From e1b9b2bd445ef6a345c7385fe0ea846a029937d1 Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Wed, 8 Feb 2006 10:19:41 +0000 Subject: ep93xx-kernel: add kernel for ep93xx machine + patch from cirrus-logic git tree + defconfig --- packages/linux/ep93xx-kernel/.mtn2git_empty | 0 packages/linux/ep93xx-kernel/defconfig | 920 + .../ep93xx-kernel/linux-2.6.15-ep93xx-gao19.diff | 43746 +++++++++++++++++++ packages/linux/ep93xx-kernel_2.6.15.bb | 19 + 4 files changed, 44685 insertions(+) create mode 100644 packages/linux/ep93xx-kernel/.mtn2git_empty create mode 100644 packages/linux/ep93xx-kernel/defconfig create mode 100644 packages/linux/ep93xx-kernel/linux-2.6.15-ep93xx-gao19.diff create mode 100644 packages/linux/ep93xx-kernel_2.6.15.bb (limited to 'packages') diff --git a/packages/linux/ep93xx-kernel/.mtn2git_empty b/packages/linux/ep93xx-kernel/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 diff --git a/packages/linux/ep93xx-kernel/defconfig b/packages/linux/ep93xx-kernel/defconfig new file mode 100644 index 0000000000..1a0aa51aea --- /dev/null +++ b/packages/linux/ep93xx-kernel/defconfig @@ -0,0 +1,920 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.9-rc2-ep93xx +# Mon Nov 8 16:40:30 2004 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_IOMAP=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +CONFIG_ARCH_EP93XX=y +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE_PB is not set +# CONFIG_ARCH_IMX is not set + +# +# EP93xx +# +# CONFIG_ARCH_EP9301 is not set +# CONFIG_ARCH_EP9302 is not set +CONFIG_ARCH_EP9312=y +# CONFIG_ARCH_EP9315 is not set +CONFIG_MACH_EDB9312=y +# CONFIG_MACH_ACC is not set +CONFIG_EP93XX_DMA=y +CONFIG_ARCH_EP93XX_IDE=y +CONFIG_EP93XX_SSP=y +CONFIG_EP93XX_SSP_CIRRUS=y +# CONFIG_EP93XX_SSP_LINUX is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set + +# +# General setup +# +CONFIG_DISCONTIGMEM=y +CONFIG_ARM_AMBA=y +# CONFIG_ZBOOT_ROM is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 + +# +# At least one math emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=y +CONFIG_BINFMT_MISC=y + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_PM is not set +# CONFIG_PREEMPT is not set +# CONFIG_ARTHUR is not set +CONFIG_CMDLINE="root=/dev/hda1" +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_FTL=y +CONFIG_NFTL=y +CONFIG_NFTL_RW=y +CONFIG_INFTL=y + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=y +CONFIG_MTD_ABSENT=y +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x60000000 +CONFIG_MTD_PHYSMAP_LEN=0x02000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_EDB7312 is not set +# CONFIG_MTD_IMPA7 is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_SLRAM=y +CONFIG_MTD_PHRAM=y +CONFIG_MTD_MTDRAM=y +CONFIG_MTDRAM_TOTAL_SIZE=512 +CONFIG_MTDRAM_ERASE_SIZE=1 +CONFIG_MTDRAM_ABS_POS=0x20000000 +# CONFIG_MTD_BLKMTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=12288 +CONFIG_BLK_DEV_INITRD=y + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_HW_FLOWCONTROL is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_EP93XX_ETHERNET=y +# CONFIG_SMC91X is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +# CONFIG_IDE_TASKFILE_IO is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_EP93XX=y +# CONFIG_BLK_DEV_IDEDMA_EP93XX is not set +CONFIG_IDE_ARM=y +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_RAW is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_EP93XX=y +CONFIG_KEYBOARD_EP93XX_SPI=y +CONFIG_KEYBOARD_EP93XX_8X8=y +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_SERIAL=y +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +CONFIG_TOUCHSCREEN_EP93XX=y +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +# CONFIG_SERIAL_AMBA_PL011 is not set +CONFIG_SERIAL_EP93XX=y +CONFIG_SERIAL_EP93XX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_EP93XX_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +CONFIG_I2C_EP93XX=y +# CONFIG_I2C_ISA is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Hardware Sensors Chip support +# +CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set + +# +# Other I2C Chip support +# +CONFIG_SENSORS_DS1337=y +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVFS_MOUNT is not set +# CONFIG_DEVFS_DEBUG is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_NAND is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +# CONFIG_EXPORTFS is not set +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_ARMCLCD is not set +# CONFIG_FB_CX25871_I2C is not set +CONFIG_FB_EP93XX=y +# CONFIG_FB_CRT_EP93XX is not set +CONFIG_FB_LCD_EP93XX=y +# CONFIG_FB_LCD_EP93XX_SHARP is not set +# CONFIG_FB_CX25871 is not set +# CONFIG_FB_EP93XX_8BPP is not set +# CONFIG_FB_EP93XX_16BPP_565 is not set +# CONFIG_FB_EP93XX_24BPP is not set +CONFIG_FB_EP93XX_32BPP=y +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_FONT_6x11=y +CONFIG_FONT_PEARL_8x8=y +CONFIG_FONT_ACORN_8x8=y +# CONFIG_FONT_MINI_4x6 is not set +CONFIG_FONT_SUN8x16=y +CONFIG_FONT_SUN12x22=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=y +# CONFIG_SOUND_BT878 is not set +# CONFIG_SOUND_FUSION is not set +# CONFIG_SOUND_CS4281 is not set +# CONFIG_SOUND_SONICVIBES is not set +# CONFIG_SOUND_TRIDENT is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +# CONFIG_SOUND_OSS is not set +# CONFIG_SOUND_TVMIXER is not set +# CONFIG_SOUND_AD1980 is not set + +# +# Misc devices +# + +# +# USB support +# +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# Kernel hacking +# +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +CONFIG_FRAME_POINTER=y +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_PRINTK_HACK=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_CRC_CCITT=y +CONFIG_CRC32=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/packages/linux/ep93xx-kernel/linux-2.6.15-ep93xx-gao19.diff b/packages/linux/ep93xx-kernel/linux-2.6.15-ep93xx-gao19.diff new file mode 100644 index 0000000000..3dc6b004b8 --- /dev/null +++ b/packages/linux/ep93xx-kernel/linux-2.6.15-ep93xx-gao19.diff @@ -0,0 +1,43746 @@ +diff --git a/Documentation/arm/ep93xx/config.txt b/Documentation/arm/ep93xx/config.txt +new file mode 100644 +index 0000000..9d13a15 +--- /dev/null ++++ b/Documentation/arm/ep93xx/config.txt +@@ -0,0 +1,207 @@ ++------------------------------------------------------------------------- ++config.txt ++ ++Information on configuration options in the Linux kernel for the Cirrus ++EP93xx. ++ ++Note to developers: Let's stick to the essentials on "how to turn things ++on in the Linux build." This information is presented from the standpoint ++of someone doing a build, looking at a make menuconfig screen. If what you ++are describing doesn't fit here, it should get its own document to go into ++the level of detail you feel is most practicle. ++------------------------------------------------------------------------- ++ ++All options configured as built-in drivers, not loadable modules. ++So on options that are selected by < >, select <*>, not . To ++do this either hit 'y' or hit the space bar twice. ++ ++ ++---------------- ++Audio ++---------------- ++Needed by: ++Needs: DMA Support, dev fs. ++ ++Ac97 and I2S audio are currently mutually exclusive. ++ ++To enable Ac97 Audio: ++ Go into "Sound --->" ++ Enable "Sound Support" ++ Enable "OSS sound modules" ++ Select "Ac97" for "Cirrus EP93xx Sound Support" ++ ++To enable I2S Audio: ++ Go into "Sound --->" ++ Enable "Sound Support" ++ Enable "OSS sound modules" ++ Select "I2S" for "Cirrus EP93xx Sound Support" ++ If you have an EDB9312 board, select "CS4228A" for "Cirrus I2S Codec Support" ++ If you have an EDB9301 board, select "CS4271" for "Cirrus I2S Codec Support" ++ ++ ++---------------- ++Dev Fs ++---------------- ++ DEVFS support is no longer available. ++ Please consider using udev or create device nodes manually instead. ++ You might also need to adapt your startup scripts and userspace ++ apps. ++ ++---------------- ++DMA ++---------------- ++Needed by: Audio, IDE/DMA ++Needs: ++ ++To enable DMA: ++ Go into "System Type --->" ++ Go into "EP93XX Options --->" ++ Enable "EP93XX Internal DMA Support" ++ ++ ++---------------- ++IDE ++---------------- ++Needed by: ++Needs: ++ To Turn on IDE support for the platform, you need to enable ++General IDE support first - CONFIG_BLK_DEV_IDE, CONFIG_BLK_DEV_IDEDISK, ++CONFIG_BLK_DEV_IDECD. ++ ++ If multiword DMA and ultra DMA support is needed, general DMA support for ++the platform must be enabled first. See DMA section of this document for ++options to enable DMA for the platform. ++ ++ If CDROM support is enabled, ISO9660 file system support should be enabled. ++If a DVD support is needed, UDF file system support should be enabled. ++ ++To enable CONFIG_BLK_DEV_IDE: ++ Go into "ATA /ATAPI/MFM/RLL support --->" ++ Enable "ATA/ATAPI/MFM/RLL support" ++ Go into "IDE, ATA, and ATAPI Block devices --->" ++ Enable "Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support" ++ ++To enable CONFIG_BLK_DEV_IDEDISK: ++ Go into "ATA /ATAPI/MFM/RLL support --->" ++ Go into "IDE, ATA, and ATAPI Block devices --->" ++ Enable "Include IDE/ATA-2 DISK support" ++ ++To enable CONFIG_BLK_DEV_IDECD: ++ Go into "ATA /ATAPI/MFM/RLL support --->" ++ Go into "IDE, ATA, and ATAPI Block devices --->" ++ Enable "Include IDE/ATAPI CDROM support" ++ ++To enable EP93XX IDE (PIO mode only): ++ Go into "ATA /ATAPI/MFM/RLL support --->" ++ Go into "IDE, ATA, and ATAPI Block devices --->" ++ Enable "EP93XX IDE Support" ++ ++To enable EP93XX IDE DMA (mdma and udma modes): ++ Go into "ATA /ATAPI/MFM/RLL support --->" ++ Go into "IDE, ATA, and ATAPI Block devices --->" ++ Enable "EP93XX IDE DMA support" ++ ++To enabled ISO 9660 file system support: ++ Go into "File systems --->" ++ Enable "ISo 9660 CDROM file system support" ++ Enable "Microsoft Joliet CDROM extensions" ++ ++To enable UDF file system support: ++ Go into "File systems --->" ++ Enable "UDF file system support (read only)" ++ ++See also /Documentation/arm/ep93xx/ide-hard-drive-support.txt for information ++on configuring the hard drive. ++ ++---------------- ++IrDA ++---------------- ++Described in /Documentation/arm/ep93xx/irda.txt ++ ++ ++---------------- ++NFS ++---------------- ++Described in /Documentation/arm/ep93xx/nfs.txt ++ ++ ++---------------- ++Serial Terminal ++---------------- ++To enable serial terminal: ++ Go into "Character devices --->" ++ Turn off "Support for console on virtual terminal" ++ Turn off "Virtual terminal" ++ Go into "Serial drivers --->" ++ Turn on "Cirrus EP93xx ARM AMBA serial port support" ++ Turn on "Support for console on EP93xx serial port" ++ ++Serial terminal is the bottom jack of J7. ++Format is 57600,8N1, flow control: "none". ++ ++ ++---------------- ++Touchscreen ++---------------- ++To enable touchscreen driver: ++ Go into "Character devices --->" ++ Go into "Mice --->" ++ Enable "Mouse Support (not serial and bus mice)" ++ Disable "PS/2 Mouse (aka "auxiliary device") support ++ Enable "EP93xx touch screen support" ++ ++ ++---------------- ++USB ++---------------- ++The order of all of the following statements is critical as some options enable ++other options. ++ ++To enable basic USB support(required for all devices listed below): ++ Go into "USB support --->" ++ Enable "Support for USB" ++ Enable "Preliminary USB device filesystem" (optional) ++ Enable "EP93XX OHCI-compatible host interface support" ++ ++To enable support for USB mouse: ++ Go into "Input core support --->" ++ Enable "Input core support" ++ Enable "Mouse support" ++ ++ Go back to the top level of menuconfig ++ ++ Go into "USB support --->" ++ Enable "USB Human Interface Device (full HID) support" ++ Enable "HID input layer support" ++ ++To enable support for USB Keyboard: ++ Go into "Input core support --->" ++ Enable "Input core support" ++ Enable "Keyboard support" ++ ++ Go back to the top level of menuconfig ++ ++ Go into "USB support --->" ++ Enable "USB Human Interface Device (full HID) support" ++ Enable "HID input layer support" ++ ++ Go back to the top level of menuconfig ++ Go into "Character devices --->" ++ Set EP93xx Keyboard Support to "USB" ++ ++To enable USB Mass Storage support: ++ Go into "SCSI Support --->" ++ Enable "SCSI Support" ++ Enable "SCSI disk support" ++ ++ Go back to the top level of menuconfig ++ ++ Go into "USB support --->" ++ Enable "USB Mass Storage support" ++ ++ Go back to the top level of menuconfig ++ ++(optional - Do this if you want to mount a USB flash drive) ++ Go into "File systems --->" ++ Enable "DOS FAT fs support" ++ Enable "VFAT (Windows-95) fs support" +diff --git a/Documentation/arm/ep93xx/dma.txt b/Documentation/arm/ep93xx/dma.txt +new file mode 100644 +index 0000000..e7fc1bb +--- /dev/null ++++ b/Documentation/arm/ep93xx/dma.txt +@@ -0,0 +1,300 @@ ++Support Functions for the Cirrus Logic ep93xx Internal DMA controller. ++============================================================================== ++ ++State diagram ++ ++States: ++Uninitialized (!pause & !xfer_enable) ++Stopped (pause & !xfer_enable) ++Transferring (!pause & xfer_enable) ++Stopped by starvation (pause & xfer_enable) ++ ++ _______________ ++ request ----------> | | <------- free ----------- ++ | Uninitialized | /\ ++ |_______________| || ++ || ++ || || ++ init || ------------------------------>|| ++ || /\ || ++ \/ || || ++ _________ || ++ ||<-- start && new_buffers <= 1 -- | | <----- flush <--------- || ++ || | Stopped | /\ || ++ || ---------> pause------> |_________| -------------------->|| || ++ || /\ || ++ || || || || ++ || || || start && new_buffers > 1 || ++ || || || || ++ || || \/ || ++ || || ______________ || ++ || || | | ------------------------->|| ++ || ||<---------------- | Transferring | ------------------->|| || ++ || || |______________| || || ++ || || || || ++ || || || || || ++ || || || new_buffers = 0 || || ++ || || /\ || || || ++ || || || \/ || || ++ || || new_buffers > 1 || || || ++ || || || || || ++ || || _______________________ || || ++ || ||<-------------- | | || || ++ \/ | Stopped by starvation | ------------>|| || ++ ---------------------------> |_______________________| || || ++ || || ++ || /\ || || ++ || || || || ++ || ||<-------- flush <--------------- || ++ || || ++ ------------------------------------------->|| ++ ++ ++------------------------------------------------------------------------------ ++EP93XX DMA API Functions ++------------------------------------------------------------------------------ ++ ++ int ep93xx_dma_request(int * handle, const char * device_id, ++ ep93xx_dma_dev_t device) ++ ++This function will allocate a DMA channel for a particular hardware ++peripheral. Before initiating a transfer on the allocated channel, the ++channel has to be setup, and buffers have to be added to the channel. ++ ++Parameters: ++ int * handle A pointer which is filled in with a unique ++ integer value, or handle. The handle is used ++ to verify the validity of each call to ++ access the dma channel. ++ ++ const char * device_id string which is the name of the device ++ attached to the dma channel. ++ ++ ep93xx_dma_dev_t device hardware port to attach to the dma channel ++ ++------------------------------------------------------------------------------ ++ ++ int ep93xx_dma_free(int handle) ++ ++This function disables and powers down the dma channel, and releases it ++for future requests. Buffers queued up for the specified channel are ++released without transferring. ++ ++Parameters: ++ int handle A unique integer value, assigned ++ during open, used to verify the validity of ++ this call to access a DMA channel. ++ ++------------------------------------------------------------------------------ ++ ++ int ep93xx_dma_add_buffer(int handle, unsigned int source, ++ unsigned int dest, unsigned int size ++ unsigned int last, unsigned int buf_id) ++ ++This function adds a buffer entry to the DMA buffer queue. If the channel is ++in the active transfer state, the buffer is immediately transferred, ++otherwise the buffer is not transferred until a start or resume ++command is issued. A -1 is returned if an error occurs, otherwise ++a 0 is returned. ++ ++Parameter: ++ int handle A unique integer value, assigned ++ during open, used to verify the validity of ++ this call to access a dma channel. ++ ++ unsigned int source physical address for the start of this ++ buffer. ++ ++ unsigned int source physical address destination of the data. ++ ++ unsigned int size buffer size in bytes ++ ++ unsigned int last 1 if this is the last buffer in the transfer. ++ If 1, disable the NFBint so we aren't ++ interrupted for another buffer ++ when we know there won't be another. ++ ++ unsigned int buf_id Unique value used to identify this buffer. ++ ++------------------------------------------------------------------------------ ++ ++ int ep93xx_dma_remove_buffer(int handle, unsigned int * address, ++ unsigned int * size) ++ ++This function removes a buffer entry from the DMA buffer queue. If a buffer ++was removed successfully, a 0 is returned, otherwise -1 is returned. ++ ++Parameter: ++ int handle A unique integer value, assigned ++ during open, used to verify the validity of ++ this call to access a dma channel. ++ ++ unsigned int * buf_id Pointer to an integer which is filled in ++ with the buffer id.. ++ ++------------------------------------------------------------------------------ ++ ++ int ep93xx_dma_queue_full(int handle) ++ ++This function queries to determine if the buffer queue for the specified ++channel is full. A return value of 1 indicates the queue is not full, and a ++0 indicates the queue is full. ++ ++Parameters: ++ int handle A unique integer value, assigned ++ during open, used to verify the validity of ++ this call to access a dma channel. ++ ++------------------------------------------------------------------------------ ++ ++ int ep93xx_dma_get_position(int handle, unsigned int * buf_id, ++ unsigned int * total) ++ ++This function fills in the buffer ID of the current buffer and fills in the ++total bytes transferred on the channel. If no buffer is active on the channel, ++buf_id is filled in with a -1, otherwise it is the active buffer. ++ ++Parameter: ++ int handle A unique integer value, assigned ++ during open, used to verify the validity of ++ this call to access a dma channel. ++ ++ unsigned int * buf_id pointer to an integer which is filled in with ++ buffer ID of the buffer currently ++ transferring. ++ ++ unsigned int * total pointer to an integer which is filled in ++ with the total bytes transferred on the channel. ++ ++------------------------------------------------------------------------------ ++ ++ int ep93xx_dma_config(int handle, unsigned int flags_m2m, ++ unsigned int flags_m2p, dma_callback callback, ++ unsigned int user_data) ++ ++This function configures the DMA channel registers and installs a dma ++callback function into the DMA instance. The DMA callback function is ++defined by the driver which is using this DMA channel. It is called in ++response to DMA interrupts, at the end of the DMA channel's interrupt ++handler. A -1 is returned if an error occurs, otherwise a 0 is returned. ++ ++Parameter: ++ int handle A unique integer value, assigned ++ during open, used to verify the validity of ++ this call to access a dma channel. ++ ++ unsigned int flags_m2m Flags used for M2M channel configuration. ++ ++ unsigned int flags_m2p Flags used for M2P/P2M channel ++ configuration. ++ ++ dma_callback callback Pointer to the callback function which will ++ be called at the end of the dma interrupt ++ service routine. ++ ++ unsigned int user_data Data defined by the driver installing the ++ callback function. This piece of data will ++ be returned to the driver when the callback ++ function is called. ++ ++Callback function prototype: ++ ++ void (* dma_callback)(ep93xx_dma_int_t interrupt, ++ ep93xx_dma_dev_t device, unsigned int user_data) ++ ++ Parameters: ++ ep93xx_dma_int_t interrupt ++ used by the DMA driver to inform the DMA callback ++ function of the type of DMA interrupt that happened. ++ ++ ep93xx_dma_dev_t device ++ hardware port attached to the dma channel. ++ ++ unsigned int user_data ++ is a value defined and passed in by the driver which ++ registered the callback function. ++ ++------------------------------------------------------------------------------ ++ ++ int ep93xx_dma_start(int handle, unsigned int channels, ++ unsigned int * handles ++ ++This function enables the DMA channel, and initiates the transfer. If the ++peripheral interface calls for it, multiple DMA channels can be started ++with one call to this IOCTL. A -1 is returned if an error occurs, ++otherwise a 0 is returned. ++ ++Parameter: ++ int handle A unique integer value, assigned ++ during open, used to verify the validity of ++ this call to access a dma channel. For a start ++ multiple, this handle can be the handle ++ for any of the channels to be started. ++ ++ unsigned int channels Number of channels to start for this transfer. ++ Specifically this applies to an audio interface ++ where you can have up to 3 dma channels ++ servicing a 6 audio channel output, in which case ++ you need to initiate transfers on all 3 dma ++ channels as closely together as possible. For ++ the case of only one channel to be started, this ++ field should be a 1. ++ ++ unsigned int * handles Pointer to an array of handles, one for ++ each channel which is to be started. If only one ++ channel is to be started, this field should be ++ NULL. ++ ++------------------------------------------------------------------------------ ++ ++ int ep93xx_dma_pause(int handle, unsigned int channels, ++ unsigned int * handles) ++ ++This function disables the DMA channel, pausing the transfer. The ++position within the currently transferring buffer is saved, and restored upon ++restarting the transfer on this channel. If the peripheral interface calls ++for it, multiple DMA channels can be paused with one call to this IOCTL. ++A -1 is returned if an error occurs, otherwise a 0 is returned. ++ ++Parameter: ++ int handle A unique integer value, assigned ++ during open, used to verify the validity of ++ this call to access a dma channel. ++ ++ unsigned int channels Number of channels to pause for this ++ transfer. Specifically this applies to ++ an audio interface where you can have ++ up to 3 dma channels servicing a 6 ++ audio channel output, in which case you ++ need to pause transfers on all 3 dma ++ channels as closely together as possible. ++ ++ unsigned int * handles Pointer to an array of handles, one for ++ each channel which is to be paused. ++ ++NOTE: There is another way to pause the DMA channel - starve it. ++When the dma channel reaches the point where there are no buffers in ++the queue, but the interface has not been paused, then the dma instance ++will indicate that the channel is in the transfer state, but the ++channel itself is disabled until a new buffer is added to the queue ++If the channel is stopped via this method, a resume command is not ++required to restart a transfer. A transfer is started immediately ++after two new buffers are added to the queue. The reason for two is ++so that both channel buffer descriptors can be programmed with valid ++buffers ++ ++------------------------------------------------------------------------------ ++ ++ int ep93xx_dma_flush(int handle) ++ ++This function completely flushes all queued buffers and any on going ++DMA transfers on a given channel. If the dma channel is in the ++active transfer state, once two buffers are added to the queue, the ++channel will begin transferring data right away. If in the stop ++state, a start command must be issued before any new buffers are ++processed. A -1 is returned if an error occurs, otherwise a 0 is returned. ++ ++Parameters: ++ int handle A unique integer value, assigned ++ during open, used to verify the validity of ++ this call to access a dma channel. +diff --git a/Documentation/arm/ep93xx/status.txt b/Documentation/arm/ep93xx/status.txt +new file mode 100644 +index 0000000..082c2dd +--- /dev/null ++++ b/Documentation/arm/ep93xx/status.txt +@@ -0,0 +1,288 @@ ++# ++# EP93xx driver support status ++# ++ ++====================================================================== ++(I) Introduction ++====================================================================== ++ ++The EP93xx are embedded System On Chip (SOC) processors produced ++by Cirrus (www.cirrus.com). They provided support based on 2.4.21-rmk1 ++kernels, and they said that there might be 2.6.x support some day. ++Meanwhile they've released a 2.6.8.1 based kernel called "ursus". ++ ++Currently we still have got a communication problem with cirrus, ++for some reason it seems to be impossible to directly talk to their ++developers. Hope this will change some day, but we really cannot afford ++to just sit down and wait. ++ ++The purpose of this file is to document success and todo's. ++ ++ - Section II describes hardware support, organized according to the ++ EP9315 datasheet. Other device datasheets are ordered similarly, ++ though section numbers may vary. ++ ++ - Section III contains other miscellaneous information. ++ ++The latest version of this document may be found at: ++ ++ linux/Documentation/arm/ep93xx/status.txt ++ ++projects homepage can be found at: ++ ++ http://members.inode.at/m.burian/ep93xx/index.html ++ ++ ++====================================================================== ++(II) Hardware Support ++====================================================================== ++ ++These section numbers mirror the EP9315 datasheet. ++ ++1. Introduction ++--------------- ++N/A ++ ++2. ARM920T Core and Advanced High-Speed Bus (AHB) ++------------------------------------------------- ++We have standard Linux 2.6 support for ARM920T Core. Thumb support ++is pretty shaky, as most people do not seem to use Thumb in the ++kernel. Address translation uses 16K small pages exclusively (FIXME: ++is this true?) ++ ++3. MaverickCrunch Coprocessor ++----------------------------- ++People have started with forward porting. Note that there's more ++to it than just kernel support. You also need to have a toolchain ++supporting it. We're in need of a comprehensive HOWTO that explains kernel, ++toolchain and userspace aspects to a point where average developers can use it ++ ++ ++4. Boot ROM ++----------- ++Well, not really kernel related, most people start with redboot. Make ++sure to use a version that passes the correct machine type. Some ++people also started porting blob / uboot. ++ ++If any support is added for this device, it will likely be a simple ++char device that allows you to read the contents of the boot rom ++for interests sake. ++ ++5. System Controller ++-------------------- ++System Controllers registers are set by startup code and by individual ++drivers as needed, we try to keep the processor dependent stuff to ++a minimum. ++ ++Ray really wants to overhaul the system configuration stuff and move ++towards something like the SA1100 people are doing. It should make ++things a lot cleaner for drivers that share physical pins, or for ++multifunctional blocks that require several drivers (eg: UART2 with ++IrDA support) ++ ++There is currently no dynamic clock control support. We'll probably ++want to tie into the CPUfreq code at some point. ++ ++There is no support for querying the system boot configuration or ++last reset source. ++ ++There is no power management support. Individual drivers may power ++up silicon blocks as required. Some research is needed to map the ++EP93xx power states onto the ACPI or PCI states that everyone seems ++to use. ++ ++There is no support for the TICK and WATCHDOGEXPIRED interrupts ++generated by this block. ++ ++There is no support for the AHB bus arbiter priority settings. ++ ++6. Vectored Interrupt Controller ++-------------------------------- ++Since we can boot this can't be done dead wrong. Standard level-triggered ++interrupt support is present. ++ ++No FIQ interrupts are supported. ++ ++Support for demultiplexing GPIO IRQs is available. ++ ++ ++7. Raster Engine With Analog/LCD Integrated Timing and Interface ++---------------------------------------------------------------- ++ ++Michael has rewritten large parts of the framebuffer driver based on ++skeleton.c. You need to adapt this in case you can't live with ++the standard display(s) that are included. Framebuffer is fixed ++size, you can change some settings at compile time, though. ++TODO: clean ups, different resolutions, etc ++ ++ ++8. Graphics Accelerator ++----------------------- ++not available yet, will be done after the framebuffer code has been ++cleaned up. ++ ++ ++9. 1/10/100 Mbps Ethernet LAN Controller ++---------------------------------------- ++Supported. Driver has been reviewed and cleaned up. ++Uses generic mii routines now. It might be possible ++to use DMA - but in that case we'd need to find a ++workaround to get around the fact that it can only ++transfer 32bit aligned data, while we'd need to transfer ++data that's only 16 bit aligned. ++ ++NICE-TO-HAVE: Could be ported to use NAPI. ++ ++10. DMA Controller ++------------------ ++There is some code and documentation ported forward from the Cirrus ++2.4 port. ++ ++11. Universal Serial Bus Host Controller ++---------------------------------------- ++Ray has written some glue code to plug the OHCI host controller into ++the Linux 2.6 USB stack. This has been tested on an EDB9301 board with ++a single port populated. A serial dongle worked fine, and several ++different flash keys seem to work okay with the USB mass storage ++driver using SCSI disk emulation. This hasn't really been stress tested ++yet, but initial results look very encouraging. ++ ++12. Static Memory Controller ++---------------------------- ++Not sure how much kernel support is required here. Flash and memory ++timing needs to be setup by the bootloader, so there's not much ++that needs to be done here. ++ ++No support for PCMCIA at this time. ++ ++13. SDRAM, SyncROM, and SyncFLASH Controller ++-------------------------------------------- ++Again, this is probably the bootloaders problem. ++ ++There is an errata about system instability when suspending with ++an SDRAM bus speed over 50 MHz. May need to tweak this if we start ++doing power management modes. ++ ++14. UART1 With HDLC and Modem Control Signals ++--------------------------------------------- ++We've got a driver to use this one as UART. No DMA support. FIFO support ++works. No HDLC support. Needs some syscon support to cleanly handle ++HDLC and some modem signals. ++ ++15. UART2 ++--------- ++We've got a driver to use this one as UART. No DMA support. FIFO support ++works. No IrDA SIR support. Needs some syscon support to cleanly handle ++IrDA SIR. ++ ++16. UART3 With HDLC Encoder ++--------------------------- ++We've got a driver to use this one as UART. No DMA support. FIFO support ++works. No HDLC or RS-485 support. Needs some syscon support to cleanly ++handle HDLC and RS-485. ++ ++17. IRDA ++-------- ++There is some code and documentation ported forward from the Cirrus ++2.4 port. No idea how well this works, if at all. ++ ++18. TIMERS ++---------- ++Timer1 is used at 508 kHz with a reload value of 5080 to provide a 100 Hz ++tick signal to drive the kernel. ++ ++Timer 2 and 3 are not currently used, nor is the debug timer 4. ++ ++ ++19. WATCHDOG Timer ++------------------ ++Ray has some initial experimental code written (not pushed) to drive this. ++The onboard watchdog seems to have a 250 ms (!) timeout, while most PC ++dogs seem to have timeouts on the order of one minute or more. The standard ++approach of having a user level process open the watchdog device and ++kick it every so often seems like a bad idea here... a momentary system ++load spike could easily delay the monitor from being scheduled, and the ++system would reboot. ++ ++Test out a watchdog monitor running at a high scheduling priority, or else ++design a kernel watchdog that kicks the dog every timer tick and exports ++a more reasonable timeout value to userspace. ++ ++20. Real Time Clock With Software Trim ++-------------------------------------- ++We did not bother to write a driver yet, it would require a design ++that ensures CPU is always powered on, and always have at least ++a 32kHz clock running. Most people prefer to use and external RTC. ++We've got support for the DS1337 RTC that seems to be popular on ++ep93xx based boards. ++ ++21. I2S Controller ++------------------ ++No support yet. Klaus is working on it. ++ ++22. AC97 Controller ++------------------- ++Supported but could need some testing. ++ ++23. Synchronous Serial Port ++--------------------------- ++Two driver are available, a forward port from the cirrus driver and ++another driver from Ray. ++ ++24. Pulse Width Modulator ++------------------------- ++No support yet. ++ ++25. Analog Touch Screen Interface ++--------------------------------- ++People already played with this, AFAIK one would need a silicon ++revision > D1 (November 2004) for this to work properly. ++ ++26. Keypad Interface ++-------------------- ++We've got a driver for the 8x8 keypad. Chances are that you might ++want to create a custom keymap. There's also support for mobile ++phone like input (key 1 becomes -> A -> B -> C) if pressed repeatedly ++within half a second. ++ ++27. IDE interface ++----------------- ++We've got IDE working in polling only, no DMA support so far. ++It needs to be cleaned up, too. ++ ++28. GPIO ++-------- ++Standard LED support for red and green leds is present. ++ ++Michael has written an I2C bus driver using the new Linux device driver model. ++It supports an external DS1337 RTC device on the EECLK/EEDAT pins. ++ ++Need some syscon support to cleanly handle the multi-function GPIO pins. ++ ++Demultiplexing of GPIO interrupts is possible now. ++ ++29. Security ++------------ ++No information available on this, so support is unlikely in the near future. ++ ++30. Glossary ++------------ ++N/A ++ ++ ++====================================================================== ++(III) Stuff not found in the datasheet ++====================================================================== ++ ++1. printascii hack has been removed from our tree. ++ ++2. I2C driver ++We've got a bit banging I2C driver ++ ++3. External RTC (DS1337) ++Setting and getting the time works ++TODO: advanced features, such as alarm, timer for /dev/rtc ++ ++4. Controller Area Network (CAN) ++We have got a character device based driver for the OKI ML9620 CAN Controller. ++ +diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig +index 4b15f5f..f23341e 100644 +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -103,6 +103,17 @@ config ARCH_EBSA110 + Ethernet interface, two PCMCIA sockets, two serial ports and a + parallel port. + ++config ARCH_EP93XX ++ bool "EP93xx" ++ select ARM_AMBA ++ help ++ Say Y here to enable support for the Cirrus EP93xx CPU family ++ and choose your specific CPU below. ++ ++ See the Cirrus web page for details. ++ ++ ++ + config ARCH_CAMELOT + bool "Epxa10db" + help +@@ -219,6 +230,8 @@ endchoice + + source "arch/arm/mach-clps711x/Kconfig" + ++source "arch/arm/mach-ep93xx/Kconfig" ++ + source "arch/arm/mach-epxa10db/Kconfig" + + source "arch/arm/mach-footbridge/Kconfig" +@@ -403,7 +416,7 @@ config NO_IDLE_HZ + + config ARCH_DISCONTIGMEM_ENABLE + bool +- default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM) ++ default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM) || ARCH_EP93XX + help + Say Y to support efficient handling of discontiguous physical memory, + for architectures which are either NUMA (Non-Uniform Memory Access) +@@ -415,7 +428,7 @@ source "mm/Kconfig" + config LEDS + bool "Timer and CPU usage LEDs" + depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \ +- ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ ++ ARCH_EBSA285 || ARCH_EP93XX || ARCH_IMX || ARCH_INTEGRATOR || \ + ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ + ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ + ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE +@@ -432,7 +445,7 @@ config LEDS + + config LEDS_TIMER + bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \ +- MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 ++ MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 + depends on LEDS + default y if ARCH_EBSA110 + help +@@ -702,9 +715,10 @@ source "drivers/block/Kconfig" + + source "drivers/acorn/block/Kconfig" + +-if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ +- || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ +- || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE ++if PCMCIA || ARCH_CLPS7500 || ARCH_EP9312 || ARCH_EP9315 \ ++ || ARCH_IOP3XX || ARCH_IXP4XX || ARCH_L7200 || ARCH_LH7A40X \ ++ || ARCH_PXA || ARCH_RPC || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK \ ++ || FOOTBRIDGE + source "drivers/ide/Kconfig" + endif + +diff --git a/arch/arm/Makefile b/arch/arm/Makefile +index 81bd219..924d31f 100644 +--- a/arch/arm/Makefile ++++ b/arch/arm/Makefile +@@ -92,6 +92,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0x + machine-$(CONFIG_ARCH_IOP3XX) := iop3xx + machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx + machine-$(CONFIG_ARCH_IXP2000) := ixp2000 ++ machine-$(CONFIG_ARCH_EP93XX) := ep93xx + machine-$(CONFIG_ARCH_OMAP1) := omap1 + machine-$(CONFIG_ARCH_OMAP2) := omap2 + incdir-$(CONFIG_ARCH_OMAP) := omap +diff --git a/arch/arm/configs/adssphere_defconfig b/arch/arm/configs/adssphere_defconfig +new file mode 100644 +index 0000000..195d80e +--- /dev/null ++++ b/arch/arm/configs/adssphere_defconfig +@@ -0,0 +1,1240 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.12.2 ++# Wed Jul 6 13:49:08 2005 ++# ++CONFIG_ARM=y ++CONFIG_MMU=y ++CONFIG_UID16=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_IOMAP=y ++ ++# ++# Code maturity level options ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_CLEAN_COMPILE=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++ ++# ++# General setup ++# ++CONFIG_LOCALVERSION="" ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++CONFIG_SYSCTL=y ++# CONFIG_AUDIT is not set ++CONFIG_HOTPLUG=y ++CONFIG_KOBJECT_UEVENT=y ++# CONFIG_IKCONFIG is not set ++# CONFIG_EMBEDDED is not set ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_EPOLL=y ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SHMEM=y ++CONFIG_CC_ALIGN_FUNCTIONS=0 ++CONFIG_CC_ALIGN_LABELS=0 ++CONFIG_CC_ALIGN_LOOPS=0 ++CONFIG_CC_ALIGN_JUMPS=0 ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++ ++# ++# Loadable module support ++# ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++CONFIG_OBSOLETE_MODPARM=y ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++# CONFIG_KMOD is not set ++ ++# ++# System Type ++# ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_CO285 is not set ++# CONFIG_ARCH_EBSA110 is not set ++CONFIG_ARCH_EP93XX=y ++# CONFIG_ARCH_CAMELOT is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_IOP3XX is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_OMAP is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_H720X is not set ++ ++# ++# EP93xx ++# ++# CONFIG_ARCH_EP9301 is not set ++# CONFIG_ARCH_EP9302 is not set ++# CONFIG_ARCH_EP9312 is not set ++CONFIG_ARCH_EP9315=y ++# CONFIG_MACH_EDB9315 is not set ++CONFIG_MACH_ADSSPHERE=y ++# CONFIG_MACH_ZEFEERDZQ is not set ++CONFIG_EP93XX_DMA=y ++# CONFIG_ARCH_EP93XX_IDE is not set ++# CONFIG_EP93XX_SSP is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_ARM920T=y ++CONFIG_CPU_32v4=y ++CONFIG_CPU_ABRT_EV4T=y ++CONFIG_CPU_CACHE_V4WT=y ++CONFIG_CPU_CACHE_VIVT=y ++CONFIG_CPU_COPY_V4WB=y ++CONFIG_CPU_TLB_V4WBI=y ++ ++# ++# Processor Features ++# ++# CONFIG_ARM_THUMB is not set ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set ++ ++# ++# Bus support ++# ++CONFIG_ARM_AMBA=y ++CONFIG_ISA_DMA_API=y ++ ++# ++# PCCARD (PCMCIA/CardBus) support ++# ++CONFIG_PCCARD=y ++# CONFIG_PCMCIA_DEBUG is not set ++CONFIG_PCMCIA=y ++ ++# ++# PC-card bridges ++# ++# CONFIG_TCIC is not set ++CONFIG_PCMCIA_EP93XX=y ++ ++# ++# Kernel Features ++# ++# CONFIG_SMP is not set ++# CONFIG_PREEMPT is not set ++CONFIG_DISCONTIGMEM=y ++CONFIG_LEDS=y ++CONFIG_LEDS_TIMER=y ++# CONFIG_LEDS_CPU is not set ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="console=ttyAM0,38400 rw root=/dev/ram initrd=0x00600000,5m ramdisk_size=12288 rootfstype=ext2 mtdparts=flash:256k(boot),256k(bootvars),1536k(zImage),5m(ramdisk.gz),-(flashfs1) SERIALGETTY=ttyAM0 SERIALBAUD=38400" ++# CONFIG_XIP_KERNEL is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++CONFIG_FPE_NWFPE=y ++# CONFIG_FPE_NWFPE_XP is not set ++# CONFIG_FPE_FASTFPE is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++# CONFIG_ARTHUR is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++# CONFIG_DEBUG_DRIVER is not set ++ ++# ++# Memory Technology Devices (MTD) ++# ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++# CONFIG_MTD_CONCAT is not set ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++CONFIG_MTD_CFI=y ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_GEN_PROBE=y ++CONFIG_MTD_CFI_ADV_OPTIONS=y ++CONFIG_MTD_CFI_NOSWAP=y ++# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set ++# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set ++CONFIG_MTD_CFI_GEOMETRY=y ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++CONFIG_MTD_CFI_INTELEXT=y ++# CONFIG_MTD_CFI_AMDSTD is not set ++# CONFIG_MTD_CFI_STAA is not set ++CONFIG_MTD_CFI_UTIL=y ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++# CONFIG_MTD_XIP is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PHYSMAP is not set ++CONFIG_MTD_ADSFLASH=y ++# CONFIG_MTD_ARM_INTEGRATOR is not set ++# CONFIG_MTD_EDB7312 is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLKMTD is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++ ++# ++# NAND Flash Device Drivers ++# ++# CONFIG_MTD_NAND is not set ++ ++# ++# Parallel port support ++# ++# CONFIG_PARPORT is not set ++ ++# ++# Plug and Play support ++# ++ ++# ++# Block devices ++# ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_UB is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=4096 ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++# CONFIG_CDROM_PKTCDVD is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_ATA_OVER_ETH is not set ++ ++# ++# ATA/ATAPI/MFM/RLL support ++# ++CONFIG_IDE=y ++CONFIG_BLK_DEV_IDE=y ++ ++# ++# Please see Documentation/ide.txt for help/info on IDE drives ++# ++# CONFIG_BLK_DEV_IDE_SATA is not set ++CONFIG_BLK_DEV_IDEDISK=y ++# CONFIG_IDEDISK_MULTI_MODE is not set ++CONFIG_BLK_DEV_IDECS=y ++# CONFIG_BLK_DEV_IDECD is not set ++# CONFIG_BLK_DEV_IDETAPE is not set ++# CONFIG_BLK_DEV_IDEFLOPPY is not set ++# CONFIG_BLK_DEV_IDESCSI is not set ++# CONFIG_IDE_TASK_IOCTL is not set ++ ++# ++# IDE chipset support/bugfixes ++# ++CONFIG_IDE_GENERIC=y ++CONFIG_BLK_DEV_EP93XX=y ++# CONFIG_BLK_DEV_IDEDMA_EP93XX is not set ++CONFIG_IDE_ARM=y ++# CONFIG_BLK_DEV_IDEDMA is not set ++# CONFIG_IDEDMA_AUTO is not set ++# CONFIG_BLK_DEV_HD is not set ++ ++# ++# SCSI device support ++# ++CONFIG_SCSI=y ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++CONFIG_CHR_DEV_SG=y ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multip