From f3c738f66b66c663f682f9154b200ffeae89902d Mon Sep 17 00:00:00 2001 From: Mike Westerhof Date: Wed, 1 Mar 2006 02:23:55 +0000 Subject: unslung-rootfs: unsling fix, empty pcmcia dir fix - unsling script fixed for no-automatic mount, updated README and NOTES, change to remove empty pcmcia dir --- packages/meta/unslung-image.bb | 5 +++- .../nslu2-binary-only/unslung-rootfs-2.3r63/NOTES | 29 +++++++++++++--------- .../nslu2-binary-only/unslung-rootfs-2.3r63/README | 24 ++++++++++++------ .../unslung-rootfs-2.3r63/unsling | 28 +++++++++++++++++++-- .../nslu2-binary-only/unslung-rootfs_2.3r63.bb | 2 +- 5 files changed, 64 insertions(+), 24 deletions(-) (limited to 'packages') diff --git a/packages/meta/unslung-image.bb b/packages/meta/unslung-image.bb index caedab6b48..8ab50cebf4 100644 --- a/packages/meta/unslung-image.bb +++ b/packages/meta/unslung-image.bb @@ -1,5 +1,5 @@ LICENSE = MIT -PR = "r12" +PR = "r13" IMAGE_BASENAME = "unslung" @@ -55,6 +55,9 @@ unslung_clean_image () { echo "exit 0" >> ${IMAGE_ROOTFS}/sbin/depmod chmod ugo+x ${IMAGE_ROOTFS}/sbin/depmod + # Don't need this empty directory hanging around + rm -rf ${IMAGE_ROOTFS}/lib/modules/2.4.22-xfs/pcmcia + # Strip symbols and fix permissions on the libgcc_s.so.1 library ${STRIP} ${IMAGE_ROOTFS}/lib/libgcc_s.so.1 chmod ugo+x ${IMAGE_ROOTFS}/lib/libgcc_s.so.1 diff --git a/packages/nslu2-binary-only/unslung-rootfs-2.3r63/NOTES b/packages/nslu2-binary-only/unslung-rootfs-2.3r63/NOTES index 98839fffa1..d37bf07d6b 100644 --- a/packages/nslu2-binary-only/unslung-rootfs-2.3r63/NOTES +++ b/packages/nslu2-binary-only/unslung-rootfs-2.3r63/NOTES @@ -470,15 +470,20 @@ to the slingbox version of mount. 6.6: -- Changed the code that handles the ".ext3flash" functionality so that it can - handle booting from either /dev/sda or /dev/sdb. -- Better text, and cleanup of the "telnet.htm" management page. -- Unsling now creates the wmtp and utmp files. -- Unsling now "edits" the .../conf/passwd file instead of replacing it. -- Ipkg dependencies fixed so that kernel-modules no longer need to be - "force-installed". -- Support for mounting ISO images stored on the local disk added - (kernel-modules loop.o and isofs.o are now created). -- The keyspan.o USB serial kernel-module is also created at build time. -- README file updated to reflect the new unsling script as well as the - change in preferred port for the primary external disk. +Changed the code that handles the ".ext3flash" functionality so that it can +handle booting from either /dev/sda or /dev/sdb. +Cleanup of the "telnet.htm" management page. +Unsling now creates the wmtp and utmp files. +Unsling now "edits" the .../conf/passwd file instead of replacing it. +Ipkg dependencies fixed so that kernel-modules no longer need "force-install". +Support for loopback mounting ISO images (loop.o and isofs.o are now created). +The keyspan.o USB serial kernel-module is also created at build time. +README file updated to reflect the new unsling script as well as the +change in preferred port for the primary external disk. + +6.7: + +Added original "netconsole" code as a kernel module +Fixed problem with password changing from the GUI and automatic mounting of +drives and flash devices in port 1. +Remove unnecessary directory /lib/modules/2.4.22-xfs/pcmcia. diff --git a/packages/nslu2-binary-only/unslung-rootfs-2.3r63/README b/packages/nslu2-binary-only/unslung-rootfs-2.3r63/README index 9dd101c426..2667692af9 100644 --- a/packages/nslu2-binary-only/unslung-rootfs-2.3r63/README +++ b/packages/nslu2-binary-only/unslung-rootfs-2.3r63/README @@ -48,16 +48,17 @@ PRE-INSTALLATION CONSIDERATIONS disk. The remainder of these instructions assume that you have a suitable external disk or flash disk you will be using for this purpose. - [A word on ports: completely contrary to previous versions of Unslung, - the preferred port for the Unslung external disk as of Unslung 6.x is - often port 2. This will free up the far-more-flexible port number 1 - for other uses. + A few words on selecting which port to use: + + Completely contrary to previous versions of Unslung, the preferred port + for the Unslung external disk as of Unslung 6.x is often port 2. This + will free up the far-more-flexible port number 1 for other uses. However, this "feature" (part of the Linksys R63 firmware) may cause some small consternation for users upgrading from earlier versions of Unslung. - But in general, leaving the drives plugged in as-is will likely be the - least painful solution. The basic challenge faced by upgraders is that - *something* must change: if the drive remains in port 1, then it will + But in general, swapping the drives between the two ports will likely be + the least painful solution. The basic challenge faced by upgraders is + that *something* must change: if the drive remains in port 1, then it will remain mounted at "/share/hdd/..." but the drive nomenclature will change from "/dev/sda" to "/dev/sdb". On the other hand, if the drive is moved to port 2, then it will remain "/dev/sda" but it will then be mounted at @@ -72,7 +73,14 @@ PRE-INSTALLATION CONSIDERATIONS port 2. - if you have two drives, and both will be formatted by the NSLU2, then unsling to the drive in port 1. - ] + + If you unsling to port 2, and later add a drive in port 1 that will be + formatted by the NSLU2, initial testing indicates that it should work + as expected -- however, the drive to be added MUST be formatted by the + unslung NSLU2 in question, and once formatted, the drive must NOT be + removed -- as the unslung NSLU2 will move it's "conf" datafiles to the + drive in port 1 during the format, and thus will be dependent upon the + presence of both drives for proper operation. You have been warned! 3) The external disk that you use as the target for package installation must be (or have previously been) formatted by the NSLU2. It is possible to diff --git a/packages/nslu2-binary-only/unslung-rootfs-2.3r63/unsling b/packages/nslu2-binary-only/unslung-rootfs-2.3r63/unsling index 51fa7ed871..c8b3dc8662 100755 --- a/packages/nslu2-binary-only/unslung-rootfs-2.3r63/unsling +++ b/packages/nslu2-binary-only/unslung-rootfs-2.3r63/unsling @@ -19,12 +19,14 @@ if [ $# -eq 1 ] ; then targconf=/share/hdd/conf flag=.sdb1root htmlinfo="disk1, /dev/sdb1" + fixconf=0 elif [ "$1" = "disk2" ] ; then mtch="/dev/sda1 /share/flash/data ext3 rw 0 0" targ=/share/flash/data targconf=/share/flash/conf flag=.sda1root htmlinfo="disk2, /dev/sda1" + fixconf=1 else echo $usage exit 1 @@ -126,13 +128,13 @@ if [ -f $targ/.unslung ] ; then fi # Change the root password -if [ "$nopw" = 0 ] ; then +if [ "$nopw" -eq 0 ] ; then echo echo "Please enter the new root password. This will be the new root" echo "password used when the NSLU2 boots up with or without disks" echo passwd - if [ $? != 0 ] ; then + if [ $? -ne 0 ] ; then echo "Error setting password." exit 1 fi @@ -190,6 +192,28 @@ chmod 644 $targ/var/log/wtmp touch $targ/var/run/utmp chmod 644 $targ/var/run/utmp +# The "user password" Linksys utility is hard-coded to /share/hdd; also the +# QuickSet utility seems to have some difficulty as well. Ugly fix is to +# add symlinks if we are unslinging to /share/flash. It might seem more +# reasonable to point to /etc/passwd, for example, but this approach seems to +# be more likely to avoid looping symlinks. + +if [ "$fixconf" -eq 1 ] ; then + ln -s ../../flash/conf/.htpasswd $targ/share/hdd/conf/.htpasswd + ln -s ../../flash/conf/backup_sh.conf $targ/share/hdd/conf/backup_sh.conf + ln -s ../../flash/conf/config $targ/share/hdd/conf/config + ln -s ../../flash/conf/group $targ/share/hdd/conf/group + ln -s ../../flash/conf/passwd $targ/share/hdd/conf/passwd + ln -s ../../flash/conf/server.log $targ/share/hdd/conf/server.log + ln -s ../../flash/conf/share $targ/share/hdd/conf/share + ln -s ../../flash/conf/share.info $targ/share/hdd/conf/share.info + ln -s ../../flash/conf/smb.conf $targ/share/hdd/conf/smb.conf + ln -s ../../flash/conf/smbpasswd $targ/share/hdd/conf/smbpasswd + ln -s ../../flash/conf/tmp $targ/share/hdd/conf/tmp + ln -s ../../flash/conf/upgrade $targ/share/hdd/conf/upgrade + ln -s ../../flash/conf/usrgrp.info $targ/share/hdd/conf/usrgrp.info +fi + # Create the boot flag file. rm -f /.sd??root $targ/.sd??root diff --git a/packages/nslu2-binary-only/unslung-rootfs_2.3r63.bb b/packages/nslu2-binary-only/unslung-rootfs_2.3r63.bb index e9b88acb37..e572411583 100644 --- a/packages/nslu2-binary-only/unslung-rootfs_2.3r63.bb +++ b/packages/nslu2-binary-only/unslung-rootfs_2.3r63.bb @@ -1,6 +1,6 @@ SECTION = "base" -PR = "r9" +PR = "r10" DEPENDS = "nslu2-linksys-libs" -- cgit v1.2.3