From 8de6a61d4c0492b9b06b75f0ded80156105b3699 Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Mon, 11 Jan 2010 20:40:48 +0100 Subject: linux-kexecboot 2.6.32: add omap3 support --- ...-Overo-Add-support-for-second-ethernet-po.patch | 110 + ...-ehci-omap-use-new-location-for-usb.h-inc.patch | 25 + ...net-smsc911x-return-ENODEV-if-device-is-n.patch | 29 + ...s-input-touchscreen-ads7846-return-ENODEV.patch | 53 + ...add-support-for-TCT-Zippy-to-Beagle-board.patch | 135 + ...MAP-Make-beagle-u-boot-partition-writable.patch | 24 + ...able-audio-capture-by-default-for-twl4030.patch | 27 + ...Makefile.fwinst-fix-typo-missing-space-in.patch | 25 + ...ap2-proper-fix-for-subpage-read-ECC-error.patch | 35 + .../linux-kexecboot-2.6.32/beagleboard/defconfig | 2922 ++++++++++++++++++++ .../0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch | 159 ++ ...do24m-ensure-chip-select-changes-between-.patch | 30 + .../0001-omap3-cm-t35-add-mux-initialization.patch | 153 + ...002-omap3-cm-t35-add-DSS2-display-support.patch | 307 ++ ...03-omap3-cm-t35-update-defconfig-for-DSS2.patch | 145 + .../0004-omap3-cm-t35-add-cm-t35-mux-configs.patch | 427 +++ .../0006-omap3-cm-t35-update-defconfig.patch | 87 + .../linux-kexecboot-2.6.32/cm-t35/defconfig | 1823 ++++++++++++ ...-Add-support-for-LG-Philips-LB035Q02-pane.patch | 254 ++ .../0014-OMAP-DSS-Add-DSS2-support-for-Overo.patch | 343 +++ ...0015-OMAP-DSS-Add-DSS2-support-for-Beagle.patch | 186 ++ .../dss2/0016-video-add-timings-for-hd720.patch | 27 + .../dss2/beagle-dss2-support.diff | 308 +++ .../0009-drivers-mfd-add-twl4030-madc-driver.patch | 601 ++++ ...RM-OMAP-Add-twl4030-madc-support-to-Overo.patch | 32 + ...M-OMAP-Add-twl4030-madc-support-to-Beagle.patch | 35 + ...OMAP-Add-missing-twl4030-madc-header-file.patch | 149 + .../linux-kexecboot-2.6.32/sctp-fix.patch | 47 + .../usb/ehci-omap.c-mach-to-plat.diff | 12 + .../linux-kexecboot-2.6.32/usb/ehci.patch | 46 + recipes/kexecboot/linux-kexecboot_2.6.32.bb | 33 + 31 files changed, 8589 insertions(+) create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/0001-ARM-OMAP-Overo-Add-support-for-second-ethernet-po.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/0002-ARM-OMAP-ehci-omap-use-new-location-for-usb.h-inc.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/0003-drivers-net-smsc911x-return-ENODEV-if-device-is-n.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/0004-drivers-input-touchscreen-ads7846-return-ENODEV.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/0005-ARM-OMAP-add-support-for-TCT-Zippy-to-Beagle-board.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/0006-ARM-OMAP-Make-beagle-u-boot-partition-writable.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/0007-ASoC-enable-audio-capture-by-default-for-twl4030.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/0008-scripts-Makefile.fwinst-fix-typo-missing-space-in.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/0009-MTD-NAND-omap2-proper-fix-for-subpage-read-ECC-error.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/beagleboard/defconfig create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0001-omap3-cm-t35-add-mux-initialization.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0006-omap3-cm-t35-update-defconfig.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/defconfig create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0012-OMAP-DSS2-Add-support-for-LG-Philips-LB035Q02-pane.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0014-OMAP-DSS-Add-DSS2-support-for-Overo.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0015-OMAP-DSS-Add-DSS2-support-for-Beagle.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0016-video-add-timings-for-hd720.patch create mode 100755 recipes/kexecboot/linux-kexecboot-2.6.32/dss2/beagle-dss2-support.diff create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/madc/0009-drivers-mfd-add-twl4030-madc-driver.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/madc/0010-ARM-OMAP-Add-twl4030-madc-support-to-Overo.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/madc/0011-ARM-OMAP-Add-twl4030-madc-support-to-Beagle.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/madc/0013-ARM-OMAP-Add-missing-twl4030-madc-header-file.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/sctp-fix.patch create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/usb/ehci-omap.c-mach-to-plat.diff create mode 100644 recipes/kexecboot/linux-kexecboot-2.6.32/usb/ehci.patch (limited to 'recipes/kexecboot') diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/0001-ARM-OMAP-Overo-Add-support-for-second-ethernet-po.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/0001-ARM-OMAP-Overo-Add-support-for-second-ethernet-po.patch new file mode 100644 index 0000000000..3254fe4562 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/0001-ARM-OMAP-Overo-Add-support-for-second-ethernet-po.patch @@ -0,0 +1,110 @@ +From 190c75031e65008425dbdd74c3e3237beed18460 Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Tue, 15 Dec 2009 14:59:42 -0800 +Subject: [PATCH 01/16] ARM: OMAP: Overo: Add support for second ethernet port + +Signed-off-by: Steve Sakoman +--- + arch/arm/mach-omap2/board-overo.c | 56 +++++++++++++++++++++++++++++++++++-- + 1 files changed, 53 insertions(+), 3 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c +index 52dfd51..1b94f2c 100644 +--- a/arch/arm/mach-omap2/board-overo.c ++++ b/arch/arm/mach-omap2/board-overo.c +@@ -63,6 +63,8 @@ + + #define OVERO_SMSC911X_CS 5 + #define OVERO_SMSC911X_GPIO 176 ++#define OVERO_SMSC911X2_CS 4 ++#define OVERO_SMSC911X2_GPIO 65 + + #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +@@ -137,6 +139,16 @@ static struct resource overo_smsc911x_resources[] = { + }, + }; + ++static struct resource overo_smsc911x2_resources[] = { ++ { ++ .name = "smsc911x2-memory", ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, ++ }, ++}; ++ + static struct smsc911x_platform_config overo_smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, +@@ -146,7 +158,7 @@ static struct smsc911x_platform_config overo_smsc911x_config = { + + static struct platform_device overo_smsc911x_device = { + .name = "smsc911x", +- .id = -1, ++ .id = 0, + .num_resources = ARRAY_SIZE(overo_smsc911x_resources), + .resource = overo_smsc911x_resources, + .dev = { +@@ -154,9 +166,26 @@ static struct platform_device overo_smsc911x_device = { + }, + }; + ++static struct platform_device overo_smsc911x2_device = { ++ .name = "smsc911x", ++ .id = 1, ++ .num_resources = ARRAY_SIZE(overo_smsc911x2_resources), ++ .resource = overo_smsc911x2_resources, ++ .dev = { ++ .platform_data = &overo_smsc911x_config, ++ }, ++}; ++ ++static struct platform_device *smsc911x_devices[] = { ++ &overo_smsc911x_device, ++ &overo_smsc911x2_device, ++}; ++ + static inline void __init overo_init_smsc911x(void) + { +- unsigned long cs_mem_base; ++ unsigned long cs_mem_base, cs_mem_base2; ++ ++ /* set up first smsc911x chip */ + + if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n"); +@@ -177,7 +206,28 @@ static inline void __init overo_init_smsc911x(void) + overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO); + overo_smsc911x_resources[1].end = 0; + +- platform_device_register(&overo_smsc911x_device); ++ /* set up second smsc911x chip */ ++ ++ if (gpmc_cs_request(OVERO_SMSC911X2_CS, SZ_16M, &cs_mem_base2) < 0) { ++ printk(KERN_ERR "Failed request for GPMC mem for smsc911x2\n"); ++ return; ++ } ++ ++ overo_smsc911x2_resources[0].start = cs_mem_base2 + 0x0; ++ overo_smsc911x2_resources[0].end = cs_mem_base2 + 0xff; ++ ++ if ((gpio_request(OVERO_SMSC911X2_GPIO, "SMSC911X2 IRQ") == 0) && ++ (gpio_direction_input(OVERO_SMSC911X2_GPIO) == 0)) { ++ gpio_export(OVERO_SMSC911X2_GPIO, 0); ++ } else { ++ printk(KERN_ERR "could not obtain gpio for SMSC911X2 IRQ\n"); ++ return; ++ } ++ ++ overo_smsc911x2_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X2_GPIO); ++ overo_smsc911x2_resources[1].end = 0; ++ ++ platform_add_devices(smsc911x_devices, ARRAY_SIZE(smsc911x_devices)); + } + + #else +-- +1.6.2.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/0002-ARM-OMAP-ehci-omap-use-new-location-for-usb.h-inc.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/0002-ARM-OMAP-ehci-omap-use-new-location-for-usb.h-inc.patch new file mode 100644 index 0000000000..7add534bc7 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/0002-ARM-OMAP-ehci-omap-use-new-location-for-usb.h-inc.patch @@ -0,0 +1,25 @@ +From 06e97c7ea488e350b7aae5f3864a1bbe0666db87 Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Tue, 15 Dec 2009 15:12:54 -0800 +Subject: [PATCH 02/16] ARM: OMAP: ehci-omap: use new location for usb.h include + +--- + drivers/usb/host/ehci-omap.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c +index 7ba8df3..5cfed78 100644 +--- a/drivers/usb/host/ehci-omap.c ++++ b/drivers/usb/host/ehci-omap.c +@@ -37,7 +37,7 @@ + #include + #include + #include +-#include ++#include + + /* + * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES +-- +1.6.2.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/0003-drivers-net-smsc911x-return-ENODEV-if-device-is-n.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/0003-drivers-net-smsc911x-return-ENODEV-if-device-is-n.patch new file mode 100644 index 0000000000..c15cf3a396 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/0003-drivers-net-smsc911x-return-ENODEV-if-device-is-n.patch @@ -0,0 +1,29 @@ +From 196c189ca20294fdcef264995f68cca74b1e16ea Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Tue, 15 Dec 2009 15:17:44 -0800 +Subject: [PATCH 03/16] drivers: net: smsc911x: return ENODEV if device is not found + +Signed-off-by: Steve Sakoman +--- + drivers/net/smsc911x.c | 4 +++- + 1 files changed, 3 insertions(+), 1 deletions(-) + +diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c +index f9cdcbc..9ca18b5 100644 +--- a/drivers/net/smsc911x.c ++++ b/drivers/net/smsc911x.c +@@ -2021,8 +2021,10 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) + } + + retval = smsc911x_init(dev); +- if (retval < 0) ++ if (retval < 0) { ++ retval = -ENODEV; + goto out_unmap_io_3; ++ } + + /* configure irq polarity and type before connecting isr */ + if (pdata->config.irq_polarity == SMSC911X_IRQ_POLARITY_ACTIVE_HIGH) +-- +1.6.2.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/0004-drivers-input-touchscreen-ads7846-return-ENODEV.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/0004-drivers-input-touchscreen-ads7846-return-ENODEV.patch new file mode 100644 index 0000000000..345213cb59 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/0004-drivers-input-touchscreen-ads7846-return-ENODEV.patch @@ -0,0 +1,53 @@ +From deb568b94c448aa7ffcc9e6788bcf9069fd3b864 Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Tue, 15 Dec 2009 15:24:10 -0800 +Subject: [PATCH 04/16] drivers: input: touchscreen: ads7846: return ENODEV if device is not found + +Signed-off-by: Steve Sakoman +--- + drivers/input/touchscreen/ads7846.c | 13 ++++++++++--- + 1 files changed, 10 insertions(+), 3 deletions(-) + +diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c +index 09c8109..7cc9973 100644 +--- a/drivers/input/touchscreen/ads7846.c ++++ b/drivers/input/touchscreen/ads7846.c +@@ -1170,9 +1170,16 @@ static int __devinit ads7846_probe(struct spi_device *spi) + /* take a first sample, leaving nPENIRQ active and vREF off; avoid + * the touchscreen, in case it's not connected. + */ +- (void) ads7846_read12_ser(&spi->dev, ++ err = ads7846_read12_ser(&spi->dev, + READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON); + ++ /* if sample is all 0's or all 1's then there is no device on spi */ ++ if ( (err == 0x000) || (err == 0xfff)) { ++ dev_info(&spi->dev, "no device detected, test read result was 0x%08X\n", err); ++ err = -ENODEV; ++ goto err_free_irq; ++ } ++ + err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group); + if (err) + goto err_remove_hwmon; +@@ -1190,7 +1197,7 @@ static int __devinit ads7846_probe(struct spi_device *spi) + err_free_irq: + free_irq(spi->irq, ts); + err_free_gpio: +- if (ts->gpio_pendown != -1) ++ if (!ts->get_pendown_state && ts->gpio_pendown != -1) + gpio_free(ts->gpio_pendown); + err_cleanup_filter: + if (ts->filter_cleanup) +@@ -1217,7 +1224,7 @@ static int __devexit ads7846_remove(struct spi_device *spi) + /* suspend left the IRQ disabled */ + enable_irq(ts->spi->irq); + +- if (ts->gpio_pendown != -1) ++ if (!ts->get_pendown_state && ts->gpio_pendown != -1) + gpio_free(ts->gpio_pendown); + + if (ts->filter_cleanup) +-- +1.6.2.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/0005-ARM-OMAP-add-support-for-TCT-Zippy-to-Beagle-board.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/0005-ARM-OMAP-add-support-for-TCT-Zippy-to-Beagle-board.patch new file mode 100644 index 0000000000..1c51552792 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/0005-ARM-OMAP-add-support-for-TCT-Zippy-to-Beagle-board.patch @@ -0,0 +1,135 @@ +From 334eef94045c93957cad3477522086492dd19b06 Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Tue, 15 Dec 2009 15:34:29 -0800 +Subject: [PATCH 05/16] ARM: OMAP: add support for TCT Zippy to Beagle board file + +Signed-off-by: Steve Sakoman +--- + arch/arm/mach-omap2/board-omap3beagle.c | 74 +++++++++++++++++++++++++++++- + 1 files changed, 71 insertions(+), 3 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index 41480bd..f3df638 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -21,6 +21,7 @@ + #include + #include + #include ++#include + #include + #include + +@@ -52,6 +53,49 @@ + + #define NAND_BLOCK_SIZE SZ_128K + ++#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE) ++ ++#include ++#include ++ ++#define OMAP3BEAGLE_GPIO_ENC28J60_IRQ 157 ++ ++static struct omap2_mcspi_device_config enc28j60_spi_chip_info = { ++ .turbo_mode = 0, ++ .single_channel = 1, /* 0: slave, 1: master */ ++}; ++ ++static struct spi_board_info omap3beagle_spi_board_info[] __initdata = { ++ { ++ .modalias = "enc28j60", ++ .bus_num = 4, ++ .chip_select = 0, ++ .max_speed_hz = 20000000, ++ .controller_data = &enc28j60_spi_chip_info, ++ }, ++}; ++ ++static void __init omap3beagle_enc28j60_init(void) ++{ ++ if ((gpio_request(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, "ENC28J60_IRQ") == 0) && ++ (gpio_direction_input(OMAP3BEAGLE_GPIO_ENC28J60_IRQ) == 0)) { ++ gpio_export(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, 0); ++ omap3beagle_spi_board_info[0].irq = OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_ENC28J60_IRQ); ++ set_irq_type(omap3beagle_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING); ++ } else { ++ printk(KERN_ERR "could not obtain gpio for ENC28J60_IRQ\n"); ++ return; ++ } ++ ++ spi_register_board_info(omap3beagle_spi_board_info, ++ ARRAY_SIZE(omap3beagle_spi_board_info)); ++} ++ ++#else ++static inline void __init omap3beagle_enc28j60_init(void) { return; } ++#endif ++ ++ + static struct mtd_partition omap3beagle_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { +@@ -114,6 +158,14 @@ static struct twl4030_hsmmc_info mmc[] = { + .wires = 8, + .gpio_wp = 29, + }, ++ { ++ .mmc = 2, ++ .wires = 4, ++ .gpio_wp = 141, ++ .gpio_cd = 162, ++ .transceiver = true, ++ .ocr_mask = 0x00100000, /* 3.3V */ ++ }, + {} /* Terminator */ + }; + +@@ -277,7 +329,7 @@ static struct twl4030_platform_data beagle_twldata = { + .vpll2 = &beagle_vpll2, + }; + +-static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { ++static struct i2c_board_info __initdata beagle_i2c1_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, +@@ -286,10 +338,24 @@ static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { + }, + }; + ++#if defined(CONFIG_RTC_DRV_DS1307) || \ ++ defined(CONFIG_RTC_DRV_DS1307_MODULE) ++ ++static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = { ++ { ++ I2C_BOARD_INFO("ds1307", 0x68), ++ }, ++}; ++#else ++static struct i2c_board_info __initdata beagle_i2c2_boardinfo[] = {}; ++#endif ++ + static int __init omap3_beagle_i2c_init(void) + { +- omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo, +- ARRAY_SIZE(beagle_i2c_boardinfo)); ++ omap_register_i2c_bus(1, 2600, beagle_i2c1_boardinfo, ++ ARRAY_SIZE(beagle_i2c1_boardinfo)); ++ omap_register_i2c_bus(2, 400, beagle_i2c2_boardinfo, ++ ARRAY_SIZE(beagle_i2c2_boardinfo)); + /* Bus 3 is attached to the DVI port where devices like the pico DLP + * projector don't work reliably with 400kHz */ + omap_register_i2c_bus(3, 100, NULL, 0); +@@ -434,6 +500,8 @@ static void __init omap3_beagle_init(void) + /* REVISIT leave DVI powered down until it's needed ... */ + gpio_direction_output(170, true); + ++ omap3beagle_enc28j60_init(); ++ + usb_musb_init(); + usb_ehci_init(&ehci_pdata); + omap3beagle_flash_init(); +-- +1.6.2.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/0006-ARM-OMAP-Make-beagle-u-boot-partition-writable.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/0006-ARM-OMAP-Make-beagle-u-boot-partition-writable.patch new file mode 100644 index 0000000000..3ad1853e3f --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/0006-ARM-OMAP-Make-beagle-u-boot-partition-writable.patch @@ -0,0 +1,24 @@ +From 2607d201fb202499533aa4a7fc788b4fa5fd1fcf Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Thu, 17 Dec 2009 12:40:24 -0800 +Subject: [PATCH 06/16] ARM: OMAP: Make beagle u-boot partition writable + +--- + arch/arm/mach-omap2/board-omap3beagle.c | 1 - + 1 files changed, 0 insertions(+), 1 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index f3df638..d00b089 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -108,7 +108,6 @@ static struct mtd_partition omap3beagle_nand_partitions[] = { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, +- .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot Env", +-- +1.6.2.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/0007-ASoC-enable-audio-capture-by-default-for-twl4030.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/0007-ASoC-enable-audio-capture-by-default-for-twl4030.patch new file mode 100644 index 0000000000..6ad4366f02 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/0007-ASoC-enable-audio-capture-by-default-for-twl4030.patch @@ -0,0 +1,27 @@ +From a0cf94cd5d99280fccc29e6b7777c448f15d1c65 Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Thu, 17 Dec 2009 12:45:20 -0800 +Subject: [PATCH 07/16] ASoC: enable audio capture by default for twl4030 + +--- + sound/soc/codecs/twl4030.c | 4 ++-- + 1 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c +index 4df7c6c..e85db73 100644 +--- a/sound/soc/codecs/twl4030.c ++++ b/sound/soc/codecs/twl4030.c +@@ -46,8 +46,8 @@ static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = { + 0xc3, /* REG_OPTION (0x2) */ + 0x00, /* REG_UNKNOWN (0x3) */ + 0x00, /* REG_MICBIAS_CTL (0x4) */ +- 0x20, /* REG_ANAMICL (0x5) */ +- 0x00, /* REG_ANAMICR (0x6) */ ++ 0x34, /* REG_ANAMICL (0x5) */ ++ 0x14, /* REG_ANAMICR (0x6) */ + 0x00, /* REG_AVADC_CTL (0x7) */ + 0x00, /* REG_ADCMICSEL (0x8) */ + 0x00, /* REG_DIGMIXING (0x9) */ +-- +1.6.2.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/0008-scripts-Makefile.fwinst-fix-typo-missing-space-in.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/0008-scripts-Makefile.fwinst-fix-typo-missing-space-in.patch new file mode 100644 index 0000000000..9b5ccaac69 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/0008-scripts-Makefile.fwinst-fix-typo-missing-space-in.patch @@ -0,0 +1,25 @@ +From ce9fc5ab828b050605eb7d916f64ace7b227eea6 Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Thu, 17 Dec 2009 12:51:53 -0800 +Subject: [PATCH 08/16] scripts/Makefile.fwinst: fix typo (missing space in setting mode) + +--- + scripts/Makefile.fwinst | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst +index 6bf8e87..fb20532 100644 +--- a/scripts/Makefile.fwinst ++++ b/scripts/Makefile.fwinst +@@ -37,7 +37,7 @@ install-all-dirs: $(installed-fw-dirs) + @true + + quiet_cmd_install = INSTALL $(subst $(srctree)/,,$@) +- cmd_install = $(INSTALL) -m0644 $< $@ ++ cmd_install = $(INSTALL) -m 0644 $< $@ + + $(installed-fw-dirs): + $(call cmd,mkdir) +-- +1.6.2.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/0009-MTD-NAND-omap2-proper-fix-for-subpage-read-ECC-error.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/0009-MTD-NAND-omap2-proper-fix-for-subpage-read-ECC-error.patch new file mode 100644 index 0000000000..6e7f706c51 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/0009-MTD-NAND-omap2-proper-fix-for-subpage-read-ECC-error.patch @@ -0,0 +1,35 @@ +From 64e4fc11b960da97728e0d87dcf4c1e98f808501 Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Thu, 31 Dec 2009 07:05:02 -0800 +Subject: [PATCH] MTD: NAND: omap2: proper fix for subpage read ECC errors + +--- + drivers/mtd/nand/omap2.c | 11 +++++++---- + 1 files changed, 7 insertions(+), 4 deletions(-) + +diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c +index 1bb799f..75004fe 100644 +--- a/drivers/mtd/nand/omap2.c ++++ b/drivers/mtd/nand/omap2.c +@@ -295,11 +295,14 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len) + u32 *p = (u32 *)buf; + + /* take care of subpage reads */ +- for (; len % 4 != 0; ) { +- *buf++ = __raw_readb(info->nand.IO_ADDR_R); +- len--; ++ if (len % 4) { ++ if (info->nand.options & NAND_BUSWIDTH_16) ++ omap_read_buf16(mtd, buf, len % 4); ++ else ++ omap_read_buf8(mtd, buf, len % 4); ++ p = (u32 *) (buf + len % 4); ++ len -= len % 4; + } +- p = (u32 *) buf; + + /* configure and start prefetch transfer */ + ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0); +-- +1.6.5 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/beagleboard/defconfig b/recipes/kexecboot/linux-kexecboot-2.6.32/beagleboard/defconfig new file mode 100644 index 0000000000..29082720f6 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/beagleboard/defconfig @@ -0,0 +1,2922 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32 +# Thu Dec 10 10:50:29 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +# CONFIG_SLOW_WORK_DEBUG is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_RESET_CLOCKS=y +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +CONFIG_OMAP_MBOX_FWK=m +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_NONE is not set +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y +CONFIG_OMAP_PACKAGE_CBB=y + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP3_BEAGLE=y +CONFIG_MACH_OMAP_LDP=y +CONFIG_MACH_OVERO=y +CONFIG_MACH_OMAP3EVM=y +# CONFIG_MACH_OMAP3517EVM is not set +CONFIG_MACH_OMAP3_PANDORA=y +# CONFIG_MACH_OMAP3_TOUCHBOOK is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set +CONFIG_MACH_OMAP_ZOOM2=y +# CONFIG_MACH_OMAP_ZOOM3 is not set +# CONFIG_MACH_CM_T35 is not set +CONFIG_MACH_IGEP0020=y +# CONFIG_MACH_OMAP_3630SDP is not set +# CONFIG_OMAP3_EMU is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_DEBUG=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +# CONFIG_IPV6_PIMSM_V2 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +CONFIG_IP_VS_DEBUG=y +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +# CONFIG_BRIDGE_NF_EBTABLES is not set +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=y +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=y + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set +CONFIG_TIPC=m +# CONFIG_TIPC_ADVANCED is not set +# CONFIG_TIPC_DEBUG is not set +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +CONFIG_WAN_ROUTER=m +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m + +# +# CAN Device Drivers +# +CONFIG_CAN_VCAN=m +# CONFIG_CAN_DEV is not set +# CONFIG_CAN_DEBUG_DEVICES is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +CONFIG_IRDA_ULTRA=y + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +CONFIG_IRDA_DEBUG=y + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +CONFIG_DONGLE=y +CONFIG_ESI_DONGLE=m +CONFIG_ACTISYS_DONGLE=m +CONFIG_TEKRAM_DONGLE=m +CONFIG_TOIM3232_DONGLE=m +CONFIG_LITELINK_DONGLE=m +CONFIG_MA600_DONGLE=m +CONFIG_GIRBIL_DONGLE=m +CONFIG_MCP2120_DONGLE=m +CONFIG_OLD_BELKIN_DONGLE=m +# CONFIG_ACT200L_DONGLE is not set +CONFIG_KINGSUN_DONGLE=m +CONFIG_KSDAZZLE_DONGLE=m +CONFIG_KS959_DONGLE=m + +# +# FIR device drivers +# +CONFIG_USB_IRDA=m +CONFIG_SIGMATEL_FIR=m +CONFIG_MCS_FIR=m +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=y +CONFIG_BT_HCIBTSDIO=y +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +CONFIG_BT_HCIBFUSB=y +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +CONFIG_AF_RXRPC=m +# CONFIG_AF_RXRPC_DEBUG is not set +# CONFIG_RXKAD is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_SPY=y +CONFIG_WEXT_PRIV=y +CONFIG_CFG80211=y +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_CFG80211_WEXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=y +CONFIG_LIB80211_CRYPT_WEP=y +CONFIG_LIB80211_CRYPT_CCMP=y +CONFIG_LIB80211_CRYPT_TKIP=y +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=y +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_WIMAX=m +CONFIG_WIMAX_DEBUG_LEVEL=8 +# CONFIG_RFKILL is not set +CONFIG_NET_9P=m +# CONFIG_NET_9P_DEBUG is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_PREFETCH=y +# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +CONFIG_EEPROM_93CX6=y +# CONFIG_IWMC3200TOP is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID6_PQ=m +# CONFIG_ASYNC_RAID6_TEST is not set +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +# CONFIG_DM_LOG_USERSPACE is not set +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_QL is not set +# CONFIG_DM_MULTIPATH_ST is not set +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +CONFIG_MACVLAN=m +CONFIG_EQUALIZER=m +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +CONFIG_ENC28J60=y +# CONFIG_ENC28J60_WRITEVERIFY is not set +# CONFIG_ETHOC is not set +CONFIG_SMC911X=y +CONFIG_SMSC911X=y +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AT76C50X_USB is not set +CONFIG_USB_ZD1201=y +CONFIG_USB_NET_RNDIS_WLAN=y +CONFIG_RTL8187=y +CONFIG_RTL8187_LEDS=y +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_ATH_COMMON is not set +CONFIG_B43=y +# CONFIG_B43_SDIO is not set +CONFIG_B43_PHY_LP=y +CONFIG_B43_LEDS=y +CONFIG_B43_HWRNG=y +# CONFIG_B43_DEBUG is not set +# CONFIG_B43LEGACY is not set +CONFIG_HOSTAP=y +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +# CONFIG_IWM is not set +CONFIG_LIBERTAS=y +CONFIG_LIBERTAS_USB=y +# CONFIG_LIBERTAS_SDIO is not set +# CONFIG_LIBERTAS_SPI is not set +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_P54_COMMON=y +CONFIG_P54_USB=y +# CONFIG_P54_SPI is not set +CONFIG_P54_LEDS=y +CONFIG_RT2X00=y +CONFIG_RT2500USB=y +CONFIG_RT73USB=y +# CONFIG_RT2800USB is not set +CONFIG_RT2X00_LIB_USB=y +CONFIG_RT2X00_LIB=y +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +# CONFIG_RT2X00_DEBUG is not set +# CONFIG_WL12XX is not set +CONFIG_ZD1211RW=y +# CONFIG_ZD1211RW_DEBUG is not set + +# +# WiMAX Wireless Broadband devices +# +# CONFIG_WIMAX_I2400M_USB is not set +# CONFIG_WIMAX_I2400M_SDIO is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=y +CONFIG_USB_KAWETH=y +CONFIG_USB_PEGASUS=y +CONFIG_USB_RTL8150=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_CDC_EEM is not set +CONFIG_USB_NET_DM9601=y +CONFIG_USB_NET_SMSC95XX=y +CONFIG_USB_NET_GL620A=y +CONFIG_USB_NET_NET1080=y +CONFIG_USB_NET_PLUSB=y +CONFIG_USB_NET_MCS7830=y +CONFIG_USB_NET_RNDIS_HOST=y +CONFIG_USB_NET_CDC_SUBSET=y +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=y +# CONFIG_USB_NET_INT51X1 is not set +# CONFIG_WAN is not set +CONFIG_ATM_DRIVERS=y +# CONFIG_ATM_DUMMY is not set +# CONFIG_ATM_TCP is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOATM is not set +CONFIG_PPPOL2TP=m +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_TWL4030 is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_TWL4030_PWRBUTTON=y +CONFIG_INPUT_UINPUT=y +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=m +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +# CONFIG_TWL4030_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=y +CONFIG_SSB_SDIOHOST_POSSIBLE=y +# CONFIG_SSB_SDIOHOST is not set +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +CONFIG_TWL4030_POWER=y +CONFIG_TWL4030_CODEC=y +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEOBUF_DVB=m +CONFIG_VIDEO_IR=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_IR_I2C=m +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_MT9V011=m +CONFIG_VIDEO_SAA711X=m +CONFIG_VIDEO_TVP5150=m +CONFIG_VIDEO_CX25840=m +CONFIG_VIDEO_CX2341X=m +CONFIG_VIDEO_VIVI=m +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_AU0828 is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +# CONFIG_USB_GL860 is not set +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +# CONFIG_USB_GSPCA_JEILINJ is not set +CONFIG_USB_GSPCA_MARS=m +# CONFIG_USB_GSPCA_MR97310A is not set +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7311=m +# CONFIG_USB_GSPCA_SN9C20X is not set +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_ZC3XX=m +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +CONFIG_VIDEO_HDPVR=m +CONFIG_VIDEO_EM28XX=m +CONFIG_VIDEO_EM28XX_ALSA=m +CONFIG_VIDEO_EM28XX_DVB=m +CONFIG_VIDEO_CX231XX=m +# CONFIG_VIDEO_CX231XX_ALSA is not set +CONFIG_VIDEO_CX231XX_DVB=m +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_QUICKCAM_MESSENGER=m +CONFIG_USB_ET61X251=m +CONFIG_VIDEO_OVCAMCHIP=m +CONFIG_USB_W9968CF=m +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +CONFIG_USB_ZC0301=m +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +CONFIG_USB_ZR364XX=m +CONFIG_USB_STKWEBCAM=m +CONFIG_USB_S2255=m +CONFIG_RADIO_ADAPTERS=y +# CONFIG_I2C_SI4713 is not set +# CONFIG_RADIO_SI4713 is not set +# CONFIG_USB_DSBR is not set +# CONFIG_RADIO_SI470X is not set +# CONFIG_USB_MR800 is not set +# CONFIG_RADIO_TEA5764 is not set +CONFIG_DVB_MAX_ADAPTERS=8 +CONFIG_DVB_DYNAMIC_MINORS=y +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Supported USB Adapters +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +CONFIG_DVB_USB_DW2102=m +CONFIG_DVB_USB_CINERGY_T2=m +CONFIG_DVB_USB_ANYSEE=m +CONFIG_DVB_USB_DTV5100=m +CONFIG_DVB_USB_AF9015=m +# CONFIG_DVB_USB_CE6230 is not set +# CONFIG_DVB_USB_FRIIO is not set +# CONFIG_SMS_SIANO_MDTV is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +CONFIG_DVB_B2C2_FLEXCOP=m +CONFIG_DVB_B2C2_FLEXCOP_USB=m +# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set + +# +# Supported DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10039=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TUNER_CX24113=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_SI21XX=m +CONFIG_DVB_CX22702=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m +CONFIG_DVB_NXT200X=m +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_S5H1411=m +CONFIG_DVB_DIB8000=m +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_LNBP21=m +CONFIG_DVB_ISL6421=m +CONFIG_DVB_LGS8GL5=m +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_TMIO is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_OMAP_LCD_VGA is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_OMAP2_VRAM=y +CONFIG_OMAP2_VRFB=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_VRAM_SIZE=14 +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y +# CONFIG_OMAP2_DSS_RFBI is not set +CONFIG_OMAP2_DSS_VENC=y +# CONFIG_OMAP2_DSS_SDI is not set +CONFIG_OMAP2_DSS_DSI=y +CONFIG_OMAP2_DSS_USE_DSI_PLL=y +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=1 +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC=y +CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C=y +CONFIG_PANEL_SHARP_LS037V7DW01=y +# CONFIG_PANEL_TAAL is not set +# CONFIG_PANEL_TOPPOLY_TDO35S is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_RAWMIDI_SEQ=m +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_MCBSP=y +# CONFIG_SND_OMAP_SOC_OVERO is not set +# CONFIG_SND_OMAP_SOC_OMAP3EVM is not set +# CONFIG_SND_OMAP_SOC_OMAP3_PANDORA is not set +CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y +# CONFIG_SND_OMAP_SOC_ZOOM2 is not set +# CONFIG_SND_OMAP_SOC_IGEP0020 is not set +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_TWL4030=y +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +# CONFIG_HID_DRAGONRISE is not set +CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set +CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +CONFIG_HID_TOPSEED=y +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_U132_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP210X is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_FUNSOFT=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MOTOROLA=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +# CONFIG_USB_SERIAL_QUALCOMM is not set +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIEMENS_MPI=m +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +# CONFIG_USB_SERIAL_SYMBOL is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_BERRY_CHARGE=m +CONFIG_USB_LED=m +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +# CONFIG_USB_APPLEDISPLAY is not set +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +CONFIG_USB_LD=m +CONFIG_USB_TRANCEVIBRATOR=m +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +CONFIG_USB_VST=m +CONFIG_USB_ATM=m +CONFIG_USB_SPEEDTOUCH=m +CONFIG_USB_CXACRU=m +CONFIG_USB_UEAGLEATM=m +CONFIG_USB_XUSBATM=m +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ZERO_HNPTEST=y +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +CONFIG_USB_MIDI_GADGET=m +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +CONFIG_USB_GPIO_VBUS=y +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=m +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=m +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=m +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_USB_IP_COMMON is not set +CONFIG_W35UND=m +# CONFIG_PRISM2_USB is not set +CONFIG_ECHO=m +CONFIG_OTUS=m +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_INPUT_MIMIO is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# + +# +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection +# +# CONFIG_INPUT_GPIO is not set +# CONFIG_DST is not set +# CONFIG_POHMELFS is not set +# CONFIG_PLAN9AUTH is not set +# CONFIG_LINE6_USB is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_SERIAL_QUATECH_USB2 is not set +# CONFIG_VT6656 is not set +# CONFIG_FB_UDL is not set + +# +# RAR Register Driver +# +# CONFIG_RAR_REGISTER is not set +# CONFIG_IIO is not set +# CONFIG_STRIP is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=m +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +CONFIG_REISERFS_PROC_INFO=y +CONFIG_REISERFS_FS_XATTR=y +# CONFIG_REISERFS_FS_POSIX_ACL is not set +# CONFIG_REISERFS_FS_SECURITY is not set +CONFIG_JFS_FS=m +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +CONFIG_GFS2_FS=m +# CONFIG_GFS2_FS_LOCKING_DLM is not set +CONFIG_OCFS2_FS=m +CONFIG_OCFS2_FS_O2CB=m +CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +CONFIG_OCFS2_FS_STATS=y +CONFIG_OCFS2_DEBUG_MASKLOG=y +# CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +CONFIG_BTRFS_FS=m +# CONFIG_BTRFS_FS_POSIX_ACL is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +CONFIG_ADFS_FS=m +# CONFIG_ADFS_FS_RW is not set +CONFIG_AFFS_FS=m +# CONFIG_ECRYPT_FS is not set +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +# CONFIG_BEFS_DEBUG is not set +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +# CONFIG_JFFS2_CMODE_PRIORITY is not set +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_JFFS2_CMODE_FAVOURLZO=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_XATTR=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m +CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DFS_UPCALL is not set +CONFIG_CIFS_EXPERIMENTAL=y +CONFIG_NCP_FS=m +# CONFIG_NCPFS_PACKET_SIGNING is not set +# CONFIG_NCPFS_IOCTL_LOCKING is not set +# CONFIG_NCPFS_STRONG is not set +# CONFIG_NCPFS_NFS_NS is not set +# CONFIG_NCPFS_OS2_NS is not set +# CONFIG_NCPFS_SMALLDOS is not set +# CONFIG_NCPFS_NLS is not set +# CONFIG_NCPFS_EXTRAS is not set +CONFIG_CODA_FS=m +CONFIG_AFS_FS=m +# CONFIG_AFS_DEBUG is not set +CONFIG_9P_FS=m + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_LDM_PARTITION=y +CONFIG_LDM_DEBUG=y +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +CONFIG_DLM=m +# CONFIG_DLM_DEBUG is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set +# CONFIG_OC_ETM is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch new file mode 100644 index 0000000000..423b29f841 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch @@ -0,0 +1,159 @@ +From 971595be3dc245cfa095747263b94535d27a3f1c Mon Sep 17 00:00:00 2001 +From: Mike Rapoport +Date: Tue, 1 Dec 2009 12:14:10 +0200 +Subject: [PATCH 1/6] OMAP: DSS2: add Toppoly TDO35S panel + +Signed-off-by: Mike Rapoport +--- + drivers/video/omap2/displays/Kconfig | 6 + + drivers/video/omap2/displays/Makefile | 1 + + .../video/omap2/displays/panel-toppoly-tdo35s.c | 112 ++++++++++++++++++++ + 3 files changed, 119 insertions(+), 0 deletions(-) + create mode 100644 drivers/video/omap2/displays/panel-toppoly-tdo35s.c + +diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig +index 79d2861..0d0d4f3 100644 +--- a/drivers/video/omap2/displays/Kconfig ++++ b/drivers/video/omap2/displays/Kconfig +@@ -25,4 +25,10 @@ config PANEL_TAAL + help + Taal DSI command mode panel from TPO. + ++config PANEL_TOPPOLY_TDO35S ++ tristate "Toppoly TDO35S LCD Panel support" ++ depends on OMAP2_DSS ++ help ++ LCD Panel used in CM-T35 ++ + endmenu +diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile +index d44e765..e299454 100644 +--- a/drivers/video/omap2/displays/Makefile ++++ b/drivers/video/omap2/displays/Makefile +@@ -3,3 +3,4 @@ obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o + obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o + + obj-$(CONFIG_PANEL_TAAL) += panel-taal.o ++obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o +\ No newline at end of file +diff --git a/drivers/video/omap2/displays/panel-toppoly-tdo35s.c b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c +new file mode 100644 +index 0000000..e744b8c +--- /dev/null ++++ b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c +@@ -0,0 +1,112 @@ ++/* ++ * LCD panel driver for Toppoly TDO35S ++ * ++ * Copyright (C) 2009 CompuLab, Ltd. ++ * Author: Mike Rapoport ++ * ++ * Based on generic panel support ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++ ++#include ++ ++static struct omap_video_timings toppoly_tdo_panel_timings = { ++ /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ ++ .x_res = 480, ++ .y_res = 640, ++ ++ .pixel_clock = 26000, ++ ++ .hfp = 104, ++ .hsw = 8, ++ .hbp = 8, ++ ++ .vfp = 4, ++ .vsw = 2, ++ .vbp = 2, ++}; ++ ++static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev) ++{ ++ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | ++ OMAP_DSS_LCD_IHS; ++ dssdev->panel.timings = toppoly_tdo_panel_timings; ++ ++ return 0; ++} ++ ++static void toppoly_tdo_panel_remove(struct omap_dss_device *dssdev) ++{ ++} ++ ++static int toppoly_tdo_panel_enable(struct omap_dss_device *dssdev) ++{ ++ int r = 0; ++ ++ if (dssdev->platform_enable) ++ r = dssdev->platform_enable(dssdev); ++ ++ return r; ++} ++ ++static void toppoly_tdo_panel_disable(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->platform_disable) ++ dssdev->platform_disable(dssdev); ++} ++ ++static int toppoly_tdo_panel_suspend(struct omap_dss_device *dssdev) ++{ ++ toppoly_tdo_panel_disable(dssdev); ++ return 0; ++} ++ ++static int toppoly_tdo_panel_resume(struct omap_dss_device *dssdev) ++{ ++ return toppoly_tdo_panel_enable(dssdev); ++} ++ ++static struct omap_dss_driver generic_driver = { ++ .probe = toppoly_tdo_panel_probe, ++ .remove = toppoly_tdo_panel_remove, ++ ++ .enable = toppoly_tdo_panel_enable, ++ .disable = toppoly_tdo_panel_disable, ++ .suspend = toppoly_tdo_panel_suspend, ++ .resume = toppoly_tdo_panel_resume, ++ ++ .driver = { ++ .name = "toppoly_tdo35s_panel", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init toppoly_tdo_panel_drv_init(void) ++{ ++ return omap_dss_register_driver(&generic_driver); ++} ++ ++static void __exit toppoly_tdo_panel_drv_exit(void) ++{ ++ omap_dss_unregister_driver(&generic_driver); ++} ++ ++module_init(toppoly_tdo_panel_drv_init); ++module_exit(toppoly_tdo_panel_drv_exit); ++MODULE_LICENSE("GPL"); +-- +1.6.4.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch new file mode 100644 index 0000000000..b540987af0 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch @@ -0,0 +1,30 @@ +From 8a2cbbaa60ea06370d2a6d9303b1aab54cdb8a69 Mon Sep 17 00:00:00 2001 +From: Mike Rapoport +Date: Tue, 24 Nov 2009 10:09:35 +0200 +Subject: [PATCH] backlight: tdo24m: ensure chip select changes between transfers + +Some SPI host drivers do not change chip select betwen transfers unless +.cs_chnage field is explicitly set. The LCD spec requires chip select +change between consecuitive transfers, so ensure it at the SPI driver +level. + +Signed-off-by: Mike Rapoport +--- + drivers/video/backlight/tdo24m.c | 1 + + 1 files changed, 1 insertions(+), 0 deletions(-) + +diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c +index bbfb502..4a3d46e 100644 +--- a/drivers/video/backlight/tdo24m.c ++++ b/drivers/video/backlight/tdo24m.c +@@ -367,6 +367,7 @@ static int __devinit tdo24m_probe(struct spi_device *spi) + + spi_message_init(m); + ++ x->cs_change = 1; + x->tx_buf = &lcd->buf[0]; + spi_message_add_tail(x, m); + +-- +1.6.4.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0001-omap3-cm-t35-add-mux-initialization.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0001-omap3-cm-t35-add-mux-initialization.patch new file mode 100644 index 0000000000..07f901c9a6 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0001-omap3-cm-t35-add-mux-initialization.patch @@ -0,0 +1,153 @@ +Date: Wed, 09 Dec 2009 15:22:20 +0200 +From: Mike Rapoport +To: Koen Kooi +Subject: Re: linux-omap 2.6.32 updates + + +Mike Rapoport wrote: +>> The tdo24m patch is indeed in the linux-omap tree and the mux patch should be +>> different for the updated linux-omap (at least with +>> SRCREV = "6833f1a8cdcb65a370f898bde6b6af63f81962df"). +>> +>> Attached the actual patch needed to initialize cm-t35 mux and updated recipe +>> diff that uses this patch. +>> +>> I don't know yet if Tony is going to merge my latest patches before the merge +>> window closes. If you're going to bump SRCREV once again in the next few days, +>> it's possible that cm-t35 patches won't be needed at all. + +-- +Sincerely yours, +Mike. + + +diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig +index 16c0c13..66de47b 100644 +--- a/arch/arm/mach-omap2/Kconfig ++++ b/arch/arm/mach-omap2/Kconfig +@@ -136,6 +136,7 @@ config MACH_CM_T35 + bool "CompuLab CM-T35 module" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CUS ++ select OMAP_MUX + + config MACH_IGEP0020 + bool "IGEP0020" +diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c +index 507c922..1591aae 100644 +--- a/arch/arm/mach-omap2/board-cm-t35.c ++++ b/arch/arm/mach-omap2/board-cm-t35.c +@@ -482,13 +482,98 @@ static void __init cm_t35_map_io(void) + omap2_map_common_io(); + } + +-#ifdef CONFIG_OMAP_MUX + static struct omap_board_mux board_mux[] __initdata = { ++ /* nCS and IRQ for CM-T35 ethernet */ ++ OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0), ++ OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), ++ ++ /* nCS and IRQ for SB-T35 ethernet */ ++ OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0), ++ OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), ++ ++ /* PENDOWN GPIO */ ++ OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), ++ ++ /* mUSB */ ++ OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ ++ /* MMC 2 */ ++ OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), ++ ++ /* McSPI 1 */ ++ OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), ++ ++ /* McSPI 4 */ ++ OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), ++ OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), ++ OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), ++ OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP), ++ ++ /* McBSP 2 */ ++ OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ ++ /* serial ports */ ++ OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), ++ OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), ++ ++ /* DSS */ ++ OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), ++ ++ /* TPS IRQ */ ++ OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \ ++ OMAP_PIN_INPUT_PULLUP), ++ + { .reg_offset = OMAP_MUX_TERMINATOR }, + }; +-#else +-#define board_mux NULL +-#endif + + static void __init cm_t35_init(void) + { +@@ -501,9 +586,6 @@ static void __init cm_t35_init(void) + cm_t35_init_led(); + + usb_musb_init(); +- +- omap_mux_init_signal("sys_nirq", +- OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); + } + + MACHINE_START(CM_T35, "Compulab CM-T35") + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch new file mode 100644 index 0000000000..199e89bc93 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch @@ -0,0 +1,307 @@ +From 7d601fa33c5475bcd3035df797a3cbe40cc542d4 Mon Sep 17 00:00:00 2001 +From: Mike Rapoport +Date: Tue, 1 Dec 2009 13:09:28 +0200 +Subject: [PATCH 2/6] omap3: cm-t35: add DSS2 display support + +Signed-off-by: Mike Rapoport +--- + arch/arm/mach-omap2/board-cm-t35.c | 234 +++++++++++++++++++++++++++++++++++- + 1 files changed, 233 insertions(+), 1 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c +index 22c4529..2d7a819 100644 +--- a/arch/arm/mach-omap2/board-cm-t35.c ++++ b/arch/arm/mach-omap2/board-cm-t35.c +@@ -32,6 +32,9 @@ + #include + #include + ++#include ++#include ++ + #include + #include + #include +@@ -42,6 +45,7 @@ + #include + #include + #include ++#include + + #include + +@@ -248,7 +252,6 @@ static inline void cm_t35_init_nand(void) {} + + #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +-#include + #include + + #include +@@ -304,6 +307,193 @@ static void __init cm_t35_init_ads7846(void) + static inline void cm_t35_init_ads7846(void) {} + #endif + ++#define CM_T35_LCD_EN_GPIO 157 ++#define CM_T35_LCD_BL_GPIO 58 ++#define CM_T35_DVI_EN_GPIO 54 ++ ++static int lcd_bl_gpio; ++static int lcd_en_gpio; ++static int dvi_en_gpio; ++ ++static int lcd_enabled; ++static int dvi_enabled; ++ ++static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev) ++{ ++ if (dvi_enabled) { ++ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); ++ return -EINVAL; ++ } ++ ++ gpio_set_value(lcd_en_gpio, 1); ++ gpio_set_value(lcd_bl_gpio, 1); ++ ++ lcd_enabled = 1; ++ ++ return 0; ++} ++ ++static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev) ++{ ++ lcd_enabled = 0; ++ ++ gpio_set_value(lcd_bl_gpio, 0); ++ gpio_set_value(lcd_en_gpio, 0); ++} ++ ++static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) ++{ ++ if (lcd_enabled) { ++ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); ++ return -EINVAL; ++ } ++ ++ gpio_set_value(dvi_en_gpio, 0); ++ dvi_enabled = 1; ++ ++ return 0; ++} ++ ++static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev) ++{ ++ gpio_set_value(dvi_en_gpio, 1); ++ dvi_enabled = 0; ++} ++ ++static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev) ++{ ++ return 0; ++} ++ ++static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev) ++{ ++} ++ ++static struct omap_dss_device cm_t35_lcd_device = { ++ .name = "lcd", ++ .driver_name = "toppoly_tdo35s_panel", ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .phy.dpi.data_lines = 18, ++ .platform_enable = cm_t35_panel_enable_lcd, ++ .platform_disable = cm_t35_panel_disable_lcd, ++}; ++ ++static struct omap_dss_device cm_t35_dvi_device = { ++ .name = "dvi", ++ .driver_name = "generic_panel", ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .phy.dpi.data_lines = 24, ++ .platform_enable = cm_t35_panel_enable_dvi, ++ .platform_disable = cm_t35_panel_disable_dvi, ++}; ++ ++static struct omap_dss_device cm_t35_tv_device = { ++ .name = "tv", ++ .driver_name = "venc", ++ .type = OMAP_DISPLAY_TYPE_VENC, ++ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, ++ .platform_enable = cm_t35_panel_enable_tv, ++ .platform_disable = cm_t35_panel_disable_tv, ++}; ++ ++static struct omap_dss_device *cm_t35_dss_devices[] = { ++ &cm_t35_lcd_device, ++ &cm_t35_dvi_device, ++ &cm_t35_tv_device, ++}; ++ ++static struct omap_dss_board_info cm_t35_dss_data = { ++ .num_devices = ARRAY_SIZE(cm_t35_dss_devices), ++ .devices = cm_t35_dss_devices, ++ .default_device = &cm_t35_dvi_device, ++}; ++ ++static struct platform_device cm_t35_dss_device = { ++ .name = "omapdss", ++ .id = -1, ++ .dev = { ++ .platform_data = &cm_t35_dss_data, ++ }, ++}; ++ ++static struct omap2_mcspi_device_config tdo24m_mcspi_config = { ++ .turbo_mode = 0, ++ .single_channel = 1, /* 0: slave, 1: master */ ++}; ++ ++static struct tdo24m_platform_data tdo24m_config = { ++ .model = TDO35S, ++}; ++ ++static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { ++ { ++ .modalias = "tdo24m", ++ .bus_num = 4, ++ .chip_select = 0, ++ .max_speed_hz = 1000000, ++ .controller_data = &tdo24m_mcspi_config, ++ .platform_data = &tdo24m_config, ++ }, ++}; ++ ++static void __init cm_t35_display_init(void) ++{ ++ int err; ++ ++ lcd_en_gpio = CM_T35_LCD_EN_GPIO; ++ lcd_bl_gpio = CM_T35_LCD_BL_GPIO; ++ dvi_en_gpio = CM_T35_DVI_EN_GPIO; ++ ++ spi_register_board_info(cm_t35_lcd_spi_board_info, ++ ARRAY_SIZE(cm_t35_lcd_spi_board_info)); ++ ++ err = gpio_request(lcd_en_gpio, "LCD RST"); ++ if (err) { ++ pr_err("CM-T35: failed to get LCD reset GPIO\n"); ++ goto out; ++ } ++ ++ err = gpio_request(lcd_bl_gpio, "LCD BL"); ++ if (err) { ++ pr_err("CM-T35: failed to get LCD backlight control GPIO\n"); ++ goto err_lcd_bl; ++ } ++ ++ err = gpio_request(dvi_en_gpio, "DVI EN"); ++ if (err) { ++ pr_err("CM-T35: failed to get DVI reset GPIO\n"); ++ goto err_dvi_en; ++ } ++ ++ gpio_export(lcd_en_gpio, 0); ++ gpio_export(lcd_bl_gpio, 0); ++ gpio_export(dvi_en_gpio, 0); ++ gpio_direction_output(lcd_en_gpio, 0); ++ gpio_direction_output(lcd_bl_gpio, 0); ++ gpio_direction_output(dvi_en_gpio, 1); ++ ++ msleep(50); ++ gpio_set_value(lcd_en_gpio, 1); ++ ++ err = platform_device_register(&cm_t35_dss_device); ++ if (err) { ++ pr_err("CM-T35: failed to register DSS device\n"); ++ goto err_dev_reg; ++ } ++ ++ return; ++ ++err_dev_reg: ++ gpio_free(dvi_en_gpio); ++err_dvi_en: ++ gpio_free(lcd_bl_gpio); ++err_lcd_bl: ++ gpio_free(lcd_en_gpio); ++out: ++ ++ return; ++} ++ + static struct regulator_consumer_supply cm_t35_vmmc1_supply = { + .supply = "vmmc", + }; +@@ -312,6 +502,16 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = { + .supply = "vmmc_aux", + }; + ++static struct regulator_consumer_supply cm_t35_vdac_supply = { ++ .supply = "vdda_dac", ++ .dev = &cm_t35_dss_device.dev, ++}; ++ ++static struct regulator_consumer_supply cm_t35_vdvi_supply = { ++ .supply = "vdvi", ++ .dev = &cm_t35_dss_device.dev, ++}; ++ + /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ + static struct regulator_init_data cm_t35_vmmc1 = { + .constraints = { +@@ -342,6 +542,35 @@ static struct regulator_init_data cm_t35_vsim = { + .consumer_supplies = &cm_t35_vsim_supply, + }; + ++/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ ++static struct regulator_init_data cm_t35_vdac = { ++ .constraints = { ++ .min_uV = 1800000, ++ .max_uV = 1800000, ++ .valid_modes_mask = REGULATOR_MODE_NORMAL ++ | REGULATOR_MODE_STANDBY, ++ .valid_ops_mask = REGULATOR_CHANGE_MODE ++ | REGULATOR_CHANGE_STATUS, ++ }, ++ .num_consumer_supplies = 1, ++ .consumer_supplies = &cm_t35_vdac_supply, ++}; ++ ++/* VPLL2 for digital video outputs */ ++static struct regulator_init_data cm_t35_vpll2 = { ++ .constraints = { ++ .name = "VDVI", ++ .min_uV = 1800000, ++ .max_uV = 1800000, ++ .valid_modes_mask = REGULATOR_MODE_NORMAL ++ | REGULATOR_MODE_STANDBY, ++ .valid_ops_mask = REGULATOR_CHANGE_MODE ++ | REGULATOR_CHANGE_STATUS, ++ }, ++ .num_consumer_supplies = 1, ++ .consumer_supplies = &cm_t35_vdvi_supply, ++}; ++ + static struct twl4030_usb_data cm_t35_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, + }; +@@ -445,6 +674,8 @@ static struct twl4030_platform_data cm_t35_twldata = { + .gpio = &cm_t35_gpio_data, + .vmmc1 = &cm_t35_vmmc1, + .vsim = &cm_t35_vsim, ++ .vdac = &cm_t35_vdac, ++ .vpll2 = &cm_t35_vpll2, + }; + + static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = { +@@ -490,6 +721,7 @@ static void __init cm_t35_init(void) + cm_t35_init_ads7846(); + cm_t35_init_ethernet(); + cm_t35_init_led(); ++ cm_t35_display_init(); + + usb_musb_init(); + +-- +1.6.4.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch new file mode 100644 index 0000000000..dc1e5270c9 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch @@ -0,0 +1,145 @@ +From 10cd78db62cbda2f9db1c53d459ee03a35b84662 Mon Sep 17 00:00:00 2001 +From: Mike Rapoport +Date: Tue, 1 Dec 2009 13:16:02 +0200 +Subject: [PATCH 3/6] omap3: cm-t35: update defconfig for DSS2 + +Signed-off-by: Mike Rapoport +--- + arch/arm/configs/cm_t35_defconfig | 82 +++++++++++++++++++++++++++++++++++-- + 1 files changed, 78 insertions(+), 4 deletions(-) + +diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig +index e42c5c8..bd6f882 100644 +--- a/arch/arm/configs/cm_t35_defconfig ++++ b/arch/arm/configs/cm_t35_defconfig +@@ -1,7 +1,7 @@ + # + # Automatically generated make config: don't edit +-# Linux kernel version: 2.6.32-rc4 +-# Tue Oct 13 17:10:40 2009 ++# Linux kernel version: 2.6.32-rc8 ++# Tue Dec 1 12:08:44 2009 + # + CONFIG_ARM=y + CONFIG_SYS_SUPPORTS_APM_EMULATION=y +@@ -215,6 +215,7 @@ CONFIG_OMAP_DM_TIMER=y + # CONFIG_OMAP_LL_DEBUG_UART1 is not set + # CONFIG_OMAP_LL_DEBUG_UART2 is not set + CONFIG_OMAP_LL_DEBUG_UART3=y ++# CONFIG_OMAP_LL_DEBUG_NONE is not set + # CONFIG_OMAP_PM_NONE is not set + CONFIG_OMAP_PM_NOOP=y + CONFIG_ARCH_OMAP34XX=y +@@ -227,11 +228,15 @@ CONFIG_ARCH_OMAP3430=y + # CONFIG_MACH_OMAP_LDP is not set + # CONFIG_MACH_OVERO is not set + # CONFIG_MACH_OMAP3EVM is not set ++# CONFIG_MACH_OMAP3517EVM is not set + # CONFIG_MACH_OMAP3_PANDORA is not set + # CONFIG_MACH_OMAP_3430SDP is not set + # CONFIG_MACH_NOKIA_RX51 is not set + # CONFIG_MACH_OMAP_ZOOM2 is not set ++# CONFIG_MACH_OMAP_ZOOM3 is not set + CONFIG_MACH_CM_T35=y ++# CONFIG_MACH_IGEP0020 is not set ++# CONFIG_MACH_OMAP_3630SDP is not set + + # + # Processor Type +@@ -963,6 +968,7 @@ CONFIG_SSB_POSSIBLE=y + # CONFIG_TPS65010 is not set + CONFIG_TWL4030_CORE=y + # CONFIG_TWL4030_POWER is not set ++# CONFIG_TWL4030_CODEC is not set + # CONFIG_MFD_TMIO is not set + # CONFIG_MFD_T7L66XB is not set + # CONFIG_MFD_TC6387XB is not set +@@ -993,8 +999,66 @@ CONFIG_REGULATOR_TWL4030=y + # + # CONFIG_VGASTATE is not set + # CONFIG_VIDEO_OUTPUT_CONTROL is not set +-# CONFIG_FB is not set +-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++# CONFIG_FB_BROADSHEET is not set ++# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set ++CONFIG_OMAP2_VRAM=y ++CONFIG_OMAP2_VRFB=y ++CONFIG_OMAP2_DSS=y ++CONFIG_OMAP2_VRAM_SIZE=4 ++CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y ++# CONFIG_OMAP2_DSS_RFBI is not set ++CONFIG_OMAP2_DSS_VENC=y ++# CONFIG_OMAP2_DSS_SDI is not set ++# CONFIG_OMAP2_DSS_DSI is not set ++# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set ++CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 ++CONFIG_FB_OMAP2=y ++CONFIG_FB_OMAP2_DEBUG_SUPPORT=y ++# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set ++CONFIG_FB_OMAP2_NUM_FBS=3 ++ ++# ++# OMAP2/3 Display Device Drivers ++# ++CONFIG_PANEL_GENERIC=y ++# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set ++# CONFIG_PANEL_SHARP_LS037V7DW01 is not set ++CONFIG_PANEL_TOPPOLY_TDO35S=y ++CONFIG_BACKLIGHT_LCD_SUPPORT=y ++CONFIG_LCD_CLASS_DEVICE=y ++# CONFIG_LCD_LMS283GF05 is not set ++# CONFIG_LCD_LTV350QV is not set ++# CONFIG_LCD_ILI9320 is not set ++CONFIG_LCD_TDO24M=y ++# CONFIG_LCD_VGG2432A4 is not set ++# CONFIG_LCD_PLATFORM is not set ++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set + + # + # Display device support +@@ -1006,6 +1070,16 @@ CONFIG_REGULATOR_TWL4030=y + # + # CONFIG_VGA_CONSOLE is not set + CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set ++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set ++# CONFIG_FONTS is not set ++CONFIG_FONT_8x8=y ++CONFIG_FONT_8x16=y ++CONFIG_LOGO=y ++CONFIG_LOGO_LINUX_MONO=y ++CONFIG_LOGO_LINUX_VGA16=y ++CONFIG_LOGO_LINUX_CLUT224=y + # CONFIG_SOUND is not set + CONFIG_HID_SUPPORT=y + CONFIG_HID=y +-- +1.6.4.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch new file mode 100644 index 0000000000..ff8b50b1c9 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch @@ -0,0 +1,427 @@ +From a1a572a6b020996155fa3fd7e70a96299b37cf30 Mon Sep 17 00:00:00 2001 +From: Mike Rapoport +Date: Mon, 7 Dec 2009 10:27:48 +0200 +Subject: [PATCH 4/6] omap3: cm-t35: add cm-t35 mux configs + +Signed-off-by: Mike Rapoport +--- + arch/arm/mach-omap2/board-cm-t35.c | 94 +++++++++++++++++++ + arch/arm/mach-omap2/mux.c | 158 ++++++++++++++++++++++++++++++++- + arch/arm/plat-omap/include/plat/mux.h | 86 ++++++++++++++++++ + 3 files changed, 337 insertions(+), 1 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c +index 2d7a819..3e54499 100644 +--- a/arch/arm/mach-omap2/board-cm-t35.c ++++ b/arch/arm/mach-omap2/board-cm-t35.c +@@ -693,6 +693,99 @@ static void __init cm_t35_init_i2c(void) + ARRAY_SIZE(cm_t35_i2c_boardinfo)); + } + ++static void __init cm_t35_init_mux(void) ++{ ++ /* nCS and IRQ mux for CM-T35 ethernet */ ++ omap_cfg_reg(G5_34XX_GPMC_NCS5); ++ omap_cfg_reg(A23_34XX_GPIO163_UP); ++ ++ /* nCS, IRQ and reset mux for SB-T35 ethernet */ ++ omap_cfg_reg(F4_34XX_GPMC_NCS4); ++ omap_cfg_reg(N21_34XX_GPIO127_UP); ++ omap_cfg_reg(B23_34XX_GPIO164_OUT); ++ ++ /* PENDOWN GPIO */ ++ omap_cfg_reg(F3_34XX_GPIO57_UP); ++ ++ /* mUSB */ ++ omap_cfg_reg(R21_3430_USB0HS_PHY_CLK); ++ omap_cfg_reg(R23_3430_USB0HS_PHY_STP); ++ omap_cfg_reg(P23_3430_USB0HS_PHY_DIR); ++ omap_cfg_reg(R22_3430_USB0HS_PHY_NXT); ++ omap_cfg_reg(T24_3430_USB0HS_PHY_DATA0); ++ omap_cfg_reg(T23_3430_USB0HS_PHY_DATA1); ++ omap_cfg_reg(U24_3430_USB0HS_PHY_DATA2); ++ omap_cfg_reg(U23_3430_USB0HS_PHY_DATA3); ++ omap_cfg_reg(W24_3430_USB0HS_PHY_DATA4); ++ omap_cfg_reg(V23_3430_USB0HS_PHY_DATA5); ++ omap_cfg_reg(W23_3430_USB0HS_PHY_DATA6); ++ omap_cfg_reg(T22_3430_USB0HS_PHY_DATA7); ++ ++ /* MMC 2 */ ++ omap_cfg_reg(AB2_3430_MMC2_DIR_DAT0); ++ omap_cfg_reg(AA2_3430_MMC2_DIR_DAT1); ++ omap_cfg_reg(Y2_3430_MMC2_DIR_CMD); ++ omap_cfg_reg(AA1_3420_MMC2_CLKIN); ++ ++ /* McSPI 1 */ ++ omap_cfg_reg(T5_34XX_MCSPI1_CLK); ++ omap_cfg_reg(R4_34XX_MCSPI1_SIMO); ++ omap_cfg_reg(T4_34XX_MCSPI1_SOMI); ++ omap_cfg_reg(T6_34XX_MCSPI1_CS0); ++ ++ /* McBSP 2 */ ++ omap_cfg_reg(V20_34XX_MCBSP2_FSX); ++ omap_cfg_reg(T21_34XX_MCBSP2_CLKX); ++ omap_cfg_reg(V19_34XX_MCBSP2_DR); ++ omap_cfg_reg(R20_34XX_MCBSP2_DX); ++ ++ omap_cfg_reg(F21_34XX_GPIO109_OUT); ++ ++ /* serial ports */ ++ omap_cfg_reg(W4_34XX_UART2_TX); ++ omap_cfg_reg(V4_34XX_UART2_RX); ++ omap_cfg_reg(W7_34XX_UART1_TX); ++ omap_cfg_reg(V7_34XX_UART1_RX); ++ ++ /* display controls */ ++ omap_cfg_reg(U8_34XX_GPIO54_OUT); ++ omap_cfg_reg(G4_34XX_GPIO58_OUT); ++/* omap_cfg_reg(??_34XX_GPIO129_OUT); */ ++ ++ /* DSS */ ++ omap_cfg_reg(G22_34XX_DSS_PCLK); ++ omap_cfg_reg(E22_34XX_DSS_HSYNC); ++ omap_cfg_reg(F22_34XX_DSS_VSYNC); ++ omap_cfg_reg(J21_34XX_DSS_ACBIAS); ++ omap_cfg_reg(AC19_34XX_DSS_DATA0); ++ omap_cfg_reg(AB19_34XX_DSS_DATA1); ++ omap_cfg_reg(AD20_34XX_DSS_DATA2); ++ omap_cfg_reg(AC20_34XX_DSS_DATA3); ++ omap_cfg_reg(AD21_34XX_DSS_DATA4); ++ omap_cfg_reg(AC21_34XX_DSS_DATA5); ++ omap_cfg_reg(D24_34XX_DSS_DATA6); ++ omap_cfg_reg(E23_34XX_DSS_DATA7); ++ omap_cfg_reg(E24_34XX_DSS_DATA8); ++ omap_cfg_reg(F23_34XX_DSS_DATA9); ++ omap_cfg_reg(AC22_34XX_DSS_DATA10); ++ omap_cfg_reg(AC23_34XX_DSS_DATA11); ++ omap_cfg_reg(AB22_34XX_DSS_DATA12); ++ omap_cfg_reg(Y22_34XX_DSS_DATA13); ++ omap_cfg_reg(W22_34XX_DSS_DATA14); ++ omap_cfg_reg(V22_34XX_DSS_DATA15); ++ omap_cfg_reg(J22_34XX_DSS_DATA16); ++ omap_cfg_reg(G23_34XX_DSS_DATA17); ++ omap_cfg_reg(G24_34XX_DSS_DATA18); ++ omap_cfg_reg(H23_34XX_DSS_DATA19); ++ omap_cfg_reg(D23_34XX_DSS_DATA20); ++ omap_cfg_reg(K22_34XX_DSS_DATA21); ++ omap_cfg_reg(V21_34XX_DSS_DATA22); ++ omap_cfg_reg(W21_34XX_DSS_DATA23); ++ ++ /* TPS IRQ */ ++ omap_cfg_reg(AF26_34XX_SYS_NIRQ); ++} ++ + static struct omap_board_config_kernel cm_t35_config[] __initdata = { + }; + +@@ -716,6 +809,7 @@ static void __init cm_t35_map_io(void) + static void __init cm_t35_init(void) + { + omap_serial_init(); ++ cm_t35_init_mux(); + cm_t35_init_i2c(); + cm_t35_init_nand(); + cm_t35_init_ads7846(); +diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c +index c18a94e..23eb011 100644 +--- a/arch/arm/mach-omap2/mux.c ++++ b/arch/arm/mach-omap2/mux.c +@@ -279,6 +279,33 @@ MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00, + MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) + ++/* HSUSB Port 0 */ ++MUX_CFG_34XX("R21_3430_USB0HS_PHY_CLK", 0x1a2, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("R23_3430_USB0HS_PHY_STP", 0x1a4, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT | \ ++ OMAP2_PULL_ENA | OMAP2_PULL_UP) ++MUX_CFG_34XX("P23_3430_USB0HS_PHY_DIR", 0x1a6, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("R22_3430_USB0HS_PHY_NXT", 0x1a8, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("T24_3430_USB0HS_PHY_DATA0", 0x1aa, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("T23_3430_USB0HS_PHY_DATA1", 0x1ac, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("U24_3430_USB0HS_PHY_DATA2", 0x1ae, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("U23_3430_USB0HS_PHY_DATA3", 0x1b0, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("W24_3430_USB0HS_PHY_DATA4", 0x1b2, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("V23_3430_USB0HS_PHY_DATA5", 0x1b4, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("W23_3430_USB0HS_PHY_DATA6", 0x1b6, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("T22_3430_USB0HS_PHY_DATA7", 0x1b8, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++ + /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ + MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) +@@ -541,6 +568,15 @@ MUX_CFG_34XX("AF3_3430_MMC2_DAT6", 0x168, + MUX_CFG_34XX("AE3_3430_MMC2_DAT7", 0x16A, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) + ++MUX_CFG_34XX("AB2_3430_MMC2_DIR_DAT0", 0x164, ++ OMAP34XX_MUX_MODE1 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("AA2_3430_MMC2_DIR_DAT1", 0x166, ++ OMAP34XX_MUX_MODE1 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("Y2_3430_MMC2_DIR_CMD", 0x168, ++ OMAP34XX_MUX_MODE1 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("AA1_3420_MMC2_CLKIN", 0x16a, ++ OMAP34XX_MUX_MODE1 | OMAP34XX_PIN_INPUT) ++ + /* MMC3 */ + MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8, + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) +@@ -559,13 +595,133 @@ MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2, + MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0, + OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP | + OMAP34XX_MUX_MODE0) +-/* EHCI GPIO's on OMAP3EVM (Rev >= E) */ ++ + MUX_CFG_34XX("AH14_34XX_GPIO21", 0x5ea, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) + MUX_CFG_34XX("AF9_34XX_GPIO22", 0x5ec, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) + MUX_CFG_34XX("U3_34XX_GPIO61", 0x0c8, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) ++ ++MUX_CFG_34XX("AG4_34XX_GPIO134", 0x160, ++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("U8_34XX_GPIO54", 0x0b4, ++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("AE4_34XX_GPIO136", 0x164, ++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("F3_34XX_GPIO57_UP", 0x0ba, ++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) ++MUX_CFG_34XX("G4_34XX_GPIO58_OUT", 0x0bc, ++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("W2_34XX_GPIO59", 0x0be, ++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("L1_34XX_GPIO61_OUT", 0x0c8, ++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("C2_34XX_GPIO65", 0x0d2, ++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("N21_34XX_GPIO127_UP", 0x152, ++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) ++MUX_CFG_34XX("A23_34XX_GPIO163_UP", 0x19a, ++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) ++MUX_CFG_34XX("B23_34XX_GPIO164_OUT", 0x19c, ++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("AA6_34XX_GPIO164_OUT", 0x1e2, ++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) ++ ++/* GPMC */ ++MUX_CFG_34XX("F4_34XX_GPMC_NCS4", 0x0b6, OMAP34XX_MUX_MODE0) ++MUX_CFG_34XX("G5_34XX_GPMC_NCS5", 0x0b8, OMAP34XX_MUX_MODE0) ++ ++/* McSPI 1 */ ++MUX_CFG_34XX("T5_34XX_MCSPI1_CLK", 0x1c8, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("R4_34XX_MCSPI1_SIMO", 0x1ca, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("T4_34XX_MCSPI1_SOMI", 0x1cc, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("T6_34XX_MCSPI1_CS0", 0x1ce, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLDOWN) ++ ++/* McBSP 2 */ ++MUX_CFG_34XX("V20_34XX_MCBSP2_FSX", 0x13c, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("T21_34XX_MCBSP2_CLKX", 0x13e, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("V19_34XX_MCBSP2_DR", 0x140, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("R20_34XX_MCBSP2_DX", 0x142, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++ ++MUX_CFG_34XX("F21_34XX_GPIO109_OUT", 0x12a, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++ ++/* Serial ports */ ++MUX_CFG_34XX("W4_34XX_UART2_TX", 0x170, ++ OMAP34XX_MUX_MODE1 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("V4_34XX_UART2_RX", 0x172, ++ OMAP34XX_MUX_MODE1 | OMAP34XX_PIN_INPUT) ++MUX_CFG_34XX("W7_34XX_UART1_TX", 0x17c, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("V7_34XX_UART1_RX", 0x182, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT) ++ ++/* DSS */ ++MUX_CFG_34XX("G22_34XX_DSS_PCLK", 0x0d4, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("E22_34XX_DSS_HSYNC", 0x0d6, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("F22_34XX_DSS_VSYNC", 0x0d8, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("J21_34XX_DSS_ACBIAS", 0x0da, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("AC19_34XX_DSS_DATA0", 0x0dc, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("AB19_34XX_DSS_DATA1", 0x0de, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("AD20_34XX_DSS_DATA2", 0x0e0, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("AC20_34XX_DSS_DATA3", 0x0e2, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("AD21_34XX_DSS_DATA4", 0x0e4, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("AC21_34XX_DSS_DATA5", 0x0e6, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("D24_34XX_DSS_DATA6", 0x0e8, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("E23_34XX_DSS_DATA7", 0x0ea, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("E24_34XX_DSS_DATA8", 0x0ec, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("F23_34XX_DSS_DATA9", 0x0ee, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("AC22_34XX_DSS_DATA10", 0x0f0, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("AC23_34XX_DSS_DATA11", 0x0f2, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("AB22_34XX_DSS_DATA12", 0x0f4, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("Y22_34XX_DSS_DATA13", 0x0f6, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("W22_34XX_DSS_DATA14", 0x0f8, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("V22_34XX_DSS_DATA15", 0x0fa, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("J22_34XX_DSS_DATA16", 0x0fc, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("G23_34XX_DSS_DATA17", 0x0fe, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("G24_34XX_DSS_DATA18", 0x100, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("H23_34XX_DSS_DATA19", 0x102, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("D23_34XX_DSS_DATA20", 0x104, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("K22_34XX_DSS_DATA21", 0x106, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("V21_34XX_DSS_DATA22", 0x108, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("W21_34XX_DSS_DATA23", 0x10a, ++ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) + }; + + #define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) +diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h +index ba77de6..119379c 100644 +--- a/arch/arm/plat-omap/include/plat/mux.h ++++ b/arch/arm/plat-omap/include/plat/mux.h +@@ -692,6 +692,20 @@ enum omap34xx_index { + AD26_34XX_I2C4_SCL, + AE26_34XX_I2C4_SDA, + ++ /* HSUSB Port 0 */ ++ R21_3430_USB0HS_PHY_CLK, ++ R23_3430_USB0HS_PHY_STP, ++ P23_3430_USB0HS_PHY_DIR, ++ R22_3430_USB0HS_PHY_NXT, ++ T24_3430_USB0HS_PHY_DATA0, ++ T23_3430_USB0HS_PHY_DATA1, ++ U24_3430_USB0HS_PHY_DATA2, ++ U23_3430_USB0HS_PHY_DATA3, ++ W24_3430_USB0HS_PHY_DATA4, ++ V23_3430_USB0HS_PHY_DATA5, ++ W23_3430_USB0HS_PHY_DATA6, ++ T22_3430_USB0HS_PHY_DATA7, ++ + /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ + Y8_3430_USB1HS_PHY_CLK, + Y9_3430_USB1HS_PHY_STP, +@@ -839,6 +853,11 @@ enum omap34xx_index { + AF3_3430_MMC2_DAT6, + AE3_3430_MMC2_DAT7, + ++ AB2_3430_MMC2_DIR_DAT0, ++ AA2_3430_MMC2_DIR_DAT1, ++ Y2_3430_MMC2_DIR_CMD, ++ AA1_3420_MMC2_CLKIN, ++ + /* MMC3 */ + AF10_3430_MMC3_CLK, + AC3_3430_MMC3_CMD, +@@ -854,6 +873,73 @@ enum omap34xx_index { + AH14_34XX_GPIO21, + AF9_34XX_GPIO22, + U3_34XX_GPIO61, ++ ++ AG4_34XX_GPIO134, ++ U8_34XX_GPIO54, ++ AE4_34XX_GPIO136, ++ F3_34XX_GPIO57_UP, ++ G4_34XX_GPIO58_OUT, ++ W2_34XX_GPIO59, ++ L1_34XX_GPIO61_OUT, ++ C2_34XX_GPIO65, ++ N21_34XX_GPIO127_UP, ++ A23_34XX_GPIO163_UP, ++ B23_34XX_GPIO164_OUT, ++ AA6_34XX_GPIO186_OUT, ++ ++ /* gpmc */ ++ F4_34XX_GPMC_NCS4, ++ G5_34XX_GPMC_NCS5, ++ ++ /* McSPI 1 */ ++ T5_34XX_MCSPI1_CLK, ++ R4_34XX_MCSPI1_SIMO, ++ T4_34XX_MCSPI1_SOMI, ++ T6_34XX_MCSPI1_CS0, ++ ++ /* McBSP 2 */ ++ V20_34XX_MCBSP2_FSX, ++ T21_34XX_MCBSP2_CLKX, ++ V19_34XX_MCBSP2_DR, ++ R20_34XX_MCBSP2_DX, ++ ++ F21_34XX_GPIO109_OUT, ++ ++ /* serial ports */ ++ W4_34XX_UART2_TX, ++ V4_34XX_UART2_RX, ++ W7_34XX_UART1_TX, ++ V7_34XX_UART1_RX, ++ ++ /* DSS */ ++ G22_34XX_DSS_PCLK, ++ E22_34XX_DSS_HSYNC, ++ F22_34XX_DSS_VSYNC, ++ J21_34XX_DSS_ACBIAS, ++ AC19_34XX_DSS_DATA0, ++ AB19_34XX_DSS_DATA1, ++ AD20_34XX_DSS_DATA2, ++ AC20_34XX_DSS_DATA3, ++ AD21_34XX_DSS_DATA4, ++ AC21_34XX_DSS_DATA5, ++ D24_34XX_DSS_DATA6, ++ E23_34XX_DSS_DATA7, ++ E24_34XX_DSS_DATA8, ++ F23_34XX_DSS_DATA9, ++ AC22_34XX_DSS_DATA10, ++ AC23_34XX_DSS_DATA11, ++ AB22_34XX_DSS_DATA12, ++ Y22_34XX_DSS_DATA13, ++ W22_34XX_DSS_DATA14, ++ V22_34XX_DSS_DATA15, ++ J22_34XX_DSS_DATA16, ++ G23_34XX_DSS_DATA17, ++ G24_34XX_DSS_DATA18, ++ H23_34XX_DSS_DATA19, ++ D23_34XX_DSS_DATA20, ++ K22_34XX_DSS_DATA21, ++ V21_34XX_DSS_DATA22, ++ W21_34XX_DSS_DATA23, + }; + + struct omap_mux_cfg { +-- +1.6.4.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0006-omap3-cm-t35-update-defconfig.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0006-omap3-cm-t35-update-defconfig.patch new file mode 100644 index 0000000000..a9034f08a7 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/0006-omap3-cm-t35-update-defconfig.patch @@ -0,0 +1,87 @@ +From 88f7dc4c115c57b12de7ab4170bdaaeba145283b Mon Sep 17 00:00:00 2001 +From: Mike Rapoport +Date: Mon, 7 Dec 2009 11:07:55 +0200 +Subject: [PATCH 6/6] omap3: cm-t35: update defconfig + +Signed-off-by: Mike Rapoport +--- + arch/arm/configs/cm_t35_defconfig | 28 ++++++++++++++++++++++------ + 1 files changed, 22 insertions(+), 6 deletions(-) + +diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig +index bd6f882..78eeb66 100644 +--- a/arch/arm/configs/cm_t35_defconfig ++++ b/arch/arm/configs/cm_t35_defconfig +@@ -1,7 +1,7 @@ + # + # Automatically generated make config: don't edit +-# Linux kernel version: 2.6.32-rc8 +-# Tue Dec 1 12:08:44 2009 ++# Linux kernel version: 2.6.32 ++# Mon Dec 7 10:43:46 2009 + # + CONFIG_ARM=y + CONFIG_SYS_SUPPORTS_APM_EMULATION=y +@@ -572,7 +572,15 @@ CONFIG_MTD_NAND_IDS=y + # + # UBI - Unsorted block images + # +-# CONFIG_MTD_UBI is not set ++CONFIG_MTD_UBI=y ++CONFIG_MTD_UBI_WL_THRESHOLD=4096 ++CONFIG_MTD_UBI_BEB_RESERVE=1 ++# CONFIG_MTD_UBI_GLUEBI is not set ++ ++# ++# UBI debugging options ++# ++# CONFIG_MTD_UBI_DEBUG is not set + # CONFIG_PARPORT is not set + CONFIG_BLK_DEV=y + # CONFIG_BLK_DEV_COW_COMMON is not set +@@ -1506,6 +1514,12 @@ CONFIG_JFFS2_RTIME=y + CONFIG_JFFS2_CMODE_PRIORITY=y + # CONFIG_JFFS2_CMODE_SIZE is not set + # CONFIG_JFFS2_CMODE_FAVOURLZO is not set ++CONFIG_UBIFS_FS=y ++# CONFIG_UBIFS_FS_XATTR is not set ++# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set ++CONFIG_UBIFS_FS_LZO=y ++CONFIG_UBIFS_FS_ZLIB=y ++# CONFIG_UBIFS_FS_DEBUG is not set + # CONFIG_CRAMFS is not set + # CONFIG_SQUASHFS is not set + # CONFIG_VXFS_FS is not set +@@ -1775,9 +1789,9 @@ CONFIG_CRYPTO_DES=y + # + # Compression + # +-# CONFIG_CRYPTO_DEFLATE is not set ++CONFIG_CRYPTO_DEFLATE=y + # CONFIG_CRYPTO_ZLIB is not set +-# CONFIG_CRYPTO_LZO is not set ++CONFIG_CRYPTO_LZO=y + + # + # Random Number Generation +@@ -1792,7 +1806,7 @@ CONFIG_CRYPTO_HW=y + CONFIG_BITREVERSE=y + CONFIG_GENERIC_FIND_LAST_BIT=y + CONFIG_CRC_CCITT=y +-# CONFIG_CRC16 is not set ++CONFIG_CRC16=y + # CONFIG_CRC_T10DIF is not set + # CONFIG_CRC_ITU_T is not set + CONFIG_CRC32=y +@@ -1800,6 +1814,8 @@ CONFIG_CRC32=y + CONFIG_LIBCRC32C=y + CONFIG_ZLIB_INFLATE=y + CONFIG_ZLIB_DEFLATE=y ++CONFIG_LZO_COMPRESS=y ++CONFIG_LZO_DECOMPRESS=y + CONFIG_DECOMPRESS_GZIP=y + CONFIG_HAS_IOMEM=y + CONFIG_HAS_IOPORT=y +-- +1.6.4.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/defconfig b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/defconfig new file mode 100644 index 0000000000..78eeb66d59 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/cm-t35/defconfig @@ -0,0 +1,1823 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32 +# Mon Dec 7 10:43:46 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_NONE is not set +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3517EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set +# CONFIG_MACH_OMAP_ZOOM3 is not set +CONFIG_MACH_CM_T35=y +# CONFIG_MACH_IGEP0020 is not set +# CONFIG_MACH_OMAP_3630SDP is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=m +# CONFIG_LIB80211_DEBUG is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_OMAP_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_PREFETCH=y +# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=m +# CONFIG_LIBERTAS_USB is not set +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_SPI is not set +# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_KEYBOARD_TWL4030=m +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=m +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +# CONFIG_TWL4030_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_TWL4030_CODEC is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_OMAP2_VRAM=y +CONFIG_OMAP2_VRFB=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_VRAM_SIZE=4 +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y +# CONFIG_OMAP2_DSS_RFBI is not set +CONFIG_OMAP2_DSS_VENC=y +# CONFIG_OMAP2_DSS_SDI is not set +# CONFIG_OMAP2_DSS_DSI is not set +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC=y +# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set +# CONFIG_PANEL_SHARP_LS037V7DW01 is not set +CONFIG_PANEL_TOPPOLY_TDO35S=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +CONFIG_LCD_TDO24M=y +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=y +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0012-OMAP-DSS2-Add-support-for-LG-Philips-LB035Q02-pane.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0012-OMAP-DSS2-Add-support-for-LG-Philips-LB035Q02-pane.patch new file mode 100644 index 0000000000..a22f3e712f --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0012-OMAP-DSS2-Add-support-for-LG-Philips-LB035Q02-pane.patch @@ -0,0 +1,254 @@ +From e09abf20005e9abf41e44e712bc600d2cb346cb5 Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Thu, 17 Dec 2009 15:05:30 -0800 +Subject: [PATCH 12/16] OMAP: DSS2: Add support for LG Philips LB035Q02 panel + +--- + drivers/video/omap2/displays/Kconfig | 6 + + drivers/video/omap2/displays/Makefile | 1 + + .../omap2/displays/panel-lgphilips-lb035q02.c | 206 ++++++++++++++++++++ + 3 files changed, 213 insertions(+), 0 deletions(-) + create mode 100644 drivers/video/omap2/displays/panel-lgphilips-lb035q02.c + +diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig +index 79d2861..050f29c 100644 +--- a/drivers/video/omap2/displays/Kconfig ++++ b/drivers/video/omap2/displays/Kconfig +@@ -7,6 +7,12 @@ config PANEL_GENERIC + Generic panel driver. + Used for DVI output for Beagle and OMAP3 SDP. + ++config PANEL_LGPHILIPS_LB035Q02 ++ tristate "LG.Philips LB035Q02 LCD Panel" ++ depends on OMAP2_DSS ++ help ++ LCD Panel used on Overo Palo35 ++ + config PANEL_SAMSUNG_LTE430WQ_F0C + tristate "Samsung LTE430WQ-F0C LCD Panel" + depends on OMAP2_DSS +diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile +index d44e765..28f6f9b 100644 +--- a/drivers/video/omap2/displays/Makefile ++++ b/drivers/video/omap2/displays/Makefile +@@ -1,4 +1,5 @@ + obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o ++obj-$(CONFIG_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o + obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o + obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o + +diff --git a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c +new file mode 100644 +index 0000000..22dc865 +--- /dev/null ++++ b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c +@@ -0,0 +1,206 @@ ++/* ++ * LCD panel driver for LG.Philips LB035Q02 ++ * ++ * Author: Steve Sakoman ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++#include ++ ++#include ++ ++static struct spi_device *spidev; ++ ++static struct omap_video_timings lb035q02_timings = { ++ .x_res = 320, ++ .y_res = 240, ++ ++ .pixel_clock = 6500, ++ ++ .hsw = 2, ++ .hfp = 20, ++ .hbp = 68, ++ ++ .vsw = 2, ++ .vfp = 4, ++ .vbp = 18, ++}; ++ ++static int lb035q02_panel_probe(struct omap_dss_device *dssdev) ++{ ++ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | ++ OMAP_DSS_LCD_IHS; ++ dssdev->panel.timings = lb035q02_timings; ++ ++ return 0; ++} ++ ++static void lb035q02_panel_remove(struct omap_dss_device *dssdev) ++{ ++} ++ ++static int lb035q02_write_reg(u8 reg, u16 val) ++{ ++ struct spi_message msg; ++ struct spi_transfer index_xfer = { ++ .len = 3, ++ .cs_change = 1, ++ }; ++ struct spi_transfer value_xfer = { ++ .len = 3, ++ }; ++ u8 buffer[16]; ++ ++ spi_message_init(&msg); ++ ++ /* register index */ ++ buffer[0] = 0x70; ++ buffer[1] = 0x00; ++ buffer[2] = reg & 0x7f; ++ index_xfer.tx_buf = buffer; ++ spi_message_add_tail(&index_xfer, &msg); ++ ++ /* register value */ ++ buffer[4] = 0x72; ++ buffer[5] = val >> 8; ++ buffer[6] = val; ++ value_xfer.tx_buf = buffer + 4; ++ spi_message_add_tail(&value_xfer, &msg); ++ ++ return spi_sync(spidev, &msg); ++} ++ ++static int lb035q02_panel_enable(struct omap_dss_device *dssdev) ++{ ++ int r = 0; ++ ++ pr_info("lgphilips_lb035q02: panel_enable: 0x%08x\n", spidev); ++ /* wait couple of vsyncs until enabling the LCD */ ++ msleep(50); ++ ++ if (dssdev->platform_enable) ++ r = dssdev->platform_enable(dssdev); ++ ++ /* Panel init sequence from page 28 of the spec */ ++ lb035q02_write_reg(0x01, 0x6300); ++ lb035q02_write_reg(0x02, 0x0200); ++ lb035q02_write_reg(0x03, 0x0177); ++ lb035q02_write_reg(0x04, 0x04c7); ++ lb035q02_write_reg(0x05, 0xffc0); ++ lb035q02_write_reg(0x06, 0xe806); ++ lb035q02_write_reg(0x0a, 0x4008); ++ lb035q02_write_reg(0x0b, 0x0000); ++ lb035q02_write_reg(0x0d, 0x0030); ++ lb035q02_write_reg(0x0e, 0x2800); ++ lb035q02_write_reg(0x0f, 0x0000); ++ lb035q02_write_reg(0x16, 0x9f80); ++ lb035q02_write_reg(0x17, 0x0a0f); ++ lb035q02_write_reg(0x1e, 0x00c1); ++ lb035q02_write_reg(0x30, 0x0300); ++ lb035q02_write_reg(0x31, 0x0007); ++ lb035q02_write_reg(0x32, 0x0000); ++ lb035q02_write_reg(0x33, 0x0000); ++ lb035q02_write_reg(0x34, 0x0707); ++ lb035q02_write_reg(0x35, 0x0004); ++ lb035q02_write_reg(0x36, 0x0302); ++ lb035q02_write_reg(0x37, 0x0202); ++ lb035q02_write_reg(0x3a, 0x0a0d); ++ lb035q02_write_reg(0x3b, 0x0806); ++ ++ return r; ++} ++ ++static void lb035q02_panel_disable(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->platform_disable) ++ dssdev->platform_disable(dssdev); ++ ++ /* wait at least 5 vsyncs after disabling the LCD */ ++ ++ msleep(100); ++} ++ ++static int lb035q02_panel_suspend(struct omap_dss_device *dssdev) ++{ ++ pr_info("lgphilips_lb035q02: panel_suspend\n"); ++ lb035q02_panel_disable(dssdev); ++ return 0; ++} ++ ++static int lb035q02_panel_resume(struct omap_dss_device *dssdev) ++{ ++ pr_info("lgphilips_lb035q02: panel_resume\n"); ++ return lb035q02_panel_enable(dssdev); ++} ++ ++static struct omap_dss_driver lb035q02_driver = { ++ .probe = lb035q02_panel_probe, ++ .remove = lb035q02_panel_remove, ++ ++ .enable = lb035q02_panel_enable, ++ .disable = lb035q02_panel_disable, ++ .suspend = lb035q02_panel_suspend, ++ .resume = lb035q02_panel_resume, ++ ++ .driver = { ++ .name = "lgphilips_lb035q02_panel", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __devinit lb035q02_panel_spi_probe(struct spi_device *spi) ++{ ++ spidev = spi; ++ return 0; ++} ++ ++static int __devexit lb035q02_panel_spi_remove(struct spi_device *spi) ++{ ++ return 0; ++} ++ ++static struct spi_driver lb035q02_spi_driver = { ++ .driver = { ++ .name = "lgphilips_lb035q02_panel-spi", ++ .owner = THIS_MODULE, ++ }, ++ .probe = lb035q02_panel_spi_probe, ++ .remove = __devexit_p (lb035q02_panel_spi_remove), ++}; ++ ++static int __init lb035q02_panel_drv_init(void) ++{ ++ int ret; ++ ret = spi_register_driver(&lb035q02_spi_driver); ++ if (ret != 0) ++ pr_err("lgphilips_lb035q02: Unable to register SPI driver: %d\n", ret); ++ ++ ret = omap_dss_register_driver(&lb035q02_driver); ++ if (ret != 0) ++ pr_err("lgphilips_lb035q02: Unable to register panel driver: %d\n", ret); ++ ++ return ret; ++} ++ ++static void __exit lb035q02_panel_drv_exit(void) ++{ ++ spi_unregister_driver(&lb035q02_spi_driver); ++ omap_dss_unregister_driver(&lb035q02_driver); ++} ++ ++module_init(lb035q02_panel_drv_init); ++module_exit(lb035q02_panel_drv_exit); ++MODULE_LICENSE("GPL"); +-- +1.6.2.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0014-OMAP-DSS-Add-DSS2-support-for-Overo.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0014-OMAP-DSS-Add-DSS2-support-for-Overo.patch new file mode 100644 index 0000000000..c673a09a76 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0014-OMAP-DSS-Add-DSS2-support-for-Overo.patch @@ -0,0 +1,343 @@ +From 6b135653505a2a5da42c92cfa31c3ab22e2b130f Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Fri, 18 Dec 2009 06:39:24 -0800 +Subject: [PATCH 14/16] OMAP: DSS: Add DSS2 support for Overo + +--- + arch/arm/mach-omap2/board-overo.c | 233 +++++++++++++++++++++++++++++++----- + 1 files changed, 200 insertions(+), 33 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c +index d0394d9..b90b140 100644 +--- a/arch/arm/mach-omap2/board-overo.c ++++ b/arch/arm/mach-omap2/board-overo.c +@@ -28,6 +28,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -40,10 +41,12 @@ + + #include + #include ++#include + #include + #include + #include + #include ++#include + #include + #include + +@@ -69,8 +72,6 @@ + #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + +-#include +-#include + #include + + static struct omap2_mcspi_device_config ads7846_mcspi_config = { +@@ -95,18 +96,6 @@ static struct ads7846_platform_data ads7846_config = { + .keep_vref_on = 1, + }; + +-static struct spi_board_info overo_spi_board_info[] __initdata = { +- { +- .modalias = "ads7846", +- .bus_num = 1, +- .chip_select = 0, +- .max_speed_hz = 1500000, +- .controller_data = &ads7846_mcspi_config, +- .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), +- .platform_data = &ads7846_config, +- } +-}; +- + static void __init overo_ads7846_init(void) + { + if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) && +@@ -116,9 +105,6 @@ static void __init overo_ads7846_init(void) + printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n"); + return; + } +- +- spi_register_board_info(overo_spi_board_info, +- ARRAY_SIZE(overo_spi_board_info)); + } + + #else +@@ -234,6 +220,137 @@ static inline void __init overo_init_smsc911x(void) + static inline void __init overo_init_smsc911x(void) { return; } + #endif + ++/* DSS */ ++static int lcd_enabled; ++static int dvi_enabled; ++ ++#define OVERO_GPIO_LCD_EN 144 ++#define OVERO_GPIO_LCD_BL 145 ++ ++static void __init overo_display_init(void) ++{ ++ if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) && ++ (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0)) ++ gpio_export(OVERO_GPIO_LCD_EN, 0); ++ else ++ printk(KERN_ERR "could not obtain gpio for " ++ "OVERO_GPIO_LCD_EN\n"); ++ ++ if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) && ++ (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0)) ++ gpio_export(OVERO_GPIO_LCD_BL, 0); ++ else ++ printk(KERN_ERR "could not obtain gpio for " ++ "OVERO_GPIO_LCD_BL\n"); ++} ++ ++static int overo_panel_enable_dvi(struct omap_dss_device *dssdev) ++{ ++ if (lcd_enabled) { ++ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); ++ return -EINVAL; ++ } ++ dvi_enabled = 1; ++ ++ return 0; ++} ++ ++static void overo_panel_disable_dvi(struct omap_dss_device *dssdev) ++{ ++ dvi_enabled = 0; ++} ++ ++static struct omap_dss_device overo_dvi_device = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "dvi", ++ .driver_name = "generic_panel", ++ .phy.dpi.data_lines = 24, ++ .platform_enable = overo_panel_enable_dvi, ++ .platform_disable = overo_panel_disable_dvi, ++}; ++ ++static int overo_panel_enable_lcd(struct omap_dss_device *dssdev) ++{ ++ if (dvi_enabled) { ++ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); ++ return -EINVAL; ++ } ++ ++ gpio_set_value(OVERO_GPIO_LCD_EN, 1); ++ gpio_set_value(OVERO_GPIO_LCD_BL, 1); ++ lcd_enabled = 1; ++ return 0; ++} ++ ++static void overo_panel_disable_lcd(struct omap_dss_device *dssdev) ++{ ++ gpio_set_value(OVERO_GPIO_LCD_EN, 0); ++ gpio_set_value(OVERO_GPIO_LCD_BL, 0); ++ lcd_enabled = 0; ++} ++ ++#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ ++ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) ++static struct omap_dss_device overo_lcd35_device = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "lcd35", ++ .driver_name = "lgphilips_lb035q02_panel", ++ .phy.dpi.data_lines = 24, ++ .panel.recommended_bpp = 16, ++ .platform_enable = overo_panel_enable_lcd, ++ .platform_disable = overo_panel_disable_lcd, ++}; ++#endif ++ ++#if defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) || \ ++ defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C_MODULE) ++static struct omap_dss_device overo_lcd43_device = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "lcd43", ++ .driver_name = "samsung_lte_panel", ++ .phy.dpi.data_lines = 24, ++ .panel.recommended_bpp = 16, ++ .platform_enable = overo_panel_enable_lcd, ++ .platform_disable = overo_panel_disable_lcd, ++}; ++#endif ++ ++static struct omap_dss_device *overo_dss_devices[] = { ++ &overo_dvi_device, ++#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ ++ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) ++ &overo_lcd35_device, ++#endif ++#if defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) || \ ++ defined(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C_MODULE) ++ &overo_lcd43_device, ++#endif ++}; ++ ++static struct omap_dss_board_info overo_dss_data = { ++ .num_devices = ARRAY_SIZE(overo_dss_devices), ++ .devices = overo_dss_devices, ++ .default_device = &overo_dvi_device, ++}; ++ ++static struct platform_device overo_dss_device = { ++ .name = "omapdss", ++ .id = -1, ++ .dev = { ++ .platform_data = &overo_dss_data, ++ }, ++}; ++ ++static struct regulator_consumer_supply overo_vdda_dac_supply = { ++ .supply = "vdda_dac", ++ .dev = &overo_dss_device.dev, ++}; ++ ++static struct regulator_consumer_supply overo_vdds_dsi_supply = { ++ .supply = "vdds_dsi", ++ .dev = &overo_dss_device.dev, ++}; ++ + static struct mtd_partition overo_nand_partitions[] = { + { + .name = "xloader", +@@ -379,6 +496,37 @@ static struct regulator_init_data overo_vmmc1 = { + .consumer_supplies = &overo_vmmc1_supply, + }; + ++/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ ++static struct regulator_init_data overo_vdac = { ++ .constraints = { ++ .min_uV = 1800000, ++ .max_uV = 1800000, ++ .valid_modes_mask = REGULATOR_MODE_NORMAL ++ | REGULATOR_MODE_STANDBY, ++ .valid_ops_mask = REGULATOR_CHANGE_MODE ++ | REGULATOR_CHANGE_STATUS, ++ }, ++ .num_consumer_supplies = 1, ++ .consumer_supplies = &overo_vdda_dac_supply, ++}; ++ ++/* VPLL2 for digital video outputs */ ++static struct regulator_init_data overo_vpll2 = { ++ .constraints = { ++ .name = "VDVI", ++ .min_uV = 1800000, ++ .max_uV = 1800000, ++ .valid_modes_mask = REGULATOR_MODE_NORMAL ++ | REGULATOR_MODE_STANDBY, ++ .valid_ops_mask = REGULATOR_CHANGE_MODE ++ | REGULATOR_CHANGE_STATUS, ++ }, ++ .num_consumer_supplies = 1, ++ .consumer_supplies = &overo_vdds_dsi_supply, ++}; ++ ++/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */ ++ + static struct twl4030_codec_audio_data overo_audio_data = { + .audio_mclk = 26000000, + }; +@@ -388,8 +536,6 @@ static struct twl4030_codec_data overo_codec_data = { + .audio = &overo_audio_data, + }; + +-/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */ +- + static struct twl4030_madc_platform_data overo_madc_data = { + .irq_line = 1, + }; +@@ -402,6 +548,8 @@ static struct twl4030_platform_data overo_twldata = { + .usb = &overo_usb_data, + .codec = &overo_codec_data, + .vmmc1 = &overo_vmmc1, ++ .vdac = &overo_vdac, ++ .vpll2 = &overo_vpll2, + }; + + static struct i2c_board_info __initdata overo_i2c_boardinfo[] = { +@@ -422,23 +570,41 @@ static int __init overo_i2c_init(void) + return 0; + } + +-static struct platform_device overo_lcd_device = { +- .name = "overo_lcd", +- .id = -1, +-}; +- +-static struct omap_lcd_config overo_lcd_config __initdata = { +- .ctrl_name = "internal", ++static struct spi_board_info overo_spi_board_info[] __initdata = { ++#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ ++ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) ++ { ++ .modalias = "ads7846", ++ .bus_num = 1, ++ .chip_select = 0, ++ .max_speed_hz = 1500000, ++ .controller_data = &ads7846_mcspi_config, ++ .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), ++ .platform_data = &ads7846_config, ++ }, ++#endif ++#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ ++ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) ++ { ++ .modalias = "lgphilips_lb035q02_panel-spi", ++ .bus_num = 1, ++ .chip_select = 1, ++ .max_speed_hz = 500000, ++ .mode = SPI_MODE_3, ++ }, ++#endif + }; + +-static struct omap_board_config_kernel overo_config[] __initdata = { +- { OMAP_TAG_LCD, &overo_lcd_config }, +-}; ++static int __init overo_spi_init(void) ++{ ++ overo_ads7846_init(); ++ spi_register_board_info(overo_spi_board_info, ++ ARRAY_SIZE(overo_spi_board_info)); ++ return 0; ++} + + static void __init overo_init_irq(void) + { +- omap_board_config = overo_config; +- omap_board_config_size = ARRAY_SIZE(overo_config); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); + omap_init_irq(); +@@ -446,7 +612,7 @@ static void __init overo_init_irq(void) + } + + static struct platform_device *overo_devices[] __initdata = { +- &overo_lcd_device, ++ &overo_dss_device, + }; + + static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +@@ -469,8 +635,9 @@ static void __init overo_init(void) + overo_flash_init(); + usb_musb_init(); + usb_ehci_init(&ehci_pdata); +- overo_ads7846_init(); ++ overo_spi_init(); + overo_init_smsc911x(); ++ overo_display_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); +-- +1.6.2.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0015-OMAP-DSS-Add-DSS2-support-for-Beagle.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0015-OMAP-DSS-Add-DSS2-support-for-Beagle.patch new file mode 100644 index 0000000000..656ba85318 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0015-OMAP-DSS-Add-DSS2-support-for-Beagle.patch @@ -0,0 +1,186 @@ +--- /tmp/board-omap3beagle.c 2009-12-22 10:47:35.000000000 +0100 ++++ git/arch/arm/mach-omap2/board-omap3beagle.c 2009-12-22 10:59:53.000000000 +0100 +@@ -40,6 +40,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -149,6 +150,105 @@ + .resource = &omap3beagle_nand_resource, + }; + ++/* DSS */ ++ ++static int beagle_enable_dvi(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->reset_gpio != -1) ++ gpio_set_value(dssdev->reset_gpio, 1); ++ ++ return 0; ++} ++ ++static void beagle_disable_dvi(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->reset_gpio != -1) ++ gpio_set_value(dssdev->reset_gpio, 0); ++} ++ ++static struct omap_dss_device beagle_dvi_device = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "dvi", ++ .driver_name = "generic_panel", ++ .phy.dpi.data_lines = 24, ++ .reset_gpio = 170, ++ .platform_enable = beagle_enable_dvi, ++ .platform_disable = beagle_disable_dvi, ++}; ++ ++static int beagle_panel_enable_tv(struct omap_dss_device *dssdev) ++{ ++#define ENABLE_VDAC_DEDICATED 0x03 ++#define ENABLE_VDAC_DEV_GRP 0x20 ++ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEDICATED, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); ++ ++ return 0; ++} ++ ++static void beagle_panel_disable_tv(struct omap_dss_device *dssdev) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEV_GRP); ++} ++ ++static struct omap_dss_device beagle_tv_device = { ++ .name = "tv", ++ .driver_name = "venc", ++ .type = OMAP_DISPLAY_TYPE_VENC, ++ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, ++ .platform_enable = beagle_panel_enable_tv, ++ .platform_disable = beagle_panel_disable_tv, ++}; ++ ++static struct omap_dss_device *beagle_dss_devices[] = { ++ &beagle_dvi_device, ++ &beagle_tv_device, ++}; ++ ++static struct omap_dss_board_info beagle_dss_data = { ++ .num_devices = ARRAY_SIZE(beagle_dss_devices), ++ .devices = beagle_dss_devices, ++ .default_device = &beagle_dvi_device, ++}; ++ ++static struct platform_device beagle_dss_device = { ++ .name = "omapdss", ++ .id = -1, ++ .dev = { ++ .platform_data = &beagle_dss_data, ++ }, ++}; ++ ++static struct regulator_consumer_supply beagle_vdac_supply = { ++ .supply = "vdda_dac", ++ .dev = &beagle_dss_device.dev, ++}; ++ ++static struct regulator_consumer_supply beagle_vdvi_supply = { ++ .supply = "vdds_dsi", ++ .dev = &beagle_dss_device.dev, ++}; ++ ++static void __init beagle_display_init(void) ++{ ++ int r; ++ ++ r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset"); ++ if (r < 0) { ++ printk(KERN_ERR "Unable to get DVI reset GPIO\n"); ++ return; ++ } ++ ++ gpio_direction_output(beagle_dvi_device.reset_gpio, 0); ++} ++ + #include "sdram-micron-mt46h32m32lf-6.h" + + static struct twl4030_hsmmc_info mmc[] = { +@@ -168,15 +268,6 @@ + {} /* Terminator */ + }; + +-static struct platform_device omap3_beagle_lcd_device = { +- .name = "omap3beagle_lcd", +- .id = -1, +-}; +- +-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { +- .ctrl_name = "internal", +-}; +- + static struct regulator_consumer_supply beagle_vmmc1_supply = { + .supply = "vmmc", + }; +@@ -232,16 +323,6 @@ + .setup = beagle_twl_gpio_setup, + }; + +-static struct regulator_consumer_supply beagle_vdac_supply = { +- .supply = "vdac", +- .dev = &omap3_beagle_lcd_device.dev, +-}; +- +-static struct regulator_consumer_supply beagle_vdvi_supply = { +- .supply = "vdvi", +- .dev = &omap3_beagle_lcd_device.dev, +-}; +- + /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ + static struct regulator_init_data beagle_vmmc1 = { + .constraints = { +@@ -419,14 +500,8 @@ + }, + }; + +-static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { +- { OMAP_TAG_LCD, &omap3_beagle_lcd_config }, +-}; +- + static void __init omap3_beagle_init_irq(void) + { +- omap_board_config = omap3_beagle_config; +- omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); + omap_init_irq(); +@@ -437,9 +512,9 @@ + } + + static struct platform_device *omap3_beagle_devices[] __initdata = { +- &omap3_beagle_lcd_device, + &leds_gpio, + &keys_gpio, ++ &beagle_dss_device, + }; + + static void __init omap3beagle_flash_init(void) +@@ -522,8 +597,9 @@ + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); +-} + ++ beagle_display_init(); ++} + static void __init omap3_beagle_map_io(void) + { + omap2_set_globals_343x(); diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0016-video-add-timings-for-hd720.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0016-video-add-timings-for-hd720.patch new file mode 100644 index 0000000000..e5f7a4e072 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/dss2/0016-video-add-timings-for-hd720.patch @@ -0,0 +1,27 @@ +From 77c7ed5e802e9bb244cd00fa60c95de1e28c29be Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Sat, 19 Dec 2009 06:52:43 -0800 +Subject: [PATCH 16/16] video: add timings for hd720 + +--- + drivers/video/modedb.c | 4 ++++ + 1 files changed, 4 insertions(+), 0 deletions(-) + +diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c +index 34e4e79..9d9114d 100644 +--- a/drivers/video/modedb.c ++++ b/drivers/video/modedb.c +@@ -100,6 +100,10 @@ static const struct fb_videomode modedb[] = { + NULL, 70, 1024, 768, 13333, 144, 24, 29, 3, 136, 6, + 0, FB_VMODE_NONINTERLACED + }, { ++ /* 1280x720 @ 60 Hz, 45 kHz hsync, CEA 681-E Format 4 */ ++ "hd720", 60, 1280, 720, 13468, 220, 110, 20, 5, 40, 5, ++ 0, FB_VMODE_NONINTERLACED ++ }, { + /* 1280x1024 @ 87 Hz interlaced, 51 kHz hsync */ + NULL, 87, 1280, 1024, 12500, 56, 16, 128, 1, 216, 12, + 0, FB_VMODE_INTERLACED +-- +1.6.2.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/dss2/beagle-dss2-support.diff b/recipes/kexecboot/linux-kexecboot-2.6.32/dss2/beagle-dss2-support.diff new file mode 100755 index 0000000000..15d7971fa8 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/dss2/beagle-dss2-support.diff @@ -0,0 +1,308 @@ +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -30,6 +30,7 @@ + + #include + #include ++#include + + #include + #include +@@ -44,6 +45,7 @@ + #include + #include + #include ++#include + + #include "mmc-twl4030.h" + +@@ -115,15 +117,6 @@ + .gpio_wp = 29, + }, + {} /* Terminator */ +-}; +- +-static struct platform_device omap3_beagle_lcd_device = { +- .name = "omap3beagle_lcd", +- .id = -1, +-}; +- +-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { +- .ctrl_name = "internal", + }; + + static struct regulator_consumer_supply beagle_vmmc1_supply = { +@@ -179,16 +172,6 @@ + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) + | BIT(15) | BIT(16) | BIT(17), + .setup = beagle_twl_gpio_setup, +-}; +- +-static struct regulator_consumer_supply beagle_vdac_supply = { +- .supply = "vdac", +- .dev = &omap3_beagle_lcd_device.dev, +-}; +- +-static struct regulator_consumer_supply beagle_vdvi_supply = { +- .supply = "vdvi", +- .dev = &omap3_beagle_lcd_device.dev, + }; + + /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +@@ -221,35 +204,6 @@ + .consumer_supplies = &beagle_vsim_supply, + }; + +-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +-static struct regulator_init_data beagle_vdac = { +- .constraints = { +- .min_uV = 1800000, +- .max_uV = 1800000, +- .valid_modes_mask = REGULATOR_MODE_NORMAL +- | REGULATOR_MODE_STANDBY, +- .valid_ops_mask = REGULATOR_CHANGE_MODE +- | REGULATOR_CHANGE_STATUS, +- }, +- .num_consumer_supplies = 1, +- .consumer_supplies = &beagle_vdac_supply, +-}; +- +-/* VPLL2 for digital video outputs */ +-static struct regulator_init_data beagle_vpll2 = { +- .constraints = { +- .name = "VDVI", +- .min_uV = 1800000, +- .max_uV = 1800000, +- .valid_modes_mask = REGULATOR_MODE_NORMAL +- | REGULATOR_MODE_STANDBY, +- .valid_ops_mask = REGULATOR_CHANGE_MODE +- | REGULATOR_CHANGE_STATUS, +- }, +- .num_consumer_supplies = 1, +- .consumer_supplies = &beagle_vdvi_supply, +-}; +- + static struct twl4030_usb_data beagle_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, + }; +@@ -262,39 +216,6 @@ + .audio_mclk = 26000000, + .audio = &beagle_audio_data, + }; +- +-static struct twl4030_platform_data beagle_twldata = { +- .irq_base = TWL4030_IRQ_BASE, +- .irq_end = TWL4030_IRQ_END, +- +- /* platform_data for children goes here */ +- .usb = &beagle_usb_data, +- .gpio = &beagle_gpio_data, +- .codec = &beagle_codec_data, +- .vmmc1 = &beagle_vmmc1, +- .vsim = &beagle_vsim, +- .vdac = &beagle_vdac, +- .vpll2 = &beagle_vpll2, +-}; +- +-static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { +- { +- I2C_BOARD_INFO("twl4030", 0x48), +- .flags = I2C_CLIENT_WAKE, +- .irq = INT_34XX_SYS_NIRQ, +- .platform_data = &beagle_twldata, +- }, +-}; +- +-static int __init omap3_beagle_i2c_init(void) +-{ +- omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo, +- ARRAY_SIZE(beagle_i2c_boardinfo)); +- /* Bus 3 is attached to the DVI port where devices like the pico DLP +- * projector don't work reliably with 400kHz */ +- omap_register_i2c_bus(3, 100, NULL, 0); +- return 0; +-} + + static struct gpio_led gpio_leds[] = { + { +@@ -349,14 +270,156 @@ + }, + }; + +-static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { +- { OMAP_TAG_LCD, &omap3_beagle_lcd_config }, +-}; ++/* DSS */ ++ ++static int beagle_enable_dvi(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->reset_gpio != -1) ++ gpio_set_value(dssdev->reset_gpio, 1); ++ ++ return 0; ++} ++ ++static void beagle_disable_dvi(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->reset_gpio != -1) ++ gpio_set_value(dssdev->reset_gpio, 0); ++} ++ ++static struct omap_dss_device beagle_dvi_device = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "dvi", ++ .driver_name = "generic_panel", ++ .phy.dpi.data_lines = 24, ++ .reset_gpio = 170, ++ .platform_enable = beagle_enable_dvi, ++ .platform_disable = beagle_disable_dvi, ++}; ++ ++static int beagle_panel_enable_tv(struct omap_dss_device *dssdev) ++{ ++ return 0; ++} ++ ++static void beagle_panel_disable_tv(struct omap_dss_device *dssdev) ++{ ++} ++ ++static struct omap_dss_device beagle_tv_device = { ++ .name = "tv", ++ .driver_name = "venc", ++ .type = OMAP_DISPLAY_TYPE_VENC, ++ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, ++ .platform_enable = beagle_panel_enable_tv, ++ .platform_disable = beagle_panel_disable_tv, ++}; ++ ++static struct omap_dss_device *beagle_dss_devices[] = { ++ &beagle_dvi_device, ++ &beagle_tv_device, ++}; ++ ++static struct omap_dss_board_info beagle_dss_data = { ++ .num_devices = ARRAY_SIZE(beagle_dss_devices), ++ .devices = beagle_dss_devices, ++ .default_device = &beagle_dvi_device, ++}; ++ ++static struct platform_device beagle_dss_device = { ++ .name = "omapdss", ++ .id = -1, ++ .dev = { ++ .platform_data = &beagle_dss_data, ++ }, ++}; ++ ++static struct regulator_consumer_supply beagle_vdda_dac_supply = { ++ .supply = "vdda_dac", ++ .dev = &beagle_dss_device.dev, ++}; ++ ++static struct regulator_consumer_supply beagle_vdds_dsi_supply = { ++ .supply = "vdds_dsi", ++ .dev = &beagle_dss_device.dev, ++}; ++ ++static void __init beagle_display_init(void) ++{ ++ int r; ++ ++ r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset"); ++ if (r < 0) { ++ printk(KERN_ERR "Unable to get DVI reset GPIO\n"); ++ return; ++ } ++ ++ gpio_direction_output(beagle_dvi_device.reset_gpio, 0); ++} ++ ++/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ ++static struct regulator_init_data beagle_vdac = { ++ .constraints = { ++ .min_uV = 1800000, ++ .max_uV = 1800000, ++ .apply_uV = true, ++ .valid_modes_mask = REGULATOR_MODE_NORMAL ++ | REGULATOR_MODE_STANDBY, ++ .valid_ops_mask = REGULATOR_CHANGE_MODE ++ | REGULATOR_CHANGE_STATUS, ++ }, ++ .num_consumer_supplies = 1, ++ .consumer_supplies = &beagle_vdda_dac_supply, ++}; ++ ++/* VPLL2 for digital video outputs */ ++static struct regulator_init_data beagle_vpll2 = { ++ .constraints = { ++ .name = "VDVI", ++ .min_uV = 1800000, ++ .max_uV = 1800000, .valid_modes_mask = REGULATOR_MODE_NORMAL ++ | REGULATOR_MODE_STANDBY, ++ .valid_ops_mask = REGULATOR_CHANGE_MODE ++ | REGULATOR_CHANGE_STATUS, ++ }, ++ .num_consumer_supplies = 1, ++ .consumer_supplies = &beagle_vdds_dsi_supply, ++}; ++ ++static struct twl4030_platform_data beagle_twldata = { ++ .irq_base = TWL4030_IRQ_BASE, ++ .irq_end = TWL4030_IRQ_END, ++ ++ /* platform_data for children goes here */ ++ .usb = &beagle_usb_data, ++ .gpio = &beagle_gpio_data, ++ .vmmc1 = &beagle_vmmc1, ++ .vsim = &beagle_vsim, ++ .vdac = &beagle_vdac, ++ .vpll2 = &beagle_vpll2, ++}; ++ ++static struct i2c_board_info __initdata beagle_i2c1_boardinfo[] = { ++ { ++ I2C_BOARD_INFO("twl4030", 0x48), ++ .flags = I2C_CLIENT_WAKE, ++ .irq = INT_34XX_SYS_NIRQ, ++ .platform_data = &beagle_twldata, ++ }, ++}; ++ ++static int __init omap3_beagle_i2c_init(void) ++{ ++ omap_register_i2c_bus(1, 2600, beagle_i2c1_boardinfo, ++ ARRAY_SIZE(beagle_i2c1_boardinfo)); ++ /* Bus 3 is attached to the DVI port where devices like the pico DLP ++ * projector don't work reliably with 400kHz */ ++ omap_register_i2c_bus(3, 100, NULL, 0); ++ return 0; ++} ++ + + static void __init omap3_beagle_init_irq(void) + { +- omap_board_config = omap3_beagle_config; +- omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); + omap_init_irq(); +@@ -367,7 +430,7 @@ + } + + static struct platform_device *omap3_beagle_devices[] __initdata = { +- &omap3_beagle_lcd_device, ++ &beagle_dss_device, + &leds_gpio, + &keys_gpio, + }; +@@ -437,6 +500,8 @@ + usb_musb_init(); + usb_ehci_init(&ehci_pdata); + omap3beagle_flash_init(); ++ ++ beagle_display_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/madc/0009-drivers-mfd-add-twl4030-madc-driver.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/madc/0009-drivers-mfd-add-twl4030-madc-driver.patch new file mode 100644 index 0000000000..00d7b9b72d --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/madc/0009-drivers-mfd-add-twl4030-madc-driver.patch @@ -0,0 +1,601 @@ +From acfc350552bbe07f5dd8bf2e4f1db67af64975a8 Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Thu, 17 Dec 2009 14:19:34 -0800 +Subject: [PATCH 09/16] drivers: mfd: add twl4030 madc driver + +--- + drivers/mfd/Kconfig | 21 ++ + drivers/mfd/Makefile | 1 + + drivers/mfd/twl4030-madc.c | 536 ++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 558 insertions(+), 0 deletions(-) + create mode 100644 drivers/mfd/twl4030-madc.c + +diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig +index 08f2d07..008ced0 100644 +--- a/drivers/mfd/Kconfig ++++ b/drivers/mfd/Kconfig +@@ -127,6 +127,27 @@ config TWL4030_CODEC + select MFD_CORE + default n + ++config TWL4030_MADC ++ tristate "TWL4030 MADC Driver" ++ depends on TWL4030_CORE ++ help ++ The TWL4030 Monitoring ADC driver enables the host ++ processor to monitor analog signals using analog-to-digital ++ conversions on the input source. TWL4030 MADC provides the ++ following features: ++ - Single 10-bit ADC with successive approximation register (SAR) conversion; ++ - Analog multiplexer for 16 inputs; ++ - Seven (of the 16) inputs are freely available; ++ - Battery voltage monitoring; ++ - Concurrent conversion request management; ++ - Interrupt signal to Primary Interrupt Handler; ++ - Averaging feature; ++ - Selective enable/disable of the averaging feature. ++ ++ Say 'y' here to statically link this module into the kernel or 'm' ++ to build it as a dinamically loadable module. The module will be ++ called twl4030-madc.ko ++ + config MFD_TMIO + bool + default n +diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile +index af0fc90..3992aee 100644 +--- a/drivers/mfd/Makefile ++++ b/drivers/mfd/Makefile +@@ -27,6 +27,7 @@ obj-$(CONFIG_MENELAUS) += menelaus.o + obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o + obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o + obj-$(CONFIG_TWL4030_CODEC) += twl4030-codec.o ++obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o + + obj-$(CONFIG_MFD_MC13783) += mc13783-core.o + +diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c +new file mode 100644 +index 0000000..7d83ab8 +--- /dev/null ++++ b/drivers/mfd/twl4030-madc.c +@@ -0,0 +1,536 @@ ++/* ++ * TWL4030 MADC module driver ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Mikko Ylinen ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA ++ * 02110-1301 USA ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define TWL4030_MADC_PFX "twl4030-madc: " ++ ++struct twl4030_madc_data { ++ struct device *dev; ++ struct mutex lock; ++ struct work_struct ws; ++ struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS]; ++ int imr; ++ int isr; ++}; ++ ++static struct twl4030_madc_data *the_madc; ++ ++static ++const struct twl4030_madc_conversion_method twl4030_conversion_methods[] = { ++ [TWL4030_MADC_RT] = { ++ .sel = TWL4030_MADC_RTSELECT_LSB, ++ .avg = TWL4030_MADC_RTAVERAGE_LSB, ++ .rbase = TWL4030_MADC_RTCH0_LSB, ++ }, ++ [TWL4030_MADC_SW1] = { ++ .sel = TWL4030_MADC_SW1SELECT_LSB, ++ .avg = TWL4030_MADC_SW1AVERAGE_LSB, ++ .rbase = TWL4030_MADC_GPCH0_LSB, ++ .ctrl = TWL4030_MADC_CTRL_SW1, ++ }, ++ [TWL4030_MADC_SW2] = { ++ .sel = TWL4030_MADC_SW2SELECT_LSB, ++ .avg = TWL4030_MADC_SW2AVERAGE_LSB, ++ .rbase = TWL4030_MADC_GPCH0_LSB, ++ .ctrl = TWL4030_MADC_CTRL_SW2, ++ }, ++}; ++ ++static int twl4030_madc_read(struct twl4030_madc_data *madc, u8 reg) ++{ ++ int ret; ++ u8 val; ++ ++ ret = twl4030_i2c_read_u8(TWL4030_MODULE_MADC, &val, reg); ++ if (ret) { ++ dev_dbg(madc->dev, "unable to read register 0x%X\n", reg); ++ return ret; ++ } ++ ++ return val; ++} ++ ++static void twl4030_madc_write(struct twl4030_madc_data *madc, u8 reg, u8 val) ++{ ++ int ret; ++ ++ ret = twl4030_i2c_write_u8(TWL4030_MODULE_MADC, val, reg); ++ if (ret) ++ dev_err(madc->dev, "unable to write register 0x%X\n", reg); ++} ++ ++static int twl4030_madc_channel_raw_read(struct twl4030_madc_data *madc, u8 reg) ++{ ++ u8 msb, lsb; ++ ++ /* For each ADC channel, we have MSB and LSB register pair. MSB address ++ * is always LSB address+1. reg parameter is the addr of LSB register */ ++ msb = twl4030_madc_read(madc, reg + 1); ++ lsb = twl4030_madc_read(madc, reg); ++ ++ return (int)(((msb << 8) | lsb) >> 6); ++} ++ ++static int twl4030_madc_read_channels(struct twl4030_madc_data *madc, ++ u8 reg_base, u16 channels, int *buf) ++{ ++ int count = 0; ++ u8 reg, i; ++ ++ if (unlikely(!buf)) ++ return 0; ++ ++ for (i = 0; i < TWL4030_MADC_MAX_CHANNELS; i++) { ++ if (channels & (1<imr); ++ val &= ~(1 << id); ++ twl4030_madc_write(madc, madc->imr, val); ++} ++ ++static void twl4030_madc_disable_irq(struct twl4030_madc_data *madc, int id) ++{ ++ u8 val; ++ ++ val = twl4030_madc_read(madc, madc->imr); ++ val |= (1 << id); ++ twl4030_madc_write(madc, madc->imr, val); ++} ++ ++static irqreturn_t twl4030_madc_irq_handler(int irq, void *_madc) ++{ ++ struct twl4030_madc_data *madc = _madc; ++ u8 isr_val, imr_val; ++ int i; ++ ++#ifdef CONFIG_LOCKDEP ++ /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which ++ * we don't want and can't tolerate. Although it might be ++ * friendlier not to borrow this thread context... ++ */ ++ local_irq_enable(); ++#endif ++ ++ /* Use COR to ack interrupts since we have no shared IRQs in ISRx */ ++ isr_val = twl4030_madc_read(madc, madc->isr); ++ imr_val = twl4030_madc_read(madc, madc->imr); ++ ++ isr_val &= ~imr_val; ++ ++ for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) { ++ ++ if (!(isr_val & (1<requests[i].result_pending = 1; ++ } ++ ++ schedule_work(&madc->ws); ++ ++ return IRQ_HANDLED; ++} ++ ++static void twl4030_madc_work(struct work_struct *ws) ++{ ++ const struct twl4030_madc_conversion_method *method; ++ struct twl4030_madc_data *madc; ++ struct twl4030_madc_request *r; ++ int len, i; ++ ++ madc = container_of(ws, struct twl4030_madc_data, ws); ++ mutex_lock(&madc->lock); ++ ++ for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) { ++ ++ r = &madc->requests[i]; ++ ++ /* No pending results for this method, move to next one */ ++ if (!r->result_pending) ++ continue; ++ ++ method = &twl4030_conversion_methods[r->method]; ++ ++ /* Read results */ ++ len = twl4030_madc_read_channels(madc, method->rbase, ++ r->channels, r->rbuf); ++ ++ /* Return results to caller */ ++ if (r->func_cb != NULL) { ++ r->func_cb(len, r->channels, r->rbuf); ++ r->func_cb = NULL; ++ } ++ ++ /* Free request */ ++ r->result_pending = 0; ++ r->active = 0; ++ } ++ ++ mutex_unlock(&madc->lock); ++} ++ ++static int twl4030_madc_set_irq(struct twl4030_madc_data *madc, ++ struct twl4030_madc_request *req) ++{ ++ struct twl4030_madc_request *p; ++ ++ p = &madc->requests[req->method]; ++ ++ memcpy(p, req, sizeof *req); ++ ++ twl4030_madc_enable_irq(madc, req->method); ++ ++ return 0; ++} ++ ++static inline void twl4030_madc_start_conversion(struct twl4030_madc_data *madc, ++ int conv_method) ++{ ++ const struct twl4030_madc_conversion_method *method; ++ ++ method = &twl4030_conversion_methods[conv_method]; ++ ++ switch (conv_method) { ++ case TWL4030_MADC_SW1: ++ case TWL4030_MADC_SW2: ++ twl4030_madc_write(madc, method->ctrl, TWL4030_MADC_SW_START); ++ break; ++ case TWL4030_MADC_RT: ++ default: ++ break; ++ } ++} ++ ++static int twl4030_madc_wait_conversion_ready( ++ struct twl4030_madc_data *madc, ++ unsigned int timeout_ms, u8 status_reg) ++{ ++ unsigned long timeout; ++ ++ timeout = jiffies + msecs_to_jiffies(timeout_ms); ++ do { ++ u8 reg; ++ ++ reg = twl4030_madc_read(madc, status_reg); ++ if (!(reg & TWL4030_MADC_BUSY) && (reg & TWL4030_MADC_EOC_SW)) ++ return 0; ++ } while (!time_after(jiffies, timeout)); ++ ++ return -EAGAIN; ++} ++ ++int twl4030_madc_conversion(struct twl4030_madc_request *req) ++{ ++ const struct twl4030_madc_conversion_method *method; ++ u8 ch_msb, ch_lsb; ++ int ret; ++ ++ if (unlikely(!req)) ++ return -EINVAL; ++ ++ mutex_lock(&the_madc->lock); ++ ++ /* Do we have a conversion request ongoing */ ++ if (the_madc->requests[req->method].active) { ++ ret = -EBUSY; ++ goto out; ++ } ++ ++ ch_msb = (req->channels >> 8) & 0xff; ++ ch_lsb = req->channels & 0xff; ++ ++ method = &twl4030_conversion_methods[req->method]; ++ ++ /* Select channels to be converted */ ++ twl4030_madc_write(the_madc, method->sel + 1, ch_msb); ++ twl4030_madc_write(the_madc, method->sel, ch_lsb); ++ ++ /* Select averaging for all channels if do_avg is set */ ++ if (req->do_avg) { ++ twl4030_madc_write(the_madc, method->avg + 1, ch_msb); ++ twl4030_madc_write(the_madc, method->avg, ch_lsb); ++ } ++ ++ if ((req->type == TWL4030_MADC_IRQ_ONESHOT) && (req->func_cb != NULL)) { ++ twl4030_madc_set_irq(the_madc, req); ++ twl4030_madc_start_conversion(the_madc, req->method); ++ the_madc->requests[req->method].active = 1; ++ ret = 0; ++ goto out; ++ } ++ ++ /* With RT method we should not be here anymore */ ++ if (req->method == TWL4030_MADC_RT) { ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ twl4030_madc_start_conversion(the_madc, req->method); ++ the_madc->requests[req->method].active = 1; ++ ++ /* Wait until conversion is ready (ctrl register returns EOC) */ ++ ret = twl4030_madc_wait_conversion_ready(the_madc, 5, method->ctrl); ++ if (ret) { ++ dev_dbg(the_madc->dev, "conversion timeout!\n"); ++ the_madc->requests[req->method].active = 0; ++ goto out; ++ } ++ ++ ret = twl4030_madc_read_channels(the_madc, method->rbase, req->channels, ++ req->rbuf); ++ ++ the_madc->requests[req->method].active = 0; ++ ++out: ++ mutex_unlock(&the_madc->lock); ++ ++ return ret; ++} ++EXPORT_SYMBOL(twl4030_madc_conversion); ++ ++static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc, ++ int chan, int on) ++{ ++ int ret; ++ u8 regval; ++ ++ /* Current generator is only available for ADCIN0 and ADCIN1. NB: ++ * ADCIN1 current generator only works when AC or VBUS is present */ ++ if (chan > 1) ++ return EINVAL; ++ ++ ret = twl4030_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, ++ ®val, TWL4030_BCI_BCICTL1); ++ if (on) ++ regval |= (chan) ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN; ++ else ++ regval &= (chan) ? ~TWL4030_BCI_ITHEN : ~TWL4030_BCI_TYPEN; ++ ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, ++ regval, TWL4030_BCI_BCICTL1); ++ ++ return ret; ++} ++ ++static int twl4030_madc_set_power(struct twl4030_madc_data *madc, int on) ++{ ++ u8 regval; ++ ++ regval = twl4030_madc_read(madc, TWL4030_MADC_CTRL1); ++ if (on) ++ regval |= TWL4030_MADC_MADCON; ++ else ++ regval &= ~TWL4030_MADC_MADCON; ++ twl4030_madc_write(madc, TWL4030_MADC_CTRL1, regval); ++ ++ return 0; ++} ++ ++static long twl4030_madc_ioctl(struct file *filp, unsigned int cmd, ++ unsigned long arg) ++{ ++ struct twl4030_madc_user_parms par; ++ int val, ret; ++ ++ ret = copy_from_user(&par, (void __user *) arg, sizeof(par)); ++ if (ret) { ++ dev_dbg(the_madc->dev, "copy_from_user: %d\n", ret); ++ return -EACCES; ++ } ++ ++ switch (cmd) { ++ case TWL4030_MADC_IOCX_ADC_RAW_READ: { ++ struct twl4030_madc_request req; ++ if (par.channel >= TWL4030_MADC_MAX_CHANNELS) ++ return -EINVAL; ++ ++ req.channels = (1 << par.channel); ++ req.do_avg = par.average; ++ req.method = TWL4030_MADC_SW1; ++ req.func_cb = NULL; ++ ++ val = twl4030_madc_conversion(&req); ++ if (val <= 0) { ++ par.status = -1; ++ } else { ++ par.status = 0; ++ par.result = (u16)req.rbuf[par.channel]; ++ } ++ break; ++ } ++ default: ++ return -EINVAL; ++ } ++ ++ ret = copy_to_user((void __user *) arg, &par, sizeof(par)); ++ if (ret) { ++ dev_dbg(the_madc->dev, "copy_to_user: %d\n", ret); ++ return -EACCES; ++ } ++ ++ return 0; ++} ++ ++static struct file_operations twl4030_madc_fileops = { ++ .owner = THIS_MODULE, ++ .unlocked_ioctl = twl4030_madc_ioctl ++}; ++ ++static struct miscdevice twl4030_madc_device = { ++ .minor = MISC_DYNAMIC_MINOR, ++ .name = "twl4030-madc", ++ .fops = &twl4030_madc_fileops ++}; ++ ++static int __init twl4030_madc_probe(struct platform_device *pdev) ++{ ++ struct twl4030_madc_data *madc; ++ struct twl4030_madc_platform_data *pdata = pdev->dev.platform_data; ++ int ret; ++ u8 regval; ++ ++ madc = kzalloc(sizeof *madc, GFP_KERNEL); ++ if (!madc) ++ return -ENOMEM; ++ ++ if (!pdata) { ++ dev_dbg(&pdev->dev, "platform_data not available\n"); ++ ret = -EINVAL; ++ goto err_pdata; ++ } ++ ++ madc->imr = (pdata->irq_line == 1) ? TWL4030_MADC_IMR1 : TWL4030_MADC_IMR2; ++ madc->isr = (pdata->irq_line == 1) ? TWL4030_MADC_ISR1 : TWL4030_MADC_ISR2; ++ ++ ret = misc_register(&twl4030_madc_device); ++ if (ret) { ++ dev_dbg(&pdev->dev, "could not register misc_device\n"); ++ goto err_misc; ++ } ++ twl4030_madc_set_power(madc, 1); ++ twl4030_madc_set_current_generator(madc, 0, 1); ++ ++ /* Enable ADCIN3 through 6 */ ++ ret = twl4030_i2c_read_u8(TWL4030_MODULE_USB, ++ ®val, TWL4030_USB_CARKIT_ANA_CTRL); ++ ++ regval |= TWL4030_USB_SEL_MADC_MCPC; ++ ++ ret = twl4030_i2c_write_u8(TWL4030_MODULE_USB, ++ regval, TWL4030_USB_CARKIT_ANA_CTRL); ++ ++ ++ ret = twl4030_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, ++ ®val, TWL4030_BCI_BCICTL1); ++ ++ regval |= TWL4030_BCI_MESBAT; ++ ++ ret = twl4030_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, ++ regval, TWL4030_BCI_BCICTL1); ++ ++ ret = request_irq(platform_get_irq(pdev, 0), twl4030_madc_irq_handler, ++ 0, "twl4030_madc", madc); ++ if (ret) { ++ dev_dbg(&pdev->dev, "could not request irq\n"); ++ goto err_irq; ++ } ++ ++ platform_set_drvdata(pdev, madc); ++ mutex_init(&madc->lock); ++ INIT_WORK(&madc->ws, twl4030_madc_work); ++ ++ the_madc = madc; ++ ++ return 0; ++ ++err_irq: ++ misc_deregister(&twl4030_madc_device); ++ ++err_misc: ++err_pdata: ++ kfree(madc); ++ ++ return ret; ++} ++ ++static int __exit twl4030_madc_remove(struct platform_device *pdev) ++{ ++ struct twl4030_madc_data *madc = platform_get_drvdata(pdev); ++ ++ twl4030_madc_set_power(madc, 0); ++ twl4030_madc_set_current_generator(madc, 0, 0); ++ free_irq(platform_get_irq(pdev, 0), madc); ++ cancel_work_sync(&madc->ws); ++ misc_deregister(&twl4030_madc_device); ++ ++ return 0; ++} ++ ++static struct platform_driver twl4030_madc_driver = { ++ .probe = twl4030_madc_probe, ++ .remove = __exit_p(twl4030_madc_remove), ++ .driver = { ++ .name = "twl4030_madc", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init twl4030_madc_init(void) ++{ ++ return platform_driver_register(&twl4030_madc_driver); ++} ++module_init(twl4030_madc_init); ++ ++static void __exit twl4030_madc_exit(void) ++{ ++ platform_driver_unregister(&twl4030_madc_driver); ++} ++module_exit(twl4030_madc_exit); ++ ++MODULE_ALIAS("platform:twl4030-madc"); ++MODULE_AUTHOR("Nokia Corporation"); ++MODULE_DESCRIPTION("twl4030 ADC driver"); ++MODULE_LICENSE("GPL"); ++ +-- +1.6.2.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/madc/0010-ARM-OMAP-Add-twl4030-madc-support-to-Overo.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/madc/0010-ARM-OMAP-Add-twl4030-madc-support-to-Overo.patch new file mode 100644 index 0000000000..3b5164c8e7 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/madc/0010-ARM-OMAP-Add-twl4030-madc-support-to-Overo.patch @@ -0,0 +1,32 @@ +From a7e4d5c1b598e866c98be33768d14c9cd80d864d Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Thu, 17 Dec 2009 14:27:15 -0800 +Subject: [PATCH 10/16] ARM: OMAP: Add twl4030 madc support to Overo + +--- + arch/arm/mach-omap2/board-overo.c | 5 +++++ + 1 files changed, 5 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c +index 1b94f2c..d0394d9 100644 +--- a/arch/arm/mach-omap2/board-overo.c ++++ b/arch/arm/mach-omap2/board-overo.c +@@ -390,10 +390,15 @@ static struct twl4030_codec_data overo_codec_data = { + + /* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */ + ++static struct twl4030_madc_platform_data overo_madc_data = { ++ .irq_line = 1, ++}; ++ + static struct twl4030_platform_data overo_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + .gpio = &overo_gpio_data, ++ .madc = &overo_madc_data, + .usb = &overo_usb_data, + .codec = &overo_codec_data, + .vmmc1 = &overo_vmmc1, +-- +1.6.2.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/madc/0011-ARM-OMAP-Add-twl4030-madc-support-to-Beagle.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/madc/0011-ARM-OMAP-Add-twl4030-madc-support-to-Beagle.patch new file mode 100644 index 0000000000..cba908fb3c --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/madc/0011-ARM-OMAP-Add-twl4030-madc-support-to-Beagle.patch @@ -0,0 +1,35 @@ +From 1a123bfff816abb027985923799c3e448e5cb7b7 Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Thu, 17 Dec 2009 14:32:36 -0800 +Subject: [PATCH 11/16] ARM: OMAP: Add twl4030 madc support to Beagle + +--- + arch/arm/mach-omap2/board-omap3beagle.c | 5 +++++ + 1 files changed, 5 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index d00b089..955da5b 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -314,6 +314,10 @@ static struct twl4030_codec_data beagle_codec_data = { + .audio = &beagle_audio_data, + }; + ++static struct twl4030_madc_platform_data beagle_madc_data = { ++ .irq_line = 1, ++}; ++ + static struct twl4030_platform_data beagle_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, +@@ -322,6 +326,7 @@ static struct twl4030_platform_data beagle_twldata = { + .usb = &beagle_usb_data, + .gpio = &beagle_gpio_data, + .codec = &beagle_codec_data, ++ .madc = &beagle_madc_data, + .vmmc1 = &beagle_vmmc1, + .vsim = &beagle_vsim, + .vdac = &beagle_vdac, +-- +1.6.2.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/madc/0013-ARM-OMAP-Add-missing-twl4030-madc-header-file.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/madc/0013-ARM-OMAP-Add-missing-twl4030-madc-header-file.patch new file mode 100644 index 0000000000..b021871993 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/madc/0013-ARM-OMAP-Add-missing-twl4030-madc-header-file.patch @@ -0,0 +1,149 @@ +From c7412fa6dec1460ac0d1895f16421732e5174406 Mon Sep 17 00:00:00 2001 +From: Steve Sakoman +Date: Thu, 17 Dec 2009 15:54:58 -0800 +Subject: [PATCH 13/16] ARM: OMAP: Add missing twl4030 madc header file + +--- + include/linux/i2c/twl4030-madc.h | 130 ++++++++++++++++++++++++++++++++++++++ + 1 files changed, 130 insertions(+), 0 deletions(-) + create mode 100644 include/linux/i2c/twl4030-madc.h + +diff --git a/include/linux/i2c/twl4030-madc.h b/include/linux/i2c/twl4030-madc.h +new file mode 100644 +index 0000000..341a665 +--- /dev/null ++++ b/include/linux/i2c/twl4030-madc.h +@@ -0,0 +1,130 @@ ++/* ++ * include/linux/i2c/twl4030-madc.h ++ * ++ * TWL4030 MADC module driver header ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Mikko Ylinen ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA ++ * 02110-1301 USA ++ * ++ */ ++ ++#ifndef _TWL4030_MADC_H ++#define _TWL4030_MADC_H ++ ++struct twl4030_madc_conversion_method { ++ u8 sel; ++ u8 avg; ++ u8 rbase; ++ u8 ctrl; ++}; ++ ++#define TWL4030_MADC_MAX_CHANNELS 16 ++ ++struct twl4030_madc_request { ++ u16 channels; ++ u16 do_avg; ++ u16 method; ++ u16 type; ++ int active; ++ int result_pending; ++ int rbuf[TWL4030_MADC_MAX_CHANNELS]; ++ void (*func_cb)(int len, int channels, int *buf); ++}; ++ ++enum conversion_methods { ++ TWL4030_MADC_RT, ++ TWL4030_MADC_SW1, ++ TWL4030_MADC_SW2, ++ TWL4030_MADC_NUM_METHODS ++}; ++ ++enum sample_type { ++ TWL4030_MADC_WAIT, ++ TWL4030_MADC_IRQ_ONESHOT, ++ TWL4030_MADC_IRQ_REARM ++}; ++ ++#define TWL4030_MADC_CTRL1 0x00 ++#define TWL4030_MADC_CTRL2 0x01 ++ ++#define TWL4030_MADC_RTSELECT_LSB 0x02 ++#define TWL4030_MADC_SW1SELECT_LSB 0x06 ++#define TWL4030_MADC_SW2SELECT_LSB 0x0A ++ ++#define TWL4030_MADC_RTAVERAGE_LSB 0x04 ++#define TWL4030_MADC_SW1AVERAGE_LSB 0x08 ++#define TWL4030_MADC_SW2AVERAGE_LSB 0x0C ++ ++#define TWL4030_MADC_CTRL_SW1 0x12 ++#define TWL4030_MADC_CTRL_SW2 0x13 ++ ++#define TWL4030_MADC_RTCH0_LSB 0x17 ++#define TWL4030_MADC_GPCH0_LSB 0x37 ++ ++#define TWL4030_MADC_MADCON (1<<0) /* MADC power on */ ++#define TWL4030_MADC_BUSY (1<<0) /* MADC busy */ ++#define TWL4030_MADC_EOC_SW (1<<1) /* MADC conversion completion */ ++#define TWL4030_MADC_SW_START (1<<5) /* MADC SWx start conversion */ ++ ++#define TWL4030_MADC_ADCIN0 (1<<0) ++#define TWL4030_MADC_ADCIN1 (1<<1) ++#define TWL4030_MADC_ADCIN2 (1<<2) ++#define TWL4030_MADC_ADCIN3 (1<<3) ++#define TWL4030_MADC_ADCIN4 (1<<4) ++#define TWL4030_MADC_ADCIN5 (1<<5) ++#define TWL4030_MADC_ADCIN6 (1<<6) ++#define TWL4030_MADC_ADCIN7 (1<<7) ++#define TWL4030_MADC_ADCIN8 (1<<8) ++#define TWL4030_MADC_ADCIN9 (1<<9) ++#define TWL4030_MADC_ADCIN10 (1<<10) ++#define TWL4030_MADC_ADCIN11 (1<<11) ++#define TWL4030_MADC_ADCIN12 (1<<12) ++#define TWL4030_MADC_ADCIN13 (1<<13) ++#define TWL4030_MADC_ADCIN14 (1<<14) ++#define TWL4030_MADC_ADCIN15 (1<<15) ++ ++/* Fixed channels */ ++#define TWL4030_MADC_BTEMP TWL4030_MADC_ADCIN1 ++#define TWL4030_MADC_VBUS TWL4030_MADC_ADCIN8 ++#define TWL4030_MADC_VBKB TWL4030_MADC_ADCIN9 ++#define TWL4030_MADC_ICHG TWL4030_MADC_ADCIN10 ++#define TWL4030_MADC_VCHG TWL4030_MADC_ADCIN11 ++#define TWL4030_MADC_VBAT TWL4030_MADC_ADCIN12 ++ ++/* BCI related - XXX To be moved elsewhere */ ++#define TWL4030_BCI_BCICTL1 0x23 ++#define TWL4030_BCI_MESBAT (1<<1) ++#define TWL4030_BCI_TYPEN (1<<4) ++#define TWL4030_BCI_ITHEN (1<<3) ++ ++/* USB related - XXX To be moved elsewhere */ ++#define TWL4030_USB_CARKIT_ANA_CTRL 0xBB ++#define TWL4030_USB_SEL_MADC_MCPC (1<<3) ++ ++#define TWL4030_MADC_IOC_MAGIC '`' ++#define TWL4030_MADC_IOCX_ADC_RAW_READ _IO(TWL4030_MADC_IOC_MAGIC, 0) ++ ++struct twl4030_madc_user_parms { ++ int channel; ++ int average; ++ int status; ++ u16 result; ++}; ++ ++int twl4030_madc_conversion(struct twl4030_madc_request *conv); ++ ++#endif +-- +1.6.2.4 + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/sctp-fix.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/sctp-fix.patch new file mode 100644 index 0000000000..fad8e1b67b --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/sctp-fix.patch @@ -0,0 +1,47 @@ +From patchwork Tue Dec 8 19:52:09 2009 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: net/sctp/sysctl.c: Remove dead strategy handler +Date: Tue, 08 Dec 2009 19:52:09 -0000 +From: Ingo Molnar +X-Patchwork-Id: 65744 + +* Ingo Molnar wrote: + +> hi Dave, +> +> i just switched to today's -git tree and there's this new build failure +> on x86: +> +> net/sctp/sysctl.c:251: error: unknown field 'strategy' specified in initializer +> net/sctp/sysctl.c:251: error: 'sysctl_intvec' undeclared here (not in a function) +> +> havent looked into it yet - config attached. + +That's interaction with the strategy handler removal from Eric. I think +the patch below will do the trick - the callsites have been updated +already to use proc_handler, so ->handler was a dead field. + + Ingo + +Signed-off-by: Ingo Molnar + +--- +To unsubscribe from this list: send the line "unsubscribe linux-kernel" in +the body of a message to majordomo@vger.kernel.org +More majordomo info at http://vger.kernel.org/majordomo-info.html +Please read the FAQ at http://www.tux.org/lkml/ + +diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c +index 419e1e9..832590b 100644 +--- a/net/sctp/sysctl.c ++++ b/net/sctp/sysctl.c +@@ -248,7 +248,6 @@ static ctl_table sctp_table[] = { + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, +- .strategy = &sysctl_intvec, + .extra1 = &one, + .extra2 = &rwnd_scale_max, + }, diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/usb/ehci-omap.c-mach-to-plat.diff b/recipes/kexecboot/linux-kexecboot-2.6.32/usb/ehci-omap.c-mach-to-plat.diff new file mode 100644 index 0000000000..faa1ae025c --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/usb/ehci-omap.c-mach-to-plat.diff @@ -0,0 +1,12 @@ +--- a/drivers/usb/host/ehci-omap.c ++++ b/drivers/usb/host/ehci-omap.c +@@ -37,7 +37,7 @@ + #include + #include + #include +-#include ++#include + + /* + * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES + diff --git a/recipes/kexecboot/linux-kexecboot-2.6.32/usb/ehci.patch b/recipes/kexecboot/linux-kexecboot-2.6.32/usb/ehci.patch new file mode 100644 index 0000000000..569561185a --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.32/usb/ehci.patch @@ -0,0 +1,46 @@ +From patchwork Wed Nov 25 08:56:48 2009 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [2/2] usb: ehci: Allow EHCI to be built on OMAP3 +Date: Wed, 25 Nov 2009 08:56:48 -0000 +From: Olof Johansson +X-Patchwork-Id: 62727 + +OMAP34XX has EHCI, so select USB_ARCH_HAS_EHCI. + +Signed-off-by: Olof Johansson +Acked-by: Anand Gadiyar + +--- +On Sat, Nov 07, 2009 at 01:16:32AM +0530, Anand Gadiyar wrote: +> usb: ehci: Allow EHCI to be built on OMAP3 +> +> OMAP3 chips have a built-in EHCI controller. +> The recently introduced omap ehci-hcd driver missed +> out on selecting USB_ARCH_HAS_EHCI in Kconfig. +> +> Without this, the driver cannot be built. + +This is a losing battle. It scales much better to select the option +from OMAP34XX, instead of starting to enumerate the various platforms +in drivers/usb. + + +-- +To unsubscribe from this list: send the line "unsubscribe linux-omap" in +the body of a message to majordomo@vger.kernel.org +More majordomo info at http://vger.kernel.org/majordomo-info.html + +diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig +index 034d990..a913b05 100644 +--- a/arch/arm/mach-omap2/Kconfig ++++ b/arch/arm/mach-omap2/Kconfig +@@ -18,6 +18,7 @@ config ARCH_OMAP2430 + config ARCH_OMAP34XX + bool "OMAP34xx Based System" + depends on ARCH_OMAP3 ++ select USB_ARCH_HAS_EHCI + + config ARCH_OMAP3430 + bool "OMAP3430 support" diff --git a/recipes/kexecboot/linux-kexecboot_2.6.32.bb b/recipes/kexecboot/linux-kexecboot_2.6.32.bb index 2839ff2928..fb137bb7ba 100644 --- a/recipes/kexecboot/linux-kexecboot_2.6.32.bb +++ b/recipes/kexecboot/linux-kexecboot_2.6.32.bb @@ -1,6 +1,7 @@ require linux-kexecboot.inc S = "${WORKDIR}/linux-${PV}" +S_omap3 = "${WORKDIR}/git" # Mark archs/machines that this kernel supports DEFAULT_PREFERENCE = "-1" @@ -11,6 +12,9 @@ DEFAULT_PREFERENCE_poodle = "-1" DEFAULT_PREFERENCE_spitz = "-1" DEFAULT_PREFERENCE_tosa = "-1" +DEFAULT_PREFERENCE_omap3 = "1" + + SRC_URI += "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \ # file://v3-1-4-Add-support-for-LZO-compressed-kernels.patch;patch=1;status=pending \ # file://v3-2-4-Add-support-for-LZO-compressed-kernels-for-ARM.patch;patch=1;status=pending \ @@ -35,3 +39,32 @@ SRC_URI_append_collie = "${ZAURUSPATCHES}" SRC_URI_append_poodle = "${ZAURUSPATCHES}" SRC_URI_append_spitz = "${ZAURUSPATCHES}" SRC_URI_append_tosa = "${ZAURUSPATCHES}" + + +SRC_URI_append_omap3 = " git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git;protocol=git;rev=6833f1a8cdcb65a370f898bde6b6af63f81962df \ +file://defconfig \ +file://sctp-fix.patch;patch=1 \ +file://cm-t35/0001-omap3-cm-t35-add-mux-initialization.patch;patch=1 \ +file://cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch;patch=1 \ +file://cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch;patch=1 \ +file://cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch;patch=1 \ +file://cm-t35/0006-omap3-cm-t35-update-defconfig.patch;patch=1 \ +file://0001-ARM-OMAP-Overo-Add-support-for-second-ethernet-po.patch;patch=1 \ +file://0003-drivers-net-smsc911x-return-ENODEV-if-device-is-n.patch;patch=1 \ +file://0004-drivers-input-touchscreen-ads7846-return-ENODEV.patch;patch=1 \ +file://0005-ARM-OMAP-add-support-for-TCT-Zippy-to-Beagle-board.patch;patch=1 \ +file://0006-ARM-OMAP-Make-beagle-u-boot-partition-writable.patch;patch=1 \ +file://0007-ASoC-enable-audio-capture-by-default-for-twl4030.patch;patch=1 \ +file://0009-MTD-NAND-omap2-proper-fix-for-subpage-read-ECC-error.patch;patch=1 \ +file://madc/0009-drivers-mfd-add-twl4030-madc-driver.patch;patch=1 \ +file://madc/0010-ARM-OMAP-Add-twl4030-madc-support-to-Overo.patch;patch=1 \ +file://madc/0011-ARM-OMAP-Add-twl4030-madc-support-to-Beagle.patch;patch=1 \ +file://madc/0013-ARM-OMAP-Add-missing-twl4030-madc-header-file.patch;patch=1 \ +file://dss2/0012-OMAP-DSS2-Add-support-for-LG-Philips-LB035Q02-pane.patch;patch=1 \ +#file://dss2/0014-OMAP-DSS-Add-DSS2-support-for-Overo.patch;patch=1 \ +file://dss2/0015-OMAP-DSS-Add-DSS2-support-for-Beagle.patch;patch=1 \ +file://dss2/0016-video-add-timings-for-hd720.patch;patch=1 \ +" + + + -- cgit v1.2.3