ehci_pdata); - } - - static void __init omap_3430sdp_map_io(void) -diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c -index a661fe3..4109969 100644 ---- a/arch/arm/mach-omap2/board-omap3beagle.c -+++ b/arch/arm/mach-omap2/board-omap3beagle.c -@@ -395,6 +395,19 @@ static void __init omap3beagle_flash_init(void) - } - } - -+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { -+ -+ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, -+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, -+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, -+ -+ .chargepump = false, -+ .phy_reset = true, -+ .reset_gpio_port[0] = -EINVAL, -+ .reset_gpio_port[1] = 147, -+ .reset_gpio_port[2] = -EINVAL -+}; -+ - static void __init omap3_beagle_init(void) - { - omap3_beagle_i2c_init(); -@@ -408,7 +421,7 @@ static void __init omap3_beagle_init(void) - gpio_direction_output(170, true); - - usb_musb_init(); -- usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, true, true, 57, 61); -+ usb_ehci_init(&ehci_pdata); - omap3beagle_flash_init(); - - /* Ensure SDRC pins are mux'd for self-refresh */ -diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c -index 18b747b..62a6f32 100644 ---- a/arch/arm/mach-omap2/board-omap3evm.c -+++ b/arch/arm/mach-omap2/board-omap3evm.c -@@ -293,6 +293,19 @@ static struct platform_device *omap3_evm_devices[] __initdata = { - &omap3evm_smc911x_device, - }; - -+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { -+ -+ .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, -+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, -+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, -+ -+ .chargepump = false, -+ .phy_reset = true, -+ .reset_gpio_port[0] = -EINVAL, -+ .reset_gpio_port[1] = 135, -+ .reset_gpio_port[2] = -EINVAL -+}; -+ - static void __init omap3_evm_init(void) - { - omap3_evm_i2c_init(); -@@ -310,7 +323,7 @@ static void __init omap3_evm_init(void) - usb_musb_init(); - /* Setup EHCI phy reset padconfig */ - omap_cfg_reg(AF4_34XX_GPIO135_OUT); -- usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, false, true, -EINVAL, 135); -+ usb_ehci_init(&ehci_pdata); - ads7846_dev_init(); - } - -diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c -index c9d6488..9f115dc 100644 ---- a/arch/arm/mach-omap2/board-omap3pandora.c -+++ b/arch/arm/mach-omap2/board-omap3pandora.c -@@ -383,6 +383,19 @@ static struct platform_device *omap3pandora_devices[] __initdata = { - &pandora_keys_gpio, - }; - -+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { -+ -+ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, -+ .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, -+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, -+ -+ .chargepump = false, -+ .phy_reset = true, -+ .reset_gpio_port[0] = 16, -+ .reset_gpio_port[1] = -EINVAL, -+ .reset_gpio_port[2] = -EINVAL -+}; -+ - static void __init omap3pandora_init(void) - { - omap3pandora_i2c_init(); -@@ -392,7 +405,7 @@ static void __init omap3pandora_init(void) - spi_register_board_info(omap3pandora_spi_board_info, - ARRAY_SIZE(omap3pandora_spi_board_info)); - omap3pandora_ads7846_init(); -- usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, false, true, 16, -EINVAL); -+ usb_ehci_init(&ehci_pdata); - pandora_keys_gpio_init(); - usb_musb_init(); - -diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c -index 6a96569..a29c8ca 100644 ---- a/arch/arm/mach-omap2/usb-ehci.c -+++ b/arch/arm/mach-omap2/usb-ehci.c -@@ -68,14 +68,10 @@ static struct platform_device ehci_device = { - /* - * setup_ehci_io_mux - initialize IO pad mux for USBHOST - */ --static void setup_ehci_io_mux(enum ehci_hcd_omap_mode phy_mode) -+static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) - { -- if (phy_mode == EHCI_HCD_OMAP_MODE_PHY) { -- /* PHY mode of operation for board: 750-2083-001 -- * ISP1504 connected to Port1 and Port2 -- * Do Func Mux setting for 12-pin ULPI PHY mode -- */ -- /* Port1 */ -+ switch (port_mode[0]) { -+ case EHCI_HCD_OMAP_MODE_PHY: - omap_cfg_reg(Y9_3430_USB1HS_PHY_STP); - omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK); - omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR); -@@ -88,28 +84,8 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode phy_mode) - omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5); - omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6); - omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7); -- -- /* Port2 */ -- omap_cfg_reg(AA10_3430_USB2HS_PHY_STP); -- omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK); -- omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR); -- omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT); -- omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0); -- omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1); -- omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2); -- omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3); -- omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4); -- omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5); -- omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6); -- omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7); -- -- } else { -- /* Set Func mux for : -- * TLL mode of operation -- * 12-pin ULPI SDR TLL mode for Port1/2/3 -- */ -- -- /* Port1 */ -+ break; -+ case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(Y9_3430_USB1HS_TLL_STP); - omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK); - omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR); -@@ -122,8 +98,29 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode phy_mode) - omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5); - omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6); - omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7); -+ break; -+ case EHCI_HCD_OMAP_MODE_UNKNOWN: -+ /* FALLTHROUGH */ -+ default: -+ break; -+ } - -- /* Port2 */ -+ switch (port_mode[1]) { -+ case EHCI_HCD_OMAP_MODE_PHY: -+ omap_cfg_reg(AA10_3430_USB2HS_PHY_STP); -+ omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK); -+ omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR); -+ omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT); -+ omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0); -+ omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1); -+ omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2); -+ omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3); -+ omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4); -+ omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5); -+ omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6); -+ omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7); -+ break; -+ case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(AA10_3430_USB2HS_TLL_STP); - omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK); - omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR); -@@ -136,8 +133,18 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode phy_mode) - omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5); - omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6); - omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7); -+ break; -+ case EHCI_HCD_OMAP_MODE_UNKNOWN: -+ /* FALLTHROUGH */ -+ default: -+ break; -+ } - -- /* Port3 */ -+ switch (port_mode[2]) { -+ case EHCI_HCD_OMAP_MODE_PHY: -+ printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); -+ break; -+ case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(AB3_3430_USB3HS_TLL_STP); - omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK); - omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR); -@@ -150,28 +157,23 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode phy_mode) - omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5); - omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6); - omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7); -+ break; -+ case EHCI_HCD_OMAP_MODE_UNKNOWN: -+ /* FALLTHROUGH */ -+ default: -+ break; - } - - return; - } - --static struct ehci_hcd_omap_platform_data pdata __initconst; -- --void __init usb_ehci_init(enum ehci_hcd_omap_mode phy_mode, -- int chargepump, int phy_reset, int reset_gpio_port1, -- int reset_gpio_port2) -+void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata) - { -- pdata.phy_mode = phy_mode; -- pdata.chargepump = chargepump; -- pdata.phy_reset = phy_reset; -- pdata.reset_gpio_port1 = reset_gpio_port1; -- pdata.reset_gpio_port2 = reset_gpio_port2; -- -- platform_device_add_data(&ehci_device, &pdata, sizeof(pdata)); -+ platform_device_add_data(&ehci_device, pdata, sizeof(*pdata)); - - /* Setup Pin IO MUX for EHCI */ - if (cpu_is_omap34xx()) -- setup_ehci_io_mux(phy_mode); -+ setup_ehci_io_mux(pdata->port_mode); - - if (platform_device_register(&ehci_device) < 0) { - printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); -@@ -181,9 +183,8 @@ void __init usb_ehci_init(enum ehci_hcd_omap_mode phy_mode, - - #else - --void __init usb_ehci_init(enum ehci_hcd_omap_mode phy_mode, -- int chargepump, int phy_reset, int reset_gpio_port1, -- int reset_gpio_port2) -+void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata) -+ - { - } - -diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h -index 1b1366c..d1b14cc 100644 ---- a/arch/arm/plat-omap/include/mach/usb.h -+++ b/arch/arm/plat-omap/include/mach/usb.h -@@ -5,6 +5,7 @@ - - #include - -+#define OMAP3_HS_USB_PORTS 3 - enum ehci_hcd_omap_mode { - EHCI_HCD_OMAP_MODE_UNKNOWN, - EHCI_HCD_OMAP_MODE_PHY, -@@ -12,13 +13,12 @@ enum ehci_hcd_omap_mode { - }; - - struct ehci_hcd_omap_platform_data { -- enum ehci_hcd_omap_mode phy_mode; -+ enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS]; - unsigned chargepump:1; - unsigned phy_reset:1; - -- /* have to be valid if phy_reset is true */ -- int reset_gpio_port1; -- int reset_gpio_port2; -+ /* have to be valid if phy_reset is true and portx is in phy mode */ -+ int reset_gpio_port[OMAP3_HS_USB_PORTS]; - }; - - /*-------------------------------------------------------------------------*/ -@@ -45,9 +45,7 @@ struct ehci_hcd_omap_platform_data { - - extern void usb_musb_init(void); - --extern void usb_ehci_init(enum ehci_hcd_omap_mode phy_mode, -- int chargepump, int phy_reset, int reset_gpio_port1, -- int reset_gpio_port2); -+extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata); - - #endif - -diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c -index c7631f5..3175122 100644 ---- a/drivers/usb/host/ehci-omap.c -+++ b/drivers/usb/host/ehci-omap.c -@@ -162,8 +162,7 @@ struct ehci_hcd_omap { - */ - - /* gpio for resetting phy */ -- int reset_gpio_port1; -- int reset_gpio_port2; -+ int reset_gpio_port[OMAP3_HS_USB_PORTS]; - - /* phy reset workaround */ - int phy_reset; -@@ -172,7 +171,7 @@ struct ehci_hcd_omap { - int chargepump; - - /* desired phy_mode: TLL, PHY */ -- enum ehci_hcd_omap_mode phy_mode; -+ enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS]; - - void __iomem *uhh_base; - void __iomem *tll_base; -@@ -297,14 +296,16 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) - - if (omap->phy_reset) { - /* Refer: ISSUE1 */ -- if (gpio_is_valid(omap->reset_gpio_port1)) { -- gpio_request(omap->reset_gpio_port1, "USB1 PHY reset"); -- gpio_direction_output(omap->reset_gpio_port1, 0); -+ if (gpio_is_valid(omap->reset_gpio_port[0])) { -+ gpio_request(omap->reset_gpio_port[0], -+ "USB1 PHY reset"); -+ gpio_direction_output(omap->reset_gpio_port[0], 0); - } - -- if (gpio_is_valid(omap->reset_gpio_port2)) { -- gpio_request(omap->reset_gpio_port2, "USB2 PHY reset"); -- gpio_direction_output(omap->reset_gpio_port2, 0); -+ if (gpio_is_valid(omap->reset_gpio_port[1])) { -+ gpio_request(omap->reset_gpio_port[1], -+ "USB2 PHY reset"); -+ gpio_direction_output(omap->reset_gpio_port[1], 0); - } - - /* Hold the PHY in RESET for enough time till DIR is high */ -@@ -361,7 +362,10 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) - - ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); - -- if (omap->phy_mode == EHCI_HCD_OMAP_MODE_PHY) { -+ if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) || -+ (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) || -+ (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)) { -+ - reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); - - reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN -@@ -374,7 +378,9 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) - ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); - dev_dbg(omap->dev, "Entered ULPI PHY MODE: success\n"); - -- } else if (omap->phy_mode == EHCI_HCD_OMAP_MODE_TLL) { -+ } else if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) || -+ (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) || -+ (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) { - - /* Enable UTMI mode for all 3 TLL channels */ - omap_usb_utmi_init(omap, -@@ -396,11 +402,11 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) - */ - udelay(10); - -- if (gpio_is_valid(omap->reset_gpio_port1)) -- gpio_set_value(omap->reset_gpio_port1, 1); -+ if (gpio_is_valid(omap->reset_gpio_port[0])) -+ gpio_set_value(omap->reset_gpio_port[0], 1); - -- if (gpio_is_valid(omap->reset_gpio_port2)) -- gpio_set_value(omap->reset_gpio_port2, 1); -+ if (gpio_is_valid(omap->reset_gpio_port[1])) -+ gpio_set_value(omap->reset_gpio_port[1], 1); - } - - if (omap->chargepump) { -@@ -438,11 +444,11 @@ err_tll_fck: - clk_put(omap->usbhost1_48m_fck); - - if (omap->phy_reset) { -- if (gpio_is_valid(omap->reset_gpio_port1)) -- gpio_free(omap->reset_gpio_port1); -+ if (gpio_is_valid(omap->reset_gpio_port[0])) -+ gpio_free(omap->reset_gpio_port[0]); - -- if (gpio_is_valid(omap->reset_gpio_port2)) -- gpio_free(omap->reset_gpio_port2); -+ if (gpio_is_valid(omap->reset_gpio_port[1])) -+ gpio_free(omap->reset_gpio_port[1]); - } - - err_host_48m_fck: -@@ -531,11 +537,11 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) - } - - if (omap->phy_reset) { -- if (gpio_is_valid(omap->reset_gpio_port1)) -- gpio_free(omap->reset_gpio_port1); -+ if (gpio_is_valid(omap->reset_gpio_port[0])) -+ gpio_free(omap->reset_gpio_port[0]); - -- if (gpio_is_valid(omap->reset_gpio_port2)) -- gpio_free(omap->reset_gpio_port2); -+ if (gpio_is_valid(omap->reset_gpio_port[1])) -+ gpio_free(omap->reset_gpio_port[1]); - } - - dev_dbg(omap->dev, "Clock to USB host has been disabled\n"); -@@ -590,10 +596,13 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) - platform_set_drvdata(pdev, omap); - omap->dev = &pdev->dev; - omap->phy_reset = pdata->phy_reset; -- omap->reset_gpio_port1 = pdata->reset_gpio_port1; -- omap->reset_gpio_port2 = pdata->reset_gpio_port2; -- omap->phy_mode = pdata->phy_mode; -- omap->chargepump = pdata->chargepump; -+ omap->reset_gpio_port[0] = pdata->reset_gpio_port[0]; -+ omap->reset_gpio_port[1] = pdata->reset_gpio_port[1]; -+ omap->reset_gpio_port[2] = pdata->reset_gpio_port[2]; -+ omap->port_mode[0] = pdata->port_mode[0]; -+ omap->port_mode[1] = pdata->port_mode[1]; -+ omap->port_mode[2] = pdata->port_mode[2]; -+ omap->chargepump = pdata->chargepump; - omap->ehci = hcd_to_ehci(hcd); - omap->ehci->sbrn = 0x20; - --- -1.6.2.4 - diff --git a/recipes/linux/linux-omap-2.6.31/usb/0009-ehci-Support-for-ES3.x.patch b/recipes/linux/linux-omap-2.6.31/usb/0009-ehci-Support-for-ES3.x.patch deleted file mode 100644 index bd29031f1c..0000000000 --- a/recipes/linux/linux-omap-2.6.31/usb/0009-ehci-Support-for-ES3.x.patch +++ /dev/null @@ -1,170 +0,0 @@ -From 2caa398b8d7d37ecbf062fd36c54ed6807e3ab5b Mon Sep 17 00:00:00 2001 -From: Ajay Kumar Gupta -Date: Mon, 13 Jul 2009 14:13:26 +0530 -Subject: [PATCH 09/16] ehci: Support for ES3.x - -OMAP ES3.x supports portwise PHY or TLL mode of operation whereas -in ES2.x all the three ports can either be in PHY mode or in TLL -mode.Port3 can not be configured in PHY mode. - -Port mode must be defined either PHY, TLL or UNKNOWN in platform -files.Be careful of the scenario where one port is set as PHY and -other in TLL but the OMAP silicon version is 2.x or earlier where -this scenario is *not* supported. - -Changes are : - - Setup all the bypass configuration in omap_start_ehc() - based on ES version. - - Remove UHH_HOSTCONFIG programming for bypass settings - in omap_usb_utmi_init() - -Signed-off-by: Ajay Kumar Gupta ---- - drivers/usb/host/ehci-omap.c | 90 ++++++++++++++++++++++++------------------ - 1 files changed, 52 insertions(+), 38 deletions(-) - -diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c -index 3175122..81a0b65 100644 ---- a/drivers/usb/host/ehci-omap.c -+++ b/drivers/usb/host/ehci-omap.c -@@ -32,7 +32,6 @@ - * - move DPLL5 programming to clock fw - * - add suspend/resume - * - move workarounds to board-files -- * - differentiate between ES2.x and ES3.x - */ - - #include -@@ -102,6 +101,9 @@ - #define OMAP_UHH_SYSSTATUS (0x14) - #define OMAP_UHH_HOSTCONFIG (0x40) - #define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) -+#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) -+#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) -+#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) - #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) - #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) - #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) -@@ -185,16 +187,6 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask) - unsigned reg; - int i; - -- reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); -- reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS -- | OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN -- | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN -- | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN; -- reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; -- -- /* Use UTMI Ports of TLL */ -- ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); -- - /* Program the 3 TLL channels upfront */ - for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) { - reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); -@@ -243,7 +235,9 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask) - */ - static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) - { -+ struct omap_chip_id oci = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES3); - unsigned long timeout = jiffies + msecs_to_jiffies(1000); -+ u8 tll_ch_mask = 0; - unsigned reg = 0; - int ret = 0; - -@@ -362,37 +356,58 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) - - ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); - -- if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) || -- (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) || -- (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)) { -+ reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); - -- reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); -+ /* setup ULPI bypass and burst configurations */ -+ reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN -+ | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN -+ | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); -+ reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; - -- reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN -- | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN -- | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); -- reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_BYPASS -- | OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN); -+ /* Bypass the TLL module for PHY mode operation */ -+ if (omap_chip_is(oci)) { -+ dev_dbg(omap->dev, "OMAP3 ES version > ES3\n"); -+ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) -+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; -+ else if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) -+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - -- /* Bypass the TLL module for PHY mode operation */ -- ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); -- dev_dbg(omap->dev, "Entered ULPI PHY MODE: success\n"); -+ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) -+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; -+ else if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) -+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; -+ -+ if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY) -+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; -+ else if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL) -+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - -- } else if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) || -- (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) || -- (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) { -- -- /* Enable UTMI mode for all 3 TLL channels */ -- omap_usb_utmi_init(omap, -- OMAP_TLL_CHANNEL_1_EN_MASK | -- OMAP_TLL_CHANNEL_2_EN_MASK | -- OMAP_TLL_CHANNEL_3_EN_MASK -- ); - } else { -- dev_err(hcd->self.controller, -- "UNKOWN mode requested\n"); -- ret = -EINVAL; -- goto err_unknown_mode; -+ dev_dbg(omap->dev, "OMAP3 ES version < ES3\n"); -+ if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) || -+ (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) || -+ (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)) -+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; -+ else -+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; -+ } -+ ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); -+ dev_dbg(omap->dev, "UHH setup done, uhh_base=%x\n", reg); -+ -+ -+ if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) || -+ (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) || -+ (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) { -+ -+ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) -+ tll_ch_mask |= OMAP_TLL_CHANNEL_1_EN_MASK; -+ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) -+ tll_ch_mask |= OMAP_TLL_CHANNEL_2_EN_MASK; -+ if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL) -+ tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK; -+ -+ /* Enable UTMI mode for required TLL channels */ -+ omap_usb_utmi_init(omap, tll_ch_mask); - } - - if (omap->phy_reset) { -@@ -430,7 +445,6 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) - - return 0; - --err_unknown_mode: - err_sys_status: - clk_disable(omap->usbtll_ick); - clk_put(omap->usbtll_ick); --- -1.6.2.4 - diff --git a/recipes/linux/linux-omap-2.6.31/usb/0010-ehci-update-driver-with-generic-change.patch b/recipes/linux/linux-omap-2.6.31/usb/0010-ehci-update-driver-with-generic-change.patch deleted file mode 100644 index c517931edd..0000000000 --- a/recipes/linux/linux-omap-2.6.31/usb/0010-ehci-update-driver-with-generic-change.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 4ad1dd4ce8c9c04c2fbfad72a78247d848090329 Mon Sep 17 00:00:00 2001 -From: Ajay Kumar Gupta -Date: Fri, 10 Jul 2009 19:46:20 +0530 -Subject: [PATCH 10/16] ehci: update driver with generic change - -Update the OMAP EHCI driver in accordance with below patch -introduced in generic EHCI driver. - -commit: b18ffd49e86102a9ed0a1cc83fdafe3891e844e5 -USB: EHCI: update toggle state for linked QHs - -Signed-off-by: Ajay Kumar Gupta ---- - drivers/usb/host/ehci-omap.c | 1 + - 1 files changed, 1 insertions(+), 0 deletions(-) - -diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c -index 81a0b65..8b944d7 100644 ---- a/drivers/usb/host/ehci-omap.c -+++ b/drivers/usb/host/ehci-omap.c -@@ -761,6 +761,7 @@ static const struct hc_driver ehci_omap_hc_driver = { - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, -+ .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support --- -1.6.2.4 - diff --git a/recipes/linux/linux-omap_2.6.31.bb b/recipes/linux/linux-omap_2.6.31.bb index c0f1bc4c63..38d1b315ac 100644 --- a/recipes/linux/linux-omap_2.6.31.bb +++ b/recipes/linux/linux-omap_2.6.31.bb @@ -8,7 +8,7 @@ COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard| DEFAULT_PREFERENCE = "-1" DEFAULT_PREFERENCE_omapzoom2 = "1" -SRCREV = "52a962f09ab2306a2ac6e22c2d3bac1a76ac" +SRCREV = "945044d157dd63c6af0f2ed40a5346382af94eb4" # The main PR is now using MACHINE_KERNEL_PR, for omap3 see conf/machine/include/omap3.inc #PV = "2.6.30+2.6.31-rc8+gitr${SRCREV}" @@ -48,23 +48,15 @@ SRC_URI_append = " \ file://madc/madc.patch;patch=1 \ file://arch-has-holes.diff;patch=1 \ file://usb/0001-musb-fix-put_device-call-sequence.patch;patch=1 \ - file://usb/0002-ehci-fix-ehci-pin-mux-init.patch;patch=1 \ - file://usb/0003-ehci-adding-mux-pin-for-EHCI-phy-reset-line.patch;patch=1 \ - file://usb/0004-ehci-correct-EHCI-init-parameters-on-OMAP3EVM.patch;patch=1 \ - file://usb/0005-ehci-fix-phy_reset-init-in-ehci-probe.patch;patch=1 \ - file://usb/0006-ehci-increase-timeout-to-fix-ehci-failure.patch;patch=1 \ - file://usb/0007-ehci-portwise-configurations.patch;patch=1 \ file://usb/0008-omap3-Add-CHIP_GE_OMAP3430ES3-for-HSUSB.patch;patch=1 \ - file://usb/0009-ehci-Support-for-ES3.x.patch;patch=1 \ - file://usb/0010-ehci-update-driver-with-generic-change.patch;patch=1 \ file://usb/0011-musb-fix-musb-gadget_driver-NULL-bug.patch;patch=1 \ file://usb/0012-musb-Add-back-old-musb-procfs-file.patch;patch=1 \ file://usb/0013-musb-Remove-USB_SUSPEND-auto-select-with-OTG.patch;patch=1 \ file://usb/0014-musb-disable-PING-on-status-phase-of-control-transf.patch;patch=1 \ file://usb/0015-musb-Add-context-save-and-restore-support.patch;patch=1 \ file://usb/0016-usb-update-defconfig.patch;patch=1 \ + file://usb/0001-ARM-OMAP-Fix-beagleboard-EHCI-setup.patch;patch=1 \ file://modedb-hd720.patch;patch=1 \ - file://fix-omapfb.patch;patch=1 \ file://dss2/beagle-dss2-support.patch;patch=1 \ " -- cgit v1.2.3