From 93b27f854023c15efdf859764dfecf1ac71c84e3 Mon Sep 17 00:00:00 2001 From: Oyvind Repvik Date: Tue, 10 Apr 2007 19:24:34 +0000 Subject: u-boot: Add linkstation-patches --- .../kurobox_powerpc-20061105_target.gitdiff | 2286 ++++++++++++++++++++ 1 file changed, 2286 insertions(+) create mode 100644 packages/uboot/u-boot-1.2.0/kurobox_powerpc-20061105_target.gitdiff (limited to 'packages/uboot/u-boot-1.2.0/kurobox_powerpc-20061105_target.gitdiff') diff --git a/packages/uboot/u-boot-1.2.0/kurobox_powerpc-20061105_target.gitdiff b/packages/uboot/u-boot-1.2.0/kurobox_powerpc-20061105_target.gitdiff new file mode 100644 index 0000000000..02027b1062 --- /dev/null +++ b/packages/uboot/u-boot-1.2.0/kurobox_powerpc-20061105_target.gitdiff @@ -0,0 +1,2286 @@ +diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts +new file mode 100644 +index 0000000..6c76ef6 +--- /dev/null ++++ b/arch/powerpc/boot/dts/kuroboxHG.dts +@@ -0,0 +1,183 @@ ++/* ++ * Device Tree Souce for Buffalo KuroboxHG ++ * ++ * Based on sandpoint.dts ++ * ++ * 2006 (c) G. Liakhovetski ++ * ++ * This file is licensed under ++ * the terms of the GNU General Public License version 2. This program ++ * is licensed "as is" without any warranty of any kind, whether express ++ * or implied. ++ ++XXXX add flash parts, rtc, ?? ++ ++build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" ++ ++ ++ */ ++ ++/ { ++ linux,phandle = <1000>; ++ model = "KuroboxHG"; ++ compatible = "linkstation"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ cpus { ++ linux,phandle = <2000>; ++ #cpus = <1>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ PowerPC,603e { /* Really 8241 */ ++ linux,phandle = <2100>; ++ linux,boot-cpu; ++ device_type = "cpu"; ++ reg = <0>; ++ clock-frequency = ; /* Fixed by bootwrapper */ ++ timebase-frequency = <1F04000>; /* Fixed by bootwrapper */ ++ bus-frequency = <0>; /* From bootloader */ ++ /* Following required by dtc but not used */ ++ i-cache-line-size = <0>; ++ d-cache-line-size = <0>; ++ i-cache-size = <4000>; ++ d-cache-size = <4000>; ++ }; ++ }; ++ ++ memory { ++ linux,phandle = <3000>; ++ device_type = "memory"; ++ reg = <00000000 08000000>; ++ }; ++ ++ soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ ++ linux,phandle = <4000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ #interrupt-cells = <2>; ++ device_type = "soc"; ++ compatible = "mpc10x"; ++ store-gathering = <0>; /* 0 == off, !0 == on */ ++ reg = <80000000 00100000>; ++ ranges = <80000000 80000000 70000000 /* pci mem space */ ++ fc000000 fc000000 00100000 /* EUMB */ ++ fe000000 fe000000 00c00000 /* pci i/o space */ ++ fec00000 fec00000 00300000 /* pci cfg regs */ ++ fef00000 fef00000 00100000>; /* pci iack */ ++ ++ dma@80001100 { ++ linux,phandle = <4100>; ++ #interrupt-cells = <1>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ device_type = "dma"; ++ compatible = "fsl-dma"; ++ clock-frequency = <0>; ++ reg = <80001100 24>; ++ interrupts = <6 0>; ++ interrupt-parent = <4400>; ++ }; ++ ++ dma@80001200 { ++ linux,phandle = <4200>; ++ #interrupt-cells = <1>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ device_type = "dma"; ++ compatible = "fsl-dma"; ++ clock-frequency = <0>; ++ reg = <80001200 24>; ++ interrupts = <7 0>; ++ interrupt-parent = <4400>; ++ }; ++ ++ i2c@80003000 { ++ linux,phandle = <4300>; ++ device_type = "i2c"; ++ compatible = "fsl-i2c"; ++ clock-frequency = <0>; ++ reg = <80003000 1000>; ++ interrupts = <5 2>; ++ interrupt-parent = <4400>; ++ }; ++ ++ serial@80004500 { ++ linux,phandle = <4511>; ++ device_type = "serial"; ++ compatible = "ns16550"; ++ reg = <80004500 8>; ++ clock-frequency = <7c044a8>; ++ current-speed = <2580>; ++ interrupts = <9 2>; ++ interrupt-parent = <4400>; ++ }; ++ ++ serial@80004600 { ++ linux,phandle = <4512>; ++ device_type = "serial"; ++ compatible = "ns16550"; ++ reg = <80004600 8>; ++ clock-frequency = <7c044a8>; ++ current-speed = ; ++ interrupts = ; ++ interrupt-parent = <4400>; ++ }; ++ ++ pic@80040000 { ++ linux,phandle = <4400>; ++ #interrupt-cells = <2>; ++ #address-cells = <0>; ++ device_type = "open-pic"; ++ compatible = "chrp,open-pic"; ++ interrupt-controller; ++ reg = <80040000 40000>; ++ clock-frequency = <0>; /* ??? */ ++ built-in; ++ }; ++ ++ pci@fec00000 { ++ linux,phandle = <4500>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ device_type = "pci"; ++ compatible = "mpc10x-pci"; ++ reg = ; ++ ranges = <01000000 0 0 fe000000 0 00c00000 ++ 02000000 0 80000000 80000000 0 70000000>; ++ bus-range = <0 ff>; ++ clock-frequency = <7f28155>; ++ interrupt-parent = <4400>; ++ interrupt-map-mask = ; ++ interrupt-map = < ++ /* IDSEL 0x11 - IRQ0 ETH */ ++ 5800 0 0 1 4400 0 1 ++ 5800 0 0 2 4400 1 1 ++ 5800 0 0 3 4400 2 1 ++ 5800 0 0 4 4400 3 1 ++ /* IDSEL 0x12 - IRQ1 IDE0 */ ++ 6000 0 0 1 4400 1 1 ++ 6000 0 0 2 4400 2 1 ++ 6000 0 0 3 4400 3 1 ++ 6000 0 0 4 4400 0 1 ++ /* IDSEL 0x13 - IRQ4 IDE1 */ ++ 6800 0 0 1 4400 3 1 ++ 6800 0 0 2 4400 0 1 ++ 6800 0 0 3 4400 1 1 ++ 6800 0 0 4 4400 2 1 ++ /* IDSEL 0x14 - IRQ3 USB2.0 */ ++ 7000 0 0 1 4400 3 1 ++ 7000 0 0 2 4400 3 1 ++ 7000 0 0 3 4400 3 1 ++ 7000 0 0 4 4400 3 1 ++ /* IDSEL 0x15 - IRQ2 fan ctrl*/ ++ 7800 0 0 1 4400 2 1 ++ 7800 0 0 2 4400 3 1 ++ 7800 0 0 3 4400 0 1 ++ 7800 0 0 4 4400 1 1 ++ >; ++ }; ++ }; ++}; +diff --git a/arch/powerpc/configs/kuroboxhg_defconfig b/arch/powerpc/configs/kuroboxhg_defconfig +new file mode 100644 +index 0000000..136632f +--- /dev/null ++++ b/arch/powerpc/configs/kuroboxhg_defconfig +@@ -0,0 +1,1577 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.19-rc2 ++# Wed Nov 1 16:56:07 2006 ++# ++# CONFIG_PPC64 is not set ++CONFIG_PPC32=y ++CONFIG_PPC_MERGE=y ++CONFIG_MMU=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_IRQ_PER_CPU=y ++CONFIG_RWSEM_XCHGADD_ALGORITHM=y ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_FIND_NEXT_BIT=y ++CONFIG_PPC=y ++CONFIG_EARLY_PRINTK=y ++CONFIG_GENERIC_NVRAM=y ++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y ++CONFIG_ARCH_MAY_HAVE_PC_FDC=y ++CONFIG_PPC_OF=y ++CONFIG_PPC_UDBG_16550=y ++# CONFIG_GENERIC_TBSYNC is not set ++CONFIG_AUDIT_ARCH=y ++# CONFIG_DEFAULT_UIMAGE is not set ++ ++# ++# Processor support ++# ++CONFIG_CLASSIC32=y ++# CONFIG_PPC_52xx is not set ++# CONFIG_PPC_82xx is not set ++# CONFIG_PPC_83xx is not set ++# CONFIG_PPC_85xx is not set ++# CONFIG_PPC_86xx is not set ++# CONFIG_40x is not set ++# CONFIG_44x is not set ++# CONFIG_8xx is not set ++# CONFIG_E200 is not set ++CONFIG_6xx=y ++CONFIG_PPC_FPU=y ++# CONFIG_ALTIVEC is not set ++CONFIG_PPC_STD_MMU=y ++CONFIG_PPC_STD_MMU_32=y ++# CONFIG_SMP is not set ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# Code maturity level options ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++ ++# ++# General setup ++# ++CONFIG_LOCALVERSION="-kuroboxHG" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++# CONFIG_IPC_NS is not set ++CONFIG_POSIX_MQUEUE=y ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_UTS_NS is not set ++# CONFIG_AUDIT is not set ++CONFIG_IKCONFIG=y ++CONFIG_IKCONFIG_PROC=y ++# CONFIG_RELAY is not set ++CONFIG_INITRAMFS_SOURCE="" ++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++# CONFIG_SYSCTL_SYSCALL is not set ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_EPOLL=y ++CONFIG_SHMEM=y ++CONFIG_SLAB=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++# CONFIG_SLOB is not set ++ ++# ++# Loadable module support ++# ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++ ++# ++# Block layer ++# ++CONFIG_BLOCK=y ++# CONFIG_LBD is not set ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++CONFIG_DEFAULT_AS=y ++# CONFIG_DEFAULT_DEADLINE is not set ++# CONFIG_DEFAULT_CFQ is not set ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="anticipatory" ++ ++# ++# Platform support ++# ++# CONFIG_PPC_MULTIPLATFORM is not set ++CONFIG_EMBEDDED6xx=y ++# CONFIG_APUS is not set ++# CONFIG_PPC_CELL is not set ++# CONFIG_PPC_CELL_NATIVE is not set ++# CONFIG_PPC_RTAS is not set ++# CONFIG_MMIO_NVRAM is not set ++# CONFIG_PPC_MPC106 is not set ++# CONFIG_PPC_970_NAP is not set ++# CONFIG_CPU_FREQ is not set ++# CONFIG_TAU is not set ++# CONFIG_KATANA is not set ++# CONFIG_WILLOW is not set ++# CONFIG_CPCI690 is not set ++# CONFIG_POWERPMC250 is not set ++# CONFIG_CHESTNUT is not set ++# CONFIG_SPRUCE is not set ++# CONFIG_HDPU is not set ++# CONFIG_EV64260 is not set ++# CONFIG_LOPEC is not set ++# CONFIG_MVME5100 is not set ++# CONFIG_PPLUS is not set ++# CONFIG_PRPMC750 is not set ++# CONFIG_PRPMC800 is not set ++# CONFIG_SANDPOINT is not set ++CONFIG_LINKSTATION=y ++# CONFIG_MPC7448HPC2 is not set ++# CONFIG_RADSTONE_PPC7D is not set ++# CONFIG_PAL4 is not set ++# CONFIG_GEMINI is not set ++# CONFIG_EST8260 is not set ++# CONFIG_SBC82xx is not set ++# CONFIG_SBS8260 is not set ++# CONFIG_RPX8260 is not set ++# CONFIG_TQM8260 is not set ++# CONFIG_ADS8272 is not set ++# CONFIG_PQ2FADS is not set ++# CONFIG_LITE5200 is not set ++# CONFIG_EV64360 is not set ++CONFIG_PPC_GEN550=y ++CONFIG_MPC10X_BRIDGE=y ++CONFIG_MPC10X_OPENPIC=y ++# CONFIG_MPC10X_STORE_GATHERING is not set ++# CONFIG_WANT_EARLY_SERIAL is not set ++CONFIG_MPIC=y ++ ++# ++# Kernel options ++# ++# CONFIG_HIGHMEM is not set ++CONFIG_HZ_100=y ++# CONFIG_HZ_250 is not set ++# CONFIG_HZ_1000 is not set ++CONFIG_HZ=100 ++CONFIG_PREEMPT_NONE=y ++# CONFIG_PREEMPT_VOLUNTARY is not set ++# CONFIG_PREEMPT is not set ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_MISC is not set ++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y ++CONFIG_ARCH_FLATMEM_ENABLE=y ++CONFIG_ARCH_POPULATES_NODE_MAP=y ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++# CONFIG_SPARSEMEM_STATIC is not set ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++CONFIG_PROC_DEVICETREE=y ++CONFIG_CMDLINE_BOOL=y ++CONFIG_CMDLINE="console=ttyS1,57600 root=/dev/sdd1 netconsole=@192.168.1.7/eth0,@192.168.1.1/00:50:BF:A4:59:71 rtc-rs5c372.probe=0,0x32" ++# CONFIG_PM is not set ++# CONFIG_SECCOMP is not set ++CONFIG_ISA_DMA_API=y ++ ++# ++# Bus options ++# ++CONFIG_GENERIC_ISA_DMA=y ++# CONFIG_MPIC_WEIRD is not set ++# CONFIG_PPC_I8259 is not set ++CONFIG_PPC_INDIRECT_PCI=y ++CONFIG_FSL_SOC=y ++CONFIG_PCI=y ++CONFIG_PCI_DOMAINS=y ++# CONFIG_PCIEPORTBUS is not set ++# CONFIG_PCI_MULTITHREAD_PROBE is not set ++# CONFIG_PCI_DEBUG is not set ++ ++# ++# PCCARD (PCMCIA/CardBus) support ++# ++# CONFIG_PCCARD is not set ++ ++# ++# PCI Hotplug Support ++# ++# CONFIG_HOTPLUG_PCI is not set ++ ++# ++# Advanced setup ++# ++# CONFIG_ADVANCED_OPTIONS is not set ++ ++# ++# Default settings for advanced configuration options are used ++# ++CONFIG_HIGHMEM_START=0xfe000000 ++CONFIG_LOWMEM_SIZE=0x30000000 ++CONFIG_KERNEL_START=0xc0000000 ++CONFIG_TASK_SIZE=0x80000000 ++CONFIG_BOOT_LOAD=0x00800000 ++ ++# ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_NETDEBUG is not set ++CONFIG_PACKET=y ++CONFIG_PACKET_MMAP=y ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_BOOTP=y ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_IP_MROUTE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++ ++# ++# IP: Virtual Server Configuration ++# ++# CONFIG_IP_VS is not set ++# CONFIG_IPV6 is not set ++# CONFIG_INET6_XFRM_TUNNEL is not set ++# CONFIG_INET6_TUNNEL is not set ++# CONFIG_NETWORK_SECMARK is not set ++CONFIG_NETFILTER=y ++# CONFIG_NETFILTER_DEBUG is not set ++ ++# ++# Core Netfilter Configuration ++# ++# CONFIG_NETFILTER_NETLINK is not set ++CONFIG_NETFILTER_XTABLES=m ++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m ++# CONFIG_NETFILTER_XT_TARGET_DSCP is not set ++CONFIG_NETFILTER_XT_TARGET_MARK=m ++# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set ++# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set ++# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set ++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m ++# CONFIG_NETFILTER_XT_MATCH_DCCP is not set ++# CONFIG_NETFILTER_XT_MATCH_DSCP is not set ++CONFIG_NETFILTER_XT_MATCH_ESP=m ++# CONFIG_NETFILTER_XT_MATCH_HELPER is not set ++CONFIG_NETFILTER_XT_MATCH_LENGTH=m ++CONFIG_NETFILTER_XT_MATCH_LIMIT=m ++CONFIG_NETFILTER_XT_MATCH_MAC=m ++CONFIG_NETFILTER_XT_MATCH_MARK=m ++# CONFIG_NETFILTER_XT_MATCH_POLICY is not set ++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m ++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m ++# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set ++# CONFIG_NETFILTER_XT_MATCH_REALM is not set ++# CONFIG_NETFILTER_XT_MATCH_SCTP is not set ++CONFIG_NETFILTER_XT_MATCH_STATE=m ++# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set ++# CONFIG_NETFILTER_XT_MATCH_STRING is not set ++# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set ++ ++# ++# IP: Netfilter Configuration ++# ++CONFIG_IP_NF_CONNTRACK=m ++# CONFIG_IP_NF_CT_ACCT is not set ++# CONFIG_IP_NF_CONNTRACK_MARK is not set ++# CONFIG_IP_NF_CONNTRACK_EVENTS is not set ++# CONFIG_IP_NF_CT_PROTO_SCTP is not set ++CONFIG_IP_NF_FTP=m ++CONFIG_IP_NF_IRC=m ++# CONFIG_IP_NF_NETBIOS_NS is not set ++CONFIG_IP_NF_TFTP=m ++# CONFIG_IP_NF_AMANDA is not set ++# CONFIG_IP_NF_PPTP is not set ++# CONFIG_IP_NF_H323 is not set ++# CONFIG_IP_NF_SIP is not set ++# CONFIG_IP_NF_QUEUE is not set ++CONFIG_IP_NF_IPTABLES=m ++CONFIG_IP_NF_MATCH_IPRANGE=m ++# CONFIG_IP_NF_MATCH_TOS is not set ++# CONFIG_IP_NF_MATCH_RECENT is not set ++# CONFIG_IP_NF_MATCH_ECN is not set ++# CONFIG_IP_NF_MATCH_AH is not set ++# CONFIG_IP_NF_MATCH_TTL is not set ++# CONFIG_IP_NF_MATCH_OWNER is not set ++# CONFIG_IP_NF_MATCH_ADDRTYPE is not set ++# CONFIG_IP_NF_MATCH_HASHLIMIT is not set ++CONFIG_IP_NF_FILTER=m ++CONFIG_IP_NF_TARGET_REJECT=m ++# CONFIG_IP_NF_TARGET_LOG is not set ++# CONFIG_IP_NF_TARGET_ULOG is not set ++# CONFIG_IP_NF_TARGET_TCPMSS is not set ++CONFIG_IP_NF_NAT=m ++CONFIG_IP_NF_NAT_NEEDED=y ++CONFIG_IP_NF_TARGET_MASQUERADE=m ++CONFIG_IP_NF_TARGET_REDIRECT=m ++CONFIG_IP_NF_TARGET_NETMAP=m ++CONFIG_IP_NF_TARGET_SAME=m ++# CONFIG_IP_NF_NAT_SNMP_BASIC is not set ++CONFIG_IP_NF_NAT_IRC=m ++CONFIG_IP_NF_NAT_FTP=m ++CONFIG_IP_NF_NAT_TFTP=m ++CONFIG_IP_NF_MANGLE=m ++CONFIG_IP_NF_TARGET_TOS=m ++CONFIG_IP_NF_TARGET_ECN=m ++CONFIG_IP_NF_TARGET_TTL=m ++CONFIG_IP_NF_RAW=m ++CONFIG_IP_NF_ARPTABLES=m ++CONFIG_IP_NF_ARPFILTER=m ++CONFIG_IP_NF_ARP_MANGLE=m ++ ++# ++# DCCP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_DCCP is not set ++ ++# ++# SCTP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_SCTP is not set ++ ++# ++# TIPC Configuration (EXPERIMENTAL) ++# ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++ ++# ++# QoS and/or fair queueing ++# ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++CONFIG_IEEE80211=m ++CONFIG_IEEE80211_DEBUG=y ++CONFIG_IEEE80211_CRYPT_WEP=m ++CONFIG_IEEE80211_CRYPT_CCMP=m ++CONFIG_IEEE80211_CRYPT_TKIP=m ++CONFIG_IEEE80211_SOFTMAC=m ++CONFIG_IEEE80211_SOFTMAC_DEBUG=y ++CONFIG_WIRELESS_EXT=y ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=m ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_SYS_HYPERVISOR is not set ++ ++# ++# Connector - unified userspace <-> kernelspace linker ++# ++# CONFIG_CONNECTOR is not set ++ ++# ++# Memory Technology Devices (MTD) ++# ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++CONFIG_MTD_CONCAT=y ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++# CONFIG_MTD_CMDLINE_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++CONFIG_MTD_CFI=y ++CONFIG_MTD_JEDECPROBE=y ++CONFIG_MTD_GEN_PROBE=y ++CONFIG_MTD_CFI_ADV_OPTIONS=y ++CONFIG_MTD_CFI_NOSWAP=y ++# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set ++# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set ++CONFIG_MTD_CFI_GEOMETRY=y ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++# CONFIG_MTD_CFI_I2 is not set ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_OTP is not set ++# CONFIG_MTD_CFI_INTELEXT is not set ++CONFIG_MTD_CFI_AMDSTD=y ++# CONFIG_MTD_CFI_STAA is not set ++CONFIG_MTD_CFI_UTIL=y ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++# CONFIG_MTD_OBSOLETE_CHIPS is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++CONFIG_MTD_PHYSMAP=y ++CONFIG_MTD_PHYSMAP_START=0xffc00000 ++CONFIG_MTD_PHYSMAP_LEN=0x400000 ++CONFIG_MTD_PHYSMAP_BANKWIDTH=1 ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_PMC551 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++ ++# ++# NAND Flash Device Drivers ++# ++# CONFIG_MTD_NAND is not set ++ ++# ++# OneNAND Flash Device Drivers ++# ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# Parallel port support ++# ++# CONFIG_PARPORT is not set ++ ++# ++# Plug and Play support ++# ++ ++# ++# Block devices ++# ++# CONFIG_BLK_DEV_FD is not set ++# CONFIG_BLK_CPQ_DA is not set ++# CONFIG_BLK_CPQ_CISS_DA is not set ++# CONFIG_BLK_DEV_DAC960 is not set ++# CONFIG_BLK_DEV_UMEM is not set ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_SX8 is not set ++# CONFIG_BLK_DEV_UB is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=2 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ++CONFIG_BLK_DEV_INITRD=y ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++ ++# ++# ATA/ATAPI/MFM/RLL support ++# ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++CONFIG_CHR_DEV_SG=y ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++CONFIG_SCSI_MULTI_LUN=y ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++ ++# ++# SCSI low-level drivers ++# ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set ++# CONFIG_SCSI_3W_9XXX is not set ++# CONFIG_SCSI_ACARD is not set ++# CONFIG_SCSI_AACRAID is not set ++# CONFIG_SCSI_AIC7XXX is not set ++# CONFIG_SCSI_AIC7XXX_OLD is not set ++# CONFIG_SCSI_AIC79XX is not set ++# CONFIG_SCSI_AIC94XX is not set ++# CONFIG_SCSI_DPT_I2O is not set ++# CONFIG_SCSI_ARCMSR is not set ++# CONFIG_MEGARAID_NEWGEN is not set ++# CONFIG_MEGARAID_LEGACY is not set ++# CONFIG_MEGARAID_SAS is not set ++# CONFIG_SCSI_HPTIOP is not set ++# CONFIG_SCSI_BUSLOGIC is not set ++# CONFIG_SCSI_DMX3191D is not set ++# CONFIG_SCSI_EATA is not set ++# CONFIG_SCSI_FUTURE_DOMAIN is not set ++# CONFIG_SCSI_GDTH is not set ++# CONFIG_SCSI_IPS is not set ++# CONFIG_SCSI_INITIO is not set ++# CONFIG_SCSI_INIA100 is not set ++# CONFIG_SCSI_STEX is not set ++# CONFIG_SCSI_SYM53C8XX_2 is not set ++# CONFIG_SCSI_IPR is not set ++# CONFIG_SCSI_QLOGIC_1280 is not set ++# CONFIG_SCSI_QLA_FC is not set ++# CONFIG_SCSI_QLA_ISCSI is not set ++# CONFIG_SCSI_LPFC is not set ++# CONFIG_SCSI_DC395x is not set ++# CONFIG_SCSI_DC390T is not set ++# CONFIG_SCSI_NSP32 is not set ++# CONFIG_SCSI_DEBUG is not set ++ ++# ++# Serial ATA (prod) and Parallel ATA (experimental) drivers ++# ++CONFIG_ATA=y ++# CONFIG_SATA_AHCI is not set ++# CONFIG_SATA_SVW is not set ++# CONFIG_ATA_PIIX is not set ++# CONFIG_SATA_MV is not set ++# CONFIG_SATA_NV is not set ++# CONFIG_PDC_ADMA is not set ++# CONFIG_SATA_QSTOR is not set ++# CONFIG_SATA_PROMISE is not set ++# CONFIG_SATA_SX4 is not set ++# CONFIG_SATA_SIL is not set ++# CONFIG_SATA_SIL24 is not set ++# CONFIG_SATA_SIS is not set ++# CONFIG_SATA_ULI is not set ++# CONFIG_SATA_VIA is not set ++# CONFIG_SATA_VITESSE is not set ++# CONFIG_PATA_ALI is not set ++# CONFIG_PATA_AMD is not set ++# CONFIG_PATA_ARTOP is not set ++# CONFIG_PATA_ATIIXP is not set ++# CONFIG_PATA_CMD64X is not set ++# CONFIG_PATA_CS5520 is not set ++# CONFIG_PATA_CS5530 is not set ++# CONFIG_PATA_CYPRESS is not set ++# CONFIG_PATA_EFAR is not set ++# CONFIG_ATA_GENERIC is not set ++# CONFIG_PATA_HPT366 is not set ++# CONFIG_PATA_HPT37X is not set ++# CONFIG_PATA_HPT3X2N is not set ++# CONFIG_PATA_HPT3X3 is not set ++# CONFIG_PATA_IT821X is not set ++# CONFIG_PATA_JMICRON is not set ++# CONFIG_PATA_TRIFLEX is not set ++# CONFIG_PATA_MPIIX is not set ++# CONFIG_PATA_OLDPIIX is not set ++# CONFIG_PATA_NETCELL is not set ++# CONFIG_PATA_NS87410 is not set ++# CONFIG_PATA_OPTI is not set ++# CONFIG_PATA_OPTIDMA is not set ++# CONFIG_PATA_PDC_OLD is not set ++# CONFIG_PATA_RADISYS is not set ++# CONFIG_PATA_RZ1000 is not set ++# CONFIG_PATA_SC1200 is not set ++# CONFIG_PATA_SERVERWORKS is not set ++# CONFIG_PATA_PDC2027X is not set ++CONFIG_PATA_SIL680=y ++# CONFIG_PATA_SIS is not set ++# CONFIG_PATA_VIA is not set ++# CONFIG_PATA_WINBOND is not set ++ ++# ++# Multi-device support (RAID and LVM) ++# ++# CONFIG_MD is not set ++ ++# ++# Fusion MPT device support ++# ++# CONFIG_FUSION is not set ++# CONFIG_FUSION_SPI is not set ++# CONFIG_FUSION_FC is not set ++# CONFIG_FUSION_SAS is not set ++ ++# ++# IEEE 1394 (FireWire) support ++# ++# CONFIG_IEEE1394 is not set ++ ++# ++# I2O device support ++# ++# CONFIG_I2O is not set ++ ++# ++# Macintosh device drivers ++# ++# CONFIG_WINDFARM is not set ++ ++# ++# Network device support ++# ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_EQUALIZER is not set ++CONFIG_TUN=m ++ ++# ++# ARCnet devices ++# ++# CONFIG_ARCNET is not set ++ ++# ++# PHY device support ++# ++ ++# ++# Ethernet (10 or 100Mbit) ++# ++# CONFIG_NET_ETHERNET is not set ++ ++# ++# Ethernet (1000 Mbit) ++# ++# CONFIG_ACENIC is not set ++# CONFIG_DL2K is not set ++# CONFIG_E1000 is not set ++# CONFIG_NS83820 is not set ++# CONFIG_HAMACHI is not set ++# CONFIG_YELLOWFIN is not set ++CONFIG_R8169=y ++# CONFIG_R8169_NAPI is not set ++# CONFIG_SIS190 is not set ++# CONFIG_SKGE is not set ++# CONFIG_SKY2 is not set ++# CONFIG_SK98LIN is not set ++# CONFIG_TIGON3 is not set ++# CONFIG_BNX2 is not set ++# CONFIG_QLA3XXX is not set ++ ++# ++# Ethernet (10000 Mbit) ++# ++# CONFIG_CHELSIO_T1 is not set ++# CONFIG_IXGB is not set ++# CONFIG_S2IO is not set ++# CONFIG_MYRI10GE is not set ++ ++# ++# Token Ring devices ++# ++# CONFIG_TR is not set ++ ++# ++# Wireless LAN (non-hamradio) ++# ++CONFIG_NET_RADIO=y ++# CONFIG_NET_WIRELESS_RTNETLINK is not set ++ ++# ++# Obsolete Wireless cards support (pre-802.11) ++# ++# CONFIG_STRIP is not set ++ ++# ++# Wireless 802.11b ISA/PCI cards support ++# ++# CONFIG_IPW2100 is not set ++# CONFIG_IPW2200 is not set ++# CONFIG_AIRO is not set ++# CONFIG_HERMES is not set ++# CONFIG_ATMEL is not set ++ ++# ++# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support ++# ++# CONFIG_PRISM54 is not set ++# CONFIG_USB_ZD1201 is not set ++# CONFIG_HOSTAP is not set ++# CONFIG_BCM43XX is not set ++# CONFIG_ZD1211RW is not set ++CONFIG_NET_WIRELESS=y ++ ++# ++# Wan interfaces ++# ++# CONFIG_WAN is not set ++# CONFIG_FDDI is not set ++# CONFIG_HIPPI is not set ++# CONFIG_PPP is not set ++# CONFIG_SLIP is not set ++# CONFIG_NET_FC is not set ++# CONFIG_SHAPER is not set ++CONFIG_NETCONSOLE=y ++CONFIG_NETPOLL=y ++# CONFIG_NETPOLL_RX is not set ++# CONFIG_NETPOLL_TRAP is not set ++CONFIG_NET_POLL_CONTROLLER=y ++ ++# ++# ISDN subsystem ++# ++# CONFIG_ISDN is not set ++ ++# ++# Telephony Support ++# ++# CONFIG_PHONE is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++# CONFIG_INPUT_TSDEV is not set ++CONFIG_INPUT_EVDEV=m ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++# CONFIG_INPUT_KEYBOARD is not set ++# CONFIG_INPUT_MOUSE is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++CONFIG_INPUT_MISC=y ++CONFIG_INPUT_UINPUT=m ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++# CONFIG_SERIO_I8042 is not set ++CONFIG_SERIO_SERPORT=y ++# CONFIG_SERIO_PCIPS2 is not set ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++CONFIG_SERIAL_8250_CONSOLE=y ++CONFIG_SERIAL_8250_PCI=y ++CONFIG_SERIAL_8250_NR_UARTS=4 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++# CONFIG_SERIAL_8250_EXTENDED is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++# CONFIG_SERIAL_JSM is not set ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++ ++# ++# IPMI ++# ++# CONFIG_IPMI_HANDLER is not set ++ ++# ++# Watchdog Cards ++# ++# CONFIG_WATCHDOG is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_GEN_RTC is not set ++# CONFIG_DTLK is not set ++# CONFIG_R3964 is not set ++# CONFIG_APPLICOM is not set ++ ++# ++# Ftape, the floppy tape device driver ++# ++# CONFIG_AGP is not set ++# CONFIG_DRM is not set ++# CONFIG_RAW_DRIVER is not set ++ ++# ++# TPM devices ++# ++# CONFIG_TCG_TPM is not set ++# CONFIG_TELCLOCK is not set ++ ++# ++# I2C support ++# ++CONFIG_I2C=y ++CONFIG_I2C_CHARDEV=y ++ ++# ++# I2C Algorithms ++# ++# CONFIG_I2C_ALGOBIT is not set ++# CONFIG_I2C_ALGOPCF is not set ++# CONFIG_I2C_ALGOPCA is not set ++ ++# ++# I2C Hardware Bus support ++# ++# CONFIG_I2C_ALI1535 is not set ++# CONFIG_I2C_ALI1563 is not set ++# CONFIG_I2C_ALI15X3 is not set ++# CONFIG_I2C_AMD756 is not set ++# CONFIG_I2C_AMD8111 is not set ++# CONFIG_I2C_I801 is not set ++# CONFIG_I2C_I810 is not set ++# CONFIG_I2C_PIIX4 is not set ++CONFIG_I2C_MPC=y ++# CONFIG_I2C_NFORCE2 is not set ++# CONFIG_I2C_OCORES is not set ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_PROSAVAGE is not set ++# CONFIG_I2C_SAVAGE4 is not set ++# CONFIG_I2C_SIS5595 is not set ++# CONFIG_I2C_SIS630 is not set ++# CONFIG_I2C_SIS96X is not set ++# CONFIG_I2C_STUB is not set ++# CONFIG_I2C_VIA is not set ++# CONFIG_I2C_VIAPRO is not set ++# CONFIG_I2C_VOODOO3 is not set ++# CONFIG_I2C_PCA_ISA is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_SENSORS_DS1337 is not set ++# CONFIG_SENSORS_DS1374 is not set ++CONFIG_SENSORS_EEPROM=m ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_SENSORS_M41T00 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++ ++# ++# SPI support ++# ++# CONFIG_SPI is not set ++# CONFIG_SPI_MASTER is not set ++ ++# ++# Dallas's 1-wire bus ++# ++ ++# ++# Hardware Monitoring support ++# ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_ABITUGURU is not set ++# CONFIG_SENSORS_ADM1021 is not set ++# CONFIG_SENSORS_ADM1025 is not set ++# CONFIG_SENSORS_ADM1026 is not set ++# CONFIG_SENSORS_ADM1031 is not set ++# CONFIG_SENSORS_ADM9240 is not set ++# CONFIG_SENSORS_ASB100 is not set ++# CONFIG_SENSORS_ATXP1 is not set ++# CONFIG_SENSORS_DS1621 is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_FSCHER is not set ++# CONFIG_SENSORS_FSCPOS is not set ++# CONFIG_SENSORS_GL518SM is not set ++# CONFIG_SENSORS_GL520SM is not set ++# CONFIG_SENSORS_IT87 is not set ++# CONFIG_SENSORS_LM63 is not set ++# CONFIG_SENSORS_LM75 is not set ++# CONFIG_SENSORS_LM77 is not set ++# CONFIG_SENSORS_LM78 is not set ++# CONFIG_SENSORS_LM80 is not set ++# CONFIG_SENSORS_LM83 is not set ++# CONFIG_SENSORS_LM85 is not set ++# CONFIG_SENSORS_LM87 is not set ++# CONFIG_SENSORS_LM90 is not set ++# CONFIG_SENSORS_LM92 is not set ++# CONFIG_SENSORS_MAX1619 is not set ++# CONFIG_SENSORS_PC87360 is not set ++# CONFIG_SENSORS_SIS5595 is not set ++# CONFIG_SENSORS_SMSC47M1 is not set ++# CONFIG_SENSORS_SMSC47M192 is not set ++# CONFIG_SENSORS_SMSC47B397 is not set ++# CONFIG_SENSORS_VIA686A is not set ++# CONFIG_SENSORS_VT1211 is not set ++# CONFIG_SENSORS_VT8231 is not set ++# CONFIG_SENSORS_W83781D is not set ++# CONFIG_SENSORS_W83791D is not set ++# CONFIG_SENSORS_W83792D is not set ++# CONFIG_SENSORS_W83L785TS is not set ++# CONFIG_SENSORS_W83627HF is not set ++# CONFIG_SENSORS_W83627EHF is not set ++# CONFIG_HWMON_DEBUG_CHIP is not set ++ ++# ++# Misc devices ++# ++# CONFIG_TIFM_CORE is not set ++ ++# ++# Multimedia devices ++# ++# CONFIG_VIDEO_DEV is not set ++ ++# ++# Digital Video Broadcasting Devices ++# ++# CONFIG_DVB is not set ++# CONFIG_USB_DABUSB is not set ++ ++# ++# Graphics support ++# ++CONFIG_FIRMWARE_EDID=y ++# CONFIG_FB is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Sound ++# ++# CONFIG_SOUND is not set ++ ++# ++# USB support ++# ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++CONFIG_USB_ARCH_HAS_EHCI=y ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++# CONFIG_USB_BANDWIDTH is not set ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_OTG is not set ++ ++# ++# USB Host Controller Drivers ++# ++CONFIG_USB_EHCI_HCD=y ++# CONFIG_USB_EHCI_SPLIT_ISO is not set ++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set ++# CONFIG_USB_EHCI_TT_NEWSCHED is not set ++# CONFIG_USB_ISP116X_HCD is not set ++CONFIG_USB_OHCI_HCD=y ++# CONFIG_USB_OHCI_BIG_ENDIAN is not set ++CONFIG_USB_OHCI_LITTLE_ENDIAN=y ++# CONFIG_USB_UHCI_HCD is not set ++# CONFIG_USB_SL811_HCD is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_ACM is not set ++# CONFIG_USB_PRINTER is not set ++ ++# ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' ++# ++ ++# ++# may also be needed; see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=m ++# CONFIG_USB_STORAGE_DEBUG is not set ++# CONFIG_USB_STORAGE_DATAFAB is not set ++# CONFIG_USB_STORAGE_FREECOM is not set ++# CONFIG_USB_STORAGE_DPCM is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++# CONFIG_USB_STORAGE_ALAUDA is not set ++# CONFIG_USB_STORAGE_ONETOUCH is not set ++# CONFIG_USB_STORAGE_KARMA is not set ++# CONFIG_USB_LIBUSUAL is not set ++ ++# ++# USB Input Devices ++# ++# CONFIG_USB_HID is not set ++ ++# ++# USB HID Boot Protocol drivers ++# ++# CONFIG_USB_KBD is not set ++# CONFIG_USB_MOUSE is not set ++# CONFIG_USB_AIPTEK is not set ++# CONFIG_USB_WACOM is not set ++# CONFIG_USB_ACECAD is not set ++# CONFIG_USB_KBTAB is not set ++# CONFIG_USB_POWERMATE is not set ++# CONFIG_USB_TOUCHSCREEN is not set ++# CONFIG_USB_YEALINK is not set ++# CONFIG_USB_XPAD is not set ++# CONFIG_USB_ATI_REMOTE is not set ++# CONFIG_USB_ATI_REMOTE2 is not set ++# CONFIG_USB_KEYSPAN_REMOTE is not set ++# CONFIG_USB_APPLETOUCH is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB Network Adapters ++# ++# CONFIG_USB_CATC is not set ++# CONFIG_USB_KAWETH is not set ++# CONFIG_USB_PEGASUS is not set ++# CONFIG_USB_RTL8150 is not set ++# CONFIG_USB_USBNET is not set ++CONFIG_USB_MON=y ++ ++# ++# USB port drivers ++# ++ ++# ++# USB Serial Converter support ++# ++CONFIG_USB_SERIAL=y ++CONFIG_USB_SERIAL_CONSOLE=y ++# CONFIG_USB_SERIAL_GENERIC is not set ++# CONFIG_USB_SERIAL_AIRCABLE is not set ++# CONFIG_USB_SERIAL_AIRPRIME is not set ++# CONFIG_USB_SERIAL_ARK3116 is not set ++# CONFIG_USB_SERIAL_BELKIN is not set ++# CONFIG_USB_SERIAL_WHITEHEAT is not set ++# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set ++# CONFIG_USB_SERIAL_CP2101 is not set ++# CONFIG_USB_SERIAL_CYPRESS_M8 is not set ++# CONFIG_USB_SERIAL_EMPEG is not set ++CONFIG_USB_SERIAL_FTDI_SIO=y ++# CONFIG_USB_SERIAL_FUNSOFT is not set ++# CONFIG_USB_SERIAL_VISOR is not set ++# CONFIG_USB_SERIAL_IPAQ is not set ++# CONFIG_USB_SERIAL_IR is not set ++# CONFIG_USB_SERIAL_EDGEPORT is not set ++# CONFIG_USB_SERIAL_EDGEPORT_TI is not set ++# CONFIG_USB_SERIAL_GARMIN is not set ++# CONFIG_USB_SERIAL_IPW is not set ++# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set ++# CONFIG_USB_SERIAL_KEYSPAN is not set ++# CONFIG_USB_SERIAL_KLSI is not set ++# CONFIG_USB_SERIAL_KOBIL_SCT is not set ++# CONFIG_USB_SERIAL_MCT_U232 is not set ++# CONFIG_USB_SERIAL_MOS7840 is not set ++# CONFIG_USB_SERIAL_NAVMAN is not set ++# CONFIG_USB_SERIAL_PL2303 is not set ++# CONFIG_USB_SERIAL_HP4X is not set ++# CONFIG_USB_SERIAL_SAFE is not set ++# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set ++# CONFIG_USB_SERIAL_TI is not set ++# CONFIG_USB_SERIAL_CYBERJACK is not set ++# CONFIG_USB_SERIAL_XIRCOM is not set ++# CONFIG_USB_SERIAL_OPTION is not set ++# CONFIG_USB_SERIAL_OMNINET is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_AUERSWALD is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_SISUSBVGA is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TEST is not set ++ ++# ++# USB DSL modem support ++# ++ ++# ++# USB Gadget Support ++# ++# CONFIG_USB_GADGET is not set ++ ++# ++# MMC/SD Card support ++# ++# CONFIG_MMC is not set ++ ++# ++# LED devices ++# ++# CONFIG_NEW_LEDS is not set ++ ++# ++# LED drivers ++# ++ ++# ++# LED Triggers ++# ++ ++# ++# InfiniBand support ++# ++# CONFIG_INFINIBAND is not set ++ ++# ++# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) ++# ++ ++# ++# Real Time Clock ++# ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_HCTOSYS=y ++CONFIG_RTC_HCTOSYS_DEVICE="rtc0" ++# CONFIG_RTC_DEBUG is not set ++ ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++ ++# ++# RTC drivers ++# ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set ++CONFIG_RTC_DRV_RS5C372=y ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_TEST is not set ++# CONFIG_RTC_DRV_V3020 is not set ++ ++# ++# DMA Engine support ++# ++# CONFIG_DMA_ENGINE is not set ++ ++# ++# DMA Clients ++# ++ ++# ++# DMA Devices ++# ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++# CONFIG_EXT3_FS_POSIX_ACL is not set ++# CONFIG_EXT3_FS_SECURITY is not set ++# CONFIG_EXT4DEV_FS is not set ++CONFIG_JBD=y ++# CONFIG_JBD_DEBUG is not set ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_ROMFS_FS is not set ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++CONFIG_DNOTIFY=y ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++CONFIG_ISO9660_FS=m ++CONFIG_JOLIET=y ++CONFIG_ZISOFS=y ++CONFIG_ZISOFS_FS=m ++CONFIG_UDF_FS=m ++CONFIG_UDF_NLS=y ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=m ++CONFIG_MSDOS_FS=m ++CONFIG_VFAT_FS=m ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++CONFIG_NTFS_FS=m ++# CONFIG_NTFS_DEBUG is not set ++# CONFIG_NTFS_RW is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_KCORE=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++CONFIG_RAMFS=y ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++# CONFIG_JFFS_FS is not set ++# CONFIG_JFFS2_FS is not set ++# CONFIG_CRAMFS is not set ++# CONFIG_VXFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Network File Systems ++# ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++CONFIG_NFS_V3_ACL=y ++CONFIG_NFS_V4=y ++# CONFIG_NFS_DIRECTIO is not set ++CONFIG_NFSD=m ++CONFIG_NFSD_V3=y ++# CONFIG_NFSD_V3_ACL is not set ++# CONFIG_NFSD_V4 is not set ++CONFIG_NFSD_TCP=y ++CONFIG_ROOT_NFS=y ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_EXPORTFS=m ++CONFIG_NFS_ACL_SUPPORT=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++CONFIG_SUNRPC_GSS=y ++CONFIG_RPCSEC_GSS_KRB5=y ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++# CONFIG_9P_FS is not set ++ ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++ ++# ++# Native Language Support ++# ++CONFIG_NLS=m ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=m ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=m ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++CONFIG_NLS_UTF8=m ++ ++# ++# Library routines ++# ++# CONFIG_CRC_CCITT is not set ++# CONFIG_CRC16 is not set ++CONFIG_CRC32=y ++CONFIG_LIBCRC32C=m ++CONFIG_ZLIB_INFLATE=m ++CONFIG_ZLIB_DEFLATE=m ++CONFIG_PLIST=y ++ ++# ++# Instrumentation Support ++# ++CONFIG_PROFILING=y ++CONFIG_OPROFILE=m ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++CONFIG_DEBUG_KERNEL=y ++CONFIG_LOG_BUF_SHIFT=14 ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_DEBUG_SLAB is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++# CONFIG_DEBUG_MUTEXES is not set ++# CONFIG_DEBUG_RWSEMS is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++# CONFIG_DEBUG_INFO is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_LIST is not set ++CONFIG_FORCED_INLINING=y ++# CONFIG_HEADERS_CHECK is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_DEBUGGER is not set ++# CONFIG_BDI_SWITCH is not set ++# CONFIG_BOOTX_TEXT is not set ++# CONFIG_SERIAL_TEXT_DEBUG is not set ++# CONFIG_PPC_EARLY_DEBUG is not set ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++ ++# ++# Cryptographic options ++# ++CONFIG_CRYPTO=y ++CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_MANAGER=m ++# CONFIG_CRYPTO_HMAC is not set ++# CONFIG_CRYPTO_NULL is not set ++CONFIG_CRYPTO_MD4=m ++CONFIG_CRYPTO_MD5=y ++CONFIG_CRYPTO_SHA1=m ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_WP512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_ECB is not set ++# CONFIG_CRYPTO_CBC is not set ++CONFIG_CRYPTO_DES=y ++CONFIG_CRYPTO_BLOWFISH=m ++CONFIG_CRYPTO_TWOFISH=m ++CONFIG_CRYPTO_TWOFISH_COMMON=m ++CONFIG_CRYPTO_SERPENT=m ++CONFIG_CRYPTO_AES=m ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++# CONFIG_CRYPTO_TEA is not set ++CONFIG_CRYPTO_ARC4=m ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++CONFIG_CRYPTO_DEFLATE=m ++CONFIG_CRYPTO_MICHAEL_MIC=m ++CONFIG_CRYPTO_CRC32C=m ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Hardware crypto devices ++# +diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig +index 234a861..c1c6748 100644 +--- a/arch/powerpc/platforms/embedded6xx/Kconfig ++++ b/arch/powerpc/platforms/embedded6xx/Kconfig +@@ -76,6 +76,15 @@ config PRPMC800 + Select SANDPOINT if configuring for a Motorola Sandpoint X3 + (any flavor). + ++config LINKSTATION ++ bool "Linkstation / Kurobox(HG) from Buffalo" ++ select MPIC ++ select FSL_SOC ++ select PPC_UDBG_16550 if SERIAL_8250 ++ help ++ Select LINKSTATION if configuring for a PPC-based Linkstation ++ (LS-1) or Kurobox(HG) from Buffalo Technologies. ++ + config MPC7448HPC2 + bool "Freescale MPC7448HPC2(Taiga)" + select TSI108_BRIDGE +@@ -210,7 +219,7 @@ config PPC_GEN550 + depends on SANDPOINT || SPRUCE || PPLUS || \ + PRPMC750 || PRPMC800 || LOPEC || \ + (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ +- 83xx ++ 83xx || LINKSTATION + default y + + config FORCE +@@ -284,13 +293,13 @@ config HARRIER + + config MPC10X_BRIDGE + bool +- depends on POWERPMC250 || LOPEC || SANDPOINT ++ depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION + select PPC_INDIRECT_PCI + default y + + config MPC10X_OPENPIC + bool +- depends on POWERPMC250 || LOPEC || SANDPOINT ++ depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION + default y + + config MPC10X_STORE_GATHERING +diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile +index fa499fe..1f3edc7 100644 +--- a/arch/powerpc/platforms/embedded6xx/Makefile ++++ b/arch/powerpc/platforms/embedded6xx/Makefile +@@ -3,3 +3,4 @@ # + # + obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o + obj-$(CONFIG_SANDPOINT) += sandpoint.o ++obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o +diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c +new file mode 100644 +index 0000000..30bcb5b +--- /dev/null ++++ b/arch/powerpc/platforms/embedded6xx/linkstation.c +@@ -0,0 +1,254 @@ ++/* ++ * arch/powerpc/platforms/embedded6xx/linkstation.c ++ * ++ * Board setup routines for the Buffalo Linkstation / Kurobox Platform. ++ * ++ * Author: Mark A. Greer ++ * mgreer@mvista.com ++ * ++ * 2000-2003 (c) MontaVista Software, Inc. This file is licensed under ++ * the terms of the GNU General Public License version 2. This program ++ * is licensed "as is" without any warranty of any kind, whether express ++ * or implied. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include /* for linux/serial_core.h */ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static struct mtd_partition linkstation_physmap_partitions[] = { ++ { ++ .name = "mtd_firmimg", ++ .offset = 0x000000, ++ .size = 0x300000, ++ }, ++ { ++ .name = "mtd_bootcode", ++ .offset = 0x300000, ++ .size = 0x70000, ++ }, ++ { ++ .name = "mtd_status", ++ .offset = 0x370000, ++ .size = 0x10000, ++ }, ++ { ++ .name = "mtd_conf", ++ .offset = 0x380000, ++ .size = 0x80000, ++ }, ++ { ++ .name = "mtd_allflash", ++ .offset = 0x000000, ++ .size = 0x400000, ++ }, ++ { ++ .name = "mtd_data", ++ .offset = 0x310000, ++ .size = 0xf0000, ++ }, ++}; ++ ++/* ++ * Buffalo linkstation interrupt routing. ++ */ ++ ++void __init linkstation_pcibios_fixup(void) ++{ ++ struct pci_dev *dev = NULL; ++ ++ for_each_pci_dev(dev) ++ pci_read_irq_line(dev); ++} ++ ++static int __init add_bridge(struct device_node *dev) ++{ ++ int len; ++ struct pci_controller *hose; ++ int *bus_range; ++ ++ printk("Adding PCI host bridge %s\n", dev->full_name); ++ ++ bus_range = (int *) get_property(dev, "bus-range", &len); ++ if (bus_range == NULL || len < 2 * sizeof(int)) ++ printk(KERN_WARNING "Can't get bus-range for %s, assume" ++ " bus 0\n", dev->full_name); ++ ++ hose = pcibios_alloc_controller(); ++ if (hose == NULL) ++ return -ENOMEM; ++ hose->first_busno = bus_range ? bus_range[0] : 0; ++ hose->last_busno = bus_range ? bus_range[1] : 0xff; ++ hose->arch_data = dev; ++ setup_indirect_pci(hose, 0xfec00000, 0xfee00000); ++ ++ /* Interpret the "ranges" property */ ++ /* This also maps the I/O region and sets isa_io/mem_base */ ++ pci_process_bridge_OF_ranges(hose, dev, 1); ++ ++ return 0; ++} ++ ++static void __init linkstation_setup_arch(void) ++{ ++ struct device_node *np; ++#ifdef CONFIG_MTD_PHYSMAP ++ physmap_set_partitions(linkstation_physmap_partitions, ++ ARRAY_SIZE(linkstation_physmap_partitions)); ++#endif ++ ++#ifdef CONFIG_BLK_DEV_INITRD ++ if (initrd_start) ++ ROOT_DEV = Root_RAM0; ++ else ++#endif ++#ifdef CONFIG_ROOT_NFS ++ ROOT_DEV = Root_NFS; ++#else ++ ROOT_DEV = Root_HDA1; ++#endif ++ ++ /* Lookup PCI host bridges */ ++ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) ++ add_bridge(np); ++ ++ ppc_md.pci_swizzle = common_swizzle; ++ ++ printk(KERN_INFO "BUFFALO Network Attached Storage Series\n"); ++ printk(KERN_INFO "(C) 2002-2005 BUFFALO INC.\n"); ++} ++ ++/* ++ * Interrupt setup and service. Interrrupts on the linkstation come ++ * from the four PCI slots plus onboard 8241 devices: I2C, DUART. ++ */ ++static void __init linkstation_init_IRQ(void) ++{ ++ struct mpic *mpic; ++ struct device_node *dnp; ++ void *prop; ++ int size; ++ phys_addr_t paddr; ++ ++ dnp = of_find_node_by_type(NULL, "open-pic"); ++ if (dnp == NULL) ++ return; ++ ++ prop = (struct device_node *)get_property(dnp, "reg", &size); ++ paddr = (phys_addr_t)of_translate_address(dnp, prop); ++ ++ mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC "); ++ BUG_ON(mpic == NULL); ++ ++ /* PCI IRQs */ ++ mpic_assign_isu(mpic, 0, paddr + 0x10200); ++ ++ /* I2C */ ++ mpic_assign_isu(mpic, 1, paddr + 0x11000); ++ ++ /* ttyS0, ttyS1 */ ++ mpic_assign_isu(mpic, 2, paddr + 0x11100); ++ ++ mpic_init(mpic); ++} ++ ++extern void avr_uart_configure(void); ++extern void avr_uart_send(const char); ++ ++static void linkstation_restart(char *cmd) ++{ ++ local_irq_disable(); ++ ++ /* Reset system via AVR */ ++ avr_uart_configure(); ++ /* Send reboot command */ ++ avr_uart_send('C'); ++ ++ for(;;) /* Spin until reset happens */ ++ avr_uart_send('G'); /* "kick" */ ++} ++ ++static void linkstation_power_off(void) ++{ ++ local_irq_disable(); ++ ++ avr_uart_configure(); ++ /* send shutdown command */ ++ avr_uart_send('E'); ++ ++ for(;;) /* Spin until power-off happens */ ++ avr_uart_send('G'); /* "kick" */ ++ /* NOTREACHED */ ++} ++ ++static void linkstation_halt(void) ++{ ++ linkstation_power_off(); ++ /* NOTREACHED */ ++} ++ ++static void linkstation_show_cpuinfo(struct seq_file *m) ++{ ++ seq_printf(m, "vendor\t\t: Buffalo Technology\n"); ++ seq_printf(m, "machine\t\t: Linkstation I/Kurobox(HG)\n"); ++} ++ ++static int __init linkstation_probe(void) ++{ ++ unsigned long root; ++ ++ root = of_get_flat_dt_root(); ++ ++ if (!of_flat_dt_is_compatible(root, "linkstation")) ++ return 0; ++ return 1; ++} ++ ++define_machine(linkstation){ ++ .name = "Buffalo Linkstation", ++ .probe = linkstation_probe, ++ .setup_arch = linkstation_setup_arch, ++ .init_IRQ = linkstation_init_IRQ, ++ .show_cpuinfo = linkstation_show_cpuinfo, ++ .pcibios_fixup = linkstation_pcibios_fixup, ++ .get_irq = mpic_get_irq, ++ .restart = linkstation_restart, ++ .power_off = linkstation_power_off, ++ .halt = linkstation_halt, ++ .calibrate_decr = generic_calibrate_decr, ++}; +diff --git a/arch/powerpc/platforms/embedded6xx/ls_uart.c b/arch/powerpc/platforms/embedded6xx/ls_uart.c +new file mode 100644 +index 0000000..b640115 +--- /dev/null ++++ b/arch/powerpc/platforms/embedded6xx/ls_uart.c +@@ -0,0 +1,131 @@ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static void __iomem *avr_addr; ++static unsigned long avr_clock; ++ ++static struct work_struct wd_work; ++ ++static void wd_stop(void *unused) ++{ ++ const char string[] = "AAAAFFFFJJJJ>>>>VVVV>>>>ZZZZVVVVKKKK"; ++ int i = 0, rescue = 8; ++ int len = strlen(string); ++ ++ while (rescue--) { ++ int j; ++ char lsr = in_8(avr_addr + UART_LSR); ++ ++ if (lsr & (UART_LSR_THRE | UART_LSR_TEMT)) { ++ for (j = 0; j < 16 && i < len; j++, i++) ++ out_8(avr_addr + UART_TX, string[i]); ++ if (i == len) { ++ /* Read "OK" back: 4ms for the last "KKKK" ++ plus a couple bytes back */ ++ msleep(7); ++ printk("linkstation: disarming the AVR watchdog: "); ++ while (in_8(avr_addr + UART_LSR) & UART_LSR_DR) ++ printk("%c", in_8(avr_addr + UART_RX)); ++ break; ++ } ++ } ++ msleep(17); ++ } ++ printk("\n"); ++} ++ ++#define AVR_QUOT(clock) ((clock) + 8 * 9600) / (16 * 9600) ++ ++void avr_uart_configure(void) ++{ ++ unsigned char cval = UART_LCR_WLEN8; ++ unsigned int quot = AVR_QUOT(avr_clock); ++ ++ if (!avr_addr || !avr_clock) ++ return; ++ ++ out_8(avr_addr + UART_LCR, cval); /* initialise UART */ ++ out_8(avr_addr + UART_MCR, 0); ++ out_8(avr_addr + UART_IER, 0); ++ ++ cval |= UART_LCR_STOP | UART_LCR_PARITY | UART_LCR_EPAR; ++ ++ out_8(avr_addr + UART_LCR, cval); /* Set character format */ ++ ++ out_8(avr_addr + UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ ++ out_8(avr_addr + UART_DLL, quot & 0xff); /* LS of divisor */ ++ out_8(avr_addr + UART_DLM, quot >> 8); /* MS of divisor */ ++ out_8(avr_addr + UART_LCR, cval); /* reset DLAB */ ++ out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO); /* enable FIFO */ ++} ++ ++void avr_uart_send(const char c) ++{ ++ if (!avr_addr || !avr_clock) ++ return; ++ ++ out_8(avr_addr + UART_TX, c); ++ out_8(avr_addr + UART_TX, c); ++ out_8(avr_addr + UART_TX, c); ++ out_8(avr_addr + UART_TX, c); ++} ++ ++static void __init ls_uart_init(void) ++{ ++ local_irq_disable(); ++ ++#ifndef CONFIG_SERIAL_8250 ++ out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO); /* enable FIFO */ ++ out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO | ++ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); /* clear FIFOs */ ++ out_8(avr_addr + UART_FCR, 0); ++ out_8(avr_addr + UART_IER, 0); ++ ++ /* Clear up interrupts */ ++ (void) in_8(avr_addr + UART_LSR); ++ (void) in_8(avr_addr + UART_RX); ++ (void) in_8(avr_addr + UART_IIR); ++ (void) in_8(avr_addr + UART_MSR); ++#endif ++ avr_uart_configure(); ++ ++ local_irq_enable(); ++} ++ ++static int __init ls_uarts_init(void) ++{ ++ struct device_node *avr; ++ phys_addr_t phys_addr; ++ int len; ++ ++ avr = of_find_node_by_path("/soc10x/serial@80004500"); ++ if (!avr) ++ return -EINVAL; ++ ++ avr_clock = *(u32*)get_property(avr, "clock-frequency", &len); ++ phys_addr = ((u32*)get_property(avr, "reg", &len))[0]; ++ ++ if (!avr_clock || !phys_addr) ++ return -EINVAL; ++ ++ avr_addr = ioremap(phys_addr, 32); ++ if (!avr_addr) ++ return -EFAULT; ++ ++ ls_uart_init(); ++ ++ INIT_WORK(&wd_work, wd_stop, NULL); ++ schedule_work(&wd_work); ++ ++ return 0; ++} ++ ++late_initcall(ls_uarts_init); +diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c +index f1c7575..25cd8de 100644 +--- a/drivers/net/r8169.c ++++ b/drivers/net/r8169.c +@@ -1396,41 +1396,6 @@ static void rtl8169_netpoll(struct net_d + } + #endif + +-static void __rtl8169_set_mac_addr(struct net_device *dev, void __iomem *ioaddr) +-{ +- unsigned int i, j; +- +- RTL_W8(Cfg9346, Cfg9346_Unlock); +- for (i = 0; i < 2; i++) { +- __le32 l = 0; +- +- for (j = 0; j < 4; j++) { +- l <<= 8; +- l |= dev->dev_addr[4*i + j]; +- } +- RTL_W32(MAC0 + 4*i, cpu_to_be32(l)); +- } +- RTL_W8(Cfg9346, Cfg9346_Lock); +-} +- +-static int rtl8169_set_mac_addr(struct net_device *dev, void *p) +-{ +- struct rtl8169_private *tp = netdev_priv(dev); +- struct sockaddr *addr = p; +- +- if (!is_valid_ether_addr(addr->sa_data)) +- return -EINVAL; +- +- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); +- +- if (netif_running(dev)) { +- spin_lock_irq(&tp->lock); +- __rtl8169_set_mac_addr(dev, tp->mmio_addr); +- spin_unlock_irq(&tp->lock); +- } +- return 0; +-} +- + static void rtl8169_release_board(struct pci_dev *pdev, struct net_device *dev, + void __iomem *ioaddr) + { +@@ -1680,7 +1645,6 @@ rtl8169_init_one(struct pci_dev *pdev, c + dev->stop = rtl8169_close; + dev->tx_timeout = rtl8169_tx_timeout; + dev->set_multicast_list = rtl8169_set_rx_mode; +- dev->set_mac_address = rtl8169_set_mac_addr; + dev->watchdog_timeo = RTL8169_TX_TIMEOUT; + dev->irq = pdev->irq; + dev->base_addr = (unsigned long) ioaddr; +@@ -1928,8 +1892,6 @@ rtl8169_hw_start(struct net_device *dev) + /* Enable all known interrupts by setting the interrupt mask. */ + RTL_W16(IntrMask, rtl8169_intr_mask); + +- __rtl8169_set_mac_addr(dev, ioaddr); +- + netif_start_queue(dev); + } + -- cgit v1.2.3